From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
To: <ard.biesheuvel@linaro.org>, <leif.lindholm@linaro.org>,
<michael.d.kinney@intel.com>, <edk2-devel@lists.01.org>
Subject: [PATCH v2 6/9] Silicon/Maxim : Add support for DS1307 RTC library
Date: Wed, 22 Nov 2017 21:18:57 +0530 [thread overview]
Message-ID: <1511365740-1157-6-git-send-email-meenakshi.aggarwal@nxp.com> (raw)
In-Reply-To: <1511365740-1157-1-git-send-email-meenakshi.aggarwal@nxp.com>
Real time clock Apis on top of I2C Apis
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
---
Silicon/Maxim/Library/Ds1307RtcLib/Ds1307Rtc.h | 59 ++++
Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c | 327 +++++++++++++++++++++
.../Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.dec | 26 ++
.../Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.inf | 45 +++
4 files changed, 457 insertions(+)
create mode 100644 Silicon/Maxim/Library/Ds1307RtcLib/Ds1307Rtc.h
create mode 100644 Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c
create mode 100644 Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.dec
create mode 100644 Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.inf
diff --git a/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307Rtc.h b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307Rtc.h
new file mode 100644
index 0000000..96271f8
--- /dev/null
+++ b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307Rtc.h
@@ -0,0 +1,59 @@
+/** Ds1307Rtc.h
+*
+* Copyright 2017 NXP
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __DS1307RTC_H__
+#define __DS1307RTC_H__
+
+/*
+ * RTC time register
+ */
+#define DS1307_SEC_REG_ADDR 0x00
+#define DS1307_MIN_REG_ADDR 0x01
+#define DS1307_HR_REG_ADDR 0x02
+#define DS1307_DAY_REG_ADDR 0x03
+#define DS1307_DATE_REG_ADDR 0x04
+#define DS1307_MON_REG_ADDR 0x05
+#define DS1307_YR_REG_ADDR 0x06
+
+#define DS1307_SEC_BIT_CH 0x80 /* Clock Halt (in Register 0) */
+
+/*
+ * RTC control register
+ */
+#define DS1307_CTL_REG_ADDR 0x07
+
+#define START_YEAR 1970
+#define END_YEAR 2070
+
+/*
+ * TIME MASKS
+ */
+#define MASK_SEC 0x7F
+#define MASK_MIN 0x7F
+#define MASK_HOUR 0x3F
+#define MASK_DAY 0x3F
+#define MASK_MONTH 0x1F
+
+/*
+ * I2C FLAGS
+ */
+#define I2C_REG_ADDRESS 0x2
+
+typedef struct {
+ UINTN OperationCount;
+ EFI_I2C_OPERATION SetAddressOp;
+ EFI_I2C_OPERATION GetSetDateTimeOp;
+} RTC_I2C_REQUEST;
+
+#endif // __DS1307RTC_H__
diff --git a/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c
new file mode 100644
index 0000000..e362f2b
--- /dev/null
+++ b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.c
@@ -0,0 +1,327 @@
+/** Ds1307RtcLib.c
+ Implement EFI RealTimeClock via RTC Lib for DS1307 RTC.
+
+ Based on RTC implementation available in
+ EmbeddedPkg/Library/TemplateRealTimeClockLib/RealTimeClockLib.c
+
+ Copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
+ Copyright 2017 NXP
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <PiDxe.h>
+#include <Base.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/RealTimeClockLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Protocol/I2cMaster.h>
+
+#include "Ds1307Rtc.h"
+
+STATIC VOID *mDriverEventRegistration;
+STATIC EFI_I2C_MASTER_PROTOCOL *mI2cMaster;
+
+/**
+ Read RTC register.
+
+ @param RtcRegAddr Register offset of RTC to be read.
+
+ @retval Register Value read
+
+**/
+
+STATIC
+UINT8
+RtcRead (
+ IN UINT8 RtcRegAddr
+ )
+{
+ RTC_I2C_REQUEST Req;
+ EFI_STATUS Status;
+ UINT8 Val;
+
+ Val = 0;
+
+ Req.OperationCount = 2;
+
+ Req.SetAddressOp.Flags = 0;
+ Req.SetAddressOp.LengthInBytes = sizeof (RtcRegAddr);
+ Req.SetAddressOp.Buffer = &RtcRegAddr;
+
+ Req.GetSetDateTimeOp.Flags = I2C_FLAG_READ;
+ Req.GetSetDateTimeOp.LengthInBytes = sizeof (Val);
+ Req.GetSetDateTimeOp.Buffer = &Val;
+
+ Status = mI2cMaster->StartRequest (mI2cMaster, FixedPcdGet8 (PcdI2cSlaveAddress),
+ (VOID *)&Req,
+ NULL, NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "RTC read error at Addr:0x%x\n", RtcRegAddr));
+ }
+
+ return Val;
+}
+
+/**
+ Write RTC register.
+
+ @param RtcRegAddr Register offset of RTC to write.
+ @param Val Value to be written
+
+**/
+
+STATIC
+VOID
+RtcWrite (
+ IN UINT8 RtcRegAddr,
+ IN UINT8 Val
+ )
+{
+ RTC_I2C_REQUEST Req;
+ EFI_STATUS Status;
+
+ Req.OperationCount = 2;
+
+ Req.SetAddressOp.Flags = 0;
+ Req.SetAddressOp.LengthInBytes = sizeof (RtcRegAddr);
+ Req.SetAddressOp.Buffer = &RtcRegAddr;
+
+ Req.GetSetDateTimeOp.Flags = 0;
+ Req.GetSetDateTimeOp.LengthInBytes = sizeof (Val);
+ Req.GetSetDateTimeOp.Buffer = &Val;
+
+ Status = mI2cMaster->StartRequest (mI2cMaster, FixedPcdGet8 (PcdI2cSlaveAddress),
+ (VOID *)&Req,
+ NULL, NULL);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "RTC write error at Addr:0x%x\n", RtcRegAddr));
+ }
+}
+
+/**
+ Returns the current time and date information, and the time-keeping capabilities
+ of the hardware platform.
+
+ @param Time A pointer to storage to receive a snapshot of the current time.
+ @param Capabilities An optional pointer to a buffer to receive the real time clock
+ device's capabilities.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER Time is NULL.
+ @retval EFI_DEVICE_ERROR The time could not be retrieved due to hardware error.
+
+**/
+
+EFI_STATUS
+EFIAPI
+LibGetTime (
+ OUT EFI_TIME *Time,
+ OUT EFI_TIME_CAPABILITIES *Capabilities
+ )
+{
+ EFI_STATUS Status;
+ UINT8 Second;
+ UINT8 Minute;
+ UINT8 Hour;
+ UINT8 Day;
+ UINT8 Month;
+ UINT8 Year;
+
+ if (mI2cMaster == NULL) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ Status = EFI_SUCCESS;
+
+ Second = RtcRead (DS1307_SEC_REG_ADDR);
+ Minute = RtcRead (DS1307_MIN_REG_ADDR);
+ Hour = RtcRead (DS1307_HR_REG_ADDR);
+ Day = RtcRead (DS1307_DATE_REG_ADDR);
+ Month = RtcRead (DS1307_MON_REG_ADDR);
+ Year = RtcRead (DS1307_YR_REG_ADDR);
+
+ if (Second & DS1307_SEC_BIT_CH) {
+ DEBUG ((DEBUG_ERROR, "### Warning: RTC oscillator has stopped\n"));
+ /* clear the CH flag */
+ RtcWrite (DS1307_SEC_REG_ADDR,
+ RtcRead (DS1307_SEC_REG_ADDR) & ~DS1307_SEC_BIT_CH);
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ Time->Second = BcdToDecimal8 (Second & MASK_SEC);
+ Time->Minute = BcdToDecimal8 (Minute & MASK_MIN);
+ Time->Hour = BcdToDecimal8 (Hour & MASK_HOUR);
+ Time->Day = BcdToDecimal8 (Day & MASK_DAY);
+ Time->Month = BcdToDecimal8 (Month & MASK_MONTH);
+
+ //
+ // RTC can save year 1970 to 2069
+ // On writing Year, save year % 100
+ // On Reading reversing the operation e.g. 2012
+ // write = 12 (2012 % 100)
+ // read = 2012 (12 + 2000)
+ //
+ Time->Year = BcdToDecimal8 (Year) +
+ (BcdToDecimal8 (Year) >= 70 ? START_YEAR - 70 : END_YEAR -70);
+
+ return Status;
+}
+
+/**
+ Sets the current local time and date information.
+
+ @param Time A pointer to the current time.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+ @retval EFI_INVALID_PARAMETER A time field is out of range.
+
+**/
+EFI_STATUS
+EFIAPI
+LibSetTime (
+ IN EFI_TIME *Time
+ )
+{
+ if (mI2cMaster == NULL) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (Time->Year < START_YEAR || Time->Year >= END_YEAR){
+ DEBUG ((DEBUG_ERROR, "WARNING: Year should be between 1970 and 2069!\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ RtcWrite (DS1307_YR_REG_ADDR, DecimalToBcd8 (Time->Year % 100));
+ RtcWrite (DS1307_MON_REG_ADDR, DecimalToBcd8 (Time->Month));
+ RtcWrite (DS1307_DATE_REG_ADDR, DecimalToBcd8 (Time->Day));
+ RtcWrite (DS1307_HR_REG_ADDR, DecimalToBcd8 (Time->Hour));
+ RtcWrite (DS1307_MIN_REG_ADDR, DecimalToBcd8 (Time->Minute));
+ RtcWrite (DS1307_SEC_REG_ADDR, DecimalToBcd8 (Time->Second));
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Returns the current wakeup alarm clock setting.
+
+ @param Enabled Indicates if the alarm is currently enabled or disabled.
+ @param Pending Indicates if the alarm signal is pending and requires acknowledgement.
+ @param Time The current alarm setting.
+
+ @retval EFI_SUCCESS The alarm settings were returned.
+ @retval EFI_INVALID_PARAMETER Any parameter is NULL.
+ @retval EFI_DEVICE_ERROR The wakeup time could not be retrieved due to a hardware error.
+
+**/
+EFI_STATUS
+EFIAPI
+LibGetWakeupTime (
+ OUT BOOLEAN *Enabled,
+ OUT BOOLEAN *Pending,
+ OUT EFI_TIME *Time
+ )
+{
+ // Not a required feature
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Sets the system wakeup alarm clock time.
+
+ @param Enabled Enable or disable the wakeup alarm.
+ @param Time If Enable is TRUE, the time to set the wakeup alarm for.
+
+ @retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. If
+ Enable is FALSE, then the wakeup alarm was disabled.
+ @retval EFI_INVALID_PARAMETER A time field is out of range.
+ @retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error.
+ @retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform.
+
+**/
+EFI_STATUS
+EFIAPI
+LibSetWakeupTime (
+ IN BOOLEAN Enabled,
+ OUT EFI_TIME *Time
+ )
+{
+ // Not a required feature
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+VOID
+I2cDriverRegistrationEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ EFI_I2C_MASTER_PROTOCOL *I2cMaster;
+ UINTN BusFrequency;
+
+ Status = gBS->LocateProtocol (&gEfiI2cMasterProtocolGuid, NULL, (VOID **)&I2cMaster);
+
+ gBS->CloseEvent (Event);
+
+ ASSERT_EFI_ERROR (Status);
+
+ Status = I2cMaster->Reset (I2cMaster);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: I2CMaster->Reset () failed - %r\n",
+ __FUNCTION__, Status));
+ return;
+ }
+
+ BusFrequency = FixedPcdGet16 (PcdI2cBusFrequency);
+ Status = I2cMaster->SetBusFrequency (I2cMaster, &BusFrequency);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: I2CMaster->SetBusFrequency () failed - %r\n",
+ __FUNCTION__, Status));
+ return;
+ }
+
+ mI2cMaster = I2cMaster;
+}
+
+/**
+ This is the declaration of an EFI image entry point. This can be the entry point to an application
+ written to this specification, an EFI boot service driver.
+
+ @param ImageHandle Handle that identifies the loaded image.
+ @param SystemTable System Table for this image.
+
+ @retval EFI_SUCCESS The operation completed successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+LibRtcInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ //
+ // Register a protocol registration notification callback on the driver
+ // binding protocol so we can attempt to connect our I2C master to it
+ // as soon as it appears.
+ //
+ EfiCreateProtocolNotifyEvent (
+ &gEfiI2cMasterProtocolGuid,
+ TPL_CALLBACK,
+ I2cDriverRegistrationEvent,
+ NULL,
+ &mDriverEventRegistration);
+
+ return EFI_SUCCESS;
+}
diff --git a/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.dec b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.dec
new file mode 100644
index 0000000..1aaf897
--- /dev/null
+++ b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.dec
@@ -0,0 +1,26 @@
+#/** @file
+#
+# Copyright 2017 NXP
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ DEC_SPECIFICATION = 0x0001001A
+ PACKAGE_NAME = Ds1307RtcLib
+ PACKAGE_GUID = 0c095cf6-834d-4fa2-a5a0-31ac35591ad2
+ PACKAGE_VERSION = 0.1
+
+[Guids]
+ gDs1307RtcLibTokenSpaceGuid = { 0xd939eb84, 0xa95a, 0x46a0, { 0xa8, 0x2b, 0xb9, 0x64, 0x30, 0xcf, 0xf5, 0x99 }}
+
+[PcdsFixedAtBuild]
+ gDs1307RtcLibTokenSpaceGuid.PcdI2cSlaveAddress|0|UINT8|0x00000001
+ gDs1307RtcLibTokenSpaceGuid.PcdI2cBusFrequency|0|UINT32|0x00000002
diff --git a/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.inf b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.inf
new file mode 100644
index 0000000..1182211
--- /dev/null
+++ b/Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.inf
@@ -0,0 +1,45 @@
+# @Ds1307RtcLib.inf
+#
+# Copyright (c) 2016, Freescale Semiconductor, Inc. All rights reserved.
+# Copyright (c) 2017 NXP
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = Ds1307RtcLib
+ FILE_GUID = 7112fb46-8dda-4a41-ac40-bf212fedfc08
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = RealTimeClockLib
+
+[Sources.common]
+ Ds1307RtcLib.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Maxim/Library/Ds1307RtcLib/Ds1307RtcLib.dec
+
+[LibraryClasses]
+ DebugLib
+ UefiBootServicesTableLib
+ UefiLib
+
+[Protocols]
+ gEfiDriverBindingProtocolGuid ## CONSUMES
+ gEfiI2cMasterProtocolGuid ## CONSUMES
+
+[FixedPcd]
+ gDs1307RtcLibTokenSpaceGuid.PcdI2cSlaveAddress
+ gDs1307RtcLibTokenSpaceGuid.PcdI2cBusFrequency
+
+[Depex]
+ gEfiI2cMasterProtocolGuid
--
1.9.1
next prev parent reply other threads:[~2017-11-22 9:57 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-07 14:42 [PATCH 00/10] edk2-platforms/Platform/NXP Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 01/10] Platform/NXP: Library to provide helper functions Meenakshi Aggarwal
2017-11-13 12:06 ` Ard Biesheuvel
2017-11-14 5:15 ` Meenakshi Aggarwal
2017-11-13 13:14 ` Leif Lindholm
2017-11-14 5:52 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 02/10] Platform/NXP: Add support for system reset library Meenakshi Aggarwal
2017-11-13 12:09 ` Ard Biesheuvel
2017-11-14 5:19 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 03/10] Platform/NXP: Add support for Big Endian Mmio APIs Meenakshi Aggarwal
2017-11-13 12:26 ` Ard Biesheuvel
2017-11-14 4:10 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 04/10] Platform/NXP : Add support for Watchdog driver Meenakshi Aggarwal
2017-11-13 12:23 ` Ard Biesheuvel
2017-11-14 5:36 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 05/10] Platform/NXP : Add support for DUART library Meenakshi Aggarwal
2017-11-13 12:28 ` Ard Biesheuvel
2017-11-14 4:12 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 06/10] Platform/NXP: Add support for I2c operations library Meenakshi Aggarwal
2017-11-13 12:36 ` Ard Biesheuvel
2017-11-14 5:36 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 07/10] Platform/NXP : Add support for DS1307 RTC library Meenakshi Aggarwal
2017-11-13 12:42 ` Ard Biesheuvel
2017-11-14 5:51 ` Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 08/10] Platform/NXP: Add support for ArmPlatformLib Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 09/10] SocLib : Add support for initialization of peripherals Meenakshi Aggarwal
2017-11-07 14:42 ` [PATCH 10/10] Compilation : Add the fdf, dsc and dec files Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 1/9] Platform/NXP: Add support for Big Endian Mmio APIs Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 2/9] Platform/NXP : Add support for Watchdog driver Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 3/9] SocLib : Add support for initialization of peripherals Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 4/9] Platform/NXP : Add support for DUART library Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 5/9] Platform/NXP: Add support for I2c driver Meenakshi Aggarwal
2017-11-22 15:48 ` Meenakshi Aggarwal [this message]
2017-11-22 15:48 ` [PATCH v2 7/9] Platform/NXP: Add support for ArmPlatformLib Meenakshi Aggarwal
2017-11-22 15:48 ` [PATCH v2 8/9] Compilation : Add the fdf, dsc and dec files Meenakshi Aggarwal
2017-11-22 15:49 ` [PATCH v2 9/9] Build : Add build script and environment script Meenakshi Aggarwal
2017-11-26 15:48 ` [PATCH v2 1/9] Platform/NXP: Add support for Big Endian Mmio APIs Leif Lindholm
2017-11-27 5:08 ` Meenakshi Aggarwal
2017-11-27 7:10 ` Udit Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511365740-1157-6-git-send-email-meenakshi.aggarwal@nxp.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox