* [platform][PATCH 1/4] Platform/Hisilicon/HiKey960: add gpio platform driver
2018-02-26 8:53 [platform][PATCH 0/4] enable virtual keyboard Haojian Zhuang
@ 2018-02-26 8:53 ` Haojian Zhuang
2018-02-26 8:53 ` [platform][PATCH 2/4] Platform/Hisilicon/HiKey960: enable virtual keyboard Haojian Zhuang
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Haojian Zhuang @ 2018-02-26 8:53 UTC (permalink / raw)
To: leif.lindholm, ard.biesheuvel, edk2-devel, linaro-uefi; +Cc: Haojian Zhuang
Add gpio platform driver to enable GPIO in HiKey960 platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/HiKey960/HiKey960.dsc | 1 +
Platform/Hisilicon/HiKey960/HiKey960.fdf | 1 +
.../HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c | 77 ++++++++++++++++++++++
.../HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf | 35 ++++++++++
4 files changed, 114 insertions(+)
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc
index 69c6c98..0316e2d 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.dsc
+++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc
@@ -182,6 +182,7 @@
#
# GPIO
#
+ Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf
index af10430..f67ed72 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.fdf
+++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf
@@ -357,6 +357,7 @@ READ_LOCK_STATUS = TRUE
#
# GPIO
#
+ INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
new file mode 100644
index 0000000..986fece
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
@@ -0,0 +1,77 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+
+GPIO_CONTROLLER gGpioDevice[]= {
+ { 0xe8a0b000, 0, 8 }, // GPIO0
+ { 0xe8a0c000, 8, 8 }, // GPIO1
+ { 0xe8a0d000, 16, 8 }, // GPIO2
+ { 0xe8a0e000, 24, 8 }, // GPIO3
+ { 0xe8a0f000, 32, 8 }, // GPIO4
+ { 0xe8a10000, 40, 8 }, // GPIO5
+ { 0xe8a11000, 48, 8 }, // GPIO6
+ { 0xe8a12000, 56, 8 }, // GPIO7
+ { 0xe8a13000, 64, 8 }, // GPIO8
+ { 0xe8a14000, 72, 8 }, // GPIO9
+ { 0xe8a15000, 80, 8 }, // GPIO10
+ { 0xe8a16000, 88, 8 }, // GPIO11
+ { 0xe8a17000, 96, 8 }, // GPIO12
+ { 0xe8a18000, 104, 8 }, // GPIO13
+ { 0xe8a19000, 112, 8 }, // GPIO14
+ { 0xe8a1a000, 120, 8 }, // GPIO15
+ { 0xe8a1b000, 128, 8 }, // GPIO16
+ { 0xe8a1c000, 136, 8 }, // GPIO17
+ { 0xff3b4000, 144, 8 }, // GPIO18
+ { 0xff3b5000, 152, 8 }, // GPIO19
+ { 0xe8a1f000, 160, 8 }, // GPIO20
+ { 0xe8a20000, 168, 8 }, // GPIO21
+ { 0xfff0b000, 176, 8 }, // GPIO22
+ { 0xfff0c000, 184, 8 }, // GPIO23
+ { 0xfff0d000, 192, 8 }, // GPIO24
+ { 0xfff0e000, 200, 8 }, // GPIO25
+ { 0xfff0f000, 208, 8 }, // GPIO26
+ { 0xfff10000, 216, 8 }, // GPIO27
+ { 0xfff1d000, 224, 8 }, // GPIO28
+};
+
+PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = {
+ 232, 29, gGpioDevice
+};
+
+EFI_STATUS
+EFIAPI
+HiKey960GpioEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ // Install the Embedded Platform GPIO Protocol onto a new handle
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gPlatformGpioProtocolGuid, &gPlatformGpioDevice,
+ NULL
+ );
+ if (EFI_ERROR(Status)) {
+ Status = EFI_OUT_OF_RESOURCES;
+ }
+
+ return Status;
+}
diff --git a/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
new file mode 100644
index 0000000..a16213f
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
@@ -0,0 +1,35 @@
+#
+# Copyright (c) 2018, Linaro. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = HiKey960GpioDxe
+ FILE_GUID = 6aa12592-7e36-4aec-acf8-2ac2fd13815c
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKey960GpioEntryPoint
+
+[Sources]
+ HiKey960GpioDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+
+[Protocols]
+ gPlatformGpioProtocolGuid
+
+[Depex]
+ TRUE
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [platform][PATCH 2/4] Platform/Hisilicon/HiKey960: enable virtual keyboard
2018-02-26 8:53 [platform][PATCH 0/4] enable virtual keyboard Haojian Zhuang
2018-02-26 8:53 ` [platform][PATCH 1/4] Platform/Hisilicon/HiKey960: add gpio platform driver Haojian Zhuang
@ 2018-02-26 8:53 ` Haojian Zhuang
2018-02-26 8:53 ` [platform][PATCH 3/4] Platform/Hisilicon/HiKey: add gpio platform driver Haojian Zhuang
2018-02-26 8:53 ` [platform][PATCH 4/4] Platform/Hisilicon/HiKey: enable virtual keyboard Haojian Zhuang
3 siblings, 0 replies; 5+ messages in thread
From: Haojian Zhuang @ 2018-02-26 8:53 UTC (permalink / raw)
To: leif.lindholm, ard.biesheuvel, edk2-devel, linaro-uefi; +Cc: Haojian Zhuang
Enable virtual keyboard on HiKey960 platform. The platform
driver read pattern from memory or GPIO pin. When the value
is matched, it simulates a hotkey that is used to adjust
sequence of boot options.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/HiKey960/HiKey960.dsc | 10 +
Platform/Hisilicon/HiKey960/HiKey960.fdf | 7 +
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 491 +++++++++++++++++++++
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 55 +++
Silicon/Hisilicon/Hi3660/Include/Hi3660.h | 147 ++++++
Silicon/Hisilicon/Hi3660/Include/Hkadc.h | 66 +++
6 files changed, 776 insertions(+)
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hi3660.h
create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hkadc.h
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc
index 0316e2d..082e12b 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.dsc
+++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc
@@ -68,6 +68,9 @@
PlatformPeiLib|ArmPlatformPkg/PlatformPei/PlatformPeiLib.inf
PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+[BuildOptions]
+ GCC:*_*_*_PLATFORM_FLAGS = -I$(WORKSPACE)/Silicon/Hisilicon/Hi3660/Include
+
################################################################################
#
# Pcd Section - list of all EDK II PCD Entries defined by this Platform
@@ -186,6 +189,13 @@
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
+ # Virtual Keyboard
+ #
+ EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
+ Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+
+ #
# USB Host Support
#
MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf
index f67ed72..fa8e145 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.fdf
+++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf
@@ -361,6 +361,13 @@ READ_LOCK_STATUS = TRUE
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
+ # Virtual Keyboard
+ #
+ INF EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
+ INF Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+
+ #
# USB Host Support
#
INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
new file mode 100644
index 0000000..473d61e
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
@@ -0,0 +1,491 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Guid/EventGroup.h>
+
+#include <Hi3660.h>
+#include <Hkadc.h>
+#include <libfdt.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/NonDiscoverableDeviceRegistrationLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PrintLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+#include <Protocol/PlatformVirtualKeyboard.h>
+
+#define ADC_ADCIN0 0
+#define ADC_ADCIN1 1
+#define ADC_ADCIN2 2
+
+#define HKADC_DATA_GRADE0 0
+#define HKADC_DATA_GRADE1 100
+#define HKADC_DATA_GRADE2 300
+#define HKADC_DATA_GRADE3 500
+#define HKADC_DATA_GRADE4 700
+#define HKADC_DATA_GRADE5 900
+#define HKADC_DATA_GRADE6 1100
+#define HKADC_DATA_GRADE7 1300
+#define HKADC_DATA_GRADE8 1500
+#define HKADC_DATA_GRADE9 1700
+#define HKADC_DATA_GRADE10 1800
+
+#define BOARDID_VALUE0 0
+#define BOARDID_VALUE1 1
+#define BOARDID_VALUE2 2
+#define BOARDID_VALUE3 3
+#define BOARDID_VALUE4 4
+#define BOARDID_VALUE5 5
+#define BOARDID_VALUE6 6
+#define BOARDID_VALUE7 7
+#define BOARDID_VALUE8 8
+#define BOARDID_VALUE9 9
+#define BOARDID_UNKNOW 0xF
+
+#define BOARDID3_BASE 5
+
+#define HIKEY960_BOARDID_V1 5300
+#define HIKEY960_BOARDID_V2 5301
+
+#define HIKEY960_COMPATIBLE_LEDS_V1 "gpio-leds_v1"
+#define HIKEY960_COMPATIBLE_LEDS_V2 "gpio-leds_v2"
+#define HIKEY960_COMPATIBLE_HUB_V1 "hisilicon,gpio_hubv1"
+#define HIKEY960_COMPATIBLE_HUB_V2 "hisilicon,gpio_hubv2"
+
+#define SERIAL_NUMBER_SIZE 17
+#define SERIAL_NUMBER_BLOCK_SIZE EFI_PAGE_SIZE
+#define SERIAL_NUMBER_LBA 20
+#define RANDOM_MAX 0x7FFFFFFFFFFFFFFF
+#define RANDOM_MAGIC 0x9A4DBEAF
+
+#define ADB_REBOOT_ADDRESS 0x32100000
+#define ADB_REBOOT_BOOTLOADER 0x77665500
+#define ADB_REBOOT_NONE 0x77665501
+
+#define DETECT_SW_FASTBOOT 68 // GPIO8_4
+
+typedef struct {
+ UINT64 Magic;
+ UINT64 Data;
+ CHAR16 UnicodeSN[SERIAL_NUMBER_SIZE];
+} RANDOM_SERIAL_NUMBER;
+
+enum {
+ BOOT_MODE_RECOVERY = 0,
+ BOOT_MODE_NORMAL,
+ BOOT_MODE_MASK = 1,
+};
+
+STATIC UINTN mBoardId;
+
+STATIC EMBEDDED_GPIO *mGpio;
+
+STATIC
+VOID
+InitAdc (
+ VOID
+ )
+{
+ // reset hkadc
+ MmioWrite32 (CRG_PERRSTEN2, PERRSTEN2_HKADCSSI);
+ // wait a few clock cycles
+ MicroSecondDelay (2);
+ MmioWrite32 (CRG_PERRSTDIS2, PERRSTEN2_HKADCSSI);
+ MicroSecondDelay (2);
+ // enable hkadc clock
+ MmioWrite32 (CRG_PERDIS2, PEREN2_HKADCSSI);
+ MicroSecondDelay (2);
+ MmioWrite32 (CRG_PEREN2, PEREN2_HKADCSSI);
+ MicroSecondDelay (2);
+}
+
+STATIC
+EFI_STATUS
+AdcGetAdc (
+ IN UINTN Channel,
+ OUT UINTN *Value
+ )
+{
+ UINT32 Data;
+ UINT16 Value1, Value0;
+
+ if (Channel > HKADC_CHANNEL_MAX) {
+ DEBUG ((DEBUG_ERROR, "invalid channel:%d\n", Channel));
+ return EFI_OUT_OF_RESOURCES;
+ }
+ // configure the read/write operation for external HKADC
+ MmioWrite32 (HKADC_WR01_DATA, HKADC_WR01_VALUE | Channel);
+ MmioWrite32 (HKADC_WR23_DATA, HKADC_WR23_VALUE);
+ MmioWrite32 (HKADC_WR45_DATA, HKADC_WR45_VALUE);
+ // configure the number of accessing registers
+ MmioWrite32 (HKADC_WR_NUM, HKADC_WR_NUM_VALUE);
+ // configure delay of accessing registers
+ MmioWrite32 (HKADC_DELAY01, HKADC_CHANNEL0_DELAY01_VALUE);
+ MmioWrite32 (HKADC_DELAY23, HKADC_DELAY23_VALUE);
+
+ // start HKADC
+ MmioWrite32 (HKADC_DSP_START, 1);
+ do {
+ Data = MmioRead32 (HKADC_DSP_START);
+ } while (Data & 1);
+
+ // convert AD result
+ Value1 = (UINT16)MmioRead32 (HKADC_DSP_RD2_DATA);
+ Value0 = (UINT16)MmioRead32 (HKADC_DSP_RD3_DATA);
+
+ Data = ((Value1 << 4) & HKADC_VALUE_HIGH) | ((Value0 >> 4) & HKADC_VALUE_LOW);
+ *Value = Data;
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+AdcGetValue (
+ IN UINTN Channel,
+ IN OUT UINTN *Value
+ )
+{
+ EFI_STATUS Status;
+ UINTN Result;
+
+ Status = AdcGetAdc (Channel, Value);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // convert ADC value to micro-volt
+ Result = ((*Value & HKADC_VALID_VALUE) * HKADC_VREF_1V8) / HKADC_ACCURACY;
+ *Value = Result;
+ return EFI_SUCCESS;
+}
+
+STATIC
+UINTN
+AdcinDataRemap (
+ IN UINTN AdcinValue
+ )
+{
+ UINTN Result;
+
+ if (AdcinValue < HKADC_DATA_GRADE0) {
+ Result = BOARDID_UNKNOW;
+ } else if (AdcinValue < HKADC_DATA_GRADE1) {
+ Result = BOARDID_VALUE0;
+ } else if (AdcinValue < HKADC_DATA_GRADE2) {
+ Result = BOARDID_VALUE1;
+ } else if (AdcinValue < HKADC_DATA_GRADE3) {
+ Result = BOARDID_VALUE2;
+ } else if (AdcinValue < HKADC_DATA_GRADE4) {
+ Result = BOARDID_VALUE3;
+ } else if (AdcinValue < HKADC_DATA_GRADE5) {
+ Result = BOARDID_VALUE4;
+ } else if (AdcinValue < HKADC_DATA_GRADE6) {
+ Result = BOARDID_VALUE5;
+ } else if (AdcinValue < HKADC_DATA_GRADE7) {
+ Result = BOARDID_VALUE6;
+ } else if (AdcinValue < HKADC_DATA_GRADE8) {
+ Result = BOARDID_VALUE7;
+ } else if (AdcinValue < HKADC_DATA_GRADE9) {
+ Result = BOARDID_VALUE8;
+ } else if (AdcinValue < HKADC_DATA_GRADE10) {
+ Result = BOARDID_VALUE9;
+ } else {
+ Result = BOARDID_UNKNOW;
+ }
+ return Result;
+}
+
+STATIC
+EFI_STATUS
+InitBoardId (
+ OUT UINTN *Id
+ )
+{
+ UINTN Adcin0, Adcin1, Adcin2;
+ UINTN Adcin0Remap, Adcin1Remap, Adcin2Remap;
+
+ InitAdc ();
+
+ // read ADC channel0 data
+ AdcGetValue (ADC_ADCIN0, &Adcin0);
+ DEBUG ((DEBUG_INFO, "[BDID]Adcin0:%d\n", Adcin0));
+ Adcin0Remap = AdcinDataRemap (Adcin0);
+ DEBUG ((DEBUG_INFO, "[BDID]Adcin0Remap:%d\n", Adcin0Remap));
+ if (Adcin0Remap == BOARDID_UNKNOW) {
+ return EFI_INVALID_PARAMETER;
+ }
+ // read ADC channel1 data
+ AdcGetValue (ADC_ADCIN1, &Adcin1);
+ DEBUG ((DEBUG_INFO, "[BDID]Adcin1:%d\n", Adcin1));
+ Adcin1Remap = AdcinDataRemap (Adcin1);
+ DEBUG ((DEBUG_INFO, "[BDID]Adcin1Remap:%d\n", Adcin1Remap));
+ if (Adcin1Remap == BOARDID_UNKNOW) {
+ return EFI_INVALID_PARAMETER;
+ }
+ // read ADC channel2 data
+ AdcGetValue (ADC_ADCIN2, &Adcin2);
+ DEBUG ((DEBUG_INFO, "[BDID]Adcin2:%d\n", Adcin2));
+ Adcin2Remap = AdcinDataRemap (Adcin2);
+ DEBUG ((DEBUG_INFO, "[BDID]Adcin2Remap:%d\n", Adcin2Remap));
+ if (Adcin2Remap == BOARDID_UNKNOW) {
+ return EFI_INVALID_PARAMETER;
+ }
+ *Id = BOARDID3_BASE * 1000 + (Adcin2Remap * 100) + (Adcin1Remap * 10) + Adcin0Remap;
+ DEBUG ((DEBUG_INFO, "[BDID]boardid: %d\n", *Id));
+ return EFI_SUCCESS;
+}
+
+STATIC
+VOID
+InitSdCard (
+ IN VOID
+ )
+{
+ UINT32 Data;
+
+ // LDO16
+ Data = MmioRead32 (PMU_REG_BASE + (0x79 << 2)) & 7;
+ Data |= 6;
+ MmioWrite32 (PMU_REG_BASE + (0x79 << 2), Data);
+ MmioOr32 (PMU_REG_BASE + (0x78 << 2), 2);
+ MicroSecondDelay (100);
+
+ // LDO9
+ Data = MmioRead32 (PMU_REG_BASE + (0x6b << 2)) & 7;
+ Data |= 5;
+ MmioWrite32 (PMU_REG_BASE + (0x6b << 2), Data);
+ MmioOr32 (PMU_REG_BASE + (0x6a << 2), 2);
+ MicroSecondDelay (100);
+
+ // GPIO203
+ MmioWrite32 (0xfff11000 + (24 << 2), 0); // GPIO function
+
+ // SD pinmux
+ MmioWrite32 (0xff37e000 + 0x0, 1); // SD_CLK
+ MmioWrite32 (0xff37e000 + 0x4, 1); // SD_CMD
+ MmioWrite32 (0xff37e000 + 0x8, 1); // SD_DATA0
+ MmioWrite32 (0xff37e000 + 0xc, 1); // SD_DATA1
+ MmioWrite32 (0xff37e000 + 0x10, 1); // SD_DATA2
+ MmioWrite32 (0xff37e000 + 0x14, 1); // SD_DATA3
+ MmioWrite32 (0xff37e800 + 0x0, 15 << 4); // SD_CLK float with 32mA
+ MmioWrite32 (0xff37e800 + 0x4, (1 << 0) | (8 << 4)); // SD_CMD
+ MmioWrite32 (0xff37e800 + 0x8, (1 << 0) | (8 << 4)); // SD_DATA0
+ MmioWrite32 (0xff37e800 + 0xc, (1 << 0) | (8 << 4)); // SD_DATA1
+ MmioWrite32 (0xff37e800 + 0x10, (1 << 0) | (8 << 4)); // SD_DATA2
+ MmioWrite32 (0xff37e800 + 0x14, (1 << 0) | (8 << 4)); // SD_DATA3
+
+ do {
+ MmioOr32 (CRG_REG_BASE + 0xb8, (1 << 6) | (1 << 6 << 16) | (0 << 4) | (3 << 4 << 16));
+ Data = MmioRead32 (CRG_REG_BASE + 0xb8);
+ } while ((Data & ((1 << 6) | (3 << 4))) != ((1 << 6) | (0 << 4)));
+
+ // Unreset SD controller
+ MmioWrite32 (CRG_PERRSTDIS4, 1 << 18);
+ do {
+ Data = MmioRead32 (CRG_PERRSTSTAT4);
+ } while ((Data & (1 << 18)) == (1 << 18));
+ // Enable SD controller clock
+ MmioOr32 (CRG_REG_BASE + 0, 1 << 30);
+ MmioOr32 (CRG_REG_BASE + 0x40, 1 << 17);
+ do {
+ Data = MmioRead32 (CRG_REG_BASE + 0x48);
+ } while ((Data & (1 << 17)) != (1 << 17));
+}
+
+VOID
+InitPeripherals (
+ IN VOID
+ )
+{
+ // Enable FPLL0
+ MmioOr32 (SCTRL_SCFPLLCTRL0, SCTRL_SCFPLLCTRL0_FPLL0_EN);
+
+ InitSdCard ();
+
+ // Enable wifi clock
+ MmioOr32 (PMIC_HARDWARE_CTRL0, PMIC_HARDWARE_CTRL0_WIFI_CLK);
+ MmioOr32 (PMIC_OSC32K_ONOFF_CTRL, PMIC_OSC32K_ONOFF_CTRL_EN_32K);
+}
+
+/**
+ Notification function of the event defined as belonging to the
+ EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in
+ the entry point of the driver.
+
+ This function is called when an event belonging to the
+ EFI_END_OF_DXE_EVENT_GROUP_GUID event group is signalled. Such an
+ event is signalled once at the end of the dispatching of all
+ drivers (end of the so called DXE phase).
+
+ @param[in] Event Event declared in the entry point of the driver whose
+ notification function is being invoked.
+ @param[in] Context NULL
+**/
+STATIC
+VOID
+OnEndOfDxe (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ UINT32 BootMode;
+
+ BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK;
+ if (BootMode == BOOT_MODE_RECOVERY) {
+ SerialPortWrite ((UINT8 *)"WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\r\n", 48);
+ SerialPortWrite ((UINT8 *)"Switch to normal boot mode, then reboot to boot kernel.\r\n", 57);
+ }
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardRegister (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (
+ &gEmbeddedGpioProtocolGuid,
+ NULL,
+ (VOID **) &mGpio
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardReset (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ if (mGpio == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ // Configure GPIO68 as GPIO function
+ MmioWrite32 (0xe896c108, 0);
+ Status = mGpio->Set (mGpio, DETECT_SW_FASTBOOT, GPIO_MODE_INPUT);
+ return Status;
+}
+
+BOOLEAN
+EFIAPI
+VirtualKeyboardQuery (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ EFI_STATUS Status;
+ UINTN Value = 0;
+
+ if ((VirtualKey == NULL) || (mGpio == NULL)) {
+ return FALSE;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ goto Done;
+ } else {
+ Status = mGpio->Get (mGpio, DETECT_SW_FASTBOOT, &Value);
+ if (EFI_ERROR (Status) || (Value != 0)) {
+ return FALSE;
+ }
+ }
+Done:
+ VirtualKey->Signature = VIRTUAL_KEYBOARD_KEY_SIGNATURE;
+ VirtualKey->Key.ScanCode = SCAN_NULL;
+ VirtualKey->Key.UnicodeChar = L'f';
+ return TRUE;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardClear (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ if (VirtualKey == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ MmioWrite32 (ADB_REBOOT_ADDRESS, ADB_REBOOT_NONE);
+ WriteBackInvalidateDataCacheRange ((VOID *)ADB_REBOOT_ADDRESS, 4);
+ }
+ return EFI_SUCCESS;
+}
+
+PLATFORM_VIRTUAL_KBD_PROTOCOL mVirtualKeyboard = {
+ VirtualKeyboardRegister,
+ VirtualKeyboardReset,
+ VirtualKeyboardQuery,
+ VirtualKeyboardClear
+};
+
+EFI_STATUS
+EFIAPI
+HiKey960EntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT EndOfDxeEvent;
+
+ Status = InitBoardId (&mBoardId);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ InitPeripherals ();
+
+ //
+ // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group.
+ // The "OnEndOfDxe()" function is declared as the call back function.
+ // It will be called at the end of the DXE phase when an event of the
+ // same group is signalled to inform about the end of the DXE phase.
+ // Install the INSTALL_FDT_PROTOCOL protocol.
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ OnEndOfDxe,
+ NULL,
+ &gEfiEndOfDxeEventGroupGuid,
+ &EndOfDxeEvent
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gPlatformVirtualKeyboardProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &mVirtualKeyboard
+ );
+ return Status;
+}
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
new file mode 100644
index 0000000..41fab65
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
@@ -0,0 +1,55 @@
+#
+# Copyright (c) 2018, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = HiKey960Dxe
+ FILE_GUID = 6d824b2c-640e-4643-b9f2-9c09e8bff429
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKey960EntryPoint
+
+[Sources.common]
+ HiKey960Dxe.c
+
+[Packages]
+ EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ BaseMemoryLib
+ CacheMaintenanceLib
+ DebugLib
+ DxeServicesTableLib
+ FdtLib
+ IoLib
+ PcdLib
+ PrintLib
+ SerialPortLib
+ TimerLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ UefiLib
+ UefiRuntimeServicesTableLib
+
+[Protocols]
+ gEmbeddedGpioProtocolGuid
+ gPlatformVirtualKeyboardProtocolGuid
+
+[Guids]
+ gEfiEndOfDxeEventGroupGuid
+ gEfiFileInfoGuid
+
+[Depex]
+ TRUE
diff --git a/Silicon/Hisilicon/Hi3660/Include/Hi3660.h b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h
new file mode 100644
index 0000000..f3ce12f
--- /dev/null
+++ b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h
@@ -0,0 +1,147 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HI3660_H__
+#define __HI3660_H__
+
+#define HKADC_SSI_REG_BASE 0xE82B8000
+
+#define PCTRL_REG_BASE 0xE8A09000
+
+#define PCTRL_CTRL3 (PCTRL_REG_BASE + 0x010)
+#define PCTRL_CTRL24 (PCTRL_REG_BASE + 0x064)
+
+#define PCTRL_CTRL3_USB_TXCO_EN (1 << 1)
+#define PCTRL_CTRL24_USB3PHY_3MUX1_SEL (1 << 25)
+
+#define SCTRL_REG_BASE 0xFFF0A000
+
+#define SCTRL_SCFPLLCTRL0 (SCTRL_REG_BASE + 0x120)
+#define SCTRL_SCFPLLCTRL0_FPLL0_EN (1 << 0)
+
+#define SCTRL_BAK_DATA0 (SCTRL_REG_BASE + 0x40C)
+
+#define USB3OTG_BC_REG_BASE 0xFF200000
+
+#define USB3OTG_CTRL0 (USB3OTG_BC_REG_BASE + 0x000)
+#define USB3OTG_CTRL2 (USB3OTG_BC_REG_BASE + 0x008)
+#define USB3OTG_CTRL3 (USB3OTG_BC_REG_BASE + 0x00C)
+#define USB3OTG_CTRL4 (USB3OTG_BC_REG_BASE + 0x010)
+#define USB3OTG_CTRL6 (USB3OTG_BC_REG_BASE + 0x018)
+#define USB3OTG_CTRL7 (USB3OTG_BC_REG_BASE + 0x01C)
+#define USB3OTG_PHY_CR_STS (USB3OTG_BC_REG_BASE + 0x050)
+#define USB3OTG_PHY_CR_CTRL (USB3OTG_BC_REG_BASE + 0x054)
+
+#define USB3OTG_CTRL0_SC_USB3PHY_ABB_GT_EN (1 << 15)
+#define USB3OTG_CTRL2_TEST_POWERDOWN_SSP (1 << 1)
+#define USB3OTG_CTRL2_TEST_POWERDOWN_HSP (1 << 0)
+#define USB3OTG_CTRL3_VBUSVLDEXT (1 << 6)
+#define USB3OTG_CTRL3_VBUSVLDEXTSEL (1 << 5)
+#define USB3OTG_CTRL7_REF_SSP_EN (1 << 16)
+#define USB3OTG_PHY_CR_DATA_OUT(x) (((x) & 0xFFFF) << 1)
+#define USB3OTG_PHY_CR_ACK (1 << 0)
+#define USB3OTG_PHY_CR_DATA_IN(x) (((x) & 0xFFFF) << 4)
+#define USB3OTG_PHY_CR_WRITE (1 << 3)
+#define USB3OTG_PHY_CR_READ (1 << 2)
+#define USB3OTG_PHY_CR_CAP_DATA (1 << 1)
+#define USB3OTG_PHY_CR_CAP_ADDR (1 << 0)
+
+#define PMU_REG_BASE 0xFFF34000
+#define PMIC_HARDWARE_CTRL0 (PMU_REG_BASE + (0x0C5 << 2))
+#define PMIC_OSC32K_ONOFF_CTRL (PMU_REG_BASE + (0x0CC << 2))
+
+#define PMIC_HARDWARE_CTRL0_WIFI_CLK (1 << 5)
+#define PMIC_OSC32K_ONOFF_CTRL_EN_32K (1 << 1)
+
+
+#define CRG_REG_BASE 0xFFF35000
+
+#define CRG_PEREN2 (CRG_REG_BASE + 0x020)
+#define CRG_PERDIS2 (CRG_REG_BASE + 0x024)
+#define CRG_PERCLKEN2 (CRG_REG_BASE + 0x028)
+#define CRG_PERSTAT2 (CRG_REG_BASE + 0x02C)
+#define CRG_PEREN4 (CRG_REG_BASE + 0x040)
+#define CRG_PERDIS4 (CRG_REG_BASE + 0x044)
+#define CRG_PERCLKEN4 (CRG_REG_BASE + 0x048)
+#define CRG_PERSTAT4 (CRG_REG_BASE + 0x04C)
+#define CRG_PERRSTEN2 (CRG_REG_BASE + 0x078)
+#define CRG_PERRSTDIS2 (CRG_REG_BASE + 0x07C)
+#define CRG_PERRSTSTAT2 (CRG_REG_BASE + 0x080)
+#define CRG_PERRSTEN3 (CRG_REG_BASE + 0x084)
+#define CRG_PERRSTDIS3 (CRG_REG_BASE + 0x088)
+#define CRG_PERRSTSTAT3 (CRG_REG_BASE + 0x08C)
+#define CRG_PERRSTEN4 (CRG_REG_BASE + 0x090)
+#define CRG_PERRSTDIS4 (CRG_REG_BASE + 0x094)
+#define CRG_PERRSTSTAT4 (CRG_REG_BASE + 0x098)
+#define CRG_ISOEN (CRG_REG_BASE + 0x144)
+#define CRG_ISODIS (CRG_REG_BASE + 0x148)
+#define CRG_ISOSTAT (CRG_REG_BASE + 0x14C)
+
+#define PERI_UFS_BIT (1 << 12)
+#define PERI_ARST_UFS_BIT (1 << 7)
+
+#define PEREN2_HKADCSSI BIT24
+
+#define PEREN4_GT_ACLK_USB3OTG (1 << 1)
+#define PEREN4_GT_CLK_USB3OTG_REF (1 << 0)
+
+#define PERRSTEN2_HKADCSSI BIT24
+
+#define PERRSTEN4_USB3OTG_MUX (1 << 8)
+#define PERRSTEN4_USB3OTG_AHBIF (1 << 7)
+#define PERRSTEN4_USB3OTG_32K (1 << 6)
+#define PERRSTEN4_USB3OTG (1 << 5)
+#define PERRSTEN4_USB3OTGPHY_POR (1 << 3)
+
+#define PERISOEN_USB_REFCLK_ISO_EN (1 << 25)
+
+#define CRG_CLKDIV16_OFFSET 0x0E8
+#define SC_DIV_UFSPHY_CFG_MASK (0x3 << 9)
+#define SC_DIV_UFSPHY_CFG(x) (((x) & 0x3) << 9)
+
+#define CRG_CLKDIV17_OFFSET 0x0EC
+#define SC_DIV_UFS_PERIBUS (1 << 14)
+
+#define UFS_SYS_REG_BASE 0xFF3B1000
+
+#define UFS_SYS_PSW_POWER_CTRL_OFFSET 0x004
+#define UFS_SYS_PHY_ISO_EN_OFFSET 0x008
+#define UFS_SYS_HC_LP_CTRL_OFFSET 0x00C
+#define UFS_SYS_PHY_CLK_CTRL_OFFSET 0x010
+#define UFS_SYS_PSW_CLK_CTRL_OFFSET 0x014
+#define UFS_SYS_CLOCK_GATE_BYPASS_OFFSET 0x018
+#define UFS_SYS_RESET_CTRL_EN_OFFSET 0x01C
+#define UFS_SYS_MONITOR_HH_OFFSET 0x03C
+#define UFS_SYS_UFS_SYSCTRL_OFFSET 0x05C
+#define UFS_SYS_UFS_DEVICE_RESET_CTRL_OFFSET 0x060
+#define UFS_SYS_UFS_APB_ADDR_MASK_OFFSET 0x064
+
+#define BIT_UFS_PSW_ISO_CTRL (1 << 16)
+#define BIT_UFS_PSW_MTCMOS_EN (1 << 0)
+#define BIT_UFS_REFCLK_ISO_EN (1 << 16)
+#define BIT_UFS_PHY_ISO_CTRL (1 << 0)
+#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16)
+#define BIT_SYSCTRL_PWR_READY (1 << 8)
+#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24)
+#define MASK_SYSCTRL_REF_CLOCK_SEL (3 << 8)
+#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF)
+#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4)
+#define MASK_UFS_CLK_GATE_BYPASS (0x3F)
+#define BIT_SYSCTRL_LP_RESET_N (1 << 0)
+#define BIT_UFS_REFCLK_SRC_SE1 (1 << 0)
+#define MASK_UFS_SYSCTRL_BYPASS (0x3F << 16)
+#define MASK_UFS_DEVICE_RESET (1 << 16)
+#define BIT_UFS_DEVICE_RESET (1 << 0)
+
+#endif /* __HI3660_H__ */
diff --git a/Silicon/Hisilicon/Hi3660/Include/Hkadc.h b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h
new file mode 100644
index 0000000..2584256
--- /dev/null
+++ b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h
@@ -0,0 +1,66 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HKADC_H__
+#define __HKADC_H__
+
+#include <Hi3660.h>
+
+#define HKADC_DSP_START (HKADC_SSI_REG_BASE + 0x000)
+#define HKADC_WR_NUM (HKADC_SSI_REG_BASE + 0x008)
+#define HKADC_DSP_START_CLR (HKADC_SSI_REG_BASE + 0x01C)
+#define HKADC_WR01_DATA (HKADC_SSI_REG_BASE + 0x020)
+
+#define WR1_WRITE_MODE BIT31
+#define WR1_READ_MODE (0 << 31)
+#define WR1_ADDR(x) (((x) & 0x7F) << 24)
+#define WR1_DATA(x) (((x) & 0xFF) << 16)
+#define WR0_WRITE_MODE BIT15
+#define WR0_READ_MODE (0 << 15)
+#define WR0_ADDR(x) (((x) & 0x7F) << 8)
+#define WR0_DATA(x) ((x) & 0xFF)
+
+#define HKADC_WR23_DATA (HKADC_SSI_REG_BASE + 0x024)
+#define HKADC_WR45_DATA (HKADC_SSI_REG_BASE + 0x028)
+#define HKADC_DELAY01 (HKADC_SSI_REG_BASE + 0x030)
+#define HKADC_DELAY23 (HKADC_SSI_REG_BASE + 0x034)
+#define HKADC_DELAY45 (HKADC_SSI_REG_BASE + 0x038)
+#define HKADC_DSP_RD2_DATA (HKADC_SSI_REG_BASE + 0x048)
+#define HKADC_DSP_RD3_DATA (HKADC_SSI_REG_BASE + 0x04C)
+
+// HKADC Internal Registers
+#define HKADC_CTRL_ADDR 0x00
+#define HKADC_START_ADDR 0x01
+#define HKADC_DATA1_ADDR 0x03 // high 8 bits
+#define HKADC_DATA0_ADDR 0x04 // low 8 bits
+#define HKADC_MODE_CFG 0x0A
+
+#define HKADC_VALUE_HIGH 0x0FF0
+#define HKADC_VALUE_LOW 0x000F
+#define HKADC_VALID_VALUE 0x0FFF
+
+#define HKADC_CHANNEL_MAX 15
+#define HKADC_VREF_1V8 1800
+#define HKADC_ACCURACY 0x0FFF
+
+#define HKADC_WR01_VALUE ((HKADC_START_ADDR << 24) | (0x1 << 16))
+#define HKADC_WR23_VALUE ((0x1 << 31) | (HKADC_DATA0_ADDR << 24) | (1 << 15) | (HKADC_DATA1_ADDR << 8))
+#define HKADC_WR45_VALUE (0x80)
+#define HKADC_CHANNEL0_DELAY01_VALUE ((0x0700 << 16) | 0xFFFF)
+#define HKADC_DELAY01_VALUE ((0x0700 << 16) | 0x0200)
+#define HKADC_DELAY23_VALUE ((0x00C8 << 16) | 0x00C8)
+#define START_DELAY_TIMEOUT 2000
+#define HKADC_WR_NUM_VALUE 4
+
+#endif /* __HKADC_H__ */
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [platform][PATCH 3/4] Platform/Hisilicon/HiKey: add gpio platform driver
2018-02-26 8:53 [platform][PATCH 0/4] enable virtual keyboard Haojian Zhuang
2018-02-26 8:53 ` [platform][PATCH 1/4] Platform/Hisilicon/HiKey960: add gpio platform driver Haojian Zhuang
2018-02-26 8:53 ` [platform][PATCH 2/4] Platform/Hisilicon/HiKey960: enable virtual keyboard Haojian Zhuang
@ 2018-02-26 8:53 ` Haojian Zhuang
2018-02-26 8:53 ` [platform][PATCH 4/4] Platform/Hisilicon/HiKey: enable virtual keyboard Haojian Zhuang
3 siblings, 0 replies; 5+ messages in thread
From: Haojian Zhuang @ 2018-02-26 8:53 UTC (permalink / raw)
To: leif.lindholm, ard.biesheuvel, edk2-devel, linaro-uefi; +Cc: Haojian Zhuang
Add gpio platform driver to enable GPIO in HiKey platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
.../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c | 68 ++++++++++++++++++++++
.../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf | 36 ++++++++++++
2 files changed, 104 insertions(+)
create mode 100644 Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c
create mode 100644 Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
diff --git a/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c
new file mode 100644
index 0000000..543f65d
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c
@@ -0,0 +1,68 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+
+GPIO_CONTROLLER gGpioDevice[]= {
+ { 0xf8011000, 0, 8 }, // GPIO0
+ { 0xf8012000, 8, 8 }, // GPIO1
+ { 0xf8013000, 16, 8 }, // GPIO2
+ { 0xf8014000, 24, 8 }, // GPIO3
+ { 0xf7020000, 32, 8 }, // GPIO4
+ { 0xf7021000, 40, 8 }, // GPIO5
+ { 0xf7022000, 48, 8 }, // GPIO6
+ { 0xf7023000, 56, 8 }, // GPIO7
+ { 0xf7024000, 64, 8 }, // GPIO8
+ { 0xf7025000, 72, 8 }, // GPIO9
+ { 0xf7026000, 80, 8 }, // GPIO10
+ { 0xf7027000, 88, 8 }, // GPIO11
+ { 0xf7028000, 96, 8 }, // GPIO12
+ { 0xf7029000, 104, 8 }, // GPIO13
+ { 0xf702a000, 112, 8 }, // GPIO14
+ { 0xf702b000, 120, 8 }, // GPIO15
+ { 0xf702c000, 128, 8 }, // GPIO16
+ { 0xf702d000, 136, 8 }, // GPIO17
+ { 0xf702e000, 144, 8 }, // GPIO18
+ { 0xf702f000, 152, 8 } // GPIO19
+};
+
+PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = {
+ 160, 20, gGpioDevice
+};
+
+EFI_STATUS
+EFIAPI
+HiKeyGpioEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ // Install the Embedded Platform GPIO Protocol onto a new handle
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gPlatformGpioProtocolGuid, &gPlatformGpioDevice,
+ NULL
+ );
+ if (EFI_ERROR(Status)) {
+ Status = EFI_OUT_OF_RESOURCES;
+ }
+
+ return Status;
+}
diff --git a/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
new file mode 100644
index 0000000..272ed1c
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
@@ -0,0 +1,36 @@
+#
+# Copyright (c) 2018, Linaro. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = HiKeyGpio
+ FILE_GUID = b51a851c-7bf7-463f-b261-cfb158b7f699
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKeyGpioEntryPoint
+
+[Sources.common]
+ HiKeyGpioDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gPlatformGpioProtocolGuid
+
+[Depex]
+ TRUE
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [platform][PATCH 4/4] Platform/Hisilicon/HiKey: enable virtual keyboard
2018-02-26 8:53 [platform][PATCH 0/4] enable virtual keyboard Haojian Zhuang
` (2 preceding siblings ...)
2018-02-26 8:53 ` [platform][PATCH 3/4] Platform/Hisilicon/HiKey: add gpio platform driver Haojian Zhuang
@ 2018-02-26 8:53 ` Haojian Zhuang
3 siblings, 0 replies; 5+ messages in thread
From: Haojian Zhuang @ 2018-02-26 8:53 UTC (permalink / raw)
To: leif.lindholm, ard.biesheuvel, edk2-devel, linaro-uefi; +Cc: Haojian Zhuang
Enable virtual keyboard driver on HiKey platform. The platform
driver reads pattern from memory or GPIO pin. When the value
is matched, it simulates a key value that is used to adjust
the sequence of boot options.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/HiKey/HiKey.dsc | 8 +
Platform/Hisilicon/HiKey/HiKey.fdf | 8 +
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c | 229 ++++++++++++++++++++++
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf | 58 ++++++
Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h | 48 +++++
5 files changed, 351 insertions(+)
create mode 100644 Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
create mode 100644 Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
create mode 100644 Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
diff --git a/Platform/Hisilicon/HiKey/HiKey.dsc b/Platform/Hisilicon/HiKey/HiKey.dsc
index 2dfdced..37ad6da 100644
--- a/Platform/Hisilicon/HiKey/HiKey.dsc
+++ b/Platform/Hisilicon/HiKey/HiKey.dsc
@@ -192,9 +192,17 @@
#
# GPIO
#
+ Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
+ # Virtual Keyboard
+ #
+ EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
+ Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
+
+ #
# MMC/SD
#
EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
diff --git a/Platform/Hisilicon/HiKey/HiKey.fdf b/Platform/Hisilicon/HiKey/HiKey.fdf
index 80b272c..e7cea73 100644
--- a/Platform/Hisilicon/HiKey/HiKey.fdf
+++ b/Platform/Hisilicon/HiKey/HiKey.fdf
@@ -355,9 +355,17 @@ READ_LOCK_STATUS = TRUE
#
# GPIO
#
+ INF Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
+ # Virtual Keyboard
+ #
+ INF EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
+ INF Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
+
+ #
# Multimedia Card Interface
#
INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
new file mode 100644
index 0000000..65e8001
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
@@ -0,0 +1,229 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/BaseMemoryLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/IoLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PrintLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+#include <Protocol/PlatformVirtualKeyboard.h>
+
+#include <Hi6220.h>
+#include <Hi6220RegsPeri.h>
+#include <libfdt.h>
+
+#define SERIAL_NUMBER_SIZE 17
+#define SERIAL_NUMBER_BLOCK_SIZE EFI_PAGE_SIZE
+#define SERIAL_NUMBER_LBA 1024
+#define RANDOM_MAX 0x7FFFFFFFFFFFFFFF
+#define RANDOM_MAGIC 0x9A4DBEAF
+
+#define DETECT_J15_FASTBOOT 24 // GPIO3_0
+
+#define ADB_REBOOT_ADDRESS 0x05F01000
+#define ADB_REBOOT_BOOTLOADER 0x77665500
+#define ADB_REBOOT_NONE 0x77665501
+
+
+typedef struct {
+ UINT64 Magic;
+ UINT64 Data;
+ CHAR16 UnicodeSN[SERIAL_NUMBER_SIZE];
+} RANDOM_SERIAL_NUMBER;
+
+STATIC EMBEDDED_GPIO *mGpio;
+
+STATIC
+VOID
+UartInit (
+ IN VOID
+ )
+{
+ UINT32 Val;
+
+ /* make UART1 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART1);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART1);
+ /* make UART2 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART2);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART2);
+ /* make UART3 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART3);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART3);
+ /* make UART4 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART4);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART4);
+
+ /* make DW_MMC2 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS0, PERIPH_RST0_MMC2);
+
+ /* enable clock for BT/WIFI */
+ Val = MmioRead32 (PMUSSI_REG(0x1c)) | 0x40;
+ MmioWrite32 (PMUSSI_REG(0x1c), Val);
+}
+
+STATIC
+VOID
+MtcmosInit (
+ IN VOID
+ )
+{
+ UINT32 Data;
+
+ /* enable MTCMOS for GPU */
+ MmioWrite32 (AO_CTRL_BASE + SC_PW_MTCMOS_EN0, PW_EN0_G3D);
+ do {
+ Data = MmioRead32 (AO_CTRL_BASE + SC_PW_MTCMOS_ACK_STAT0);
+ } while ((Data & PW_EN0_G3D) == 0);
+}
+
+EFI_STATUS
+HiKeyInitPeripherals (
+ IN VOID
+ )
+{
+ UINT32 Data, Bits;
+
+ /* make I2C0/I2C1/I2C2/SPI0 out of reset */
+ Bits = PERIPH_RST3_I2C0 | PERIPH_RST3_I2C1 | PERIPH_RST3_I2C2 | \
+ PERIPH_RST3_SSP;
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, Bits);
+
+ do {
+ Data = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_RSTSTAT3);
+ } while (Data & Bits);
+
+ UartInit ();
+ MtcmosInit ();
+
+ /* Set DETECT_J15_FASTBOOT (GPIO24) pin as GPIO function */
+ MmioWrite32 (0xf7010950, 0); /* configure GPIO24 as nopull */
+ MmioWrite32 (0xf7010140, 0); /* configure GPIO24 as GPIO */
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardRegister (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (
+ &gEmbeddedGpioProtocolGuid,
+ NULL,
+ (VOID **) &mGpio
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardReset (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ if (mGpio == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = mGpio->Set (mGpio, DETECT_J15_FASTBOOT, GPIO_MODE_INPUT);
+ return Status;
+}
+
+BOOLEAN
+EFIAPI
+VirtualKeyboardQuery (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ EFI_STATUS Status;
+ UINTN Value = 0;
+
+ if ((VirtualKey == NULL) || (mGpio == NULL)) {
+ return FALSE;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ goto Done;
+ } else {
+ Status = mGpio->Get (mGpio, DETECT_J15_FASTBOOT, &Value);
+ if (EFI_ERROR (Status) || (Value != 0)) {
+ return FALSE;
+ }
+ }
+Done:
+ VirtualKey->Signature = VIRTUAL_KEYBOARD_KEY_SIGNATURE;
+ VirtualKey->Key.ScanCode = SCAN_NULL;
+ VirtualKey->Key.UnicodeChar = L'f';
+ return TRUE;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardClear (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ if (VirtualKey == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ MmioWrite32 (ADB_REBOOT_ADDRESS, ADB_REBOOT_NONE);
+ WriteBackInvalidateDataCacheRange ((VOID *)ADB_REBOOT_ADDRESS, 4);
+ }
+ return EFI_SUCCESS;
+}
+
+PLATFORM_VIRTUAL_KBD_PROTOCOL mVirtualKeyboard = {
+ VirtualKeyboardRegister,
+ VirtualKeyboardReset,
+ VirtualKeyboardQuery,
+ VirtualKeyboardClear
+};
+
+EFI_STATUS
+EFIAPI
+HiKeyEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = HiKeyInitPeripherals ();
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gPlatformVirtualKeyboardProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &mVirtualKeyboard
+ );
+ return Status;
+}
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
new file mode 100644
index 0000000..814b5da
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
@@ -0,0 +1,58 @@
+#
+# Copyright (c) 2013 - 2014, ARM Ltd. All rights reserved.
+# Copyright (c) 2018, Linaro Ltd. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = HiKeyDxe
+ FILE_GUID = f567684b-1089-4214-8881-d64b20cbda2f
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKeyEntryPoint
+
+[Sources.common]
+ HiKeyDxe.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ BaseMemoryLib
+ CacheMaintenanceLib
+ DebugLib
+ DxeServicesLib
+ DxeServicesTableLib
+ FdtLib
+ IoLib
+ PcdLib
+ PrintLib
+ SerialPortLib
+ TimerLib
+ UefiBootServicesTableLib
+ UefiRuntimeServicesTableLib
+ UefiLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gEmbeddedGpioProtocolGuid
+ gPlatformVirtualKeyboardProtocolGuid
+
+[Guids]
+ gEfiEndOfDxeEventGroupGuid
+ gEfiFileInfoGuid
+
+[Depex]
+ TRUE
diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
new file mode 100644
index 0000000..8419685
--- /dev/null
+++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
@@ -0,0 +1,48 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HI6220_REGS_PERI_H__
+#define __HI6220_REGS_PERI_H__
+
+#define SC_PERIPH_CLKEN3 0x230
+#define SC_PERIPH_RSTEN3 0x330
+#define SC_PERIPH_RSTDIS0 0x304
+#define SC_PERIPH_RSTDIS3 0x334
+#define SC_PERIPH_RSTSTAT3 0x338
+
+/* SC_PERIPH_RSTEN0/RSTDIS0/RSTSTAT0 */
+#define PERIPH_RST0_MMC2 (1 << 2)
+
+/* SC_PERIPH_RSTEN3/RSTDIS3/RSTSTAT3 */
+#define PERIPH_RST3_CSSYS (1 << 0)
+#define PERIPH_RST3_I2C0 (1 << 1)
+#define PERIPH_RST3_I2C1 (1 << 2)
+#define PERIPH_RST3_I2C2 (1 << 3)
+#define PERIPH_RST3_I2C3 (1 << 4)
+#define PERIPH_RST3_UART1 (1 << 5)
+#define PERIPH_RST3_UART2 (1 << 6)
+#define PERIPH_RST3_UART3 (1 << 7)
+#define PERIPH_RST3_UART4 (1 << 8)
+#define PERIPH_RST3_SSP (1 << 9)
+#define PERIPH_RST3_PWM (1 << 10)
+#define PERIPH_RST3_BLPWM (1 << 11)
+#define PERIPH_RST3_TSENSOR (1 << 12)
+#define PERIPH_RST3_DAPB (1 << 18)
+#define PERIPH_RST3_HKADC (1 << 19)
+#define PERIPH_RST3_CODEC_SSI (1 << 20)
+#define PERIPH_RST3_PMUSSI1 (1 << 22)
+
+#define PMUSSI_REG(x) (PMUSSI_BASE + ((x) << 2))
+
+#endif /* __HI6220_REGS_PERI_H__ */
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread