From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received-SPF: None (no SPF record) identity=mailfrom; client-ip=2a00:1450:4010:c07::229; helo=mail-lf0-x229.google.com; envelope-from=mw@semihalf.com; receiver=edk2-devel@lists.01.org Received: from mail-lf0-x229.google.com (mail-lf0-x229.google.com [IPv6:2a00:1450:4010:c07::229]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 05AEF21B00DD4 for ; Mon, 20 Nov 2017 22:42:52 -0800 (PST) Received: by mail-lf0-x229.google.com with SMTP id x76so8190497lfb.6 for ; Mon, 20 Nov 2017 22:47:07 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=semihalf-com.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=5qai7EVJW5hoLpnWtGDq8s8utyB9lJMw3xdEysxZYYg=; b=PVRti7wbACCnED2K4KyKelq8OkoF5yuqNKZfUTmV/MiBqG2VAWpmqYByWdv99fIS8O y2N0qjoZQhzWzk05MJHEc/fiDhBq/AvyxPln8EaKKQRWOnfASSsodwdRrDJSDUh7TqPu hNwRxIRyjaC+cYHrGV9mbUGZq56uUw68Wt/S5HJNHa22VtSlD8kRF+reGhXO46GQN1c4 OVZWQXSd3WQs2fvL+4T5jFwEkBjEia2eS1l4xZ+JdfKAVPCwEItBbTaKq8XB22We0ZAi PklWnxy/CYH6NkMFv2A8LluckLcc9dl+S1S9VcbOOvBBTatNkaq+HshCBUy0bfsqMBx7 AE2w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=5qai7EVJW5hoLpnWtGDq8s8utyB9lJMw3xdEysxZYYg=; b=PI8eBEqeP11vR5zIPXQhxe9jUZ2IhCDdbCjBHrqDBUuK+k5QZgVqfEovl/Rom665T0 C+H4LQxWly0K3hej0265Wrh6KPJS1JdJQVMpXxesCUsFLxV1nEQyiKaCs7vI9K230qxM 53Pj1s59j4jwIjOkimoQZLrMQdHWIjjLz5PBetiq9TNDdLy0zmyx7E5OjXgw3F3ckq7p 986ftj7hpAoy9Ca+Xqp0ABqKGEKhOk9Az5p2vfzvgJsrHISTXphZP5i9dcBRpm0gAWIM /omwNmOgVfZDc1uIdfWj+b2yUcOGe5S2snK+CcEE3+X444rpBgTJUcaQ50DMRPZLrD1I A3GQ== X-Gm-Message-State: AJaThX5mkZp+89Fery3m9UXY8iN/nYo0RC9Nykt7JPD1CGKWvraGK3dS V/CGQ67FtTKbmDSAPsoIHQPWnbbZOtQ= X-Google-Smtp-Source: AGs4zMbrtq1Y/2u+tYb2xhgaz5DWavYF7ZIMadNOzW0zfAxBkGwq25jS2gt4uFb2d79PJ4WBdIwwrw== X-Received: by 10.25.171.2 with SMTP id u2mr4225432lfe.251.1511246825320; Mon, 20 Nov 2017 22:47:05 -0800 (PST) Received: from gilgamesh.semihalf.com (31-172-191-173.noc.fibertech.net.pl. [31.172.191.173]) by smtp.gmail.com with ESMTPSA id f79sm2267015lfk.57.2017.11.20.22.47.03 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 20 Nov 2017 22:47:04 -0800 (PST) From: Marcin Wojtas To: edk2-devel@lists.01.org Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org, nadavh@marvell.com, neta@marvell.com, kostap@marvell.com, jinghua@marvell.com, mw@semihalf.com, jsd@semihalf.com Date: Tue, 21 Nov 2017 07:46:18 +0100 Message-Id: <1511246781-7073-2-git-send-email-mw@semihalf.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1511246781-7073-1-git-send-email-mw@semihalf.com> References: <1511246781-7073-1-git-send-email-mw@semihalf.com> Subject: [platforms: PATCH v2 1/4] Platform/Marvell: Introduce MvFvbDxe variable support driver X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.22 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 21 Nov 2017 06:42:53 -0000 MvFvbDxe driver introduces non-volatile EFI variable support for Armada platforms. It relies on memory-mapped SPI read access. Implementation of EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL is done with using existing Marvell SPI infrastructure (SpiMasterProtocol and SpiFlashProtocol), thanks to which this driver will be able to support various combinations of flash devices and host controllers. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Marcin Wojtas --- Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.c | 1056 ++++++++++++++++++++ Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.h | 114 +++ Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.inf | 91 ++ Platform/Marvell/Marvell.dec | 1 + 4 files changed, 1262 insertions(+) diff --git a/Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.c b/Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.c new file mode 100644 index 0000000..7a44f80 --- /dev/null +++ b/Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.c @@ -0,0 +1,1056 @@ +/*++ @file MvFvbDxe.c + + Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.
+ Copyright (c) 2017 Marvell International Ltd.
+ + This program and the accompanying materials are licensed and made available + under the terms and conditions of the BSD License which accompanies this + distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + + --*/ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include "MvFvbDxe.h" + +STATIC EFI_EVENT mFvbVirtualAddrChangeEvent; +STATIC FVB_DEVICE *mFvbDevice; + +STATIC CONST FVB_DEVICE mMvFvbFlashInstanceTemplate = { + { + 0, // SpiFlash Chip Select ... NEED TO BE FILLED + 0, // SpiFlash Maximum Frequency ... NEED TO BE FILLED + 0, // SpiFlash Transfer Mode ... NEED TO BE FILLED + 0, // SpiFlash Address Size ... NEED TO BE FILLED + NULL, // SpiFlash detailed information ... NEED TO BE FILLED + 0, // HostRegisterBaseAddress ... NEED TO BE FILLED + 0, // CoreClock ... NEED TO BE FILLED + }, // SpiDevice + + NULL, // SpiFlashProtocol ... NEED TO BE FILLED + NULL, // SpiMasterProtocol ... NEED TO BE FILLED + NULL, // Handle ... NEED TO BE FILLED + + FVB_FLASH_SIGNATURE, // Signature + + 0, // DeviceBaseAddress ... NEED TO BE FILLED + 0, // RegionBaseAddress ... NEED TO BE FILLED + SIZE_256KB, // Size + 0, // FvbOffset ... NEED TO BE FILLED + 0, // FvbSize ... NEED TO BE FILLED + 0, // StartLba + + { + 0, // MediaId ... NEED TO BE FILLED + FALSE, // RemovableMedia + TRUE, // MediaPresent + FALSE, // LogicalPartition + FALSE, // ReadOnly + FALSE, // WriteCaching; + 0, // BlockSize ... NEED TO BE FILLED + 4, // IoAlign + 0, // LastBlock ... NEED TO BE FILLED + 0, // LowestAlignedLba + 1, // LogicalBlocksPerPhysicalBlock + }, //Media; + + { + MvFvbGetAttributes, // GetAttributes + MvFvbSetAttributes, // SetAttributes + MvFvbGetPhysicalAddress, // GetPhysicalAddress + MvFvbGetBlockSize, // GetBlockSize + MvFvbRead, // Read + MvFvbWrite, // Write + MvFvbEraseBlocks, // EraseBlocks + NULL, // ParentHandle + }, // FvbProtocol; + + { + { + { + HARDWARE_DEVICE_PATH, + HW_VENDOR_DP, + { + (UINT8)sizeof (VENDOR_DEVICE_PATH), + (UINT8)((sizeof (VENDOR_DEVICE_PATH)) >> 8) + } + }, + { 0xfc0cb972, 0x21df, 0x44d2, { 0x92, 0xa5, 0x78, 0x98, 0x99, 0xcb, 0xf6, 0x61 } } + }, + { + END_DEVICE_PATH_TYPE, + END_ENTIRE_DEVICE_PATH_SUBTYPE, + { sizeof (EFI_DEVICE_PATH_PROTOCOL), 0 } + } + } // DevicePath +}; + +// +// The Firmware Volume Block Protocol is the low-level interface +// to a firmware volume. File-level access to a firmware volume +// should not be done using the Firmware Volume Block Protocol. +// Normal access to a firmware volume must use the Firmware +// Volume Protocol. Typically, only the file system driver that +// produces the Firmware Volume Protocol will bind to the +// Firmware Volume Block Protocol. +// + +/** + Initialises the FV Header and Variable Store Header + to support variable operations. + + @param[in] Ptr - Location to initialise the headers + +**/ +STATIC +EFI_STATUS +MvFvbInitFvAndVariableStoreHeaders ( + IN FVB_DEVICE *FlashInstance + ) +{ + EFI_FIRMWARE_VOLUME_HEADER *FirmwareVolumeHeader; + VARIABLE_STORE_HEADER *VariableStoreHeader; + EFI_STATUS Status; + VOID* Headers; + UINTN HeadersLength; + UINTN BlockSize; + + HeadersLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + + sizeof (EFI_FV_BLOCK_MAP_ENTRY) + + sizeof (VARIABLE_STORE_HEADER); + Headers = AllocateZeroPool (HeadersLength); + + BlockSize = FlashInstance->Media.BlockSize; + + // + // FirmwareVolumeHeader->FvLength is declared to have the Variable area + // AND the FTW working area AND the FTW Spare contiguous. + // + ASSERT (PcdGet32 (PcdFlashNvStorageVariableBase) + + PcdGet32 (PcdFlashNvStorageVariableSize) == + PcdGet32 (PcdFlashNvStorageFtwWorkingBase)); + ASSERT (PcdGet32 (PcdFlashNvStorageFtwWorkingBase) + + PcdGet32 (PcdFlashNvStorageFtwWorkingSize) == + PcdGet32 (PcdFlashNvStorageFtwSpareBase)); + + // Check if the size of the area is at least one block size + ASSERT ((PcdGet32 (PcdFlashNvStorageVariableSize) > 0) && + (PcdGet32 (PcdFlashNvStorageVariableSize) / BlockSize > 0)); + ASSERT ((PcdGet32 (PcdFlashNvStorageFtwWorkingSize) > 0) && + (PcdGet32 (PcdFlashNvStorageFtwWorkingSize) / BlockSize > 0)); + ASSERT ((PcdGet32 (PcdFlashNvStorageFtwSpareSize) > 0) && + (PcdGet32 (PcdFlashNvStorageFtwSpareSize) / BlockSize > 0)); + + // Ensure the Variable areas are aligned on block size boundaries + ASSERT ((PcdGet32 (PcdFlashNvStorageVariableBase) % BlockSize) == 0); + ASSERT ((PcdGet32 (PcdFlashNvStorageFtwWorkingBase) % BlockSize) == 0); + ASSERT ((PcdGet32 (PcdFlashNvStorageFtwSpareBase) % BlockSize) == 0); + + // + // EFI_FIRMWARE_VOLUME_HEADER + // + FirmwareVolumeHeader = (EFI_FIRMWARE_VOLUME_HEADER*)Headers; + CopyGuid (&FirmwareVolumeHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid); + FirmwareVolumeHeader->FvLength = FlashInstance->FvbSize; + FirmwareVolumeHeader->Signature = EFI_FVH_SIGNATURE; + FirmwareVolumeHeader->Attributes = EFI_FVB2_READ_ENABLED_CAP | + EFI_FVB2_READ_STATUS | + EFI_FVB2_STICKY_WRITE | + EFI_FVB2_MEMORY_MAPPED | + EFI_FVB2_ERASE_POLARITY | + EFI_FVB2_WRITE_STATUS | + EFI_FVB2_WRITE_ENABLED_CAP; + + FirmwareVolumeHeader->HeaderLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) + + sizeof (EFI_FV_BLOCK_MAP_ENTRY); + FirmwareVolumeHeader->Revision = EFI_FVH_REVISION; + FirmwareVolumeHeader->BlockMap[0].NumBlocks = FlashInstance->Media.LastBlock + 1; + FirmwareVolumeHeader->BlockMap[0].Length = FlashInstance->Media.BlockSize; + FirmwareVolumeHeader->BlockMap[1].NumBlocks = 0; + FirmwareVolumeHeader->BlockMap[1].Length = 0; + FirmwareVolumeHeader->Checksum = CalculateCheckSum16 ( + (UINT16 *)FirmwareVolumeHeader, + FirmwareVolumeHeader->HeaderLength); + + // + // VARIABLE_STORE_HEADER + // + VariableStoreHeader = (VOID *)((UINTN)Headers + + FirmwareVolumeHeader->HeaderLength); + CopyGuid (&VariableStoreHeader->Signature, &gEfiAuthenticatedVariableGuid); + VariableStoreHeader->Size = PcdGet32(PcdFlashNvStorageVariableSize) - + FirmwareVolumeHeader->HeaderLength; + VariableStoreHeader->Format = VARIABLE_STORE_FORMATTED; + VariableStoreHeader->State = VARIABLE_STORE_HEALTHY; + + // Install the combined super-header in the flash device + Status = MvFvbWrite (&FlashInstance->FvbProtocol, 0, 0, &HeadersLength, Headers); + + FreePool (Headers); + + return Status; +} + +/** + Check the integrity of firmware volume header. + + @param[in] FwVolHeader - A pointer to a firmware volume header + + @retval EFI_SUCCESS - The firmware volume is consistent + @retval EFI_NOT_FOUND - The firmware volume has been corrupted. + +**/ +STATIC +EFI_STATUS +MvFvbValidateFvHeader ( + IN FVB_DEVICE *FlashInstance + ) +{ + UINT16 Checksum; + EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader; + VARIABLE_STORE_HEADER *VariableStoreHeader; + UINTN VariableStoreLength; + + FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)FlashInstance->RegionBaseAddress; + + // Verify the header revision, header signature, length + if ((FwVolHeader->Revision != EFI_FVH_REVISION) || + (FwVolHeader->Signature != EFI_FVH_SIGNATURE) || + (FwVolHeader->FvLength != FlashInstance->FvbSize)) { + DEBUG ((DEBUG_ERROR, + "%a: No Firmware Volume header present\n", + __FUNCTION__)); + return EFI_NOT_FOUND; + } + + // Check the Firmware Volume Guid + if (!CompareGuid (&FwVolHeader->FileSystemGuid, &gEfiSystemNvDataFvGuid)) { + DEBUG ((DEBUG_ERROR, + "%a: Firmware Volume Guid non-compatible\n", + __FUNCTION__)); + return EFI_NOT_FOUND; + } + + // Verify the header checksum + Checksum = CalculateSum16 ((UINT16 *)FwVolHeader, FwVolHeader->HeaderLength); + if (Checksum != 0) { + DEBUG ((DEBUG_ERROR, + "%a: FV checksum is invalid (Checksum:0x%x)\n", + __FUNCTION__, + Checksum)); + return EFI_NOT_FOUND; + } + + VariableStoreHeader = (VOID *)((UINTN)FwVolHeader + FwVolHeader->HeaderLength); + + // Check the Variable Store Guid + if (!CompareGuid (&VariableStoreHeader->Signature, &gEfiVariableGuid) && + !CompareGuid (&VariableStoreHeader->Signature, + &gEfiAuthenticatedVariableGuid)) { + DEBUG ((DEBUG_ERROR, + "%a: Variable Store Guid non-compatible\n", + __FUNCTION__)); + return EFI_NOT_FOUND; + } + + VariableStoreLength = PcdGet32 (PcdFlashNvStorageVariableSize) - + FwVolHeader->HeaderLength; + if (VariableStoreHeader->Size != VariableStoreLength) { + DEBUG ((DEBUG_ERROR, + "%a: Variable Store Length does not match\n", + __FUNCTION__)); + return EFI_NOT_FOUND; + } + + return EFI_SUCCESS; +} + +/** + The GetAttributes() function retrieves the attributes and + current settings of the block. + + @param This Indicates the EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance. + + @param Attributes Pointer to EFI_FVB_ATTRIBUTES_2 in which the attributes and + current settings are returned. + Type EFI_FVB_ATTRIBUTES_2 is defined in + EFI_FIRMWARE_VOLUME_HEADER. + + @retval EFI_SUCCESS The firmware volume attributes were returned. + + **/ +EFI_STATUS +EFIAPI +MvFvbGetAttributes ( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This, + OUT EFI_FVB_ATTRIBUTES_2 *Attributes + ) +{ + EFI_FVB_ATTRIBUTES_2 FlashFvbAttributes; + FVB_DEVICE *FlashInstance; + + FlashInstance = INSTANCE_FROM_FVB_THIS (This); + + FlashFvbAttributes = EFI_FVB2_READ_ENABLED_CAP | EFI_FVB2_READ_STATUS | + EFI_FVB2_STICKY_WRITE | EFI_FVB2_MEMORY_MAPPED | + EFI_FVB2_ERASE_POLARITY; + + // Check if it is write protected + if (!FlashInstance->Media.ReadOnly) { + FlashFvbAttributes |= EFI_FVB2_WRITE_STATUS | EFI_FVB2_WRITE_ENABLED_CAP; + } + + *Attributes = FlashFvbAttributes; + + return EFI_SUCCESS; +} + +/** + The SetAttributes() function sets configurable firmware volume attributes + and returns the new settings of the firmware volume. + + + @param This EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance. + + @param Attributes On input, Attributes is a pointer to + EFI_FVB_ATTRIBUTES_2 that contains the desired + firmware volume settings. + On successful return, it contains the new + settings of the firmware volume. + + @retval EFI_SUCCESS The firmware volume attributes were returned. + + @retval EFI_INVALID_PARAMETER The attributes requested are in conflict with + the capabilities as declared in the firmware + volume header. + + **/ +EFI_STATUS +EFIAPI +MvFvbSetAttributes ( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This, + IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes + ) +{ + DEBUG ((DEBUG_BLKIO, + "%a: Operation not supported, keep default set of attributes\n", + __FUNCTION__)); + + return MvFvbGetAttributes (This, Attributes); +} + +/** + The GetPhysicalAddress() function retrieves the base address of + a memory-mapped firmware volume. This function should be called + only for memory-mapped firmware volumes. + + @param This EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance. + + @param Address Pointer to a caller-allocated + EFI_PHYSICAL_ADDRESS that, on successful + return from GetPhysicalAddress(), contains the + base address of the firmware volume. + + @retval EFI_SUCCESS The firmware volume base address was returned. + + @retval EFI_NOT_SUPPORTED The firmware volume is not memory mapped. + + **/ +EFI_STATUS +EFIAPI +MvFvbGetPhysicalAddress ( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This, + OUT EFI_PHYSICAL_ADDRESS *Address + ) +{ + FVB_DEVICE *FlashInstance; + + ASSERT (Address != NULL); + + FlashInstance = INSTANCE_FROM_FVB_THIS (This); + + *Address = FlashInstance->RegionBaseAddress; + + return EFI_SUCCESS; +} + +/** + The GetBlockSize() function retrieves the size of the requested + block. It also returns the number of additional blocks with + the identical size. The GetBlockSize() function is used to + retrieve the block map (see EFI_FIRMWARE_VOLUME_HEADER). + + + @param This EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance. + + @param Lba Indicates the block whose size to return + + @param BlockSize Pointer to a caller-allocated UINTN in which + the size of the block is returned. + + @param NumberOfBlocks Pointer to a caller-allocated UINTN in + which the number of consecutive blocks, + starting with Lba, is returned. All + blocks in this range have a size of + BlockSize. + + + @retval EFI_SUCCESS The firmware volume base address was returned. + + @retval EFI_INVALID_PARAMETER The requested LBA is out of range. + + **/ +EFI_STATUS +EFIAPI +MvFvbGetBlockSize ( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This, + IN EFI_LBA Lba, + OUT UINTN *BlockSize, + OUT UINTN *NumberOfBlocks + ) +{ + FVB_DEVICE *FlashInstance; + + FlashInstance = INSTANCE_FROM_FVB_THIS (This); + + if (Lba > FlashInstance->Media.LastBlock) { + DEBUG ((DEBUG_ERROR, + "%a: Error: Requested LBA %ld is beyond the last available LBA (%ld).\n", + __FUNCTION__, + Lba, + FlashInstance->Media.LastBlock)); + return EFI_INVALID_PARAMETER; + } else { + // Assume equal sized blocks in all flash devices + *BlockSize = (UINTN)FlashInstance->Media.BlockSize; + *NumberOfBlocks = (UINTN)(FlashInstance->Media.LastBlock - Lba + 1); + + return EFI_SUCCESS; + } +} + +/** + Reads the specified number of bytes into a buffer from the specified block. + + The Read() function reads the requested number of bytes from the + requested block and stores them in the provided buffer. + Implementations should be mindful that the firmware volume + might be in the ReadDisabled state. If it is in this state, + the Read() function must return the status code + EFI_ACCESS_DENIED without modifying the contents of the + buffer. The Read() function must also prevent spanning block + boundaries. If a read is requested that would span a block + boundary, the read must read up to the boundary but not + beyond. The output parameter NumBytes must be set to correctly + indicate the number of bytes actually read. The caller must be + aware that a read may be partially completed. + + @param This EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance. + + @param Lba The starting logical block index from which to read + + @param Offset Offset into the block at which to begin reading. + + @param NumBytes Pointer to a UINTN. + At entry, *NumBytes contains the total size of the + buffer. + At exit, *NumBytes contains the total number of + bytes read. + + @param Buffer Pointer to a caller-allocated buffer that will be + used to hold the data that is read. + + @retval EFI_SUCCESS The firmware volume was read successfully, and + contents are in Buffer. + + @retval EFI_BAD_BUFFER_SIZE Read attempted across an LBA boundary. + On output, NumBytes contains the total number of + bytes returned in Buffer. + + @retval EFI_ACCESS_DENIED The firmware volume is in the ReadDisabled state. + + @retval EFI_DEVICE_ERROR The block device is not functioning correctly and + could not be read. + + **/ +EFI_STATUS +EFIAPI +MvFvbRead ( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This, + IN EFI_LBA Lba, + IN UINTN Offset, + IN OUT UINTN *NumBytes, + IN OUT UINT8 *Buffer + ) +{ + FVB_DEVICE *FlashInstance; + UINTN BlockSize; + UINTN DataOffset; + + FlashInstance = INSTANCE_FROM_FVB_THIS (This); + + + // Cache the block size to avoid de-referencing pointers all the time + BlockSize = FlashInstance->Media.BlockSize; + + // + // The read must not span block boundaries. + // We need to check each variable individually because adding two large + // values together overflows. + // + if (Offset >= BlockSize || + *NumBytes > BlockSize || + (Offset + *NumBytes) > BlockSize) { + DEBUG ((DEBUG_ERROR, + "%a: Wrong buffer size: (Offset=0x%x + NumBytes=0x%x) > BlockSize=0x%x\n", + __FUNCTION__, + Offset, + *NumBytes, + BlockSize)); + return EFI_BAD_BUFFER_SIZE; + } + + // No bytes to read + if (*NumBytes == 0) { + return EFI_SUCCESS; + } + + DataOffset = GET_DATA_OFFSET (FlashInstance->RegionBaseAddress + Offset, + FlashInstance->StartLba + Lba, + FlashInstance->Media.BlockSize); + + // Read the memory-mapped data + CopyMem (Buffer, (UINTN *)DataOffset, *NumBytes); + + return EFI_SUCCESS; +} + +/** + Writes the specified number of bytes from the input buffer to the block. + + The Write() function writes the specified number of bytes from + the provided buffer to the specified block and offset. If the + firmware volume is sticky write, the caller must ensure that + all the bits of the specified range to write are in the + EFI_FVB_ERASE_POLARITY state before calling the Write() + function, or else the result will be unpredictable. This + unpredictability arises because, for a sticky-write firmware + volume, a write may negate a bit in the EFI_FVB_ERASE_POLARITY + state but cannot flip it back again. Before calling the + Write() function, it is recommended for the caller to first call + the EraseBlocks() function to erase the specified block to + write. A block erase cycle will transition bits from the + (NOT)EFI_FVB_ERASE_POLARITY state back to the + EFI_FVB_ERASE_POLARITY state. Implementations should be + mindful that the firmware volume might be in the WriteDisabled + state. If it is in this state, the Write() function must + return the status code EFI_ACCESS_DENIED without modifying the + contents of the firmware volume. The Write() function must + also prevent spanning block boundaries. If a write is + requested that spans a block boundary, the write must store up + to the boundary but not beyond. The output parameter NumBytes + must be set to correctly indicate the number of bytes actually + written. The caller must be aware that a write may be + partially completed. All writes, partial or otherwise, must be + fully flushed to the hardware before the Write() service + returns. + + @param This EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL instance. + + @param Lba The starting logical block index to write to. + + @param Offset Offset into the block at which to begin writing. + + @param NumBytes The pointer to a UINTN. + At entry, *NumBytes contains the total size of the + buffer. + At exit, *NumBytes contains the total number of + bytes actually written. + + @param Buffer The pointer to a caller-allocated buffer that + contains the source for the write. + + @retval EFI_SUCCESS The firmware volume was written successfully. + + @retval EFI_BAD_BUFFER_SIZE The write was attempted across an LBA boundary. + On output, NumBytes contains the total number of + bytes actually written. + + @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state. + + @retval EFI_DEVICE_ERROR The block device is malfunctioning and could not be + written. + + + **/ +EFI_STATUS +EFIAPI +MvFvbWrite ( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This, + IN EFI_LBA Lba, + IN UINTN Offset, + IN OUT UINTN *NumBytes, + IN UINT8 *Buffer + ) +{ + FVB_DEVICE *FlashInstance; + UINTN DataOffset; + + FlashInstance = INSTANCE_FROM_FVB_THIS (This); + + DataOffset = GET_DATA_OFFSET (FlashInstance->FvbOffset + Offset, + FlashInstance->StartLba + Lba, + FlashInstance->Media.BlockSize); + + return FlashInstance->SpiFlashProtocol->Write (&FlashInstance->SpiDevice, + DataOffset, + *NumBytes, + Buffer); +} + +/** + Erases and initialises a firmware volume block. + + The EraseBlocks() function erases one or more blocks as denoted + by the variable argument list. The entire parameter list of + blocks must be verified before erasing any blocks. If a block is + requested that does not exist within the associated firmware + volume (it has a larger index than the last block of the + firmware volume), the EraseBlocks() function must return the + status code EFI_INVALID_PARAMETER without modifying the contents + of the firmware volume. Implementations should be mindful that + the firmware volume might be in the WriteDisabled state. If it + is in this state, the EraseBlocks() function must return the + status code EFI_ACCESS_DENIED without modifying the contents of + the firmware volume. All calls to EraseBlocks() must be fully + flushed to the hardware before the EraseBlocks() service + returns. + + @param This EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL + instance. + + @param ... The variable argument list is a list of tuples. + Each tuple describes a range of LBAs to erase + and consists of the following: + - An EFI_LBA that indicates the starting LBA + - A UINTN that indicates the number of blocks + to erase. + + The list is terminated with an + EFI_LBA_LIST_TERMINATOR. + + @retval EFI_SUCCESS The erase request successfully completed. + + @retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled + state. + + @retval EFI_DEVICE_ERROR The block device is not functioning correctly + and could not be written. + The firmware device may have been partially + erased. + + @retval EFI_INVALID_PARAMETER One or more of the LBAs listed in the variable + argument list do not exist in the firmware + volume. + + **/ +EFI_STATUS +EFIAPI +MvFvbEraseBlocks ( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL *This, + ... + ) +{ + EFI_STATUS Status; + VA_LIST Args; + UINTN BlockAddress; // Physical address of Lba to erase + EFI_LBA StartingLba; // Lba from which we start erasing + UINTN NumOfLba; // Number of Lba blocks to erase + FVB_DEVICE *FlashInstance; + + FlashInstance = INSTANCE_FROM_FVB_THIS (This); + + Status = EFI_SUCCESS; + + // Detect WriteDisabled state + if (FlashInstance->Media.ReadOnly) { + DEBUG ((DEBUG_ERROR, + "%a: Device is in WriteDisabled state.\n", + __FUNCTION__)); + return EFI_ACCESS_DENIED; + } + + // + // Before erasing, check the entire list of parameters to ensure + // all specified blocks are valid. + // + VA_START (Args, This); + do { + // Get the Lba from which we start erasing + StartingLba = VA_ARG (Args, EFI_LBA); + + // Have we reached the end of the list? + if (StartingLba == EFI_LBA_LIST_TERMINATOR) { + //Exit the while loop + break; + } + + // How many Lba blocks are we requested to erase? + NumOfLba = VA_ARG (Args, UINT32); + + // All blocks must be within range + if (NumOfLba == 0 || + (FlashInstance->StartLba + StartingLba + NumOfLba - 1) > + FlashInstance->Media.LastBlock) { + + DEBUG ((DEBUG_ERROR, + "%a: Error: Requested LBA are beyond the last available LBA (%ld).\n", + __FUNCTION__, + FlashInstance->Media.LastBlock)); + + VA_END (Args); + + return EFI_INVALID_PARAMETER; + } + } while (TRUE); + VA_END (Args); + + // + // Start erasing + // + VA_START (Args, This); + do { + // Get the Lba from which we start erasing + StartingLba = VA_ARG (Args, EFI_LBA); + + // Have we reached the end of the list? + if (StartingLba == EFI_LBA_LIST_TERMINATOR) { + // Exit the while loop + break; + } + + // How many Lba blocks are we requested to erase? + NumOfLba = VA_ARG (Args, UINT32); + + // Go through each one and erase it + while (NumOfLba > 0) { + + // Get the physical address of Lba to erase + BlockAddress = GET_DATA_OFFSET (FlashInstance->FvbOffset, + FlashInstance->StartLba + StartingLba, + FlashInstance->Media.BlockSize); + + // Erase single block + Status = FlashInstance->SpiFlashProtocol->Erase (&FlashInstance->SpiDevice, + BlockAddress, + FlashInstance->Media.BlockSize); + if (EFI_ERROR (Status)) { + VA_END (Args); + return EFI_DEVICE_ERROR; + } + + // Move to the next Lba + StartingLba++; + NumOfLba--; + } + } while (TRUE); + VA_END (Args); + + return EFI_SUCCESS; +} + +/** + Fixup internal data so that EFI can be call in virtual mode. + Call the passed in Child Notify event and convert any pointers in + lib to virtual mode. + + @param[in] Event The Event that is being processed + @param[in] Context Event Context +**/ +STATIC +VOID +EFIAPI +MvFvbVirtualNotifyEvent ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + // Convert SPI memory mapped region + EfiConvertPointer (0x0, (VOID**)&mFvbDevice->RegionBaseAddress); + + // Convert SPI device description + EfiConvertPointer (0x0, (VOID**)&mFvbDevice->SpiDevice.Info); + EfiConvertPointer (0x0, (VOID**)&mFvbDevice->SpiDevice.HostRegisterBaseAddress); + EfiConvertPointer (0x0, (VOID**)&mFvbDevice->SpiDevice); + + // Convert SpiFlashProtocol + EfiConvertPointer (0x0, (VOID**)&mFvbDevice->SpiFlashProtocol->Erase); + EfiConvertPointer (0x0, (VOID**)&mFvbDevice->SpiFlashProtocol->Write); + EfiConvertPointer (0x0, (VOID**)&mFvbDevice->SpiFlashProtocol); + + return; +} + +STATIC +EFI_STATUS +MvFvbFlashProbe ( + IN FVB_DEVICE *FlashInstance + ) +{ + MARVELL_SPI_FLASH_PROTOCOL *SpiFlashProtocol; + EFI_STATUS Status; + + SpiFlashProtocol = FlashInstance->SpiFlashProtocol; + + // Read SPI flash ID + Status = SpiFlashProtocol->ReadId (&FlashInstance->SpiDevice, TRUE); + if (EFI_ERROR (Status)) { + return EFI_NOT_FOUND; + } + + Status = SpiFlashProtocol->Init (SpiFlashProtocol, &FlashInstance->SpiDevice); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Cannot initialize flash device\n", __FUNCTION__)); + return EFI_DEVICE_ERROR; + } + + // + // SPI flash may require 20ms interval between enabling it and + // accessing in Direct Mode to its memory mapped content. + // + gBS->Stall (20000); + + return EFI_SUCCESS; +} + +STATIC +EFI_STATUS +MvFvbPrepareFvHeader ( + IN FVB_DEVICE *FlashInstance + ) +{ + EFI_BOOT_MODE BootMode; + EFI_STATUS Status; + + // Check if it is required to use default environment + BootMode = GetBootModeHob (); + if (BootMode == BOOT_WITH_DEFAULT_SETTINGS) { + Status = EFI_INVALID_PARAMETER; + } else { + // Validate header at the beginning of FV region + Status = MvFvbValidateFvHeader (FlashInstance); + } + + // Install the default FVB header if required + if (EFI_ERROR (Status)) { + // There is no valid header, so time to install one. + DEBUG ((DEBUG_ERROR, "%a: The FVB Header is not valid.\n", __FUNCTION__)); + DEBUG ((DEBUG_ERROR, + "%a: Installing a correct one for this volume.\n", + __FUNCTION__)); + + // Erase entire region that is reserved for variable storage + Status = FlashInstance->SpiFlashProtocol->Erase (&FlashInstance->SpiDevice, + FlashInstance->FvbOffset, + FlashInstance->FvbSize); + if (EFI_ERROR (Status)) { + return Status; + } + + // Install all appropriate headers + Status = MvFvbInitFvAndVariableStoreHeaders (FlashInstance); + if (EFI_ERROR (Status)) { + return Status; + } + } + + return EFI_SUCCESS; +} + +STATIC +EFI_STATUS +MvFvbConfigureFlashInstance ( + IN OUT FVB_DEVICE *FlashInstance + ) +{ + EFI_STATUS Status; + + + // Locate SPI protocols + Status = gBS->LocateProtocol (&gMarvellSpiFlashProtocolGuid, + NULL, + (VOID **)&FlashInstance->SpiFlashProtocol); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Cannot locate SpiFlash protocol\n", __FUNCTION__)); + return Status; + } + + Status = gBS->LocateProtocol (&gMarvellSpiMasterProtocolGuid, + NULL, + (VOID **)&FlashInstance->SpiMasterProtocol); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Cannot locate SpiMaster protocol\n", __FUNCTION__)); + return Status; + } + + // Setup and probe SPI flash + FlashInstance->SpiMasterProtocol->SetupDevice (FlashInstance->SpiMasterProtocol, + &FlashInstance->SpiDevice, + 0, + 0); + + Status = MvFvbFlashProbe (FlashInstance); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, + "%a: Error while performing SPI flash probe\n", + __FUNCTION__)); + return Status; + } + + // Fill remaining flash description + FlashInstance->DeviceBaseAddress = PcdGet32 (PcdSpiMemoryBase); + FlashInstance->RegionBaseAddress = FixedPcdGet32 (PcdFlashNvStorageVariableBase); + FlashInstance->FvbOffset = FlashInstance->RegionBaseAddress - + FlashInstance->DeviceBaseAddress; + FlashInstance->FvbSize = PcdGet32(PcdFlashNvStorageVariableSize) + + PcdGet32(PcdFlashNvStorageFtwWorkingSize) + + PcdGet32(PcdFlashNvStorageFtwSpareSize); + + FlashInstance->Media.MediaId = 0; + FlashInstance->Media.BlockSize = FlashInstance->SpiDevice.Info->SectorSize; + FlashInstance->Media.LastBlock = FlashInstance->Size / + FlashInstance->Media.BlockSize - 1; + + Status = gBS->InstallMultipleProtocolInterfaces (&FlashInstance->Handle, + &gEfiDevicePathProtocolGuid, &FlashInstance->DevicePath, + &gEfiFirmwareVolumeBlockProtocolGuid, &FlashInstance->FvbProtocol, + NULL); + if (EFI_ERROR (Status)) { + return Status; + } + + Status = MvFvbPrepareFvHeader (FlashInstance); + if (EFI_ERROR (Status)) { + goto ErrorPrepareFvbHeader; + } + + return EFI_SUCCESS; + +ErrorPrepareFvbHeader: + gBS->UninstallMultipleProtocolInterfaces (&FlashInstance->Handle, + &gEfiDevicePathProtocolGuid, + &gEfiFirmwareVolumeBlockProtocolGuid, + NULL); + + return Status; +} + +EFI_STATUS +EFIAPI +MvFvbEntryPoint ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + UINTN RuntimeMmioRegionSize; + UINTN RegionBaseAddress; + + // + // Create FVB flash device + // + mFvbDevice = AllocateRuntimeCopyPool (sizeof (mMvFvbFlashInstanceTemplate), + &mMvFvbFlashInstanceTemplate); + if (mFvbDevice == NULL) { + DEBUG ((DEBUG_ERROR, "%a: Cannot allocate memory\n", __FUNCTION__)); + return EFI_OUT_OF_RESOURCES; + } + + // + // Detect and configure flash device + // + Status = MvFvbConfigureFlashInstance (mFvbDevice); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Fail to configure Fvb SPI device\n", __FUNCTION__)); + goto ErrorConfigureFlash; + } + + // + // Declare the Non-Volatile storage as EFI_MEMORY_RUNTIME + // + RuntimeMmioRegionSize = mFvbDevice->FvbSize; + RegionBaseAddress = mFvbDevice->RegionBaseAddress; + + Status = gDS->AddMemorySpace (EfiGcdMemoryTypeMemoryMappedIo, + RegionBaseAddress, + RuntimeMmioRegionSize, + EFI_MEMORY_UC | EFI_MEMORY_RUNTIME); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Failed to add memory space\n", __FUNCTION__)); + goto ErrorAddSpace; + } + + Status = gDS->SetMemorySpaceAttributes (RegionBaseAddress, + RuntimeMmioRegionSize, + EFI_MEMORY_UC | EFI_MEMORY_RUNTIME); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Failed to set memory attributes\n", __FUNCTION__)); + goto ErrorSetMemAttr; + } + + // + // Register for the virtual address change event + // + Status = gBS->CreateEventEx (EVT_NOTIFY_SIGNAL, + TPL_NOTIFY, + MvFvbVirtualNotifyEvent, + NULL, + &gEfiEventVirtualAddressChangeGuid, + &mFvbVirtualAddrChangeEvent); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "%a: Failed to register VA change event\n", __FUNCTION__)); + goto ErrorSetMemAttr; + } + + // + // Configure runtime access to host controller registers + // + Status = mFvbDevice->SpiMasterProtocol->ConfigRuntime (&mFvbDevice->SpiDevice); + if (EFI_ERROR (Status)) { + goto ErrorSetMemAttr; + } + + return Status; + +ErrorSetMemAttr: + gDS->RemoveMemorySpace (RegionBaseAddress, RuntimeMmioRegionSize); + +ErrorAddSpace: + gBS->UninstallMultipleProtocolInterfaces (&mFvbDevice->Handle, + &gEfiDevicePathProtocolGuid, + &gEfiFirmwareVolumeBlockProtocolGuid, + NULL); + +ErrorConfigureFlash: + FreePool (mFvbDevice); + + return Status; +} diff --git a/Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.h b/Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.h new file mode 100644 index 0000000..6082d0a --- /dev/null +++ b/Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.h @@ -0,0 +1,114 @@ +/** @file MvFvbDxe.h + + Copyright (c) 2011 - 2014, ARM Ltd. All rights reserved.
+ Copyright (c) 2017 Marvell International Ltd.
+ + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef __FVB_FLASH_DXE_H__ +#define __FVB_FLASH_DXE_H__ + +#include +#include +#include +#include + +#define GET_DATA_OFFSET(BaseAddr, Lba, LbaSize) ((BaseAddr) + (UINTN)((Lba) * (LbaSize))) + +#define FVB_FLASH_SIGNATURE SIGNATURE_32('S', 'n', 'o', 'r') +#define INSTANCE_FROM_FVB_THIS(a) CR(a, FVB_DEVICE, FvbProtocol, FVB_FLASH_SIGNATURE) + +typedef struct { + VENDOR_DEVICE_PATH Vendor; + EFI_DEVICE_PATH_PROTOCOL End; +} FVB_DEVICE_PATH; + +typedef struct { + SPI_DEVICE SpiDevice; + + MARVELL_SPI_FLASH_PROTOCOL *SpiFlashProtocol; + MARVELL_SPI_MASTER_PROTOCOL *SpiMasterProtocol; + + EFI_HANDLE Handle; + + UINT32 Signature; + + UINTN DeviceBaseAddress; + UINTN RegionBaseAddress; + UINTN Size; + UINTN FvbOffset; + UINTN FvbSize; + EFI_LBA StartLba; + + EFI_BLOCK_IO_MEDIA Media; + EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL FvbProtocol; + + FVB_DEVICE_PATH DevicePath; +} FVB_DEVICE; + +EFI_STATUS +EFIAPI +MvFvbGetAttributes( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL* This, + OUT EFI_FVB_ATTRIBUTES_2* Attributes +); + +EFI_STATUS +EFIAPI +MvFvbSetAttributes( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL* This, + IN OUT EFI_FVB_ATTRIBUTES_2* Attributes +); + +EFI_STATUS +EFIAPI +MvFvbGetPhysicalAddress( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL* This, + OUT EFI_PHYSICAL_ADDRESS* Address +); + +EFI_STATUS +EFIAPI +MvFvbGetBlockSize( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL* This, + IN EFI_LBA Lba, + OUT UINTN* BlockSize, + OUT UINTN* NumberOfBlocks +); + +EFI_STATUS +EFIAPI +MvFvbRead( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL* This, + IN EFI_LBA Lba, + IN UINTN Offset, + IN OUT UINTN* NumBytes, + IN OUT UINT8* Buffer +); + +EFI_STATUS +EFIAPI +MvFvbWrite( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL* This, + IN EFI_LBA Lba, + IN UINTN Offset, + IN OUT UINTN* NumBytes, + IN UINT8* Buffer +); + +EFI_STATUS +EFIAPI +MvFvbEraseBlocks( + IN CONST EFI_FIRMWARE_VOLUME_BLOCK2_PROTOCOL* This, + ... +); + +#endif /* __FVB_FLASH_DXE_H__ */ diff --git a/Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.inf b/Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.inf new file mode 100644 index 0000000..5d73c21 --- /dev/null +++ b/Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.inf @@ -0,0 +1,91 @@ +# +# Marvell BSD License Option +# +# If you received this File from Marvell, you may opt to use, redistribute +# and/or modify this File under the following licensing terms. +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# +# * Redistributions of source code must retain the above copyright notice, +# this list of conditions and the following disclaimer. +# +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# +# * Neither the name of Marvell nor the names of its contributors may be +# used to endorse or promote products derived from this software without +# specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE +# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +[Defines] + INF_VERSION = 0x0001001A + BASE_NAME = MvFvbDxe + FILE_GUID = 42903750-7e61-4aaf-8329-bf42364e2485 + MODULE_TYPE = DXE_RUNTIME_DRIVER + VERSION_STRING = 0.1 + ENTRY_POINT = MvFvbEntryPoint + +[Sources] + MvFvbDxe.c + +[Packages] + ArmPlatformPkg/ArmPlatformPkg.dec + EmbeddedPkg/EmbeddedPkg.dec + MdeModulePkg/MdeModulePkg.dec + MdePkg/MdePkg.dec + Platform/Marvell/Marvell.dec + +[LibraryClasses] + BaseLib + BaseMemoryLib + DebugLib + DevicePathLib + DxeServicesTableLib + HobLib + IoLib + MemoryAllocationLib + UefiBootServicesTableLib + UefiDriverEntryPoint + UefiLib + UefiRuntimeLib + UefiRuntimeServicesTableLib + +[Guids] + gEfiAuthenticatedVariableGuid + gEfiEventVirtualAddressChangeGuid + gEfiSystemNvDataFvGuid + gEfiVariableGuid + +[Protocols] + gEfiDevicePathProtocolGuid + gEfiFirmwareVolumeBlockProtocolGuid + gMarvellSpiFlashProtocolGuid + gMarvellSpiMasterProtocolGuid + +[FixedPcd] + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase + gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize + gMarvellTokenSpaceGuid.PcdSpiMemoryBase + +[Depex] + # + # MvFvbDxe must be loaded before VariableRuntimeDxe in case empty + # flash needs populating with default values. + # + BEFORE gVariableRuntimeDxeFileGuid diff --git a/Platform/Marvell/Marvell.dec b/Platform/Marvell/Marvell.dec index 8255895..6aa2a8d 100644 --- a/Platform/Marvell/Marvell.dec +++ b/Platform/Marvell/Marvell.dec @@ -125,6 +125,7 @@ #SPI gMarvellTokenSpaceGuid.PcdSpiRegBase|0|UINT32|0x3000051 + gMarvellTokenSpaceGuid.PcdSpiMemoryBase|0|UINT32|0x3000059 gMarvellTokenSpaceGuid.PcdSpiMaxFrequency|0|UINT32|0x30000052 gMarvellTokenSpaceGuid.PcdSpiClockFrequency|0|UINT32|0x30000053 -- 2.7.4