From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
To: <ard.biesheuvel@linaro.org>, <leif.lindholm@linaro.org>,
<michael.d.kinney@intel.com>, <edk2-devel@lists.01.org>
Subject: [PATCH 09/10] SocLib : Add support for initialization of peripherals
Date: Tue, 7 Nov 2017 20:12:15 +0530 [thread overview]
Message-ID: <1510065736-9394-10-git-send-email-meenakshi.aggarwal@nxp.com> (raw)
In-Reply-To: <1510065736-9394-1-git-send-email-meenakshi.aggarwal@nxp.com>
Add SocInit function that initializes peripherals
and print board and soc information.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
---
Platform/NXP/Include/Bitops.h | 179 +++++++++++++++
Silicon/NXP/Chassis/Chassis.c | 393 ++++++++++++++++++++++++++++++++
Silicon/NXP/Chassis/Chassis.h | 123 ++++++++++
Silicon/NXP/Chassis/Chassis2/SerDes.h | 82 +++++++
Silicon/NXP/Chassis/Chassis2/Soc.c | 146 ++++++++++++
Silicon/NXP/Chassis/Chassis2/Soc.h | 376 ++++++++++++++++++++++++++++++
Silicon/NXP/Chassis/LS1043aSocLib.inf | 48 ++++
Silicon/NXP/Chassis/SerDes.c | 253 ++++++++++++++++++++
Silicon/NXP/LS1043A/Include/SocSerDes.h | 55 +++++
9 files changed, 1655 insertions(+)
create mode 100644 Platform/NXP/Include/Bitops.h
create mode 100644 Silicon/NXP/Chassis/Chassis.c
create mode 100644 Silicon/NXP/Chassis/Chassis.h
create mode 100644 Silicon/NXP/Chassis/Chassis2/SerDes.h
create mode 100644 Silicon/NXP/Chassis/Chassis2/Soc.c
create mode 100644 Silicon/NXP/Chassis/Chassis2/Soc.h
create mode 100644 Silicon/NXP/Chassis/LS1043aSocLib.inf
create mode 100644 Silicon/NXP/Chassis/SerDes.c
create mode 100644 Silicon/NXP/LS1043A/Include/SocSerDes.h
diff --git a/Platform/NXP/Include/Bitops.h b/Platform/NXP/Include/Bitops.h
new file mode 100644
index 0000000..90e6404
--- /dev/null
+++ b/Platform/NXP/Include/Bitops.h
@@ -0,0 +1,179 @@
+/** Bitops.h
+ Header defining the general bitwise operations
+
+ Copyright 2017 NXP
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __BITOPS_H__
+#define __BITOPS_H__
+
+#include <Library/DebugLib.h>
+
+#define MASK_LOWER_16 0xFFFF0000
+#define MASK_UPPER_16 0x0000FFFF
+#define MASK_LOWER_8 0xFF000000
+#define MASK_UPPER_8 0x000000FF
+
+/*
+ * Returns the bit mask for a bit index from 0 to 31
+ */
+#define BIT(_BitIndex) (0x1u << (_BitIndex))
+
+/**
+ * Upper32Bits - return bits 32-63 of a number
+ * @N: the number we're accessing
+ *
+ * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress
+ * the "right shift count >= width of type" warning when that quantity is
+ * 32-bits.
+ */
+#define Upper32Bits(N) ((UINT32)(((N) >> 16) >> 16))
+
+/**
+ * Lower32Bits - return bits 0-31 of a number
+ * @N: the number we're accessing
+ */
+#define Lower32Bits(N) ((UINT32)(N))
+
+
+/*
+ * Stores a value for a given bit field in 32-bit '_Container'
+ */
+
+#define SET_BIT_FIELD32(_Container, _BitShift, _BitWidth, _Value) \
+ __SET_BIT_FIELD32(_Container, \
+ __GEN_BIT_FIELD_MASK32(_BitShift, _BitWidth), \
+ _BitShift, \
+ _Value)
+
+#define __SET_BIT_FIELD32(_Container, _BitMask, _BitShift, _Value) \
+ do { \
+ (_Container) &= ~(_BitMask); \
+ if ((_Value) != 0) { \
+ ASSERT(((UINT32)(_Value) << (_BitShift)) <= (_BitMask)); \
+ (_Container) |= \
+ ((UINT32)(_Value) << (_BitShift)) & (_BitMask); \
+ } \
+ } while (0)
+
+/*
+ * Extracts the value for a given bit field in 32-bit _Container
+ */
+
+#define GET_BIT_FIELD32(_Container, _BitShift, _BitWidth) \
+ __GET_BIT_FIELD32(_Container, \
+ __GEN_BIT_FIELD_MASK32(_BitShift, _BitWidth), \
+ _BitShift)
+
+#define __GET_BIT_FIELD32(_Container, _BitMask, _BitShift) \
+ (((UINT32)(_Container) & (_BitMask)) >> (_BitShift))
+
+#define __GEN_BIT_FIELD_MASK32(_BitShift, _BitWidth) \
+ ((_BitWidth) < 32 ? \
+ (((UINT32)1 << (_BitWidth)) - 1) << (_BitShift) : \
+ ~(UINT32)0)
+
+/*
+ *Stores a value for a given bit field in 64-bit '_Container'
+ */
+#define SET_BIT_FIELD64(_Container, _BitShift, _BitWidth, _Value) \
+ __SET_BIT_FIELD64(_Container, \
+ __GEN_BIT_FIELD_MASK64(_BitShift, _BitWidth), \
+ _BitShift, \
+ _Value)
+
+#define __SET_BIT_FIELD64(_Container, _BitMask, _BitShift, _Value) \
+ do { \
+ (_Container) &= ~(_BitMask); \
+ if ((_Value) != 0) { \
+ ASSERT(((UINT64)(_Value) << (_BitShift)) <= (_BitMask)); \
+ (_Container) |= \
+ ((UINT64)(_Value) << (_BitShift)) & (_BitMask); \
+ } \
+ } while (0)
+
+/*
+ * Extracts the value for a given bit field in 64-bit _Container
+ */
+#define GET_BIT_FIELD64(_Container, _BitShift, _BitWidth) \
+ __GET_BIT_FIELD64(_Container, \
+ __GEN_BIT_FIELD_MASK64(_BitShift, _BitWidth), \
+ _BitShift)
+
+#define __GET_BIT_FIELD64(_Container, _BitMask, _BitShift) \
+ (((UINT64)(_Container) & (_BitMask)) >> (_BitShift))
+
+#define __GEN_BIT_FIELD_MASK64(_BitShift, _BitWidth) \
+ ((_BitWidth) < 64 ? \
+ (((UINT64)1 << (_BitWidth)) - 1) << (_BitShift) : \
+ ~(UINT64)0)
+
+/**
+
+ Test If the Destination buffer sets (0->1) or clears (1->0) any bit in Source buffer ?
+
+ @param[in] Source Source Buffer Pointer
+ @param[in] Destination Destination Buffer Pointer
+ @param[in] NumBytes Bytes to Compare
+ @param[in] Set True : Test Weather Destination buffer sets any bit in Source buffer ?
+ False : Test Weather Destination buffer clears any bit in Source buffer ?
+
+ @retval TRUE Destination buffer sets/clear a bit in source buffer.
+ @retval FALSE Destination buffer doesn't sets/clear bit in source buffer.
+
+**/
+STATIC
+inline
+BOOLEAN
+TestBitSetClear (
+ IN VOID *Source,
+ IN VOID *Destination,
+ IN UINTN NumBytes,
+ IN BOOLEAN Set
+ )
+{
+ UINTN Index = 0;
+ VOID* Buffer;
+
+ if (Set) {
+ Buffer = Destination;
+ } else {
+ Buffer = Source;
+ }
+
+ while(Index < NumBytes) {
+ if ((NumBytes - Index) >= 8) {
+ if ((*((UINT64*)(Source+Index)) ^ *((UINT64*)(Destination+Index))) & *((UINT64*)(Buffer+Index))) {
+ return TRUE;
+ }
+ Index += 8;
+ } else if ((NumBytes - Index) >= 4) {
+ if ((*((UINT32*)(Source+Index)) ^ *((UINT32*)(Destination+Index))) & *((UINT32*)(Buffer+Index))) {
+ return TRUE;
+ }
+ Index += 4;
+ } else if ((NumBytes - Index) >= 2) {
+ if ((*((UINT16*)(Source+Index)) ^ *((UINT16*)(Destination+Index))) & *((UINT16*)(Buffer+Index))) {
+ return TRUE;
+ }
+ Index += 2;
+ } else if ((NumBytes - Index) >= 1) {
+ if ((*((UINT8*)(Source+Index)) ^ *((UINT8*)(Destination+Index))) & *((UINT8*)(Buffer+Index))) {
+ return TRUE;
+ }
+ Index += 1;
+ }
+ }
+ return FALSE;
+}
+
+#endif
diff --git a/Silicon/NXP/Chassis/Chassis.c b/Silicon/NXP/Chassis/Chassis.c
new file mode 100644
index 0000000..35814ca
--- /dev/null
+++ b/Silicon/NXP/Chassis/Chassis.c
@@ -0,0 +1,393 @@
+/** @file
+ SoC specific Library containg functions to initialize various SoC components
+
+ Copyright (c) 2017 NXP
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+#include <Library/BaseLib.h>
+#include <Library/BeIoLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PrintLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/Utils.h>
+
+#include <Soc.h>
+
+#include "Chassis.h"
+
+UINT32
+EFIAPI
+GurRead (
+ IN UINTN Address
+ )
+{
+ if (FixedPcdGetBool(PcdGurBigEndian)) {
+ return BeMmioRead32(Address);
+ } else {
+ return MmioRead32(Address);
+ }
+}
+
+/*
+ * Structure to list available SOCs.
+ */
+STATIC CPU_TYPE CpuTypeList[] = {
+ CPU_TYPE_ENTRY(LS1043A, LS1043A, 4),
+};
+
+UINT32
+InitiatorType (
+ IN UINT32 Cluster,
+ IN UINTN InitId
+ )
+{
+ CCSR_GUR *GurBase;
+ UINT32 Idx;
+ UINT32 Type;
+
+ GurBase = (VOID *)PcdGet64(PcdGutsBaseAddr);
+ Idx = (Cluster >> (InitId * 8)) & TP_CLUSTER_INIT_MASK;
+ Type = GurRead((UINTN)&GurBase->TpItyp[Idx]);
+
+ if (Type & TP_ITYP_AV_MASK) {
+ return Type;
+ }
+
+ return 0;
+}
+
+/*
+ * Return the mask for number of cores on this SOC.
+ */
+UINT32
+CpuMask (
+ VOID
+ )
+{
+ CCSR_GUR *GurBase;
+ UINTN ClusterIndex;
+ UINTN Count;
+ UINT32 Cluster;
+ UINT32 Type;
+ UINT32 Mask;
+ UINTN InitiatorIndex;
+
+ GurBase = (VOID *)PcdGet64(PcdGutsBaseAddr);
+ ClusterIndex = 0;
+ Count = 0;
+ Mask = 0;
+
+ do {
+ Cluster = GurRead((UINTN)&GurBase->TpCluster[ClusterIndex].Lower);
+ for (InitiatorIndex = 0; InitiatorIndex < TP_INIT_PER_CLUSTER; InitiatorIndex++) {
+ Type = InitiatorType(Cluster, InitiatorIndex);
+ if (Type) {
+ if (TP_ITYP_TYPE_MASK(Type) == TP_ITYP_TYPE_ARM)
+ Mask |= 1 << Count;
+ Count++;
+ }
+ }
+ ClusterIndex++;
+ } while (CHECK_CLUSTER(Cluster));
+
+ return Mask;
+}
+
+/*
+ * Return the number of cores on this SOC.
+ */
+UINTN
+CpuNumCores (
+ VOID
+ )
+{
+ return HammingWeight32(CpuMask());
+}
+
+UINT32
+QoriqCoreToType (
+ IN UINTN Core
+ )
+{
+ CCSR_GUR *GurBase;
+ UINTN ClusterIndex;
+ UINTN Count;
+ UINT32 Cluster;
+ UINT32 Type;
+ UINTN InitiatorIndex;
+
+ GurBase = (VOID *)PcdGet64(PcdGutsBaseAddr);
+ ClusterIndex = 0;
+ Count = 0;
+
+ do {
+ Cluster = GurRead((UINTN)&GurBase->TpCluster[ClusterIndex].Lower);
+ for (InitiatorIndex = 0; InitiatorIndex < TP_INIT_PER_CLUSTER; InitiatorIndex++) {
+ Type = InitiatorType(Cluster, InitiatorIndex);
+ if (Type) {
+ if (Count == Core)
+ return Type;
+ Count++;
+ }
+ }
+ ClusterIndex++;
+ } while (CHECK_CLUSTER(Cluster));
+
+ return -1; /* cannot identify the cluster */
+}
+
+/*
+ * Print CPU information
+ */
+VOID
+PrintCpuInfo (
+ VOID
+ )
+{
+ SYS_INFO SysInfo;
+ UINTN CoreIndex;
+ UINTN Core;
+ UINT32 Type;
+ CHAR8 Buf[32];
+ CHAR8 Buffer[100];
+ UINTN CharCount;
+
+ GetSysInfo(&SysInfo);
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), "Clock Configuration:");
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+
+ ForEachCpu(CoreIndex, Core, CpuNumCores(), CpuMask()) {
+ if (!(CoreIndex % 3)) {
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), "\n ");
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+ }
+
+ Type = TP_ITYP_VERSION(QoriqCoreToType(Core));
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), "CPU%d(%a):%-4a MHz ", Core,
+ Type == TY_ITYP_VERSION_A7 ? "A7 " :
+ (Type == TY_ITYP_VERSION_A53 ? "A53" :
+ (Type == TY_ITYP_VERSION_A57 ? "A57" :
+ (Type == TY_ITYP_VERSION_A72 ? "A72" : " Unknown Core "))),
+ StringToMHz(Buf, sizeof(Buf), SysInfo.FreqProcessor[Core]));
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+ }
+
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), "\n Bus: %-4a MHz ",
+ StringToMHz(Buf, sizeof(Buf), SysInfo.FreqSystemBus));
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), "DDR: %-4a MHz",
+ StringToMHz(Buf, sizeof(Buf), SysInfo.FreqDdrBus));
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+
+ if (SysInfo.FreqFman[0] != 0) {
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), "\n FMAN: %-4a MHz ",
+ StringToMHz(Buf, sizeof(Buf), SysInfo.FreqFman[0]));
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+ }
+
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), "\n");
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+}
+
+/*
+ * Return system bus frequency
+ */
+UINT64
+GetBusFrequency (
+ VOID
+ )
+{
+ SYS_INFO SocSysInfo;
+
+ GetSysInfo(&SocSysInfo);
+
+ return SocSysInfo.FreqSystemBus;
+}
+
+/*
+ * Return SDXC bus frequency
+ */
+UINT64
+GetSdxcFrequency (
+ VOID
+ )
+{
+ SYS_INFO SocSysInfo;
+
+ GetSysInfo(&SocSysInfo);
+
+ return SocSysInfo.FreqSdhc;
+}
+
+/*
+ * Print Soc information
+ */
+VOID
+PrintSoc (
+ VOID
+ )
+{
+ CHAR8 Buf[16];
+ CCSR_GUR *GurBase;
+ UINTN Count;
+ UINTN Svr;
+ UINTN Ver;
+
+ GurBase = (VOID *)PcdGet64(PcdGutsBaseAddr);
+
+ Buf[0] = L'\0';
+ Svr = GurRead((UINTN)&GurBase->Svr);
+ Ver = SVR_SOC_VER(Svr);
+
+ for (Count = 0; Count < ARRAY_SIZE(CpuTypeList); Count++)
+ if ((CpuTypeList[Count].SocVer & SVR_WO_E) == Ver) {
+ AsciiStrCpy(Buf, (CONST CHAR8 *)CpuTypeList[Count].Name);
+
+ if (IS_E_PROCESSOR(Svr)) {
+ AsciiStrCat(Buf, (CONST CHAR8 *)"E");
+ }
+ break;
+ }
+
+ if (Count == ARRAY_SIZE(CpuTypeList)) {
+ AsciiStrCpy(Buf, (CONST CHAR8 *)"unknown");
+ }
+
+ DEBUG((DEBUG_INFO, "SoC: %a (0x%x); Rev %d.%d\n",
+ Buf, Svr, SVR_MAJOR(Svr), SVR_MINOR(Svr)));
+
+ return;
+}
+
+/*
+ * Dump RCW (Reset Control Word) on console
+ */
+VOID
+PrintRCW (
+ VOID
+ )
+{
+ CCSR_GUR *Base;
+ UINTN Count;
+ CHAR8 Buffer[100];
+ UINTN CharCount;
+
+ Base = (VOID *)PcdGet64(PcdGutsBaseAddr);
+
+ /*
+ * Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer),
+ "Reset Configuration Word (RCW):");
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+ for (Count = 0; Count < ARRAY_SIZE(Base->RcwSr); Count++) {
+ UINT32 Rcw = BeMmioRead32((UINTN)&Base->RcwSr[Count]);
+
+ if ((Count % 4) == 0) {
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer),
+ "\n %08x:", Count * 4);
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+ }
+
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), " %08x", Rcw);
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+ }
+
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), "\n");
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+}
+
+/*
+ * Setup SMMU in bypass mode
+ * and also set its pagesize
+ */
+VOID
+SmmuInit (
+ VOID
+ )
+{
+ UINT32 Value;
+
+ /* set pagesize as 64K and ssmu-500 in bypass mode */
+ Value = (MmioRead32((UINTN)SMMU_REG_SACR) | SACR_PAGESIZE_MASK);
+ MmioWrite32((UINTN)SMMU_REG_SACR, Value);
+
+ Value = (MmioRead32((UINTN)SMMU_REG_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ MmioWrite32((UINTN)SMMU_REG_SCR0, Value);
+
+ Value = (MmioRead32((UINTN)SMMU_REG_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
+ MmioWrite32((UINTN)SMMU_REG_NSCR0, Value);
+}
+
+/*
+ * Return current Soc Name form CpuTypeList
+ */
+CHAR8 *
+GetSocName (
+ VOID
+ )
+{
+ UINT8 Count;
+ UINTN Svr;
+ UINTN Ver;
+ CCSR_GUR *GurBase;
+
+ GurBase = (VOID *)PcdGet64(PcdGutsBaseAddr);
+
+ Svr = GurRead((UINTN)&GurBase->Svr);
+ Ver = SVR_SOC_VER(Svr);
+
+ for (Count = 0; Count < ARRAY_SIZE(CpuTypeList); Count++) {
+ if ((CpuTypeList[Count].SocVer & SVR_WO_E) == Ver) {
+ return (CHAR8 *)CpuTypeList[Count].Name;
+ }
+ }
+
+ return NULL;
+}
+
+/*
+ * Return Baud divisor on basis of Baudrate
+ */
+UINT32
+CalculateBaudDivisor (
+ IN UINT64 BaudRate
+ )
+{
+ SYS_INFO SocSysInfo;
+ UINTN DUartClk;
+
+ GetSysInfo(&SocSysInfo);
+ DUartClk = SocSysInfo.FreqSystemBus/PcdGet32(PcdPlatformFreqDiv);
+
+ return ((DUartClk)/(BaudRate * 16));
+}
+
+/*
+ * Return I2c bus frequency
+ */
+UINT32
+CalculateI2cClockRate (
+ VOID
+ )
+{
+ SYS_INFO SocSysInfo;
+
+ GetSysInfo(&SocSysInfo);
+
+ return SocSysInfo.FreqSystemBus;
+}
diff --git a/Silicon/NXP/Chassis/Chassis.h b/Silicon/NXP/Chassis/Chassis.h
new file mode 100644
index 0000000..8c97a3a
--- /dev/null
+++ b/Silicon/NXP/Chassis/Chassis.h
@@ -0,0 +1,123 @@
+/** @file
+* Header defining the Base addresses, sizes, flags etc for chassis 1
+*
+* Copyright 2017 NXP
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __CHASSIS_H__
+#define __CHASSIS_H__
+
+#define TP_ITYP_AV_MASK 0x00000001 /* Initiator available */
+#define TP_ITYP_TYPE_MASK(x) (((x) & 0x6) >> 1) /* Initiator Type */
+#define TP_ITYP_TYPE_ARM 0x0
+#define TP_ITYP_TYPE_PPC 0x1
+#define TP_ITYP_TYPE_OTHER 0x2 /* StarCore DSP */
+#define TP_ITYP_TYPE_HA 0x3 /* HW Accelerator */
+#define TP_ITYP_THDS(x) (((x) & 0x18) >> 3) /* # threads */
+#define TP_ITYP_VERSION(x) (((x) & 0xe0) >> 5) /* Initiator Version */
+#define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */
+#define TP_INIT_PER_CLUSTER 4
+
+#define TY_ITYP_VERSION_A7 0x1
+#define TY_ITYP_VERSION_A53 0x2
+#define TY_ITYP_VERSION_A57 0x3
+#define TY_ITYP_VERSION_A72 0x4
+
+#define CPU_TYPE_ENTRY(N, V, NC) \
+ { .Name = #N, .SocVer = SVR_##V, .NumCores = (NC)}
+
+#define SVR_WO_E 0xFFFFFE
+#define SVR_LS1043A 0x879200
+
+#define SVR_MAJOR(svr) (((svr) >> 4) & 0xf)
+#define SVR_MINOR(svr) (((svr) >> 0) & 0xf)
+#define SVR_SOC_VER(svr) (((svr) >> 8) & SVR_WO_E)
+#define IS_E_PROCESSOR(svr) (!((svr >> 8) & 0x1))
+
+typedef struct {
+ CHAR8 Name[16];
+ UINT32 SocVer;
+ UINT32 NumCores;
+} CPU_TYPE;
+
+typedef struct {
+ UINTN CpuClk; /* CPU clock in Hz! */
+ UINTN BusClk;
+ UINTN MemClk;
+ UINTN PciClk;
+ UINTN SdhcClk;
+} SOC_CLOCK_INFO;
+
+/*
+ * Print Soc information
+ */
+VOID
+PrintSoc (
+ VOID
+ );
+
+/*
+ * Initialize Clock structure
+ */
+VOID
+ClockInit (
+ VOID
+ );
+
+/*
+ * Setup SMMU in bypass mode
+ * and also set its pagesize
+ */
+VOID
+SmmuInit (
+ VOID
+ );
+
+/*
+ * Print CPU information
+ */
+VOID
+PrintCpuInfo (
+ VOID
+ );
+
+/*
+ * Dump RCW (Reset Control Word) on console
+ */
+VOID
+PrintRCW (
+ VOID
+ );
+
+UINT32
+InitiatorType (
+ IN UINT32 Cluster,
+ IN UINTN InitId
+ );
+
+/*
+ * Return the mask for number of cores on this SOC.
+ */
+UINT32
+CpuMask (
+ VOID
+ );
+
+/*
+ * Return the number of cores on this SOC.
+ */
+UINTN
+CpuNumCores (
+ VOID
+ );
+
+#endif /* __CHASSIS_H__ */
diff --git a/Silicon/NXP/Chassis/Chassis2/SerDes.h b/Silicon/NXP/Chassis/Chassis2/SerDes.h
new file mode 100644
index 0000000..844cad0
--- /dev/null
+++ b/Silicon/NXP/Chassis/Chassis2/SerDes.h
@@ -0,0 +1,82 @@
+/** SerDes.h
+ The Header file of SerDes Module for Chassis 2
+
+ Copyright 2017 NXP
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __SERDES_H__
+#define __SERDES_H__
+
+#include <Uefi/UefiBaseType.h>
+
+#define SRDS_MAX_LANES 4
+
+typedef enum {
+ NONE = 0,
+ PCIE1,
+ PCIE2,
+ PCIE3,
+ SATA,
+ SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC10,
+ QSGMII_FM1_A,
+ XFI_FM1_MAC9,
+ XFI_FM1_MAC10,
+ SGMII_2500_FM1_DTSEC2,
+ SGMII_2500_FM1_DTSEC5,
+ SGMII_2500_FM1_DTSEC9,
+ SGMII_2500_FM1_DTSEC10,
+ SERDES_PRTCL_COUNT
+} SERDES_PROTOCOL;
+
+typedef enum {
+ SRDS_1 = 0,
+ SRDS_2,
+ SRDS_MAX_NUM
+} SERDES_NUMBER;
+
+typedef struct {
+ UINT16 Protocol;
+ UINT8 SrdsLane[SRDS_MAX_LANES];
+} SERDES_CONFIG;
+
+typedef
+VOID
+SERDES_PROBE_LANES_CALLBACK (
+ IN SERDES_PROTOCOL LaneProtocol,
+ IN VOID *Arg
+ );
+
+VOID
+SerDesProbeLanes(
+ IN SERDES_PROBE_LANES_CALLBACK *SerDesLaneProbeCallback,
+ IN VOID *Arg
+ );
+
+EFI_STATUS
+CheckSerDesPrtclValid (
+ IN INTN SerDes,
+ IN UINT32 Prtcl
+ );
+
+SERDES_PROTOCOL
+GetSerDesPrtcl (
+ IN INTN SerDes,
+ IN INTN Cfg,
+ IN INTN Lane
+ );
+
+#endif /* __SERDES_H */
diff --git a/Silicon/NXP/Chassis/Chassis2/Soc.c b/Silicon/NXP/Chassis/Chassis2/Soc.c
new file mode 100644
index 0000000..e18c390
--- /dev/null
+++ b/Silicon/NXP/Chassis/Chassis2/Soc.c
@@ -0,0 +1,146 @@
+/** @Soc.c
+ SoC specific Library containg functions to initialize various SoC components
+
+ Copyright 2017 NXP
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+#include <Chassis.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib/MemLibInternals.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PrintLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/Utils.h>
+
+#include "Soc.h"
+
+VOID
+GetSysInfo (
+ OUT SYS_INFO *PtrSysInfo
+ )
+{
+ CCSR_GUR *GurBase;
+ CCSR_CLOCK *ClkBase;
+ UINTN CpuIndex;
+ UINT32 TempRcw;
+ UINT32 CPllSel;
+ UINT32 CplxPll;
+ CONST UINT8 CoreCplxPll[8] = {
+ [0] = 0, /* CC1 PPL / 1 */
+ [1] = 0, /* CC1 PPL / 2 */
+ [4] = 1, /* CC2 PPL / 1 */
+ [5] = 1, /* CC2 PPL / 2 */
+ };
+
+ CONST UINT8 CoreCplxPllDivisor[8] = {
+ [0] = 1, /* CC1 PPL / 1 */
+ [1] = 2, /* CC1 PPL / 2 */
+ [4] = 1, /* CC2 PPL / 1 */
+ [5] = 2, /* CC2 PPL / 2 */
+ };
+
+ UINTN PllCount;
+ UINTN FreqCPll[NUM_CC_PLLS];
+ UINTN PllRatio[NUM_CC_PLLS];
+ UINTN SysClk;
+
+ GurBase = (VOID *)PcdGet64(PcdGutsBaseAddr);
+ ClkBase = (VOID *)PcdGet64(PcdClkBaseAddr);
+ SysClk = CLK_FREQ;
+
+ InternalMemZeroMem(PtrSysInfo, sizeof (SYS_INFO));
+
+ PtrSysInfo->FreqSystemBus = SysClk;
+ PtrSysInfo->FreqDdrBus = SysClk;
+
+ PtrSysInfo->FreqSystemBus *= (GurRead((UINTN)&GurBase->RcwSr[0]) >>
+ CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT) &
+ CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK;
+ PtrSysInfo->FreqDdrBus *= (GurRead((UINTN)&GurBase->RcwSr[0]) >>
+ CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT) &
+ CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK;
+
+ for (PllCount = 0; PllCount < NUM_CC_PLLS; PllCount++) {
+ PllRatio[PllCount] = (GurRead((UINTN)&ClkBase->PllCgSr[PllCount].PllCnGSr) >> 1) & 0xff;
+ if (PllRatio[PllCount] > 4) {
+ FreqCPll[PllCount] = SysClk * PllRatio[PllCount];
+ } else {
+ FreqCPll[PllCount] = PtrSysInfo->FreqSystemBus * PllRatio[PllCount];
+ }
+ }
+
+ for (CpuIndex = 0; CpuIndex < MAX_CPUS; CpuIndex++) {
+ CPllSel = (GurRead((UINTN)&ClkBase->ClkcSr[CpuIndex].ClkCnCSr) >> 27) & 0xf;
+ CplxPll = CoreCplxPll[CPllSel];
+
+ PtrSysInfo->FreqProcessor[CpuIndex] = FreqCPll[CplxPll] / CoreCplxPllDivisor[CPllSel];
+ }
+
+ TempRcw = GurRead((UINTN)&GurBase->RcwSr[7]);
+ switch ((TempRcw & HWA_CGA_M1_CLK_SEL) >> HWA_CGA_M1_CLK_SHIFT) {
+ case 2:
+ PtrSysInfo->FreqFman[0] = FreqCPll[0] / 2;
+ break;
+ case 3:
+ PtrSysInfo->FreqFman[0] = FreqCPll[0] / 3;
+ break;
+ case 4:
+ PtrSysInfo->FreqFman[0] = FreqCPll[0] / 4;
+ break;
+ case 5:
+ PtrSysInfo->FreqFman[0] = PtrSysInfo->FreqSystemBus;
+ break;
+ case 6:
+ PtrSysInfo->FreqFman[0] = FreqCPll[1] / 2;
+ break;
+ case 7:
+ PtrSysInfo->FreqFman[0] = FreqCPll[1] / 3;
+ break;
+ default:
+ DEBUG((DEBUG_WARN, "Error: Unknown FMan1 clock select!\n"));
+ break;
+ }
+ PtrSysInfo->FreqSdhc = PtrSysInfo->FreqSystemBus/PcdGet32(PcdPlatformFreqDiv);
+ PtrSysInfo->FreqQman = PtrSysInfo->FreqSystemBus/PcdGet32(PcdPlatformFreqDiv);
+}
+
+/**
+ Function to initialize SoC specific constructs
+ // CPU Info
+ // SoC Personality
+ // Board Personality
+ // RCW prints
+ **/
+VOID
+SocInit (
+ VOID
+ )
+{
+ CHAR8 Buffer[100];
+ UINTN CharCount;
+
+ SmmuInit();
+
+ // Initialize the Serial Port
+ SerialPortInitialize ();
+ CharCount = AsciiSPrint (Buffer, sizeof (Buffer), "\nUEFI firmware (version %s built at %a on %a)\n\r",
+ (CHAR16*)PcdGetPtr(PcdFirmwareVersionString), __TIME__, __DATE__);
+ SerialPortWrite ((UINT8 *) Buffer, CharCount);
+
+ PrintCpuInfo();
+ PrintRCW();
+
+ return;
+}
diff --git a/Silicon/NXP/Chassis/Chassis2/Soc.h b/Silicon/NXP/Chassis/Chassis2/Soc.h
new file mode 100644
index 0000000..e6b89d3
--- /dev/null
+++ b/Silicon/NXP/Chassis/Chassis2/Soc.h
@@ -0,0 +1,376 @@
+/** Soc.h
+* Header defining the Base addresses, sizes, flags etc for chassis 1
+*
+* Copyright 2017 NXP
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __SOC_H__
+#define __SOC_H__
+
+#define HWA_CGA_M1_CLK_SEL 0xe0000000
+#define HWA_CGA_M1_CLK_SHIFT 29
+
+#define TP_CLUSTER_EOC_MASK 0xc0000000 /* end of clusters mask */
+#define NUM_CC_PLLS 2
+#define CLK_FREQ 100000000
+#define MAX_CPUS 4
+#define NUM_FMAN 1
+#define CHECK_CLUSTER(Cluster) ((Cluster & TP_CLUSTER_EOC_MASK) == 0x0)
+
+/* RCW SERDES MACRO */
+#define RCWSR_INDEX 4
+#define RCWSR_SRDS1_PRTCL_MASK 0xffff0000
+#define RCWSR_SRDS1_PRTCL_SHIFT 16
+#define RCWSR_SRDS2_PRTCL_MASK 0x0000ffff
+#define RCWSR_SRDS2_PRTCL_SHIFT 0
+
+/* SMMU Defintions */
+#define SMMU_BASE_ADDR 0x09000000
+#define SMMU_REG_SCR0 (SMMU_BASE_ADDR + 0x0)
+#define SMMU_REG_SACR (SMMU_BASE_ADDR + 0x10)
+#define SMMU_REG_IDR1 (SMMU_BASE_ADDR + 0x24)
+#define SMMU_REG_NSCR0 (SMMU_BASE_ADDR + 0x400)
+#define SMMU_REG_NSACR (SMMU_BASE_ADDR + 0x410)
+
+#define SCR0_USFCFG_MASK 0x00000400
+#define SCR0_CLIENTPD_MASK 0x00000001
+#define SACR_PAGESIZE_MASK 0x00010000
+#define IDR1_PAGESIZE_MASK 0x80000000
+
+typedef struct {
+ UINTN FreqProcessor[MAX_CPUS];
+ UINTN FreqSystemBus;
+ UINTN FreqDdrBus;
+ UINTN FreqLocalBus;
+ UINTN FreqSdhc;
+ UINTN FreqFman[NUM_FMAN];
+ UINTN FreqQman;
+} SYS_INFO;
+
+typedef enum {
+ ARM_CLK = 0,
+ BUS_CLK,
+ UART_CLK,
+ ESDHC_CLK,
+ I2C_CLK,
+ DSPI_CLK,
+} PERIPHERAL_CLOCK;
+
+/* Device Configuration and Pin Control */
+typedef struct {
+ UINT32 PorSr1; /* POR status 1 */
+#define CHASSIS2_CCSR_PORSR1_RCW_MASK 0xFF800000
+ UINT32 PorSr2; /* POR status 2 */
+ UINT8 Res008[0x20-0x8];
+ UINT32 GppOrCr1; /* General-purpose POR configuration */
+ UINT32 GppOrCr2;
+ UINT32 DcfgFuseSr; /* Fuse status register */
+ UINT8 Res02c[0x70-0x2c];
+ UINT32 DevDisr; /* Device disable control */
+ UINT32 DevDisr2; /* Device disable control 2 */
+ UINT32 DevDisr3; /* Device disable control 3 */
+ UINT32 DevDisr4; /* Device disable control 4 */
+ UINT32 DevDisr5; /* Device disable control 5 */
+ UINT32 DevDisr6; /* Device disable control 6 */
+ UINT32 DevDisr7; /* Device disable control 7 */
+ UINT8 Res08c[0x94-0x8c];
+ UINT32 CoreDisrU; /* uppper portion for support of 64 cores */
+ UINT32 CoreDisrL; /* lower portion for support of 64 cores */
+ UINT8 Res09c[0xa0-0x9c];
+ UINT32 Pvr; /* Processor version */
+ UINT32 Svr; /* System version */
+ UINT32 Mvr; /* Manufacturing version */
+ UINT8 Res0ac[0xb0-0xac];
+ UINT32 RstCr; /* Reset control */
+ UINT32 RstRqPblSr; /* Reset request preboot loader status */
+ UINT8 Res0b8[0xc0-0xb8];
+ UINT32 RstRqMr1; /* Reset request mask */
+ UINT8 Res0c4[0xc8-0xc4];
+ UINT32 RstRqSr1; /* Reset request status */
+ UINT8 Res0cc[0xd4-0xcc];
+ UINT32 RstRqWdTmrL; /* Reset request WDT mask */
+ UINT8 Res0d8[0xdc-0xd8];
+ UINT32 RstRqWdtSrL; /* Reset request WDT status */
+ UINT8 Res0e0[0xe4-0xe0];
+ UINT32 BrrL; /* Boot release */
+ UINT8 Res0e8[0x100-0xe8];
+ UINT32 RcwSr[16]; /* Reset control word status */
+#define CHASSIS2_RCWSR0_SYS_PLL_RAT_SHIFT 25
+#define CHASSIS2_RCWSR0_SYS_PLL_RAT_MASK 0x1f
+#define CHASSIS2_RCWSR0_MEM_PLL_RAT_SHIFT 16
+#define CHASSIS2_RCWSR0_MEM_PLL_RAT_MASK 0x3f
+ UINT8 Res140[0x200-0x140];
+ UINT32 ScratchRw[4]; /* Scratch Read/Write */
+ UINT8 Res210[0x300-0x210];
+ UINT32 ScratcHw1R[4]; /* Scratch Read (Write once) */
+ UINT8 Res310[0x400-0x310];
+ UINT32 CrstSr[12];
+ UINT8 Res430[0x500-0x430];
+ /* PCI Express n Logical I/O Device Number register */
+ UINT32 DcfgCcsrPex1LiodNr;
+ UINT32 DcfgCcsrPex2LiodNr;
+ UINT32 DcfgCcsrPex3LiodNr;
+ UINT32 DcfgCcsrPex4LiodNr;
+ /* RIO n Logical I/O Device Number register */
+ UINT32 DcfgCcsrRio1LiodNr;
+ UINT32 DcfgCcsrRio2LiodNr;
+ UINT32 DcfgCcsrRio3LiodNr;
+ UINT32 DcfgCcsrRio4LiodNr;
+ /* USB Logical I/O Device Number register */
+ UINT32 DcfgCcsrUsb1LiodNr;
+ UINT32 DcfgCcsrUsb2LiodNr;
+ UINT32 DcfgCcsrUsb3LiodNr;
+ UINT32 DcfgCcsrUsb4LiodNr;
+ /* SD/MMC Logical I/O Device Number register */
+ UINT32 DcfgCcsrSdMmc1LiodNr;
+ UINT32 DcfgCcsrSdMmc2LiodNr;
+ UINT32 DcfgCcsrSdMmc3LiodNr;
+ UINT32 DcfgCcsrSdMmc4LiodNr;
+ /* RIO Message Unit Logical I/O Device Number register */
+ UINT32 DcfgCcsrRiomaintLiodNr;
+ UINT8 Res544[0x550-0x544];
+ UINT32 SataLiodNr[4];
+ UINT8 Res560[0x570-0x560];
+ UINT32 DcfgCcsrMisc1LiodNr;
+ UINT32 DcfgCcsrMisc2LiodNr;
+ UINT32 DcfgCcsrMisc3LiodNr;
+ UINT32 DcfgCcsrMisc4LiodNr;
+ UINT32 DcfgCcsrDma1LiodNr;
+ UINT32 DcfgCcsrDma2LiodNr;
+ UINT32 DcfgCcsrDma3LiodNr;
+ UINT32 DcfgCcsrDma4LiodNr;
+ UINT32 DcfgCcsrSpare1LiodNr;
+ UINT32 DcfgCcsrSpare2LiodNr;
+ UINT32 DcfgCcsrSpare3LiodNr;
+ UINT32 DcfgCcsrSpare4LiodNr;
+ UINT8 Res5a0[0x600-0x5a0];
+ UINT32 DcfgCcsrPblSr;
+ UINT32 PamuBypENr;
+ UINT32 DmaCr1;
+ UINT8 Res60c[0x610-0x60c];
+ UINT32 DcfgCcsrGenSr1;
+ UINT32 DcfgCcsrGenSr2;
+ UINT32 DcfgCcsrGenSr3;
+ UINT32 DcfgCcsrGenSr4;
+ UINT32 DcfgCcsrGenCr1;
+ UINT32 DcfgCcsrGenCr2;
+ UINT32 DcfgCcsrGenCr3;
+ UINT32 DcfgCcsrGenCr4;
+ UINT32 DcfgCcsrGenCr5;
+ UINT32 DcfgCcsrGenCr6;
+ UINT32 DcfgCcsrGenCr7;
+ UINT8 Res63c[0x658-0x63c];
+ UINT32 DcfgCcsrcGenSr1;
+ UINT32 DcfgCcsrcGenSr0;
+ UINT8 Res660[0x678-0x660];
+ UINT32 DcfgCcsrcGenCr1;
+ UINT32 DcfgCcsrcGenCr0;
+ UINT8 Res680[0x700-0x680];
+ UINT32 DcfgCcsrSrIoPstecr;
+ UINT32 DcfgCcsrDcsrCr;
+ UINT8 Res708[0x740-0x708]; /* add more registers when needed */
+ UINT32 TpItyp[64]; /* Topology Initiator Type Register */
+ struct {
+ UINT32 Upper;
+ UINT32 Lower;
+ } TpCluster[16];
+ UINT8 Res8c0[0xa00-0x8c0]; /* add more registers when needed */
+ UINT32 DcfgCcsrQmBmWarmRst;
+ UINT8 Resa04[0xa20-0xa04]; /* add more registers when needed */
+ UINT32 DcfgCcsrReserved0;
+ UINT32 DcfgCcsrReserved1;
+} CCSR_GUR;
+
+/* Supplemental Configuration Unit */
+typedef struct {
+ UINT8 Res000[0x070-0x000];
+ UINT32 Usb1Prm1Cr;
+ UINT32 Usb1Prm2Cr;
+ UINT32 Usb1Prm3Cr;
+ UINT32 Usb2Prm1Cr;
+ UINT32 Usb2Prm2Cr;
+ UINT32 Usb2Prm3Cr;
+ UINT32 Usb3Prm1Cr;
+ UINT32 Usb3Prm2Cr;
+ UINT32 Usb3Prm3Cr;
+ UINT8 Res094[0x100-0x094];
+ UINT32 Usb2Icid;
+ UINT32 Usb3Icid;
+ UINT8 Res108[0x114-0x108];
+ UINT32 DmaIcid;
+ UINT32 SataIcid;
+ UINT32 Usb1Icid;
+ UINT32 QeIcid;
+ UINT32 SdhcIcid;
+ UINT32 EdmaIcid;
+ UINT32 EtrIcid;
+ UINT32 Core0SftRst;
+ UINT32 Core1SftRst;
+ UINT32 Core2SftRst;
+ UINT32 Core3SftRst;
+ UINT8 Res140[0x158-0x140];
+ UINT32 AltCBar;
+ UINT32 QspiCfg;
+ UINT8 Res160[0x180-0x160];
+ UINT32 DmaMcr;
+ UINT8 Res184[0x188-0x184];
+ UINT32 GicAlign;
+ UINT32 DebugIcid;
+ UINT8 Res190[0x1a4-0x190];
+ UINT32 SnpCnfGcr;
+#define CCSR_SCFG_SNPCNFGCR_SECRDSNP BIT31
+#define CCSR_SCFG_SNPCNFGCR_SECWRSNP BIT30
+#define CCSR_SCFG_SNPCNFGCR_SATARDSNP BIT23
+#define CCSR_SCFG_SNPCNFGCR_SATAWRSNP BIT22
+#define CCSR_SCFG_SNPCNFGCR_USB1RDSNP BIT21
+#define CCSR_SCFG_SNPCNFGCR_USB1WRSNP BIT20
+#define CCSR_SCFG_SNPCNFGCR_USB2RDSNP BIT15
+#define CCSR_SCFG_SNPCNFGCR_USB2WRSNP BIT16
+#define CCSR_SCFG_SNPCNFGCR_USB3RDSNP BIT13
+#define CCSR_SCFG_SNPCNFGCR_USB3WRSNP BIT14
+ UINT8 Res1a8[0x1ac-0x1a8];
+ UINT32 IntpCr;
+ UINT8 Res1b0[0x204-0x1b0];
+ UINT32 CoreSrEnCr;
+ UINT8 Res208[0x220-0x208];
+ UINT32 RvBar00;
+ UINT32 RvBar01;
+ UINT32 RvBar10;
+ UINT32 RvBar11;
+ UINT32 RvBar20;
+ UINT32 RvBar21;
+ UINT32 RvBar30;
+ UINT32 RvBar31;
+ UINT32 LpmCsr;
+ UINT8 Res244[0x400-0x244];
+ UINT32 QspIdQScr;
+ UINT32 EcgTxcMcr;
+ UINT32 SdhcIoVSelCr;
+ UINT32 RcwPMuxCr0;
+ /**Setting RCW PinMux Register bits 17-19 to select USB2_DRVVBUS
+ *Setting RCW PinMux Register bits 21-23 to select USB2_PWRFAULT
+ *Setting RCW PinMux Register bits 25-27 to select USB3_DRVVBUS
+ Setting RCW PinMux Register bits 29-31 to select USB3_DRVVBUS*/
+#define CCSR_SCFG_RCWPMUXCRO_SELCR_USB 0x3333
+ /**Setting RCW PinMux Register bits 17-19 to select USB2_DRVVBUS
+ *Setting RCW PinMux Register bits 21-23 to select USB2_PWRFAULT
+ *Setting RCW PinMux Register bits 25-27 to select IIC4_SCL
+ Setting RCW PinMux Register bits 29-31 to select IIC4_SDA*/
+#define CCSR_SCFG_RCWPMUXCRO_NOT_SELCR_USB 0x3300
+ UINT32 UsbDrvVBusSelCr;
+#define CCSR_SCFG_USBDRVVBUS_SELCR_USB1 0x00000000
+#define CCSR_SCFG_USBDRVVBUS_SELCR_USB2 0x00000001
+#define CCSR_SCFG_USBDRVVBUS_SELCR_USB3 0x00000003
+ UINT32 UsbPwrFaultSelCr;
+#define CCSR_SCFG_USBPWRFAULT_INACTIVE 0x00000000
+#define CCSR_SCFG_USBPWRFAULT_SHARED 0x00000001
+#define CCSR_SCFG_USBPWRFAULT_DEDICATED 0x00000002
+#define CCSR_SCFG_USBPWRFAULT_USB3_SHIFT 4
+#define CCSR_SCFG_USBPWRFAULT_USB2_SHIFT 2
+#define CCSR_SCFG_USBPWRFAULT_USB1_SHIFT 0
+ UINT32 UsbRefclkSelcr1;
+ UINT32 UsbRefclkSelcr2;
+ UINT32 UsbRefclkSelcr3;
+ UINT8 Res424[0x600-0x424];
+ UINT32 ScratchRw[4];
+ UINT8 Res610[0x680-0x610];
+ UINT32 CoreBCr;
+ UINT8 Res684[0x1000-0x684];
+ UINT32 Pex1MsiIr;
+ UINT32 Pex1MsiR;
+ UINT8 Res1008[0x2000-0x1008];
+ UINT32 Pex2;
+ UINT32 Pex2MsiR;
+ UINT8 Res2008[0x3000-0x2008];
+ UINT32 Pex3MsiIr;
+ UINT32 Pex3MsiR;
+} CCSR_SCFG;
+
+#define USB_TXVREFTUNE 0x9
+#define USB_SQRXTUNE 0xFC7FFFFF
+#define USB_PCSTXSWINGFULL 0x47
+#define USB_PHY_RX_EQ_VAL_1 0x0000
+#define USB_PHY_RX_EQ_VAL_2 0x8000
+#define USB_PHY_RX_EQ_VAL_3 0x8003
+#define USB_PHY_RX_EQ_VAL_4 0x800b
+
+/*USB_PHY_SS memory map*/
+typedef struct {
+ UINT16 IpIdcodeLo;
+ UINT16 SupIdcodeHi;
+ UINT8 Res4[0x0006-0x0004];
+ UINT16 RtuneDebug;
+ UINT16 RtuneStat;
+ UINT16 SupSsPhase;
+ UINT16 SsFreq;
+ UINT8 ResE[0x0020-0x000e];
+ UINT16 Ateovrd;
+ UINT16 MpllOvrdInLo;
+ UINT8 Res24[0x0026-0x0024];
+ UINT16 SscOvrdIn;
+ UINT8 Res28[0x002A-0x0028];
+ UINT16 LevelOvrdIn;
+ UINT8 Res2C[0x0044-0x002C];
+ UINT16 ScopeCount;
+ UINT8 Res46[0x0060-0x0046];
+ UINT16 MpllLoopCtl;
+ UINT8 Res62[0x006C-0x0062];
+ UINT16 SscClkCntrl;
+ UINT8 Res6E[0x2002-0x006E];
+ UINT16 Lane0TxOvrdInHi;
+ UINT16 Lane0TxOvrdDrvLo;
+ UINT8 Res2006[0x200C-0x2006];
+ UINT16 Lane0RxOvrdInHi;
+ UINT8 Res200E[0x2022-0x200E];
+ UINT16 Lane0TxCmWaitTimeOvrd;
+ UINT8 Res2024[0x202A-0x2024];
+ UINT16 Lane0TxLbertCtl;
+ UINT16 Lane0RxLbertCtl;
+ UINT16 Lane0RxLbertErr;
+ UINT8 Res2030[0x205A-0x2030];
+ UINT16 Lane0TxAltBlock;
+} CCSR_USB_PHY;
+
+/* Clocking */
+typedef struct {
+ struct {
+ UINT32 ClkCnCSr; /* core cluster n clock control status */
+ UINT8 Res004[0x0c];
+ UINT32 ClkcGHwAcSr; /* Clock generator n hardware accelerator */
+ UINT8 Res014[0x0c];
+ } ClkcSr[4];
+ UINT8 Res040[0x780]; /* 0x100 */
+ struct {
+ UINT32 PllCnGSr;
+ UINT8 Res804[0x1c];
+ } PllCgSr[2];
+ UINT8 Res840[0x1c0];
+ UINT32 ClkPCSr; /* 0xa00 Platform clock domain control/status */
+ UINT8 Resa04[0x1fc];
+ UINT32 PllPGSr; /* 0xc00 Platform PLL General Status */
+ UINT8 Resc04[0x1c];
+ UINT32 PllDGSr; /* 0xc20 DDR PLL General Status */
+ UINT8 Resc24[0x3dc];
+} CCSR_CLOCK;
+
+VOID
+GetSysInfo (
+ OUT SYS_INFO *
+ );
+
+UINT32
+EFIAPI
+GurRead (
+ IN UINTN Address
+ );
+
+#endif /* __SOC_H__ */
diff --git a/Silicon/NXP/Chassis/LS1043aSocLib.inf b/Silicon/NXP/Chassis/LS1043aSocLib.inf
new file mode 100644
index 0000000..c914b27
--- /dev/null
+++ b/Silicon/NXP/Chassis/LS1043aSocLib.inf
@@ -0,0 +1,48 @@
+# @file
+#
+# Copyright 2017 NXP
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = SocLib
+ FILE_GUID = 736343a0-1d96-11e0-aaaa-0002a5d5c51b
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = SocLib
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ edk2-platforms/Platform/NXP/NxpQoriqLs.dec
+ edk2-platforms/Silicon/NXP/Chassis/Chassis2/Chassis2.dec
+ edk2-platforms/Silicon/NXP/LS1043A/LS1043A.dec
+
+[LibraryClasses]
+ BaseLib
+ BeIoLib
+ DebugLib
+ SerialPortLib
+ UtilsLib
+
+[Sources.common]
+ Chassis.c
+ Chassis2/Soc.c
+ SerDes.c
+
+[FixedPcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString
+ gNxpQoriqLsTokenSpaceGuid.PcdGutsBaseAddr
+ gNxpQoriqLsTokenSpaceGuid.PcdPlatformFreqDiv
+ gNxpQoriqLsTokenSpaceGuid.PcdSerdes2Enabled
+ gNxpQoriqLsTokenSpaceGuid.PcdGurBigEndian
+ gNxpQoriqLsTokenSpaceGuid.PcdClkBaseAddr
diff --git a/Silicon/NXP/Chassis/SerDes.c b/Silicon/NXP/Chassis/SerDes.c
new file mode 100644
index 0000000..28d9847
--- /dev/null
+++ b/Silicon/NXP/Chassis/SerDes.c
@@ -0,0 +1,253 @@
+/** SerDes.c
+ Provides the basic interfaces for SerDes Module
+
+ Copyright 2017 NXP
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Bitops.h>
+#include <Library/DebugLib.h>
+#include <SerDes.h>
+#include <SocSerDes.h>
+#include <Soc.h>
+#include <Uefi.h>
+
+UINT64 *SerDesPrtclMap;
+
+/**
+ Function to get serdes Lane protocol corresponding to
+ serdes protocol.
+
+ @param SerDes Serdes number.
+ @param Cfg Serdes Protocol.
+ @param Lane Serdes Lane number.
+
+ @return Serdes Lane protocol.
+
+**/
+SERDES_PROTOCOL
+GetSerDesPrtcl (
+ IN INTN SerDes,
+ IN INTN Cfg,
+ IN INTN Lane
+ )
+{
+ SERDES_CONFIG *Config;
+
+ if (SerDes >= ARRAY_SIZE(SerDesConfigTbl)) {
+ return 0;
+ }
+
+ Config = SerDesConfigTbl[SerDes];
+ while (Config->Protocol) {
+ if (Config->Protocol == Cfg) {
+ return Config->SrdsLane[Lane];
+ }
+ Config++;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Function to check if inputted protocol is a valid serdes protocol.
+
+ @param SerDes Serdes number.
+ @param Prtcl Serdes Protocol to be verified.
+
+ @return EFI_INVALID_PARAMETER Input parameter in invalid.
+ @return EFI_NOT_FOUND Serdes Protocol not a valid protocol.
+ @return EFI_SUCCESS Serdes Protocol is a valid protocol.
+
+**/
+EFI_STATUS
+CheckSerDesPrtclValid (
+ IN INTN SerDes,
+ IN UINT32 Prtcl
+ )
+{
+ SERDES_CONFIG *Config;
+ INTN Cnt;
+
+ if (SerDes >= ARRAY_SIZE(SerDesConfigTbl)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Config = SerDesConfigTbl[SerDes];
+ while (Config->Protocol) {
+ if (Config->Protocol == Prtcl) {
+ DEBUG((DEBUG_INFO, "Protocol: %x Matched with the one in Table\n", Prtcl));
+ break;
+ }
+ Config++;
+ }
+
+ if (!Config->Protocol) {
+ return EFI_NOT_FOUND;
+ }
+
+ for (Cnt = 0; Cnt < SRDS_MAX_LANES; Cnt++) {
+ if (Config->SrdsLane[Cnt] != NONE) {
+ return EFI_SUCCESS;
+ }
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+/**
+ Function to fill serdes map information.
+
+ @param Srds Serdes number.
+ @param SERDES_PROTOCOLMask Serdes Protocol Mask.
+ @param SERDES_PROTOCOLShift Serdes Protocol shift value.
+ @param SerDesPrtclMap Pointer to Serdes Protocol map.
+
+**/
+VOID
+LSSerDesMap (
+ IN UINT32 Srds,
+ IN UINT32 SERDES_PROTOCOLMask,
+ IN UINT32 SERDES_PROTOCOLShift,
+ OUT UINT64 *SerDesPrtclMap
+ )
+{
+ CCSR_GUR *Gur;
+ UINT32 SrdsProt;
+ INTN Lane;
+ UINT32 Flag;
+
+ Gur = (VOID *)PcdGet64(PcdGutsBaseAddr);
+ *SerDesPrtclMap = 0x0;
+ Flag = 0;
+
+ SrdsProt = GurRead((UINTN)&Gur->RcwSr[RCWSR_INDEX]) & SERDES_PROTOCOLMask;
+ SrdsProt >>= SERDES_PROTOCOLShift;
+
+ DEBUG((DEBUG_INFO, "Using SERDES%d Protocol: %d (0x%x)\n",
+ Srds + 1, SrdsProt, SrdsProt));
+
+ if (EFI_SUCCESS != CheckSerDesPrtclValid(Srds, SrdsProt)) {
+ DEBUG((DEBUG_ERROR, "SERDES%d[PRTCL] = 0x%x is not valid\n",
+ Srds + 1, SrdsProt));
+ Flag++;
+ }
+
+ for (Lane = 0; Lane < SRDS_MAX_LANES; Lane++) {
+ SERDES_PROTOCOL LanePrtcl = GetSerDesPrtcl(Srds, SrdsProt, Lane);
+ if (LanePrtcl >= SERDES_PRTCL_COUNT) {
+ DEBUG((DEBUG_ERROR, "Unknown SerDes lane protocol %d\n", LanePrtcl));
+ Flag++;
+ } else {
+ *SerDesPrtclMap |= BIT(LanePrtcl);
+ }
+ }
+
+ if (Flag) {
+ DEBUG((DEBUG_ERROR, "Could not configure SerDes module!!\n"));
+ } else {
+ DEBUG((DEBUG_INFO, "Successfully configured SerDes module!!\n"));
+ }
+}
+
+STATIC
+VOID
+SerDesInstanceProbeLanes (
+ IN UINT32 Srds,
+ IN UINT32 SERDES_PROTOCOLMask,
+ IN UINT32 SERDES_PROTOCOLShift,
+ IN SERDES_PROBE_LANES_CALLBACK *SerDesLaneProbeCallback,
+ IN VOID *Arg
+ )
+{
+
+ CCSR_GUR *Gur;
+ UINT32 SrdsProt;
+ INTN Lane;
+
+ Gur = (VOID *)PcdGet64(PcdGutsBaseAddr);;
+
+ SrdsProt = GurRead((UINTN)&Gur->RcwSr[RCWSR_INDEX]) & SERDES_PROTOCOLMask;
+ SrdsProt >>= SERDES_PROTOCOLShift;
+
+ /*
+ * Invoke callback for all lanes in the SerDes instance:
+ */
+ for (Lane = 0; Lane < SRDS_MAX_LANES; Lane++) {
+ SERDES_PROTOCOL LanePrtcl = GetSerDesPrtcl(Srds, SrdsProt, Lane);
+ if (LanePrtcl >= SERDES_PRTCL_COUNT || LanePrtcl < NONE) {
+ DEBUG((DEBUG_ERROR, "Unknown SerDes lane protocol %d\n", LanePrtcl));
+ }
+ else if (LanePrtcl != NONE) {
+ SerDesLaneProbeCallback(LanePrtcl, Arg);
+ }
+ }
+}
+
+VOID
+SerDesProbeLanes (
+ IN SERDES_PROBE_LANES_CALLBACK *SerDesLaneProbeCallback,
+ IN VOID *Arg
+ )
+{
+ SerDesInstanceProbeLanes(SRDS_1,
+ RCWSR_SRDS1_PRTCL_MASK,
+ RCWSR_SRDS1_PRTCL_SHIFT,
+ SerDesLaneProbeCallback,
+ Arg);
+
+ if (PcdGetBool(PcdSerdes2Enabled)) {
+ SerDesInstanceProbeLanes(SRDS_2,
+ RCWSR_SRDS2_PRTCL_MASK,
+ RCWSR_SRDS2_PRTCL_SHIFT,
+ SerDesLaneProbeCallback,
+ Arg);
+ }
+}
+
+/**
+ Function to return Serdes protocol map for all serdes available on board.
+
+ @param SerDesPrtclMap Pointer to Serdes protocl map.
+
+**/
+VOID
+GetSerdesProtocolMaps (
+ OUT UINT64 *SerDesPrtclMap
+ )
+{
+ LSSerDesMap(SRDS_1,
+ RCWSR_SRDS1_PRTCL_MASK,
+ RCWSR_SRDS1_PRTCL_SHIFT,
+ SerDesPrtclMap);
+
+ if (PcdGetBool(PcdSerdes2Enabled)) {
+ LSSerDesMap(SRDS_2,
+ RCWSR_SRDS2_PRTCL_MASK,
+ RCWSR_SRDS2_PRTCL_SHIFT,
+ SerDesPrtclMap);
+ }
+
+}
+
+BOOLEAN
+IsSerDesLaneProtocolConfigured (
+ IN UINT64 SerDesPrtclMap,
+ IN SERDES_PROTOCOL Device
+ )
+{
+ if (Device >= SERDES_PRTCL_COUNT || Device < NONE) {
+ ASSERT(Device > NONE && Device < SERDES_PRTCL_COUNT);
+ DEBUG((DEBUG_ERROR, "Unknown SerDes lane protocol Device %d\n", Device));
+ }
+
+ return (SerDesPrtclMap & BIT(Device)) != 0 ;
+}
diff --git a/Silicon/NXP/LS1043A/Include/SocSerDes.h b/Silicon/NXP/LS1043A/Include/SocSerDes.h
new file mode 100644
index 0000000..90e165f
--- /dev/null
+++ b/Silicon/NXP/LS1043A/Include/SocSerDes.h
@@ -0,0 +1,55 @@
+/** @file
+ The Header file of SerDes Module for LS1043A
+
+ Copyright 2017 NXP
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __SOC_SERDES_H__
+#define __SOC_SERDES_H__
+
+#include <SerDes.h>
+
+SERDES_CONFIG SerDes1ConfigTbl[] = {
+ /* SerDes 1 */
+ {0x1555, {XFI_FM1_MAC9, PCIE1, PCIE2, PCIE3 } },
+ {0x2555, {SGMII_2500_FM1_DTSEC9, PCIE1, PCIE2, PCIE3 } },
+ {0x4555, {QSGMII_FM1_A, PCIE1, PCIE2, PCIE3 } },
+ {0x4558, {QSGMII_FM1_A, PCIE1, PCIE2, SATA } },
+ {0x1355, {XFI_FM1_MAC9, SGMII_FM1_DTSEC2, PCIE2, PCIE3 } },
+ {0x2355, {SGMII_2500_FM1_DTSEC9, SGMII_FM1_DTSEC2, PCIE2, PCIE3 } },
+ {0x3335, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC5, PCIE3 } },
+ {0x3355, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, PCIE2, PCIE3 } },
+ {0x3358, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, PCIE2, SATA } },
+ {0x3555, {SGMII_FM1_DTSEC9, PCIE1, PCIE2, PCIE3 } },
+ {0x3558, {SGMII_FM1_DTSEC9, PCIE1, PCIE2, SATA } },
+ {0x7000, {PCIE1, PCIE1, PCIE1, PCIE1 } },
+ {0x9998, {PCIE1, PCIE2, PCIE3, SATA } },
+ {0x6058, {PCIE1, PCIE1, PCIE2, SATA } },
+ {0x1455, {XFI_FM1_MAC9, QSGMII_FM1_A, PCIE2, PCIE3 } },
+ {0x2455, {SGMII_2500_FM1_DTSEC9, QSGMII_FM1_A, PCIE2, PCIE3 } },
+ {0x2255, {SGMII_2500_FM1_DTSEC9, SGMII_2500_FM1_DTSEC2, PCIE2, PCIE3 } },
+ {0x3333, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6 } },
+ {0x1460, {XFI_FM1_MAC9, QSGMII_FM1_A, PCIE3, PCIE3 } },
+ {0x2460, {SGMII_2500_FM1_DTSEC9, QSGMII_FM1_A, PCIE3, PCIE3 } },
+ {0x3460, {SGMII_FM1_DTSEC9, QSGMII_FM1_A, PCIE3, PCIE3 } },
+ {0x3455, {SGMII_FM1_DTSEC9, QSGMII_FM1_A, PCIE2, PCIE3 } },
+ {0x9960, {PCIE1, PCIE2, PCIE3, PCIE3 } },
+ {0x2233, {SGMII_2500_FM1_DTSEC9, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6 } },
+ {0x2533, {SGMII_2500_FM1_DTSEC9, PCIE1, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6 } },
+ {}
+};
+
+SERDES_CONFIG *SerDesConfigTbl[] = {
+ SerDes1ConfigTbl
+};
+
+#endif /* __SOC_SERDES_H */
--
1.9.1
next prev parent reply other threads:[~2017-11-07 8:50 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-07 14:42 [PATCH 00/10] edk2-platforms/Platform/NXP Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 01/10] Platform/NXP: Library to provide helper functions Meenakshi Aggarwal
2017-11-13 12:06 ` Ard Biesheuvel
2017-11-14 5:15 ` Meenakshi Aggarwal
2017-11-13 13:14 ` Leif Lindholm
2017-11-14 5:52 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 02/10] Platform/NXP: Add support for system reset library Meenakshi Aggarwal
2017-11-13 12:09 ` Ard Biesheuvel
2017-11-14 5:19 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 03/10] Platform/NXP: Add support for Big Endian Mmio APIs Meenakshi Aggarwal
2017-11-13 12:26 ` Ard Biesheuvel
2017-11-14 4:10 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 04/10] Platform/NXP : Add support for Watchdog driver Meenakshi Aggarwal
2017-11-13 12:23 ` Ard Biesheuvel
2017-11-14 5:36 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 05/10] Platform/NXP : Add support for DUART library Meenakshi Aggarwal
2017-11-13 12:28 ` Ard Biesheuvel
2017-11-14 4:12 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 06/10] Platform/NXP: Add support for I2c operations library Meenakshi Aggarwal
2017-11-13 12:36 ` Ard Biesheuvel
2017-11-14 5:36 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 07/10] Platform/NXP : Add support for DS1307 RTC library Meenakshi Aggarwal
2017-11-13 12:42 ` Ard Biesheuvel
2017-11-14 5:51 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 08/10] Platform/NXP: Add support for ArmPlatformLib Meenakshi Aggarwal
2017-11-07 14:42 ` Meenakshi Aggarwal [this message]
2017-11-07 14:42 ` [PATCH 10/10] Compilation : Add the fdf, dsc and dec files Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 1/9] Platform/NXP: Add support for Big Endian Mmio APIs Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 2/9] Platform/NXP : Add support for Watchdog driver Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 3/9] SocLib : Add support for initialization of peripherals Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 4/9] Platform/NXP : Add support for DUART library Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 5/9] Platform/NXP: Add support for I2c driver Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 6/9] Silicon/Maxim : Add support for DS1307 RTC library Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 7/9] Platform/NXP: Add support for ArmPlatformLib Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 8/9] Compilation : Add the fdf, dsc and dec files Meenakshi Aggarwal
2017-11-22 15:49 ` [PATCH v2 9/9] Build : Add build script and environment script Meenakshi Aggarwal
2017-11-26 15:48 ` [PATCH v2 1/9] Platform/NXP: Add support for Big Endian Mmio APIs Leif Lindholm
2017-11-27 5:08 ` Meenakshi Aggarwal
2017-11-27 7:10 ` Udit Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510065736-9394-10-git-send-email-meenakshi.aggarwal@nxp.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox