From: Star Zeng <star.zeng@intel.com>
To: edk2-devel@lists.01.org
Cc: Star Zeng <star.zeng@intel.com>, Jiewen Yao <jiewen.yao@intel.com>
Subject: [PATCH] MdeModulePkg EhciPei: Support IoMmu
Date: Thu, 16 Nov 2017 15:47:34 +0800 [thread overview]
Message-ID: <1510818454-54360-1-git-send-email-star.zeng@intel.com> (raw)
Update the EhciPei driver to consume IOMMU_PPI to allocate DMA buffer.
If no IOMMU_PPI exists, this driver still calls PEI service to allocate
DMA buffer, with assumption that DRAM==DMA.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
---
MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c | 250 +++++++++++++++++++++++++++++++
MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c | 4 +-
MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h | 110 +++++++++++++-
MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf | 5 +-
MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c | 38 +++--
MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c | 42 ++++--
MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c | 84 +++++++++--
MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h | 18 ++-
8 files changed, 506 insertions(+), 45 deletions(-)
create mode 100644 MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c b/MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
new file mode 100644
index 000000000000..1330f53f411a
--- /dev/null
+++ b/MdeModulePkg/Bus/Pci/EhciPei/DmaMem.c
@@ -0,0 +1,250 @@
+/** @file
+The DMA memory help functions.
+
+Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "EhcPeim.h"
+
+/**
+ Provides the controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
+EFI_STATUS
+IoMmuMap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN EDKII_IOMMU_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ )
+{
+ EFI_STATUS Status;
+ UINT64 Attribute;
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->Map (
+ IoMmu,
+ Operation,
+ HostAddress,
+ NumberOfBytes,
+ DeviceAddress,
+ Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ switch (Operation) {
+ case EdkiiIoMmuOperationBusMasterRead:
+ case EdkiiIoMmuOperationBusMasterRead64:
+ Attribute = EDKII_IOMMU_ACCESS_READ;
+ break;
+ case EdkiiIoMmuOperationBusMasterWrite:
+ case EdkiiIoMmuOperationBusMasterWrite64:
+ Attribute = EDKII_IOMMU_ACCESS_WRITE;
+ break;
+ case EdkiiIoMmuOperationBusMasterCommonBuffer:
+ case EdkiiIoMmuOperationBusMasterCommonBuffer64:
+ Attribute = EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE;
+ break;
+ default:
+ ASSERT(FALSE);
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = IoMmu->SetAttribute (
+ IoMmu,
+ *Mapping,
+ Attribute
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->Unmap (IoMmu, Mapping);
+ *Mapping = NULL;
+ return Status;
+ }
+ } else {
+ *DeviceAddress = (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress;
+ *Mapping = NULL;
+ Status = EFI_SUCCESS;
+ }
+ return Status;
+}
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuUnmap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN VOID *Mapping
+ )
+{
+ if (IoMmu != NULL) {
+ IoMmu->SetAttribute (IoMmu, Mapping, 0);
+ IoMmu->Unmap (IoMmu, Mapping);
+ }
+}
+
+/**
+ Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
+ OperationBusMasterCommonBuffer64 mapping.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+IoMmuAllocateBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ )
+{
+ EFI_STATUS Status;
+ UINTN NumberOfBytes;
+ EFI_PHYSICAL_ADDRESS HostPhyAddress;
+
+ *HostAddress = NULL;
+ *DeviceAddress = 0;
+ *Mapping = NULL;
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->AllocateBuffer (
+ IoMmu,
+ EfiBootServicesData,
+ Pages,
+ HostAddress,
+ 0
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ NumberOfBytes = EFI_PAGES_TO_SIZE (Pages);
+ Status = IoMmu->Map (
+ IoMmu,
+ EdkiiIoMmuOperationBusMasterCommonBuffer,
+ *HostAddress,
+ &NumberOfBytes,
+ DeviceAddress,
+ Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
+ *HostAddress = NULL;
+ return EFI_OUT_OF_RESOURCES;
+ }
+ Status = IoMmu->SetAttribute (
+ IoMmu,
+ *Mapping,
+ EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->Unmap (IoMmu, *Mapping);
+ IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
+ *Mapping = NULL;
+ *HostAddress = NULL;
+ return Status;
+ }
+ } else {
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesCode,
+ Pages,
+ &HostPhyAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ *HostAddress = (VOID *) (UINTN) HostPhyAddress;
+ *DeviceAddress = HostPhyAddress;
+ *Mapping = NULL;
+ }
+ return Status;
+}
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuFreeBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ IN VOID *HostAddress,
+ IN VOID *Mapping
+ )
+{
+ if (IoMmu != NULL) {
+ IoMmu->SetAttribute (IoMmu, Mapping, 0);
+ IoMmu->Unmap (IoMmu, Mapping);
+ IoMmu->FreeBuffer (IoMmu, Pages, HostAddress);
+ }
+}
+
+/**
+ Initialize IOMMU.
+
+ @param IoMmu Pointer to pointer to IOMMU PPI.
+
+**/
+VOID
+IoMmuInit (
+ OUT EDKII_IOMMU_PPI **IoMmu
+ )
+{
+ PeiServicesLocatePpi (
+ &gEdkiiIoMmuPpiGuid,
+ 0,
+ NULL,
+ (VOID **) IoMmu
+ );
+}
+
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
index 31647ff0525c..45fe71802cc4 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c
@@ -2,7 +2,7 @@
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -1219,6 +1219,8 @@ EhcPeimEntry (
EhcDev->Signature = USB2_HC_DEV_SIGNATURE;
+ IoMmuInit (&EhcDev->IoMmu);
+
EhcDev->UsbHostControllerBaseAddress = (UINT32) BaseAddress;
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
index d7a68d909547..791a18e6f2ee 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.h
@@ -1,7 +1,7 @@
/** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -21,6 +21,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#include <Ppi/UsbController.h>
#include <Ppi/Usb2HostController.h>
+#include <Ppi/IoMmu.h>
#include <Library/DebugLib.h>
#include <Library/PeimEntryPoint.h>
@@ -94,6 +95,7 @@ typedef struct _PEI_USB2_HC_DEV PEI_USB2_HC_DEV;
struct _PEI_USB2_HC_DEV {
UINTN Signature;
PEI_USB2_HOST_CONTROLLER_PPI Usb2HostControllerPpi;
+ EDKII_IOMMU_PPI *IoMmu;
EFI_PEI_PPI_DESCRIPTOR PpiDescriptor;
UINT32 UsbHostControllerBaseAddress;
PEI_URB *Urb;
@@ -122,7 +124,6 @@ struct _PEI_USB2_HC_DEV {
// Periodic (interrupt) transfer schedule data:
//
VOID *PeriodFrame; // Mapped as common buffer
- VOID *PeriodFrameHost;
VOID *PeriodFrameMap;
PEI_EHC_QH *PeriodOne;
@@ -173,7 +174,8 @@ UsbHcInitMemPool (
/**
Release the memory management pool.
-
+
+ @param Ehc The EHCI device.
@param Pool The USB memory pool to free.
@retval EFI_DEVICE_ERROR Fail to free the memory pool.
@@ -182,6 +184,7 @@ UsbHcInitMemPool (
**/
EFI_STATUS
UsbHcFreeMemPool (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool
)
;
@@ -208,6 +211,7 @@ UsbHcAllocateMem (
/**
Free the allocated memory back to the memory pool.
+ @param Ehc The EHCI device.
@param Pool The memory pool of the host controller.
@param Mem The memory to free.
@param Size The size of the memory to free.
@@ -215,10 +219,110 @@ UsbHcAllocateMem (
**/
VOID
UsbHcFreeMem (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool,
IN VOID *Mem,
IN UINTN Size
)
;
+/**
+ Provides the controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
+EFI_STATUS
+IoMmuMap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN EDKII_IOMMU_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuUnmap (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN VOID *Mapping
+ );
+
+/**
+ Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
+ OperationBusMasterCommonBuffer64 mapping.
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+IoMmuAllocateBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param IoMmu Pointer to IOMMU PPI.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuFreeBuffer (
+ IN EDKII_IOMMU_PPI *IoMmu,
+ IN UINTN Pages,
+ IN VOID *HostAddress,
+ IN VOID *Mapping
+ );
+
+/**
+ Initialize IOMMU.
+
+ @param IoMmu Pointer to pointer to IOMMU PPI.
+
+**/
+VOID
+IoMmuInit (
+ OUT EDKII_IOMMU_PPI **IoMmu
+ );
+
#endif
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
index 7083f8668150..0c40187f9eb6 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciPei.inf
@@ -4,7 +4,7 @@
# It produces gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
# which is used to enable recovery function from USB Drivers.
#
-# Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions
@@ -43,6 +43,7 @@ [Sources]
EhciSched.h
EhciUrb.h
UsbHcMem.h
+ DmaMem.c
[Packages]
@@ -61,7 +62,7 @@ [LibraryClasses]
[Ppis]
gPeiUsb2HostControllerPpiGuid ## PRODUCES
gPeiUsbControllerPpiGuid ## CONSUMES
-
+ gEdkiiIoMmuPpiGuid ## CONSUMES
[Depex]
gEfiPeiMemoryDiscoveredPpiGuid AND gPeiUsbControllerPpiGuid AND gEfiPeiBootInRecoveryModePpiGuid
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
index e992d4f28797..606a53db1da1 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciSched.c
@@ -2,7 +2,7 @@
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2013, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -107,11 +107,13 @@ EhcInitSched (
IN PEI_USB2_HC_DEV *Ehc
)
{
+ VOID *Buf;
EFI_PHYSICAL_ADDRESS PhyAddr;
VOID *Map;
UINTN Index;
UINT32 *Desc;
EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS PciAddr;
//
// First initialize the periodical schedule data:
@@ -124,15 +126,19 @@ EhcInitSched (
// The Frame List ocupies 4K bytes,
// and must be aligned on 4-Kbyte boundaries.
//
- Status = PeiServicesAllocatePages (
- EfiBootServicesCode,
+ Status = IoMmuAllocateBuffer (
+ Ehc->IoMmu,
1,
- &PhyAddr
+ &Buf,
+ &PhyAddr,
+ &Map
);
- Map = NULL;
- Ehc->PeriodFrameHost = (VOID *)(UINTN)PhyAddr;
- Ehc->PeriodFrame = (VOID *)(UINTN)PhyAddr;
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Ehc->PeriodFrame = Buf;
Ehc->PeriodFrameMap = Map;
Ehc->High32bitAddr = EHC_HIGH_32BIT (PhyAddr);
@@ -161,19 +167,20 @@ EhcInitSched (
// Initialize the frame list entries then set the registers
//
Desc = (UINT32 *) Ehc->PeriodFrame;
-
+ PciAddr = UsbHcGetPciAddressForHostMem (Ehc->MemPool, Ehc->PeriodOne, sizeof (PEI_EHC_QH));
for (Index = 0; Index < EHC_FRAME_LEN; Index++) {
- Desc[Index] = QH_LINK (Ehc->PeriodOne, EHC_TYPE_QH, FALSE);
+ Desc[Index] = QH_LINK (PciAddr, EHC_TYPE_QH, FALSE);
}
- EhcWriteOpReg (Ehc, EHC_FRAME_BASE_OFFSET, EHC_LOW_32BIT (Ehc->PeriodFrame));
+ EhcWriteOpReg (Ehc, EHC_FRAME_BASE_OFFSET, EHC_LOW_32BIT (PhyAddr));
//
// Second initialize the asynchronous schedule:
// Only need to set the AsynListAddr register to
// the reclamation header
//
- EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, EHC_LOW_32BIT (Ehc->ReclaimHead));
+ PciAddr = UsbHcGetPciAddressForHostMem (Ehc->MemPool, Ehc->ReclaimHead, sizeof (PEI_EHC_QH));
+ EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, EHC_LOW_32BIT (PciAddr));
return EFI_SUCCESS;
}
@@ -192,26 +199,27 @@ EhcFreeSched (
EhcWriteOpReg (Ehc, EHC_ASYNC_HEAD_OFFSET, 0);
if (Ehc->PeriodOne != NULL) {
- UsbHcFreeMem (Ehc->MemPool, Ehc->PeriodOne, sizeof (PEI_EHC_QH));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Ehc->PeriodOne, sizeof (PEI_EHC_QH));
Ehc->PeriodOne = NULL;
}
if (Ehc->ReclaimHead != NULL) {
- UsbHcFreeMem (Ehc->MemPool, Ehc->ReclaimHead, sizeof (PEI_EHC_QH));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Ehc->ReclaimHead, sizeof (PEI_EHC_QH));
Ehc->ReclaimHead = NULL;
}
if (Ehc->ShortReadStop != NULL) {
- UsbHcFreeMem (Ehc->MemPool, Ehc->ShortReadStop, sizeof (PEI_EHC_QTD));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Ehc->ShortReadStop, sizeof (PEI_EHC_QTD));
Ehc->ShortReadStop = NULL;
}
if (Ehc->MemPool != NULL) {
- UsbHcFreeMemPool (Ehc->MemPool);
+ UsbHcFreeMemPool (Ehc, Ehc->MemPool);
Ehc->MemPool = NULL;
}
if (Ehc->PeriodFrame != NULL) {
+ IoMmuFreeBuffer (Ehc->IoMmu, 1, Ehc->PeriodFrame, Ehc->PeriodFrameMap);
Ehc->PeriodFrame = NULL;
}
}
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
index 597a4947f5bc..3dadcd60b6fe 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
+++ b/MdeModulePkg/Bus/Pci/EhciPei/EhciUrb.c
@@ -2,7 +2,7 @@
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -301,7 +301,7 @@ EhcFreeQtds (
Qtd = EFI_LIST_CONTAINER (Entry, PEI_EHC_QTD, QtdList);
RemoveEntryList (&Qtd->QtdList);
- UsbHcFreeMem (Ehc->MemPool, Qtd, sizeof (PEI_EHC_QTD));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Qtd, sizeof (PEI_EHC_QTD));
}
}
@@ -318,13 +318,21 @@ EhcFreeUrb (
IN PEI_URB *Urb
)
{
+ if (Urb->RequestPhy != NULL) {
+ IoMmuUnmap (Ehc->IoMmu, Urb->RequestMap);
+ }
+
+ if (Urb->DataMap != NULL) {
+ IoMmuUnmap (Ehc->IoMmu, Urb->DataMap);
+ }
+
if (Urb->Qh != NULL) {
//
// Ensure that this queue head has been unlinked from the
// schedule data structures. Free all the associated QTDs
//
EhcFreeQtds (Ehc, &Urb->Qh->Qtds);
- UsbHcFreeMem (Ehc->MemPool, Urb->Qh, sizeof (PEI_EHC_QH));
+ UsbHcFreeMem (Ehc, Ehc->MemPool, Urb->Qh, sizeof (PEI_EHC_QH));
}
}
@@ -527,13 +535,11 @@ EhcCreateUrb (
{
USB_ENDPOINT *Ep;
EFI_PHYSICAL_ADDRESS PhyAddr;
+ EDKII_IOMMU_OPERATION MapOp;
EFI_STATUS Status;
UINTN Len;
PEI_URB *Urb;
VOID *Map;
-
-
- Map = NULL;
Urb = Ehc->Urb;
Urb->Signature = EHC_URB_SIG;
@@ -576,24 +582,40 @@ EhcCreateUrb (
//
if (Request != NULL) {
Len = sizeof (EFI_USB_DEVICE_REQUEST);
- PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Request ;
- if ( (Len != sizeof (EFI_USB_DEVICE_REQUEST))) {
+ MapOp = EdkiiIoMmuOperationBusMasterRead;
+ Status = IoMmuMap (Ehc->IoMmu, MapOp, Request, &Len, &PhyAddr, &Map);
+
+ if (EFI_ERROR (Status) || (Len != sizeof (EFI_USB_DEVICE_REQUEST))) {
goto ON_ERROR;
}
Urb->RequestPhy = (VOID *) ((UINTN) PhyAddr);
Urb->RequestMap = Map;
+ } else {
+ Urb->RequestPhy = NULL;
+ Urb->RequestMap = NULL;
}
if (Data != NULL) {
Len = DataLen;
- PhyAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) Data ;
- if ( (Len != DataLen)) {
+
+ if (Ep->Direction == EfiUsbDataIn) {
+ MapOp = EdkiiIoMmuOperationBusMasterWrite;
+ } else {
+ MapOp = EdkiiIoMmuOperationBusMasterRead;
+ }
+
+ Status = IoMmuMap (Ehc->IoMmu, MapOp, Data, &Len, &PhyAddr, &Map);
+
+ if (EFI_ERROR (Status) || (Len != DataLen)) {
goto ON_ERROR;
}
Urb->DataPhy = (VOID *) ((UINTN) PhyAddr);
Urb->DataMap = Map;
+ } else {
+ Urb->DataPhy = NULL;
+ Urb->DataMap = NULL;
}
Status = EhcCreateQtds (Ehc, Urb);
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
index 5f9f5f0718f3..a0419bd85722 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
+++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.c
@@ -2,7 +2,7 @@
PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid
which is used to enable recovery function from USB Drivers.
-Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -79,16 +79,18 @@ UsbHcAllocMemBlock (
Block->Bits = (UINT8 *)(UINTN)TempPtr;
-
- Status = PeiServicesAllocatePages (
- EfiBootServicesCode,
+ Status = IoMmuAllocateBuffer (
+ Ehc->IoMmu,
Pages,
- &TempPtr
+ (VOID **) &BufHost,
+ &MappedAddr,
+ &Mapping
);
- ZeroMem ((VOID *)(UINTN)TempPtr, Pages*EFI_PAGE_SIZE);
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+ ZeroMem (BufHost, Pages*EFI_PAGE_SIZE);
- BufHost = (VOID *)(UINTN)TempPtr;
- MappedAddr = (EFI_PHYSICAL_ADDRESS) (UINTN) BufHost;
//
// Check whether the data structure used by the host controller
// should be restricted into the same 4G
@@ -109,17 +111,21 @@ UsbHcAllocMemBlock (
/**
Free the memory block from the memory pool.
+ @param Ehc The EHCI device.
@param Pool The memory pool to free the block from.
@param Block The memory block to free.
**/
VOID
UsbHcFreeMemBlock (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool,
IN USBHC_MEM_BLOCK *Block
)
{
ASSERT ((Pool != NULL) && (Block != NULL));
+
+ IoMmuFreeBuffer (Ehc->IoMmu, EFI_SIZE_TO_PAGES (Block->BufLen), Block->BufHost, Block->Mapping);
}
/**
@@ -196,6 +202,54 @@ UsbHcAllocMemFromBlock (
}
/**
+ Calculate the corresponding pci bus address according to the Mem parameter.
+
+ @param Pool The memory pool of the host controller.
+ @param Mem The pointer to host memory.
+ @param Size The size of the memory region.
+
+ @return the pci memory address
+**/
+EFI_PHYSICAL_ADDRESS
+UsbHcGetPciAddressForHostMem (
+ IN USBHC_MEM_POOL *Pool,
+ IN VOID *Mem,
+ IN UINTN Size
+ )
+{
+ USBHC_MEM_BLOCK *Head;
+ USBHC_MEM_BLOCK *Block;
+ UINTN AllocSize;
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+ UINTN Offset;
+
+ Head = Pool->Head;
+ AllocSize = USBHC_MEM_ROUND (Size);
+
+ if (Mem == NULL) {
+ return 0;
+ }
+
+ for (Block = Head; Block != NULL; Block = Block->Next) {
+ //
+ // scan the memory block list for the memory block that
+ // completely contains the allocated memory.
+ //
+ if ((Block->BufHost <= (UINT8 *) Mem) && (((UINT8 *) Mem + AllocSize) <= (Block->BufHost + Block->BufLen))) {
+ break;
+ }
+ }
+
+ ASSERT ((Block != NULL));
+ //
+ // calculate the pci memory address for host memory address.
+ //
+ Offset = (UINT8 *)Mem - Block->BufHost;
+ PhyAddr = (EFI_PHYSICAL_ADDRESS)(UINTN) (Block->Buf + Offset);
+ return PhyAddr;
+}
+
+/**
Insert the memory block to the pool's list of the blocks.
@param Head The head of the memory pool's block list.
@@ -316,7 +370,8 @@ UsbHcInitMemPool (
/**
Release the memory management pool.
-
+
+ @param Ehc The EHCI device.
@param Pool The USB memory pool to free.
@retval EFI_DEVICE_ERROR Fail to free the memory pool.
@@ -325,6 +380,7 @@ UsbHcInitMemPool (
**/
EFI_STATUS
UsbHcFreeMemPool (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool
)
{
@@ -337,11 +393,11 @@ UsbHcFreeMemPool (
// UsbHcUnlinkMemBlock can't be used to unlink and free the
// first block.
//
- for (Block = Pool->Head->Next; Block != NULL; Block = Pool->Head->Next) {
- UsbHcFreeMemBlock (Pool, Block);
+ for (Block = Pool->Head->Next; Block != NULL; Block = Block->Next) {
+ UsbHcFreeMemBlock (Ehc, Pool, Block);
}
- UsbHcFreeMemBlock (Pool, Pool->Head);
+ UsbHcFreeMemBlock (Ehc, Pool, Pool->Head);
return EFI_SUCCESS;
}
@@ -425,6 +481,7 @@ UsbHcAllocateMem (
/**
Free the allocated memory back to the memory pool.
+ @param Ehc The EHCI device.
@param Pool The memory pool of the host controller.
@param Mem The memory to free.
@param Size The size of the memory to free.
@@ -432,6 +489,7 @@ UsbHcAllocateMem (
**/
VOID
UsbHcFreeMem (
+ IN PEI_USB2_HC_DEV *Ehc,
IN USBHC_MEM_POOL *Pool,
IN VOID *Mem,
IN UINTN Size
@@ -486,7 +544,7 @@ UsbHcFreeMem (
// Release the current memory block if it is empty and not the head
//
if ((Block != Head) && UsbHcIsMemBlockEmpty (Block)) {
- UsbHcFreeMemBlock (Pool, Block);
+ UsbHcFreeMemBlock (Ehc, Pool, Block);
}
return ;
diff --git a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
index 586d12af9658..717a8c822c90 100644
--- a/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
+++ b/MdeModulePkg/Bus/Pci/EhciPei/UsbHcMem.h
@@ -1,7 +1,7 @@
/** @file
Private Header file for Usb Host Controller PEIM
-Copyright (c) 2010, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -74,4 +74,20 @@ typedef struct _USBHC_MEM_POOL {
} while (0)
+/**
+ Calculate the corresponding pci bus address according to the Mem parameter.
+
+ @param Pool The memory pool of the host controller.
+ @param Mem The pointer to host memory.
+ @param Size The size of the memory region.
+
+ @return the pci memory address
+**/
+EFI_PHYSICAL_ADDRESS
+UsbHcGetPciAddressForHostMem (
+ IN USBHC_MEM_POOL *Pool,
+ IN VOID *Mem,
+ IN UINTN Size
+ );
+
#endif
--
2.7.0.windows.1
reply other threads:[~2017-11-16 7:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1510818454-54360-1-git-send-email-star.zeng@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox