* [Patch] Nt32Pkg/Nt32Pkg.fdf: Increase the size of FLASH Device.
@ 2018-01-30 2:04 Jiaxin Wu
2018-01-30 6:35 ` Wu, Hao A
0 siblings, 1 reply; 2+ messages in thread
From: Jiaxin Wu @ 2018-01-30 2:04 UTC (permalink / raw)
To: edk2-devel; +Cc: Ruiyu Ni, Hao Wu, Ye Ting, Fu Siyuan, Wu Jiaxin
Currently, the FV image size is not enough for the modules after
we enable some flags defined in Nt32Pkg.dsc, e.g:
DEFINE SECURE_BOOT_ENABLE = TRUE
DEFINE TLS_ENABLE = TRUE
DEFINE NETWORK_IP6_ENABLE = TRUE
This patch is to increase the size of FLASH Device to meet the requirement.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
---
Nt32Pkg/Nt32Pkg.fdf | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/Nt32Pkg/Nt32Pkg.fdf b/Nt32Pkg/Nt32Pkg.fdf
index d104cb7..db2719f 100644
--- a/Nt32Pkg/Nt32Pkg.fdf
+++ b/Nt32Pkg/Nt32Pkg.fdf
@@ -26,14 +26,14 @@
# existing system flash.
#
################################################################################
[FD.Nt32]
BaseAddress = 0x0|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFdBaseAddress #The base address of the FLASH Device.
-Size = 0x00380000|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFirmwareFdSize #The size in bytes of the FLASH Device
+Size = 0x00480000|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFirmwareFdSize #The size in bytes of the FLASH Device
ErasePolarity = 1
BlockSize = 0x10000
-NumBlocks = 0x38
+NumBlocks = 0x48
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
@@ -46,15 +46,15 @@ NumBlocks = 0x38
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
-0x00000000|0x00360000
+0x00000000|0x00460000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoveryBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoverySize
FV = FvRecovery
-0x00360000|0x0000c000
+0x00460000|0x0000c000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
#NV_VARIABLE_STORE
DATA = {
## This is the EFI_FIRMWARE_VOLUME_HEADER
# ZeroVector []
@@ -91,15 +91,15 @@ DATA = {
0xB8, 0xBF, 0x00, 0x00,
#FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
-0x0036c000|0x00002000
+0x0046c000|0x00002000
#NV_EVENT_LOG
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogBase|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogSize
-0x0036e000|0x00002000
+0x0046e000|0x00002000
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
#NV_FTW_WORKING
DATA = {
# EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =
# { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
@@ -109,11 +109,11 @@ DATA = {
0xE2, 0x33, 0xF2, 0x03, 0xFE, 0xFF, 0xFF, 0xFF,
# WriteQueueSize: UINT64
0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
}
-0x00370000|0x00010000
+0x00470000|0x00010000
#NV_FTW_SPARE
gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
################################################################################
#
--
1.9.5.msysgit.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [Patch] Nt32Pkg/Nt32Pkg.fdf: Increase the size of FLASH Device.
2018-01-30 2:04 [Patch] Nt32Pkg/Nt32Pkg.fdf: Increase the size of FLASH Device Jiaxin Wu
@ 2018-01-30 6:35 ` Wu, Hao A
0 siblings, 0 replies; 2+ messages in thread
From: Wu, Hao A @ 2018-01-30 6:35 UTC (permalink / raw)
To: Wu, Jiaxin, edk2-devel@lists.01.org; +Cc: Ni, Ruiyu, Ye, Ting, Fu, Siyuan
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Best Regards,
Hao Wu
> -----Original Message-----
> From: Wu, Jiaxin
> Sent: Tuesday, January 30, 2018 10:04 AM
> To: edk2-devel@lists.01.org
> Cc: Ni, Ruiyu; Wu, Hao A; Ye, Ting; Fu, Siyuan; Wu, Jiaxin
> Subject: [Patch] Nt32Pkg/Nt32Pkg.fdf: Increase the size of FLASH Device.
>
> Currently, the FV image size is not enough for the modules after
> we enable some flags defined in Nt32Pkg.dsc, e.g:
> DEFINE SECURE_BOOT_ENABLE = TRUE
> DEFINE TLS_ENABLE = TRUE
> DEFINE NETWORK_IP6_ENABLE = TRUE
>
> This patch is to increase the size of FLASH Device to meet the requirement.
>
> Cc: Ruiyu Ni <ruiyu.ni@intel.com>
> Cc: Hao Wu <hao.a.wu@intel.com>
> Cc: Ye Ting <ting.ye@intel.com>
> Cc: Fu Siyuan <siyuan.fu@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
> ---
> Nt32Pkg/Nt32Pkg.fdf | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/Nt32Pkg/Nt32Pkg.fdf b/Nt32Pkg/Nt32Pkg.fdf
> index d104cb7..db2719f 100644
> --- a/Nt32Pkg/Nt32Pkg.fdf
> +++ b/Nt32Pkg/Nt32Pkg.fdf
> @@ -26,14 +26,14 @@
> # existing system flash.
> #
>
> ################################################################
> ################
> [FD.Nt32]
> BaseAddress = 0x0|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFdBaseAddress
> #The base address of the FLASH Device.
> -Size =
> 0x00380000|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFirmwareFdSize #The size
> in bytes of the FLASH Device
> +Size =
> 0x00480000|gEfiNt32PkgTokenSpaceGuid.PcdWinNtFirmwareFdSize #The size
> in bytes of the FLASH Device
> ErasePolarity = 1
> BlockSize = 0x10000
> -NumBlocks = 0x38
> +NumBlocks = 0x48
>
>
> ################################################################
> ################
> #
> # Following are lists of FD Region layout which correspond to the locations of
> different
> # images within the flash device.
> @@ -46,15 +46,15 @@ NumBlocks = 0x38
> # Offset|Size
> # PcdOffsetCName|PcdSizeCName
> # RegionType <FV, DATA, or FILE>
> #
>
> ################################################################
> ################
> -0x00000000|0x00360000
> +0x00000000|0x00460000
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashFvRecoveryBase|gEfiNt32PkgToken
> SpaceGuid.PcdWinNtFlashFvRecoverySize
> FV = FvRecovery
>
> -0x00360000|0x0000c000
> +0x00460000|0x0000c000
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageVariableBase|gEfiMdeM
> odulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
> #NV_VARIABLE_STORE
> DATA = {
> ## This is the EFI_FIRMWARE_VOLUME_HEADER
> # ZeroVector []
> @@ -91,15 +91,15 @@ DATA = {
> 0xB8, 0xBF, 0x00, 0x00,
> #FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32
> 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
> }
>
> -0x0036c000|0x00002000
> +0x0046c000|0x00002000
> #NV_EVENT_LOG
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogBase|gEfiNt32P
> kgTokenSpaceGuid.PcdWinNtFlashNvStorageEventLogSize
>
> -0x0036e000|0x00002000
> +0x0046e000|0x00002000
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwWorkingBase|gEfiMd
> eModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
> #NV_FTW_WORKING
> DATA = {
> # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature =
> gEdkiiWorkingBlockSignatureGuid =
> # { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b,
> 0x95 }}
> @@ -109,11 +109,11 @@ DATA = {
> 0xE2, 0x33, 0xF2, 0x03, 0xFE, 0xFF, 0xFF, 0xFF,
> # WriteQueueSize: UINT64
> 0xE0, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
> }
>
> -0x00370000|0x00010000
> +0x00470000|0x00010000
> #NV_FTW_SPARE
>
> gEfiNt32PkgTokenSpaceGuid.PcdWinNtFlashNvStorageFtwSpareBase|gEfiMdeM
> odulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
>
>
> ################################################################
> ################
> #
> --
> 1.9.5.msysgit.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-01-30 6:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-01-30 2:04 [Patch] Nt32Pkg/Nt32Pkg.fdf: Increase the size of FLASH Device Jiaxin Wu
2018-01-30 6:35 ` Wu, Hao A
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox