[PATCH edk2-platforms 05/39] Silicon/NXP: Add support for I2c driver

[Meenakshi <meenakshi.aggarwal@nxp.com>]

From: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>

I2C driver produces gEfiI2cMasterProtocolGuid which can be
used by other modules.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
---
 Silicon/NXP/Drivers/I2cDxe/I2cDxe.c   | 726 ++++++++++++++++++++++++++++++++++
 Silicon/NXP/Drivers/I2cDxe/I2cDxe.h   |  65 +++
 Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf |  55 +++
 3 files changed, 846 insertions(+)
 create mode 100644 Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
 create mode 100644 Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
 create mode 100644 Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf

diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
new file mode 100644
index 0000000..80a8826
--- /dev/null
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.c
@@ -0,0 +1,726 @@
+/** I2cDxe.c
+  I2c driver APIs for read, write, initialize, set speed and reset
+
+  Copyright 2017 NXP
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution. The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <Protocol/I2cMaster.h>
+
+#include "I2cDxe.h"
+
+STATIC CONST UINT16 ClkDiv[60][2] = {
+  { 20,  0x00 }, { 22, 0x01 },  { 24, 0x02 },  { 26, 0x03 },
+  { 28,  0x04 }, { 30,  0x05 }, { 32,  0x09 }, { 34, 0x06 },
+  { 36,  0x0A }, { 40, 0x07 },  { 44, 0x0C },  { 48, 0x0D },
+  { 52,  0x43 }, { 56,  0x0E }, { 60, 0x45 },  { 64, 0x12 },
+  { 68,  0x0F }, { 72,  0x13 }, { 80,  0x14 }, { 88,  0x15 },
+  { 96,  0x19 }, { 104, 0x16 }, { 112, 0x1A }, { 128, 0x17 },
+  { 136, 0x4F }, { 144, 0x1C }, { 160, 0x1D }, { 176, 0x55 },
+  { 192, 0x1E }, { 208, 0x56 }, { 224, 0x22 }, { 228, 0x24 },
+  { 240, 0x1F }, { 256, 0x23 }, { 288, 0x5C }, { 320, 0x25 },
+  { 384, 0x26 }, { 448, 0x2A }, { 480, 0x27 }, { 512, 0x2B },
+  { 576, 0x2C }, { 640, 0x2D }, { 768, 0x31 }, { 896, 0x32 },
+  { 960, 0x2F }, { 1024, 0x33 }, { 1152, 0x34 },{ 1280, 0x35 },
+  { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
+  { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
+  { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
+};
+
+/**
+  Calculate and return proper clock divider
+
+  @param  Rate       clock rate
+
+  @retval ClkDiv     Value used to get frequency divider value
+
+**/
+STATIC
+UINT8
+GetClkDiv (
+  IN  UINT32         Rate
+  )
+{
+  UINTN              ClkRate;
+  UINT32             Div;
+  UINT8              ClkDivx;
+
+  ClkRate = GetBusFrequency ();
+
+  Div = (ClkRate + Rate - 1) / Rate;
+
+  if (Div < ClkDiv[0][0]) {
+    ClkDivx = 0;
+  } else if (Div > ClkDiv[ARRAY_SIZE (ClkDiv) - 1][0]){
+    ClkDivx = ARRAY_SIZE (ClkDiv) - 1;
+  } else {
+    for (ClkDivx = 0; ClkDiv[ClkDivx][0] < Div; ClkDivx++);
+  }
+
+  return ClkDivx;
+}
+
+/**
+  Function used to check if i2c is in mentioned state or not
+
+  @param   I2cRegs        Pointer to I2C registers
+  @param   State          i2c state need to be checked
+
+  @retval  EFI_NOT_READY  Arbitration was lost
+  @retval  EFI_TIMEOUT    Timeout occured
+  @retval  CurrState      Value of state register
+
+**/
+STATIC
+EFI_STATUS
+WaitForI2cState (
+  IN  I2C_REGS            *I2cRegs,
+  IN  UINT32              State
+  )
+{
+  UINT8                   CurrState;
+  UINT64                  Cnt;
+
+  for (Cnt = 0; Cnt < 50000; Cnt++) {
+    MemoryFence ();
+    CurrState = MmioRead8 ((UINTN)&I2cRegs->I2cSr);
+    if (CurrState & I2C_SR_IAL) {
+       MmioWrite8 ((UINTN)&I2cRegs->I2cSr, CurrState | I2C_SR_IAL);
+        return EFI_NOT_READY;
+    }
+
+    if ((CurrState & (State >> 8)) == (UINT8)State) {
+      return CurrState;
+    }
+  }
+
+  return EFI_TIMEOUT;
+}
+
+/**
+  Function to transfer byte on i2c
+
+  @param   I2cRegs        Pointer to i2c registers
+  @param   Byte           Byte to be transferred on i2c bus
+
+  @retval  EFI_NOT_READY  Arbitration was lost
+  @retval  EFI_TIMEOUT    Timeout occured
+  @retval  EFI_NOT_FOUND  ACK was not recieved
+  @retval  EFI_SUCCESS    Data transfer was succesful
+
+**/
+STATIC
+EFI_STATUS
+TransferByte (
+  IN  I2C_REGS            *I2cRegs,
+  IN  UINT8               Byte
+  )
+{
+  EFI_STATUS              Ret;
+
+  MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
+  MmioWrite8 ((UINTN)&I2cRegs->I2cDr, Byte);
+
+  Ret = WaitForI2cState (I2cRegs, IIF);
+  if ((Ret == EFI_TIMEOUT) || (Ret == EFI_NOT_READY)) {
+    return Ret;
+  }
+
+  if (Ret & I2C_SR_RX_NO_AK) {
+    return EFI_NOT_FOUND;
+  }
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Function to stop transaction on i2c bus
+
+  @param   I2cRegs          Pointer to i2c registers
+
+  @retval  EFI_NOT_READY    Arbitration was lost
+  @retval  EFI_TIMEOUT      Timeout occured
+  @retval  EFI_SUCCESS      Stop operation was successful
+
+**/
+STATIC
+EFI_STATUS
+I2cStop (
+  IN  I2C_REGS             *I2cRegs
+  )
+{
+  INT32                    Ret;
+  UINT32                   Temp;
+
+  Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
+
+  Temp &= ~(I2C_CR_MSTA | I2C_CR_MTX);
+  MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
+
+  Ret = WaitForI2cState (I2cRegs, BUS_IDLE);
+
+  if (Ret < 0) {
+    return Ret;
+  } else {
+    return EFI_SUCCESS;
+  }
+}
+
+/**
+  Function to send start signal, Chip Address and
+  memory offset
+
+  @param   I2cRegs         Pointer to i2c base registers
+  @param   Chip            Chip Address
+  @param   Offset          Slave memory's offset
+  @param   Alen            length of chip address
+
+  @retval  EFI_NOT_READY   Arbitration lost
+  @retval  EFI_TIMEOUT     Failed to initialize data transfer in predefined time
+  @retval  EFI_NOT_FOUND   ACK was not recieved
+  @retval  EFI_SUCCESS     Read was successful
+
+**/
+STATIC
+EFI_STATUS
+InitTransfer (
+  IN  I2C_REGS             *I2cRegs,
+  IN  UINT8                Chip,
+  IN  UINT32               Offset,
+  IN  INT32                Alen
+  )
+{
+  UINT32                   Temp;
+  EFI_STATUS               Ret;
+
+  // Enable I2C controller
+  if (MmioRead8 ((UINTN)&I2cRegs->I2cCr) & I2C_CR_IDIS) {
+    MmioWrite8 ((UINTN)&I2cRegs->I2cCr, I2C_CR_IEN);
+  }
+
+  if (MmioRead8 ((UINTN)&I2cRegs->I2cAdr) == (Chip << 1)) {
+    MmioWrite8 ((UINTN)&I2cRegs->I2cAdr, (Chip << 1) ^ 2);
+  }
+
+  MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
+  Ret = WaitForI2cState (I2cRegs, BUS_IDLE);
+  if ((Ret == EFI_TIMEOUT) || (Ret == EFI_NOT_READY)) {
+    return Ret;
+  }
+
+  // Start I2C transaction
+  Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
+  // set to master mode
+  Temp |= I2C_CR_MSTA;
+  MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
+
+  Ret = WaitForI2cState (I2cRegs, BUS_BUSY);
+  if ((Ret == EFI_TIMEOUT) || (Ret == EFI_NOT_READY)) {
+    return Ret;
+  }
+
+  Temp |= I2C_CR_MTX | I2C_CR_TX_NO_AK;
+  MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
+
+  // write slave Address
+  Ret = TransferByte (I2cRegs, Chip << 1);
+  if (Ret != EFI_SUCCESS) {
+    return Ret;
+  }
+
+  if (Alen >= 0) {
+    while (Alen--) {
+      Ret = TransferByte (I2cRegs, (Offset >> (Alen * 8)) & 0xff);
+      if (Ret != EFI_SUCCESS)
+        return Ret;
+    }
+  }
+  return EFI_SUCCESS;
+}
+
+/**
+  Function to check if i2c bus is idle
+
+  @param   Base          Pointer to base address of I2c controller
+
+  @retval  EFI_SUCCESS
+
+**/
+STATIC
+INT32
+I2cBusIdle (
+  IN  VOID               *Base
+  )
+{
+  return EFI_SUCCESS;
+}
+
+/**
+  Function to initiate data transfer on i2c bus
+
+  @param   I2cRegs         Pointer to i2c base registers
+  @param   Chip            Chip Address
+  @param   Offset          Slave memory's offset
+  @param   Alen            length of chip address
+
+  @retval  EFI_NOT_READY   Arbitration lost
+  @retval  EFI_TIMEOUT     Failed to initialize data transfer in predefined time
+  @retval  EFI_NOT_FOUND   ACK was not recieved
+  @retval  EFI_SUCCESS     Read was successful
+
+**/
+STATIC
+EFI_STATUS
+InitDataTransfer (
+  IN  I2C_REGS             *I2cRegs,
+  IN  UINT8                Chip,
+  IN  UINT32               Offset,
+  IN  INT32                Alen
+  )
+{
+  EFI_STATUS               Status;
+  INT32                    Retry;
+
+  for (Retry = 0; Retry < 3; Retry++) {
+    Status = InitTransfer (I2cRegs, Chip, Offset, Alen);
+    if (Status == EFI_SUCCESS) {
+      return EFI_SUCCESS;
+    }
+
+    I2cStop (I2cRegs);
+
+    if (EFI_NOT_FOUND == Status) {
+      return Status;
+    }
+
+    // Disable controller
+    if (Status != EFI_NOT_READY) {
+      MmioWrite8 ((UINTN)&I2cRegs->I2cCr, I2C_CR_IDIS);
+    }
+
+    if (I2cBusIdle (I2cRegs) < 0) {
+      break;
+    }
+  }
+  return Status;
+}
+
+/**
+  Function to read data using i2c bus
+
+  @param   I2cBus          I2c Controller number
+  @param   Chip            Address of slave device from where data to be read
+  @param   Offset          Offset of slave memory
+  @param   Alen            Address length of slave
+  @param   Buffer          A pointer to the destination buffer for the data
+  @param   Len             Length of data to be read
+
+  @retval  EFI_NOT_READY   Arbitration lost
+  @retval  EFI_TIMEOUT     Failed to initialize data transfer in predefined time
+  @retval  EFI_NOT_FOUND   ACK was not recieved
+  @retval  EFI_SUCCESS     Read was successful
+
+**/
+STATIC
+EFI_STATUS
+I2cDataRead (
+  IN  UINT32               I2cBus,
+  IN  UINT8                Chip,
+  IN  UINT32               Offset,
+  IN  UINT32               Alen,
+  IN  UINT8                *Buffer,
+  IN  UINT32               Len
+  )
+{
+  EFI_STATUS               Status;
+  UINT32                   Temp;
+  INT32                    I;
+  I2C_REGS                 *I2cRegs;
+
+  I2cRegs = (I2C_REGS *)(FixedPcdGet64 (PcdI2c0BaseAddr +
+                         (I2cBus * FixedPcdGet32 (PcdI2cSize))));
+
+  Status = InitDataTransfer (I2cRegs, Chip, Offset, Alen);
+  if (Status != EFI_SUCCESS) {
+    return Status;
+  }
+
+  Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
+  Temp |= I2C_CR_RSTA;
+  MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
+
+  Status = TransferByte (I2cRegs, (Chip << 1) | 1);
+  if (Status != EFI_SUCCESS) {
+    I2cStop (I2cRegs);
+    return Status;
+  }
+
+  // setup bus to read data
+  Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
+  Temp &= ~(I2C_CR_MTX | I2C_CR_TX_NO_AK);
+  if (Len == 1) {
+    Temp |= I2C_CR_TX_NO_AK;
+  }
+
+  MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
+  MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
+
+  // Dummy Read to initiate recieve operation
+  MmioRead8 ((UINTN)&I2cRegs->I2cDr);
+
+  for (I = 0; I < Len; I++) {
+    Status = WaitForI2cState (I2cRegs, IIF);
+    if ((Status == EFI_TIMEOUT) || (Status == EFI_NOT_READY)) {
+       I2cStop (I2cRegs);
+       return Status;
+    }
+    //
+    // It must generate STOP before read I2DR to prevent
+    // controller from generating another clock cycle
+    //
+    if (I == (Len - 1)) {
+      I2cStop (I2cRegs);
+    } else if (I == (Len - 2)) {
+      Temp = MmioRead8 ((UINTN)&I2cRegs->I2cCr);
+      Temp |= I2C_CR_TX_NO_AK;
+      MmioWrite8 ((UINTN)&I2cRegs->I2cCr, Temp);
+    }
+    MmioWrite8 ((UINTN)&I2cRegs->I2cSr, I2C_SR_IIF_CLEAR);
+    Buffer[I] = MmioRead8 ((UINTN)&I2cRegs->I2cDr);
+  }
+
+  I2cStop (I2cRegs);
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Function to write data using i2c bus
+
+  @param   I2cBus          I2c Controller number
+  @param   Chip            Address of slave device where data to be written
+  @param   Offset          Offset of slave memory
+  @param   Alen            Address length of slave
+  @param   Buffer          A pointer to the source buffer for the data
+  @param   Len             Length of data to be write
+
+  @retval  EFI_NOT_READY   Arbitration lost
+  @retval  EFI_TIMEOUT     Failed to initialize data transfer in predefined time
+  @retval  EFI_NOT_FOUND   ACK was not recieved
+  @retval  EFI_SUCCESS     Read was successful
+
+**/
+STATIC
+EFI_STATUS
+I2cDataWrite (
+  IN  UINT32               I2cBus,
+  IN  UINT8                Chip,
+  IN  UINT32               Offset,
+  IN  INT32                Alen,
+  OUT UINT8                *Buffer,
+  IN  INT32                Len
+  )
+{
+  EFI_STATUS               Status;
+  I2C_REGS                 *I2cRegs;
+  INT32                    I;
+
+  I2cRegs = (I2C_REGS *)(FixedPcdGet64 (PcdI2c0BaseAddr +
+                         (I2cBus * FixedPcdGet32 (PcdI2cSize))));
+
+  Status = InitDataTransfer (I2cRegs, Chip, Offset, Alen);
+  if (Status != EFI_SUCCESS) {
+    return Status;
+  }
+
+  // Write operation
+  for (I = 0; I < Len; I++) {
+    Status = TransferByte (I2cRegs, Buffer[I]);
+    if (Status != EFI_SUCCESS) {
+      break;
+    }
+  }
+
+  I2cStop (I2cRegs);
+  return Status;
+}
+
+/**
+  Function to set i2c bus frequency
+
+  @param   This            Pointer to I2c master protocol
+  @param   BusClockHertz   value to be set
+
+  @retval EFI_SUCCESS      Operation successfull
+**/
+
+EFI_STATUS
+EFIAPI
+SetBusFrequency (
+  IN CONST EFI_I2C_MASTER_PROTOCOL   *This,
+  IN OUT UINTN                       *BusClockHertz
+ )
+{
+  I2C_REGS                 *I2cRegs;
+  UINT8                    ClkId;
+  UINT8                    SpeedId;
+
+  I2cRegs = (I2C_REGS *)(FixedPcdGet64 (PcdI2c0BaseAddr +
+                         (PcdGet32 (PcdI2cBus) * FixedPcdGet32 (PcdI2cSize))));
+
+  ClkId = GetClkDiv (*BusClockHertz);
+  SpeedId = ClkDiv[ClkId][1];
+
+  // Store divider value
+  MmioWrite8 ((UINTN)&I2cRegs->I2cFdr, SpeedId);
+
+  MemoryFence ();
+
+  return EFI_SUCCESS;
+}
+
+/**
+  Function to reset I2c Controller
+
+  @param  This             Pointer to I2c master protocol
+
+  @return EFI_SUCCESS      Operation successfull
+**/
+EFI_STATUS
+EFIAPI
+Reset (
+  IN CONST EFI_I2C_MASTER_PROTOCOL *This
+  )
+{
+  I2C_REGS                         *I2cRegs;
+
+  I2cRegs = (I2C_REGS *)(FixedPcdGet64 (PcdI2c0BaseAddr +
+                         (PcdGet32 (PcdI2cBus) * FixedPcdGet32 (PcdI2cSize))));
+
+  // Reset module
+  MmioWrite8 ((UINTN)&I2cRegs->I2cCr, I2C_CR_IDIS);
+  MmioWrite8 ((UINTN)&I2cRegs->I2cSr, 0);
+
+  MemoryFence ();
+
+  return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+StartRequest (
+  IN CONST EFI_I2C_MASTER_PROTOCOL *This,
+  IN UINTN                         SlaveAddress,
+  IN EFI_I2C_REQUEST_PACKET        *RequestPacket,
+  IN EFI_EVENT                     Event            OPTIONAL,
+  OUT EFI_STATUS                   *I2cStatus       OPTIONAL
+  )
+{
+  UINT32                           Count;
+  INT32                            Ret;
+  UINT32                           Length;
+  UINT8                            *Buffer;
+  UINT32                           Flag;
+  UINT32                           RegAddress;
+  UINT32                           OffsetLength;
+
+  RegAddress = 0;
+
+  if (RequestPacket->OperationCount <= 0) {
+    DEBUG ((DEBUG_ERROR,"%a: Operation count is not valid %d\n",
+           __FUNCTION__, RequestPacket->OperationCount));
+    return EFI_INVALID_PARAMETER;
+  }
+
+  OffsetLength = RequestPacket->Operation[0].LengthInBytes;
+  RegAddress = *RequestPacket->Operation[0].Buffer;
+
+  for (Count = 1; Count < RequestPacket->OperationCount; Count++) {
+    Flag = RequestPacket->Operation[Count].Flags;
+    Length = RequestPacket->Operation[Count].LengthInBytes;
+    Buffer = RequestPacket->Operation[Count].Buffer;
+
+    if (Length <= 0) {
+      DEBUG ((DEBUG_ERROR,"%a: Invalid length of buffer %d\n",
+             __FUNCTION__, Length));
+      return EFI_INVALID_PARAMETER;
+    }
+
+    if (Flag == I2C_FLAG_READ) {
+      Ret = I2cDataRead (PcdGet32 (PcdI2cBus), SlaveAddress,
+              RegAddress, OffsetLength, Buffer, Length);
+      if (Ret != EFI_SUCCESS) {
+        DEBUG ((DEBUG_ERROR,"%a: I2c read operation failed (error %d)\n",
+               __FUNCTION__, Ret));
+        return Ret;
+      }
+    } else if (Flag == I2C_FLAG_WRITE) {
+      Ret = I2cDataWrite (PcdGet32 (PcdI2cBus), SlaveAddress,
+              RegAddress, OffsetLength, Buffer, Length);
+      if (Ret != EFI_SUCCESS) {
+        DEBUG ((DEBUG_ERROR,"%a: I2c write operation failed (error %d)\n",
+               __FUNCTION__, Ret));
+        return Ret;
+      }
+    } else {
+      DEBUG ((DEBUG_ERROR,"%a: Invalid Flag %d\n",
+             __FUNCTION__, Flag));
+      return EFI_INVALID_PARAMETER;
+    }
+  }
+
+  return EFI_SUCCESS;
+}
+
+CONST EFI_I2C_CONTROLLER_CAPABILITIES I2cControllerCapabilities = {
+  0,
+  0,
+  0,
+  0
+};
+
+STATIC EFI_I2C_MASTER_PROTOCOL gI2c = {
+  ///
+  /// Set the clock frequency for the I2C bus.
+  ///
+  SetBusFrequency,
+  ///
+  /// Reset the I2C host controller.
+  ///
+  Reset,
+  ///
+  /// Start an I2C transaction in master mode on the host controller.
+  ///
+  StartRequest,
+  ///
+  /// Pointer to an EFI_I2C_CONTROLLER_CAPABILITIES data structure containing
+  /// the capabilities of the I2C host controller.
+  ///
+  &I2cControllerCapabilities
+};
+
+STATIC I2C_DEVICE_PATH gDevicePath = {
+  {
+    {
+      HARDWARE_DEVICE_PATH, HW_VENDOR_DP,
+      {
+        sizeof (VENDOR_DEVICE_PATH), 0
+      }
+    },
+    EFI_CALLER_ID_GUID
+  },
+  {
+    END_DEVICE_PATH_TYPE,
+    END_ENTIRE_DEVICE_PATH_SUBTYPE,
+    {
+      sizeof (EFI_DEVICE_PATH_PROTOCOL), 0
+    }
+  }
+};
+
+/**
+  The Entry Point for I2C driver.
+
+  @param[in] ImageHandle    The firmware allocated handle for the EFI image.
+  @param[in] SystemTable    A pointer to the EFI System Table.
+
+  @retval EFI_SUCCESS       The entry point is executed successfully.
+  @retval other             Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+I2cDxeEntryPoint (
+  IN EFI_HANDLE             ImageHandle,
+  IN EFI_SYSTEM_TABLE       *SystemTable
+  )
+{
+  EFI_STATUS                Status;
+
+  //
+  // Install I2c Master protocol on this controller
+  //
+  Status = gBS->InstallMultipleProtocolInterfaces (
+                &ImageHandle,
+                &gEfiI2cMasterProtocolGuid,
+                (VOID**)&gI2c,
+                &gEfiDevicePathProtocolGuid,
+                &gDevicePath,
+                NULL
+                );
+
+  ASSERT_EFI_ERROR (Status);
+
+  return Status;
+}
+
+/**
+  Unload function for the I2c Driver.
+
+  @param  ImageHandle[in]        The allocated handle for the EFI image
+
+  @retval EFI_SUCCESS            The driver was unloaded successfully
+  @retval EFI_INVALID_PARAMETER  ImageHandle is not a valid image handle.
+
+**/
+EFI_STATUS
+EFIAPI
+I2cDxeUnload (
+  IN EFI_HANDLE                  ImageHandle
+  )
+{
+  EFI_STATUS                     Status;
+  EFI_HANDLE                     *HandleBuffer;
+  UINTN                          HandleCount;
+  UINTN                          Index;
+
+  //
+  // Retrieve all I2c handles in the handle database
+  //
+  Status = gBS->LocateHandleBuffer (ByProtocol,
+                                    &gEfiI2cMasterProtocolGuid,
+                                    NULL,
+                                    &HandleCount,
+                                    &HandleBuffer);
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Disconnect the driver from the handles in the handle database
+  //
+  for (Index = 0; Index < HandleCount; Index++) {
+    Status = gBS->DisconnectController (HandleBuffer[Index],
+                                        gImageHandle,
+                                        NULL);
+  }
+
+  //
+  // Free the handle array
+  //
+  gBS->FreePool (HandleBuffer);
+
+  //
+  // Uninstall protocols installed by the driver in its entrypoint
+  //
+  Status = gBS->UninstallMultipleProtocolInterfaces (ImageHandle,
+                  &gEfiI2cMasterProtocolGuid, &gI2c,
+                  &gEfiDevicePathProtocolGuid, &gDevicePath,
+                  NULL);
+
+  return Status;
+}
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
new file mode 100644
index 0000000..4a562d3
--- /dev/null
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.h
@@ -0,0 +1,65 @@
+/** I2cDxe.h
+  Header defining the constant, base address amd function for I2C controller
+
+  Copyright 2017 NXP
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __I2C_DXE_H___
+#define __I2C_DXE_H__
+
+#include <Uefi.h>
+
+#define I2C_CR_IIEN           (1 << 6)
+#define I2C_CR_MSTA           (1 << 5)
+#define I2C_CR_MTX            (1 << 4)
+#define I2C_CR_TX_NO_AK       (1 << 3)
+#define I2C_CR_RSTA           (1 << 2)
+
+#define I2C_SR_ICF            (1 << 7)
+#define I2C_SR_IBB            (1 << 5)
+#define I2C_SR_IAL            (1 << 4)
+#define I2C_SR_IIF            (1 << 1)
+#define I2C_SR_RX_NO_AK       (1 << 0)
+
+#define I2C_CR_IEN            (0 << 7)
+#define I2C_CR_IDIS           (1 << 7)
+#define I2C_SR_IIF_CLEAR      (1 << 1)
+
+#define BUS_IDLE              (0 | (I2C_SR_IBB << 8))
+#define BUS_BUSY              (I2C_SR_IBB | (I2C_SR_IBB << 8))
+#define IIF                   (I2C_SR_IIF | (I2C_SR_IIF << 8))
+
+#define I2C_FLAG_WRITE        0x0
+
+typedef struct {
+  VENDOR_DEVICE_PATH        Guid;
+  EFI_DEVICE_PATH_PROTOCOL  End;
+} I2C_DEVICE_PATH;
+
+/**
+  Record defining i2c registers
+**/
+typedef struct {
+  UINT8     I2cAdr;
+  UINT8     I2cFdr;
+  UINT8     I2cCr;
+  UINT8     I2cSr;
+  UINT8     I2cDr;
+} I2C_REGS ;
+
+extern
+UINT64
+GetBusFrequency (
+  VOID
+  );
+
+#endif
diff --git a/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
new file mode 100644
index 0000000..ceb1b11
--- /dev/null
+++ b/Silicon/NXP/Drivers/I2cDxe/I2cDxe.inf
@@ -0,0 +1,55 @@
+#  @file
+#
+#  Component description file for I2c driver
+#
+#  Copyright (c) 2015, Freescale Semiconductor, Inc. All rights reserved.
+#  Copyright 2017 NXP
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution. The full text of the license may be found at
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+[Defines]
+  INF_VERSION                    = 0x0001001A
+  BASE_NAME                      = I2cDxe
+  FILE_GUID                      = 5f2927ba-1b04-4d5f-8bef-2b50c635d1e7
+  MODULE_TYPE                    = DXE_DRIVER
+  VERSION_STRING                 = 1.0
+  ENTRY_POINT                    = I2cDxeEntryPoint
+  UNLOAD                         = I2cDxeUnload
+
+[Sources.common]
+  I2cDxe.c
+
+[LibraryClasses]
+  ArmLib
+  IoLib
+  MemoryAllocationLib
+  PcdLib
+  SocLib
+  TimerLib
+  UefiDriverEntryPoint
+  UefiLib
+
+[Packages]
+  MdePkg/MdePkg.dec
+  Silicon/NXP/NxpQoriqLs.dec
+
+[Protocols]
+  gEfiI2cMasterProtocolGuid
+
+[Pcd]
+  gNxpQoriqLsTokenSpaceGuid.PcdI2cBus
+  gNxpQoriqLsTokenSpaceGuid.PcdI2cSpeed
+  gNxpQoriqLsTokenSpaceGuid.PcdI2c0BaseAddr
+  gNxpQoriqLsTokenSpaceGuid.PcdI2cSize
+  gNxpQoriqLsTokenSpaceGuid.PcdNumI2cController
+
+[Depex]
+  TRUE
-- 
1.9.1