public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
	nadavh@marvell.com, neta@marvell.com, kostap@marvell.com,
	jinghua@marvell.com, mw@semihalf.com, jsd@semihalf.com
Subject: [platforms: PATCH v3 4/8] Marvell/Armada: Add support for DRAM remapping
Date: Wed, 25 Oct 2017 17:18:12 +0200	[thread overview]
Message-ID: <1508944693-16315-3-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1508944693-16315-1-git-send-email-mw@semihalf.com>

The Armada 70x0/80x0 DRAM controller allows a single window of DRAM
to be remapped to another location in the physical address space.
Since DRAM starts at address 0, and normally exceeds 4GB on these
systems, this allows us to free up some memory in the 32-bit
addressable region for peripheral MMIO and PCI MMIO32 and CONFIG
spaces.

This patch adjusts memory blocks to the configuration done in ARM-TF.
The remap parameters are otained directly from the registers. Moreover,
the configuration space base address is now configurable via PCD, so
that to satisfy a case, when remap is not enabled in the early firmware
and ensure, that PcdSystemMemorySize is not overlapping it.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
 Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0Lib.inf  |  2 +
 Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c | 90 +++++++++++++++-----
 Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h | 48 +++++++++++
 Platform/Marvell/Marvell.dec                                     |  3 +
 4 files changed, 124 insertions(+), 19 deletions(-)

diff --git a/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0Lib.inf b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0Lib.inf
index 2e198c3..2236d9f 100644
--- a/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0Lib.inf
+++ b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0Lib.inf
@@ -67,5 +67,7 @@
   gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
   gArmTokenSpaceGuid.PcdArmPrimaryCore
 
+  gMarvellTokenSpaceGuid.PcdConfigSpaceBaseAddress
+
 [Ppis]
   gArmMpCoreInfoPpiGuid
diff --git a/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c
index 74c9956..978e4d3 100644
--- a/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c
+++ b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.c
@@ -35,8 +35,12 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #include <Base.h>
 #include <Library/ArmPlatformLib.h>
 #include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/IoLib.h>
 #include <Library/MemoryAllocationLib.h>
 
+#include "Armada70x0LibMem.h"
+
 // The total number of descriptors, including the final "end-of-table" descriptor.
 #define MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS 16
 
@@ -44,6 +48,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #define DDR_ATTRIBUTES_CACHED           ARM_MEMORY_REGION_ATTRIBUTE_NONSECURE_WRITE_BACK
 #define DDR_ATTRIBUTES_UNCACHED         ARM_MEMORY_REGION_ATTRIBUTE_UNCACHED_UNBUFFERED
 
+STATIC ARM_MEMORY_REGION_DESCRIPTOR mVirtualMemoryTable[MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS];
+
 /**
   Return the Virtual Memory Map of your platform
 
@@ -59,35 +65,81 @@ ArmPlatformGetVirtualMemoryMap (
   IN ARM_MEMORY_REGION_DESCRIPTOR** VirtualMemoryMap
   )
 {
-  ARM_MEMORY_REGION_DESCRIPTOR  *VirtualMemoryTable;
   UINTN                         Index = 0;
+  UINT64                        MemSize;
+  UINT64                        MemLowSize;
+  UINT64                        MemHighStart;
+  UINT64                        MemHighSize;
+  UINT64                        ConfigSpaceBaseAddr;
+  EFI_RESOURCE_ATTRIBUTE_TYPE   ResourceAttributes;
 
   ASSERT (VirtualMemoryMap != NULL);
 
-  VirtualMemoryTable = (ARM_MEMORY_REGION_DESCRIPTOR*)AllocatePages(EFI_SIZE_TO_PAGES (sizeof(ARM_MEMORY_REGION_DESCRIPTOR) * MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS));
-  if (VirtualMemoryTable == NULL) {
-      return;
+  ConfigSpaceBaseAddr = FixedPcdGet64 (PcdConfigSpaceBaseAddress);
+
+  MemSize = FixedPcdGet64 (PcdSystemMemorySize);
+
+  if (DRAM_REMAP_ENABLED) {
+    MemLowSize = MIN (DRAM_REMAP_TARGET, MemSize);
+    MemHighStart = (UINT64)DRAM_REMAP_TARGET + DRAM_REMAP_SIZE;
+    MemHighSize = MemSize - MemLowSize;
+  } else {
+    MemLowSize = MIN (ConfigSpaceBaseAddr, MemSize);
   }
 
-  // DDR
-  VirtualMemoryTable[Index].PhysicalBase    = PcdGet64 (PcdSystemMemoryBase);
-  VirtualMemoryTable[Index].VirtualBase     = PcdGet64 (PcdSystemMemoryBase);
-  VirtualMemoryTable[Index].Length          = PcdGet64 (PcdSystemMemorySize);
-  VirtualMemoryTable[Index].Attributes      = DDR_ATTRIBUTES_CACHED;
+  ResourceAttributes = (
+      EFI_RESOURCE_ATTRIBUTE_PRESENT |
+      EFI_RESOURCE_ATTRIBUTE_INITIALIZED |
+      EFI_RESOURCE_ATTRIBUTE_WRITE_COMBINEABLE |
+      EFI_RESOURCE_ATTRIBUTE_WRITE_THROUGH_CACHEABLE |
+      EFI_RESOURCE_ATTRIBUTE_WRITE_BACK_CACHEABLE |
+      EFI_RESOURCE_ATTRIBUTE_TESTED
+  );
+
+  BuildResourceDescriptorHob (
+    EFI_RESOURCE_SYSTEM_MEMORY,
+    ResourceAttributes,
+    FixedPcdGet64 (PcdSystemMemoryBase),
+    MemLowSize
+    );
 
-  // Configuration space 0xF000_0000 - 0xFFFF_FFFF
-  VirtualMemoryTable[++Index].PhysicalBase  = 0xF0000000;
-  VirtualMemoryTable[Index].VirtualBase     = 0xF0000000;
-  VirtualMemoryTable[Index].Length          = 0x10000000;
-  VirtualMemoryTable[Index].Attributes      = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
+  // DDR
+  mVirtualMemoryTable[Index].PhysicalBase    = FixedPcdGet64 (PcdSystemMemoryBase);
+  mVirtualMemoryTable[Index].VirtualBase     = FixedPcdGet64 (PcdSystemMemoryBase);
+  mVirtualMemoryTable[Index].Length          = MemLowSize;
+  mVirtualMemoryTable[Index].Attributes      = DDR_ATTRIBUTES_CACHED;
+
+  // Configuration space
+  mVirtualMemoryTable[++Index].PhysicalBase  = ConfigSpaceBaseAddr;
+  mVirtualMemoryTable[Index].VirtualBase     = ConfigSpaceBaseAddr;
+  mVirtualMemoryTable[Index].Length          = SIZE_4GB - ConfigSpaceBaseAddr;
+  mVirtualMemoryTable[Index].Attributes      = ARM_MEMORY_REGION_ATTRIBUTE_DEVICE;
+
+  if (MemSize > MemLowSize) {
+    //
+    // If we have more than MemLowSize worth of DRAM, the remainder will be
+    // mapped at the top of the remapped window.
+    //
+    mVirtualMemoryTable[++Index].PhysicalBase  = MemHighStart;
+    mVirtualMemoryTable[Index].VirtualBase     = MemHighStart;
+    mVirtualMemoryTable[Index].Length          = MemHighSize;
+    mVirtualMemoryTable[Index].Attributes      = DDR_ATTRIBUTES_CACHED;
+
+    BuildResourceDescriptorHob (
+      EFI_RESOURCE_SYSTEM_MEMORY,
+      ResourceAttributes,
+      MemHighStart,
+      MemHighSize
+      );
+  }
 
   // End of Table
-  VirtualMemoryTable[++Index].PhysicalBase  = 0;
-  VirtualMemoryTable[Index].VirtualBase     = 0;
-  VirtualMemoryTable[Index].Length          = 0;
-  VirtualMemoryTable[Index].Attributes      = 0;
+  mVirtualMemoryTable[++Index].PhysicalBase  = 0;
+  mVirtualMemoryTable[Index].VirtualBase     = 0;
+  mVirtualMemoryTable[Index].Length          = 0;
+  mVirtualMemoryTable[Index].Attributes      = 0;
 
   ASSERT((Index + 1) <= MAX_VIRTUAL_MEMORY_MAP_DESCRIPTORS);
 
-  *VirtualMemoryMap = VirtualMemoryTable;
+  *VirtualMemoryMap = mVirtualMemoryTable;
 }
diff --git a/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h
new file mode 100644
index 0000000..8101cf3
--- /dev/null
+++ b/Platform/Marvell/Armada/Library/Armada70x0Lib/Armada70x0LibMem.h
@@ -0,0 +1,48 @@
+/*******************************************************************************
+Copyright (C) 2017 Marvell International Ltd.
+
+Marvell BSD License Option
+
+If you received this File from Marvell, you may opt to use, redistribute and/or
+modify this File under the following licensing terms.
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+* Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+* Neither the name of Marvell nor the names of its contributors may be
+ used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+
+#define CCU_MC_RCR_REG                  0xf0001700
+#define REMAP_EN_MASK                   0x1
+#define REMAP_SIZE_OFFS                 20
+#define REMAP_SIZE_MASK                 (0xfff << REMAP_SIZE_OFFS)
+#define CCU_MC_RTBR_REG                 0xf0001708
+#define TARGET_BASE_OFFS                10
+#define TARGET_BASE_MASK                (0xfffff << TARGET_BASE_OFFS)
+
+#define DRAM_REMAP_ENABLED \
+          (MmioRead32 (CCU_MC_RCR_REG) & REMAP_EN_MASK)
+#define DRAM_REMAP_SIZE \
+          (MmioRead32 (CCU_MC_RCR_REG) & REMAP_SIZE_MASK) + SIZE_1MB
+#define DRAM_REMAP_TARGET \
+          (MmioRead32 (CCU_MC_RTBR_REG) << TARGET_BASE_OFFS)
diff --git a/Platform/Marvell/Marvell.dec b/Platform/Marvell/Marvell.dec
index 434d6cb..36a9d59 100644
--- a/Platform/Marvell/Marvell.dec
+++ b/Platform/Marvell/Marvell.dec
@@ -194,6 +194,9 @@
 #TRNG
   gMarvellTokenSpaceGuid.PcdEip76TrngBaseAddress|0x0|UINT64|0x50000053
 
+#Configuration space
+  gMarvellTokenSpaceGuid.PcdConfigSpaceBaseAddress|0xF0000000|UINT64|0x50000054
+
 [Protocols]
   gMarvellEepromProtocolGuid               = { 0x71954bda, 0x60d3, 0x4ef8, { 0x8e, 0x3c, 0x0e, 0x33, 0x9f, 0x3b, 0xc2, 0x2b }}
   gMarvellMdioProtocolGuid                 = { 0x40010b03, 0x5f08, 0x496a, { 0xa2, 0x64, 0x10, 0x5e, 0x72, 0xd3, 0x71, 0xaa }}
-- 
2.7.4



  parent reply	other threads:[~2017-10-25 15:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-25 15:18 [platforms: PATCH v3 0/8] Armada 7k/8k - memory improvements Marcin Wojtas
2017-10-25 15:18 ` [platforms: PATCH v3 1/8] Marvell/Armada: Implement EFI_RNG_PROTOCOL driver for EIP76 TRNG Marcin Wojtas
2017-10-25 15:18 ` Marcin Wojtas [this message]
2017-10-25 15:18 ` [platforms: PATCH v3 6/8] Marvell/Armada: Enable dynamic DRAM size detection Marcin Wojtas
2017-10-25 15:55 ` [platforms: PATCH v3 0/8] Armada 7k/8k - memory improvements Leif Lindholm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1508944693-16315-3-git-send-email-mw@semihalf.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox