From: Heyi Guo <heyi.guo@linaro.org>
To: edk2-devel@lists.01.org
Cc: Heyi Guo <heyi.guo@linaro.org>, Ruiyu Ni <ruiyu.ni@intel.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Star Zeng <star.zeng@intel.com>, Eric Dong <eric.dong@intel.com>,
Laszlo Ersek <lersek@redhat.com>,
Michael D Kinney <michael.d.kinney@intel.com>
Subject: [RFC v4 1/3] MdeModulePkg/PciHostBridgeDxe: Add support for address translation
Date: Tue, 27 Feb 2018 10:09:47 +0800 [thread overview]
Message-ID: <1519697389-3525-2-git-send-email-heyi.guo@linaro.org> (raw)
In-Reply-To: <1519697389-3525-1-git-send-email-heyi.guo@linaro.org>
PCI address translation is necessary for some non-x86 platforms. On
such platforms, address value (denoted as "device address" or "address
in PCI view") set to PCI BAR registers in configuration space might be
different from the address which is used by CPU to access the
registers in memory BAR or IO BAR spaces (denoted as "host address" or
"address in CPU view"). The difference between the two addresses is
called "Address Translation Offset" or simply "translation", and can
be represented by "Address Translation Offset" in ACPI QWORD Address
Space Descriptor (Offset 0x1E). However UEFI and ACPI differs on the
definitions of QWORD Address Space Descriptor, and we will follow UEFI
definition on UEFI protocols, such as PCI root bridge IO protocol and
PCI IO protocol. In UEFI 2.7, "Address Translation Offset" is "Offset
to apply to the Starting address to convert it to a PCI address". This
means:
1. Translation = device address - host address.
2. PciRootBridgeIo->Configuration should return CPU view address, as
well as PciIo->GetBarAttributes.
Summary of addresses used:
1. Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address, for
it is easy to check whether the address is below 4G or above 4G.
2. Address returned by
EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL::GetProposedResources
is device address, or else PCI bus driver cannot set correct address
into PCI BAR registers.
3. Address returned by PciRootBridgeIo->Configuration is host address
per UEFI 2.7 definition.
4. Addresses used in GCD manipulation are host address.
5. Addresses in ResAllocNode of PCI_ROOT_BRIDGE_INSTANCE are host
address, for they are allocated from GCD.
6. Address passed to PciHostBridgeResourceConflict is host address,
for it comes from ResAllocNode.
RESTRICTION: to simplify the situation, we require the alignment of
Translation must be larger than any BAR alignment in the same root
bridge, so that resource allocation alignment can be applied to both
device address and host address.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Heyi Guo <heyi.guo@linaro.org>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
---
Notes:
v4:
- Add ASSERT (FALSE) to default branch in GetTranslationByResourceType
[Laszlo]
- Fix bug when passing BaseAddress to gDS->AllocateIoSpace and
gDS->AllocateMemorySpace [Laszlo]
- Add comment for applying alignment to both device address and host
address, and add NOTE for the alignment requirement of Translation,
as well as in commit message [Laszlo][Ray]
- Improve indention for the code in CreateRootBridge [Laszlo]
- Improve comment for Translation in PCI_ROOT_BRIDGE_APERTURE
definition [Laszlo]
- Ignore translation of bus in CreateRootBridge
MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h | 2 +
MdeModulePkg/Include/Library/PciHostBridgeLib.h | 14 +++
MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c | 85 +++++++++++---
MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c | 122 +++++++++++++++++---
4 files changed, 194 insertions(+), 29 deletions(-)
diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h
index 8612c0c3251b..662c2dd59529 100644
--- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h
+++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostResource.h
@@ -38,6 +38,8 @@ typedef enum {
typedef struct {
PCI_RESOURCE_TYPE Type;
+ // Base is a host address instead of a device address when address translation
+ // exists and host address != device address
UINT64 Base;
UINT64 Length;
UINT64 Alignment;
diff --git a/MdeModulePkg/Include/Library/PciHostBridgeLib.h b/MdeModulePkg/Include/Library/PciHostBridgeLib.h
index d42e9ecdd763..c842a4152e85 100644
--- a/MdeModulePkg/Include/Library/PciHostBridgeLib.h
+++ b/MdeModulePkg/Include/Library/PciHostBridgeLib.h
@@ -20,8 +20,22 @@
// (Base > Limit) indicates an aperture is not available.
//
typedef struct {
+ // Base and Limit are the device address instead of host address when
+ // Translation is not zero
UINT64 Base;
UINT64 Limit;
+ // According to UEFI 2.7, Device Address = Host Address + Translation,
+ // so Translation = Device Address - Host Address.
+ // On platforms where Translation is not zero, the subtraction is probably to
+ // be performed with UINT64 wrap-around semantics, for we may translate an
+ // above-4G host address into a below-4G device address for legacy PCIe device
+ // compatibility.
+ // NOTE: The alignment of Translation is required to be larger than any BAR
+ // alignment in the same root bridge, so that the same alignment can be
+ // applied to both device address and host address, which simplifies the
+ // situation and makes the current resource allocation code in generic PCI
+ // host bridge driver still work.
+ UINT64 Translation;
} PCI_ROOT_BRIDGE_APERTURE;
typedef struct {
diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c
index 1494848c3e8c..1e65faee9084 100644
--- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c
+++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciHostBridge.c
@@ -32,6 +32,30 @@ EDKII_IOMMU_PROTOCOL *mIoMmuProtocol;
EFI_EVENT mIoMmuEvent;
VOID *mIoMmuRegistration;
+STATIC
+UINT64
+GetTranslationByResourceType (
+ IN PCI_ROOT_BRIDGE_INSTANCE *RootBridge,
+ IN PCI_RESOURCE_TYPE ResourceType
+ )
+{
+ switch (ResourceType) {
+ case TypeIo:
+ return RootBridge->Io.Translation;
+ case TypeMem32:
+ return RootBridge->Mem.Translation;
+ case TypePMem32:
+ return RootBridge->PMem.Translation;
+ case TypeMem64:
+ return RootBridge->MemAbove4G.Translation;
+ case TypePMem64:
+ return RootBridge->PMemAbove4G.Translation;
+ default:
+ ASSERT (FALSE);
+ return 0;
+ }
+}
+
/**
Ensure the compatibility of an IO space descriptor with the IO aperture.
@@ -366,6 +390,7 @@ InitializePciHostBridge (
UINTN MemApertureIndex;
BOOLEAN ResourceAssigned;
LIST_ENTRY *Link;
+ UINT64 TempHostAddress;
RootBridges = PciHostBridgeGetRootBridges (&RootBridgeCount);
if ((RootBridges == NULL) || (RootBridgeCount == 0)) {
@@ -411,18 +436,24 @@ InitializePciHostBridge (
}
if (RootBridges[Index].Io.Base <= RootBridges[Index].Io.Limit) {
+ // Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
+ // According to UEFI 2.7, device address = host address + Translation.
+ // For GCD resource manipulation, we should use host address, so
+ // Translation is subtracted from device address here.
Status = AddIoSpace (
- RootBridges[Index].Io.Base,
+ RootBridges[Index].Io.Base - RootBridges[Index].Io.Translation,
RootBridges[Index].Io.Limit - RootBridges[Index].Io.Base + 1
);
ASSERT_EFI_ERROR (Status);
if (ResourceAssigned) {
+ TempHostAddress = RootBridges[Index].Io.Base -
+ RootBridges[Index].Io.Translation;
Status = gDS->AllocateIoSpace (
EfiGcdAllocateAddress,
EfiGcdIoTypeIo,
0,
RootBridges[Index].Io.Limit - RootBridges[Index].Io.Base + 1,
- &RootBridges[Index].Io.Base,
+ &TempHostAddress,
gImageHandle,
NULL
);
@@ -443,14 +474,18 @@ InitializePciHostBridge (
for (MemApertureIndex = 0; MemApertureIndex < ARRAY_SIZE (MemApertures); MemApertureIndex++) {
if (MemApertures[MemApertureIndex]->Base <= MemApertures[MemApertureIndex]->Limit) {
+ // Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
+ // According to UEFI 2.7, device address = host address + Translation.
+ // For GCD resource manipulation, we should use host address, so
+ // Translation is subtracted from device address here.
Status = AddMemoryMappedIoSpace (
- MemApertures[MemApertureIndex]->Base,
+ MemApertures[MemApertureIndex]->Base - MemApertures[MemApertureIndex]->Translation,
MemApertures[MemApertureIndex]->Limit - MemApertures[MemApertureIndex]->Base + 1,
EFI_MEMORY_UC
);
ASSERT_EFI_ERROR (Status);
Status = gDS->SetMemorySpaceAttributes (
- MemApertures[MemApertureIndex]->Base,
+ MemApertures[MemApertureIndex]->Base - MemApertures[MemApertureIndex]->Translation,
MemApertures[MemApertureIndex]->Limit - MemApertures[MemApertureIndex]->Base + 1,
EFI_MEMORY_UC
);
@@ -458,12 +493,14 @@ InitializePciHostBridge (
DEBUG ((DEBUG_WARN, "PciHostBridge driver failed to set EFI_MEMORY_UC to MMIO aperture - %r.\n", Status));
}
if (ResourceAssigned) {
+ TempHostAddress = MemApertures[MemApertureIndex]->Base -
+ MemApertures[MemApertureIndex]->Translation;
Status = gDS->AllocateMemorySpace (
EfiGcdAllocateAddress,
EfiGcdMemoryTypeMemoryMappedIo,
0,
MemApertures[MemApertureIndex]->Limit - MemApertures[MemApertureIndex]->Base + 1,
- &MemApertures[MemApertureIndex]->Base,
+ &TempHostAddress,
gImageHandle,
NULL
);
@@ -654,6 +691,11 @@ AllocateResource (
if (BaseAddress < Limit) {
//
// Have to make sure Aligment is handled since we are doing direct address allocation
+ // Strictly speaking, alignment requirement should be applied to device
+ // address instead of host address which is used in GCD manipulation below,
+ // but as we restrict the alignment of Translation to be larger than any BAR
+ // alignment in the root bridge, we can simplify the situation and consider
+ // the same alignment requirement is also applied to host address.
//
BaseAddress = ALIGN_VALUE (BaseAddress, LShiftU64 (1, BitsOfAlignment));
@@ -824,12 +866,17 @@ NotifyPhase (
switch (Index) {
case TypeIo:
+ // Base and Limit in PCI_ROOT_BRIDGE_APERTURE are device address.
+ // According to UEFI 2.7, device address = host address + Translation.
+ // For AllocateResource is manipulating GCD resource, we should use
+ // host address here, so Translation is subtracted from Base and
+ // Limit.
BaseAddress = AllocateResource (
FALSE,
RootBridge->ResAllocNode[Index].Length,
MIN (15, BitsOfAlignment),
- ALIGN_VALUE (RootBridge->Io.Base, Alignment + 1),
- RootBridge->Io.Limit
+ ALIGN_VALUE (RootBridge->Io.Base, Alignment + 1) - RootBridge->Io.Translation,
+ RootBridge->Io.Limit - RootBridge->Io.Translation
);
break;
@@ -838,8 +885,8 @@ NotifyPhase (
TRUE,
RootBridge->ResAllocNode[Index].Length,
MIN (63, BitsOfAlignment),
- ALIGN_VALUE (RootBridge->MemAbove4G.Base, Alignment + 1),
- RootBridge->MemAbove4G.Limit
+ ALIGN_VALUE (RootBridge->MemAbove4G.Base, Alignment + 1) - RootBridge->MemAbove4G.Translation,
+ RootBridge->MemAbove4G.Limit - RootBridge->MemAbove4G.Translation
);
if (BaseAddress != MAX_UINT64) {
break;
@@ -853,8 +900,8 @@ NotifyPhase (
TRUE,
RootBridge->ResAllocNode[Index].Length,
MIN (31, BitsOfAlignment),
- ALIGN_VALUE (RootBridge->Mem.Base, Alignment + 1),
- RootBridge->Mem.Limit
+ ALIGN_VALUE (RootBridge->Mem.Base, Alignment + 1) - RootBridge->Mem.Translation,
+ RootBridge->Mem.Limit - RootBridge->Mem.Translation
);
break;
@@ -863,8 +910,8 @@ NotifyPhase (
TRUE,
RootBridge->ResAllocNode[Index].Length,
MIN (63, BitsOfAlignment),
- ALIGN_VALUE (RootBridge->PMemAbove4G.Base, Alignment + 1),
- RootBridge->PMemAbove4G.Limit
+ ALIGN_VALUE (RootBridge->PMemAbove4G.Base, Alignment + 1) - RootBridge->PMemAbove4G.Translation,
+ RootBridge->PMemAbove4G.Limit - RootBridge->PMemAbove4G.Translation
);
if (BaseAddress != MAX_UINT64) {
break;
@@ -877,8 +924,8 @@ NotifyPhase (
TRUE,
RootBridge->ResAllocNode[Index].Length,
MIN (31, BitsOfAlignment),
- ALIGN_VALUE (RootBridge->PMem.Base, Alignment + 1),
- RootBridge->PMem.Limit
+ ALIGN_VALUE (RootBridge->PMem.Base, Alignment + 1) - RootBridge->PMem.Translation,
+ RootBridge->PMem.Limit - RootBridge->PMem.Translation
);
break;
@@ -1152,6 +1199,7 @@ StartBusEnumeration (
Descriptor->AddrSpaceGranularity = 0;
Descriptor->AddrRangeMin = RootBridge->Bus.Base;
Descriptor->AddrRangeMax = 0;
+ // Ignore translation offset for bus
Descriptor->AddrTranslationOffset = 0;
Descriptor->AddrLen = RootBridge->Bus.Limit - RootBridge->Bus.Base + 1;
@@ -1421,7 +1469,12 @@ GetProposedResources (
Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
Descriptor->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3;;
Descriptor->GenFlag = 0;
- Descriptor->AddrRangeMin = RootBridge->ResAllocNode[Index].Base;
+ // AddrRangeMin in Resource Descriptor here should be device address
+ // instead of host address, or else PCI bus driver cannot set correct
+ // address into PCI BAR registers.
+ // Base in ResAllocNode is a host address, so Translation is added.
+ Descriptor->AddrRangeMin = RootBridge->ResAllocNode[Index].Base +
+ GetTranslationByResourceType (RootBridge, Index);
Descriptor->AddrRangeMax = 0;
Descriptor->AddrTranslationOffset = (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : PCI_RESOURCE_LESS;
Descriptor->AddrLen = RootBridge->ResAllocNode[Index].Length;
diff --git a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
index dc06c16dc038..edaa0d48a441 100644
--- a/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
+++ b/MdeModulePkg/Bus/Pci/PciHostBridgeDxe/PciRootBridgeIo.c
@@ -86,12 +86,28 @@ CreateRootBridge (
(Bridge->AllocationAttributes & EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM) != 0 ? L"CombineMemPMem " : L"",
(Bridge->AllocationAttributes & EFI_PCI_HOST_BRIDGE_MEM64_DECODE) != 0 ? L"Mem64Decode" : L""
));
+ // We don't see any scenario for bus translation, so translation for bus is just ignored.
DEBUG ((EFI_D_INFO, " Bus: %lx - %lx\n", Bridge->Bus.Base, Bridge->Bus.Limit));
- DEBUG ((EFI_D_INFO, " Io: %lx - %lx\n", Bridge->Io.Base, Bridge->Io.Limit));
- DEBUG ((EFI_D_INFO, " Mem: %lx - %lx\n", Bridge->Mem.Base, Bridge->Mem.Limit));
- DEBUG ((EFI_D_INFO, " MemAbove4G: %lx - %lx\n", Bridge->MemAbove4G.Base, Bridge->MemAbove4G.Limit));
- DEBUG ((EFI_D_INFO, " PMem: %lx - %lx\n", Bridge->PMem.Base, Bridge->PMem.Limit));
- DEBUG ((EFI_D_INFO, " PMemAbove4G: %lx - %lx\n", Bridge->PMemAbove4G.Base, Bridge->PMemAbove4G.Limit));
+ DEBUG ((
+ DEBUG_INFO, " Io: %lx - %lx Translation=%lx\n",
+ Bridge->Io.Base, Bridge->Io.Limit, Bridge->Io.Translation
+ ));
+ DEBUG ((
+ DEBUG_INFO, " Mem: %lx - %lx Translation=%lx\n",
+ Bridge->Mem.Base, Bridge->Mem.Limit, Bridge->Mem.Translation
+ ));
+ DEBUG ((
+ DEBUG_INFO, " MemAbove4G: %lx - %lx Translation=%lx\n",
+ Bridge->MemAbove4G.Base, Bridge->MemAbove4G.Limit, Bridge->MemAbove4G.Translation
+ ));
+ DEBUG ((
+ DEBUG_INFO, " PMem: %lx - %lx Translation=%lx\n",
+ Bridge->PMem.Base, Bridge->PMem.Limit, Bridge->PMem.Translation
+ ));
+ DEBUG ((
+ DEBUG_INFO, " PMemAbove4G: %lx - %lx Translation=%lx\n",
+ Bridge->PMemAbove4G.Base, Bridge->PMemAbove4G.Limit, Bridge->PMemAbove4G.Translation
+ ));
//
// Make sure Mem and MemAbove4G apertures are valid
@@ -206,7 +222,15 @@ CreateRootBridge (
}
RootBridge->ResAllocNode[Index].Type = Index;
if (Bridge->ResourceAssigned && (Aperture->Limit >= Aperture->Base)) {
- RootBridge->ResAllocNode[Index].Base = Aperture->Base;
+ // Ignore translation for bus
+ if (Index == TypeBus) {
+ RootBridge->ResAllocNode[Index].Base = Aperture->Base;
+ } else {
+ // Base in ResAllocNode is a host address, while Base in Aperture is a
+ // device address, so translation needs to be subtracted.
+ RootBridge->ResAllocNode[Index].Base = Aperture->Base -
+ Aperture->Translation;
+ }
RootBridge->ResAllocNode[Index].Length = Aperture->Limit - Aperture->Base + 1;
RootBridge->ResAllocNode[Index].Status = ResAllocated;
} else {
@@ -403,6 +427,28 @@ RootBridgeIoCheckParameter (
return EFI_SUCCESS;
}
+EFI_STATUS
+RootBridgeIoGetMemTranslationByAddress (
+ IN PCI_ROOT_BRIDGE_INSTANCE *RootBridge,
+ IN UINT64 Address,
+ IN OUT UINT64 *Translation
+ )
+{
+ if (Address >= RootBridge->Mem.Base && Address <= RootBridge->Mem.Limit) {
+ *Translation = RootBridge->Mem.Translation;
+ } else if (Address >= RootBridge->PMem.Base && Address <= RootBridge->PMem.Limit) {
+ *Translation = RootBridge->PMem.Translation;
+ } else if (Address >= RootBridge->MemAbove4G.Base && Address <= RootBridge->MemAbove4G.Limit) {
+ *Translation = RootBridge->MemAbove4G.Translation;
+ } else if (Address >= RootBridge->PMemAbove4G.Base && Address <= RootBridge->PMemAbove4G.Limit) {
+ *Translation = RootBridge->PMemAbove4G.Translation;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
+
/**
Polls an address in memory mapped I/O space until an exit condition is met,
or a timeout occurs.
@@ -658,13 +704,24 @@ RootBridgeIoMemRead (
)
{
EFI_STATUS Status;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridge;
+ UINT64 Translation;
Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address,
Count, Buffer);
if (EFI_ERROR (Status)) {
return Status;
}
- return mCpuIo->Mem.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer);
+
+ RootBridge = ROOT_BRIDGE_FROM_THIS (This);
+ Status = RootBridgeIoGetMemTranslationByAddress (RootBridge, Address, &Translation);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Address passed to CpuIo->Mem.Read should be a host address instead of
+ // device address, so Translation should be subtracted.
+ return mCpuIo->Mem.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address - Translation, Count, Buffer);
}
/**
@@ -705,13 +762,24 @@ RootBridgeIoMemWrite (
)
{
EFI_STATUS Status;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridge;
+ UINT64 Translation;
Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address,
Count, Buffer);
if (EFI_ERROR (Status)) {
return Status;
}
- return mCpuIo->Mem.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer);
+
+ RootBridge = ROOT_BRIDGE_FROM_THIS (This);
+ Status = RootBridgeIoGetMemTranslationByAddress (RootBridge, Address, &Translation);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Address passed to CpuIo->Mem.Write should be a host address instead of
+ // device address, so Translation should be subtracted.
+ return mCpuIo->Mem.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address - Translation, Count, Buffer);
}
/**
@@ -746,6 +814,8 @@ RootBridgeIoIoRead (
)
{
EFI_STATUS Status;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridge;
+
Status = RootBridgeIoCheckParameter (
This, IoOperation, Width,
Address, Count, Buffer
@@ -753,7 +823,12 @@ RootBridgeIoIoRead (
if (EFI_ERROR (Status)) {
return Status;
}
- return mCpuIo->Io.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer);
+
+ RootBridge = ROOT_BRIDGE_FROM_THIS (This);
+
+ // Address passed to CpuIo->Io.Read should be a host address instead of
+ // device address, so Translation should be subtracted.
+ return mCpuIo->Io.Read (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address - RootBridge->Io.Translation, Count, Buffer);
}
/**
@@ -788,6 +863,8 @@ RootBridgeIoIoWrite (
)
{
EFI_STATUS Status;
+ PCI_ROOT_BRIDGE_INSTANCE *RootBridge;
+
Status = RootBridgeIoCheckParameter (
This, IoOperation, Width,
Address, Count, Buffer
@@ -795,7 +872,12 @@ RootBridgeIoIoWrite (
if (EFI_ERROR (Status)) {
return Status;
}
- return mCpuIo->Io.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address, Count, Buffer);
+
+ RootBridge = ROOT_BRIDGE_FROM_THIS (This);
+
+ // Address passed to CpuIo->Io.Write should be a host address instead of
+ // device address, so Translation should be subtracted.
+ return mCpuIo->Io.Write (mCpuIo, (EFI_CPU_IO_PROTOCOL_WIDTH) Width, Address - RootBridge->Io.Translation, Count, Buffer);
}
/**
@@ -1615,25 +1697,39 @@ RootBridgeIoConfiguration (
Descriptor->Desc = ACPI_ADDRESS_SPACE_DESCRIPTOR;
Descriptor->Len = sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) - 3;
+ // According to UEFI 2.7, RootBridgeIo->Configuration should return address
+ // range in CPU view (host address), and ResAllocNode->Base is already a CPU
+ // view address (host address).
Descriptor->AddrRangeMin = ResAllocNode->Base;
Descriptor->AddrRangeMax = ResAllocNode->Base + ResAllocNode->Length - 1;
Descriptor->AddrLen = ResAllocNode->Length;
switch (ResAllocNode->Type) {
case TypeIo:
- Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_IO;
+ Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_IO;
+ Descriptor->AddrTranslationOffset = RootBridge->Io.Translation;
break;
case TypePMem32:
- Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE;
+ Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE;
+ Descriptor->AddrTranslationOffset = RootBridge->PMem.Translation;
+ Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM;
+ Descriptor->AddrSpaceGranularity = 32;
+ break;
+
case TypeMem32:
+ Descriptor->AddrTranslationOffset = RootBridge->Mem.Translation;
Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM;
Descriptor->AddrSpaceGranularity = 32;
break;
case TypePMem64:
- Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE;
+ Descriptor->SpecificFlag = EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE;
+ Descriptor->AddrTranslationOffset = RootBridge->PMemAbove4G.Translation;
+ Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM;
+ Descriptor->AddrSpaceGranularity = 64;
case TypeMem64:
+ Descriptor->AddrTranslationOffset = RootBridge->MemAbove4G.Translation;
Descriptor->ResType = ACPI_ADDRESS_SPACE_TYPE_MEM;
Descriptor->AddrSpaceGranularity = 64;
break;
--
2.7.4
next prev parent reply other threads:[~2018-02-27 2:04 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-27 2:09 [RFC v4 0/3] Add translation support to generic PciHostBridge Heyi Guo
2018-02-27 2:09 ` Heyi Guo [this message]
2018-02-27 8:48 ` [RFC v4 1/3] MdeModulePkg/PciHostBridgeDxe: Add support for address translation Ni, Ruiyu
2018-02-27 8:55 ` Ard Biesheuvel
2018-02-27 9:33 ` Guo Heyi
2018-02-27 9:59 ` Ni, Ruiyu
2018-02-27 10:14 ` Ard Biesheuvel
2018-02-27 10:45 ` Guo Heyi
2018-02-27 11:44 ` Guo Heyi
2018-02-28 2:29 ` Ni, Ruiyu
2018-02-28 7:25 ` Ni, Ruiyu
2018-02-28 7:53 ` Guo Heyi
2018-02-28 9:39 ` Laszlo Ersek
2018-02-28 23:31 ` Guo Heyi
2018-03-01 3:56 ` Guo Heyi
2018-03-01 4:44 ` Ni, Ruiyu
2018-02-27 2:09 ` [RFC v4 2/3] MdeModulePkg/PciBus: convert host address to device address Heyi Guo
2018-02-27 2:09 ` [RFC v4 3/3] MdeModulePkg/PciBus: return CPU address for GetBarAttributes Heyi Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1519697389-3525-2-git-send-email-heyi.guo@linaro.org \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox