From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, neta@marvell.com, kostap@marvell.com,
jinghua@marvell.com, mw@semihalf.com, jsd@semihalf.com
Subject: [platforms: PATCH 2/4] Marvell/Drivers: MvSpiDxe: Enable using driver in RT
Date: Sun, 5 Nov 2017 11:55:37 +0100 [thread overview]
Message-ID: <1509879339-10516-3-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1509879339-10516-1-git-send-email-mw@semihalf.com>
This patch applies necessary modifications, which allow to use
MvSpiDxe driver in variable support as a runtime service.
Its type is modified to DXE_RUNTIME_DRIVER, as well as
a new callback is introduced as a part of the SpiMasterProtocol.
It is supposed to configure the memory space for mmio access to
the host controller registers. Moreover gBS locking usage in
MvSpiTransfer is limited to the firmware, as the runtime access
to the flash is protected within the OS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Platform/Marvell/Drivers/Spi/MvSpiDxe.c | 50 ++++++++++++++++++--
Platform/Marvell/Drivers/Spi/MvSpiDxe.h | 2 +
Platform/Marvell/Drivers/Spi/MvSpiDxe.inf | 4 +-
Platform/Marvell/Include/Protocol/Spi.h | 7 +++
4 files changed, 58 insertions(+), 5 deletions(-)
diff --git a/Platform/Marvell/Drivers/Spi/MvSpiDxe.c b/Platform/Marvell/Drivers/Spi/MvSpiDxe.c
index c60a520..bab6cf4 100755
--- a/Platform/Marvell/Drivers/Spi/MvSpiDxe.c
+++ b/Platform/Marvell/Drivers/Spi/MvSpiDxe.c
@@ -211,7 +211,9 @@ MvSpiTransfer (
Length = 8 * DataByteCount;
- EfiAcquireLock (&SpiMaster->Lock);
+ if (!EfiAtRuntime ()) {
+ EfiAcquireLock (&SpiMaster->Lock);
+ }
if (Flag & SPI_TRANSFER_BEGIN) {
SpiActivateCs (Slave);
@@ -254,7 +256,9 @@ MvSpiTransfer (
SpiDeactivateCs (Slave);
}
- EfiReleaseLock (&SpiMaster->Lock);
+ if (!EfiAtRuntime ()) {
+ EfiReleaseLock (&SpiMaster->Lock);
+ }
return EFI_SUCCESS;
}
@@ -338,6 +342,44 @@ MvSpiFreeSlave (
return EFI_SUCCESS;
}
+EFI_STATUS
+EFIAPI
+MvSpiConfigRuntime (
+ IN SPI_DEVICE *Slave
+ )
+{
+ EFI_STATUS Status;
+ UINTN AlignedAddress;
+
+ //
+ // Host register base may be not aligned to the page size,
+ // which is not accepted when setting memory space attributes.
+ // Add one aligned page of memory space which covers the host
+ // controller registers.
+ //
+ AlignedAddress = Slave->HostRegisterBaseAddress & ~(SIZE_4KB - 1);
+
+ Status = gDS->AddMemorySpace (EfiGcdMemoryTypeMemoryMappedIo,
+ AlignedAddress,
+ SIZE_4KB,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Failed to add memory space\n", __FUNCTION__));
+ return Status;
+ }
+
+ Status = gDS->SetMemorySpaceAttributes (AlignedAddress,
+ SIZE_4KB,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Failed to set memory attributes\n", __FUNCTION__));
+ gDS->RemoveMemorySpace (AlignedAddress, SIZE_4KB);
+ return Status;
+ }
+
+ return EFI_SUCCESS;
+}
+
STATIC
EFI_STATUS
SpiMasterInitProtocol (
@@ -350,6 +392,7 @@ SpiMasterInitProtocol (
SpiMasterProtocol->FreeDevice = MvSpiFreeSlave;
SpiMasterProtocol->Transfer = MvSpiTransfer;
SpiMasterProtocol->ReadWrite = MvSpiReadWrite;
+ SpiMasterProtocol->ConfigRuntime = MvSpiConfigRuntime;
return EFI_SUCCESS;
}
@@ -363,8 +406,7 @@ SpiMasterEntryPoint (
{
EFI_STATUS Status;
- mSpiMasterInstance = AllocateZeroPool (sizeof (SPI_MASTER));
-
+ mSpiMasterInstance = AllocateRuntimeZeroPool (sizeof (SPI_MASTER));
if (mSpiMasterInstance == NULL) {
return EFI_OUT_OF_RESOURCES;
}
diff --git a/Platform/Marvell/Drivers/Spi/MvSpiDxe.h b/Platform/Marvell/Drivers/Spi/MvSpiDxe.h
index e7e280a..50cdc02 100644
--- a/Platform/Marvell/Drivers/Spi/MvSpiDxe.h
+++ b/Platform/Marvell/Drivers/Spi/MvSpiDxe.h
@@ -38,10 +38,12 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include <Library/PcdLib.h>
#include <Library/UefiLib.h>
#include <Library/DebugLib.h>
+#include <Library/DxeServicesTableLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Uefi/UefiBaseType.h>
#include <Library/BaseMemoryLib.h>
#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeLib.h>
#include <Protocol/Spi.h>
diff --git a/Platform/Marvell/Drivers/Spi/MvSpiDxe.inf b/Platform/Marvell/Drivers/Spi/MvSpiDxe.inf
index 08c6c04..9fe246f 100644
--- a/Platform/Marvell/Drivers/Spi/MvSpiDxe.inf
+++ b/Platform/Marvell/Drivers/Spi/MvSpiDxe.inf
@@ -33,7 +33,7 @@
INF_VERSION = 0x00010005
BASE_NAME = SpiMasterDxe
FILE_GUID = c19dbc8a-f4f9-43b0-aee5-802e3ed03d15
- MODULE_TYPE = DXE_DRIVER
+ MODULE_TYPE = DXE_RUNTIME_DRIVER
VERSION_STRING = 1.0
ENTRY_POINT = SpiMasterEntryPoint
@@ -53,8 +53,10 @@
TimerLib
UefiLib
DebugLib
+ DxeServicesTableLib
MemoryAllocationLib
IoLib
+ UefiRuntimeLib
[FixedPcd]
gMarvellTokenSpaceGuid.PcdSpiRegBase
diff --git a/Platform/Marvell/Include/Protocol/Spi.h b/Platform/Marvell/Include/Protocol/Spi.h
index d993021..abbad19 100644
--- a/Platform/Marvell/Include/Protocol/Spi.h
+++ b/Platform/Marvell/Include/Protocol/Spi.h
@@ -101,12 +101,19 @@ EFI_STATUS
IN SPI_DEVICE *SpiDev
);
+typedef
+EFI_STATUS
+(EFIAPI *MV_SPI_CONFIG_RT) (
+ IN SPI_DEVICE *SpiDev
+ );
+
struct _MARVELL_SPI_MASTER_PROTOCOL {
MV_SPI_INIT Init;
MV_SPI_READ_WRITE ReadWrite;
MV_SPI_TRANSFER Transfer;
MV_SPI_SETUP_DEVICE SetupDevice;
MV_SPI_FREE_DEVICE FreeDevice;
+ MV_SPI_CONFIG_RT ConfigRuntime;
};
#endif // __MARVELL_SPI_MASTER_PROTOCOL_H__
--
2.7.4
next prev parent reply other threads:[~2017-11-05 10:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-05 10:55 [platforms: PATCH 0/4] Armada 7k/8k variable support Marcin Wojtas
2017-11-05 10:55 ` [platforms: PATCH 1/4] Marvell/Drivers: MvSpiFlash: Enable using driver in RT Marcin Wojtas
2017-11-09 13:38 ` Leif Lindholm
2017-11-05 10:55 ` Marcin Wojtas [this message]
2017-11-09 13:44 ` [platforms: PATCH 2/4] Marvell/Drivers: MvSpiDxe: " Leif Lindholm
2017-11-09 13:46 ` Marcin Wojtas
2017-11-05 10:55 ` [platforms: PATCH 3/4] Platform/Marvell: Introduce MvFvbDxe variable support driver Marcin Wojtas
2017-11-09 15:02 ` Leif Lindholm
2017-11-09 15:16 ` Marcin Wojtas
2017-11-09 15:40 ` Leif Lindholm
2017-11-09 15:48 ` Marcin Wojtas
2017-11-09 16:04 ` Leif Lindholm
2017-11-05 10:55 ` [platforms: PATCH 4/4] Marvell/Armada: Enable variables support Marcin Wojtas
2017-11-09 15:04 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1509879339-10516-3-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox