From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, neta@marvell.com, kostap@marvell.com,
jinghua@marvell.com, mw@semihalf.com, jsd@semihalf.com
Subject: [platforms: PATCH v3 4/4] Marvell/Armada: Enable variables support
Date: Tue, 28 Nov 2017 09:19:13 +0100 [thread overview]
Message-ID: <1511857153-9266-5-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1511857153-9266-1-git-send-email-mw@semihalf.com>
Wire up the non-volatile EFI variable store support, by switching from
the emulation driver to the real one. Define default values for
memory mapped SPI access, which must be configured by the early
firmware. In order to ensure proper execution, configure initialization
order with Depex entries.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
Platform/Marvell/Armada/Armada.dsc.inc | 25 +++++++++++++++++++-
Platform/Marvell/Armada/Armada70x0.fdf | 6 ++++-
2 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/Platform/Marvell/Armada/Armada.dsc.inc b/Platform/Marvell/Armada/Armada.dsc.inc
index 0c873fb..0da271e 100644
--- a/Platform/Marvell/Armada/Armada.dsc.inc
+++ b/Platform/Marvell/Armada/Armada.dsc.inc
@@ -364,6 +364,17 @@
# TRNG
gMarvellTokenSpaceGuid.PcdEip76TrngBaseAddress|0xF2760000
+ #
+ # Variable store - default values
+ #
+ gMarvellTokenSpaceGuid.PcdSpiMemoryBase|0xF9000000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0xF93C0000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x00010000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0xF93D0000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x00010000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0xF93E0000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x00010000
+
################################################################################
#
# Components Section - list of all EDK II Modules needed by this Platform
@@ -421,7 +432,6 @@
MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
- MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
@@ -478,6 +488,19 @@
NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
}
+ #
+ # Variable services
+ #
+ Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.inf
+ MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
+ <LibraryClasses>
+ AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+ NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
+ TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
+ }
+
# UEFI application (Shell Embedded Boot Loader)
ShellPkg/Application/Shell/Shell.inf {
<LibraryClasses>
diff --git a/Platform/Marvell/Armada/Armada70x0.fdf b/Platform/Marvell/Armada/Armada70x0.fdf
index ec2c368..ca92c60 100644
--- a/Platform/Marvell/Armada/Armada70x0.fdf
+++ b/Platform/Marvell/Armada/Armada70x0.fdf
@@ -103,7 +103,6 @@ FvNameGuid = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
- INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf
INF MdeModulePkg/Universal/ResetSystemRuntimeDxe/ResetSystemRuntimeDxe.inf
INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
@@ -115,6 +114,11 @@ FvNameGuid = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c
INF Platform/Marvell/Drivers/Spi/Devices/MvSpiFlash.inf
INF Platform/Marvell/Armada/Drivers/Armada70x0RngDxe/Armada70x0RngDxe.inf
+ # Variable services
+ INF Platform/Marvell/Drivers/Spi/Variables/MvFvbDxe.inf
+ INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
+
# Network support
INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf
INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
--
2.7.4
next prev parent reply other threads:[~2017-11-28 8:15 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-28 8:19 [platforms: PATCH v3 0/4] Armada 7k/8k variable support Marcin Wojtas
2017-11-28 8:19 ` [platforms: PATCH v3 1/4] Platform/Marvell: Introduce MvFvbDxe variable support driver Marcin Wojtas
2017-11-29 21:35 ` Marcin Wojtas
2017-11-29 22:38 ` Leif Lindholm
2017-11-28 8:19 ` [platforms: PATCH v3 2/4] Marvell/Drivers: MvSpiFlash: Enable using driver in RT Marcin Wojtas
2017-11-28 8:19 ` [platforms: PATCH v3 3/4] Marvell/Drivers: MvSpiDxe: " Marcin Wojtas
2017-11-28 8:19 ` Marcin Wojtas [this message]
2017-11-30 15:51 ` [platforms: PATCH v3 0/4] Armada 7k/8k variable support Leif Lindholm
2017-11-30 16:23 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511857153-9266-5-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox