[PATCH edk2-platforms 32/39] Silicon/NXP: Implement PciSegmentLib to support multiple RCs

[Meenakshi <meenakshi.aggarwal@nxp.com>]

From: Vabhav <vabhav.sharma@nxp.com>

Multiple root complex support is not provided by standard library
PciLib/PciExpressLib/PciSegmentLib, Reimplementing it and provide
function for reading/writing into PCIe configuration Space.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vabhav <vabhav.sharma@nxp.com>
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
---
 Silicon/NXP/Include/Pcie.h                         | 143 +++++
 Silicon/NXP/Library/PciSegmentLib/PciSegmentLib.c  | 604 +++++++++++++++++++++
 .../NXP/Library/PciSegmentLib/PciSegmentLib.inf    |  41 ++
 3 files changed, 788 insertions(+)
 create mode 100644 Silicon/NXP/Include/Pcie.h
 create mode 100644 Silicon/NXP/Library/PciSegmentLib/PciSegmentLib.c
 create mode 100644 Silicon/NXP/Library/PciSegmentLib/PciSegmentLib.inf

diff --git a/Silicon/NXP/Include/Pcie.h b/Silicon/NXP/Include/Pcie.h
new file mode 100644
index 0000000..a7e6f9b
--- /dev/null
+++ b/Silicon/NXP/Include/Pcie.h
@@ -0,0 +1,143 @@
+/** @file
+  PCI memory configuration for NXP
+
+  Copyright 2018 NXP
+
+  This program and the accompanying materials are licensed and made available
+  under the terms and conditions of the BSD License which accompanies this
+  distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php.
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
+  WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __PCI_H__
+#define __PCI_H__
+
+// Segment 0
+#define PCI_SEG0_NUM              0
+
+#define PCI_SEG0_BUSNUM_MIN       0x0
+#define PCI_SEG0_BUSNUM_MAX       0xff
+
+#define PCI_SEG0_PORTIO_MIN       0x0
+#define PCI_SEG0_PORTIO_MAX       0xffff
+
+#define PCI_SEG0_MMIO32_MIN       0x40000000
+#define PCI_SEG0_MMIO32_MAX       0x4fffffff
+#define PCI_SEG0_MMIO64_MIN       PCI_SEG0_MMIO_MEMBASE + SEG_MEM_SIZE
+#define PCI_SEG0_MMIO64_MAX       PCI_SEG0_MMIO_MEMBASE + SEG_MEM_LIMIT
+#define PCI_SEG0_MMIO_MEMBASE     FixedPcdGet64 (PcdPciExp1BaseAddr)
+
+#define PCI_SEG0_DBI_BASE         0x03400000
+
+// Segment 1
+#define PCI_SEG1_NUM              1
+
+#define PCI_SEG1_BUSNUM_MIN       0x0
+#define PCI_SEG1_BUSNUM_MAX       0xff
+
+#define PCI_SEG1_PORTIO_MIN       0x10000
+#define PCI_SEG1_PORTIO_MAX       0x1ffff
+
+#define PCI_SEG1_MMIO32_MIN       0x50000000
+#define PCI_SEG1_MMIO32_MAX       0x5fffffff
+#define PCI_SEG1_MMIO64_MIN       PCI_SEG1_MMIO_MEMBASE + SEG_MEM_SIZE
+#define PCI_SEG1_MMIO64_MAX       PCI_SEG1_MMIO_MEMBASE + SEG_MEM_LIMIT
+#define PCI_SEG1_MMIO_MEMBASE     FixedPcdGet64 (PcdPciExp2BaseAddr)
+
+#define PCI_SEG1_DBI_BASE         0x03500000
+
+// Segment 2
+#define PCI_SEG2_NUM              2
+
+#define PCI_SEG2_BUSNUM_MIN       0x0
+#define PCI_SEG2_BUSNUM_MAX       0xff
+
+#define PCI_SEG2_PORTIO_MIN       0x20000
+#define PCI_SEG2_PORTIO_MAX       0x2ffff
+
+#define PCI_SEG2_MMIO32_MIN       0x60000000
+#define PCI_SEG2_MMIO32_MAX       0x6fffffff
+#define PCI_SEG2_MMIO64_MIN       PCI_SEG2_MMIO_MEMBASE + SEG_MEM_SIZE
+#define PCI_SEG2_MMIO64_MAX       PCI_SEG2_MMIO_MEMBASE + SEG_MEM_LIMIT
+#define PCI_SEG2_MMIO_MEMBASE     FixedPcdGet64 (PcdPciExp3BaseAddr)
+
+#define PCI_SEG2_DBI_BASE         0x03600000
+
+// Segment 3
+#define PCI_SEG3_NUM              3
+
+#define PCI_SEG3_BUSNUM_MIN       0x0
+#define PCI_SEG3_BUSNUM_MAX       0xff
+
+#define PCI_SEG3_PORTIO_MIN       0x30000
+#define PCI_SEG3_PORTIO_MAX       0x3ffff
+
+#define PCI_SEG3_MMIO32_MIN       0x70000000
+#define PCI_SEG3_MMIO32_MAX       0x7fffffff
+#define PCI_SEG3_MMIO64_MIN       PCI_SEG3_MMIO_MEMBASE + SEG_MEM_SIZE
+#define PCI_SEG3_MMIO64_MAX       PCI_SEG3_MMIO_MEMBASE + SEG_MEM_LIMIT
+#define PCI_SEG3_MMIO_MEMBASE     FixedPcdGet64 (PcdPciExp4BaseAddr)
+
+#define PCI_SEG3_DBI_BASE         0x03700000
+
+// Segment configuration
+#define SEG_CFG_SIZE              0x00001000
+#define SEG_CFG_BUS               0x00000000
+#define SEG_MEM_SIZE              0x40000000
+#define SEG_MEM_LIMIT             0x7fffffff
+#define SEG_MEM_BUS               0x40000000
+#define SEG_IO_SIZE               0x00010000
+#define SEG_IO_BUS                0x00000000
+#define PCI_BASE_DIFF             0x800000000
+#define PCI_DBI_SIZE_DIFF         0x100000
+#define PCI_SEG0_PHY_CFG0_BASE    PCI_SEG0_MMIO_MEMBASE
+#define PCI_SEG0_PHY_CFG1_BASE    PCI_SEG0_PHY_CFG0_BASE + SEG_CFG_SIZE
+#define PCI_SEG0_PHY_MEM_BASE     PCI_SEG0_MMIO64_MIN
+#define PCI_SEG0_PHY_IO_BASE      PCI_SEG0_MMIO_MEMBASE + SEG_IO_SIZE
+
+// iATU configuration
+#define IATU_VIEWPORT_OFF                            0x900
+#define IATU_VIEWPORT_OUTBOUND                       0
+
+#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0            0x904
+#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_MEM   0x0
+#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_IO    0x2
+#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG0  0x4
+#define IATU_REGION_CTRL_1_OFF_OUTBOUND_0_TYPE_CFG1  0x5
+
+#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0            0x908
+#define IATU_REGION_CTRL_2_OFF_OUTBOUND_0_REGION_EN  BIT31
+
+#define IATU_LWR_BASE_ADDR_OFF_OUTBOUND_0            0x90C
+#define IATU_UPPER_BASE_ADDR_OFF_OUTBOUND_0          0x910
+#define IATU_LIMIT_ADDR_OFF_OUTBOUND_0               0x914
+#define IATU_LWR_TARGET_ADDR_OFF_OUTBOUND_0          0x918
+#define IATU_UPPER_TARGET_ADDR_OFF_OUTBOUND_0        0x91C
+
+#define IATU_REGION_INDEX0                           0x0
+#define IATU_REGION_INDEX1                           0x1
+#define IATU_REGION_INDEX2                           0x2
+#define IATU_REGION_INDEX3                           0x3
+
+// PCIe Controller configuration
+#define NUM_PCIE_CONTROLLER  FixedPcdGet32 (PcdNumPciController)
+#define PCI_LUT_DBG          FixedPcdGet32 (PcdPcieLutDbg)
+#define PCI_LUT_BASE         FixedPcdGet32 (PcdPcieLutBase)
+#define LTSSM_STATE_MASK     0x3f
+#define LTSSM_PCIE_L0        0x11
+#define PCI_LINK_CAP         0x7c
+#define PCI_LINK_SPEED_MASK  0xf
+#define PCI_CLASS_BRIDGE_PCI 0x6040010
+#define PCI_CLASS_DEVICE     0x8
+#define PCI_DBI_RO_WR_EN     0x8bc
+#define PCI_BASE_ADDRESS_0   0x10
+
+VOID GetSerdesProtocolMaps (UINT64 *);
+
+BOOLEAN IsSerDesLaneProtocolConfigured (UINT64, UINT16);
+
+#endif
diff --git a/Silicon/NXP/Library/PciSegmentLib/PciSegmentLib.c b/Silicon/NXP/Library/PciSegmentLib/PciSegmentLib.c
new file mode 100644
index 0000000..acb614d
--- /dev/null
+++ b/Silicon/NXP/Library/PciSegmentLib/PciSegmentLib.c
@@ -0,0 +1,604 @@
+/** @file
+  PCI Segment Library for NXP SoCs with multiple RCs
+
+  Copyright 2018 NXP
+
+  This program and the accompanying materials are
+  licensed and made available under the terms and conditions of
+  the BSD License which accompanies this distribution.  The full
+  text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php.
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Base.h>
+#include <Library/PciSegmentLib.h>
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Pcie.h>
+
+typedef enum {
+  PciCfgWidthUint8      = 0,
+  PciCfgWidthUint16,
+  PciCfgWidthUint32,
+  PciCfgWidthMax
+} PCI_CFG_WIDTH;
+
+/**
+  Assert the validity of a PCI Segment address.
+  A valid PCI Segment address should not contain 1's in bits 28..31 and 48..63
+
+  @param  A The address to validate.
+  @param  M Additional bits to assert to be zero.
+
+**/
+#define ASSERT_INVALID_PCI_SEGMENT_ADDRESS(A,M) \
+  ASSERT (((A) & (0xffff0000f0000000ULL | (M))) == 0)
+
+/**
+  Function to return PCIe Physical Address(PCIe view) or Controller
+  Address(CPU view) for different RCs
+
+  @param  Address Address passed from bus layer.
+  @param  Segment Segment number for Root Complex.
+
+  @return Return PCIe CPU or Controller address.
+
+**/
+STATIC
+UINT64
+PciSegmentLibGetConfigBase (
+  IN  UINT64      Address,
+  IN  UINT16      Segment
+  )
+{
+
+  switch (Segment) {
+    // Root Complex 1
+    case PCI_SEG0_NUM:
+      // Reading bus number(bits 20-27)
+      if ((Address >> 20) & 1) {
+        return PCI_SEG0_MMIO_MEMBASE;
+      } else {
+        // On Bus 0 RCs are connected
+        return PCI_SEG0_DBI_BASE;
+      }
+    // Root Complex 2
+    case PCI_SEG1_NUM:
+      // Reading bus number(bits 20-27)
+      if ((Address >> 20) & 1) {
+        return PCI_SEG1_MMIO_MEMBASE;
+      } else {
+        // On Bus 0 RCs are connected
+        return PCI_SEG1_DBI_BASE;
+      }
+    // Root Complex 3
+    case PCI_SEG2_NUM:
+      // Reading bus number(bits 20-27)
+      if ((Address >> 20) & 1) {
+        return PCI_SEG2_MMIO_MEMBASE;
+      } else {
+        // On Bus 0 RCs are connected
+        return PCI_SEG2_DBI_BASE;
+      }
+    // Root Complex 4
+    case PCI_SEG3_NUM:
+      // Reading bus number(bits 20-27)
+      if ((Address >> 20) & 1) {
+        return PCI_SEG3_MMIO_MEMBASE;
+      } else {
+        // On Bus 0 RCs are connected
+        return PCI_SEG3_DBI_BASE;
+      }
+    default:
+      return 0;
+  }
+
+}
+
+/**
+  Internal worker function to read a PCI configuration register.
+
+  @param  Address The address that encodes the Segment, PCI Bus, Device,
+                  Function and Register.
+  @param  Width   The width of data to read
+
+  @return The value read from the PCI configuration register.
+
+**/
+STATIC
+UINT32
+PciSegmentLibReadWorker (
+  IN  UINT64                      Address,
+  IN  PCI_CFG_WIDTH               Width
+  )
+{
+  UINT64    Base;
+  UINT16    Offset;
+  UINT16    Segment;
+
+  //
+  // Reading Segment number(47-32) bits in Address
+  //
+  Segment = (Address >> 32);
+  //
+  // Reading Function(12-0) bits in Address
+  //
+  Offset = (Address & 0xfff );
+
+  Base = PciSegmentLibGetConfigBase (Address, Segment);
+
+  //
+  // ignore devices > 0 on bus 0
+  //
+  if ((Address & 0xff00000) == 0 && (Address & 0xf8000) != 0) {
+    return MAX_UINT32;
+  }
+
+  //
+  // ignore device > 0 on bus 1
+  //
+  if ((Address & 0xfe00000) == 0 && (Address & 0xf8000) != 0) {
+    return MAX_UINT32;
+  }
+
+  switch (Width) {
+  case PciCfgWidthUint8:
+    return MmioRead8 (Base + (UINT8)Offset);
+  case PciCfgWidthUint16:
+    return MmioRead16 (Base + (UINT16)Offset);
+  case PciCfgWidthUint32:
+    return MmioRead32 (Base + (UINT32)Offset);
+  default:
+    ASSERT (FALSE);
+  }
+
+  return CHAR_NULL;
+}
+
+/**
+  Internal worker function to writes a PCI configuration register.
+
+  @param  Address The address that encodes the Segment, PCI Bus, Device,
+                  Function and Register.
+  @param  Width   The width of data to write
+  @param  Data    The value to write.
+
+  @return The value written to the PCI configuration register.
+
+**/
+STATIC
+UINT32
+PciSegmentLibWriteWorker (
+  IN  UINT64                      Address,
+  IN  PCI_CFG_WIDTH               Width,
+  IN  UINT32                      Data
+  )
+{
+  UINT64    Base;
+  UINT32    Offset;
+  UINT16    Segment;
+
+  //
+  // Reading Segment number(47-32 bits) in Address
+  Segment = (Address >> 32);
+  //
+  // Reading Function(12-0 bits) in Address
+  //
+  Offset = (Address & 0xfff );
+
+  Base = PciSegmentLibGetConfigBase (Address, Segment);
+
+  //
+  // ignore devices > 0 on bus 0
+  //
+  if ((Address & 0xff00000) == 0 && (Address & 0xf8000) != 0) {
+    return Data;
+  }
+
+  //
+  // ignore device > 0 on bus 1
+  //
+  if ((Address & 0xfe00000) == 0 && (Address & 0xf8000) != 0) {
+    return MAX_UINT32;
+  }
+
+  switch (Width) {
+  case PciCfgWidthUint8:
+    MmioWrite8 (Base + (UINT8)Offset, Data);
+    break;
+  case PciCfgWidthUint16:
+    MmioWrite16 (Base + (UINT16)Offset, Data);
+    break;
+  case PciCfgWidthUint32:
+    MmioWrite32 (Base + (UINT16)Offset, Data);
+    break;
+  default:
+    ASSERT (FALSE);
+  }
+
+  return Data;
+}
+
+/**
+  Register a PCI device so PCI configuration registers may be accessed after
+  SetVirtualAddressMap().
+
+  If any reserved bits in Address are set, then ASSERT().
+
+  @param  Address                  The address that encodes the PCI Bus, Device,
+                                   Function and Register.
+
+  @retval RETURN_SUCCESS           The PCI device was registered for runtime access.
+  @retval RETURN_UNSUPPORTED       An attempt was made to call this function
+                                   after ExitBootServices().
+  @retval RETURN_UNSUPPORTED       The resources required to access the PCI device
+                                   at runtime could not be mapped.
+  @retval RETURN_OUT_OF_RESOURCES  There are not enough resources available to
+                                   complete the registration.
+
+**/
+RETURN_STATUS
+EFIAPI
+PciSegmentRegisterForRuntimeAccess (
+  IN UINTN  Address
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+  return RETURN_UNSUPPORTED;
+}
+
+/**
+  Reads an 8-bit PCI configuration register.
+
+  Reads and returns the 8-bit PCI configuration register specified by Address.
+
+  If any reserved bits in Address are set, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function,
+                    and Register.
+
+  @return The 8-bit PCI configuration register specified by Address.
+
+**/
+UINT8
+EFIAPI
+PciSegmentRead8 (
+  IN UINT64                    Address
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+  return (UINT8) PciSegmentLibReadWorker (Address, PciCfgWidthUint8);
+}
+
+/**
+  Writes an 8-bit PCI configuration register.
+
+  Writes the 8-bit PCI configuration register specified by Address with the value specified by Value.
+  Value is returned.  This function must guarantee that all PCI read and write operations are serialized.
+
+  If any reserved bits in Address are set, then ASSERT().
+
+  @param  Address     The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  Value       The value to write.
+
+  @return The value written to the PCI configuration register.
+
+**/
+UINT8
+EFIAPI
+PciSegmentWrite8 (
+  IN UINT64                    Address,
+  IN UINT8                     Value
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 0);
+
+  return (UINT8) PciSegmentLibWriteWorker (Address, PciCfgWidthUint8, Value);
+}
+
+/**
+  Reads a 16-bit PCI configuration register.
+
+  Reads and returns the 16-bit PCI configuration register specified by Address.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+
+  @return The 16-bit PCI configuration register specified by Address.
+
+**/
+UINT16
+EFIAPI
+PciSegmentRead16 (
+  IN UINT64                    Address
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+  return (UINT16) PciSegmentLibReadWorker (Address, PciCfgWidthUint16);
+}
+
+/**
+  Writes a 16-bit PCI configuration register.
+
+  Writes the 16-bit PCI configuration register specified by Address with the
+  value specified by Value.
+
+  Value is returned.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 16-bit boundary, then ASSERT().
+
+  @param  Address     The address that encodes the PCI Segment, Bus, Device, Function, and Register.
+  @param  Value       The value to write.
+
+  @return The parameter of Value.
+
+**/
+UINT16
+EFIAPI
+PciSegmentWrite16 (
+  IN UINT64                    Address,
+  IN UINT16                    Value
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 1);
+
+  return (UINT16) PciSegmentLibWriteWorker (Address, PciCfgWidthUint16, Value);
+}
+
+/**
+  Reads a 32-bit PCI configuration register.
+
+  Reads and returns the 32-bit PCI configuration register specified by Address.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+  @param  Address   The address that encodes the PCI Segment, Bus, Device, Function,
+                    and Register.
+
+  @return The 32-bit PCI configuration register specified by Address.
+
+**/
+UINT32
+EFIAPI
+PciSegmentRead32 (
+  IN UINT64                    Address
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+  return PciSegmentLibReadWorker (Address, PciCfgWidthUint32);
+}
+
+/**
+  Writes a 32-bit PCI configuration register.
+
+  Writes the 32-bit PCI configuration register specified by Address with the
+  value specified by Value.
+
+  Value is returned.
+
+  If any reserved bits in Address are set, then ASSERT().
+  If Address is not aligned on a 32-bit boundary, then ASSERT().
+
+  @param  Address     The address that encodes the PCI Segment, Bus, Device,
+                      Function, and Register.
+  @param  Value       The value to write.
+
+  @return The parameter of Value.
+
+**/
+UINT32
+EFIAPI
+PciSegmentWrite32 (
+  IN UINT64                    Address,
+  IN UINT32                    Value
+  )
+{
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (Address, 3);
+
+  return PciSegmentLibWriteWorker (Address, PciCfgWidthUint32, Value);
+}
+
+/**
+  Reads a range of PCI configuration registers into a caller supplied buffer.
+
+  Reads the range of PCI configuration registers specified by StartAddress and
+  Size into the buffer specified by Buffer. This function only allows the PCI
+  configuration registers from a single PCI function to be read. Size is
+  returned.
+
+  If any reserved bits in StartAddress are set, then ASSERT().
+  If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+  If Size > 0 and Buffer is NULL, then ASSERT().
+
+  @param  StartAddress  The starting address that encodes the PCI Segment, Bus,
+                        Device, Function and Register.
+  @param  Size          The size in bytes of the transfer.
+  @param  Buffer        The pointer to a buffer receiving the data read.
+
+  @return Size
+
+**/
+UINTN
+EFIAPI
+PciSegmentReadBuffer (
+  IN  UINT64                   StartAddress,
+  IN  UINTN                    Size,
+  OUT VOID                     *Buffer
+  )
+{
+  UINTN                             ReturnValue;
+
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+  // 0xFFF is used as limit for 4KB config space
+  ASSERT (((StartAddress & 0xFFF) + Size) <= SIZE_4KB);
+
+  if (Size == 0) {
+    return Size;
+  }
+
+  ASSERT (Buffer != NULL);
+
+  //
+  // Save Size for return
+  //
+  ReturnValue = Size;
+
+  if ((StartAddress & BIT0) != 0) {
+    //
+    // Read a byte if StartAddress is byte aligned
+    //
+    *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+    StartAddress += sizeof (UINT8);
+    Size -= sizeof (UINT8);
+    Buffer = (UINT8*)Buffer + BIT0;
+  }
+
+  if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+    //
+    // Read a word if StartAddress is word aligned
+    //
+    WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+    StartAddress += sizeof (UINT16);
+    Size -= sizeof (UINT16);
+    Buffer = (UINT16*)Buffer + BIT0;
+  }
+
+  while (Size >= sizeof (UINT32)) {
+    //
+    // Read as many double words as possible
+    //
+    WriteUnaligned32 (Buffer, PciSegmentRead32 (StartAddress));
+    StartAddress += sizeof (UINT32);
+    Size -= sizeof (UINT32);
+    Buffer = (UINT32*)Buffer + BIT0;
+  }
+
+  if (Size >= sizeof (UINT16)) {
+    //
+    // Read the last remaining word if exist
+    //
+    WriteUnaligned16 (Buffer, PciSegmentRead16 (StartAddress));
+    StartAddress += sizeof (UINT16);
+    Size -= sizeof (UINT16);
+    Buffer = (UINT16*)Buffer + BIT0;
+  }
+
+  if (Size >= sizeof (UINT8)) {
+    //
+    // Read the last remaining byte if exist
+    //
+    *(volatile UINT8 *)Buffer = PciSegmentRead8 (StartAddress);
+  }
+
+  return ReturnValue;
+}
+
+
+/**
+  Copies the data in a caller supplied buffer to a specified range of PCI
+  configuration space.
+
+  Writes the range of PCI configuration registers specified by StartAddress and
+  Size from the buffer specified by Buffer. This function only allows the PCI
+  configuration registers from a single PCI function to be written. Size is
+  returned.
+
+  If any reserved bits in StartAddress are set, then ASSERT().
+  If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().
+  If Size > 0 and Buffer is NULL, then ASSERT().
+
+  @param  StartAddress  The starting address that encodes the PCI Segment, Bus,
+                        Device, Function and Register.
+  @param  Size          The size in bytes of the transfer.
+  @param  Buffer        The pointer to a buffer containing the data to write.
+
+  @return The parameter of Size.
+
+**/
+UINTN
+EFIAPI
+PciSegmentWriteBuffer (
+  IN UINT64                    StartAddress,
+  IN UINTN                     Size,
+  IN VOID                      *Buffer
+  )
+{
+  UINTN                             ReturnValue;
+
+  ASSERT_INVALID_PCI_SEGMENT_ADDRESS (StartAddress, 0);
+  // 0xFFF is used as limit for 4KB config space
+  ASSERT (((StartAddress & 0xFFF) + Size) <= SIZE_4KB);
+
+  if (Size == 0) {
+    return Size;
+  }
+
+  ASSERT (Buffer != NULL);
+
+  //
+  // Save Size for return
+  //
+  ReturnValue = Size;
+
+  if ((StartAddress & BIT0) != 0) {
+    //
+    // Write a byte if StartAddress is byte aligned
+    //
+    PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer);
+    StartAddress += sizeof (UINT8);
+    Size -= sizeof (UINT8);
+    Buffer = (UINT8*)Buffer + BIT0;
+  }
+
+  if (Size >= sizeof (UINT16) && (StartAddress & BIT1) != 0) {
+    //
+    // Write a word if StartAddress is word aligned
+    //
+    PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+    StartAddress += sizeof (UINT16);
+    Size -= sizeof (UINT16);
+    Buffer = (UINT16*)Buffer + BIT0;
+  }
+
+  while (Size >= sizeof (UINT32)) {
+    //
+    // Write as many double words as possible
+    //
+    PciSegmentWrite32 (StartAddress, ReadUnaligned32 (Buffer));
+    StartAddress += sizeof (UINT32);
+    Size -= sizeof (UINT32);
+    Buffer = (UINT32*)Buffer + BIT0;
+  }
+
+  if (Size >= sizeof (UINT16)) {
+    //
+    // Write the last remaining word if exist
+    //
+    PciSegmentWrite16 (StartAddress, ReadUnaligned16 (Buffer));
+    StartAddress += sizeof (UINT16);
+    Size -= sizeof (UINT16);
+    Buffer = (UINT16*)Buffer + BIT0;
+  }
+
+  if (Size >= sizeof (UINT8)) {
+    //
+    // Write the last remaining byte if exist
+    //
+    PciSegmentWrite8 (StartAddress, *(UINT8*)Buffer);
+  }
+
+  return ReturnValue;
+}
diff --git a/Silicon/NXP/Library/PciSegmentLib/PciSegmentLib.inf b/Silicon/NXP/Library/PciSegmentLib/PciSegmentLib.inf
new file mode 100644
index 0000000..1ac83d4
--- /dev/null
+++ b/Silicon/NXP/Library/PciSegmentLib/PciSegmentLib.inf
@@ -0,0 +1,41 @@
+## @file
+#  PCI Segment Library for NXP SoCs with multiple RCs
+#
+#  Copyright 2018 NXP
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution. The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php.
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+  INF_VERSION                    = 0x0001001A
+  BASE_NAME                      = PciSegmentLib
+  FILE_GUID                      = c9f59261-5a60-4a4c-82f6-1f520442e100
+  MODULE_TYPE                    = BASE
+  VERSION_STRING                 = 1.0
+  LIBRARY_CLASS                  = PciSegmentLib
+
+[Sources]
+  PciSegmentLib.c
+
+[Packages]
+  MdePkg/MdePkg.dec
+  Silicon/NXP/NxpQoriqLs.dec
+
+[LibraryClasses]
+  BaseLib
+  DebugLib
+  IoLib
+  PcdLib
+
+[Pcd]
+  gNxpQoriqLsTokenSpaceGuid.PcdPciExp1BaseAddr
+  gNxpQoriqLsTokenSpaceGuid.PcdPciExp2BaseAddr
+  gNxpQoriqLsTokenSpaceGuid.PcdPciExp3BaseAddr
+  gNxpQoriqLsTokenSpaceGuid.PcdPciExp4BaseAddr
-- 
1.9.1