* [PATCH V2 0/7] OpalPassword: New solution without SMM device code
@ 2018-03-07 13:19 Star Zeng
2018-03-07 13:19 ` [PATCH V2 1/7] MdeModulePkg LockBoxLib: Support LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY Star Zeng
` (6 more replies)
0 siblings, 7 replies; 10+ messages in thread
From: Star Zeng @ 2018-03-07 13:19 UTC (permalink / raw)
To: edk2-devel; +Cc: Star Zeng, Jiewen Yao, Eric Dong, Chao Zhang
The patch series is also at
https://github.com/lzeng14/edk2 OpalPasswordNewV2 branch.
After IOMMU is enabled in S3, original solution with SMM device
code (OpalPasswordSmm) to unlock OPAL device for S3 will not work
as the DMA operation will be aborted without granted DMA buffer.
Instead, this solution is to add OpalPasswordPei to eliminate
SMM device code, and OPAL setup UI produced by OpalPasswordDxe
will be updated to send requests (set password, update password,
and etc), and then the requests will be processed in next boot
before SmmReadyToLock, password and device info will be saved to
lock box used by OpalPasswordPei to unlock OPAL device for S3.
The old solution related codes are also removed.
V2: Thanks for Jiewen's great comments.
1. Still use suppressif for unavailabe requests, and use grayoutif
for conflict requests.
2. Zero DevInfo in BuildOpalDeviceInfoAta() and BuildOpalDeviceInfoNvme().
3. Zero Mask and Unicode in OpalDriverPopUpPsidInput() and
OpalDriverPopUpPasswordInput() even for NULL return path.
4. Do some HII related refinement.
5. Do more NULL pointer check.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Star Zeng (7):
MdeModulePkg LockBoxLib: Support LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
SecurityPkg TcgStorageOpalLib: Make it be base type really
SecurityPkg TcgStorageCoreLib: Make it be base type really
SecurityPkg OpalPassword: Add solution without SMM device code
SecurityPkg OpalPassword: Remove old solution
SecurityPkg OpalPasswordSupportLib: Remove it
SecurityPkg OpalPasswordExtraInfoVariable.h: Remove it
MdeModulePkg/Include/Library/LockBoxLib.h | 14 +-
.../Library/SmmLockBoxLib/SmmLockBoxDxeLib.c | 4 +-
.../Library/SmmLockBoxLib/SmmLockBoxSmmLib.c | 227 +-
.../Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf | 10 +-
.../Include/Guid/OpalPasswordExtraInfoVariable.h | 27 -
.../Include/Library/OpalPasswordSupportLib.h | 289 --
.../OpalPasswordSupportLib.c | 781 -----
.../OpalPasswordSupportLib.inf | 55 -
.../OpalPasswordSupportNotify.h | 55 -
.../TcgStorageCoreLib/TcgStorageCoreLib.inf | 4 +-
.../TcgStorageOpalLib/TcgStorageOpalLib.inf | 8 +-
SecurityPkg/SecurityPkg.dec | 4 -
SecurityPkg/SecurityPkg.dsc | 6 +-
.../ComponentName.c | 0
.../OpalAhciMode.c | 492 ++--
.../OpalAhciMode.h | 93 +-
SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c | 3003 ++++++++++++++++++++
.../{OpalPasswordDxe => OpalPassword}/OpalDriver.h | 215 +-
.../{OpalPasswordDxe => OpalPassword}/OpalHii.c | 895 ++----
.../OpalHiiPrivate.h => OpalPassword/OpalHii.h} | 150 +-
.../OpalHiiCallbacks.c | 6 +-
.../OpalHiiFormStrings.uni | 49 +-
.../OpalHiiFormValues.h | 97 +-
.../OpalNvmeMode.c | 95 +-
.../OpalNvmeMode.h | 19 +-
.../OpalNvmeReg.h | 5 +-
.../Tcg/Opal/OpalPassword/OpalPasswordCommon.h | 65 +
.../OpalPasswordDxe.inf | 25 +-
.../OpalPasswordForm.vfr | 279 +-
.../Tcg/Opal/OpalPassword/OpalPasswordPei.c | 940 ++++++
.../Tcg/Opal/OpalPassword/OpalPasswordPei.h | 133 +
.../Tcg/Opal/OpalPassword/OpalPasswordPei.inf | 63 +
SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.c | 1091 -------
.../Tcg/Opal/OpalPasswordDxe/OpalDriverPrivate.h | 102 -
SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.h | 146 -
SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.c | 767 -----
SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.h | 173 --
.../Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.c | 1088 -------
.../Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.h | 299 --
.../Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf | 77 -
40 files changed, 5656 insertions(+), 6195 deletions(-)
delete mode 100644 SecurityPkg/Include/Guid/OpalPasswordExtraInfoVariable.h
delete mode 100644 SecurityPkg/Include/Library/OpalPasswordSupportLib.h
delete mode 100644 SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.c
delete mode 100644 SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.inf
delete mode 100644 SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportNotify.h
rename SecurityPkg/Tcg/Opal/{OpalPasswordDxe => OpalPassword}/ComponentName.c (100%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordSmm => OpalPassword}/OpalAhciMode.c (68%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordSmm => OpalPassword}/OpalAhciMode.h (85%)
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
rename SecurityPkg/Tcg/Opal/{OpalPasswordDxe => OpalPassword}/OpalDriver.h (71%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordDxe => OpalPassword}/OpalHii.c (56%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordDxe/OpalHiiPrivate.h => OpalPassword/OpalHii.h} (72%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordDxe => OpalPassword}/OpalHiiCallbacks.c (91%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordDxe => OpalPassword}/OpalHiiFormStrings.uni (66%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordDxe => OpalPassword}/OpalHiiFormValues.h (56%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordSmm => OpalPassword}/OpalNvmeMode.c (93%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordSmm => OpalPassword}/OpalNvmeMode.h (93%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordSmm => OpalPassword}/OpalNvmeReg.h (96%)
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
rename SecurityPkg/Tcg/Opal/{OpalPasswordDxe => OpalPassword}/OpalPasswordDxe.inf (80%)
rename SecurityPkg/Tcg/Opal/{OpalPasswordDxe => OpalPassword}/OpalPasswordForm.vfr (55%)
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriverPrivate.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf
--
2.7.0.windows.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V2 1/7] MdeModulePkg LockBoxLib: Support LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
2018-03-07 13:19 [PATCH V2 0/7] OpalPassword: New solution without SMM device code Star Zeng
@ 2018-03-07 13:19 ` Star Zeng
2018-03-07 13:19 ` [PATCH V2 2/7] SecurityPkg TcgStorageOpalLib: Make it be base type really Star Zeng
` (5 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Star Zeng @ 2018-03-07 13:19 UTC (permalink / raw)
To: edk2-devel; +Cc: Star Zeng, Jiewen Yao
With this flag, the LockBox can be restored in S3 resume only.
The LockBox can not be restored after SmmReadyToLock in normal boot
and after EndOfS3Resume in S3 resume.
It can not be set together with LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
---
MdeModulePkg/Include/Library/LockBoxLib.h | 14 +-
.../Library/SmmLockBoxLib/SmmLockBoxDxeLib.c | 4 +-
.../Library/SmmLockBoxLib/SmmLockBoxSmmLib.c | 227 ++++++++++++++++++++-
.../Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf | 10 +-
4 files changed, 247 insertions(+), 8 deletions(-)
diff --git a/MdeModulePkg/Include/Library/LockBoxLib.h b/MdeModulePkg/Include/Library/LockBoxLib.h
index db7fd05def58..80beb4d0f880 100644
--- a/MdeModulePkg/Include/Library/LockBoxLib.h
+++ b/MdeModulePkg/Include/Library/LockBoxLib.h
@@ -2,7 +2,7 @@
This library is only intended to be used by DXE modules that need save
confidential information to LockBox and get it by PEI modules in S3 phase.
-Copyright (c) 2010 - 2011, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -62,9 +62,17 @@ SetLockBoxAttributes (
);
//
-// With this flag, this LockBox can be restored to this Buffer with RestoreAllLockBoxInPlace()
+// With this flag, this LockBox can be restored to this Buffer
+// with RestoreAllLockBoxInPlace()
//
-#define LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE BIT0
+#define LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE BIT0
+//
+// With this flag, this LockBox can be restored in S3 resume only.
+// This LockBox can not be restored after SmmReadyToLock in normal boot
+// and after EndOfS3Resume in S3 resume.
+// It can not be set together with LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE.
+//
+#define LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY BIT1
/**
This function will update confidential information to lockbox.
diff --git a/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.c b/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.c
index b75f81e69e04..9b6f0bedbd4f 100644
--- a/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.c
+++ b/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxDxeLib.c
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -241,7 +241,7 @@ SetLockBoxAttributes (
// Basic check
//
if ((Guid == NULL) ||
- ((Attributes & ~LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE) != 0)) {
+ ((Attributes & ~(LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE | LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY)) != 0)) {
return EFI_INVALID_PARAMETER;
}
diff --git a/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.c b/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.c
index 4960df755534..af75a4cb9cd1 100644
--- a/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.c
+++ b/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.c
@@ -1,6 +1,6 @@
/** @file
-Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
@@ -20,6 +20,10 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#include <Library/LockBoxLib.h>
#include <Library/DebugLib.h>
#include <Guid/SmmLockBox.h>
+#include <Guid/EndOfS3Resume.h>
+#include <Protocol/SmmReadyToLock.h>
+#include <Protocol/SmmEndOfDxe.h>
+#include <Protocol/SmmSxDispatch2.h>
#include "SmmLockBoxLibPrivate.h"
@@ -31,6 +35,11 @@ SMM_LOCK_BOX_CONTEXT mSmmLockBoxContext;
LIST_ENTRY mLockBoxQueue = INITIALIZE_LIST_HEAD_VARIABLE (mLockBoxQueue);
BOOLEAN mSmmConfigurationTableInstalled = FALSE;
+VOID *mRegistrationSmmEndOfDxe = NULL;
+VOID *mRegistrationSmmReadyToLock = NULL;
+VOID *mRegistrationEndOfS3Resume = NULL;
+BOOLEAN mSmmLockBoxSmmReadyToLock = FALSE;
+BOOLEAN mSmmLockBoxDuringS3Resume = FALSE;
/**
This function return SmmLockBox context from SMST.
@@ -64,6 +73,128 @@ InternalGetSmmLockBoxContext (
}
/**
+ Notification for SMM ReadyToLock protocol.
+
+ @param[in] Protocol Points to the protocol's unique identifier.
+ @param[in] Interface Points to the interface instance.
+ @param[in] Handle The handle on which the interface was installed.
+
+ @retval EFI_SUCCESS Notification runs successfully.
+**/
+EFI_STATUS
+EFIAPI
+SmmLockBoxSmmReadyToLockNotify (
+ IN CONST EFI_GUID *Protocol,
+ IN VOID *Interface,
+ IN EFI_HANDLE Handle
+ )
+{
+ mSmmLockBoxSmmReadyToLock = TRUE;
+ return EFI_SUCCESS;
+}
+
+/**
+ Main entry point for an SMM handler dispatch or communicate-based callback.
+
+ @param[in] DispatchHandle The unique handle assigned to this handler by SmiHandlerRegister().
+ @param[in] Context Points to an optional handler context which was specified when the
+ handler was registered.
+ @param[in,out] CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-SMM environment into an SMM environment.
+ @param[in,out] CommBufferSize The size of the CommBuffer.
+
+ @retval EFI_SUCCESS The interrupt was handled and quiesced. No other handlers
+ should still be called.
+ @retval EFI_WARN_INTERRUPT_SOURCE_QUIESCED The interrupt has been quiesced but other handlers should
+ still be called.
+ @retval EFI_WARN_INTERRUPT_SOURCE_PENDING The interrupt is still pending and other handlers should still
+ be called.
+ @retval EFI_INTERRUPT_PENDING The interrupt could not be quiesced.
+**/
+EFI_STATUS
+EFIAPI
+SmmLockBoxS3EntryCallBack (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context OPTIONAL,
+ IN OUT VOID *CommBuffer OPTIONAL,
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ )
+{
+ mSmmLockBoxDuringS3Resume = TRUE;
+ return EFI_SUCCESS;
+}
+
+/**
+ Notification for SMM EndOfDxe protocol.
+
+ @param[in] Protocol Points to the protocol's unique identifier.
+ @param[in] Interface Points to the interface instance.
+ @param[in] Handle The handle on which the interface was installed.
+
+ @retval EFI_SUCCESS Notification runs successfully.
+**/
+EFI_STATUS
+EFIAPI
+SmmLockBoxSmmEndOfDxeNotify (
+ IN CONST EFI_GUID *Protocol,
+ IN VOID *Interface,
+ IN EFI_HANDLE Handle
+ )
+{
+ EFI_STATUS Status;
+ EFI_SMM_SX_DISPATCH2_PROTOCOL *SxDispatch;
+ EFI_SMM_SX_REGISTER_CONTEXT EntryRegisterContext;
+ EFI_HANDLE S3EntryHandle;
+
+ //
+ // Locate SmmSxDispatch2 protocol.
+ //
+ Status = gSmst->SmmLocateProtocol (
+ &gEfiSmmSxDispatch2ProtocolGuid,
+ NULL,
+ (VOID **)&SxDispatch
+ );
+ if (!EFI_ERROR (Status) && (SxDispatch != NULL)) {
+ //
+ // Register a S3 entry callback function to
+ // determine if it will be during S3 resume.
+ //
+ EntryRegisterContext.Type = SxS3;
+ EntryRegisterContext.Phase = SxEntry;
+ Status = SxDispatch->Register (
+ SxDispatch,
+ SmmLockBoxS3EntryCallBack,
+ &EntryRegisterContext,
+ &S3EntryHandle
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Notification for SMM EndOfS3Resume protocol.
+
+ @param[in] Protocol Points to the protocol's unique identifier.
+ @param[in] Interface Points to the interface instance.
+ @param[in] Handle The handle on which the interface was installed.
+
+ @retval EFI_SUCCESS Notification runs successfully.
+**/
+EFI_STATUS
+EFIAPI
+SmmLockBoxEndOfS3ResumeNotify (
+ IN CONST EFI_GUID *Protocol,
+ IN VOID *Interface,
+ IN EFI_HANDLE Handle
+ )
+{
+ mSmmLockBoxDuringS3Resume = FALSE;
+ return EFI_SUCCESS;
+}
+
+/**
Constructor for SmmLockBox library.
This is used to set SmmLockBox context, which will be used in PEI phase in S3 boot path later.
@@ -86,6 +217,36 @@ SmmLockBoxSmmConstructor (
DEBUG ((EFI_D_INFO, "SmmLockBoxSmmLib SmmLockBoxSmmConstructor - Enter\n"));
//
+ // Register SmmReadyToLock notification.
+ //
+ Status = gSmst->SmmRegisterProtocolNotify (
+ &gEfiSmmReadyToLockProtocolGuid,
+ SmmLockBoxSmmReadyToLockNotify,
+ &mRegistrationSmmReadyToLock
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Register SmmEndOfDxe notification.
+ //
+ Status = gSmst->SmmRegisterProtocolNotify (
+ &gEfiSmmEndOfDxeProtocolGuid,
+ SmmLockBoxSmmEndOfDxeNotify,
+ &mRegistrationSmmEndOfDxe
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Register EndOfS3Resume notification.
+ //
+ Status = gSmst->SmmRegisterProtocolNotify (
+ &gEdkiiEndOfS3ResumeGuid,
+ SmmLockBoxEndOfS3ResumeNotify,
+ &mRegistrationEndOfS3Resume
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
// Check if gEfiSmmLockBoxCommunicationGuid is installed by someone
//
SmmLockBoxContext = InternalGetSmmLockBoxContext ();
@@ -158,6 +319,40 @@ SmmLockBoxSmmDestructor (
DEBUG ((EFI_D_INFO, "SmmLockBoxSmmLib uninstall SmmLockBoxCommunication configuration table\n"));
}
+ if (mRegistrationSmmReadyToLock != NULL) {
+ //
+ // Unregister SmmReadyToLock notification.
+ //
+ Status = gSmst->SmmRegisterProtocolNotify (
+ &gEfiSmmReadyToLockProtocolGuid,
+ NULL,
+ &mRegistrationSmmReadyToLock
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
+ if (mRegistrationSmmEndOfDxe != NULL) {
+ //
+ // Unregister SmmEndOfDxe notification.
+ //
+ Status = gSmst->SmmRegisterProtocolNotify (
+ &gEfiSmmEndOfDxeProtocolGuid,
+ NULL,
+ &mRegistrationSmmEndOfDxe
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
+ if (mRegistrationEndOfS3Resume != NULL) {
+ //
+ // Unregister EndOfS3Resume notification.
+ //
+ Status = gSmst->SmmRegisterProtocolNotify (
+ &gEdkiiEndOfS3ResumeGuid,
+ NULL,
+ &mRegistrationEndOfS3Resume
+ );
+ ASSERT_EFI_ERROR (Status);
+ }
+
return EFI_SUCCESS;
}
@@ -354,8 +549,16 @@ SetLockBoxAttributes (
// Basic check
//
if ((Guid == NULL) ||
- ((Attributes & ~LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE) != 0)) {
+ ((Attributes & ~(LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE | LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY)) != 0)) {
+ DEBUG ((EFI_D_INFO, "SmmLockBoxSmmLib SetLockBoxAttributes - Exit (%r)\n", EFI_INVALID_PARAMETER));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (((Attributes & LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE) != 0) &&
+ ((Attributes & LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY) != 0)) {
DEBUG ((EFI_D_INFO, "SmmLockBoxSmmLib SetLockBoxAttributes - Exit (%r)\n", EFI_INVALID_PARAMETER));
+ DEBUG ((EFI_D_INFO, " LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE and LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY\n\n"));
+ DEBUG ((EFI_D_INFO, " can not be set together\n"));
return EFI_INVALID_PARAMETER;
}
@@ -368,6 +571,16 @@ SetLockBoxAttributes (
return EFI_NOT_FOUND;
}
+ if ((((Attributes & LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE) != 0) &&
+ ((LockBox->Attributes & LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY) != 0)) ||
+ (((LockBox->Attributes & LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE) != 0) &&
+ ((Attributes & LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY) != 0))) {
+ DEBUG ((EFI_D_INFO, "SmmLockBoxSmmLib SetLockBoxAttributes 0x%lx 0x%lx - Exit (%r)\n", LockBox->Attributes, Attributes, EFI_INVALID_PARAMETER));
+ DEBUG ((EFI_D_INFO, " LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE and LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY\n\n"));
+ DEBUG ((EFI_D_INFO, " can not be set together\n"));
+ return EFI_INVALID_PARAMETER;
+ }
+
//
// Update data
//
@@ -496,6 +709,16 @@ RestoreLockBox (
return EFI_NOT_FOUND;
}
+ if (((LockBox->Attributes & LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY) != 0) &&
+ mSmmLockBoxSmmReadyToLock &&
+ !mSmmLockBoxDuringS3Resume) {
+ //
+ // With LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY,
+ // this LockBox can be restored in S3 resume only.
+ //
+ return EFI_ACCESS_DENIED;
+ }
+
//
// Set RestoreBuffer
//
diff --git a/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf b/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf
index eb7ba0bb2e89..426af4cccfe0 100644
--- a/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf
+++ b/MdeModulePkg/Library/SmmLockBoxLib/SmmLockBoxSmmLib.inf
@@ -1,7 +1,7 @@
## @file
# SMM LockBox library instance.
#
-# Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2010 - 2018, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions
@@ -44,7 +44,15 @@ [LibraryClasses]
BaseLib
DebugLib
+[Protocols]
+ gEfiSmmReadyToLockProtocolGuid ## NOTIFY
+ gEfiSmmEndOfDxeProtocolGuid ## NOTIFY
+ gEfiSmmSxDispatch2ProtocolGuid ## NOTIFY
+
[Guids]
## SOMETIMES_CONSUMES ## UNDEFINED # SmmSystemTable
## SOMETIMES_PRODUCES ## UNDEFINED # SmmSystemTable
gEfiSmmLockBoxCommunicationGuid
+ ## CONSUMES ## UNDEFINED # Protocol notify
+ gEdkiiEndOfS3ResumeGuid
+
--
2.7.0.windows.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 2/7] SecurityPkg TcgStorageOpalLib: Make it be base type really
2018-03-07 13:19 [PATCH V2 0/7] OpalPassword: New solution without SMM device code Star Zeng
2018-03-07 13:19 ` [PATCH V2 1/7] MdeModulePkg LockBoxLib: Support LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY Star Zeng
@ 2018-03-07 13:19 ` Star Zeng
2018-03-07 13:19 ` [PATCH V2 3/7] SecurityPkg TcgStorageCoreLib: " Star Zeng
` (4 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Star Zeng @ 2018-03-07 13:19 UTC (permalink / raw)
To: edk2-devel; +Cc: Star Zeng, Jiewen Yao, Eric Dong, Chao Zhang
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
---
SecurityPkg/Library/TcgStorageOpalLib/TcgStorageOpalLib.inf | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/SecurityPkg/Library/TcgStorageOpalLib/TcgStorageOpalLib.inf b/SecurityPkg/Library/TcgStorageOpalLib/TcgStorageOpalLib.inf
index ec26111ee2c3..78e47387a981 100644
--- a/SecurityPkg/Library/TcgStorageOpalLib/TcgStorageOpalLib.inf
+++ b/SecurityPkg/Library/TcgStorageOpalLib/TcgStorageOpalLib.inf
@@ -3,7 +3,7 @@
#
# This module is used to provide API used by Opal password solution.
#
-# Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
@@ -18,7 +18,7 @@ [Defines]
FILE_GUID = F8B56221-FD5D-4215-B578-C3574AD1E253
VERSION_STRING = 1.0
MODULE_TYPE = BASE
- LIBRARY_CLASS = TcgStorageOpalLib|DXE_DRIVER DXE_CORE DXE_SMM_DRIVER
+ LIBRARY_CLASS = TcgStorageOpalLib
#
# The following information is for reference only and not required by the build tools.
@@ -37,11 +37,7 @@ [LibraryClasses]
DebugLib
TimerLib
TcgStorageCoreLib
- UefiLib
[Packages]
MdePkg/MdePkg.dec
SecurityPkg/SecurityPkg.dec
-
-[Protocols]
- gEfiStorageSecurityCommandProtocolGuid ## CONSUMES
--
2.7.0.windows.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 3/7] SecurityPkg TcgStorageCoreLib: Make it be base type really
2018-03-07 13:19 [PATCH V2 0/7] OpalPassword: New solution without SMM device code Star Zeng
2018-03-07 13:19 ` [PATCH V2 1/7] MdeModulePkg LockBoxLib: Support LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY Star Zeng
2018-03-07 13:19 ` [PATCH V2 2/7] SecurityPkg TcgStorageOpalLib: Make it be base type really Star Zeng
@ 2018-03-07 13:19 ` Star Zeng
2018-03-07 13:19 ` [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM device code Star Zeng
` (3 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Star Zeng @ 2018-03-07 13:19 UTC (permalink / raw)
To: edk2-devel; +Cc: Star Zeng, Jiewen Yao, Eric Dong, Chao Zhang
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
---
SecurityPkg/Library/TcgStorageCoreLib/TcgStorageCoreLib.inf | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/SecurityPkg/Library/TcgStorageCoreLib/TcgStorageCoreLib.inf b/SecurityPkg/Library/TcgStorageCoreLib/TcgStorageCoreLib.inf
index a80cb00a9ce3..78a0557bfe42 100644
--- a/SecurityPkg/Library/TcgStorageCoreLib/TcgStorageCoreLib.inf
+++ b/SecurityPkg/Library/TcgStorageCoreLib/TcgStorageCoreLib.inf
@@ -3,7 +3,7 @@
#
# This module is used to provide API used by Opal password solution.
#
-# Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
@@ -18,7 +18,7 @@ [Defines]
FILE_GUID = ad63b09b-1fc9-4789-af0c-5af8a3fb1f9c
VERSION_STRING = 1.0
MODULE_TYPE = BASE
- LIBRARY_CLASS = TcgStorageCoreLib|DXE_DRIVER DXE_CORE DXE_SMM_DRIVER
+ LIBRARY_CLASS = TcgStorageCoreLib
#
# The following information is for reference only and not required by the build tools.
#
--
2.7.0.windows.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM device code
2018-03-07 13:19 [PATCH V2 0/7] OpalPassword: New solution without SMM device code Star Zeng
` (2 preceding siblings ...)
2018-03-07 13:19 ` [PATCH V2 3/7] SecurityPkg TcgStorageCoreLib: " Star Zeng
@ 2018-03-07 13:19 ` Star Zeng
2018-03-08 11:44 ` Yao, Jiewen
2018-03-07 13:19 ` [PATCH V2 5/7] SecurityPkg OpalPassword: Remove old solution Star Zeng
` (2 subsequent siblings)
6 siblings, 1 reply; 10+ messages in thread
From: Star Zeng @ 2018-03-07 13:19 UTC (permalink / raw)
To: edk2-devel; +Cc: Star Zeng, Jiewen Yao, Eric Dong, Chao Zhang
After IOMMU is enabled in S3, original solution with SMM device
code (OpalPasswordSmm) to unlock OPAL device for S3 will not work
as the DMA operation will be aborted without granted DMA buffer.
Instead, this solution is to add OpalPasswordPei to eliminate
SMM device code, and OPAL setup UI produced by OpalPasswordDxe
will be updated to send requests (set password, update password,
and etc), and then the requests will be processed in next boot
before SmmReadyToLock, password and device info will be saved to
lock box used by OpalPasswordPei to unlock OPAL device for S3.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
---
SecurityPkg/SecurityPkg.dsc | 2 +
SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c | 398 +++
SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c | 1335 +++++++++
SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h | 435 +++
SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c | 3003 ++++++++++++++++++++
SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h | 613 ++++
SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c | 1178 ++++++++
SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h | 380 +++
.../Tcg/Opal/OpalPassword/OpalHiiCallbacks.c | 219 ++
.../Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni | 84 +
.../Tcg/Opal/OpalPassword/OpalHiiFormValues.h | 123 +
SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c | 2144 ++++++++++++++
SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h | 455 +++
SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h | 815 ++++++
.../Tcg/Opal/OpalPassword/OpalPasswordCommon.h | 65 +
.../Tcg/Opal/OpalPassword/OpalPasswordDxe.inf | 81 +
.../Tcg/Opal/OpalPassword/OpalPasswordForm.vfr | 309 ++
.../Tcg/Opal/OpalPassword/OpalPasswordPei.c | 940 ++++++
.../Tcg/Opal/OpalPassword/OpalPasswordPei.h | 133 +
.../Tcg/Opal/OpalPassword/OpalPasswordPei.inf | 63 +
20 files changed, 12775 insertions(+)
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
diff --git a/SecurityPkg/SecurityPkg.dsc b/SecurityPkg/SecurityPkg.dsc
index 65a2fe3d7967..f82703a17b82 100644
--- a/SecurityPkg/SecurityPkg.dsc
+++ b/SecurityPkg/SecurityPkg.dsc
@@ -324,6 +324,8 @@ [Components.IA32, Components.X64]
#
SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordDxe.inf
SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf
+ SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
+ SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
[Components.IPF]
SecurityPkg/VariableAuthenticated/EsalVariableDxeSal/EsalVariableDxeSal.inf
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c b/SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
new file mode 100644
index 000000000000..ef963d0e0b62
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
@@ -0,0 +1,398 @@
+/** @file
+ UEFI Component Name(2) protocol implementation for Opal driver.
+
+Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "OpalDriver.h"
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gOpalComponentName = {
+ OpalEfiDriverComponentNameGetDriverName,
+ OpalEfiDriverComponentNameGetControllerName,
+ "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gOpalComponentName2 = {
+ OpalEfiDriverComponentName2GetDriverName,
+ OpalEfiDriverComponentName2GetControllerName,
+ "en"
+};
+
+
+/// The name of the driver in all the languages we support.
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mOpalDriverNameTable[] = {
+ { LANGUAGE_RFC_3066_ENGLISH, (CHAR16*)EFI_DRIVER_NAME_UNICODE },
+ { LANGUAGE_ISO_639_2_ENGLISH, (CHAR16*)EFI_DRIVER_NAME_UNICODE },
+ { 0, 0 }
+};
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverComponentNameGetDriverName(
+ EFI_COMPONENT_NAME_PROTOCOL* This,
+ CHAR8* Language,
+ CHAR16** DriverName
+ )
+{
+ return LookupUnicodeString2(
+ Language,
+ This->SupportedLanguages,
+ mOpalDriverNameTable,
+ DriverName,
+ TRUE
+ );
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverComponentName2GetDriverName(
+ EFI_COMPONENT_NAME2_PROTOCOL* This,
+ CHAR8* Language,
+ CHAR16** DriverName
+ )
+{
+ return LookupUnicodeString2(
+ Language,
+ This->SupportedLanguages,
+ mOpalDriverNameTable,
+ DriverName,
+ FALSE
+ );
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+GetControllerName(
+ EFI_HANDLE ControllerHandle,
+ EFI_HANDLE ChildHandle,
+ CHAR8* Language,
+ CHAR16** ControllerName
+ )
+{
+ if (Language == NULL || ControllerName == NULL || ControllerHandle == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // don't support any controller or children names
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverComponentNameGetControllerName(
+ EFI_COMPONENT_NAME_PROTOCOL* This,
+ EFI_HANDLE ControllerHandle,
+ EFI_HANDLE ChildHandle,
+ CHAR8* Language,
+ CHAR16** ControllerName
+ )
+{
+ return (GetControllerName( ControllerHandle, ChildHandle, Language, ControllerName));
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverComponentName2GetControllerName(
+ EFI_COMPONENT_NAME2_PROTOCOL* This,
+ EFI_HANDLE ControllerHandle,
+ EFI_HANDLE ChildHandle,
+ CHAR8* Language,
+ CHAR16** ControllerName
+ )
+{
+ return (GetControllerName(ControllerHandle, ChildHandle, Language, ControllerName));
+}
+
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
new file mode 100644
index 000000000000..550abacc9c75
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
@@ -0,0 +1,1335 @@
+/** @file
+ This driver is used for Opal Password Feature support at AHCI mode.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#include "OpalPasswordPei.h"
+
+/**
+ Start command for give slot on specific port.
+
+ @param AhciBar AHCI bar address.
+ @param Port The number of port.
+ @param CommandSlot The number of CommandSlot.
+ @param Timeout The timeout Value of start.
+
+ @retval EFI_DEVICE_ERROR The command start unsuccessfully.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_SUCCESS The command start successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciStartCommand (
+ IN UINT32 AhciBar,
+ IN UINT8 Port,
+ IN UINT8 CommandSlot,
+ IN UINT64 Timeout
+ );
+
+/**
+ Stop command running for giving port
+
+ @param AhciBar AHCI bar address.
+ @param Port The number of port.
+ @param Timeout The timeout Value of stop.
+
+ @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_SUCCESS The command stop successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciStopCommand (
+ IN UINT32 AhciBar,
+ IN UINT8 Port,
+ IN UINT64 Timeout
+ );
+
+/**
+ Read AHCI Operation register.
+
+ @param AhciBar AHCI bar address.
+ @param Offset The operation register offset.
+
+ @return The register content read.
+
+**/
+UINT32
+EFIAPI
+AhciReadReg (
+ IN UINT32 AhciBar,
+ IN UINT32 Offset
+ )
+{
+ UINT32 Data;
+
+ Data = 0;
+
+ Data = MmioRead32 (AhciBar + Offset);
+
+ return Data;
+}
+
+/**
+ Write AHCI Operation register.
+
+ @param AhciBar AHCI bar address.
+ @param Offset The operation register offset.
+ @param Data The Data used to write down.
+
+**/
+VOID
+EFIAPI
+AhciWriteReg (
+ IN UINT32 AhciBar,
+ IN UINT32 Offset,
+ IN UINT32 Data
+ )
+{
+ MmioWrite32 (AhciBar + Offset, Data);
+
+ return ;
+}
+
+/**
+ Do AND operation with the Value of AHCI Operation register.
+
+ @param AhciBar AHCI bar address.
+ @param Offset The operation register offset.
+ @param AndData The Data used to do AND operation.
+
+**/
+VOID
+EFIAPI
+AhciAndReg (
+ IN UINT32 AhciBar,
+ IN UINT32 Offset,
+ IN UINT32 AndData
+ )
+{
+ UINT32 Data;
+
+ Data = AhciReadReg (AhciBar, Offset);
+
+ Data &= AndData;
+
+ AhciWriteReg (AhciBar, Offset, Data);
+}
+
+/**
+ Do OR operation with the Value of AHCI Operation register.
+
+ @param AhciBar AHCI bar address.
+ @param Offset The operation register offset.
+ @param OrData The Data used to do OR operation.
+
+**/
+VOID
+EFIAPI
+AhciOrReg (
+ IN UINT32 AhciBar,
+ IN UINT32 Offset,
+ IN UINT32 OrData
+ )
+{
+ UINT32 Data;
+
+ Data = AhciReadReg (AhciBar, Offset);
+
+ Data |= OrData;
+
+ AhciWriteReg (AhciBar, Offset, Data);
+}
+
+/**
+ Wait for memory set to the test Value.
+
+ @param AhciBar AHCI bar address.
+ @param Offset The memory offset to test.
+ @param MaskValue The mask Value of memory.
+ @param TestValue The test Value of memory.
+ @param Timeout The time out Value for wait memory set.
+
+ @retval EFI_DEVICE_ERROR The memory is not set.
+ @retval EFI_TIMEOUT The memory setting is time out.
+ @retval EFI_SUCCESS The memory is correct set.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciWaitMmioSet (
+ IN UINT32 AhciBar,
+ IN UINT32 Offset,
+ IN UINT32 MaskValue,
+ IN UINT32 TestValue,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Value;
+ UINT32 Delay;
+
+ Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
+
+ do {
+ Value = AhciReadReg (AhciBar, Offset) & MaskValue;
+
+ if (Value == TestValue) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+
+ } while (Delay > 0);
+
+ return EFI_TIMEOUT;
+}
+/**
+ Wait for the Value of the specified system memory set to the test Value.
+
+ @param Address The system memory address to test.
+ @param MaskValue The mask Value of memory.
+ @param TestValue The test Value of memory.
+ @param Timeout The time out Value for wait memory set, uses 100ns as a unit.
+
+ @retval EFI_TIMEOUT The system memory setting is time out.
+ @retval EFI_SUCCESS The system memory is correct set.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciWaitMemSet (
+ IN EFI_PHYSICAL_ADDRESS Address,
+ IN UINT32 MaskValue,
+ IN UINT32 TestValue,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Value;
+ UINT32 Delay;
+
+ Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
+
+ do {
+ //
+ // Access sytem memory to see if the Value is the tested one.
+ //
+ // The system memory pointed by Address will be updated by the
+ // SATA Host Controller, "volatile" is introduced to prevent
+ // compiler from optimizing the access to the memory address
+ // to only read once.
+ //
+ Value = *(volatile UINT32 *) (UINTN) Address;
+ Value &= MaskValue;
+
+ if (Value == TestValue) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay (100);
+
+ Delay--;
+
+ } while (Delay > 0);
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ Check the memory status to the test Value.
+
+ @param[in] Address The memory address to test.
+ @param[in] MaskValue The mask Value of memory.
+ @param[in] TestValue The test Value of memory.
+ @param[in, out] RetryTimes The retry times Value for waitting memory set. If 0, then just try once.
+
+ @retval EFI_NOTREADY The memory is not set.
+ @retval EFI_TIMEOUT The memory setting retry times out.
+ @retval EFI_SUCCESS The memory is correct set.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciCheckMemSet (
+ IN UINTN Address,
+ IN UINT32 MaskValue,
+ IN UINT32 TestValue,
+ IN OUT UINTN *RetryTimes OPTIONAL
+ )
+{
+ UINT32 Value;
+
+ if (RetryTimes != NULL) {
+ (*RetryTimes)--;
+ }
+
+ Value = *(volatile UINT32 *) Address;
+ Value &= MaskValue;
+
+ if (Value == TestValue) {
+ return EFI_SUCCESS;
+ }
+
+ if ((RetryTimes != NULL) && (*RetryTimes == 0)) {
+ return EFI_TIMEOUT;
+ } else {
+ return EFI_NOT_READY;
+ }
+}
+
+/**
+ Clear the port interrupt and error status. It will also clear
+ HBA interrupt status.
+
+ @param AhciBar AHCI bar address.
+ @param Port The number of port.
+
+**/
+VOID
+EFIAPI
+AhciClearPortStatus (
+ IN UINT32 AhciBar,
+ IN UINT8 Port
+ )
+{
+ UINT32 Offset;
+
+ //
+ // Clear any error status
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
+ AhciWriteReg (AhciBar, Offset, AhciReadReg (AhciBar, Offset));
+
+ //
+ // Clear any port interrupt status
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS;
+ AhciWriteReg (AhciBar, Offset, AhciReadReg (AhciBar, Offset));
+
+ //
+ // Clear any HBA interrupt status
+ //
+ AhciWriteReg (AhciBar, EFI_AHCI_IS_OFFSET, AhciReadReg (AhciBar, EFI_AHCI_IS_OFFSET));
+}
+
+/**
+ Enable the FIS running for giving port.
+
+ @param AhciBar AHCI bar address.
+ @param Port The number of port.
+ @param Timeout The timeout Value of enabling FIS.
+
+ @retval EFI_DEVICE_ERROR The FIS enable setting fails.
+ @retval EFI_TIMEOUT The FIS enable setting is time out.
+ @retval EFI_SUCCESS The FIS enable successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciEnableFisReceive (
+ IN UINT32 AhciBar,
+ IN UINT8 Port,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Offset;
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_FRE);
+
+ return AhciWaitMmioSet (
+ AhciBar,
+ Offset,
+ EFI_AHCI_PORT_CMD_FR,
+ EFI_AHCI_PORT_CMD_FR,
+ Timeout
+ );
+}
+
+/**
+ Disable the FIS running for giving port.
+
+ @param AhciBar AHCI bar address.
+ @param Port The number of port.
+ @param Timeout The timeout Value of disabling FIS.
+
+ @retval EFI_DEVICE_ERROR The FIS disable setting fails.
+ @retval EFI_TIMEOUT The FIS disable setting is time out.
+ @retval EFI_UNSUPPORTED The port is in running state.
+ @retval EFI_SUCCESS The FIS disable successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciDisableFisReceive (
+ IN UINT32 AhciBar,
+ IN UINT8 Port,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Offset;
+ UINT32 Data;
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ Data = AhciReadReg (AhciBar, Offset);
+
+ //
+ // Before disabling Fis receive, the DMA engine of the port should NOT be in running status.
+ //
+ if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) != 0) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Check if the Fis receive DMA engine for the port is running.
+ //
+ if ((Data & EFI_AHCI_PORT_CMD_FR) != EFI_AHCI_PORT_CMD_FR) {
+ return EFI_SUCCESS;
+ }
+
+ AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_FRE));
+
+ return AhciWaitMmioSet (
+ AhciBar,
+ Offset,
+ EFI_AHCI_PORT_CMD_FR,
+ 0,
+ Timeout
+ );
+}
+
+/**
+ Build the command list, command table and prepare the fis receiver.
+
+ @param AhciContext The pointer to the AHCI_CONTEXT.
+ @param Port The number of port.
+ @param PortMultiplier The timeout Value of stop.
+ @param CommandFis The control fis will be used for the transfer.
+ @param CommandList The command list will be used for the transfer.
+ @param AtapiCommand The atapi command will be used for the transfer.
+ @param AtapiCommandLength The Length of the atapi command.
+ @param CommandSlotNumber The command slot will be used for the transfer.
+ @param DataPhysicalAddr The pointer to the Data Buffer pci bus master address.
+ @param DataLength The Data count to be transferred.
+
+**/
+VOID
+EFIAPI
+AhciBuildCommand (
+ IN AHCI_CONTEXT *AhciContext,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_COMMAND_FIS *CommandFis,
+ IN EFI_AHCI_COMMAND_LIST *CommandList,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN UINT8 CommandSlotNumber,
+ IN OUT VOID *DataPhysicalAddr,
+ IN UINT64 DataLength
+ )
+{
+ EFI_AHCI_REGISTERS *AhciRegisters;
+ UINT32 AhciBar;
+ UINT64 BaseAddr;
+ UINT64 PrdtNumber;
+ UINTN RemainedData;
+ UINTN MemAddr;
+ DATA_64 Data64;
+ UINT32 Offset;
+
+ AhciRegisters = &AhciContext->AhciRegisters;
+ AhciBar = AhciContext->AhciBar;
+
+ //
+ // Filling the PRDT
+ //
+ PrdtNumber = DivU64x32 (DataLength + EFI_AHCI_MAX_DATA_PER_PRDT - 1, EFI_AHCI_MAX_DATA_PER_PRDT);
+
+ //
+ // According to AHCI 1.3 spec, a PRDT entry can point to a maximum 4MB Data block.
+ // It also limits that the maximum amount of the PRDT entry in the command table
+ // is 65535.
+ //
+ ASSERT (PrdtNumber <= 1);
+
+ Data64.Uint64 = (UINTN) (AhciRegisters->AhciRFis);
+
+ BaseAddr = Data64.Uint64;
+
+ ZeroMem ((VOID *)((UINTN) BaseAddr), sizeof (EFI_AHCI_RECEIVED_FIS));
+
+ ZeroMem (AhciRegisters->AhciCommandTable, sizeof (EFI_AHCI_COMMAND_TABLE));
+
+ CommandFis->AhciCFisPmNum = PortMultiplier;
+
+ CopyMem (&AhciRegisters->AhciCommandTable->CommandFis, CommandFis, sizeof (EFI_AHCI_COMMAND_FIS));
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ if (AtapiCommand != NULL) {
+ CopyMem (
+ &AhciRegisters->AhciCommandTable->AtapiCmd,
+ AtapiCommand,
+ AtapiCommandLength
+ );
+
+ CommandList->AhciCmdA = 1;
+ CommandList->AhciCmdP = 1;
+
+ AhciOrReg (AhciBar, Offset, (EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
+ } else {
+ AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
+ }
+
+ RemainedData = (UINTN) DataLength;
+ MemAddr = (UINTN) DataPhysicalAddr;
+ CommandList->AhciCmdPrdtl = (UINT32)PrdtNumber;
+
+ AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbc = (UINT32)RemainedData - 1;
+
+ Data64.Uint64 = (UINT64)MemAddr;
+ AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDba = Data64.Uint32.Lower32;
+ AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbau = Data64.Uint32.Upper32;
+
+ //
+ // Set the last PRDT to Interrupt On Complete
+ //
+ AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtIoc = 1;
+
+ CopyMem (
+ (VOID *) ((UINTN) AhciRegisters->AhciCmdList + (UINTN) CommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST)),
+ CommandList,
+ sizeof (EFI_AHCI_COMMAND_LIST)
+ );
+
+ Data64.Uint64 = (UINT64)(UINTN) AhciRegisters->AhciCommandTable;
+ AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtba = Data64.Uint32.Lower32;
+ AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtbau = Data64.Uint32.Upper32;
+ AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdPmp = PortMultiplier;
+
+}
+
+/**
+ Buid a command FIS.
+
+ @param CmdFis A pointer to the EFI_AHCI_COMMAND_FIS Data structure.
+ @param AtaCommandBlock A pointer to the AhciBuildCommandFis Data structure.
+
+**/
+VOID
+EFIAPI
+AhciBuildCommandFis (
+ IN OUT EFI_AHCI_COMMAND_FIS *CmdFis,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock
+ )
+{
+ ZeroMem (CmdFis, sizeof (EFI_AHCI_COMMAND_FIS));
+
+ CmdFis->AhciCFisType = EFI_AHCI_FIS_REGISTER_H2D;
+ //
+ // Indicator it's a command
+ //
+ CmdFis->AhciCFisCmdInd = 0x1;
+ CmdFis->AhciCFisCmd = AtaCommandBlock->AtaCommand;
+
+ CmdFis->AhciCFisFeature = AtaCommandBlock->AtaFeatures;
+ CmdFis->AhciCFisFeatureExp = AtaCommandBlock->AtaFeaturesExp;
+
+ CmdFis->AhciCFisSecNum = AtaCommandBlock->AtaSectorNumber;
+ CmdFis->AhciCFisSecNumExp = AtaCommandBlock->AtaSectorNumberExp;
+
+ CmdFis->AhciCFisClyLow = AtaCommandBlock->AtaCylinderLow;
+ CmdFis->AhciCFisClyLowExp = AtaCommandBlock->AtaCylinderLowExp;
+
+ CmdFis->AhciCFisClyHigh = AtaCommandBlock->AtaCylinderHigh;
+ CmdFis->AhciCFisClyHighExp = AtaCommandBlock->AtaCylinderHighExp;
+
+ CmdFis->AhciCFisSecCount = AtaCommandBlock->AtaSectorCount;
+ CmdFis->AhciCFisSecCountExp = AtaCommandBlock->AtaSectorCountExp;
+
+ CmdFis->AhciCFisDevHead = (UINT8) (AtaCommandBlock->AtaDeviceHead | 0xE0);
+}
+
+/**
+ Start a PIO Data transfer on specific port.
+
+ @param AhciContext The pointer to the AHCI_CONTEXT.
+ @param Port The number of port.
+ @param PortMultiplier The timeout Value of stop.
+ @param AtapiCommand The atapi command will be used for the transfer.
+ @param AtapiCommandLength The Length of the atapi command.
+ @param Read The transfer direction.
+ @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
+ @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
+ @param MemoryAddr The pointer to the Data Buffer.
+ @param DataCount The Data count to be transferred.
+ @param Timeout The timeout Value of non Data transfer.
+
+ @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The PIO Data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciPioTransfer (
+ IN AHCI_CONTEXT *AhciContext,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN OUT VOID *MemoryAddr,
+ IN UINT32 DataCount,
+ IN UINT64 Timeout
+ )
+{
+ EFI_STATUS Status;
+ EFI_AHCI_REGISTERS *AhciRegisters;
+ UINT32 AhciBar;
+ UINT32 FisBaseAddr;
+ UINT32 Offset;
+ UINT32 Delay;
+ EFI_AHCI_COMMAND_FIS CFis;
+ EFI_AHCI_COMMAND_LIST CmdList;
+ UINT32 PortTfd;
+ UINT32 PrdCount;
+ UINT32 OldRfisLo;
+ UINT32 OldRfisHi;
+ UINT32 OldCmdListLo;
+ UINT32 OldCmdListHi;
+
+ AhciRegisters = &AhciContext->AhciRegisters;
+ AhciBar = AhciContext->AhciBar;
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
+ OldRfisLo = AhciReadReg (AhciBar, Offset);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
+ OldRfisHi = AhciReadReg (AhciBar, Offset);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
+ AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciRFis);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
+ AhciWriteReg (AhciBar, Offset, 0);
+
+ //
+ // Single task envrionment, we only use one command table for all port
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
+ OldCmdListLo = AhciReadReg (AhciBar, Offset);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
+ OldCmdListHi = AhciReadReg (AhciBar, Offset);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
+ AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciCmdList);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
+ AhciWriteReg (AhciBar, Offset, 0);
+
+ //
+ // Package read needed
+ //
+ AhciBuildCommandFis (&CFis, AtaCommandBlock);
+
+ ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
+
+ CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
+ CmdList.AhciCmdW = Read ? 0 : 1;
+
+ AhciBuildCommand (
+ AhciContext,
+ Port,
+ PortMultiplier,
+ &CFis,
+ &CmdList,
+ AtapiCommand,
+ AtapiCommandLength,
+ 0,
+ MemoryAddr,
+ DataCount
+ );
+
+ Status = AhciStartCommand (
+ AhciBar,
+ Port,
+ 0,
+ Timeout
+ );
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+
+ //
+ // Checking the status and wait the driver sending Data
+ //
+ FisBaseAddr = (UINT32)(UINTN)AhciRegisters->AhciRFis;
+ if (Read && (AtapiCommand == 0)) {
+ //
+ // Wait device sends the PIO setup fis before Data transfer
+ //
+ Status = EFI_TIMEOUT;
+ Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
+ do {
+ Offset = FisBaseAddr + EFI_AHCI_PIO_FIS_OFFSET;
+
+ Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_PIO_SETUP, 0);
+ if (!EFI_ERROR (Status)) {
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+ PortTfd = AhciReadReg (AhciBar, (UINT32) Offset);
+ //
+ // PxTFD will be updated if there is a D2H or SetupFIS received.
+ // For PIO IN transfer, D2H means a device error. Therefore we only need to check the TFD after receiving a SetupFIS.
+ //
+ if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ PrdCount = *(volatile UINT32 *) (&(AhciRegisters->AhciCmdList[0].AhciCmdPrdbc));
+ if (PrdCount == DataCount) {
+ break;
+ }
+ }
+
+ Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
+ Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_REGISTER_D2H, 0);
+ if (!EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ break;
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay(100);
+
+ Delay--;
+ } while (Delay > 0);
+ } else {
+ //
+ // Wait for D2H Fis is received
+ //
+ Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
+ Status = AhciWaitMemSet (
+ Offset,
+ EFI_AHCI_FIS_TYPE_MASK,
+ EFI_AHCI_FIS_REGISTER_D2H,
+ Timeout
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto Exit;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+ PortTfd = AhciReadReg (AhciBar, (UINT32) Offset);
+ if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
+ Status = EFI_DEVICE_ERROR;
+ }
+ }
+
+Exit:
+ AhciStopCommand (
+ AhciBar,
+ Port,
+ Timeout
+ );
+
+ AhciDisableFisReceive (
+ AhciBar,
+ Port,
+ Timeout
+ );
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
+ AhciWriteReg (AhciBar, Offset, OldRfisLo);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
+ AhciWriteReg (AhciBar, Offset, OldRfisHi);
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
+ AhciWriteReg (AhciBar, Offset, OldCmdListLo);
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
+ AhciWriteReg (AhciBar, Offset, OldCmdListHi);
+
+ return Status;
+}
+
+/**
+ Stop command running for giving port
+
+ @param AhciBar AHCI bar address.
+ @param Port The number of port.
+ @param Timeout The timeout Value of stop.
+
+ @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_SUCCESS The command stop successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciStopCommand (
+ IN UINT32 AhciBar,
+ IN UINT8 Port,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Offset;
+ UINT32 Data;
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ Data = AhciReadReg (AhciBar, Offset);
+
+ if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) == 0) {
+ return EFI_SUCCESS;
+ }
+
+ if ((Data & EFI_AHCI_PORT_CMD_ST) != 0) {
+ AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_ST));
+ }
+
+ return AhciWaitMmioSet (
+ AhciBar,
+ Offset,
+ EFI_AHCI_PORT_CMD_CR,
+ 0,
+ Timeout
+ );
+}
+
+/**
+ Start command for give slot on specific port.
+
+ @param AhciBar AHCI bar address.
+ @param Port The number of port.
+ @param CommandSlot The number of CommandSlot.
+ @param Timeout The timeout Value of start.
+
+ @retval EFI_DEVICE_ERROR The command start unsuccessfully.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_SUCCESS The command start successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciStartCommand (
+ IN UINT32 AhciBar,
+ IN UINT8 Port,
+ IN UINT8 CommandSlot,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 CmdSlotBit;
+ EFI_STATUS Status;
+ UINT32 PortStatus;
+ UINT32 StartCmd;
+ UINT32 PortTfd;
+ UINT32 Offset;
+ UINT32 Capability;
+
+ //
+ // Collect AHCI controller information
+ //
+ Capability = AhciReadReg(AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
+
+ CmdSlotBit = (UINT32) (1 << CommandSlot);
+
+ AhciClearPortStatus (
+ AhciBar,
+ Port
+ );
+
+ Status = AhciEnableFisReceive (
+ AhciBar,
+ Port,
+ Timeout
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ PortStatus = AhciReadReg (AhciBar, Offset);
+
+ StartCmd = 0;
+ if ((PortStatus & EFI_AHCI_PORT_CMD_ALPE) != 0) {
+ StartCmd = AhciReadReg (AhciBar, Offset);
+ StartCmd &= ~EFI_AHCI_PORT_CMD_ICC_MASK;
+ StartCmd |= EFI_AHCI_PORT_CMD_ACTIVE;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+ PortTfd = AhciReadReg (AhciBar, Offset);
+
+ if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0) {
+ if ((Capability & BIT24) != 0) {
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_COL);
+
+ AhciWaitMmioSet (
+ AhciBar,
+ Offset,
+ EFI_AHCI_PORT_CMD_COL,
+ 0,
+ Timeout
+ );
+ }
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_ST | StartCmd);
+
+ //
+ // Setting the command
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SACT;
+ AhciAndReg (AhciBar, Offset, 0);
+ AhciOrReg (AhciBar, Offset, CmdSlotBit);
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CI;
+ AhciAndReg (AhciBar, Offset, 0);
+ AhciOrReg (AhciBar, Offset, CmdSlotBit);
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Do AHCI HBA reset.
+
+ @param[in] AhciBar AHCI bar address.
+ @param[in] Timeout The timeout Value of reset.
+
+ @retval EFI_DEVICE_ERROR AHCI controller is failed to complete hardware reset.
+ @retval EFI_TIMEOUT The reset operation is time out.
+ @retval EFI_SUCCESS AHCI controller is reset successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciReset (
+ IN UINT32 AhciBar,
+ IN UINT64 Timeout
+ )
+{
+ UINT32 Delay;
+ UINT32 Value;
+ UINT32 Capability;
+
+ //
+ // Collect AHCI controller information
+ //
+ Capability = AhciReadReg (AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
+
+ //
+ // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only is not set
+ //
+ if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
+ AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
+ }
+
+ AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_RESET);
+
+ Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
+
+ do {
+ Value = AhciReadReg(AhciBar, EFI_AHCI_GHC_OFFSET);
+ if ((Value & EFI_AHCI_GHC_RESET) == 0) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Stall for 100 microseconds.
+ //
+ MicroSecondDelay(100);
+
+ Delay--;
+ } while (Delay > 0);
+
+ return EFI_TIMEOUT;
+
+
+}
+
+/**
+ Send Buffer cmd to specific device.
+
+ @param[in] AhciContext The pointer to the AHCI_CONTEXT.
+ @param[in] Port The port number of attached ATA device.
+ @param[in] PortMultiplier The port number of port multiplier of attached ATA device.
+ @param[in, out] Buffer The Data Buffer to store IDENTIFY PACKET Data.
+
+ @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for executing.
+ @retval EFI_SUCCESS The cmd executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciIdentify (
+ IN AHCI_CONTEXT *AhciContext,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN OUT ATA_IDENTIFY_DATA *Buffer
+ )
+{
+ EFI_STATUS Status;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+
+ if (AhciContext == NULL || Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
+
+ AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE;
+ AtaCommandBlock.AtaSectorCount = 1;
+
+ Status = AhciPioTransfer (
+ AhciContext,
+ Port,
+ PortMultiplier,
+ NULL,
+ 0,
+ TRUE,
+ &AtaCommandBlock,
+ NULL,
+ Buffer,
+ sizeof (ATA_IDENTIFY_DATA),
+ ATA_TIMEOUT
+ );
+
+ return Status;
+}
+
+/**
+ Allocate transfer-related data struct which is used at AHCI mode.
+
+ @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
+
+ @retval EFI_OUT_OF_RESOURCE No enough resource.
+ @retval EFI_SUCCESS Successful to allocate resource.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciAllocateResource (
+ IN OUT AHCI_CONTEXT *AhciContext
+ )
+{
+ EFI_STATUS Status;
+ EFI_AHCI_REGISTERS *AhciRegisters;
+ EFI_PHYSICAL_ADDRESS DeviceAddress;
+ VOID *Base;
+ VOID *Mapping;
+
+ AhciRegisters = &AhciContext->AhciRegisters;
+
+ //
+ // Allocate resources required by AHCI host controller.
+ //
+ Status = IoMmuAllocateBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
+ &Base,
+ &DeviceAddress,
+ &Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
+ AhciRegisters->AhciRFisMapping = Mapping;
+ AhciRegisters->AhciRFis = Base;
+ ZeroMem (AhciRegisters->AhciRFis, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)));
+
+ Status = IoMmuAllocateBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
+ &Base,
+ &DeviceAddress,
+ &Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
+ AhciRegisters->AhciRFis,
+ AhciRegisters->AhciRFisMapping
+ );
+ AhciRegisters->AhciRFis = NULL;
+ return EFI_OUT_OF_RESOURCES;
+ }
+ ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
+ AhciRegisters->AhciCmdListMapping = Mapping;
+ AhciRegisters->AhciCmdList = Base;
+ ZeroMem (AhciRegisters->AhciCmdList, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)));
+
+ Status = IoMmuAllocateBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)),
+ &Base,
+ &DeviceAddress,
+ &Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
+ AhciRegisters->AhciRFis,
+ AhciRegisters->AhciRFisMapping
+ );
+ AhciRegisters->AhciRFis = NULL;
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
+ AhciRegisters->AhciCmdList,
+ AhciRegisters->AhciCmdListMapping
+ );
+ AhciRegisters->AhciCmdList = NULL;
+ return EFI_OUT_OF_RESOURCES;
+ }
+ ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
+ AhciRegisters->AhciCommandTableMapping = Mapping;
+ AhciRegisters->AhciCommandTable = Base;
+ ZeroMem (AhciRegisters->AhciCommandTable, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)));
+
+ //
+ // Allocate resources for data transfer.
+ //
+ Status = IoMmuAllocateBuffer (
+ EFI_SIZE_TO_PAGES (HDD_PAYLOAD),
+ &Base,
+ &DeviceAddress,
+ &Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
+ AhciRegisters->AhciRFis,
+ AhciRegisters->AhciRFisMapping
+ );
+ AhciRegisters->AhciRFis = NULL;
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
+ AhciRegisters->AhciCmdList,
+ AhciRegisters->AhciCmdListMapping
+ );
+ AhciRegisters->AhciCmdList = NULL;
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
+ AhciRegisters->AhciCommandTable,
+ AhciRegisters->AhciCommandTableMapping
+ );
+ AhciRegisters->AhciCommandTable = NULL;
+
+ return EFI_OUT_OF_RESOURCES;
+ }
+ ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
+ AhciContext->BufferMapping = Mapping;
+ AhciContext->Buffer = Base;
+ ZeroMem (AhciContext->Buffer, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (HDD_PAYLOAD));
+
+ DEBUG ((
+ DEBUG_INFO,
+ "%a() AhciContext 0x%x 0x%x 0x%x 0x%x\n",
+ __FUNCTION__,
+ AhciContext->Buffer,
+ AhciRegisters->AhciRFis,
+ AhciRegisters->AhciCmdList,
+ AhciRegisters->AhciCommandTable
+ ));
+ return EFI_SUCCESS;
+}
+
+/**
+ Free allocated transfer-related data struct which is used at AHCI mode.
+
+ @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
+
+**/
+VOID
+EFIAPI
+AhciFreeResource (
+ IN OUT AHCI_CONTEXT *AhciContext
+ )
+{
+ EFI_AHCI_REGISTERS *AhciRegisters;
+
+ AhciRegisters = &AhciContext->AhciRegisters;
+
+ if (AhciRegisters->AhciRFis != NULL) {
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
+ AhciRegisters->AhciRFis,
+ AhciRegisters->AhciRFisMapping
+ );
+ AhciRegisters->AhciRFis = NULL;
+ }
+
+ if (AhciRegisters->AhciCmdList != NULL) {
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
+ AhciRegisters->AhciCmdList,
+ AhciRegisters->AhciCmdListMapping
+ );
+ AhciRegisters->AhciCmdList = NULL;
+ }
+
+ if (AhciRegisters->AhciCommandTable != NULL) {
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)),
+ AhciRegisters->AhciCommandTable,
+ AhciRegisters->AhciCommandTableMapping
+ );
+ AhciRegisters->AhciCommandTable = NULL;
+ }
+
+ if (AhciContext->Buffer != NULL) {
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (HDD_PAYLOAD),
+ AhciContext->Buffer,
+ AhciContext->BufferMapping
+ );
+ AhciContext->Buffer = NULL;
+ }
+}
+
+/**
+ Initialize ATA host controller at AHCI mode.
+
+ The function is designed to initialize ATA host controller.
+
+ @param[in] AhciContext The pointer to the AHCI_CONTEXT.
+ @param[in] Port The port number to do initialization.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciModeInitialize (
+ IN AHCI_CONTEXT *AhciContext,
+ IN UINT8 Port
+ )
+{
+ EFI_STATUS Status;
+ EFI_AHCI_REGISTERS *AhciRegisters;
+ UINT32 AhciBar;
+ UINT32 Capability;
+ UINT32 Offset;
+ UINT32 Data;
+ UINT32 PhyDetectDelay;
+
+ AhciRegisters = &AhciContext->AhciRegisters;
+ AhciBar = AhciContext->AhciBar;
+
+ Status = AhciReset (AhciBar, ATA_TIMEOUT);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Collect AHCI controller information
+ //
+ Capability = AhciReadReg (AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
+
+ //
+ // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only is not set
+ //
+ if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
+ AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
+ AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciRFis);
+
+ //
+ // Single task envrionment, we only use one command table for all port
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
+ AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciCmdList);
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
+ Data = AhciReadReg (AhciBar, Offset);
+ if ((Data & EFI_AHCI_PORT_CMD_CPD) != 0) {
+ AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_POD);
+ }
+
+ if ((Capability & BIT27) != 0) {
+ AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_SUD);
+ }
+
+ //
+ // Disable aggressive power management.
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL;
+ AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_SCTL_IPM_INIT);
+ //
+ // Disable the reporting of the corresponding interrupt to system software.
+ //
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IE;
+ AhciAndReg (AhciBar, Offset, 0);
+
+ Status = AhciEnableFisReceive (
+ AhciBar,
+ Port,
+ 5000000
+ );
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // According to SATA1.0a spec section 5.2, we need to wait for PxTFD.BSY and PxTFD.DRQ
+ // and PxTFD.ERR to be zero. The maximum wait time is 16s which is defined at ATA spec.
+ //
+ PhyDetectDelay = 16 * 1000;
+ do {
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
+ if (AhciReadReg(AhciBar, Offset) != 0) {
+ AhciWriteReg (AhciBar, Offset, AhciReadReg(AhciBar, Offset));
+ }
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
+
+ Data = AhciReadReg (AhciBar, Offset) & EFI_AHCI_PORT_TFD_MASK;
+ if (Data == 0) {
+ break;
+ }
+
+ MicroSecondDelay (1000);
+ PhyDetectDelay--;
+ } while (PhyDetectDelay > 0);
+
+ if (PhyDetectDelay == 0) {
+ return EFI_NOT_FOUND;
+ }
+
+ Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SIG;
+ Status = AhciWaitMmioSet (
+ AhciBar,
+ Offset,
+ 0x0000FFFF,
+ 0x00000101,
+ 160000000
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return Status;
+}
+
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
new file mode 100644
index 000000000000..b1d6ed13d5b9
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
@@ -0,0 +1,435 @@
+/** @file
+ Header file for AHCI mode of ATA host controller.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#ifndef __OPAL_PASSWORD_AHCI_MODE_H__
+#define __OPAL_PASSWORD_AHCI_MODE_H__
+
+//
+// OPAL LIBRARY CALLBACKS
+//
+#define ATA_COMMAND_TRUSTED_RECEIVE 0x5C
+#define ATA_COMMAND_TRUSTED_SEND 0x5E
+
+//
+// ATA TRUSTED commands express transfer Length in 512 byte multiple
+//
+#define ATA_TRUSTED_TRANSFER_LENGTH_MULTIPLE 512
+#define ATA_DEVICE_LBA 0x40 ///< Set for commands with LBA (rather than CHS) addresses
+
+
+#define EFI_AHCI_BAR_INDEX 0x05
+
+#define EFI_AHCI_CAPABILITY_OFFSET 0x0000
+#define EFI_AHCI_CAP_SAM BIT18
+#define EFI_AHCI_GHC_OFFSET 0x0004
+#define EFI_AHCI_GHC_RESET BIT0
+#define EFI_AHCI_GHC_IE BIT1
+#define EFI_AHCI_GHC_ENABLE BIT31
+#define EFI_AHCI_IS_OFFSET 0x0008
+#define EFI_AHCI_PI_OFFSET 0x000C
+
+typedef struct {
+ UINT32 Lower32;
+ UINT32 Upper32;
+} DATA_32;
+
+typedef union {
+ DATA_32 Uint32;
+ UINT64 Uint64;
+} DATA_64;
+
+//
+// Each PRDT entry can point to a memory block up to 4M byte
+//
+#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000
+
+#define EFI_AHCI_FIS_REGISTER_H2D 0x27 //Register FIS - Host to Device
+#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
+#define EFI_AHCI_FIS_REGISTER_D2H 0x34 //Register FIS - Device to Host
+#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20
+#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 //DMA Activate FIS - Device to Host
+#define EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH 4
+#define EFI_AHCI_FIS_DMA_SETUP 0x41 //DMA Setup FIS - Bi-directional
+#define EFI_AHCI_FIS_DMA_SETUP_LENGTH 28
+#define EFI_AHCI_FIS_DATA 0x46 //Data FIS - Bi-directional
+#define EFI_AHCI_FIS_BIST 0x58 //BIST Activate FIS - Bi-directional
+#define EFI_AHCI_FIS_BIST_LENGTH 12
+#define EFI_AHCI_FIS_PIO_SETUP 0x5F //PIO Setup FIS - Device to Host
+#define EFI_AHCI_FIS_PIO_SETUP_LENGTH 20
+#define EFI_AHCI_FIS_SET_DEVICE 0xA1 //Set Device Bits FIS - Device to Host
+#define EFI_AHCI_FIS_SET_DEVICE_LENGTH 8
+
+#define EFI_AHCI_D2H_FIS_OFFSET 0x40
+#define EFI_AHCI_DMA_FIS_OFFSET 0x00
+#define EFI_AHCI_PIO_FIS_OFFSET 0x20
+#define EFI_AHCI_SDB_FIS_OFFSET 0x58
+#define EFI_AHCI_FIS_TYPE_MASK 0xFF
+#define EFI_AHCI_U_FIS_OFFSET 0x60
+
+//
+// Port register
+//
+#define EFI_AHCI_PORT_START 0x0100
+#define EFI_AHCI_PORT_REG_WIDTH 0x0080
+#define EFI_AHCI_PORT_CLB 0x0000
+#define EFI_AHCI_PORT_CLBU 0x0004
+#define EFI_AHCI_PORT_FB 0x0008
+#define EFI_AHCI_PORT_FBU 0x000C
+#define EFI_AHCI_PORT_IS 0x0010
+#define EFI_AHCI_PORT_IS_DHRS BIT0
+#define EFI_AHCI_PORT_IS_PSS BIT1
+#define EFI_AHCI_PORT_IS_SSS BIT2
+#define EFI_AHCI_PORT_IS_SDBS BIT3
+#define EFI_AHCI_PORT_IS_UFS BIT4
+#define EFI_AHCI_PORT_IS_DPS BIT5
+#define EFI_AHCI_PORT_IS_PCS BIT6
+#define EFI_AHCI_PORT_IS_DIS BIT7
+#define EFI_AHCI_PORT_IS_PRCS BIT22
+#define EFI_AHCI_PORT_IS_IPMS BIT23
+#define EFI_AHCI_PORT_IS_OFS BIT24
+#define EFI_AHCI_PORT_IS_INFS BIT26
+#define EFI_AHCI_PORT_IS_IFS BIT27
+#define EFI_AHCI_PORT_IS_HBDS BIT28
+#define EFI_AHCI_PORT_IS_HBFS BIT29
+#define EFI_AHCI_PORT_IS_TFES BIT30
+#define EFI_AHCI_PORT_IS_CPDS BIT31
+#define EFI_AHCI_PORT_IS_CLEAR 0xFFFFFFFF
+#define EFI_AHCI_PORT_IS_FIS_CLEAR 0x0000000F
+
+#define EFI_AHCI_PORT_IE 0x0014
+#define EFI_AHCI_PORT_CMD 0x0018
+#define EFI_AHCI_PORT_CMD_ST_MASK 0xFFFFFFFE
+#define EFI_AHCI_PORT_CMD_ST BIT0
+#define EFI_AHCI_PORT_CMD_SUD BIT1
+#define EFI_AHCI_PORT_CMD_POD BIT2
+#define EFI_AHCI_PORT_CMD_COL BIT3
+#define EFI_AHCI_PORT_CMD_CR BIT15
+#define EFI_AHCI_PORT_CMD_FRE BIT4
+#define EFI_AHCI_PORT_CMD_FR BIT14
+#define EFI_AHCI_PORT_CMD_MASK ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE | EFI_AHCI_PORT_CMD_COL)
+#define EFI_AHCI_PORT_CMD_PMA BIT17
+#define EFI_AHCI_PORT_CMD_HPCP BIT18
+#define EFI_AHCI_PORT_CMD_MPSP BIT19
+#define EFI_AHCI_PORT_CMD_CPD BIT20
+#define EFI_AHCI_PORT_CMD_ESP BIT21
+#define EFI_AHCI_PORT_CMD_ATAPI BIT24
+#define EFI_AHCI_PORT_CMD_DLAE BIT25
+#define EFI_AHCI_PORT_CMD_ALPE BIT26
+#define EFI_AHCI_PORT_CMD_ASP BIT27
+#define EFI_AHCI_PORT_CMD_ICC_MASK (BIT28 | BIT29 | BIT30 | BIT31)
+#define EFI_AHCI_PORT_CMD_ACTIVE (1 << 28 )
+#define EFI_AHCI_PORT_TFD 0x0020
+#define EFI_AHCI_PORT_TFD_MASK (BIT7 | BIT3 | BIT0)
+#define EFI_AHCI_PORT_TFD_BSY BIT7
+#define EFI_AHCI_PORT_TFD_DRQ BIT3
+#define EFI_AHCI_PORT_TFD_ERR BIT0
+#define EFI_AHCI_PORT_TFD_ERR_MASK 0x00FF00
+#define EFI_AHCI_PORT_SIG 0x0024
+#define EFI_AHCI_PORT_SSTS 0x0028
+#define EFI_AHCI_PORT_SSTS_DET_MASK 0x000F
+#define EFI_AHCI_PORT_SSTS_DET 0x0001
+#define EFI_AHCI_PORT_SSTS_DET_PCE 0x0003
+#define EFI_AHCI_PORT_SSTS_SPD_MASK 0x00F0
+#define EFI_AHCI_PORT_SCTL 0x002C
+#define EFI_AHCI_PORT_SCTL_DET_MASK 0x000F
+#define EFI_AHCI_PORT_SCTL_MASK (~EFI_AHCI_PORT_SCTL_DET_MASK)
+#define EFI_AHCI_PORT_SCTL_DET_INIT 0x0001
+#define EFI_AHCI_PORT_SCTL_DET_PHYCOMM 0x0003
+#define EFI_AHCI_PORT_SCTL_SPD_MASK 0x00F0
+#define EFI_AHCI_PORT_SCTL_IPM_MASK 0x0F00
+#define EFI_AHCI_PORT_SCTL_IPM_INIT 0x0300
+#define EFI_AHCI_PORT_SCTL_IPM_PSD 0x0100
+#define EFI_AHCI_PORT_SCTL_IPM_SSD 0x0200
+#define EFI_AHCI_PORT_SERR 0x0030
+#define EFI_AHCI_PORT_SERR_RDIE BIT0
+#define EFI_AHCI_PORT_SERR_RCE BIT1
+#define EFI_AHCI_PORT_SERR_TDIE BIT8
+#define EFI_AHCI_PORT_SERR_PCDIE BIT9
+#define EFI_AHCI_PORT_SERR_PE BIT10
+#define EFI_AHCI_PORT_SERR_IE BIT11
+#define EFI_AHCI_PORT_SERR_PRC BIT16
+#define EFI_AHCI_PORT_SERR_PIE BIT17
+#define EFI_AHCI_PORT_SERR_CW BIT18
+#define EFI_AHCI_PORT_SERR_BDE BIT19
+#define EFI_AHCI_PORT_SERR_DE BIT20
+#define EFI_AHCI_PORT_SERR_CRCE BIT21
+#define EFI_AHCI_PORT_SERR_HE BIT22
+#define EFI_AHCI_PORT_SERR_LSE BIT23
+#define EFI_AHCI_PORT_SERR_TSTE BIT24
+#define EFI_AHCI_PORT_SERR_UFT BIT25
+#define EFI_AHCI_PORT_SERR_EX BIT26
+#define EFI_AHCI_PORT_ERR_CLEAR 0xFFFFFFFF
+#define EFI_AHCI_PORT_SACT 0x0034
+#define EFI_AHCI_PORT_CI 0x0038
+#define EFI_AHCI_PORT_SNTF 0x003C
+
+
+#pragma pack(1)
+//
+// Command List structure includes total 32 entries.
+// The entry Data structure is listed at the following.
+//
+typedef struct {
+ UINT32 AhciCmdCfl:5; //Command FIS Length
+ UINT32 AhciCmdA:1; //ATAPI
+ UINT32 AhciCmdW:1; //Write
+ UINT32 AhciCmdP:1; //Prefetchable
+ UINT32 AhciCmdR:1; //Reset
+ UINT32 AhciCmdB:1; //BIST
+ UINT32 AhciCmdC:1; //Clear Busy upon R_OK
+ UINT32 AhciCmdRsvd:1;
+ UINT32 AhciCmdPmp:4; //Port Multiplier Port
+ UINT32 AhciCmdPrdtl:16; //Physical Region Descriptor Table Length
+ UINT32 AhciCmdPrdbc; //Physical Region Descriptor Byte Count
+ UINT32 AhciCmdCtba; //Command Table Descriptor Base Address
+ UINT32 AhciCmdCtbau; //Command Table Descriptor Base Address Upper 32-BITs
+ UINT32 AhciCmdRsvd1[4];
+} EFI_AHCI_COMMAND_LIST;
+
+//
+// This is a software constructed FIS.
+// For Data transfer operations, this is the H2D Register FIS format as
+// specified in the Serial ATA Revision 2.6 specification.
+//
+typedef struct {
+ UINT8 AhciCFisType;
+ UINT8 AhciCFisPmNum:4;
+ UINT8 AhciCFisRsvd:1;
+ UINT8 AhciCFisRsvd1:1;
+ UINT8 AhciCFisRsvd2:1;
+ UINT8 AhciCFisCmdInd:1;
+ UINT8 AhciCFisCmd;
+ UINT8 AhciCFisFeature;
+ UINT8 AhciCFisSecNum;
+ UINT8 AhciCFisClyLow;
+ UINT8 AhciCFisClyHigh;
+ UINT8 AhciCFisDevHead;
+ UINT8 AhciCFisSecNumExp;
+ UINT8 AhciCFisClyLowExp;
+ UINT8 AhciCFisClyHighExp;
+ UINT8 AhciCFisFeatureExp;
+ UINT8 AhciCFisSecCount;
+ UINT8 AhciCFisSecCountExp;
+ UINT8 AhciCFisRsvd3;
+ UINT8 AhciCFisControl;
+ UINT8 AhciCFisRsvd4[4];
+ UINT8 AhciCFisRsvd5[44];
+} EFI_AHCI_COMMAND_FIS;
+
+//
+// ACMD: ATAPI command (12 or 16 bytes)
+//
+typedef struct {
+ UINT8 AtapiCmd[0x10];
+} EFI_AHCI_ATAPI_COMMAND;
+
+//
+// Physical Region Descriptor Table includes up to 65535 entries
+// The entry Data structure is listed at the following.
+// the actual entry number comes from the PRDTL field in the command
+// list entry for this command slot.
+//
+typedef struct {
+ UINT32 AhciPrdtDba; //Data Base Address
+ UINT32 AhciPrdtDbau; //Data Base Address Upper 32-BITs
+ UINT32 AhciPrdtRsvd;
+ UINT32 AhciPrdtDbc:22; //Data Byte Count
+ UINT32 AhciPrdtRsvd1:9;
+ UINT32 AhciPrdtIoc:1; //Interrupt on Completion
+} EFI_AHCI_COMMAND_PRDT;
+
+//
+// Command table Data strucute which is pointed to by the entry in the command list
+//
+typedef struct {
+ EFI_AHCI_COMMAND_FIS CommandFis; // A software constructed FIS.
+ EFI_AHCI_ATAPI_COMMAND AtapiCmd; // 12 or 16 bytes ATAPI cmd.
+ UINT8 Reserved[0x30];
+ EFI_AHCI_COMMAND_PRDT PrdtTable; // The scatter/gather list for Data transfer
+} EFI_AHCI_COMMAND_TABLE;
+
+//
+// Received FIS structure
+//
+typedef struct {
+ UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00
+ UINT8 AhciDmaSetupFisRsvd[0x04];
+ UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20
+ UINT8 AhciPioSetupFisRsvd[0x0C];
+ UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40
+ UINT8 AhciD2HRegisterFisRsvd[0x04];
+ UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58
+ UINT8 AhciUnknownFis[0x40]; // Unkonwn Fis: offset 0x60
+ UINT8 AhciUnknownFisRsvd[0x60];
+} EFI_AHCI_RECEIVED_FIS;
+
+#pragma pack()
+
+typedef struct {
+ EFI_AHCI_RECEIVED_FIS *AhciRFis;
+ VOID *AhciRFisMapping;
+ EFI_AHCI_COMMAND_LIST *AhciCmdList;
+ VOID *AhciCmdListMapping;
+ EFI_AHCI_COMMAND_TABLE *AhciCommandTable;
+ VOID *AhciCommandTableMapping;
+} EFI_AHCI_REGISTERS;
+
+typedef struct {
+ VOID *Buffer;
+ VOID *BufferMapping;
+ EFI_AHCI_REGISTERS AhciRegisters;
+ UINT32 AhciBar;
+} AHCI_CONTEXT;
+
+/**
+ Send Buffer cmd to specific device.
+
+ @param AhciContext The pointer to the AHCI_CONTEXT.
+ @param Port The number of port.
+ @param PortMultiplier The timeout Value of stop.
+ @param Buffer The Data Buffer to store IDENTIFY PACKET Data.
+
+ @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for executing.
+ @retval EFI_SUCCESS The cmd executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciIdentify (
+ IN AHCI_CONTEXT *AhciContext,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN OUT ATA_IDENTIFY_DATA *Buffer
+ );
+
+/**
+ Allocate transfer-related data struct which is used at AHCI mode.
+
+ @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
+
+ @retval EFI_OUT_OF_RESOURCE No enough resource.
+ @retval EFI_SUCCESS Successful to allocate resource.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciAllocateResource (
+ IN OUT AHCI_CONTEXT *AhciContext
+ );
+
+/**
+ Free allocated transfer-related data struct which is used at AHCI mode.
+
+ @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
+
+**/
+VOID
+EFIAPI
+AhciFreeResource (
+ IN OUT AHCI_CONTEXT *AhciContext
+ );
+
+/**
+ Initialize ATA host controller at AHCI mode.
+
+ The function is designed to initialize ATA host controller.
+
+ @param[in] AhciContext The pointer to the AHCI_CONTEXT.
+ @param[in] Port The port number to do initialization.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciModeInitialize (
+ IN AHCI_CONTEXT *AhciContext,
+ IN UINT8 Port
+ );
+
+typedef struct _EFI_ATA_COMMAND_BLOCK {
+ UINT8 Reserved1[2];
+ UINT8 AtaCommand;
+ UINT8 AtaFeatures;
+ UINT8 AtaSectorNumber;
+ UINT8 AtaCylinderLow;
+ UINT8 AtaCylinderHigh;
+ UINT8 AtaDeviceHead;
+ UINT8 AtaSectorNumberExp;
+ UINT8 AtaCylinderLowExp;
+ UINT8 AtaCylinderHighExp;
+ UINT8 AtaFeaturesExp;
+ UINT8 AtaSectorCount;
+ UINT8 AtaSectorCountExp;
+ UINT8 Reserved2[6];
+} EFI_ATA_COMMAND_BLOCK;
+
+typedef struct _EFI_ATA_STATUS_BLOCK {
+ UINT8 Reserved1[2];
+ UINT8 AtaStatus;
+ UINT8 AtaError;
+ UINT8 AtaSectorNumber;
+ UINT8 AtaCylinderLow;
+ UINT8 AtaCylinderHigh;
+ UINT8 AtaDeviceHead;
+ UINT8 AtaSectorNumberExp;
+ UINT8 AtaCylinderLowExp;
+ UINT8 AtaCylinderHighExp;
+ UINT8 Reserved2;
+ UINT8 AtaSectorCount;
+ UINT8 AtaSectorCountExp;
+ UINT8 Reserved3[6];
+} EFI_ATA_STATUS_BLOCK;
+
+/**
+ Start a PIO Data transfer on specific port.
+
+ @param AhciContext The pointer to the AHCI_CONTEXT.
+ @param Port The number of port.
+ @param PortMultiplier The timeout Value of stop.
+ @param AtapiCommand The atapi command will be used for the transfer.
+ @param AtapiCommandLength The Length of the atapi command.
+ @param Read The transfer direction.
+ @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
+ @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
+ @param MemoryAddr The pointer to the Data Buffer.
+ @param DataCount The Data count to be transferred.
+ @param Timeout The timeout Value of non Data transfer.
+
+ @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error occurs.
+ @retval EFI_TIMEOUT The operation is time out.
+ @retval EFI_UNSUPPORTED The device is not ready for transfer.
+ @retval EFI_SUCCESS The PIO Data transfer executes successfully.
+
+**/
+EFI_STATUS
+EFIAPI
+AhciPioTransfer (
+ IN AHCI_CONTEXT *AhciContext,
+ IN UINT8 Port,
+ IN UINT8 PortMultiplier,
+ IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
+ IN UINT8 AtapiCommandLength,
+ IN BOOLEAN Read,
+ IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
+ IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
+ IN OUT VOID *MemoryAddr,
+ IN UINT32 DataCount,
+ IN UINT64 Timeout
+ );
+
+
+#endif
+
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
new file mode 100644
index 000000000000..62a71d9f440f
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
@@ -0,0 +1,3003 @@
+/** @file
+ Entrypoint of Opal UEFI Driver and contains all the logic to
+ register for new Opal device instances.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+// This UEFI driver consumes EFI_STORAGE_SECURITY_PROTOCOL instances and installs an
+// HII GUI to manage Opal features if the device is Opal capable
+// If the Opal device is being managed by the UEFI Driver, it shall provide a popup
+// window during boot requesting a user password
+
+#include "OpalDriver.h"
+#include "OpalHii.h"
+
+EFI_GUID mOpalDeviceAtaGuid = OPAL_DEVICE_ATA_GUID;
+EFI_GUID mOpalDeviceNvmeGuid = OPAL_DEVICE_NVME_GUID;
+
+BOOLEAN mOpalEndOfDxe = FALSE;
+OPAL_REQUEST_VARIABLE *mOpalRequestVariable = NULL;
+UINTN mOpalRequestVariableSize = 0;
+CHAR16 mPopUpString[256];
+
+typedef struct {
+ UINT32 Address;
+ S3_BOOT_SCRIPT_LIB_WIDTH Width;
+} OPAL_HC_PCI_REGISTER_SAVE;
+
+//
+// To unlock the Intel SATA controller at S3 Resume, restored the following registers.
+//
+const OPAL_HC_PCI_REGISTER_SAVE mSataHcRegisterSaveTemplate[] = {
+ {0x9, S3BootScriptWidthUint8},
+ {0x10, S3BootScriptWidthUint32},
+ {0x14, S3BootScriptWidthUint32},
+ {0x18, S3BootScriptWidthUint32},
+ {0x1C, S3BootScriptWidthUint32},
+ {0x20, S3BootScriptWidthUint32},
+ {0x24, S3BootScriptWidthUint32},
+ {0x3c, S3BootScriptWidthUint8},
+ {0x3d, S3BootScriptWidthUint8},
+ {0x40, S3BootScriptWidthUint16},
+ {0x42, S3BootScriptWidthUint16},
+ {0x92, S3BootScriptWidthUint16},
+ {0x94, S3BootScriptWidthUint32},
+ {0x9C, S3BootScriptWidthUint32},
+ {0x4, S3BootScriptWidthUint16},
+};
+
+OPAL_DRIVER mOpalDriver;
+
+//
+// Globals
+//
+EFI_DRIVER_BINDING_PROTOCOL gOpalDriverBinding = {
+ OpalEfiDriverBindingSupported,
+ OpalEfiDriverBindingStart,
+ OpalEfiDriverBindingStop,
+ 0x1b,
+ NULL,
+ NULL
+};
+
+/**
+
+ The function determines the available actions for the OPAL_DISK provided.
+
+ @param[in] SupportedAttributes The supported attributes for the device.
+ @param[in] LockingFeature The locking status for the device.
+ @param[in] OwnerShip The ownership for the device.
+ @param[out] AvalDiskActions Pointer to fill-out with appropriate disk actions.
+
+**/
+TCG_RESULT
+EFIAPI
+OpalSupportGetAvailableActions(
+ IN OPAL_DISK_SUPPORT_ATTRIBUTE *SupportedAttributes,
+ IN TCG_LOCKING_FEATURE_DESCRIPTOR *LockingFeature,
+ IN UINT16 OwnerShip,
+ OUT OPAL_DISK_ACTIONS *AvalDiskActions
+ )
+{
+ BOOLEAN ExistingPassword;
+
+ NULL_CHECK(AvalDiskActions);
+
+ AvalDiskActions->AdminPass = 1;
+ AvalDiskActions->UserPass = 0;
+ AvalDiskActions->DisableUser = 0;
+ AvalDiskActions->Unlock = 0;
+
+ //
+ // Revert is performed on locking sp, so only allow if locking sp is enabled
+ //
+ if (LockingFeature->LockingEnabled) {
+ AvalDiskActions->Revert = 1;
+ }
+
+ //
+ // Psid revert is available for any device with media encryption support
+ // Revert is allowed for any device with media encryption support, however it requires
+ //
+ if (SupportedAttributes->MediaEncryption) {
+
+ //
+ // Only allow psid revert if media encryption is enabled.
+ // Otherwise, someone who steals a disk can psid revert the disk and the user Data is still
+ // intact and accessible
+ //
+ AvalDiskActions->PsidRevert = 1;
+ AvalDiskActions->RevertKeepDataForced = 0;
+
+ //
+ // Secure erase is performed by generating a new encryption key
+ // this is only available if encryption is supported
+ //
+ AvalDiskActions->SecureErase = 1;
+ } else {
+ AvalDiskActions->PsidRevert = 0;
+ AvalDiskActions->SecureErase = 0;
+
+ //
+ // If no media encryption is supported, then a revert (using password) will not
+ // erase the Data (since you can't generate a new encryption key)
+ //
+ AvalDiskActions->RevertKeepDataForced = 1;
+ }
+
+ if (LockingFeature->Locked) {
+ AvalDiskActions->Unlock = 1;
+ } else {
+ AvalDiskActions->Unlock = 0;
+ }
+
+ //
+ // Only allow user to set password if an admin password exists
+ //
+ ExistingPassword = OpalUtilAdminPasswordExists(OwnerShip, LockingFeature);
+ AvalDiskActions->UserPass = ExistingPassword;
+
+ //
+ // This will still show up even if there isn't a user, which is fine
+ //
+ AvalDiskActions->DisableUser = ExistingPassword;
+
+ return TcgResultSuccess;
+}
+
+/**
+ Enable Opal Feature for the input device.
+
+ @param[in] Session The opal session for the opal device.
+ @param[in] Msid Msid
+ @param[in] MsidLength Msid Length
+ @param[in] Password Admin password
+ @param[in] PassLength Length of password in bytes
+
+**/
+TCG_RESULT
+EFIAPI
+OpalSupportEnableOpalFeature (
+ IN OPAL_SESSION *Session,
+ IN VOID *Msid,
+ IN UINT32 MsidLength,
+ IN VOID *Password,
+ IN UINT32 PassLength
+ )
+{
+ TCG_RESULT Ret;
+
+ NULL_CHECK(Session);
+ NULL_CHECK(Msid);
+ NULL_CHECK(Password);
+
+ Ret = OpalUtilSetAdminPasswordAsSid(
+ Session,
+ Msid,
+ MsidLength,
+ Password,
+ PassLength
+ );
+ if (Ret == TcgResultSuccess) {
+ //
+ // Enable global locking range
+ //
+ Ret = OpalUtilSetOpalLockingRange(
+ Session,
+ Password,
+ PassLength,
+ OPAL_LOCKING_SP_LOCKING_GLOBALRANGE,
+ 0,
+ 0,
+ TRUE,
+ TRUE,
+ FALSE,
+ FALSE
+ );
+ }
+
+ return Ret;
+}
+
+/**
+ Update password for the Opal disk.
+
+ @param[in, out] OpalDisk The disk to update password.
+ @param[in] Password The input password.
+ @param[in] PasswordLength The input password length.
+
+**/
+VOID
+OpalSupportUpdatePassword (
+ IN OUT OPAL_DISK *OpalDisk,
+ IN VOID *Password,
+ IN UINT32 PasswordLength
+ )
+{
+ CopyMem (OpalDisk->Password, Password, PasswordLength);
+ OpalDisk->PasswordLength = (UINT8) PasswordLength;
+}
+
+/**
+ Extract device info from the device path.
+
+ @param[in] DevicePath Device path info for the device.
+ @param[out] DevInfoLength Device information length needed.
+ @param[out] DevInfo Device information extracted.
+
+ @return Device type.
+
+**/
+UINT8
+ExtractDeviceInfoFromDevicePath (
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT16 *DevInfoLength,
+ OUT OPAL_DEVICE_COMMON *DevInfo OPTIONAL
+ )
+{
+ EFI_DEVICE_PATH_PROTOCOL *TmpDevPath;
+ EFI_DEVICE_PATH_PROTOCOL *TmpDevPath2;
+ PCI_DEVICE_PATH *PciDevPath;
+ UINT8 DeviceType;
+ UINT8 BusNum;
+ OPAL_PCI_DEVICE *PciDevice;
+ OPAL_DEVICE_ATA *DevInfoAta;
+ OPAL_DEVICE_NVME *DevInfoNvme;
+ SATA_DEVICE_PATH *SataDevPath;
+ NVME_NAMESPACE_DEVICE_PATH *NvmeDevPath;
+
+ ASSERT (DevicePath != NULL);
+ ASSERT (DevInfoLength != NULL);
+
+ DeviceType = OPAL_DEVICE_TYPE_UNKNOWN;
+ *DevInfoLength = 0;
+
+ TmpDevPath = DevicePath;
+
+ //
+ // Get device type.
+ //
+ while (!IsDevicePathEnd (TmpDevPath)) {
+ if (TmpDevPath->Type == MESSAGING_DEVICE_PATH && TmpDevPath->SubType == MSG_SATA_DP) {
+ //
+ // SATA
+ //
+ if (DevInfo != NULL) {
+ SataDevPath = (SATA_DEVICE_PATH *) TmpDevPath;
+ DevInfoAta = (OPAL_DEVICE_ATA *) DevInfo;
+ DevInfoAta->Port = SataDevPath->HBAPortNumber;
+ DevInfoAta->PortMultiplierPort = SataDevPath->PortMultiplierPortNumber;
+ }
+ DeviceType = OPAL_DEVICE_TYPE_ATA;
+ *DevInfoLength = sizeof (OPAL_DEVICE_ATA);
+ break;
+ } else if (TmpDevPath->Type == MESSAGING_DEVICE_PATH && TmpDevPath->SubType == MSG_NVME_NAMESPACE_DP) {
+ //
+ // NVMe
+ //
+ if (DevInfo != NULL) {
+ NvmeDevPath = (NVME_NAMESPACE_DEVICE_PATH *) TmpDevPath;
+ DevInfoNvme = (OPAL_DEVICE_NVME *) DevInfo;
+ DevInfoNvme->NvmeNamespaceId = NvmeDevPath->NamespaceId;
+ }
+ DeviceType = OPAL_DEVICE_TYPE_NVME;
+ *DevInfoLength = sizeof (OPAL_DEVICE_NVME);
+ break;
+ }
+ TmpDevPath = NextDevicePathNode (TmpDevPath);
+ }
+
+ //
+ // Get device info.
+ //
+ BusNum = 0;
+ TmpDevPath = DevicePath;
+ TmpDevPath2 = NextDevicePathNode (DevicePath);
+ while (!IsDevicePathEnd (TmpDevPath2)) {
+ if (TmpDevPath->Type == HARDWARE_DEVICE_PATH && TmpDevPath->SubType == HW_PCI_DP) {
+ PciDevPath = (PCI_DEVICE_PATH *) TmpDevPath;
+ if ((TmpDevPath2->Type == MESSAGING_DEVICE_PATH && TmpDevPath2->SubType == MSG_NVME_NAMESPACE_DP)||
+ (TmpDevPath2->Type == MESSAGING_DEVICE_PATH && TmpDevPath2->SubType == MSG_SATA_DP)) {
+ if (DevInfo != NULL) {
+ PciDevice = &DevInfo->Device;
+ PciDevice->Segment = 0;
+ PciDevice->Bus = BusNum;
+ PciDevice->Device = PciDevPath->Device;
+ PciDevice->Function = PciDevPath->Function;
+ }
+ } else {
+ if (DevInfo != NULL) {
+ PciDevice = (OPAL_PCI_DEVICE *) ((UINTN) DevInfo + *DevInfoLength);
+ PciDevice->Segment = 0;
+ PciDevice->Bus = BusNum;
+ PciDevice->Device = PciDevPath->Device;
+ PciDevice->Function = PciDevPath->Function;
+ }
+ *DevInfoLength += sizeof (OPAL_PCI_DEVICE);
+ if (TmpDevPath2->Type == HARDWARE_DEVICE_PATH && TmpDevPath2->SubType == HW_PCI_DP) {
+ BusNum = PciRead8 (PCI_LIB_ADDRESS (BusNum, PciDevPath->Device, PciDevPath->Function, PCI_BRIDGE_SECONDARY_BUS_REGISTER_OFFSET));
+ }
+ }
+ }
+
+ TmpDevPath = NextDevicePathNode (TmpDevPath);
+ TmpDevPath2 = NextDevicePathNode (TmpDevPath2);
+ }
+
+ ASSERT (DeviceType != OPAL_DEVICE_TYPE_UNKNOWN);
+ return DeviceType;
+}
+
+/**
+ Save boot script for ATA OPAL device.
+
+ @param[in] DevInfo Pointer to ATA Opal device information.
+
+ **/
+VOID
+OpalDeviceAtaSaveBootScript (
+ IN OPAL_DEVICE_ATA *DevInfo
+ )
+{
+ UINTN Bus;
+ UINTN Device;
+ UINTN Function;
+ UINTN Index;
+ EFI_STATUS Status;
+ UINTN Offset;
+ UINT64 Address;
+ S3_BOOT_SCRIPT_LIB_WIDTH Width;
+ UINT32 Data;
+ OPAL_HC_PCI_REGISTER_SAVE *HcRegisterSaveListPtr;
+ UINTN Count;
+
+ Data = 0;
+
+ Bus = DevInfo->Device.Bus;
+ Device = DevInfo->Device.Device;
+ Function = DevInfo->Device.Function;
+
+ HcRegisterSaveListPtr = (OPAL_HC_PCI_REGISTER_SAVE *) mSataHcRegisterSaveTemplate;
+ Count = sizeof (mSataHcRegisterSaveTemplate) / sizeof (OPAL_HC_PCI_REGISTER_SAVE);
+
+ for (Index = 0; Index < Count; Index++) {
+ Offset = HcRegisterSaveListPtr[Index].Address;
+ Width = HcRegisterSaveListPtr[Index].Width;
+
+ switch (Width) {
+ case S3BootScriptWidthUint8:
+ Data = (UINT32)PciRead8 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
+ break;
+ case S3BootScriptWidthUint16:
+ Data = (UINT32)PciRead16 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
+ break;
+ case S3BootScriptWidthUint32:
+ Data = PciRead32 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
+ break;
+ default:
+ ASSERT (FALSE);
+ break;
+ }
+
+ Address = S3_BOOT_SCRIPT_LIB_PCI_ADDRESS (Bus, Device, Function, Offset);
+ Status = S3BootScriptSavePciCfgWrite (Width, Address, 1, &Data);
+ ASSERT_EFI_ERROR (Status);
+ }
+}
+
+/**
+ Build ATA OPAL device info and save them to LockBox.
+
+ @param[in] BarAddr Bar address allocated.
+
+ **/
+VOID
+BuildOpalDeviceInfoAta (
+ IN UINT32 BarAddr
+ )
+{
+ EFI_STATUS Status;
+ UINT8 DeviceType;
+ OPAL_DEVICE_ATA *DevInfoAta;
+ OPAL_DEVICE_ATA *TempDevInfoAta;
+ UINTN DevInfoLengthAta;
+ UINT16 DevInfoLength;
+ OPAL_DRIVER_DEVICE *TmpDev;
+
+ //
+ // Build ATA OPAL device info and save them to LockBox.
+ //
+ DevInfoLengthAta = 0;
+ TmpDev = mOpalDriver.DeviceList;
+ while (TmpDev != NULL) {
+ DeviceType = ExtractDeviceInfoFromDevicePath (
+ TmpDev->OpalDisk.OpalDevicePath,
+ &DevInfoLength,
+ NULL
+ );
+ if (DeviceType == OPAL_DEVICE_TYPE_ATA) {
+ DevInfoLengthAta += DevInfoLength;
+ }
+
+ TmpDev = TmpDev->Next;
+ }
+
+ if (DevInfoLengthAta == 0) {
+ return;
+ }
+
+ DevInfoAta = AllocateZeroPool (DevInfoLengthAta);
+ ASSERT (DevInfoAta != NULL);
+
+ TempDevInfoAta = DevInfoAta;
+ TmpDev = mOpalDriver.DeviceList;
+ while (TmpDev != NULL) {
+ DeviceType = ExtractDeviceInfoFromDevicePath (
+ TmpDev->OpalDisk.OpalDevicePath,
+ &DevInfoLength,
+ NULL
+ );
+ if (DeviceType == OPAL_DEVICE_TYPE_ATA) {
+ ExtractDeviceInfoFromDevicePath (
+ TmpDev->OpalDisk.OpalDevicePath,
+ &DevInfoLength,
+ (OPAL_DEVICE_COMMON *) TempDevInfoAta
+ );
+ TempDevInfoAta->Length = DevInfoLength;
+ TempDevInfoAta->OpalBaseComId = TmpDev->OpalDisk.OpalBaseComId;
+ TempDevInfoAta->BarAddr = BarAddr;
+ CopyMem (
+ TempDevInfoAta->Password,
+ TmpDev->OpalDisk.Password,
+ TmpDev->OpalDisk.PasswordLength
+ );
+ TempDevInfoAta->PasswordLength = TmpDev->OpalDisk.PasswordLength;
+ OpalDeviceAtaSaveBootScript (TempDevInfoAta);
+ TempDevInfoAta = (OPAL_DEVICE_ATA *) ((UINTN) TempDevInfoAta + DevInfoLength);
+ }
+
+ TmpDev = TmpDev->Next;
+ }
+
+ Status = SaveLockBox (
+ &mOpalDeviceAtaGuid,
+ DevInfoAta,
+ DevInfoLengthAta
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = SetLockBoxAttributes (
+ &mOpalDeviceAtaGuid,
+ LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ ZeroMem (DevInfoAta, DevInfoLengthAta);
+ FreePool (DevInfoAta);
+}
+
+/**
+ Build NVMe OPAL device info and save them to LockBox.
+
+ @param[in] BarAddr Bar address allocated.
+
+ **/
+VOID
+BuildOpalDeviceInfoNvme (
+ IN UINT32 BarAddr
+ )
+{
+ EFI_STATUS Status;
+ UINT8 DeviceType;
+ OPAL_DEVICE_NVME *DevInfoNvme;
+ OPAL_DEVICE_NVME *TempDevInfoNvme;
+ UINTN DevInfoLengthNvme;
+ UINT16 DevInfoLength;
+ OPAL_DRIVER_DEVICE *TmpDev;
+
+ //
+ // Build NVMe OPAL device info and save them to LockBox.
+ //
+ DevInfoLengthNvme = 0;
+ TmpDev = mOpalDriver.DeviceList;
+ while (TmpDev != NULL) {
+ DeviceType = ExtractDeviceInfoFromDevicePath (
+ TmpDev->OpalDisk.OpalDevicePath,
+ &DevInfoLength,
+ NULL
+ );
+ if (DeviceType == OPAL_DEVICE_TYPE_NVME) {
+ DevInfoLengthNvme += DevInfoLength;
+ }
+
+ TmpDev = TmpDev->Next;
+ }
+
+ if (DevInfoLengthNvme == 0) {
+ return;
+ }
+
+ DevInfoNvme = AllocateZeroPool (DevInfoLengthNvme);
+ ASSERT (DevInfoNvme != NULL);
+
+ TempDevInfoNvme = DevInfoNvme;
+ TmpDev = mOpalDriver.DeviceList;
+ while (TmpDev != NULL) {
+ DeviceType = ExtractDeviceInfoFromDevicePath (
+ TmpDev->OpalDisk.OpalDevicePath,
+ &DevInfoLength,
+ NULL
+ );
+ if (DeviceType == OPAL_DEVICE_TYPE_NVME) {
+ ExtractDeviceInfoFromDevicePath (
+ TmpDev->OpalDisk.OpalDevicePath,
+ &DevInfoLength,
+ (OPAL_DEVICE_COMMON *) TempDevInfoNvme
+ );
+ TempDevInfoNvme->Length = DevInfoLength;
+ TempDevInfoNvme->OpalBaseComId = TmpDev->OpalDisk.OpalBaseComId;
+ TempDevInfoNvme->BarAddr = BarAddr;
+ CopyMem (
+ TempDevInfoNvme->Password,
+ TmpDev->OpalDisk.Password,
+ TmpDev->OpalDisk.PasswordLength
+ );
+ TempDevInfoNvme->PasswordLength = TmpDev->OpalDisk.PasswordLength;
+ TempDevInfoNvme = (OPAL_DEVICE_NVME *) ((UINTN) TempDevInfoNvme + DevInfoLength);
+ }
+
+ TmpDev = TmpDev->Next;
+ }
+
+ Status = SaveLockBox (
+ &mOpalDeviceNvmeGuid,
+ DevInfoNvme,
+ DevInfoLengthNvme
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ Status = SetLockBoxAttributes (
+ &mOpalDeviceNvmeGuid,
+ LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ ZeroMem (DevInfoNvme, DevInfoLengthNvme);
+ FreePool (DevInfoNvme);
+}
+
+/**
+ Notification function of EFI_END_OF_DXE_EVENT_GROUP_GUID event group.
+
+ This is a notification function registered on EFI_END_OF_DXE_EVENT_GROUP_GUID event group.
+
+ @param Event Event whose notification function is being invoked.
+ @param Context Pointer to the notification function's context.
+
+**/
+VOID
+EFIAPI
+OpalEndOfDxeEventNotify (
+ EFI_EVENT Event,
+ VOID *Context
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS Address;
+ UINT64 Length;
+ OPAL_DRIVER_DEVICE *TmpDev;
+
+ DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
+
+ mOpalEndOfDxe = TRUE;
+
+ if (mOpalRequestVariable != NULL) {
+ //
+ // Free the OPAL request variable buffer here
+ // as the OPAL requests should have been processed.
+ //
+ FreePool (mOpalRequestVariable);
+ mOpalRequestVariable = NULL;
+ mOpalRequestVariableSize = 0;
+ }
+
+ //
+ // Assume 64K size and alignment are enough.
+ //
+ Length = 0x10000;
+ Address = 0xFFFFFFFF;
+ Status = gDS->AllocateMemorySpace (
+ EfiGcdAllocateMaxAddressSearchBottomUp,
+ EfiGcdMemoryTypeMemoryMappedIo,
+ 16, // 2^16: 64K Alignment
+ Length,
+ &Address,
+ gImageHandle,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ BuildOpalDeviceInfoAta ((UINT32) Address);
+ BuildOpalDeviceInfoNvme ((UINT32) Address);
+
+ //
+ // Zero passsword.
+ //
+ TmpDev = mOpalDriver.DeviceList;
+ while (TmpDev != NULL) {
+ ZeroMem (TmpDev->OpalDisk.Password, TmpDev->OpalDisk.PasswordLength);
+ TmpDev = TmpDev->Next;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
+
+ gBS->CloseEvent (Event);
+}
+
+/**
+ Get Psid input from the popup window.
+
+ @param[in] Dev The device which need Psid to process Psid Revert
+ OPAL request.
+ @param[in] PopUpString Pop up string.
+ @param[out] PressEsc Whether user escape function through Press ESC.
+
+ @retval Password string if success. NULL if failed.
+
+**/
+CHAR8 *
+OpalDriverPopUpPsidInput (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *PopUpString,
+ OUT BOOLEAN *PressEsc
+ )
+{
+ EFI_INPUT_KEY InputKey;
+ UINTN InputLength;
+ CHAR16 Mask[PSID_CHARACTER_LENGTH + 1];
+ CHAR16 Unicode[PSID_CHARACTER_LENGTH + 1];
+ CHAR8 *Ascii;
+
+ ZeroMem(Unicode, sizeof(Unicode));
+ ZeroMem(Mask, sizeof(Mask));
+
+ *PressEsc = FALSE;
+
+ gST->ConOut->ClearScreen(gST->ConOut);
+
+ InputLength = 0;
+ while (TRUE) {
+ Mask[InputLength] = L'_';
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &InputKey,
+ PopUpString,
+ L"---------------------",
+ Mask,
+ NULL
+ );
+
+ //
+ // Check key.
+ //
+ if (InputKey.ScanCode == SCAN_NULL) {
+ //
+ // password finished
+ //
+ if (InputKey.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ //
+ // Add the null terminator.
+ //
+ Unicode[InputLength] = 0;
+ Mask[InputLength] = 0;
+ break;
+ } else if ((InputKey.UnicodeChar == CHAR_NULL) ||
+ (InputKey.UnicodeChar == CHAR_TAB) ||
+ (InputKey.UnicodeChar == CHAR_LINEFEED)
+ ) {
+ continue;
+ } else {
+ //
+ // delete last key entered
+ //
+ if (InputKey.UnicodeChar == CHAR_BACKSPACE) {
+ if (InputLength > 0) {
+ Unicode[InputLength] = 0;
+ Mask[InputLength] = 0;
+ InputLength--;
+ }
+ } else {
+ //
+ // add Next key entry
+ //
+ Unicode[InputLength] = InputKey.UnicodeChar;
+ Mask[InputLength] = InputKey.UnicodeChar;
+ InputLength++;
+ if (InputLength == PSID_CHARACTER_LENGTH) {
+ //
+ // Add the null terminator.
+ //
+ Unicode[InputLength] = 0;
+ Mask[InputLength] = 0;
+ break;
+ }
+ }
+ }
+ }
+
+ //
+ // exit on ESC
+ //
+ if (InputKey.ScanCode == SCAN_ESC) {
+ *PressEsc = TRUE;
+ break;
+ }
+ }
+
+ gST->ConOut->ClearScreen(gST->ConOut);
+
+ if (InputLength == 0 || InputKey.ScanCode == SCAN_ESC) {
+ return NULL;
+ }
+
+ Ascii = AllocateZeroPool (PSID_CHARACTER_LENGTH + 1);
+ if (Ascii == NULL) {
+ ZeroMem (Unicode, sizeof (Unicode));
+ ZeroMem (Mask, sizeof (Mask));
+ return NULL;
+ }
+
+ UnicodeStrToAsciiStrS (Unicode, Ascii, PSID_CHARACTER_LENGTH + 1);
+ ZeroMem (Unicode, sizeof (Unicode));
+ ZeroMem (Mask, sizeof (Mask));
+
+ return Ascii;
+}
+
+
+/**
+ Get password input from the popup window.
+
+ @param[in] Dev The device which need password to unlock or
+ process OPAL request.
+ @param[in] PopUpString1 Pop up string 1.
+ @param[in] PopUpString2 Pop up string 2.
+ @param[out] PressEsc Whether user escape function through Press ESC.
+
+ @retval Password string if success. NULL if failed.
+
+**/
+CHAR8 *
+OpalDriverPopUpPasswordInput (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *PopUpString1,
+ IN CHAR16 *PopUpString2,
+ OUT BOOLEAN *PressEsc
+ )
+{
+ EFI_INPUT_KEY InputKey;
+ UINTN InputLength;
+ CHAR16 Mask[MAX_PASSWORD_SIZE + 1];
+ CHAR16 Unicode[MAX_PASSWORD_SIZE + 1];
+ CHAR8 *Ascii;
+
+ ZeroMem(Unicode, sizeof(Unicode));
+ ZeroMem(Mask, sizeof(Mask));
+
+ *PressEsc = FALSE;
+
+ gST->ConOut->ClearScreen(gST->ConOut);
+
+ InputLength = 0;
+ while (TRUE) {
+ Mask[InputLength] = L'_';
+ if (PopUpString2 == NULL) {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &InputKey,
+ PopUpString1,
+ L"---------------------",
+ Mask,
+ NULL
+ );
+ } else {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &InputKey,
+ PopUpString1,
+ PopUpString2,
+ L"---------------------",
+ Mask,
+ NULL
+ );
+ }
+
+ //
+ // Check key.
+ //
+ if (InputKey.ScanCode == SCAN_NULL) {
+ //
+ // password finished
+ //
+ if (InputKey.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ //
+ // Add the null terminator.
+ //
+ Unicode[InputLength] = 0;
+ Mask[InputLength] = 0;
+ break;
+ } else if ((InputKey.UnicodeChar == CHAR_NULL) ||
+ (InputKey.UnicodeChar == CHAR_TAB) ||
+ (InputKey.UnicodeChar == CHAR_LINEFEED)
+ ) {
+ continue;
+ } else {
+ //
+ // delete last key entered
+ //
+ if (InputKey.UnicodeChar == CHAR_BACKSPACE) {
+ if (InputLength > 0) {
+ Unicode[InputLength] = 0;
+ Mask[InputLength] = 0;
+ InputLength--;
+ }
+ } else {
+ //
+ // add Next key entry
+ //
+ Unicode[InputLength] = InputKey.UnicodeChar;
+ Mask[InputLength] = L'*';
+ InputLength++;
+ if (InputLength == MAX_PASSWORD_SIZE) {
+ //
+ // Add the null terminator.
+ //
+ Unicode[InputLength] = 0;
+ Mask[InputLength] = 0;
+ break;
+ }
+ }
+ }
+ }
+
+ //
+ // exit on ESC
+ //
+ if (InputKey.ScanCode == SCAN_ESC) {
+ *PressEsc = TRUE;
+ break;
+ }
+ }
+
+ gST->ConOut->ClearScreen(gST->ConOut);
+
+ if (InputLength == 0 || InputKey.ScanCode == SCAN_ESC) {
+ return NULL;
+ }
+
+ Ascii = AllocateZeroPool (MAX_PASSWORD_SIZE + 1);
+ if (Ascii == NULL) {
+ ZeroMem (Unicode, sizeof (Unicode));
+ return NULL;
+ }
+
+ UnicodeStrToAsciiStrS (Unicode, Ascii, MAX_PASSWORD_SIZE + 1);
+ ZeroMem (Unicode, sizeof (Unicode));
+
+ return Ascii;
+}
+
+/**
+ Check if disk is locked, show popup window and ask for password if it is.
+
+ @param[in] Dev The device which need to be unlocked.
+ @param[in] RequestString Request string.
+
+**/
+CHAR16 *
+OpalGetPopUpString (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *RequestString
+ )
+{
+ UINTN StrLength;
+
+ StrLength = StrLen (RequestString) + 1 + MAX (StrLen (Dev->Name16), StrLen (L"Disk"));
+ ASSERT (StrLength < sizeof (mPopUpString) / sizeof (CHAR16));
+
+ if (Dev->Name16 == NULL) {
+ UnicodeSPrint (mPopUpString, StrLength + 1, L"%s Disk", RequestString);
+ } else {
+ UnicodeSPrint (mPopUpString, StrLength + 1, L"%s %s", RequestString, Dev->Name16);
+ }
+
+ return mPopUpString;
+}
+
+/**
+ Check if disk is locked, show popup window and ask for password if it is.
+
+ @param[in] Dev The device which need to be unlocked.
+ @param[in] RequestString Request string.
+
+**/
+VOID
+OpalDriverRequestPassword (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *RequestString
+ )
+{
+ UINT8 Count;
+ BOOLEAN IsEnabled;
+ BOOLEAN IsLocked;
+ CHAR8 *Password;
+ UINT32 PasswordLen;
+ OPAL_SESSION Session;
+ BOOLEAN PressEsc;
+ EFI_INPUT_KEY Key;
+ TCG_RESULT Ret;
+ CHAR16 *PopUpString;
+
+ if (Dev == NULL) {
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
+
+ PopUpString = OpalGetPopUpString (Dev, RequestString);
+
+ Count = 0;
+
+ IsEnabled = OpalFeatureEnabled (&Dev->OpalDisk.SupportedAttributes, &Dev->OpalDisk.LockingFeature);
+ if (IsEnabled) {
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+
+ IsLocked = OpalDeviceLocked (&Dev->OpalDisk.SupportedAttributes, &Dev->OpalDisk.LockingFeature);
+
+ while (Count < MAX_PASSWORD_TRY_COUNT) {
+ Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL, &PressEsc);
+ if (PressEsc) {
+ if (IsLocked) {
+ //
+ // Current device in the lock status and
+ // User not input password and press ESC,
+ // keep device in lock status and continue boot.
+ //
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Press ENTER to skip the request and continue boot,",
+ L"Press ESC to input password again",
+ NULL
+ );
+ } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
+
+ if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ gST->ConOut->ClearScreen(gST->ConOut);
+ //
+ // Keep lock and continue boot.
+ //
+ return;
+ } else {
+ //
+ // Let user input password again.
+ //
+ continue;
+ }
+ } else {
+ //
+ // Current device in the unlock status and
+ // User not input password and press ESC,
+ // Shutdown the device.
+ //
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Press ENTER to shutdown, Press ESC to input password again",
+ NULL
+ );
+ } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
+
+ if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ gRT->ResetSystem (EfiResetShutdown, EFI_SUCCESS, 0, NULL);
+ } else {
+ //
+ // Let user input password again.
+ //
+ continue;
+ }
+ }
+ }
+
+ if (Password == NULL) {
+ Count ++;
+ continue;
+ }
+ PasswordLen = (UINT32) AsciiStrLen(Password);
+
+ if (IsLocked) {
+ Ret = OpalUtilUpdateGlobalLockingRange(&Session, Password, PasswordLen, FALSE, FALSE);
+ } else {
+ Ret = OpalUtilUpdateGlobalLockingRange(&Session, Password, PasswordLen, TRUE, TRUE);
+ if (Ret == TcgResultSuccess) {
+ Ret = OpalUtilUpdateGlobalLockingRange(&Session, Password, PasswordLen, FALSE, FALSE);
+ }
+ }
+
+ if (Ret == TcgResultSuccess) {
+ OpalSupportUpdatePassword (&Dev->OpalDisk, Password, PasswordLen);
+ DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
+ } else {
+ DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
+ }
+
+ if (Password != NULL) {
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ }
+
+ if (Ret == TcgResultSuccess) {
+ break;
+ }
+
+ Count++;
+
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Invalid password.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ }
+
+ if (Count >= MAX_PASSWORD_TRY_COUNT) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Opal password retry count exceeds the limit. Must shutdown!",
+ L"Press ENTER to shutdown",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+
+ gRT->ResetSystem (EfiResetShutdown, EFI_SUCCESS, 0, NULL);
+ }
+ }
+}
+
+/**
+ Process Enable Feature OPAL request.
+
+ @param[in] Dev The device which has Enable Feature OPAL request.
+ @param[in] RequestString Request string.
+
+**/
+VOID
+ProcessOpalRequestEnableFeature (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *RequestString
+ )
+{
+ UINT8 Count;
+ CHAR8 *Password;
+ UINT32 PasswordLen;
+ CHAR8 *PasswordConfirm;
+ UINT32 PasswordLenConfirm;
+ OPAL_SESSION Session;
+ BOOLEAN PressEsc;
+ EFI_INPUT_KEY Key;
+ TCG_RESULT Ret;
+ CHAR16 *PopUpString;
+
+ if (Dev == NULL) {
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
+
+ PopUpString = OpalGetPopUpString (Dev, RequestString);
+
+ Count = 0;
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+
+ while (Count < MAX_PASSWORD_TRY_COUNT) {
+ Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please type in your new password", &PressEsc);
+ if (PressEsc) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Press ENTER to skip the request and continue boot,",
+ L"Press ESC to input password again",
+ NULL
+ );
+ } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
+
+ if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ gST->ConOut->ClearScreen(gST->ConOut);
+ return;
+ } else {
+ //
+ // Let user input password again.
+ //
+ continue;
+ }
+ }
+
+ if (Password == NULL) {
+ Count ++;
+ continue;
+ }
+ PasswordLen = (UINT32) AsciiStrLen(Password);
+
+ PasswordConfirm = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please confirm your new password", &PressEsc);
+ if (PasswordConfirm == NULL) {
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ Count ++;
+ continue;
+ }
+ PasswordLenConfirm = (UINT32) AsciiStrLen(PasswordConfirm);
+ if ((PasswordLen != PasswordLenConfirm) ||
+ (CompareMem (Password, PasswordConfirm, PasswordLen) != 0)) {
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ ZeroMem (PasswordConfirm, PasswordLenConfirm);
+ FreePool (PasswordConfirm);
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Passwords are not the same.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ Count ++;
+ continue;
+ }
+
+ if (PasswordConfirm != NULL) {
+ ZeroMem (PasswordConfirm, PasswordLenConfirm);
+ FreePool (PasswordConfirm);
+ }
+
+ Ret = OpalSupportEnableOpalFeature (&Session, Dev->OpalDisk.Msid, Dev->OpalDisk.MsidLength, Password, PasswordLen);
+ if (Ret == TcgResultSuccess) {
+ OpalSupportUpdatePassword (&Dev->OpalDisk, Password, PasswordLen);
+ DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
+ } else {
+ DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
+ }
+
+ if (Password != NULL) {
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ }
+
+ if (Ret == TcgResultSuccess) {
+ break;
+ }
+
+ Count++;
+
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Request failed.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ }
+
+ if (Count >= MAX_PASSWORD_TRY_COUNT) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Opal password retry count exceeds the limit.",
+ L"Press ENTER to skip the request and continue boot",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ gST->ConOut->ClearScreen(gST->ConOut);
+ }
+}
+
+/**
+ Process Disable User OPAL request.
+
+ @param[in] Dev The device which has Disable User OPAL request.
+ @param[in] RequestString Request string.
+
+**/
+VOID
+ProcessOpalRequestDisableUser (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *RequestString
+ )
+{
+ UINT8 Count;
+ CHAR8 *Password;
+ UINT32 PasswordLen;
+ OPAL_SESSION Session;
+ BOOLEAN PressEsc;
+ EFI_INPUT_KEY Key;
+ TCG_RESULT Ret;
+ BOOLEAN PasswordFailed;
+ CHAR16 *PopUpString;
+
+ if (Dev == NULL) {
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
+
+ PopUpString = OpalGetPopUpString (Dev, RequestString);
+
+ Count = 0;
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+
+ while (Count < MAX_PASSWORD_TRY_COUNT) {
+ Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL, &PressEsc);
+ if (PressEsc) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Press ENTER to skip the request and continue boot,",
+ L"Press ESC to input password again",
+ NULL
+ );
+ } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
+
+ if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ gST->ConOut->ClearScreen(gST->ConOut);
+ return;
+ } else {
+ //
+ // Let user input password again.
+ //
+ continue;
+ }
+ }
+
+ if (Password == NULL) {
+ Count ++;
+ continue;
+ }
+ PasswordLen = (UINT32) AsciiStrLen(Password);
+
+ Ret = OpalUtilDisableUser(&Session, Password, PasswordLen, &PasswordFailed);
+ if (Ret == TcgResultSuccess) {
+ OpalSupportUpdatePassword (&Dev->OpalDisk, Password, PasswordLen);
+ DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
+ } else {
+ DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
+ }
+
+ if (Password != NULL) {
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ }
+
+ if (Ret == TcgResultSuccess) {
+ break;
+ }
+
+ Count++;
+
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Invalid password, request failed.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ }
+
+ if (Count >= MAX_PASSWORD_TRY_COUNT) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Opal password retry count exceeds the limit.",
+ L"Press ENTER to skip the request and continue boot",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ gST->ConOut->ClearScreen(gST->ConOut);
+ }
+}
+
+/**
+ Process Psid Revert OPAL request.
+
+ @param[in] Dev The device which has Psid Revert OPAL request.
+ @param[in] RequestString Request string.
+
+**/
+VOID
+ProcessOpalRequestPsidRevert (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *RequestString
+ )
+{
+ UINT8 Count;
+ CHAR8 *Psid;
+ UINT32 PsidLen;
+ OPAL_SESSION Session;
+ BOOLEAN PressEsc;
+ EFI_INPUT_KEY Key;
+ TCG_RESULT Ret;
+ CHAR16 *PopUpString;
+
+ if (Dev == NULL) {
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
+
+ PopUpString = OpalGetPopUpString (Dev, RequestString);
+
+ Count = 0;
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+
+ while (Count < MAX_PSID_TRY_COUNT) {
+ Psid = OpalDriverPopUpPsidInput (Dev, PopUpString, &PressEsc);
+ if (PressEsc) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Press ENTER to skip the request and continue boot,",
+ L"Press ESC to input Psid again",
+ NULL
+ );
+ } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
+
+ if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ gST->ConOut->ClearScreen(gST->ConOut);
+ return;
+ } else {
+ //
+ // Let user input Psid again.
+ //
+ continue;
+ }
+ }
+
+ if (Psid == NULL) {
+ Count ++;
+ continue;
+ }
+ PsidLen = (UINT32) AsciiStrLen(Psid);
+
+ Ret = OpalUtilPsidRevert(&Session, Psid, PsidLen);
+ if (Ret == TcgResultSuccess) {
+ DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
+ } else {
+ DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
+ }
+
+ if (Psid != NULL) {
+ ZeroMem (Psid, PsidLen);
+ FreePool (Psid);
+ }
+
+ if (Ret == TcgResultSuccess) {
+ break;
+ }
+
+ Count++;
+
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Invalid Psid, request failed.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ }
+
+ if (Count >= MAX_PSID_TRY_COUNT) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Opal Psid retry count exceeds the limit.",
+ L"Press ENTER to skip the request and continue boot",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ gST->ConOut->ClearScreen(gST->ConOut);
+ }
+}
+
+/**
+ Process Admin Revert OPAL request.
+
+ @param[in] Dev The device which has Revert OPAL request.
+ @param[in] KeepUserData Whether to keep user data or not.
+ @param[in] RequestString Request string.
+
+**/
+VOID
+ProcessOpalRequestRevert (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN BOOLEAN KeepUserData,
+ IN CHAR16 *RequestString
+ )
+{
+ UINT8 Count;
+ CHAR8 *Password;
+ UINT32 PasswordLen;
+ OPAL_SESSION Session;
+ BOOLEAN PressEsc;
+ EFI_INPUT_KEY Key;
+ TCG_RESULT Ret;
+ BOOLEAN PasswordFailed;
+ CHAR16 *PopUpString;
+
+ if (Dev == NULL) {
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
+
+ PopUpString = OpalGetPopUpString (Dev, RequestString);
+
+ Count = 0;
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+
+ while (Count < MAX_PASSWORD_TRY_COUNT) {
+ Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL, &PressEsc);
+ if (PressEsc) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Press ENTER to skip the request and continue boot,",
+ L"Press ESC to input password again",
+ NULL
+ );
+ } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
+
+ if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ gST->ConOut->ClearScreen(gST->ConOut);
+ return;
+ } else {
+ //
+ // Let user input password again.
+ //
+ continue;
+ }
+ }
+
+ if (Password == NULL) {
+ Count ++;
+ continue;
+ }
+ PasswordLen = (UINT32) AsciiStrLen(Password);
+
+ if ((Dev->OpalDisk.SupportedAttributes.PyriteSsc == 1) &&
+ (Dev->OpalDisk.LockingFeature.MediaEncryption == 0)) {
+ //
+ // For pyrite type device which does not support media encryption,
+ // it does not accept "Keep User Data" parameter.
+ // So here hardcode a FALSE for this case.
+ //
+ Ret = OpalUtilRevert(
+ &Session,
+ FALSE,
+ Password,
+ PasswordLen,
+ &PasswordFailed,
+ Dev->OpalDisk.Msid,
+ Dev->OpalDisk.MsidLength
+ );
+ } else {
+ Ret = OpalUtilRevert(
+ &Session,
+ KeepUserData,
+ Password,
+ PasswordLen,
+ &PasswordFailed,
+ Dev->OpalDisk.Msid,
+ Dev->OpalDisk.MsidLength
+ );
+ }
+ if (Ret == TcgResultSuccess) {
+ OpalSupportUpdatePassword (&Dev->OpalDisk, Password, PasswordLen);
+ DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
+ } else {
+ DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
+ }
+
+ if (Password != NULL) {
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ }
+
+ if (Ret == TcgResultSuccess) {
+ break;
+ }
+
+ Count++;
+
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Invalid password, request failed.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ }
+
+ if (Count >= MAX_PASSWORD_TRY_COUNT) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Opal password retry count exceeds the limit.",
+ L"Press ENTER to skip the request and continue boot",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ gST->ConOut->ClearScreen(gST->ConOut);
+ }
+}
+
+/**
+ Process Secure Erase OPAL request.
+
+ @param[in] Dev The device which has Secure Erase OPAL request.
+ @param[in] RequestString Request string.
+
+**/
+VOID
+ProcessOpalRequestSecureErase (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *RequestString
+ )
+{
+ UINT8 Count;
+ CHAR8 *Password;
+ UINT32 PasswordLen;
+ OPAL_SESSION Session;
+ BOOLEAN PressEsc;
+ EFI_INPUT_KEY Key;
+ TCG_RESULT Ret;
+ BOOLEAN PasswordFailed;
+ CHAR16 *PopUpString;
+
+ if (Dev == NULL) {
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
+
+ PopUpString = OpalGetPopUpString (Dev, RequestString);
+
+ Count = 0;
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+
+ while (Count < MAX_PASSWORD_TRY_COUNT) {
+ Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL, &PressEsc);
+ if (PressEsc) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Press ENTER to skip the request and continue boot,",
+ L"Press ESC to input password again",
+ NULL
+ );
+ } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
+
+ if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ gST->ConOut->ClearScreen(gST->ConOut);
+ return;
+ } else {
+ //
+ // Let user input password again.
+ //
+ continue;
+ }
+ }
+
+ if (Password == NULL) {
+ Count ++;
+ continue;
+ }
+ PasswordLen = (UINT32) AsciiStrLen(Password);
+
+ Ret = OpalUtilSecureErase(&Session, Password, PasswordLen, &PasswordFailed);
+ if (Ret == TcgResultSuccess) {
+ OpalSupportUpdatePassword (&Dev->OpalDisk, Password, PasswordLen);
+ DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
+ } else {
+ DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
+ }
+
+ if (Password != NULL) {
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ }
+
+ if (Ret == TcgResultSuccess) {
+ break;
+ }
+
+ Count++;
+
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Invalid password, request failed.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ }
+
+ if (Count >= MAX_PASSWORD_TRY_COUNT) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Opal password retry count exceeds the limit.",
+ L"Press ENTER to skip the request and continue boot",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ gST->ConOut->ClearScreen(gST->ConOut);
+ }
+}
+
+/**
+ Process Set Admin Pwd OPAL request.
+
+ @param[in] Dev The device which has Set Admin Pwd Feature OPAL request.
+ @param[in] RequestString Request string.
+
+**/
+VOID
+ProcessOpalRequestSetUserPwd (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *RequestString
+ )
+{
+ UINT8 Count;
+ CHAR8 *OldPassword;
+ UINT32 OldPasswordLen;
+ CHAR8 *Password;
+ UINT32 PasswordLen;
+ CHAR8 *PasswordConfirm;
+ UINT32 PasswordLenConfirm;
+ OPAL_SESSION Session;
+ BOOLEAN PressEsc;
+ EFI_INPUT_KEY Key;
+ TCG_RESULT Ret;
+ CHAR16 *PopUpString;
+
+ if (Dev == NULL) {
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
+
+ PopUpString = OpalGetPopUpString (Dev, RequestString);
+
+ Count = 0;
+
+ while (Count < MAX_PASSWORD_TRY_COUNT) {
+ OldPassword = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please type in your password", &PressEsc);
+ if (PressEsc) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Press ENTER to skip the request and continue boot,",
+ L"Press ESC to input password again",
+ NULL
+ );
+ } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
+
+ if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ gST->ConOut->ClearScreen(gST->ConOut);
+ return;
+ } else {
+ //
+ // Let user input password again.
+ //
+ continue;
+ }
+ }
+
+ if (OldPassword == NULL) {
+ Count ++;
+ continue;
+ }
+ OldPasswordLen = (UINT32) AsciiStrLen(OldPassword);
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+ Ret = OpalUtilVerifyPassword (&Session, OldPassword, OldPasswordLen, OPAL_LOCKING_SP_USER1_AUTHORITY);
+ if (Ret == TcgResultSuccess) {
+ DEBUG ((DEBUG_INFO, "Verify with USER1 authority : Success\n"));
+ } else {
+ Ret = OpalUtilVerifyPassword (&Session, OldPassword, OldPasswordLen, OPAL_LOCKING_SP_ADMIN1_AUTHORITY);
+ if (Ret == TcgResultSuccess) {
+ DEBUG ((DEBUG_INFO, "Verify with ADMIN1 authority: Success\n"));
+ } else {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ DEBUG ((DEBUG_INFO, "Verify: Failure\n"));
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Incorrect password.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ Count ++;
+ continue;
+ }
+ }
+
+ Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please type in your new password", &PressEsc);
+ if (Password == NULL) {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ Count ++;
+ continue;
+ }
+ PasswordLen = (UINT32) AsciiStrLen(Password);
+
+ PasswordConfirm = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please confirm your new password", &PressEsc);
+ if (PasswordConfirm == NULL) {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ Count ++;
+ continue;
+ }
+ PasswordLenConfirm = (UINT32) AsciiStrLen(PasswordConfirm);
+ if ((PasswordLen != PasswordLenConfirm) ||
+ (CompareMem (Password, PasswordConfirm, PasswordLen) != 0)) {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ ZeroMem (PasswordConfirm, PasswordLenConfirm);
+ FreePool (PasswordConfirm);
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Passwords are not the same.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ Count ++;
+ continue;
+ }
+
+ if (PasswordConfirm != NULL) {
+ ZeroMem (PasswordConfirm, PasswordLenConfirm);
+ FreePool (PasswordConfirm);
+ }
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+ Ret = OpalUtilSetUserPassword(
+ &Session,
+ OldPassword,
+ OldPasswordLen,
+ Password,
+ PasswordLen
+ );
+ if (Ret == TcgResultSuccess) {
+ OpalSupportUpdatePassword (&Dev->OpalDisk, Password, PasswordLen);
+ DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
+ } else {
+ DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
+ }
+
+ if (OldPassword != NULL) {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ }
+
+ if (Password != NULL) {
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ }
+
+ if (Ret == TcgResultSuccess) {
+ break;
+ }
+
+ Count++;
+
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Request failed.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ }
+
+ if (Count >= MAX_PASSWORD_TRY_COUNT) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Opal password retry count exceeds the limit.",
+ L"Press ENTER to skip the request and continue boot",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ gST->ConOut->ClearScreen(gST->ConOut);
+ }
+}
+
+/**
+ Process Set Admin Pwd OPAL request.
+
+ @param[in] Dev The device which has Set Admin Pwd Feature OPAL request.
+ @param[in] RequestString Request string.
+
+**/
+VOID
+ProcessOpalRequestSetAdminPwd (
+ IN OPAL_DRIVER_DEVICE *Dev,
+ IN CHAR16 *RequestString
+ )
+{
+ UINT8 Count;
+ CHAR8 *OldPassword;
+ UINT32 OldPasswordLen;
+ CHAR8 *Password;
+ UINT32 PasswordLen;
+ CHAR8 *PasswordConfirm;
+ UINT32 PasswordLenConfirm;
+ OPAL_SESSION Session;
+ BOOLEAN PressEsc;
+ EFI_INPUT_KEY Key;
+ TCG_RESULT Ret;
+ CHAR16 *PopUpString;
+
+ if (Dev == NULL) {
+ return;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
+
+ PopUpString = OpalGetPopUpString (Dev, RequestString);
+
+ Count = 0;
+
+ while (Count < MAX_PASSWORD_TRY_COUNT) {
+ OldPassword = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please type in your password", &PressEsc);
+ if (PressEsc) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Press ENTER to skip the request and continue boot,",
+ L"Press ESC to input password again",
+ NULL
+ );
+ } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
+
+ if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
+ gST->ConOut->ClearScreen(gST->ConOut);
+ return;
+ } else {
+ //
+ // Let user input password again.
+ //
+ continue;
+ }
+ }
+
+ if (OldPassword == NULL) {
+ Count ++;
+ continue;
+ }
+ OldPasswordLen = (UINT32) AsciiStrLen(OldPassword);
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+ Ret = OpalUtilVerifyPassword (&Session, OldPassword, OldPasswordLen, OPAL_LOCKING_SP_ADMIN1_AUTHORITY);
+ if (Ret == TcgResultSuccess) {
+ DEBUG ((DEBUG_INFO, "Verify: Success\n"));
+ } else {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ DEBUG ((DEBUG_INFO, "Verify: Failure\n"));
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Incorrect password.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ Count ++;
+ continue;
+ }
+
+ Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please type in your new password", &PressEsc);
+ if (Password == NULL) {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ Count ++;
+ continue;
+ }
+ PasswordLen = (UINT32) AsciiStrLen(Password);
+
+ PasswordConfirm = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please confirm your new password", &PressEsc);
+ if (PasswordConfirm == NULL) {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ Count ++;
+ continue;
+ }
+ PasswordLenConfirm = (UINT32) AsciiStrLen(PasswordConfirm);
+ if ((PasswordLen != PasswordLenConfirm) ||
+ (CompareMem (Password, PasswordConfirm, PasswordLen) != 0)) {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ ZeroMem (PasswordConfirm, PasswordLenConfirm);
+ FreePool (PasswordConfirm);
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Passwords are not the same.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ Count ++;
+ continue;
+ }
+
+ if (PasswordConfirm != NULL) {
+ ZeroMem (PasswordConfirm, PasswordLenConfirm);
+ FreePool (PasswordConfirm);
+ }
+
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->OpalDisk.Sscp;
+ Session.MediaId = Dev->OpalDisk.MediaId;
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+ Ret = OpalUtilSetAdminPassword(
+ &Session,
+ OldPassword,
+ OldPasswordLen,
+ Password,
+ PasswordLen
+ );
+ if (Ret == TcgResultSuccess) {
+ OpalSupportUpdatePassword (&Dev->OpalDisk, Password, PasswordLen);
+ DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
+ } else {
+ DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
+ }
+
+ if (OldPassword != NULL) {
+ ZeroMem (OldPassword, OldPasswordLen);
+ FreePool (OldPassword);
+ }
+
+ if (Password != NULL) {
+ ZeroMem (Password, PasswordLen);
+ FreePool (Password);
+ }
+
+ if (Ret == TcgResultSuccess) {
+ break;
+ }
+
+ Count++;
+
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Request failed.",
+ L"Press ENTER to retry",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ }
+
+ if (Count >= MAX_PASSWORD_TRY_COUNT) {
+ do {
+ CreatePopUp (
+ EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
+ &Key,
+ L"Opal password retry count exceeds the limit.",
+ L"Press ENTER to skip the request and continue boot",
+ NULL
+ );
+ } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
+ gST->ConOut->ClearScreen(gST->ConOut);
+ }
+}
+
+/**
+ Process OPAL request.
+
+ @param[in] Dev The device which has OPAL request.
+
+**/
+VOID
+ProcessOpalRequest (
+ IN OPAL_DRIVER_DEVICE *Dev
+ )
+{
+ EFI_STATUS Status;
+ OPAL_REQUEST_VARIABLE *TempVariable;
+ OPAL_REQUEST_VARIABLE *Variable;
+ UINTN VariableSize;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePathInVariable;
+ UINTN DevicePathSizeInVariable;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ UINTN DevicePathSize;
+ BOOLEAN KeepUserData;
+
+ DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
+
+ if (mOpalRequestVariable == NULL) {
+ Status = GetVariable2 (
+ OPAL_REQUEST_VARIABLE_NAME,
+ &gHiiSetupVariableGuid,
+ (VOID **) &Variable,
+ &VariableSize
+ );
+ if (EFI_ERROR (Status) || (Variable == NULL)) {
+ return;
+ }
+ mOpalRequestVariable = Variable;
+ mOpalRequestVariableSize = VariableSize;
+
+ //
+ // Delete the OPAL request variable.
+ //
+ Status = gRT->SetVariable (
+ OPAL_REQUEST_VARIABLE_NAME,
+ (EFI_GUID *) &gHiiSetupVariableGuid,
+ 0,
+ 0,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+ } else {
+ Variable = mOpalRequestVariable;
+ VariableSize = mOpalRequestVariableSize;
+ }
+
+ //
+ // Process the OPAL requests.
+ //
+ TempVariable = Variable;
+ while ((VariableSize > sizeof (OPAL_REQUEST_VARIABLE)) &&
+ (VariableSize >= TempVariable->Length) &&
+ (TempVariable->Length > sizeof (OPAL_REQUEST_VARIABLE))) {
+ DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN) TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
+ DevicePathSizeInVariable = GetDevicePathSize (DevicePathInVariable);
+ DevicePath = Dev->OpalDisk.OpalDevicePath;
+ DevicePathSize = GetDevicePathSize (DevicePath);
+ if ((DevicePathSize == DevicePathSizeInVariable) &&
+ (CompareMem (DevicePath, DevicePathInVariable, DevicePathSize) == 0)) {
+ //
+ // Found the node for the OPAL device.
+ //
+ if (TempVariable->OpalRequest.SetAdminPwd != 0) {
+ ProcessOpalRequestSetAdminPwd (Dev, L"Update Admin Pwd:");
+ }
+ if (TempVariable->OpalRequest.SetUserPwd != 0) {
+ ProcessOpalRequestSetUserPwd (Dev, L"Set User Pwd:");
+ }
+ if (TempVariable->OpalRequest.SecureErase!= 0) {
+ ProcessOpalRequestSecureErase (Dev, L"Secure Erase:");
+ }
+ if (TempVariable->OpalRequest.Revert != 0) {
+ KeepUserData = (BOOLEAN) TempVariable->OpalRequest.KeepUserData;
+ ProcessOpalRequestRevert (
+ Dev,
+ KeepUserData,
+ KeepUserData ? L"Admin Revert(keep):" : L"Admin Revert:"
+ );
+ }
+ if (TempVariable->OpalRequest.PsidRevert != 0) {
+ ProcessOpalRequestPsidRevert (Dev, L"Psid Revert:");
+ }
+ if (TempVariable->OpalRequest.DisableUser != 0) {
+ ProcessOpalRequestDisableUser (Dev, L"Disable User:");
+ }
+ if (TempVariable->OpalRequest.EnableFeature != 0) {
+ ProcessOpalRequestEnableFeature (Dev, L"Enable Feature:");
+ }
+
+ break;
+ }
+
+ VariableSize -= TempVariable->Length;
+ TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) TempVariable + TempVariable->Length);
+ }
+
+ DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
+}
+
+/**
+ Add new device to the global device list.
+
+ @param Dev New create device.
+
+**/
+VOID
+AddDeviceToTail(
+ IN OPAL_DRIVER_DEVICE *Dev
+ )
+{
+ OPAL_DRIVER_DEVICE *TmpDev;
+
+ if (mOpalDriver.DeviceList == NULL) {
+ mOpalDriver.DeviceList = Dev;
+ } else {
+ TmpDev = mOpalDriver.DeviceList;
+ while (TmpDev->Next != NULL) {
+ TmpDev = TmpDev->Next;
+ }
+
+ TmpDev->Next = Dev;
+ }
+}
+
+/**
+ Remove one device in the global device list.
+
+ @param Dev The device need to be removed.
+
+**/
+VOID
+RemoveDevice (
+ IN OPAL_DRIVER_DEVICE *Dev
+ )
+{
+ OPAL_DRIVER_DEVICE *TmpDev;
+
+ if (mOpalDriver.DeviceList == NULL) {
+ return;
+ }
+
+ if (mOpalDriver.DeviceList == Dev) {
+ mOpalDriver.DeviceList = NULL;
+ return;
+ }
+
+ TmpDev = mOpalDriver.DeviceList;
+ while (TmpDev->Next != NULL) {
+ if (TmpDev->Next == Dev) {
+ TmpDev->Next = Dev->Next;
+ break;
+ }
+ }
+}
+
+/**
+ Get current device count.
+
+ @retval return the current created device count.
+
+**/
+UINT8
+GetDeviceCount (
+ VOID
+ )
+{
+ UINT8 Count;
+ OPAL_DRIVER_DEVICE *TmpDev;
+
+ Count = 0;
+ TmpDev = mOpalDriver.DeviceList;
+
+ while (TmpDev != NULL) {
+ Count++;
+ TmpDev = TmpDev->Next;
+ }
+
+ return Count;
+}
+
+/**
+ Get devcie list info.
+
+ @retval return the device list pointer.
+**/
+OPAL_DRIVER_DEVICE*
+OpalDriverGetDeviceList(
+ VOID
+ )
+{
+ return mOpalDriver.DeviceList;
+}
+
+/**
+ ReadyToBoot callback to send BlockSid command.
+
+ @param Event Pointer to this event
+ @param Context Event handler private Data
+
+**/
+VOID
+EFIAPI
+ReadyToBootCallback (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ OPAL_DRIVER_DEVICE *Itr;
+ TCG_RESULT Result;
+ OPAL_SESSION Session;
+ UINT32 PpStorageFlag;
+
+ gBS->CloseEvent (Event);
+
+ PpStorageFlag = Tcg2PhysicalPresenceLibGetManagementFlags ();
+ if ((PpStorageFlag & TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
+ //
+ // Send BlockSID command to each Opal disk
+ //
+ Itr = mOpalDriver.DeviceList;
+ while (Itr != NULL) {
+ if (Itr->OpalDisk.SupportedAttributes.BlockSid) {
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Itr->OpalDisk.Sscp;
+ Session.MediaId = Itr->OpalDisk.MediaId;
+ Session.OpalBaseComId = Itr->OpalDisk.OpalBaseComId;
+
+ Result = OpalBlockSid (&Session, TRUE); // HardwareReset must always be TRUE
+ if (Result != TcgResultSuccess) {
+ DEBUG ((DEBUG_ERROR, "OpalBlockSid fail\n"));
+ break;
+ }
+ }
+
+ Itr = Itr->Next;
+ }
+ }
+}
+
+/**
+ Stop this Controller.
+
+ @param Dev The device need to be stopped.
+
+**/
+VOID
+OpalDriverStopDevice (
+ OPAL_DRIVER_DEVICE *Dev
+ )
+{
+ //
+ // free each name
+ //
+ FreePool(Dev->Name16);
+
+ //
+ // remove OPAL_DRIVER_DEVICE from the list
+ // it updates the controllerList pointer
+ //
+ RemoveDevice(Dev);
+
+ //
+ // close protocols that were opened
+ //
+ gBS->CloseProtocol(
+ Dev->Handle,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ gOpalDriverBinding.DriverBindingHandle,
+ Dev->Handle
+ );
+
+ gBS->CloseProtocol(
+ Dev->Handle,
+ &gEfiBlockIoProtocolGuid,
+ gOpalDriverBinding.DriverBindingHandle,
+ Dev->Handle
+ );
+
+ FreePool(Dev);
+}
+
+/**
+ Get devcie name through the component name protocol.
+
+ @param[in] AllHandlesBuffer The handle buffer for current system.
+ @param[in] NumAllHandles The number of handles for the handle buffer.
+ @param[in] Dev The device which need to get name.
+ @param[in] UseComp1 Whether use component name or name2 protocol.
+
+ @retval TRUE Find the name for this device.
+ @retval FALSE Not found the name for this device.
+**/
+BOOLEAN
+OpalDriverGetDeviceNameByProtocol(
+ EFI_HANDLE *AllHandlesBuffer,
+ UINTN NumAllHandles,
+ OPAL_DRIVER_DEVICE *Dev,
+ BOOLEAN UseComp1
+ )
+{
+ EFI_HANDLE* ProtocolHandlesBuffer;
+ UINTN NumProtocolHandles;
+ EFI_STATUS Status;
+ EFI_COMPONENT_NAME2_PROTOCOL* Cnp1_2; // efi component name and componentName2 have same layout
+ EFI_GUID Protocol;
+ UINTN StrLength;
+ EFI_DEVICE_PATH_PROTOCOL* TmpDevPath;
+ UINTN Index1;
+ UINTN Index2;
+ EFI_HANDLE TmpHandle;
+ CHAR16 *DevName;
+
+ if (Dev == NULL || AllHandlesBuffer == NULL || NumAllHandles == 0) {
+ return FALSE;
+ }
+
+ Protocol = UseComp1 ? gEfiComponentNameProtocolGuid : gEfiComponentName2ProtocolGuid;
+
+ //
+ // Find all EFI_HANDLES with protocol
+ //
+ Status = gBS->LocateHandleBuffer(
+ ByProtocol,
+ &Protocol,
+ NULL,
+ &NumProtocolHandles,
+ &ProtocolHandlesBuffer
+ );
+ if (EFI_ERROR(Status)) {
+ return FALSE;
+ }
+
+
+ //
+ // Exit early if no supported devices
+ //
+ if (NumProtocolHandles == 0) {
+ return FALSE;
+ }
+
+ //
+ // Get printable name by iterating through all protocols
+ // using the handle as the child, and iterate through all handles for the controller
+ // exit loop early once found, if not found, then delete device
+ // storage security protocol instances already exist, add them to internal list
+ //
+ Status = EFI_DEVICE_ERROR;
+ for (Index1 = 0; Index1 < NumProtocolHandles; Index1++) {
+ DevName = NULL;
+
+ if (Dev->Name16 != NULL) {
+ return TRUE;
+ }
+
+ TmpHandle = ProtocolHandlesBuffer[Index1];
+
+ Status = gBS->OpenProtocol(
+ TmpHandle,
+ &Protocol,
+ (VOID**)&Cnp1_2,
+ gImageHandle,
+ NULL,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (EFI_ERROR(Status) || Cnp1_2 == NULL) {
+ continue;
+ }
+
+ //
+ // Use all handles array as controller handle
+ //
+ for (Index2 = 0; Index2 < NumAllHandles; Index2++) {
+ Status = Cnp1_2->GetControllerName(
+ Cnp1_2,
+ AllHandlesBuffer[Index2],
+ Dev->Handle,
+ LANGUAGE_ISO_639_2_ENGLISH,
+ &DevName
+ );
+ if (EFI_ERROR(Status)) {
+ Status = Cnp1_2->GetControllerName(
+ Cnp1_2,
+ AllHandlesBuffer[Index2],
+ Dev->Handle,
+ LANGUAGE_RFC_3066_ENGLISH,
+ &DevName
+ );
+ }
+ if (!EFI_ERROR(Status) && DevName != NULL) {
+ StrLength = StrLen(DevName) + 1; // Add one for NULL terminator
+ Dev->Name16 = AllocateZeroPool(StrLength * sizeof (CHAR16));
+ ASSERT (Dev->Name16 != NULL);
+ StrCpyS (Dev->Name16, StrLength, DevName);
+ Dev->NameZ = (CHAR8*)AllocateZeroPool(StrLength);
+ UnicodeStrToAsciiStrS (DevName, Dev->NameZ, StrLength);
+
+ //
+ // Retrieve bridge BDF info and port number or namespace depending on type
+ //
+ TmpDevPath = NULL;
+ Status = gBS->OpenProtocol(
+ Dev->Handle,
+ &gEfiDevicePathProtocolGuid,
+ (VOID**)&TmpDevPath,
+ gImageHandle,
+ NULL,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (!EFI_ERROR(Status)) {
+ Dev->OpalDevicePath = DuplicateDevicePath (TmpDevPath);
+ return TRUE;
+ }
+
+ if (Dev->Name16 != NULL) {
+ FreePool(Dev->Name16);
+ Dev->Name16 = NULL;
+ }
+ if (Dev->NameZ != NULL) {
+ FreePool(Dev->NameZ);
+ Dev->NameZ = NULL;
+ }
+ }
+ }
+ }
+
+ return FALSE;
+}
+
+/**
+ Get devcie name through the component name protocol.
+
+ @param[in] Dev The device which need to get name.
+
+ @retval TRUE Find the name for this device.
+ @retval FALSE Not found the name for this device.
+**/
+BOOLEAN
+OpalDriverGetDriverDeviceName(
+ OPAL_DRIVER_DEVICE *Dev
+ )
+{
+ EFI_HANDLE* AllHandlesBuffer;
+ UINTN NumAllHandles;
+ EFI_STATUS Status;
+
+ if (Dev == NULL) {
+ DEBUG((DEBUG_ERROR | DEBUG_INIT, "OpalDriverGetDriverDeviceName Exiting, Dev=NULL\n"));
+ return FALSE;
+ }
+
+ //
+ // Iterate through ComponentName2 handles to get name, if fails, try ComponentName
+ //
+ if (Dev->Name16 == NULL) {
+ DEBUG((DEBUG_ERROR | DEBUG_INIT, "Name is null, update it\n"));
+ //
+ // Find all EFI_HANDLES
+ //
+ Status = gBS->LocateHandleBuffer(
+ AllHandles,
+ NULL,
+ NULL,
+ &NumAllHandles,
+ &AllHandlesBuffer
+ );
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_INFO, "LocateHandleBuffer for AllHandles failed %r\n", Status ));
+ return FALSE;
+ }
+
+ //
+ // Try component Name2
+ //
+ if (!OpalDriverGetDeviceNameByProtocol(AllHandlesBuffer, NumAllHandles, Dev, FALSE)) {
+ DEBUG((DEBUG_ERROR | DEBUG_INIT, "ComponentName2 failed to get device name, try ComponentName\n"));
+ if (!OpalDriverGetDeviceNameByProtocol(AllHandlesBuffer, NumAllHandles, Dev, TRUE)) {
+ DEBUG((DEBUG_ERROR | DEBUG_INIT, "ComponentName failed to get device name, skip device\n"));
+ return FALSE;
+ }
+ }
+ }
+
+ return TRUE;
+}
+
+/**
+ Main entry for this driver.
+
+ @param ImageHandle Image Handle this driver.
+ @param SystemTable Pointer to SystemTable.
+
+ @retval EFI_SUCESS This function always complete successfully.
+**/
+EFI_STATUS
+EFIAPI
+EfiDriverEntryPoint(
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE* SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT ReadyToBootEvent;
+ EFI_EVENT EndOfDxeEvent;
+
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gOpalDriverBinding,
+ ImageHandle,
+ &gOpalComponentName,
+ &gOpalComponentName2
+ );
+
+ if (EFI_ERROR(Status)) {
+ DEBUG((DEBUG_ERROR, "Install protocols to Opal driver Handle failed\n"));
+ return Status ;
+ }
+
+ //
+ // Initialize Driver object
+ //
+ ZeroMem(&mOpalDriver, sizeof(mOpalDriver));
+ mOpalDriver.Handle = ImageHandle;
+
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ OpalEndOfDxeEventNotify,
+ NULL,
+ &gEfiEndOfDxeEventGroupGuid,
+ &EndOfDxeEvent
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // register a ReadyToBoot event callback for sending BlockSid command
+ //
+ Status = EfiCreateEventReadyToBootEx (
+ TPL_CALLBACK,
+ ReadyToBootCallback,
+ (VOID *) &ImageHandle,
+ &ReadyToBootEvent
+ );
+
+ //
+ // Install Hii packages.
+ //
+ HiiInstall();
+
+ return Status;
+}
+
+/**
+ Tests to see if this driver supports a given controller.
+
+ This function checks to see if the controller contains an instance of the
+ EFI_STORAGE_SECURITY_COMMAND_PROTOCOL and the EFI_BLOCK_IO_PROTOCL
+ and returns EFI_SUCCESS if it does.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The Handle of the controller to test. This Handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath This parameter is ignored.
+
+ @retval EFI_SUCCESS The device contains required protocols
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by the driver
+ specified by This.
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by a different
+ driver or an application that requires exclusive access.
+ Currently not implemented.
+ @retval EFI_UNSUPPORTED The device does not contain requires protocols
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverBindingSupported(
+ IN EFI_DRIVER_BINDING_PROTOCOL* This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_STORAGE_SECURITY_COMMAND_PROTOCOL* SecurityCommand;
+ EFI_BLOCK_IO_PROTOCOL* BlkIo;
+
+ if (mOpalEndOfDxe) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Test EFI_STORAGE_SECURITY_COMMAND_PROTOCOL on controller Handle.
+ //
+ Status = gBS->OpenProtocol(
+ Controller,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ ( VOID ** )&SecurityCommand,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (Status == EFI_ALREADY_STARTED) {
+ return EFI_SUCCESS;
+ }
+
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
+ //
+ // Close protocol and reopen in Start call
+ //
+ gBS->CloseProtocol(
+ Controller,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ //
+ // Test EFI_BLOCK_IO_PROTOCOL on controller Handle, required by EFI_STORAGE_SECURITY_COMMAND_PROTOCOL
+ // function APIs
+ //
+ Status = gBS->OpenProtocol(
+ Controller,
+ &gEfiBlockIoProtocolGuid,
+ (VOID **)&BlkIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+
+ if (EFI_ERROR(Status)) {
+ DEBUG((DEBUG_INFO, "No EFI_BLOCK_IO_PROTOCOL on controller\n"));
+ return Status;
+ }
+
+ //
+ // Close protocol and reopen in Start call
+ //
+ gBS->CloseProtocol(
+ Controller,
+ &gEfiBlockIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Enables Opal Management on a supported device if available.
+
+ The start function is designed to be called after the Opal UEFI Driver has confirmed the
+ "controller", which is a child Handle, contains the EF_STORAGE_SECURITY_COMMAND protocols.
+ This function will complete the other necessary checks, such as verifying the device supports
+ the correct version of Opal. Upon verification, it will add the device to the
+ Opal HII list in order to expose Opal managmeent options.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The Handle of the controller to start. This Handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the Handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child Handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS Opal management was enabled.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failed to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverBindingStart(
+ IN EFI_DRIVER_BINDING_PROTOCOL* This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_BLOCK_IO_PROTOCOL *BlkIo;
+ OPAL_DRIVER_DEVICE *Dev;
+ OPAL_DRIVER_DEVICE *Itr;
+ BOOLEAN Result;
+
+ Itr = mOpalDriver.DeviceList;
+ while (Itr != NULL) {
+ if (Controller == Itr->Handle) {
+ return EFI_SUCCESS;
+ }
+ Itr = Itr->Next;
+ }
+
+ //
+ // Create internal device for tracking. This allows all disks to be tracked
+ // by same HII form
+ //
+ Dev = (OPAL_DRIVER_DEVICE*)AllocateZeroPool(sizeof(OPAL_DRIVER_DEVICE));
+ if (Dev == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ Dev->Handle = Controller;
+
+ //
+ // Open EFI_STORAGE_SECURITY_COMMAND_PROTOCOL to perform Opal supported checks
+ //
+ Status = gBS->OpenProtocol(
+ Controller,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ (VOID **)&Dev->Sscp,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR(Status)) {
+ FreePool(Dev);
+ return Status;
+ }
+
+ //
+ // Open EFI_BLOCK_IO_PROTOCOL on controller Handle, required by EFI_STORAGE_SECURITY_COMMAND_PROTOCOL
+ // function APIs
+ //
+ Status = gBS->OpenProtocol(
+ Controller,
+ &gEfiBlockIoProtocolGuid,
+ (VOID **)&BlkIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR(Status)) {
+ //
+ // Close storage security that was opened
+ //
+ gBS->CloseProtocol(
+ Controller,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ FreePool(Dev);
+ return Status;
+ }
+
+ //
+ // Save mediaId
+ //
+ Dev->MediaId = BlkIo->Media->MediaId;
+
+ gBS->CloseProtocol(
+ Controller,
+ &gEfiBlockIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ //
+ // Acquire Ascii printable name of child, if not found, then ignore device
+ //
+ Result = OpalDriverGetDriverDeviceName (Dev);
+ if (!Result) {
+ goto Done;
+ }
+
+ Status = OpalDiskInitialize (Dev);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ AddDeviceToTail(Dev);
+
+ //
+ // Check if device is locked and prompt for password.
+ //
+ OpalDriverRequestPassword (Dev, L"Unlock:");
+
+ //
+ // Process OPAL request from last boot.
+ //
+ ProcessOpalRequest (Dev);
+
+ return EFI_SUCCESS;
+
+Done:
+ //
+ // free device, close protocols and exit
+ //
+ gBS->CloseProtocol(
+ Controller,
+ &gEfiStorageSecurityCommandProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ FreePool(Dev);
+
+ return EFI_DEVICE_ERROR;
+}
+
+/**
+ Stop this driver on Controller.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to stop driver on
+ @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
+ children is zero stop the entire bus driver.
+ @param ChildHandleBuffer List of Child Handles to Stop.
+
+ @retval EFI_SUCCESS This driver is removed Controller.
+ @retval other This driver could not be removed from this device.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverBindingStop(
+ EFI_DRIVER_BINDING_PROTOCOL* This,
+ EFI_HANDLE Controller,
+ UINTN NumberOfChildren,
+ EFI_HANDLE* ChildHandleBuffer
+ )
+{
+ OPAL_DRIVER_DEVICE* Itr;
+
+ Itr = mOpalDriver.DeviceList;
+
+ //
+ // does Controller match any of the devices we are managing for Opal
+ //
+ while (Itr != NULL) {
+ if (Itr->Handle == Controller) {
+ OpalDriverStopDevice (Itr);
+ return EFI_SUCCESS;
+ }
+
+ Itr = Itr->Next;
+ }
+
+ return EFI_NOT_FOUND;
+}
+
+
+/**
+ Unloads UEFI Driver. Very useful for debugging and testing.
+
+ @param ImageHandle Image Handle this driver.
+
+ @retval EFI_SUCCESS This function always complete successfully.
+ @retval EFI_INVALID_PARAMETER The input ImageHandle is not valid.
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverUnload (
+ IN EFI_HANDLE ImageHandle
+ )
+{
+ EFI_STATUS Status;
+ OPAL_DRIVER_DEVICE *Itr;
+
+ Status = EFI_SUCCESS;
+
+ if (ImageHandle != gImageHandle) {
+ return (EFI_INVALID_PARAMETER);
+ }
+
+ //
+ // Uninstall any interface added to each device by us
+ //
+ while (mOpalDriver.DeviceList) {
+ Itr = mOpalDriver.DeviceList;
+ //
+ // Remove OPAL_DRIVER_DEVICE from the list
+ // it updates the controllerList pointer
+ //
+ OpalDriverStopDevice(Itr);
+ }
+
+ //
+ // Uninstall the HII capability
+ //
+ Status = HiiUninstall();
+
+ return Status;
+}
+
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
new file mode 100644
index 000000000000..a66b5a5345ff
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
@@ -0,0 +1,613 @@
+/** @file
+ Values defined and used by the Opal UEFI Driver.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _OPAL_DRIVER_H_
+#define _OPAL_DRIVER_H_
+
+#include <PiDxe.h>
+
+#include <IndustryStandard/Pci.h>
+
+#include <Protocol/PciIo.h>
+#include <Protocol/SmmCommunication.h>
+#include <Protocol/BlockIo.h>
+#include <Protocol/LoadedImage.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/DevicePathToText.h>
+#include <Protocol/StorageSecurityCommand.h>
+
+#include <Guid/EventGroup.h>
+
+#include <Library/UefiLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Library/DxeServicesTableLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/BaseLib.h>
+#include <Library/PrintLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/HiiLib.h>
+#include <Library/UefiHiiServicesLib.h>
+#include <Library/PciLib.h>
+#include <Library/S3BootScriptLib.h>
+#include <Library/LockBoxLib.h>
+#include <Library/TcgStorageOpalLib.h>
+#include <Library/Tcg2PhysicalPresenceLib.h>
+
+#include "OpalPasswordCommon.h"
+#include "OpalHiiFormValues.h"
+
+#define EFI_DRIVER_NAME_UNICODE L"1.0 UEFI Opal Driver"
+
+// UEFI 2.1
+#define LANGUAGE_RFC_3066_ENGLISH ((CHAR8*)"en")
+
+// UEFI/EFI < 2.1
+#define LANGUAGE_ISO_639_2_ENGLISH ((CHAR8*)"eng")
+
+#define CONCAT_(x, y) x ## y
+#define CONCAT(x, y) CONCAT_(x, y)
+
+#define UNICODE_STR(x) CONCAT( L, x )
+
+extern EFI_DRIVER_BINDING_PROTOCOL gOpalDriverBinding;
+extern EFI_COMPONENT_NAME_PROTOCOL gOpalComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gOpalComponentName2;
+
+#define OPAL_MSID_LENGHT 128
+
+#define MAX_PASSWORD_SIZE 32
+#define MAX_PASSWORD_TRY_COUNT 5
+
+// PSID Length
+#define PSID_CHARACTER_LENGTH 0x20
+#define MAX_PSID_TRY_COUNT 5
+
+#pragma pack(1)
+
+//
+// Structure that is used to represent the available actions for an OpalDisk.
+// The data can then be utilized to expose/hide certain actions available to an end user
+// by the consumer of this library.
+//
+typedef struct {
+ //
+ // Indicates if the disk can support PSID Revert action. should verify disk supports PSID authority
+ //
+ UINT16 PsidRevert : 1;
+
+ //
+ // Indicates if the disk can support Revert action
+ //
+ UINT16 Revert : 1;
+
+ //
+ // Indicates if the user must keep data for revert action. It is true if no media encryption is supported.
+ //
+ UINT16 RevertKeepDataForced : 1;
+
+ //
+ // Indicates if the disk can support set Admin password
+ //
+ UINT16 AdminPass : 1;
+
+ //
+ // Indicates if the disk can support set User password. This action requires that a user
+ // password is first enabled.
+ //
+ UINT16 UserPass : 1;
+
+ //
+ // Indicates if unlock action is available. Requires disk to be currently locked.
+ //
+ UINT16 Unlock : 1;
+
+ //
+ // Indicates if Secure Erase action is available. Action requires admin credentials and media encryption support.
+ //
+ UINT16 SecureErase : 1;
+
+ //
+ // Indicates if Disable User action is available. Action requires admin credentials.
+ //
+ UINT16 DisableUser : 1;
+} OPAL_DISK_ACTIONS;
+
+//
+// Structure that is used to represent an OPAL_DISK.
+//
+typedef struct {
+ UINT32 MsidLength; // Byte length of MSID Pin for device
+ UINT8 Msid[OPAL_MSID_LENGHT]; // MSID Pin for device
+ EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *Sscp;
+ UINT32 MediaId; // MediaId is used by Ssc Protocol.
+ EFI_DEVICE_PATH_PROTOCOL *OpalDevicePath;
+ UINT16 OpalBaseComId; // Opal SSC 1 base com id.
+ OPAL_OWNER_SHIP Owner;
+ OPAL_DISK_SUPPORT_ATTRIBUTE SupportedAttributes;
+ TCG_LOCKING_FEATURE_DESCRIPTOR LockingFeature; // Locking Feature Descriptor retrieved from performing a Level 0 Discovery
+ UINT8 PasswordLength;
+ UINT8 Password[MAX_PASSWORD_SIZE];
+} OPAL_DISK;
+
+//
+// Device with block IO protocol
+//
+typedef struct _OPAL_DRIVER_DEVICE OPAL_DRIVER_DEVICE;
+
+struct _OPAL_DRIVER_DEVICE {
+ OPAL_DRIVER_DEVICE *Next; ///< Linked list pointer
+ EFI_HANDLE Handle; ///< Device handle
+ OPAL_DISK OpalDisk; ///< User context
+ CHAR16 *Name16; ///< Allocated/freed by UEFI Filter Driver at device creation/removal
+ CHAR8 *NameZ; ///< Allocated/freed by UEFI Filter Driver at device creation/removal
+ UINT32 MediaId; ///< Required parameter for EFI_STORAGE_SECURITY_COMMAND_PROTOCOL, from BLOCK_IO_MEDIA
+
+ EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *Sscp; /// Device protocols consumed
+ EFI_DEVICE_PATH_PROTOCOL *OpalDevicePath;
+};
+
+//
+// Opal Driver UEFI Driver Model
+//
+typedef struct {
+ EFI_HANDLE Handle; ///< Driver image handle
+ OPAL_DRIVER_DEVICE *DeviceList; ///< Linked list of controllers owned by this Driver
+} OPAL_DRIVER;
+
+#pragma pack()
+
+//
+// Retrieves a OPAL_DRIVER_DEVICE based on the pointer to its StorageSecurity protocol.
+//
+#define DRIVER_DEVICE_FROM_OPALDISK(OpalDiskPointer) (OPAL_DRIVER_DEVICE*)(BASE_CR(OpalDiskPointer, OPAL_DRIVER_DEVICE, OpalDisk))
+
+/**
+ Get devcie list info.
+
+ @retval return the device list pointer.
+**/
+OPAL_DRIVER_DEVICE*
+OpalDriverGetDeviceList(
+ VOID
+ );
+
+/**
+ Get devcie name through the component name protocol.
+
+ @param[in] Dev The device which need to get name.
+
+ @retval TRUE Find the name for this device.
+ @retval FALSE Not found the name for this device.
+**/
+BOOLEAN
+OpalDriverGetDriverDeviceName(
+ OPAL_DRIVER_DEVICE *Dev
+ );
+
+/**
+ Get current device count.
+
+ @retval return the current created device count.
+
+**/
+UINT8
+GetDeviceCount (
+ VOID
+ );
+
+/**
+ Update password for the Opal disk.
+
+ @param[in, out] OpalDisk The disk to update password.
+ @param[in] Password The input password.
+ @param[in] PasswordLength The input password length.
+
+**/
+VOID
+OpalSupportUpdatePassword (
+ IN OUT OPAL_DISK *OpalDisk,
+ IN VOID *Password,
+ IN UINT32 PasswordLength
+ );
+
+/**
+
+ The function performs determines the available actions for the OPAL_DISK provided.
+
+ @param[in] SupportedAttributes The support attribute for the device.
+ @param[in] LockingFeature The locking status for the device.
+ @param[in] OwnerShip The ownership for the device.
+ @param[out] AvalDiskActions Pointer to fill-out with appropriate disk actions.
+
+**/
+TCG_RESULT
+EFIAPI
+OpalSupportGetAvailableActions(
+ IN OPAL_DISK_SUPPORT_ATTRIBUTE *SupportedAttributes,
+ IN TCG_LOCKING_FEATURE_DESCRIPTOR *LockingFeature,
+ IN UINT16 OwnerShip,
+ OUT OPAL_DISK_ACTIONS *AvalDiskActions
+ );
+
+/**
+ Enable Opal Feature for the input device.
+
+ @param[in] Session The opal session for the opal device.
+ @param[in] Msid Msid
+ @param[in] MsidLength Msid Length
+ @param[in] Password Admin password
+ @param[in] PassLength Length of password in bytes
+
+**/
+TCG_RESULT
+EFIAPI
+OpalSupportEnableOpalFeature (
+ IN OPAL_SESSION *Session,
+ IN VOID *Msid,
+ IN UINT32 MsidLength,
+ IN VOID *Password,
+ IN UINT32 PassLength
+ );
+
+/**
+ Unloads UEFI Driver. Very useful for debugging and testing.
+
+ @param ImageHandle Image handle this driver.
+
+ @retval EFI_SUCCESS This function always complete successfully.
+ @retval EFI_INVALID_PARAMETER The input ImageHandle is not valid.
+**/
+EFI_STATUS
+EFIAPI
+EfiDriverUnload(
+ EFI_HANDLE ImageHandle
+ );
+
+
+/**
+ Test to see if this driver supports Controller.
+
+ @param This Protocol instance pointer.
+ @param ControllerHandle Handle of device to test
+ @param RemainingDevicePath Optional parameter use to pick a specific child
+ device to start.
+
+ @retval EFI_SUCCESS This driver supports this device.
+ @retval EFI_ALREADY_STARTED This driver is already running on this device.
+ @retval other This driver does not support this device.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverBindingSupported(
+ EFI_DRIVER_BINDING_PROTOCOL* This,
+ EFI_HANDLE Controller,
+ EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
+ );
+
+/**
+ Enables Opal Management on a supported device if available.
+
+ The start function is designed to be called after the Opal UEFI Driver has confirmed the
+ "controller", which is a child handle, contains the EF_STORAGE_SECURITY_COMMAND protocols.
+ This function will complete the other necessary checks, such as verifying the device supports
+ the correct version of Opal. Upon verification, it will add the device to the
+ Opal HII list in order to expose Opal managmeent options.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS Opal management was enabled.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failed to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverBindingStart(
+ EFI_DRIVER_BINDING_PROTOCOL* This,
+ EFI_HANDLE Controller,
+ EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
+ );
+
+/**
+ Stop this driver on Controller.
+
+ @param This Protocol instance pointer.
+ @param Controller Handle of device to stop driver on
+ @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
+ children is zero stop the entire bus driver.
+ @param ChildHandleBuffer List of Child Handles to Stop.
+
+ @retval EFI_SUCCESS This driver is removed Controller.
+ @retval other This driver could not be removed from this device.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverBindingStop(
+ EFI_DRIVER_BINDING_PROTOCOL* This,
+ EFI_HANDLE Controller,
+ UINTN NumberOfChildren,
+ EFI_HANDLE* ChildHandleBuffer
+ );
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverComponentNameGetDriverName(
+ EFI_COMPONENT_NAME_PROTOCOL* This,
+ CHAR8* Language,
+ CHAR16** DriverName
+ );
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverComponentNameGetControllerName(
+ EFI_COMPONENT_NAME_PROTOCOL* This,
+ EFI_HANDLE ControllerHandle,
+ EFI_HANDLE ChildHandle,
+ CHAR8* Language,
+ CHAR16** ControllerName
+ );
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverComponentName2GetDriverName(
+ EFI_COMPONENT_NAME2_PROTOCOL* This,
+ CHAR8* Language,
+ CHAR16** DriverName
+ );
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalEfiDriverComponentName2GetControllerName(
+ EFI_COMPONENT_NAME2_PROTOCOL* This,
+ EFI_HANDLE ControllerHandle,
+ EFI_HANDLE ChildHandle,
+ CHAR8* Language,
+ CHAR16** ControllerName
+ );
+
+#endif //_OPAL_DRIVER_H_
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
new file mode 100644
index 000000000000..e4972227b669
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
@@ -0,0 +1,1178 @@
+/** @file
+ Implementation of the HII for the Opal UEFI Driver.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "OpalHii.h"
+
+//
+// This is the generated IFR binary Data for each formset defined in VFR.
+// This Data array is ready to be used as input of HiiAddPackages() to
+// create a packagelist (which contains Form packages, String packages, etc).
+//
+extern UINT8 OpalPasswordFormBin[];
+
+//
+// This is the generated String package Data for all .UNI files.
+// This Data array is ready to be used as input of HiiAddPackages() to
+// create a packagelist (which contains Form packages, String packages, etc).
+//
+extern UINT8 OpalPasswordDxeStrings[];
+
+CHAR16 OpalPasswordStorageName[] = L"OpalHiiConfig";
+
+EFI_HII_CONFIG_ACCESS_PROTOCOL gHiiConfigAccessProtocol;
+
+//
+// Handle to the list of HII packages (forms and strings) for this driver
+//
+EFI_HII_HANDLE gHiiPackageListHandle = NULL;
+
+//
+// Package List GUID containing all form and string packages
+//
+const EFI_GUID gHiiPackageListGuid = PACKAGE_LIST_GUID;
+const EFI_GUID gHiiSetupVariableGuid = SETUP_VARIABLE_GUID;
+
+//
+// Structure that contains state of the HII
+// This structure is updated by Hii.cpp and its contents
+// is rendered in the HII.
+//
+OPAL_HII_CONFIGURATION gHiiConfiguration;
+
+//
+// The device path containing the VENDOR_DEVICE_PATH and EFI_DEVICE_PATH_PROTOCOL
+//
+HII_VENDOR_DEVICE_PATH gHiiVendorDevicePath = {
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_VENDOR_DP,
+ {
+ (UINT8)(sizeof(VENDOR_DEVICE_PATH)),
+ (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8)
+ }
+ },
+ OPAL_PASSWORD_CONFIG_GUID
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ (UINT8)(END_DEVICE_PATH_LENGTH),
+ (UINT8)((END_DEVICE_PATH_LENGTH) >> 8)
+ }
+ }
+};
+
+/**
+ Get saved OPAL request.
+
+ @param[in] OpalDisk The disk needs to get the saved OPAL request.
+ @param[out] OpalRequest OPAL request got.
+
+**/
+VOID
+GetSavedOpalRequest (
+ IN OPAL_DISK *OpalDisk,
+ OUT OPAL_REQUEST *OpalRequest
+ )
+{
+ EFI_STATUS Status;
+ OPAL_REQUEST_VARIABLE *TempVariable;
+ OPAL_REQUEST_VARIABLE *Variable;
+ UINTN VariableSize;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePathInVariable;
+ UINTN DevicePathSizeInVariable;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ UINTN DevicePathSize;
+
+ DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
+
+ Variable = NULL;
+ VariableSize = 0;
+
+ Status = GetVariable2 (
+ OPAL_REQUEST_VARIABLE_NAME,
+ &gHiiSetupVariableGuid,
+ (VOID **) &Variable,
+ &VariableSize
+ );
+ if (EFI_ERROR (Status) || (Variable == NULL)) {
+ return;
+ }
+
+ TempVariable = Variable;
+ while ((VariableSize > sizeof (OPAL_REQUEST_VARIABLE)) &&
+ (VariableSize >= TempVariable->Length) &&
+ (TempVariable->Length > sizeof (OPAL_REQUEST_VARIABLE))) {
+ DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN) TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
+ DevicePathSizeInVariable = GetDevicePathSize (DevicePathInVariable);
+ DevicePath = OpalDisk->OpalDevicePath;
+ DevicePathSize = GetDevicePathSize (DevicePath);
+ if ((DevicePathSize == DevicePathSizeInVariable) &&
+ (CompareMem (DevicePath, DevicePathInVariable, DevicePathSize) == 0)) {
+ //
+ // Found the node for the OPAL device.
+ // Get the OPAL request.
+ //
+ CopyMem (OpalRequest, &TempVariable->OpalRequest, sizeof (OPAL_REQUEST));
+ DEBUG ((
+ DEBUG_INFO,
+ "OpalRequest got: 0x%x\n",
+ *OpalRequest
+ ));
+ break;
+ }
+ VariableSize -= TempVariable->Length;
+ TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) TempVariable + TempVariable->Length);
+ }
+
+ FreePool (Variable);
+
+ DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
+}
+
+/**
+ Save OPAL request.
+
+ @param[in] OpalDisk The disk has OPAL request to save.
+ @param[in] OpalRequest OPAL request to save.
+
+**/
+VOID
+SaveOpalRequest (
+ IN OPAL_DISK *OpalDisk,
+ IN OPAL_REQUEST OpalRequest
+ )
+{
+ EFI_STATUS Status;
+ OPAL_REQUEST_VARIABLE *TempVariable;
+ UINTN TempVariableSize;
+ OPAL_REQUEST_VARIABLE *Variable;
+ UINTN VariableSize;
+ OPAL_REQUEST_VARIABLE *NewVariable;
+ UINTN NewVariableSize;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePathInVariable;
+ UINTN DevicePathSizeInVariable;
+ EFI_DEVICE_PATH_PROTOCOL *DevicePath;
+ UINTN DevicePathSize;
+
+ DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
+
+ DEBUG ((
+ DEBUG_INFO,
+ "OpalRequest to save: 0x%x\n",
+ OpalRequest
+ ));
+
+ Variable = NULL;
+ VariableSize = 0;
+ NewVariable = NULL;
+ NewVariableSize = 0;
+
+ Status = GetVariable2 (
+ OPAL_REQUEST_VARIABLE_NAME,
+ &gHiiSetupVariableGuid,
+ (VOID **) &Variable,
+ &VariableSize
+ );
+ if (!EFI_ERROR (Status) && (Variable != NULL)) {
+ TempVariable = Variable;
+ TempVariableSize = VariableSize;
+ while ((TempVariableSize > sizeof (OPAL_REQUEST_VARIABLE)) &&
+ (TempVariableSize >= TempVariable->Length) &&
+ (TempVariable->Length > sizeof (OPAL_REQUEST_VARIABLE))) {
+ DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN) TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
+ DevicePathSizeInVariable = GetDevicePathSize (DevicePathInVariable);
+ DevicePath = OpalDisk->OpalDevicePath;
+ DevicePathSize = GetDevicePathSize (DevicePath);
+ if ((DevicePathSize == DevicePathSizeInVariable) &&
+ (CompareMem (DevicePath, DevicePathInVariable, DevicePathSize) == 0)) {
+ //
+ // Found the node for the OPAL device.
+ // Update the OPAL request.
+ //
+ CopyMem (&TempVariable->OpalRequest, &OpalRequest, sizeof (OPAL_REQUEST));
+ NewVariable = Variable;
+ NewVariableSize = VariableSize;
+ break;
+ }
+ TempVariableSize -= TempVariable->Length;
+ TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) TempVariable + TempVariable->Length);
+ }
+ if (NewVariable == NULL) {
+ //
+ // The node for the OPAL device is not found.
+ // Create node for the OPAL device.
+ //
+ DevicePath = OpalDisk->OpalDevicePath;
+ DevicePathSize = GetDevicePathSize (DevicePath);
+ NewVariableSize = VariableSize + sizeof (OPAL_REQUEST_VARIABLE) + DevicePathSize;
+ NewVariable = AllocatePool (NewVariableSize);
+ ASSERT (NewVariable != NULL);
+ CopyMem (NewVariable, Variable, VariableSize);
+ TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) NewVariable + VariableSize);
+ TempVariable->Length = (UINT32) (sizeof (OPAL_REQUEST_VARIABLE) + DevicePathSize);
+ CopyMem (&TempVariable->OpalRequest, &OpalRequest, sizeof (OPAL_REQUEST));
+ DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN) TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
+ CopyMem (DevicePathInVariable, DevicePath, DevicePathSize);
+ }
+ } else {
+ DevicePath = OpalDisk->OpalDevicePath;
+ DevicePathSize = GetDevicePathSize (DevicePath);
+ NewVariableSize = sizeof (OPAL_REQUEST_VARIABLE) + DevicePathSize;
+ NewVariable = AllocatePool (NewVariableSize);
+ ASSERT (NewVariable != NULL);
+ NewVariable->Length = (UINT32) (sizeof (OPAL_REQUEST_VARIABLE) + DevicePathSize);
+ CopyMem (&NewVariable->OpalRequest, &OpalRequest, sizeof (OPAL_REQUEST));
+ DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN) NewVariable + sizeof (OPAL_REQUEST_VARIABLE));
+ CopyMem (DevicePathInVariable, DevicePath, DevicePathSize);
+ }
+ Status = gRT->SetVariable (
+ OPAL_REQUEST_VARIABLE_NAME,
+ (EFI_GUID *) &gHiiSetupVariableGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS,
+ NewVariableSize,
+ NewVariable
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "OpalRequest variable set failed (%r)\n", Status));
+ }
+ if (NewVariable != Variable) {
+ FreePool (NewVariable);
+ }
+ if (Variable != NULL) {
+ FreePool (Variable);
+ }
+
+ DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
+}
+
+/**
+ Sets the current system state of global config variables.
+
+**/
+VOID
+HiiSetCurrentConfiguration(
+ VOID
+ )
+{
+ UINT32 PpStorageFlag;
+ EFI_STRING NewString;
+
+ gHiiConfiguration.NumDisks = GetDeviceCount();
+
+ //
+ // Update the BlockSID status string.
+ //
+ PpStorageFlag = Tcg2PhysicalPresenceLibGetManagementFlags ();
+
+ if ((PpStorageFlag & TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
+ NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_ENABLED), NULL);
+ if (NewString == NULL) {
+ DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
+ return;
+ }
+ } else {
+ NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISABLED), NULL);
+ if (NewString == NULL) {
+ DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
+ return;
+ }
+ }
+ HiiSetString(gHiiPackageListHandle, STRING_TOKEN(STR_BLOCKSID_STATUS1), NewString, NULL);
+ FreePool (NewString);
+
+ if ((PpStorageFlag & TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_PP_REQUIRED_FOR_ENABLE_BLOCK_SID) != 0) {
+ NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_TRUE), NULL);
+ if (NewString == NULL) {
+ DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
+ return;
+ }
+ } else {
+ NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_FALSE), NULL);
+ if (NewString == NULL) {
+ DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
+ return;
+ }
+ }
+ HiiSetString(gHiiPackageListHandle, STRING_TOKEN(STR_BLOCKSID_STATUS2), NewString, NULL);
+ FreePool (NewString);
+
+ if ((PpStorageFlag & TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_PP_REQUIRED_FOR_DISABLE_BLOCK_SID) != 0) {
+ NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_TRUE), NULL);
+ if (NewString == NULL) {
+ DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
+ return;
+ }
+ } else {
+ NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_FALSE), NULL);
+ if (NewString == NULL) {
+ DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
+ return;
+ }
+ }
+ HiiSetString(gHiiPackageListHandle, STRING_TOKEN(STR_BLOCKSID_STATUS3), NewString, NULL);
+ FreePool (NewString);
+}
+
+/**
+ Install the HII related resources.
+
+ @retval EFI_SUCCESS Install all the resources success.
+ @retval other Error occur when install the resources.
+**/
+EFI_STATUS
+HiiInstall(
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE DriverHandle;
+
+ //
+ // Clear the global configuration.
+ //
+ ZeroMem(&gHiiConfiguration, sizeof(gHiiConfiguration));
+
+ //
+ // Obtain the driver handle that the BIOS assigned us
+ //
+ DriverHandle = HiiGetDriverImageHandleCB();
+
+ //
+ // Populate the config access protocol with the three functions we are publishing
+ //
+ gHiiConfigAccessProtocol.ExtractConfig = ExtractConfig;
+ gHiiConfigAccessProtocol.RouteConfig = RouteConfig;
+ gHiiConfigAccessProtocol.Callback = DriverCallback;
+
+ //
+ // Associate the required protocols with our driver handle
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &DriverHandle,
+ &gEfiHiiConfigAccessProtocolGuid,
+ &gHiiConfigAccessProtocol, // HII callback
+ &gEfiDevicePathProtocolGuid,
+ &gHiiVendorDevicePath, // required for HII callback allow all disks to be shown in same hii
+ NULL
+ );
+
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
+ return OpalHiiAddPackages();
+}
+
+/**
+ Install the HII form and string packages.
+
+ @retval EFI_SUCCESS Install all the resources success.
+ @retval EFI_OUT_OF_RESOURCES Out of resource error.
+**/
+EFI_STATUS
+OpalHiiAddPackages(
+ VOID
+ )
+{
+ EFI_HANDLE DriverHandle;
+ CHAR16 *NewString;
+
+ DriverHandle = HiiGetDriverImageHandleCB();
+
+ //
+ // Publish the HII form and HII string packages
+ //
+ gHiiPackageListHandle = HiiAddPackages(
+ &gHiiPackageListGuid,
+ DriverHandle,
+ OpalPasswordDxeStrings,
+ OpalPasswordFormBin,
+ (VOID*)NULL
+ );
+
+ //
+ // Make sure the packages installed successfully
+ //
+ if (gHiiPackageListHandle == NULL) {
+ DEBUG ((DEBUG_INFO, "OpalHiiAddPackages failed\n"));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // Update Version String in main window
+ //
+ NewString = HiiGetDriverNameCB ();
+ if (HiiSetString(gHiiPackageListHandle, STRING_TOKEN(STR_MAIN_OPAL_VERSION), NewString, NULL) == 0) {
+ DEBUG ((DEBUG_INFO, "OpalHiiAddPackages: HiiSetString( ) failed\n"));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Uninstall the HII capability.
+
+ @retval EFI_SUCCESS Uninstall all the resources success.
+ @retval others Other errors occur when unistall the hii resource.
+**/
+EFI_STATUS
+HiiUninstall(
+ VOID
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Remove the packages we've provided to the BIOS
+ //
+ HiiRemovePackages(gHiiPackageListHandle);
+
+ //
+ // Remove the protocols from our driver handle
+ //
+ Status = gBS->UninstallMultipleProtocolInterfaces(
+ HiiGetDriverImageHandleCB(),
+ &gEfiHiiConfigAccessProtocolGuid,
+ &gHiiConfigAccessProtocol, // HII callback
+ &gEfiDevicePathProtocolGuid,
+ &gHiiVendorDevicePath, // required for HII callback
+ NULL
+ );
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_INFO, "Cannot uninstall Hii Protocols: %r\n", Status));
+ }
+
+ return Status;
+}
+
+/**
+ Updates the main menu form.
+
+ @retval EFI_SUCCESS update the main form success.
+**/
+EFI_STATUS
+HiiPopulateMainMenuForm (
+ VOID
+ )
+{
+ UINT8 Index;
+ CHAR8 *DiskName;
+ EFI_STRING_ID DiskNameId;
+ OPAL_DISK *OpalDisk;
+
+ HiiSetCurrentConfiguration();
+
+ gHiiConfiguration.SupportedDisks = 0;
+
+ for (Index = 0; Index < gHiiConfiguration.NumDisks; Index++) {
+ OpalDisk = HiiGetOpalDiskCB (Index);
+ if ((OpalDisk != NULL) && OpalFeatureSupported (&OpalDisk->SupportedAttributes)) {
+ gHiiConfiguration.SupportedDisks |= (1 << Index);
+ DiskNameId = GetDiskNameStringId (Index);
+ DiskName = HiiDiskGetNameCB (Index);
+ if ((DiskName == NULL) || (DiskNameId == 0)) {
+ return EFI_UNSUPPORTED;
+ }
+ HiiSetFormString(DiskNameId, DiskName);
+ }
+ }
+
+ OpalHiiSetBrowserData ();
+ return EFI_SUCCESS;
+}
+
+/**
+ Get disk name string id.
+
+ @param DiskIndex The input disk index info.
+
+ @retval The disk name string id.
+
+**/
+EFI_STRING_ID
+GetDiskNameStringId(
+ UINT8 DiskIndex
+ )
+{
+ switch (DiskIndex) {
+ case 0: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_0);
+ case 1: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_1);
+ case 2: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_2);
+ case 3: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_3);
+ case 4: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_4);
+ case 5: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_5);
+ }
+ return 0;
+}
+
+/**
+ This function processes the results of changes in configuration.
+
+ @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
+ @param Action Specifies the type of action taken by the browser.
+ @param QuestionId A unique value which is sent to the original
+ exporting driver so that it can identify the type
+ of data to expect.
+ @param Type The type of value for the question.
+ @param Value A pointer to the data being sent to the original
+ exporting driver.
+ @param ActionRequest On return, points to the action requested by the
+ callback function.
+
+ @retval EFI_SUCCESS The callback successfully handled the action.
+ @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the
+ variable and its data.
+ @retval EFI_DEVICE_ERROR The variable could not be saved.
+ @retval EFI_UNSUPPORTED The specified Action is not supported by the
+ callback.
+
+**/
+EFI_STATUS
+EFIAPI
+DriverCallback(
+ CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
+ EFI_BROWSER_ACTION Action,
+ EFI_QUESTION_ID QuestionId,
+ UINT8 Type,
+ EFI_IFR_TYPE_VALUE *Value,
+ EFI_BROWSER_ACTION_REQUEST *ActionRequest
+ )
+{
+ HII_KEY HiiKey;
+ UINT8 HiiKeyId;
+ UINT32 PpRequest;
+ OPAL_DISK *OpalDisk;
+
+ if (ActionRequest != NULL) {
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_NONE;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // If QuestionId is an auto-generated key (label, empty line, etc.), ignore it.
+ //
+ if ((QuestionId & HII_KEY_FLAG) == 0) {
+ return EFI_SUCCESS;
+ }
+
+ HiiKey.Raw = QuestionId;
+ HiiKeyId = (UINT8) HiiKey.KeyBits.Id;
+
+ if (Action == EFI_BROWSER_ACTION_FORM_OPEN) {
+ switch (HiiKeyId) {
+ case HII_KEY_ID_VAR_SUPPORTED_DISKS:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_VAR_SUPPORTED_DISKS\n"));
+ return HiiPopulateMainMenuForm ();
+
+ case HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS\n"));
+ return HiiPopulateDiskInfoForm();
+ }
+ } else if (Action == EFI_BROWSER_ACTION_CHANGING) {
+ switch (HiiKeyId) {
+ case HII_KEY_ID_GOTO_DISK_INFO:
+ return HiiSelectDisk((UINT8)HiiKey.KeyBits.Index);
+ }
+ } else if (Action == EFI_BROWSER_ACTION_CHANGED) {
+ switch (HiiKeyId) {
+ case HII_KEY_ID_BLOCKSID:
+ switch (Value->u8) {
+ case 0:
+ PpRequest = TCG2_PHYSICAL_PRESENCE_NO_ACTION;
+ break;
+
+ case 1:
+ PpRequest = TCG2_PHYSICAL_PRESENCE_ENABLE_BLOCK_SID;
+ break;
+
+ case 2:
+ PpRequest = TCG2_PHYSICAL_PRESENCE_DISABLE_BLOCK_SID;
+ break;
+
+ case 3:
+ PpRequest = TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_ENABLE_BLOCK_SID_FUNC_TRUE;
+ break;
+
+ case 4:
+ PpRequest = TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_ENABLE_BLOCK_SID_FUNC_FALSE;
+ break;
+
+ case 5:
+ PpRequest = TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_DISABLE_BLOCK_SID_FUNC_TRUE;
+ break;
+
+ case 6:
+ PpRequest = TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_DISABLE_BLOCK_SID_FUNC_FALSE;
+ break;
+
+ default:
+ PpRequest = TCG2_PHYSICAL_PRESENCE_NO_ACTION;
+ DEBUG ((DEBUG_ERROR, "Invalid value input!\n"));
+ break;
+ }
+ HiiSetBlockSidAction(PpRequest);
+
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
+ return EFI_SUCCESS;
+
+ case HII_KEY_ID_SET_ADMIN_PWD:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_SET_ADMIN_PWD\n"));
+ gHiiConfiguration.OpalRequest.SetAdminPwd = Value->b;
+ OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
+ if (OpalDisk != NULL) {
+ SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
+ }
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
+ return EFI_SUCCESS;
+
+ case HII_KEY_ID_SET_USER_PWD:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_SET_USER_PWD\n"));
+ gHiiConfiguration.OpalRequest.SetUserPwd = Value->b;
+ OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
+ if (OpalDisk != NULL) {
+ SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
+ }
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
+ return EFI_SUCCESS;
+
+ case HII_KEY_ID_SECURE_ERASE:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_SECURE_ERASE\n"));
+ gHiiConfiguration.OpalRequest.SecureErase = Value->b;
+ OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
+ if (OpalDisk != NULL) {
+ SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
+ }
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
+ return EFI_SUCCESS;
+
+ case HII_KEY_ID_REVERT:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_REVERT\n"));
+ gHiiConfiguration.OpalRequest.Revert = Value->b;
+ OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
+ if (OpalDisk != NULL) {
+ SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
+ }
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
+ return EFI_SUCCESS;
+ case HII_KEY_ID_KEEP_USER_DATA:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_KEEP_USER_DATA\n"));
+ gHiiConfiguration.OpalRequest.KeepUserData = Value->b;
+ OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
+ if (OpalDisk != NULL) {
+ SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
+ }
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
+ return EFI_SUCCESS;
+
+ case HII_KEY_ID_PSID_REVERT:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_PSID_REVERT\n"));
+ gHiiConfiguration.OpalRequest.PsidRevert = Value->b;
+ OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
+ if (OpalDisk != NULL) {
+ SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
+ }
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
+ return EFI_SUCCESS;
+
+ case HII_KEY_ID_DISABLE_USER:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_DISABLE_USER\n"));
+ gHiiConfiguration.OpalRequest.DisableUser = Value->b;
+ OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
+ if (OpalDisk != NULL) {
+ SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
+ }
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
+ return EFI_SUCCESS;
+
+ case HII_KEY_ID_ENABLE_FEATURE:
+ DEBUG ((DEBUG_INFO, "HII_KEY_ID_ENABLE_FEATURE\n"));
+ gHiiConfiguration.OpalRequest.EnableFeature = Value->b;
+ OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
+ if (OpalDisk != NULL) {
+ SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
+ }
+ *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
+ return EFI_SUCCESS;
+
+ default:
+ break;
+ }
+ }
+
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Update the global Disk index info.
+
+ @param Index The input disk index info.
+
+ @retval EFI_SUCCESS Update the disk index info success.
+
+**/
+EFI_STATUS
+HiiSelectDisk(
+ UINT8 Index
+ )
+{
+ OpalHiiGetBrowserData();
+ gHiiConfiguration.SelectedDiskIndex = Index;
+ OpalHiiSetBrowserData ();
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Draws the disk info form.
+
+ @retval EFI_SUCCESS Draw the disk info success.
+
+**/
+EFI_STATUS
+HiiPopulateDiskInfoForm(
+ VOID
+ )
+{
+ OPAL_DISK* OpalDisk;
+ OPAL_DISK_ACTIONS AvailActions;
+ TCG_RESULT Ret;
+ CHAR8 *DiskName;
+
+ OpalHiiGetBrowserData();
+
+ DiskName = HiiDiskGetNameCB (gHiiConfiguration.SelectedDiskIndex);
+ if (DiskName == NULL) {
+ return EFI_UNSUPPORTED;
+ }
+ HiiSetFormString(STRING_TOKEN(STR_DISK_INFO_SELECTED_DISK_NAME), DiskName);
+
+ gHiiConfiguration.SelectedDiskAvailableActions = HII_ACTION_NONE;
+ ZeroMem (&gHiiConfiguration.OpalRequest, sizeof (OPAL_REQUEST));
+ gHiiConfiguration.KeepUserDataForced = FALSE;
+
+ OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
+
+ if (OpalDisk != NULL) {
+ OpalDiskUpdateStatus (OpalDisk);
+ Ret = OpalSupportGetAvailableActions(&OpalDisk->SupportedAttributes, &OpalDisk->LockingFeature, OpalDisk->Owner, &AvailActions);
+ if (Ret == TcgResultSuccess) {
+ //
+ // Update actions, always allow PSID Revert
+ //
+ gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.PsidRevert == 1) ? HII_ACTION_PSID_REVERT : HII_ACTION_NONE;
+
+ //
+ // Always allow unlock to handle device migration
+ //
+ gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.Unlock == 1) ? HII_ACTION_UNLOCK : HII_ACTION_NONE;
+
+ if (!OpalFeatureEnabled (&OpalDisk->SupportedAttributes, &OpalDisk->LockingFeature)) {
+ if (OpalDisk->Owner == OpalOwnershipNobody) {
+ gHiiConfiguration.SelectedDiskAvailableActions |= HII_ACTION_ENABLE_FEATURE;
+
+ //
+ // Update strings
+ //
+ HiiSetFormString( STRING_TOKEN(STR_DISK_INFO_PSID_REVERT), "PSID Revert to factory default");
+ } else {
+ DEBUG ((DEBUG_INFO, "Feature disabled but ownership != nobody\n"));
+ }
+ } else {
+ gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.Revert == 1) ? HII_ACTION_REVERT : HII_ACTION_NONE;
+ gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.AdminPass == 1) ? HII_ACTION_SET_ADMIN_PWD : HII_ACTION_NONE;
+ gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.UserPass == 1) ? HII_ACTION_SET_USER_PWD : HII_ACTION_NONE;
+ gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.SecureErase == 1) ? HII_ACTION_SECURE_ERASE : HII_ACTION_NONE;
+ gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.DisableUser == 1) ? HII_ACTION_DISABLE_USER : HII_ACTION_NONE;
+
+ HiiSetFormString (STRING_TOKEN(STR_DISK_INFO_PSID_REVERT), "PSID Revert to factory default and Disable");
+
+ //
+ // Determine revert options for disk
+ // Default initialize keep user Data to be true
+ //
+ gHiiConfiguration.OpalRequest.KeepUserData = 1;
+ if (AvailActions.RevertKeepDataForced) {
+ gHiiConfiguration.KeepUserDataForced = TRUE;
+ }
+ }
+ }
+
+ GetSavedOpalRequest (OpalDisk, &gHiiConfiguration.OpalRequest);
+ }
+
+ //
+ // Pass the current configuration to the BIOS
+ //
+ OpalHiiSetBrowserData ();
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Send BlockSid request through TPM physical presence module.
+
+ @param PpRequest TPM physical presence operation request.
+
+ @retval EFI_SUCCESS Do the required action success.
+ @retval Others Other error occur.
+
+**/
+EFI_STATUS
+HiiSetBlockSidAction (
+ IN UINT32 PpRequest
+ )
+{
+ UINT32 ReturnCode;
+ EFI_STATUS Status;
+
+ ReturnCode = Tcg2PhysicalPresenceLibSubmitRequestToPreOSFunction (PpRequest, 0);
+ if (ReturnCode == TCG_PP_SUBMIT_REQUEST_TO_PREOS_SUCCESS) {
+ Status = EFI_SUCCESS;
+ } else if (ReturnCode == TCG_PP_SUBMIT_REQUEST_TO_PREOS_GENERAL_FAILURE) {
+ Status = EFI_OUT_OF_RESOURCES;
+ } else if (ReturnCode == TCG_PP_SUBMIT_REQUEST_TO_PREOS_NOT_IMPLEMENTED) {
+ Status = EFI_UNSUPPORTED;
+ } else {
+ Status = EFI_DEVICE_ERROR;
+ }
+
+ return Status;
+}
+
+/**
+ This function processes the results of changes in configuration.
+
+ @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
+ @param Configuration A null-terminated Unicode string in <ConfigResp>
+ format.
+ @param Progress A pointer to a string filled in with the offset of
+ the most recent '&' before the first failing
+ name/value pair (or the beginning of the string if
+ the failure is in the first name/value pair) or
+ the terminating NULL if all was successful.
+
+ @retval EFI_SUCCESS The Results is processed successfully.
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+ @retval EFI_NOT_FOUND Routing data doesn't match any storage in this
+ driver.
+
+**/
+EFI_STATUS
+EFIAPI
+RouteConfig(
+ CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
+ CONST EFI_STRING Configuration,
+ EFI_STRING *Progress
+ )
+{
+ if (Configuration == NULL || Progress == NULL) {
+ return (EFI_INVALID_PARAMETER);
+ }
+
+ *Progress = Configuration;
+ if (!HiiIsConfigHdrMatch (Configuration, &gHiiSetupVariableGuid, OpalPasswordStorageName)) {
+ return EFI_NOT_FOUND;
+ }
+
+ *Progress = Configuration + StrLen (Configuration);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function allows a caller to extract the current configuration for one
+ or more named elements from the target driver.
+
+ @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
+ @param Request A null-terminated Unicode string in
+ <ConfigRequest> format.
+ @param Progress On return, points to a character in the Request
+ string. Points to the string's null terminator if
+ request was successful. Points to the most recent
+ '&' before the first failing name/value pair (or
+ the beginning of the string if the failure is in
+ the first name/value pair) if the request was not
+ successful.
+ @param Results A null-terminated Unicode string in
+ <ConfigAltResp> format which has all values filled
+ in for the names in the Request string. String to
+ be allocated by the called function.
+
+ @retval EFI_SUCCESS The Results is filled with the requested values.
+ @retval EFI_OUT_OF_RESOURCES Not enough memory to store the results.
+ @retval EFI_INVALID_PARAMETER Request is illegal syntax, or unknown name.
+ @retval EFI_NOT_FOUND Routing data doesn't match any storage in this
+ driver.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtractConfig(
+ CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
+ CONST EFI_STRING Request,
+ EFI_STRING *Progress,
+ EFI_STRING *Results
+ )
+{
+ EFI_STATUS Status;
+ EFI_STRING ConfigRequest;
+ EFI_STRING ConfigRequestHdr;
+ UINTN BufferSize;
+ UINTN Size;
+ BOOLEAN AllocatedRequest;
+ EFI_HANDLE DriverHandle;
+
+ //
+ // Check for valid parameters
+ //
+ if (Progress == NULL || Results == NULL) {
+ return (EFI_INVALID_PARAMETER);
+ }
+
+ *Progress = Request;
+ if ((Request != NULL) &&
+ !HiiIsConfigHdrMatch (Request, &gHiiSetupVariableGuid, OpalPasswordStorageName)) {
+ return EFI_NOT_FOUND;
+ }
+
+ AllocatedRequest = FALSE;
+ BufferSize = sizeof (OPAL_HII_CONFIGURATION);
+ ConfigRequest = Request;
+ if ((Request == NULL) || (StrStr (Request, L"OFFSET") == NULL)) {
+ //
+ // Request has no request element, construct full request string.
+ // Allocate and fill a buffer large enough to hold the <ConfigHdr> template
+ // followed by "&OFFSET=0&WIDTH=WWWWWWWWWWWWWWWW" followed by a Null-terminator
+ //
+ DriverHandle = HiiGetDriverImageHandleCB();
+ ConfigRequestHdr = HiiConstructConfigHdr (&gHiiSetupVariableGuid, OpalPasswordStorageName, DriverHandle);
+ Size = (StrLen (ConfigRequestHdr) + 32 + 1) * sizeof (CHAR16);
+ ConfigRequest = AllocateZeroPool (Size);
+ if (ConfigRequest == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ AllocatedRequest = TRUE;
+ UnicodeSPrint (ConfigRequest, Size, L"%s&OFFSET=0&WIDTH=%016LX", ConfigRequestHdr, (UINT64)BufferSize);
+ FreePool (ConfigRequestHdr);
+ }
+
+ //
+ // Convert Buffer Data to <ConfigResp> by helper function BlockToConfig( )
+ //
+ Status = gHiiConfigRouting->BlockToConfig(
+ gHiiConfigRouting,
+ ConfigRequest,
+ (UINT8*)&gHiiConfiguration,
+ sizeof(OPAL_HII_CONFIGURATION),
+ Results,
+ Progress
+ );
+
+ //
+ // Free the allocated config request string.
+ //
+ if (AllocatedRequest) {
+ FreePool (ConfigRequest);
+ ConfigRequest = NULL;
+ }
+
+ //
+ // Set Progress string to the original request string.
+ //
+ if (Request == NULL) {
+ *Progress = NULL;
+ } else if (StrStr (Request, L"OFFSET") == NULL) {
+ *Progress = Request + StrLen (Request);
+ }
+
+ return (Status);
+}
+
+
+/**
+
+ Pass the current system state to the bios via the hii_G_Configuration.
+
+**/
+VOID
+OpalHiiSetBrowserData (
+ VOID
+ )
+{
+ HiiSetBrowserData(
+ &gHiiSetupVariableGuid,
+ (CHAR16*)L"OpalHiiConfig",
+ sizeof(gHiiConfiguration),
+ (UINT8*)&gHiiConfiguration,
+ NULL
+ );
+}
+
+
+/**
+
+ Populate the hii_g_Configuraton with the browser Data.
+
+**/
+VOID
+OpalHiiGetBrowserData (
+ VOID
+ )
+{
+ HiiGetBrowserData(
+ &gHiiSetupVariableGuid,
+ (CHAR16*)L"OpalHiiConfig",
+ sizeof(gHiiConfiguration),
+ (UINT8*)&gHiiConfiguration
+ );
+}
+
+/**
+ Set a string Value in a form.
+
+ @param DestStringId The stringid which need to update.
+ @param SrcAsciiStr The string nned to update.
+
+ @retval EFI_SUCCESS Do the required action success.
+ @retval Others Other error occur.
+
+**/
+EFI_STATUS
+HiiSetFormString(
+ EFI_STRING_ID DestStringId,
+ CHAR8 *SrcAsciiStr
+ )
+{
+ UINT32 Len;
+ UINT32 UniSize;
+ CHAR16* UniStr;
+
+ //
+ // Determine the Length of the sting
+ //
+ Len = ( UINT32 )AsciiStrLen( SrcAsciiStr );
+
+ //
+ // Allocate space for the unicode string, including terminator
+ //
+ UniSize = (Len + 1) * sizeof(CHAR16);
+ UniStr = (CHAR16*)AllocateZeroPool(UniSize);
+
+ //
+ // Copy into unicode string, then copy into string id
+ //
+ AsciiStrToUnicodeStrS ( SrcAsciiStr, UniStr, Len + 1);
+
+ //
+ // Update the string in the form
+ //
+ if (HiiSetString(gHiiPackageListHandle, DestStringId, UniStr, NULL) == 0) {
+ DEBUG ((DEBUG_INFO, "HiiSetFormString( ) failed\n"));
+ FreePool(UniStr);
+ return (EFI_OUT_OF_RESOURCES);
+ }
+
+ //
+ // Free the memory
+ //
+ FreePool(UniStr);
+
+ return (EFI_SUCCESS);
+}
+
+/**
+ Initialize the Opal disk base on the hardware info get from device.
+
+ @param Dev The Opal device.
+
+ @retval EFI_SUCESS Initialize the device success.
+ @retval EFI_DEVICE_ERROR Get info from device failed.
+
+**/
+EFI_STATUS
+OpalDiskInitialize (
+ IN OPAL_DRIVER_DEVICE *Dev
+ )
+{
+ TCG_RESULT TcgResult;
+ OPAL_SESSION Session;
+
+ ZeroMem(&Dev->OpalDisk, sizeof(OPAL_DISK));
+ Dev->OpalDisk.Sscp = Dev->Sscp;
+ Dev->OpalDisk.MediaId = Dev->MediaId;
+ Dev->OpalDisk.OpalDevicePath = Dev->OpalDevicePath;
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = Dev->Sscp;
+ Session.MediaId = Dev->MediaId;
+
+ TcgResult = OpalGetSupportedAttributesInfo (&Session, &Dev->OpalDisk.SupportedAttributes, &Dev->OpalDisk.OpalBaseComId);
+ if (TcgResult != TcgResultSuccess) {
+ return EFI_DEVICE_ERROR;
+ }
+ Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
+
+ TcgResult = OpalUtilGetMsid (&Session, Dev->OpalDisk.Msid, OPAL_MSID_LENGHT, &Dev->OpalDisk.MsidLength);
+ if (TcgResult != TcgResultSuccess) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return OpalDiskUpdateStatus (&Dev->OpalDisk);
+}
+
+/**
+ Update the device info.
+
+ @param OpalDisk The Opal device.
+
+ @retval EFI_SUCESS Initialize the device success.
+ @retval EFI_DEVICE_ERROR Get info from device failed.
+ @retval EFI_INVALID_PARAMETER Not get Msid info before get ownership info.
+
+**/
+EFI_STATUS
+OpalDiskUpdateStatus (
+ OPAL_DISK *OpalDisk
+ )
+{
+ TCG_RESULT TcgResult;
+ OPAL_SESSION Session;
+
+ ZeroMem(&Session, sizeof(Session));
+ Session.Sscp = OpalDisk->Sscp;
+ Session.MediaId = OpalDisk->MediaId;
+ Session.OpalBaseComId = OpalDisk->OpalBaseComId;
+
+ TcgResult = OpalGetLockingInfo(&Session, &OpalDisk->LockingFeature);
+ if (TcgResult != TcgResultSuccess) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (OpalDisk->MsidLength == 0) {
+ return EFI_INVALID_PARAMETER;
+ } else {
+ //
+ // Base on the Msid info to get the ownership, so Msid info must get first.
+ //
+ OpalDisk->Owner = OpalUtilDetermineOwnership(&Session, OpalDisk->Msid, OpalDisk->MsidLength);
+ }
+
+ return EFI_SUCCESS;
+}
+
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
new file mode 100644
index 000000000000..a1b1131c1380
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
@@ -0,0 +1,380 @@
+/** @file
+ Public Header file of HII library used by Opal UEFI Driver.
+ Defines required callbacks of Opal HII library.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _OPAL_HII_H_
+#define _OPAL_HII_H_
+
+#include <Protocol/HiiConfigAccess.h>
+
+#include "OpalDriver.h"
+#include "OpalHiiFormValues.h"
+
+#define OPAL_PASSWORD_CONFIG_GUID \
+ { \
+ 0x0d510a4f, 0xa81b, 0x473f, { 0x87, 0x07, 0xb7, 0xfd, 0xfb, 0xc0, 0x45, 0xba } \
+ }
+
+#pragma pack(1)
+
+typedef struct {
+ UINT16 Id: HII_KEY_ID_BITS;
+ UINT16 Index: HII_KEY_INDEX_BITS;
+ UINT16 Flag: HII_KEY_FLAG_BITS;
+} KEY_BITS;
+
+typedef union {
+ UINT16 Raw;
+ KEY_BITS KeyBits;
+} HII_KEY;
+
+typedef struct {
+ VENDOR_DEVICE_PATH VendorDevicePath;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} HII_VENDOR_DEVICE_PATH;
+
+#pragma pack()
+
+extern const EFI_GUID gHiiSetupVariableGuid;
+
+/**
+ This function processes the results of changes in configuration.
+
+ @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
+ @param Configuration A null-terminated Unicode string in <ConfigResp>
+ format.
+ @param Progress A pointer to a string filled in with the offset of
+ the most recent '&' before the first failing
+ name/value pair (or the beginning of the string if
+ the failure is in the first name/value pair) or
+ the terminating NULL if all was successful.
+
+ @retval EFI_SUCCESS The Results is processed successfully.
+ @retval EFI_INVALID_PARAMETER Configuration is NULL.
+ @retval EFI_NOT_FOUND Routing data doesn't match any storage in this
+ driver.
+
+**/
+EFI_STATUS
+EFIAPI
+RouteConfig(
+ CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
+ CONST EFI_STRING Configuration,
+ EFI_STRING *Progress
+ );
+
+/**
+ This function allows a caller to extract the current configuration for one
+ or more named elements from the target driver.
+
+ @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
+ @param Request A null-terminated Unicode string in
+ <ConfigRequest> format.
+ @param Progress On return, points to a character in the Request
+ string. Points to the string's null terminator if
+ request was successful. Points to the most recent
+ '&' before the first failing name/value pair (or
+ the beginning of the string if the failure is in
+ the first name/value pair) if the request was not
+ successful.
+ @param Results A null-terminated Unicode string in
+ <ConfigAltResp> format which has all values filled
+ in for the names in the Request string. String to
+ be allocated by the called function.
+
+ @retval EFI_SUCCESS The Results is filled with the requested values.
+ @retval EFI_OUT_OF_RESOURCES Not enough memory to store the results.
+ @retval EFI_INVALID_PARAMETER Request is illegal syntax, or unknown name.
+ @retval EFI_NOT_FOUND Routing data doesn't match any storage in this
+ driver.
+
+**/
+EFI_STATUS
+EFIAPI
+ExtractConfig(
+ CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
+ CONST EFI_STRING Request,
+ EFI_STRING *Progress,
+ EFI_STRING *Results
+ );
+
+/**
+ This function processes the results of changes in configuration.
+
+ @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
+ @param Action Specifies the type of action taken by the browser.
+ @param QuestionId A unique value which is sent to the original
+ exporting driver so that it can identify the type
+ of data to expect.
+ @param Type The type of value for the question.
+ @param Value A pointer to the data being sent to the original
+ exporting driver.
+ @param ActionRequest On return, points to the action requested by the
+ callback function.
+
+ @retval EFI_SUCCESS The callback successfully handled the action.
+ @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the
+ variable and its data.
+ @retval EFI_DEVICE_ERROR The variable could not be saved.
+ @retval EFI_UNSUPPORTED The specified Action is not supported by the
+ callback.
+
+**/
+EFI_STATUS
+EFIAPI
+DriverCallback(
+ CONST EFI_HII_CONFIG_ACCESS_PROTOCOL* This,
+ EFI_BROWSER_ACTION Action,
+ EFI_QUESTION_ID QuestionId,
+ UINT8 Type,
+ EFI_IFR_TYPE_VALUE* Value,
+ EFI_BROWSER_ACTION_REQUEST* ActionRequest
+ );
+
+/**
+
+ Pass the current system state to the bios via the hii_G_Configuration.
+
+**/
+VOID
+OpalHiiSetBrowserData (
+ VOID
+ );
+
+/**
+
+ Populate the hii_g_Configuraton with the browser Data.
+
+**/
+VOID
+OpalHiiGetBrowserData (
+ VOID
+ );
+
+/**
+ Draws the disk info form.
+
+ @retval EFI_SUCCESS Draw the disk info success.
+
+**/
+EFI_STATUS
+HiiPopulateDiskInfoForm(
+ VOID
+ );
+
+/**
+ Update the global Disk index info.
+
+ @param Index The input disk index info.
+
+ @retval EFI_SUCCESS Update the disk index info success.
+
+**/
+EFI_STATUS
+HiiSelectDisk(
+ UINT8 Index
+ );
+
+/**
+ Use the input password to do the specified action.
+
+ @param Str The input password saved in.
+
+ @retval EFI_SUCCESS Do the required action success.
+ @retval Others Other error occur.
+
+**/
+EFI_STATUS
+HiiPasswordEntered(
+ EFI_STRING_ID Str
+ );
+
+/**
+ Update block sid info.
+
+ @param PpRequest Input the Pp Request.
+
+ @retval EFI_SUCCESS Do the required action success.
+ @retval Others Other error occur.
+
+**/
+EFI_STATUS
+HiiSetBlockSidAction (
+ UINT32 PpRequest
+ );
+
+/**
+ Reverts the Opal disk to factory default.
+
+ @param PsidStringId The string id for the PSID info.
+
+ @retval EFI_SUCCESS Do the required action success.
+
+**/
+EFI_STATUS
+HiiPsidRevert(
+ EFI_STRING_ID PsidStringId
+ );
+
+/**
+ Get disk name string id.
+
+ @param DiskIndex The input disk index info.
+
+ @retval The disk name string id.
+
+**/
+EFI_STRING_ID
+GetDiskNameStringId(
+ UINT8 DiskIndex
+ );
+
+/**
+ Update the device info.
+
+ @param OpalDisk The Opal device.
+
+ @retval EFI_SUCESS Initialize the device success.
+ @retval EFI_DEVICE_ERROR Get info from device failed.
+ @retval EFI_INVALID_PARAMETER Not get Msid info before get ownership info.
+
+**/
+EFI_STATUS
+OpalDiskUpdateStatus (
+ OPAL_DISK *OpalDisk
+ );
+
+/**
+ Get the driver image handle.
+
+ @retval the driver image handle.
+
+**/
+EFI_HANDLE
+HiiGetDriverImageHandleCB(
+ VOID
+ );
+
+/**
+ Install the HII form and string packages.
+
+ @retval EFI_SUCCESS Install all the resources success.
+ @retval EFI_OUT_OF_RESOURCES Out of resource error.
+**/
+EFI_STATUS
+OpalHiiAddPackages(
+ VOID
+ );
+
+/**
+ Check whether enable feature or not.
+
+ @retval Return the disk number.
+
+**/
+UINT8
+HiiGetNumConfigRequiredOpalDisksCB(
+ VOID
+ );
+
+/**
+ Returns the driver name.
+
+ @retval Returns the driver name.
+
+**/
+CHAR16*
+HiiGetDriverNameCB(
+ VOID
+ );
+
+/**
+ Returns the opaque pointer to a physical disk context.
+
+ @param DiskIndex Input the disk index.
+
+ @retval The device pointer.
+
+**/
+OPAL_DISK*
+HiiGetOpalDiskCB(
+ UINT8 DiskIndex
+ );
+
+/**
+ Returns the disk name.
+
+ @param DiskIndex Input the disk index.
+
+ @retval Returns the disk name.
+
+**/
+CHAR8*
+HiiDiskGetNameCB(
+ UINT8 DiskIndex
+ );
+
+/**
+ Set a string Value in a form.
+
+ @param DestStringId The stringid which need to update.
+ @param SrcAsciiStr The string nned to update.
+
+ @retval EFI_SUCCESS Do the required action success.
+ @retval Others Other error occur.
+
+**/
+EFI_STATUS
+HiiSetFormString(
+ EFI_STRING_ID DestStringId,
+ CHAR8 *SrcAsciiStr
+ );
+
+/**
+ Install the HII related resources.
+
+ @retval EFI_SUCCESS Install all the resources success.
+ @retval other Error occur when install the resources.
+**/
+EFI_STATUS
+HiiInstall(
+ VOID
+ );
+
+/**
+ Uninstall the HII capability.
+
+ @retval EFI_SUCCESS Uninstall all the resources success.
+ @retval others Other errors occur when unistall the hii resource.
+**/
+EFI_STATUS
+HiiUninstall(
+ VOID
+ );
+
+/**
+ Initialize the Opal disk base on the hardware info get from device.
+
+ @param Dev The Opal device.
+
+ @retval EFI_SUCESS Initialize the device success.
+ @retval EFI_DEVICE_ERROR Get info from device failed.
+
+**/
+EFI_STATUS
+OpalDiskInitialize (
+ IN OPAL_DRIVER_DEVICE *Dev
+ );
+
+#endif // _HII_H_
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
new file mode 100644
index 000000000000..b07e38c1449d
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
@@ -0,0 +1,219 @@
+/** @file
+ Callbacks required by the HII of the Opal UEFI Driver to help display
+ Opal device information.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "OpalHii.h"
+
+/**
+ Get Opal var name.
+ The return Value must be freed by caller if not NULL
+
+ @param OpalDisk The disk.
+ @param Prefix The prefix string.
+
+ @retval The var name string.
+
+**/
+CHAR16*
+OpalDriverGetOpalVarName(
+ OPAL_DISK *OpalDisk,
+ const CHAR16 *Prefix
+ )
+{
+ OPAL_DRIVER_DEVICE* Dev;
+ UINTN PrefixLen;
+ UINTN NameLen;
+ UINTN VarNameLen;
+ CHAR16* VarName;
+
+ Dev = DRIVER_DEVICE_FROM_OPALDISK(OpalDisk);
+ if (Dev == NULL) {
+ return NULL;
+ }
+
+ PrefixLen = StrLen(Prefix);
+
+ NameLen = 0;
+ if (Dev->Name16 != NULL) {
+ NameLen = StrLen(Dev->Name16);
+ }
+
+ VarNameLen = PrefixLen + NameLen;
+
+ VarName = (CHAR16*)AllocateZeroPool((VarNameLen + 1) * sizeof(CHAR16));
+ if (VarName == NULL) {
+ return NULL;
+ }
+
+ CopyMem(VarName, Prefix, PrefixLen * sizeof(CHAR16));
+ if (Dev->Name16 != NULL) {
+ CopyMem(VarName + PrefixLen, Dev->Name16, NameLen * sizeof(CHAR16));
+ }
+ VarName[VarNameLen] = 0;
+
+ return VarName;
+}
+
+/**
+ Get the driver image handle.
+
+ @retval the driver image handle.
+
+**/
+EFI_HANDLE
+HiiGetDriverImageHandleCB(
+ VOID
+ )
+{
+ return gImageHandle;
+}
+
+/**
+ Check whether enable feature or not.
+
+ @retval Return the disk number.
+
+**/
+UINT8
+HiiGetNumConfigRequiredOpalDisksCB(
+ VOID
+ )
+{
+ UINT8 NumDisks;
+ UINT8 NumLockedOpalDisks;
+ OPAL_DISK *OpalDisk;
+ UINT8 Index;
+
+ NumLockedOpalDisks = 0;
+
+ NumDisks = GetDeviceCount();
+
+ for (Index = 0; Index < NumDisks; Index++) {
+ OpalDisk = HiiGetOpalDiskCB(Index);
+
+ if (OpalDisk != NULL) {
+ if (!OpalFeatureEnabled (&OpalDisk->SupportedAttributes, &OpalDisk->LockingFeature)) {
+ DEBUG ((DEBUG_INFO, "Ignoring disk %u because feature is disabled or health has already been inspected\n", Index));
+ } else if (OpalDeviceLocked (&OpalDisk->SupportedAttributes, &OpalDisk->LockingFeature)) {
+ NumLockedOpalDisks++;
+ }
+ }
+ }
+
+ return NumLockedOpalDisks;
+}
+
+
+
+/**
+ Returns the opaque pointer to a physical disk context.
+
+ @param DiskIndex Input the disk index.
+
+ @retval The device pointer.
+
+**/
+VOID *
+HiiGetDiskContextCB(
+ UINT8 DiskIndex
+ )
+{
+ OPAL_DRIVER_DEVICE* Dev;
+ UINT8 CurrentDisk;
+
+ Dev = OpalDriverGetDeviceList();
+ CurrentDisk = 0;
+
+ if (DiskIndex >= GetDeviceCount()) {
+ return NULL;
+ }
+
+ while (Dev != NULL) {
+ if (CurrentDisk == DiskIndex) {
+ return Dev;
+ } else {
+ Dev = Dev->Next;
+ CurrentDisk++;
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ Returns the opaque pointer to a physical disk context.
+
+ @param DiskIndex Input the disk index.
+
+ @retval The device pointer.
+
+**/
+OPAL_DISK*
+HiiGetOpalDiskCB(
+ UINT8 DiskIndex
+ )
+{
+ VOID *Ctx;
+ OPAL_DRIVER_DEVICE *Tmp;
+
+ Ctx = HiiGetDiskContextCB (DiskIndex);
+
+ if (Ctx == NULL) {
+ return NULL;
+ }
+
+ Tmp = (OPAL_DRIVER_DEVICE*) Ctx;
+
+ return &Tmp->OpalDisk;
+}
+
+/**
+ Returns the disk name.
+
+ @param DiskIndex Input the disk index.
+
+ @retval Returns the disk name.
+
+**/
+CHAR8*
+HiiDiskGetNameCB(
+ UINT8 DiskIndex
+ )
+{
+ OPAL_DRIVER_DEVICE* Ctx;
+
+ Ctx = (OPAL_DRIVER_DEVICE*) HiiGetDiskContextCB (DiskIndex);
+
+ if (Ctx != NULL) {
+ if (Ctx->NameZ == NULL) {
+ OpalDriverGetDriverDeviceName (Ctx);
+ }
+ return Ctx->NameZ;
+ }
+ return NULL;
+}
+
+/**
+ Returns the driver name.
+
+ @retval Returns the driver name.
+
+**/
+CHAR16*
+HiiGetDriverNameCB(
+ VOID
+ )
+{
+ return (CHAR16*)EFI_DRIVER_NAME_UNICODE;
+}
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
new file mode 100644
index 000000000000..69abc561cc56
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
@@ -0,0 +1,84 @@
+// /** @file
+//
+// String definitions for Setup formset.
+//
+// Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+//
+// This program and the accompanying materials
+// are licensed and made available under the terms and conditions of the BSD License
+// which accompanies this distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php
+//
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+// **/
+
+/=#
+///////////////////////////////// GENERIC DEFINITIONS /////////////////////////////////
+#langdef en-US "English"
+#string STR_NULL #language en-US " "
+
+///////////////////////////////// FORM SET /////////////////////////////////
+#string STR_FORM_SET_HELP #language en-US "Manage Opal disks"
+
+///////////////////////////////// MULTIPLE FORMS /////////////////////////////////
+#string STR_OPAL #language en-US "Opal"
+#string STR_MAIN_OPAL_VERSION #language en-US "Version 00.0.0.0000"
+
+///////////////////////////////// MAIN MENU FORM /////////////////////////////////
+#string STR_MAIN_PHY_DISKS_LBL #language en-US "Physical Disks:"
+
+#string STR_MAIN_GOTO_DISK_INFO_0 #language en-US " "
+#string STR_MAIN_GOTO_DISK_INFO_1 #language en-US " "
+#string STR_MAIN_GOTO_DISK_INFO_2 #language en-US " "
+#string STR_MAIN_GOTO_DISK_INFO_3 #language en-US " "
+#string STR_MAIN_GOTO_DISK_INFO_4 #language en-US " "
+#string STR_MAIN_GOTO_DISK_INFO_5 #language en-US " "
+
+#string STR_MAIN_GOTO_DISK_INFO_HELP #language en-US "Select to see Opal disk actions"
+
+#string STR_MAIN_NO_DISKS_PRESENT_LBL #language en-US "No disks connected to system"
+
+///////////////////////////////// DISK INFO MENU FORM /////////////////////////////////
+#string STR_DISK_INFO_SELECTED_DISK_NAME #language en-US " "
+
+#string STR_DISK_INFO_LOCK #language en-US "Lock"
+#string STR_DISK_INFO_UNLOCK #language en-US "Unlock"
+#string STR_DISK_INFO_SET_ADMIN_PSWD #language en-US "Update Drive Admin Password"
+#string STR_DISK_INFO_SET_USER_PSWD #language en-US "Set Drive User Password"
+#string STR_DISK_INFO_SECURE_ERASE #language en-US "Secure Erase User Data"
+#string STR_DISK_INFO_PSID_REVERT #language en-US "PSID Revert to factory default"
+#string STR_DISK_INFO_REVERT #language en-US "Admin Revert to factory default and Disable"
+#string STR_DISK_INFO_DISABLE_USER #language en-US "Disable User"
+#string STR_DISK_INFO_ENABLE_FEATURE #language en-US "Enable Feature"
+#string STR_DISK_INFO_ENABLE_BLOCKSID #language en-US "TCG Storage Action"
+#string STR_ENABLED #language en-US "Enable BlockSID"
+#string STR_DISABLED #language en-US "Disable BlockSID"
+
+#string STR_NONE #language en-US "None"
+#string STR_DISK_INFO_ENABLE_BLOCKSID_TRUE #language en-US "Require physical presence when remote enable BlockSID"
+#string STR_DISK_INFO_ENABLE_BLOCKSID_FALSE #language en-US "Not require physical presence when remote enable BlockSID"
+#string STR_DISK_INFO_DISABLE_BLOCKSID_TRUE #language en-US "Require physical presence when remote disable BlockSID"
+#string STR_DISK_INFO_DISABLE_BLOCKSID_FALSE #language en-US "Not require physical presence when remote disable BlockSID"
+
+#string STR_BLOCKSID_STATUS_HELP #language en-US "BlockSID action change status"
+#string STR_BLOCKSID_STATUS #language en-US "Current BlockSID Status:"
+#string STR_BLOCKSID_STATUS1 #language en-US ""
+#string STR_BLOCKSID_STATUS2 #language en-US ""
+#string STR_BLOCKSID_STATUS3 #language en-US ""
+
+#string STR_OPAL_REQUESTS_LBL #language en-US "Opal Requests:"
+#string STR_DISK_INFO_LOCK_HELP #language en-US "Lock the disk"
+#string STR_DISK_INFO_UNLOCK_HELP #language en-US "Unlock the disk"
+#string STR_DISK_INFO_SET_ADMIN_PSWD_HELP #language en-US "Set password for the administrator"
+#string STR_DISK_INFO_SET_USER_PSWD_HELP #language en-US "Set password for User 1"
+#string STR_DISK_INFO_SECURE_ERASE_HELP #language en-US "Securely erase the disk"
+#string STR_DISK_INFO_REVERT_HELP #language en-US "Revert the disk to factory defaults"
+#string STR_DISK_INFO_PSID_REVERT_HELP #language en-US "Revert the disk to factory defaults, PSID is a 32 character case sensitive value"
+#string STR_DISK_INFO_DISABLE_USER_HELP #language en-US "Disable User"
+#string STR_DISK_INFO_ENABLE_FEATURE_HELP #language en-US "Enable Feature"
+#string STR_KEEP_USER_DATA_PROMPT #language en-US " Keep User Data"
+#string STR_KEEP_USER_DATA_HELP #language en-US "Check to keep user data, otherwise data will be lost"
+
+#string STR_DISK_INFO_ENABLE_BLOCKSID_HELP #language en-US "Change BlockSID actions, includes enable or disable BlockSID, Require or not require physical presence when remote enable or disable BlockSID"
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
new file mode 100644
index 000000000000..3ff7d4726d5e
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
@@ -0,0 +1,123 @@
+/** @file
+ Defines Opal HII form ids, structures and values.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#ifndef _OPAL_HII_FORM_VALUES_H_
+#define _OPAL_HII_FORM_VALUES_H_
+
+// ID's for various forms that will be used by HII
+#define FORMID_VALUE_MAIN_MENU 0x01
+#define FORMID_VALUE_DISK_INFO_FORM_MAIN 0x02
+
+#define OPAL_REQUEST_VARIABLE_NAME L"OpalRequest"
+
+#pragma pack(1)
+typedef struct {
+ UINT16 Lock:1;
+ UINT16 Unlock:1;
+ UINT16 SetAdminPwd:1;
+ UINT16 SetUserPwd:1;
+ UINT16 SecureErase:1;
+ UINT16 Revert:1;
+ UINT16 PsidRevert:1;
+ UINT16 DisableUser:1;
+ UINT16 DisableFeature:1;
+ UINT16 EnableFeature:1;
+ UINT16 Reserved:5;
+ UINT16 KeepUserData:1;
+} OPAL_REQUEST;
+
+typedef struct {
+ UINT8 NumDisks;
+ UINT8 SelectedDiskIndex;
+ UINT16 SelectedDiskAvailableActions;
+ UINT16 SupportedDisks;
+ BOOLEAN KeepUserDataForced;
+ OPAL_REQUEST OpalRequest;
+ UINT8 EnableBlockSid;
+} OPAL_HII_CONFIGURATION;
+
+typedef struct {
+ UINT32 Length;
+ OPAL_REQUEST OpalRequest;
+ //EFI_DEVICE_PATH_PROTOCOL OpalDevicePath;
+} OPAL_REQUEST_VARIABLE;
+
+#pragma pack()
+
+/* Action Flags */
+#define HII_ACTION_NONE 0x0000
+#define HII_ACTION_LOCK 0x0001
+#define HII_ACTION_UNLOCK 0x0002
+#define HII_ACTION_SET_ADMIN_PWD 0x0004
+#define HII_ACTION_SET_USER_PWD 0x0008
+#define HII_ACTION_SECURE_ERASE 0x0010
+#define HII_ACTION_REVERT 0x0020
+#define HII_ACTION_PSID_REVERT 0x0040
+#define HII_ACTION_DISABLE_USER 0x0080
+#define HII_ACTION_DISABLE_FEATURE 0x0100
+#define HII_ACTION_ENABLE_FEATURE 0x0200
+
+/* Number of bits allocated for each part of a unique key for an HII_ITEM
+ * all bits together must be <= 16 (EFI_QUESTION_ID is UINT16)
+ * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
+ * | |-----------------------| |---------------------------|
+ * FLG INDEX ID
+ */
+#define HII_KEY_ID_BITS 8
+#define HII_KEY_INDEX_BITS 7
+#define HII_KEY_FLAG_BITS 1
+
+#define HII_KEY_FLAG 0x8000 // bit 15 (zero based)
+
+/***********/
+/* Key IDs */
+/***********/
+
+#define HII_KEY_ID_GOTO_DISK_INFO 1
+
+#define HII_KEY_ID_VAR_SUPPORTED_DISKS 2
+#define HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS 3
+
+#define HII_KEY_ID_BLOCKSID 4
+#define HII_KEY_ID_SET_ADMIN_PWD 5
+#define HII_KEY_ID_SET_USER_PWD 6
+#define HII_KEY_ID_SECURE_ERASE 7
+#define HII_KEY_ID_REVERT 8
+#define HII_KEY_ID_KEEP_USER_DATA 9
+#define HII_KEY_ID_PSID_REVERT 0xA
+#define HII_KEY_ID_DISABLE_USER 0xB
+#define HII_KEY_ID_ENABLE_FEATURE 0xC
+
+#define HII_KEY_ID_MAX 0xC // !!Update each time a new ID is added!!
+
+#define HII_KEY_WITH_INDEX(id, index) \
+ ( \
+ HII_KEY_FLAG | \
+ (id) | \
+ ((index) << HII_KEY_ID_BITS) \
+ )
+
+#define HII_KEY(id) HII_KEY_WITH_INDEX(id, 0)
+
+#define PACKAGE_LIST_GUID { 0xf0308176, 0x9058, 0x4153, { 0x93, 0x3d, 0xda, 0x2f, 0xdc, 0xc8, 0x3e, 0x44 } }
+
+/* {410483CF-F4F9-4ece-848A-1958FD31CEB7} */
+#define SETUP_FORMSET_GUID { 0x410483cf, 0xf4f9, 0x4ece, { 0x84, 0x8a, 0x19, 0x58, 0xfd, 0x31, 0xce, 0xb7 } }
+
+// {BBF1ACD2-28D8-44ea-A291-58A237FEDF1A}
+#define SETUP_VARIABLE_GUID { 0xbbf1acd2, 0x28d8, 0x44ea, { 0xa2, 0x91, 0x58, 0xa2, 0x37, 0xfe, 0xdf, 0x1a } }
+
+#endif //_HII_FORM_VALUES_H_
+
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
new file mode 100644
index 000000000000..7657bb26e23c
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
@@ -0,0 +1,2144 @@
+/** @file
+ Provide functions to initialize NVME controller and perform NVME commands
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "OpalPasswordPei.h"
+
+
+#define ALIGN(v, a) (UINTN)((((v) - 1) | ((a) - 1)) + 1)
+
+///
+/// NVME Host controller registers operation
+///
+#define NVME_GET_CAP(Nvme, Cap) NvmeMmioRead (Cap, Nvme->Nbar + NVME_CAP_OFFSET, sizeof (NVME_CAP))
+#define NVME_GET_CC(Nvme, Cc) NvmeMmioRead (Cc, Nvme->Nbar + NVME_CC_OFFSET, sizeof (NVME_CC))
+#define NVME_SET_CC(Nvme, Cc) NvmeMmioWrite (Nvme->Nbar + NVME_CC_OFFSET, Cc, sizeof (NVME_CC))
+#define NVME_GET_CSTS(Nvme, Csts) NvmeMmioRead (Csts, Nvme->Nbar + NVME_CSTS_OFFSET, sizeof (NVME_CSTS))
+#define NVME_GET_AQA(Nvme, Aqa) NvmeMmioRead (Aqa, Nvme->Nbar + NVME_AQA_OFFSET, sizeof (NVME_AQA))
+#define NVME_SET_AQA(Nvme, Aqa) NvmeMmioWrite (Nvme->Nbar + NVME_AQA_OFFSET, Aqa, sizeof (NVME_AQA))
+#define NVME_GET_ASQ(Nvme, Asq) NvmeMmioRead (Asq, Nvme->Nbar + NVME_ASQ_OFFSET, sizeof (NVME_ASQ))
+#define NVME_SET_ASQ(Nvme, Asq) NvmeMmioWrite (Nvme->Nbar + NVME_ASQ_OFFSET, Asq, sizeof (NVME_ASQ))
+#define NVME_GET_ACQ(Nvme, Acq) NvmeMmioRead (Acq, Nvme->Nbar + NVME_ACQ_OFFSET, sizeof (NVME_ACQ))
+#define NVME_SET_ACQ(Nvme, Acq) NvmeMmioWrite (Nvme->Nbar + NVME_ACQ_OFFSET, Acq, sizeof (NVME_ACQ))
+#define NVME_GET_VER(Nvme, Ver) NvmeMmioRead (Ver, Nvme->Nbar + NVME_VER_OFFSET, sizeof (NVME_VER))
+#define NVME_SET_SQTDBL(Nvme, Qid, Sqtdbl) NvmeMmioWrite (Nvme->Nbar + NVME_SQTDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Sqtdbl, sizeof (NVME_SQTDBL))
+#define NVME_SET_CQHDBL(Nvme, Qid, Cqhdbl) NvmeMmioWrite (Nvme->Nbar + NVME_CQHDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Cqhdbl, sizeof (NVME_CQHDBL))
+
+///
+/// Base memory address
+///
+enum {
+ BASEMEM_CONTROLLER_DATA,
+ BASEMEM_IDENTIFY_DATA,
+ BASEMEM_ASQ,
+ BASEMEM_ACQ,
+ BASEMEM_SQ,
+ BASEMEM_CQ,
+ BASEMEM_PRP,
+ BASEMEM_SECURITY,
+ MAX_BASEMEM_COUNT
+};
+
+///
+/// All of base memories are 4K(0x1000) alignment
+///
+#define NVME_MEM_BASE(Nvme) ((UINTN)(Nvme->BaseMem))
+#define NVME_CONTROL_DATA_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_CONTROLLER_DATA)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
+#define NVME_NAMESPACE_DATA_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_IDENTIFY_DATA)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
+#define NVME_ASQ_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ASQ)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
+#define NVME_ACQ_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ACQ)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
+#define NVME_SQ_BASE(Nvme, index) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SQ) + ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
+#define NVME_CQ_BASE(Nvme, index) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_CQ) + ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
+#define NVME_PRP_BASE(Nvme, index) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_PRP) + ((index)*NVME_PRP_SIZE)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
+#define NVME_SEC_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SECURITY)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
+
+/**
+ Transfer MMIO Data to memory.
+
+ @param[in,out] MemBuffer - Destination: Memory address
+ @param[in] MmioAddr - Source: MMIO address
+ @param[in] Size - Size for read
+
+ @retval EFI_SUCCESS - MMIO read sucessfully
+**/
+EFI_STATUS
+NvmeMmioRead (
+ IN OUT VOID *MemBuffer,
+ IN UINTN MmioAddr,
+ IN UINTN Size
+ )
+{
+ UINTN Offset;
+ UINT8 Data;
+ UINT8 *Ptr;
+
+ // priority has adjusted
+ switch (Size) {
+ case 4:
+ *((UINT32 *)MemBuffer) = MmioRead32 (MmioAddr);
+ break;
+
+ case 8:
+ *((UINT64 *)MemBuffer) = MmioRead64 (MmioAddr);
+ break;
+
+ case 2:
+ *((UINT16 *)MemBuffer) = MmioRead16 (MmioAddr);
+ break;
+
+ case 1:
+ *((UINT8 *)MemBuffer) = MmioRead8 (MmioAddr);
+ break;
+
+ default:
+ Ptr = (UINT8 *)MemBuffer;
+ for (Offset = 0; Offset < Size; Offset += 1) {
+ Data = MmioRead8 (MmioAddr + Offset);
+ Ptr[Offset] = Data;
+ }
+ break;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Transfer memory data to MMIO.
+
+ @param[in,out] MmioAddr - Destination: MMIO address
+ @param[in] MemBuffer - Source: Memory address
+ @param[in] Size - Size for write
+
+ @retval EFI_SUCCESS - MMIO write sucessfully
+**/
+EFI_STATUS
+NvmeMmioWrite (
+ IN OUT UINTN MmioAddr,
+ IN VOID *MemBuffer,
+ IN UINTN Size
+ )
+{
+ UINTN Offset;
+ UINT8 Data;
+ UINT8 *Ptr;
+
+ // priority has adjusted
+ switch (Size) {
+ case 4:
+ MmioWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
+ break;
+
+ case 8:
+ MmioWrite64 (MmioAddr, *((UINT64 *)MemBuffer));
+ break;
+
+ case 2:
+ MmioWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
+ break;
+
+ case 1:
+ MmioWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
+ break;
+
+ default:
+ Ptr = (UINT8 *)MemBuffer;
+ for (Offset = 0; Offset < Size; Offset += 1) {
+ Data = Ptr[Offset];
+ MmioWrite8 (MmioAddr + Offset, Data);
+ }
+ break;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Transfer MMIO data to memory.
+
+ @param[in,out] MemBuffer - Destination: Memory address
+ @param[in] MmioAddr - Source: MMIO address
+ @param[in] Size - Size for read
+
+ @retval EFI_SUCCESS - MMIO read sucessfully
+**/
+EFI_STATUS
+OpalPciRead (
+ IN OUT VOID *MemBuffer,
+ IN UINTN MmioAddr,
+ IN UINTN Size
+ )
+{
+ UINTN Offset;
+ UINT8 Data;
+ UINT8 *Ptr;
+
+ // priority has adjusted
+ switch (Size) {
+ case 4:
+ *((UINT32 *)MemBuffer) = PciRead32 (MmioAddr);
+ break;
+
+ case 2:
+ *((UINT16 *)MemBuffer) = PciRead16 (MmioAddr);
+ break;
+
+ case 1:
+ *((UINT8 *)MemBuffer) = PciRead8 (MmioAddr);
+ break;
+
+ default:
+ Ptr = (UINT8 *)MemBuffer;
+ for (Offset = 0; Offset < Size; Offset += 1) {
+ Data = PciRead8 (MmioAddr + Offset);
+ Ptr[Offset] = Data;
+ }
+ break;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Transfer memory data to MMIO.
+
+ @param[in,out] MmioAddr - Destination: MMIO address
+ @param[in] MemBuffer - Source: Memory address
+ @param[in] Size - Size for write
+
+ @retval EFI_SUCCESS - MMIO write sucessfully
+**/
+EFI_STATUS
+OpalPciWrite (
+ IN OUT UINTN MmioAddr,
+ IN VOID *MemBuffer,
+ IN UINTN Size
+ )
+{
+ UINTN Offset;
+ UINT8 Data;
+ UINT8 *Ptr;
+
+ // priority has adjusted
+ switch (Size) {
+ case 4:
+ PciWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
+ break;
+
+ case 2:
+ PciWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
+ break;
+
+ case 1:
+ PciWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
+ break;
+
+ default:
+ Ptr = (UINT8 *)MemBuffer;
+ for (Offset = 0; Offset < Size; Offset += 1) {
+ Data = Ptr[Offset];
+ PciWrite8 (MmioAddr + Offset, Data);
+ }
+ break;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Get total pages for specific NVME based memory.
+
+ @param[in] BaseMemIndex - The Index of BaseMem (0-based).
+
+ @retval - The page count for specific BaseMem Index
+
+**/
+UINT32
+NvmeGetBaseMemPages (
+ IN UINTN BaseMemIndex
+ )
+{
+ UINT32 Pages;
+ UINTN Index;
+ UINT32 PageSizeList[8];
+
+ PageSizeList[0] = 1; /* Controller Data */
+ PageSizeList[1] = 1; /* Identify Data */
+ PageSizeList[2] = 1; /* ASQ */
+ PageSizeList[3] = 1; /* ACQ */
+ PageSizeList[4] = 1; /* SQs */
+ PageSizeList[5] = 1; /* CQs */
+ PageSizeList[6] = NVME_PRP_SIZE * NVME_CSQ_DEPTH; /* PRPs */
+ PageSizeList[7] = 1; /* Security Commands */
+
+ if (BaseMemIndex > MAX_BASEMEM_COUNT) {
+ ASSERT (FALSE);
+ return 0;
+ }
+
+ Pages = 0;
+ for (Index = 0; Index < BaseMemIndex; Index++) {
+ Pages += PageSizeList[Index];
+ }
+
+ return Pages;
+}
+
+/**
+ Wait for NVME controller status to be ready or not.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] WaitReady - Flag for waitting status ready or not
+
+ @return EFI_SUCCESS - Successfully to wait specific status.
+ @return others - Fail to wait for specific controller status.
+
+**/
+STATIC
+EFI_STATUS
+NvmeWaitController (
+ IN NVME_CONTEXT *Nvme,
+ IN BOOLEAN WaitReady
+ )
+{
+ NVME_CSTS Csts;
+ EFI_STATUS Status;
+ UINT32 Index;
+ UINT8 Timeout;
+
+ //
+ // Cap.To specifies max delay time in 500ms increments for Csts.Rdy to set after
+ // Cc.Enable. Loop produces a 1 millisecond delay per itteration, up to 500 * Cap.To.
+ //
+ if (Nvme->Cap.To == 0) {
+ Timeout = 1;
+ } else {
+ Timeout = Nvme->Cap.To;
+ }
+
+ Status = EFI_SUCCESS;
+ for(Index = (Timeout * 500); Index != 0; --Index) {
+ MicroSecondDelay (1000);
+
+ //
+ // Check if the controller is initialized
+ //
+ Status = NVME_GET_CSTS (Nvme, &Csts);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n", Status));
+ return Status;
+ }
+
+ if ((BOOLEAN) Csts.Rdy == WaitReady) {
+ break;
+ }
+ }
+
+ if (Index == 0) {
+ Status = EFI_TIMEOUT;
+ }
+
+ return Status;
+}
+
+/**
+ Disable the Nvm Express controller.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @return EFI_SUCCESS - Successfully disable the controller.
+ @return others - Fail to disable the controller.
+
+**/
+STATIC
+EFI_STATUS
+NvmeDisableController (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ NVME_CC Cc;
+ NVME_CSTS Csts;
+ EFI_STATUS Status;
+
+ Status = NVME_GET_CSTS (Nvme, &Csts);
+
+ ///
+ /// Read Controller Configuration Register.
+ ///
+ Status = NVME_GET_CC (Nvme, &Cc);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
+ goto Done;
+ }
+
+ if (Cc.En == 1) {
+ Cc.En = 0;
+ ///
+ /// Disable the controller.
+ ///
+ Status = NVME_SET_CC (Nvme, &Cc);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
+ goto Done;
+ }
+ }
+
+ Status = NvmeWaitController (Nvme, FALSE);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n", Status));
+ goto Done;
+ }
+
+ return EFI_SUCCESS;
+
+Done:
+ DEBUG ((DEBUG_INFO, "NvmeDisableController fail, Status: %r\n", Status));
+ return Status;
+}
+
+/**
+ Enable the Nvm Express controller.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @return EFI_SUCCESS - Successfully enable the controller.
+ @return EFI_DEVICE_ERROR - Fail to enable the controller.
+ @return EFI_TIMEOUT - Fail to enable the controller in given time slot.
+
+**/
+STATIC
+EFI_STATUS
+NvmeEnableController (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ NVME_CC Cc;
+ EFI_STATUS Status;
+
+ //
+ // Enable the controller
+ //
+ ZeroMem (&Cc, sizeof (NVME_CC));
+ Cc.En = 1;
+ Cc.Iosqes = 6;
+ Cc.Iocqes = 4;
+ Status = NVME_SET_CC (Nvme, &Cc);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
+ goto Done;
+ }
+
+ Status = NvmeWaitController (Nvme, TRUE);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n", Status));
+ goto Done;
+ }
+
+ return EFI_SUCCESS;
+
+Done:
+ DEBUG ((DEBUG_INFO, "NvmeEnableController fail, Status: %r\n", Status));
+ return Status;
+}
+
+/**
+ Shutdown the Nvm Express controller.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @return EFI_SUCCESS - Successfully shutdown the controller.
+ @return EFI_DEVICE_ERROR - Fail to shutdown the controller.
+ @return EFI_TIMEOUT - Fail to shutdown the controller in given time slot.
+
+**/
+STATIC
+EFI_STATUS
+NvmeShutdownController (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ NVME_CC Cc;
+ NVME_CSTS Csts;
+ EFI_STATUS Status;
+ UINT32 Index;
+ UINTN Timeout;
+
+ Status = NVME_GET_CC (Nvme, &Cc);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
+ return Status;
+ }
+
+ Cc.Shn = 1; // Normal shutdown
+
+ Status = NVME_SET_CC (Nvme, &Cc);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
+ return Status;
+ }
+
+ Timeout = NVME_GENERIC_TIMEOUT/1000; // ms
+ for(Index = (UINT32)(Timeout); Index != 0; --Index) {
+ MicroSecondDelay (1000);
+
+ Status = NVME_GET_CSTS (Nvme, &Csts);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n", Status));
+ return Status;
+ }
+
+ if (Csts.Shst == 2) { // Shutdown processing complete
+ break;
+ }
+ }
+
+ if (Index == 0) {
+ Status = EFI_TIMEOUT;
+ }
+
+ return Status;
+}
+
+/**
+ Check the execution status from a given completion queue entry.
+
+ @param[in] Cq - A pointer to the NVME_CQ item.
+
+**/
+EFI_STATUS
+NvmeCheckCqStatus (
+ IN NVME_CQ *Cq
+ )
+{
+ if (Cq->Sct == 0x0 && Cq->Sc == 0x0) {
+ return EFI_SUCCESS;
+ }
+
+ DEBUG ((DEBUG_INFO, "Dump NVMe Completion Entry Status from [0x%x]:\n", (UINTN)Cq));
+ DEBUG ((DEBUG_INFO, " SQ Identifier : [0x%x], Phase Tag : [%d], Cmd Identifier : [0x%x]\n", Cq->Sqid, Cq->Pt, Cq->Cid));
+ DEBUG ((DEBUG_INFO, " NVMe Cmd Execution Result - "));
+
+ switch (Cq->Sct) {
+ case 0x0:
+ switch (Cq->Sc) {
+ case 0x0:
+ DEBUG ((DEBUG_INFO, "Successful Completion\n"));
+ return EFI_SUCCESS;
+ case 0x1:
+ DEBUG ((DEBUG_INFO, "Invalid Command Opcode\n"));
+ break;
+ case 0x2:
+ DEBUG ((DEBUG_INFO, "Invalid Field in Command\n"));
+ break;
+ case 0x3:
+ DEBUG ((DEBUG_INFO, "Command ID Conflict\n"));
+ break;
+ case 0x4:
+ DEBUG ((DEBUG_INFO, "Data Transfer Error\n"));
+ break;
+ case 0x5:
+ DEBUG ((DEBUG_INFO, "Commands Aborted due to Power Loss Notification\n"));
+ break;
+ case 0x6:
+ DEBUG ((DEBUG_INFO, "Internal Device Error\n"));
+ break;
+ case 0x7:
+ DEBUG ((DEBUG_INFO, "Command Abort Requested\n"));
+ break;
+ case 0x8:
+ DEBUG ((DEBUG_INFO, "Command Aborted due to SQ Deletion\n"));
+ break;
+ case 0x9:
+ DEBUG ((DEBUG_INFO, "Command Aborted due to Failed Fused Command\n"));
+ break;
+ case 0xA:
+ DEBUG ((DEBUG_INFO, "Command Aborted due to Missing Fused Command\n"));
+ break;
+ case 0xB:
+ DEBUG ((DEBUG_INFO, "Invalid Namespace or Format\n"));
+ break;
+ case 0xC:
+ DEBUG ((DEBUG_INFO, "Command Sequence Error\n"));
+ break;
+ case 0xD:
+ DEBUG ((DEBUG_INFO, "Invalid SGL Last Segment Descriptor\n"));
+ break;
+ case 0xE:
+ DEBUG ((DEBUG_INFO, "Invalid Number of SGL Descriptors\n"));
+ break;
+ case 0xF:
+ DEBUG ((DEBUG_INFO, "Data SGL Length Invalid\n"));
+ break;
+ case 0x10:
+ DEBUG ((DEBUG_INFO, "Metadata SGL Length Invalid\n"));
+ break;
+ case 0x11:
+ DEBUG ((DEBUG_INFO, "SGL Descriptor Type Invalid\n"));
+ break;
+ case 0x80:
+ DEBUG ((DEBUG_INFO, "LBA Out of Range\n"));
+ break;
+ case 0x81:
+ DEBUG ((DEBUG_INFO, "Capacity Exceeded\n"));
+ break;
+ case 0x82:
+ DEBUG ((DEBUG_INFO, "Namespace Not Ready\n"));
+ break;
+ case 0x83:
+ DEBUG ((DEBUG_INFO, "Reservation Conflict\n"));
+ break;
+ }
+ break;
+
+ case 0x1:
+ switch (Cq->Sc) {
+ case 0x0:
+ DEBUG ((DEBUG_INFO, "Completion Queue Invalid\n"));
+ break;
+ case 0x1:
+ DEBUG ((DEBUG_INFO, "Invalid Queue Identifier\n"));
+ break;
+ case 0x2:
+ DEBUG ((DEBUG_INFO, "Maximum Queue Size Exceeded\n"));
+ break;
+ case 0x3:
+ DEBUG ((DEBUG_INFO, "Abort Command Limit Exceeded\n"));
+ break;
+ case 0x5:
+ DEBUG ((DEBUG_INFO, "Asynchronous Event Request Limit Exceeded\n"));
+ break;
+ case 0x6:
+ DEBUG ((DEBUG_INFO, "Invalid Firmware Slot\n"));
+ break;
+ case 0x7:
+ DEBUG ((DEBUG_INFO, "Invalid Firmware Image\n"));
+ break;
+ case 0x8:
+ DEBUG ((DEBUG_INFO, "Invalid Interrupt Vector\n"));
+ break;
+ case 0x9:
+ DEBUG ((DEBUG_INFO, "Invalid Log Page\n"));
+ break;
+ case 0xA:
+ DEBUG ((DEBUG_INFO, "Invalid Format\n"));
+ break;
+ case 0xB:
+ DEBUG ((DEBUG_INFO, "Firmware Application Requires Conventional Reset\n"));
+ break;
+ case 0xC:
+ DEBUG ((DEBUG_INFO, "Invalid Queue Deletion\n"));
+ break;
+ case 0xD:
+ DEBUG ((DEBUG_INFO, "Feature Identifier Not Saveable\n"));
+ break;
+ case 0xE:
+ DEBUG ((DEBUG_INFO, "Feature Not Changeable\n"));
+ break;
+ case 0xF:
+ DEBUG ((DEBUG_INFO, "Feature Not Namespace Specific\n"));
+ break;
+ case 0x10:
+ DEBUG ((DEBUG_INFO, "Firmware Application Requires NVM Subsystem Reset\n"));
+ break;
+ case 0x80:
+ DEBUG ((DEBUG_INFO, "Conflicting Attributes\n"));
+ break;
+ case 0x81:
+ DEBUG ((DEBUG_INFO, "Invalid Protection Information\n"));
+ break;
+ case 0x82:
+ DEBUG ((DEBUG_INFO, "Attempted Write to Read Only Range\n"));
+ break;
+ }
+ break;
+
+ case 0x2:
+ switch (Cq->Sc) {
+ case 0x80:
+ DEBUG ((DEBUG_INFO, "Write Fault\n"));
+ break;
+ case 0x81:
+ DEBUG ((DEBUG_INFO, "Unrecovered Read Error\n"));
+ break;
+ case 0x82:
+ DEBUG ((DEBUG_INFO, "End-to-end Guard Check Error\n"));
+ break;
+ case 0x83:
+ DEBUG ((DEBUG_INFO, "End-to-end Application Tag Check Error\n"));
+ break;
+ case 0x84:
+ DEBUG ((DEBUG_INFO, "End-to-end Reference Tag Check Error\n"));
+ break;
+ case 0x85:
+ DEBUG ((DEBUG_INFO, "Compare Failure\n"));
+ break;
+ case 0x86:
+ DEBUG ((DEBUG_INFO, "Access Denied\n"));
+ break;
+ }
+ break;
+
+ default:
+ DEBUG ((DEBUG_INFO, "Unknown error\n"));
+ break;
+ }
+
+ return EFI_DEVICE_ERROR;
+}
+
+/**
+ Create PRP lists for Data transfer which is larger than 2 memory pages.
+ Note here we calcuate the number of required PRP lists and allocate them at one time.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] SqId - The SQ index for this PRP
+ @param[in] PhysicalAddr - The physical base address of Data Buffer.
+ @param[in] Pages - The number of pages to be transfered.
+ @param[out] PrpListHost - The host base address of PRP lists.
+ @param[in,out] PrpListNo - The number of PRP List.
+
+ @retval The pointer Value to the first PRP List of the PRP lists.
+
+**/
+STATIC
+UINT64
+NvmeCreatePrpList (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT16 SqId,
+ IN EFI_PHYSICAL_ADDRESS PhysicalAddr,
+ IN UINTN Pages,
+ OUT VOID **PrpListHost,
+ IN OUT UINTN *PrpListNo
+ )
+{
+ UINTN PrpEntryNo;
+ UINT64 PrpListBase;
+ UINTN PrpListIndex;
+ UINTN PrpEntryIndex;
+ UINT64 Remainder;
+ EFI_PHYSICAL_ADDRESS PrpListPhyAddr;
+ UINTN Bytes;
+ UINT8 *PrpEntry;
+ EFI_PHYSICAL_ADDRESS NewPhyAddr;
+
+ ///
+ /// The number of Prp Entry in a memory page.
+ ///
+ PrpEntryNo = EFI_PAGE_SIZE / sizeof (UINT64);
+
+ ///
+ /// Calculate total PrpList number.
+ ///
+ *PrpListNo = (UINTN) DivU64x64Remainder ((UINT64)Pages, (UINT64)PrpEntryNo, &Remainder);
+ if (Remainder != 0) {
+ *PrpListNo += 1;
+ }
+
+ if (*PrpListNo > NVME_PRP_SIZE) {
+ DEBUG ((DEBUG_INFO, "NvmeCreatePrpList (PhysicalAddr: %lx, Pages: %x) PrpEntryNo: %x\n",
+ PhysicalAddr, Pages, PrpEntryNo));
+ DEBUG ((DEBUG_INFO, "*PrpListNo: %x, Remainder: %lx", *PrpListNo, Remainder));
+ ASSERT (FALSE);
+ }
+ *PrpListHost = (VOID *)(UINTN) NVME_PRP_BASE (Nvme, SqId);
+
+ Bytes = EFI_PAGES_TO_SIZE (*PrpListNo);
+ PrpListPhyAddr = (UINT64)(UINTN)(*PrpListHost);
+
+ ///
+ /// Fill all PRP lists except of last one.
+ ///
+ ZeroMem (*PrpListHost, Bytes);
+ for (PrpListIndex = 0; PrpListIndex < *PrpListNo - 1; ++PrpListIndex) {
+ PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
+
+ for (PrpEntryIndex = 0; PrpEntryIndex < PrpEntryNo; ++PrpEntryIndex) {
+ PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex * sizeof(UINT64));
+ if (PrpEntryIndex != PrpEntryNo - 1) {
+ ///
+ /// Fill all PRP entries except of last one.
+ ///
+ CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof (UINT64));
+ PhysicalAddr += EFI_PAGE_SIZE;
+ } else {
+ ///
+ /// Fill last PRP entries with next PRP List pointer.
+ ///
+ NewPhyAddr = (PrpListPhyAddr + (PrpListIndex + 1) * EFI_PAGE_SIZE);
+ CopyMem (PrpEntry, (VOID *)(UINTN) (&NewPhyAddr), sizeof (UINT64));
+ }
+ }
+ }
+
+ ///
+ /// Fill last PRP list.
+ ///
+ PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
+ for (PrpEntryIndex = 0; PrpEntryIndex < ((Remainder != 0) ? Remainder : PrpEntryNo); ++PrpEntryIndex) {
+ PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex * sizeof(UINT64));
+ CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof (UINT64));
+
+ PhysicalAddr += EFI_PAGE_SIZE;
+ }
+
+ return PrpListPhyAddr;
+}
+
+/**
+ Check whether there are available command slots.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Qid - Queue index
+
+ @retval EFI_SUCCESS - Available command slot is found
+ @retval EFI_NOT_READY - No available command slot is found
+ @retval EFI_DEVICE_ERROR - Error occurred on device side.
+
+**/
+EFI_STATUS
+NvmeHasFreeCmdSlot (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT8 Qid
+ )
+{
+ return TRUE;
+}
+
+/**
+ Check whether all command slots are clean.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Qid - Queue index
+
+ @retval EFI_SUCCESS - All command slots are clean
+ @retval EFI_NOT_READY - Not all command slots are clean
+ @retval EFI_DEVICE_ERROR - Error occurred on device side.
+
+**/
+EFI_STATUS
+NvmeIsAllCmdSlotClean (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT8 Qid
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Waits until all NVME commands completed.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Qid - Queue index
+
+ @retval EFI_SUCCESS - All NVME commands have completed
+ @retval EFI_TIMEOUT - Timeout occured
+ @retval EFI_NOT_READY - Not all NVME commands have completed
+ @retval others - Error occurred on device side.
+**/
+EFI_STATUS
+NvmeWaitAllComplete (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT8 Qid
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports
+ both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the nonblocking
+ I/O functionality is optional.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] NamespaceId - Is a 32 bit Namespace ID to which the Express HCI command packet will be sent.
+ A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
+ ID specifies that the command packet should be sent to all valid namespaces.
+ @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to which the Express HCI command packet will be sent.
+ A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
+ UUID specifies that the command packet should be sent to all valid namespaces.
+ @param[in,out] Packet - A pointer to the NVM Express HCI Command Packet to send to the NVMe namespace specified
+ by NamespaceId.
+
+ @retval EFI_SUCCESS - The NVM Express Command Packet was sent by the host. TransferLength bytes were transferred
+ to, or from DataBuffer.
+ @retval EFI_NOT_READY - The NVM Express Command Packet could not be sent because the controller is not ready. The caller
+ may retry again later.
+ @retval EFI_DEVICE_ERROR - A device error occurred while attempting to send the NVM Express Command Packet.
+ @retval EFI_INVALID_PARAMETER - Namespace, or the contents of NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
+ Express Command Packet was not sent, so no additional status information is available.
+ @retval EFI_UNSUPPORTED - The command described by the NVM Express Command Packet is not supported by the host adapter.
+ The NVM Express Command Packet was not sent, so no additional status information is available.
+ @retval EFI_TIMEOUT - A timeout occurred while waiting for the NVM Express Command Packet to execute.
+
+**/
+EFI_STATUS
+NvmePassThru (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT32 NamespaceId,
+ IN UINT64 NamespaceUuid,
+ IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
+ )
+{
+ EFI_STATUS Status;
+ NVME_SQ *Sq;
+ NVME_CQ *Cq;
+ UINT8 Qid;
+ UINT32 Bytes;
+ UINT32 Offset;
+ EFI_PHYSICAL_ADDRESS PhyAddr;
+ VOID *PrpListHost;
+ UINTN PrpListNo;
+ UINT32 Timer;
+ UINTN SqSize;
+ UINTN CqSize;
+
+ ///
+ /// check the Data fields in Packet parameter.
+ ///
+ if ((Nvme == NULL) || (Packet == NULL)) {
+ DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter: Nvme(%x)/Packet(%x)\n",
+ (UINTN)Nvme, (UINTN)Packet));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Packet->NvmeCmd == NULL) || (Packet->NvmeResponse == NULL)) {
+ DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter: NvmeCmd(%x)/NvmeResponse(%x)\n",
+ (UINTN)Packet->NvmeCmd, (UINTN)Packet->NvmeResponse));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Packet->QueueId != NVME_ADMIN_QUEUE && Packet->QueueId != NVME_IO_QUEUE) {
+ DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter: QueueId(%x)\n",
+ Packet->QueueId));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ PrpListHost = NULL;
+ PrpListNo = 0;
+ Status = EFI_SUCCESS;
+
+ Qid = Packet->QueueId;
+ Sq = Nvme->SqBuffer[Qid] + Nvme->SqTdbl[Qid].Sqt;
+ Cq = Nvme->CqBuffer[Qid] + Nvme->CqHdbl[Qid].Cqh;
+ if (Qid == NVME_ADMIN_QUEUE) {
+ SqSize = NVME_ASQ_SIZE + 1;
+ CqSize = NVME_ACQ_SIZE + 1;
+ } else {
+ SqSize = NVME_CSQ_DEPTH;
+ CqSize = NVME_CCQ_DEPTH;
+ }
+
+ if (Packet->NvmeCmd->Nsid != NamespaceId) {
+ DEBUG ((DEBUG_ERROR, "NvmePassThru: Nsid mismatch (%x, %x)\n",
+ Packet->NvmeCmd->Nsid, NamespaceId));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ZeroMem (Sq, sizeof (NVME_SQ));
+ Sq->Opc = Packet->NvmeCmd->Cdw0.Opcode;
+ Sq->Fuse = Packet->NvmeCmd->Cdw0.FusedOperation;
+ Sq->Cid = Packet->NvmeCmd->Cdw0.Cid;
+ Sq->Nsid = Packet->NvmeCmd->Nsid;
+
+ ///
+ /// Currently we only support PRP for Data transfer, SGL is NOT supported.
+ ///
+ ASSERT (Sq->Psdt == 0);
+ if (Sq->Psdt != 0) {
+ DEBUG ((DEBUG_ERROR, "NvmePassThru: doesn't support SGL mechanism\n"));
+ return EFI_UNSUPPORTED;
+ }
+
+ Sq->Prp[0] = Packet->TransferBuffer;
+ Sq->Prp[1] = 0;
+
+ if(Packet->MetadataBuffer != (UINT64)(UINTN)NULL) {
+ Sq->Mptr = Packet->MetadataBuffer;
+ }
+
+ ///
+ /// If the Buffer Size spans more than two memory pages (page Size as defined in CC.Mps),
+ /// then build a PRP list in the second PRP submission queue entry.
+ ///
+ Offset = ((UINT32)Sq->Prp[0]) & (EFI_PAGE_SIZE - 1);
+ Bytes = Packet->TransferLength;
+
+ if ((Offset + Bytes) > (EFI_PAGE_SIZE * 2)) {
+ ///
+ /// Create PrpList for remaining Data Buffer.
+ ///
+ PhyAddr = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
+ Sq->Prp[1] = NvmeCreatePrpList (Nvme, Nvme->SqTdbl[Qid].Sqt, PhyAddr, EFI_SIZE_TO_PAGES(Offset + Bytes) - 1, &PrpListHost, &PrpListNo);
+ if (Sq->Prp[1] == 0) {
+ Status = EFI_OUT_OF_RESOURCES;
+ DEBUG ((DEBUG_ERROR, "NvmeCreatePrpList fail, Status: %r\n", Status));
+ goto EXIT;
+ }
+
+ } else if ((Offset + Bytes) > EFI_PAGE_SIZE) {
+ Sq->Prp[1] = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
+ }
+
+ if(Packet->NvmeCmd->Flags & CDW10_VALID) {
+ Sq->Payload.Raw.Cdw10 = Packet->NvmeCmd->Cdw10;
+ }
+ if(Packet->NvmeCmd->Flags & CDW11_VALID) {
+ Sq->Payload.Raw.Cdw11 = Packet->NvmeCmd->Cdw11;
+ }
+ if(Packet->NvmeCmd->Flags & CDW12_VALID) {
+ Sq->Payload.Raw.Cdw12 = Packet->NvmeCmd->Cdw12;
+ }
+ if(Packet->NvmeCmd->Flags & CDW13_VALID) {
+ Sq->Payload.Raw.Cdw13 = Packet->NvmeCmd->Cdw13;
+ }
+ if(Packet->NvmeCmd->Flags & CDW14_VALID) {
+ Sq->Payload.Raw.Cdw14 = Packet->NvmeCmd->Cdw14;
+ }
+ if(Packet->NvmeCmd->Flags & CDW15_VALID) {
+ Sq->Payload.Raw.Cdw15 = Packet->NvmeCmd->Cdw15;
+ }
+
+ ///
+ /// Ring the submission queue doorbell.
+ ///
+ Nvme->SqTdbl[Qid].Sqt++;
+ if(Nvme->SqTdbl[Qid].Sqt == SqSize) {
+ Nvme->SqTdbl[Qid].Sqt = 0;
+ }
+ Status = NVME_SET_SQTDBL (Nvme, Qid, &Nvme->SqTdbl[Qid]);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NVME_SET_SQTDBL fail, Status: %r\n", Status));
+ goto EXIT;
+ }
+
+ ///
+ /// Wait for completion queue to get filled in.
+ ///
+ Status = EFI_TIMEOUT;
+ Timer = 0;
+ while (Timer < NVME_CMD_TIMEOUT) {
+ //DEBUG ((DEBUG_VERBOSE, "Timer: %x, Cq:\n", Timer));
+ //DumpMem (Cq, sizeof (NVME_CQ));
+ if (Cq->Pt != Nvme->Pt[Qid]) {
+ Status = EFI_SUCCESS;
+ break;
+ }
+
+ MicroSecondDelay (NVME_CMD_WAIT);
+ Timer += NVME_CMD_WAIT;
+ }
+
+ Nvme->CqHdbl[Qid].Cqh++;
+ if (Nvme->CqHdbl[Qid].Cqh == CqSize) {
+ Nvme->CqHdbl[Qid].Cqh = 0;
+ Nvme->Pt[Qid] ^= 1;
+ }
+
+ ///
+ /// Copy the Respose Queue entry for this command to the callers response Buffer
+ ///
+ CopyMem (Packet->NvmeResponse, Cq, sizeof(NVM_EXPRESS_RESPONSE));
+
+ if (!EFI_ERROR(Status)) { // We still need to check CQ status if no timeout error occured
+ Status = NvmeCheckCqStatus (Cq);
+ }
+ NVME_SET_CQHDBL (Nvme, Qid, &Nvme->CqHdbl[Qid]);
+
+EXIT:
+ return Status;
+}
+
+/**
+ Get identify controller Data.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Buffer - The Buffer used to store the identify controller Data.
+
+ @return EFI_SUCCESS - Successfully get the identify controller Data.
+ @return others - Fail to get the identify controller Data.
+
+**/
+STATIC
+EFI_STATUS
+NvmeIdentifyController (
+ IN NVME_CONTEXT *Nvme,
+ IN VOID *Buffer
+ )
+{
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+
+ Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
+ Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
+ //
+ // According to Nvm Express 1.1 spec Figure 38, When not used, the field shall be cleared to 0h.
+ // For the Identify command, the Namespace Identifier is only used for the Namespace Data structure.
+ //
+ Command.Nsid = 0;
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+ CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
+ CommandPacket.TransferLength = sizeof (NVME_ADMIN_CONTROLLER_DATA);
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_ADMIN_QUEUE;
+ //
+ // Set bit 0 (Cns bit) to 1 to identify a controller
+ //
+ Command.Cdw10 = 1;
+ Command.Flags = CDW10_VALID;
+
+ Status = NvmePassThru (
+ Nvme,
+ NVME_CONTROLLER_ID,
+ 0,
+ &CommandPacket
+ );
+ if (!EFI_ERROR (Status)) {
+ Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
+ }
+
+ return Status;
+}
+
+/**
+ Get specified identify namespace Data.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] NamespaceId - The specified namespace identifier.
+ @param[in] Buffer - The Buffer used to store the identify namespace Data.
+
+ @return EFI_SUCCESS - Successfully get the identify namespace Data.
+ @return others - Fail to get the identify namespace Data.
+
+**/
+STATIC
+EFI_STATUS
+NvmeIdentifyNamespace (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT32 NamespaceId,
+ IN VOID *Buffer
+ )
+{
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+
+ Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
+ Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
+ Command.Nsid = NamespaceId;
+ CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
+ CommandPacket.TransferLength = sizeof (NVME_ADMIN_NAMESPACE_DATA);
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_ADMIN_QUEUE;
+ //
+ // Set bit 0 (Cns bit) to 1 to identify a namespace
+ //
+ CommandPacket.NvmeCmd->Cdw10 = 0;
+ CommandPacket.NvmeCmd->Flags = CDW10_VALID;
+
+ Status = NvmePassThru (
+ Nvme,
+ NamespaceId,
+ 0,
+ &CommandPacket
+ );
+ if (!EFI_ERROR (Status)) {
+ Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
+ }
+
+ return Status;
+}
+
+/**
+ Get Block Size for specific namespace of NVME.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @return - Block Size in bytes
+
+**/
+STATIC
+UINT32
+NvmeGetBlockSize (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ UINT32 BlockSize;
+ UINT32 Lbads;
+ UINT32 Flbas;
+ UINT32 LbaFmtIdx;
+
+ Flbas = Nvme->NamespaceData->Flbas;
+ LbaFmtIdx = Flbas & 3;
+ Lbads = Nvme->NamespaceData->LbaFormat[LbaFmtIdx].Lbads;
+
+ BlockSize = (UINT32)1 << Lbads;
+ return BlockSize;
+}
+
+/**
+ Get last LBA for specific namespace of NVME.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @return - Last LBA address
+
+**/
+STATIC
+EFI_LBA
+NvmeGetLastLba (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ EFI_LBA LastBlock;
+ LastBlock = Nvme->NamespaceData->Nsze - 1;
+ return LastBlock;
+}
+
+/**
+ Create io completion queue.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @return EFI_SUCCESS - Successfully create io completion queue.
+ @return others - Fail to create io completion queue.
+
+**/
+STATIC
+EFI_STATUS
+NvmeCreateIoCompletionQueue (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+ NVME_ADMIN_CRIOCQ CrIoCq;
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+ ZeroMem (&CrIoCq, sizeof(NVME_ADMIN_CRIOCQ));
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+
+ Command.Cdw0.Opcode = NVME_ADMIN_CRIOCQ_OPC;
+ Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
+ CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
+ CommandPacket.TransferLength = EFI_PAGE_SIZE;
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_ADMIN_QUEUE;
+
+ CrIoCq.Qid = NVME_IO_QUEUE;
+ CrIoCq.Qsize = NVME_CCQ_SIZE;
+ CrIoCq.Pc = 1;
+ CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoCq, sizeof (NVME_ADMIN_CRIOCQ));
+ CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
+
+ Status = NvmePassThru (
+ Nvme,
+ NVME_CONTROLLER_ID,
+ 0,
+ &CommandPacket
+ );
+ if (!EFI_ERROR (Status)) {
+ Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
+ }
+
+ return Status;
+}
+
+/**
+ Create io submission queue.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @return EFI_SUCCESS - Successfully create io submission queue.
+ @return others - Fail to create io submission queue.
+
+**/
+STATIC
+EFI_STATUS
+NvmeCreateIoSubmissionQueue (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+ NVME_ADMIN_CRIOSQ CrIoSq;
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+ ZeroMem (&CrIoSq, sizeof(NVME_ADMIN_CRIOSQ));
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+
+ Command.Cdw0.Opcode = NVME_ADMIN_CRIOSQ_OPC;
+ Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
+ CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
+ CommandPacket.TransferLength = EFI_PAGE_SIZE;
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_ADMIN_QUEUE;
+
+ CrIoSq.Qid = NVME_IO_QUEUE;
+ CrIoSq.Qsize = NVME_CSQ_SIZE;
+ CrIoSq.Pc = 1;
+ CrIoSq.Cqid = NVME_IO_QUEUE;
+ CrIoSq.Qprio = 0;
+ CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoSq, sizeof (NVME_ADMIN_CRIOSQ));
+ CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
+
+ Status = NvmePassThru (
+ Nvme,
+ NVME_CONTROLLER_ID,
+ 0,
+ &CommandPacket
+ );
+ if (!EFI_ERROR (Status)) {
+ Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
+ }
+
+ return Status;
+}
+
+/**
+ Security send and receive commands.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] SendCommand - The flag to indicate the command type, TRUE for Send command and FALSE for receive command
+ @param[in] SecurityProtocol - Security Protocol
+ @param[in] SpSpecific - Security Protocol Specific
+ @param[in] TransferLength - Transfer Length of Buffer (in bytes) - always a multiple of 512
+ @param[in,out] TransferBuffer - Address of Data to transfer
+
+ @return EFI_SUCCESS - Successfully create io submission queue.
+ @return others - Fail to send/receive commands.
+
+**/
+EFI_STATUS
+NvmeSecuritySendReceive (
+ IN NVME_CONTEXT *Nvme,
+ IN BOOLEAN SendCommand,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SpSpecific,
+ IN UINTN TransferLength,
+ IN OUT VOID *TransferBuffer
+ )
+{
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+ NVME_ADMIN_SECSEND SecSend;
+ OACS *Oacs;
+ UINT8 Opcode;
+ VOID* *SecBuff;
+
+ Oacs = (OACS *)&Nvme->ControllerData->Oacs;
+
+ //
+ // Verify security bit for Security Send/Receive commands
+ //
+ if (Oacs->Security == 0) {
+ DEBUG ((DEBUG_ERROR, "Security command doesn't support.\n"));
+ return EFI_NOT_READY;
+ }
+
+ SecBuff = (VOID *)(UINTN) NVME_SEC_BASE (Nvme);
+
+ //
+ // Actions for sending security command
+ //
+ if (SendCommand) {
+ CopyMem (SecBuff, TransferBuffer, TransferLength);
+ }
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+ ZeroMem (&SecSend, sizeof(NVME_ADMIN_SECSEND));
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+
+ Opcode = (UINT8)(SendCommand ? NVME_ADMIN_SECURITY_SEND_OPC : NVME_ADMIN_SECURITY_RECV_OPC);
+ Command.Cdw0.Opcode = Opcode;
+ Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
+ CommandPacket.TransferBuffer = (UINT64)(UINTN)SecBuff;
+ CommandPacket.TransferLength = (UINT32)TransferLength;
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_ADMIN_QUEUE;
+
+ SecSend.Spsp = SpSpecific;
+ SecSend.Secp = SecurityProtocol;
+ SecSend.Tl = (UINT32)TransferLength;
+
+ CopyMem (&CommandPacket.NvmeCmd->Cdw10, &SecSend, sizeof (NVME_ADMIN_SECSEND));
+ CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
+
+ Status = NvmePassThru (
+ Nvme,
+ NVME_CONTROLLER_ID,
+ 0,
+ &CommandPacket
+ );
+ if (!EFI_ERROR (Status)) {
+ Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
+ }
+
+ //
+ // Actions for receiving security command
+ //
+ if (!SendCommand) {
+ CopyMem (TransferBuffer, SecBuff, TransferLength);
+ }
+
+ return Status;
+}
+
+/**
+ Destroy io completion queue.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @return EFI_SUCCESS - Successfully destroy io completion queue.
+ @return others - Fail to destroy io completion queue.
+
+**/
+STATIC
+EFI_STATUS
+NvmeDestroyIoCompletionQueue (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+ NVME_ADMIN_DEIOCQ DelIoCq;
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+ ZeroMem (&DelIoCq, sizeof(NVME_ADMIN_DEIOCQ));
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+
+ Command.Cdw0.Opcode = NVME_ADMIN_DELIOCQ_OPC;
+ Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
+ CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
+ CommandPacket.TransferLength = EFI_PAGE_SIZE;
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_ADMIN_QUEUE;
+
+ DelIoCq.Qid = NVME_IO_QUEUE;
+ CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoCq, sizeof (NVME_ADMIN_DEIOCQ));
+ CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
+
+ Status = NvmePassThru (
+ Nvme,
+ NVME_CONTROLLER_ID,
+ 0,
+ &CommandPacket
+ );
+ if (!EFI_ERROR (Status)) {
+ Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
+ }
+
+ return Status;
+}
+
+/**
+ Destroy io submission queue.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @return EFI_SUCCESS - Successfully destroy io submission queue.
+ @return others - Fail to destroy io submission queue.
+
+**/
+STATIC
+EFI_STATUS
+NvmeDestroyIoSubmissionQueue (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+ NVME_ADMIN_DEIOSQ DelIoSq;
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+ ZeroMem (&DelIoSq, sizeof(NVME_ADMIN_DEIOSQ));
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+
+ Command.Cdw0.Opcode = NVME_ADMIN_DELIOSQ_OPC;
+ Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
+ CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
+ CommandPacket.TransferLength = EFI_PAGE_SIZE;
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_ADMIN_QUEUE;
+
+ DelIoSq.Qid = NVME_IO_QUEUE;
+ CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoSq, sizeof (NVME_ADMIN_DEIOSQ));
+ CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
+
+ Status = NvmePassThru (
+ Nvme,
+ NVME_CONTROLLER_ID,
+ 0,
+ &CommandPacket
+ );
+ if (!EFI_ERROR (Status)) {
+ Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
+ }
+
+ return Status;
+}
+
+/**
+ Allocate transfer-related Data struct which is used at Nvme.
+
+ @param[in, out] Nvme The pointer to the NVME_CONTEXT Data structure.
+
+ @retval EFI_OUT_OF_RESOURCE No enough resource.
+ @retval EFI_SUCCESS Successful to allocate resource.
+
+**/
+EFI_STATUS
+EFIAPI
+NvmeAllocateResource (
+ IN OUT NVME_CONTEXT *Nvme
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS DeviceAddress;
+ VOID *Base;
+ VOID *Mapping;
+
+ //
+ // Allocate resources for DMA.
+ //
+ Status = IoMmuAllocateBuffer (
+ EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE),
+ &Base,
+ &DeviceAddress,
+ &Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
+ Nvme->BaseMemMapping = Mapping;
+ Nvme->BaseMem = Base;
+ ZeroMem (Nvme->BaseMem, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE));
+
+ DEBUG ((
+ DEBUG_INFO,
+ "%a() NvmeContext 0x%x\n",
+ __FUNCTION__,
+ Nvme->BaseMem
+ ));
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Free allocated transfer-related Data struct which is used at NVMe.
+
+ @param[in, out] Nvme The pointer to the NVME_CONTEXT Data structure.
+
+**/
+VOID
+EFIAPI
+NvmeFreeResource (
+ IN OUT NVME_CONTEXT *Nvme
+ )
+{
+ if (Nvme->BaseMem != NULL) {
+ IoMmuFreeBuffer (
+ EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE),
+ Nvme->BaseMem,
+ Nvme->BaseMemMapping
+ );
+ Nvme->BaseMem = NULL;
+ }
+}
+
+/**
+ Initialize the Nvm Express controller.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @retval EFI_SUCCESS - The NVM Express Controller is initialized successfully.
+ @retval Others - A device error occurred while initializing the controller.
+
+**/
+EFI_STATUS
+NvmeControllerInit (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ EFI_STATUS Status;
+ NVME_AQA Aqa;
+ NVME_ASQ Asq;
+ NVME_ACQ Acq;
+ NVME_VER Ver;
+
+ UINT32 MlBAR;
+ UINT32 MuBAR;
+
+ ///
+ /// Update PCIE BAR0/1 for NVME device
+ ///
+ MlBAR = Nvme->Nbar;
+ MuBAR = 0;
+ PciWrite32 (Nvme->PciBase + 0x10, MlBAR); // MLBAR (BAR0)
+ PciWrite32 (Nvme->PciBase + 0x14, MuBAR); // MUBAR (BAR1)
+
+ ///
+ /// Enable PCIE decode
+ ///
+ PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x6);
+
+ // Version
+ NVME_GET_VER (Nvme, &Ver);
+ if (!(Ver.Mjr == 0x0001) && (Ver.Mnr == 0x0000)) {
+ DEBUG ((DEBUG_INFO, "\n!!!\n!!! NVME Version mismatch for the implementation !!!\n!!!\n"));
+ }
+
+ ///
+ /// Read the Controller Capabilities register and verify that the NVM command set is supported
+ ///
+ Status = NVME_GET_CAP (Nvme, &Nvme->Cap);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "NVME_GET_CAP fail, Status: %r\n", Status));
+ goto Done;
+ }
+
+ if (Nvme->Cap.Css != 0x01) {
+ DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: the controller doesn't support NVMe command set\n"));
+ Status = EFI_UNSUPPORTED;
+ goto Done;
+ }
+
+ ///
+ /// Currently the driver only supports 4k page Size.
+ ///
+ if ((Nvme->Cap.Mpsmin + 12) > EFI_PAGE_SHIFT) {
+ DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: only supports 4k page Size\n"));
+ ASSERT (FALSE);
+ Status = EFI_UNSUPPORTED;
+ goto Done;
+ }
+
+ Nvme->Cid[0] = 0;
+ Nvme->Cid[1] = 0;
+
+ Nvme->Pt[0] = 0;
+ Nvme->Pt[1] = 0;
+
+ ZeroMem ((VOID *)(UINTN)(&(Nvme->SqTdbl[0])), sizeof (NVME_SQTDBL) * NVME_MAX_IO_QUEUES);
+ ZeroMem ((VOID *)(UINTN)(&(Nvme->CqHdbl[0])), sizeof (NVME_CQHDBL) * NVME_MAX_IO_QUEUES);
+
+ ZeroMem (Nvme->BaseMem, NVME_MEM_MAX_SIZE);
+
+ Status = NvmeDisableController (Nvme);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NvmeDisableController fail, Status: %r\n", Status));
+ goto Done;
+ }
+
+ ///
+ /// set number of entries admin submission & completion queues.
+ ///
+ Aqa.Asqs = NVME_ASQ_SIZE;
+ Aqa.Rsvd1 = 0;
+ Aqa.Acqs = NVME_ACQ_SIZE;
+ Aqa.Rsvd2 = 0;
+
+ ///
+ /// Address of admin submission queue.
+ ///
+ Asq = (UINT64)(UINTN)(NVME_ASQ_BASE (Nvme) & ~0xFFF);
+
+ ///
+ /// Address of admin completion queue.
+ ///
+ Acq = (UINT64)(UINTN)(NVME_ACQ_BASE (Nvme) & ~0xFFF);
+
+ ///
+ /// Address of I/O submission & completion queue.
+ ///
+ Nvme->SqBuffer[0] = (NVME_SQ *)(UINTN)NVME_ASQ_BASE (Nvme); // NVME_ADMIN_QUEUE
+ Nvme->CqBuffer[0] = (NVME_CQ *)(UINTN)NVME_ACQ_BASE (Nvme); // NVME_ADMIN_QUEUE
+ Nvme->SqBuffer[1] = (NVME_SQ *)(UINTN)NVME_SQ_BASE (Nvme, 0); // NVME_IO_QUEUE
+ Nvme->CqBuffer[1] = (NVME_CQ *)(UINTN)NVME_CQ_BASE (Nvme, 0); // NVME_IO_QUEUE
+
+ DEBUG ((DEBUG_INFO, "Admin Submission Queue Size (Aqa.Asqs) = [%08X]\n", Aqa.Asqs));
+ DEBUG ((DEBUG_INFO, "Admin Completion Queue Size (Aqa.Acqs) = [%08X]\n", Aqa.Acqs));
+ DEBUG ((DEBUG_INFO, "Admin Submission Queue (SqBuffer[0]) = [%08X]\n", Nvme->SqBuffer[0]));
+ DEBUG ((DEBUG_INFO, "Admin Completion Queue (CqBuffer[0]) = [%08X]\n", Nvme->CqBuffer[0]));
+ DEBUG ((DEBUG_INFO, "I/O Submission Queue (SqBuffer[1]) = [%08X]\n", Nvme->SqBuffer[1]));
+ DEBUG ((DEBUG_INFO, "I/O Completion Queue (CqBuffer[1]) = [%08X]\n", Nvme->CqBuffer[1]));
+
+ ///
+ /// Program admin queue attributes.
+ ///
+ Status = NVME_SET_AQA (Nvme, &Aqa);
+ if (EFI_ERROR(Status)) {
+ goto Done;
+ }
+
+ ///
+ /// Program admin submission queue address.
+ ///
+ Status = NVME_SET_ASQ (Nvme, &Asq);
+ if (EFI_ERROR(Status)) {
+ goto Done;
+ }
+
+ ///
+ /// Program admin completion queue address.
+ ///
+ Status = NVME_SET_ACQ (Nvme, &Acq);
+ if (EFI_ERROR(Status)) {
+ goto Done;
+ }
+
+ Status = NvmeEnableController (Nvme);
+ if (EFI_ERROR(Status)) {
+ goto Done;
+ }
+
+ ///
+ /// Create one I/O completion queue.
+ ///
+ Status = NvmeCreateIoCompletionQueue (Nvme);
+ if (EFI_ERROR(Status)) {
+ goto Done;
+ }
+
+ ///
+ /// Create one I/O Submission queue.
+ ///
+ Status = NvmeCreateIoSubmissionQueue (Nvme);
+ if (EFI_ERROR(Status)) {
+ goto Done;
+ }
+
+ ///
+ /// Get current Identify Controller Data
+ ///
+ Nvme->ControllerData = (NVME_ADMIN_CONTROLLER_DATA *)(UINTN) NVME_CONTROL_DATA_BASE (Nvme);
+ Status = NvmeIdentifyController (Nvme, Nvme->ControllerData);
+ if (EFI_ERROR(Status)) {
+ goto Done;
+ }
+
+ ///
+ /// Dump NvmExpress Identify Controller Data
+ ///
+ Nvme->ControllerData->Sn[19] = 0;
+ Nvme->ControllerData->Mn[39] = 0;
+ //NvmeDumpIdentifyController (Nvme->ControllerData);
+
+ ///
+ /// Get current Identify Namespace Data
+ ///
+ Nvme->NamespaceData = (NVME_ADMIN_NAMESPACE_DATA *)NVME_NAMESPACE_DATA_BASE (Nvme);
+ Status = NvmeIdentifyNamespace (Nvme, Nvme->Nsid, Nvme->NamespaceData);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NvmeIdentifyNamespace fail, Status = %r\n", Status));
+ goto Done;
+ }
+
+ ///
+ /// Dump NvmExpress Identify Namespace Data
+ ///
+ if (Nvme->NamespaceData->Ncap == 0) {
+ DEBUG ((DEBUG_ERROR, "Invalid Namespace, Ncap: %lx\n", Nvme->NamespaceData->Ncap));
+ Status = EFI_DEVICE_ERROR;
+ goto Done;
+ }
+
+ Nvme->BlockSize = NvmeGetBlockSize (Nvme);
+ Nvme->LastBlock = NvmeGetLastLba (Nvme);
+
+ Nvme->State = NvmeStatusInit;
+
+ return EFI_SUCCESS;
+
+Done:
+ return Status;
+}
+
+/**
+ Un-initialize the Nvm Express controller.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @retval EFI_SUCCESS - The NVM Express Controller is un-initialized successfully.
+ @retval Others - A device error occurred while un-initializing the controller.
+
+**/
+EFI_STATUS
+NvmeControllerExit (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ EFI_STATUS Status;
+
+ Status = EFI_SUCCESS;
+ if (Nvme->State == NvmeStatusInit || Nvme->State == NvmeStatusMax) {
+ ///
+ /// Destroy I/O Submission queue.
+ ///
+ Status = NvmeDestroyIoSubmissionQueue (Nvme);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NvmeDestroyIoSubmissionQueue fail, Status = %r\n", Status));
+ return Status;
+ }
+
+ ///
+ /// Destroy I/O completion queue.
+ ///
+ Status = NvmeDestroyIoCompletionQueue (Nvme);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NvmeDestroyIoCompletionQueue fail, Status = %r\n", Status));
+ return Status;
+ }
+
+ Status = NvmeShutdownController (Nvme);
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NvmeShutdownController fail, Status: %r\n", Status));
+ }
+ }
+
+ ///
+ /// Disable PCIE decode
+ ///
+ PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x0);
+ PciWrite32 (Nvme->PciBase + 0x10, 0); // MLBAR (BAR0)
+ PciWrite32 (Nvme->PciBase + 0x14, 0); // MUBAR (BAR1)
+
+ Nvme->State = NvmeStatusUnknown;
+ return Status;
+}
+
+/**
+ Read sector Data from the NVMe device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in,out] Buffer - The Buffer used to store the Data read from the device.
+ @param[in] Lba - The start block number.
+ @param[in] Blocks - Total block number to be read.
+
+ @retval EFI_SUCCESS - Datum are read from the device.
+ @retval Others - Fail to read all the datum.
+
+**/
+EFI_STATUS
+NvmeReadSectors (
+ IN NVME_CONTEXT *Nvme,
+ IN OUT UINT64 Buffer,
+ IN UINT64 Lba,
+ IN UINT32 Blocks
+ )
+{
+ UINT32 Bytes;
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+ UINT32 BlockSize;
+
+ BlockSize = Nvme->BlockSize;
+ Bytes = Blocks * BlockSize;
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+
+ CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_READ_OPC;
+ CommandPacket.NvmeCmd->Cdw0.Cid = Nvme->Cid[NVME_IO_QUEUE]++;
+ CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
+ CommandPacket.TransferBuffer = Buffer;
+
+ CommandPacket.TransferLength = Bytes;
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_IO_QUEUE;
+
+ CommandPacket.NvmeCmd->Cdw10 = (UINT32)Lba;
+ CommandPacket.NvmeCmd->Cdw11 = (UINT32)(RShiftU64 (Lba, 32));
+ CommandPacket.NvmeCmd->Cdw12 = (Blocks - 1) & 0xFFFF;
+
+ CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID | CDW12_VALID;
+
+ Status = NvmePassThru (
+ Nvme,
+ Nvme->Nsid,
+ 0,
+ &CommandPacket
+ );
+
+ return Status;
+}
+
+/**
+ Write sector Data to the NVMe device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Buffer - The Buffer to be written into the device.
+ @param[in] Lba - The start block number.
+ @param[in] Blocks - Total block number to be written.
+
+ @retval EFI_SUCCESS - Datum are written into the Buffer.
+ @retval Others - Fail to write all the datum.
+
+**/
+EFI_STATUS
+NvmeWriteSectors (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT64 Buffer,
+ IN UINT64 Lba,
+ IN UINT32 Blocks
+ )
+{
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+ UINT32 Bytes;
+ UINT32 BlockSize;
+
+ BlockSize = Nvme->BlockSize;
+ Bytes = Blocks * BlockSize;
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+
+ CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_WRITE_OPC;
+ CommandPacket.NvmeCmd->Cdw0.Cid = Nvme->Cid[NVME_IO_QUEUE]++;
+ CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
+ CommandPacket.TransferBuffer = Buffer;
+
+ CommandPacket.TransferLength = Bytes;
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_IO_QUEUE;
+
+ CommandPacket.NvmeCmd->Cdw10 = (UINT32)Lba;
+ CommandPacket.NvmeCmd->Cdw11 = (UINT32)(RShiftU64 (Lba, 32));
+ CommandPacket.NvmeCmd->Cdw12 = (Blocks - 1) & 0xFFFF;
+
+ CommandPacket.MetadataBuffer = (UINT64)(UINTN)NULL;
+ CommandPacket.MetadataLength = 0;
+
+ CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID | CDW12_VALID;
+
+ Status = NvmePassThru (
+ Nvme,
+ Nvme->Nsid,
+ 0,
+ &CommandPacket
+ );
+
+ return Status;
+}
+
+/**
+ Flushes all modified Data to the device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @retval EFI_SUCCESS - Datum are written into the Buffer.
+ @retval Others - Fail to write all the datum.
+
+**/
+EFI_STATUS
+NvmeFlush (
+ IN NVME_CONTEXT *Nvme
+ )
+{
+ NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
+ NVM_EXPRESS_COMMAND Command;
+ NVM_EXPRESS_RESPONSE Response;
+ EFI_STATUS Status;
+
+ ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
+ ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
+ ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
+
+ CommandPacket.NvmeCmd = &Command;
+ CommandPacket.NvmeResponse = &Response;
+
+ CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_FLUSH_OPC;
+ CommandPacket.NvmeCmd->Cdw0.Cid = Nvme->Cid[NVME_IO_QUEUE]++;
+ CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
+ CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
+ CommandPacket.QueueId = NVME_IO_QUEUE;
+
+ Status = NvmePassThru (
+ Nvme,
+ Nvme->Nsid,
+ 0,
+ &CommandPacket
+ );
+ if (!EFI_ERROR (Status)) {
+ Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
+ }
+
+ return Status;
+}
+
+/**
+ Read some blocks from the device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[out] Buffer - The Buffer used to store the Data read from the device.
+ @param[in] Lba - The start block number.
+ @param[in] Blocks - Total block number to be read.
+
+ @retval EFI_SUCCESS - Datum are read from the device.
+ @retval Others - Fail to read all the datum.
+
+**/
+EFI_STATUS
+NvmeRead (
+ IN NVME_CONTEXT *Nvme,
+ OUT UINT64 Buffer,
+ IN UINT64 Lba,
+ IN UINTN Blocks
+ )
+{
+ EFI_STATUS Status;
+ UINT32 BlockSize;
+ UINT32 MaxTransferBlocks;
+
+ ASSERT (Blocks <= NVME_MAX_SECTORS);
+ Status = EFI_SUCCESS;
+ BlockSize = Nvme->BlockSize;
+ if (Nvme->ControllerData->Mdts != 0) {
+ MaxTransferBlocks = (1 << (Nvme->ControllerData->Mdts)) * (1 << (Nvme->Cap.Mpsmin + 12)) / BlockSize;
+ } else {
+ MaxTransferBlocks = 1024;
+ }
+
+ while (Blocks > 0) {
+ if (Blocks > MaxTransferBlocks) {
+ Status = NvmeReadSectors (Nvme, Buffer, Lba, MaxTransferBlocks);
+
+ Blocks -= MaxTransferBlocks;
+ Buffer += (MaxTransferBlocks * BlockSize);
+ Lba += MaxTransferBlocks;
+ } else {
+ Status = NvmeReadSectors (Nvme, Buffer, Lba, (UINT32) Blocks);
+ Blocks = 0;
+ }
+
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NvmeRead fail, Status = %r\n", Status));
+ break;
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Write some blocks to the device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Buffer - The Buffer to be written into the device.
+ @param[in] Lba - The start block number.
+ @param[in] Blocks - Total block number to be written.
+
+ @retval EFI_SUCCESS - Datum are written into the Buffer.
+ @retval Others - Fail to write all the datum.
+
+**/
+EFI_STATUS
+NvmeWrite (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT64 Buffer,
+ IN UINT64 Lba,
+ IN UINTN Blocks
+ )
+{
+ EFI_STATUS Status;
+ UINT32 BlockSize;
+ UINT32 MaxTransferBlocks;
+
+ ASSERT (Blocks <= NVME_MAX_SECTORS);
+ Status = EFI_SUCCESS;
+ BlockSize = Nvme->BlockSize;
+
+ if (Nvme->ControllerData->Mdts != 0) {
+ MaxTransferBlocks = (1 << (Nvme->ControllerData->Mdts)) * (1 << (Nvme->Cap.Mpsmin + 12)) / BlockSize;
+ } else {
+ MaxTransferBlocks = 1024;
+ }
+
+ while (Blocks > 0) {
+ if (Blocks > MaxTransferBlocks) {
+ Status = NvmeWriteSectors (Nvme, Buffer, Lba, MaxTransferBlocks);
+
+ Blocks -= MaxTransferBlocks;
+ Buffer += (MaxTransferBlocks * BlockSize);
+ Lba += MaxTransferBlocks;
+ } else {
+ Status = NvmeWriteSectors (Nvme, Buffer, Lba, (UINT32) Blocks);
+ Blocks = 0;
+ }
+
+ if (EFI_ERROR(Status)) {
+ DEBUG ((DEBUG_ERROR, "NvmeWrite fail, Status = %r\n", Status));
+ break;
+ }
+ }
+
+ return Status;
+}
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
new file mode 100644
index 000000000000..3fef3dbc1c0d
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
@@ -0,0 +1,455 @@
+/** @file
+ Header file for NVMe function definitions
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __OPAL_PASSWORD_NVME_MODE_H__
+#define __OPAL_PASSWORD_NVME_MODE_H__
+
+
+#include "OpalNvmeReg.h"
+
+#define NVME_MAX_SECTORS 0x10000
+//
+// QueueId
+//
+#define NVME_ADMIN_QUEUE 0x00
+#define NVME_IO_QUEUE 0x01
+
+typedef struct {
+ UINT8 Opcode;
+ UINT8 FusedOperation;
+ #define NORMAL_CMD 0x00
+ #define FUSED_FIRST_CMD 0x01
+ #define FUSED_SECOND_CMD 0x02
+ UINT16 Cid;
+} NVME_CDW0;
+
+typedef struct {
+ NVME_CDW0 Cdw0;
+ UINT8 Flags;
+ #define CDW10_VALID 0x01
+ #define CDW11_VALID 0x02
+ #define CDW12_VALID 0x04
+ #define CDW13_VALID 0x08
+ #define CDW14_VALID 0x10
+ #define CDW15_VALID 0x20
+ UINT32 Nsid;
+ UINT32 Cdw10;
+ UINT32 Cdw11;
+ UINT32 Cdw12;
+ UINT32 Cdw13;
+ UINT32 Cdw14;
+ UINT32 Cdw15;
+} NVM_EXPRESS_COMMAND;
+
+typedef struct {
+ UINT32 Cdw0;
+ UINT32 Cdw1;
+ UINT32 Cdw2;
+ UINT32 Cdw3;
+} NVM_EXPRESS_RESPONSE;
+
+typedef struct {
+ UINT64 CommandTimeout;
+ UINT64 TransferBuffer;
+ UINT32 TransferLength;
+ UINT64 MetadataBuffer;
+ UINT32 MetadataLength;
+ UINT8 QueueId;
+ NVM_EXPRESS_COMMAND *NvmeCmd;
+ NVM_EXPRESS_RESPONSE *NvmeResponse;
+} NVM_EXPRESS_PASS_THRU_COMMAND_PACKET;
+
+
+#pragma pack(1)
+
+// Internal fields
+typedef enum {
+ NvmeStatusUnknown,
+ NvmeStatusInit,
+ NvmeStatusInuse,
+ NvmeStatusMax,
+} NVME_STATUS;
+
+typedef struct {
+ UINT32 Nbar;
+ VOID *BaseMem;
+ VOID *BaseMemMapping;
+ BOOLEAN PollCancellation;
+ UINT16 NvmeInitWaitTime;
+
+ NVME_STATUS State;
+ UINT8 BusID;
+ UINT8 DeviceID;
+ UINT8 FuncID;
+ UINTN PciBase;
+
+ UINT32 Nsid;
+ UINT64 Nsuuid;
+ UINT32 BlockSize;
+ EFI_LBA LastBlock;
+
+ //
+ // Pointers to 4kB aligned submission & completion queues.
+ //
+ NVME_SQ *SqBuffer[NVME_MAX_IO_QUEUES];
+ NVME_CQ *CqBuffer[NVME_MAX_IO_QUEUES];
+ UINT16 Cid[NVME_MAX_IO_QUEUES];
+
+ //
+ // Submission and completion queue indices.
+ //
+ NVME_SQTDBL SqTdbl[NVME_MAX_IO_QUEUES];
+ NVME_CQHDBL CqHdbl[NVME_MAX_IO_QUEUES];
+ UINT8 Pt[NVME_MAX_IO_QUEUES];
+
+ UINTN SqeCount[NVME_MAX_IO_QUEUES];
+
+ //
+ // Nvme controller capabilities
+ //
+ NVME_CAP Cap;
+
+ //
+ // pointer to identify controller Data
+ //
+ NVME_ADMIN_CONTROLLER_DATA *ControllerData;
+ NVME_ADMIN_NAMESPACE_DATA *NamespaceData;
+} NVME_CONTEXT;
+
+#pragma pack()
+
+/**
+ Transfer MMIO Data to memory.
+
+ @param[in,out] MemBuffer - Destination: Memory address
+ @param[in] MmioAddr - Source: MMIO address
+ @param[in] Size - Size for read
+
+ @retval EFI_SUCCESS - MMIO read sucessfully
+**/
+EFI_STATUS
+NvmeMmioRead (
+ IN OUT VOID *MemBuffer,
+ IN UINTN MmioAddr,
+ IN UINTN Size
+ );
+
+/**
+ Transfer memory Data to MMIO.
+
+ @param[in,out] MmioAddr - Destination: MMIO address
+ @param[in] MemBuffer - Source: Memory address
+ @param[in] Size - Size for write
+
+ @retval EFI_SUCCESS - MMIO write sucessfully
+**/
+EFI_STATUS
+NvmeMmioWrite (
+ IN OUT UINTN MmioAddr,
+ IN VOID *MemBuffer,
+ IN UINTN Size
+ );
+
+/**
+ Transfer memory data to MMIO.
+
+ @param[in,out] MmioAddr - Destination: MMIO address
+ @param[in] MemBuffer - Source: Memory address
+ @param[in] Size - Size for write
+
+ @retval EFI_SUCCESS - MMIO write sucessfully
+**/
+EFI_STATUS
+OpalPciWrite (
+ IN OUT UINTN MmioAddr,
+ IN VOID *MemBuffer,
+ IN UINTN Size
+ );
+
+/**
+ Transfer MMIO data to memory.
+
+ @param[in,out] MemBuffer - Destination: Memory address
+ @param[in] MmioAddr - Source: MMIO address
+ @param[in] Size - Size for read
+
+ @retval EFI_SUCCESS - MMIO read sucessfully
+**/
+EFI_STATUS
+OpalPciRead (
+ IN OUT VOID *MemBuffer,
+ IN UINTN MmioAddr,
+ IN UINTN Size
+ );
+
+/**
+ Allocate transfer-related Data struct which is used at Nvme.
+
+ @param[in, out] Nvme The pointer to the NVME_CONTEXT Data structure.
+
+ @retval EFI_OUT_OF_RESOURCE No enough resource.
+ @retval EFI_SUCCESS Successful to allocate resource.
+
+**/
+EFI_STATUS
+EFIAPI
+NvmeAllocateResource (
+ IN OUT NVME_CONTEXT *Nvme
+ );
+
+/**
+ Free allocated transfer-related Data struct which is used at NVMe.
+
+ @param[in, out] Nvme The pointer to the NVME_CONTEXT Data structure.
+
+**/
+VOID
+EFIAPI
+NvmeFreeResource (
+ IN OUT NVME_CONTEXT *Nvme
+ );
+
+/**
+ Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports
+ both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the nonblocking
+ I/O functionality is optional.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] NamespaceId - Is a 32 bit Namespace ID to which the Express HCI command packet will be sent.
+ A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
+ ID specifies that the command packet should be sent to all valid namespaces.
+ @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to which the Express HCI command packet will be sent.
+ A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
+ UUID specifies that the command packet should be sent to all valid namespaces.
+ @param[in,out] Packet - A pointer to the NVM Express HCI Command Packet to send to the NVMe namespace specified
+ by NamespaceId.
+
+ @retval EFI_SUCCESS - The NVM Express Command Packet was sent by the host. TransferLength bytes were transferred
+ to, or from DataBuffer.
+ @retval EFI_NOT_READY - The NVM Express Command Packet could not be sent because the controller is not ready. The caller
+ may retry again later.
+ @retval EFI_DEVICE_ERROR - A device error occurred while attempting to send the NVM Express Command Packet.
+ @retval EFI_INVALID_PARAMETER - Namespace, or the contents of NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
+ Express Command Packet was not sent, so no additional status information is available.
+ @retval EFI_UNSUPPORTED - The command described by the NVM Express Command Packet is not supported by the host adapter.
+ The NVM Express Command Packet was not sent, so no additional status information is available.
+ @retval EFI_TIMEOUT - A timeout occurred while waiting for the NVM Express Command Packet to execute.
+
+**/
+EFI_STATUS
+NvmePassThru (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT32 NamespaceId,
+ IN UINT64 NamespaceUuid,
+ IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
+ );
+
+/**
+ Waits until all NVME commands completed.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Qid - Queue index
+
+ @retval EFI_SUCCESS - All NVME commands have completed
+ @retval EFI_TIMEOUT - Timeout occured
+ @retval EFI_NOT_READY - Not all NVME commands have completed
+ @retval others - Error occurred on device side.
+**/
+EFI_STATUS
+NvmeWaitAllComplete (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT8 Qid
+ );
+
+/**
+ Initialize the Nvm Express controller.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @retval EFI_SUCCESS - The NVM Express Controller is initialized successfully.
+ @retval Others - A device error occurred while initializing the controller.
+
+**/
+EFI_STATUS
+NvmeControllerInit (
+ IN NVME_CONTEXT *Nvme
+ );
+
+/**
+ Un-initialize the Nvm Express controller.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @retval EFI_SUCCESS - The NVM Express Controller is un-initialized successfully.
+ @retval Others - A device error occurred while un-initializing the controller.
+
+**/
+EFI_STATUS
+NvmeControllerExit (
+ IN NVME_CONTEXT *Nvme
+ );
+
+/**
+ Check whether there are available command slots.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Qid - Queue index
+
+ @retval EFI_SUCCESS - Available command slot is found
+ @retval EFI_NOT_READY - No available command slot is found
+ @retval EFI_DEVICE_ERROR - Error occurred on device side.
+
+**/
+EFI_STATUS
+NvmeHasFreeCmdSlot (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT8 Qid
+ );
+
+/**
+ Check whether all command slots are clean.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Qid - Queue index
+
+ @retval EFI_SUCCESS - All command slots are clean
+ @retval EFI_NOT_READY - Not all command slots are clean
+ @retval EFI_DEVICE_ERROR - Error occurred on device side.
+
+**/
+EFI_STATUS
+NvmeIsAllCmdSlotClean (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT8 Qid
+ );
+
+/**
+ Read sector Data from the NVMe device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in,out] Buffer - The Buffer used to store the Data read from the device.
+ @param[in] Lba - The start block number.
+ @param[in] Blocks - Total block number to be read.
+
+ @retval EFI_SUCCESS - Datum are read from the device.
+ @retval Others - Fail to read all the datum.
+
+**/
+EFI_STATUS
+NvmeReadSectors (
+ IN NVME_CONTEXT *Nvme,
+ IN OUT UINT64 Buffer,
+ IN UINT64 Lba,
+ IN UINT32 Blocks
+ );
+
+/**
+ Write sector Data to the NVMe device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Buffer - The Buffer to be written into the device.
+ @param[in] Lba - The start block number.
+ @param[in] Blocks - Total block number to be written.
+
+ @retval EFI_SUCCESS - Datum are written into the Buffer.
+ @retval Others - Fail to write all the datum.
+
+**/
+EFI_STATUS
+NvmeWriteSectors (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT64 Buffer,
+ IN UINT64 Lba,
+ IN UINT32 Blocks
+ );
+
+/**
+ Flushes all modified Data to the device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+
+ @retval EFI_SUCCESS - Datum are written into the Buffer.
+ @retval Others - Fail to write all the datum.
+
+**/
+EFI_STATUS
+NvmeFlush (
+ IN NVME_CONTEXT *Nvme
+ );
+
+/**
+ Read some blocks from the device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[out] Buffer - The Buffer used to store the Data read from the device.
+ @param[in] Lba - The start block number.
+ @param[in] Blocks - Total block number to be read.
+
+ @retval EFI_SUCCESS - Datum are read from the device.
+ @retval Others - Fail to read all the datum.
+
+**/
+EFI_STATUS
+NvmeRead (
+ IN NVME_CONTEXT *Nvme,
+ OUT UINT64 Buffer,
+ IN UINT64 Lba,
+ IN UINTN Blocks
+ );
+
+/**
+ Write some blocks to the device.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] Buffer - The Buffer to be written into the device.
+ @param[in] Lba - The start block number.
+ @param[in] Blocks - Total block number to be written.
+
+ @retval EFI_SUCCESS - Datum are written into the Buffer.
+ @retval Others - Fail to write all the datum.
+
+**/
+EFI_STATUS
+NvmeWrite (
+ IN NVME_CONTEXT *Nvme,
+ IN UINT64 Buffer,
+ IN UINT64 Lba,
+ IN UINTN Blocks
+ );
+
+/**
+ Security send and receive commands.
+
+ @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
+ @param[in] SendCommand - The flag to indicate the command type, TRUE for Send command and FALSE for receive command
+ @param[in] SecurityProtocol - Security Protocol
+ @param[in] SpSpecific - Security Protocol Specific
+ @param[in] TransferLength - Transfer Length of Buffer (in bytes) - always a multiple of 512
+ @param[in,out] TransferBuffer - Address of Data to transfer
+
+ @return EFI_SUCCESS - Successfully create io submission queue.
+ @return others - Fail to send/receive commands.
+
+**/
+EFI_STATUS
+NvmeSecuritySendReceive (
+ IN NVME_CONTEXT *Nvme,
+ IN BOOLEAN SendCommand,
+ IN UINT8 SecurityProtocol,
+ IN UINT16 SpSpecific,
+ IN UINTN TransferLength,
+ IN OUT VOID *TransferBuffer
+ );
+
+#endif
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
new file mode 100644
index 000000000000..03376b9e6c9a
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
@@ -0,0 +1,815 @@
+/** @file
+ Header file for Registers and Structure definitions
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#ifndef __OPAL_PASSWORD_NVME_REG_H__
+#define __OPAL_PASSWORD_NVME_REG_H__
+
+//
+// PCI Header for PCIe root port configuration
+//
+#define NVME_PCIE_PCICMD 0x04
+#define NVME_PCIE_BNUM 0x18
+#define NVME_PCIE_SEC_BNUM 0x19
+#define NVME_PCIE_IOBL 0x1C
+#define NVME_PCIE_MBL 0x20
+#define NVME_PCIE_PMBL 0x24
+#define NVME_PCIE_PMBU32 0x28
+#define NVME_PCIE_PMLU32 0x2C
+#define NVME_PCIE_INTR 0x3C
+
+//
+// NVMe related definitions
+//
+#define PCI_CLASS_MASS_STORAGE_NVM 0x08 // mass storage sub-class non-volatile memory.
+#define PCI_IF_NVMHCI 0x02 // mass storage programming interface NVMHCI.
+
+#define NVME_ASQ_SIZE 1 // Number of admin submission queue entries, which is 0-based
+#define NVME_ACQ_SIZE 1 // Number of admin completion queue entries, which is 0-based
+
+#define NVME_CSQ_SIZE 63 // Number of I/O submission queue entries, which is 0-based
+#define NVME_CCQ_SIZE 63 // Number of I/O completion queue entries, which is 0-based
+
+#define NVME_MAX_IO_QUEUES 2 // Number of I/O queues supported by the driver, 1 for AQ, 1 for CQ
+
+#define NVME_CSQ_DEPTH (NVME_CSQ_SIZE+1)
+#define NVME_CCQ_DEPTH (NVME_CCQ_SIZE+1)
+#define NVME_PRP_SIZE (4) // Pages of PRP list
+
+#define NVME_CONTROLLER_ID 0
+
+//
+// Time out Value for Nvme transaction execution
+//
+#define NVME_GENERIC_TIMEOUT 5000000 ///< us
+#define NVME_CMD_WAIT 100 ///< us
+#define NVME_CMD_TIMEOUT 20000000 ///< us
+
+
+
+#define NVME_MEM_MAX_SIZE \
+ (( \
+ 1 /* Controller Data */ + \
+ 1 /* Identify Data */ + \
+ 1 /* ASQ */ + \
+ 1 /* ACQ */ + \
+ 1 /* SQs */ + \
+ 1 /* CQs */ + \
+ NVME_PRP_SIZE * NVME_CSQ_DEPTH /* PRPs */ + \
+ 1 /* SECURITY */ \
+ ) * EFI_PAGE_SIZE)
+
+
+//
+// controller register offsets
+//
+#define NVME_CAP_OFFSET 0x0000 // Controller Capabilities
+#define NVME_VER_OFFSET 0x0008 // Version
+#define NVME_INTMS_OFFSET 0x000c // Interrupt Mask Set
+#define NVME_INTMC_OFFSET 0x0010 // Interrupt Mask Clear
+#define NVME_CC_OFFSET 0x0014 // Controller Configuration
+#define NVME_CSTS_OFFSET 0x001c // Controller Status
+#define NVME_AQA_OFFSET 0x0024 // Admin Queue Attributes
+#define NVME_ASQ_OFFSET 0x0028 // Admin Submission Queue Base Address
+#define NVME_ACQ_OFFSET 0x0030 // Admin Completion Queue Base Address
+#define NVME_SQ0_OFFSET 0x1000 // Submission Queue 0 (admin) Tail Doorbell
+#define NVME_CQ0_OFFSET 0x1004 // Completion Queue 0 (admin) Head Doorbell
+
+//
+// These register offsets are defined as 0x1000 + (N * (4 << CAP.DSTRD))
+// Get the doorbell stride bit shift Value from the controller capabilities.
+//
+#define NVME_SQTDBL_OFFSET(QID, DSTRD) 0x1000 + ((2 * (QID)) * (4 << (DSTRD))) // Submission Queue y (NVM) Tail Doorbell
+#define NVME_CQHDBL_OFFSET(QID, DSTRD) 0x1000 + (((2 * (QID)) + 1) * (4 << (DSTRD))) // Completion Queue y (NVM) Head Doorbell
+
+
+#pragma pack(1)
+
+//
+// 3.1.1 Offset 00h: CAP - Controller Capabilities
+//
+typedef struct {
+ UINT16 Mqes; // Maximum Queue Entries Supported
+ UINT8 Cqr:1; // Contiguous Queues Required
+ UINT8 Ams:2; // Arbitration Mechanism Supported
+ UINT8 Rsvd1:5;
+ UINT8 To; // Timeout
+ UINT16 Dstrd:4;
+ UINT16 Rsvd2:1;
+ UINT16 Css:4; // Command Sets Supported
+ UINT16 Rsvd3:7;
+ UINT8 Mpsmin:4;
+ UINT8 Mpsmax:4;
+ UINT8 Rsvd4;
+} NVME_CAP;
+
+//
+// 3.1.2 Offset 08h: VS - Version
+//
+typedef struct {
+ UINT16 Mnr; // Minor version number
+ UINT16 Mjr; // Major version number
+} NVME_VER;
+
+//
+// 3.1.5 Offset 14h: CC - Controller Configuration
+//
+typedef struct {
+ UINT16 En:1; // Enable
+ UINT16 Rsvd1:3;
+ UINT16 Css:3; // Command Set Selected
+ UINT16 Mps:4; // Memory Page Size
+ UINT16 Ams:3; // Arbitration Mechanism Selected
+ UINT16 Shn:2; // Shutdown Notification
+ UINT8 Iosqes:4; // I/O Submission Queue Entry Size
+ UINT8 Iocqes:4; // I/O Completion Queue Entry Size
+ UINT8 Rsvd2;
+} NVME_CC;
+
+//
+// 3.1.6 Offset 1Ch: CSTS - Controller Status
+//
+typedef struct {
+ UINT32 Rdy:1; // Ready
+ UINT32 Cfs:1; // Controller Fatal Status
+ UINT32 Shst:2; // Shutdown Status
+ UINT32 Nssro:1; // NVM Subsystem Reset Occurred
+ UINT32 Rsvd1:27;
+} NVME_CSTS;
+
+//
+// 3.1.8 Offset 24h: AQA - Admin Queue Attributes
+//
+typedef struct {
+ UINT16 Asqs:12; // Submission Queue Size
+ UINT16 Rsvd1:4;
+ UINT16 Acqs:12; // Completion Queue Size
+ UINT16 Rsvd2:4;
+} NVME_AQA;
+
+//
+// 3.1.9 Offset 28h: ASQ - Admin Submission Queue Base Address
+//
+#define NVME_ASQ UINT64
+
+//
+// 3.1.10 Offset 30h: ACQ - Admin Completion Queue Base Address
+//
+#define NVME_ACQ UINT64
+
+//
+// 3.1.11 Offset (1000h + ((2y) * (4 << CAP.DSTRD))): SQyTDBL - Submission Queue y Tail Doorbell
+//
+typedef struct {
+ UINT16 Sqt;
+ UINT16 Rsvd1;
+} NVME_SQTDBL;
+
+//
+// 3.1.12 Offset (1000h + ((2y + 1) * (4 << CAP.DSTRD))): CQyHDBL - Completion Queue y Head Doorbell
+//
+typedef struct {
+ UINT16 Cqh;
+ UINT16 Rsvd1;
+} NVME_CQHDBL;
+
+//
+// NVM command set structures
+//
+// Read Command
+//
+typedef struct {
+ //
+ // CDW 10, 11
+ //
+ UINT64 Slba; /* Starting Sector Address */
+ //
+ // CDW 12
+ //
+ UINT16 Nlb; /* Number of Sectors */
+ UINT16 Rsvd1:10;
+ UINT16 Prinfo:4; /* Protection Info Check */
+ UINT16 Fua:1; /* Force Unit Access */
+ UINT16 Lr:1; /* Limited Retry */
+ //
+ // CDW 13
+ //
+ UINT32 Af:4; /* Access Frequency */
+ UINT32 Al:2; /* Access Latency */
+ UINT32 Sr:1; /* Sequential Request */
+ UINT32 In:1; /* Incompressible */
+ UINT32 Rsvd2:24;
+ //
+ // CDW 14
+ //
+ UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag */
+ //
+ // CDW 15
+ //
+ UINT16 Elbat; /* Expected Logical Block Application Tag */
+ UINT16 Elbatm; /* Expected Logical Block Application Tag Mask */
+} NVME_READ;
+
+//
+// Write Command
+//
+typedef struct {
+ //
+ // CDW 10, 11
+ //
+ UINT64 Slba; /* Starting Sector Address */
+ //
+ // CDW 12
+ //
+ UINT16 Nlb; /* Number of Sectors */
+ UINT16 Rsvd1:10;
+ UINT16 Prinfo:4; /* Protection Info Check */
+ UINT16 Fua:1; /* Force Unit Access */
+ UINT16 Lr:1; /* Limited Retry */
+ //
+ // CDW 13
+ //
+ UINT32 Af:4; /* Access Frequency */
+ UINT32 Al:2; /* Access Latency */
+ UINT32 Sr:1; /* Sequential Request */
+ UINT32 In:1; /* Incompressible */
+ UINT32 Rsvd2:24;
+ //
+ // CDW 14
+ //
+ UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
+ //
+ // CDW 15
+ //
+ UINT16 Lbat; /* Logical Block Application Tag */
+ UINT16 Lbatm; /* Logical Block Application Tag Mask */
+} NVME_WRITE;
+
+//
+// Flush
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Flush; /* Flush */
+} NVME_FLUSH;
+
+//
+// Write Uncorrectable command
+//
+typedef struct {
+ //
+ // CDW 10, 11
+ //
+ UINT64 Slba; /* Starting LBA */
+ //
+ // CDW 12
+ //
+ UINT32 Nlb:16; /* Number of Logical Blocks */
+ UINT32 Rsvd1:16;
+} NVME_WRITE_UNCORRECTABLE;
+
+//
+// Write Zeroes command
+//
+typedef struct {
+ //
+ // CDW 10, 11
+ //
+ UINT64 Slba; /* Starting LBA */
+ //
+ // CDW 12
+ //
+ UINT16 Nlb; /* Number of Logical Blocks */
+ UINT16 Rsvd1:10;
+ UINT16 Prinfo:4; /* Protection Info Check */
+ UINT16 Fua:1; /* Force Unit Access */
+ UINT16 Lr:1; /* Limited Retry */
+ //
+ // CDW 13
+ //
+ UINT32 Rsvd2;
+ //
+ // CDW 14
+ //
+ UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
+ //
+ // CDW 15
+ //
+ UINT16 Lbat; /* Logical Block Application Tag */
+ UINT16 Lbatm; /* Logical Block Application Tag Mask */
+} NVME_WRITE_ZEROES;
+
+//
+// Compare command
+//
+typedef struct {
+ //
+ // CDW 10, 11
+ //
+ UINT64 Slba; /* Starting LBA */
+ //
+ // CDW 12
+ //
+ UINT16 Nlb; /* Number of Logical Blocks */
+ UINT16 Rsvd1:10;
+ UINT16 Prinfo:4; /* Protection Info Check */
+ UINT16 Fua:1; /* Force Unit Access */
+ UINT16 Lr:1; /* Limited Retry */
+ //
+ // CDW 13
+ //
+ UINT32 Rsvd2;
+ //
+ // CDW 14
+ //
+ UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag */
+ //
+ // CDW 15
+ //
+ UINT16 Elbat; /* Expected Logical Block Application Tag */
+ UINT16 Elbatm; /* Expected Logical Block Application Tag Mask */
+} NVME_COMPARE;
+
+typedef union {
+ NVME_READ Read;
+ NVME_WRITE Write;
+ NVME_FLUSH Flush;
+ NVME_WRITE_UNCORRECTABLE WriteUncorrectable;
+ NVME_WRITE_ZEROES WriteZeros;
+ NVME_COMPARE Compare;
+} NVME_CMD;
+
+typedef struct {
+ UINT16 Mp; /* Maximum Power */
+ UINT8 Rsvd1; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT8 Mps:1; /* Max Power Scale */
+ UINT8 Nops:1; /* Non-Operational State */
+ UINT8 Rsvd2:6; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT32 Enlat; /* Entry Latency */
+ UINT32 Exlat; /* Exit Latency */
+ UINT8 Rrt:5; /* Relative Read Throughput */
+ UINT8 Rsvd3:3; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT8 Rrl:5; /* Relative Read Leatency */
+ UINT8 Rsvd4:3; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT8 Rwt:5; /* Relative Write Throughput */
+ UINT8 Rsvd5:3; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT8 Rwl:5; /* Relative Write Leatency */
+ UINT8 Rsvd6:3; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT8 Rsvd7[16]; /* Reserved as of Nvm Express 1.1 Spec */
+} NVME_PSDESCRIPTOR;
+
+//
+// Identify Controller Data
+//
+typedef struct {
+ //
+ // Controller Capabilities and Features 0-255
+ //
+ UINT16 Vid; /* PCI Vendor ID */
+ UINT16 Ssvid; /* PCI sub-system vendor ID */
+ UINT8 Sn[20]; /* Produce serial number */
+
+ UINT8 Mn[40]; /* Proeduct model number */
+ UINT8 Fr[8]; /* Firmware Revision */
+ UINT8 Rab; /* Recommended Arbitration Burst */
+ UINT8 Ieee_oiu[3]; /* Organization Unique Identifier */
+ UINT8 Cmic; /* Multi-interface Capabilities */
+ UINT8 Mdts; /* Maximum Data Transfer Size */
+ UINT8 Cntlid[2]; /* Controller ID */
+ UINT8 Rsvd1[176]; /* Reserved as of Nvm Express 1.1 Spec */
+ //
+ // Admin Command Set Attributes
+ //
+ UINT16 Oacs; /* Optional Admin Command Support */
+ UINT8 Acl; /* Abort Command Limit */
+ UINT8 Aerl; /* Async Event Request Limit */
+ UINT8 Frmw; /* Firmware updates */
+ UINT8 Lpa; /* Log Page Attributes */
+ UINT8 Elpe; /* Error Log Page Entries */
+ UINT8 Npss; /* Number of Power States Support */
+ UINT8 Avscc; /* Admin Vendor Specific Command Configuration */
+ UINT8 Apsta; /* Autonomous Power State Transition Attributes */
+ UINT8 Rsvd2[246]; /* Reserved as of Nvm Express 1.1 Spec */
+ //
+ // NVM Command Set Attributes
+ //
+ UINT8 Sqes; /* Submission Queue Entry Size */
+ UINT8 Cqes; /* Completion Queue Entry Size */
+ UINT16 Rsvd3; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT32 Nn; /* Number of Namespaces */
+ UINT16 Oncs; /* Optional NVM Command Support */
+ UINT16 Fuses; /* Fused Operation Support */
+ UINT8 Fna; /* Format NVM Attributes */
+ UINT8 Vwc; /* Volatile Write Cache */
+ UINT16 Awun; /* Atomic Write Unit Normal */
+ UINT16 Awupf; /* Atomic Write Unit Power Fail */
+ UINT8 Nvscc; /* NVM Vendor Specific Command Configuration */
+ UINT8 Rsvd4; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT16 Acwu; /* Atomic Compare & Write Unit */
+ UINT16 Rsvd5; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT32 Sgls; /* SGL Support */
+ UINT8 Rsvd6[164]; /* Reserved as of Nvm Express 1.1 Spec */
+ //
+ // I/O Command set Attributes
+ //
+ UINT8 Rsvd7[1344]; /* Reserved as of Nvm Express 1.1 Spec */
+ //
+ // Power State Descriptors
+ //
+ NVME_PSDESCRIPTOR PsDescriptor[32];
+
+ UINT8 VendorData[1024]; /* Vendor specific Data */
+} NVME_ADMIN_CONTROLLER_DATA;
+
+typedef struct {
+ UINT16 Security : 1; /* supports security send/receive commands */
+ UINT16 Format : 1; /* supports format nvm command */
+ UINT16 Firmware : 1; /* supports firmware activate/download commands */
+ UINT16 Oacs_rsvd : 13;
+ } OACS; // optional admin command support: NVME_ADMIN_CONTROLLER_DATA.Oacs
+
+typedef struct {
+ UINT16 Ms; /* Metadata Size */
+ UINT8 Lbads; /* LBA Data Size */
+ UINT8 Rp:2; /* Relative Performance */
+ #define LBAF_RP_BEST 00b
+ #define LBAF_RP_BETTER 01b
+ #define LBAF_RP_GOOD 10b
+ #define LBAF_RP_DEGRADED 11b
+ UINT8 Rsvd1:6; /* Reserved as of Nvm Express 1.1 Spec */
+} NVME_LBAFORMAT;
+
+//
+// Identify Namespace Data
+//
+typedef struct {
+ //
+ // NVM Command Set Specific
+ //
+ UINT64 Nsze; /* Namespace Size (total number of blocks in formatted namespace) */
+ UINT64 Ncap; /* Namespace Capacity (max number of logical blocks) */
+ UINT64 Nuse; /* Namespace Utilization */
+ UINT8 Nsfeat; /* Namespace Features */
+ UINT8 Nlbaf; /* Number of LBA Formats */
+ UINT8 Flbas; /* Formatted LBA Size */
+ UINT8 Mc; /* Metadata Capabilities */
+ UINT8 Dpc; /* End-to-end Data Protection capabilities */
+ UINT8 Dps; /* End-to-end Data Protection Type Settings */
+ UINT8 Nmic; /* Namespace Multi-path I/O and Namespace Sharing Capabilities */
+ UINT8 Rescap; /* Reservation Capabilities */
+ UINT8 Rsvd1[88]; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT64 Eui64; /* IEEE Extended Unique Identifier */
+ //
+ // LBA Format
+ //
+ NVME_LBAFORMAT LbaFormat[16];
+
+ UINT8 Rsvd2[192]; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT8 VendorData[3712]; /* Vendor specific Data */
+} NVME_ADMIN_NAMESPACE_DATA;
+
+//
+// NvmExpress Admin Identify Cmd
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Cns:2;
+ UINT32 Rsvd1:30;
+} NVME_ADMIN_IDENTIFY;
+
+//
+// NvmExpress Admin Create I/O Completion Queue
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Qid:16; /* Queue Identifier */
+ UINT32 Qsize:16; /* Queue Size */
+
+ //
+ // CDW 11
+ //
+ UINT32 Pc:1; /* Physically Contiguous */
+ UINT32 Ien:1; /* Interrupts Enabled */
+ UINT32 Rsvd1:14; /* reserved as of Nvm Express 1.1 Spec */
+ UINT32 Iv:16; /* Interrupt Vector */
+} NVME_ADMIN_CRIOCQ;
+
+//
+// NvmExpress Admin Create I/O Submission Queue
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Qid:16; /* Queue Identifier */
+ UINT32 Qsize:16; /* Queue Size */
+
+ //
+ // CDW 11
+ //
+ UINT32 Pc:1; /* Physically Contiguous */
+ UINT32 Qprio:2; /* Queue Priority */
+ UINT32 Rsvd1:13; /* Reserved as of Nvm Express 1.1 Spec */
+ UINT32 Cqid:16; /* Completion Queue ID */
+} NVME_ADMIN_CRIOSQ;
+
+//
+// NvmExpress Admin Delete I/O Completion Queue
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT16 Qid;
+ UINT16 Rsvd1;
+} NVME_ADMIN_DEIOCQ;
+
+//
+// NvmExpress Admin Delete I/O Submission Queue
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT16 Qid;
+ UINT16 Rsvd1;
+} NVME_ADMIN_DEIOSQ;
+
+//
+// NvmExpress Admin Security Send
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Resv:8; /* Reserve */
+ UINT32 Spsp:16; /* SP Specific */
+ UINT32 Secp:8; /* Security Protocol */
+
+ //
+ // CDW 11
+ //
+ UINT32 Tl; /* Transfer Length */
+} NVME_ADMIN_SECSEND;
+
+//
+// NvmExpress Admin Abort Command
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Sqid:16; /* Submission Queue identifier */
+ UINT32 Cid:16; /* Command Identifier */
+} NVME_ADMIN_ABORT;
+
+//
+// NvmExpress Admin Firmware Activate Command
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Fs:3; /* Submission Queue identifier */
+ UINT32 Aa:2; /* Command Identifier */
+ UINT32 Rsvd1:27;
+} NVME_ADMIN_FIRMWARE_ACTIVATE;
+
+//
+// NvmExpress Admin Firmware Image Download Command
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Numd; /* Number of Dwords */
+ //
+ // CDW 11
+ //
+ UINT32 Ofst; /* Offset */
+} NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD;
+
+//
+// NvmExpress Admin Get Features Command
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Fid:8; /* Feature Identifier */
+ UINT32 Sel:3; /* Select */
+ UINT32 Rsvd1:21;
+} NVME_ADMIN_GET_FEATURES;
+
+//
+// NvmExpress Admin Get Log Page Command
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Lid:8; /* Log Page Identifier */
+ #define LID_ERROR_INFO
+ #define LID_SMART_INFO
+ #define LID_FW_SLOT_INFO
+ UINT32 Rsvd1:8;
+ UINT32 Numd:12; /* Number of Dwords */
+ UINT32 Rsvd2:4; /* Reserved as of Nvm Express 1.1 Spec */
+} NVME_ADMIN_GET_LOG_PAGE;
+
+//
+// NvmExpress Admin Set Features Command
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Fid:8; /* Feature Identifier */
+ UINT32 Rsvd1:23;
+ UINT32 Sv:1; /* Save */
+} NVME_ADMIN_SET_FEATURES;
+
+//
+// NvmExpress Admin Format NVM Command
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Lbaf:4; /* LBA Format */
+ UINT32 Ms:1; /* Metadata Settings */
+ UINT32 Pi:3; /* Protection Information */
+ UINT32 Pil:1; /* Protection Information Location */
+ UINT32 Ses:3; /* Secure Erase Settings */
+ UINT32 Rsvd1:20;
+} NVME_ADMIN_FORMAT_NVM;
+
+//
+// NvmExpress Admin Security Receive Command
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Rsvd1:8;
+ UINT32 Spsp:16; /* SP Specific */
+ UINT32 Secp:8; /* Security Protocol */
+ //
+ // CDW 11
+ //
+ UINT32 Al; /* Allocation Length */
+} NVME_ADMIN_SECURITY_RECEIVE;
+
+//
+// NvmExpress Admin Security Send Command
+//
+typedef struct {
+ //
+ // CDW 10
+ //
+ UINT32 Rsvd1:8;
+ UINT32 Spsp:16; /* SP Specific */
+ UINT32 Secp:8; /* Security Protocol */
+ //
+ // CDW 11
+ //
+ UINT32 Tl; /* Transfer Length */
+} NVME_ADMIN_SECURITY_SEND;
+
+typedef union {
+ NVME_ADMIN_IDENTIFY Identify;
+ NVME_ADMIN_CRIOCQ CrIoCq;
+ NVME_ADMIN_CRIOSQ CrIoSq;
+ NVME_ADMIN_DEIOCQ DeIoCq;
+ NVME_ADMIN_DEIOSQ DeIoSq;
+ NVME_ADMIN_ABORT Abort;
+ NVME_ADMIN_FIRMWARE_ACTIVATE Activate;
+ NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD FirmwareImageDownload;
+ NVME_ADMIN_GET_FEATURES GetFeatures;
+ NVME_ADMIN_GET_LOG_PAGE GetLogPage;
+ NVME_ADMIN_SET_FEATURES SetFeatures;
+ NVME_ADMIN_FORMAT_NVM FormatNvm;
+ NVME_ADMIN_SECURITY_RECEIVE SecurityReceive;
+ NVME_ADMIN_SECURITY_SEND SecuritySend;
+} NVME_ADMIN_CMD;
+
+typedef struct {
+ UINT32 Cdw10;
+ UINT32 Cdw11;
+ UINT32 Cdw12;
+ UINT32 Cdw13;
+ UINT32 Cdw14;
+ UINT32 Cdw15;
+} NVME_RAW;
+
+typedef union {
+ NVME_ADMIN_CMD Admin; // Union of Admin commands
+ NVME_CMD Nvm; // Union of Nvm commands
+ NVME_RAW Raw;
+} NVME_PAYLOAD;
+
+//
+// Submission Queue
+//
+typedef struct {
+ //
+ // CDW 0, Common to all comnmands
+ //
+ UINT8 Opc; // Opcode
+ UINT8 Fuse:2; // Fused Operation
+ UINT8 Rsvd1:5;
+ UINT8 Psdt:1; // PRP or SGL for Data Transfer
+ UINT16 Cid; // Command Identifier
+
+ //
+ // CDW 1
+ //
+ UINT32 Nsid; // Namespace Identifier
+
+ //
+ // CDW 2,3
+ //
+ UINT64 Rsvd2;
+
+ //
+ // CDW 4,5
+ //
+ UINT64 Mptr; // Metadata Pointer
+
+ //
+ // CDW 6-9
+ //
+ UINT64 Prp[2]; // First and second PRP entries
+
+ NVME_PAYLOAD Payload;
+
+} NVME_SQ;
+
+//
+// Completion Queue
+//
+typedef struct {
+ //
+ // CDW 0
+ //
+ UINT32 Dword0;
+ //
+ // CDW 1
+ //
+ UINT32 Rsvd1;
+ //
+ // CDW 2
+ //
+ UINT16 Sqhd; // Submission Queue Head Pointer
+ UINT16 Sqid; // Submission Queue Identifier
+ //
+ // CDW 3
+ //
+ UINT16 Cid; // Command Identifier
+ UINT16 Pt:1; // Phase Tag
+ UINT16 Sc:8; // Status Code
+ UINT16 Sct:3; // Status Code Type
+ UINT16 Rsvd2:2;
+ UINT16 Mo:1; // More
+ UINT16 Dnr:1; // Retry
+} NVME_CQ;
+
+//
+// Nvm Express Admin cmd opcodes
+//
+#define NVME_ADMIN_DELIOSQ_OPC 0
+#define NVME_ADMIN_CRIOSQ_OPC 1
+#define NVME_ADMIN_DELIOCQ_OPC 4
+#define NVME_ADMIN_CRIOCQ_OPC 5
+#define NVME_ADMIN_IDENTIFY_OPC 6
+#define NVME_ADMIN_SECURITY_SEND_OPC 0x81
+#define NVME_ADMIN_SECURITY_RECV_OPC 0x82
+
+#define NVME_IO_FLUSH_OPC 0
+#define NVME_IO_WRITE_OPC 1
+#define NVME_IO_READ_OPC 2
+
+//
+// Offset from the beginning of private Data queue Buffer
+//
+#define NVME_ASQ_BUF_OFFSET EFI_PAGE_SIZE
+
+#pragma pack()
+
+#endif
+
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
new file mode 100644
index 000000000000..17fda410dc54
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
@@ -0,0 +1,65 @@
+/** @file
+ Opal Password common header file.
+
+Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _OPAL_PASSWORD_COMMON_H_
+#define _OPAL_PASSWORD_COMMON_H_
+
+#define OPAL_DEVICE_TYPE_UNKNOWN 0x0
+#define OPAL_DEVICE_TYPE_ATA 0x1
+#define OPAL_DEVICE_TYPE_NVME 0x2
+
+typedef struct {
+ UINT16 Segment;
+ UINT8 Bus;
+ UINT8 Device;
+ UINT8 Function;
+ UINT8 Reserved;
+} OPAL_PCI_DEVICE;
+
+typedef struct {
+ UINT16 Length;
+ OPAL_PCI_DEVICE Device;
+ UINT8 PasswordLength;
+ UINT8 Password[32];
+ UINT16 OpalBaseComId;
+ UINT32 BarAddr;
+} OPAL_DEVICE_COMMON;
+
+#define OPAL_DEVICE_ATA_GUID { 0xcb934fe1, 0xb8cd, 0x46b1, { 0xa0, 0x58, 0xdd, 0xcb, 0x7, 0xb7, 0xb4, 0x17 } }
+
+typedef struct {
+ UINT16 Length;
+ OPAL_PCI_DEVICE Device;
+ UINT8 PasswordLength;
+ UINT8 Password[32];
+ UINT16 OpalBaseComId;
+ UINT32 BarAddr;
+ UINT16 Port;
+ UINT16 PortMultiplierPort;
+} OPAL_DEVICE_ATA;
+
+#define OPAL_DEVICE_NVME_GUID { 0xde116925, 0xaf7f, 0x42d9, { 0x83, 0xc0, 0x7e, 0xd6, 0x26, 0x59, 0x0, 0xfb } }
+
+typedef struct {
+ UINT16 Length;
+ OPAL_PCI_DEVICE Device;
+ UINT8 PasswordLength;
+ UINT8 Password[32];
+ UINT16 OpalBaseComId;
+ UINT32 BarAddr;
+ UINT32 NvmeNamespaceId;
+ OPAL_PCI_DEVICE PciBridgeNode[0];
+} OPAL_DEVICE_NVME;
+
+#endif // _OPAL_PASSWORD_COMMON_H_
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
new file mode 100644
index 000000000000..0ac550a72873
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
@@ -0,0 +1,81 @@
+## @file
+# This is a OpalPasswordDxe driver.
+#
+# This module is used to Management the Opal feature
+# for Opal supported devices.
+#
+# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+[Defines]
+ INF_VERSION = 0x00010007
+ BASE_NAME = OpalPasswordDxe
+ FILE_GUID = E3E4048D-6C0C-43E4-AE1C-FFB579D8EF41
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = EfiDriverEntryPoint
+ UNLOAD_IMAGE = OpalEfiDriverUnload
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64 IPF EBC
+#
+
+[Sources]
+ OpalDriver.c
+ OpalDriver.h
+ OpalPasswordCommon.h
+ OpalHii.c
+ OpalHii.h
+ OpalHiiCallbacks.c
+ OpalHiiFormValues.h
+ OpalHiiFormStrings.uni
+ OpalPasswordForm.vfr
+ ComponentName.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ SecurityPkg/SecurityPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ MemoryAllocationLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ UefiRuntimeServicesTableLib
+ DxeServicesTableLib
+ UefiHiiServicesLib
+ BaseMemoryLib
+ DebugLib
+ HiiLib
+ PrintLib
+ DevicePathLib
+ UefiLib
+ TcgStorageOpalLib
+ Tcg2PhysicalPresenceLib
+ PciLib
+ S3BootScriptLib
+ LockBoxLib
+
+[Protocols]
+ gEfiHiiConfigAccessProtocolGuid ## PRODUCES
+ gEfiStorageSecurityCommandProtocolGuid ## CONSUMES
+ gEfiComponentNameProtocolGuid ## PRODUCES
+ gEfiComponentName2ProtocolGuid ## PRODUCES
+ gEfiBlockIoProtocolGuid ## CONSUMES
+ gEfiPciIoProtocolGuid ## CONSUMES
+ gEfiDevicePathToTextProtocolGuid ## CONSUMES
+
+[Guids]
+ gEfiEndOfDxeEventGroupGuid ## CONSUMES ## Event
+
+[Depex]
+ gEfiHiiStringProtocolGuid AND gEfiHiiDatabaseProtocolGuid
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
new file mode 100644
index 000000000000..cba388723305
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
@@ -0,0 +1,309 @@
+/** @file
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include "OpalHiiFormValues.h"
+
+
+#define EFI_HII_PLATFORM_SETUP_FORMSET_GUID \
+ { 0x93039971, 0x8545, 0x4b04, { 0xb4, 0x5e, 0x32, 0xeb, 0x83, 0x26, 0x4, 0xe } }
+
+formset
+ guid = SETUP_FORMSET_GUID,
+ title = STRING_TOKEN(STR_OPAL),
+ help = STRING_TOKEN(STR_FORM_SET_HELP),
+ classguid = EFI_HII_PLATFORM_SETUP_FORMSET_GUID,
+
+ // Define a Buffer Storage (EFI_IFR_VARSTORE) that will be filled
+ // out initially through extractConfig call
+ varstore OPAL_HII_CONFIGURATION, // This is the Data structure type
+ name = OpalHiiConfig, // Define referenced name in vfr
+ guid = SETUP_VARIABLE_GUID; // GUID of this Buffer storage
+
+form formid = FORMID_VALUE_MAIN_MENU,
+ title = STRING_TOKEN(STR_OPAL);
+
+ //CONFIG_VARIABLE(HII_KEY(HII_KEY_ID_VAR_SUPPORTED_DISKS), SupportedDisks, 0x0, 0xFFFF);
+ suppressif TRUE;
+ numeric
+ name = SupportedDisks,
+ varid = OpalHiiConfig.SupportedDisks,
+ prompt = STRING_TOKEN(STR_NULL),
+ help = STRING_TOKEN(STR_NULL),
+ flags = INTERACTIVE,
+ key = 0x8002,
+ minimum = 0x0,
+ maximum = 0xFFFF,
+ endnumeric;
+ endif;
+
+ subtitle text = STRING_TOKEN(STR_MAIN_OPAL_VERSION);
+
+ subtitle text = STRING_TOKEN(STR_NULL);
+
+ subtitle text = STRING_TOKEN(STR_MAIN_PHY_DISKS_LBL);
+
+ //DISK( 0 );
+ suppressif ( questionref(SupportedDisks) & ( 0x1 ) ) == 0;
+ goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
+ prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_0 ),
+ help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
+ flags = INTERACTIVE,
+ key = 0x8001;
+ endif;
+
+ //DISK( 1 );
+ suppressif ( questionref(SupportedDisks) & ( 0x2 ) ) == 0;
+ goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
+ prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_1 ),
+ help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
+ flags = INTERACTIVE,
+ key = 0x8101;
+ endif;
+
+ //DISK( 2 );
+ suppressif ( questionref(SupportedDisks) & ( 0x4 ) ) == 0;
+ goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
+ prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_2 ),
+ help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
+ flags = INTERACTIVE,
+ key = 0x8201;
+ endif;
+
+ //DISK( 3 );
+ suppressif ( questionref(SupportedDisks) & ( 0x8 ) ) == 0;
+ goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
+ prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_3 ),
+ help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
+ flags = INTERACTIVE,
+ key = 0x8301;
+ endif;
+
+ //DISK( 4 );
+ suppressif ( questionref(SupportedDisks) & ( 0x10 ) ) == 0;
+ goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
+ prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_4 ),
+ help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
+ flags = INTERACTIVE,
+ key = 0x8401;
+ endif;
+
+ //DISK( 5 );
+ suppressif ( questionref(SupportedDisks) & ( 0x20 ) ) == 0;
+ goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
+ prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_5 ),
+ help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
+ flags = INTERACTIVE,
+ key = 0x8501;
+ endif;
+
+ //No disks on system
+ suppressif ideqval OpalHiiConfig.NumDisks > 0;
+ text
+ help = STRING_TOKEN(STR_NULL),
+ text = STRING_TOKEN(STR_MAIN_NO_DISKS_PRESENT_LBL);
+ endif;
+
+ subtitle text = STRING_TOKEN(STR_NULL);
+
+ grayoutif TRUE;
+ text
+ help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
+ text = STRING_TOKEN(STR_BLOCKSID_STATUS);
+ text
+ help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
+ text = STRING_TOKEN(STR_BLOCKSID_STATUS1);
+ text
+ help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
+ text = STRING_TOKEN(STR_BLOCKSID_STATUS2);
+ text
+ help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
+ text = STRING_TOKEN(STR_BLOCKSID_STATUS3);
+ subtitle text = STRING_TOKEN(STR_NULL);
+ endif;
+
+ oneof varid = OpalHiiConfig.EnableBlockSid,
+ questionid = 0x8004,
+ prompt = STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID),
+ help = STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_HELP),
+ flags = INTERACTIVE,
+ option text = STRING_TOKEN(STR_NONE), value = 0, flags = DEFAULT | MANUFACTURING | RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_ENABLED), value = 1, flags = RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_DISABLED), value = 2, flags = RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_TRUE), value = 3, flags = RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_FALSE), value = 4, flags = RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_TRUE), value = 5, flags = RESET_REQUIRED;
+ option text = STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_FALSE), value = 6, flags = RESET_REQUIRED;
+ endoneof;
+
+
+
+endform; // MAIN MENU FORM
+
+//
+///////////////// DISK INFO FORM /////////////////
+//
+form formid = FORMID_VALUE_DISK_INFO_FORM_MAIN,
+ title = STRING_TOKEN(STR_OPAL);
+
+ suppressif TRUE;
+ numeric
+ name = SelectedDiskAvailableActions,
+ varid = OpalHiiConfig.SelectedDiskAvailableActions,
+ prompt = STRING_TOKEN(STR_NULL),
+ help = STRING_TOKEN(STR_NULL),
+ flags = INTERACTIVE,
+ key = 0x8003,
+ minimum = 0x0,
+ maximum = 0xFFFF,
+ endnumeric;
+ endif;
+
+ suppressif TRUE;
+ checkbox varid = OpalHiiConfig.KeepUserDataForced,
+ prompt = STRING_TOKEN(STR_NULL),
+ help = STRING_TOKEN(STR_NULL),
+ endcheckbox;
+ endif;
+
+ subtitle text = STRING_TOKEN(STR_MAIN_OPAL_VERSION);
+
+ subtitle text = STRING_TOKEN(STR_NULL);
+
+ text
+ help = STRING_TOKEN(STR_NULL),
+ text = STRING_TOKEN(STR_DISK_INFO_SELECTED_DISK_NAME);
+
+ subtitle text = STRING_TOKEN(STR_NULL);
+
+ subtitle text = STRING_TOKEN(STR_OPAL_REQUESTS_LBL);
+
+ suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_SET_ADMIN_PWD ) == 0;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
+ checkbox varid = OpalHiiConfig.OpalRequest.SetAdminPwd,
+ prompt = STRING_TOKEN(STR_DISK_INFO_SET_ADMIN_PSWD),
+ help = STRING_TOKEN(STR_DISK_INFO_SET_ADMIN_PSWD_HELP),
+ flags = INTERACTIVE | RESET_REQUIRED,
+ key = 0x8005,
+ endcheckbox;
+ endif;
+ endif;
+ endif;
+
+ suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_SET_USER_PWD ) == 0;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.DisableUser == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
+ checkbox varid = OpalHiiConfig.OpalRequest.SetUserPwd,
+ prompt = STRING_TOKEN(STR_DISK_INFO_SET_USER_PSWD),
+ help = STRING_TOKEN(STR_DISK_INFO_SET_USER_PSWD_HELP),
+ flags = INTERACTIVE | RESET_REQUIRED,
+ key = 0x8006,
+ endcheckbox;
+ endif;
+ endif;
+ endif;
+ endif;
+
+ suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_SECURE_ERASE ) == 0;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
+ checkbox varid = OpalHiiConfig.OpalRequest.SecureErase,
+ prompt = STRING_TOKEN(STR_DISK_INFO_SECURE_ERASE),
+ help = STRING_TOKEN(STR_DISK_INFO_SECURE_ERASE_HELP),
+ flags = INTERACTIVE | RESET_REQUIRED,
+ key = 0x8007,
+ endcheckbox;
+ endif;
+ endif;
+ endif;
+
+ suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_REVERT ) == 0;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.SetAdminPwd == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.SetUserPwd == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.SecureErase == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.DisableUser == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
+ checkbox varid = OpalHiiConfig.OpalRequest.Revert,
+ prompt = STRING_TOKEN(STR_DISK_INFO_REVERT),
+ help = STRING_TOKEN(STR_DISK_INFO_REVERT_HELP),
+ flags = INTERACTIVE | RESET_REQUIRED,
+ key = 0x8008,
+ endcheckbox;
+ endif;
+ endif;
+ endif;
+ endif;
+ endif;
+ endif;
+
+ suppressif ideqval OpalHiiConfig.OpalRequest.Revert == 0;
+ grayoutif ideqval OpalHiiConfig.KeepUserDataForced == 1;
+ checkbox varid = OpalHiiConfig.OpalRequest.KeepUserData,
+ prompt = STRING_TOKEN(STR_KEEP_USER_DATA_PROMPT),
+ help = STRING_TOKEN(STR_KEEP_USER_DATA_HELP),
+ flags = INTERACTIVE | RESET_REQUIRED,
+ key = 0x8009,
+ endcheckbox;
+ endif;
+ endif;
+
+ suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_PSID_REVERT ) == 0;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.SetAdminPwd == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.SetUserPwd == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.SecureErase == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.DisableUser == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.EnableFeature == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
+ checkbox varid = OpalHiiConfig.OpalRequest.PsidRevert,
+ prompt = STRING_TOKEN(STR_DISK_INFO_PSID_REVERT),
+ help = STRING_TOKEN(STR_DISK_INFO_PSID_REVERT_HELP),
+ flags = INTERACTIVE | RESET_REQUIRED,
+ key = 0x800A,
+ endcheckbox;
+ endif;
+ endif;
+ endif;
+ endif;
+ endif;
+ endif;
+ endif;
+
+ suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_DISABLE_USER ) == 0;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.SetUserPwd == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
+ checkbox varid = OpalHiiConfig.OpalRequest.DisableUser,
+ prompt = STRING_TOKEN(STR_DISK_INFO_DISABLE_USER),
+ help = STRING_TOKEN(STR_DISK_INFO_DISABLE_USER_HELP),
+ flags = INTERACTIVE | RESET_REQUIRED,
+ key = 0x800B,
+ endcheckbox;
+ endif;
+ endif;
+ endif;
+ endif;
+
+ suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_ENABLE_FEATURE ) == 0;
+ grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
+ checkbox varid = OpalHiiConfig.OpalRequest.EnableFeature,
+ prompt = STRING_TOKEN(STR_DISK_INFO_ENABLE_FEATURE),
+ help = STRING_TOKEN(STR_DISK_INFO_ENABLE_FEATURE_HELP),
+ flags = INTERACTIVE | RESET_REQUIRED,
+ key = 0x800C,
+ endcheckbox;
+ endif;
+ endif;
+
+endform; // DISK INFO FORM
+
+endformset;
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
new file mode 100644
index 000000000000..1788b2ad3339
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
@@ -0,0 +1,940 @@
+/** @file
+ Opal Password PEI driver which is used to unlock Opal Password for S3.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "OpalPasswordPei.h"
+
+EFI_GUID mOpalDeviceAtaGuid = OPAL_DEVICE_ATA_GUID;
+EFI_GUID mOpalDeviceNvmeGuid = OPAL_DEVICE_NVME_GUID;
+
+#define OPAL_PCIE_ROOTPORT_SAVESIZE (0x40)
+#define STORE_INVALID_ROOTPORT_INDEX ((UINT8) -1)
+
+/**
+ Get IOMMU PPI.
+
+ @return Pointer to IOMMU PPI.
+
+**/
+EDKII_IOMMU_PPI *
+GetIoMmu (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ EDKII_IOMMU_PPI *IoMmu;
+
+ IoMmu = NULL;
+ Status = PeiServicesLocatePpi (
+ &gEdkiiIoMmuPpiGuid,
+ 0,
+ NULL,
+ (VOID **) &IoMmu
+ );
+ if (!EFI_ERROR (Status) && (IoMmu != NULL)) {
+ return IoMmu;
+ }
+
+ return NULL;
+}
+
+/**
+ Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
+ OperationBusMasterCommonBuffer64 mapping.
+
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+IoMmuAllocateBuffer (
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ )
+{
+ EFI_STATUS Status;
+ UINTN NumberOfBytes;
+ EFI_PHYSICAL_ADDRESS HostPhyAddress;
+ EDKII_IOMMU_PPI *IoMmu;
+
+ *HostAddress = NULL;
+ *DeviceAddress = 0;
+ *Mapping = NULL;
+
+ IoMmu = GetIoMmu ();
+
+ if (IoMmu != NULL) {
+ Status = IoMmu->AllocateBuffer (
+ IoMmu,
+ EfiBootServicesData,
+ Pages,
+ HostAddress,
+ 0
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ NumberOfBytes = EFI_PAGES_TO_SIZE (Pages);
+ Status = IoMmu->Map (
+ IoMmu,
+ EdkiiIoMmuOperationBusMasterCommonBuffer,
+ *HostAddress,
+ &NumberOfBytes,
+ DeviceAddress,
+ Mapping
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
+ *HostAddress = NULL;
+ return EFI_OUT_OF_RESOURCES;
+ }
+ Status = IoMmu->SetAttribute (
+ IoMmu,
+ *Mapping,
+ EDKII_IOMMU_ACCESS_READ | EDKII_IOMMU_ACCESS_WRITE
+ );
+ if (EFI_ERROR (Status)) {
+ IoMmu->Unmap (IoMmu, *Mapping);
+ IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
+ *Mapping = NULL;
+ *HostAddress = NULL;
+ return Status;
+ }
+ } else {
+ Status = PeiServicesAllocatePages (
+ EfiBootServicesData,
+ Pages,
+ &HostPhyAddress
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ *HostAddress = (VOID *) (UINTN) HostPhyAddress;
+ *DeviceAddress = HostPhyAddress;
+ *Mapping = NULL;
+ }
+ return Status;
+}
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuFreeBuffer (
+ IN UINTN Pages,
+ IN VOID *HostAddress,
+ IN VOID *Mapping
+ )
+{
+ EDKII_IOMMU_PPI *IoMmu;
+
+ IoMmu = GetIoMmu ();
+
+ if (IoMmu != NULL) {
+ IoMmu->SetAttribute (IoMmu, Mapping, 0);
+ IoMmu->Unmap (IoMmu, Mapping);
+ IoMmu->FreeBuffer (IoMmu, Pages, HostAddress);
+ } else {
+ PeiServicesFreePages (
+ (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress,
+ Pages
+ );
+ }
+}
+
+/**
+ Provide IO action support.
+
+ @param[in] PeiDev The opal device need to perform trusted IO.
+ @param[in] IoType OPAL_IO_TYPE indicating whether to perform a Trusted Send or Trusted Receive.
+ @param[in] SecurityProtocol Security Protocol
+ @param[in] SpSpecific Security Protocol Specific
+ @param[in] TransferLength Transfer Length of Buffer (in bytes) - always a multiple of 512
+ @param[in] Buffer Address of Data to transfer
+
+ @retval EFI_SUCCESS Perform the IO action success.
+ @retval Others Perform the IO action failed.
+
+**/
+EFI_STATUS
+PerformTrustedIo (
+ OPAL_PEI_DEVICE *PeiDev,
+ OPAL_IO_TYPE IoType,
+ UINT8 SecurityProtocol,
+ UINT16 SpSpecific,
+ UINTN TransferLength,
+ VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINTN BufferSizeBlocks;
+ EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
+ OPAL_DEVICE_ATA *DevInfoAta;
+ AHCI_CONTEXT *AhciContext;
+ NVME_CONTEXT *NvmeContext;
+
+ Status = EFI_DEVICE_ERROR;
+ if (PeiDev->DeviceType == OPAL_DEVICE_TYPE_ATA) {
+ DevInfoAta = (OPAL_DEVICE_ATA *) PeiDev->Device;
+ AhciContext = (AHCI_CONTEXT *) PeiDev->Context;
+
+ BufferSizeBlocks = TransferLength / 512;
+
+ ZeroMem( &AtaCommandBlock, sizeof( EFI_ATA_COMMAND_BLOCK ) );
+ AtaCommandBlock.AtaCommand = ( IoType == OpalSend ) ? ATA_COMMAND_TRUSTED_SEND : ATA_COMMAND_TRUSTED_RECEIVE;
+ AtaCommandBlock.AtaSectorCount = ( UINT8 )BufferSizeBlocks;
+ AtaCommandBlock.AtaSectorNumber = ( UINT8 )( BufferSizeBlocks >> 8 );
+ AtaCommandBlock.AtaFeatures = SecurityProtocol;
+ AtaCommandBlock.AtaCylinderLow = ( UINT8 )( SpSpecific >> 8 );
+ AtaCommandBlock.AtaCylinderHigh = ( UINT8 )( SpSpecific );
+ AtaCommandBlock.AtaDeviceHead = ATA_DEVICE_LBA;
+
+
+ ZeroMem( AhciContext->Buffer, HDD_PAYLOAD );
+ ASSERT( TransferLength <= HDD_PAYLOAD );
+
+ if (IoType == OpalSend) {
+ CopyMem( AhciContext->Buffer, Buffer, TransferLength );
+ }
+
+ Status = AhciPioTransfer(
+ AhciContext,
+ (UINT8) DevInfoAta->Port,
+ (UINT8) DevInfoAta->PortMultiplierPort,
+ NULL,
+ 0,
+ ( IoType == OpalSend ) ? FALSE : TRUE, // i/o direction
+ &AtaCommandBlock,
+ NULL,
+ AhciContext->Buffer,
+ (UINT32)TransferLength,
+ ATA_TIMEOUT
+ );
+
+ if (IoType == OpalRecv) {
+ CopyMem( Buffer, AhciContext->Buffer, TransferLength );
+ }
+ } else if (PeiDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
+ NvmeContext = (NVME_CONTEXT *) PeiDev->Context;
+ Status = NvmeSecuritySendReceive (
+ NvmeContext,
+ IoType == OpalSend,
+ SecurityProtocol,
+ SwapBytes16(SpSpecific),
+ TransferLength,
+ Buffer
+ );
+ } else {
+ DEBUG((DEBUG_ERROR, "DeviceType(%x) not support.\n", PeiDev->DeviceType));
+ }
+
+ return Status;
+}
+
+/**
+ Send a security protocol command to a device that receives data and/or the result
+ of one or more commands sent by SendData.
+
+ The ReceiveData function sends a security protocol command to the given MediaId.
+ The security protocol command sent is defined by SecurityProtocolId and contains
+ the security protocol specific data SecurityProtocolSpecificData. The function
+ returns the data from the security protocol command in PayloadBuffer.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL IN command defined in SPC-4.
+
+ For devices supporting the ATA command set, the security protocol command is sent
+ using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize
+ is non-zero.
+
+ If the PayloadBufferSize is zero, the security protocol command is sent using the
+ Trusted Non-Data command defined in ATA8-ACS.
+
+ If PayloadBufferSize is too small to store the available data from the security
+ protocol command, the function shall copy PayloadBufferSize bytes into the
+ PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
+
+ If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
+ the function shall return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function shall
+ return EFI_UNSUPPORTED. If there is no media in the device, the function returns
+ EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
+ the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall
+ return EFI_SUCCESS. If the security protocol command completes with an error, the
+ function shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT
+ if the time required to execute the receive data command
+ is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command. The caller is responsible for having
+ either implicit or explicit ownership of the buffer.
+ @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
+ data written to the payload data buffer.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
+ data from the device. The PayloadBuffer contains the truncated data.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
+ PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+SecurityReceiveData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ OUT VOID *PayloadBuffer,
+ OUT UINTN *PayloadTransferSize
+ )
+{
+ OPAL_PEI_DEVICE *PeiDev;
+
+ PeiDev = OPAL_PEI_DEVICE_FROM_THIS (This);
+ if (PeiDev == NULL) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return PerformTrustedIo (
+ PeiDev,
+ OpalRecv,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ PayloadBufferSize,
+ PayloadBuffer
+ );
+}
+
+/**
+ Send a security protocol command to a device.
+
+ The SendData function sends a security protocol command containing the payload
+ PayloadBuffer to the given MediaId. The security protocol command sent is
+ defined by SecurityProtocolId and contains the security protocol specific data
+ SecurityProtocolSpecificData. If the underlying protocol command requires a
+ specific padding for the command payload, the SendData function shall add padding
+ bytes to the command payload to satisfy the padding requirements.
+
+ For devices supporting the SCSI command set, the security protocol command is sent
+ using the SECURITY PROTOCOL OUT command defined in SPC-4.
+
+ For devices supporting the ATA command set, the security protocol command is sent
+ using one of the TRUSTED SEND commands defined in ATA8-ACS if PayloadBufferSize
+ is non-zero. If the PayloadBufferSize is zero, the security protocol command is
+ sent using the Trusted Non-Data command defined in ATA8-ACS.
+
+ If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
+ return EFI_INVALID_PARAMETER.
+
+ If the given MediaId does not support security protocol commands, the function
+ shall return EFI_UNSUPPORTED. If there is no media in the device, the function
+ returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
+ device, the function returns EFI_MEDIA_CHANGED.
+
+ If the security protocol fails to complete within the Timeout period, the function
+ shall return EFI_TIMEOUT.
+
+ If the security protocol command completes without an error, the function shall return
+ EFI_SUCCESS. If the security protocol command completes with an error, the function
+ shall return EFI_DEVICE_ERROR.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to receive data from.
+ @param Timeout The timeout, in 100ns units, to use for the execution
+ of the security protocol command. A Timeout value of 0
+ means that this function will wait indefinitely for the
+ security protocol command to execute. If Timeout is greater
+ than zero, then this function will return EFI_TIMEOUT
+ if the time required to execute the send data command
+ is greater than Timeout.
+ @param SecurityProtocolId The value of the "Security Protocol" parameter of
+ the security protocol command to be sent.
+ @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
+ of the security protocol command to be sent.
+ @param PayloadBufferSize Size in bytes of the payload data buffer.
+ @param PayloadBuffer A pointer to a destination buffer to store the security
+ protocol command specific payload data for the security
+ protocol command.
+
+ @retval EFI_SUCCESS The security protocol command completed successfully.
+ @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
+ @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
+ @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the security
+ protocol command to execute.
+
+**/
+EFI_STATUS
+EFIAPI
+SecuritySendData (
+ IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN UINT64 Timeout,
+ IN UINT8 SecurityProtocolId,
+ IN UINT16 SecurityProtocolSpecificData,
+ IN UINTN PayloadBufferSize,
+ IN VOID *PayloadBuffer
+ )
+{
+ OPAL_PEI_DEVICE *PeiDev;
+
+ PeiDev = OPAL_PEI_DEVICE_FROM_THIS (This);
+ if (PeiDev == NULL) {
+ return EFI_DEVICE_ERROR;
+ }
+
+ return PerformTrustedIo (
+ PeiDev,
+ OpalSend,
+ SecurityProtocolId,
+ SecurityProtocolSpecificData,
+ PayloadBufferSize,
+ PayloadBuffer
+ );
+
+}
+
+/**
+ Save/Restore RootPort configuration space.
+
+ @param[in] DevInfoNvme Pointer to NVMe device info.
+ @param[in] SaveAction TRUE: Save, FALSE: Restore
+ @param[in,out] PcieConfBufferList Configuration space data buffer for save/restore
+
+ @return PCIE base address of this RootPort
+**/
+UINTN
+SaveRestoreRootportConfSpace (
+ IN OPAL_DEVICE_NVME *DevInfoNvme,
+ IN BOOLEAN SaveAction,
+ IN OUT UINT8 **PcieConfBufferList
+ )
+{
+ UINTN RpBase;
+ UINTN Length;
+ OPAL_PCI_DEVICE *DevNode;
+ UINT8 *StorePcieConfData;
+ UINTN Index;
+
+ Length = 0;
+ Index = 0;
+ RpBase = 0;
+
+ while (sizeof (OPAL_DEVICE_NVME) + Length < DevInfoNvme->Length) {
+ DevNode = (OPAL_PCI_DEVICE *)((UINT8*)DevInfoNvme->PciBridgeNode + Length);
+ RpBase = PCI_LIB_ADDRESS (DevNode->Bus, DevNode->Device, DevNode->Function, 0x0);
+
+ if (PcieConfBufferList != NULL) {
+ if (SaveAction) {
+ StorePcieConfData = (UINT8 *) AllocateZeroPool (OPAL_PCIE_ROOTPORT_SAVESIZE);
+ ASSERT (StorePcieConfData != NULL);
+ OpalPciRead (StorePcieConfData, RpBase, OPAL_PCIE_ROOTPORT_SAVESIZE);
+ PcieConfBufferList[Index] = StorePcieConfData;
+ } else {
+ // Skip PCIe Command & Status registers
+ StorePcieConfData = PcieConfBufferList[Index];
+ OpalPciWrite (RpBase, StorePcieConfData, 4);
+ OpalPciWrite (RpBase + 8, StorePcieConfData + 8, OPAL_PCIE_ROOTPORT_SAVESIZE - 8);
+
+ FreePool (StorePcieConfData);
+ }
+ }
+
+ Length += sizeof (OPAL_PCI_DEVICE);
+ Index ++;
+ }
+
+ return RpBase;
+}
+
+/**
+ Configure RootPort for downstream PCIe NAND devices.
+
+ @param[in] RpBase - PCIe configuration space address of this RootPort
+ @param[in] BusNumber - Bus number
+ @param[in] MemoryBase - Memory base address
+ @param[in] MemoryLength - Memory size
+
+**/
+VOID
+ConfigureRootPortForPcieNand (
+ IN UINTN RpBase,
+ IN UINTN BusNumber,
+ IN UINT32 MemoryBase,
+ IN UINT32 MemoryLength
+ )
+{
+ UINT32 MemoryLimit;
+
+ DEBUG ((DEBUG_INFO, "ConfigureRootPortForPcieNand, BusNumber: %x, MemoryBase: %x, MemoryLength: %x\n",
+ BusNumber, MemoryBase, MemoryLength));
+
+ if (MemoryLength == 0) {
+ MemoryLimit = MemoryBase;
+ } else {
+ MemoryLimit = MemoryBase + MemoryLength + 0xFFFFF; // 1M
+ }
+
+ ///
+ /// Configue PCIE configuration space for RootPort
+ ///
+ PciWrite8 (RpBase + NVME_PCIE_BNUM + 1, (UINT8) BusNumber); // Secondary Bus Number registers
+ PciWrite8 (RpBase + NVME_PCIE_BNUM + 2, (UINT8) BusNumber); // Subordinate Bus Number registers
+ PciWrite8 (RpBase + NVME_PCIE_IOBL, 0xFF); // I/O Base registers
+ PciWrite8 (RpBase + NVME_PCIE_IOBL + 1, 0x00); // I/O Limit registers
+ PciWrite16 (RpBase + NVME_PCIE_MBL, (UINT16) RShiftU64 ((UINTN)MemoryBase, 16)); // Memory Base register
+ PciWrite16 (RpBase + NVME_PCIE_MBL + 2, (UINT16) RShiftU64 ((UINTN)MemoryLimit, 16)); // Memory Limit register
+ PciWrite16 (RpBase + NVME_PCIE_PMBL, 0xFFFF); // Prefetchable Memory Base registers
+ PciWrite16 (RpBase + NVME_PCIE_PMBL + 2, 0x0000); // Prefetchable Memory Limit registers
+ PciWrite32 (RpBase + NVME_PCIE_PMBU32, 0xFFFFFFFF); // Prefetchable Memory Upper Base registers
+ PciWrite32 (RpBase + NVME_PCIE_PMLU32, 0x00000000); // Prefetchable Memory Upper Limit registers
+}
+
+/**
+
+ The function returns whether or not the device is Opal Locked.
+ TRUE means that the device is partially or fully locked.
+ This will perform a Level 0 Discovery and parse the locking feature descriptor
+
+ @param[in] OpalDev Opal object to determine if locked.
+ @param[out] BlockSidSupported Whether device support BlockSid feature.
+
+**/
+BOOLEAN
+IsOpalDeviceLocked(
+ OPAL_PEI_DEVICE *OpalDev,
+ BOOLEAN *BlockSidSupported
+ )
+{
+ OPAL_SESSION Session;
+ OPAL_DISK_SUPPORT_ATTRIBUTE SupportedAttributes;
+ TCG_LOCKING_FEATURE_DESCRIPTOR LockingFeature;
+ UINT16 OpalBaseComId;
+ TCG_RESULT Ret;
+
+ Session.Sscp = &OpalDev->Sscp;
+ Session.MediaId = 0;
+
+ Ret = OpalGetSupportedAttributesInfo (&Session, &SupportedAttributes, &OpalBaseComId);
+ if (Ret != TcgResultSuccess) {
+ return FALSE;
+ }
+
+ Session.OpalBaseComId = OpalBaseComId;
+ *BlockSidSupported = SupportedAttributes.BlockSid == 1 ? TRUE : FALSE;
+
+ Ret = OpalGetLockingInfo(&Session, &LockingFeature);
+ if (Ret != TcgResultSuccess) {
+ return FALSE;
+ }
+
+ return OpalDeviceLocked (&SupportedAttributes, &LockingFeature);
+}
+
+/**
+ Unlock OPAL password for S3.
+
+ @param[in] OpalDev Opal object to unlock.
+
+**/
+VOID
+UnlockOpalPassword (
+ IN OPAL_PEI_DEVICE *OpalDev
+ )
+{
+ TCG_RESULT Result;
+ OPAL_SESSION Session;
+ BOOLEAN BlockSidSupport;
+ UINT32 PpStorageFlags;
+ BOOLEAN BlockSIDEnabled;
+
+ BlockSidSupport = FALSE;
+ if (IsOpalDeviceLocked (OpalDev, &BlockSidSupport)) {
+ ZeroMem(&Session, sizeof (Session));
+ Session.Sscp = &OpalDev->Sscp;
+ Session.MediaId = 0;
+ Session.OpalBaseComId = OpalDev->Device->OpalBaseComId;
+
+ Result = OpalUtilUpdateGlobalLockingRange (
+ &Session,
+ OpalDev->Device->Password,
+ OpalDev->Device->PasswordLength,
+ FALSE,
+ FALSE
+ );
+ DEBUG ((
+ DEBUG_INFO,
+ "%a() OpalUtilUpdateGlobalLockingRange() Result = 0x%x\n",
+ __FUNCTION__,
+ Result
+ ));
+ }
+
+ PpStorageFlags = Tcg2PhysicalPresenceLibGetManagementFlags ();
+ if ((PpStorageFlags & TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
+ BlockSIDEnabled = TRUE;
+ } else {
+ BlockSIDEnabled = FALSE;
+ }
+ if (BlockSIDEnabled && BlockSidSupport) {
+ Result = OpalBlockSid (&Session, TRUE);
+ DEBUG ((
+ DEBUG_INFO,
+ "%a() OpalBlockSid() Result = 0x%x\n",
+ __FUNCTION__,
+ Result
+ ));
+ }
+}
+
+/**
+ Unlock ATA OPAL password for S3.
+
+**/
+VOID
+UnlockOpalPasswordAta (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINT8 *DevInfo;
+ OPAL_DEVICE_ATA TempDevInfoAta;
+ OPAL_DEVICE_ATA *DevInfoAta;
+ UINTN DevInfoLengthAta;
+ UINT8 Bus;
+ UINT8 Device;
+ UINT8 Function;
+ OPAL_PEI_DEVICE OpalDev;
+ UINT8 BaseClassCode;
+ UINT8 SubClassCode;
+ UINT8 SataCmdSt;
+ AHCI_CONTEXT AhciContext;
+ UINT32 AhciBar;
+
+ DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
+
+ //
+ // Get ATA OPAL device info from LockBox.
+ //
+ DevInfo = (UINT8 *) &TempDevInfoAta;
+ DevInfoLengthAta = sizeof (OPAL_DEVICE_ATA);
+ Status = RestoreLockBox (&mOpalDeviceAtaGuid, DevInfo, &DevInfoLengthAta);
+ if (Status == EFI_BUFFER_TOO_SMALL) {
+ DevInfo = AllocatePages (EFI_SIZE_TO_PAGES (DevInfoLengthAta));
+ if (DevInfo != NULL) {
+ Status = RestoreLockBox (&mOpalDeviceAtaGuid, DevInfo, &DevInfoLengthAta);
+ }
+ }
+ if (EFI_ERROR (Status) || (DevInfo == NULL)) {
+ return;
+ }
+
+ for (DevInfoAta = (OPAL_DEVICE_ATA *) DevInfo;
+ (UINTN) DevInfoAta < ((UINTN) DevInfo + DevInfoLengthAta);
+ DevInfoAta = (OPAL_DEVICE_ATA *) ((UINTN) DevInfoAta + DevInfoAta->Length)) {
+ Bus = DevInfoAta->Device.Bus;
+ Device = DevInfoAta->Device.Device;
+ Function = DevInfoAta->Device.Function;
+
+ SataCmdSt = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, PCI_COMMAND_OFFSET));
+ PciWrite8 (PCI_LIB_ADDRESS (Bus, Device, Function, PCI_COMMAND_OFFSET), 0x6);
+
+ BaseClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x0B));
+ SubClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x0A));
+ if ((BaseClassCode != PCI_CLASS_MASS_STORAGE) ||
+ ((SubClassCode != PCI_CLASS_MASS_STORAGE_SATADPA) && (SubClassCode != PCI_CLASS_MASS_STORAGE_RAID))) {
+ DEBUG ((DEBUG_ERROR, "%a() ClassCode/SubClassCode are not supported\n", __FUNCTION__));
+ } else {
+ AhciBar = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24));
+ PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24), DevInfoAta->BarAddr);
+
+ ZeroMem (&AhciContext, sizeof (AHCI_CONTEXT));
+ AhciContext.AhciBar = DevInfoAta->BarAddr;
+ AhciAllocateResource (&AhciContext);
+ Status = AhciModeInitialize (&AhciContext, (UINT8)DevInfoAta->Port);
+ ASSERT_EFI_ERROR (Status);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a() AhciModeInitialize() error, Status: %r\n", __FUNCTION__, Status));
+ }
+
+ OpalDev.Signature = OPAL_PEI_DEVICE_SIGNATURE;
+ OpalDev.Sscp.ReceiveData = SecurityReceiveData;
+ OpalDev.Sscp.SendData = SecuritySendData;
+ OpalDev.DeviceType = OPAL_DEVICE_TYPE_ATA;
+ OpalDev.Device = (OPAL_DEVICE_COMMON *) DevInfoAta;
+ OpalDev.Context = &AhciContext;
+
+ UnlockOpalPassword (&OpalDev);
+
+ AhciFreeResource (&AhciContext);
+ PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24), AhciBar);
+ }
+ PciWrite8 (PCI_LIB_ADDRESS (Bus, Device, Function, PCI_COMMAND_OFFSET), SataCmdSt);
+ }
+
+ ZeroMem (DevInfo, DevInfoLengthAta);
+ if ((UINTN) DevInfo != (UINTN) &TempDevInfoAta) {
+ FreePages (DevInfo, EFI_SIZE_TO_PAGES (DevInfoLengthAta));
+ }
+
+ DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
+}
+
+/**
+ Unlock NVMe OPAL password for S3.
+
+**/
+VOID
+UnlockOpalPasswordNvme (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINT8 *DevInfo;
+ OPAL_DEVICE_NVME TempDevInfoNvme;
+ OPAL_DEVICE_NVME *DevInfoNvme;
+ UINTN DevInfoLengthNvme;
+ UINT8 Bus;
+ UINT8 Device;
+ UINT8 Function;
+ OPAL_PEI_DEVICE OpalDev;
+ UINT8 BaseClassCode;
+ UINT8 SubClassCode;
+ UINT8 ProgInt;
+ UINT8 NvmeCmdSt;
+ UINT8 *StorePcieConfDataList[16];
+ UINTN RpBase;
+ UINTN MemoryBase;
+ UINTN MemoryLength;
+ NVME_CONTEXT NvmeContext;
+
+ DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
+
+ //
+ // Get NVMe OPAL device info from LockBox.
+ //
+ DevInfo = (UINT8 *) &TempDevInfoNvme;
+ DevInfoLengthNvme = sizeof (OPAL_DEVICE_NVME);
+ Status = RestoreLockBox (&mOpalDeviceNvmeGuid, DevInfo, &DevInfoLengthNvme);
+ if (Status == EFI_BUFFER_TOO_SMALL) {
+ DevInfo = AllocatePages (EFI_SIZE_TO_PAGES (DevInfoLengthNvme));
+ if (DevInfo != NULL) {
+ Status = RestoreLockBox (&mOpalDeviceNvmeGuid, DevInfo, &DevInfoLengthNvme);
+ }
+ }
+ if (EFI_ERROR (Status) || (DevInfo == NULL)) {
+ return;
+ }
+
+ for (DevInfoNvme = (OPAL_DEVICE_NVME *) DevInfo;
+ (UINTN) DevInfoNvme < ((UINTN) DevInfo + DevInfoLengthNvme);
+ DevInfoNvme = (OPAL_DEVICE_NVME *) ((UINTN) DevInfoNvme + DevInfoNvme->Length)) {
+ Bus = DevInfoNvme->Device.Bus;
+ Device = DevInfoNvme->Device.Device;
+ Function = DevInfoNvme->Device.Function;
+
+ RpBase = 0;
+ NvmeCmdSt = 0;
+
+ ///
+ /// Save original RootPort configuration space to heap
+ ///
+ RpBase = SaveRestoreRootportConfSpace (
+ DevInfoNvme,
+ TRUE, // save
+ StorePcieConfDataList
+ );
+ MemoryBase = DevInfoNvme->BarAddr;
+ MemoryLength = 0;
+ ConfigureRootPortForPcieNand (RpBase, Bus, (UINT32) MemoryBase, (UINT32) MemoryLength);
+
+ ///
+ /// Enable PCIE decode for RootPort
+ ///
+ NvmeCmdSt = PciRead8 (RpBase + NVME_PCIE_PCICMD);
+ PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0x6);
+
+ BaseClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x0B));
+ SubClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x0A));
+ ProgInt = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x09));
+ if ((BaseClassCode != PCI_CLASS_MASS_STORAGE) ||
+ (SubClassCode != PCI_CLASS_MASS_STORAGE_NVM) ||
+ (ProgInt != PCI_IF_NVMHCI)) {
+ DEBUG ((DEBUG_ERROR, "%a() ClassCode/SubClassCode/PI are not supported\n", __FUNCTION__));
+ } else {
+ ZeroMem (&NvmeContext, sizeof (NVME_CONTEXT));
+ NvmeContext.Nbar = DevInfoNvme->BarAddr;
+ NvmeContext.PciBase = PCI_LIB_ADDRESS (Bus, Device, Function, 0x0);
+ NvmeContext.NvmeInitWaitTime = 0;
+ NvmeContext.Nsid = DevInfoNvme->NvmeNamespaceId;
+ NvmeAllocateResource (&NvmeContext);
+ Status = NvmeControllerInit (&NvmeContext);
+
+ OpalDev.Signature = OPAL_PEI_DEVICE_SIGNATURE;
+ OpalDev.Sscp.ReceiveData = SecurityReceiveData;
+ OpalDev.Sscp.SendData = SecuritySendData;
+ OpalDev.DeviceType = OPAL_DEVICE_TYPE_NVME;
+ OpalDev.Device = (OPAL_DEVICE_COMMON *) DevInfoNvme;
+ OpalDev.Context = &NvmeContext;
+
+ UnlockOpalPassword (&OpalDev);
+
+ Status = NvmeControllerExit (&NvmeContext);
+ NvmeFreeResource (&NvmeContext);
+ }
+
+ ASSERT (RpBase != 0);
+ PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0);
+ RpBase = SaveRestoreRootportConfSpace (
+ DevInfoNvme,
+ FALSE, // restore
+ StorePcieConfDataList
+ );
+ PciWrite8 (RpBase + NVME_PCIE_PCICMD, NvmeCmdSt);
+ }
+
+ ZeroMem (DevInfo, DevInfoLengthNvme);
+ if ((UINTN) DevInfo != (UINTN) &TempDevInfoNvme) {
+ FreePages (DevInfo, EFI_SIZE_TO_PAGES (DevInfoLengthNvme));
+ }
+
+ DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
+}
+
+/**
+ Unlock OPAL password for S3.
+
+**/
+VOID
+OpalPasswordS3 (
+ VOID
+ )
+{
+ UnlockOpalPasswordAta ();
+ UnlockOpalPasswordNvme ();
+}
+
+/**
+ Entry point of the notification callback function itself within the PEIM.
+ It is to unlock OPAL password for S3.
+
+ @param PeiServices Indirect reference to the PEI Services Table.
+ @param NotifyDescriptor Address of the notification descriptor data structure.
+ @param Ppi Address of the PPI that was installed.
+
+ @return Status of the notification.
+ The status code returned from this function is ignored.
+**/
+EFI_STATUS
+EFIAPI
+OpalPasswordEndOfPeiNotify(
+ IN EFI_PEI_SERVICES **PeiServices,
+ IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
+ IN VOID *Ppi
+ )
+{
+ EFI_STATUS Status;
+ EFI_BOOT_MODE BootMode;
+
+ Status = PeiServicesGetBootMode (&BootMode);
+ ASSERT_EFI_ERROR (Status);
+ if (BootMode != BOOT_ON_S3_RESUME) {
+ return EFI_UNSUPPORTED;
+ }
+
+ DEBUG ((DEBUG_INFO, "%a() - enter at S3 resume\n", __FUNCTION__));
+
+ OpalPasswordS3 ();
+
+ DEBUG ((DEBUG_INFO, "%a() - exit at S3 resume\n", __FUNCTION__));
+
+ return EFI_SUCCESS;
+}
+
+EFI_PEI_NOTIFY_DESCRIPTOR mOpalPasswordEndOfPeiNotifyDesc = {
+ (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
+ &gEfiEndOfPeiSignalPpiGuid,
+ OpalPasswordEndOfPeiNotify
+};
+
+/**
+ Main entry for this module.
+
+ @param FileHandle Handle of the file being invoked.
+ @param PeiServices Pointer to PEI Services table.
+
+ @return Status from PeiServicesNotifyPpi.
+
+**/
+EFI_STATUS
+EFIAPI
+OpalPasswordPeiInit (
+ IN EFI_PEI_FILE_HANDLE FileHandle,
+ IN CONST EFI_PEI_SERVICES **PeiServices
+ )
+{
+ EFI_STATUS Status;
+
+ Status = PeiServicesNotifyPpi (&mOpalPasswordEndOfPeiNotifyDesc);
+ ASSERT_EFI_ERROR (Status);
+ return Status;
+}
+
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
new file mode 100644
index 000000000000..31aab37f5d91
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
@@ -0,0 +1,133 @@
+/** @file
+ Opal Password PEI driver which is used to unlock Opal Password for S3.
+
+Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _OPAL_PASSWORD_PEI_H_
+#define _OPAL_PASSWORD_PEI_H_
+
+#include <PiPei.h>
+#include <IndustryStandard/Atapi.h>
+#include <IndustryStandard/Pci.h>
+
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PciLib.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PeimEntryPoint.h>
+#include <Library/PeiServicesLib.h>
+#include <Library/HobLib.h>
+#include <Library/TimerLib.h>
+#include <Library/LockBoxLib.h>
+#include <Library/TcgStorageOpalLib.h>
+#include <Library/Tcg2PhysicalPresenceLib.h>
+
+#include <Protocol/StorageSecurityCommand.h>
+
+#include <Ppi/IoMmu.h>
+
+#include "OpalPasswordCommon.h"
+#include "OpalAhciMode.h"
+#include "OpalNvmeMode.h"
+
+//
+// Time out Value for ATA pass through protocol
+//
+#define ATA_TIMEOUT 30000000
+
+//
+// The payload Length of HDD related ATA commands
+//
+#define HDD_PAYLOAD 512
+//
+// According to ATA spec, the max Length of hdd password is 32 bytes
+//
+#define OPAL_PASSWORD_MAX_LENGTH 32
+
+#pragma pack(1)
+
+/**
+* Opal I/O Type utilized by the Trusted IO callback
+*
+* The type indicates if the I/O is a send or receive
+*/
+typedef enum {
+ //
+ // I/O is a TCG Trusted Send command
+ //
+ OpalSend,
+
+ //
+ // I/O is a TCG Trusted Receive command
+ //
+ OpalRecv
+} OPAL_IO_TYPE;
+
+#define OPAL_PEI_DEVICE_SIGNATURE SIGNATURE_32 ('o', 'p', 'd', 's')
+
+typedef struct {
+ UINTN Signature;
+ EFI_STORAGE_SECURITY_COMMAND_PROTOCOL Sscp;
+ UINT8 DeviceType;
+ OPAL_DEVICE_COMMON *Device;
+ VOID *Context;
+} OPAL_PEI_DEVICE;
+
+#define OPAL_PEI_DEVICE_FROM_THIS(a) CR (a, OPAL_PEI_DEVICE, Sscp, OPAL_PEI_DEVICE_SIGNATURE)
+
+#pragma pack()
+
+/**
+ Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
+ OperationBusMasterCommonBuffer64 mapping.
+
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+IoMmuAllocateBuffer (
+ IN UINTN Pages,
+ OUT VOID **HostAddress,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+ @param Mapping The mapping value returned from Map().
+
+**/
+VOID
+IoMmuFreeBuffer (
+ IN UINTN Pages,
+ IN VOID *HostAddress,
+ IN VOID *Mapping
+ );
+
+#endif // _OPAL_PASSWORD_PEI_H_
+
diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
new file mode 100644
index 000000000000..81c57c36d2aa
--- /dev/null
+++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
@@ -0,0 +1,63 @@
+## @file
+# This is a Opal Password PEI driver.
+#
+# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = OpalPasswordPei
+ FILE_GUID = DED60489-979C-4B5A-8EE4-4068B0CC38DC
+ MODULE_TYPE = PEIM
+ VERSION_STRING = 1.0
+ ENTRY_POINT = OpalPasswordPeiInit
+
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = IA32 X64
+#
+
+[Sources]
+ OpalPasswordPei.c
+ OpalPasswordPei.h
+ OpalPasswordCommon.h
+ OpalAhciMode.c
+ OpalAhciMode.h
+ OpalNvmeMode.c
+ OpalNvmeMode.h
+ OpalNvmeReg.h
+
+[Packages]
+ MdePkg/MdePkg.dec
+ SecurityPkg/SecurityPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ PeimEntryPoint
+ PeiServicesLib
+ DebugLib
+ IoLib
+ PciLib
+ BaseLib
+ BaseMemoryLib
+ MemoryAllocationLib
+ TimerLib
+ HobLib
+ LockBoxLib
+ TcgStorageOpalLib
+ Tcg2PhysicalPresenceLib
+
+[Ppis]
+ gEdkiiIoMmuPpiGuid ## SOMETIMES_CONSUMES
+ gEfiEndOfPeiSignalPpiGuid ## NOTIFY
+
+[Depex]
+ gEfiPeiMasterBootModePpiGuid
--
2.7.0.windows.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 5/7] SecurityPkg OpalPassword: Remove old solution
2018-03-07 13:19 [PATCH V2 0/7] OpalPassword: New solution without SMM device code Star Zeng
` (3 preceding siblings ...)
2018-03-07 13:19 ` [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM device code Star Zeng
@ 2018-03-07 13:19 ` Star Zeng
2018-03-07 13:19 ` [PATCH V2 6/7] SecurityPkg OpalPasswordSupportLib: Remove it Star Zeng
2018-03-07 13:19 ` [PATCH V2 7/7] SecurityPkg OpalPasswordExtraInfoVariable.h: " Star Zeng
6 siblings, 0 replies; 10+ messages in thread
From: Star Zeng @ 2018-03-07 13:19 UTC (permalink / raw)
To: edk2-devel; +Cc: Star Zeng, Jiewen Yao, Eric Dong, Chao Zhang
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
---
SecurityPkg/SecurityPkg.dsc | 2 -
.../Tcg/Opal/OpalPasswordDxe/ComponentName.c | 398 ----
SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.c | 1091 ----------
SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.h | 412 ----
.../Tcg/Opal/OpalPasswordDxe/OpalDriverPrivate.h | 102 -
SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.c | 1527 --------------
SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.h | 146 --
.../Tcg/Opal/OpalPasswordDxe/OpalHiiCallbacks.c | 221 --
.../Opal/OpalPasswordDxe/OpalHiiFormStrings.uni | 103 -
.../Tcg/Opal/OpalPasswordDxe/OpalHiiFormValues.h | 120 --
.../Tcg/Opal/OpalPasswordDxe/OpalHiiPrivate.h | 268 ---
.../Tcg/Opal/OpalPasswordDxe/OpalPasswordDxe.inf | 82 -
.../Tcg/Opal/OpalPasswordDxe/OpalPasswordForm.vfr | 350 ----
.../Tcg/Opal/OpalPasswordSmm/OpalAhciMode.c | 1267 ------------
.../Tcg/Opal/OpalPasswordSmm/OpalAhciMode.h | 408 ----
SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.c | 767 -------
SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.h | 173 --
.../Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.c | 2165 --------------------
.../Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.h | 456 -----
SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeReg.h | 814 --------
.../Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.c | 1088 ----------
.../Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.h | 299 ---
.../Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf | 77 -
23 files changed, 12336 deletions(-)
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/ComponentName.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriverPrivate.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiCallbacks.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiFormStrings.uni
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiFormValues.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiPrivate.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordDxe.inf
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordForm.vfr
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalAhciMode.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalAhciMode.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeReg.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.c
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.h
delete mode 100644 SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf
diff --git a/SecurityPkg/SecurityPkg.dsc b/SecurityPkg/SecurityPkg.dsc
index f82703a17b82..9be484877cc2 100644
--- a/SecurityPkg/SecurityPkg.dsc
+++ b/SecurityPkg/SecurityPkg.dsc
@@ -322,8 +322,6 @@ [Components.IA32, Components.X64]
#
# Opal Password solution
#
- SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordDxe.inf
- SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf
SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/ComponentName.c b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/ComponentName.c
deleted file mode 100644
index ef963d0e0b62..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/ComponentName.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/** @file
- UEFI Component Name(2) protocol implementation for Opal driver.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "OpalDriver.h"
-
-//
-// EFI Component Name Protocol
-//
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gOpalComponentName = {
- OpalEfiDriverComponentNameGetDriverName,
- OpalEfiDriverComponentNameGetControllerName,
- "eng"
-};
-
-//
-// EFI Component Name 2 Protocol
-//
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gOpalComponentName2 = {
- OpalEfiDriverComponentName2GetDriverName,
- OpalEfiDriverComponentName2GetControllerName,
- "en"
-};
-
-
-/// The name of the driver in all the languages we support.
-GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mOpalDriverNameTable[] = {
- { LANGUAGE_RFC_3066_ENGLISH, (CHAR16*)EFI_DRIVER_NAME_UNICODE },
- { LANGUAGE_ISO_639_2_ENGLISH, (CHAR16*)EFI_DRIVER_NAME_UNICODE },
- { 0, 0 }
-};
-
-/**
- Retrieves a Unicode string that is the user readable name of the driver.
-
- This function retrieves the user readable name of a driver in the form of a
- Unicode string. If the driver specified by This has a user readable name in
- the language specified by Language, then a pointer to the driver name is
- returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
- by This does not support the language specified by Language,
- then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified
- in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by
- This and the language specified by Language was
- returned in DriverName.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverComponentNameGetDriverName(
- EFI_COMPONENT_NAME_PROTOCOL* This,
- CHAR8* Language,
- CHAR16** DriverName
- )
-{
- return LookupUnicodeString2(
- Language,
- This->SupportedLanguages,
- mOpalDriverNameTable,
- DriverName,
- TRUE
- );
-}
-
-/**
- Retrieves a Unicode string that is the user readable name of the driver.
-
- This function retrieves the user readable name of a driver in the form of a
- Unicode string. If the driver specified by This has a user readable name in
- the language specified by Language, then a pointer to the driver name is
- returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
- by This does not support the language specified by Language,
- then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified
- in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by
- This and the language specified by Language was
- returned in DriverName.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverComponentName2GetDriverName(
- EFI_COMPONENT_NAME2_PROTOCOL* This,
- CHAR8* Language,
- CHAR16** DriverName
- )
-{
- return LookupUnicodeString2(
- Language,
- This->SupportedLanguages,
- mOpalDriverNameTable,
- DriverName,
- FALSE
- );
-}
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param ControllerHandle[in] The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
-
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
-
- @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
-
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-GetControllerName(
- EFI_HANDLE ControllerHandle,
- EFI_HANDLE ChildHandle,
- CHAR8* Language,
- CHAR16** ControllerName
- )
-{
- if (Language == NULL || ControllerName == NULL || ControllerHandle == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- // don't support any controller or children names
- return EFI_UNSUPPORTED;
-}
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
-
- @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
-
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverComponentNameGetControllerName(
- EFI_COMPONENT_NAME_PROTOCOL* This,
- EFI_HANDLE ControllerHandle,
- EFI_HANDLE ChildHandle,
- CHAR8* Language,
- CHAR16** ControllerName
- )
-{
- return (GetControllerName( ControllerHandle, ChildHandle, Language, ControllerName));
-}
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
-
- @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
-
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverComponentName2GetControllerName(
- EFI_COMPONENT_NAME2_PROTOCOL* This,
- EFI_HANDLE ControllerHandle,
- EFI_HANDLE ChildHandle,
- CHAR8* Language,
- CHAR16** ControllerName
- )
-{
- return (GetControllerName(ControllerHandle, ChildHandle, Language, ControllerName));
-}
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.c b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.c
deleted file mode 100644
index cd0c5a4096a0..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.c
+++ /dev/null
@@ -1,1091 +0,0 @@
-/** @file
- Entrypoint of Opal UEFI Driver and contains all the logic to
- register for new Opal device instances.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-// This UEFI driver consumes EFI_STORAGE_SECURITY_PROTOCOL instances and installs an
-// HII GUI to manage Opal features if the device is Opal capable
-// If the Opal device is being managed by the UEFI Driver, it shall provide a popup
-// window during boot requesting a user password
-
-#include "OpalDriver.h"
-#include "OpalDriverPrivate.h"
-#include "OpalHii.h"
-
-OPAL_DRIVER mOpalDriver;
-
-#define MAX_PASSWORD_SIZE 32
-#define MAX_PASSWORD_TRY_COUNT 5
-
-//
-// Globals
-//
-EFI_DRIVER_BINDING_PROTOCOL gOpalDriverBinding = {
- OpalEfiDriverBindingSupported,
- OpalEfiDriverBindingStart,
- OpalEfiDriverBindingStop,
- 0x1b,
- NULL,
- NULL
-};
-
-
-/**
- Add new device to the global device list.
-
- @param Dev New create device.
-
-**/
-VOID
-AddDeviceToTail(
- IN OPAL_DRIVER_DEVICE *Dev
- )
-{
- OPAL_DRIVER_DEVICE *TmpDev;
-
- if (mOpalDriver.DeviceList == NULL) {
- mOpalDriver.DeviceList = Dev;
- } else {
- TmpDev = mOpalDriver.DeviceList;
- while (TmpDev->Next != NULL) {
- TmpDev = TmpDev->Next;
- }
-
- TmpDev->Next = Dev;
- }
-}
-
-/**
- Remove one device in the global device list.
-
- @param Dev The device need to be removed.
-
-**/
-VOID
-RemoveDevice (
- IN OPAL_DRIVER_DEVICE *Dev
- )
-{
- OPAL_DRIVER_DEVICE *TmpDev;
-
- if (mOpalDriver.DeviceList == NULL) {
- return;
- }
-
- if (mOpalDriver.DeviceList == Dev) {
- mOpalDriver.DeviceList = NULL;
- return;
- }
-
- TmpDev = mOpalDriver.DeviceList;
- while (TmpDev->Next != NULL) {
- if (TmpDev->Next == Dev) {
- TmpDev->Next = Dev->Next;
- break;
- }
- }
-}
-
-/**
- Get current device count.
-
- @retval return the current created device count.
-
-**/
-UINT8
-GetDeviceCount (
- VOID
- )
-{
- UINT8 Count;
- OPAL_DRIVER_DEVICE *TmpDev;
-
- Count = 0;
- TmpDev = mOpalDriver.DeviceList;
-
- while (TmpDev != NULL) {
- Count++;
- TmpDev = TmpDev->Next;
- }
-
- return Count;
-}
-
-/**
- Get password input from the popup windows, and unlock the device.
-
- @param[in] Dev The device which need to be unlock.
- @param[out] PressEsc Whether user escape function through Press ESC.
-
- @retval Password string if success. NULL if failed.
-
-**/
-CHAR8 *
-OpalDriverPopUpHddPassword (
- IN OPAL_DRIVER_DEVICE *Dev,
- OUT BOOLEAN *PressEsc
- )
-{
- EFI_INPUT_KEY InputKey;
- UINTN InputLength;
- CHAR16 Mask[MAX_PASSWORD_SIZE + 1];
- CHAR16 Unicode[MAX_PASSWORD_SIZE + 1];
- CHAR8 *Ascii;
- CHAR16 *PopUpString;
- UINTN StrLength;
-
- ZeroMem(Unicode, sizeof(Unicode));
- ZeroMem(Mask, sizeof(Mask));
-
- StrLength = StrLen(Dev->Name16);
- PopUpString = (CHAR16*) AllocateZeroPool ((8 + StrLength) * 2);
- *PressEsc = FALSE;
-
- if (Dev->Name16 == NULL) {
- UnicodeSPrint(PopUpString, StrLen(L"Unlock Disk") + 1, L"Unlock Disk");
- } else {
- UnicodeSPrint(PopUpString, StrLen(L"Unlock ") + StrLength + 1, L"Unlock %s", Dev->Name16);
- }
-
- gST->ConOut->ClearScreen(gST->ConOut);
-
- InputLength = 0;
- while (TRUE) {
- Mask[InputLength] = L'_';
- CreatePopUp(
- EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
- &InputKey,
- PopUpString,
- L"---------------------",
- Mask,
- NULL
- );
-
- //
- // Check key.
- //
- if (InputKey.ScanCode == SCAN_NULL) {
- //
- // password finished
- //
- if (InputKey.UnicodeChar == CHAR_CARRIAGE_RETURN) {
- //
- // Add the null terminator.
- //
- Unicode[InputLength] = 0;
- InputLength++;
- break;
- } else if ((InputKey.UnicodeChar == CHAR_NULL) ||
- (InputKey.UnicodeChar == CHAR_TAB) ||
- (InputKey.UnicodeChar == CHAR_LINEFEED)
- ) {
- continue;
- } else {
- //
- // delete last key entered
- //
- if (InputKey.UnicodeChar == CHAR_BACKSPACE) {
- if (InputLength > 0) {
- Unicode[InputLength] = 0;
- Mask[InputLength] = 0;
- InputLength--;
- }
- } else {
- //
- // add Next key entry
- //
- Unicode[InputLength] = InputKey.UnicodeChar;
- Mask[InputLength] = L'*';
- InputLength++;
- if (InputLength == MAX_PASSWORD_SIZE) {
- //
- // Add the null terminator.
- //
- Unicode[InputLength] = 0;
- Mask[InputLength] = 0;
- break;
- }
- }
- }
- }
-
- //
- // exit on ESC
- //
- if (InputKey.ScanCode == SCAN_ESC) {
- *PressEsc = TRUE;
- break;
- }
- }
-
- gST->ConOut->ClearScreen(gST->ConOut);
-
- if (InputLength == 0 || InputKey.ScanCode == SCAN_ESC) {
- return NULL;
- }
-
- Ascii = AllocateZeroPool (MAX_PASSWORD_SIZE + 1);
- if (Ascii == NULL) {
- return NULL;
- }
-
- UnicodeStrToAsciiStrS (Unicode, Ascii, MAX_PASSWORD_SIZE + 1);
- ZeroMem (Unicode, sizeof (Unicode));
-
- return Ascii;
-}
-
-/**
- Check if disk is locked, show popup window and ask for password if it is
-
- @param[in] Dev The device which need to be unlock.
-
-**/
-VOID
-OpalDriverRequestPassword (
- OPAL_DRIVER_DEVICE *Dev
- )
-{
- UINT8 Count;
- BOOLEAN IsEnabled;
- CHAR8 *Password;
- UINT32 PasswordLen;
- TCG_RESULT Ret;
- EFI_INPUT_KEY Key;
- OPAL_SESSION Session;
- BOOLEAN PressEsc;
- BOOLEAN Locked;
-
- if (Dev == NULL) {
- return;
- }
-
- Count = 0;
-
- IsEnabled = OpalFeatureEnabled (&Dev->OpalDisk.SupportedAttributes, &Dev->OpalDisk.LockingFeature);
- if (IsEnabled) {
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = Dev->OpalDisk.Sscp;
- Session.MediaId = Dev->OpalDisk.MediaId;
- Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
-
- Locked = OpalDeviceLocked (&Dev->OpalDisk.SupportedAttributes, &Dev->OpalDisk.LockingFeature);
-
- while (Count < MAX_PASSWORD_TRY_COUNT) {
- Password = OpalDriverPopUpHddPassword (Dev, &PressEsc);
- if (PressEsc) {
- if (Locked) {
- //
- // Current device in the lock status and
- // User not input password and press ESC,
- // keep device in lock status and continue boot.
- //
- do {
- CreatePopUp (
- EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
- &Key,
- L"Press ENTER to skip password, Press ESC to input password",
- NULL
- );
- } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
-
- if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
- gST->ConOut->ClearScreen(gST->ConOut);
- //
- // Keep lock and continue boot.
- //
- return;
- } else {
- //
- // Let user input password again.
- //
- continue;
- }
- } else {
- //
- // Current device in the unlock status and
- // User not input password and press ESC,
- // Shutdown the device.
- //
- do {
- CreatePopUp (
- EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
- &Key,
- L"Press ENTER to shutdown, Press ESC to input password",
- NULL
- );
- } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar != CHAR_CARRIAGE_RETURN));
-
- if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
- gRT->ResetSystem (EfiResetShutdown, EFI_SUCCESS, 0, NULL);
- } else {
- //
- // Let user input password again.
- //
- continue;
- }
- }
- }
-
- if (Password == NULL) {
- Count ++;
- continue;
- }
- PasswordLen = (UINT32) AsciiStrLen(Password);
-
- if (Locked) {
- Ret = OpalSupportUnlock(&Session, Password, PasswordLen, Dev->OpalDevicePath);
- } else {
- Ret = OpalSupportLock(&Session, Password, PasswordLen, Dev->OpalDevicePath);
- if (Ret == TcgResultSuccess) {
- Ret = OpalSupportUnlock(&Session, Password, PasswordLen, Dev->OpalDevicePath);
- }
- }
-
- if (Password != NULL) {
- ZeroMem (Password, PasswordLen);
- FreePool (Password);
- }
-
- if (Ret == TcgResultSuccess) {
- break;
- }
-
- Count++;
-
- do {
- CreatePopUp (
- EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
- &Key,
- L"Invalid password.",
- L"Press ENTER to retry",
- NULL
- );
- } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
- }
-
- if (Count >= MAX_PASSWORD_TRY_COUNT) {
- do {
- CreatePopUp (
- EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
- &Key,
- L"Opal password retry count exceeds the limit. Must shutdown!",
- L"Press ENTER to shutdown",
- NULL
- );
- } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
-
- gRT->ResetSystem (EfiResetShutdown, EFI_SUCCESS, 0, NULL);
- }
- }
-}
-
-/**
- Get devcie list info.
-
- @retval return the device list pointer.
-**/
-OPAL_DRIVER_DEVICE*
-OpalDriverGetDeviceList(
- VOID
- )
-{
- return mOpalDriver.DeviceList;
-}
-
-/**
- ReadyToBoot callback to send BlockSid command.
-
- @param Event Pointer to this event
- @param Context Event handler private Data
-
-**/
-VOID
-EFIAPI
-ReadyToBootCallback (
- IN EFI_EVENT Event,
- IN VOID *Context
- )
-{
- OPAL_DRIVER_DEVICE *Itr;
- TCG_RESULT Result;
- OPAL_SESSION Session;
- UINT32 PpStorageFlag;
-
- gBS->CloseEvent (Event);
-
- PpStorageFlag = Tcg2PhysicalPresenceLibGetManagementFlags ();
- if ((PpStorageFlag & TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
- //
- // Send BlockSID command to each Opal disk
- //
- Itr = mOpalDriver.DeviceList;
- while (Itr != NULL) {
- if (Itr->OpalDisk.SupportedAttributes.BlockSid) {
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = Itr->OpalDisk.Sscp;
- Session.MediaId = Itr->OpalDisk.MediaId;
- Session.OpalBaseComId = Itr->OpalDisk.OpalBaseComId;
-
- Result = OpalBlockSid (&Session, TRUE); // HardwareReset must always be TRUE
- if (Result != TcgResultSuccess) {
- DEBUG ((DEBUG_ERROR, "OpalBlockSid fail\n"));
- break;
- }
- }
-
- Itr = Itr->Next;
- }
- }
-}
-
-/**
- Stop this Controller.
-
- @param Dev The device need to be stopped.
-
-**/
-VOID
-OpalDriverStopDevice (
- OPAL_DRIVER_DEVICE *Dev
- )
-{
- //
- // free each name
- //
- FreePool(Dev->Name16);
-
- //
- // remove OPAL_DRIVER_DEVICE from the list
- // it updates the controllerList pointer
- //
- RemoveDevice(Dev);
-
- //
- // close protocols that were opened
- //
- gBS->CloseProtocol(
- Dev->Handle,
- &gEfiStorageSecurityCommandProtocolGuid,
- gOpalDriverBinding.DriverBindingHandle,
- Dev->Handle
- );
-
- gBS->CloseProtocol(
- Dev->Handle,
- &gEfiBlockIoProtocolGuid,
- gOpalDriverBinding.DriverBindingHandle,
- Dev->Handle
- );
-
- FreePool(Dev);
-}
-
-/**
- Get devcie name through the component name protocol.
-
- @param[in] AllHandlesBuffer The handle buffer for current system.
- @param[in] NumAllHandles The number of handles for the handle buffer.
- @param[in] Dev The device which need to get name.
- @param[in] UseComp1 Whether use component name or name2 protocol.
-
- @retval TRUE Find the name for this device.
- @retval FALSE Not found the name for this device.
-**/
-BOOLEAN
-OpalDriverGetDeviceNameByProtocol(
- EFI_HANDLE *AllHandlesBuffer,
- UINTN NumAllHandles,
- OPAL_DRIVER_DEVICE *Dev,
- BOOLEAN UseComp1
- )
-{
- EFI_HANDLE* ProtocolHandlesBuffer;
- UINTN NumProtocolHandles;
- EFI_STATUS Status;
- EFI_COMPONENT_NAME2_PROTOCOL* Cnp1_2; // efi component name and componentName2 have same layout
- EFI_GUID Protocol;
- UINTN StrLength;
- EFI_DEVICE_PATH_PROTOCOL* TmpDevPath;
- UINTN Index1;
- UINTN Index2;
- EFI_HANDLE TmpHandle;
- CHAR16 *DevName;
-
- if (Dev == NULL || AllHandlesBuffer == NULL || NumAllHandles == 0) {
- return FALSE;
- }
-
- Protocol = UseComp1 ? gEfiComponentNameProtocolGuid : gEfiComponentName2ProtocolGuid;
-
- //
- // Find all EFI_HANDLES with protocol
- //
- Status = gBS->LocateHandleBuffer(
- ByProtocol,
- &Protocol,
- NULL,
- &NumProtocolHandles,
- &ProtocolHandlesBuffer
- );
- if (EFI_ERROR(Status)) {
- return FALSE;
- }
-
-
- //
- // Exit early if no supported devices
- //
- if (NumProtocolHandles == 0) {
- return FALSE;
- }
-
- //
- // Get printable name by iterating through all protocols
- // using the handle as the child, and iterate through all handles for the controller
- // exit loop early once found, if not found, then delete device
- // storage security protocol instances already exist, add them to internal list
- //
- Status = EFI_DEVICE_ERROR;
- for (Index1 = 0; Index1 < NumProtocolHandles; Index1++) {
- DevName = NULL;
-
- if (Dev->Name16 != NULL) {
- return TRUE;
- }
-
- TmpHandle = ProtocolHandlesBuffer[Index1];
-
- Status = gBS->OpenProtocol(
- TmpHandle,
- &Protocol,
- (VOID**)&Cnp1_2,
- gImageHandle,
- NULL,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (EFI_ERROR(Status) || Cnp1_2 == NULL) {
- continue;
- }
-
- //
- // Use all handles array as controller handle
- //
- for (Index2 = 0; Index2 < NumAllHandles; Index2++) {
- Status = Cnp1_2->GetControllerName(
- Cnp1_2,
- AllHandlesBuffer[Index2],
- Dev->Handle,
- LANGUAGE_ISO_639_2_ENGLISH,
- &DevName
- );
- if (EFI_ERROR(Status)) {
- Status = Cnp1_2->GetControllerName(
- Cnp1_2,
- AllHandlesBuffer[Index2],
- Dev->Handle,
- LANGUAGE_RFC_3066_ENGLISH,
- &DevName
- );
- }
- if (!EFI_ERROR(Status) && DevName != NULL) {
- StrLength = StrLen(DevName) + 1; // Add one for NULL terminator
- Dev->Name16 = AllocateZeroPool(StrLength * sizeof (CHAR16));
- ASSERT (Dev->Name16 != NULL);
- StrCpyS (Dev->Name16, StrLength, DevName);
- Dev->NameZ = (CHAR8*)AllocateZeroPool(StrLength);
- UnicodeStrToAsciiStrS (DevName, Dev->NameZ, StrLength);
-
- //
- // Retrieve bridge BDF info and port number or namespace depending on type
- //
- TmpDevPath = NULL;
- Status = gBS->OpenProtocol(
- Dev->Handle,
- &gEfiDevicePathProtocolGuid,
- (VOID**)&TmpDevPath,
- gImageHandle,
- NULL,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
- if (!EFI_ERROR(Status)) {
- Dev->OpalDevicePath = DuplicateDevicePath (TmpDevPath);
- return TRUE;
- }
-
- if (Dev->Name16 != NULL) {
- FreePool(Dev->Name16);
- Dev->Name16 = NULL;
- }
- if (Dev->NameZ != NULL) {
- FreePool(Dev->NameZ);
- Dev->NameZ = NULL;
- }
- }
- }
- }
-
- return FALSE;
-}
-
-/**
- Get devcie name through the component name protocol.
-
- @param[in] Dev The device which need to get name.
-
- @retval TRUE Find the name for this device.
- @retval FALSE Not found the name for this device.
-**/
-BOOLEAN
-OpalDriverGetDriverDeviceName(
- OPAL_DRIVER_DEVICE *Dev
- )
-{
- EFI_HANDLE* AllHandlesBuffer;
- UINTN NumAllHandles;
- EFI_STATUS Status;
-
- if (Dev == NULL) {
- DEBUG((DEBUG_ERROR | DEBUG_INIT, "OpalDriverGetDriverDeviceName Exiting, Dev=NULL\n"));
- return FALSE;
- }
-
- //
- // Iterate through ComponentName2 handles to get name, if fails, try ComponentName
- //
- if (Dev->Name16 == NULL) {
- DEBUG((DEBUG_ERROR | DEBUG_INIT, "Name is null, update it\n"));
- //
- // Find all EFI_HANDLES
- //
- Status = gBS->LocateHandleBuffer(
- AllHandles,
- NULL,
- NULL,
- &NumAllHandles,
- &AllHandlesBuffer
- );
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_INFO, "LocateHandleBuffer for AllHandles failed %r\n", Status ));
- return FALSE;
- }
-
- //
- // Try component Name2
- //
- if (!OpalDriverGetDeviceNameByProtocol(AllHandlesBuffer, NumAllHandles, Dev, FALSE)) {
- DEBUG((DEBUG_ERROR | DEBUG_INIT, "ComponentName2 failed to get device name, try ComponentName\n"));
- if (!OpalDriverGetDeviceNameByProtocol(AllHandlesBuffer, NumAllHandles, Dev, TRUE)) {
- DEBUG((DEBUG_ERROR | DEBUG_INIT, "ComponentName failed to get device name, skip device\n"));
- return FALSE;
- }
- }
- }
-
- return TRUE;
-}
-
-/**
- Main entry for this driver.
-
- @param ImageHandle Image Handle this driver.
- @param SystemTable Pointer to SystemTable.
-
- @retval EFI_SUCESS This function always complete successfully.
-**/
-EFI_STATUS
-EFIAPI
-EfiDriverEntryPoint(
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE* SystemTable
- )
-{
- EFI_STATUS Status;
- EFI_EVENT ReadyToBootEvent;
-
- Status = EfiLibInstallDriverBindingComponentName2 (
- ImageHandle,
- SystemTable,
- &gOpalDriverBinding,
- ImageHandle,
- &gOpalComponentName,
- &gOpalComponentName2
- );
-
- if (EFI_ERROR(Status)) {
- DEBUG((DEBUG_ERROR, "Install protocols to Opal driver Handle failed\n"));
- return Status ;
- }
-
- //
- // Initialize Driver object
- //
- ZeroMem(&mOpalDriver, sizeof(mOpalDriver));
- mOpalDriver.Handle = ImageHandle;
-
- //
- // register a ReadyToBoot event callback for sending BlockSid command
- //
- Status = EfiCreateEventReadyToBootEx (
- TPL_CALLBACK,
- ReadyToBootCallback,
- (VOID *) &ImageHandle,
- &ReadyToBootEvent
- );
-
- //
- // Install Hii packages.
- //
- HiiInstall();
-
- return Status;
-}
-
-/**
- Tests to see if this driver supports a given controller.
-
- This function checks to see if the controller contains an instance of the
- EFI_STORAGE_SECURITY_COMMAND_PROTOCOL and the EFI_BLOCK_IO_PROTOCL
- and returns EFI_SUCCESS if it does.
-
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle The Handle of the controller to test. This Handle
- must support a protocol interface that supplies
- an I/O abstraction to the driver.
- @param[in] RemainingDevicePath This parameter is ignored.
-
- @retval EFI_SUCCESS The device contains required protocols
- @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
- RemainingDevicePath is already being managed by the driver
- specified by This.
- @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
- RemainingDevicePath is already being managed by a different
- driver or an application that requires exclusive access.
- Currently not implemented.
- @retval EFI_UNSUPPORTED The device does not contain requires protocols
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverBindingSupported(
- IN EFI_DRIVER_BINDING_PROTOCOL* This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
- )
-{
- EFI_STATUS Status;
- EFI_STORAGE_SECURITY_COMMAND_PROTOCOL* SecurityCommand;
- EFI_BLOCK_IO_PROTOCOL* BlkIo;
-
- //
- // Test EFI_STORAGE_SECURITY_COMMAND_PROTOCOL on controller Handle.
- //
- Status = gBS->OpenProtocol(
- Controller,
- &gEfiStorageSecurityCommandProtocolGuid,
- ( VOID ** )&SecurityCommand,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
-
- if (Status == EFI_ALREADY_STARTED) {
- return EFI_SUCCESS;
- }
-
- if (EFI_ERROR(Status)) {
- return Status;
- }
-
- //
- // Close protocol and reopen in Start call
- //
- gBS->CloseProtocol(
- Controller,
- &gEfiStorageSecurityCommandProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- //
- // Test EFI_BLOCK_IO_PROTOCOL on controller Handle, required by EFI_STORAGE_SECURITY_COMMAND_PROTOCOL
- // function APIs
- //
- Status = gBS->OpenProtocol(
- Controller,
- &gEfiBlockIoProtocolGuid,
- (VOID **)&BlkIo,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
-
- if (EFI_ERROR(Status)) {
- DEBUG((DEBUG_INFO, "No EFI_BLOCK_IO_PROTOCOL on controller\n"));
- return Status;
- }
-
- //
- // Close protocol and reopen in Start call
- //
- gBS->CloseProtocol(
- Controller,
- &gEfiBlockIoProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- return EFI_SUCCESS;
-}
-
-/**
- Enables Opal Management on a supported device if available.
-
- The start function is designed to be called after the Opal UEFI Driver has confirmed the
- "controller", which is a child Handle, contains the EF_STORAGE_SECURITY_COMMAND protocols.
- This function will complete the other necessary checks, such as verifying the device supports
- the correct version of Opal. Upon verification, it will add the device to the
- Opal HII list in order to expose Opal managmeent options.
-
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle The Handle of the controller to start. This Handle
- must support a protocol interface that supplies
- an I/O abstraction to the driver.
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
- parameter is ignored by device drivers, and is optional for bus
- drivers. For a bus driver, if this parameter is NULL, then handles
- for all the children of Controller are created by this driver.
- If this parameter is not NULL and the first Device Path Node is
- not the End of Device Path Node, then only the Handle for the
- child device specified by the first Device Path Node of
- RemainingDevicePath is created by this driver.
- If the first Device Path Node of RemainingDevicePath is
- the End of Device Path Node, no child Handle is created by this
- driver.
-
- @retval EFI_SUCCESS Opal management was enabled.
- @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- @retval Others The driver failed to start the device.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverBindingStart(
- IN EFI_DRIVER_BINDING_PROTOCOL* This,
- IN EFI_HANDLE Controller,
- IN EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
- )
-{
- EFI_STATUS Status;
- EFI_BLOCK_IO_PROTOCOL *BlkIo;
- OPAL_DRIVER_DEVICE *Dev;
- OPAL_DRIVER_DEVICE *Itr;
- BOOLEAN Result;
-
- Itr = mOpalDriver.DeviceList;
- while (Itr != NULL) {
- if (Controller == Itr->Handle) {
- return EFI_SUCCESS;
- }
- Itr = Itr->Next;
- }
-
- //
- // Create internal device for tracking. This allows all disks to be tracked
- // by same HII form
- //
- Dev = (OPAL_DRIVER_DEVICE*)AllocateZeroPool(sizeof(OPAL_DRIVER_DEVICE));
- if (Dev == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
- Dev->Handle = Controller;
-
- //
- // Open EFI_STORAGE_SECURITY_COMMAND_PROTOCOL to perform Opal supported checks
- //
- Status = gBS->OpenProtocol(
- Controller,
- &gEfiStorageSecurityCommandProtocolGuid,
- (VOID **)&Dev->Sscp,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR(Status)) {
- FreePool(Dev);
- return Status;
- }
-
- //
- // Open EFI_BLOCK_IO_PROTOCOL on controller Handle, required by EFI_STORAGE_SECURITY_COMMAND_PROTOCOL
- // function APIs
- //
- Status = gBS->OpenProtocol(
- Controller,
- &gEfiBlockIoProtocolGuid,
- (VOID **)&BlkIo,
- This->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_BY_DRIVER
- );
- if (EFI_ERROR(Status)) {
- //
- // Close storage security that was opened
- //
- gBS->CloseProtocol(
- Controller,
- &gEfiStorageSecurityCommandProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- FreePool(Dev);
- return Status;
- }
-
- //
- // Save mediaId
- //
- Dev->MediaId = BlkIo->Media->MediaId;
-
- gBS->CloseProtocol(
- Controller,
- &gEfiBlockIoProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- //
- // Acquire Ascii printable name of child, if not found, then ignore device
- //
- Result = OpalDriverGetDriverDeviceName (Dev);
- if (!Result) {
- goto Done;
- }
-
- Status = OpalDiskInitialize (Dev);
- if (EFI_ERROR (Status)) {
- goto Done;
- }
-
- AddDeviceToTail(Dev);
-
- //
- // check if device is locked and prompt for password
- //
- OpalDriverRequestPassword (Dev);
-
- return EFI_SUCCESS;
-
-Done:
- //
- // free device, close protocols and exit
- //
- gBS->CloseProtocol(
- Controller,
- &gEfiStorageSecurityCommandProtocolGuid,
- This->DriverBindingHandle,
- Controller
- );
-
- FreePool(Dev);
-
- return EFI_DEVICE_ERROR;
-}
-
-/**
- Stop this driver on Controller.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to stop driver on
- @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
- children is zero stop the entire bus driver.
- @param ChildHandleBuffer List of Child Handles to Stop.
-
- @retval EFI_SUCCESS This driver is removed Controller.
- @retval other This driver could not be removed from this device.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverBindingStop(
- EFI_DRIVER_BINDING_PROTOCOL* This,
- EFI_HANDLE Controller,
- UINTN NumberOfChildren,
- EFI_HANDLE* ChildHandleBuffer
- )
-{
- OPAL_DRIVER_DEVICE* Itr;
-
- Itr = mOpalDriver.DeviceList;
-
- //
- // does Controller match any of the devices we are managing for Opal
- //
- while (Itr != NULL) {
- if (Itr->Handle == Controller) {
- OpalDriverStopDevice (Itr);
- return EFI_SUCCESS;
- }
-
- Itr = Itr->Next;
- }
-
- return EFI_NOT_FOUND;
-}
-
-
-/**
- Unloads UEFI Driver. Very useful for debugging and testing.
-
- @param ImageHandle Image Handle this driver.
-
- @retval EFI_SUCCESS This function always complete successfully.
- @retval EFI_INVALID_PARAMETER The input ImageHandle is not valid.
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverUnload (
- IN EFI_HANDLE ImageHandle
- )
-{
- EFI_STATUS Status;
- OPAL_DRIVER_DEVICE *Itr;
-
- Status = EFI_SUCCESS;
-
- if (ImageHandle != gImageHandle) {
- return (EFI_INVALID_PARAMETER);
- }
-
- //
- // Uninstall any interface added to each device by us
- //
- while (mOpalDriver.DeviceList) {
- Itr = mOpalDriver.DeviceList;
- //
- // Remove OPAL_DRIVER_DEVICE from the list
- // it updates the controllerList pointer
- //
- OpalDriverStopDevice(Itr);
- }
-
- //
- // Uninstall the HII capability
- //
- Status = HiiUninstall();
-
- return Status;
-}
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.h b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.h
deleted file mode 100644
index 7761d64cbb28..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriver.h
+++ /dev/null
@@ -1,412 +0,0 @@
-/** @file
- Values defined and used by the Opal UEFI Driver.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _OPAL_DRIVER_H_
-#define _OPAL_DRIVER_H_
-
-#include <PiDxe.h>
-
-#include <Protocol/PciIo.h>
-#include <Protocol/SmmCommunication.h>
-#include <Protocol/BlockIo.h>
-#include <Protocol/LoadedImage.h>
-#include <Protocol/DevicePath.h>
-#include <Protocol/DevicePathToText.h>
-#include <Protocol/StorageSecurityCommand.h>
-
-#include <Library/UefiLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/BaseLib.h>
-#include <Library/PrintLib.h>
-#include <Library/DebugLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/HiiLib.h>
-#include <Library/UefiHiiServicesLib.h>
-#include <Library/TcgStorageOpalLib.h>
-#include <Library/OpalPasswordSupportLib.h>
-#include <Library/Tcg2PhysicalPresenceLib.h>
-
-#define EFI_DRIVER_NAME_UNICODE L"1.0 UEFI Opal Driver"
-
-// UEFI 2.1
-#define LANGUAGE_RFC_3066_ENGLISH ((CHAR8*)"en")
-
-// UEFI/EFI < 2.1
-#define LANGUAGE_ISO_639_2_ENGLISH ((CHAR8*)"eng")
-
-
-#define UNLOCK_VAR_NAME (const CHAR16*)L"UNLOCK"
-#define OPAL_FILTER_DRIVER_VAR_NAME L"FILTER_DRIVER"
-
-
-#define CONCAT_(x, y) x ## y
-#define CONCAT(x, y) CONCAT_(x, y)
-
-#define UNICODE_STR(x) CONCAT( L, x )
-
-extern EFI_DRIVER_BINDING_PROTOCOL gOpalDriverBinding;
-extern EFI_COMPONENT_NAME_PROTOCOL gOpalComponentName;
-extern EFI_COMPONENT_NAME2_PROTOCOL gOpalComponentName2;
-
-/**
- Unloads UEFI Driver. Very useful for debugging and testing.
-
- @param ImageHandle Image handle this driver.
-
- @retval EFI_SUCCESS This function always complete successfully.
- @retval EFI_INVALID_PARAMETER The input ImageHandle is not valid.
-**/
-EFI_STATUS
-EFIAPI
-EfiDriverUnload(
- EFI_HANDLE ImageHandle
- );
-
-
-/**
- Test to see if this driver supports Controller.
-
- @param This Protocol instance pointer.
- @param ControllerHandle Handle of device to test
- @param RemainingDevicePath Optional parameter use to pick a specific child
- device to start.
-
- @retval EFI_SUCCESS This driver supports this device.
- @retval EFI_ALREADY_STARTED This driver is already running on this device.
- @retval other This driver does not support this device.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverBindingSupported(
- EFI_DRIVER_BINDING_PROTOCOL* This,
- EFI_HANDLE Controller,
- EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
- );
-
-/**
- Enables Opal Management on a supported device if available.
-
- The start function is designed to be called after the Opal UEFI Driver has confirmed the
- "controller", which is a child handle, contains the EF_STORAGE_SECURITY_COMMAND protocols.
- This function will complete the other necessary checks, such as verifying the device supports
- the correct version of Opal. Upon verification, it will add the device to the
- Opal HII list in order to expose Opal managmeent options.
-
- @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
- @param[in] ControllerHandle The handle of the controller to start. This handle
- must support a protocol interface that supplies
- an I/O abstraction to the driver.
- @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
- parameter is ignored by device drivers, and is optional for bus
- drivers. For a bus driver, if this parameter is NULL, then handles
- for all the children of Controller are created by this driver.
- If this parameter is not NULL and the first Device Path Node is
- not the End of Device Path Node, then only the handle for the
- child device specified by the first Device Path Node of
- RemainingDevicePath is created by this driver.
- If the first Device Path Node of RemainingDevicePath is
- the End of Device Path Node, no child handle is created by this
- driver.
-
- @retval EFI_SUCCESS Opal management was enabled.
- @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
- @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
- @retval Others The driver failed to start the device.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverBindingStart(
- EFI_DRIVER_BINDING_PROTOCOL* This,
- EFI_HANDLE Controller,
- EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
- );
-
-/**
- Stop this driver on Controller.
-
- @param This Protocol instance pointer.
- @param Controller Handle of device to stop driver on
- @param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
- children is zero stop the entire bus driver.
- @param ChildHandleBuffer List of Child Handles to Stop.
-
- @retval EFI_SUCCESS This driver is removed Controller.
- @retval other This driver could not be removed from this device.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverBindingStop(
- EFI_DRIVER_BINDING_PROTOCOL* This,
- EFI_HANDLE Controller,
- UINTN NumberOfChildren,
- EFI_HANDLE* ChildHandleBuffer
- );
-
-/**
- Retrieves a Unicode string that is the user readable name of the driver.
-
- This function retrieves the user readable name of a driver in the form of a
- Unicode string. If the driver specified by This has a user readable name in
- the language specified by Language, then a pointer to the driver name is
- returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
- by This does not support the language specified by Language,
- then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified
- in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by
- This and the language specified by Language was
- returned in DriverName.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverComponentNameGetDriverName(
- EFI_COMPONENT_NAME_PROTOCOL* This,
- CHAR8* Language,
- CHAR16** DriverName
- );
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
-
- @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
-
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverComponentNameGetControllerName(
- EFI_COMPONENT_NAME_PROTOCOL* This,
- EFI_HANDLE ControllerHandle,
- EFI_HANDLE ChildHandle,
- CHAR8* Language,
- CHAR16** ControllerName
- );
-
-/**
- Retrieves a Unicode string that is the user readable name of the driver.
-
- This function retrieves the user readable name of a driver in the form of a
- Unicode string. If the driver specified by This has a user readable name in
- the language specified by Language, then a pointer to the driver name is
- returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
- by This does not support the language specified by Language,
- then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified
- in RFC 4646 or ISO 639-2 language code format.
-
- @param DriverName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- driver specified by This in the language
- specified by Language.
-
- @retval EFI_SUCCESS The Unicode string for the Driver specified by
- This and the language specified by Language was
- returned in DriverName.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER DriverName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverComponentName2GetDriverName(
- EFI_COMPONENT_NAME2_PROTOCOL* This,
- CHAR8* Language,
- CHAR16** DriverName
- );
-
-/**
- Retrieves a Unicode string that is the user readable name of the controller
- that is being managed by a driver.
-
- This function retrieves the user readable name of the controller specified by
- ControllerHandle and ChildHandle in the form of a Unicode string. If the
- driver specified by This has a user readable name in the language specified by
- Language, then a pointer to the controller name is returned in ControllerName,
- and EFI_SUCCESS is returned. If the driver specified by This is not currently
- managing the controller specified by ControllerHandle and ChildHandle,
- then EFI_UNSUPPORTED is returned. If the driver specified by This does not
- support the language specified by Language, then EFI_UNSUPPORTED is returned.
-
- @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
- EFI_COMPONENT_NAME_PROTOCOL instance.
-
- @param ControllerHandle[in] The handle of a controller that the driver
- specified by This is managing. This handle
- specifies the controller whose name is to be
- returned.
-
- @param ChildHandle[in] The handle of the child controller to retrieve
- the name of. This is an optional parameter that
- may be NULL. It will be NULL for device
- drivers. It will also be NULL for a bus drivers
- that wish to retrieve the name of the bus
- controller. It will not be NULL for a bus
- driver that wishes to retrieve the name of a
- child controller.
-
- @param Language[in] A pointer to a Null-terminated ASCII string
- array indicating the language. This is the
- language of the driver name that the caller is
- requesting, and it must match one of the
- languages specified in SupportedLanguages. The
- number of languages supported by a driver is up
- to the driver writer. Language is specified in
- RFC 4646 or ISO 639-2 language code format.
-
- @param ControllerName[out] A pointer to the Unicode string to return.
- This Unicode string is the name of the
- controller specified by ControllerHandle and
- ChildHandle in the language specified by
- Language from the point of view of the driver
- specified by This.
-
- @retval EFI_SUCCESS The Unicode string for the user readable name in
- the language specified by Language for the
- driver specified by This was returned in
- DriverName.
-
- @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
-
- @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
- EFI_HANDLE.
-
- @retval EFI_INVALID_PARAMETER Language is NULL.
-
- @retval EFI_INVALID_PARAMETER ControllerName is NULL.
-
- @retval EFI_UNSUPPORTED The driver specified by This is not currently
- managing the controller specified by
- ControllerHandle and ChildHandle.
-
- @retval EFI_UNSUPPORTED The driver specified by This does not support
- the language specified by Language.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalEfiDriverComponentName2GetControllerName(
- EFI_COMPONENT_NAME2_PROTOCOL* This,
- EFI_HANDLE ControllerHandle,
- EFI_HANDLE ChildHandle,
- CHAR8* Language,
- CHAR16** ControllerName
- );
-
-#endif //_OPAL_DRIVER_H_
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriverPrivate.h b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriverPrivate.h
deleted file mode 100644
index 19ebc3262319..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalDriverPrivate.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/** @file
- Private structures and functions used within OPAL_DRIVER
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _OPAL_DRIVER_PRIVATE_H_
-#define _OPAL_DRIVER_PRIVATE_H_
-#include "OpalDriver.h"
-
-#define OPAL_MSID_LENGHT 128
-
-#pragma pack(1)
-//
-// Structure that is used to represent an OPAL_DISK.
-//
-typedef struct {
- UINT32 MsidLength; // Byte length of MSID Pin for device
- UINT8 Msid[OPAL_MSID_LENGHT]; // MSID Pin for device
- EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *Sscp;
- UINT32 MediaId; // MediaId is used by Ssc Protocol.
- EFI_DEVICE_PATH_PROTOCOL *OpalDevicePath;
- UINT16 OpalBaseComId; // Opal SSC 1 base com id.
- OPAL_OWNER_SHIP Owner;
- OPAL_DISK_SUPPORT_ATTRIBUTE SupportedAttributes;
- TCG_LOCKING_FEATURE_DESCRIPTOR LockingFeature; // Locking Feature Descriptor retrieved from performing a Level 0 Discovery
-} OPAL_DISK;
-
-//
-// Device with block IO protocol
-//
-typedef struct _OPAL_DRIVER_DEVICE OPAL_DRIVER_DEVICE;
-
-struct _OPAL_DRIVER_DEVICE {
- OPAL_DRIVER_DEVICE *Next; ///< Linked list pointer
- EFI_HANDLE Handle; ///< Device handle
- OPAL_DISK OpalDisk; ///< User context
- CHAR16 *Name16; ///< Allocated/freed by UEFI Filter Driver at device creation/removal
- CHAR8 *NameZ; ///< Allocated/freed by UEFI Filter Driver at device creation/removal
- UINT32 MediaId; ///< Required parameter for EFI_STORAGE_SECURITY_COMMAND_PROTOCOL, from BLOCK_IO_MEDIA
-
- EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *Sscp; /// Device protocols consumed
- EFI_DEVICE_PATH_PROTOCOL *OpalDevicePath;
-};
-
-//
-// Opal Driver UEFI Driver Model
-//
-typedef struct {
- EFI_HANDLE Handle; ///< Driver image handle
- OPAL_DRIVER_DEVICE *DeviceList; ///< Linked list of controllers owned by this Driver
-} OPAL_DRIVER;
-#pragma pack()
-
-//
-// Retrieves a OPAL_DRIVER_DEVICE based on the pointer to its StorageSecurity protocol.
-//
-#define DRIVER_DEVICE_FROM_OPALDISK(OpalDiskPointer) (OPAL_DRIVER_DEVICE*)(BASE_CR(OpalDiskPointer, OPAL_DRIVER_DEVICE, OpalDisk))
-
-/**
- Get devcie list info.
-
- @retval return the device list pointer.
-**/
-OPAL_DRIVER_DEVICE*
-OpalDriverGetDeviceList(
- VOID
- );
-
-/**
- Get devcie name through the component name protocol.
-
- @param[in] Dev The device which need to get name.
-
- @retval TRUE Find the name for this device.
- @retval FALSE Not found the name for this device.
-**/
-BOOLEAN
-OpalDriverGetDriverDeviceName(
- OPAL_DRIVER_DEVICE *Dev
- );
-
-/**
- Get current device count.
-
- @retval return the current created device count.
-
-**/
-UINT8
-GetDeviceCount (
- VOID
- );
-
-#endif // _OPAL_DRIVER_P_H_
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.c b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.c
deleted file mode 100644
index e3bde4275dfa..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.c
+++ /dev/null
@@ -1,1527 +0,0 @@
-/** @file
- Implementation of the HII for the Opal UEFI Driver.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "OpalHii.h"
-#include "OpalDriver.h"
-#include "OpalHiiPrivate.h"
-
-//
-// This is the generated IFR binary Data for each formset defined in VFR.
-// This Data array is ready to be used as input of HiiAddPackages() to
-// create a packagelist (which contains Form packages, String packages, etc).
-//
-extern UINT8 OpalPasswordFormBin[];
-
-//
-// This is the generated String package Data for all .UNI files.
-// This Data array is ready to be used as input of HiiAddPackages() to
-// create a packagelist (which contains Form packages, String packages, etc).
-//
-extern UINT8 OpalPasswordDxeStrings[];
-
-CHAR16 OpalPasswordStorageName[] = L"OpalHiiConfig";
-
-EFI_HII_CONFIG_ACCESS_PROTOCOL gHiiConfigAccessProtocol;
-
-//
-// Handle to the list of HII packages (forms and strings) for this driver
-//
-EFI_HII_HANDLE gHiiPackageListHandle = NULL;
-
-//
-// Package List GUID containing all form and string packages
-//
-const EFI_GUID gHiiPackageListGuid = PACKAGE_LIST_GUID;
-const EFI_GUID gHiiSetupVariableGuid = SETUP_VARIABLE_GUID;
-
-//
-// Structure that contains state of the HII
-// This structure is updated by Hii.cpp and its contents
-// is rendered in the HII.
-//
-OPAL_HII_CONFIGURATION gHiiConfiguration;
-
-CHAR8 gHiiOldPassword[MAX_PASSWORD_CHARACTER_LENGTH] = {0};
-UINT32 gHiiOldPasswordLength = 0;
-
-//
-// The device path containing the VENDOR_DEVICE_PATH and EFI_DEVICE_PATH_PROTOCOL
-//
-HII_VENDOR_DEVICE_PATH gHiiVendorDevicePath = {
- {
- {
- HARDWARE_DEVICE_PATH,
- HW_VENDOR_DP,
- {
- (UINT8)(sizeof(VENDOR_DEVICE_PATH)),
- (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8)
- }
- },
- OPAL_PASSWORD_CONFIG_GUID
- },
- {
- END_DEVICE_PATH_TYPE,
- END_ENTIRE_DEVICE_PATH_SUBTYPE,
- {
- (UINT8)(END_DEVICE_PATH_LENGTH),
- (UINT8)((END_DEVICE_PATH_LENGTH) >> 8)
- }
- }
-};
-
-
-/**
- Sets the current system state of global config variables.
-
-**/
-VOID
-HiiSetCurrentConfiguration(
- VOID
- )
-{
- UINT32 PpStorageFlag;
- EFI_STRING NewString;
-
- gHiiConfiguration.NumDisks = GetDeviceCount();
-
- //
- // Update the BlockSID status string.
- //
- PpStorageFlag = Tcg2PhysicalPresenceLibGetManagementFlags ();
-
- if ((PpStorageFlag & TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
- NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_ENABLED), NULL);
- if (NewString == NULL) {
- DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
- return;
- }
- } else {
- NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISABLED), NULL);
- if (NewString == NULL) {
- DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
- return;
- }
- }
- HiiSetString(gHiiPackageListHandle, STRING_TOKEN(STR_BLOCKSID_STATUS1), NewString, NULL);
- FreePool (NewString);
-
- if ((PpStorageFlag & TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_PP_REQUIRED_FOR_ENABLE_BLOCK_SID) != 0) {
- NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_TRUE), NULL);
- if (NewString == NULL) {
- DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
- return;
- }
- } else {
- NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_FALSE), NULL);
- if (NewString == NULL) {
- DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
- return;
- }
- }
- HiiSetString(gHiiPackageListHandle, STRING_TOKEN(STR_BLOCKSID_STATUS2), NewString, NULL);
- FreePool (NewString);
-
- if ((PpStorageFlag & TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_PP_REQUIRED_FOR_DISABLE_BLOCK_SID) != 0) {
- NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_TRUE), NULL);
- if (NewString == NULL) {
- DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
- return;
- }
- } else {
- NewString = HiiGetString (gHiiPackageListHandle, STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_FALSE), NULL);
- if (NewString == NULL) {
- DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( ) failed\n"));
- return;
- }
- }
- HiiSetString(gHiiPackageListHandle, STRING_TOKEN(STR_BLOCKSID_STATUS3), NewString, NULL);
- FreePool (NewString);
-}
-
-/**
- Install the HII related resources.
-
- @retval EFI_SUCCESS Install all the resources success.
- @retval other Error occur when install the resources.
-**/
-EFI_STATUS
-HiiInstall(
- VOID
- )
-{
- EFI_STATUS Status;
- EFI_HANDLE DriverHandle;
-
- //
- // Clear the global configuration.
- //
- ZeroMem(&gHiiConfiguration, sizeof(gHiiConfiguration));
-
- //
- // Obtain the driver handle that the BIOS assigned us
- //
- DriverHandle = HiiGetDriverImageHandleCB();
-
- //
- // Populate the config access protocol with the three functions we are publishing
- //
- gHiiConfigAccessProtocol.ExtractConfig = ExtractConfig;
- gHiiConfigAccessProtocol.RouteConfig = RouteConfig;
- gHiiConfigAccessProtocol.Callback = DriverCallback;
-
- //
- // Associate the required protocols with our driver handle
- //
- Status = gBS->InstallMultipleProtocolInterfaces(
- &DriverHandle,
- &gEfiHiiConfigAccessProtocolGuid,
- &gHiiConfigAccessProtocol, // HII callback
- &gEfiDevicePathProtocolGuid,
- &gHiiVendorDevicePath, // required for HII callback allow all disks to be shown in same hii
- NULL
- );
-
- if (EFI_ERROR(Status)) {
- return Status;
- }
-
- return OpalHiiAddPackages();
-}
-
-/**
- Install the HII form and string packages.
-
- @retval EFI_SUCCESS Install all the resources success.
- @retval EFI_OUT_OF_RESOURCES Out of resource error.
-**/
-EFI_STATUS
-OpalHiiAddPackages(
- VOID
- )
-{
- EFI_HANDLE DriverHandle;
- CHAR16 *NewString;
-
- DriverHandle = HiiGetDriverImageHandleCB();
-
- //
- // Publish the HII form and HII string packages
- //
- gHiiPackageListHandle = HiiAddPackages(
- &gHiiPackageListGuid,
- DriverHandle,
- OpalPasswordDxeStrings,
- OpalPasswordFormBin,
- (VOID*)NULL
- );
-
- //
- // Make sure the packages installed successfully
- //
- if (gHiiPackageListHandle == NULL) {
- DEBUG ((DEBUG_INFO, "OpalHiiAddPackages failed\n"));
- return EFI_OUT_OF_RESOURCES;
- }
-
- //
- // Update Version String in main window
- //
- NewString = HiiGetDriverNameCB ();
- if (HiiSetString(gHiiPackageListHandle, STRING_TOKEN(STR_MAIN_OPAL_VERSION), NewString, NULL) == 0) {
- DEBUG ((DEBUG_INFO, "OpalHiiAddPackages: HiiSetString( ) failed\n"));
- return EFI_OUT_OF_RESOURCES;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Uninstall the HII capability.
-
- @retval EFI_SUCCESS Uninstall all the resources success.
- @retval others Other errors occur when unistall the hii resource.
-**/
-EFI_STATUS
-HiiUninstall(
- VOID
- )
-{
- EFI_STATUS Status;
-
- //
- // Remove the packages we've provided to the BIOS
- //
- HiiRemovePackages(gHiiPackageListHandle);
-
- //
- // Remove the protocols from our driver handle
- //
- Status = gBS->UninstallMultipleProtocolInterfaces(
- HiiGetDriverImageHandleCB(),
- &gEfiHiiConfigAccessProtocolGuid,
- &gHiiConfigAccessProtocol, // HII callback
- &gEfiDevicePathProtocolGuid,
- &gHiiVendorDevicePath, // required for HII callback
- NULL
- );
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_INFO, "Cannot uninstall Hii Protocols: %r\n", Status));
- }
-
- return Status;
-}
-
-/**
- Updates the main menu form.
-
- @retval EFI_SUCCESS update the main form success.
-**/
-EFI_STATUS
-HiiPopulateMainMenuForm (
- VOID
- )
-{
- UINT8 Index;
- CHAR8 *DiskName;
- EFI_STRING_ID DiskNameId;
- OPAL_DISK *OpalDisk;
-
- HiiSetCurrentConfiguration();
-
- gHiiConfiguration.SupportedDisks = 0;
-
- for (Index = 0; Index < gHiiConfiguration.NumDisks; Index++) {
- OpalDisk = HiiGetOpalDiskCB (Index);
- if ((OpalDisk != NULL) && OpalFeatureSupported (&OpalDisk->SupportedAttributes)) {
- gHiiConfiguration.SupportedDisks |= (1 << Index);
- DiskNameId = GetDiskNameStringId (Index);
- DiskName = HiiDiskGetNameCB (Index);
- if ((DiskName == NULL) || (DiskNameId == 0)) {
- return EFI_UNSUPPORTED;
- }
- HiiSetFormString(DiskNameId, DiskName);
- }
- }
-
- OpalHiiSetBrowserData ();
- return EFI_SUCCESS;
-}
-
-/**
- Update the disk action info.
-
- @param ActionString
- @param SelectedAction
-
- @retval EFI_SUCCESS Uninstall all the resources success.
-**/
-EFI_STATUS
-HiiSelectDiskAction (
- CHAR8 *ActionString,
- UINT8 SelectedAction
- )
-{
- OPAL_DISK *OpalDisk;
- OPAL_DISK_ACTIONS AvailActions;
-
- OpalHiiGetBrowserData ();
-
- HiiSetFormString(STRING_TOKEN(STR_DISK_ACTION_LBL), ActionString);
- HiiSetFormString(STRING_TOKEN(STR_ACTION_STATUS), " ");
-
- gHiiConfiguration.SelectedAction = SelectedAction;
- gHiiConfiguration.AvailableFields = 0;
-
- OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
- if (OpalDisk == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- if (OpalSupportGetAvailableActions (&OpalDisk->SupportedAttributes, &OpalDisk->LockingFeature, OpalDisk->Owner, &AvailActions) != TcgResultSuccess) {
- return EFI_DEVICE_ERROR;
- }
-
- switch (SelectedAction) {
- case HII_KEY_ID_GOTO_LOCK:
- case HII_KEY_ID_GOTO_UNLOCK:
- case HII_KEY_ID_GOTO_SET_ADMIN_PWD:
- case HII_KEY_ID_GOTO_SET_USER_PWD:
- case HII_KEY_ID_GOTO_SECURE_ERASE:
- case HII_KEY_ID_GOTO_DISABLE_USER:
- case HII_KEY_ID_GOTO_ENABLE_FEATURE: // User is required to enter Password to enable Feature
- gHiiConfiguration.AvailableFields |= HII_FIELD_PASSWORD;
- break;
-
- case HII_KEY_ID_GOTO_PSID_REVERT:
- gHiiConfiguration.AvailableFields |= HII_FIELD_PSID;
- break;
-
- case HII_KEY_ID_GOTO_REVERT:
- gHiiConfiguration.AvailableFields |= HII_FIELD_PASSWORD;
- gHiiConfiguration.AvailableFields |= HII_FIELD_KEEP_USER_DATA;
- if (AvailActions.RevertKeepDataForced) {
- gHiiConfiguration.AvailableFields |= HII_FIELD_KEEP_USER_DATA_FORCED;
- }
- break;
- }
-
- OpalHiiSetBrowserData ();
-
- return EFI_SUCCESS;
-}
-
-/**
- Get disk name string id.
-
- @param DiskIndex The input disk index info.
-
- @retval The disk name string id.
-
-**/
-EFI_STRING_ID
-GetDiskNameStringId(
- UINT8 DiskIndex
- )
-{
- switch (DiskIndex) {
- case 0: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_0);
- case 1: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_1);
- case 2: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_2);
- case 3: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_3);
- case 4: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_4);
- case 5: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_5);
- }
- return 0;
-}
-
-/**
- This function processes the results of changes in configuration.
-
- @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
- @param Action Specifies the type of action taken by the browser.
- @param QuestionId A unique value which is sent to the original
- exporting driver so that it can identify the type
- of data to expect.
- @param Type The type of value for the question.
- @param Value A pointer to the data being sent to the original
- exporting driver.
- @param ActionRequest On return, points to the action requested by the
- callback function.
-
- @retval EFI_SUCCESS The callback successfully handled the action.
- @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the
- variable and its data.
- @retval EFI_DEVICE_ERROR The variable could not be saved.
- @retval EFI_UNSUPPORTED The specified Action is not supported by the
- callback.
-
-**/
-EFI_STATUS
-EFIAPI
-DriverCallback(
- CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
- EFI_BROWSER_ACTION Action,
- EFI_QUESTION_ID QuestionId,
- UINT8 Type,
- EFI_IFR_TYPE_VALUE *Value,
- EFI_BROWSER_ACTION_REQUEST *ActionRequest
- )
-{
- HII_KEY HiiKey;
- UINT8 HiiKeyId;
- UINT32 PpRequest;
-
- if (ActionRequest != NULL) {
- *ActionRequest = EFI_BROWSER_ACTION_REQUEST_NONE;
- } else {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // If QuestionId is an auto-generated key (label, empty line, etc.), ignore it.
- //
- if ((QuestionId & HII_KEY_FLAG) == 0) {
- return EFI_SUCCESS;
- }
-
- HiiKey.Raw = QuestionId;
- HiiKeyId = (UINT8) HiiKey.KeyBits.Id;
-
- if (Action == EFI_BROWSER_ACTION_FORM_OPEN) {
- switch (HiiKeyId) {
- case HII_KEY_ID_VAR_SUPPORTED_DISKS:
- DEBUG ((DEBUG_INFO, "HII_KEY_ID_VAR_SUPPORTED_DISKS\n"));
- return HiiPopulateMainMenuForm ();
-
- case HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS:
- return HiiPopulateDiskInfoForm();
- }
- } else if (Action == EFI_BROWSER_ACTION_CHANGING) {
- switch (HiiKeyId) {
- case HII_KEY_ID_GOTO_DISK_INFO:
- return HiiSelectDisk((UINT8)HiiKey.KeyBits.Index);
-
- case HII_KEY_ID_GOTO_LOCK:
- return HiiSelectDiskAction("Action: Lock", HiiKeyId);
-
- case HII_KEY_ID_GOTO_UNLOCK:
- return HiiSelectDiskAction("Action: Unlock", HiiKeyId);
-
- case HII_KEY_ID_GOTO_SET_ADMIN_PWD:
- return HiiSelectDiskAction("Action: Set Administrator Password", HiiKeyId);
-
- case HII_KEY_ID_GOTO_SET_USER_PWD:
- return HiiSelectDiskAction("Action: Set User Password", HiiKeyId);
-
- case HII_KEY_ID_GOTO_SECURE_ERASE:
- return HiiSelectDiskAction("Action: Secure Erase", HiiKeyId);
-
- case HII_KEY_ID_GOTO_PSID_REVERT:
- return HiiSelectDiskAction("Action: Revert to Factory Defaults with PSID", HiiKeyId);
-
- case HII_KEY_ID_GOTO_REVERT:
- return HiiSelectDiskAction("Action: Revert to Factory Defaults", HiiKeyId);
-
- case HII_KEY_ID_GOTO_DISABLE_USER:
- return HiiSelectDiskAction("Action: Disable User", HiiKeyId);
-
- case HII_KEY_ID_GOTO_ENABLE_FEATURE:
- return HiiSelectDiskAction("Action: Enable Feature", HiiKeyId);
-
- case HII_KEY_ID_ENTER_PASSWORD:
- return HiiPasswordEntered(Value->string);
-
- case HII_KEY_ID_ENTER_PSID:
- return HiiPsidRevert(Value->string);
-
- }
- } else if (Action == EFI_BROWSER_ACTION_CHANGED) {
- switch (HiiKeyId) {
- case HII_KEY_ID_BLOCKSID:
- switch (Value->u8) {
- case 0:
- PpRequest = TCG2_PHYSICAL_PRESENCE_NO_ACTION;
- break;
-
- case 1:
- PpRequest = TCG2_PHYSICAL_PRESENCE_ENABLE_BLOCK_SID;
- break;
-
- case 2:
- PpRequest = TCG2_PHYSICAL_PRESENCE_DISABLE_BLOCK_SID;
- break;
-
- case 3:
- PpRequest = TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_ENABLE_BLOCK_SID_FUNC_TRUE;
- break;
-
- case 4:
- PpRequest = TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_ENABLE_BLOCK_SID_FUNC_FALSE;
- break;
-
- case 5:
- PpRequest = TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_DISABLE_BLOCK_SID_FUNC_TRUE;
- break;
-
- case 6:
- PpRequest = TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_DISABLE_BLOCK_SID_FUNC_FALSE;
- break;
-
- default:
- PpRequest = TCG2_PHYSICAL_PRESENCE_NO_ACTION;
- DEBUG ((DEBUG_ERROR, "Invalid value input!\n"));
- break;
- }
- HiiSetBlockSidAction(PpRequest);
-
- *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
- return EFI_SUCCESS;
-
- default:
- break;
- }
- }
-
- return EFI_UNSUPPORTED;
-}
-
-/**
- Update the global Disk index info.
-
- @param Index The input disk index info.
-
- @retval EFI_SUCCESS Update the disk index info success.
-
-**/
-EFI_STATUS
-HiiSelectDisk(
- UINT8 Index
- )
-{
- OpalHiiGetBrowserData();
- gHiiConfiguration.SelectedDiskIndex = Index;
- OpalHiiSetBrowserData ();
-
- return EFI_SUCCESS;
-}
-
-/**
- Draws the disk info form.
-
- @retval EFI_SUCCESS Draw the disk info success.
-
-**/
-EFI_STATUS
-HiiPopulateDiskInfoForm(
- VOID
- )
-{
- OPAL_DISK* OpalDisk;
- OPAL_DISK_ACTIONS AvailActions;
- TCG_RESULT Ret;
- CHAR8 *DiskName;
-
- OpalHiiGetBrowserData();
-
- DiskName = HiiDiskGetNameCB (gHiiConfiguration.SelectedDiskIndex);
- if (DiskName == NULL) {
- return EFI_UNSUPPORTED;
- }
- HiiSetFormString(STRING_TOKEN(STR_DISK_INFO_SELECTED_DISK_NAME), DiskName);
-
- ZeroMem(gHiiConfiguration.Psid, sizeof(gHiiConfiguration.Psid));
-
- gHiiConfiguration.SelectedDiskAvailableActions = HII_ACTION_NONE;
-
- OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
-
- if (OpalDisk != NULL) {
- OpalDiskUpdateStatus (OpalDisk);
- Ret = OpalSupportGetAvailableActions(&OpalDisk->SupportedAttributes, &OpalDisk->LockingFeature, OpalDisk->Owner, &AvailActions);
- if (Ret == TcgResultSuccess) {
- //
- // Update actions, always allow PSID Revert
- //
- gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.PsidRevert == 1) ? HII_ACTION_PSID_REVERT : HII_ACTION_NONE;
-
- //
- // Always allow unlock to handle device migration
- //
- gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.Unlock == 1) ? HII_ACTION_UNLOCK : HII_ACTION_NONE;
-
- if (!OpalFeatureEnabled (&OpalDisk->SupportedAttributes, &OpalDisk->LockingFeature)) {
- if (OpalDisk->Owner == OpalOwnershipNobody) {
- gHiiConfiguration.SelectedDiskAvailableActions |= HII_ACTION_ENABLE_FEATURE;
-
- //
- // Update strings
- //
- HiiSetFormString( STRING_TOKEN(STR_DISK_INFO_PSID_REVERT), "PSID Revert to factory default");
- } else {
- DEBUG ((DEBUG_INFO, "Feature disabled but ownership != nobody\n"));
- }
- } else {
- gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.Revert == 1) ? HII_ACTION_REVERT : HII_ACTION_NONE;
- gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.AdminPass == 1) ? HII_ACTION_SET_ADMIN_PWD : HII_ACTION_NONE;
- gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.UserPass == 1) ? HII_ACTION_SET_USER_PWD : HII_ACTION_NONE;
- gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.SecureErase == 1) ? HII_ACTION_SECURE_ERASE : HII_ACTION_NONE;
- gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.DisableUser == 1) ? HII_ACTION_DISABLE_USER : HII_ACTION_NONE;
-
- HiiSetFormString (STRING_TOKEN(STR_DISK_INFO_PSID_REVERT), "PSID Revert to factory default and Disable");
-
- //
- // Determine revert options for disk
- // Default initialize keep user Data to be true
- //
- gHiiConfiguration.KeepUserData = 1;
- }
- }
- }
-
- //
- // Pass the current configuration to the BIOS
- //
- OpalHiiSetBrowserData ();
-
- return EFI_SUCCESS;
-}
-
-/**
- Reverts the Opal disk to factory default.
-
- @param PsidStringId The string id for the PSID info.
-
- @retval EFI_SUCCESS Do the required action success.
-
-**/
-EFI_STATUS
-HiiPsidRevert(
- EFI_STRING_ID PsidStringId
- )
-{
- CHAR8 Response[DEFAULT_RESPONSE_SIZE];
- TCG_PSID Psid;
- OPAL_DISK *OpalDisk;
- TCG_RESULT Ret;
- OPAL_SESSION Session;
- CHAR16 *UnicodeStr;
- UINT8 TmpBuf[PSID_CHARACTER_STRING_END_LENGTH];
-
- Ret = TcgResultFailure;
-
- UnicodeStr = HiiGetString (gHiiPackageListHandle, PsidStringId, NULL);
- ZeroMem (TmpBuf, sizeof (TmpBuf));
- UnicodeStrToAsciiStrS (UnicodeStr, (CHAR8*)TmpBuf, PSID_CHARACTER_STRING_END_LENGTH);
- CopyMem (Psid.Psid, TmpBuf, PSID_CHARACTER_LENGTH);
- HiiSetString (gHiiPackageListHandle, PsidStringId, L"", NULL);
- ZeroMem (TmpBuf, sizeof (TmpBuf));
- ZeroMem (UnicodeStr, StrSize (UnicodeStr));
- FreePool (UnicodeStr);
-
- OpalDisk = HiiGetOpalDiskCB (gHiiConfiguration.SelectedDiskIndex);
- if (OpalDisk != NULL) {
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = OpalDisk->Sscp;
- Session.MediaId = OpalDisk->MediaId;
- Session.OpalBaseComId = OpalDisk->OpalBaseComId;
-
- Ret = OpalSupportPsidRevert(&Session, Psid.Psid, (UINT32)sizeof(Psid.Psid), OpalDisk->OpalDevicePath);
- }
-
- ZeroMem (Psid.Psid, PSID_CHARACTER_LENGTH);
-
- if (Ret == TcgResultSuccess) {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "PSID Revert: Success" );
- } else {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "PSID Revert: Failure" );
- }
-
- HiiSetFormString(STRING_TOKEN(STR_ACTION_STATUS), Response);
-
- return EFI_SUCCESS;
-}
-
-/**
- Set password for the disk.
-
- @param OpalDisk The disk need to set the password.
- @param Password The input password.
- @param PassLength The input password length.
-
- @retval EFI_SUCCESS Do the required action success.
-
-**/
-EFI_STATUS
-HiiSetPassword(
- OPAL_DISK *OpalDisk,
- VOID *Password,
- UINT32 PassLength
- )
-{
- CHAR8 Response[DEFAULT_RESPONSE_SIZE];
- TCG_RESULT Ret;
- BOOLEAN ExistingPassword;
- OPAL_SESSION Session;
-
- ExistingPassword = FALSE;
-
- //
- // PassLength = 0 means check whether exist old password.
- //
- if (PassLength == 0) {
- ZeroMem(gHiiOldPassword, sizeof(gHiiOldPassword));
- gHiiOldPasswordLength = 0;
-
- if (gHiiConfiguration.SelectedAction == HII_KEY_ID_GOTO_ENABLE_FEATURE) {
- ExistingPassword = FALSE;
- } else if (gHiiConfiguration.SelectedAction == HII_KEY_ID_GOTO_SET_ADMIN_PWD) {
- ExistingPassword = OpalUtilAdminPasswordExists(OpalDisk->Owner, &OpalDisk->LockingFeature);
- } else if (gHiiConfiguration.SelectedAction == HII_KEY_ID_GOTO_SET_USER_PWD) {
- //
- // Set user Password option shall only be shown if an Admin Password exists
- // so a Password is always required (Admin or Existing User Password)
- //
- ExistingPassword = TRUE;
- }
-
- //
- // Return error if there is a previous Password
- // see UEFI 2.4 errata B, Figure 121. Password Flowchart
- //
- return ExistingPassword ? EFI_DEVICE_ERROR : EFI_SUCCESS;
- }
-
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = OpalDisk->Sscp;
- Session.MediaId = OpalDisk->MediaId;
- Session.OpalBaseComId = OpalDisk->OpalBaseComId;
-
- AsciiSPrint(Response, DEFAULT_RESPONSE_SIZE, "%a", "Set Password: Failure");
- //
- // Password entered.
- // No current Owner, so set new Password, must be admin Password
- //
- if (OpalDisk->Owner == OpalOwnershipNobody) {
- Ret = OpalSupportEnableOpalFeature (&Session, OpalDisk->Msid, OpalDisk->MsidLength,Password, PassLength, OpalDisk->OpalDevicePath);
- if (Ret == TcgResultSuccess) {
- AsciiSPrint(Response, DEFAULT_RESPONSE_SIZE, "%a", "Set Password: Success");
- }
-
- HiiSetFormString(STRING_TOKEN(STR_ACTION_STATUS), Response);
- return EFI_SUCCESS;
- }
-
- //
- // 1st Password entered
- //
- if (OpalDisk->Owner == OpalOwnershipUnknown && gHiiOldPasswordLength == 0) {
-
- //
- // Unknown ownership - prompt for old Password, then new
- // old Password is not set yet - first time through
- // assume authority provided is admin1, overwritten if user1 authority works below
- //
- if (gHiiConfiguration.SelectedAction == HII_KEY_ID_GOTO_SET_USER_PWD) {
- //
- // First try to login as USER1 to Locking SP to see if we're simply updating its Password
- //
- Ret = OpalUtilVerifyPassword (&Session, Password, PassLength, OPAL_LOCKING_SP_USER1_AUTHORITY);
- if (Ret == TcgResultSuccess) {
- //
- // User1 worked so authority 1 means user 1
- //
- CopyMem(gHiiOldPassword, Password, PassLength);
- gHiiOldPasswordLength = PassLength;
-
- return EFI_SUCCESS;
- }
- }
-
- //
- // Else try admin1 below
- //
- Ret = OpalUtilVerifyPassword (&Session, Password, PassLength, OPAL_LOCKING_SP_ADMIN1_AUTHORITY);
- if (Ret == TcgResultSuccess) {
- CopyMem(gHiiOldPassword, Password, PassLength);
- gHiiOldPasswordLength = PassLength;
-
- return EFI_SUCCESS;
- } else {
- DEBUG ((DEBUG_INFO, "start session with old PW failed - return EFI_NOT_READY - mistyped old PW\n"));
- HiiSetFormString(STRING_TOKEN(STR_ACTION_STATUS), "Authentication Failure");
-
- ZeroMem(gHiiOldPassword, sizeof(gHiiOldPassword));
- gHiiOldPasswordLength = 0;
-
- return EFI_NOT_READY;
- }
- }
-
- //
- // New Password entered
- //
- if (gHiiConfiguration.SelectedAction == HII_KEY_ID_GOTO_SET_USER_PWD) {
- Ret = OpalSupportSetPassword(
- &Session,
- gHiiOldPassword,
- gHiiOldPasswordLength,
- Password,
- PassLength,
- OpalDisk->OpalDevicePath,
- FALSE
- );
- } else {
- Ret = OpalSupportSetPassword(
- &Session,
- gHiiOldPassword,
- gHiiOldPasswordLength,
- Password,
- PassLength,
- OpalDisk->OpalDevicePath,
- TRUE
- );
- }
-
- if (Ret == TcgResultSuccess) {
- AsciiSPrint(Response, DEFAULT_RESPONSE_SIZE, "%a", "Set Password: Success");
- }
-
- //
- // Reset old Password storage
- //
- ZeroMem(gHiiOldPassword, sizeof(gHiiOldPassword));
- gHiiOldPasswordLength = 0;
-
- HiiSetFormString(STRING_TOKEN(STR_ACTION_STATUS), Response);
- return Ret == TcgResultSuccess ? EFI_SUCCESS : EFI_NOT_READY;
-}
-
-/**
- Secure Erases Opal Disk.
-
- @param OpalDisk The disk need to erase data.
- @param Password The input password.
- @param PassLength The input password length.
-
- @retval EFI_SUCCESS Do the required action success.
-
-**/
-EFI_STATUS
-HiiSecureErase(
- OPAL_DISK *OpalDisk,
- const VOID *Password,
- UINT32 PassLength
- )
-{
- CHAR8 Response[DEFAULT_RESPONSE_SIZE];
- BOOLEAN PasswordFailed;
- TCG_RESULT Ret;
- OPAL_SESSION AdminSpSession;
-
- if (PassLength == 0) {
- return EFI_DEVICE_ERROR; // return error to indicate there is an existing Password
- }
-
- ZeroMem(&AdminSpSession, sizeof(AdminSpSession));
- AdminSpSession.Sscp = OpalDisk->Sscp;
- AdminSpSession.MediaId = OpalDisk->MediaId;
- AdminSpSession.OpalBaseComId = OpalDisk->OpalBaseComId;
-
- Ret = OpalUtilSecureErase(&AdminSpSession, Password, PassLength, &PasswordFailed);
- if (Ret == TcgResultSuccess) {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "Secure Erase: Success" );
- } else {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "Secure Erase: Failure" );
- }
- HiiSetFormString(STRING_TOKEN(STR_ACTION_STATUS), Response);
-
- //
- // If Password failed, return invalid passowrd
- //
- if (PasswordFailed) {
- DEBUG ((DEBUG_INFO, "returning EFI_NOT_READY to indicate Password was not correct\n"));
- return EFI_NOT_READY;
- }
-
- //
- // Indicates Password was valid and is not changing to UEFI
- // Response string will indicate action error
- //
- return EFI_DEVICE_ERROR;
-}
-
-
-/**
- Disables User for Opal Disk.
-
- @param OpalDisk The disk need to the action.
- @param Password The input password.
- @param PassLength The input password length.
-
- @retval EFI_SUCCESS Do the required action success.
-
-**/
-EFI_STATUS
-HiiDisableUser(
- OPAL_DISK *OpalDisk,
- VOID *Password,
- UINT32 PassLength
- )
-{
- CHAR8 Response[ DEFAULT_RESPONSE_SIZE ];
- BOOLEAN PasswordFailed;
- TCG_RESULT Ret;
- OPAL_SESSION Session;
-
- if (PassLength == 0) {
- return EFI_DEVICE_ERROR; // return error to indicate there is an existing Password
- }
-
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = OpalDisk->Sscp;
- Session.MediaId = OpalDisk->MediaId;
- Session.OpalBaseComId = OpalDisk->OpalBaseComId;
-
- Ret = OpalSupportDisableUser(&Session, Password, PassLength, &PasswordFailed, OpalDisk->OpalDevicePath);
- if (Ret == TcgResultSuccess) {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "Disable User: Success" );
- } else {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "Disable User: Failure" );
- }
- HiiSetFormString (STRING_TOKEN(STR_ACTION_STATUS), Response);
-
- //
- // If Password failed, return invalid passowrd
- //
- if (PasswordFailed) {
- DEBUG ((DEBUG_INFO, "returning EFI_NOT_READY to indicate Password was not correct\n"));
- return EFI_NOT_READY;
- }
-
- //
- // Indicates Password was valid and is not changing to UEFI
- // Response string will indicate action error
- //
- return EFI_DEVICE_ERROR;
-}
-
-/**
- Revert Opal Disk as Admin1.
-
- @param OpalDisk The disk need to the action.
- @param Password The input password.
- @param PassLength The input password length.
- @param KeepUserData Whether need to keey user data.
-
- @retval EFI_SUCCESS Do the required action success.
-
-**/
-EFI_STATUS
-HiiRevert(
- OPAL_DISK *OpalDisk,
- VOID *Password,
- UINT32 PassLength,
- BOOLEAN KeepUserData
- )
-{
- CHAR8 Response[ DEFAULT_RESPONSE_SIZE ];
- BOOLEAN PasswordFailed;
- TCG_RESULT Ret;
- OPAL_SESSION Session;
-
- if (PassLength == 0) {
- DEBUG ((DEBUG_INFO, "Returning error to indicate there is an existing Password\n"));
- // return error to indicate there is an existing Password
- return EFI_DEVICE_ERROR;
- }
-
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = OpalDisk->Sscp;
- Session.MediaId = OpalDisk->MediaId;
- Session.OpalBaseComId = OpalDisk->OpalBaseComId;
-
- Ret = OpalSupportRevert(
- &Session,
- KeepUserData,
- Password,
- PassLength,
- OpalDisk->Msid,
- OpalDisk->MsidLength,
- &PasswordFailed,
- OpalDisk->OpalDevicePath
- );
- if (Ret == TcgResultSuccess) {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "Revert: Success" );
- } else {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "Revert: Failure" );
- }
- HiiSetFormString(STRING_TOKEN(STR_ACTION_STATUS), Response);
-
- //
- // If Password failed, return invalid passowrd
- //
- if (PasswordFailed) {
- DEBUG ((DEBUG_INFO, "returning EFI_NOT_READY to indicate Password was not correct\n"));
- return EFI_NOT_READY;
- }
-
- //
- // Indicates Password was valid and is not changing to UEFI
- // Response string will indicate action error
- //
- return EFI_DEVICE_ERROR;
-}
-
-/**
- Unlocks Opal Disk.
-
- @param OpalDisk The disk need to the action.
- @param Password The input password.
- @param PassLength The input password length.
-
- @retval EFI_SUCCESS Do the required action success.
-
-**/
-EFI_STATUS
-HiiUnlock(
- OPAL_DISK *OpalDisk,
- VOID *Password,
- UINT32 PassLength
- )
-{
- CHAR8 Response[DEFAULT_RESPONSE_SIZE];
- TCG_RESULT Ret;
- OPAL_SESSION Session;
-
- if (PassLength == 0) {
- DEBUG ((DEBUG_INFO, "Returning error to indicate there is an existing Password\n"));
- return EFI_DEVICE_ERROR; // return error to indicate there is an existing Password
- }
-
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = OpalDisk->Sscp;
- Session.MediaId = OpalDisk->MediaId;
- Session.OpalBaseComId = OpalDisk->OpalBaseComId;
-
- Ret = OpalSupportUnlock(&Session, Password, PassLength, OpalDisk->OpalDevicePath);
- if (Ret == TcgResultSuccess) {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "Unlock: Success" );
- } else {
- AsciiSPrint( Response, DEFAULT_RESPONSE_SIZE, "%a", "Unlock: Failure" );
- }
-
- HiiSetFormString(STRING_TOKEN(STR_ACTION_STATUS), Response);
-
- if (Ret == TcgResultSuccess) {
- DEBUG ((DEBUG_INFO, "returning error to indicate Password was correct but is not changing\n"));
- return EFI_DEVICE_ERROR;
- } else {
- DEBUG ((DEBUG_INFO, "returning EFI_NOT_READY to indicate Password was not correct\n"));
- return EFI_NOT_READY;
- }
-}
-
-/**
- Use the input password to do the specified action.
-
- @param Str The input password saved in.
-
- @retval EFI_SUCCESS Do the required action success.
- @retval Others Other error occur.
-
-**/
-EFI_STATUS
-HiiPasswordEntered(
- EFI_STRING_ID Str
- )
-{
- OPAL_DISK* OpalDisk;
- CHAR8 Password[MAX_PASSWORD_CHARACTER_LENGTH + 1];
- CHAR16* UniStr;
- UINT32 PassLength;
- EFI_STATUS Status;
-
- OpalHiiGetBrowserData();
-
- OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
- if (OpalDisk == NULL) {
- DEBUG ((DEBUG_INFO, "ERROR: disk %u not found\n", gHiiConfiguration.SelectedDiskIndex));
- return EFI_NOT_FOUND;
- }
-
- if (Str == 0) {
- DEBUG ((DEBUG_INFO, "ERROR: str=NULL\n"));
- return EFI_INVALID_PARAMETER;
- }
-
- ZeroMem(Password, sizeof(Password));
-
- UniStr = HiiGetString(gHiiPackageListHandle, Str, NULL);
- if (UniStr == NULL) {
- return EFI_NOT_FOUND;
- }
-
- HiiSetString(gHiiPackageListHandle, Str, L"", NULL);
-
- PassLength = (UINT32) StrLen (UniStr);
- if (PassLength >= sizeof(Password)) {
- HiiSetFormString(STRING_TOKEN(STR_ACTION_STATUS), "Password too long");
- ZeroMem (UniStr, StrSize (UniStr));
- FreePool(UniStr);
- return EFI_BUFFER_TOO_SMALL;
- }
-
- UnicodeStrToAsciiStrS (UniStr, Password, sizeof (Password));
- ZeroMem (UniStr, StrSize (UniStr));
- FreePool(UniStr);
-
- if (gHiiConfiguration.SelectedAction == HII_KEY_ID_GOTO_UNLOCK) {
- Status = HiiUnlock (OpalDisk, Password, PassLength);
- } else if (gHiiConfiguration.SelectedAction == HII_KEY_ID_GOTO_SECURE_ERASE) {
- Status = HiiSecureErase (OpalDisk, Password, PassLength);
- } else if (gHiiConfiguration.SelectedAction == HII_KEY_ID_GOTO_DISABLE_USER) {
- Status = HiiDisableUser (OpalDisk, Password, PassLength);
- } else if (gHiiConfiguration.SelectedAction == HII_KEY_ID_GOTO_REVERT) {
- if (OpalDisk->SupportedAttributes.PyriteSsc == 1 && OpalDisk->LockingFeature.MediaEncryption == 0) {
- //
- // For pyrite type device which also not supports media encryption, it not accept "Keep User Data" parameter.
- // So here hardcode a FALSE for this case.
- //
- Status = HiiRevert(OpalDisk, Password, PassLength, FALSE);
- } else {
- Status = HiiRevert(OpalDisk, Password, PassLength, gHiiConfiguration.KeepUserData);
- }
- } else {
- Status = HiiSetPassword(OpalDisk, Password, PassLength);
- }
-
- ZeroMem (Password, sizeof (Password));
-
- OpalHiiSetBrowserData ();
-
- return Status;
-}
-
-/**
- Send BlockSid request through TPM physical presence module.
-
- @param PpRequest TPM physical presence operation request.
-
- @retval EFI_SUCCESS Do the required action success.
- @retval Others Other error occur.
-
-**/
-EFI_STATUS
-HiiSetBlockSidAction (
- IN UINT32 PpRequest
- )
-{
- UINT32 ReturnCode;
- EFI_STATUS Status;
-
- ReturnCode = Tcg2PhysicalPresenceLibSubmitRequestToPreOSFunction (PpRequest, 0);
- if (ReturnCode == TCG_PP_SUBMIT_REQUEST_TO_PREOS_SUCCESS) {
- Status = EFI_SUCCESS;
- } else if (ReturnCode == TCG_PP_SUBMIT_REQUEST_TO_PREOS_GENERAL_FAILURE) {
- Status = EFI_OUT_OF_RESOURCES;
- } else if (ReturnCode == TCG_PP_SUBMIT_REQUEST_TO_PREOS_NOT_IMPLEMENTED) {
- Status = EFI_UNSUPPORTED;
- } else {
- Status = EFI_DEVICE_ERROR;
- }
-
- return Status;
-}
-
-/**
- This function processes the results of changes in configuration.
-
- @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
- @param Configuration A null-terminated Unicode string in <ConfigResp>
- format.
- @param Progress A pointer to a string filled in with the offset of
- the most recent '&' before the first failing
- name/value pair (or the beginning of the string if
- the failure is in the first name/value pair) or
- the terminating NULL if all was successful.
-
- @retval EFI_SUCCESS The Results is processed successfully.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_NOT_FOUND Routing data doesn't match any storage in this
- driver.
-
-**/
-EFI_STATUS
-EFIAPI
-RouteConfig(
- CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
- CONST EFI_STRING Configuration,
- EFI_STRING *Progress
- )
-{
- if (Configuration == NULL || Progress == NULL) {
- return (EFI_INVALID_PARAMETER);
- }
-
- *Progress = Configuration;
- if (!HiiIsConfigHdrMatch (Configuration, &gHiiSetupVariableGuid, OpalPasswordStorageName)) {
- return EFI_NOT_FOUND;
- }
-
- *Progress = Configuration + StrLen (Configuration);
-
- return EFI_SUCCESS;
-}
-
-/**
- This function allows a caller to extract the current configuration for one
- or more named elements from the target driver.
-
- @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
- @param Request A null-terminated Unicode string in
- <ConfigRequest> format.
- @param Progress On return, points to a character in the Request
- string. Points to the string's null terminator if
- request was successful. Points to the most recent
- '&' before the first failing name/value pair (or
- the beginning of the string if the failure is in
- the first name/value pair) if the request was not
- successful.
- @param Results A null-terminated Unicode string in
- <ConfigAltResp> format which has all values filled
- in for the names in the Request string. String to
- be allocated by the called function.
-
- @retval EFI_SUCCESS The Results is filled with the requested values.
- @retval EFI_OUT_OF_RESOURCES Not enough memory to store the results.
- @retval EFI_INVALID_PARAMETER Request is illegal syntax, or unknown name.
- @retval EFI_NOT_FOUND Routing data doesn't match any storage in this
- driver.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtractConfig(
- CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
- CONST EFI_STRING Request,
- EFI_STRING *Progress,
- EFI_STRING *Results
- )
-{
- EFI_STATUS Status;
- EFI_STRING ConfigRequest;
- EFI_STRING ConfigRequestHdr;
- UINTN BufferSize;
- UINTN Size;
- BOOLEAN AllocatedRequest;
- EFI_HANDLE DriverHandle;
-
- //
- // Check for valid parameters
- //
- if (Progress == NULL || Results == NULL) {
- return (EFI_INVALID_PARAMETER);
- }
-
- *Progress = Request;
- if ((Request != NULL) &&
- !HiiIsConfigHdrMatch (Request, &gHiiSetupVariableGuid, OpalPasswordStorageName)) {
- return EFI_NOT_FOUND;
- }
-
- AllocatedRequest = FALSE;
- BufferSize = sizeof (OPAL_HII_CONFIGURATION);
- ConfigRequest = Request;
- if ((Request == NULL) || (StrStr (Request, L"OFFSET") == NULL)) {
- //
- // Request has no request element, construct full request string.
- // Allocate and fill a buffer large enough to hold the <ConfigHdr> template
- // followed by "&OFFSET=0&WIDTH=WWWWWWWWWWWWWWWW" followed by a Null-terminator
- //
- DriverHandle = HiiGetDriverImageHandleCB();
- ConfigRequestHdr = HiiConstructConfigHdr (&gHiiSetupVariableGuid, OpalPasswordStorageName, DriverHandle);
- Size = (StrLen (ConfigRequestHdr) + 32 + 1) * sizeof (CHAR16);
- ConfigRequest = AllocateZeroPool (Size);
- if (ConfigRequest == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
- AllocatedRequest = TRUE;
- UnicodeSPrint (ConfigRequest, Size, L"%s&OFFSET=0&WIDTH=%016LX", ConfigRequestHdr, (UINT64)BufferSize);
- FreePool (ConfigRequestHdr);
- }
-
- //
- // Convert Buffer Data to <ConfigResp> by helper function BlockToConfig( )
- //
- Status = gHiiConfigRouting->BlockToConfig(
- gHiiConfigRouting,
- ConfigRequest,
- (UINT8*)&gHiiConfiguration,
- sizeof(OPAL_HII_CONFIGURATION),
- Results,
- Progress
- );
-
- //
- // Free the allocated config request string.
- //
- if (AllocatedRequest) {
- FreePool (ConfigRequest);
- ConfigRequest = NULL;
- }
-
- //
- // Set Progress string to the original request string.
- //
- if (Request == NULL) {
- *Progress = NULL;
- } else if (StrStr (Request, L"OFFSET") == NULL) {
- *Progress = Request + StrLen (Request);
- }
-
- return (Status);
-}
-
-
-/**
-
- Pass the current system state to the bios via the hii_G_Configuration.
-
-**/
-VOID
-OpalHiiSetBrowserData (
- VOID
- )
-{
- HiiSetBrowserData(
- &gHiiSetupVariableGuid,
- (CHAR16*)L"OpalHiiConfig",
- sizeof(gHiiConfiguration),
- (UINT8*)&gHiiConfiguration,
- NULL
- );
-}
-
-
-/**
-
- Populate the hii_g_Configuraton with the browser Data.
-
-**/
-VOID
-OpalHiiGetBrowserData (
- VOID
- )
-{
- HiiGetBrowserData(
- &gHiiSetupVariableGuid,
- (CHAR16*)L"OpalHiiConfig",
- sizeof(gHiiConfiguration),
- (UINT8*)&gHiiConfiguration
- );
-}
-
-/**
- Set a string Value in a form.
-
- @param DestStringId The stringid which need to update.
- @param SrcAsciiStr The string nned to update.
-
- @retval EFI_SUCCESS Do the required action success.
- @retval Others Other error occur.
-
-**/
-EFI_STATUS
-HiiSetFormString(
- EFI_STRING_ID DestStringId,
- CHAR8 *SrcAsciiStr
- )
-{
- UINT32 Len;
- UINT32 UniSize;
- CHAR16* UniStr;
-
- //
- // Determine the Length of the sting
- //
- Len = ( UINT32 )AsciiStrLen( SrcAsciiStr );
-
- //
- // Allocate space for the unicode string, including terminator
- //
- UniSize = (Len + 1) * sizeof(CHAR16);
- UniStr = (CHAR16*)AllocateZeroPool(UniSize);
-
- //
- // Copy into unicode string, then copy into string id
- //
- AsciiStrToUnicodeStrS ( SrcAsciiStr, UniStr, Len + 1);
-
- //
- // Update the string in the form
- //
- if (HiiSetString(gHiiPackageListHandle, DestStringId, UniStr, NULL) == 0) {
- DEBUG ((DEBUG_INFO, "HiiSetFormString( ) failed\n"));
- FreePool(UniStr);
- return (EFI_OUT_OF_RESOURCES);
- }
-
- //
- // Free the memory
- //
- FreePool(UniStr);
-
- return (EFI_SUCCESS);
-}
-
-/**
- Initialize the Opal disk base on the hardware info get from device.
-
- @param Dev The Opal device.
-
- @retval EFI_SUCESS Initialize the device success.
- @retval EFI_DEVICE_ERROR Get info from device failed.
-
-**/
-EFI_STATUS
-OpalDiskInitialize (
- IN OPAL_DRIVER_DEVICE *Dev
- )
-{
- TCG_RESULT TcgResult;
- OPAL_SESSION Session;
-
- ZeroMem(&Dev->OpalDisk, sizeof(OPAL_DISK));
- Dev->OpalDisk.Sscp = Dev->Sscp;
- Dev->OpalDisk.MediaId = Dev->MediaId;
- Dev->OpalDisk.OpalDevicePath = Dev->OpalDevicePath;
-
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = Dev->Sscp;
- Session.MediaId = Dev->MediaId;
-
- TcgResult = OpalGetSupportedAttributesInfo (&Session, &Dev->OpalDisk.SupportedAttributes, &Dev->OpalDisk.OpalBaseComId);
- if (TcgResult != TcgResultSuccess) {
- return EFI_DEVICE_ERROR;
- }
- Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
-
- TcgResult = OpalUtilGetMsid (&Session, Dev->OpalDisk.Msid, OPAL_MSID_LENGHT, &Dev->OpalDisk.MsidLength);
- if (TcgResult != TcgResultSuccess) {
- return EFI_DEVICE_ERROR;
- }
-
- return OpalDiskUpdateStatus (&Dev->OpalDisk);
-}
-
-/**
- Update the device info.
-
- @param OpalDisk The Opal device.
-
- @retval EFI_SUCESS Initialize the device success.
- @retval EFI_DEVICE_ERROR Get info from device failed.
- @retval EFI_INVALID_PARAMETER Not get Msid info before get ownership info.
-
-**/
-EFI_STATUS
-OpalDiskUpdateStatus (
- OPAL_DISK *OpalDisk
- )
-{
- TCG_RESULT TcgResult;
- OPAL_SESSION Session;
-
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = OpalDisk->Sscp;
- Session.MediaId = OpalDisk->MediaId;
- Session.OpalBaseComId = OpalDisk->OpalBaseComId;
-
- TcgResult = OpalGetLockingInfo(&Session, &OpalDisk->LockingFeature);
- if (TcgResult != TcgResultSuccess) {
- return EFI_DEVICE_ERROR;
- }
-
- if (OpalDisk->MsidLength == 0) {
- return EFI_INVALID_PARAMETER;
- } else {
- //
- // Base on the Msid info to get the ownership, so Msid info must get first.
- //
- OpalDisk->Owner = OpalUtilDetermineOwnership(&Session, OpalDisk->Msid, OpalDisk->MsidLength);
- }
-
- return EFI_SUCCESS;
-}
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.h b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.h
deleted file mode 100644
index c03f0827807f..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHii.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/** @file
- Public Header file of HII library used by Opal UEFI Driver.
- Defines required callbacks of Opal HII library.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _OPAL_HII_H_
-#define _OPAL_HII_H_
-
-#include <Library/OpalPasswordSupportLib.h>
-#include <OpalDriverPrivate.h>
-
-#define DEFAULT_RESPONSE_SIZE 200
-
-/**
- Get the driver image handle.
-
- @retval the driver image handle.
-
-**/
-EFI_HANDLE
-HiiGetDriverImageHandleCB(
- VOID
- );
-
-/**
- Install the HII form and string packages.
-
- @retval EFI_SUCCESS Install all the resources success.
- @retval EFI_OUT_OF_RESOURCES Out of resource error.
-**/
-EFI_STATUS
-OpalHiiAddPackages(
- VOID
- );
-
-/**
- Check whether enable feature or not.
-
- @retval Return the disk number.
-
-**/
-UINT8
-HiiGetNumConfigRequiredOpalDisksCB(
- VOID
- );
-
-/**
- Returns the driver name.
-
- @retval Returns the driver name.
-
-**/
-CHAR16*
-HiiGetDriverNameCB(
- VOID
- );
-
-/**
- Returns the opaque pointer to a physical disk context.
-
- @param DiskIndex Input the disk index.
-
- @retval The device pointer.
-
-**/
-OPAL_DISK*
-HiiGetOpalDiskCB(
- UINT8 DiskIndex
- );
-
-/**
- Returns the disk name.
-
- @param DiskIndex Input the disk index.
-
- @retval Returns the disk name.
-
-**/
-CHAR8*
-HiiDiskGetNameCB(
- UINT8 DiskIndex
- );
-
-/**
- Set a string Value in a form.
-
- @param DestStringId The stringid which need to update.
- @param SrcAsciiStr The string nned to update.
-
- @retval EFI_SUCCESS Do the required action success.
- @retval Others Other error occur.
-
-**/
-EFI_STATUS
-HiiSetFormString(
- EFI_STRING_ID DestStringId,
- CHAR8 *SrcAsciiStr
- );
-
-/**
- Install the HII related resources.
-
- @retval EFI_SUCCESS Install all the resources success.
- @retval other Error occur when install the resources.
-**/
-EFI_STATUS
-HiiInstall(
- VOID
- );
-
-/**
- Uninstall the HII capability.
-
- @retval EFI_SUCCESS Uninstall all the resources success.
- @retval others Other errors occur when unistall the hii resource.
-**/
-EFI_STATUS
-HiiUninstall(
- VOID
- );
-
-/**
- Initialize the Opal disk base on the hardware info get from device.
-
- @param Dev The Opal device.
-
- @retval EFI_SUCESS Initialize the device success.
- @retval EFI_DEVICE_ERROR Get info from device failed.
-
-**/
-EFI_STATUS
-OpalDiskInitialize (
- IN OPAL_DRIVER_DEVICE *Dev
- );
-
-#endif // _HII_H_
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiCallbacks.c b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiCallbacks.c
deleted file mode 100644
index 6f2eaeb4c3fe..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiCallbacks.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/** @file
- Callbacks required by the HII of the Opal UEFI Driver to help display
- Opal device information and to send password to SMM handler.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "OpalHii.h"
-#include "OpalDriver.h"
-#include "OpalDriverPrivate.h"
-
-/**
- Get Opal var name.
- The return Value must be freed by caller if not NULL
-
- @param OpalDisk The disk.
- @param Prefix The prefix string.
-
- @retval The var name string.
-
-**/
-CHAR16*
-OpalDriverGetOpalVarName(
- OPAL_DISK *OpalDisk,
- const CHAR16 *Prefix
- )
-{
- OPAL_DRIVER_DEVICE* Dev;
- UINTN PrefixLen;
- UINTN NameLen;
- UINTN VarNameLen;
- CHAR16* VarName;
-
- Dev = DRIVER_DEVICE_FROM_OPALDISK(OpalDisk);
- if (Dev == NULL) {
- return NULL;
- }
-
- PrefixLen = StrLen(Prefix);
-
- NameLen = 0;
- if (Dev->Name16 != NULL) {
- NameLen = StrLen(Dev->Name16);
- }
-
- VarNameLen = PrefixLen + NameLen;
-
- VarName = (CHAR16*)AllocateZeroPool((VarNameLen + 1) * sizeof(CHAR16));
- if (VarName == NULL) {
- return NULL;
- }
-
- CopyMem(VarName, Prefix, PrefixLen * sizeof(CHAR16));
- if (Dev->Name16 != NULL) {
- CopyMem(VarName + PrefixLen, Dev->Name16, NameLen * sizeof(CHAR16));
- }
- VarName[VarNameLen] = 0;
-
- return VarName;
-}
-
-/**
- Get the driver image handle.
-
- @retval the driver image handle.
-
-**/
-EFI_HANDLE
-HiiGetDriverImageHandleCB(
- VOID
- )
-{
- return gImageHandle;
-}
-
-/**
- Check whether enable feature or not.
-
- @retval Return the disk number.
-
-**/
-UINT8
-HiiGetNumConfigRequiredOpalDisksCB(
- VOID
- )
-{
- UINT8 NumDisks;
- UINT8 NumLockedOpalDisks;
- OPAL_DISK *OpalDisk;
- UINT8 Index;
-
- NumLockedOpalDisks = 0;
-
- NumDisks = GetDeviceCount();
-
- for (Index = 0; Index < NumDisks; Index++) {
- OpalDisk = HiiGetOpalDiskCB(Index);
-
- if (OpalDisk != NULL) {
- if (!OpalFeatureEnabled (&OpalDisk->SupportedAttributes, &OpalDisk->LockingFeature)) {
- DEBUG ((DEBUG_INFO, "Ignoring disk %u because feature is disabled or health has already been inspected\n", Index));
- } else if (OpalDeviceLocked (&OpalDisk->SupportedAttributes, &OpalDisk->LockingFeature)) {
- NumLockedOpalDisks++;
- }
- }
- }
-
- return NumLockedOpalDisks;
-}
-
-
-
-/**
- Returns the opaque pointer to a physical disk context.
-
- @param DiskIndex Input the disk index.
-
- @retval The device pointer.
-
-**/
-VOID *
-HiiGetDiskContextCB(
- UINT8 DiskIndex
- )
-{
- OPAL_DRIVER_DEVICE* Dev;
- UINT8 CurrentDisk;
-
- Dev = OpalDriverGetDeviceList();
- CurrentDisk = 0;
-
- if (DiskIndex >= GetDeviceCount()) {
- return NULL;
- }
-
- while (Dev != NULL) {
- if (CurrentDisk == DiskIndex) {
- return Dev;
- } else {
- Dev = Dev->Next;
- CurrentDisk++;
- }
- }
-
- return NULL;
-}
-
-/**
- Returns the opaque pointer to a physical disk context.
-
- @param DiskIndex Input the disk index.
-
- @retval The device pointer.
-
-**/
-OPAL_DISK*
-HiiGetOpalDiskCB(
- UINT8 DiskIndex
- )
-{
- VOID *Ctx;
- OPAL_DRIVER_DEVICE *Tmp;
-
- Ctx = HiiGetDiskContextCB (DiskIndex);
-
- if (Ctx == NULL) {
- return NULL;
- }
-
- Tmp = (OPAL_DRIVER_DEVICE*) Ctx;
-
- return &Tmp->OpalDisk;
-}
-
-/**
- Returns the disk name.
-
- @param DiskIndex Input the disk index.
-
- @retval Returns the disk name.
-
-**/
-CHAR8*
-HiiDiskGetNameCB(
- UINT8 DiskIndex
- )
-{
- OPAL_DRIVER_DEVICE* Ctx;
-
- Ctx = (OPAL_DRIVER_DEVICE*) HiiGetDiskContextCB (DiskIndex);
-
- if (Ctx != NULL) {
- if (Ctx->NameZ == NULL) {
- OpalDriverGetDriverDeviceName (Ctx);
- }
- return Ctx->NameZ;
- }
- return NULL;
-}
-
-/**
- Returns the driver name.
-
- @retval Returns the driver name.
-
-**/
-CHAR16*
-HiiGetDriverNameCB(
- VOID
- )
-{
- return (CHAR16*)EFI_DRIVER_NAME_UNICODE;
-}
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiFormStrings.uni b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiFormStrings.uni
deleted file mode 100644
index 4cfbde3f847e..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiFormStrings.uni
+++ /dev/null
@@ -1,103 +0,0 @@
-// /** @file
-//
-// String definitions for Setup formset.
-//
-// Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-//
-// This program and the accompanying materials
-// are licensed and made available under the terms and conditions of the BSD License
-// which accompanies this distribution. The full text of the license may be found at
-// http://opensource.org/licenses/bsd-license.php
-//
-// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-//
-// **/
-
-/=#
-///////////////////////////////// GENERIC DEFINITIONS /////////////////////////////////
-#langdef en-US "English"
-#string STR_NULL #language en-US " "
-
-///////////////////////////////// FORM SET /////////////////////////////////
-#string STR_FORM_SET_HELP #language en-US "Manage Opal disks"
-
-///////////////////////////////// MULTIPLE FORMS /////////////////////////////////
-#string STR_OPAL #language en-US "Opal"
-#string STR_MAIN_OPAL_VERSION #language en-US "Version 00.0.0.0000"
-
-///////////////////////////////// MAIN MENU FORM /////////////////////////////////
-#string STR_MAIN_PHY_DISKS_LBL #language en-US "Physical Disks:"
-#string STR_MAIN_LOCKED_DISKS_LBL #language en-US "Locked Disks:"
-
-#string STR_MAIN_GOTO_DISK_INFO_0 #language en-US " "
-#string STR_MAIN_GOTO_DISK_INFO_1 #language en-US " "
-#string STR_MAIN_GOTO_DISK_INFO_2 #language en-US " "
-#string STR_MAIN_GOTO_DISK_INFO_3 #language en-US " "
-#string STR_MAIN_GOTO_DISK_INFO_4 #language en-US " "
-#string STR_MAIN_GOTO_DISK_INFO_5 #language en-US " "
-
-#string STR_MAIN_GOTO_DISK_INFO_HELP #language en-US "Select to see Opal disk actions"
-#string STR_MAIN_GOTO_DISK_HEALTH_HELP #language en-US "Select disk to unlock"
-
-#string STR_MAIN_NO_DISKS_PRESENT_LBL #language en-US "No disks connected to system"
-
-///////////////////////////////// DISK INFO MENU FORM /////////////////////////////////
-#string STR_DISK_INFO_SELECTED_DISK_NAME #language en-US " "
-
-#string STR_DISK_INFO_LOCK #language en-US "Lock"
-#string STR_DISK_INFO_UNLOCK #language en-US "Unlock"
-#string STR_DISK_INFO_SET_ADMIN_PSWD #language en-US "Update Drive Admin Password"
-#string STR_DISK_INFO_SET_USER_PSWD #language en-US "Set Drive User Password"
-#string STR_DISK_INFO_SECURE_ERASE #language en-US "Secure Erase User Data"
-#string STR_DISK_INFO_PSID_REVERT #language en-US "PSID Revert to factory default"
-#string STR_DISK_INFO_REVERT #language en-US "Admin Revert to factory default and Disable"
-#string STR_DISK_INFO_DISABLE_USER #language en-US "Disable User"
-#string STR_DISK_INFO_ENABLE_FEATURE #language en-US "Enable Feature"
-#string STR_DISK_INFO_ENABLE_BLOCKSID #language en-US "TCG Storage Action"
-#string STR_ENABLED #language en-US "Enable BlockSID"
-#string STR_DISABLED #language en-US "Disable BlockSID"
-
-#string STR_NONE #language en-US "None"
-#string STR_DISK_INFO_ENABLE_BLOCKSID_TRUE #language en-US "Require physical presence when remote enable BlockSID"
-#string STR_DISK_INFO_ENABLE_BLOCKSID_FALSE #language en-US "Not require physical presence when remote enable BlockSID"
-#string STR_DISK_INFO_DISABLE_BLOCKSID_TRUE #language en-US "Require physical presence when remote disable BlockSID"
-#string STR_DISK_INFO_DISABLE_BLOCKSID_FALSE #language en-US "Not require physical presence when remote disable BlockSID"
-
-#string STR_BLOCKSID_STATUS_HELP #language en-US "BlockSID action change status"
-#string STR_BLOCKSID_STATUS #language en-US "Current BlockSID Status:"
-#string STR_BLOCKSID_STATUS1 #language en-US ""
-#string STR_BLOCKSID_STATUS2 #language en-US ""
-#string STR_BLOCKSID_STATUS3 #language en-US ""
-
-#string STR_DISK_INFO_GOTO_LOCK_HELP #language en-US "Lock the disk"
-#string STR_DISK_INFO_GOTO_UNLOCK_HELP #language en-US "Unlock the disk"
-#string STR_DISK_INFO_GOTO_SET_ADMIN_PSWD_HELP #language en-US "Set password for the administrator"
-#string STR_DISK_INFO_GOTO_SET_USER_PSWD_HELP #language en-US "Set password for User 1"
-#string STR_DISK_INFO_GOTO_SECURE_ERASE_HELP #language en-US "Securely erase the disk"
-#string STR_DISK_INFO_GOTO_PSID_REVERT_HELP #language en-US "Revert the disk to factory defaults"
-#string STR_DISK_INFO_GOTO_DISABLE_USER_HELP #language en-US "Disable User"
-#string STR_DISK_INFO_GOTO_ENABLE_FEATURE_HELP #language en-US "Enable Feature"
-#string STR_DISK_INFO_GOTO_ENABLE_BLOCKSID_HELP #language en-US "Change BlockSID actions, includes enable or disable BlockSID, Require or not require physical presence when remote enable or disable BlockSID"
-
-///////////////////////////////// DISK ACTION MENU FORM /////////////////////////////////
-#string STR_DISK_ACTION_LBL #language en-US " "
-
-#string STR_PASSWORD_PROMPT #language en-US "Enter Password"
-#string STR_PASSWORD_HELP #language en-US "Password must be between 6 and 20 characters"
-
-#string STR_REVERT_PROMPT #language en-US "Enter PSID"
-#string STR_REVERT_HELP #language en-US "PSID is a 32 character case sensitive value"
-#string STR_ACTION_STATUS #language en-US " "
-
-#string STR_PASSWORD_SUBMIT #language en-US "Submit Password Changes"
-#string STR_PASSWORD_SUBMIT_HELP #language en-US "Submits Password Changes (new and update) after passwords have been entered"
-
-#string STR_GOTO_HOME #language en-US "Main Menu"
-#string STR_GOTO_HOME_HELP #language en-US "Return to the main menu"
-
-#string STR_KEEP_USER_DATA_PROMPT #language en-US "Keep User Data"
-#string STR_KEEP_USER_DATA_HELP #language en-US "Checkmark to keep user data, otherwise data will be lost"
-
-#string STR_OK #language en-US "OK"
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiFormValues.h b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiFormValues.h
deleted file mode 100644
index 88cf9f5b59dd..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiFormValues.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/** @file
- Defines Opal HII form ids, structures and values.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#ifndef _OPAL_HII_FORM_VALUES_H_
-#define _OPAL_HII_FORM_VALUES_H_
-
-// Maximum Opal password Length
-#define MAX_PASSWORD_CHARACTER_LENGTH 0x14
-
-// PSID Length
-#define PSID_CHARACTER_LENGTH 0x20
-#define PSID_CHARACTER_STRING_END_LENGTH 0x21
-
-// ID's for various forms that will be used by HII
-#define FORMID_VALUE_MAIN_MENU 0x01
-#define FORMID_VALUE_DISK_INFO_FORM_MAIN 0x02
-#define FORMID_VALUE_DISK_ACTION_FORM 0x03
-
-// Structure defining the OPAL_HII_CONFIGURATION
-#pragma pack(1)
-typedef struct {
- UINT8 NumDisks;
- UINT8 SelectedDiskIndex;
- UINT8 SelectedAction;
- UINT16 SelectedDiskAvailableActions;
- UINT16 SupportedDisks;
- UINT8 KeepUserData;
- UINT16 AvailableFields;
- UINT16 Password[MAX_PASSWORD_CHARACTER_LENGTH];
- UINT16 Psid[PSID_CHARACTER_STRING_END_LENGTH];
- UINT8 EnableBlockSid;
-} OPAL_HII_CONFIGURATION;
-#pragma pack()
-
-/* Action Flags */
-#define HII_ACTION_NONE 0x0000
-#define HII_ACTION_LOCK 0x0001
-#define HII_ACTION_UNLOCK 0x0002
-#define HII_ACTION_SET_ADMIN_PWD 0x0004
-#define HII_ACTION_SET_USER_PWD 0x0008
-#define HII_ACTION_SECURE_ERASE 0x0010
-#define HII_ACTION_PSID_REVERT 0x0020
-#define HII_ACTION_DISABLE_USER 0x0040
-#define HII_ACTION_REVERT 0x0080
-#define HII_ACTION_DISABLE_FEATURE 0x0100
-#define HII_ACTION_ENABLE_FEATURE 0x0200
-
-/* Flags for diskActionAvailableFields */
-#define HII_FIELD_PASSWORD 0x0001
-#define HII_FIELD_PSID 0x0002
-#define HII_FIELD_KEEP_USER_DATA 0x0004
-#define HII_FIELD_KEEP_USER_DATA_FORCED 0x0008
-
-/* Number of bits allocated for each part of a unique key for an HII_ITEM
- * all bits together must be <= 16 (EFI_QUESTION_ID is UINT16)
- * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
- * | |-----------------------| |---------------------------|
- * FLG INDEX ID
- */
-#define HII_KEY_ID_BITS 8
-#define HII_KEY_INDEX_BITS 7
-#define HII_KEY_FLAG_BITS 1
-
-#define HII_KEY_FLAG 0x8000 // bit 15 (zero based)
-
-/***********/
-/* Key IDs */
-/***********/
-
-#define HII_KEY_ID_GOTO_MAIN_MENU 0
-#define HII_KEY_ID_GOTO_DISK_INFO 1
-#define HII_KEY_ID_GOTO_LOCK 2
-#define HII_KEY_ID_GOTO_UNLOCK 3
-#define HII_KEY_ID_GOTO_SET_ADMIN_PWD 4
-#define HII_KEY_ID_GOTO_SET_USER_PWD 5
-#define HII_KEY_ID_GOTO_SECURE_ERASE 6
-#define HII_KEY_ID_GOTO_PSID_REVERT 7
-#define HII_KEY_ID_GOTO_REVERT 8
-#define HII_KEY_ID_GOTO_DISABLE_USER 9
-#define HII_KEY_ID_GOTO_ENABLE_FEATURE 0xA //10
-#define HII_KEY_ID_GOTO_CONFIRM_TO_MAIN_MENU 0xB //11
-#define HII_KEY_ID_ENTER_PASSWORD 0xC //12
-#define HII_KEY_ID_ENTER_PSID 0xD //13
-#define HII_KEY_ID_VAR_SUPPORTED_DISKS 0xE //14
-#define HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS 0xF //15
-
-#define HII_KEY_ID_BLOCKSID 0x17 //23
-#define HII_KEY_ID_MAX 0x17 //23 // !!Update each time a new ID is added!!
-
-#define HII_KEY_WITH_INDEX(id, index) \
- ( \
- HII_KEY_FLAG | \
- (id) | \
- ((index) << HII_KEY_ID_BITS) \
- )
-
-#define HII_KEY(id) HII_KEY_WITH_INDEX(id, 0)
-
-#define PACKAGE_LIST_GUID { 0xf0308176, 0x9058, 0x4153, { 0x93, 0x3d, 0xda, 0x2f, 0xdc, 0xc8, 0x3e, 0x44 } }
-
-/* {410483CF-F4F9-4ece-848A-1958FD31CEB7} */
-#define SETUP_FORMSET_GUID { 0x410483cf, 0xf4f9, 0x4ece, { 0x84, 0x8a, 0x19, 0x58, 0xfd, 0x31, 0xce, 0xb7 } }
-
-// {BBF1ACD2-28D8-44ea-A291-58A237FEDF1A}
-#define SETUP_VARIABLE_GUID { 0xbbf1acd2, 0x28d8, 0x44ea, { 0xa2, 0x91, 0x58, 0xa2, 0x37, 0xfe, 0xdf, 0x1a } }
-
-#endif //_HII_FORM_VALUES_H_
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiPrivate.h b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiPrivate.h
deleted file mode 100644
index ec5a93cf3f3e..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalHiiPrivate.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/** @file
- Private functions and sturctures used by the Opal UEFI Driver.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _OPAL_HII_PRIVATE_H_
-#define _OPAL_HII_PRIVATE_H_
-
-
-
-#include <Library/OpalPasswordSupportLib.h>
-#include <Protocol/HiiConfigAccess.h>
-
-#include "OpalHii.h"
-#include "OpalHiiFormValues.h"
-
-
-#define OPAL_PASSWORD_CONFIG_GUID \
- { \
- 0x0d510a4f, 0xa81b, 0x473f, { 0x87, 0x07, 0xb7, 0xfd, 0xfb, 0xc0, 0x45, 0xba } \
- }
-
-#pragma pack(1)
-
-typedef struct {
- UINT16 Id: HII_KEY_ID_BITS;
- UINT16 Index: HII_KEY_INDEX_BITS;
- UINT16 Flag: HII_KEY_FLAG_BITS;
-} KEY_BITS;
-
-typedef union {
- UINT16 Raw;
- KEY_BITS KeyBits;
-} HII_KEY;
-
-typedef struct {
- VENDOR_DEVICE_PATH VendorDevicePath;
- EFI_DEVICE_PATH_PROTOCOL End;
-} HII_VENDOR_DEVICE_PATH;
-
-/**
-* Opal PSID Authority utilized for PSID revert
-*
-* The type indicates the structure of the PSID authority
-*/
-typedef struct {
- UINT8 Psid[PSID_CHARACTER_LENGTH];
-} TCG_PSID;
-
-/**
- This function processes the results of changes in configuration.
-
- @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
- @param Configuration A null-terminated Unicode string in <ConfigResp>
- format.
- @param Progress A pointer to a string filled in with the offset of
- the most recent '&' before the first failing
- name/value pair (or the beginning of the string if
- the failure is in the first name/value pair) or
- the terminating NULL if all was successful.
-
- @retval EFI_SUCCESS The Results is processed successfully.
- @retval EFI_INVALID_PARAMETER Configuration is NULL.
- @retval EFI_NOT_FOUND Routing data doesn't match any storage in this
- driver.
-
-**/
-EFI_STATUS
-EFIAPI
-RouteConfig(
- CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
- CONST EFI_STRING Configuration,
- EFI_STRING *Progress
- );
-
-/**
- This function allows a caller to extract the current configuration for one
- or more named elements from the target driver.
-
- @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
- @param Request A null-terminated Unicode string in
- <ConfigRequest> format.
- @param Progress On return, points to a character in the Request
- string. Points to the string's null terminator if
- request was successful. Points to the most recent
- '&' before the first failing name/value pair (or
- the beginning of the string if the failure is in
- the first name/value pair) if the request was not
- successful.
- @param Results A null-terminated Unicode string in
- <ConfigAltResp> format which has all values filled
- in for the names in the Request string. String to
- be allocated by the called function.
-
- @retval EFI_SUCCESS The Results is filled with the requested values.
- @retval EFI_OUT_OF_RESOURCES Not enough memory to store the results.
- @retval EFI_INVALID_PARAMETER Request is illegal syntax, or unknown name.
- @retval EFI_NOT_FOUND Routing data doesn't match any storage in this
- driver.
-
-**/
-EFI_STATUS
-EFIAPI
-ExtractConfig(
- CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
- CONST EFI_STRING Request,
- EFI_STRING *Progress,
- EFI_STRING *Results
- );
-
-/**
- This function processes the results of changes in configuration.
-
- @param This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
- @param Action Specifies the type of action taken by the browser.
- @param QuestionId A unique value which is sent to the original
- exporting driver so that it can identify the type
- of data to expect.
- @param Type The type of value for the question.
- @param Value A pointer to the data being sent to the original
- exporting driver.
- @param ActionRequest On return, points to the action requested by the
- callback function.
-
- @retval EFI_SUCCESS The callback successfully handled the action.
- @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the
- variable and its data.
- @retval EFI_DEVICE_ERROR The variable could not be saved.
- @retval EFI_UNSUPPORTED The specified Action is not supported by the
- callback.
-
-**/
-EFI_STATUS
-EFIAPI
-DriverCallback(
- CONST EFI_HII_CONFIG_ACCESS_PROTOCOL* This,
- EFI_BROWSER_ACTION Action,
- EFI_QUESTION_ID QuestionId,
- UINT8 Type,
- EFI_IFR_TYPE_VALUE* Value,
- EFI_BROWSER_ACTION_REQUEST* ActionRequest
- );
-
-/**
-
- Pass the current system state to the bios via the hii_G_Configuration.
-
-**/
-VOID
-OpalHiiSetBrowserData (
- VOID
- );
-
-/**
-
- Populate the hii_g_Configuraton with the browser Data.
-
-**/
-VOID
-OpalHiiGetBrowserData (
- VOID
- );
-
-/**
- Draws the disk info form.
-
- @retval EFI_SUCCESS Draw the disk info success.
-
-**/
-EFI_STATUS
-HiiPopulateDiskInfoForm(
- VOID
- );
-
-/**
- Update the global Disk index info.
-
- @param Index The input disk index info.
-
- @retval EFI_SUCCESS Update the disk index info success.
-
-**/
-EFI_STATUS
-HiiSelectDisk(
- UINT8 Index
- );
-
-/**
- Use the input password to do the specified action.
-
- @param Str The input password saved in.
-
- @retval EFI_SUCCESS Do the required action success.
- @retval Others Other error occur.
-
-**/
-EFI_STATUS
-HiiPasswordEntered(
- EFI_STRING_ID Str
- );
-
-/**
- Update block sid info.
-
- @param PpRequest Input the Pp Request.
-
- @retval EFI_SUCCESS Do the required action success.
- @retval Others Other error occur.
-
-**/
-EFI_STATUS
-HiiSetBlockSidAction (
- UINT32 PpRequest
- );
-
-/**
- Reverts the Opal disk to factory default.
-
- @param PsidStringId The string id for the PSID info.
-
- @retval EFI_SUCCESS Do the required action success.
-
-**/
-EFI_STATUS
-HiiPsidRevert(
- EFI_STRING_ID PsidStringId
- );
-
-/**
- Get disk name string id.
-
- @param DiskIndex The input disk index info.
-
- @retval The disk name string id.
-
-**/
-EFI_STRING_ID
-GetDiskNameStringId(
- UINT8 DiskIndex
- );
-
-/**
- Update the device info.
-
- @param OpalDisk The Opal device.
-
- @retval EFI_SUCESS Initialize the device success.
- @retval EFI_DEVICE_ERROR Get info from device failed.
- @retval EFI_INVALID_PARAMETER Not get Msid info before get ownership info.
-
-**/
-EFI_STATUS
-OpalDiskUpdateStatus (
- OPAL_DISK *OpalDisk
- );
-
-#pragma pack()
-
-#endif // _HII_P_H_
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordDxe.inf b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordDxe.inf
deleted file mode 100644
index f2afc378108c..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordDxe.inf
+++ /dev/null
@@ -1,82 +0,0 @@
-## @file
-# This is a OpalPasswordDxe driver.
-#
-# This module is used to Management the Opal feature
-# for Opal supported devices.
-#
-#
-# Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-##
-[Defines]
- INF_VERSION = 0x00010007
- BASE_NAME = OpalPasswordDxe
- FILE_GUID = E3E4048D-6C0C-43E4-AE1C-FFB579D8EF41
- MODULE_TYPE = DXE_DRIVER
- VERSION_STRING = 1.0
- ENTRY_POINT = EfiDriverEntryPoint
- UNLOAD_IMAGE = OpalEfiDriverUnload
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
-#
-
-[Sources]
- OpalDriver.h
- OpalHii.c
- OpalHiiCallbacks.c
- OpalDriver.c
- OpalDriverPrivate.h
- OpalHii.h
- OpalHiiPrivate.h
- OpalHiiFormValues.h
- OpalPasswordForm.vfr
- OpalHiiFormStrings.uni
- ComponentName.c
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
- SecurityPkg/SecurityPkg.dec
-
-[LibraryClasses]
- BaseLib
- MemoryAllocationLib
- UefiBootServicesTableLib
- UefiDriverEntryPoint
- UefiHiiServicesLib
- UefiRuntimeServicesTableLib
- BaseMemoryLib
- DebugLib
- HiiLib
- PrintLib
- DevicePathLib
- OpalPasswordSupportLib
- UefiLib
- TcgStorageOpalLib
- Tcg2PhysicalPresenceLib
-
-[Protocols]
- gEfiHiiConfigAccessProtocolGuid ## PRODUCES
- gEfiStorageSecurityCommandProtocolGuid ## CONSUMES
- gEfiComponentNameProtocolGuid ## PRODUCES
- gEfiComponentName2ProtocolGuid ## PRODUCES
- gEfiBlockIoProtocolGuid ## CONSUMES
- gEfiSmmCommunicationProtocolGuid ## PRODUCES
- gEfiPciIoProtocolGuid ## CONSUMES
- gEfiDevicePathToTextProtocolGuid ## CONSUMES
-
-[Guids]
- gEfiEventExitBootServicesGuid ## CONSUMES ## Event
- gOpalExtraInfoVariableGuid ## PRODUCES ## GUID
-
-[Depex]
- gEfiSmmCommunicationProtocolGuid AND gEfiHiiStringProtocolGuid AND gEfiHiiDatabaseProtocolGuid
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordForm.vfr b/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordForm.vfr
deleted file mode 100644
index 218e0f442ce6..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordForm.vfr
+++ /dev/null
@@ -1,350 +0,0 @@
-/** @file
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-#include "OpalHiiFormValues.h"
-
-
-#define EFI_HII_PLATFORM_SETUP_FORMSET_GUID \
- { 0x93039971, 0x8545, 0x4b04, { 0xb4, 0x5e, 0x32, 0xeb, 0x83, 0x26, 0x4, 0xe } }
-
-formset
- guid = SETUP_FORMSET_GUID,
- title = STRING_TOKEN(STR_OPAL),
- help = STRING_TOKEN(STR_FORM_SET_HELP),
- classguid = EFI_HII_PLATFORM_SETUP_FORMSET_GUID,
-
- // Define a Buffer Storage (EFI_IFR_VARSTORE) that will be filled
- // out initially through extractConfig call
- varstore OPAL_HII_CONFIGURATION, // This is the Data structure type
- name = OpalHiiConfig, // Define referenced name in vfr
- guid = SETUP_VARIABLE_GUID; // GUID of this Buffer storage
-
-form formid = FORMID_VALUE_MAIN_MENU,
- title = STRING_TOKEN(STR_OPAL);
-
- //CONFIG_VARIABLE(HII_KEY(HII_KEY_ID_VAR_SUPPORTED_DISKS), SupportedDisks, 0x0, 0xFFFF);
- suppressif TRUE;
- numeric
- name = SupportedDisks,
- varid = OpalHiiConfig.SupportedDisks,
- prompt = STRING_TOKEN(STR_NULL),
- help = STRING_TOKEN(STR_NULL),
- flags = INTERACTIVE,
- key = 0x800E, //32782,
- minimum = 0x0,
- maximum = 0xFFFF,
- endnumeric;
- endif;
-
- subtitle text = STRING_TOKEN(STR_MAIN_OPAL_VERSION);
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- text
- help = STRING_TOKEN(STR_NULL),
- text = STRING_TOKEN(STR_MAIN_PHY_DISKS_LBL);
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- //DISK( 0 );
- suppressif ( questionref(SupportedDisks) & ( 0x1 ) ) == 0;
- goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
- prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_0 ),
- help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
- flags = INTERACTIVE, \
- key = 0x8001; //32769
- endif;
-
- //DISK( 1 );
- suppressif ( questionref(SupportedDisks) & ( 0x2 ) ) == 0;
- goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
- prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_1 ),
- help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
- flags = INTERACTIVE, \
- key = 0x8101; //33025
- endif;
-
- //DISK( 2 );
- suppressif ( questionref(SupportedDisks) & ( 0x4 ) ) == 0;
- goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
- prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_2 ),
- help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
- flags = INTERACTIVE, \
- key = 0x8201; //33281
- endif;
-
- //DISK( 3 );
- suppressif ( questionref(SupportedDisks) & ( 0x8 ) ) == 0;
- goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
- prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_3 ),
- help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
- flags = INTERACTIVE, \
- key = 0x8301; // 33537
- endif;
-
- //DISK( 4 );
- suppressif ( questionref(SupportedDisks) & ( 0x10 ) ) == 0;
- goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
- prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_4 ),
- help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
- flags = INTERACTIVE, \
- key = 0x8401; // 33793
- endif;
-
- //DISK( 5 );
- suppressif ( questionref(SupportedDisks) & ( 0x20 ) ) == 0;
- goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
- prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_5 ),
- help = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
- flags = INTERACTIVE, \
- key = 0x8501; // 34049
- endif;
-
- //No disks on system
- suppressif ideqval OpalHiiConfig.NumDisks > 0;
- text
- help = STRING_TOKEN(STR_NULL),
- text = STRING_TOKEN(STR_MAIN_NO_DISKS_PRESENT_LBL);
- endif;
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- grayoutif TRUE;
- text
- help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
- text = STRING_TOKEN(STR_BLOCKSID_STATUS);
- text
- help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
- text = STRING_TOKEN(STR_BLOCKSID_STATUS1);
- text
- help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
- text = STRING_TOKEN(STR_BLOCKSID_STATUS2);
- text
- help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
- text = STRING_TOKEN(STR_BLOCKSID_STATUS3);
- subtitle text = STRING_TOKEN(STR_NULL);
- endif;
-
- oneof varid = OpalHiiConfig.EnableBlockSid,
- questionid = 0x8017, // 32791,
- prompt = STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_ENABLE_BLOCKSID_HELP),
- flags = INTERACTIVE,
- option text = STRING_TOKEN(STR_NONE), value = 0, flags = DEFAULT | MANUFACTURING | RESET_REQUIRED;
- option text = STRING_TOKEN(STR_ENABLED), value = 1, flags = RESET_REQUIRED;
- option text = STRING_TOKEN(STR_DISABLED), value = 2, flags = RESET_REQUIRED;
- option text = STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_TRUE), value = 3, flags = RESET_REQUIRED;
- option text = STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_FALSE), value = 4, flags = RESET_REQUIRED;
- option text = STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_TRUE), value = 5, flags = RESET_REQUIRED;
- option text = STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_FALSE), value = 6, flags = RESET_REQUIRED;
- endoneof;
-
-
-
-endform; // MAIN MENU FORM
-
-//
-///////////////// DISK INFO FORM /////////////////
-//
-form formid = FORMID_VALUE_DISK_INFO_FORM_MAIN,
- title = STRING_TOKEN(STR_OPAL);
-
- suppressif TRUE;
- numeric
- name = SelectedDiskAvailableActions,
- varid = OpalHiiConfig.SelectedDiskAvailableActions,
- prompt = STRING_TOKEN(STR_NULL),
- help = STRING_TOKEN(STR_NULL),
- flags = INTERACTIVE,
- key = 0x800F, // 32783
- minimum = 0x0,
- maximum = 0xFFFF,
- endnumeric;
- endif;
-
- subtitle text = STRING_TOKEN(STR_MAIN_OPAL_VERSION);
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- text
- help = STRING_TOKEN(STR_NULL),
- text = STRING_TOKEN(STR_DISK_INFO_SELECTED_DISK_NAME);
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_LOCK ) == 0;
- goto FORMID_VALUE_DISK_ACTION_FORM,
- prompt = STRING_TOKEN(STR_DISK_INFO_LOCK),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_LOCK_HELP),
- flags = INTERACTIVE,
- key = 0x8002; // 32770
- endif;
-
- suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_UNLOCK ) == 0;
- goto FORMID_VALUE_DISK_ACTION_FORM,
- prompt = STRING_TOKEN(STR_DISK_INFO_UNLOCK),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_UNLOCK_HELP),
- flags = INTERACTIVE,
- key = 0x8003; //32771;
- endif;
-
- suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_SET_ADMIN_PWD ) == 0;
- goto FORMID_VALUE_DISK_ACTION_FORM,
- prompt = STRING_TOKEN(STR_DISK_INFO_SET_ADMIN_PSWD),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_SET_ADMIN_PSWD_HELP),
- flags = INTERACTIVE,
- key = 0x8004; //32772;
- endif;
-
- suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_SET_USER_PWD ) == 0;
- goto FORMID_VALUE_DISK_ACTION_FORM,
- prompt = STRING_TOKEN(STR_DISK_INFO_SET_USER_PSWD),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_SET_USER_PSWD_HELP),
- flags = INTERACTIVE,
- key = 0x8005; //32773;
- endif;
-
- suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_SECURE_ERASE ) == 0;
- goto FORMID_VALUE_DISK_ACTION_FORM,
- prompt = STRING_TOKEN(STR_DISK_INFO_SECURE_ERASE),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_SECURE_ERASE_HELP),
- flags = INTERACTIVE,
- key = 0x8006; //32774;
- endif;
-
- suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_REVERT ) == 0;
- goto FORMID_VALUE_DISK_ACTION_FORM,
- prompt = STRING_TOKEN(STR_DISK_INFO_REVERT),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_PSID_REVERT_HELP),
- flags = INTERACTIVE,
- key = 0x8008; //32776;
- endif;
-
- suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_PSID_REVERT ) == 0;
- goto FORMID_VALUE_DISK_ACTION_FORM,
- prompt = STRING_TOKEN(STR_DISK_INFO_PSID_REVERT),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_PSID_REVERT_HELP),
- flags = INTERACTIVE,
- key = 0x8007; //32775;
- endif;
-
- suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_DISABLE_USER ) == 0;
- goto FORMID_VALUE_DISK_ACTION_FORM,
- prompt = STRING_TOKEN(STR_DISK_INFO_DISABLE_USER),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_DISABLE_USER_HELP),
- flags = INTERACTIVE,
- key = 0x8009; //32777;
- endif;
-
- suppressif ( questionref(SelectedDiskAvailableActions) & HII_ACTION_ENABLE_FEATURE ) == 0;
- goto FORMID_VALUE_DISK_ACTION_FORM,
- prompt = STRING_TOKEN(STR_DISK_INFO_ENABLE_FEATURE),
- help = STRING_TOKEN(STR_DISK_INFO_GOTO_ENABLE_FEATURE_HELP),
- flags = INTERACTIVE,
- key = 0x800A; //32778;
- endif;
-
-endform; // DISK INFO FORM
-
-//
-///////////////// DISK ACTION FORM /////////////////
-//
-form formid = FORMID_VALUE_DISK_ACTION_FORM,
- title = STRING_TOKEN(STR_OPAL);
-
- suppressif TRUE;
- numeric
- name = AvailableFields,
- varid = OpalHiiConfig.AvailableFields,
- prompt = STRING_TOKEN(STR_NULL),
- help = STRING_TOKEN(STR_NULL),
- flags = INTERACTIVE,
- key = 0x8012, //32786,
- minimum = 0x0,
- maximum = 0xFFFF,
- endnumeric;
- endif;
-
- subtitle text = STRING_TOKEN(STR_MAIN_OPAL_VERSION);
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- text
- help = STRING_TOKEN(STR_NULL),
- text = STRING_TOKEN(STR_DISK_INFO_SELECTED_DISK_NAME);
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- text
- help = STRING_TOKEN(STR_NULL),
- text = STRING_TOKEN(STR_DISK_ACTION_LBL);
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- suppressif (questionref(AvailableFields) & HII_FIELD_KEEP_USER_DATA) == 0;
- grayoutif (questionref(AvailableFields) & HII_FIELD_KEEP_USER_DATA_FORCED) != 0;
- checkbox
- name = MyCheckbox,
- varid = OpalHiiConfig.KeepUserData,
- prompt = STRING_TOKEN(STR_KEEP_USER_DATA_PROMPT),
- help = STRING_TOKEN(STR_KEEP_USER_DATA_HELP),
- key = 0x8011, //32785,
- endcheckbox;
-
- //EMPTY_LINE;
- text
- help = STRING_TOKEN(STR_NULL),
- text = STRING_TOKEN(STR_NULL);
- endif;
- endif;
-
- suppressif (questionref(AvailableFields) & HII_FIELD_PASSWORD) == 0;
- password
- varid = OpalHiiConfig.Password,
- prompt = STRING_TOKEN(STR_PASSWORD_PROMPT),
- help = STRING_TOKEN(STR_PASSWORD_HELP),
- flags = INTERACTIVE,
- key = 0x800C, //32780,
- minsize = 6,
- maxsize = 20,
- endpassword;
- endif;
-
- suppressif (questionref(AvailableFields) & HII_FIELD_PSID) == 0;
- string
- varid = OpalHiiConfig.Psid,
- prompt = STRING_TOKEN(STR_REVERT_PROMPT),
- help = STRING_TOKEN(STR_REVERT_HELP),
- flags = INTERACTIVE,
- key = 0x800D, //32781,
- minsize = PSID_CHARACTER_LENGTH,
- maxsize = PSID_CHARACTER_LENGTH,
- endstring;
- endif;
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- text
- help = STRING_TOKEN(STR_NULL),
- text = STRING_TOKEN(STR_ACTION_STATUS);
-
- subtitle text = STRING_TOKEN(STR_NULL);
-
- goto FORMID_VALUE_MAIN_MENU,
- prompt = STRING_TOKEN(STR_GOTO_HOME),
- help = STRING_TOKEN(STR_GOTO_HOME_HELP),
- flags = INTERACTIVE,
- key = 0x8000; //32768;
-
-endform; // DISK ACTION FORM
-
-endformset;
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalAhciMode.c b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalAhciMode.c
deleted file mode 100644
index e38acfd052b5..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalAhciMode.c
+++ /dev/null
@@ -1,1267 +0,0 @@
-/** @file
- This driver is used for Opal Password Feature support at AHCI mode.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#include "OpalPasswordSmm.h"
-
-/**
- Start command for give slot on specific port.
-
- @param Port The number of port.
- @param CommandSlot The number of CommandSlot.
- @param Timeout The timeout Value of start.
-
- @retval EFI_DEVICE_ERROR The command start unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command start successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStartCommand (
- IN UINT8 Port,
- IN UINT8 CommandSlot,
- IN UINT64 Timeout
- );
-
-/**
- Stop command running for giving port
-
- @param Port The number of port.
- @param Timeout The timeout Value of stop.
-
- @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command stop successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStopCommand (
- IN UINT8 Port,
- IN UINT64 Timeout
- );
-
-/**
- Read AHCI Operation register.
-
- @param Offset The operation register offset.
-
- @return The register content read.
-
-**/
-UINT32
-EFIAPI
-AhciReadReg (
- IN UINT32 Offset
- )
-{
- UINT32 Data;
-
- Data = 0;
-
- Data = MmioRead32 (mAhciBar + Offset);
-
- return Data;
-}
-
-/**
- Write AHCI Operation register.
-
- @param Offset The operation register offset.
- @param Data The Data used to write down.
-
-**/
-VOID
-EFIAPI
-AhciWriteReg (
- IN UINT32 Offset,
- IN UINT32 Data
- )
-{
- MmioWrite32 (mAhciBar + Offset, Data);
-
- return ;
-}
-
-/**
- Do AND operation with the Value of AHCI Operation register.
-
- @param Offset The operation register offset.
- @param AndData The Data used to do AND operation.
-
-**/
-VOID
-EFIAPI
-AhciAndReg (
- IN UINT32 Offset,
- IN UINT32 AndData
- )
-{
- UINT32 Data;
-
- Data = AhciReadReg (Offset);
-
- Data &= AndData;
-
- AhciWriteReg (Offset, Data);
-}
-
-/**
- Do OR operation with the Value of AHCI Operation register.
-
- @param Offset The operation register offset.
- @param OrData The Data used to do OR operation.
-
-**/
-VOID
-EFIAPI
-AhciOrReg (
- IN UINT32 Offset,
- IN UINT32 OrData
- )
-{
- UINT32 Data;
-
- Data = AhciReadReg (Offset);
-
- Data |= OrData;
-
- AhciWriteReg (Offset, Data);
-}
-
-/**
- Wait for memory set to the test Value.
-
- @param Offset The memory address to test.
- @param MaskValue The mask Value of memory.
- @param TestValue The test Value of memory.
- @param Timeout The time out Value for wait memory set.
-
- @retval EFI_DEVICE_ERROR The memory is not set.
- @retval EFI_TIMEOUT The memory setting is time out.
- @retval EFI_SUCCESS The memory is correct set.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciWaitMmioSet (
- IN UINT32 Offset,
- IN UINT32 MaskValue,
- IN UINT32 TestValue,
- IN UINT64 Timeout
- )
-{
- UINT32 Value;
- UINT32 Delay;
-
- Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
-
- do {
- Value = AhciReadReg (Offset) & MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
-
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-}
-/**
- Wait for the Value of the specified system memory set to the test Value.
-
- @param Address The system memory address to test.
- @param MaskValue The mask Value of memory.
- @param TestValue The test Value of memory.
- @param Timeout The time out Value for wait memory set, uses 100ns as a unit.
-
- @retval EFI_TIMEOUT The system memory setting is time out.
- @retval EFI_SUCCESS The system memory is correct set.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciWaitMemSet (
- IN EFI_PHYSICAL_ADDRESS Address,
- IN UINT32 MaskValue,
- IN UINT32 TestValue,
- IN UINT64 Timeout
- )
-{
- UINT32 Value;
- UINT32 Delay;
-
- Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
-
- do {
- //
- // Access sytem memory to see if the Value is the tested one.
- //
- // The system memory pointed by Address will be updated by the
- // SATA Host Controller, "volatile" is introduced to prevent
- // compiler from optimizing the access to the memory address
- // to only read once.
- //
- Value = *(volatile UINT32 *) (UINTN) Address;
- Value &= MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
-
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-}
-
-/**
- Check the memory status to the test Value.
-
- @param[in] Address The memory address to test.
- @param[in] MaskValue The mask Value of memory.
- @param[in] TestValue The test Value of memory.
- @param[in, out] RetryTimes The retry times Value for waitting memory set. If 0, then just try once.
-
- @retval EFI_NOTREADY The memory is not set.
- @retval EFI_TIMEOUT The memory setting retry times out.
- @retval EFI_SUCCESS The memory is correct set.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciCheckMemSet (
- IN UINTN Address,
- IN UINT32 MaskValue,
- IN UINT32 TestValue,
- IN OUT UINTN *RetryTimes OPTIONAL
- )
-{
- UINT32 Value;
-
- if (RetryTimes != NULL) {
- (*RetryTimes)--;
- }
-
- Value = *(volatile UINT32 *) Address;
- Value &= MaskValue;
-
- if (Value == TestValue) {
- return EFI_SUCCESS;
- }
-
- if ((RetryTimes != NULL) && (*RetryTimes == 0)) {
- return EFI_TIMEOUT;
- } else {
- return EFI_NOT_READY;
- }
-}
-
-/**
- Clear the port interrupt and error status. It will also clear
- HBA interrupt status.
-
- @param Port The number of port.
-
-**/
-VOID
-EFIAPI
-AhciClearPortStatus (
- IN UINT8 Port
- )
-{
- UINT32 Offset;
-
- //
- // Clear any error status
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
- AhciWriteReg (Offset, AhciReadReg (Offset));
-
- //
- // Clear any port interrupt status
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IS;
- AhciWriteReg (Offset, AhciReadReg (Offset));
-
- //
- // Clear any HBA interrupt status
- //
- AhciWriteReg (EFI_AHCI_IS_OFFSET, AhciReadReg (EFI_AHCI_IS_OFFSET));
-}
-
-/**
- Enable the FIS running for giving port.
-
- @param Port The number of port.
- @param Timeout The timeout Value of enabling FIS.
-
- @retval EFI_DEVICE_ERROR The FIS enable setting fails.
- @retval EFI_TIMEOUT The FIS enable setting is time out.
- @retval EFI_SUCCESS The FIS enable successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciEnableFisReceive (
- IN UINT8 Port,
- IN UINT64 Timeout
- )
-{
- UINT32 Offset;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (Offset, EFI_AHCI_PORT_CMD_FRE);
-
- return AhciWaitMmioSet (
- Offset,
- EFI_AHCI_PORT_CMD_FR,
- EFI_AHCI_PORT_CMD_FR,
- Timeout
- );
-}
-
-/**
- Disable the FIS running for giving port.
-
- @param Port The number of port.
- @param Timeout The timeout Value of disabling FIS.
-
- @retval EFI_DEVICE_ERROR The FIS disable setting fails.
- @retval EFI_TIMEOUT The FIS disable setting is time out.
- @retval EFI_UNSUPPORTED The port is in running state.
- @retval EFI_SUCCESS The FIS disable successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciDisableFisReceive (
- IN UINT8 Port,
- IN UINT64 Timeout
- )
-{
- UINT32 Offset;
- UINT32 Data;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- Data = AhciReadReg (Offset);
-
- //
- // Before disabling Fis receive, the DMA engine of the port should NOT be in running status.
- //
- if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) != 0) {
- return EFI_UNSUPPORTED;
- }
-
- //
- // Check if the Fis receive DMA engine for the port is running.
- //
- if ((Data & EFI_AHCI_PORT_CMD_FR) != EFI_AHCI_PORT_CMD_FR) {
- return EFI_SUCCESS;
- }
-
- AhciAndReg (Offset, (UINT32)~(EFI_AHCI_PORT_CMD_FRE));
-
- return AhciWaitMmioSet (
- Offset,
- EFI_AHCI_PORT_CMD_FR,
- 0,
- Timeout
- );
-}
-
-/**
- Build the command list, command table and prepare the fis receiver.
-
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The timeout Value of stop.
- @param CommandFis The control fis will be used for the transfer.
- @param CommandList The command list will be used for the transfer.
- @param AtapiCommand The atapi command will be used for the transfer.
- @param AtapiCommandLength The Length of the atapi command.
- @param CommandSlotNumber The command slot will be used for the transfer.
- @param DataPhysicalAddr The pointer to the Data Buffer pci bus master address.
- @param DataLength The Data count to be transferred.
-
-**/
-VOID
-EFIAPI
-AhciBuildCommand (
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_COMMAND_FIS *CommandFis,
- IN EFI_AHCI_COMMAND_LIST *CommandList,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN UINT8 CommandSlotNumber,
- IN OUT VOID *DataPhysicalAddr,
- IN UINT64 DataLength
- )
-{
- UINT64 BaseAddr;
- UINT64 PrdtNumber;
- UINTN RemainedData;
- UINTN MemAddr;
- DATA_64 Data64;
- UINT32 Offset;
-
- //
- // Filling the PRDT
- //
- PrdtNumber = DivU64x32 (DataLength + EFI_AHCI_MAX_DATA_PER_PRDT - 1, EFI_AHCI_MAX_DATA_PER_PRDT);
-
- //
- // According to AHCI 1.3 spec, a PRDT entry can point to a maximum 4MB Data block.
- // It also limits that the maximum amount of the PRDT entry in the command table
- // is 65535.
- //
- ASSERT (PrdtNumber <= 1);
-
- Data64.Uint64 = (UINTN) (AhciRegisters->AhciRFis);
-
- BaseAddr = Data64.Uint64;
-
- ZeroMem ((VOID *)((UINTN) BaseAddr), sizeof (EFI_AHCI_RECEIVED_FIS));
-
- ZeroMem (AhciRegisters->AhciCommandTable, sizeof (EFI_AHCI_COMMAND_TABLE));
-
- CommandFis->AhciCFisPmNum = PortMultiplier;
-
- CopyMem (&AhciRegisters->AhciCommandTable->CommandFis, CommandFis, sizeof (EFI_AHCI_COMMAND_FIS));
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- if (AtapiCommand != NULL) {
- CopyMem (
- &AhciRegisters->AhciCommandTable->AtapiCmd,
- AtapiCommand,
- AtapiCommandLength
- );
-
- CommandList->AhciCmdA = 1;
- CommandList->AhciCmdP = 1;
-
- AhciOrReg (Offset, (EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
- } else {
- AhciAndReg (Offset, (UINT32)~(EFI_AHCI_PORT_CMD_DLAE | EFI_AHCI_PORT_CMD_ATAPI));
- }
-
- RemainedData = (UINTN) DataLength;
- MemAddr = (UINTN) DataPhysicalAddr;
- CommandList->AhciCmdPrdtl = (UINT32)PrdtNumber;
-
- AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbc = (UINT32)RemainedData - 1;
-
- Data64.Uint64 = (UINT64)MemAddr;
- AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDba = Data64.Uint32.Lower32;
- AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbau = Data64.Uint32.Upper32;
-
- //
- // Set the last PRDT to Interrupt On Complete
- //
- AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtIoc = 1;
-
- CopyMem (
- (VOID *) ((UINTN) AhciRegisters->AhciCmdList + (UINTN) CommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST)),
- CommandList,
- sizeof (EFI_AHCI_COMMAND_LIST)
- );
-
- Data64.Uint64 = (UINT64)(UINTN) AhciRegisters->AhciCommandTable;
- AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtba = Data64.Uint32.Lower32;
- AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtbau = Data64.Uint32.Upper32;
- AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdPmp = PortMultiplier;
-
-}
-
-/**
- Buid a command FIS.
-
- @param CmdFis A pointer to the EFI_AHCI_COMMAND_FIS Data structure.
- @param AtaCommandBlock A pointer to the AhciBuildCommandFis Data structure.
-
-**/
-VOID
-EFIAPI
-AhciBuildCommandFis (
- IN OUT EFI_AHCI_COMMAND_FIS *CmdFis,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock
- )
-{
- ZeroMem (CmdFis, sizeof (EFI_AHCI_COMMAND_FIS));
-
- CmdFis->AhciCFisType = EFI_AHCI_FIS_REGISTER_H2D;
- //
- // Indicator it's a command
- //
- CmdFis->AhciCFisCmdInd = 0x1;
- CmdFis->AhciCFisCmd = AtaCommandBlock->AtaCommand;
-
- CmdFis->AhciCFisFeature = AtaCommandBlock->AtaFeatures;
- CmdFis->AhciCFisFeatureExp = AtaCommandBlock->AtaFeaturesExp;
-
- CmdFis->AhciCFisSecNum = AtaCommandBlock->AtaSectorNumber;
- CmdFis->AhciCFisSecNumExp = AtaCommandBlock->AtaSectorNumberExp;
-
- CmdFis->AhciCFisClyLow = AtaCommandBlock->AtaCylinderLow;
- CmdFis->AhciCFisClyLowExp = AtaCommandBlock->AtaCylinderLowExp;
-
- CmdFis->AhciCFisClyHigh = AtaCommandBlock->AtaCylinderHigh;
- CmdFis->AhciCFisClyHighExp = AtaCommandBlock->AtaCylinderHighExp;
-
- CmdFis->AhciCFisSecCount = AtaCommandBlock->AtaSectorCount;
- CmdFis->AhciCFisSecCountExp = AtaCommandBlock->AtaSectorCountExp;
-
- CmdFis->AhciCFisDevHead = (UINT8) (AtaCommandBlock->AtaDeviceHead | 0xE0);
-}
-
-/**
- Start a PIO Data transfer on specific port.
-
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The timeout Value of stop.
- @param AtapiCommand The atapi command will be used for the transfer.
- @param AtapiCommandLength The Length of the atapi command.
- @param Read The transfer direction.
- @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
- @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
- @param MemoryAddr The pointer to the Data Buffer.
- @param DataCount The Data count to be transferred.
- @param Timeout The timeout Value of non Data transfer.
-
- @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The PIO Data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciPioTransfer (
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN OUT VOID *MemoryAddr,
- IN UINT32 DataCount,
- IN UINT64 Timeout
- )
-{
- EFI_STATUS Status;
- UINT32 FisBaseAddr;
- UINT32 Offset;
- UINT32 Delay;
- EFI_AHCI_COMMAND_FIS CFis;
- EFI_AHCI_COMMAND_LIST CmdList;
- UINT32 PortTfd;
- UINT32 PrdCount;
- UINT32 OldRfisLo;
- UINT32 OldRfisHi;
- UINT32 OldCmdListLo;
- UINT32 OldCmdListHi;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
- OldRfisLo = AhciReadReg (Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
- OldRfisHi = AhciReadReg (Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
- AhciWriteReg (Offset, (UINT32)(UINTN)AhciRegisters->AhciRFis);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
- AhciWriteReg (Offset, 0);
-
- //
- // Single task envrionment, we only use one command table for all port
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
- OldCmdListLo = AhciReadReg (Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
- OldCmdListHi = AhciReadReg (Offset);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
- AhciWriteReg (Offset, (UINT32)(UINTN)AhciRegisters->AhciCmdList);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
- AhciWriteReg (Offset, 0);
-
- //
- // Package read needed
- //
- AhciBuildCommandFis (&CFis, AtaCommandBlock);
-
- ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
-
- CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
- CmdList.AhciCmdW = Read ? 0 : 1;
-
- AhciBuildCommand (
- AhciRegisters,
- Port,
- PortMultiplier,
- &CFis,
- &CmdList,
- AtapiCommand,
- AtapiCommandLength,
- 0,
- (VOID *)(UINTN)MemoryAddr,
- DataCount
- );
-
- Status = AhciStartCommand (
- Port,
- 0,
- Timeout
- );
- if (EFI_ERROR (Status)) {
- goto Exit;
- }
-
- //
- // Checking the status and wait the driver sending Data
- //
- FisBaseAddr = (UINT32)(UINTN)AhciRegisters->AhciRFis;
- if (Read && (AtapiCommand == 0)) {
- //
- // Wait device sends the PIO setup fis before Data transfer
- //
- Status = EFI_TIMEOUT;
- Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
- do {
- Offset = FisBaseAddr + EFI_AHCI_PIO_FIS_OFFSET;
-
- Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_PIO_SETUP, 0);
- if (!EFI_ERROR (Status)) {
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- PortTfd = AhciReadReg ((UINT32) Offset);
- //
- // PxTFD will be updated if there is a D2H or SetupFIS received.
- // For PIO IN transfer, D2H means a device error. Therefore we only need to check the TFD after receiving a SetupFIS.
- //
- if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
- Status = EFI_DEVICE_ERROR;
- break;
- }
-
- PrdCount = *(volatile UINT32 *) (&(AhciRegisters->AhciCmdList[0].AhciCmdPrdbc));
- if (PrdCount == DataCount) {
- break;
- }
- }
-
- Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
- Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK, EFI_AHCI_FIS_REGISTER_D2H, 0);
- if (!EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- break;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay(100);
-
- Delay--;
- } while (Delay > 0);
- } else {
- //
- // Wait for D2H Fis is received
- //
- Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
- Status = AhciWaitMemSet (
- Offset,
- EFI_AHCI_FIS_TYPE_MASK,
- EFI_AHCI_FIS_REGISTER_D2H,
- Timeout
- );
-
- if (EFI_ERROR (Status)) {
- goto Exit;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- PortTfd = AhciReadReg ((UINT32) Offset);
- if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
- Status = EFI_DEVICE_ERROR;
- }
- }
-
-Exit:
- AhciStopCommand (
- Port,
- Timeout
- );
-
- AhciDisableFisReceive (
- Port,
- Timeout
- );
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
- AhciWriteReg (Offset, OldRfisLo);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FBU;
- AhciWriteReg (Offset, OldRfisHi);
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
- AhciWriteReg (Offset, OldCmdListLo);
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLBU;
- AhciWriteReg (Offset, OldCmdListHi);
-
- return Status;
-}
-
-/**
- Stop command running for giving port
-
- @param Port The number of port.
- @param Timeout The timeout Value of stop.
-
- @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command stop successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStopCommand (
- IN UINT8 Port,
- IN UINT64 Timeout
- )
-{
- UINT32 Offset;
- UINT32 Data;
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- Data = AhciReadReg (Offset);
-
- if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) == 0) {
- return EFI_SUCCESS;
- }
-
- if ((Data & EFI_AHCI_PORT_CMD_ST) != 0) {
- AhciAndReg (Offset, (UINT32)~(EFI_AHCI_PORT_CMD_ST));
- }
-
- return AhciWaitMmioSet (
- Offset,
- EFI_AHCI_PORT_CMD_CR,
- 0,
- Timeout
- );
-}
-
-/**
- Start command for give slot on specific port.
-
- @param Port The number of port.
- @param CommandSlot The number of CommandSlot.
- @param Timeout The timeout Value of start.
-
- @retval EFI_DEVICE_ERROR The command start unsuccessfully.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_SUCCESS The command start successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciStartCommand (
- IN UINT8 Port,
- IN UINT8 CommandSlot,
- IN UINT64 Timeout
- )
-{
- UINT32 CmdSlotBit;
- EFI_STATUS Status;
- UINT32 PortStatus;
- UINT32 StartCmd;
- UINT32 PortTfd;
- UINT32 Offset;
- UINT32 Capability;
-
- //
- // Collect AHCI controller information
- //
- Capability = AhciReadReg(EFI_AHCI_CAPABILITY_OFFSET);
-
- CmdSlotBit = (UINT32) (1 << CommandSlot);
-
- AhciClearPortStatus (
- Port
- );
-
- Status = AhciEnableFisReceive (
- Port,
- Timeout
- );
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- PortStatus = AhciReadReg (Offset);
-
- StartCmd = 0;
- if ((PortStatus & EFI_AHCI_PORT_CMD_ALPE) != 0) {
- StartCmd = AhciReadReg (Offset);
- StartCmd &= ~EFI_AHCI_PORT_CMD_ICC_MASK;
- StartCmd |= EFI_AHCI_PORT_CMD_ACTIVE;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
- PortTfd = AhciReadReg (Offset);
-
- if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0) {
- if ((Capability & BIT24) != 0) {
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (Offset, EFI_AHCI_PORT_CMD_COL);
-
- AhciWaitMmioSet (
- Offset,
- EFI_AHCI_PORT_CMD_COL,
- 0,
- Timeout
- );
- }
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- AhciOrReg (Offset, EFI_AHCI_PORT_CMD_ST | StartCmd);
-
- //
- // Setting the command
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SACT;
- AhciAndReg (Offset, 0);
- AhciOrReg (Offset, CmdSlotBit);
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CI;
- AhciAndReg (Offset, 0);
- AhciOrReg (Offset, CmdSlotBit);
- return EFI_SUCCESS;
-}
-
-
-/**
- Do AHCI HBA reset.
-
- @param[in] Timeout The timeout Value of reset.
-
- @retval EFI_DEVICE_ERROR AHCI controller is failed to complete hardware reset.
- @retval EFI_TIMEOUT The reset operation is time out.
- @retval EFI_SUCCESS AHCI controller is reset successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciReset (
- IN UINT64 Timeout
- )
-{
- UINT32 Delay;
- UINT32 Value;
- UINT32 Capability;
-
- //
- // Collect AHCI controller information
- //
- Capability = AhciReadReg (EFI_AHCI_CAPABILITY_OFFSET);
-
- //
- // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only is not set
- //
- if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
- AhciOrReg (EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
- }
-
- AhciOrReg (EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_RESET);
-
- Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
-
- do {
- Value = AhciReadReg(EFI_AHCI_GHC_OFFSET);
- if ((Value & EFI_AHCI_GHC_RESET) == 0) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay(100);
-
- Delay--;
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-
-
-}
-
-/**
- Send Buffer cmd to specific device.
-
- @param[in] AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param[in] Port The port number of attached ATA device.
- @param[in] PortMultiplier The port number of port multiplier of attached ATA device.
- @param[in, out] Buffer The Data Buffer to store IDENTIFY PACKET Data.
-
- @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for executing.
- @retval EFI_SUCCESS The cmd executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciIdentify (
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN OUT ATA_IDENTIFY_DATA *Buffer
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
-
- if (AhciRegisters == NULL || Buffer == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE;
- AtaCommandBlock.AtaSectorCount = 1;
-
- Status = AhciPioTransfer (
- AhciRegisters,
- Port,
- PortMultiplier,
- NULL,
- 0,
- TRUE,
- &AtaCommandBlock,
- NULL,
- Buffer,
- sizeof (ATA_IDENTIFY_DATA),
- ATA_TIMEOUT
- );
-
- return Status;
-}
-
-/**
- Get AHCI mode MMIO Bar Size.
-
- @param[in] Bus The bus number of ata host controller.
- @param[in] Device The device number of ata host controller.
- @param[in] Function The function number of ata host controller.
-
- @retval The Size of AHCI MMIO BAR.
-
-**/
-UINT32
-EFIAPI
-GetAhciBarSize (
- IN UINTN Bus,
- IN UINTN Device,
- IN UINTN Function
- )
-{
- UINT32 Size;
- UINT32 OldBar;
-
- OldBar = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24));
- //
- // Disable PCI CMD.MSE bit before calculating MMIO Bar Size as it needs write all 1 to BAR register.
- //
- PciAnd32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x04), (UINT32)~BIT1);
-
- //
- // Get AHCI MMIO Bar Size.
- //
- PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24), 0xFFFFFFFF);
- Size = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24));
- Size = (~(Size & 0xFFFFFFF0)) + 1;
-
- //
- // Restore old MMIO Bar.
- //
- PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24), OldBar);
- //
- // Enable PCI CMD.MSE bit after restoring MMIO Bar.
- //
- PciOr32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x04), BIT1);
-
- return Size;
-}
-
-/**
- Get AHCI mode base address registers' Value.
-
- @param[in] Bus The bus number of ata host controller.
- @param[in] Device The device number of ata host controller.
- @param[in] Function The function number of ata host controller.
-
- @retval EFI_UNSUPPORTED Return this Value when the BARs is not IO type
- @retval EFI_SUCCESS Get the Base address successfully
- @retval Other Read the pci configureation Data error
-
-**/
-EFI_STATUS
-EFIAPI
-GetAhciBaseAddress (
- IN UINTN Bus,
- IN UINTN Device,
- IN UINTN Function
- )
-{
- UINT32 Size;
-
- //
- // Get AHCI MMIO Bar
- //
- mAhciBar = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24));
- //
- // Get AHCI MMIO Bar Size
- //
- Size = GetAhciBarSize (Bus, Device, Function);
- //
- // Check if the AHCI Bar region is in SMRAM to avoid malicious attack by modifying MMIO Bar to point to SMRAM.
- //
- if (!SmmIsMmioValid ((EFI_PHYSICAL_ADDRESS)mAhciBar, Size, NULL)) {
- return EFI_UNSUPPORTED;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Allocate transfer-related Data struct which is used at AHCI mode.
-
- @retval EFI_OUT_OF_RESOURCE The allocation is failure.
- @retval EFI_SUCCESS Successful to allocate memory.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciAllocateResource (
- VOID
- )
-{
- EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS Base;
-
- //
- // Allocate resources required by AHCI host controller.
- //
- Base = 0xFFFFFFFF;
- Status = gBS->AllocatePages (
- AllocateMaxAddress,
- EfiACPIMemoryNVS,
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
- &Base
- );
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- ZeroMem ((VOID *)(UINTN)Base, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)));
- mAhciRegisters.AhciRFis = (VOID *)(UINTN)Base;
-
- Base = 0xFFFFFFFF;
- Status = gBS->AllocatePages (
- AllocateMaxAddress,
- EfiACPIMemoryNVS,
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
- &Base
- );
- if (EFI_ERROR (Status)) {
- gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN)mAhciRegisters.AhciRFis, EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)));
- return EFI_OUT_OF_RESOURCES;
- }
- ZeroMem ((VOID *)(UINTN)Base, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)));
- mAhciRegisters.AhciCmdList = (VOID *)(UINTN)Base;
-
- Base = 0xFFFFFFFF;
- Status = gBS->AllocatePages (
- AllocateMaxAddress,
- EfiACPIMemoryNVS,
- EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)),
- &Base
- );
- if (EFI_ERROR (Status)) {
- gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN)mAhciRegisters.AhciRFis, EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)));
- gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN)mAhciRegisters.AhciCmdList, EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)));
- return EFI_OUT_OF_RESOURCES;
- }
- ZeroMem ((VOID *)(UINTN)Base, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)));
- mAhciRegisters.AhciCommandTable = (VOID *)(UINTN)Base;
- return EFI_SUCCESS;
-}
-
-/**
- Free allocated transfer-related Data struct which is used at AHCI mode.
-
-**/
-VOID
-EFIAPI
-AhciFreeResource (
- VOID
- )
-{
- if (mAhciRegisters.AhciRFis != NULL) {
- gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN)mAhciRegisters.AhciRFis, EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)));
- }
-
- if (mAhciRegisters.AhciCmdList != NULL) {
- gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN)mAhciRegisters.AhciCmdList, EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)));
- }
-
- if (mAhciRegisters.AhciCommandTable != NULL) {
- gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN)mAhciRegisters.AhciCommandTable, EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)));
- }
-}
-
-/**
- Initialize ATA host controller at AHCI mode.
-
- The function is designed to initialize ATA host controller.
-
- @param[in] Port The port number to do initialization.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciModeInitialize (
- UINT8 Port
- )
-{
- EFI_STATUS Status;
- UINT32 Capability;
- UINT32 Offset;
- UINT32 Data;
- UINT32 PhyDetectDelay;
-
- Status = AhciReset (ATA_TIMEOUT);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // Collect AHCI controller information
- //
- Capability = AhciReadReg (EFI_AHCI_CAPABILITY_OFFSET);
-
- //
- // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only is not set
- //
- if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
- AhciOrReg (EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_FB;
- AhciWriteReg (Offset, (UINT32)(UINTN)mAhciRegisters.AhciRFis);
-
- //
- // Single task envrionment, we only use one command table for all port
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CLB;
- AhciWriteReg (Offset, (UINT32)(UINTN)mAhciRegisters.AhciCmdList);
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_CMD;
- Data = AhciReadReg (Offset);
- if ((Data & EFI_AHCI_PORT_CMD_CPD) != 0) {
- AhciOrReg (Offset, EFI_AHCI_PORT_CMD_POD);
- }
-
- if ((Capability & BIT27) != 0) {
- AhciOrReg (Offset, EFI_AHCI_PORT_CMD_SUD);
- }
-
- //
- // Disable aggressive power management.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SCTL;
- AhciOrReg (Offset, EFI_AHCI_PORT_SCTL_IPM_INIT);
- //
- // Disable the reporting of the corresponding interrupt to system software.
- //
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_IE;
- AhciAndReg (Offset, 0);
-
- Status = AhciEnableFisReceive (
- Port,
- EFI_TIMER_PERIOD_MILLISECONDS(500)
- );
- ASSERT_EFI_ERROR (Status);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- //
- // According to SATA1.0a spec section 5.2, we need to wait for PxTFD.BSY and PxTFD.DRQ
- // and PxTFD.ERR to be zero. The maximum wait time is 16s which is defined at ATA spec.
- //
- PhyDetectDelay = 16 * 1000;
- do {
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SERR;
- if (AhciReadReg(Offset) != 0) {
- AhciWriteReg (Offset, AhciReadReg(Offset));
- }
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
-
- Data = AhciReadReg (Offset) & EFI_AHCI_PORT_TFD_MASK;
- if (Data == 0) {
- break;
- }
-
- MicroSecondDelay (1000);
- PhyDetectDelay--;
- } while (PhyDetectDelay > 0);
-
- if (PhyDetectDelay == 0) {
- return EFI_NOT_FOUND;
- }
-
- Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_SIG;
- Status = AhciWaitMmioSet (
- Offset,
- 0x0000FFFF,
- 0x00000101,
- EFI_TIMER_PERIOD_SECONDS(16)
- );
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- return Status;
-}
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalAhciMode.h b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalAhciMode.h
deleted file mode 100644
index 3a7f6331ca1f..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalAhciMode.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/** @file
- Header file for AHCI mode of ATA host controller.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#ifndef __OPAL_PASSWORD_AHCI_MODE_H__
-#define __OPAL_PASSWORD_AHCI_MODE_H__
-
-//
-// OPAL LIBRARY CALLBACKS
-//
-#define ATA_COMMAND_TRUSTED_RECEIVE 0x5C
-#define ATA_COMMAND_TRUSTED_SEND 0x5E
-
-//
-// ATA TRUSTED commands express transfer Length in 512 byte multiple
-//
-#define ATA_TRUSTED_TRANSFER_LENGTH_MULTIPLE 512
-#define ATA_DEVICE_LBA 0x40 ///< Set for commands with LBA (rather than CHS) addresses
-
-
-#define EFI_AHCI_BAR_INDEX 0x05
-
-#define EFI_AHCI_CAPABILITY_OFFSET 0x0000
-#define EFI_AHCI_CAP_SAM BIT18
-#define EFI_AHCI_GHC_OFFSET 0x0004
-#define EFI_AHCI_GHC_RESET BIT0
-#define EFI_AHCI_GHC_IE BIT1
-#define EFI_AHCI_GHC_ENABLE BIT31
-#define EFI_AHCI_IS_OFFSET 0x0008
-#define EFI_AHCI_PI_OFFSET 0x000C
-
-typedef struct {
- UINT32 Lower32;
- UINT32 Upper32;
-} DATA_32;
-
-typedef union {
- DATA_32 Uint32;
- UINT64 Uint64;
-} DATA_64;
-
-//
-// Each PRDT entry can point to a memory block up to 4M byte
-//
-#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000
-
-#define EFI_AHCI_FIS_REGISTER_H2D 0x27 //Register FIS - Host to Device
-#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
-#define EFI_AHCI_FIS_REGISTER_D2H 0x34 //Register FIS - Device to Host
-#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20
-#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 //DMA Activate FIS - Device to Host
-#define EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH 4
-#define EFI_AHCI_FIS_DMA_SETUP 0x41 //DMA Setup FIS - Bi-directional
-#define EFI_AHCI_FIS_DMA_SETUP_LENGTH 28
-#define EFI_AHCI_FIS_DATA 0x46 //Data FIS - Bi-directional
-#define EFI_AHCI_FIS_BIST 0x58 //BIST Activate FIS - Bi-directional
-#define EFI_AHCI_FIS_BIST_LENGTH 12
-#define EFI_AHCI_FIS_PIO_SETUP 0x5F //PIO Setup FIS - Device to Host
-#define EFI_AHCI_FIS_PIO_SETUP_LENGTH 20
-#define EFI_AHCI_FIS_SET_DEVICE 0xA1 //Set Device Bits FIS - Device to Host
-#define EFI_AHCI_FIS_SET_DEVICE_LENGTH 8
-
-#define EFI_AHCI_D2H_FIS_OFFSET 0x40
-#define EFI_AHCI_DMA_FIS_OFFSET 0x00
-#define EFI_AHCI_PIO_FIS_OFFSET 0x20
-#define EFI_AHCI_SDB_FIS_OFFSET 0x58
-#define EFI_AHCI_FIS_TYPE_MASK 0xFF
-#define EFI_AHCI_U_FIS_OFFSET 0x60
-
-//
-// Port register
-//
-#define EFI_AHCI_PORT_START 0x0100
-#define EFI_AHCI_PORT_REG_WIDTH 0x0080
-#define EFI_AHCI_PORT_CLB 0x0000
-#define EFI_AHCI_PORT_CLBU 0x0004
-#define EFI_AHCI_PORT_FB 0x0008
-#define EFI_AHCI_PORT_FBU 0x000C
-#define EFI_AHCI_PORT_IS 0x0010
-#define EFI_AHCI_PORT_IS_DHRS BIT0
-#define EFI_AHCI_PORT_IS_PSS BIT1
-#define EFI_AHCI_PORT_IS_SSS BIT2
-#define EFI_AHCI_PORT_IS_SDBS BIT3
-#define EFI_AHCI_PORT_IS_UFS BIT4
-#define EFI_AHCI_PORT_IS_DPS BIT5
-#define EFI_AHCI_PORT_IS_PCS BIT6
-#define EFI_AHCI_PORT_IS_DIS BIT7
-#define EFI_AHCI_PORT_IS_PRCS BIT22
-#define EFI_AHCI_PORT_IS_IPMS BIT23
-#define EFI_AHCI_PORT_IS_OFS BIT24
-#define EFI_AHCI_PORT_IS_INFS BIT26
-#define EFI_AHCI_PORT_IS_IFS BIT27
-#define EFI_AHCI_PORT_IS_HBDS BIT28
-#define EFI_AHCI_PORT_IS_HBFS BIT29
-#define EFI_AHCI_PORT_IS_TFES BIT30
-#define EFI_AHCI_PORT_IS_CPDS BIT31
-#define EFI_AHCI_PORT_IS_CLEAR 0xFFFFFFFF
-#define EFI_AHCI_PORT_IS_FIS_CLEAR 0x0000000F
-
-#define EFI_AHCI_PORT_IE 0x0014
-#define EFI_AHCI_PORT_CMD 0x0018
-#define EFI_AHCI_PORT_CMD_ST_MASK 0xFFFFFFFE
-#define EFI_AHCI_PORT_CMD_ST BIT0
-#define EFI_AHCI_PORT_CMD_SUD BIT1
-#define EFI_AHCI_PORT_CMD_POD BIT2
-#define EFI_AHCI_PORT_CMD_COL BIT3
-#define EFI_AHCI_PORT_CMD_CR BIT15
-#define EFI_AHCI_PORT_CMD_FRE BIT4
-#define EFI_AHCI_PORT_CMD_FR BIT14
-#define EFI_AHCI_PORT_CMD_MASK ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE | EFI_AHCI_PORT_CMD_COL)
-#define EFI_AHCI_PORT_CMD_PMA BIT17
-#define EFI_AHCI_PORT_CMD_HPCP BIT18
-#define EFI_AHCI_PORT_CMD_MPSP BIT19
-#define EFI_AHCI_PORT_CMD_CPD BIT20
-#define EFI_AHCI_PORT_CMD_ESP BIT21
-#define EFI_AHCI_PORT_CMD_ATAPI BIT24
-#define EFI_AHCI_PORT_CMD_DLAE BIT25
-#define EFI_AHCI_PORT_CMD_ALPE BIT26
-#define EFI_AHCI_PORT_CMD_ASP BIT27
-#define EFI_AHCI_PORT_CMD_ICC_MASK (BIT28 | BIT29 | BIT30 | BIT31)
-#define EFI_AHCI_PORT_CMD_ACTIVE (1 << 28 )
-#define EFI_AHCI_PORT_TFD 0x0020
-#define EFI_AHCI_PORT_TFD_MASK (BIT7 | BIT3 | BIT0)
-#define EFI_AHCI_PORT_TFD_BSY BIT7
-#define EFI_AHCI_PORT_TFD_DRQ BIT3
-#define EFI_AHCI_PORT_TFD_ERR BIT0
-#define EFI_AHCI_PORT_TFD_ERR_MASK 0x00FF00
-#define EFI_AHCI_PORT_SIG 0x0024
-#define EFI_AHCI_PORT_SSTS 0x0028
-#define EFI_AHCI_PORT_SSTS_DET_MASK 0x000F
-#define EFI_AHCI_PORT_SSTS_DET 0x0001
-#define EFI_AHCI_PORT_SSTS_DET_PCE 0x0003
-#define EFI_AHCI_PORT_SSTS_SPD_MASK 0x00F0
-#define EFI_AHCI_PORT_SCTL 0x002C
-#define EFI_AHCI_PORT_SCTL_DET_MASK 0x000F
-#define EFI_AHCI_PORT_SCTL_MASK (~EFI_AHCI_PORT_SCTL_DET_MASK)
-#define EFI_AHCI_PORT_SCTL_DET_INIT 0x0001
-#define EFI_AHCI_PORT_SCTL_DET_PHYCOMM 0x0003
-#define EFI_AHCI_PORT_SCTL_SPD_MASK 0x00F0
-#define EFI_AHCI_PORT_SCTL_IPM_MASK 0x0F00
-#define EFI_AHCI_PORT_SCTL_IPM_INIT 0x0300
-#define EFI_AHCI_PORT_SCTL_IPM_PSD 0x0100
-#define EFI_AHCI_PORT_SCTL_IPM_SSD 0x0200
-#define EFI_AHCI_PORT_SERR 0x0030
-#define EFI_AHCI_PORT_SERR_RDIE BIT0
-#define EFI_AHCI_PORT_SERR_RCE BIT1
-#define EFI_AHCI_PORT_SERR_TDIE BIT8
-#define EFI_AHCI_PORT_SERR_PCDIE BIT9
-#define EFI_AHCI_PORT_SERR_PE BIT10
-#define EFI_AHCI_PORT_SERR_IE BIT11
-#define EFI_AHCI_PORT_SERR_PRC BIT16
-#define EFI_AHCI_PORT_SERR_PIE BIT17
-#define EFI_AHCI_PORT_SERR_CW BIT18
-#define EFI_AHCI_PORT_SERR_BDE BIT19
-#define EFI_AHCI_PORT_SERR_DE BIT20
-#define EFI_AHCI_PORT_SERR_CRCE BIT21
-#define EFI_AHCI_PORT_SERR_HE BIT22
-#define EFI_AHCI_PORT_SERR_LSE BIT23
-#define EFI_AHCI_PORT_SERR_TSTE BIT24
-#define EFI_AHCI_PORT_SERR_UFT BIT25
-#define EFI_AHCI_PORT_SERR_EX BIT26
-#define EFI_AHCI_PORT_ERR_CLEAR 0xFFFFFFFF
-#define EFI_AHCI_PORT_SACT 0x0034
-#define EFI_AHCI_PORT_CI 0x0038
-#define EFI_AHCI_PORT_SNTF 0x003C
-
-
-#pragma pack(1)
-//
-// Command List structure includes total 32 entries.
-// The entry Data structure is listed at the following.
-//
-typedef struct {
- UINT32 AhciCmdCfl:5; //Command FIS Length
- UINT32 AhciCmdA:1; //ATAPI
- UINT32 AhciCmdW:1; //Write
- UINT32 AhciCmdP:1; //Prefetchable
- UINT32 AhciCmdR:1; //Reset
- UINT32 AhciCmdB:1; //BIST
- UINT32 AhciCmdC:1; //Clear Busy upon R_OK
- UINT32 AhciCmdRsvd:1;
- UINT32 AhciCmdPmp:4; //Port Multiplier Port
- UINT32 AhciCmdPrdtl:16; //Physical Region Descriptor Table Length
- UINT32 AhciCmdPrdbc; //Physical Region Descriptor Byte Count
- UINT32 AhciCmdCtba; //Command Table Descriptor Base Address
- UINT32 AhciCmdCtbau; //Command Table Descriptor Base Address Upper 32-BITs
- UINT32 AhciCmdRsvd1[4];
-} EFI_AHCI_COMMAND_LIST;
-
-//
-// This is a software constructed FIS.
-// For Data transfer operations, this is the H2D Register FIS format as
-// specified in the Serial ATA Revision 2.6 specification.
-//
-typedef struct {
- UINT8 AhciCFisType;
- UINT8 AhciCFisPmNum:4;
- UINT8 AhciCFisRsvd:1;
- UINT8 AhciCFisRsvd1:1;
- UINT8 AhciCFisRsvd2:1;
- UINT8 AhciCFisCmdInd:1;
- UINT8 AhciCFisCmd;
- UINT8 AhciCFisFeature;
- UINT8 AhciCFisSecNum;
- UINT8 AhciCFisClyLow;
- UINT8 AhciCFisClyHigh;
- UINT8 AhciCFisDevHead;
- UINT8 AhciCFisSecNumExp;
- UINT8 AhciCFisClyLowExp;
- UINT8 AhciCFisClyHighExp;
- UINT8 AhciCFisFeatureExp;
- UINT8 AhciCFisSecCount;
- UINT8 AhciCFisSecCountExp;
- UINT8 AhciCFisRsvd3;
- UINT8 AhciCFisControl;
- UINT8 AhciCFisRsvd4[4];
- UINT8 AhciCFisRsvd5[44];
-} EFI_AHCI_COMMAND_FIS;
-
-//
-// ACMD: ATAPI command (12 or 16 bytes)
-//
-typedef struct {
- UINT8 AtapiCmd[0x10];
-} EFI_AHCI_ATAPI_COMMAND;
-
-//
-// Physical Region Descriptor Table includes up to 65535 entries
-// The entry Data structure is listed at the following.
-// the actual entry number comes from the PRDTL field in the command
-// list entry for this command slot.
-//
-typedef struct {
- UINT32 AhciPrdtDba; //Data Base Address
- UINT32 AhciPrdtDbau; //Data Base Address Upper 32-BITs
- UINT32 AhciPrdtRsvd;
- UINT32 AhciPrdtDbc:22; //Data Byte Count
- UINT32 AhciPrdtRsvd1:9;
- UINT32 AhciPrdtIoc:1; //Interrupt on Completion
-} EFI_AHCI_COMMAND_PRDT;
-
-//
-// Command table Data strucute which is pointed to by the entry in the command list
-//
-typedef struct {
- EFI_AHCI_COMMAND_FIS CommandFis; // A software constructed FIS.
- EFI_AHCI_ATAPI_COMMAND AtapiCmd; // 12 or 16 bytes ATAPI cmd.
- UINT8 Reserved[0x30];
- EFI_AHCI_COMMAND_PRDT PrdtTable; // The scatter/gather list for Data transfer
-} EFI_AHCI_COMMAND_TABLE;
-
-//
-// Received FIS structure
-//
-typedef struct {
- UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00
- UINT8 AhciDmaSetupFisRsvd[0x04];
- UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20
- UINT8 AhciPioSetupFisRsvd[0x0C];
- UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40
- UINT8 AhciD2HRegisterFisRsvd[0x04];
- UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58
- UINT8 AhciUnknownFis[0x40]; // Unkonwn Fis: offset 0x60
- UINT8 AhciUnknownFisRsvd[0x60];
-} EFI_AHCI_RECEIVED_FIS;
-
-#pragma pack()
-
-typedef struct {
- EFI_AHCI_RECEIVED_FIS *AhciRFis;
- EFI_AHCI_COMMAND_LIST *AhciCmdList;
- EFI_AHCI_COMMAND_TABLE *AhciCommandTable;
-} EFI_AHCI_REGISTERS;
-
-extern EFI_AHCI_REGISTERS mAhciRegisters;
-extern UINT32 mAhciBar;
-
-/**
- Send Buffer cmd to specific device.
-
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The timeout Value of stop.
- @param Buffer The Data Buffer to store IDENTIFY PACKET Data.
-
- @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for executing.
- @retval EFI_SUCCESS The cmd executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciIdentify (
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN OUT ATA_IDENTIFY_DATA *Buffer
- );
-
-/**
- Get AHCI mode base address registers' Value.
-
- @param[in] Bus The bus number of ata host controller.
- @param[in] Device The device number of ata host controller.
- @param[in] Function The function number of ata host controller.
-
- @retval EFI_UNSUPPORTED Return this Value when the BARs is not IO type
- @retval EFI_SUCCESS Get the Base address successfully
- @retval Other Read the pci configureation Data error
-
-**/
-EFI_STATUS
-EFIAPI
-GetAhciBaseAddress (
- IN UINTN Bus,
- IN UINTN Device,
- IN UINTN Function
- );
-
-/**
- Allocate transfer-related Data struct which is used at AHCI mode.
-
- @retval EFI_OUT_OF_RESOURCE The allocation is failure.
- @retval EFI_SUCCESS Successful to allocate memory.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciAllocateResource (
- VOID
- );
-
-/**
- Free allocated transfer-related Data struct which is used at AHCI mode.
-
-**/
-VOID
-EFIAPI
-AhciFreeResource (
- VOID
- );
-
-/**
- Initialize ATA host controller at AHCI mode.
-
- The function is designed to initialize ATA host controller.
-
- @param[in] Port The port number to do initialization.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciModeInitialize (
- UINT8 Port
- );
-
-/**
- Start a PIO Data transfer on specific port.
-
- @param AhciRegisters The pointer to the EFI_AHCI_REGISTERS.
- @param Port The number of port.
- @param PortMultiplier The timeout Value of stop.
- @param AtapiCommand The atapi command will be used for the transfer.
- @param AtapiCommandLength The Length of the atapi command.
- @param Read The transfer direction.
- @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
- @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
- @param MemoryAddr The pointer to the Data Buffer.
- @param DataCount The Data count to be transferred.
- @param Timeout The timeout Value of non Data transfer.
-
- @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error occurs.
- @retval EFI_TIMEOUT The operation is time out.
- @retval EFI_UNSUPPORTED The device is not ready for transfer.
- @retval EFI_SUCCESS The PIO Data transfer executes successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-AhciPioTransfer (
- IN EFI_AHCI_REGISTERS *AhciRegisters,
- IN UINT8 Port,
- IN UINT8 PortMultiplier,
- IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
- IN UINT8 AtapiCommandLength,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN OUT VOID *MemoryAddr,
- IN UINT32 DataCount,
- IN UINT64 Timeout
- );
-
-
-#endif
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.c b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.c
deleted file mode 100644
index 76204625dd6e..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.c
+++ /dev/null
@@ -1,767 +0,0 @@
-/** @file
- This driver is used for Opal Password Feature support at IDE mode.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "OpalPasswordSmm.h"
-
-/**
- Write multiple words of Data to the IDE Data port.
- Call the IO abstraction once to do the complete read,
- not one word at a time
-
- @param Port IO port to read
- @param Count No. of UINT16's to read
- @param Buffer Pointer to the Data Buffer for read
-
-**/
-VOID
-EFIAPI
-IdeWritePortWMultiple (
- IN UINT16 Port,
- IN UINTN Count,
- IN UINT16 *Buffer
- )
-{
- UINTN Index;
-
- for (Index = 0; Index < Count; Index++) {
- IoWrite16 (Port, Buffer[Index]);
- }
-}
-
-/**
- Reads multiple words of Data from the IDE Data port.
- Call the IO abstraction once to do the complete read,
- not one word at a time
-
- @param Port IO port to read
- @param Count Number of UINT16's to read
- @param Buffer Pointer to the Data Buffer for read
-
-**/
-VOID
-EFIAPI
-IdeReadPortWMultiple (
- IN UINT16 Port,
- IN UINTN Count,
- IN UINT16 *Buffer
- )
-{
- UINTN Index;
-
- for (Index = 0; Index < Count; Index++) {
- Buffer[Count] = IoRead16 (Port);
- }
-}
-
-/**
- This function is used to analyze the Status Register and print out
- some debug information and if there is ERR bit set in the Status
- Register, the Error Register's Value is also be parsed and print out.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
-
-**/
-VOID
-EFIAPI
-DumpAllIdeRegisters (
- IN EFI_IDE_REGISTERS *IdeRegisters
- )
-{
- ASSERT (IdeRegisters != NULL);
-
- DEBUG_CODE_BEGIN ();
- if ((IoRead8 (IdeRegisters->CmdOrStatus) & ATA_STSREG_DWF) != 0) {
- DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Write Fault\n", IoRead8 (IdeRegisters->CmdOrStatus)));
- }
-
- if ((IoRead8 (IdeRegisters->CmdOrStatus) & ATA_STSREG_CORR) != 0) {
- DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Corrected Data\n", IoRead8 (IdeRegisters->CmdOrStatus)));
- }
-
- if ((IoRead8 (IdeRegisters->CmdOrStatus) & ATA_STSREG_ERR) != 0) {
- if ((IoRead8 (IdeRegisters->ErrOrFeature) & ATA_ERRREG_BBK) != 0) {
- DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Bad Block Detected\n", IoRead8 (IdeRegisters->ErrOrFeature)));
- }
-
- if ((IoRead8 (IdeRegisters->ErrOrFeature) & ATA_ERRREG_UNC) != 0) {
- DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Uncorrectable Data\n", IoRead8 (IdeRegisters->ErrOrFeature)));
- }
-
- if ((IoRead8 (IdeRegisters->ErrOrFeature) & ATA_ERRREG_MC) != 0) {
- DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Media Change\n", IoRead8 (IdeRegisters->ErrOrFeature)));
- }
-
- if ((IoRead8 (IdeRegisters->ErrOrFeature) & ATA_ERRREG_ABRT) != 0) {
- DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Abort\n", IoRead8 (IdeRegisters->ErrOrFeature)));
- }
-
- if ((IoRead8 (IdeRegisters->ErrOrFeature) & ATA_ERRREG_TK0NF) != 0) {
- DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Track 0 Not Found\n", IoRead8 (IdeRegisters->ErrOrFeature)));
- }
-
- if ((IoRead8 (IdeRegisters->ErrOrFeature) & ATA_ERRREG_AMNF) != 0) {
- DEBUG ((EFI_D_ERROR, "CheckRegisterStatus()-- %02x : Error : Address Mark Not Found\n", IoRead8 (IdeRegisters->ErrOrFeature)));
- }
- }
- DEBUG_CODE_END ();
-}
-
-/**
- This function is used to analyze the Status Register and print out
- some debug information and if there is ERR bit set in the Status
- Register, the Error Register's Value is also be parsed and print out.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
-
- @retval EFI_SUCCESS No err information in the Status Register.
- @retval EFI_DEVICE_ERROR Any err information in the Status Register.
-
-**/
-EFI_STATUS
-EFIAPI
-CheckStatusRegister (
- IN EFI_IDE_REGISTERS *IdeRegisters
- )
-{
- EFI_STATUS Status;
- UINT8 StatusRegister;
-
- ASSERT (IdeRegisters != NULL);
-
- StatusRegister = IoRead8 (IdeRegisters->CmdOrStatus);
-
- if ((StatusRegister & (ATA_STSREG_ERR | ATA_STSREG_DWF | ATA_STSREG_CORR)) == 0) {
- Status = EFI_SUCCESS;
- } else {
- Status = EFI_DEVICE_ERROR;
- }
-
- return Status;
-}
-
-/**
- This function is used to poll for the DRQ bit clear in the Status
- Register. DRQ is cleared when the device is finished transferring Data.
- So this function is called after Data transfer is finished.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
- @param Timeout The time to complete the command.
-
- @retval EFI_SUCCESS DRQ bit clear within the time out.
- @retval EFI_TIMEOUT DRQ bit not clear within the time out.
-
- @note
- Read Status Register will clear interrupt status.
-
-**/
-EFI_STATUS
-EFIAPI
-DRQClear (
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT32 Delay;
- UINT8 StatusRegister;
-
- ASSERT (IdeRegisters != NULL);
-
- Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
- do {
- StatusRegister = IoRead8 (IdeRegisters->CmdOrStatus);
-
- //
- // wait for BSY == 0 and DRQ == 0
- //
- if ((StatusRegister & ATA_STSREG_BSY) == 0) {
-
- if ((StatusRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
- return EFI_DEVICE_ERROR;
- } else {
- return EFI_SUCCESS;
- }
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
-
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-}
-/**
- This function is used to poll for the DRQ bit clear in the Alternate
- Status Register. DRQ is cleared when the device is finished
- transferring Data. So this function is called after Data transfer
- is finished.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
- @param Timeout The time to complete the command.
-
- @retval EFI_SUCCESS DRQ bit clear within the time out.
-
- @retval EFI_TIMEOUT DRQ bit not clear within the time out.
- @note Read Alternate Status Register will not clear interrupt status.
-
-**/
-EFI_STATUS
-EFIAPI
-DRQClear2 (
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT32 Delay;
- UINT8 AltRegister;
-
- ASSERT (IdeRegisters != NULL);
-
- Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
- do {
- AltRegister = IoRead8 (IdeRegisters->AltOrDev);
-
- //
- // wait for BSY == 0 and DRQ == 0
- //
- if ((AltRegister & ATA_STSREG_BSY) == 0) {
- if ((AltRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
- return EFI_DEVICE_ERROR;
- } else {
- return EFI_SUCCESS;
- }
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
-
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-}
-
-
-/**
- This function is used to poll for the DRQ bit set in the Alternate Status Register.
- DRQ is set when the device is ready to transfer Data. So this function is called after
- the command is sent to the device and before required Data is transferred.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
- @param Timeout The time to complete the command.
-
- @retval EFI_SUCCESS DRQ bit set within the time out.
- @retval EFI_TIMEOUT DRQ bit not set within the time out.
- @retval EFI_ABORTED DRQ bit not set caused by the command abort.
- @note Read Alternate Status Register will not clear interrupt status.
-
-**/
-EFI_STATUS
-EFIAPI
-DRQReady2 (
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT32 Delay;
- UINT8 AltRegister;
- UINT8 ErrorRegister;
-
- ASSERT (IdeRegisters != NULL);
-
- Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
-
- do {
- //
- // Read Alternate Status Register will not clear interrupt status
- //
- AltRegister = IoRead8 (IdeRegisters->AltOrDev);
- //
- // BSY == 0 , DRQ == 1
- //
- if ((AltRegister & ATA_STSREG_BSY) == 0) {
- if ((AltRegister & ATA_STSREG_ERR) == ATA_STSREG_ERR) {
- ErrorRegister = IoRead8 (IdeRegisters->ErrOrFeature);
-
- if ((ErrorRegister & ATA_ERRREG_ABRT) == ATA_ERRREG_ABRT) {
- return EFI_ABORTED;
- }
- return EFI_DEVICE_ERROR;
- }
-
- if ((AltRegister & ATA_STSREG_DRQ) == ATA_STSREG_DRQ) {
- return EFI_SUCCESS;
- } else {
- return EFI_NOT_READY;
- }
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-}
-
-/**
- This function is used to poll for the BSY bit clear in the Status Register. BSY
- is clear when the device is not busy. Every command must be sent after device is not busy.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
- @param Timeout The time to complete the command.
-
- @retval EFI_SUCCESS BSY bit clear within the time out.
- @retval EFI_TIMEOUT BSY bit not clear within the time out.
-
- @note Read Status Register will clear interrupt status.
-**/
-EFI_STATUS
-EFIAPI
-WaitForBSYClear (
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT64 Timeout
- )
-{
- UINT32 Delay;
- UINT8 StatusRegister;
-
- ASSERT (IdeRegisters != NULL);
-
- Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
- do {
- StatusRegister = IoRead8 (IdeRegisters->CmdOrStatus);
-
- if ((StatusRegister & ATA_STSREG_BSY) == 0x00) {
- return EFI_SUCCESS;
- }
-
- //
- // Stall for 100 microseconds.
- //
- MicroSecondDelay (100);
-
- Delay--;
-
- } while (Delay > 0);
-
- return EFI_TIMEOUT;
-}
-
-/**
- Get IDE i/o port registers' base addresses by mode.
-
- In 'Compatibility' mode, use fixed addresses.
- In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's
- Configuration Space.
-
- The steps to get IDE i/o port registers' base addresses for each channel
- as follows:
-
- 1. Examine the Programming Interface byte of the Class Code fields in PCI IDE
- controller's Configuration Space to determine the operating mode.
-
- 2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below.
- ___________________________________________
- | | Command Block | Control Block |
- | Channel | Registers | Registers |
- |___________|_______________|_______________|
- | Primary | 1F0h - 1F7h | 3F6h - 3F7h |
- |___________|_______________|_______________|
- | Secondary | 170h - 177h | 376h - 377h |
- |___________|_______________|_______________|
-
- Table 1. Compatibility resource mappings
-
- b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs
- in IDE controller's PCI Configuration Space, shown in the Table 2 below.
- ___________________________________________________
- | | Command Block | Control Block |
- | Channel | Registers | Registers |
- |___________|___________________|___________________|
- | Primary | BAR at offset 0x10| BAR at offset 0x14|
- |___________|___________________|___________________|
- | Secondary | BAR at offset 0x18| BAR at offset 0x1C|
- |___________|___________________|___________________|
-
- Table 2. BARs for Register Mapping
-
- @param[in] Bus The bus number of ata host controller.
- @param[in] Device The device number of ata host controller.
- @param[in] Function The function number of ata host controller.
- @param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
- store the IDE i/o port registers' base addresses
-
- @retval EFI_UNSUPPORTED Return this Value when the BARs is not IO type
- @retval EFI_SUCCESS Get the Base address successfully
- @retval Other Read the pci configureation Data error
-
-**/
-EFI_STATUS
-EFIAPI
-GetIdeRegisterIoAddr (
- IN UINTN Bus,
- IN UINTN Device,
- IN UINTN Function,
- IN OUT EFI_IDE_REGISTERS *IdeRegisters
- )
-{
- UINT16 CommandBlockBaseAddr;
- UINT16 ControlBlockBaseAddr;
- UINT8 ClassCode;
- UINT32 BaseAddress[4];
-
- if (IdeRegisters == NULL) {
- return EFI_INVALID_PARAMETER;
- }
-
- ClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x9));
- BaseAddress[0] = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x10));
- BaseAddress[1] = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x14));
- BaseAddress[2] = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x18));
- BaseAddress[3] = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x1C));
-
- if ((ClassCode & IDE_PRIMARY_OPERATING_MODE) == 0) {
- CommandBlockBaseAddr = 0x1f0;
- ControlBlockBaseAddr = 0x3f6;
- } else {
- //
- // The BARs should be of IO type
- //
- if ((BaseAddress[0] & BIT0) == 0 ||
- (BaseAddress[1] & BIT0) == 0) {
- return EFI_UNSUPPORTED;
- }
-
- CommandBlockBaseAddr = (UINT16) (BaseAddress[0] & 0x0000fff8);
- ControlBlockBaseAddr = (UINT16) ((BaseAddress[1] & 0x0000fffc) + 2);
- }
-
- //
- // Calculate IDE primary channel I/O register base address.
- //
- IdeRegisters[EfiIdePrimary].Data = CommandBlockBaseAddr;
- IdeRegisters[EfiIdePrimary].ErrOrFeature = (UINT16) (CommandBlockBaseAddr + 0x01);
- IdeRegisters[EfiIdePrimary].SectorCount = (UINT16) (CommandBlockBaseAddr + 0x02);
- IdeRegisters[EfiIdePrimary].SectorNumber = (UINT16) (CommandBlockBaseAddr + 0x03);
- IdeRegisters[EfiIdePrimary].CylinderLsb = (UINT16) (CommandBlockBaseAddr + 0x04);
- IdeRegisters[EfiIdePrimary].CylinderMsb = (UINT16) (CommandBlockBaseAddr + 0x05);
- IdeRegisters[EfiIdePrimary].Head = (UINT16) (CommandBlockBaseAddr + 0x06);
- IdeRegisters[EfiIdePrimary].CmdOrStatus = (UINT16) (CommandBlockBaseAddr + 0x07);
- IdeRegisters[EfiIdePrimary].AltOrDev = ControlBlockBaseAddr;
-
- if ((ClassCode & IDE_SECONDARY_OPERATING_MODE) == 0) {
- CommandBlockBaseAddr = 0x170;
- ControlBlockBaseAddr = 0x376;
- } else {
- //
- // The BARs should be of IO type
- //
- if ((BaseAddress[2] & BIT0) == 0 ||
- (BaseAddress[3] & BIT0) == 0) {
- return EFI_UNSUPPORTED;
- }
-
- CommandBlockBaseAddr = (UINT16) (BaseAddress[2] & 0x0000fff8);
- ControlBlockBaseAddr = (UINT16) ((BaseAddress[3] & 0x0000fffc) + 2);
- }
-
- //
- // Calculate IDE secondary channel I/O register base address.
- //
- IdeRegisters[EfiIdeSecondary].Data = CommandBlockBaseAddr;
- IdeRegisters[EfiIdeSecondary].ErrOrFeature = (UINT16) (CommandBlockBaseAddr + 0x01);
- IdeRegisters[EfiIdeSecondary].SectorCount = (UINT16) (CommandBlockBaseAddr + 0x02);
- IdeRegisters[EfiIdeSecondary].SectorNumber = (UINT16) (CommandBlockBaseAddr + 0x03);
- IdeRegisters[EfiIdeSecondary].CylinderLsb = (UINT16) (CommandBlockBaseAddr + 0x04);
- IdeRegisters[EfiIdeSecondary].CylinderMsb = (UINT16) (CommandBlockBaseAddr + 0x05);
- IdeRegisters[EfiIdeSecondary].Head = (UINT16) (CommandBlockBaseAddr + 0x06);
- IdeRegisters[EfiIdeSecondary].CmdOrStatus = (UINT16) (CommandBlockBaseAddr + 0x07);
- IdeRegisters[EfiIdeSecondary].AltOrDev = ControlBlockBaseAddr;
-
- return EFI_SUCCESS;
-}
-
-/**
- Send ATA Ext command into device with NON_DATA protocol.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
- @param AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK Data structure.
- @param Timeout The time to complete the command.
-
- @retval EFI_SUCCESS Reading succeed
- @retval EFI_DEVICE_ERROR Error executing commands on this device.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaIssueCommand (
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN UINT64 Timeout
- )
-{
- EFI_STATUS Status;
- UINT8 DeviceHead;
- UINT8 AtaCommand;
-
- ASSERT (IdeRegisters != NULL);
- ASSERT (AtaCommandBlock != NULL);
-
- DeviceHead = AtaCommandBlock->AtaDeviceHead;
- AtaCommand = AtaCommandBlock->AtaCommand;
-
- Status = WaitForBSYClear (IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Select device (bit4), set LBA mode(bit6) (use 0xe0 for compatibility)
- //
- IoWrite8 (IdeRegisters->Head, (UINT8) (0xe0 | DeviceHead));
-
- //
- // set all the command parameters
- // Before write to all the following registers, BSY and DRQ must be 0.
- //
- Status = DRQClear2 (IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- return EFI_DEVICE_ERROR;
- }
-
- //
- // Fill the feature register, which is a two-byte FIFO. Need write twice.
- //
- IoWrite8 (IdeRegisters->ErrOrFeature, AtaCommandBlock->AtaFeaturesExp);
- IoWrite8 (IdeRegisters->ErrOrFeature, AtaCommandBlock->AtaFeatures);
-
- //
- // Fill the sector count register, which is a two-byte FIFO. Need write twice.
- //
- IoWrite8 (IdeRegisters->SectorCount, AtaCommandBlock->AtaSectorCountExp);
- IoWrite8 (IdeRegisters->SectorCount, AtaCommandBlock->AtaSectorCount);
-
- //
- // Fill the start LBA registers, which are also two-byte FIFO
- //
- IoWrite8 (IdeRegisters->SectorNumber, AtaCommandBlock->AtaSectorNumberExp);
- IoWrite8 (IdeRegisters->SectorNumber, AtaCommandBlock->AtaSectorNumber);
-
- IoWrite8 (IdeRegisters->CylinderLsb, AtaCommandBlock->AtaCylinderLowExp);
- IoWrite8 (IdeRegisters->CylinderLsb, AtaCommandBlock->AtaCylinderLow);
-
- IoWrite8 (IdeRegisters->CylinderMsb, AtaCommandBlock->AtaCylinderHighExp);
- IoWrite8 (IdeRegisters->CylinderMsb, AtaCommandBlock->AtaCylinderHigh);
-
- //
- // Send command via Command Register
- //
- IoWrite8 (IdeRegisters->CmdOrStatus, AtaCommand);
-
- //
- // Stall at least 400 microseconds.
- //
- MicroSecondDelay (400);
-
- return EFI_SUCCESS;
-}
-
-/**
- This function is used to send out ATA commands conforms to the PIO Data In Protocol.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
- @param Buffer A pointer to the source Buffer for the Data.
- @param ByteCount The Length of the Data.
- @param Read Flag used to determine the Data transfer direction.
- Read equals 1, means Data transferred from device to host;
- Read equals 0, means Data transferred from host to device.
- @param AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK Data structure.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK Data structure.
- @param Timeout The time to complete the command.
-
- @retval EFI_SUCCESS send out the ATA command and device send required Data successfully.
- @retval EFI_DEVICE_ERROR command sent failed.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPioDataInOut (
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN OUT VOID *Buffer,
- IN UINT64 ByteCount,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout
- )
-{
- UINTN WordCount;
- UINTN Increment;
- UINT16 *Buffer16;
- EFI_STATUS Status;
-
- if ((IdeRegisters == NULL) || (Buffer == NULL) || (AtaCommandBlock == NULL)) {
- return EFI_INVALID_PARAMETER;
- }
-
- //
- // Issue ATA command
- //
- Status = AtaIssueCommand (IdeRegisters, AtaCommandBlock, Timeout);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- Buffer16 = (UINT16 *) Buffer;
-
- //
- // According to PIO Data in protocol, host can perform a series of reads to
- // the Data register after each time device set DRQ ready;
- // The Data Size of "a series of read" is command specific.
- // For most ATA command, Data Size received from device will not exceed
- // 1 sector, hence the Data Size for "a series of read" can be the whole Data
- // Size of one command request.
- // For ATA command such as Read Sector command, the Data Size of one ATA
- // command request is often larger than 1 sector, according to the
- // Read Sector command, the Data Size of "a series of read" is exactly 1
- // sector.
- // Here for simplification reason, we specify the Data Size for
- // "a series of read" to 1 sector (256 words) if Data Size of one ATA command
- // request is larger than 256 words.
- //
- Increment = 256;
-
- //
- // used to record bytes of currently transfered Data
- //
- WordCount = 0;
-
- while (WordCount < RShiftU64(ByteCount, 1)) {
- //
- // Poll DRQ bit set, Data transfer can be performed only when DRQ is ready
- //
- Status = DRQReady2 (IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- //
- // Get the byte count for one series of read
- //
- if ((WordCount + Increment) > RShiftU64(ByteCount, 1)) {
- Increment = (UINTN)(RShiftU64(ByteCount, 1) - WordCount);
- }
-
- if (Read) {
- IdeReadPortWMultiple (
- IdeRegisters->Data,
- Increment,
- Buffer16
- );
- } else {
- IdeWritePortWMultiple (
- IdeRegisters->Data,
- Increment,
- Buffer16
- );
- }
-
- Status = CheckStatusRegister (IdeRegisters);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
- WordCount += Increment;
- Buffer16 += Increment;
- }
-
- Status = DRQClear (IdeRegisters, Timeout);
- if (EFI_ERROR (Status)) {
- Status = EFI_DEVICE_ERROR;
- goto Exit;
- }
-
-Exit:
- //
- // Dump All Ide registers to ATA_STATUS_BLOCK
- //
- DumpAllIdeRegisters (IdeRegisters);
-
- return Status;
-}
-
-/**
- Sends out an ATA Identify Command to the specified device.
-
- This function sends out the ATA Identify Command to the
- specified device. Only ATA device responses to this command. If
- the command succeeds, it returns the Identify Data structure which
- contains information about the device. This function extracts the
- information it needs to fill the IDE_BLK_IO_DEV Data structure,
- including device type, media block Size, media capacity, and etc.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
- @param Channel The channel number of device.
- @param Device The device number of device.
- @param Buffer A pointer to Data Buffer which is used to contain IDENTIFY Data.
-
- @retval EFI_SUCCESS Identify ATA device successfully.
- @retval EFI_DEVICE_ERROR ATA Identify Device Command failed or device is not ATA device.
- @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
-**/
-EFI_STATUS
-EFIAPI
-AtaIdentify (
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN OUT ATA_IDENTIFY_DATA *Buffer
- )
-{
- EFI_STATUS Status;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
-
- ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
-
- AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE;
- AtaCommandBlock.AtaDeviceHead = (UINT8)(Device << 0x4);
-
- Status = AtaPioDataInOut (
- IdeRegisters,
- Buffer,
- sizeof (ATA_IDENTIFY_DATA),
- TRUE,
- &AtaCommandBlock,
- NULL,
- ATA_TIMEOUT
- );
-
- return Status;
-}
-
-
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.h b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.h
deleted file mode 100644
index ba94a9750503..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalIdeMode.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/** @file
- Header file for IDE mode of ATA host controller.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-
-#ifndef __OPAL_PASSWORD_IDE_MODE_H__
-#define __OPAL_PASSWORD_IDE_MODE_H__
-
-typedef enum {
- EfiIdePrimary = 0,
- EfiIdeSecondary = 1,
- EfiIdeMaxChannel = 2
-} EFI_IDE_CHANNEL;
-
-typedef enum {
- EfiIdeMaster = 0,
- EfiIdeSlave = 1,
- EfiIdeMaxDevice = 2
-} EFI_IDE_DEVICE;
-
-//
-// IDE registers set
-//
-typedef struct {
- UINT16 Data;
- UINT16 ErrOrFeature;
- UINT16 SectorCount;
- UINT16 SectorNumber;
- UINT16 CylinderLsb;
- UINT16 CylinderMsb;
- UINT16 Head;
- UINT16 CmdOrStatus;
- UINT16 AltOrDev;
-} EFI_IDE_REGISTERS;
-
-//
-// Bit definitions in Programming Interface byte of the Class Code field
-// in PCI IDE controller's Configuration Space
-//
-#define IDE_PRIMARY_OPERATING_MODE BIT0
-#define IDE_PRIMARY_PROGRAMMABLE_INDICATOR BIT1
-#define IDE_SECONDARY_OPERATING_MODE BIT2
-#define IDE_SECONDARY_PROGRAMMABLE_INDICATOR BIT3
-
-/**
- Get IDE i/o port registers' base addresses by mode.
-
- In 'Compatibility' mode, use fixed addresses.
- In Native-PCI mode, get base addresses from BARs in the PCI IDE controller's
- Configuration Space.
-
- The steps to get IDE i/o port registers' base addresses for each channel
- as follows:
-
- 1. Examine the Programming Interface byte of the Class Code fields in PCI IDE
- controller's Configuration Space to determine the operating mode.
-
- 2. a) In 'Compatibility' mode, use fixed addresses shown in the Table 1 below.
- ___________________________________________
- | | Command Block | Control Block |
- | Channel | Registers | Registers |
- |___________|_______________|_______________|
- | Primary | 1F0h - 1F7h | 3F6h - 3F7h |
- |___________|_______________|_______________|
- | Secondary | 170h - 177h | 376h - 377h |
- |___________|_______________|_______________|
-
- Table 1. Compatibility resource mappings
-
- b) In Native-PCI mode, IDE registers are mapped into IO space using the BARs
- in IDE controller's PCI Configuration Space, shown in the Table 2 below.
- ___________________________________________________
- | | Command Block | Control Block |
- | Channel | Registers | Registers |
- |___________|___________________|___________________|
- | Primary | BAR at offset 0x10| BAR at offset 0x14|
- |___________|___________________|___________________|
- | Secondary | BAR at offset 0x18| BAR at offset 0x1C|
- |___________|___________________|___________________|
-
- Table 2. BARs for Register Mapping
-
- @param[in] Bus The bus number of ata host controller.
- @param[in] Device The device number of ata host controller.
- @param[in] Function The function number of ata host controller.
- @param[in, out] IdeRegisters Pointer to EFI_IDE_REGISTERS which is used to
- store the IDE i/o port registers' base addresses
-
- @retval EFI_UNSUPPORTED Return this Value when the BARs is not IO type
- @retval EFI_SUCCESS Get the Base address successfully
- @retval Other Read the pci configureation Data error
-
-**/
-EFI_STATUS
-EFIAPI
-GetIdeRegisterIoAddr (
- IN UINTN Bus,
- IN UINTN Device,
- IN UINTN Function,
- IN OUT EFI_IDE_REGISTERS *IdeRegisters
- );
-
-/**
- Sends out an ATA Identify Command to the specified device.
-
- This function sends out the ATA Identify Command to the
- specified device. Only ATA device responses to this command. If
- the command succeeds, it returns the Identify Data structure which
- contains information about the device. This function extracts the
- information it needs to fill the IDE_BLK_IO_DEV Data structure,
- including device type, media block Size, media capacity, and etc.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
- @param Channel The channel number of device.
- @param Device The device number of device.
- @param Buffer A pointer to Data Buffer which is used to contain IDENTIFY Data.
-
- @retval EFI_SUCCESS Identify ATA device successfully.
- @retval EFI_DEVICE_ERROR ATA Identify Device Command failed or device is not ATA device.
- @retval EFI_OUT_OF_RESOURCES Allocate memory failed.
-**/
-EFI_STATUS
-EFIAPI
-AtaIdentify (
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN UINT8 Channel,
- IN UINT8 Device,
- IN OUT ATA_IDENTIFY_DATA *Buffer
- );
-
-/**
- This function is used to send out ATA commands conforms to the PIO Data In Protocol.
-
- @param IdeRegisters A pointer to EFI_IDE_REGISTERS Data structure.
- @param Buffer A pointer to the source Buffer for the Data.
- @param ByteCount The Length of the Data.
- @param Read Flag used to determine the Data transfer direction.
- Read equals 1, means Data transferred from device to host;
- Read equals 0, means Data transferred from host to device.
- @param AtaCommandBlock A pointer to EFI_ATA_COMMAND_BLOCK Data structure.
- @param AtaStatusBlock A pointer to EFI_ATA_STATUS_BLOCK Data structure.
- @param Timeout The time to complete the command.
-
- @retval EFI_SUCCESS send out the ATA command and device send required Data successfully.
- @retval EFI_DEVICE_ERROR command sent failed.
-
-**/
-EFI_STATUS
-EFIAPI
-AtaPioDataInOut (
- IN EFI_IDE_REGISTERS *IdeRegisters,
- IN OUT VOID *Buffer,
- IN UINT64 ByteCount,
- IN BOOLEAN Read,
- IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
- IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
- IN UINT64 Timeout
- );
-
-
-#endif
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.c b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.c
deleted file mode 100644
index a47d2764c31c..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.c
+++ /dev/null
@@ -1,2165 +0,0 @@
-/** @file
- Provide functions to initialize NVME controller and perform NVME commands
-
-Copyright (c) 2016 - 2017, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "OpalPasswordSmm.h"
-
-
-#define ALIGN(v, a) (UINTN)((((v) - 1) | ((a) - 1)) + 1)
-
-///
-/// NVME Host controller registers operation
-///
-#define NVME_GET_CAP(Nvme, Cap) NvmeMmioRead (Cap, Nvme->Nbar + NVME_CAP_OFFSET, sizeof (NVME_CAP))
-#define NVME_GET_CC(Nvme, Cc) NvmeMmioRead (Cc, Nvme->Nbar + NVME_CC_OFFSET, sizeof (NVME_CC))
-#define NVME_SET_CC(Nvme, Cc) NvmeMmioWrite (Nvme->Nbar + NVME_CC_OFFSET, Cc, sizeof (NVME_CC))
-#define NVME_GET_CSTS(Nvme, Csts) NvmeMmioRead (Csts, Nvme->Nbar + NVME_CSTS_OFFSET, sizeof (NVME_CSTS))
-#define NVME_GET_AQA(Nvme, Aqa) NvmeMmioRead (Aqa, Nvme->Nbar + NVME_AQA_OFFSET, sizeof (NVME_AQA))
-#define NVME_SET_AQA(Nvme, Aqa) NvmeMmioWrite (Nvme->Nbar + NVME_AQA_OFFSET, Aqa, sizeof (NVME_AQA))
-#define NVME_GET_ASQ(Nvme, Asq) NvmeMmioRead (Asq, Nvme->Nbar + NVME_ASQ_OFFSET, sizeof (NVME_ASQ))
-#define NVME_SET_ASQ(Nvme, Asq) NvmeMmioWrite (Nvme->Nbar + NVME_ASQ_OFFSET, Asq, sizeof (NVME_ASQ))
-#define NVME_GET_ACQ(Nvme, Acq) NvmeMmioRead (Acq, Nvme->Nbar + NVME_ACQ_OFFSET, sizeof (NVME_ACQ))
-#define NVME_SET_ACQ(Nvme, Acq) NvmeMmioWrite (Nvme->Nbar + NVME_ACQ_OFFSET, Acq, sizeof (NVME_ACQ))
-#define NVME_GET_VER(Nvme, Ver) NvmeMmioRead (Ver, Nvme->Nbar + NVME_VER_OFFSET, sizeof (NVME_VER))
-#define NVME_SET_SQTDBL(Nvme, Qid, Sqtdbl) NvmeMmioWrite (Nvme->Nbar + NVME_SQTDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Sqtdbl, sizeof (NVME_SQTDBL))
-#define NVME_SET_CQHDBL(Nvme, Qid, Cqhdbl) NvmeMmioWrite (Nvme->Nbar + NVME_CQHDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Cqhdbl, sizeof (NVME_CQHDBL))
-
-///
-/// Base memory address
-///
-enum {
- BASEMEM_CONTROLLER_DATA,
- BASEMEM_IDENTIFY_DATA,
- BASEMEM_ASQ,
- BASEMEM_ACQ,
- BASEMEM_SQ,
- BASEMEM_CQ,
- BASEMEM_PRP,
- BASEMEM_SECURITY,
- MAX_BASEMEM_COUNT
-};
-
-///
-/// All of base memories are 4K(0x1000) alignment
-///
-#define NVME_MEM_BASE(Nvme) ((UINTN)(Nvme->BaseMem))
-#define NVME_CONTROL_DATA_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_CONTROLLER_DATA)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_NAMESPACE_DATA_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_IDENTIFY_DATA)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_ASQ_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ASQ)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_ACQ_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ACQ)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_SQ_BASE(Nvme, index) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SQ) + ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_CQ_BASE(Nvme, index) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_CQ) + ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_PRP_BASE(Nvme, index) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_PRP) + ((index)*NVME_PRP_SIZE)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-#define NVME_SEC_BASE(Nvme) (ALIGN (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SECURITY)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
-
-/**
- Transfer MMIO Data to memory.
-
- @param[in,out] MemBuffer - Destination: Memory address
- @param[in] MmioAddr - Source: MMIO address
- @param[in] Size - Size for read
-
- @retval EFI_SUCCESS - MMIO read sucessfully
-**/
-EFI_STATUS
-NvmeMmioRead (
- IN OUT VOID *MemBuffer,
- IN UINTN MmioAddr,
- IN UINTN Size
- )
-{
- UINTN Offset;
- UINT8 Data;
- UINT8 *Ptr;
-
- // priority has adjusted
- switch (Size) {
- case 4:
- *((UINT32 *)MemBuffer) = MmioRead32 (MmioAddr);
- break;
-
- case 8:
- *((UINT64 *)MemBuffer) = MmioRead64 (MmioAddr);
- break;
-
- case 2:
- *((UINT16 *)MemBuffer) = MmioRead16 (MmioAddr);
- break;
-
- case 1:
- *((UINT8 *)MemBuffer) = MmioRead8 (MmioAddr);
- break;
-
- default:
- Ptr = (UINT8 *)MemBuffer;
- for (Offset = 0; Offset < Size; Offset += 1) {
- Data = MmioRead8 (MmioAddr + Offset);
- Ptr[Offset] = Data;
- }
- break;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Transfer memory data to MMIO.
-
- @param[in,out] MmioAddr - Destination: MMIO address
- @param[in] MemBuffer - Source: Memory address
- @param[in] Size - Size for write
-
- @retval EFI_SUCCESS - MMIO write sucessfully
-**/
-EFI_STATUS
-NvmeMmioWrite (
- IN OUT UINTN MmioAddr,
- IN VOID *MemBuffer,
- IN UINTN Size
- )
-{
- UINTN Offset;
- UINT8 Data;
- UINT8 *Ptr;
-
- // priority has adjusted
- switch (Size) {
- case 4:
- MmioWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
- break;
-
- case 8:
- MmioWrite64 (MmioAddr, *((UINT64 *)MemBuffer));
- break;
-
- case 2:
- MmioWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
- break;
-
- case 1:
- MmioWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
- break;
-
- default:
- Ptr = (UINT8 *)MemBuffer;
- for (Offset = 0; Offset < Size; Offset += 1) {
- Data = Ptr[Offset];
- MmioWrite8 (MmioAddr + Offset, Data);
- }
- break;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Transfer MMIO data to memory.
-
- @param[in,out] MemBuffer - Destination: Memory address
- @param[in] MmioAddr - Source: MMIO address
- @param[in] Size - Size for read
-
- @retval EFI_SUCCESS - MMIO read sucessfully
-**/
-EFI_STATUS
-OpalPciRead (
- IN OUT VOID *MemBuffer,
- IN UINTN MmioAddr,
- IN UINTN Size
- )
-{
- UINTN Offset;
- UINT8 Data;
- UINT8 *Ptr;
-
- // priority has adjusted
- switch (Size) {
- case 4:
- *((UINT32 *)MemBuffer) = PciRead32 (MmioAddr);
- break;
-
- case 2:
- *((UINT16 *)MemBuffer) = PciRead16 (MmioAddr);
- break;
-
- case 1:
- *((UINT8 *)MemBuffer) = PciRead8 (MmioAddr);
- break;
-
- default:
- Ptr = (UINT8 *)MemBuffer;
- for (Offset = 0; Offset < Size; Offset += 1) {
- Data = PciRead8 (MmioAddr + Offset);
- Ptr[Offset] = Data;
- }
- break;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Transfer memory data to MMIO.
-
- @param[in,out] MmioAddr - Destination: MMIO address
- @param[in] MemBuffer - Source: Memory address
- @param[in] Size - Size for write
-
- @retval EFI_SUCCESS - MMIO write sucessfully
-**/
-EFI_STATUS
-OpalPciWrite (
- IN OUT UINTN MmioAddr,
- IN VOID *MemBuffer,
- IN UINTN Size
- )
-{
- UINTN Offset;
- UINT8 Data;
- UINT8 *Ptr;
-
- // priority has adjusted
- switch (Size) {
- case 4:
- PciWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
- break;
-
- case 2:
- PciWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
- break;
-
- case 1:
- PciWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
- break;
-
- default:
- Ptr = (UINT8 *)MemBuffer;
- for (Offset = 0; Offset < Size; Offset += 1) {
- Data = Ptr[Offset];
- PciWrite8 (MmioAddr + Offset, Data);
- }
- break;
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Get total pages for specific NVME based memory.
-
- @param[in] BaseMemIndex - The Index of BaseMem (0-based).
-
- @retval - The page count for specific BaseMem Index
-
-**/
-UINT32
-NvmeGetBaseMemPages (
- IN UINTN BaseMemIndex
- )
-{
- UINT32 Pages;
- UINTN Index;
- UINT32 PageSizeList[8];
-
- PageSizeList[0] = 1; /* Controller Data */
- PageSizeList[1] = 1; /* Identify Data */
- PageSizeList[2] = 1; /* ASQ */
- PageSizeList[3] = 1; /* ACQ */
- PageSizeList[4] = 1; /* SQs */
- PageSizeList[5] = 1; /* CQs */
- PageSizeList[6] = NVME_PRP_SIZE * NVME_CSQ_DEPTH; /* PRPs */
- PageSizeList[7] = 1; /* Security Commands */
-
- if (BaseMemIndex > MAX_BASEMEM_COUNT) {
- ASSERT (FALSE);
- return 0;
- }
-
- Pages = 0;
- for (Index = 0; Index < BaseMemIndex; Index++) {
- Pages += PageSizeList[Index];
- }
-
- return Pages;
-}
-
-/**
- Wait for NVME controller status to be ready or not.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] WaitReady - Flag for waitting status ready or not
-
- @return EFI_SUCCESS - Successfully to wait specific status.
- @return others - Fail to wait for specific controller status.
-
-**/
-STATIC
-EFI_STATUS
-NvmeWaitController (
- IN NVME_CONTEXT *Nvme,
- IN BOOLEAN WaitReady
- )
-{
- NVME_CSTS Csts;
- EFI_STATUS Status;
- UINT32 Index;
- UINT8 Timeout;
-
- //
- // Cap.To specifies max delay time in 500ms increments for Csts.Rdy to set after
- // Cc.Enable. Loop produces a 1 millisecond delay per itteration, up to 500 * Cap.To.
- //
- if (Nvme->Cap.To == 0) {
- Timeout = 1;
- } else {
- Timeout = Nvme->Cap.To;
- }
-
- Status = EFI_SUCCESS;
- for(Index = (Timeout * 500); Index != 0; --Index) {
- MicroSecondDelay (1000);
-
- //
- // Check if the controller is initialized
- //
- Status = NVME_GET_CSTS (Nvme, &Csts);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n", Status));
- return Status;
- }
-
- if ((BOOLEAN) Csts.Rdy == WaitReady) {
- break;
- }
- }
-
- if (Index == 0) {
- Status = EFI_TIMEOUT;
- }
-
- return Status;
-}
-
-/**
- Disable the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully disable the controller.
- @return others - Fail to disable the controller.
-
-**/
-STATIC
-EFI_STATUS
-NvmeDisableController (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVME_CC Cc;
- NVME_CSTS Csts;
- EFI_STATUS Status;
-
- Status = NVME_GET_CSTS (Nvme, &Csts);
-
- ///
- /// Read Controller Configuration Register.
- ///
- Status = NVME_GET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
- goto Done;
- }
-
- if (Cc.En == 1) {
- Cc.En = 0;
- ///
- /// Disable the controller.
- ///
- Status = NVME_SET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
- goto Done;
- }
- }
-
- Status = NvmeWaitController (Nvme, FALSE);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n", Status));
- goto Done;
- }
-
- return EFI_SUCCESS;
-
-Done:
- DEBUG ((DEBUG_INFO, "NvmeDisableController fail, Status: %r\n", Status));
- return Status;
-}
-
-/**
- Enable the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully enable the controller.
- @return EFI_DEVICE_ERROR - Fail to enable the controller.
- @return EFI_TIMEOUT - Fail to enable the controller in given time slot.
-
-**/
-STATIC
-EFI_STATUS
-NvmeEnableController (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVME_CC Cc;
- EFI_STATUS Status;
-
- //
- // Enable the controller
- //
- ZeroMem (&Cc, sizeof (NVME_CC));
- Cc.En = 1;
- Cc.Iosqes = 6;
- Cc.Iocqes = 4;
- Status = NVME_SET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
- goto Done;
- }
-
- Status = NvmeWaitController (Nvme, TRUE);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n", Status));
- goto Done;
- }
-
- return EFI_SUCCESS;
-
-Done:
- DEBUG ((DEBUG_INFO, "NvmeEnableController fail, Status: %r\n", Status));
- return Status;
-}
-
-/**
- Shutdown the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully shutdown the controller.
- @return EFI_DEVICE_ERROR - Fail to shutdown the controller.
- @return EFI_TIMEOUT - Fail to shutdown the controller in given time slot.
-
-**/
-STATIC
-EFI_STATUS
-NvmeShutdownController (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVME_CC Cc;
- NVME_CSTS Csts;
- EFI_STATUS Status;
- UINT32 Index;
- UINTN Timeout;
-
- Status = NVME_GET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
- return Status;
- }
-
- Cc.Shn = 1; // Normal shutdown
-
- Status = NVME_SET_CC (Nvme, &Cc);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
- return Status;
- }
-
- Timeout = NVME_GENERIC_TIMEOUT/1000; // ms
- for(Index = (UINT32)(Timeout); Index != 0; --Index) {
- MicroSecondDelay (1000);
-
- Status = NVME_GET_CSTS (Nvme, &Csts);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n", Status));
- return Status;
- }
-
- if (Csts.Shst == 2) { // Shutdown processing complete
- break;
- }
- }
-
- if (Index == 0) {
- Status = EFI_TIMEOUT;
- }
-
- return Status;
-}
-
-/**
- Check the execution status from a given completion queue entry.
-
- @param[in] Cq - A pointer to the NVME_CQ item.
-
-**/
-EFI_STATUS
-NvmeCheckCqStatus (
- IN NVME_CQ *Cq
- )
-{
- if (Cq->Sct == 0x0 && Cq->Sc == 0x0) {
- return EFI_SUCCESS;
- }
-
- DEBUG ((DEBUG_INFO, "Dump NVMe Completion Entry Status from [0x%x]:\n", (UINTN)Cq));
- DEBUG ((DEBUG_INFO, " SQ Identifier : [0x%x], Phase Tag : [%d], Cmd Identifier : [0x%x]\n", Cq->Sqid, Cq->Pt, Cq->Cid));
- DEBUG ((DEBUG_INFO, " NVMe Cmd Execution Result - "));
-
- switch (Cq->Sct) {
- case 0x0:
- switch (Cq->Sc) {
- case 0x0:
- DEBUG ((DEBUG_INFO, "Successful Completion\n"));
- return EFI_SUCCESS;
- case 0x1:
- DEBUG ((DEBUG_INFO, "Invalid Command Opcode\n"));
- break;
- case 0x2:
- DEBUG ((DEBUG_INFO, "Invalid Field in Command\n"));
- break;
- case 0x3:
- DEBUG ((DEBUG_INFO, "Command ID Conflict\n"));
- break;
- case 0x4:
- DEBUG ((DEBUG_INFO, "Data Transfer Error\n"));
- break;
- case 0x5:
- DEBUG ((DEBUG_INFO, "Commands Aborted due to Power Loss Notification\n"));
- break;
- case 0x6:
- DEBUG ((DEBUG_INFO, "Internal Device Error\n"));
- break;
- case 0x7:
- DEBUG ((DEBUG_INFO, "Command Abort Requested\n"));
- break;
- case 0x8:
- DEBUG ((DEBUG_INFO, "Command Aborted due to SQ Deletion\n"));
- break;
- case 0x9:
- DEBUG ((DEBUG_INFO, "Command Aborted due to Failed Fused Command\n"));
- break;
- case 0xA:
- DEBUG ((DEBUG_INFO, "Command Aborted due to Missing Fused Command\n"));
- break;
- case 0xB:
- DEBUG ((DEBUG_INFO, "Invalid Namespace or Format\n"));
- break;
- case 0xC:
- DEBUG ((DEBUG_INFO, "Command Sequence Error\n"));
- break;
- case 0xD:
- DEBUG ((DEBUG_INFO, "Invalid SGL Last Segment Descriptor\n"));
- break;
- case 0xE:
- DEBUG ((DEBUG_INFO, "Invalid Number of SGL Descriptors\n"));
- break;
- case 0xF:
- DEBUG ((DEBUG_INFO, "Data SGL Length Invalid\n"));
- break;
- case 0x10:
- DEBUG ((DEBUG_INFO, "Metadata SGL Length Invalid\n"));
- break;
- case 0x11:
- DEBUG ((DEBUG_INFO, "SGL Descriptor Type Invalid\n"));
- break;
- case 0x80:
- DEBUG ((DEBUG_INFO, "LBA Out of Range\n"));
- break;
- case 0x81:
- DEBUG ((DEBUG_INFO, "Capacity Exceeded\n"));
- break;
- case 0x82:
- DEBUG ((DEBUG_INFO, "Namespace Not Ready\n"));
- break;
- case 0x83:
- DEBUG ((DEBUG_INFO, "Reservation Conflict\n"));
- break;
- }
- break;
-
- case 0x1:
- switch (Cq->Sc) {
- case 0x0:
- DEBUG ((DEBUG_INFO, "Completion Queue Invalid\n"));
- break;
- case 0x1:
- DEBUG ((DEBUG_INFO, "Invalid Queue Identifier\n"));
- break;
- case 0x2:
- DEBUG ((DEBUG_INFO, "Maximum Queue Size Exceeded\n"));
- break;
- case 0x3:
- DEBUG ((DEBUG_INFO, "Abort Command Limit Exceeded\n"));
- break;
- case 0x5:
- DEBUG ((DEBUG_INFO, "Asynchronous Event Request Limit Exceeded\n"));
- break;
- case 0x6:
- DEBUG ((DEBUG_INFO, "Invalid Firmware Slot\n"));
- break;
- case 0x7:
- DEBUG ((DEBUG_INFO, "Invalid Firmware Image\n"));
- break;
- case 0x8:
- DEBUG ((DEBUG_INFO, "Invalid Interrupt Vector\n"));
- break;
- case 0x9:
- DEBUG ((DEBUG_INFO, "Invalid Log Page\n"));
- break;
- case 0xA:
- DEBUG ((DEBUG_INFO, "Invalid Format\n"));
- break;
- case 0xB:
- DEBUG ((DEBUG_INFO, "Firmware Application Requires Conventional Reset\n"));
- break;
- case 0xC:
- DEBUG ((DEBUG_INFO, "Invalid Queue Deletion\n"));
- break;
- case 0xD:
- DEBUG ((DEBUG_INFO, "Feature Identifier Not Saveable\n"));
- break;
- case 0xE:
- DEBUG ((DEBUG_INFO, "Feature Not Changeable\n"));
- break;
- case 0xF:
- DEBUG ((DEBUG_INFO, "Feature Not Namespace Specific\n"));
- break;
- case 0x10:
- DEBUG ((DEBUG_INFO, "Firmware Application Requires NVM Subsystem Reset\n"));
- break;
- case 0x80:
- DEBUG ((DEBUG_INFO, "Conflicting Attributes\n"));
- break;
- case 0x81:
- DEBUG ((DEBUG_INFO, "Invalid Protection Information\n"));
- break;
- case 0x82:
- DEBUG ((DEBUG_INFO, "Attempted Write to Read Only Range\n"));
- break;
- }
- break;
-
- case 0x2:
- switch (Cq->Sc) {
- case 0x80:
- DEBUG ((DEBUG_INFO, "Write Fault\n"));
- break;
- case 0x81:
- DEBUG ((DEBUG_INFO, "Unrecovered Read Error\n"));
- break;
- case 0x82:
- DEBUG ((DEBUG_INFO, "End-to-end Guard Check Error\n"));
- break;
- case 0x83:
- DEBUG ((DEBUG_INFO, "End-to-end Application Tag Check Error\n"));
- break;
- case 0x84:
- DEBUG ((DEBUG_INFO, "End-to-end Reference Tag Check Error\n"));
- break;
- case 0x85:
- DEBUG ((DEBUG_INFO, "Compare Failure\n"));
- break;
- case 0x86:
- DEBUG ((DEBUG_INFO, "Access Denied\n"));
- break;
- }
- break;
-
- default:
- DEBUG ((DEBUG_INFO, "Unknown error\n"));
- break;
- }
-
- return EFI_DEVICE_ERROR;
-}
-
-/**
- Create PRP lists for Data transfer which is larger than 2 memory pages.
- Note here we calcuate the number of required PRP lists and allocate them at one time.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] SqId - The SQ index for this PRP
- @param[in] PhysicalAddr - The physical base address of Data Buffer.
- @param[in] Pages - The number of pages to be transfered.
- @param[out] PrpListHost - The host base address of PRP lists.
- @param[in,out] PrpListNo - The number of PRP List.
-
- @retval The pointer Value to the first PRP List of the PRP lists.
-
-**/
-STATIC
-UINT64
-NvmeCreatePrpList (
- IN NVME_CONTEXT *Nvme,
- IN UINT16 SqId,
- IN EFI_PHYSICAL_ADDRESS PhysicalAddr,
- IN UINTN Pages,
- OUT VOID **PrpListHost,
- IN OUT UINTN *PrpListNo
- )
-{
- UINTN PrpEntryNo;
- UINT64 PrpListBase;
- UINTN PrpListIndex;
- UINTN PrpEntryIndex;
- UINT64 Remainder;
- EFI_PHYSICAL_ADDRESS PrpListPhyAddr;
- UINTN Bytes;
- UINT8 *PrpEntry;
- EFI_PHYSICAL_ADDRESS NewPhyAddr;
-
- ///
- /// The number of Prp Entry in a memory page.
- ///
- PrpEntryNo = EFI_PAGE_SIZE / sizeof (UINT64);
-
- ///
- /// Calculate total PrpList number.
- ///
- *PrpListNo = (UINTN) DivU64x64Remainder ((UINT64)Pages, (UINT64)PrpEntryNo, &Remainder);
- if (Remainder != 0) {
- *PrpListNo += 1;
- }
-
- if (*PrpListNo > NVME_PRP_SIZE) {
- DEBUG ((DEBUG_INFO, "NvmeCreatePrpList (PhysicalAddr: %lx, Pages: %x) PrpEntryNo: %x\n",
- PhysicalAddr, Pages, PrpEntryNo));
- DEBUG ((DEBUG_INFO, "*PrpListNo: %x, Remainder: %lx", *PrpListNo, Remainder));
- ASSERT (FALSE);
- }
- *PrpListHost = (VOID *)(UINTN) NVME_PRP_BASE (Nvme, SqId);
-
- Bytes = EFI_PAGES_TO_SIZE (*PrpListNo);
- PrpListPhyAddr = (UINT64)(UINTN)(*PrpListHost);
-
- ///
- /// Fill all PRP lists except of last one.
- ///
- ZeroMem (*PrpListHost, Bytes);
- for (PrpListIndex = 0; PrpListIndex < *PrpListNo - 1; ++PrpListIndex) {
- PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
-
- for (PrpEntryIndex = 0; PrpEntryIndex < PrpEntryNo; ++PrpEntryIndex) {
- PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex * sizeof(UINT64));
- if (PrpEntryIndex != PrpEntryNo - 1) {
- ///
- /// Fill all PRP entries except of last one.
- ///
- CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof (UINT64));
- PhysicalAddr += EFI_PAGE_SIZE;
- } else {
- ///
- /// Fill last PRP entries with next PRP List pointer.
- ///
- NewPhyAddr = (PrpListPhyAddr + (PrpListIndex + 1) * EFI_PAGE_SIZE);
- CopyMem (PrpEntry, (VOID *)(UINTN) (&NewPhyAddr), sizeof (UINT64));
- }
- }
- }
-
- ///
- /// Fill last PRP list.
- ///
- PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
- for (PrpEntryIndex = 0; PrpEntryIndex < ((Remainder != 0) ? Remainder : PrpEntryNo); ++PrpEntryIndex) {
- PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex * sizeof(UINT64));
- CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof (UINT64));
-
- PhysicalAddr += EFI_PAGE_SIZE;
- }
-
- return PrpListPhyAddr;
-}
-
-/**
- Check whether there are available command slots.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Qid - Queue index
-
- @retval EFI_SUCCESS - Available command slot is found
- @retval EFI_NOT_READY - No available command slot is found
- @retval EFI_DEVICE_ERROR - Error occurred on device side.
-
-**/
-EFI_STATUS
-NvmeHasFreeCmdSlot (
- IN NVME_CONTEXT *Nvme,
- IN UINT8 Qid
- )
-{
- return TRUE;
-}
-
-/**
- Check whether all command slots are clean.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Qid - Queue index
-
- @retval EFI_SUCCESS - All command slots are clean
- @retval EFI_NOT_READY - Not all command slots are clean
- @retval EFI_DEVICE_ERROR - Error occurred on device side.
-
-**/
-EFI_STATUS
-NvmeIsAllCmdSlotClean (
- IN NVME_CONTEXT *Nvme,
- IN UINT8 Qid
- )
-{
- return EFI_SUCCESS;
-}
-
-/**
- Waits until all NVME commands completed.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Qid - Queue index
-
- @retval EFI_SUCCESS - All NVME commands have completed
- @retval EFI_TIMEOUT - Timeout occured
- @retval EFI_NOT_READY - Not all NVME commands have completed
- @retval others - Error occurred on device side.
-**/
-EFI_STATUS
-NvmeWaitAllComplete (
- IN NVME_CONTEXT *Nvme,
- IN UINT8 Qid
- )
-{
- return EFI_SUCCESS;
-}
-
-/**
- Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports
- both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the nonblocking
- I/O functionality is optional.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] NamespaceId - Is a 32 bit Namespace ID to which the Express HCI command packet will be sent.
- A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
- ID specifies that the command packet should be sent to all valid namespaces.
- @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to which the Express HCI command packet will be sent.
- A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
- UUID specifies that the command packet should be sent to all valid namespaces.
- @param[in,out] Packet - A pointer to the NVM Express HCI Command Packet to send to the NVMe namespace specified
- by NamespaceId.
-
- @retval EFI_SUCCESS - The NVM Express Command Packet was sent by the host. TransferLength bytes were transferred
- to, or from DataBuffer.
- @retval EFI_NOT_READY - The NVM Express Command Packet could not be sent because the controller is not ready. The caller
- may retry again later.
- @retval EFI_DEVICE_ERROR - A device error occurred while attempting to send the NVM Express Command Packet.
- @retval EFI_INVALID_PARAMETER - Namespace, or the contents of NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
- Express Command Packet was not sent, so no additional status information is available.
- @retval EFI_UNSUPPORTED - The command described by the NVM Express Command Packet is not supported by the host adapter.
- The NVM Express Command Packet was not sent, so no additional status information is available.
- @retval EFI_TIMEOUT - A timeout occurred while waiting for the NVM Express Command Packet to execute.
-
-**/
-EFI_STATUS
-NvmePassThru (
- IN NVME_CONTEXT *Nvme,
- IN UINT32 NamespaceId,
- IN UINT64 NamespaceUuid,
- IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
- )
-{
- EFI_STATUS Status;
- NVME_SQ *Sq;
- NVME_CQ *Cq;
- UINT8 Qid;
- UINT32 Bytes;
- UINT32 Offset;
- EFI_PHYSICAL_ADDRESS PhyAddr;
- VOID *PrpListHost;
- UINTN PrpListNo;
- UINT32 Timer;
- UINTN SqSize;
- UINTN CqSize;
-
- ///
- /// check the Data fields in Packet parameter.
- ///
- if ((Nvme == NULL) || (Packet == NULL)) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter: Nvme(%x)/Packet(%x)\n",
- (UINTN)Nvme, (UINTN)Packet));
- return EFI_INVALID_PARAMETER;
- }
-
- if ((Packet->NvmeCmd == NULL) || (Packet->NvmeResponse == NULL)) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter: NvmeCmd(%x)/NvmeResponse(%x)\n",
- (UINTN)Packet->NvmeCmd, (UINTN)Packet->NvmeResponse));
- return EFI_INVALID_PARAMETER;
- }
-
- if (Packet->QueueId != NVME_ADMIN_QUEUE && Packet->QueueId != NVME_IO_QUEUE) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter: QueueId(%x)\n",
- Packet->QueueId));
- return EFI_INVALID_PARAMETER;
- }
-
- PrpListHost = NULL;
- PrpListNo = 0;
- Status = EFI_SUCCESS;
-
- Qid = Packet->QueueId;
- Sq = Nvme->SqBuffer[Qid] + Nvme->SqTdbl[Qid].Sqt;
- Cq = Nvme->CqBuffer[Qid] + Nvme->CqHdbl[Qid].Cqh;
- if (Qid == NVME_ADMIN_QUEUE) {
- SqSize = NVME_ASQ_SIZE + 1;
- CqSize = NVME_ACQ_SIZE + 1;
- } else {
- SqSize = NVME_CSQ_DEPTH;
- CqSize = NVME_CCQ_DEPTH;
- }
-
- if (Packet->NvmeCmd->Nsid != NamespaceId) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru: Nsid mismatch (%x, %x)\n",
- Packet->NvmeCmd->Nsid, NamespaceId));
- return EFI_INVALID_PARAMETER;
- }
-
- ZeroMem (Sq, sizeof (NVME_SQ));
- Sq->Opc = Packet->NvmeCmd->Cdw0.Opcode;
- Sq->Fuse = Packet->NvmeCmd->Cdw0.FusedOperation;
- Sq->Cid = Packet->NvmeCmd->Cdw0.Cid;
- Sq->Nsid = Packet->NvmeCmd->Nsid;
-
- ///
- /// Currently we only support PRP for Data transfer, SGL is NOT supported.
- ///
- ASSERT (Sq->Psdt == 0);
- if (Sq->Psdt != 0) {
- DEBUG ((DEBUG_ERROR, "NvmePassThru: doesn't support SGL mechanism\n"));
- return EFI_UNSUPPORTED;
- }
-
- Sq->Prp[0] = Packet->TransferBuffer;
- Sq->Prp[1] = 0;
-
- if(Packet->MetadataBuffer != (UINT64)(UINTN)NULL) {
- Sq->Mptr = Packet->MetadataBuffer;
- }
-
- ///
- /// If the Buffer Size spans more than two memory pages (page Size as defined in CC.Mps),
- /// then build a PRP list in the second PRP submission queue entry.
- ///
- Offset = ((UINT32)Sq->Prp[0]) & (EFI_PAGE_SIZE - 1);
- Bytes = Packet->TransferLength;
-
- if ((Offset + Bytes) > (EFI_PAGE_SIZE * 2)) {
- ///
- /// Create PrpList for remaining Data Buffer.
- ///
- PhyAddr = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
- Sq->Prp[1] = NvmeCreatePrpList (Nvme, Nvme->SqTdbl[Qid].Sqt, PhyAddr, EFI_SIZE_TO_PAGES(Offset + Bytes) - 1, &PrpListHost, &PrpListNo);
- if (Sq->Prp[1] == 0) {
- Status = EFI_OUT_OF_RESOURCES;
- DEBUG ((DEBUG_ERROR, "NvmeCreatePrpList fail, Status: %r\n", Status));
- goto EXIT;
- }
-
- } else if ((Offset + Bytes) > EFI_PAGE_SIZE) {
- Sq->Prp[1] = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
- }
-
- if(Packet->NvmeCmd->Flags & CDW10_VALID) {
- Sq->Payload.Raw.Cdw10 = Packet->NvmeCmd->Cdw10;
- }
- if(Packet->NvmeCmd->Flags & CDW11_VALID) {
- Sq->Payload.Raw.Cdw11 = Packet->NvmeCmd->Cdw11;
- }
- if(Packet->NvmeCmd->Flags & CDW12_VALID) {
- Sq->Payload.Raw.Cdw12 = Packet->NvmeCmd->Cdw12;
- }
- if(Packet->NvmeCmd->Flags & CDW13_VALID) {
- Sq->Payload.Raw.Cdw13 = Packet->NvmeCmd->Cdw13;
- }
- if(Packet->NvmeCmd->Flags & CDW14_VALID) {
- Sq->Payload.Raw.Cdw14 = Packet->NvmeCmd->Cdw14;
- }
- if(Packet->NvmeCmd->Flags & CDW15_VALID) {
- Sq->Payload.Raw.Cdw15 = Packet->NvmeCmd->Cdw15;
- }
-
- ///
- /// Ring the submission queue doorbell.
- ///
- Nvme->SqTdbl[Qid].Sqt++;
- if(Nvme->SqTdbl[Qid].Sqt == SqSize) {
- Nvme->SqTdbl[Qid].Sqt = 0;
- }
- Status = NVME_SET_SQTDBL (Nvme, Qid, &Nvme->SqTdbl[Qid]);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_SET_SQTDBL fail, Status: %r\n", Status));
- goto EXIT;
- }
-
- ///
- /// Wait for completion queue to get filled in.
- ///
- Status = EFI_TIMEOUT;
- Timer = 0;
- while (Timer < NVME_CMD_TIMEOUT) {
- //DEBUG ((DEBUG_VERBOSE, "Timer: %x, Cq:\n", Timer));
- //DumpMem (Cq, sizeof (NVME_CQ));
- if (Cq->Pt != Nvme->Pt[Qid]) {
- Status = EFI_SUCCESS;
- break;
- }
-
- MicroSecondDelay (NVME_CMD_WAIT);
- Timer += NVME_CMD_WAIT;
- }
-
- Nvme->CqHdbl[Qid].Cqh++;
- if (Nvme->CqHdbl[Qid].Cqh == CqSize) {
- Nvme->CqHdbl[Qid].Cqh = 0;
- Nvme->Pt[Qid] ^= 1;
- }
-
- ///
- /// Copy the Respose Queue entry for this command to the callers response Buffer
- ///
- CopyMem (Packet->NvmeResponse, Cq, sizeof(NVM_EXPRESS_RESPONSE));
-
- if (!EFI_ERROR(Status)) { // We still need to check CQ status if no timeout error occured
- Status = NvmeCheckCqStatus (Cq);
- }
- NVME_SET_CQHDBL (Nvme, Qid, &Nvme->CqHdbl[Qid]);
-
-EXIT:
- return Status;
-}
-
-/**
- Get identify controller Data.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Buffer - The Buffer used to store the identify controller Data.
-
- @return EFI_SUCCESS - Successfully get the identify controller Data.
- @return others - Fail to get the identify controller Data.
-
-**/
-STATIC
-EFI_STATUS
-NvmeIdentifyController (
- IN NVME_CONTEXT *Nvme,
- IN VOID *Buffer
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
-
- Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- //
- // According to Nvm Express 1.1 spec Figure 38, When not used, the field shall be cleared to 0h.
- // For the Identify command, the Namespace Identifier is only used for the Namespace Data structure.
- //
- Command.Nsid = 0;
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
- CommandPacket.TransferLength = sizeof (NVME_ADMIN_CONTROLLER_DATA);
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
- //
- // Set bit 0 (Cns bit) to 1 to identify a controller
- //
- Command.Cdw10 = 1;
- Command.Flags = CDW10_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Get specified identify namespace Data.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] NamespaceId - The specified namespace identifier.
- @param[in] Buffer - The Buffer used to store the identify namespace Data.
-
- @return EFI_SUCCESS - Successfully get the identify namespace Data.
- @return others - Fail to get the identify namespace Data.
-
-**/
-STATIC
-EFI_STATUS
-NvmeIdentifyNamespace (
- IN NVME_CONTEXT *Nvme,
- IN UINT32 NamespaceId,
- IN VOID *Buffer
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- Command.Nsid = NamespaceId;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
- CommandPacket.TransferLength = sizeof (NVME_ADMIN_NAMESPACE_DATA);
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
- //
- // Set bit 0 (Cns bit) to 1 to identify a namespace
- //
- CommandPacket.NvmeCmd->Cdw10 = 0;
- CommandPacket.NvmeCmd->Flags = CDW10_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NamespaceId,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Get Block Size for specific namespace of NVME.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return - Block Size in bytes
-
-**/
-STATIC
-UINT32
-NvmeGetBlockSize (
- IN NVME_CONTEXT *Nvme
- )
-{
- UINT32 BlockSize;
- UINT32 Lbads;
- UINT32 Flbas;
- UINT32 LbaFmtIdx;
-
- Flbas = Nvme->NamespaceData->Flbas;
- LbaFmtIdx = Flbas & 3;
- Lbads = Nvme->NamespaceData->LbaFormat[LbaFmtIdx].Lbads;
-
- BlockSize = (UINT32)1 << Lbads;
- return BlockSize;
-}
-
-/**
- Get last LBA for specific namespace of NVME.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return - Last LBA address
-
-**/
-STATIC
-EFI_LBA
-NvmeGetLastLba (
- IN NVME_CONTEXT *Nvme
- )
-{
- EFI_LBA LastBlock;
- LastBlock = Nvme->NamespaceData->Nsze - 1;
- return LastBlock;
-}
-
-/**
- Create io completion queue.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully create io completion queue.
- @return others - Fail to create io completion queue.
-
-**/
-STATIC
-EFI_STATUS
-NvmeCreateIoCompletionQueue (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_CRIOCQ CrIoCq;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&CrIoCq, sizeof(NVME_ADMIN_CRIOCQ));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_CRIOCQ_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
- CommandPacket.TransferLength = EFI_PAGE_SIZE;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- CrIoCq.Qid = NVME_IO_QUEUE;
- CrIoCq.Qsize = NVME_CCQ_SIZE;
- CrIoCq.Pc = 1;
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoCq, sizeof (NVME_ADMIN_CRIOCQ));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Create io submission queue.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully create io submission queue.
- @return others - Fail to create io submission queue.
-
-**/
-STATIC
-EFI_STATUS
-NvmeCreateIoSubmissionQueue (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_CRIOSQ CrIoSq;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&CrIoSq, sizeof(NVME_ADMIN_CRIOSQ));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_CRIOSQ_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
- CommandPacket.TransferLength = EFI_PAGE_SIZE;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- CrIoSq.Qid = NVME_IO_QUEUE;
- CrIoSq.Qsize = NVME_CSQ_SIZE;
- CrIoSq.Pc = 1;
- CrIoSq.Cqid = NVME_IO_QUEUE;
- CrIoSq.Qprio = 0;
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoSq, sizeof (NVME_ADMIN_CRIOSQ));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Security send and receive commands.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] SendCommand - The flag to indicate the command type, TRUE for Send command and FALSE for receive command
- @param[in] SecurityProtocol - Security Protocol
- @param[in] SpSpecific - Security Protocol Specific
- @param[in] TransferLength - Transfer Length of Buffer (in bytes) - always a multiple of 512
- @param[in,out] TransferBuffer - Address of Data to transfer
-
- @return EFI_SUCCESS - Successfully create io submission queue.
- @return others - Fail to send/receive commands.
-
-**/
-EFI_STATUS
-NvmeSecuritySendReceive (
- IN NVME_CONTEXT *Nvme,
- IN BOOLEAN SendCommand,
- IN UINT8 SecurityProtocol,
- IN UINT16 SpSpecific,
- IN UINTN TransferLength,
- IN OUT VOID *TransferBuffer
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_SECSEND SecSend;
- OACS *Oacs;
- UINT8 Opcode;
- VOID* *SecBuff;
-
- Oacs = (OACS *)&Nvme->ControllerData->Oacs;
-
- //
- // Verify security bit for Security Send/Receive commands
- //
- if (Oacs->Security == 0) {
- DEBUG ((DEBUG_ERROR, "Security command doesn't support.\n"));
- return EFI_NOT_READY;
- }
-
- SecBuff = (VOID *)(UINTN) NVME_SEC_BASE (Nvme);
-
- //
- // Actions for sending security command
- //
- if (SendCommand) {
- CopyMem (SecBuff, TransferBuffer, TransferLength);
- }
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&SecSend, sizeof(NVME_ADMIN_SECSEND));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Opcode = (UINT8)(SendCommand ? NVME_ADMIN_SECURITY_SEND_OPC : NVME_ADMIN_SECURITY_RECV_OPC);
- Command.Cdw0.Opcode = Opcode;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)SecBuff;
- CommandPacket.TransferLength = (UINT32)TransferLength;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- SecSend.Spsp = SpSpecific;
- SecSend.Secp = SecurityProtocol;
- SecSend.Tl = (UINT32)TransferLength;
-
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &SecSend, sizeof (NVME_ADMIN_SECSEND));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- //
- // Actions for receiving security command
- //
- if (!SendCommand) {
- CopyMem (TransferBuffer, SecBuff, TransferLength);
- }
-
- return Status;
-}
-
-/**
- Destroy io completion queue.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully destroy io completion queue.
- @return others - Fail to destroy io completion queue.
-
-**/
-STATIC
-EFI_STATUS
-NvmeDestroyIoCompletionQueue (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_DEIOCQ DelIoCq;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&DelIoCq, sizeof(NVME_ADMIN_DEIOCQ));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_DELIOCQ_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
- CommandPacket.TransferLength = EFI_PAGE_SIZE;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- DelIoCq.Qid = NVME_IO_QUEUE;
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoCq, sizeof (NVME_ADMIN_DEIOCQ));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Destroy io submission queue.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @return EFI_SUCCESS - Successfully destroy io submission queue.
- @return others - Fail to destroy io submission queue.
-
-**/
-STATIC
-EFI_STATUS
-NvmeDestroyIoSubmissionQueue (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- NVME_ADMIN_DEIOSQ DelIoSq;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
- ZeroMem (&DelIoSq, sizeof(NVME_ADMIN_DEIOSQ));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- Command.Cdw0.Opcode = NVME_ADMIN_DELIOSQ_OPC;
- Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
- CommandPacket.TransferBuffer = (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
- CommandPacket.TransferLength = EFI_PAGE_SIZE;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_ADMIN_QUEUE;
-
- DelIoSq.Qid = NVME_IO_QUEUE;
- CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoSq, sizeof (NVME_ADMIN_DEIOSQ));
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
-
- Status = NvmePassThru (
- Nvme,
- NVME_CONTROLLER_ID,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Allocate transfer-related Data struct which is used at Nvme.
-
- @param[in] ImageHandle Image handle for this driver image
- @param[in] Nvme The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_OUT_OF_RESOURCE The allocation is failure.
- @retval EFI_SUCCESS Successful to allocate memory.
-
-**/
-EFI_STATUS
-EFIAPI
-NvmeAllocateResource (
- IN EFI_HANDLE ImageHandle,
- IN NVME_CONTEXT *Nvme
- )
-{
- EFI_STATUS Status;
- EFI_PHYSICAL_ADDRESS Addr;
- UINT32 Size;
-
- //
- // Allocate resources required by NVMe host controller.
- //
- // NBAR
- Size = 0x10000;
- Addr = 0xFFFFFFFF;
- Status = gDS->AllocateMemorySpace (
- EfiGcdAllocateMaxAddressSearchBottomUp,
- EfiGcdMemoryTypeMemoryMappedIo,
- 15, // 2^15: 32K Alignment
- Size,
- &Addr,
- ImageHandle,
- NULL
- );
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
- Nvme->Nbar = (UINT32) Addr;
-
- // DMA Buffer
- Size = NVME_MEM_MAX_SIZE;
- Addr = 0xFFFFFFFF;
- Status = gBS->AllocatePages (
- AllocateMaxAddress,
- EfiACPIMemoryNVS,
- EFI_SIZE_TO_PAGES (Size),
- (EFI_PHYSICAL_ADDRESS *)&Addr
- );
- if (EFI_ERROR (Status)) {
- return EFI_OUT_OF_RESOURCES;
- }
- Nvme->BaseMem = (UINT32) Addr;
-
- // Clean up DMA Buffer before using
- ZeroMem ((VOID *)(UINTN)Addr, NVME_MEM_MAX_SIZE);
-
- return EFI_SUCCESS;
-}
-
-/**
- Free allocated transfer-related Data struct which is used at NVMe.
-
- @param[in] Nvme The pointer to the NVME_CONTEXT Data structure.
-
-**/
-VOID
-EFIAPI
-NvmeFreeResource (
- IN NVME_CONTEXT *Nvme
- )
-{
- UINT32 Size;
-
- // NBAR
- if (Nvme->BaseMem != 0) {
- Size = 0x10000;
- gDS->FreeMemorySpace (Nvme->Nbar, Size);
- }
-
- // DMA Buffer
- if (Nvme->Nbar != 0) {
- Size = NVME_MEM_MAX_SIZE;
- gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN) Nvme->Nbar, EFI_SIZE_TO_PAGES (Size));
- }
-}
-
-
-/**
- Initialize the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - The NVM Express Controller is initialized successfully.
- @retval Others - A device error occurred while initializing the controller.
-
-**/
-EFI_STATUS
-NvmeControllerInit (
- IN NVME_CONTEXT *Nvme
- )
-{
- EFI_STATUS Status;
- NVME_AQA Aqa;
- NVME_ASQ Asq;
- NVME_ACQ Acq;
- NVME_VER Ver;
-
- UINT32 MlBAR;
- UINT32 MuBAR;
-
- ///
- /// Update PCIE BAR0/1 for NVME device
- ///
- MlBAR = Nvme->Nbar;
- MuBAR = 0;
- PciWrite32 (Nvme->PciBase + 0x10, MlBAR); // MLBAR (BAR0)
- PciWrite32 (Nvme->PciBase + 0x14, MuBAR); // MUBAR (BAR1)
-
- ///
- /// Enable PCIE decode
- ///
- PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x6);
-
- // Version
- NVME_GET_VER (Nvme, &Ver);
- if (!(Ver.Mjr == 0x0001) && (Ver.Mnr == 0x0000)) {
- DEBUG ((DEBUG_INFO, "\n!!!\n!!! NVME Version mismatch for the implementation !!!\n!!!\n"));
- }
-
- ///
- /// Read the Controller Capabilities register and verify that the NVM command set is supported
- ///
- Status = NVME_GET_CAP (Nvme, &Nvme->Cap);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "NVME_GET_CAP fail, Status: %r\n", Status));
- goto Done;
- }
-
- if (Nvme->Cap.Css != 0x01) {
- DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: the controller doesn't support NVMe command set\n"));
- Status = EFI_UNSUPPORTED;
- goto Done;
- }
-
- ///
- /// Currently the driver only supports 4k page Size.
- ///
- if ((Nvme->Cap.Mpsmin + 12) > EFI_PAGE_SHIFT) {
- DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: only supports 4k page Size\n"));
- ASSERT (FALSE);
- Status = EFI_UNSUPPORTED;
- goto Done;
- }
-
- Nvme->Cid[0] = 0;
- Nvme->Cid[1] = 0;
-
- Nvme->Pt[0] = 0;
- Nvme->Pt[1] = 0;
-
- ZeroMem ((VOID *)(UINTN)(&(Nvme->SqTdbl[0])), sizeof (NVME_SQTDBL) * NVME_MAX_IO_QUEUES);
- ZeroMem ((VOID *)(UINTN)(&(Nvme->CqHdbl[0])), sizeof (NVME_CQHDBL) * NVME_MAX_IO_QUEUES);
-
- ZeroMem ((VOID *)(UINTN)Nvme->BaseMem, NVME_MEM_MAX_SIZE);
-
- Status = NvmeDisableController (Nvme);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeDisableController fail, Status: %r\n", Status));
- goto Done;
- }
-
- ///
- /// set number of entries admin submission & completion queues.
- ///
- Aqa.Asqs = NVME_ASQ_SIZE;
- Aqa.Rsvd1 = 0;
- Aqa.Acqs = NVME_ACQ_SIZE;
- Aqa.Rsvd2 = 0;
-
- ///
- /// Address of admin submission queue.
- ///
- Asq = (UINT64)(UINTN)(NVME_ASQ_BASE (Nvme) & ~0xFFF);
-
- ///
- /// Address of admin completion queue.
- ///
- Acq = (UINT64)(UINTN)(NVME_ACQ_BASE (Nvme) & ~0xFFF);
-
- ///
- /// Address of I/O submission & completion queue.
- ///
- Nvme->SqBuffer[0] = (NVME_SQ *)(UINTN)NVME_ASQ_BASE (Nvme); // NVME_ADMIN_QUEUE
- Nvme->CqBuffer[0] = (NVME_CQ *)(UINTN)NVME_ACQ_BASE (Nvme); // NVME_ADMIN_QUEUE
- Nvme->SqBuffer[1] = (NVME_SQ *)(UINTN)NVME_SQ_BASE (Nvme, 0); // NVME_IO_QUEUE
- Nvme->CqBuffer[1] = (NVME_CQ *)(UINTN)NVME_CQ_BASE (Nvme, 0); // NVME_IO_QUEUE
-
- DEBUG ((DEBUG_INFO, "BaseMem = [%08X]\n", Nvme->BaseMem));
- DEBUG ((DEBUG_INFO, "Admin Submission Queue Size (Aqa.Asqs) = [%08X]\n", Aqa.Asqs));
- DEBUG ((DEBUG_INFO, "Admin Completion Queue Size (Aqa.Acqs) = [%08X]\n", Aqa.Acqs));
- DEBUG ((DEBUG_INFO, "Admin Submission Queue (SqBuffer[0]) = [%08X]\n", Nvme->SqBuffer[0]));
- DEBUG ((DEBUG_INFO, "Admin Completion Queue (CqBuffer[0]) = [%08X]\n", Nvme->CqBuffer[0]));
- DEBUG ((DEBUG_INFO, "I/O Submission Queue (SqBuffer[1]) = [%08X]\n", Nvme->SqBuffer[1]));
- DEBUG ((DEBUG_INFO, "I/O Completion Queue (CqBuffer[1]) = [%08X]\n", Nvme->CqBuffer[1]));
-
- ///
- /// Program admin queue attributes.
- ///
- Status = NVME_SET_AQA (Nvme, &Aqa);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Program admin submission queue address.
- ///
- Status = NVME_SET_ASQ (Nvme, &Asq);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Program admin completion queue address.
- ///
- Status = NVME_SET_ACQ (Nvme, &Acq);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- Status = NvmeEnableController (Nvme);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Create one I/O completion queue.
- ///
- Status = NvmeCreateIoCompletionQueue (Nvme);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Create one I/O Submission queue.
- ///
- Status = NvmeCreateIoSubmissionQueue (Nvme);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Get current Identify Controller Data
- ///
- Nvme->ControllerData = (NVME_ADMIN_CONTROLLER_DATA *)(UINTN) NVME_CONTROL_DATA_BASE (Nvme);
- Status = NvmeIdentifyController (Nvme, Nvme->ControllerData);
- if (EFI_ERROR(Status)) {
- goto Done;
- }
-
- ///
- /// Dump NvmExpress Identify Controller Data
- ///
- Nvme->ControllerData->Sn[19] = 0;
- Nvme->ControllerData->Mn[39] = 0;
- //NvmeDumpIdentifyController (Nvme->ControllerData);
-
- ///
- /// Get current Identify Namespace Data
- ///
- Nvme->NamespaceData = (NVME_ADMIN_NAMESPACE_DATA *)NVME_NAMESPACE_DATA_BASE (Nvme);
- Status = NvmeIdentifyNamespace (Nvme, Nvme->Nsid, Nvme->NamespaceData);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeIdentifyNamespace fail, Status = %r\n", Status));
- goto Done;
- }
-
- ///
- /// Dump NvmExpress Identify Namespace Data
- ///
- if (Nvme->NamespaceData->Ncap == 0) {
- DEBUG ((DEBUG_ERROR, "Invalid Namespace, Ncap: %lx\n", Nvme->NamespaceData->Ncap));
- Status = EFI_DEVICE_ERROR;
- goto Done;
- }
-
- Nvme->BlockSize = NvmeGetBlockSize (Nvme);
- Nvme->LastBlock = NvmeGetLastLba (Nvme);
-
- Nvme->State = NvmeStatusInit;
-
- return EFI_SUCCESS;
-
-Done:
- return Status;
-}
-
-/**
- Un-initialize the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - The NVM Express Controller is un-initialized successfully.
- @retval Others - A device error occurred while un-initializing the controller.
-
-**/
-EFI_STATUS
-NvmeControllerExit (
- IN NVME_CONTEXT *Nvme
- )
-{
- EFI_STATUS Status;
-
- Status = EFI_SUCCESS;
- if (Nvme->State == NvmeStatusInit || Nvme->State == NvmeStatusMax) {
- ///
- /// Destroy I/O Submission queue.
- ///
- Status = NvmeDestroyIoSubmissionQueue (Nvme);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeDestroyIoSubmissionQueue fail, Status = %r\n", Status));
- return Status;
- }
-
- ///
- /// Destroy I/O completion queue.
- ///
- Status = NvmeDestroyIoCompletionQueue (Nvme);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeDestroyIoCompletionQueue fail, Status = %r\n", Status));
- return Status;
- }
-
- Status = NvmeShutdownController (Nvme);
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeShutdownController fail, Status: %r\n", Status));
- }
- }
-
- ///
- /// Disable PCIE decode
- ///
- PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x0);
- PciWrite32 (Nvme->PciBase + 0x10, 0); // MLBAR (BAR0)
- PciWrite32 (Nvme->PciBase + 0x14, 0); // MUBAR (BAR1)
-
- Nvme->State = NvmeStatusUnknown;
- return Status;
-}
-
-/**
- Read sector Data from the NVMe device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in,out] Buffer - The Buffer used to store the Data read from the device.
- @param[in] Lba - The start block number.
- @param[in] Blocks - Total block number to be read.
-
- @retval EFI_SUCCESS - Datum are read from the device.
- @retval Others - Fail to read all the datum.
-
-**/
-EFI_STATUS
-NvmeReadSectors (
- IN NVME_CONTEXT *Nvme,
- IN OUT UINT64 Buffer,
- IN UINT64 Lba,
- IN UINT32 Blocks
- )
-{
- UINT32 Bytes;
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- UINT32 BlockSize;
-
- BlockSize = Nvme->BlockSize;
- Bytes = Blocks * BlockSize;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_READ_OPC;
- CommandPacket.NvmeCmd->Cdw0.Cid = Nvme->Cid[NVME_IO_QUEUE]++;
- CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
- CommandPacket.TransferBuffer = Buffer;
-
- CommandPacket.TransferLength = Bytes;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_IO_QUEUE;
-
- CommandPacket.NvmeCmd->Cdw10 = (UINT32)Lba;
- CommandPacket.NvmeCmd->Cdw11 = (UINT32)(RShiftU64 (Lba, 32));
- CommandPacket.NvmeCmd->Cdw12 = (Blocks - 1) & 0xFFFF;
-
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID | CDW12_VALID;
-
- Status = NvmePassThru (
- Nvme,
- Nvme->Nsid,
- 0,
- &CommandPacket
- );
-
- return Status;
-}
-
-/**
- Write sector Data to the NVMe device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Buffer - The Buffer to be written into the device.
- @param[in] Lba - The start block number.
- @param[in] Blocks - Total block number to be written.
-
- @retval EFI_SUCCESS - Datum are written into the Buffer.
- @retval Others - Fail to write all the datum.
-
-**/
-EFI_STATUS
-NvmeWriteSectors (
- IN NVME_CONTEXT *Nvme,
- IN UINT64 Buffer,
- IN UINT64 Lba,
- IN UINT32 Blocks
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
- UINT32 Bytes;
- UINT32 BlockSize;
-
- BlockSize = Nvme->BlockSize;
- Bytes = Blocks * BlockSize;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_WRITE_OPC;
- CommandPacket.NvmeCmd->Cdw0.Cid = Nvme->Cid[NVME_IO_QUEUE]++;
- CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
- CommandPacket.TransferBuffer = Buffer;
-
- CommandPacket.TransferLength = Bytes;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_IO_QUEUE;
-
- CommandPacket.NvmeCmd->Cdw10 = (UINT32)Lba;
- CommandPacket.NvmeCmd->Cdw11 = (UINT32)(RShiftU64 (Lba, 32));
- CommandPacket.NvmeCmd->Cdw12 = (Blocks - 1) & 0xFFFF;
-
- CommandPacket.MetadataBuffer = (UINT64)(UINTN)NULL;
- CommandPacket.MetadataLength = 0;
-
- CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID | CDW12_VALID;
-
- Status = NvmePassThru (
- Nvme,
- Nvme->Nsid,
- 0,
- &CommandPacket
- );
-
- return Status;
-}
-
-/**
- Flushes all modified Data to the device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - Datum are written into the Buffer.
- @retval Others - Fail to write all the datum.
-
-**/
-EFI_STATUS
-NvmeFlush (
- IN NVME_CONTEXT *Nvme
- )
-{
- NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
- NVM_EXPRESS_COMMAND Command;
- NVM_EXPRESS_RESPONSE Response;
- EFI_STATUS Status;
-
- ZeroMem (&CommandPacket, sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
- ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
- ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
-
- CommandPacket.NvmeCmd = &Command;
- CommandPacket.NvmeResponse = &Response;
-
- CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_FLUSH_OPC;
- CommandPacket.NvmeCmd->Cdw0.Cid = Nvme->Cid[NVME_IO_QUEUE]++;
- CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
- CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
- CommandPacket.QueueId = NVME_IO_QUEUE;
-
- Status = NvmePassThru (
- Nvme,
- Nvme->Nsid,
- 0,
- &CommandPacket
- );
- if (!EFI_ERROR (Status)) {
- Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
- }
-
- return Status;
-}
-
-/**
- Read some blocks from the device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[out] Buffer - The Buffer used to store the Data read from the device.
- @param[in] Lba - The start block number.
- @param[in] Blocks - Total block number to be read.
-
- @retval EFI_SUCCESS - Datum are read from the device.
- @retval Others - Fail to read all the datum.
-
-**/
-EFI_STATUS
-NvmeRead (
- IN NVME_CONTEXT *Nvme,
- OUT UINT64 Buffer,
- IN UINT64 Lba,
- IN UINTN Blocks
- )
-{
- EFI_STATUS Status;
- UINT32 BlockSize;
- UINT32 MaxTransferBlocks;
-
- ASSERT (Blocks <= NVME_MAX_SECTORS);
- Status = EFI_SUCCESS;
- BlockSize = Nvme->BlockSize;
- if (Nvme->ControllerData->Mdts != 0) {
- MaxTransferBlocks = (1 << (Nvme->ControllerData->Mdts)) * (1 << (Nvme->Cap.Mpsmin + 12)) / BlockSize;
- } else {
- MaxTransferBlocks = 1024;
- }
-
- while (Blocks > 0) {
- if (Blocks > MaxTransferBlocks) {
- Status = NvmeReadSectors (Nvme, Buffer, Lba, MaxTransferBlocks);
-
- Blocks -= MaxTransferBlocks;
- Buffer += (MaxTransferBlocks * BlockSize);
- Lba += MaxTransferBlocks;
- } else {
- Status = NvmeReadSectors (Nvme, Buffer, Lba, (UINT32) Blocks);
- Blocks = 0;
- }
-
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeRead fail, Status = %r\n", Status));
- break;
- }
- }
-
- return Status;
-}
-
-/**
- Write some blocks to the device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Buffer - The Buffer to be written into the device.
- @param[in] Lba - The start block number.
- @param[in] Blocks - Total block number to be written.
-
- @retval EFI_SUCCESS - Datum are written into the Buffer.
- @retval Others - Fail to write all the datum.
-
-**/
-EFI_STATUS
-NvmeWrite (
- IN NVME_CONTEXT *Nvme,
- IN UINT64 Buffer,
- IN UINT64 Lba,
- IN UINTN Blocks
- )
-{
- EFI_STATUS Status;
- UINT32 BlockSize;
- UINT32 MaxTransferBlocks;
-
- ASSERT (Blocks <= NVME_MAX_SECTORS);
- Status = EFI_SUCCESS;
- BlockSize = Nvme->BlockSize;
-
- if (Nvme->ControllerData->Mdts != 0) {
- MaxTransferBlocks = (1 << (Nvme->ControllerData->Mdts)) * (1 << (Nvme->Cap.Mpsmin + 12)) / BlockSize;
- } else {
- MaxTransferBlocks = 1024;
- }
-
- while (Blocks > 0) {
- if (Blocks > MaxTransferBlocks) {
- Status = NvmeWriteSectors (Nvme, Buffer, Lba, MaxTransferBlocks);
-
- Blocks -= MaxTransferBlocks;
- Buffer += (MaxTransferBlocks * BlockSize);
- Lba += MaxTransferBlocks;
- } else {
- Status = NvmeWriteSectors (Nvme, Buffer, Lba, (UINT32) Blocks);
- Blocks = 0;
- }
-
- if (EFI_ERROR(Status)) {
- DEBUG ((DEBUG_ERROR, "NvmeWrite fail, Status = %r\n", Status));
- break;
- }
- }
-
- return Status;
-}
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.h b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.h
deleted file mode 100644
index bfa4f10413fb..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeMode.h
+++ /dev/null
@@ -1,456 +0,0 @@
-/** @file
- Header file for NVMe function definitions
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef __OPAL_PASSWORD_NVME_MODE_H__
-#define __OPAL_PASSWORD_NVME_MODE_H__
-
-
-#include "OpalNvmeReg.h"
-
-#define NVME_MAX_SECTORS 0x10000
-//
-// QueueId
-//
-#define NVME_ADMIN_QUEUE 0x00
-#define NVME_IO_QUEUE 0x01
-
-typedef struct {
- UINT8 Opcode;
- UINT8 FusedOperation;
- #define NORMAL_CMD 0x00
- #define FUSED_FIRST_CMD 0x01
- #define FUSED_SECOND_CMD 0x02
- UINT16 Cid;
-} NVME_CDW0;
-
-typedef struct {
- NVME_CDW0 Cdw0;
- UINT8 Flags;
- #define CDW10_VALID 0x01
- #define CDW11_VALID 0x02
- #define CDW12_VALID 0x04
- #define CDW13_VALID 0x08
- #define CDW14_VALID 0x10
- #define CDW15_VALID 0x20
- UINT32 Nsid;
- UINT32 Cdw10;
- UINT32 Cdw11;
- UINT32 Cdw12;
- UINT32 Cdw13;
- UINT32 Cdw14;
- UINT32 Cdw15;
-} NVM_EXPRESS_COMMAND;
-
-typedef struct {
- UINT32 Cdw0;
- UINT32 Cdw1;
- UINT32 Cdw2;
- UINT32 Cdw3;
-} NVM_EXPRESS_RESPONSE;
-
-typedef struct {
- UINT64 CommandTimeout;
- UINT64 TransferBuffer;
- UINT32 TransferLength;
- UINT64 MetadataBuffer;
- UINT32 MetadataLength;
- UINT8 QueueId;
- NVM_EXPRESS_COMMAND *NvmeCmd;
- NVM_EXPRESS_RESPONSE *NvmeResponse;
-} NVM_EXPRESS_PASS_THRU_COMMAND_PACKET;
-
-
-#pragma pack(1)
-
-// Internal fields
-typedef enum {
- NvmeStatusUnknown,
- NvmeStatusInit,
- NvmeStatusInuse,
- NvmeStatusMax,
-} NVME_STATUS;
-
-typedef struct {
- UINT32 Nbar;
- UINT32 BaseMem;
- BOOLEAN PollCancellation;
- UINT16 NvmeInitWaitTime;
-
- NVME_STATUS State;
- UINT8 BusID;
- UINT8 DeviceID;
- UINT8 FuncID;
- UINTN PciBase;
-
- UINT32 Nsid;
- UINT64 Nsuuid;
- UINT32 BlockSize;
- EFI_LBA LastBlock;
-
- //
- // Pointers to 4kB aligned submission & completion queues.
- //
- NVME_SQ *SqBuffer[NVME_MAX_IO_QUEUES];
- NVME_CQ *CqBuffer[NVME_MAX_IO_QUEUES];
- UINT16 Cid[NVME_MAX_IO_QUEUES];
-
- //
- // Submission and completion queue indices.
- //
- NVME_SQTDBL SqTdbl[NVME_MAX_IO_QUEUES];
- NVME_CQHDBL CqHdbl[NVME_MAX_IO_QUEUES];
- UINT8 Pt[NVME_MAX_IO_QUEUES];
-
- UINTN SqeCount[NVME_MAX_IO_QUEUES];
-
- //
- // Nvme controller capabilities
- //
- NVME_CAP Cap;
-
- //
- // pointer to identify controller Data
- //
- NVME_ADMIN_CONTROLLER_DATA *ControllerData;
- NVME_ADMIN_NAMESPACE_DATA *NamespaceData;
-} NVME_CONTEXT;
-
-#pragma pack()
-
-/**
- Transfer MMIO Data to memory.
-
- @param[in,out] MemBuffer - Destination: Memory address
- @param[in] MmioAddr - Source: MMIO address
- @param[in] Size - Size for read
-
- @retval EFI_SUCCESS - MMIO read sucessfully
-**/
-EFI_STATUS
-NvmeMmioRead (
- IN OUT VOID *MemBuffer,
- IN UINTN MmioAddr,
- IN UINTN Size
- );
-
-/**
- Transfer memory Data to MMIO.
-
- @param[in,out] MmioAddr - Destination: MMIO address
- @param[in] MemBuffer - Source: Memory address
- @param[in] Size - Size for write
-
- @retval EFI_SUCCESS - MMIO write sucessfully
-**/
-EFI_STATUS
-NvmeMmioWrite (
- IN OUT UINTN MmioAddr,
- IN VOID *MemBuffer,
- IN UINTN Size
- );
-
-/**
- Transfer memory data to MMIO.
-
- @param[in,out] MmioAddr - Destination: MMIO address
- @param[in] MemBuffer - Source: Memory address
- @param[in] Size - Size for write
-
- @retval EFI_SUCCESS - MMIO write sucessfully
-**/
-EFI_STATUS
-OpalPciWrite (
- IN OUT UINTN MmioAddr,
- IN VOID *MemBuffer,
- IN UINTN Size
- );
-
-/**
- Transfer MMIO data to memory.
-
- @param[in,out] MemBuffer - Destination: Memory address
- @param[in] MmioAddr - Source: MMIO address
- @param[in] Size - Size for read
-
- @retval EFI_SUCCESS - MMIO read sucessfully
-**/
-EFI_STATUS
-OpalPciRead (
- IN OUT VOID *MemBuffer,
- IN UINTN MmioAddr,
- IN UINTN Size
- );
-
-/**
- Allocate transfer-related Data struct which is used at Nvme.
-
- @param[in] ImageHandle Image handle for this driver image
- @param[in] Nvme The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_OUT_OF_RESOURCE The allocation is failure.
- @retval EFI_SUCCESS Successful to allocate memory.
-
-**/
-EFI_STATUS
-EFIAPI
-NvmeAllocateResource (
- IN EFI_HANDLE ImageHandle,
- IN NVME_CONTEXT *Nvme
- );
-
-/**
- Free allocated transfer-related Data struct which is used at NVMe.
-
- @param[in] Nvme The pointer to the NVME_CONTEXT Data structure.
-
-**/
-VOID
-EFIAPI
-NvmeFreeResource (
- IN NVME_CONTEXT *Nvme
- );
-
-/**
- Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports
- both blocking I/O and nonblocking I/O. The blocking I/O functionality is required, and the nonblocking
- I/O functionality is optional.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] NamespaceId - Is a 32 bit Namespace ID to which the Express HCI command packet will be sent.
- A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
- ID specifies that the command packet should be sent to all valid namespaces.
- @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to which the Express HCI command packet will be sent.
- A Value of 0 denotes the NVM Express controller, a Value of all 0FFh in the namespace
- UUID specifies that the command packet should be sent to all valid namespaces.
- @param[in,out] Packet - A pointer to the NVM Express HCI Command Packet to send to the NVMe namespace specified
- by NamespaceId.
-
- @retval EFI_SUCCESS - The NVM Express Command Packet was sent by the host. TransferLength bytes were transferred
- to, or from DataBuffer.
- @retval EFI_NOT_READY - The NVM Express Command Packet could not be sent because the controller is not ready. The caller
- may retry again later.
- @retval EFI_DEVICE_ERROR - A device error occurred while attempting to send the NVM Express Command Packet.
- @retval EFI_INVALID_PARAMETER - Namespace, or the contents of NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
- Express Command Packet was not sent, so no additional status information is available.
- @retval EFI_UNSUPPORTED - The command described by the NVM Express Command Packet is not supported by the host adapter.
- The NVM Express Command Packet was not sent, so no additional status information is available.
- @retval EFI_TIMEOUT - A timeout occurred while waiting for the NVM Express Command Packet to execute.
-
-**/
-EFI_STATUS
-NvmePassThru (
- IN NVME_CONTEXT *Nvme,
- IN UINT32 NamespaceId,
- IN UINT64 NamespaceUuid,
- IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
- );
-
-/**
- Waits until all NVME commands completed.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Qid - Queue index
-
- @retval EFI_SUCCESS - All NVME commands have completed
- @retval EFI_TIMEOUT - Timeout occured
- @retval EFI_NOT_READY - Not all NVME commands have completed
- @retval others - Error occurred on device side.
-**/
-EFI_STATUS
-NvmeWaitAllComplete (
- IN NVME_CONTEXT *Nvme,
- IN UINT8 Qid
- );
-
-/**
- Initialize the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - The NVM Express Controller is initialized successfully.
- @retval Others - A device error occurred while initializing the controller.
-
-**/
-EFI_STATUS
-NvmeControllerInit (
- IN NVME_CONTEXT *Nvme
- );
-
-/**
- Un-initialize the Nvm Express controller.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - The NVM Express Controller is un-initialized successfully.
- @retval Others - A device error occurred while un-initializing the controller.
-
-**/
-EFI_STATUS
-NvmeControllerExit (
- IN NVME_CONTEXT *Nvme
- );
-
-/**
- Check whether there are available command slots.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Qid - Queue index
-
- @retval EFI_SUCCESS - Available command slot is found
- @retval EFI_NOT_READY - No available command slot is found
- @retval EFI_DEVICE_ERROR - Error occurred on device side.
-
-**/
-EFI_STATUS
-NvmeHasFreeCmdSlot (
- IN NVME_CONTEXT *Nvme,
- IN UINT8 Qid
- );
-
-/**
- Check whether all command slots are clean.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Qid - Queue index
-
- @retval EFI_SUCCESS - All command slots are clean
- @retval EFI_NOT_READY - Not all command slots are clean
- @retval EFI_DEVICE_ERROR - Error occurred on device side.
-
-**/
-EFI_STATUS
-NvmeIsAllCmdSlotClean (
- IN NVME_CONTEXT *Nvme,
- IN UINT8 Qid
- );
-
-/**
- Read sector Data from the NVMe device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in,out] Buffer - The Buffer used to store the Data read from the device.
- @param[in] Lba - The start block number.
- @param[in] Blocks - Total block number to be read.
-
- @retval EFI_SUCCESS - Datum are read from the device.
- @retval Others - Fail to read all the datum.
-
-**/
-EFI_STATUS
-NvmeReadSectors (
- IN NVME_CONTEXT *Nvme,
- IN OUT UINT64 Buffer,
- IN UINT64 Lba,
- IN UINT32 Blocks
- );
-
-/**
- Write sector Data to the NVMe device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Buffer - The Buffer to be written into the device.
- @param[in] Lba - The start block number.
- @param[in] Blocks - Total block number to be written.
-
- @retval EFI_SUCCESS - Datum are written into the Buffer.
- @retval Others - Fail to write all the datum.
-
-**/
-EFI_STATUS
-NvmeWriteSectors (
- IN NVME_CONTEXT *Nvme,
- IN UINT64 Buffer,
- IN UINT64 Lba,
- IN UINT32 Blocks
- );
-
-/**
- Flushes all modified Data to the device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
-
- @retval EFI_SUCCESS - Datum are written into the Buffer.
- @retval Others - Fail to write all the datum.
-
-**/
-EFI_STATUS
-NvmeFlush (
- IN NVME_CONTEXT *Nvme
- );
-
-/**
- Read some blocks from the device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[out] Buffer - The Buffer used to store the Data read from the device.
- @param[in] Lba - The start block number.
- @param[in] Blocks - Total block number to be read.
-
- @retval EFI_SUCCESS - Datum are read from the device.
- @retval Others - Fail to read all the datum.
-
-**/
-EFI_STATUS
-NvmeRead (
- IN NVME_CONTEXT *Nvme,
- OUT UINT64 Buffer,
- IN UINT64 Lba,
- IN UINTN Blocks
- );
-
-/**
- Write some blocks to the device.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] Buffer - The Buffer to be written into the device.
- @param[in] Lba - The start block number.
- @param[in] Blocks - Total block number to be written.
-
- @retval EFI_SUCCESS - Datum are written into the Buffer.
- @retval Others - Fail to write all the datum.
-
-**/
-EFI_STATUS
-NvmeWrite (
- IN NVME_CONTEXT *Nvme,
- IN UINT64 Buffer,
- IN UINT64 Lba,
- IN UINTN Blocks
- );
-
-/**
- Security send and receive commands.
-
- @param[in] Nvme - The pointer to the NVME_CONTEXT Data structure.
- @param[in] SendCommand - The flag to indicate the command type, TRUE for Send command and FALSE for receive command
- @param[in] SecurityProtocol - Security Protocol
- @param[in] SpSpecific - Security Protocol Specific
- @param[in] TransferLength - Transfer Length of Buffer (in bytes) - always a multiple of 512
- @param[in,out] TransferBuffer - Address of Data to transfer
-
- @return EFI_SUCCESS - Successfully create io submission queue.
- @return others - Fail to send/receive commands.
-
-**/
-EFI_STATUS
-NvmeSecuritySendReceive (
- IN NVME_CONTEXT *Nvme,
- IN BOOLEAN SendCommand,
- IN UINT8 SecurityProtocol,
- IN UINT16 SpSpecific,
- IN UINTN TransferLength,
- IN OUT VOID *TransferBuffer
- );
-
-#endif
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeReg.h b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeReg.h
deleted file mode 100644
index b5460cd42e1a..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalNvmeReg.h
+++ /dev/null
@@ -1,814 +0,0 @@
-/** @file
- Header file for Registers and Structure definitions
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-#ifndef __OPAL_PASSWORD_NVME_REG_H__
-#define __OPAL_PASSWORD_NVME_REG_H__
-
-//
-// PCI Header for PCIe root port configuration
-//
-#define NVME_PCIE_PCICMD 0x04
-#define NVME_PCIE_BNUM 0x18
-#define NVME_PCIE_SEC_BNUM 0x19
-#define NVME_PCIE_IOBL 0x1C
-#define NVME_PCIE_MBL 0x20
-#define NVME_PCIE_PMBL 0x24
-#define NVME_PCIE_PMBU32 0x28
-#define NVME_PCIE_PMLU32 0x2C
-#define NVME_PCIE_INTR 0x3C
-
-//
-// NVMe related definitions
-//
-#define PCI_CLASS_MASS_STORAGE_NVM 0x08 // mass storage sub-class non-volatile memory.
-#define PCI_IF_NVMHCI 0x02 // mass storage programming interface NVMHCI.
-
-#define NVME_ASQ_SIZE 1 // Number of admin submission queue entries, which is 0-based
-#define NVME_ACQ_SIZE 1 // Number of admin completion queue entries, which is 0-based
-
-#define NVME_CSQ_SIZE 63 // Number of I/O submission queue entries, which is 0-based
-#define NVME_CCQ_SIZE 63 // Number of I/O completion queue entries, which is 0-based
-
-#define NVME_MAX_IO_QUEUES 2 // Number of I/O queues supported by the driver, 1 for AQ, 1 for CQ
-
-#define NVME_CSQ_DEPTH (NVME_CSQ_SIZE+1)
-#define NVME_CCQ_DEPTH (NVME_CCQ_SIZE+1)
-#define NVME_PRP_SIZE (4) // Pages of PRP list
-
-#define NVME_CONTROLLER_ID 0
-
-//
-// Time out Value for Nvme transaction execution
-//
-#define NVME_GENERIC_TIMEOUT 5000000 ///< us
-#define NVME_CMD_WAIT 100 ///< us
-#define NVME_CMD_TIMEOUT 20000000 ///< us
-
-
-
-#define NVME_MEM_MAX_SIZE \
- (( \
- 1 /* Controller Data */ + \
- 1 /* Identify Data */ + \
- 1 /* ASQ */ + \
- 1 /* ACQ */ + \
- 1 /* SQs */ + \
- 1 /* CQs */ + \
- NVME_PRP_SIZE * NVME_CSQ_DEPTH /* PRPs */ \
- ) * EFI_PAGE_SIZE)
-
-
-//
-// controller register offsets
-//
-#define NVME_CAP_OFFSET 0x0000 // Controller Capabilities
-#define NVME_VER_OFFSET 0x0008 // Version
-#define NVME_INTMS_OFFSET 0x000c // Interrupt Mask Set
-#define NVME_INTMC_OFFSET 0x0010 // Interrupt Mask Clear
-#define NVME_CC_OFFSET 0x0014 // Controller Configuration
-#define NVME_CSTS_OFFSET 0x001c // Controller Status
-#define NVME_AQA_OFFSET 0x0024 // Admin Queue Attributes
-#define NVME_ASQ_OFFSET 0x0028 // Admin Submission Queue Base Address
-#define NVME_ACQ_OFFSET 0x0030 // Admin Completion Queue Base Address
-#define NVME_SQ0_OFFSET 0x1000 // Submission Queue 0 (admin) Tail Doorbell
-#define NVME_CQ0_OFFSET 0x1004 // Completion Queue 0 (admin) Head Doorbell
-
-//
-// These register offsets are defined as 0x1000 + (N * (4 << CAP.DSTRD))
-// Get the doorbell stride bit shift Value from the controller capabilities.
-//
-#define NVME_SQTDBL_OFFSET(QID, DSTRD) 0x1000 + ((2 * (QID)) * (4 << (DSTRD))) // Submission Queue y (NVM) Tail Doorbell
-#define NVME_CQHDBL_OFFSET(QID, DSTRD) 0x1000 + (((2 * (QID)) + 1) * (4 << (DSTRD))) // Completion Queue y (NVM) Head Doorbell
-
-
-#pragma pack(1)
-
-//
-// 3.1.1 Offset 00h: CAP - Controller Capabilities
-//
-typedef struct {
- UINT16 Mqes; // Maximum Queue Entries Supported
- UINT8 Cqr:1; // Contiguous Queues Required
- UINT8 Ams:2; // Arbitration Mechanism Supported
- UINT8 Rsvd1:5;
- UINT8 To; // Timeout
- UINT16 Dstrd:4;
- UINT16 Rsvd2:1;
- UINT16 Css:4; // Command Sets Supported
- UINT16 Rsvd3:7;
- UINT8 Mpsmin:4;
- UINT8 Mpsmax:4;
- UINT8 Rsvd4;
-} NVME_CAP;
-
-//
-// 3.1.2 Offset 08h: VS - Version
-//
-typedef struct {
- UINT16 Mnr; // Minor version number
- UINT16 Mjr; // Major version number
-} NVME_VER;
-
-//
-// 3.1.5 Offset 14h: CC - Controller Configuration
-//
-typedef struct {
- UINT16 En:1; // Enable
- UINT16 Rsvd1:3;
- UINT16 Css:3; // Command Set Selected
- UINT16 Mps:4; // Memory Page Size
- UINT16 Ams:3; // Arbitration Mechanism Selected
- UINT16 Shn:2; // Shutdown Notification
- UINT8 Iosqes:4; // I/O Submission Queue Entry Size
- UINT8 Iocqes:4; // I/O Completion Queue Entry Size
- UINT8 Rsvd2;
-} NVME_CC;
-
-//
-// 3.1.6 Offset 1Ch: CSTS - Controller Status
-//
-typedef struct {
- UINT32 Rdy:1; // Ready
- UINT32 Cfs:1; // Controller Fatal Status
- UINT32 Shst:2; // Shutdown Status
- UINT32 Nssro:1; // NVM Subsystem Reset Occurred
- UINT32 Rsvd1:27;
-} NVME_CSTS;
-
-//
-// 3.1.8 Offset 24h: AQA - Admin Queue Attributes
-//
-typedef struct {
- UINT16 Asqs:12; // Submission Queue Size
- UINT16 Rsvd1:4;
- UINT16 Acqs:12; // Completion Queue Size
- UINT16 Rsvd2:4;
-} NVME_AQA;
-
-//
-// 3.1.9 Offset 28h: ASQ - Admin Submission Queue Base Address
-//
-#define NVME_ASQ UINT64
-
-//
-// 3.1.10 Offset 30h: ACQ - Admin Completion Queue Base Address
-//
-#define NVME_ACQ UINT64
-
-//
-// 3.1.11 Offset (1000h + ((2y) * (4 << CAP.DSTRD))): SQyTDBL - Submission Queue y Tail Doorbell
-//
-typedef struct {
- UINT16 Sqt;
- UINT16 Rsvd1;
-} NVME_SQTDBL;
-
-//
-// 3.1.12 Offset (1000h + ((2y + 1) * (4 << CAP.DSTRD))): CQyHDBL - Completion Queue y Head Doorbell
-//
-typedef struct {
- UINT16 Cqh;
- UINT16 Rsvd1;
-} NVME_CQHDBL;
-
-//
-// NVM command set structures
-//
-// Read Command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting Sector Address */
- //
- // CDW 12
- //
- UINT16 Nlb; /* Number of Sectors */
- UINT16 Rsvd1:10;
- UINT16 Prinfo:4; /* Protection Info Check */
- UINT16 Fua:1; /* Force Unit Access */
- UINT16 Lr:1; /* Limited Retry */
- //
- // CDW 13
- //
- UINT32 Af:4; /* Access Frequency */
- UINT32 Al:2; /* Access Latency */
- UINT32 Sr:1; /* Sequential Request */
- UINT32 In:1; /* Incompressible */
- UINT32 Rsvd2:24;
- //
- // CDW 14
- //
- UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag */
- //
- // CDW 15
- //
- UINT16 Elbat; /* Expected Logical Block Application Tag */
- UINT16 Elbatm; /* Expected Logical Block Application Tag Mask */
-} NVME_READ;
-
-//
-// Write Command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting Sector Address */
- //
- // CDW 12
- //
- UINT16 Nlb; /* Number of Sectors */
- UINT16 Rsvd1:10;
- UINT16 Prinfo:4; /* Protection Info Check */
- UINT16 Fua:1; /* Force Unit Access */
- UINT16 Lr:1; /* Limited Retry */
- //
- // CDW 13
- //
- UINT32 Af:4; /* Access Frequency */
- UINT32 Al:2; /* Access Latency */
- UINT32 Sr:1; /* Sequential Request */
- UINT32 In:1; /* Incompressible */
- UINT32 Rsvd2:24;
- //
- // CDW 14
- //
- UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
- //
- // CDW 15
- //
- UINT16 Lbat; /* Logical Block Application Tag */
- UINT16 Lbatm; /* Logical Block Application Tag Mask */
-} NVME_WRITE;
-
-//
-// Flush
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Flush; /* Flush */
-} NVME_FLUSH;
-
-//
-// Write Uncorrectable command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting LBA */
- //
- // CDW 12
- //
- UINT32 Nlb:16; /* Number of Logical Blocks */
- UINT32 Rsvd1:16;
-} NVME_WRITE_UNCORRECTABLE;
-
-//
-// Write Zeroes command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting LBA */
- //
- // CDW 12
- //
- UINT16 Nlb; /* Number of Logical Blocks */
- UINT16 Rsvd1:10;
- UINT16 Prinfo:4; /* Protection Info Check */
- UINT16 Fua:1; /* Force Unit Access */
- UINT16 Lr:1; /* Limited Retry */
- //
- // CDW 13
- //
- UINT32 Rsvd2;
- //
- // CDW 14
- //
- UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
- //
- // CDW 15
- //
- UINT16 Lbat; /* Logical Block Application Tag */
- UINT16 Lbatm; /* Logical Block Application Tag Mask */
-} NVME_WRITE_ZEROES;
-
-//
-// Compare command
-//
-typedef struct {
- //
- // CDW 10, 11
- //
- UINT64 Slba; /* Starting LBA */
- //
- // CDW 12
- //
- UINT16 Nlb; /* Number of Logical Blocks */
- UINT16 Rsvd1:10;
- UINT16 Prinfo:4; /* Protection Info Check */
- UINT16 Fua:1; /* Force Unit Access */
- UINT16 Lr:1; /* Limited Retry */
- //
- // CDW 13
- //
- UINT32 Rsvd2;
- //
- // CDW 14
- //
- UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag */
- //
- // CDW 15
- //
- UINT16 Elbat; /* Expected Logical Block Application Tag */
- UINT16 Elbatm; /* Expected Logical Block Application Tag Mask */
-} NVME_COMPARE;
-
-typedef union {
- NVME_READ Read;
- NVME_WRITE Write;
- NVME_FLUSH Flush;
- NVME_WRITE_UNCORRECTABLE WriteUncorrectable;
- NVME_WRITE_ZEROES WriteZeros;
- NVME_COMPARE Compare;
-} NVME_CMD;
-
-typedef struct {
- UINT16 Mp; /* Maximum Power */
- UINT8 Rsvd1; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Mps:1; /* Max Power Scale */
- UINT8 Nops:1; /* Non-Operational State */
- UINT8 Rsvd2:6; /* Reserved as of Nvm Express 1.1 Spec */
- UINT32 Enlat; /* Entry Latency */
- UINT32 Exlat; /* Exit Latency */
- UINT8 Rrt:5; /* Relative Read Throughput */
- UINT8 Rsvd3:3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Rrl:5; /* Relative Read Leatency */
- UINT8 Rsvd4:3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Rwt:5; /* Relative Write Throughput */
- UINT8 Rsvd5:3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Rwl:5; /* Relative Write Leatency */
- UINT8 Rsvd6:3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 Rsvd7[16]; /* Reserved as of Nvm Express 1.1 Spec */
-} NVME_PSDESCRIPTOR;
-
-//
-// Identify Controller Data
-//
-typedef struct {
- //
- // Controller Capabilities and Features 0-255
- //
- UINT16 Vid; /* PCI Vendor ID */
- UINT16 Ssvid; /* PCI sub-system vendor ID */
- UINT8 Sn[20]; /* Produce serial number */
-
- UINT8 Mn[40]; /* Proeduct model number */
- UINT8 Fr[8]; /* Firmware Revision */
- UINT8 Rab; /* Recommended Arbitration Burst */
- UINT8 Ieee_oiu[3]; /* Organization Unique Identifier */
- UINT8 Cmic; /* Multi-interface Capabilities */
- UINT8 Mdts; /* Maximum Data Transfer Size */
- UINT8 Cntlid[2]; /* Controller ID */
- UINT8 Rsvd1[176]; /* Reserved as of Nvm Express 1.1 Spec */
- //
- // Admin Command Set Attributes
- //
- UINT16 Oacs; /* Optional Admin Command Support */
- UINT8 Acl; /* Abort Command Limit */
- UINT8 Aerl; /* Async Event Request Limit */
- UINT8 Frmw; /* Firmware updates */
- UINT8 Lpa; /* Log Page Attributes */
- UINT8 Elpe; /* Error Log Page Entries */
- UINT8 Npss; /* Number of Power States Support */
- UINT8 Avscc; /* Admin Vendor Specific Command Configuration */
- UINT8 Apsta; /* Autonomous Power State Transition Attributes */
- UINT8 Rsvd2[246]; /* Reserved as of Nvm Express 1.1 Spec */
- //
- // NVM Command Set Attributes
- //
- UINT8 Sqes; /* Submission Queue Entry Size */
- UINT8 Cqes; /* Completion Queue Entry Size */
- UINT16 Rsvd3; /* Reserved as of Nvm Express 1.1 Spec */
- UINT32 Nn; /* Number of Namespaces */
- UINT16 Oncs; /* Optional NVM Command Support */
- UINT16 Fuses; /* Fused Operation Support */
- UINT8 Fna; /* Format NVM Attributes */
- UINT8 Vwc; /* Volatile Write Cache */
- UINT16 Awun; /* Atomic Write Unit Normal */
- UINT16 Awupf; /* Atomic Write Unit Power Fail */
- UINT8 Nvscc; /* NVM Vendor Specific Command Configuration */
- UINT8 Rsvd4; /* Reserved as of Nvm Express 1.1 Spec */
- UINT16 Acwu; /* Atomic Compare & Write Unit */
- UINT16 Rsvd5; /* Reserved as of Nvm Express 1.1 Spec */
- UINT32 Sgls; /* SGL Support */
- UINT8 Rsvd6[164]; /* Reserved as of Nvm Express 1.1 Spec */
- //
- // I/O Command set Attributes
- //
- UINT8 Rsvd7[1344]; /* Reserved as of Nvm Express 1.1 Spec */
- //
- // Power State Descriptors
- //
- NVME_PSDESCRIPTOR PsDescriptor[32];
-
- UINT8 VendorData[1024]; /* Vendor specific Data */
-} NVME_ADMIN_CONTROLLER_DATA;
-
-typedef struct {
- UINT16 Security : 1; /* supports security send/receive commands */
- UINT16 Format : 1; /* supports format nvm command */
- UINT16 Firmware : 1; /* supports firmware activate/download commands */
- UINT16 Oacs_rsvd : 13;
- } OACS; // optional admin command support: NVME_ADMIN_CONTROLLER_DATA.Oacs
-
-typedef struct {
- UINT16 Ms; /* Metadata Size */
- UINT8 Lbads; /* LBA Data Size */
- UINT8 Rp:2; /* Relative Performance */
- #define LBAF_RP_BEST 00b
- #define LBAF_RP_BETTER 01b
- #define LBAF_RP_GOOD 10b
- #define LBAF_RP_DEGRADED 11b
- UINT8 Rsvd1:6; /* Reserved as of Nvm Express 1.1 Spec */
-} NVME_LBAFORMAT;
-
-//
-// Identify Namespace Data
-//
-typedef struct {
- //
- // NVM Command Set Specific
- //
- UINT64 Nsze; /* Namespace Size (total number of blocks in formatted namespace) */
- UINT64 Ncap; /* Namespace Capacity (max number of logical blocks) */
- UINT64 Nuse; /* Namespace Utilization */
- UINT8 Nsfeat; /* Namespace Features */
- UINT8 Nlbaf; /* Number of LBA Formats */
- UINT8 Flbas; /* Formatted LBA Size */
- UINT8 Mc; /* Metadata Capabilities */
- UINT8 Dpc; /* End-to-end Data Protection capabilities */
- UINT8 Dps; /* End-to-end Data Protection Type Settings */
- UINT8 Nmic; /* Namespace Multi-path I/O and Namespace Sharing Capabilities */
- UINT8 Rescap; /* Reservation Capabilities */
- UINT8 Rsvd1[88]; /* Reserved as of Nvm Express 1.1 Spec */
- UINT64 Eui64; /* IEEE Extended Unique Identifier */
- //
- // LBA Format
- //
- NVME_LBAFORMAT LbaFormat[16];
-
- UINT8 Rsvd2[192]; /* Reserved as of Nvm Express 1.1 Spec */
- UINT8 VendorData[3712]; /* Vendor specific Data */
-} NVME_ADMIN_NAMESPACE_DATA;
-
-//
-// NvmExpress Admin Identify Cmd
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Cns:2;
- UINT32 Rsvd1:30;
-} NVME_ADMIN_IDENTIFY;
-
-//
-// NvmExpress Admin Create I/O Completion Queue
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Qid:16; /* Queue Identifier */
- UINT32 Qsize:16; /* Queue Size */
-
- //
- // CDW 11
- //
- UINT32 Pc:1; /* Physically Contiguous */
- UINT32 Ien:1; /* Interrupts Enabled */
- UINT32 Rsvd1:14; /* reserved as of Nvm Express 1.1 Spec */
- UINT32 Iv:16; /* Interrupt Vector */
-} NVME_ADMIN_CRIOCQ;
-
-//
-// NvmExpress Admin Create I/O Submission Queue
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Qid:16; /* Queue Identifier */
- UINT32 Qsize:16; /* Queue Size */
-
- //
- // CDW 11
- //
- UINT32 Pc:1; /* Physically Contiguous */
- UINT32 Qprio:2; /* Queue Priority */
- UINT32 Rsvd1:13; /* Reserved as of Nvm Express 1.1 Spec */
- UINT32 Cqid:16; /* Completion Queue ID */
-} NVME_ADMIN_CRIOSQ;
-
-//
-// NvmExpress Admin Delete I/O Completion Queue
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT16 Qid;
- UINT16 Rsvd1;
-} NVME_ADMIN_DEIOCQ;
-
-//
-// NvmExpress Admin Delete I/O Submission Queue
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT16 Qid;
- UINT16 Rsvd1;
-} NVME_ADMIN_DEIOSQ;
-
-//
-// NvmExpress Admin Security Send
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Resv:8; /* Reserve */
- UINT32 Spsp:16; /* SP Specific */
- UINT32 Secp:8; /* Security Protocol */
-
- //
- // CDW 11
- //
- UINT32 Tl; /* Transfer Length */
-} NVME_ADMIN_SECSEND;
-
-//
-// NvmExpress Admin Abort Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Sqid:16; /* Submission Queue identifier */
- UINT32 Cid:16; /* Command Identifier */
-} NVME_ADMIN_ABORT;
-
-//
-// NvmExpress Admin Firmware Activate Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Fs:3; /* Submission Queue identifier */
- UINT32 Aa:2; /* Command Identifier */
- UINT32 Rsvd1:27;
-} NVME_ADMIN_FIRMWARE_ACTIVATE;
-
-//
-// NvmExpress Admin Firmware Image Download Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Numd; /* Number of Dwords */
- //
- // CDW 11
- //
- UINT32 Ofst; /* Offset */
-} NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD;
-
-//
-// NvmExpress Admin Get Features Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Fid:8; /* Feature Identifier */
- UINT32 Sel:3; /* Select */
- UINT32 Rsvd1:21;
-} NVME_ADMIN_GET_FEATURES;
-
-//
-// NvmExpress Admin Get Log Page Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Lid:8; /* Log Page Identifier */
- #define LID_ERROR_INFO
- #define LID_SMART_INFO
- #define LID_FW_SLOT_INFO
- UINT32 Rsvd1:8;
- UINT32 Numd:12; /* Number of Dwords */
- UINT32 Rsvd2:4; /* Reserved as of Nvm Express 1.1 Spec */
-} NVME_ADMIN_GET_LOG_PAGE;
-
-//
-// NvmExpress Admin Set Features Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Fid:8; /* Feature Identifier */
- UINT32 Rsvd1:23;
- UINT32 Sv:1; /* Save */
-} NVME_ADMIN_SET_FEATURES;
-
-//
-// NvmExpress Admin Format NVM Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Lbaf:4; /* LBA Format */
- UINT32 Ms:1; /* Metadata Settings */
- UINT32 Pi:3; /* Protection Information */
- UINT32 Pil:1; /* Protection Information Location */
- UINT32 Ses:3; /* Secure Erase Settings */
- UINT32 Rsvd1:20;
-} NVME_ADMIN_FORMAT_NVM;
-
-//
-// NvmExpress Admin Security Receive Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Rsvd1:8;
- UINT32 Spsp:16; /* SP Specific */
- UINT32 Secp:8; /* Security Protocol */
- //
- // CDW 11
- //
- UINT32 Al; /* Allocation Length */
-} NVME_ADMIN_SECURITY_RECEIVE;
-
-//
-// NvmExpress Admin Security Send Command
-//
-typedef struct {
- //
- // CDW 10
- //
- UINT32 Rsvd1:8;
- UINT32 Spsp:16; /* SP Specific */
- UINT32 Secp:8; /* Security Protocol */
- //
- // CDW 11
- //
- UINT32 Tl; /* Transfer Length */
-} NVME_ADMIN_SECURITY_SEND;
-
-typedef union {
- NVME_ADMIN_IDENTIFY Identify;
- NVME_ADMIN_CRIOCQ CrIoCq;
- NVME_ADMIN_CRIOSQ CrIoSq;
- NVME_ADMIN_DEIOCQ DeIoCq;
- NVME_ADMIN_DEIOSQ DeIoSq;
- NVME_ADMIN_ABORT Abort;
- NVME_ADMIN_FIRMWARE_ACTIVATE Activate;
- NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD FirmwareImageDownload;
- NVME_ADMIN_GET_FEATURES GetFeatures;
- NVME_ADMIN_GET_LOG_PAGE GetLogPage;
- NVME_ADMIN_SET_FEATURES SetFeatures;
- NVME_ADMIN_FORMAT_NVM FormatNvm;
- NVME_ADMIN_SECURITY_RECEIVE SecurityReceive;
- NVME_ADMIN_SECURITY_SEND SecuritySend;
-} NVME_ADMIN_CMD;
-
-typedef struct {
- UINT32 Cdw10;
- UINT32 Cdw11;
- UINT32 Cdw12;
- UINT32 Cdw13;
- UINT32 Cdw14;
- UINT32 Cdw15;
-} NVME_RAW;
-
-typedef union {
- NVME_ADMIN_CMD Admin; // Union of Admin commands
- NVME_CMD Nvm; // Union of Nvm commands
- NVME_RAW Raw;
-} NVME_PAYLOAD;
-
-//
-// Submission Queue
-//
-typedef struct {
- //
- // CDW 0, Common to all comnmands
- //
- UINT8 Opc; // Opcode
- UINT8 Fuse:2; // Fused Operation
- UINT8 Rsvd1:5;
- UINT8 Psdt:1; // PRP or SGL for Data Transfer
- UINT16 Cid; // Command Identifier
-
- //
- // CDW 1
- //
- UINT32 Nsid; // Namespace Identifier
-
- //
- // CDW 2,3
- //
- UINT64 Rsvd2;
-
- //
- // CDW 4,5
- //
- UINT64 Mptr; // Metadata Pointer
-
- //
- // CDW 6-9
- //
- UINT64 Prp[2]; // First and second PRP entries
-
- NVME_PAYLOAD Payload;
-
-} NVME_SQ;
-
-//
-// Completion Queue
-//
-typedef struct {
- //
- // CDW 0
- //
- UINT32 Dword0;
- //
- // CDW 1
- //
- UINT32 Rsvd1;
- //
- // CDW 2
- //
- UINT16 Sqhd; // Submission Queue Head Pointer
- UINT16 Sqid; // Submission Queue Identifier
- //
- // CDW 3
- //
- UINT16 Cid; // Command Identifier
- UINT16 Pt:1; // Phase Tag
- UINT16 Sc:8; // Status Code
- UINT16 Sct:3; // Status Code Type
- UINT16 Rsvd2:2;
- UINT16 Mo:1; // More
- UINT16 Dnr:1; // Retry
-} NVME_CQ;
-
-//
-// Nvm Express Admin cmd opcodes
-//
-#define NVME_ADMIN_DELIOSQ_OPC 0
-#define NVME_ADMIN_CRIOSQ_OPC 1
-#define NVME_ADMIN_DELIOCQ_OPC 4
-#define NVME_ADMIN_CRIOCQ_OPC 5
-#define NVME_ADMIN_IDENTIFY_OPC 6
-#define NVME_ADMIN_SECURITY_SEND_OPC 0x81
-#define NVME_ADMIN_SECURITY_RECV_OPC 0x82
-
-#define NVME_IO_FLUSH_OPC 0
-#define NVME_IO_WRITE_OPC 1
-#define NVME_IO_READ_OPC 2
-
-//
-// Offset from the beginning of private Data queue Buffer
-//
-#define NVME_ASQ_BUF_OFFSET EFI_PAGE_SIZE
-
-#pragma pack()
-
-#endif
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.c b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.c
deleted file mode 100644
index 0ea92b15c067..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.c
+++ /dev/null
@@ -1,1088 +0,0 @@
-/** @file
- Opal password smm driver which is used to support Opal security feature at s3 path.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "OpalPasswordSmm.h"
-
-#define SMM_SIZE_ALLOC_BYTES (512)
-#define RESPONSE_SIZE (200)
-
-#define PCI_CLASS_MASS_STORAGE_AHCI (0x06)
-
-#define OPAL_PCIE_ROOTPORT_SAVESIZE (0x40)
-#define STORE_INVALID_ROOTPORT_INDEX ((UINT8) -1)
-#define OPAL_DEVICE_TYPE_SATA 0x1
-#define OPAL_DEVICE_TYPE_NVME 0x2
-#define OPAL_DEVICE_TYPE_UNKNOWN 0xFF
-
-//
-// To unlock the Intel SATA controller at S3 Resume, restored the following registers.
-//
-const OPAL_HC_PCI_REGISTER_SAVE mSataHcRegisterSaveTemplate[] = {
- {0x9, S3BootScriptWidthUint8},
- {0x10, S3BootScriptWidthUint32},
- {0x14, S3BootScriptWidthUint32},
- {0x18, S3BootScriptWidthUint32},
- {0x1C, S3BootScriptWidthUint32},
- {0x20, S3BootScriptWidthUint32},
- {0x24, S3BootScriptWidthUint32},
- {0x3c, S3BootScriptWidthUint8},
- {0x3d, S3BootScriptWidthUint8},
- {0x40, S3BootScriptWidthUint16},
- {0x42, S3BootScriptWidthUint16},
- {0x92, S3BootScriptWidthUint16},
- {0x94, S3BootScriptWidthUint32},
- {0x9C, S3BootScriptWidthUint32},
- {0x4, S3BootScriptWidthUint16},
-};
-
-
-UINT8 mSwSmiValue;
-LIST_ENTRY *mOpalDeviceList;
-LIST_ENTRY mSmmDeviceList = INITIALIZE_LIST_HEAD_VARIABLE (mSmmDeviceList);
-
-BOOLEAN mSendBlockSID = FALSE;
-
-// AHCI
-UINT32 mAhciBar = 0;
-EFI_AHCI_REGISTERS mAhciRegisters;
-VOID *mBuffer = NULL; // DMA can not read/write Data to smram, so we pre-allocates Buffer from AcpiNVS.
-//
-// NVME
-NVME_CONTEXT mNvmeContext;
-
-/**
- Add new bridge node or nvme device info to the device list.
-
- @param[in] BusNum The bus number.
- @param[in] DevNum The device number.
- @param[in] FuncNum The function number.
- @param[in] Dev The device which need to add device node info.
-
-**/
-VOID
-AddPciDeviceNode (
- UINT32 BusNum,
- UINT32 DevNum,
- UINT32 FuncNum,
- OPAL_SMM_DEVICE *Dev
- )
-{
- UINT8 *DevList;
- PCI_DEVICE *DeviceNode;
-
- DevList = AllocateZeroPool (sizeof (PCI_DEVICE) + Dev->Length);
- ASSERT (DevList != NULL);
-
- if (Dev->Length != 0) {
- CopyMem (DevList, Dev->PciBridgeNode, Dev->Length);
- FreePool (Dev->PciBridgeNode);
- }
-
- DeviceNode = (PCI_DEVICE *) (DevList + Dev->Length);
-
- DeviceNode->BusNum = BusNum;
- DeviceNode->DevNum = DevNum;
- DeviceNode->FuncNum = FuncNum;
-
- Dev->Length += sizeof (PCI_DEVICE);
- Dev->PciBridgeNode = (PCI_DEVICE *)DevList;
-}
-
-/**
- Extract device info from the input device path.
-
- @param[in] DevicePath Device path info for the device.
- @param[in,out] Dev The device which new inputed.
-
-**/
-VOID
-ExtractDeviceInfoFromDevicePath (
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- IN OUT OPAL_SMM_DEVICE *Dev
- )
-{
- EFI_DEVICE_PATH_PROTOCOL *TmpDevPath;
- EFI_DEVICE_PATH_PROTOCOL *TmpDevPath2;
- PCI_DEVICE_PATH *PciDevPath;
- SATA_DEVICE_PATH *SataDevPath;
- NVME_NAMESPACE_DEVICE_PATH *NvmeDevPath;
- UINTN BusNum;
-
- TmpDevPath = DevicePath;
- Dev->DeviceType = OPAL_DEVICE_TYPE_UNKNOWN;
-
- while (!IsDevicePathEnd(TmpDevPath)) {
- if (TmpDevPath->Type == MESSAGING_DEVICE_PATH && TmpDevPath->SubType == MSG_SATA_DP) {
- //
- // SATA
- //
- SataDevPath = ( SATA_DEVICE_PATH* )TmpDevPath;
- Dev->SataPort = SataDevPath->HBAPortNumber;
- Dev->SataPortMultiplierPort = SataDevPath->PortMultiplierPortNumber;
- Dev->DeviceType = OPAL_DEVICE_TYPE_SATA;
- break;
- } else if (TmpDevPath->Type == MESSAGING_DEVICE_PATH && TmpDevPath->SubType == MSG_NVME_NAMESPACE_DP) {
- //
- // NVMe
- //
- NvmeDevPath = ( NVME_NAMESPACE_DEVICE_PATH* )TmpDevPath;
- Dev->NvmeNamespaceId = NvmeDevPath->NamespaceId;
- Dev->DeviceType = OPAL_DEVICE_TYPE_NVME;
- break;
- }
- TmpDevPath = NextDevicePathNode (TmpDevPath);
- }
-
- //
- // Get bridge node info for the nvme device.
- //
- BusNum = 0;
- TmpDevPath = DevicePath;
- TmpDevPath2 = NextDevicePathNode (DevicePath);
- while (!IsDevicePathEnd(TmpDevPath2)) {
- if (TmpDevPath->Type == HARDWARE_DEVICE_PATH && TmpDevPath->SubType == HW_PCI_DP) {
- PciDevPath = (PCI_DEVICE_PATH *) TmpDevPath;
- if ((TmpDevPath2->Type == MESSAGING_DEVICE_PATH && TmpDevPath2->SubType == MSG_NVME_NAMESPACE_DP)||
- (TmpDevPath2->Type == MESSAGING_DEVICE_PATH && TmpDevPath2->SubType == MSG_SATA_DP)) {
- Dev->BusNum = (UINT32)BusNum;
- Dev->DevNum = PciDevPath->Device;
- Dev->FuncNum = PciDevPath->Function;
- } else {
- AddPciDeviceNode((UINT32)BusNum, PciDevPath->Device, PciDevPath->Function, Dev);
- if (TmpDevPath2->Type == HARDWARE_DEVICE_PATH && TmpDevPath2->SubType == HW_PCI_DP) {
- BusNum = PciRead8 (PCI_LIB_ADDRESS (BusNum, PciDevPath->Device, PciDevPath->Function, NVME_PCIE_SEC_BNUM));
- }
- }
- }
-
- TmpDevPath = NextDevicePathNode (TmpDevPath);
- TmpDevPath2 = NextDevicePathNode (TmpDevPath2);
- }
-}
-
-/**
-
- The function returns whether or not the device is Opal Locked.
- TRUE means that the device is partially or fully locked.
- This will perform a Level 0 Discovery and parse the locking feature descriptor
-
- @param[in] OpalDev Opal object to determine if locked
- @param[out] BlockSidSupported Whether device support BlockSid feature.
-
-**/
-BOOLEAN
-IsOpalDeviceLocked(
- OPAL_SMM_DEVICE *OpalDev,
- BOOLEAN *BlockSidSupported
- )
-{
- OPAL_SESSION Session;
- OPAL_DISK_SUPPORT_ATTRIBUTE SupportedAttributes;
- TCG_LOCKING_FEATURE_DESCRIPTOR LockingFeature;
- UINT16 OpalBaseComId;
- TCG_RESULT Ret;
-
- Session.Sscp = &OpalDev->Sscp;
- Session.MediaId = 0;
-
- Ret = OpalGetSupportedAttributesInfo (&Session, &SupportedAttributes, &OpalBaseComId);
- if (Ret != TcgResultSuccess) {
- return FALSE;
- }
-
- OpalDev->OpalBaseComId = OpalBaseComId;
- Session.OpalBaseComId = OpalBaseComId;
- *BlockSidSupported = SupportedAttributes.BlockSid == 1 ? TRUE : FALSE;
-
- Ret = OpalGetLockingInfo(&Session, &LockingFeature);
- if (Ret != TcgResultSuccess) {
- return FALSE;
- }
-
- return OpalDeviceLocked (&SupportedAttributes, &LockingFeature);
-}
-
-/**
- Save/Restore RootPort configuration space.
-
- @param[in] DeviceNode - The device node.
- @param[in] SaveAction - TRUE: Save, FALSE: Restore
- @param[in,out] PcieConfBufferList - Configuration space data buffer for save/restore
-
- @retval - PCIE base address of this RootPort
-**/
-UINTN
-SaveRestoreRootportConfSpace (
- IN OPAL_SMM_DEVICE *DeviceNode,
- IN BOOLEAN SaveAction,
- IN OUT UINT8 **PcieConfBufferList
- )
-{
- UINTN RpBase;
- UINTN Length;
- PCI_DEVICE *DevNode;
- UINT8 *StorePcieConfData;
- UINTN Index;
-
- Length = 0;
- Index = 0;
- RpBase = 0;
-
- while (Length < DeviceNode->Length) {
- DevNode = (PCI_DEVICE *)((UINT8*)DeviceNode->PciBridgeNode + Length);
- RpBase = PCI_LIB_ADDRESS (DevNode->BusNum, DevNode->DevNum, DevNode->FuncNum, 0x0);
-
- if (PcieConfBufferList != NULL) {
- if (SaveAction) {
- StorePcieConfData = (UINT8 *) AllocateZeroPool (OPAL_PCIE_ROOTPORT_SAVESIZE);
- ASSERT (StorePcieConfData != NULL);
- OpalPciRead (StorePcieConfData, RpBase, OPAL_PCIE_ROOTPORT_SAVESIZE);
- PcieConfBufferList[Index] = StorePcieConfData;
- } else {
- // Skip PCIe Command & Status registers
- StorePcieConfData = PcieConfBufferList[Index];
- OpalPciWrite (RpBase, StorePcieConfData, 4);
- OpalPciWrite (RpBase + 8, StorePcieConfData + 8, OPAL_PCIE_ROOTPORT_SAVESIZE - 8);
-
- FreePool (StorePcieConfData);
- }
- }
-
- Length += sizeof (PCI_DEVICE);
- Index ++;
- }
-
- return RpBase;
-}
-
-/**
- Configure RootPort for downstream PCIe NAND devices.
-
- @param[in] RpBase - PCIe configuration space address of this RootPort
- @param[in] BusNumber - Bus number
- @param[in] MemoryBase - Memory base address
- @param[in] MemoryLength - Memory size
-
-**/
-VOID
-ConfigureRootPortForPcieNand (
- IN UINTN RpBase,
- IN UINTN BusNumber,
- IN UINT32 MemoryBase,
- IN UINT32 MemoryLength
- )
-{
- UINT32 MemoryLimit;
-
- DEBUG ((DEBUG_INFO, "ConfigureRootPortForPcieNand, BusNumber: %x, MemoryBase: %x, MemoryLength: %x\n",
- BusNumber, MemoryBase, MemoryLength));
-
- if (MemoryLength == 0) {
- MemoryLimit = MemoryBase;
- } else {
- MemoryLimit = MemoryBase + MemoryLength + 0xFFFFF; // 1M
- }
-
- ///
- /// Configue PCIE configuration space for RootPort
- ///
- PciWrite8 (RpBase + NVME_PCIE_BNUM + 1, (UINT8) BusNumber); // Secondary Bus Number registers
- PciWrite8 (RpBase + NVME_PCIE_BNUM + 2, (UINT8) BusNumber); // Subordinate Bus Number registers
- PciWrite8 (RpBase + NVME_PCIE_IOBL, 0xFF); // I/O Base registers
- PciWrite8 (RpBase + NVME_PCIE_IOBL + 1, 0x00); // I/O Limit registers
- PciWrite16 (RpBase + NVME_PCIE_MBL, (UINT16) RShiftU64 ((UINTN)MemoryBase, 16)); // Memory Base register
- PciWrite16 (RpBase + NVME_PCIE_MBL + 2, (UINT16) RShiftU64 ((UINTN)MemoryLimit, 16)); // Memory Limit register
- PciWrite16 (RpBase + NVME_PCIE_PMBL, 0xFFFF); // Prefetchable Memory Base registers
- PciWrite16 (RpBase + NVME_PCIE_PMBL + 2, 0x0000); // Prefetchable Memory Limit registers
- PciWrite32 (RpBase + NVME_PCIE_PMBU32, 0xFFFFFFFF); // Prefetchable Memory Upper Base registers
- PciWrite32 (RpBase + NVME_PCIE_PMLU32, 0x00000000); // Prefetchable Memory Upper Limit registers
-}
-
-
-/**
- Dispatch function for a Software SMI handler.
-
- @param[in] DispatchHandle The unique handle assigned to this handler by SmiHandlerRegister().
- @param[in] RegisterContext Points to an optional handler context which was specified when the
- handler was registered.
- @param[in, out] CommBuffer A pointer to a collection of Data in memory that will
- be conveyed from a non-SMM environment into an SMM environment.
- @param[in, out] CommBufferSize The Size of the CommBuffer.
-
- @retval EFI_SUCCESS The interrupt was handled and quiesced. No other handlers
- should still be called.
- @retval Others Other execution results.
-**/
-EFI_STATUS
-EFIAPI
-SmmUnlockOpalPassword (
- IN EFI_HANDLE DispatchHandle,
- IN CONST VOID *RegisterContext,
- IN OUT VOID *CommBuffer,
- IN OUT UINTN *CommBufferSize
- )
-{
- EFI_STATUS Status;
- OPAL_SMM_DEVICE *OpalDev;
- LIST_ENTRY *Entry;
- UINT8 BaseClassCode;
- UINT8 SubClassCode;
- UINT8 ProgInt;
- TCG_RESULT Result;
- UINT8 SataCmdSt;
- UINT8 *StorePcieConfDataList[16];
- UINTN RpBase;
- UINTN MemoryBase;
- UINTN MemoryLength;
- OPAL_SESSION Session;
- BOOLEAN BlockSidSupport;
-
- ZeroMem (StorePcieConfDataList, sizeof (StorePcieConfDataList));
- Status = EFI_DEVICE_ERROR;
-
- //
- // try to unlock all locked hdd disks.
- //
- for (Entry = mSmmDeviceList.ForwardLink; Entry != &mSmmDeviceList; Entry = Entry->ForwardLink) {
- OpalDev = BASE_CR(Entry, OPAL_SMM_DEVICE, Link);
-
- RpBase = 0;
- SataCmdSt = 0;
-
- ///
- /// Configure RootPort for PCIe AHCI/NVME devices.
- ///
- if (OpalDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
- ///
- /// Save original RootPort configuration space to heap
- ///
- RpBase = SaveRestoreRootportConfSpace (
- OpalDev,
- TRUE,
- StorePcieConfDataList
- );
- MemoryBase = mNvmeContext.Nbar;
- MemoryLength = 0;
- ConfigureRootPortForPcieNand (RpBase, OpalDev->BusNum, (UINT32) MemoryBase, (UINT32) MemoryLength);
-
- ///
- /// Enable PCIE decode for RootPort
- ///
- SataCmdSt = PciRead8 (RpBase + NVME_PCIE_PCICMD);
- PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0x6);
- } else {
- SataCmdSt = PciRead8 (PCI_LIB_ADDRESS (OpalDev->BusNum, OpalDev->DevNum, OpalDev->FuncNum, NVME_PCIE_PCICMD));
- PciWrite8 (PCI_LIB_ADDRESS (OpalDev->BusNum, OpalDev->DevNum, OpalDev->FuncNum, NVME_PCIE_PCICMD), 0x6);
- }
-
- BaseClassCode = PciRead8 (PCI_LIB_ADDRESS (OpalDev->BusNum, OpalDev->DevNum, OpalDev->FuncNum, 0x0B));
- SubClassCode = PciRead8 (PCI_LIB_ADDRESS (OpalDev->BusNum, OpalDev->DevNum, OpalDev->FuncNum, 0x0A));
- ProgInt = PciRead8 (PCI_LIB_ADDRESS (OpalDev->BusNum, OpalDev->DevNum, OpalDev->FuncNum, 0x09));
- if (BaseClassCode != PCI_CLASS_MASS_STORAGE) {
- Status = EFI_INVALID_PARAMETER;
- break;
- }
-
- Status = EFI_DEVICE_ERROR;
- if (OpalDev->DeviceType == OPAL_DEVICE_TYPE_SATA) {
- if ((SubClassCode == PCI_CLASS_MASS_STORAGE_AHCI) || (SubClassCode == PCI_CLASS_MASS_STORAGE_RAID)) {
- Status = GetAhciBaseAddress (OpalDev->BusNum, OpalDev->DevNum, OpalDev->FuncNum);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "GetAhciBaseAddress error, Status: %r\n", Status));
- goto done;
- }
- Status = AhciModeInitialize ((UINT8)OpalDev->SataPort);
- ASSERT_EFI_ERROR (Status);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "AhciModeInitialize error, Status: %r\n", Status));
- goto done;
- }
- } else {
- DEBUG ((DEBUG_ERROR, "SubClassCode not support for SATA device\n"));
- }
- } else if (OpalDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
- if (SubClassCode == PCI_CLASS_MASS_STORAGE_NVM) {
- if (ProgInt != PCI_IF_NVMHCI) {
- DEBUG ((DEBUG_ERROR, "PI not support, skipped\n"));
- Status = EFI_NOT_FOUND;
- goto done;
- }
-
- mNvmeContext.PciBase = PCI_LIB_ADDRESS (OpalDev->BusNum, OpalDev->DevNum, OpalDev->FuncNum, 0x0);
- mNvmeContext.NvmeInitWaitTime = 0;
- mNvmeContext.Nsid = OpalDev->NvmeNamespaceId;
- Status = NvmeControllerInit (&mNvmeContext);
- } else {
- DEBUG ((DEBUG_ERROR, "SubClassCode not support for NVME device\n"));
- }
- } else {
- DEBUG ((DEBUG_ERROR, "Invalid Devicetype\n"));
- goto done;
- }
-
- Status = EFI_DEVICE_ERROR;
- BlockSidSupport = FALSE;
- if (IsOpalDeviceLocked (OpalDev, &BlockSidSupport)) {
- ZeroMem(&Session, sizeof(Session));
- Session.Sscp = &OpalDev->Sscp;
- Session.MediaId = 0;
- Session.OpalBaseComId = OpalDev->OpalBaseComId;
-
- Result = OpalSupportUnlock (&Session, OpalDev->Password, OpalDev->PasswordLength, NULL);
- if (Result == TcgResultSuccess) {
- Status = EFI_SUCCESS;
- }
- }
-
- if (mSendBlockSID && BlockSidSupport) {
- Result = OpalBlockSid (&Session, TRUE);
- if (Result != TcgResultSuccess) {
- break;
- }
- }
-
- if (OpalDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
- if (SubClassCode == PCI_CLASS_MASS_STORAGE_NVM) {
- Status = NvmeControllerExit (&mNvmeContext);
- }
- }
-
-done:
- if (OpalDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
- ASSERT (RpBase != 0);
- PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0);
- RpBase = SaveRestoreRootportConfSpace (
- OpalDev,
- FALSE, // restore
- StorePcieConfDataList
- );
- PciWrite8 (RpBase + NVME_PCIE_PCICMD, SataCmdSt);
- } else {
- PciWrite8 (PCI_LIB_ADDRESS (OpalDev->BusNum, OpalDev->DevNum, OpalDev->FuncNum, NVME_PCIE_PCICMD), SataCmdSt);
- }
-
- if (EFI_ERROR (Status)) {
- break;
- }
- }
-
- return Status;
-}
-
-/**
- The function extracts device information from OpalDeviceList and creat SmmDeviceList used for S3.
-
- @param[in] OpalDeviceList Opal device list created at POST which contains the information of OPAL_DISK_AND_PASSWORD_INFO
- @param[in,out] SmmDeviceList Opal Smm device list to be created and used for unlocking devices at S3 resume.
-
- @retval EFI_SUCCESS Create SmmDeviceList successfully.
- @retval Others Other execution results.
-**/
-EFI_STATUS
-CreateSmmDeviceList (
- IN LIST_ENTRY *OpalDeviceList,
- IN OUT LIST_ENTRY *SmmDeviceList
- )
-{
- LIST_ENTRY *Entry;
- OPAL_DISK_AND_PASSWORD_INFO *PciDev;
- OPAL_SMM_DEVICE *SmmDev;
-
- for (Entry = OpalDeviceList->ForwardLink; Entry != OpalDeviceList; Entry = Entry->ForwardLink) {
- PciDev = BASE_CR (Entry, OPAL_DISK_AND_PASSWORD_INFO, Link);
-
- SmmDev = AllocateZeroPool (sizeof (OPAL_SMM_DEVICE));
- if (SmmDev == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
- SmmDev->Signature = OPAL_SMM_DEVICE_SIGNATURE;
-
- ExtractDeviceInfoFromDevicePath(&PciDev->OpalDevicePath, SmmDev);
-
- SmmDev->PasswordLength = PciDev->PasswordLength;
- CopyMem(&(SmmDev->Password), PciDev->Password, OPAL_PASSWORD_MAX_LENGTH);
-
- SmmDev->Sscp.ReceiveData = SecurityReceiveData;
- SmmDev->Sscp.SendData = SecuritySendData;
-
- DEBUG ((DEBUG_INFO, "Opal SMM: Insert device node to SmmDeviceList:\n"));
- DEBUG ((DEBUG_INFO, "DeviceType:%x, Bus:%d, Dev:%d, Fun:%d\n", \
- SmmDev->DeviceType, SmmDev->BusNum, SmmDev->DevNum, SmmDev->FuncNum));
- DEBUG ((DEBUG_INFO, "SataPort:%x, MultiplierPort:%x, NvmeNamespaceId:%x\n", \
- SmmDev->SataPort, SmmDev->SataPortMultiplierPort, SmmDev->NvmeNamespaceId));
-
- InsertHeadList (SmmDeviceList, &SmmDev->Link);
- }
-
- return EFI_SUCCESS;
-}
-
-/**
- Main entry point for an SMM handler dispatch or communicate-based callback.
-
- @param[in] DispatchHandle The unique handle assigned to this handler by SmiHandlerRegister().
- @param[in] Context Points to an optional handler context which was specified when the
- handler was registered.
- @param[in,out] CommBuffer A pointer to a collection of Data in memory that will
- be conveyed from a non-SMM environment into an SMM environment.
- @param[in,out] CommBufferSize The Size of the CommBuffer.
-
- @retval EFI_SUCCESS The interrupt was handled and quiesced. No other handlers
- should still be called.
- @retval EFI_WARN_INTERRUPT_SOURCE_QUIESCED The interrupt has been quiesced but other handlers should
- still be called.
- @retval EFI_WARN_INTERRUPT_SOURCE_PENDING The interrupt is still pending and other handlers should still
- be called.
- @retval EFI_INTERRUPT_PENDING The interrupt could not be quiesced.
-**/
-EFI_STATUS
-EFIAPI
-S3SleepEntryCallBack (
- IN EFI_HANDLE DispatchHandle,
- IN CONST VOID *Context OPTIONAL,
- IN OUT VOID *CommBuffer OPTIONAL,
- IN OUT UINTN *CommBufferSize OPTIONAL
- )
-{
- UINTN Bus;
- UINTN Device;
- UINTN Function;
- UINTN Index;
- EFI_STATUS Status;
- LIST_ENTRY *Entry;
- UINTN Offset;
- UINT64 Address;
- S3_BOOT_SCRIPT_LIB_WIDTH Width;
- UINT32 Data;
- OPAL_HC_PCI_REGISTER_SAVE *HcRegisterSaveListPtr;
- UINTN Count;
- OPAL_SMM_DEVICE *SmmDev;
-
- Data = 0;
- Status = EFI_SUCCESS;
-
- mOpalDeviceList = OpalSupportGetOpalDeviceList();
- if (IsListEmpty (mOpalDeviceList)) {
- //
- // No Opal enabled device. Do nothing.
- //
- return EFI_SUCCESS;
- }
-
- if (IsListEmpty (&mSmmDeviceList)) {
- //
- // mSmmDeviceList for S3 is empty, creat it by mOpalDeviceList.
- //
- Status = CreateSmmDeviceList (mOpalDeviceList, &mSmmDeviceList);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
-
- //
- // Go through SmmDeviceList to save register data for S3
- //
- for (Entry = mSmmDeviceList.ForwardLink; Entry != &mSmmDeviceList; Entry = Entry->ForwardLink) {
- SmmDev = BASE_CR (Entry, OPAL_SMM_DEVICE, Link);
-
- if (SmmDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
- continue;
- }
-
- //
- // Save register Data for S3. Sata controller only.
- //
- Bus = SmmDev->BusNum;
- Device = SmmDev->DevNum;
- Function = SmmDev->FuncNum;
-
- ASSERT (SmmDev->DeviceType == OPAL_DEVICE_TYPE_SATA);
- HcRegisterSaveListPtr = (OPAL_HC_PCI_REGISTER_SAVE *) mSataHcRegisterSaveTemplate;
- Count = sizeof (mSataHcRegisterSaveTemplate) / sizeof (OPAL_HC_PCI_REGISTER_SAVE);
-
- for (Index = 0; Index < Count; Index += 1) {
- Offset = HcRegisterSaveListPtr[Index].Address;
- Width = HcRegisterSaveListPtr[Index].Width;
-
- switch (Width) {
- case S3BootScriptWidthUint8:
- Data = (UINT32)PciRead8 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
- break;
- case S3BootScriptWidthUint16:
- Data = (UINT32)PciRead16 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
- break;
- case S3BootScriptWidthUint32:
- Data = PciRead32 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
- break;
- default:
- ASSERT (FALSE);
- break;
- }
-
- Address = S3_BOOT_SCRIPT_LIB_PCI_ADDRESS (Bus, Device, Function, Offset);
- Status = S3BootScriptSavePciCfgWrite (Width, Address, 1, &Data);
- if (EFI_ERROR (Status)) {
- return Status;
- }
- }
- }
-
- Status = S3BootScriptSaveIoWrite (S3BootScriptWidthUint8, 0xB2, 1, &mSwSmiValue);
- ASSERT_EFI_ERROR (Status);
-
- return Status;
-}
-
-/**
- Main entry for this driver.
-
- @param ImageHandle Image handle this driver.
- @param SystemTable Pointer to SystemTable.
-
- @retval EFI_SUCESS This function always complete successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalPasswordSmmInit (
- IN EFI_HANDLE ImageHandle,
- IN EFI_SYSTEM_TABLE *SystemTable
- )
-{
- EFI_STATUS Status;
- EFI_SMM_SW_DISPATCH2_PROTOCOL *SwDispatch;
- EFI_SMM_SX_DISPATCH2_PROTOCOL *SxDispatch;
- EFI_HANDLE SwHandle;
- EFI_SMM_SW_REGISTER_CONTEXT Context;
- EFI_HANDLE S3SleepEntryHandle;
- EFI_SMM_SX_REGISTER_CONTEXT EntryRegisterContext;
- EFI_SMM_VARIABLE_PROTOCOL *SmmVariable;
- OPAL_EXTRA_INFO_VAR OpalExtraInfo;
- UINTN DataSize;
- EFI_PHYSICAL_ADDRESS Address;
-
- mBuffer = NULL;
- SwHandle = NULL;
- S3SleepEntryHandle = NULL;
- ZeroMem (&mNvmeContext, sizeof (NVME_CONTEXT));
-
- Status = gSmst->SmmLocateProtocol (
- &gEfiSmmSwDispatch2ProtocolGuid,
- NULL,
- (VOID **)&SwDispatch
- );
- ASSERT_EFI_ERROR (Status);
- if (EFI_ERROR (Status)) {
- DEBUG((DEBUG_ERROR, " SmmLocateProtocol gEfiSmmSwDispatch2ProtocolGuid fail, Status: %r\n", Status));
- return Status;
- }
-
- Status = gSmst->SmmLocateProtocol (
- &gEfiSmmSxDispatch2ProtocolGuid,
- NULL,
- (VOID **)&SxDispatch
- );
- ASSERT_EFI_ERROR (Status);
- if (EFI_ERROR (Status)) {
- DEBUG((DEBUG_ERROR, " SmmLocateProtocol gEfiSmmSxDispatch2ProtocolGuid fail, Status: %r\n", Status));
- return Status;
- }
-
- //
- // Preallocate a 512 bytes Buffer to perform trusted I/O.
- // Assume this is big enough for unlock commands
- // It's because DMA can not access smmram stack at the cmd execution.
- //
- Address = 0xFFFFFFFF;
- Status = gBS->AllocatePages (
- AllocateMaxAddress,
- EfiACPIMemoryNVS,
- EFI_SIZE_TO_PAGES (SMM_SIZE_ALLOC_BYTES),
- &Address
- );
- if (EFI_ERROR (Status)) {
- DEBUG((DEBUG_ERROR, " AllocatePages for SATA DAM fail, Status: %r\n", Status));
- return EFI_OUT_OF_RESOURCES;
- }
-
- mBuffer = (VOID *)(UINTN)Address;
- ZeroMem ((VOID *)(UINTN)mBuffer, SMM_SIZE_ALLOC_BYTES);
-
- //
- // Preallocate resource for AHCI transfer descriptor.
- //
- Status = AhciAllocateResource ();
- if (EFI_ERROR (Status)) {
- DEBUG((DEBUG_ERROR, " AhciAllocateResource fail, Status: %r\n", Status));
- Status = EFI_OUT_OF_RESOURCES;
- goto EXIT;
- }
-
- //
- // Preallocate resource for NVMe configuration space.
- //
- Status = NvmeAllocateResource (ImageHandle, &mNvmeContext);
- if (EFI_ERROR (Status)) {
- DEBUG((DEBUG_ERROR, " NvmeAllocateResource fail, Status: %r\n", Status));
- Status = EFI_OUT_OF_RESOURCES;
- goto EXIT;
- }
-
- //
- // Register a S3 entry callback function to store ATA host controller context to boot script.
- // These boot scripts would be invoked at S3 path to recovery ATA host controller h/w context
- // for executing HDD unlock cmd.
- //
- EntryRegisterContext.Type = SxS3;
- EntryRegisterContext.Phase = SxEntry;
- Status = SxDispatch->Register (
- SxDispatch,
- S3SleepEntryCallBack,
- &EntryRegisterContext,
- &S3SleepEntryHandle
- );
- ASSERT_EFI_ERROR (Status);
- if (EFI_ERROR (Status)) {
- goto EXIT;
- }
-
- //
- // Register Opal password smm unlock handler
- //
- Context.SwSmiInputValue = (UINTN) -1;
- Status = SwDispatch->Register (
- SwDispatch,
- SmmUnlockOpalPassword,
- &Context,
- &SwHandle
- );
- ASSERT_EFI_ERROR (Status);
- if (EFI_ERROR (Status)) {
- DEBUG((DEBUG_ERROR, " SwDispatch->Register fail, Status: %r\n", Status));
- goto EXIT;
- }
-
- //
- // trigger smi to unlock hdd if it's locked.
- //
- mSwSmiValue = (UINT8) Context.SwSmiInputValue;
-
- Status = gSmst->SmmLocateProtocol (&gEfiSmmVariableProtocolGuid, NULL, (VOID**)&SmmVariable);
- if (!EFI_ERROR (Status)) {
- DataSize = sizeof (OPAL_EXTRA_INFO_VAR);
- Status = SmmVariable->SmmGetVariable (
- OPAL_EXTRA_INFO_VAR_NAME,
- &gOpalExtraInfoVariableGuid,
- NULL,
- &DataSize,
- &OpalExtraInfo
- );
- if (!EFI_ERROR (Status)) {
- mSendBlockSID = OpalExtraInfo.EnableBlockSid;
- }
- }
-
- return EFI_SUCCESS;
-
-EXIT:
- if (S3SleepEntryHandle != NULL) {
- SxDispatch->UnRegister (SxDispatch, S3SleepEntryHandle);
- }
-
- AhciFreeResource ();
-
- NvmeFreeResource (&mNvmeContext);
-
- if (mBuffer != NULL) {
- gBS->FreePages ((EFI_PHYSICAL_ADDRESS)(UINTN) mBuffer, EFI_SIZE_TO_PAGES (SMM_SIZE_ALLOC_BYTES));
- }
-
- return Status;
-}
-
-/**
- Provide Io action support.
-
- @param[in] SmmDev the opal device need to perform trust io.
- @param[in] IoType OPAL_IO_TYPE indicating whether to perform a Trusted Send or Trusted Receive.
- @param[in] SecurityProtocol Security Protocol
- @param[in] SpSpecific Security Protocol Specific
- @param[in] TransferLength Transfer Length of Buffer (in bytes) - always a multiple of 512
- @param[in] Buffer Address of Data to transfer
-
- @retval TcgResultSuccess Perform the io action success.
- @retval TcgResultFailure Perform the io action failed.
-
-**/
-EFI_STATUS
-PerformTrustedIo (
- OPAL_SMM_DEVICE *SmmDev,
- OPAL_IO_TYPE IoType,
- UINT8 SecurityProtocol,
- UINT16 SpSpecific,
- UINTN TransferLength,
- VOID *Buffer
- )
-{
- EFI_STATUS Status;
- UINTN BufferSizeBlocks;
- EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
-
- Status = EFI_DEVICE_ERROR;
- if (SmmDev->DeviceType == OPAL_DEVICE_TYPE_SATA) {
- BufferSizeBlocks = TransferLength / 512;
-
- ZeroMem( &AtaCommandBlock, sizeof( EFI_ATA_COMMAND_BLOCK ) );
- AtaCommandBlock.AtaCommand = ( IoType == OpalSend ) ? ATA_COMMAND_TRUSTED_SEND : ATA_COMMAND_TRUSTED_RECEIVE;
- AtaCommandBlock.AtaSectorCount = ( UINT8 )BufferSizeBlocks;
- AtaCommandBlock.AtaSectorNumber = ( UINT8 )( BufferSizeBlocks >> 8 );
- AtaCommandBlock.AtaFeatures = SecurityProtocol;
- AtaCommandBlock.AtaCylinderLow = ( UINT8 )( SpSpecific >> 8 );
- AtaCommandBlock.AtaCylinderHigh = ( UINT8 )( SpSpecific );
- AtaCommandBlock.AtaDeviceHead = ATA_DEVICE_LBA;
-
-
- ZeroMem( mBuffer, HDD_PAYLOAD );
- ASSERT( TransferLength <= HDD_PAYLOAD );
-
- if (IoType == OpalSend) {
- CopyMem( mBuffer, Buffer, TransferLength );
- }
-
- Status = AhciPioTransfer(
- &mAhciRegisters,
- (UINT8) SmmDev->SataPort,
- (UINT8) SmmDev->SataPortMultiplierPort,
- NULL,
- 0,
- ( IoType == OpalSend ) ? FALSE : TRUE, // i/o direction
- &AtaCommandBlock,
- NULL,
- mBuffer,
- (UINT32)TransferLength,
- ATA_TIMEOUT
- );
-
- if (IoType == OpalRecv) {
- CopyMem( Buffer, mBuffer, TransferLength );
- }
- } else if (SmmDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
- Status = NvmeSecuritySendReceive (
- &mNvmeContext,
- IoType == OpalSend,
- SecurityProtocol,
- SwapBytes16(SpSpecific),
- TransferLength,
- Buffer
- );
- } else {
- DEBUG((DEBUG_ERROR, "DeviceType(%x) not support.\n", SmmDev->DeviceType));
- }
-
- return Status;
-}
-
-/**
- Send a security protocol command to a device that receives data and/or the result
- of one or more commands sent by SendData.
-
- The ReceiveData function sends a security protocol command to the given MediaId.
- The security protocol command sent is defined by SecurityProtocolId and contains
- the security protocol specific data SecurityProtocolSpecificData. The function
- returns the data from the security protocol command in PayloadBuffer.
-
- For devices supporting the SCSI command set, the security protocol command is sent
- using the SECURITY PROTOCOL IN command defined in SPC-4.
-
- For devices supporting the ATA command set, the security protocol command is sent
- using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize
- is non-zero.
-
- If the PayloadBufferSize is zero, the security protocol command is sent using the
- Trusted Non-Data command defined in ATA8-ACS.
-
- If PayloadBufferSize is too small to store the available data from the security
- protocol command, the function shall copy PayloadBufferSize bytes into the
- PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
-
- If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
- the function shall return EFI_INVALID_PARAMETER.
-
- If the given MediaId does not support security protocol commands, the function shall
- return EFI_UNSUPPORTED. If there is no media in the device, the function returns
- EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
- the function returns EFI_MEDIA_CHANGED.
-
- If the security protocol fails to complete within the Timeout period, the function
- shall return EFI_TIMEOUT.
-
- If the security protocol command completes without an error, the function shall
- return EFI_SUCCESS. If the security protocol command completes with an error, the
- function shall return EFI_DEVICE_ERROR.
-
- @param This Indicates a pointer to the calling context.
- @param MediaId ID of the medium to receive data from.
- @param Timeout The timeout, in 100ns units, to use for the execution
- of the security protocol command. A Timeout value of 0
- means that this function will wait indefinitely for the
- security protocol command to execute. If Timeout is greater
- than zero, then this function will return EFI_TIMEOUT
- if the time required to execute the receive data command
- is greater than Timeout.
- @param SecurityProtocolId The value of the "Security Protocol" parameter of
- the security protocol command to be sent.
- @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
- of the security protocol command to be sent.
- @param PayloadBufferSize Size in bytes of the payload data buffer.
- @param PayloadBuffer A pointer to a destination buffer to store the security
- protocol command specific payload data for the security
- protocol command. The caller is responsible for having
- either implicit or explicit ownership of the buffer.
- @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
- data written to the payload data buffer.
-
- @retval EFI_SUCCESS The security protocol command completed successfully.
- @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
- data from the device. The PayloadBuffer contains the truncated data.
- @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
- @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
- @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
- PayloadBufferSize is non-zero.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the security
- protocol command to execute.
-
-**/
-EFI_STATUS
-EFIAPI
-SecurityReceiveData (
- IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Timeout,
- IN UINT8 SecurityProtocolId,
- IN UINT16 SecurityProtocolSpecificData,
- IN UINTN PayloadBufferSize,
- OUT VOID *PayloadBuffer,
- OUT UINTN *PayloadTransferSize
- )
-{
- OPAL_SMM_DEVICE *SmmDev;
-
- SmmDev = OPAL_SMM_DEVICE_FROM_THIS (This);
- if (SmmDev == NULL) {
- return EFI_DEVICE_ERROR;
- }
-
- return PerformTrustedIo (
- SmmDev,
- OpalRecv,
- SecurityProtocolId,
- SecurityProtocolSpecificData,
- PayloadBufferSize,
- PayloadBuffer
- );
-}
-
-/**
- Send a security protocol command to a device.
-
- The SendData function sends a security protocol command containing the payload
- PayloadBuffer to the given MediaId. The security protocol command sent is
- defined by SecurityProtocolId and contains the security protocol specific data
- SecurityProtocolSpecificData. If the underlying protocol command requires a
- specific padding for the command payload, the SendData function shall add padding
- bytes to the command payload to satisfy the padding requirements.
-
- For devices supporting the SCSI command set, the security protocol command is sent
- using the SECURITY PROTOCOL OUT command defined in SPC-4.
-
- For devices supporting the ATA command set, the security protocol command is sent
- using one of the TRUSTED SEND commands defined in ATA8-ACS if PayloadBufferSize
- is non-zero. If the PayloadBufferSize is zero, the security protocol command is
- sent using the Trusted Non-Data command defined in ATA8-ACS.
-
- If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
- return EFI_INVALID_PARAMETER.
-
- If the given MediaId does not support security protocol commands, the function
- shall return EFI_UNSUPPORTED. If there is no media in the device, the function
- returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
- device, the function returns EFI_MEDIA_CHANGED.
-
- If the security protocol fails to complete within the Timeout period, the function
- shall return EFI_TIMEOUT.
-
- If the security protocol command completes without an error, the function shall return
- EFI_SUCCESS. If the security protocol command completes with an error, the function
- shall return EFI_DEVICE_ERROR.
-
- @param This Indicates a pointer to the calling context.
- @param MediaId ID of the medium to receive data from.
- @param Timeout The timeout, in 100ns units, to use for the execution
- of the security protocol command. A Timeout value of 0
- means that this function will wait indefinitely for the
- security protocol command to execute. If Timeout is greater
- than zero, then this function will return EFI_TIMEOUT
- if the time required to execute the send data command
- is greater than Timeout.
- @param SecurityProtocolId The value of the "Security Protocol" parameter of
- the security protocol command to be sent.
- @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
- of the security protocol command to be sent.
- @param PayloadBufferSize Size in bytes of the payload data buffer.
- @param PayloadBuffer A pointer to a destination buffer to store the security
- protocol command specific payload data for the security
- protocol command.
-
- @retval EFI_SUCCESS The security protocol command completed successfully.
- @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
- @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
- @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the security
- protocol command to execute.
-
-**/
-EFI_STATUS
-EFIAPI
-SecuritySendData (
- IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Timeout,
- IN UINT8 SecurityProtocolId,
- IN UINT16 SecurityProtocolSpecificData,
- IN UINTN PayloadBufferSize,
- IN VOID *PayloadBuffer
- )
-{
- OPAL_SMM_DEVICE *SmmDev;
-
- SmmDev = OPAL_SMM_DEVICE_FROM_THIS (This);
- if (SmmDev == NULL) {
- return EFI_DEVICE_ERROR;
- }
-
- return PerformTrustedIo (
- SmmDev,
- OpalSend,
- SecurityProtocolId,
- SecurityProtocolSpecificData,
- PayloadBufferSize,
- PayloadBuffer
- );
-
-}
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.h b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.h
deleted file mode 100644
index ce88786fabc6..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/** @file
- Opal password smm driver which is used to support Opal security feature at s3 path.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _OPAL_PASSWORD_SMM_H_
-#define _OPAL_PASSWORD_SMM_H_
-
-#include <PiSmm.h>
-#include <IndustryStandard/Atapi.h>
-
-#include <Protocol/SmmSwDispatch2.h>
-#include <Protocol/SmmSxDispatch2.h>
-#include <Protocol/AtaPassThru.h>
-#include <Protocol/PciIo.h>
-#include <Protocol/SmmReadyToLock.h>
-#include <Protocol/SmmVariable.h>
-#include <Protocol/VariableLock.h>
-#include <Protocol/SmmEndOfDxe.h>
-#include <Protocol/StorageSecurityCommand.h>
-
-#include <Library/OpalPasswordSupportLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PcdLib.h>
-#include <Library/IoLib.h>
-#include <Library/TimerLib.h>
-#include <Library/PciLib.h>
-#include <Library/BaseLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/SmmServicesTableLib.h>
-#include <Library/MemoryAllocationLib.h>
-#include <Library/UefiDriverEntryPoint.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiRuntimeServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/S3BootScriptLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/DxeServicesTableLib.h>
-#include <Library/SmmIoLib.h>
-
-#include <IndustryStandard/Pci22.h>
-
-#include <Guid/OpalPasswordExtraInfoVariable.h>
-
-#include "OpalAhciMode.h"
-#include "OpalIdeMode.h"
-#include "OpalNvmeMode.h"
-
-//
-// Time out Value for ATA pass through protocol
-//
-#define ATA_TIMEOUT EFI_TIMER_PERIOD_SECONDS (3)
-
-//
-// The payload Length of HDD related ATA commands
-//
-#define HDD_PAYLOAD 512
-//
-// According to ATA spec, the max Length of hdd password is 32 bytes
-//
-#define OPAL_PASSWORD_MAX_LENGTH 32
-
-extern VOID *mBuffer;
-
-#pragma pack(1)
-
-typedef struct {
- UINT32 Address;
- S3_BOOT_SCRIPT_LIB_WIDTH Width;
-} OPAL_HC_PCI_REGISTER_SAVE;
-
-
-typedef struct {
- UINT32 SegNum;
- UINT32 BusNum;
- UINT32 DevNum;
- UINT32 FuncNum;
-} PCI_DEVICE;
-
-/**
-* Opal I/O Type utilized by the Trusted IO callback
-*
-* The type indicates if the I/O is a send or receive
-*/
-typedef enum {
- //
- // I/O is a TCG Trusted Send command
- //
- OpalSend,
-
- //
- // I/O is a TCG Trusted Receive command
- //
- OpalRecv
-} OPAL_IO_TYPE;
-
-
-#define OPAL_SMM_DEVICE_SIGNATURE SIGNATURE_32 ('o', 's', 'd', 's')
-
-typedef struct {
- UINTN Signature;
- LIST_ENTRY Link;
-
- EFI_STORAGE_SECURITY_COMMAND_PROTOCOL Sscp;
-
- UINT32 SegNum;
- UINT32 BusNum;
- UINT32 DevNum;
- UINT32 FuncNum;
-
- UINT8 DeviceType;
-
- UINT32 SataPort;
- UINT32 SataPortMultiplierPort;
-
- UINT32 NvmeNamespaceId;
-
- UINT8 Password[32];
- UINT8 PasswordLength;
-
- UINT32 Length;
- PCI_DEVICE *PciBridgeNode;
-
- UINT16 OpalBaseComId;
-} OPAL_SMM_DEVICE;
-
-#define OPAL_SMM_DEVICE_FROM_THIS(a) CR (a, OPAL_SMM_DEVICE, Sscp, OPAL_SMM_DEVICE_SIGNATURE)
-
-#pragma pack()
-
-/**
- Send a security protocol command to a device that receives data and/or the result
- of one or more commands sent by SendData.
-
- The ReceiveData function sends a security protocol command to the given MediaId.
- The security protocol command sent is defined by SecurityProtocolId and contains
- the security protocol specific data SecurityProtocolSpecificData. The function
- returns the data from the security protocol command in PayloadBuffer.
-
- For devices supporting the SCSI command set, the security protocol command is sent
- using the SECURITY PROTOCOL IN command defined in SPC-4.
-
- For devices supporting the ATA command set, the security protocol command is sent
- using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if PayloadBufferSize
- is non-zero.
-
- If the PayloadBufferSize is zero, the security protocol command is sent using the
- Trusted Non-Data command defined in ATA8-ACS.
-
- If PayloadBufferSize is too small to store the available data from the security
- protocol command, the function shall copy PayloadBufferSize bytes into the
- PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
-
- If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is non-zero,
- the function shall return EFI_INVALID_PARAMETER.
-
- If the given MediaId does not support security protocol commands, the function shall
- return EFI_UNSUPPORTED. If there is no media in the device, the function returns
- EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the device,
- the function returns EFI_MEDIA_CHANGED.
-
- If the security protocol fails to complete within the Timeout period, the function
- shall return EFI_TIMEOUT.
-
- If the security protocol command completes without an error, the function shall
- return EFI_SUCCESS. If the security protocol command completes with an error, the
- function shall return EFI_DEVICE_ERROR.
-
- @param This Indicates a pointer to the calling context.
- @param MediaId ID of the medium to receive data from.
- @param Timeout The timeout, in 100ns units, to use for the execution
- of the security protocol command. A Timeout value of 0
- means that this function will wait indefinitely for the
- security protocol command to execute. If Timeout is greater
- than zero, then this function will return EFI_TIMEOUT
- if the time required to execute the receive data command
- is greater than Timeout.
- @param SecurityProtocolId The value of the "Security Protocol" parameter of
- the security protocol command to be sent.
- @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
- of the security protocol command to be sent.
- @param PayloadBufferSize Size in bytes of the payload data buffer.
- @param PayloadBuffer A pointer to a destination buffer to store the security
- protocol command specific payload data for the security
- protocol command. The caller is responsible for having
- either implicit or explicit ownership of the buffer.
- @param PayloadTransferSize A pointer to a buffer to store the size in bytes of the
- data written to the payload data buffer.
-
- @retval EFI_SUCCESS The security protocol command completed successfully.
- @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was too small to store the available
- data from the device. The PayloadBuffer contains the truncated data.
- @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
- @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
- @retval EFI_INVALID_PARAMETER The PayloadBuffer or PayloadTransferSize is NULL and
- PayloadBufferSize is non-zero.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the security
- protocol command to execute.
-
-**/
-EFI_STATUS
-EFIAPI
-SecurityReceiveData (
- IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Timeout,
- IN UINT8 SecurityProtocolId,
- IN UINT16 SecurityProtocolSpecificData,
- IN UINTN PayloadBufferSize,
- OUT VOID *PayloadBuffer,
- OUT UINTN *PayloadTransferSize
- );
-
-/**
- Send a security protocol command to a device.
-
- The SendData function sends a security protocol command containing the payload
- PayloadBuffer to the given MediaId. The security protocol command sent is
- defined by SecurityProtocolId and contains the security protocol specific data
- SecurityProtocolSpecificData. If the underlying protocol command requires a
- specific padding for the command payload, the SendData function shall add padding
- bytes to the command payload to satisfy the padding requirements.
-
- For devices supporting the SCSI command set, the security protocol command is sent
- using the SECURITY PROTOCOL OUT command defined in SPC-4.
-
- For devices supporting the ATA command set, the security protocol command is sent
- using one of the TRUSTED SEND commands defined in ATA8-ACS if PayloadBufferSize
- is non-zero. If the PayloadBufferSize is zero, the security protocol command is
- sent using the Trusted Non-Data command defined in ATA8-ACS.
-
- If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
- return EFI_INVALID_PARAMETER.
-
- If the given MediaId does not support security protocol commands, the function
- shall return EFI_UNSUPPORTED. If there is no media in the device, the function
- returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
- device, the function returns EFI_MEDIA_CHANGED.
-
- If the security protocol fails to complete within the Timeout period, the function
- shall return EFI_TIMEOUT.
-
- If the security protocol command completes without an error, the function shall return
- EFI_SUCCESS. If the security protocol command completes with an error, the function
- shall return EFI_DEVICE_ERROR.
-
- @param This Indicates a pointer to the calling context.
- @param MediaId ID of the medium to receive data from.
- @param Timeout The timeout, in 100ns units, to use for the execution
- of the security protocol command. A Timeout value of 0
- means that this function will wait indefinitely for the
- security protocol command to execute. If Timeout is greater
- than zero, then this function will return EFI_TIMEOUT
- if the time required to execute the receive data command
- is greater than Timeout.
- @param SecurityProtocolId The value of the "Security Protocol" parameter of
- the security protocol command to be sent.
- @param SecurityProtocolSpecificData The value of the "Security Protocol Specific" parameter
- of the security protocol command to be sent.
- @param PayloadBufferSize Size in bytes of the payload data buffer.
- @param PayloadBuffer A pointer to a destination buffer to store the security
- protocol command specific payload data for the security
- protocol command.
-
- @retval EFI_SUCCESS The security protocol command completed successfully.
- @retval EFI_UNSUPPORTED The given MediaId does not support security protocol commands.
- @retval EFI_DEVICE_ERROR The security protocol command completed with an error.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
- @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and PayloadBufferSize is non-zero.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the security
- protocol command to execute.
-
-**/
-EFI_STATUS
-EFIAPI
-SecuritySendData (
- IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 Timeout,
- IN UINT8 SecurityProtocolId,
- IN UINT16 SecurityProtocolSpecificData,
- IN UINTN PayloadBufferSize,
- IN VOID *PayloadBuffer
- );
-
-#endif // _OPAL_PASSWORD_SMM_H_
-
diff --git a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf b/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf
deleted file mode 100644
index c62fa13271d8..000000000000
--- a/SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf
+++ /dev/null
@@ -1,77 +0,0 @@
-## @file
-# This is a Opal Password Smm driver.
-#
-# Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-##
-[Defines]
- INF_VERSION = 0x00010005
- BASE_NAME = OpalPasswordSmm
- FILE_GUID = 7D24A234-A8C2-4718-BF60-A2EF070F414E
- MODULE_TYPE = DXE_SMM_DRIVER
- VERSION_STRING = 1.0
- PI_SPECIFICATION_VERSION = 0x0001000A
- ENTRY_POINT = OpalPasswordSmmInit
-
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64 IPF EBC
-#
-
-[Sources]
- OpalPasswordSmm.c
- OpalPasswordSmm.h
- OpalAhciMode.c
- OpalAhciMode.h
- OpalIdeMode.c
- OpalIdeMode.h
- OpalNvmeMode.c
- OpalNvmeMode.h
- OpalNvmeReg.h
-
-[Packages]
- MdePkg/MdePkg.dec
- SecurityPkg/SecurityPkg.dec
- MdeModulePkg/MdeModulePkg.dec
-
-[LibraryClasses]
- UefiBootServicesTableLib
- UefiDriverEntryPoint
- UefiRuntimeServicesTableLib
- DebugLib
- IoLib
- PciLib
- BaseLib
- BaseMemoryLib
- SmmServicesTableLib
- MemoryAllocationLib
- UefiLib
- TimerLib
- S3BootScriptLib
- DxeServicesTableLib
- DevicePathLib
- OpalPasswordSupportLib
- SmmIoLib
-
-[Guids]
- gOpalExtraInfoVariableGuid ## CONSUMES ## GUID
-
-[Protocols]
- gEfiSmmSwDispatch2ProtocolGuid ## CONSUMES
- gEfiAtaPassThruProtocolGuid ## CONSUMES
- gEfiPciIoProtocolGuid ## CONSUMES
- gEfiSmmSxDispatch2ProtocolGuid ## CONSUMES
- gEfiSmmVariableProtocolGuid ## CONSUMES
- gEfiStorageSecurityCommandProtocolGuid ## CONSUMES
-
-[Depex]
- gEfiSmmSwDispatch2ProtocolGuid AND
- gEfiSmmSxDispatch2ProtocolGuid AND
- gEfiSmmVariableProtocolGuid
--
2.7.0.windows.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 6/7] SecurityPkg OpalPasswordSupportLib: Remove it
2018-03-07 13:19 [PATCH V2 0/7] OpalPassword: New solution without SMM device code Star Zeng
` (4 preceding siblings ...)
2018-03-07 13:19 ` [PATCH V2 5/7] SecurityPkg OpalPassword: Remove old solution Star Zeng
@ 2018-03-07 13:19 ` Star Zeng
2018-03-07 13:19 ` [PATCH V2 7/7] SecurityPkg OpalPasswordExtraInfoVariable.h: " Star Zeng
6 siblings, 0 replies; 10+ messages in thread
From: Star Zeng @ 2018-03-07 13:19 UTC (permalink / raw)
To: edk2-devel; +Cc: Star Zeng, Jiewen Yao, Eric Dong, Chao Zhang
Remove OpalPasswordSupportLib as it is not been used
anymore.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
---
.../Include/Library/OpalPasswordSupportLib.h | 289 --------
.../OpalPasswordSupportLib.c | 781 ---------------------
.../OpalPasswordSupportLib.inf | 55 --
.../OpalPasswordSupportNotify.h | 55 --
SecurityPkg/SecurityPkg.dec | 4 -
SecurityPkg/SecurityPkg.dsc | 2 -
6 files changed, 1186 deletions(-)
delete mode 100644 SecurityPkg/Include/Library/OpalPasswordSupportLib.h
delete mode 100644 SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.c
delete mode 100644 SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.inf
delete mode 100644 SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportNotify.h
diff --git a/SecurityPkg/Include/Library/OpalPasswordSupportLib.h b/SecurityPkg/Include/Library/OpalPasswordSupportLib.h
deleted file mode 100644
index e616c763f05c..000000000000
--- a/SecurityPkg/Include/Library/OpalPasswordSupportLib.h
+++ /dev/null
@@ -1,289 +0,0 @@
-/** @file
- Header file of Opal password support library.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-
-#ifndef _OPAL_PASSWORD_SUPPORT_LIB_H_
-#define _OPAL_PASSWORD_SUPPORT_LIB_H_
-
-#include <Protocol/DevicePath.h>
-#include <Library/TcgStorageOpalLib.h>
-
-
-#pragma pack(1)
-
-//
-// Structure that is used to represent the available actions for an OpalDisk.
-// The data can then be utilized to expose/hide certain actions available to an end user
-// by the consumer of this library.
-//
-typedef struct {
- //
- // Indicates if the disk can support PSID Revert action. should verify disk supports PSID authority
- //
- UINT16 PsidRevert : 1;
-
- //
- // Indicates if the disk can support Revert action
- //
- UINT16 Revert : 1;
-
- //
- // Indicates if the user must keep data for revert action. It is true if no media encryption is supported.
- //
- UINT16 RevertKeepDataForced : 1;
-
- //
- // Indicates if the disk can support set Admin password
- //
- UINT16 AdminPass : 1;
-
- //
- // Indicates if the disk can support set User password. This action requires that a user
- // password is first enabled.
- //
- UINT16 UserPass : 1;
-
- //
- // Indicates if unlock action is available. Requires disk to be currently locked.
- //
- UINT16 Unlock : 1;
-
- //
- // Indicates if Secure Erase action is available. Action requires admin credentials and media encryption support.
- //
- UINT16 SecureErase : 1;
-
- //
- // Indicates if Disable User action is available. Action requires admin credentials.
- //
- UINT16 DisableUser : 1;
-} OPAL_DISK_ACTIONS;
-
-//
-// Structure that is used to represent the Opal device with password info.
-//
-typedef struct {
- LIST_ENTRY Link;
-
- UINT8 Password[32];
- UINT8 PasswordLength;
-
- EFI_DEVICE_PATH_PROTOCOL OpalDevicePath;
-} OPAL_DISK_AND_PASSWORD_INFO;
-
-#pragma pack()
-
-/**
-
- The function performs determines the available actions for the OPAL_DISK provided.
-
- @param[in] SupportedAttributes The support attribute for the device.
- @param[in] LockingFeature The locking status for the device.
- @param[in] OwnerShip The ownership for the device.
- @param[out] AvalDiskActions Pointer to fill-out with appropriate disk actions.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportGetAvailableActions(
- IN OPAL_DISK_SUPPORT_ATTRIBUTE *SupportedAttributes,
- IN TCG_LOCKING_FEATURE_DESCRIPTOR *LockingFeature,
- IN UINT16 OwnerShip,
- OUT OPAL_DISK_ACTIONS *AvalDiskActions
- );
-
-/**
- Enable Opal Feature for the input device.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Msid Msid
- @param[in] MsidLength Msid Length
- @param[in] Password Admin password
- @param[in] PassLength Length of password in bytes
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportEnableOpalFeature(
- IN OPAL_SESSION *Session,
- IN VOID *Msid,
- IN UINT32 MsidLength,
- IN VOID *Password,
- IN UINT32 PassLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-/**
- Creates a session with OPAL_UID_ADMIN_SP as OPAL_ADMIN_SP_PSID_AUTHORITY, then reverts device using Admin SP Revert method.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Psid PSID of device to revert.
- @param[in] PsidLength Length of PSID in bytes.
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportPsidRevert(
- IN OPAL_SESSION *Session,
- IN VOID *Psid,
- IN UINT32 PsidLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-/**
- Opens a session with OPAL_UID_ADMIN_SP as OPAL_ADMIN_SP_PSID_AUTHORITY, then reverts the device using the RevertSP method.
-
- @param[in] Session The opal session for the opal device.
- @param[in] KeepUserData TRUE to keep existing Data on the disk, or FALSE to erase it
- @param[in] Password Admin password
- @param[in] PasswordLength Length of password in bytes
- @param[in] Msid Msid
- @param[in] MsidLength Msid Length
- @param[out] PasswordFailed indicates if password failed (start session didn't work)
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportRevert(
- IN OPAL_SESSION *Session,
- IN BOOLEAN KeepUserData,
- IN VOID *Password,
- IN UINT32 PasswordLength,
- IN VOID *Msid,
- IN UINT32 MsidLength,
- OUT BOOLEAN *PasswordFailed,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-/**
- Set new password.
-
- @param[in] Session The opal session for the opal device.
- @param[in] OldPassword Current admin password
- @param[in] OldPasswordLength Length of current admin password in bytes
- @param[in] NewPassword New admin password to set
- @param[in] NewPasswordLength Length of new password in bytes
- @param[in] DevicePath The device path for the opal devcie.
- @param[in] SetAdmin Whether set admin password or user password.
- TRUE for admin, FALSE for user.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportSetPassword(
- IN OPAL_SESSION *Session,
- IN VOID *OldPassword,
- IN UINT32 OldPasswordLength,
- IN VOID *NewPassword,
- IN UINT32 NewPasswordLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- IN BOOLEAN SetAdmin
- );
-
-/**
- Starts a session with OPAL_UID_LOCKING_SP as OPAL_LOCKING_SP_ADMIN1_AUTHORITY and disables the User1 authority.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Password Admin password
- @param[in] PasswordLength Length of password in bytes
- @param[out] PasswordFailed Indicates if password failed (start session didn't work)
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportDisableUser(
- IN OPAL_SESSION *Session,
- IN VOID *Password,
- IN UINT32 PasswordLength,
- OUT BOOLEAN *PasswordFailed,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-/**
- Starts a session with OPAL_UID_LOCKING_SP as OPAL_LOCKING_SP_USER1_AUTHORITY or OPAL_LOCKING_SP_ADMIN1_AUTHORITY
- and updates the global locking range ReadLocked and WriteLocked columns to FALSE.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Password Admin or user password
- @param[in] PasswordLength Length of password in bytes
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportUnlock(
- IN OPAL_SESSION *Session,
- IN VOID *Password,
- IN UINT32 PasswordLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-/**
- Starts a session with OPAL_UID_LOCKING_SP as OPAL_LOCKING_SP_USER1_AUTHORITY or OPAL_LOCKING_SP_ADMIN1_AUTHORITY
- and updates the global locking range ReadLocked and WriteLocked columns to TRUE.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Password Admin or user password
- @param[in] PasswordLength Length of password in bytes
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportLock(
- IN OPAL_SESSION *Session,
- IN VOID *Password,
- IN UINT32 PasswordLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- );
-
-/**
- Check if the password is full zero.
-
- @param[in] Password Points to the Data Buffer
-
- @retval TRUE This password string is full zero.
- @retval FALSE This password string is not full zero.
-
-**/
-LIST_ENTRY *
-EFIAPI
-OpalSupportGetOpalDeviceList (
- VOID
- );
-
-/**
- Transfer the password to the smm driver.
-
- @param[in] DevicePath The device path for the opal devcie.
- @param PasswordLen The input password length.
- @param Password Input password buffer.
-
- @retval EFI_SUCCESS Do the required action success.
- @retval Others Error occured.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalSupportSendPasword(
- EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- UINTN PasswordLen,
- VOID *Password
- );
-
-#endif // _OPAL_CORE_H_
diff --git a/SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.c b/SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.c
deleted file mode 100644
index 837582359e4f..000000000000
--- a/SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.c
+++ /dev/null
@@ -1,781 +0,0 @@
-/** @file
- Implementation of Opal password support library.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "OpalPasswordSupportNotify.h"
-
-#define OPAL_PASSWORD_MAX_LENGTH 32
-
-LIST_ENTRY mDeviceList = INITIALIZE_LIST_HEAD_VARIABLE (mDeviceList);
-BOOLEAN gInSmm = FALSE;
-EFI_GUID gOpalPasswordNotifyProtocolGuid = OPAL_PASSWORD_NOTIFY_PROTOCOL_GUID;
-
-/**
-
- The function performs determines the available actions for the OPAL_DISK provided.
-
- @param[in] SupportedAttributes The support attribute for the device.
- @param[in] LockingFeature The locking status for the device.
- @param[in] OwnerShip The ownership for the device.
- @param[out] AvalDiskActions Pointer to fill-out with appropriate disk actions.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportGetAvailableActions(
- IN OPAL_DISK_SUPPORT_ATTRIBUTE *SupportedAttributes,
- IN TCG_LOCKING_FEATURE_DESCRIPTOR *LockingFeature,
- IN UINT16 OwnerShip,
- OUT OPAL_DISK_ACTIONS *AvalDiskActions
- )
-{
- BOOLEAN ExistingPassword;
-
- NULL_CHECK(AvalDiskActions);
-
- AvalDiskActions->AdminPass = 1;
- AvalDiskActions->UserPass = 0;
- AvalDiskActions->DisableUser = 0;
- AvalDiskActions->Unlock = 0;
-
- //
- // Revert is performed on locking sp, so only allow if locking sp is enabled
- //
- if (LockingFeature->LockingEnabled) {
- AvalDiskActions->Revert = 1;
- }
-
- //
- // Psid revert is available for any device with media encryption support
- // Revert is allowed for any device with media encryption support, however it requires
- //
- if (SupportedAttributes->MediaEncryption) {
-
- //
- // Only allow psid revert if media encryption is enabled.
- // Otherwise, someone who steals a disk can psid revert the disk and the user Data is still
- // intact and accessible
- //
- AvalDiskActions->PsidRevert = 1;
- AvalDiskActions->RevertKeepDataForced = 0;
-
- //
- // Secure erase is performed by generating a new encryption key
- // this is only available is encryption is supported
- //
- AvalDiskActions->SecureErase = 1;
- } else {
- AvalDiskActions->PsidRevert = 0;
- AvalDiskActions->SecureErase = 0;
-
- //
- // If no media encryption is supported, then a revert (using password) will not
- // erase the Data (since you can't generate a new encryption key)
- //
- AvalDiskActions->RevertKeepDataForced = 1;
- }
-
- if (LockingFeature->Locked) {
- AvalDiskActions->Unlock = 1;
- } else {
- AvalDiskActions->Unlock = 0;
- }
-
- //
- // Only allow user to set password if an admin password exists
- //
- ExistingPassword = OpalUtilAdminPasswordExists(OwnerShip, LockingFeature);
- AvalDiskActions->UserPass = ExistingPassword;
-
- //
- // This will still show up even if there isn't a user, which is fine
- //
- AvalDiskActions->DisableUser = ExistingPassword;
-
- return TcgResultSuccess;
-}
-
-/**
- Creates a session with OPAL_UID_ADMIN_SP as OPAL_ADMIN_SP_PSID_AUTHORITY, then reverts device using Admin SP Revert method.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Psid PSID of device to revert.
- @param[in] PsidLength Length of PSID in bytes.
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportPsidRevert(
- IN OPAL_SESSION *Session,
- IN VOID *Psid,
- IN UINT32 PsidLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- TCG_RESULT Ret;
-
- NULL_CHECK(Session);
- NULL_CHECK(Psid);
-
- Ret = OpalUtilPsidRevert (Session, Psid, PsidLength);
- if (Ret == TcgResultSuccess && !gInSmm) {
- OpalSupportSendPasword (DevicePath, 0, NULL);
- }
-
- return Ret;
-}
-
-/**
- Opens a session with OPAL_UID_ADMIN_SP as OPAL_ADMIN_SP_SID_AUTHORITY,
- sets OPAL_UID_ADMIN_SP_C_PIN_SID with the new password,
- and sets OPAL_LOCKING_SP_C_PIN_ADMIN1 with the new password.
-
- @param[in] Session The opal session for the opal device.
- @param[in] OldPassword Current admin password
- @param[in] OldPasswordLength Length of current admin password in bytes
- @param[in] NewPassword New admin password to set
- @param[in] NewPasswordLength Length of new password in bytes
- @param[in] DevicePath The device path for the opal devcie.
- @param[in] SetAdmin Whether set admin password or user password.
- TRUE for admin, FALSE for user.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportSetPassword(
- IN OPAL_SESSION *Session,
- IN VOID *OldPassword,
- IN UINT32 OldPasswordLength,
- IN VOID *NewPassword,
- IN UINT32 NewPasswordLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- IN BOOLEAN SetAdmin
- )
-{
- TCG_RESULT Ret;
-
- NULL_CHECK(Session);
- NULL_CHECK(OldPassword);
- NULL_CHECK(NewPassword);
-
- if (SetAdmin) {
- Ret = OpalUtilSetAdminPassword(Session, OldPassword, OldPasswordLength, NewPassword, NewPasswordLength);
- } else {
- Ret = OpalUtilSetUserPassword(Session, OldPassword, OldPasswordLength, NewPassword, NewPasswordLength);
- }
- if (Ret == TcgResultSuccess && !gInSmm) {
- OpalSupportSendPasword (DevicePath, NewPasswordLength, NewPassword);
- }
-
- return Ret;
-}
-
-/**
- Starts a session with OPAL_UID_LOCKING_SP as OPAL_LOCKING_SP_ADMIN1_AUTHORITY and disables the User1 authority.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Password Admin password
- @param[in] PasswordLength Length of password in bytes
- @param[out] PasswordFailed Indicates if password failed (start session didn't work)
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportDisableUser(
- IN OPAL_SESSION *Session,
- IN VOID *Password,
- IN UINT32 PasswordLength,
- OUT BOOLEAN *PasswordFailed,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- TCG_RESULT Ret;
-
- NULL_CHECK(Session);
- NULL_CHECK(Password);
- NULL_CHECK(PasswordFailed);
-
- Ret = OpalUtilDisableUser(Session, Password, PasswordLength, PasswordFailed);
- if (Ret == TcgResultSuccess && !gInSmm) {
- OpalSupportSendPasword (DevicePath, PasswordLength, Password);
- }
-
- return Ret;
-}
-
-/**
- Enable Opal Feature for the input device.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Msid Msid
- @param[in] MsidLength Msid Length
- @param[in] Password Admin password
- @param[in] PassLength Length of password in bytes
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportEnableOpalFeature (
- IN OPAL_SESSION *Session,
- IN VOID *Msid,
- IN UINT32 MsidLength,
- IN VOID *Password,
- IN UINT32 PassLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- TCG_RESULT Ret;
-
- NULL_CHECK(Session);
- NULL_CHECK(Msid);
- NULL_CHECK(Password);
-
- Ret = OpalUtilSetAdminPasswordAsSid(
- Session,
- Msid,
- MsidLength,
- Password,
- PassLength
- );
- if (Ret == TcgResultSuccess) {
- //
- // Enable global locking range
- //
- Ret = OpalUtilSetOpalLockingRange(
- Session,
- Password,
- PassLength,
- OPAL_LOCKING_SP_LOCKING_GLOBALRANGE,
- 0,
- 0,
- TRUE,
- TRUE,
- FALSE,
- FALSE
- );
- }
-
- if (Ret == TcgResultSuccess && !gInSmm) {
- OpalSupportSendPasword (DevicePath, PassLength, Password);
- }
-
- return Ret;
-}
-
-/**
- Opens a session with OPAL_UID_ADMIN_SP as OPAL_ADMIN_SP_PSID_AUTHORITY, then reverts the device using the RevertSP method.
-
- @param[in] Session The opal session for the opal device.
- @param[in] KeepUserData TRUE to keep existing Data on the disk, or FALSE to erase it
- @param[in] Password Admin password
- @param[in] PasswordLength Length of password in bytes
- @param[in] Msid Msid
- @param[in] MsidLength Msid Length
- @param[out] PasswordFailed indicates if password failed (start session didn't work)
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportRevert(
- IN OPAL_SESSION *Session,
- IN BOOLEAN KeepUserData,
- IN VOID *Password,
- IN UINT32 PasswordLength,
- IN VOID *Msid,
- IN UINT32 MsidLength,
- OUT BOOLEAN *PasswordFailed,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- TCG_RESULT Ret;
-
- NULL_CHECK(Session);
- NULL_CHECK(Password);
- NULL_CHECK(Msid);
- NULL_CHECK(PasswordFailed);
-
- Ret = OpalUtilRevert(Session, KeepUserData, Password, PasswordLength, PasswordFailed, Msid, MsidLength);
- if (Ret == TcgResultSuccess && !gInSmm) {
- OpalSupportSendPasword (DevicePath, 0, NULL);
- }
-
- return Ret;
-}
-
-/**
- Starts a session with OPAL_UID_LOCKING_SP as OPAL_LOCKING_SP_USER1_AUTHORITY or OPAL_LOCKING_SP_ADMIN1_AUTHORITY
- and updates the global locking range ReadLocked and WriteLocked columns to FALSE.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Password Admin or user password
- @param[in] PasswordLength Length of password in bytes
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportUnlock(
- IN OPAL_SESSION *Session,
- IN VOID *Password,
- IN UINT32 PasswordLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- TCG_RESULT Ret;
-
- NULL_CHECK(Session);
- NULL_CHECK(Password);
-
- Ret = OpalUtilUpdateGlobalLockingRange(Session, Password, PasswordLength, FALSE, FALSE);
- if (Ret == TcgResultSuccess && !gInSmm) {
- OpalSupportSendPasword (DevicePath, PasswordLength, Password);
- }
-
- return Ret;
-}
-
-/**
- Starts a session with OPAL_UID_LOCKING_SP as OPAL_LOCKING_SP_USER1_AUTHORITY or OPAL_LOCKING_SP_ADMIN1_AUTHORITY
- and updates the global locking range ReadLocked and WriteLocked columns to TRUE.
-
- @param[in] Session The opal session for the opal device.
- @param[in] Password Admin or user password
- @param[in] PasswordLength Length of password in bytes
- @param[in] DevicePath The device path for the opal devcie.
-
-**/
-TCG_RESULT
-EFIAPI
-OpalSupportLock(
- IN OPAL_SESSION *Session,
- IN VOID *Password,
- IN UINT32 PasswordLength,
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
- )
-{
- TCG_RESULT Ret;
-
- NULL_CHECK(Session);
- NULL_CHECK(Password);
-
- Ret = OpalUtilUpdateGlobalLockingRange(Session, Password, PasswordLength, TRUE, TRUE);
- if (Ret == TcgResultSuccess && !gInSmm) {
- OpalSupportSendPasword (DevicePath, PasswordLength, Password);
- }
-
- return Ret;
-}
-
-/**
- Initialize the communicate Buffer using DataSize and Function.
-
- @param[out] DataPtr Points to the Data in the communicate Buffer.
- @param[in] DataSize The Data Size to send to SMM.
- @param[in] Function The function number to initialize the communicate Header.
-
- @retval EFI_INVALID_PARAMETER The Data Size is too big.
- @retval EFI_SUCCESS Find the specified variable.
-
-**/
-VOID*
-OpalInitCommunicateBuffer (
- OUT VOID **DataPtr OPTIONAL,
- IN UINTN DataSize,
- IN UINTN Function
- )
-{
- EFI_SMM_COMMUNICATE_HEADER *SmmCommunicateHeader;
- OPAL_SMM_COMMUNICATE_HEADER *SmmFunctionHeader;
- VOID *Buffer;
- EDKII_PI_SMM_COMMUNICATION_REGION_TABLE *SmmCommRegionTable;
- EFI_MEMORY_DESCRIPTOR *SmmCommMemRegion;
- UINTN Index;
- UINTN Size;
- EFI_STATUS Status;
-
- Buffer = NULL;
- Status = EfiGetSystemConfigurationTable (
- &gEdkiiPiSmmCommunicationRegionTableGuid,
- (VOID **) &SmmCommRegionTable
- );
- if (EFI_ERROR (Status)) {
- return NULL;
- }
-
- ASSERT (SmmCommRegionTable != NULL);
- SmmCommMemRegion = (EFI_MEMORY_DESCRIPTOR *) (SmmCommRegionTable + 1);
- Size = 0;
- for (Index = 0; Index < SmmCommRegionTable->NumberOfEntries; Index++) {
- if (SmmCommMemRegion->Type == EfiConventionalMemory) {
- Size = EFI_PAGES_TO_SIZE ((UINTN) SmmCommMemRegion->NumberOfPages);
- if (Size >= (DataSize + OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data) + OFFSET_OF (OPAL_SMM_COMMUNICATE_HEADER, Data))) {
- break;
- }
- }
- SmmCommMemRegion = (EFI_MEMORY_DESCRIPTOR *) ((UINT8 *) SmmCommMemRegion + SmmCommRegionTable->DescriptorSize);
- }
- ASSERT (Index < SmmCommRegionTable->NumberOfEntries);
-
- Buffer = (VOID*)(UINTN)SmmCommMemRegion->PhysicalStart;
- ASSERT (Buffer != NULL);
-
- SmmCommunicateHeader = (EFI_SMM_COMMUNICATE_HEADER *) Buffer;
- CopyGuid (&SmmCommunicateHeader->HeaderGuid, &gOpalPasswordNotifyProtocolGuid);
- SmmCommunicateHeader->MessageLength = DataSize + OFFSET_OF (OPAL_SMM_COMMUNICATE_HEADER, Data);
-
- SmmFunctionHeader = (OPAL_SMM_COMMUNICATE_HEADER *) SmmCommunicateHeader->Data;
- SmmFunctionHeader->Function = Function;
- if (DataPtr != NULL) {
- *DataPtr = SmmFunctionHeader->Data;
- }
-
- return Buffer;
-}
-
-/**
- Send the Data in communicate Buffer to SMM.
-
- @param[in] Buffer Points to the Data in the communicate Buffer.
- @param[in] DataSize This Size of the function Header and the Data.
-
- @retval EFI_SUCCESS Success is returned from the functin in SMM.
- @retval Others Failure is returned from the function in SMM.
-
-**/
-EFI_STATUS
-OpalSendCommunicateBuffer (
- IN VOID *Buffer,
- IN UINTN DataSize
- )
-{
- EFI_STATUS Status;
- UINTN CommSize;
- EFI_SMM_COMMUNICATE_HEADER *SmmCommunicateHeader;
- OPAL_SMM_COMMUNICATE_HEADER *SmmFunctionHeader;
- EFI_SMM_COMMUNICATION_PROTOCOL *SmmCommunication;
-
- Status = gBS->LocateProtocol (&gEfiSmmCommunicationProtocolGuid, NULL, (VOID **) &SmmCommunication);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- CommSize = DataSize + OFFSET_OF (EFI_SMM_COMMUNICATE_HEADER, Data) + OFFSET_OF (OPAL_SMM_COMMUNICATE_HEADER, Data);
- Status = SmmCommunication->Communicate (SmmCommunication, Buffer, &CommSize);
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- SmmCommunicateHeader = (EFI_SMM_COMMUNICATE_HEADER *) Buffer;
- SmmFunctionHeader = (OPAL_SMM_COMMUNICATE_HEADER *)SmmCommunicateHeader->Data;
-
- return SmmFunctionHeader->ReturnStatus;
-}
-
-/**
- Transfer the password to the smm driver.
-
- @param[in] DevicePath The device path for the opal devcie.
- @param PasswordLen The input password length.
- @param Password Input password buffer.
-
- @retval EFI_SUCCESS Do the required action success.
- @retval Others Error occured.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalSupportSendPasword(
- EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- UINTN PasswordLen,
- VOID *Password
- )
-{
- OPAL_COMM_DEVICE_LIST *Parameter;
- VOID *Buffer;
- UINTN Length;
- EFI_STATUS Status;
- UINTN DevicePathLen;
-
- Parameter = NULL;
- Buffer = NULL;
-
- if (DevicePath == NULL) {
- //
- // Assume DevicePath == NULL only when library used by SMM driver
- // and should not run to here, just return success.
- //
- return EFI_SUCCESS;
- }
-
- DevicePathLen = GetDevicePathSize (DevicePath);
- Length = OFFSET_OF (OPAL_COMM_DEVICE_LIST, OpalDevicePath) + DevicePathLen;
- Buffer = OpalInitCommunicateBuffer((VOID**)&Parameter, Length, SMM_FUNCTION_SET_OPAL_PASSWORD);
- if (Buffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- if (Password != NULL) {
- CopyMem((VOID*)Parameter->Password, Password, PasswordLen);
- Parameter->PasswordLength = (UINT8)PasswordLen;
- }
- CopyMem (&Parameter->OpalDevicePath, DevicePath, DevicePathLen);
-
- Status = OpalSendCommunicateBuffer(Buffer, Length);
- if (EFI_ERROR(Status)) {
- goto EXIT;
- }
-
-EXIT:
- ZeroMem(Parameter, Length);
- return Status;
-}
-
-/**
- Get saved Opal device list.
-
- @retval return opal device list.
-
-**/
-LIST_ENTRY*
-EFIAPI
-OpalSupportGetOpalDeviceList (
- VOID
- )
-{
- return &mDeviceList;
-}
-
-/**
- Check if the password is full zero.
-
- @param[in] Password Points to the Data Buffer
-
- @retval TRUE This password string is full zero.
- @retval FALSE This password string is not full zero.
-
-**/
-BOOLEAN
-OpalPasswordIsFullZero (
- IN UINT8 *Password
- )
-{
- UINTN Index;
-
- for (Index = 0; Index < OPAL_PASSWORD_MAX_LENGTH; Index++) {
- if (Password[Index] != 0) {
- return FALSE;
- }
- }
-
- return TRUE;
-}
-
-/**
- Save hdd password to SMM.
-
- @param[in] DevicePath Input device path info for the device.
- @param[in] Password The hdd password of attached ATA device.
- @param[in] PasswordLength The hdd password length.
-
- @retval EFI_OUT_OF_RESOURCES Insufficient resources to create database record
- @retval EFI_SUCCESS The function has been successfully executed.
-
-**/
-EFI_STATUS
-OpalSavePasswordToSmm (
- IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
- IN UINT8 *Password,
- IN UINT8 PasswordLength
- )
-{
- OPAL_DISK_AND_PASSWORD_INFO *List;
- OPAL_DISK_AND_PASSWORD_INFO *Dev;
- LIST_ENTRY *Entry;
- UINTN DevicePathLen;
-
- DevicePathLen = GetDevicePathSize (DevicePath);
-
- for (Entry = mDeviceList.ForwardLink; Entry != &mDeviceList; Entry = Entry->ForwardLink) {
- List = BASE_CR (Entry, OPAL_DISK_AND_PASSWORD_INFO, Link);
- if (CompareMem (&List->OpalDevicePath, DevicePath, DevicePathLen) == 0) {
- CopyMem(List->Password, Password, OPAL_PASSWORD_MAX_LENGTH);
- return EFI_SUCCESS;
- }
- }
-
- Dev = AllocateZeroPool (OFFSET_OF (OPAL_DISK_AND_PASSWORD_INFO, OpalDevicePath) + DevicePathLen);
- if (Dev == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- Dev->PasswordLength = PasswordLength;
- CopyMem(&(Dev->Password), Password, OPAL_PASSWORD_MAX_LENGTH);
- CopyMem(&(Dev->OpalDevicePath), DevicePath, DevicePathLen);
-
- InsertHeadList (&mDeviceList, &Dev->Link);
-
- return EFI_SUCCESS;
-}
-
-/**
- Communication service SMI Handler entry.
-
- This SMI handler provides services for saving HDD password and saving S3 boot script when ready to boot.
-
- @param[in] DispatchHandle The unique handle assigned to this handler by SmiHandlerRegister().
- @param[in] RegisterContext Points to an optional handler context which was specified when the
- handler was registered.
- @param[in, out] CommBuffer A pointer to a collection of Data in memory that will
- be conveyed from a non-SMM environment into an SMM environment.
- @param[in, out] CommBufferSize The Size of the CommBuffer.
-
- @retval EFI_SUCCESS The interrupt was handled and quiesced. No other handlers
- should still be called.
- @retval EFI_WARN_INTERRUPT_SOURCE_QUIESCED The interrupt has been quiesced but other handlers should
- still be called.
- @retval EFI_WARN_INTERRUPT_SOURCE_PENDING The interrupt is still pending and other handlers should still
- be called.
- @retval EFI_INTERRUPT_PENDING The interrupt could not be quiesced.
-**/
-EFI_STATUS
-EFIAPI
-SmmOpalPasswordHandler (
- IN EFI_HANDLE DispatchHandle,
- IN CONST VOID *RegisterContext,
- IN OUT VOID *CommBuffer,
- IN OUT UINTN *CommBufferSize
- )
-{
- EFI_STATUS Status;
- OPAL_SMM_COMMUNICATE_HEADER *SmmFunctionHeader;
- UINTN TempCommBufferSize;
- UINT8 *NewPassword;
- UINT8 PasswordLength;
- EFI_DEVICE_PATH_PROTOCOL *DevicePath;
-
- if (CommBuffer == NULL || CommBufferSize == NULL) {
- return EFI_SUCCESS;
- }
-
- TempCommBufferSize = *CommBufferSize;
- if (TempCommBufferSize < OFFSET_OF (OPAL_SMM_COMMUNICATE_HEADER, Data)) {
- return EFI_SUCCESS;
- }
-
- Status = EFI_SUCCESS;
- SmmFunctionHeader = (OPAL_SMM_COMMUNICATE_HEADER *)CommBuffer;
-
- DevicePath = &((OPAL_COMM_DEVICE_LIST*)(SmmFunctionHeader->Data))->OpalDevicePath;
- PasswordLength = ((OPAL_COMM_DEVICE_LIST*)(SmmFunctionHeader->Data))->PasswordLength;
- NewPassword = ((OPAL_COMM_DEVICE_LIST*)(SmmFunctionHeader->Data))->Password;
-
- switch (SmmFunctionHeader->Function) {
- case SMM_FUNCTION_SET_OPAL_PASSWORD:
- if (OpalPasswordIsFullZero (NewPassword) || PasswordLength == 0) {
- Status = EFI_INVALID_PARAMETER;
- goto EXIT;
- }
-
- Status = OpalSavePasswordToSmm (DevicePath, NewPassword, PasswordLength);
- break;
-
- default:
- Status = EFI_UNSUPPORTED;
- break;
- }
-
-EXIT:
- SmmFunctionHeader->ReturnStatus = Status;
-
- //
- // Return EFI_SUCCESS cause only one handler can be trigged.
- // so return EFI_WARN_INTERRUPT_SOURCE_PENDING to make all handler can be trigged.
- //
- return EFI_WARN_INTERRUPT_SOURCE_PENDING;
-}
-
-/**
- The constructor function.
-
- Register SMI handler when link to SMM driver.
-
- @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalPasswordSupportLibConstructor (
- VOID
- )
-{
- EFI_SMM_BASE2_PROTOCOL *SmmBase2;
- EFI_SMM_SYSTEM_TABLE2 *Smst;
- EFI_HANDLE SmmHandle;
- EFI_STATUS Status;
-
- Status = gBS->LocateProtocol (&gEfiSmmBase2ProtocolGuid, NULL, (VOID**) &SmmBase2);
- if (EFI_ERROR (Status)) {
- return RETURN_SUCCESS;
- }
- Status = SmmBase2->InSmm (SmmBase2, &gInSmm);
- if (EFI_ERROR (Status)) {
- return RETURN_SUCCESS;
- }
- if (!gInSmm) {
- return RETURN_SUCCESS;
- }
-
- //
- // Good, we are in SMM
- //
- Status = SmmBase2->GetSmstLocation (SmmBase2, &Smst);
- if (EFI_ERROR (Status)) {
- return RETURN_SUCCESS;
- }
-
- SmmHandle = NULL;
- Status = Smst->SmiHandlerRegister (SmmOpalPasswordHandler, &gOpalPasswordNotifyProtocolGuid, &SmmHandle);
- ASSERT_EFI_ERROR (Status);
-
- return EFI_SUCCESS;
-}
-
-/**
- The Destructor function.
-
- Clean the saved opal device list.
-
- @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
-
-**/
-EFI_STATUS
-EFIAPI
-OpalPasswordSupportLibDestructor (
- VOID
- )
-{
- OPAL_DISK_AND_PASSWORD_INFO *Device;
-
- while (!IsListEmpty (&mDeviceList)) {
- Device = BASE_CR (mDeviceList.ForwardLink, OPAL_DISK_AND_PASSWORD_INFO, Link);
-
- RemoveEntryList (&Device->Link);
- FreePool (Device);
- }
-
- return EFI_SUCCESS;
-}
diff --git a/SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.inf b/SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.inf
deleted file mode 100644
index b7831356e5dd..000000000000
--- a/SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.inf
+++ /dev/null
@@ -1,55 +0,0 @@
-## @file
-# This is a OpalPassword support library.
-#
-# This module is used to provide API used by Opal password solution.
-#
-# Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-# This program and the accompanying materials
-# are licensed and made available under the terms and conditions of the BSD License
-# which accompanies this distribution. The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-#
-##
-[Defines]
- INF_VERSION = 0x00010017
- BASE_NAME = OpalPasswordSupportLib
- FILE_GUID = 00F93D8C-00A6-42D0-9327-11CE309B944A
- VERSION_STRING = 1.0
- MODULE_TYPE = BASE
- LIBRARY_CLASS = OpalPasswordSupportLib|DXE_DRIVER DXE_CORE DXE_SMM_DRIVER
-
- CONSTRUCTOR = OpalPasswordSupportLibConstructor
- DESTRUCTOR = OpalPasswordSupportLibDestructor
-#
-# The following information is for reference only and not required by the build tools.
-#
-# VALID_ARCHITECTURES = IA32 X64
-#
-
-[Sources]
- OpalPasswordSupportLib.c
- OpalPasswordSupportNotify.h
-
-[LibraryClasses]
- BaseLib
- BaseMemoryLib
- PrintLib
- DebugLib
- TimerLib
- TcgStorageOpalLib
- UefiLib
-
-[Packages]
- MdePkg/MdePkg.dec
- MdeModulePkg/MdeModulePkg.dec
- SecurityPkg/SecurityPkg.dec
-
-[Protocols]
- gEfiStorageSecurityCommandProtocolGuid ## CONSUMES
- gEfiSmmCommunicationProtocolGuid ## CONSUMES
- gEfiSmmBase2ProtocolGuid ## CONSUMES # only for SMM version
-
-[Guids]
- gEdkiiPiSmmCommunicationRegionTableGuid ## CONSUMES ## SystemTable
diff --git a/SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportNotify.h b/SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportNotify.h
deleted file mode 100644
index a2115b738653..000000000000
--- a/SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportNotify.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/** @file
- Implementation of Opal password support library.
-
-Copyright (c) 2016 - 2017, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _DXE_OPAL_NOTIFY_H_
-#define _DXE_OPAL_NOTIFY_H_
-
-#include <PiDxe.h>
-#include <PiSmm.h>
-
-#include <Guid/PiSmmCommunicationRegionTable.h>
-#include <Library/DebugLib.h>
-#include <Library/BaseMemoryLib.h>
-#include <Library/UefiBootServicesTableLib.h>
-#include <Library/UefiLib.h>
-#include <Library/OpalPasswordSupportLib.h>
-#include <Library/DevicePathLib.h>
-#include <Library/MemoryAllocationLib.h>
-
-#include <Protocol/SmmCommunication.h>
-#include <Protocol/SmmBase2.h>
-
-
-#pragma pack(1)
-
-typedef struct {
- UINTN Function;
- EFI_STATUS ReturnStatus;
- UINT8 Data[1];
-} OPAL_SMM_COMMUNICATE_HEADER;
-
-typedef struct {
- UINT8 Password[32];
- UINT8 PasswordLength;
-
- EFI_DEVICE_PATH_PROTOCOL OpalDevicePath;
-} OPAL_COMM_DEVICE_LIST;
-
-#pragma pack()
-
-#define SMM_FUNCTION_SET_OPAL_PASSWORD 1
-
-#define OPAL_PASSWORD_NOTIFY_PROTOCOL_GUID {0x0ff2ddd0, 0xefc9, 0x4f49, { 0x99, 0x7a, 0xcb, 0x59, 0x44, 0xe6, 0x97, 0xd3 } }
-
-#endif
diff --git a/SecurityPkg/SecurityPkg.dec b/SecurityPkg/SecurityPkg.dec
index 71963eb750d5..77d6b073d401 100644
--- a/SecurityPkg/SecurityPkg.dec
+++ b/SecurityPkg/SecurityPkg.dec
@@ -90,10 +90,6 @@ [LibraryClasses]
#
TcgStorageOpalLib|Include/Library/TcgStorageOpalLib.h
- ## @libraryclass Provides interfaces about Opal commond special for Opal password solution.
- #
- OpalPasswordSupportLib|Include/Library/OpalPasswordSupportLib.h
-
[Guids]
## Security package token space guid.
# Include/Guid/SecurityPkgTokenSpace.h
diff --git a/SecurityPkg/SecurityPkg.dsc b/SecurityPkg/SecurityPkg.dsc
index 9be484877cc2..ed47fb2fa05b 100644
--- a/SecurityPkg/SecurityPkg.dsc
+++ b/SecurityPkg/SecurityPkg.dsc
@@ -73,7 +73,6 @@ [LibraryClasses]
PciExpressLib|MdePkg/Library/BasePciExpressLib/BasePciExpressLib.inf
TcgStorageCoreLib|SecurityPkg/Library/TcgStorageCoreLib/TcgStorageCoreLib.inf
TcgStorageOpalLib|SecurityPkg/Library/TcgStorageOpalLib/TcgStorageOpalLib.inf
- OpalPasswordSupportLib|SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.inf
ResetSystemLib|MdeModulePkg/Library/BaseResetSystemLibNull/BaseResetSystemLibNull.inf
[LibraryClasses.common.PEIM]
@@ -204,7 +203,6 @@ [Components]
#
SecurityPkg/Library/TcgStorageCoreLib/TcgStorageCoreLib.inf
SecurityPkg/Library/TcgStorageOpalLib/TcgStorageOpalLib.inf
- SecurityPkg/Library/OpalPasswordSupportLib/OpalPasswordSupportLib.inf
#
# Other
--
2.7.0.windows.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V2 7/7] SecurityPkg OpalPasswordExtraInfoVariable.h: Remove it
2018-03-07 13:19 [PATCH V2 0/7] OpalPassword: New solution without SMM device code Star Zeng
` (5 preceding siblings ...)
2018-03-07 13:19 ` [PATCH V2 6/7] SecurityPkg OpalPasswordSupportLib: Remove it Star Zeng
@ 2018-03-07 13:19 ` Star Zeng
6 siblings, 0 replies; 10+ messages in thread
From: Star Zeng @ 2018-03-07 13:19 UTC (permalink / raw)
To: edk2-devel; +Cc: Star Zeng, Jiewen Yao, Eric Dong, Chao Zhang
Remove OpalPasswordExtraInfoVariable.h as it is not been used
anymore.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
---
| 27 ----------------------
1 file changed, 27 deletions(-)
delete mode 100644 SecurityPkg/Include/Guid/OpalPasswordExtraInfoVariable.h
diff --git a/SecurityPkg/Include/Guid/OpalPasswordExtraInfoVariable.h b/SecurityPkg/Include/Guid/OpalPasswordExtraInfoVariable.h
deleted file mode 100644
index f16d0a4ac360..000000000000
--- a/SecurityPkg/Include/Guid/OpalPasswordExtraInfoVariable.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/** @file
- Defines Name GUIDs to represent an Opal device variable guid for Opal Security Feature.
-
-Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution. The full text of the license may be found at
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _OPAL_PASSWORD_EXTRA_INFO_VARIABLE_H_
-#define _OPAL_PASSWORD_EXTRA_INFO_VARIABLE_H_
-
-#define OPAL_EXTRA_INFO_VAR_NAME L"OpalExtraInfo"
-
-typedef struct {
- UINT8 EnableBlockSid;
-} OPAL_EXTRA_INFO_VAR;
-
-extern EFI_GUID gOpalExtraInfoVariableGuid;
-
-#endif // _OPAL_PASSWORD_SECURITY_VARIABLE_H_
-
--
2.7.0.windows.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM device code
2018-03-07 13:19 ` [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM device code Star Zeng
@ 2018-03-08 11:44 ` Yao, Jiewen
2018-03-08 11:48 ` Zeng, Star
0 siblings, 1 reply; 10+ messages in thread
From: Yao, Jiewen @ 2018-03-08 11:44 UTC (permalink / raw)
To: Zeng, Star, edk2-devel@lists.01.org; +Cc: Dong, Eric, Zhang, Chao B
One minor:
> + if (InputLength == 0 || InputKey.ScanCode == SCAN_ESC) {
I prefer we also zero Unicode here. ESC just means exit, the Unicode buffer might already be filled.
> + return NULL;
> + }
> +
> + Ascii = AllocateZeroPool (PSID_CHARACTER_LENGTH + 1);
> + if (Ascii == NULL) {
> + ZeroMem (Unicode, sizeof (Unicode));
> + ZeroMem (Mask, sizeof (Mask));
> + return NULL;
> + }
With above change, Reviewed-by: Jiewen.yao@intel.com
> -----Original Message-----
> From: Zeng, Star
> Sent: Wednesday, March 7, 2018 9:19 PM
> To: edk2-devel@lists.01.org
> Cc: Zeng, Star <star.zeng@intel.com>; Yao, Jiewen <jiewen.yao@intel.com>;
> Dong, Eric <eric.dong@intel.com>; Zhang, Chao B <chao.b.zhang@intel.com>
> Subject: [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM
> device code
>
> After IOMMU is enabled in S3, original solution with SMM device
> code (OpalPasswordSmm) to unlock OPAL device for S3 will not work
> as the DMA operation will be aborted without granted DMA buffer.
> Instead, this solution is to add OpalPasswordPei to eliminate
> SMM device code, and OPAL setup UI produced by OpalPasswordDxe
> will be updated to send requests (set password, update password,
> and etc), and then the requests will be processed in next boot
> before SmmReadyToLock, password and device info will be saved to
> lock box used by OpalPasswordPei to unlock OPAL device for S3.
>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Eric Dong <eric.dong@intel.com>
> Cc: Chao Zhang <chao.b.zhang@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Star Zeng <star.zeng@intel.com>
> ---
> SecurityPkg/SecurityPkg.dsc | 2 +
> SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c | 398 +++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c | 1335 +++++++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h | 435 +++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c | 3003
> ++++++++++++++++++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h | 613 ++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c | 1178 ++++++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h | 380 +++
> .../Tcg/Opal/OpalPassword/OpalHiiCallbacks.c | 219 ++
> .../Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni | 84 +
> .../Tcg/Opal/OpalPassword/OpalHiiFormValues.h | 123 +
> SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c | 2144
> ++++++++++++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h | 455 +++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h | 815 ++++++
> .../Tcg/Opal/OpalPassword/OpalPasswordCommon.h | 65 +
> .../Tcg/Opal/OpalPassword/OpalPasswordDxe.inf | 81 +
> .../Tcg/Opal/OpalPassword/OpalPasswordForm.vfr | 309 ++
> .../Tcg/Opal/OpalPassword/OpalPasswordPei.c | 940 ++++++
> .../Tcg/Opal/OpalPassword/OpalPasswordPei.h | 133 +
> .../Tcg/Opal/OpalPassword/OpalPasswordPei.inf | 63 +
> 20 files changed, 12775 insertions(+)
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
>
> diff --git a/SecurityPkg/SecurityPkg.dsc b/SecurityPkg/SecurityPkg.dsc
> index 65a2fe3d7967..f82703a17b82 100644
> --- a/SecurityPkg/SecurityPkg.dsc
> +++ b/SecurityPkg/SecurityPkg.dsc
> @@ -324,6 +324,8 @@ [Components.IA32, Components.X64]
> #
> SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordDxe.inf
> SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf
> + SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> + SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
>
> [Components.IPF]
> SecurityPkg/VariableAuthenticated/EsalVariableDxeSal/EsalVariableDxeSal.inf
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
> new file mode 100644
> index 000000000000..ef963d0e0b62
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
> @@ -0,0 +1,398 @@
> +/** @file
> + UEFI Component Name(2) protocol implementation for Opal driver.
> +
> +Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalDriver.h"
> +
> +//
> +// EFI Component Name Protocol
> +//
> +GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL
> gOpalComponentName = {
> + OpalEfiDriverComponentNameGetDriverName,
> + OpalEfiDriverComponentNameGetControllerName,
> + "eng"
> +};
> +
> +//
> +// EFI Component Name 2 Protocol
> +//
> +GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL
> gOpalComponentName2 = {
> + OpalEfiDriverComponentName2GetDriverName,
> + OpalEfiDriverComponentName2GetControllerName,
> + "en"
> +};
> +
> +
> +/// The name of the driver in all the languages we support.
> +GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE
> mOpalDriverNameTable[] = {
> + { LANGUAGE_RFC_3066_ENGLISH,
> (CHAR16*)EFI_DRIVER_NAME_UNICODE },
> + { LANGUAGE_ISO_639_2_ENGLISH,
> (CHAR16*)EFI_DRIVER_NAME_UNICODE },
> + { 0, 0 }
> +};
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the driver.
> +
> + This function retrieves the user readable name of a driver in the form of a
> + Unicode string. If the driver specified by This has a user readable name in
> + the language specified by Language, then a pointer to the driver name is
> + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
> + by This does not support the language specified by Language,
> + then EFI_UNSUPPORTED is returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> + in RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param DriverName[out] A pointer to the Unicode string to
> return.
> + This Unicode string is the name of the
> + driver specified by This in the language
> + specified by Language.
> +
> + @retval EFI_SUCCESS The Unicode string for the Driver specified
> by
> + This and the language specified by
> Language was
> + returned in DriverName.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER DriverName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentNameGetDriverName(
> + EFI_COMPONENT_NAME_PROTOCOL* This,
> + CHAR8* Language,
> + CHAR16** DriverName
> + )
> +{
> + return LookupUnicodeString2(
> + Language,
> + This->SupportedLanguages,
> + mOpalDriverNameTable,
> + DriverName,
> + TRUE
> + );
> +}
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the driver.
> +
> + This function retrieves the user readable name of a driver in the form of a
> + Unicode string. If the driver specified by This has a user readable name in
> + the language specified by Language, then a pointer to the driver name is
> + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
> + by This does not support the language specified by Language,
> + then EFI_UNSUPPORTED is returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> + in RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param DriverName[out] A pointer to the Unicode string to
> return.
> + This Unicode string is the name of the
> + driver specified by This in the language
> + specified by Language.
> +
> + @retval EFI_SUCCESS The Unicode string for the Driver specified
> by
> + This and the language specified by
> Language was
> + returned in DriverName.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER DriverName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentName2GetDriverName(
> + EFI_COMPONENT_NAME2_PROTOCOL* This,
> + CHAR8* Language,
> + CHAR16** DriverName
> + )
> +{
> + return LookupUnicodeString2(
> + Language,
> + This->SupportedLanguages,
> + mOpalDriverNameTable,
> + DriverName,
> + FALSE
> + );
> +}
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +GetControllerName(
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + )
> +{
> + if (Language == NULL || ControllerName == NULL || ControllerHandle ==
> NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + // don't support any controller or children names
> + return EFI_UNSUPPORTED;
> +}
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentNameGetControllerName(
> + EFI_COMPONENT_NAME_PROTOCOL* This,
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + )
> +{
> + return (GetControllerName( ControllerHandle, ChildHandle, Language,
> ControllerName));
> +}
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentName2GetControllerName(
> + EFI_COMPONENT_NAME2_PROTOCOL* This,
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + )
> +{
> + return (GetControllerName(ControllerHandle, ChildHandle, Language,
> ControllerName));
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
> new file mode 100644
> index 000000000000..550abacc9c75
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
> @@ -0,0 +1,1335 @@
> +/** @file
> + This driver is used for Opal Password Feature support at AHCI mode.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +
> +#include "OpalPasswordPei.h"
> +
> +/**
> + Start command for give slot on specific port.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param CommandSlot The number of CommandSlot.
> + @param Timeout The timeout Value of start.
> +
> + @retval EFI_DEVICE_ERROR The command start unsuccessfully.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_SUCCESS The command start successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciStartCommand (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT8 CommandSlot,
> + IN UINT64 Timeout
> + );
> +
> +/**
> + Stop command running for giving port
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param Timeout The timeout Value of stop.
> +
> + @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_SUCCESS The command stop successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciStopCommand (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT64 Timeout
> + );
> +
> +/**
> + Read AHCI Operation register.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The operation register offset.
> +
> + @return The register content read.
> +
> +**/
> +UINT32
> +EFIAPI
> +AhciReadReg (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset
> + )
> +{
> + UINT32 Data;
> +
> + Data = 0;
> +
> + Data = MmioRead32 (AhciBar + Offset);
> +
> + return Data;
> +}
> +
> +/**
> + Write AHCI Operation register.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The operation register offset.
> + @param Data The Data used to write down.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciWriteReg (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset,
> + IN UINT32 Data
> + )
> +{
> + MmioWrite32 (AhciBar + Offset, Data);
> +
> + return ;
> +}
> +
> +/**
> + Do AND operation with the Value of AHCI Operation register.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The operation register offset.
> + @param AndData The Data used to do AND operation.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciAndReg (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset,
> + IN UINT32 AndData
> + )
> +{
> + UINT32 Data;
> +
> + Data = AhciReadReg (AhciBar, Offset);
> +
> + Data &= AndData;
> +
> + AhciWriteReg (AhciBar, Offset, Data);
> +}
> +
> +/**
> + Do OR operation with the Value of AHCI Operation register.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The operation register offset.
> + @param OrData The Data used to do OR operation.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciOrReg (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset,
> + IN UINT32 OrData
> + )
> +{
> + UINT32 Data;
> +
> + Data = AhciReadReg (AhciBar, Offset);
> +
> + Data |= OrData;
> +
> + AhciWriteReg (AhciBar, Offset, Data);
> +}
> +
> +/**
> + Wait for memory set to the test Value.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The memory offset to test.
> + @param MaskValue The mask Value of memory.
> + @param TestValue The test Value of memory.
> + @param Timeout The time out Value for wait memory set.
> +
> + @retval EFI_DEVICE_ERROR The memory is not set.
> + @retval EFI_TIMEOUT The memory setting is time out.
> + @retval EFI_SUCCESS The memory is correct set.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciWaitMmioSet (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset,
> + IN UINT32 MaskValue,
> + IN UINT32 TestValue,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Value;
> + UINT32 Delay;
> +
> + Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
> +
> + do {
> + Value = AhciReadReg (AhciBar, Offset) & MaskValue;
> +
> + if (Value == TestValue) {
> + return EFI_SUCCESS;
> + }
> +
> + //
> + // Stall for 100 microseconds.
> + //
> + MicroSecondDelay (100);
> +
> + Delay--;
> +
> + } while (Delay > 0);
> +
> + return EFI_TIMEOUT;
> +}
> +/**
> + Wait for the Value of the specified system memory set to the test Value.
> +
> + @param Address The system memory address to test.
> + @param MaskValue The mask Value of memory.
> + @param TestValue The test Value of memory.
> + @param Timeout The time out Value for wait memory set,
> uses 100ns as a unit.
> +
> + @retval EFI_TIMEOUT The system memory setting is time out.
> + @retval EFI_SUCCESS The system memory is correct set.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciWaitMemSet (
> + IN EFI_PHYSICAL_ADDRESS Address,
> + IN UINT32 MaskValue,
> + IN UINT32 TestValue,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Value;
> + UINT32 Delay;
> +
> + Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
> +
> + do {
> + //
> + // Access sytem memory to see if the Value is the tested one.
> + //
> + // The system memory pointed by Address will be updated by the
> + // SATA Host Controller, "volatile" is introduced to prevent
> + // compiler from optimizing the access to the memory address
> + // to only read once.
> + //
> + Value = *(volatile UINT32 *) (UINTN) Address;
> + Value &= MaskValue;
> +
> + if (Value == TestValue) {
> + return EFI_SUCCESS;
> + }
> +
> + //
> + // Stall for 100 microseconds.
> + //
> + MicroSecondDelay (100);
> +
> + Delay--;
> +
> + } while (Delay > 0);
> +
> + return EFI_TIMEOUT;
> +}
> +
> +/**
> + Check the memory status to the test Value.
> +
> + @param[in] Address The memory address to test.
> + @param[in] MaskValue The mask Value of memory.
> + @param[in] TestValue The test Value of memory.
> + @param[in, out] RetryTimes The retry times Value for waitting
> memory set. If 0, then just try once.
> +
> + @retval EFI_NOTREADY The memory is not set.
> + @retval EFI_TIMEOUT The memory setting retry times out.
> + @retval EFI_SUCCESS The memory is correct set.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciCheckMemSet (
> + IN UINTN Address,
> + IN UINT32 MaskValue,
> + IN UINT32 TestValue,
> + IN OUT UINTN *RetryTimes OPTIONAL
> + )
> +{
> + UINT32 Value;
> +
> + if (RetryTimes != NULL) {
> + (*RetryTimes)--;
> + }
> +
> + Value = *(volatile UINT32 *) Address;
> + Value &= MaskValue;
> +
> + if (Value == TestValue) {
> + return EFI_SUCCESS;
> + }
> +
> + if ((RetryTimes != NULL) && (*RetryTimes == 0)) {
> + return EFI_TIMEOUT;
> + } else {
> + return EFI_NOT_READY;
> + }
> +}
> +
> +/**
> + Clear the port interrupt and error status. It will also clear
> + HBA interrupt status.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciClearPortStatus (
> + IN UINT32 AhciBar,
> + IN UINT8 Port
> + )
> +{
> + UINT32 Offset;
> +
> + //
> + // Clear any error status
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SERR;
> + AhciWriteReg (AhciBar, Offset, AhciReadReg (AhciBar, Offset));
> +
> + //
> + // Clear any port interrupt status
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_IS;
> + AhciWriteReg (AhciBar, Offset, AhciReadReg (AhciBar, Offset));
> +
> + //
> + // Clear any HBA interrupt status
> + //
> + AhciWriteReg (AhciBar, EFI_AHCI_IS_OFFSET, AhciReadReg (AhciBar,
> EFI_AHCI_IS_OFFSET));
> +}
> +
> +/**
> + Enable the FIS running for giving port.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param Timeout The timeout Value of enabling FIS.
> +
> + @retval EFI_DEVICE_ERROR The FIS enable setting fails.
> + @retval EFI_TIMEOUT The FIS enable setting is time out.
> + @retval EFI_SUCCESS The FIS enable successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciEnableFisReceive (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Offset;
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_FRE);
> +
> + return AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + EFI_AHCI_PORT_CMD_FR,
> + EFI_AHCI_PORT_CMD_FR,
> + Timeout
> + );
> +}
> +
> +/**
> + Disable the FIS running for giving port.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param Timeout The timeout Value of disabling FIS.
> +
> + @retval EFI_DEVICE_ERROR The FIS disable setting fails.
> + @retval EFI_TIMEOUT The FIS disable setting is time out.
> + @retval EFI_UNSUPPORTED The port is in running state.
> + @retval EFI_SUCCESS The FIS disable successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciDisableFisReceive (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Offset;
> + UINT32 Data;
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + Data = AhciReadReg (AhciBar, Offset);
> +
> + //
> + // Before disabling Fis receive, the DMA engine of the port should NOT be in
> running status.
> + //
> + if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) != 0) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + //
> + // Check if the Fis receive DMA engine for the port is running.
> + //
> + if ((Data & EFI_AHCI_PORT_CMD_FR) != EFI_AHCI_PORT_CMD_FR) {
> + return EFI_SUCCESS;
> + }
> +
> + AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_FRE));
> +
> + return AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + EFI_AHCI_PORT_CMD_FR,
> + 0,
> + Timeout
> + );
> +}
> +
> +/**
> + Build the command list, command table and prepare the fis receiver.
> +
> + @param AhciContext The pointer to the AHCI_CONTEXT.
> + @param Port The number of port.
> + @param PortMultiplier The timeout Value of stop.
> + @param CommandFis The control fis will be used for the
> transfer.
> + @param CommandList The command list will be used for the
> transfer.
> + @param AtapiCommand The atapi command will be used for
> the transfer.
> + @param AtapiCommandLength The Length of the atapi command.
> + @param CommandSlotNumber The command slot will be used for
> the transfer.
> + @param DataPhysicalAddr The pointer to the Data Buffer pci bus
> master address.
> + @param DataLength The Data count to be transferred.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciBuildCommand (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN EFI_AHCI_COMMAND_FIS *CommandFis,
> + IN EFI_AHCI_COMMAND_LIST *CommandList,
> + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
> + IN UINT8 AtapiCommandLength,
> + IN UINT8 CommandSlotNumber,
> + IN OUT VOID *DataPhysicalAddr,
> + IN UINT64 DataLength
> + )
> +{
> + EFI_AHCI_REGISTERS *AhciRegisters;
> + UINT32 AhciBar;
> + UINT64 BaseAddr;
> + UINT64 PrdtNumber;
> + UINTN RemainedData;
> + UINTN MemAddr;
> + DATA_64 Data64;
> + UINT32 Offset;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> + AhciBar = AhciContext->AhciBar;
> +
> + //
> + // Filling the PRDT
> + //
> + PrdtNumber = DivU64x32 (DataLength + EFI_AHCI_MAX_DATA_PER_PRDT -
> 1, EFI_AHCI_MAX_DATA_PER_PRDT);
> +
> + //
> + // According to AHCI 1.3 spec, a PRDT entry can point to a maximum 4MB
> Data block.
> + // It also limits that the maximum amount of the PRDT entry in the command
> table
> + // is 65535.
> + //
> + ASSERT (PrdtNumber <= 1);
> +
> + Data64.Uint64 = (UINTN) (AhciRegisters->AhciRFis);
> +
> + BaseAddr = Data64.Uint64;
> +
> + ZeroMem ((VOID *)((UINTN) BaseAddr), sizeof (EFI_AHCI_RECEIVED_FIS));
> +
> + ZeroMem (AhciRegisters->AhciCommandTable, sizeof
> (EFI_AHCI_COMMAND_TABLE));
> +
> + CommandFis->AhciCFisPmNum = PortMultiplier;
> +
> + CopyMem (&AhciRegisters->AhciCommandTable->CommandFis,
> CommandFis, sizeof (EFI_AHCI_COMMAND_FIS));
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + if (AtapiCommand != NULL) {
> + CopyMem (
> + &AhciRegisters->AhciCommandTable->AtapiCmd,
> + AtapiCommand,
> + AtapiCommandLength
> + );
> +
> + CommandList->AhciCmdA = 1;
> + CommandList->AhciCmdP = 1;
> +
> + AhciOrReg (AhciBar, Offset, (EFI_AHCI_PORT_CMD_DLAE |
> EFI_AHCI_PORT_CMD_ATAPI));
> + } else {
> + AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_DLAE |
> EFI_AHCI_PORT_CMD_ATAPI));
> + }
> +
> + RemainedData = (UINTN) DataLength;
> + MemAddr = (UINTN) DataPhysicalAddr;
> + CommandList->AhciCmdPrdtl = (UINT32)PrdtNumber;
> +
> + AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbc =
> (UINT32)RemainedData - 1;
> +
> + Data64.Uint64 = (UINT64)MemAddr;
> + AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDba =
> Data64.Uint32.Lower32;
> + AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbau =
> Data64.Uint32.Upper32;
> +
> + //
> + // Set the last PRDT to Interrupt On Complete
> + //
> + AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtIoc = 1;
> +
> + CopyMem (
> + (VOID *) ((UINTN) AhciRegisters->AhciCmdList + (UINTN)
> CommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST)),
> + CommandList,
> + sizeof (EFI_AHCI_COMMAND_LIST)
> + );
> +
> + Data64.Uint64 = (UINT64)(UINTN) AhciRegisters->AhciCommandTable;
> + AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtba =
> Data64.Uint32.Lower32;
> + AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtbau =
> Data64.Uint32.Upper32;
> + AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdPmp =
> PortMultiplier;
> +
> +}
> +
> +/**
> + Buid a command FIS.
> +
> + @param CmdFis A pointer to the EFI_AHCI_COMMAND_FIS
> Data structure.
> + @param AtaCommandBlock A pointer to the AhciBuildCommandFis
> Data structure.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciBuildCommandFis (
> + IN OUT EFI_AHCI_COMMAND_FIS *CmdFis,
> + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock
> + )
> +{
> + ZeroMem (CmdFis, sizeof (EFI_AHCI_COMMAND_FIS));
> +
> + CmdFis->AhciCFisType = EFI_AHCI_FIS_REGISTER_H2D;
> + //
> + // Indicator it's a command
> + //
> + CmdFis->AhciCFisCmdInd = 0x1;
> + CmdFis->AhciCFisCmd = AtaCommandBlock->AtaCommand;
> +
> + CmdFis->AhciCFisFeature = AtaCommandBlock->AtaFeatures;
> + CmdFis->AhciCFisFeatureExp = AtaCommandBlock->AtaFeaturesExp;
> +
> + CmdFis->AhciCFisSecNum = AtaCommandBlock->AtaSectorNumber;
> + CmdFis->AhciCFisSecNumExp =
> AtaCommandBlock->AtaSectorNumberExp;
> +
> + CmdFis->AhciCFisClyLow = AtaCommandBlock->AtaCylinderLow;
> + CmdFis->AhciCFisClyLowExp = AtaCommandBlock->AtaCylinderLowExp;
> +
> + CmdFis->AhciCFisClyHigh = AtaCommandBlock->AtaCylinderHigh;
> + CmdFis->AhciCFisClyHighExp = AtaCommandBlock->AtaCylinderHighExp;
> +
> + CmdFis->AhciCFisSecCount = AtaCommandBlock->AtaSectorCount;
> + CmdFis->AhciCFisSecCountExp = AtaCommandBlock->AtaSectorCountExp;
> +
> + CmdFis->AhciCFisDevHead = (UINT8)
> (AtaCommandBlock->AtaDeviceHead | 0xE0);
> +}
> +
> +/**
> + Start a PIO Data transfer on specific port.
> +
> + @param AhciContext The pointer to the AHCI_CONTEXT.
> + @param Port The number of port.
> + @param PortMultiplier The timeout Value of stop.
> + @param AtapiCommand The atapi command will be used for the
> transfer.
> + @param AtapiCommandLength The Length of the atapi command.
> + @param Read The transfer direction.
> + @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
> + @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
> + @param MemoryAddr The pointer to the Data Buffer.
> + @param DataCount The Data count to be transferred.
> + @param Timeout The timeout Value of non Data transfer.
> +
> + @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error
> occurs.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_UNSUPPORTED The device is not ready for transfer.
> + @retval EFI_SUCCESS The PIO Data transfer executes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciPioTransfer (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
> + IN UINT8 AtapiCommandLength,
> + IN BOOLEAN Read,
> + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
> + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
> + IN OUT VOID *MemoryAddr,
> + IN UINT32 DataCount,
> + IN UINT64 Timeout
> + )
> +{
> + EFI_STATUS Status;
> + EFI_AHCI_REGISTERS *AhciRegisters;
> + UINT32 AhciBar;
> + UINT32 FisBaseAddr;
> + UINT32 Offset;
> + UINT32 Delay;
> + EFI_AHCI_COMMAND_FIS CFis;
> + EFI_AHCI_COMMAND_LIST CmdList;
> + UINT32 PortTfd;
> + UINT32 PrdCount;
> + UINT32 OldRfisLo;
> + UINT32 OldRfisHi;
> + UINT32 OldCmdListLo;
> + UINT32 OldCmdListHi;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> + AhciBar = AhciContext->AhciBar;
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FB;
> + OldRfisLo = AhciReadReg (AhciBar, Offset);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FBU;
> + OldRfisHi = AhciReadReg (AhciBar, Offset);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FB;
> + AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciRFis);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FBU;
> + AhciWriteReg (AhciBar, Offset, 0);
> +
> + //
> + // Single task envrionment, we only use one command table for all port
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLB;
> + OldCmdListLo = AhciReadReg (AhciBar, Offset);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLBU;
> + OldCmdListHi = AhciReadReg (AhciBar, Offset);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLB;
> + AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciCmdList);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLBU;
> + AhciWriteReg (AhciBar, Offset, 0);
> +
> + //
> + // Package read needed
> + //
> + AhciBuildCommandFis (&CFis, AtaCommandBlock);
> +
> + ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
> +
> + CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
> + CmdList.AhciCmdW = Read ? 0 : 1;
> +
> + AhciBuildCommand (
> + AhciContext,
> + Port,
> + PortMultiplier,
> + &CFis,
> + &CmdList,
> + AtapiCommand,
> + AtapiCommandLength,
> + 0,
> + MemoryAddr,
> + DataCount
> + );
> +
> + Status = AhciStartCommand (
> + AhciBar,
> + Port,
> + 0,
> + Timeout
> + );
> + if (EFI_ERROR (Status)) {
> + goto Exit;
> + }
> +
> + //
> + // Checking the status and wait the driver sending Data
> + //
> + FisBaseAddr = (UINT32)(UINTN)AhciRegisters->AhciRFis;
> + if (Read && (AtapiCommand == 0)) {
> + //
> + // Wait device sends the PIO setup fis before Data transfer
> + //
> + Status = EFI_TIMEOUT;
> + Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
> + do {
> + Offset = FisBaseAddr + EFI_AHCI_PIO_FIS_OFFSET;
> +
> + Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK,
> EFI_AHCI_FIS_PIO_SETUP, 0);
> + if (!EFI_ERROR (Status)) {
> + Offset = EFI_AHCI_PORT_START + Port *
> EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
> + PortTfd = AhciReadReg (AhciBar, (UINT32) Offset);
> + //
> + // PxTFD will be updated if there is a D2H or SetupFIS received.
> + // For PIO IN transfer, D2H means a device error. Therefore we only
> need to check the TFD after receiving a SetupFIS.
> + //
> + if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
> + Status = EFI_DEVICE_ERROR;
> + break;
> + }
> +
> + PrdCount = *(volatile UINT32 *)
> (&(AhciRegisters->AhciCmdList[0].AhciCmdPrdbc));
> + if (PrdCount == DataCount) {
> + break;
> + }
> + }
> +
> + Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
> + Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK,
> EFI_AHCI_FIS_REGISTER_D2H, 0);
> + if (!EFI_ERROR (Status)) {
> + Status = EFI_DEVICE_ERROR;
> + break;
> + }
> +
> + //
> + // Stall for 100 microseconds.
> + //
> + MicroSecondDelay(100);
> +
> + Delay--;
> + } while (Delay > 0);
> + } else {
> + //
> + // Wait for D2H Fis is received
> + //
> + Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
> + Status = AhciWaitMemSet (
> + Offset,
> + EFI_AHCI_FIS_TYPE_MASK,
> + EFI_AHCI_FIS_REGISTER_D2H,
> + Timeout
> + );
> +
> + if (EFI_ERROR (Status)) {
> + goto Exit;
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_TFD;
> + PortTfd = AhciReadReg (AhciBar, (UINT32) Offset);
> + if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
> + Status = EFI_DEVICE_ERROR;
> + }
> + }
> +
> +Exit:
> + AhciStopCommand (
> + AhciBar,
> + Port,
> + Timeout
> + );
> +
> + AhciDisableFisReceive (
> + AhciBar,
> + Port,
> + Timeout
> + );
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FB;
> + AhciWriteReg (AhciBar, Offset, OldRfisLo);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FBU;
> + AhciWriteReg (AhciBar, Offset, OldRfisHi);
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLB;
> + AhciWriteReg (AhciBar, Offset, OldCmdListLo);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLBU;
> + AhciWriteReg (AhciBar, Offset, OldCmdListHi);
> +
> + return Status;
> +}
> +
> +/**
> + Stop command running for giving port
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param Timeout The timeout Value of stop.
> +
> + @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_SUCCESS The command stop successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciStopCommand (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Offset;
> + UINT32 Data;
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + Data = AhciReadReg (AhciBar, Offset);
> +
> + if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) == 0) {
> + return EFI_SUCCESS;
> + }
> +
> + if ((Data & EFI_AHCI_PORT_CMD_ST) != 0) {
> + AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_ST));
> + }
> +
> + return AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + EFI_AHCI_PORT_CMD_CR,
> + 0,
> + Timeout
> + );
> +}
> +
> +/**
> + Start command for give slot on specific port.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param CommandSlot The number of CommandSlot.
> + @param Timeout The timeout Value of start.
> +
> + @retval EFI_DEVICE_ERROR The command start unsuccessfully.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_SUCCESS The command start successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciStartCommand (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT8 CommandSlot,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 CmdSlotBit;
> + EFI_STATUS Status;
> + UINT32 PortStatus;
> + UINT32 StartCmd;
> + UINT32 PortTfd;
> + UINT32 Offset;
> + UINT32 Capability;
> +
> + //
> + // Collect AHCI controller information
> + //
> + Capability = AhciReadReg(AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
> +
> + CmdSlotBit = (UINT32) (1 << CommandSlot);
> +
> + AhciClearPortStatus (
> + AhciBar,
> + Port
> + );
> +
> + Status = AhciEnableFisReceive (
> + AhciBar,
> + Port,
> + Timeout
> + );
> +
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + PortStatus = AhciReadReg (AhciBar, Offset);
> +
> + StartCmd = 0;
> + if ((PortStatus & EFI_AHCI_PORT_CMD_ALPE) != 0) {
> + StartCmd = AhciReadReg (AhciBar, Offset);
> + StartCmd &= ~EFI_AHCI_PORT_CMD_ICC_MASK;
> + StartCmd |= EFI_AHCI_PORT_CMD_ACTIVE;
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_TFD;
> + PortTfd = AhciReadReg (AhciBar, Offset);
> +
> + if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0)
> {
> + if ((Capability & BIT24) != 0) {
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH
> + EFI_AHCI_PORT_CMD;
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_COL);
> +
> + AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + EFI_AHCI_PORT_CMD_COL,
> + 0,
> + Timeout
> + );
> + }
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_ST | StartCmd);
> +
> + //
> + // Setting the command
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SACT;
> + AhciAndReg (AhciBar, Offset, 0);
> + AhciOrReg (AhciBar, Offset, CmdSlotBit);
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CI;
> + AhciAndReg (AhciBar, Offset, 0);
> + AhciOrReg (AhciBar, Offset, CmdSlotBit);
> + return EFI_SUCCESS;
> +}
> +
> +
> +/**
> + Do AHCI HBA reset.
> +
> + @param[in] AhciBar AHCI bar address.
> + @param[in] Timeout The timeout Value of reset.
> +
> + @retval EFI_DEVICE_ERROR AHCI controller is failed to complete
> hardware reset.
> + @retval EFI_TIMEOUT The reset operation is time out.
> + @retval EFI_SUCCESS AHCI controller is reset successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciReset (
> + IN UINT32 AhciBar,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Delay;
> + UINT32 Value;
> + UINT32 Capability;
> +
> + //
> + // Collect AHCI controller information
> + //
> + Capability = AhciReadReg (AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
> +
> + //
> + // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only
> is not set
> + //
> + if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
> + AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
> + }
> +
> + AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_RESET);
> +
> + Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
> +
> + do {
> + Value = AhciReadReg(AhciBar, EFI_AHCI_GHC_OFFSET);
> + if ((Value & EFI_AHCI_GHC_RESET) == 0) {
> + return EFI_SUCCESS;
> + }
> +
> + //
> + // Stall for 100 microseconds.
> + //
> + MicroSecondDelay(100);
> +
> + Delay--;
> + } while (Delay > 0);
> +
> + return EFI_TIMEOUT;
> +
> +
> +}
> +
> +/**
> + Send Buffer cmd to specific device.
> +
> + @param[in] AhciContext The pointer to the AHCI_CONTEXT.
> + @param[in] Port The port number of attached ATA
> device.
> + @param[in] PortMultiplier The port number of port multiplier of
> attached ATA device.
> + @param[in, out] Buffer The Data Buffer to store IDENTIFY
> PACKET Data.
> +
> + @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_UNSUPPORTED The device is not ready for executing.
> + @retval EFI_SUCCESS The cmd executes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciIdentify (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN OUT ATA_IDENTIFY_DATA *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
> +
> + if (AhciContext == NULL || Buffer == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
> +
> + AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE;
> + AtaCommandBlock.AtaSectorCount = 1;
> +
> + Status = AhciPioTransfer (
> + AhciContext,
> + Port,
> + PortMultiplier,
> + NULL,
> + 0,
> + TRUE,
> + &AtaCommandBlock,
> + NULL,
> + Buffer,
> + sizeof (ATA_IDENTIFY_DATA),
> + ATA_TIMEOUT
> + );
> +
> + return Status;
> +}
> +
> +/**
> + Allocate transfer-related data struct which is used at AHCI mode.
> +
> + @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
> +
> + @retval EFI_OUT_OF_RESOURCE No enough resource.
> + @retval EFI_SUCCESS Successful to allocate resource.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciAllocateResource (
> + IN OUT AHCI_CONTEXT *AhciContext
> + )
> +{
> + EFI_STATUS Status;
> + EFI_AHCI_REGISTERS *AhciRegisters;
> + EFI_PHYSICAL_ADDRESS DeviceAddress;
> + VOID *Base;
> + VOID *Mapping;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> +
> + //
> + // Allocate resources required by AHCI host controller.
> + //
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + AhciRegisters->AhciRFisMapping = Mapping;
> + AhciRegisters->AhciRFis = Base;
> + ZeroMem (AhciRegisters->AhciRFis, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES
> (sizeof (EFI_AHCI_RECEIVED_FIS)));
> +
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciRFisMapping
> + );
> + AhciRegisters->AhciRFis = NULL;
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + AhciRegisters->AhciCmdListMapping = Mapping;
> + AhciRegisters->AhciCmdList = Base;
> + ZeroMem (AhciRegisters->AhciCmdList, EFI_PAGE_SIZE *
> EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)));
> +
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciRFisMapping
> + );
> + AhciRegisters->AhciRFis = NULL;
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
> + AhciRegisters->AhciCmdList,
> + AhciRegisters->AhciCmdListMapping
> + );
> + AhciRegisters->AhciCmdList = NULL;
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + AhciRegisters->AhciCommandTableMapping = Mapping;
> + AhciRegisters->AhciCommandTable = Base;
> + ZeroMem (AhciRegisters->AhciCommandTable, EFI_PAGE_SIZE *
> EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)));
> +
> + //
> + // Allocate resources for data transfer.
> + //
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (HDD_PAYLOAD),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciRFisMapping
> + );
> + AhciRegisters->AhciRFis = NULL;
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
> + AhciRegisters->AhciCmdList,
> + AhciRegisters->AhciCmdListMapping
> + );
> + AhciRegisters->AhciCmdList = NULL;
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciCommandTable,
> + AhciRegisters->AhciCommandTableMapping
> + );
> + AhciRegisters->AhciCommandTable = NULL;
> +
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + AhciContext->BufferMapping = Mapping;
> + AhciContext->Buffer = Base;
> + ZeroMem (AhciContext->Buffer, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES
> (HDD_PAYLOAD));
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "%a() AhciContext 0x%x 0x%x 0x%x 0x%x\n",
> + __FUNCTION__,
> + AhciContext->Buffer,
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciCmdList,
> + AhciRegisters->AhciCommandTable
> + ));
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Free allocated transfer-related data struct which is used at AHCI mode.
> +
> + @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciFreeResource (
> + IN OUT AHCI_CONTEXT *AhciContext
> + )
> +{
> + EFI_AHCI_REGISTERS *AhciRegisters;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> +
> + if (AhciRegisters->AhciRFis != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciRFisMapping
> + );
> + AhciRegisters->AhciRFis = NULL;
> + }
> +
> + if (AhciRegisters->AhciCmdList != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
> + AhciRegisters->AhciCmdList,
> + AhciRegisters->AhciCmdListMapping
> + );
> + AhciRegisters->AhciCmdList = NULL;
> + }
> +
> + if (AhciRegisters->AhciCommandTable != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)),
> + AhciRegisters->AhciCommandTable,
> + AhciRegisters->AhciCommandTableMapping
> + );
> + AhciRegisters->AhciCommandTable = NULL;
> + }
> +
> + if (AhciContext->Buffer != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (HDD_PAYLOAD),
> + AhciContext->Buffer,
> + AhciContext->BufferMapping
> + );
> + AhciContext->Buffer = NULL;
> + }
> +}
> +
> +/**
> + Initialize ATA host controller at AHCI mode.
> +
> + The function is designed to initialize ATA host controller.
> +
> + @param[in] AhciContext The pointer to the AHCI_CONTEXT.
> + @param[in] Port The port number to do initialization.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciModeInitialize (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port
> + )
> +{
> + EFI_STATUS Status;
> + EFI_AHCI_REGISTERS *AhciRegisters;
> + UINT32 AhciBar;
> + UINT32 Capability;
> + UINT32 Offset;
> + UINT32 Data;
> + UINT32 PhyDetectDelay;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> + AhciBar = AhciContext->AhciBar;
> +
> + Status = AhciReset (AhciBar, ATA_TIMEOUT);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // Collect AHCI controller information
> + //
> + Capability = AhciReadReg (AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
> +
> + //
> + // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only
> is not set
> + //
> + if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
> + AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FB;
> + AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciRFis);
> +
> + //
> + // Single task envrionment, we only use one command table for all port
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLB;
> + AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciCmdList);
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + Data = AhciReadReg (AhciBar, Offset);
> + if ((Data & EFI_AHCI_PORT_CMD_CPD) != 0) {
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_POD);
> + }
> +
> + if ((Capability & BIT27) != 0) {
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_SUD);
> + }
> +
> + //
> + // Disable aggressive power management.
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SCTL;
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_SCTL_IPM_INIT);
> + //
> + // Disable the reporting of the corresponding interrupt to system software.
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_IE;
> + AhciAndReg (AhciBar, Offset, 0);
> +
> + Status = AhciEnableFisReceive (
> + AhciBar,
> + Port,
> + 5000000
> + );
> + ASSERT_EFI_ERROR (Status);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // According to SATA1.0a spec section 5.2, we need to wait for PxTFD.BSY
> and PxTFD.DRQ
> + // and PxTFD.ERR to be zero. The maximum wait time is 16s which is defined
> at ATA spec.
> + //
> + PhyDetectDelay = 16 * 1000;
> + do {
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SERR;
> + if (AhciReadReg(AhciBar, Offset) != 0) {
> + AhciWriteReg (AhciBar, Offset, AhciReadReg(AhciBar, Offset));
> + }
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_TFD;
> +
> + Data = AhciReadReg (AhciBar, Offset) & EFI_AHCI_PORT_TFD_MASK;
> + if (Data == 0) {
> + break;
> + }
> +
> + MicroSecondDelay (1000);
> + PhyDetectDelay--;
> + } while (PhyDetectDelay > 0);
> +
> + if (PhyDetectDelay == 0) {
> + return EFI_NOT_FOUND;
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SIG;
> + Status = AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + 0x0000FFFF,
> + 0x00000101,
> + 160000000
> + );
> +
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + return Status;
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
> new file mode 100644
> index 000000000000..b1d6ed13d5b9
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
> @@ -0,0 +1,435 @@
> +/** @file
> + Header file for AHCI mode of ATA host controller.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +
> +#ifndef __OPAL_PASSWORD_AHCI_MODE_H__
> +#define __OPAL_PASSWORD_AHCI_MODE_H__
> +
> +//
> +// OPAL LIBRARY CALLBACKS
> +//
> +#define ATA_COMMAND_TRUSTED_RECEIVE 0x5C
> +#define ATA_COMMAND_TRUSTED_SEND 0x5E
> +
> +//
> +// ATA TRUSTED commands express transfer Length in 512 byte multiple
> +//
> +#define ATA_TRUSTED_TRANSFER_LENGTH_MULTIPLE 512
> +#define ATA_DEVICE_LBA 0x40 ///< Set for
> commands with LBA (rather than CHS) addresses
> +
> +
> +#define EFI_AHCI_BAR_INDEX 0x05
> +
> +#define EFI_AHCI_CAPABILITY_OFFSET 0x0000
> +#define EFI_AHCI_CAP_SAM BIT18
> +#define EFI_AHCI_GHC_OFFSET 0x0004
> +#define EFI_AHCI_GHC_RESET BIT0
> +#define EFI_AHCI_GHC_IE BIT1
> +#define EFI_AHCI_GHC_ENABLE BIT31
> +#define EFI_AHCI_IS_OFFSET 0x0008
> +#define EFI_AHCI_PI_OFFSET 0x000C
> +
> +typedef struct {
> + UINT32 Lower32;
> + UINT32 Upper32;
> +} DATA_32;
> +
> +typedef union {
> + DATA_32 Uint32;
> + UINT64 Uint64;
> +} DATA_64;
> +
> +//
> +// Each PRDT entry can point to a memory block up to 4M byte
> +//
> +#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000
> +
> +#define EFI_AHCI_FIS_REGISTER_H2D 0x27 //Register
> FIS - Host to Device
> +#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
> +#define EFI_AHCI_FIS_REGISTER_D2H 0x34 //Register
> FIS - Device to Host
> +#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20
> +#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 //DMA
> Activate FIS - Device to Host
> +#define EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH 4
> +#define EFI_AHCI_FIS_DMA_SETUP 0x41 //DMA
> Setup FIS - Bi-directional
> +#define EFI_AHCI_FIS_DMA_SETUP_LENGTH 28
> +#define EFI_AHCI_FIS_DATA 0x46 //Data FIS -
> Bi-directional
> +#define EFI_AHCI_FIS_BIST 0x58 //BIST
> Activate FIS - Bi-directional
> +#define EFI_AHCI_FIS_BIST_LENGTH 12
> +#define EFI_AHCI_FIS_PIO_SETUP 0x5F //PIO Setup
> FIS - Device to Host
> +#define EFI_AHCI_FIS_PIO_SETUP_LENGTH 20
> +#define EFI_AHCI_FIS_SET_DEVICE 0xA1 //Set Device
> Bits FIS - Device to Host
> +#define EFI_AHCI_FIS_SET_DEVICE_LENGTH 8
> +
> +#define EFI_AHCI_D2H_FIS_OFFSET 0x40
> +#define EFI_AHCI_DMA_FIS_OFFSET 0x00
> +#define EFI_AHCI_PIO_FIS_OFFSET 0x20
> +#define EFI_AHCI_SDB_FIS_OFFSET 0x58
> +#define EFI_AHCI_FIS_TYPE_MASK 0xFF
> +#define EFI_AHCI_U_FIS_OFFSET 0x60
> +
> +//
> +// Port register
> +//
> +#define EFI_AHCI_PORT_START 0x0100
> +#define EFI_AHCI_PORT_REG_WIDTH 0x0080
> +#define EFI_AHCI_PORT_CLB 0x0000
> +#define EFI_AHCI_PORT_CLBU 0x0004
> +#define EFI_AHCI_PORT_FB 0x0008
> +#define EFI_AHCI_PORT_FBU 0x000C
> +#define EFI_AHCI_PORT_IS 0x0010
> +#define EFI_AHCI_PORT_IS_DHRS BIT0
> +#define EFI_AHCI_PORT_IS_PSS BIT1
> +#define EFI_AHCI_PORT_IS_SSS BIT2
> +#define EFI_AHCI_PORT_IS_SDBS BIT3
> +#define EFI_AHCI_PORT_IS_UFS BIT4
> +#define EFI_AHCI_PORT_IS_DPS BIT5
> +#define EFI_AHCI_PORT_IS_PCS BIT6
> +#define EFI_AHCI_PORT_IS_DIS BIT7
> +#define EFI_AHCI_PORT_IS_PRCS BIT22
> +#define EFI_AHCI_PORT_IS_IPMS BIT23
> +#define EFI_AHCI_PORT_IS_OFS BIT24
> +#define EFI_AHCI_PORT_IS_INFS BIT26
> +#define EFI_AHCI_PORT_IS_IFS BIT27
> +#define EFI_AHCI_PORT_IS_HBDS BIT28
> +#define EFI_AHCI_PORT_IS_HBFS BIT29
> +#define EFI_AHCI_PORT_IS_TFES BIT30
> +#define EFI_AHCI_PORT_IS_CPDS BIT31
> +#define EFI_AHCI_PORT_IS_CLEAR 0xFFFFFFFF
> +#define EFI_AHCI_PORT_IS_FIS_CLEAR 0x0000000F
> +
> +#define EFI_AHCI_PORT_IE 0x0014
> +#define EFI_AHCI_PORT_CMD 0x0018
> +#define EFI_AHCI_PORT_CMD_ST_MASK 0xFFFFFFFE
> +#define EFI_AHCI_PORT_CMD_ST BIT0
> +#define EFI_AHCI_PORT_CMD_SUD BIT1
> +#define EFI_AHCI_PORT_CMD_POD BIT2
> +#define EFI_AHCI_PORT_CMD_COL BIT3
> +#define EFI_AHCI_PORT_CMD_CR BIT15
> +#define EFI_AHCI_PORT_CMD_FRE BIT4
> +#define EFI_AHCI_PORT_CMD_FR BIT14
> +#define EFI_AHCI_PORT_CMD_MASK
> ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE |
> EFI_AHCI_PORT_CMD_COL)
> +#define EFI_AHCI_PORT_CMD_PMA BIT17
> +#define EFI_AHCI_PORT_CMD_HPCP BIT18
> +#define EFI_AHCI_PORT_CMD_MPSP BIT19
> +#define EFI_AHCI_PORT_CMD_CPD BIT20
> +#define EFI_AHCI_PORT_CMD_ESP BIT21
> +#define EFI_AHCI_PORT_CMD_ATAPI BIT24
> +#define EFI_AHCI_PORT_CMD_DLAE BIT25
> +#define EFI_AHCI_PORT_CMD_ALPE BIT26
> +#define EFI_AHCI_PORT_CMD_ASP BIT27
> +#define EFI_AHCI_PORT_CMD_ICC_MASK (BIT28 | BIT29 |
> BIT30 | BIT31)
> +#define EFI_AHCI_PORT_CMD_ACTIVE (1 << 28 )
> +#define EFI_AHCI_PORT_TFD 0x0020
> +#define EFI_AHCI_PORT_TFD_MASK (BIT7 | BIT3 | BIT0)
> +#define EFI_AHCI_PORT_TFD_BSY BIT7
> +#define EFI_AHCI_PORT_TFD_DRQ BIT3
> +#define EFI_AHCI_PORT_TFD_ERR BIT0
> +#define EFI_AHCI_PORT_TFD_ERR_MASK 0x00FF00
> +#define EFI_AHCI_PORT_SIG 0x0024
> +#define EFI_AHCI_PORT_SSTS 0x0028
> +#define EFI_AHCI_PORT_SSTS_DET_MASK 0x000F
> +#define EFI_AHCI_PORT_SSTS_DET 0x0001
> +#define EFI_AHCI_PORT_SSTS_DET_PCE 0x0003
> +#define EFI_AHCI_PORT_SSTS_SPD_MASK 0x00F0
> +#define EFI_AHCI_PORT_SCTL 0x002C
> +#define EFI_AHCI_PORT_SCTL_DET_MASK 0x000F
> +#define EFI_AHCI_PORT_SCTL_MASK
> (~EFI_AHCI_PORT_SCTL_DET_MASK)
> +#define EFI_AHCI_PORT_SCTL_DET_INIT 0x0001
> +#define EFI_AHCI_PORT_SCTL_DET_PHYCOMM 0x0003
> +#define EFI_AHCI_PORT_SCTL_SPD_MASK 0x00F0
> +#define EFI_AHCI_PORT_SCTL_IPM_MASK 0x0F00
> +#define EFI_AHCI_PORT_SCTL_IPM_INIT 0x0300
> +#define EFI_AHCI_PORT_SCTL_IPM_PSD 0x0100
> +#define EFI_AHCI_PORT_SCTL_IPM_SSD 0x0200
> +#define EFI_AHCI_PORT_SERR 0x0030
> +#define EFI_AHCI_PORT_SERR_RDIE BIT0
> +#define EFI_AHCI_PORT_SERR_RCE BIT1
> +#define EFI_AHCI_PORT_SERR_TDIE BIT8
> +#define EFI_AHCI_PORT_SERR_PCDIE BIT9
> +#define EFI_AHCI_PORT_SERR_PE BIT10
> +#define EFI_AHCI_PORT_SERR_IE BIT11
> +#define EFI_AHCI_PORT_SERR_PRC BIT16
> +#define EFI_AHCI_PORT_SERR_PIE BIT17
> +#define EFI_AHCI_PORT_SERR_CW BIT18
> +#define EFI_AHCI_PORT_SERR_BDE BIT19
> +#define EFI_AHCI_PORT_SERR_DE BIT20
> +#define EFI_AHCI_PORT_SERR_CRCE BIT21
> +#define EFI_AHCI_PORT_SERR_HE BIT22
> +#define EFI_AHCI_PORT_SERR_LSE BIT23
> +#define EFI_AHCI_PORT_SERR_TSTE BIT24
> +#define EFI_AHCI_PORT_SERR_UFT BIT25
> +#define EFI_AHCI_PORT_SERR_EX BIT26
> +#define EFI_AHCI_PORT_ERR_CLEAR 0xFFFFFFFF
> +#define EFI_AHCI_PORT_SACT 0x0034
> +#define EFI_AHCI_PORT_CI 0x0038
> +#define EFI_AHCI_PORT_SNTF 0x003C
> +
> +
> +#pragma pack(1)
> +//
> +// Command List structure includes total 32 entries.
> +// The entry Data structure is listed at the following.
> +//
> +typedef struct {
> + UINT32 AhciCmdCfl:5; //Command FIS Length
> + UINT32 AhciCmdA:1; //ATAPI
> + UINT32 AhciCmdW:1; //Write
> + UINT32 AhciCmdP:1; //Prefetchable
> + UINT32 AhciCmdR:1; //Reset
> + UINT32 AhciCmdB:1; //BIST
> + UINT32 AhciCmdC:1; //Clear Busy upon R_OK
> + UINT32 AhciCmdRsvd:1;
> + UINT32 AhciCmdPmp:4; //Port Multiplier Port
> + UINT32 AhciCmdPrdtl:16; //Physical Region Descriptor Table Length
> + UINT32 AhciCmdPrdbc; //Physical Region Descriptor Byte Count
> + UINT32 AhciCmdCtba; //Command Table Descriptor Base Address
> + UINT32 AhciCmdCtbau; //Command Table Descriptor Base Address
> Upper 32-BITs
> + UINT32 AhciCmdRsvd1[4];
> +} EFI_AHCI_COMMAND_LIST;
> +
> +//
> +// This is a software constructed FIS.
> +// For Data transfer operations, this is the H2D Register FIS format as
> +// specified in the Serial ATA Revision 2.6 specification.
> +//
> +typedef struct {
> + UINT8 AhciCFisType;
> + UINT8 AhciCFisPmNum:4;
> + UINT8 AhciCFisRsvd:1;
> + UINT8 AhciCFisRsvd1:1;
> + UINT8 AhciCFisRsvd2:1;
> + UINT8 AhciCFisCmdInd:1;
> + UINT8 AhciCFisCmd;
> + UINT8 AhciCFisFeature;
> + UINT8 AhciCFisSecNum;
> + UINT8 AhciCFisClyLow;
> + UINT8 AhciCFisClyHigh;
> + UINT8 AhciCFisDevHead;
> + UINT8 AhciCFisSecNumExp;
> + UINT8 AhciCFisClyLowExp;
> + UINT8 AhciCFisClyHighExp;
> + UINT8 AhciCFisFeatureExp;
> + UINT8 AhciCFisSecCount;
> + UINT8 AhciCFisSecCountExp;
> + UINT8 AhciCFisRsvd3;
> + UINT8 AhciCFisControl;
> + UINT8 AhciCFisRsvd4[4];
> + UINT8 AhciCFisRsvd5[44];
> +} EFI_AHCI_COMMAND_FIS;
> +
> +//
> +// ACMD: ATAPI command (12 or 16 bytes)
> +//
> +typedef struct {
> + UINT8 AtapiCmd[0x10];
> +} EFI_AHCI_ATAPI_COMMAND;
> +
> +//
> +// Physical Region Descriptor Table includes up to 65535 entries
> +// The entry Data structure is listed at the following.
> +// the actual entry number comes from the PRDTL field in the command
> +// list entry for this command slot.
> +//
> +typedef struct {
> + UINT32 AhciPrdtDba; //Data Base Address
> + UINT32 AhciPrdtDbau; //Data Base Address Upper 32-BITs
> + UINT32 AhciPrdtRsvd;
> + UINT32 AhciPrdtDbc:22; //Data Byte Count
> + UINT32 AhciPrdtRsvd1:9;
> + UINT32 AhciPrdtIoc:1; //Interrupt on Completion
> +} EFI_AHCI_COMMAND_PRDT;
> +
> +//
> +// Command table Data strucute which is pointed to by the entry in the
> command list
> +//
> +typedef struct {
> + EFI_AHCI_COMMAND_FIS CommandFis; // A software
> constructed FIS.
> + EFI_AHCI_ATAPI_COMMAND AtapiCmd; // 12 or 16 bytes
> ATAPI cmd.
> + UINT8 Reserved[0x30];
> + EFI_AHCI_COMMAND_PRDT PrdtTable; // The scatter/gather list
> for Data transfer
> +} EFI_AHCI_COMMAND_TABLE;
> +
> +//
> +// Received FIS structure
> +//
> +typedef struct {
> + UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00
> + UINT8 AhciDmaSetupFisRsvd[0x04];
> + UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20
> + UINT8 AhciPioSetupFisRsvd[0x0C];
> + UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40
> + UINT8 AhciD2HRegisterFisRsvd[0x04];
> + UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58
> + UINT8 AhciUnknownFis[0x40]; // Unkonwn Fis: offset 0x60
> + UINT8 AhciUnknownFisRsvd[0x60];
> +} EFI_AHCI_RECEIVED_FIS;
> +
> +#pragma pack()
> +
> +typedef struct {
> + EFI_AHCI_RECEIVED_FIS *AhciRFis;
> + VOID *AhciRFisMapping;
> + EFI_AHCI_COMMAND_LIST *AhciCmdList;
> + VOID *AhciCmdListMapping;
> + EFI_AHCI_COMMAND_TABLE *AhciCommandTable;
> + VOID *AhciCommandTableMapping;
> +} EFI_AHCI_REGISTERS;
> +
> +typedef struct {
> + VOID *Buffer;
> + VOID *BufferMapping;
> + EFI_AHCI_REGISTERS AhciRegisters;
> + UINT32 AhciBar;
> +} AHCI_CONTEXT;
> +
> +/**
> + Send Buffer cmd to specific device.
> +
> + @param AhciContext The pointer to the AHCI_CONTEXT.
> + @param Port The number of port.
> + @param PortMultiplier The timeout Value of stop.
> + @param Buffer The Data Buffer to store IDENTIFY PACKET
> Data.
> +
> + @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_UNSUPPORTED The device is not ready for executing.
> + @retval EFI_SUCCESS The cmd executes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciIdentify (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN OUT ATA_IDENTIFY_DATA *Buffer
> + );
> +
> +/**
> + Allocate transfer-related data struct which is used at AHCI mode.
> +
> + @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
> +
> + @retval EFI_OUT_OF_RESOURCE No enough resource.
> + @retval EFI_SUCCESS Successful to allocate resource.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciAllocateResource (
> + IN OUT AHCI_CONTEXT *AhciContext
> + );
> +
> +/**
> + Free allocated transfer-related data struct which is used at AHCI mode.
> +
> + @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciFreeResource (
> + IN OUT AHCI_CONTEXT *AhciContext
> + );
> +
> +/**
> + Initialize ATA host controller at AHCI mode.
> +
> + The function is designed to initialize ATA host controller.
> +
> + @param[in] AhciContext The pointer to the AHCI_CONTEXT.
> + @param[in] Port The port number to do initialization.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciModeInitialize (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port
> + );
> +
> +typedef struct _EFI_ATA_COMMAND_BLOCK {
> + UINT8 Reserved1[2];
> + UINT8 AtaCommand;
> + UINT8 AtaFeatures;
> + UINT8 AtaSectorNumber;
> + UINT8 AtaCylinderLow;
> + UINT8 AtaCylinderHigh;
> + UINT8 AtaDeviceHead;
> + UINT8 AtaSectorNumberExp;
> + UINT8 AtaCylinderLowExp;
> + UINT8 AtaCylinderHighExp;
> + UINT8 AtaFeaturesExp;
> + UINT8 AtaSectorCount;
> + UINT8 AtaSectorCountExp;
> + UINT8 Reserved2[6];
> +} EFI_ATA_COMMAND_BLOCK;
> +
> +typedef struct _EFI_ATA_STATUS_BLOCK {
> + UINT8 Reserved1[2];
> + UINT8 AtaStatus;
> + UINT8 AtaError;
> + UINT8 AtaSectorNumber;
> + UINT8 AtaCylinderLow;
> + UINT8 AtaCylinderHigh;
> + UINT8 AtaDeviceHead;
> + UINT8 AtaSectorNumberExp;
> + UINT8 AtaCylinderLowExp;
> + UINT8 AtaCylinderHighExp;
> + UINT8 Reserved2;
> + UINT8 AtaSectorCount;
> + UINT8 AtaSectorCountExp;
> + UINT8 Reserved3[6];
> +} EFI_ATA_STATUS_BLOCK;
> +
> +/**
> + Start a PIO Data transfer on specific port.
> +
> + @param AhciContext The pointer to the AHCI_CONTEXT.
> + @param Port The number of port.
> + @param PortMultiplier The timeout Value of stop.
> + @param AtapiCommand The atapi command will be used for the
> transfer.
> + @param AtapiCommandLength The Length of the atapi command.
> + @param Read The transfer direction.
> + @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
> + @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
> + @param MemoryAddr The pointer to the Data Buffer.
> + @param DataCount The Data count to be transferred.
> + @param Timeout The timeout Value of non Data transfer.
> +
> + @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error
> occurs.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_UNSUPPORTED The device is not ready for transfer.
> + @retval EFI_SUCCESS The PIO Data transfer executes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciPioTransfer (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
> + IN UINT8 AtapiCommandLength,
> + IN BOOLEAN Read,
> + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
> + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
> + IN OUT VOID *MemoryAddr,
> + IN UINT32 DataCount,
> + IN UINT64 Timeout
> + );
> +
> +
> +#endif
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
> new file mode 100644
> index 000000000000..62a71d9f440f
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
> @@ -0,0 +1,3003 @@
> +/** @file
> + Entrypoint of Opal UEFI Driver and contains all the logic to
> + register for new Opal device instances.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +// This UEFI driver consumes EFI_STORAGE_SECURITY_PROTOCOL instances
> and installs an
> +// HII GUI to manage Opal features if the device is Opal capable
> +// If the Opal device is being managed by the UEFI Driver, it shall provide a
> popup
> +// window during boot requesting a user password
> +
> +#include "OpalDriver.h"
> +#include "OpalHii.h"
> +
> +EFI_GUID mOpalDeviceAtaGuid = OPAL_DEVICE_ATA_GUID;
> +EFI_GUID mOpalDeviceNvmeGuid = OPAL_DEVICE_NVME_GUID;
> +
> +BOOLEAN mOpalEndOfDxe = FALSE;
> +OPAL_REQUEST_VARIABLE *mOpalRequestVariable = NULL;
> +UINTN mOpalRequestVariableSize = 0;
> +CHAR16 mPopUpString[256];
> +
> +typedef struct {
> + UINT32 Address;
> + S3_BOOT_SCRIPT_LIB_WIDTH Width;
> +} OPAL_HC_PCI_REGISTER_SAVE;
> +
> +//
> +// To unlock the Intel SATA controller at S3 Resume, restored the following
> registers.
> +//
> +const OPAL_HC_PCI_REGISTER_SAVE mSataHcRegisterSaveTemplate[] = {
> + {0x9, S3BootScriptWidthUint8},
> + {0x10, S3BootScriptWidthUint32},
> + {0x14, S3BootScriptWidthUint32},
> + {0x18, S3BootScriptWidthUint32},
> + {0x1C, S3BootScriptWidthUint32},
> + {0x20, S3BootScriptWidthUint32},
> + {0x24, S3BootScriptWidthUint32},
> + {0x3c, S3BootScriptWidthUint8},
> + {0x3d, S3BootScriptWidthUint8},
> + {0x40, S3BootScriptWidthUint16},
> + {0x42, S3BootScriptWidthUint16},
> + {0x92, S3BootScriptWidthUint16},
> + {0x94, S3BootScriptWidthUint32},
> + {0x9C, S3BootScriptWidthUint32},
> + {0x4, S3BootScriptWidthUint16},
> +};
> +
> +OPAL_DRIVER mOpalDriver;
> +
> +//
> +// Globals
> +//
> +EFI_DRIVER_BINDING_PROTOCOL gOpalDriverBinding = {
> + OpalEfiDriverBindingSupported,
> + OpalEfiDriverBindingStart,
> + OpalEfiDriverBindingStop,
> + 0x1b,
> + NULL,
> + NULL
> +};
> +
> +/**
> +
> + The function determines the available actions for the OPAL_DISK provided.
> +
> + @param[in] SupportedAttributes The supported attributes for the
> device.
> + @param[in] LockingFeature The locking status for the device.
> + @param[in] OwnerShip The ownership for the device.
> + @param[out] AvalDiskActions Pointer to fill-out with appropriate
> disk actions.
> +
> +**/
> +TCG_RESULT
> +EFIAPI
> +OpalSupportGetAvailableActions(
> + IN OPAL_DISK_SUPPORT_ATTRIBUTE *SupportedAttributes,
> + IN TCG_LOCKING_FEATURE_DESCRIPTOR *LockingFeature,
> + IN UINT16 OwnerShip,
> + OUT OPAL_DISK_ACTIONS *AvalDiskActions
> + )
> +{
> + BOOLEAN ExistingPassword;
> +
> + NULL_CHECK(AvalDiskActions);
> +
> + AvalDiskActions->AdminPass = 1;
> + AvalDiskActions->UserPass = 0;
> + AvalDiskActions->DisableUser = 0;
> + AvalDiskActions->Unlock = 0;
> +
> + //
> + // Revert is performed on locking sp, so only allow if locking sp is enabled
> + //
> + if (LockingFeature->LockingEnabled) {
> + AvalDiskActions->Revert = 1;
> + }
> +
> + //
> + // Psid revert is available for any device with media encryption support
> + // Revert is allowed for any device with media encryption support, however
> it requires
> + //
> + if (SupportedAttributes->MediaEncryption) {
> +
> + //
> + // Only allow psid revert if media encryption is enabled.
> + // Otherwise, someone who steals a disk can psid revert the disk and the
> user Data is still
> + // intact and accessible
> + //
> + AvalDiskActions->PsidRevert = 1;
> + AvalDiskActions->RevertKeepDataForced = 0;
> +
> + //
> + // Secure erase is performed by generating a new encryption key
> + // this is only available if encryption is supported
> + //
> + AvalDiskActions->SecureErase = 1;
> + } else {
> + AvalDiskActions->PsidRevert = 0;
> + AvalDiskActions->SecureErase = 0;
> +
> + //
> + // If no media encryption is supported, then a revert (using password) will
> not
> + // erase the Data (since you can't generate a new encryption key)
> + //
> + AvalDiskActions->RevertKeepDataForced = 1;
> + }
> +
> + if (LockingFeature->Locked) {
> + AvalDiskActions->Unlock = 1;
> + } else {
> + AvalDiskActions->Unlock = 0;
> + }
> +
> + //
> + // Only allow user to set password if an admin password exists
> + //
> + ExistingPassword = OpalUtilAdminPasswordExists(OwnerShip,
> LockingFeature);
> + AvalDiskActions->UserPass = ExistingPassword;
> +
> + //
> + // This will still show up even if there isn't a user, which is fine
> + //
> + AvalDiskActions->DisableUser = ExistingPassword;
> +
> + return TcgResultSuccess;
> +}
> +
> +/**
> + Enable Opal Feature for the input device.
> +
> + @param[in] Session The opal session for the opal device.
> + @param[in] Msid Msid
> + @param[in] MsidLength Msid Length
> + @param[in] Password Admin password
> + @param[in] PassLength Length of password in bytes
> +
> +**/
> +TCG_RESULT
> +EFIAPI
> +OpalSupportEnableOpalFeature (
> + IN OPAL_SESSION *Session,
> + IN VOID *Msid,
> + IN UINT32 MsidLength,
> + IN VOID *Password,
> + IN UINT32 PassLength
> + )
> +{
> + TCG_RESULT Ret;
> +
> + NULL_CHECK(Session);
> + NULL_CHECK(Msid);
> + NULL_CHECK(Password);
> +
> + Ret = OpalUtilSetAdminPasswordAsSid(
> + Session,
> + Msid,
> + MsidLength,
> + Password,
> + PassLength
> + );
> + if (Ret == TcgResultSuccess) {
> + //
> + // Enable global locking range
> + //
> + Ret = OpalUtilSetOpalLockingRange(
> + Session,
> + Password,
> + PassLength,
> +
> OPAL_LOCKING_SP_LOCKING_GLOBALRANGE,
> + 0,
> + 0,
> + TRUE,
> + TRUE,
> + FALSE,
> + FALSE
> + );
> + }
> +
> + return Ret;
> +}
> +
> +/**
> + Update password for the Opal disk.
> +
> + @param[in, out] OpalDisk The disk to update password.
> + @param[in] Password The input password.
> + @param[in] PasswordLength The input password length.
> +
> +**/
> +VOID
> +OpalSupportUpdatePassword (
> + IN OUT OPAL_DISK *OpalDisk,
> + IN VOID *Password,
> + IN UINT32 PasswordLength
> + )
> +{
> + CopyMem (OpalDisk->Password, Password, PasswordLength);
> + OpalDisk->PasswordLength = (UINT8) PasswordLength;
> +}
> +
> +/**
> + Extract device info from the device path.
> +
> + @param[in] DevicePath Device path info for the device.
> + @param[out] DevInfoLength Device information length needed.
> + @param[out] DevInfo Device information extracted.
> +
> + @return Device type.
> +
> +**/
> +UINT8
> +ExtractDeviceInfoFromDevicePath (
> + IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
> + OUT UINT16 *DevInfoLength,
> + OUT OPAL_DEVICE_COMMON *DevInfo OPTIONAL
> + )
> +{
> + EFI_DEVICE_PATH_PROTOCOL *TmpDevPath;
> + EFI_DEVICE_PATH_PROTOCOL *TmpDevPath2;
> + PCI_DEVICE_PATH *PciDevPath;
> + UINT8 DeviceType;
> + UINT8 BusNum;
> + OPAL_PCI_DEVICE *PciDevice;
> + OPAL_DEVICE_ATA *DevInfoAta;
> + OPAL_DEVICE_NVME *DevInfoNvme;
> + SATA_DEVICE_PATH *SataDevPath;
> + NVME_NAMESPACE_DEVICE_PATH *NvmeDevPath;
> +
> + ASSERT (DevicePath != NULL);
> + ASSERT (DevInfoLength != NULL);
> +
> + DeviceType = OPAL_DEVICE_TYPE_UNKNOWN;
> + *DevInfoLength = 0;
> +
> + TmpDevPath = DevicePath;
> +
> + //
> + // Get device type.
> + //
> + while (!IsDevicePathEnd (TmpDevPath)) {
> + if (TmpDevPath->Type == MESSAGING_DEVICE_PATH &&
> TmpDevPath->SubType == MSG_SATA_DP) {
> + //
> + // SATA
> + //
> + if (DevInfo != NULL) {
> + SataDevPath = (SATA_DEVICE_PATH *) TmpDevPath;
> + DevInfoAta = (OPAL_DEVICE_ATA *) DevInfo;
> + DevInfoAta->Port = SataDevPath->HBAPortNumber;
> + DevInfoAta->PortMultiplierPort =
> SataDevPath->PortMultiplierPortNumber;
> + }
> + DeviceType = OPAL_DEVICE_TYPE_ATA;
> + *DevInfoLength = sizeof (OPAL_DEVICE_ATA);
> + break;
> + } else if (TmpDevPath->Type == MESSAGING_DEVICE_PATH &&
> TmpDevPath->SubType == MSG_NVME_NAMESPACE_DP) {
> + //
> + // NVMe
> + //
> + if (DevInfo != NULL) {
> + NvmeDevPath = (NVME_NAMESPACE_DEVICE_PATH *) TmpDevPath;
> + DevInfoNvme = (OPAL_DEVICE_NVME *) DevInfo;
> + DevInfoNvme->NvmeNamespaceId = NvmeDevPath->NamespaceId;
> + }
> + DeviceType = OPAL_DEVICE_TYPE_NVME;
> + *DevInfoLength = sizeof (OPAL_DEVICE_NVME);
> + break;
> + }
> + TmpDevPath = NextDevicePathNode (TmpDevPath);
> + }
> +
> + //
> + // Get device info.
> + //
> + BusNum = 0;
> + TmpDevPath = DevicePath;
> + TmpDevPath2 = NextDevicePathNode (DevicePath);
> + while (!IsDevicePathEnd (TmpDevPath2)) {
> + if (TmpDevPath->Type == HARDWARE_DEVICE_PATH &&
> TmpDevPath->SubType == HW_PCI_DP) {
> + PciDevPath = (PCI_DEVICE_PATH *) TmpDevPath;
> + if ((TmpDevPath2->Type == MESSAGING_DEVICE_PATH &&
> TmpDevPath2->SubType == MSG_NVME_NAMESPACE_DP)||
> + (TmpDevPath2->Type == MESSAGING_DEVICE_PATH &&
> TmpDevPath2->SubType == MSG_SATA_DP)) {
> + if (DevInfo != NULL) {
> + PciDevice = &DevInfo->Device;
> + PciDevice->Segment = 0;
> + PciDevice->Bus = BusNum;
> + PciDevice->Device = PciDevPath->Device;
> + PciDevice->Function = PciDevPath->Function;
> + }
> + } else {
> + if (DevInfo != NULL) {
> + PciDevice = (OPAL_PCI_DEVICE *) ((UINTN) DevInfo +
> *DevInfoLength);
> + PciDevice->Segment = 0;
> + PciDevice->Bus = BusNum;
> + PciDevice->Device = PciDevPath->Device;
> + PciDevice->Function = PciDevPath->Function;
> + }
> + *DevInfoLength += sizeof (OPAL_PCI_DEVICE);
> + if (TmpDevPath2->Type == HARDWARE_DEVICE_PATH &&
> TmpDevPath2->SubType == HW_PCI_DP) {
> + BusNum = PciRead8 (PCI_LIB_ADDRESS (BusNum,
> PciDevPath->Device, PciDevPath->Function,
> PCI_BRIDGE_SECONDARY_BUS_REGISTER_OFFSET));
> + }
> + }
> + }
> +
> + TmpDevPath = NextDevicePathNode (TmpDevPath);
> + TmpDevPath2 = NextDevicePathNode (TmpDevPath2);
> + }
> +
> + ASSERT (DeviceType != OPAL_DEVICE_TYPE_UNKNOWN);
> + return DeviceType;
> +}
> +
> +/**
> + Save boot script for ATA OPAL device.
> +
> + @param[in] DevInfo Pointer to ATA Opal device information.
> +
> + **/
> +VOID
> +OpalDeviceAtaSaveBootScript (
> + IN OPAL_DEVICE_ATA *DevInfo
> + )
> +{
> + UINTN Bus;
> + UINTN Device;
> + UINTN Function;
> + UINTN Index;
> + EFI_STATUS Status;
> + UINTN Offset;
> + UINT64 Address;
> + S3_BOOT_SCRIPT_LIB_WIDTH Width;
> + UINT32 Data;
> + OPAL_HC_PCI_REGISTER_SAVE *HcRegisterSaveListPtr;
> + UINTN Count;
> +
> + Data = 0;
> +
> + Bus = DevInfo->Device.Bus;
> + Device = DevInfo->Device.Device;
> + Function = DevInfo->Device.Function;
> +
> + HcRegisterSaveListPtr = (OPAL_HC_PCI_REGISTER_SAVE *)
> mSataHcRegisterSaveTemplate;
> + Count = sizeof (mSataHcRegisterSaveTemplate) / sizeof
> (OPAL_HC_PCI_REGISTER_SAVE);
> +
> + for (Index = 0; Index < Count; Index++) {
> + Offset = HcRegisterSaveListPtr[Index].Address;
> + Width = HcRegisterSaveListPtr[Index].Width;
> +
> + switch (Width) {
> + case S3BootScriptWidthUint8:
> + Data = (UINT32)PciRead8
> (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
> + break;
> + case S3BootScriptWidthUint16:
> + Data = (UINT32)PciRead16
> (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
> + break;
> + case S3BootScriptWidthUint32:
> + Data = PciRead32 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
> + break;
> + default:
> + ASSERT (FALSE);
> + break;
> + }
> +
> + Address = S3_BOOT_SCRIPT_LIB_PCI_ADDRESS (Bus, Device, Function,
> Offset);
> + Status = S3BootScriptSavePciCfgWrite (Width, Address, 1, &Data);
> + ASSERT_EFI_ERROR (Status);
> + }
> +}
> +
> +/**
> + Build ATA OPAL device info and save them to LockBox.
> +
> + @param[in] BarAddr Bar address allocated.
> +
> + **/
> +VOID
> +BuildOpalDeviceInfoAta (
> + IN UINT32 BarAddr
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 DeviceType;
> + OPAL_DEVICE_ATA *DevInfoAta;
> + OPAL_DEVICE_ATA *TempDevInfoAta;
> + UINTN DevInfoLengthAta;
> + UINT16 DevInfoLength;
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + //
> + // Build ATA OPAL device info and save them to LockBox.
> + //
> + DevInfoLengthAta = 0;
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + DeviceType = ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + NULL
> + );
> + if (DeviceType == OPAL_DEVICE_TYPE_ATA) {
> + DevInfoLengthAta += DevInfoLength;
> + }
> +
> + TmpDev = TmpDev->Next;
> + }
> +
> + if (DevInfoLengthAta == 0) {
> + return;
> + }
> +
> + DevInfoAta = AllocateZeroPool (DevInfoLengthAta);
> + ASSERT (DevInfoAta != NULL);
> +
> + TempDevInfoAta = DevInfoAta;
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + DeviceType = ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + NULL
> + );
> + if (DeviceType == OPAL_DEVICE_TYPE_ATA) {
> + ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + (OPAL_DEVICE_COMMON *) TempDevInfoAta
> + );
> + TempDevInfoAta->Length = DevInfoLength;
> + TempDevInfoAta->OpalBaseComId =
> TmpDev->OpalDisk.OpalBaseComId;
> + TempDevInfoAta->BarAddr = BarAddr;
> + CopyMem (
> + TempDevInfoAta->Password,
> + TmpDev->OpalDisk.Password,
> + TmpDev->OpalDisk.PasswordLength
> + );
> + TempDevInfoAta->PasswordLength =
> TmpDev->OpalDisk.PasswordLength;
> + OpalDeviceAtaSaveBootScript (TempDevInfoAta);
> + TempDevInfoAta = (OPAL_DEVICE_ATA *) ((UINTN) TempDevInfoAta +
> DevInfoLength);
> + }
> +
> + TmpDev = TmpDev->Next;
> + }
> +
> + Status = SaveLockBox (
> + &mOpalDeviceAtaGuid,
> + DevInfoAta,
> + DevInfoLengthAta
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + Status = SetLockBoxAttributes (
> + &mOpalDeviceAtaGuid,
> + LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + ZeroMem (DevInfoAta, DevInfoLengthAta);
> + FreePool (DevInfoAta);
> +}
> +
> +/**
> + Build NVMe OPAL device info and save them to LockBox.
> +
> + @param[in] BarAddr Bar address allocated.
> +
> + **/
> +VOID
> +BuildOpalDeviceInfoNvme (
> + IN UINT32 BarAddr
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 DeviceType;
> + OPAL_DEVICE_NVME *DevInfoNvme;
> + OPAL_DEVICE_NVME *TempDevInfoNvme;
> + UINTN DevInfoLengthNvme;
> + UINT16 DevInfoLength;
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + //
> + // Build NVMe OPAL device info and save them to LockBox.
> + //
> + DevInfoLengthNvme = 0;
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + DeviceType = ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + NULL
> + );
> + if (DeviceType == OPAL_DEVICE_TYPE_NVME) {
> + DevInfoLengthNvme += DevInfoLength;
> + }
> +
> + TmpDev = TmpDev->Next;
> + }
> +
> + if (DevInfoLengthNvme == 0) {
> + return;
> + }
> +
> + DevInfoNvme = AllocateZeroPool (DevInfoLengthNvme);
> + ASSERT (DevInfoNvme != NULL);
> +
> + TempDevInfoNvme = DevInfoNvme;
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + DeviceType = ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + NULL
> + );
> + if (DeviceType == OPAL_DEVICE_TYPE_NVME) {
> + ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + (OPAL_DEVICE_COMMON *) TempDevInfoNvme
> + );
> + TempDevInfoNvme->Length = DevInfoLength;
> + TempDevInfoNvme->OpalBaseComId =
> TmpDev->OpalDisk.OpalBaseComId;
> + TempDevInfoNvme->BarAddr = BarAddr;
> + CopyMem (
> + TempDevInfoNvme->Password,
> + TmpDev->OpalDisk.Password,
> + TmpDev->OpalDisk.PasswordLength
> + );
> + TempDevInfoNvme->PasswordLength =
> TmpDev->OpalDisk.PasswordLength;
> + TempDevInfoNvme = (OPAL_DEVICE_NVME *) ((UINTN)
> TempDevInfoNvme + DevInfoLength);
> + }
> +
> + TmpDev = TmpDev->Next;
> + }
> +
> + Status = SaveLockBox (
> + &mOpalDeviceNvmeGuid,
> + DevInfoNvme,
> + DevInfoLengthNvme
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + Status = SetLockBoxAttributes (
> + &mOpalDeviceNvmeGuid,
> + LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + ZeroMem (DevInfoNvme, DevInfoLengthNvme);
> + FreePool (DevInfoNvme);
> +}
> +
> +/**
> + Notification function of EFI_END_OF_DXE_EVENT_GROUP_GUID event
> group.
> +
> + This is a notification function registered on
> EFI_END_OF_DXE_EVENT_GROUP_GUID event group.
> +
> + @param Event Event whose notification function is being invoked.
> + @param Context Pointer to the notification function's context.
> +
> +**/
> +VOID
> +EFIAPI
> +OpalEndOfDxeEventNotify (
> + EFI_EVENT Event,
> + VOID *Context
> + )
> +{
> + EFI_STATUS Status;
> + EFI_PHYSICAL_ADDRESS Address;
> + UINT64 Length;
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + mOpalEndOfDxe = TRUE;
> +
> + if (mOpalRequestVariable != NULL) {
> + //
> + // Free the OPAL request variable buffer here
> + // as the OPAL requests should have been processed.
> + //
> + FreePool (mOpalRequestVariable);
> + mOpalRequestVariable = NULL;
> + mOpalRequestVariableSize = 0;
> + }
> +
> + //
> + // Assume 64K size and alignment are enough.
> + //
> + Length = 0x10000;
> + Address = 0xFFFFFFFF;
> + Status = gDS->AllocateMemorySpace (
> + EfiGcdAllocateMaxAddressSearchBottomUp,
> + EfiGcdMemoryTypeMemoryMappedIo,
> + 16, // 2^16: 64K
> Alignment
> + Length,
> + &Address,
> + gImageHandle,
> + NULL
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + BuildOpalDeviceInfoAta ((UINT32) Address);
> + BuildOpalDeviceInfoNvme ((UINT32) Address);
> +
> + //
> + // Zero passsword.
> + //
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + ZeroMem (TmpDev->OpalDisk.Password,
> TmpDev->OpalDisk.PasswordLength);
> + TmpDev = TmpDev->Next;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +
> + gBS->CloseEvent (Event);
> +}
> +
> +/**
> + Get Psid input from the popup window.
> +
> + @param[in] Dev The device which need Psid to process Psid
> Revert
> + OPAL request.
> + @param[in] PopUpString Pop up string.
> + @param[out] PressEsc Whether user escape function through Press
> ESC.
> +
> + @retval Password string if success. NULL if failed.
> +
> +**/
> +CHAR8 *
> +OpalDriverPopUpPsidInput (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *PopUpString,
> + OUT BOOLEAN *PressEsc
> + )
> +{
> + EFI_INPUT_KEY InputKey;
> + UINTN InputLength;
> + CHAR16 Mask[PSID_CHARACTER_LENGTH + 1];
> + CHAR16 Unicode[PSID_CHARACTER_LENGTH + 1];
> + CHAR8 *Ascii;
> +
> + ZeroMem(Unicode, sizeof(Unicode));
> + ZeroMem(Mask, sizeof(Mask));
> +
> + *PressEsc = FALSE;
> +
> + gST->ConOut->ClearScreen(gST->ConOut);
> +
> + InputLength = 0;
> + while (TRUE) {
> + Mask[InputLength] = L'_';
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &InputKey,
> + PopUpString,
> + L"---------------------",
> + Mask,
> + NULL
> + );
> +
> + //
> + // Check key.
> + //
> + if (InputKey.ScanCode == SCAN_NULL) {
> + //
> + // password finished
> + //
> + if (InputKey.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + //
> + // Add the null terminator.
> + //
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + break;
> + } else if ((InputKey.UnicodeChar == CHAR_NULL) ||
> + (InputKey.UnicodeChar == CHAR_TAB) ||
> + (InputKey.UnicodeChar == CHAR_LINEFEED)
> + ) {
> + continue;
> + } else {
> + //
> + // delete last key entered
> + //
> + if (InputKey.UnicodeChar == CHAR_BACKSPACE) {
> + if (InputLength > 0) {
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + InputLength--;
> + }
> + } else {
> + //
> + // add Next key entry
> + //
> + Unicode[InputLength] = InputKey.UnicodeChar;
> + Mask[InputLength] = InputKey.UnicodeChar;
> + InputLength++;
> + if (InputLength == PSID_CHARACTER_LENGTH) {
> + //
> + // Add the null terminator.
> + //
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + break;
> + }
> + }
> + }
> + }
> +
> + //
> + // exit on ESC
> + //
> + if (InputKey.ScanCode == SCAN_ESC) {
> + *PressEsc = TRUE;
> + break;
> + }
> + }
> +
> + gST->ConOut->ClearScreen(gST->ConOut);
> +
> + if (InputLength == 0 || InputKey.ScanCode == SCAN_ESC) {
> + return NULL;
> + }
> +
> + Ascii = AllocateZeroPool (PSID_CHARACTER_LENGTH + 1);
> + if (Ascii == NULL) {
> + ZeroMem (Unicode, sizeof (Unicode));
> + ZeroMem (Mask, sizeof (Mask));
> + return NULL;
> + }
> +
> + UnicodeStrToAsciiStrS (Unicode, Ascii, PSID_CHARACTER_LENGTH + 1);
> + ZeroMem (Unicode, sizeof (Unicode));
> + ZeroMem (Mask, sizeof (Mask));
> +
> + return Ascii;
> +}
> +
> +
> +/**
> + Get password input from the popup window.
> +
> + @param[in] Dev The device which need password to unlock or
> + process OPAL request.
> + @param[in] PopUpString1 Pop up string 1.
> + @param[in] PopUpString2 Pop up string 2.
> + @param[out] PressEsc Whether user escape function through Press
> ESC.
> +
> + @retval Password string if success. NULL if failed.
> +
> +**/
> +CHAR8 *
> +OpalDriverPopUpPasswordInput (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *PopUpString1,
> + IN CHAR16 *PopUpString2,
> + OUT BOOLEAN *PressEsc
> + )
> +{
> + EFI_INPUT_KEY InputKey;
> + UINTN InputLength;
> + CHAR16 Mask[MAX_PASSWORD_SIZE + 1];
> + CHAR16 Unicode[MAX_PASSWORD_SIZE + 1];
> + CHAR8 *Ascii;
> +
> + ZeroMem(Unicode, sizeof(Unicode));
> + ZeroMem(Mask, sizeof(Mask));
> +
> + *PressEsc = FALSE;
> +
> + gST->ConOut->ClearScreen(gST->ConOut);
> +
> + InputLength = 0;
> + while (TRUE) {
> + Mask[InputLength] = L'_';
> + if (PopUpString2 == NULL) {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &InputKey,
> + PopUpString1,
> + L"---------------------",
> + Mask,
> + NULL
> + );
> + } else {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &InputKey,
> + PopUpString1,
> + PopUpString2,
> + L"---------------------",
> + Mask,
> + NULL
> + );
> + }
> +
> + //
> + // Check key.
> + //
> + if (InputKey.ScanCode == SCAN_NULL) {
> + //
> + // password finished
> + //
> + if (InputKey.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + //
> + // Add the null terminator.
> + //
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + break;
> + } else if ((InputKey.UnicodeChar == CHAR_NULL) ||
> + (InputKey.UnicodeChar == CHAR_TAB) ||
> + (InputKey.UnicodeChar == CHAR_LINEFEED)
> + ) {
> + continue;
> + } else {
> + //
> + // delete last key entered
> + //
> + if (InputKey.UnicodeChar == CHAR_BACKSPACE) {
> + if (InputLength > 0) {
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + InputLength--;
> + }
> + } else {
> + //
> + // add Next key entry
> + //
> + Unicode[InputLength] = InputKey.UnicodeChar;
> + Mask[InputLength] = L'*';
> + InputLength++;
> + if (InputLength == MAX_PASSWORD_SIZE) {
> + //
> + // Add the null terminator.
> + //
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + break;
> + }
> + }
> + }
> + }
> +
> + //
> + // exit on ESC
> + //
> + if (InputKey.ScanCode == SCAN_ESC) {
> + *PressEsc = TRUE;
> + break;
> + }
> + }
> +
> + gST->ConOut->ClearScreen(gST->ConOut);
> +
> + if (InputLength == 0 || InputKey.ScanCode == SCAN_ESC) {
> + return NULL;
> + }
> +
> + Ascii = AllocateZeroPool (MAX_PASSWORD_SIZE + 1);
> + if (Ascii == NULL) {
> + ZeroMem (Unicode, sizeof (Unicode));
> + return NULL;
> + }
> +
> + UnicodeStrToAsciiStrS (Unicode, Ascii, MAX_PASSWORD_SIZE + 1);
> + ZeroMem (Unicode, sizeof (Unicode));
> +
> + return Ascii;
> +}
> +
> +/**
> + Check if disk is locked, show popup window and ask for password if it is.
> +
> + @param[in] Dev The device which need to be unlocked.
> + @param[in] RequestString Request string.
> +
> +**/
> +CHAR16 *
> +OpalGetPopUpString (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINTN StrLength;
> +
> + StrLength = StrLen (RequestString) + 1 + MAX (StrLen (Dev->Name16),
> StrLen (L"Disk"));
> + ASSERT (StrLength < sizeof (mPopUpString) / sizeof (CHAR16));
> +
> + if (Dev->Name16 == NULL) {
> + UnicodeSPrint (mPopUpString, StrLength + 1, L"%s Disk", RequestString);
> + } else {
> + UnicodeSPrint (mPopUpString, StrLength + 1, L"%s %s", RequestString,
> Dev->Name16);
> + }
> +
> + return mPopUpString;
> +}
> +
> +/**
> + Check if disk is locked, show popup window and ask for password if it is.
> +
> + @param[in] Dev The device which need to be unlocked.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +OpalDriverRequestPassword (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + BOOLEAN IsEnabled;
> + BOOLEAN IsLocked;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + IsEnabled = OpalFeatureEnabled (&Dev->OpalDisk.SupportedAttributes,
> &Dev->OpalDisk.LockingFeature);
> + if (IsEnabled) {
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + IsLocked = OpalDeviceLocked (&Dev->OpalDisk.SupportedAttributes,
> &Dev->OpalDisk.LockingFeature);
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL,
> &PressEsc);
> + if (PressEsc) {
> + if (IsLocked) {
> + //
> + // Current device in the lock status and
> + // User not input password and press ESC,
> + // keep device in lock status and continue boot.
> + //
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + //
> + // Keep lock and continue boot.
> + //
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + } else {
> + //
> + // Current device in the unlock status and
> + // User not input password and press ESC,
> + // Shutdown the device.
> + //
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to shutdown, Press ESC to input password
> again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gRT->ResetSystem (EfiResetShutdown, EFI_SUCCESS, 0, NULL);
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + if (IsLocked) {
> + Ret = OpalUtilUpdateGlobalLockingRange(&Session, Password,
> PasswordLen, FALSE, FALSE);
> + } else {
> + Ret = OpalUtilUpdateGlobalLockingRange(&Session, Password,
> PasswordLen, TRUE, TRUE);
> + if (Ret == TcgResultSuccess) {
> + Ret = OpalUtilUpdateGlobalLockingRange(&Session, Password,
> PasswordLen, FALSE, FALSE);
> + }
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid password.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit. Must shutdown!",
> + L"Press ENTER to shutdown",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> +
> + gRT->ResetSystem (EfiResetShutdown, EFI_SUCCESS, 0, NULL);
> + }
> + }
> +}
> +
> +/**
> + Process Enable Feature OPAL request.
> +
> + @param[in] Dev The device which has Enable Feature OPAL
> request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestEnableFeature (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + CHAR8 *PasswordConfirm;
> + UINT32 PasswordLenConfirm;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please
> type in your new password", &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + PasswordConfirm = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please confirm your new password", &PressEsc);
> + if (PasswordConfirm == NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + Count ++;
> + continue;
> + }
> + PasswordLenConfirm = (UINT32) AsciiStrLen(PasswordConfirm);
> + if ((PasswordLen != PasswordLenConfirm) ||
> + (CompareMem (Password, PasswordConfirm, PasswordLen) != 0)) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Passwords are not the same.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> +
> + if (PasswordConfirm != NULL) {
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + }
> +
> + Ret = OpalSupportEnableOpalFeature (&Session, Dev->OpalDisk.Msid,
> Dev->OpalDisk.MsidLength, Password, PasswordLen);
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Disable User OPAL request.
> +
> + @param[in] Dev The device which has Disable User OPAL
> request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestDisableUser (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + BOOLEAN PasswordFailed;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL,
> &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + Ret = OpalUtilDisableUser(&Session, Password, PasswordLen,
> &PasswordFailed);
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid password, request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Psid Revert OPAL request.
> +
> + @param[in] Dev The device which has Psid Revert OPAL
> request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestPsidRevert (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Psid;
> + UINT32 PsidLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PSID_TRY_COUNT) {
> + Psid = OpalDriverPopUpPsidInput (Dev, PopUpString, &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input Psid again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input Psid again.
> + //
> + continue;
> + }
> + }
> +
> + if (Psid == NULL) {
> + Count ++;
> + continue;
> + }
> + PsidLen = (UINT32) AsciiStrLen(Psid);
> +
> + Ret = OpalUtilPsidRevert(&Session, Psid, PsidLen);
> + if (Ret == TcgResultSuccess) {
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Psid != NULL) {
> + ZeroMem (Psid, PsidLen);
> + FreePool (Psid);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid Psid, request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PSID_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal Psid retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Admin Revert OPAL request.
> +
> + @param[in] Dev The device which has Revert OPAL request.
> + @param[in] KeepUserData Whether to keep user data or not.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestRevert (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN BOOLEAN KeepUserData,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + BOOLEAN PasswordFailed;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL,
> &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + if ((Dev->OpalDisk.SupportedAttributes.PyriteSsc == 1) &&
> + (Dev->OpalDisk.LockingFeature.MediaEncryption == 0)) {
> + //
> + // For pyrite type device which does not support media encryption,
> + // it does not accept "Keep User Data" parameter.
> + // So here hardcode a FALSE for this case.
> + //
> + Ret = OpalUtilRevert(
> + &Session,
> + FALSE,
> + Password,
> + PasswordLen,
> + &PasswordFailed,
> + Dev->OpalDisk.Msid,
> + Dev->OpalDisk.MsidLength
> + );
> + } else {
> + Ret = OpalUtilRevert(
> + &Session,
> + KeepUserData,
> + Password,
> + PasswordLen,
> + &PasswordFailed,
> + Dev->OpalDisk.Msid,
> + Dev->OpalDisk.MsidLength
> + );
> + }
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid password, request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Secure Erase OPAL request.
> +
> + @param[in] Dev The device which has Secure Erase OPAL
> request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestSecureErase (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + BOOLEAN PasswordFailed;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL,
> &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + Ret = OpalUtilSecureErase(&Session, Password, PasswordLen,
> &PasswordFailed);
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid password, request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Set Admin Pwd OPAL request.
> +
> + @param[in] Dev The device which has Set Admin Pwd Feature
> OPAL request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestSetUserPwd (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *OldPassword;
> + UINT32 OldPasswordLen;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + CHAR8 *PasswordConfirm;
> + UINT32 PasswordLenConfirm;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + OldPassword = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please type in your password", &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (OldPassword == NULL) {
> + Count ++;
> + continue;
> + }
> + OldPasswordLen = (UINT32) AsciiStrLen(OldPassword);
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> + Ret = OpalUtilVerifyPassword (&Session, OldPassword, OldPasswordLen,
> OPAL_LOCKING_SP_USER1_AUTHORITY);
> + if (Ret == TcgResultSuccess) {
> + DEBUG ((DEBUG_INFO, "Verify with USER1 authority : Success\n"));
> + } else {
> + Ret = OpalUtilVerifyPassword (&Session, OldPassword, OldPasswordLen,
> OPAL_LOCKING_SP_ADMIN1_AUTHORITY);
> + if (Ret == TcgResultSuccess) {
> + DEBUG ((DEBUG_INFO, "Verify with ADMIN1 authority: Success\n"));
> + } else {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + DEBUG ((DEBUG_INFO, "Verify: Failure\n"));
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Incorrect password.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> + }
> +
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please
> type in your new password", &PressEsc);
> + if (Password == NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + PasswordConfirm = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please confirm your new password", &PressEsc);
> + if (PasswordConfirm == NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + Count ++;
> + continue;
> + }
> + PasswordLenConfirm = (UINT32) AsciiStrLen(PasswordConfirm);
> + if ((PasswordLen != PasswordLenConfirm) ||
> + (CompareMem (Password, PasswordConfirm, PasswordLen) != 0)) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Passwords are not the same.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> +
> + if (PasswordConfirm != NULL) {
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + }
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> + Ret = OpalUtilSetUserPassword(
> + &Session,
> + OldPassword,
> + OldPasswordLen,
> + Password,
> + PasswordLen
> + );
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (OldPassword != NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Set Admin Pwd OPAL request.
> +
> + @param[in] Dev The device which has Set Admin Pwd Feature
> OPAL request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestSetAdminPwd (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *OldPassword;
> + UINT32 OldPasswordLen;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + CHAR8 *PasswordConfirm;
> + UINT32 PasswordLenConfirm;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + OldPassword = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please type in your password", &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (OldPassword == NULL) {
> + Count ++;
> + continue;
> + }
> + OldPasswordLen = (UINT32) AsciiStrLen(OldPassword);
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> + Ret = OpalUtilVerifyPassword (&Session, OldPassword, OldPasswordLen,
> OPAL_LOCKING_SP_ADMIN1_AUTHORITY);
> + if (Ret == TcgResultSuccess) {
> + DEBUG ((DEBUG_INFO, "Verify: Success\n"));
> + } else {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + DEBUG ((DEBUG_INFO, "Verify: Failure\n"));
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Incorrect password.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> +
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please
> type in your new password", &PressEsc);
> + if (Password == NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + PasswordConfirm = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please confirm your new password", &PressEsc);
> + if (PasswordConfirm == NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + Count ++;
> + continue;
> + }
> + PasswordLenConfirm = (UINT32) AsciiStrLen(PasswordConfirm);
> + if ((PasswordLen != PasswordLenConfirm) ||
> + (CompareMem (Password, PasswordConfirm, PasswordLen) != 0)) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Passwords are not the same.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> +
> + if (PasswordConfirm != NULL) {
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + }
> +
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> + Ret = OpalUtilSetAdminPassword(
> + &Session,
> + OldPassword,
> + OldPasswordLen,
> + Password,
> + PasswordLen
> + );
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (OldPassword != NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process OPAL request.
> +
> + @param[in] Dev The device which has OPAL request.
> +
> +**/
> +VOID
> +ProcessOpalRequest (
> + IN OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + EFI_STATUS Status;
> + OPAL_REQUEST_VARIABLE *TempVariable;
> + OPAL_REQUEST_VARIABLE *Variable;
> + UINTN VariableSize;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePathInVariable;
> + UINTN DevicePathSizeInVariable;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePath;
> + UINTN DevicePathSize;
> + BOOLEAN KeepUserData;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + if (mOpalRequestVariable == NULL) {
> + Status = GetVariable2 (
> + OPAL_REQUEST_VARIABLE_NAME,
> + &gHiiSetupVariableGuid,
> + (VOID **) &Variable,
> + &VariableSize
> + );
> + if (EFI_ERROR (Status) || (Variable == NULL)) {
> + return;
> + }
> + mOpalRequestVariable = Variable;
> + mOpalRequestVariableSize = VariableSize;
> +
> + //
> + // Delete the OPAL request variable.
> + //
> + Status = gRT->SetVariable (
> + OPAL_REQUEST_VARIABLE_NAME,
> + (EFI_GUID *) &gHiiSetupVariableGuid,
> + 0,
> + 0,
> + NULL
> + );
> + ASSERT_EFI_ERROR (Status);
> + } else {
> + Variable = mOpalRequestVariable;
> + VariableSize = mOpalRequestVariableSize;
> + }
> +
> + //
> + // Process the OPAL requests.
> + //
> + TempVariable = Variable;
> + while ((VariableSize > sizeof (OPAL_REQUEST_VARIABLE)) &&
> + (VariableSize >= TempVariable->Length) &&
> + (TempVariable->Length > sizeof (OPAL_REQUEST_VARIABLE))) {
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + DevicePathSizeInVariable = GetDevicePathSize (DevicePathInVariable);
> + DevicePath = Dev->OpalDisk.OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + if ((DevicePathSize == DevicePathSizeInVariable) &&
> + (CompareMem (DevicePath, DevicePathInVariable, DevicePathSize)
> == 0)) {
> + //
> + // Found the node for the OPAL device.
> + //
> + if (TempVariable->OpalRequest.SetAdminPwd != 0) {
> + ProcessOpalRequestSetAdminPwd (Dev, L"Update Admin Pwd:");
> + }
> + if (TempVariable->OpalRequest.SetUserPwd != 0) {
> + ProcessOpalRequestSetUserPwd (Dev, L"Set User Pwd:");
> + }
> + if (TempVariable->OpalRequest.SecureErase!= 0) {
> + ProcessOpalRequestSecureErase (Dev, L"Secure Erase:");
> + }
> + if (TempVariable->OpalRequest.Revert != 0) {
> + KeepUserData = (BOOLEAN)
> TempVariable->OpalRequest.KeepUserData;
> + ProcessOpalRequestRevert (
> + Dev,
> + KeepUserData,
> + KeepUserData ? L"Admin Revert(keep):" : L"Admin Revert:"
> + );
> + }
> + if (TempVariable->OpalRequest.PsidRevert != 0) {
> + ProcessOpalRequestPsidRevert (Dev, L"Psid Revert:");
> + }
> + if (TempVariable->OpalRequest.DisableUser != 0) {
> + ProcessOpalRequestDisableUser (Dev, L"Disable User:");
> + }
> + if (TempVariable->OpalRequest.EnableFeature != 0) {
> + ProcessOpalRequestEnableFeature (Dev, L"Enable Feature:");
> + }
> +
> + break;
> + }
> +
> + VariableSize -= TempVariable->Length;
> + TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) TempVariable +
> TempVariable->Length);
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Add new device to the global device list.
> +
> + @param Dev New create device.
> +
> +**/
> +VOID
> +AddDeviceToTail(
> + IN OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + if (mOpalDriver.DeviceList == NULL) {
> + mOpalDriver.DeviceList = Dev;
> + } else {
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev->Next != NULL) {
> + TmpDev = TmpDev->Next;
> + }
> +
> + TmpDev->Next = Dev;
> + }
> +}
> +
> +/**
> + Remove one device in the global device list.
> +
> + @param Dev The device need to be removed.
> +
> +**/
> +VOID
> +RemoveDevice (
> + IN OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + if (mOpalDriver.DeviceList == NULL) {
> + return;
> + }
> +
> + if (mOpalDriver.DeviceList == Dev) {
> + mOpalDriver.DeviceList = NULL;
> + return;
> + }
> +
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev->Next != NULL) {
> + if (TmpDev->Next == Dev) {
> + TmpDev->Next = Dev->Next;
> + break;
> + }
> + }
> +}
> +
> +/**
> + Get current device count.
> +
> + @retval return the current created device count.
> +
> +**/
> +UINT8
> +GetDeviceCount (
> + VOID
> + )
> +{
> + UINT8 Count;
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + Count = 0;
> + TmpDev = mOpalDriver.DeviceList;
> +
> + while (TmpDev != NULL) {
> + Count++;
> + TmpDev = TmpDev->Next;
> + }
> +
> + return Count;
> +}
> +
> +/**
> + Get devcie list info.
> +
> + @retval return the device list pointer.
> +**/
> +OPAL_DRIVER_DEVICE*
> +OpalDriverGetDeviceList(
> + VOID
> + )
> +{
> + return mOpalDriver.DeviceList;
> +}
> +
> +/**
> + ReadyToBoot callback to send BlockSid command.
> +
> + @param Event Pointer to this event
> + @param Context Event handler private Data
> +
> +**/
> +VOID
> +EFIAPI
> +ReadyToBootCallback (
> + IN EFI_EVENT Event,
> + IN VOID *Context
> + )
> +{
> + OPAL_DRIVER_DEVICE *Itr;
> + TCG_RESULT Result;
> + OPAL_SESSION Session;
> + UINT32 PpStorageFlag;
> +
> + gBS->CloseEvent (Event);
> +
> + PpStorageFlag = Tcg2PhysicalPresenceLibGetManagementFlags ();
> + if ((PpStorageFlag &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
> + //
> + // Send BlockSID command to each Opal disk
> + //
> + Itr = mOpalDriver.DeviceList;
> + while (Itr != NULL) {
> + if (Itr->OpalDisk.SupportedAttributes.BlockSid) {
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Itr->OpalDisk.Sscp;
> + Session.MediaId = Itr->OpalDisk.MediaId;
> + Session.OpalBaseComId = Itr->OpalDisk.OpalBaseComId;
> +
> + Result = OpalBlockSid (&Session, TRUE); // HardwareReset must
> always be TRUE
> + if (Result != TcgResultSuccess) {
> + DEBUG ((DEBUG_ERROR, "OpalBlockSid fail\n"));
> + break;
> + }
> + }
> +
> + Itr = Itr->Next;
> + }
> + }
> +}
> +
> +/**
> + Stop this Controller.
> +
> + @param Dev The device need to be stopped.
> +
> +**/
> +VOID
> +OpalDriverStopDevice (
> + OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + //
> + // free each name
> + //
> + FreePool(Dev->Name16);
> +
> + //
> + // remove OPAL_DRIVER_DEVICE from the list
> + // it updates the controllerList pointer
> + //
> + RemoveDevice(Dev);
> +
> + //
> + // close protocols that were opened
> + //
> + gBS->CloseProtocol(
> + Dev->Handle,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + gOpalDriverBinding.DriverBindingHandle,
> + Dev->Handle
> + );
> +
> + gBS->CloseProtocol(
> + Dev->Handle,
> + &gEfiBlockIoProtocolGuid,
> + gOpalDriverBinding.DriverBindingHandle,
> + Dev->Handle
> + );
> +
> + FreePool(Dev);
> +}
> +
> +/**
> + Get devcie name through the component name protocol.
> +
> + @param[in] AllHandlesBuffer The handle buffer for current
> system.
> + @param[in] NumAllHandles The number of handles for the
> handle buffer.
> + @param[in] Dev The device which need to get
> name.
> + @param[in] UseComp1 Whether use component name
> or name2 protocol.
> +
> + @retval TRUE Find the name for this device.
> + @retval FALSE Not found the name for this device.
> +**/
> +BOOLEAN
> +OpalDriverGetDeviceNameByProtocol(
> + EFI_HANDLE *AllHandlesBuffer,
> + UINTN NumAllHandles,
> + OPAL_DRIVER_DEVICE *Dev,
> + BOOLEAN UseComp1
> + )
> +{
> + EFI_HANDLE* ProtocolHandlesBuffer;
> + UINTN NumProtocolHandles;
> + EFI_STATUS Status;
> + EFI_COMPONENT_NAME2_PROTOCOL* Cnp1_2; // efi component name
> and componentName2 have same layout
> + EFI_GUID Protocol;
> + UINTN StrLength;
> + EFI_DEVICE_PATH_PROTOCOL* TmpDevPath;
> + UINTN Index1;
> + UINTN Index2;
> + EFI_HANDLE TmpHandle;
> + CHAR16 *DevName;
> +
> + if (Dev == NULL || AllHandlesBuffer == NULL || NumAllHandles == 0) {
> + return FALSE;
> + }
> +
> + Protocol = UseComp1 ? gEfiComponentNameProtocolGuid :
> gEfiComponentName2ProtocolGuid;
> +
> + //
> + // Find all EFI_HANDLES with protocol
> + //
> + Status = gBS->LocateHandleBuffer(
> + ByProtocol,
> + &Protocol,
> + NULL,
> + &NumProtocolHandles,
> + &ProtocolHandlesBuffer
> + );
> + if (EFI_ERROR(Status)) {
> + return FALSE;
> + }
> +
> +
> + //
> + // Exit early if no supported devices
> + //
> + if (NumProtocolHandles == 0) {
> + return FALSE;
> + }
> +
> + //
> + // Get printable name by iterating through all protocols
> + // using the handle as the child, and iterate through all handles for the
> controller
> + // exit loop early once found, if not found, then delete device
> + // storage security protocol instances already exist, add them to internal list
> + //
> + Status = EFI_DEVICE_ERROR;
> + for (Index1 = 0; Index1 < NumProtocolHandles; Index1++) {
> + DevName = NULL;
> +
> + if (Dev->Name16 != NULL) {
> + return TRUE;
> + }
> +
> + TmpHandle = ProtocolHandlesBuffer[Index1];
> +
> + Status = gBS->OpenProtocol(
> + TmpHandle,
> + &Protocol,
> + (VOID**)&Cnp1_2,
> + gImageHandle,
> + NULL,
> + EFI_OPEN_PROTOCOL_GET_PROTOCOL
> + );
> + if (EFI_ERROR(Status) || Cnp1_2 == NULL) {
> + continue;
> + }
> +
> + //
> + // Use all handles array as controller handle
> + //
> + for (Index2 = 0; Index2 < NumAllHandles; Index2++) {
> + Status = Cnp1_2->GetControllerName(
> + Cnp1_2,
> + AllHandlesBuffer[Index2],
> + Dev->Handle,
> + LANGUAGE_ISO_639_2_ENGLISH,
> + &DevName
> + );
> + if (EFI_ERROR(Status)) {
> + Status = Cnp1_2->GetControllerName(
> + Cnp1_2,
> + AllHandlesBuffer[Index2],
> + Dev->Handle,
> + LANGUAGE_RFC_3066_ENGLISH,
> + &DevName
> + );
> + }
> + if (!EFI_ERROR(Status) && DevName != NULL) {
> + StrLength = StrLen(DevName) + 1; // Add one for NULL
> terminator
> + Dev->Name16 = AllocateZeroPool(StrLength * sizeof (CHAR16));
> + ASSERT (Dev->Name16 != NULL);
> + StrCpyS (Dev->Name16, StrLength, DevName);
> + Dev->NameZ = (CHAR8*)AllocateZeroPool(StrLength);
> + UnicodeStrToAsciiStrS (DevName, Dev->NameZ, StrLength);
> +
> + //
> + // Retrieve bridge BDF info and port number or namespace depending
> on type
> + //
> + TmpDevPath = NULL;
> + Status = gBS->OpenProtocol(
> + Dev->Handle,
> + &gEfiDevicePathProtocolGuid,
> + (VOID**)&TmpDevPath,
> + gImageHandle,
> + NULL,
> + EFI_OPEN_PROTOCOL_GET_PROTOCOL
> + );
> + if (!EFI_ERROR(Status)) {
> + Dev->OpalDevicePath = DuplicateDevicePath (TmpDevPath);
> + return TRUE;
> + }
> +
> + if (Dev->Name16 != NULL) {
> + FreePool(Dev->Name16);
> + Dev->Name16 = NULL;
> + }
> + if (Dev->NameZ != NULL) {
> + FreePool(Dev->NameZ);
> + Dev->NameZ = NULL;
> + }
> + }
> + }
> + }
> +
> + return FALSE;
> +}
> +
> +/**
> + Get devcie name through the component name protocol.
> +
> + @param[in] Dev The device which need to get
> name.
> +
> + @retval TRUE Find the name for this device.
> + @retval FALSE Not found the name for this device.
> +**/
> +BOOLEAN
> +OpalDriverGetDriverDeviceName(
> + OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + EFI_HANDLE* AllHandlesBuffer;
> + UINTN NumAllHandles;
> + EFI_STATUS Status;
> +
> + if (Dev == NULL) {
> + DEBUG((DEBUG_ERROR | DEBUG_INIT, "OpalDriverGetDriverDeviceName
> Exiting, Dev=NULL\n"));
> + return FALSE;
> + }
> +
> + //
> + // Iterate through ComponentName2 handles to get name, if fails, try
> ComponentName
> + //
> + if (Dev->Name16 == NULL) {
> + DEBUG((DEBUG_ERROR | DEBUG_INIT, "Name is null, update it\n"));
> + //
> + // Find all EFI_HANDLES
> + //
> + Status = gBS->LocateHandleBuffer(
> + AllHandles,
> + NULL,
> + NULL,
> + &NumAllHandles,
> + &AllHandlesBuffer
> + );
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_INFO, "LocateHandleBuffer for AllHandles failed %r\n",
> Status ));
> + return FALSE;
> + }
> +
> + //
> + // Try component Name2
> + //
> + if (!OpalDriverGetDeviceNameByProtocol(AllHandlesBuffer,
> NumAllHandles, Dev, FALSE)) {
> + DEBUG((DEBUG_ERROR | DEBUG_INIT, "ComponentName2 failed to get
> device name, try ComponentName\n"));
> + if (!OpalDriverGetDeviceNameByProtocol(AllHandlesBuffer,
> NumAllHandles, Dev, TRUE)) {
> + DEBUG((DEBUG_ERROR | DEBUG_INIT, "ComponentName failed to
> get device name, skip device\n"));
> + return FALSE;
> + }
> + }
> + }
> +
> + return TRUE;
> +}
> +
> +/**
> + Main entry for this driver.
> +
> + @param ImageHandle Image Handle this driver.
> + @param SystemTable Pointer to SystemTable.
> +
> + @retval EFI_SUCESS This function always complete successfully.
> +**/
> +EFI_STATUS
> +EFIAPI
> +EfiDriverEntryPoint(
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE* SystemTable
> + )
> +{
> + EFI_STATUS Status;
> + EFI_EVENT ReadyToBootEvent;
> + EFI_EVENT EndOfDxeEvent;
> +
> + Status = EfiLibInstallDriverBindingComponentName2 (
> + ImageHandle,
> + SystemTable,
> + &gOpalDriverBinding,
> + ImageHandle,
> + &gOpalComponentName,
> + &gOpalComponentName2
> + );
> +
> + if (EFI_ERROR(Status)) {
> + DEBUG((DEBUG_ERROR, "Install protocols to Opal driver Handle
> failed\n"));
> + return Status ;
> + }
> +
> + //
> + // Initialize Driver object
> + //
> + ZeroMem(&mOpalDriver, sizeof(mOpalDriver));
> + mOpalDriver.Handle = ImageHandle;
> +
> + Status = gBS->CreateEventEx (
> + EVT_NOTIFY_SIGNAL,
> + TPL_CALLBACK,
> + OpalEndOfDxeEventNotify,
> + NULL,
> + &gEfiEndOfDxeEventGroupGuid,
> + &EndOfDxeEvent
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + //
> + // register a ReadyToBoot event callback for sending BlockSid command
> + //
> + Status = EfiCreateEventReadyToBootEx (
> + TPL_CALLBACK,
> + ReadyToBootCallback,
> + (VOID *) &ImageHandle,
> + &ReadyToBootEvent
> + );
> +
> + //
> + // Install Hii packages.
> + //
> + HiiInstall();
> +
> + return Status;
> +}
> +
> +/**
> + Tests to see if this driver supports a given controller.
> +
> + This function checks to see if the controller contains an instance of the
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL and the
> EFI_BLOCK_IO_PROTOCL
> + and returns EFI_SUCCESS if it does.
> +
> + @param[in] This A pointer to the
> EFI_DRIVER_BINDING_PROTOCOL instance.
> + @param[in] ControllerHandle The Handle of the controller to test.
> This Handle
> + must support a protocol interface
> that supplies
> + an I/O abstraction to the driver.
> + @param[in] RemainingDevicePath This parameter is ignored.
> +
> + @retval EFI_SUCCESS The device contains required
> protocols
> + @retval EFI_ALREADY_STARTED The device specified by
> ControllerHandle and
> + RemainingDevicePath is already
> being managed by the driver
> + specified by This.
> + @retval EFI_ACCESS_DENIED The device specified by
> ControllerHandle and
> + RemainingDevicePath is already
> being managed by a different
> + driver or an application that requires
> exclusive access.
> + Currently not implemented.
> + @retval EFI_UNSUPPORTED The device does not contain
> requires protocols
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingSupported(
> + IN EFI_DRIVER_BINDING_PROTOCOL* This,
> + IN EFI_HANDLE Controller,
> + IN EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
> + )
> +{
> + EFI_STATUS Status;
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL* SecurityCommand;
> + EFI_BLOCK_IO_PROTOCOL* BlkIo;
> +
> + if (mOpalEndOfDxe) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + //
> + // Test EFI_STORAGE_SECURITY_COMMAND_PROTOCOL on controller
> Handle.
> + //
> + Status = gBS->OpenProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + ( VOID ** )&SecurityCommand,
> + This->DriverBindingHandle,
> + Controller,
> + EFI_OPEN_PROTOCOL_BY_DRIVER
> + );
> +
> + if (Status == EFI_ALREADY_STARTED) {
> + return EFI_SUCCESS;
> + }
> +
> + if (EFI_ERROR(Status)) {
> + return Status;
> + }
> +
> + //
> + // Close protocol and reopen in Start call
> + //
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + //
> + // Test EFI_BLOCK_IO_PROTOCOL on controller Handle, required by
> EFI_STORAGE_SECURITY_COMMAND_PROTOCOL
> + // function APIs
> + //
> + Status = gBS->OpenProtocol(
> + Controller,
> + &gEfiBlockIoProtocolGuid,
> + (VOID **)&BlkIo,
> + This->DriverBindingHandle,
> + Controller,
> + EFI_OPEN_PROTOCOL_BY_DRIVER
> + );
> +
> + if (EFI_ERROR(Status)) {
> + DEBUG((DEBUG_INFO, "No EFI_BLOCK_IO_PROTOCOL on controller\n"));
> + return Status;
> + }
> +
> + //
> + // Close protocol and reopen in Start call
> + //
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiBlockIoProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Enables Opal Management on a supported device if available.
> +
> + The start function is designed to be called after the Opal UEFI Driver has
> confirmed the
> + "controller", which is a child Handle, contains the
> EF_STORAGE_SECURITY_COMMAND protocols.
> + This function will complete the other necessary checks, such as verifying the
> device supports
> + the correct version of Opal. Upon verification, it will add the device to the
> + Opal HII list in order to expose Opal managmeent options.
> +
> + @param[in] This A pointer to the
> EFI_DRIVER_BINDING_PROTOCOL instance.
> + @param[in] ControllerHandle The Handle of the controller to start.
> This Handle
> + must support a protocol interface
> that supplies
> + an I/O abstraction to the driver.
> + @param[in] RemainingDevicePath A pointer to the remaining portion of
> a device path. This
> + parameter is ignored by device
> drivers, and is optional for bus
> + drivers. For a bus driver, if this
> parameter is NULL, then handles
> + for all the children of Controller are
> created by this driver.
> + If this parameter is not NULL and the
> first Device Path Node is
> + not the End of Device Path Node,
> then only the Handle for the
> + child device specified by the first
> Device Path Node of
> + RemainingDevicePath is created by
> this driver.
> + If the first Device Path Node of
> RemainingDevicePath is
> + the End of Device Path Node, no
> child Handle is created by this
> + driver.
> +
> + @retval EFI_SUCCESS Opal management was enabled.
> + @retval EFI_DEVICE_ERROR The device could not be started due
> to a device error.Currently not implemented.
> + @retval EFI_OUT_OF_RESOURCES The request could not be
> completed due to a lack of resources.
> + @retval Others The driver failed to start the device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingStart(
> + IN EFI_DRIVER_BINDING_PROTOCOL* This,
> + IN EFI_HANDLE Controller,
> + IN EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
> + )
> +{
> + EFI_STATUS Status;
> + EFI_BLOCK_IO_PROTOCOL *BlkIo;
> + OPAL_DRIVER_DEVICE *Dev;
> + OPAL_DRIVER_DEVICE *Itr;
> + BOOLEAN Result;
> +
> + Itr = mOpalDriver.DeviceList;
> + while (Itr != NULL) {
> + if (Controller == Itr->Handle) {
> + return EFI_SUCCESS;
> + }
> + Itr = Itr->Next;
> + }
> +
> + //
> + // Create internal device for tracking. This allows all disks to be tracked
> + // by same HII form
> + //
> + Dev =
> (OPAL_DRIVER_DEVICE*)AllocateZeroPool(sizeof(OPAL_DRIVER_DEVICE));
> + if (Dev == NULL) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + Dev->Handle = Controller;
> +
> + //
> + // Open EFI_STORAGE_SECURITY_COMMAND_PROTOCOL to perform Opal
> supported checks
> + //
> + Status = gBS->OpenProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + (VOID **)&Dev->Sscp,
> + This->DriverBindingHandle,
> + Controller,
> + EFI_OPEN_PROTOCOL_BY_DRIVER
> + );
> + if (EFI_ERROR(Status)) {
> + FreePool(Dev);
> + return Status;
> + }
> +
> + //
> + // Open EFI_BLOCK_IO_PROTOCOL on controller Handle, required by
> EFI_STORAGE_SECURITY_COMMAND_PROTOCOL
> + // function APIs
> + //
> + Status = gBS->OpenProtocol(
> + Controller,
> + &gEfiBlockIoProtocolGuid,
> + (VOID **)&BlkIo,
> + This->DriverBindingHandle,
> + Controller,
> + EFI_OPEN_PROTOCOL_BY_DRIVER
> + );
> + if (EFI_ERROR(Status)) {
> + //
> + // Close storage security that was opened
> + //
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + FreePool(Dev);
> + return Status;
> + }
> +
> + //
> + // Save mediaId
> + //
> + Dev->MediaId = BlkIo->Media->MediaId;
> +
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiBlockIoProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + //
> + // Acquire Ascii printable name of child, if not found, then ignore device
> + //
> + Result = OpalDriverGetDriverDeviceName (Dev);
> + if (!Result) {
> + goto Done;
> + }
> +
> + Status = OpalDiskInitialize (Dev);
> + if (EFI_ERROR (Status)) {
> + goto Done;
> + }
> +
> + AddDeviceToTail(Dev);
> +
> + //
> + // Check if device is locked and prompt for password.
> + //
> + OpalDriverRequestPassword (Dev, L"Unlock:");
> +
> + //
> + // Process OPAL request from last boot.
> + //
> + ProcessOpalRequest (Dev);
> +
> + return EFI_SUCCESS;
> +
> +Done:
> + //
> + // free device, close protocols and exit
> + //
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + FreePool(Dev);
> +
> + return EFI_DEVICE_ERROR;
> +}
> +
> +/**
> + Stop this driver on Controller.
> +
> + @param This Protocol instance pointer.
> + @param Controller Handle of device to stop driver on
> + @param NumberOfChildren Number of Handles in ChildHandleBuffer. If
> number of
> + children is zero stop the entire bus driver.
> + @param ChildHandleBuffer List of Child Handles to Stop.
> +
> + @retval EFI_SUCCESS This driver is removed Controller.
> + @retval other This driver could not be removed from this
> device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingStop(
> + EFI_DRIVER_BINDING_PROTOCOL* This,
> + EFI_HANDLE Controller,
> + UINTN NumberOfChildren,
> + EFI_HANDLE* ChildHandleBuffer
> + )
> +{
> + OPAL_DRIVER_DEVICE* Itr;
> +
> + Itr = mOpalDriver.DeviceList;
> +
> + //
> + // does Controller match any of the devices we are managing for Opal
> + //
> + while (Itr != NULL) {
> + if (Itr->Handle == Controller) {
> + OpalDriverStopDevice (Itr);
> + return EFI_SUCCESS;
> + }
> +
> + Itr = Itr->Next;
> + }
> +
> + return EFI_NOT_FOUND;
> +}
> +
> +
> +/**
> + Unloads UEFI Driver. Very useful for debugging and testing.
> +
> + @param ImageHandle Image Handle this driver.
> +
> + @retval EFI_SUCCESS This function always complete
> successfully.
> + @retval EFI_INVALID_PARAMETER The input ImageHandle is not valid.
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverUnload (
> + IN EFI_HANDLE ImageHandle
> + )
> +{
> + EFI_STATUS Status;
> + OPAL_DRIVER_DEVICE *Itr;
> +
> + Status = EFI_SUCCESS;
> +
> + if (ImageHandle != gImageHandle) {
> + return (EFI_INVALID_PARAMETER);
> + }
> +
> + //
> + // Uninstall any interface added to each device by us
> + //
> + while (mOpalDriver.DeviceList) {
> + Itr = mOpalDriver.DeviceList;
> + //
> + // Remove OPAL_DRIVER_DEVICE from the list
> + // it updates the controllerList pointer
> + //
> + OpalDriverStopDevice(Itr);
> + }
> +
> + //
> + // Uninstall the HII capability
> + //
> + Status = HiiUninstall();
> +
> + return Status;
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
> new file mode 100644
> index 000000000000..a66b5a5345ff
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
> @@ -0,0 +1,613 @@
> +/** @file
> + Values defined and used by the Opal UEFI Driver.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef _OPAL_DRIVER_H_
> +#define _OPAL_DRIVER_H_
> +
> +#include <PiDxe.h>
> +
> +#include <IndustryStandard/Pci.h>
> +
> +#include <Protocol/PciIo.h>
> +#include <Protocol/SmmCommunication.h>
> +#include <Protocol/BlockIo.h>
> +#include <Protocol/LoadedImage.h>
> +#include <Protocol/DevicePath.h>
> +#include <Protocol/DevicePathToText.h>
> +#include <Protocol/StorageSecurityCommand.h>
> +
> +#include <Guid/EventGroup.h>
> +
> +#include <Library/UefiLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/UefiRuntimeServicesTableLib.h>
> +#include <Library/DxeServicesTableLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/MemoryAllocationLib.h>
> +#include <Library/BaseLib.h>
> +#include <Library/PrintLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/DevicePathLib.h>
> +#include <Library/HiiLib.h>
> +#include <Library/UefiHiiServicesLib.h>
> +#include <Library/PciLib.h>
> +#include <Library/S3BootScriptLib.h>
> +#include <Library/LockBoxLib.h>
> +#include <Library/TcgStorageOpalLib.h>
> +#include <Library/Tcg2PhysicalPresenceLib.h>
> +
> +#include "OpalPasswordCommon.h"
> +#include "OpalHiiFormValues.h"
> +
> +#define EFI_DRIVER_NAME_UNICODE L"1.0 UEFI Opal Driver"
> +
> +// UEFI 2.1
> +#define LANGUAGE_RFC_3066_ENGLISH ((CHAR8*)"en")
> +
> +// UEFI/EFI < 2.1
> +#define LANGUAGE_ISO_639_2_ENGLISH ((CHAR8*)"eng")
> +
> +#define CONCAT_(x, y) x ## y
> +#define CONCAT(x, y) CONCAT_(x, y)
> +
> +#define UNICODE_STR(x) CONCAT( L, x )
> +
> +extern EFI_DRIVER_BINDING_PROTOCOL gOpalDriverBinding;
> +extern EFI_COMPONENT_NAME_PROTOCOL gOpalComponentName;
> +extern EFI_COMPONENT_NAME2_PROTOCOL gOpalComponentName2;
> +
> +#define OPAL_MSID_LENGHT 128
> +
> +#define MAX_PASSWORD_SIZE 32
> +#define MAX_PASSWORD_TRY_COUNT 5
> +
> +// PSID Length
> +#define PSID_CHARACTER_LENGTH 0x20
> +#define MAX_PSID_TRY_COUNT 5
> +
> +#pragma pack(1)
> +
> +//
> +// Structure that is used to represent the available actions for an OpalDisk.
> +// The data can then be utilized to expose/hide certain actions available to an
> end user
> +// by the consumer of this library.
> +//
> +typedef struct {
> + //
> + // Indicates if the disk can support PSID Revert action. should verify disk
> supports PSID authority
> + //
> + UINT16 PsidRevert : 1;
> +
> + //
> + // Indicates if the disk can support Revert action
> + //
> + UINT16 Revert : 1;
> +
> + //
> + // Indicates if the user must keep data for revert action. It is true if no
> media encryption is supported.
> + //
> + UINT16 RevertKeepDataForced : 1;
> +
> + //
> + // Indicates if the disk can support set Admin password
> + //
> + UINT16 AdminPass : 1;
> +
> + //
> + // Indicates if the disk can support set User password. This action
> requires that a user
> + // password is first enabled.
> + //
> + UINT16 UserPass : 1;
> +
> + //
> + // Indicates if unlock action is available. Requires disk to be currently
> locked.
> + //
> + UINT16 Unlock : 1;
> +
> + //
> + // Indicates if Secure Erase action is available. Action requires admin
> credentials and media encryption support.
> + //
> + UINT16 SecureErase : 1;
> +
> + //
> + // Indicates if Disable User action is available. Action requires admin
> credentials.
> + //
> + UINT16 DisableUser : 1;
> +} OPAL_DISK_ACTIONS;
> +
> +//
> +// Structure that is used to represent an OPAL_DISK.
> +//
> +typedef struct {
> + UINT32 MsidLength;
> // Byte length of MSID Pin for device
> + UINT8
> Msid[OPAL_MSID_LENGHT]; // MSID Pin for device
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *Sscp;
> + UINT32 MediaId;
> // MediaId is used by Ssc Protocol.
> + EFI_DEVICE_PATH_PROTOCOL *OpalDevicePath;
> + UINT16 OpalBaseComId;
> // Opal SSC 1 base com id.
> + OPAL_OWNER_SHIP Owner;
> + OPAL_DISK_SUPPORT_ATTRIBUTE
> SupportedAttributes;
> + TCG_LOCKING_FEATURE_DESCRIPTOR LockingFeature;
> // Locking Feature Descriptor retrieved from performing a Level 0 Discovery
> + UINT8 PasswordLength;
> + UINT8
> Password[MAX_PASSWORD_SIZE];
> +} OPAL_DISK;
> +
> +//
> +// Device with block IO protocol
> +//
> +typedef struct _OPAL_DRIVER_DEVICE OPAL_DRIVER_DEVICE;
> +
> +struct _OPAL_DRIVER_DEVICE {
> + OPAL_DRIVER_DEVICE *Next;
> ///< Linked list pointer
> + EFI_HANDLE Handle;
> ///< Device handle
> + OPAL_DISK OpalDisk;
> ///< User context
> + CHAR16 *Name16;
> ///< Allocated/freed by UEFI Filter Driver at device creation/removal
> + CHAR8 *NameZ;
> ///< Allocated/freed by UEFI Filter Driver at device creation/removal
> + UINT32 MediaId;
> ///< Required parameter for EFI_STORAGE_SECURITY_COMMAND_PROTOCOL,
> from BLOCK_IO_MEDIA
> +
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *Sscp;
> /// Device protocols consumed
> + EFI_DEVICE_PATH_PROTOCOL *OpalDevicePath;
> +};
> +
> +//
> +// Opal Driver UEFI Driver Model
> +//
> +typedef struct {
> + EFI_HANDLE Handle; ///< Driver image handle
> + OPAL_DRIVER_DEVICE *DeviceList; ///< Linked list of controllers
> owned by this Driver
> +} OPAL_DRIVER;
> +
> +#pragma pack()
> +
> +//
> +// Retrieves a OPAL_DRIVER_DEVICE based on the pointer to its StorageSecurity
> protocol.
> +//
> +#define DRIVER_DEVICE_FROM_OPALDISK(OpalDiskPointer)
> (OPAL_DRIVER_DEVICE*)(BASE_CR(OpalDiskPointer, OPAL_DRIVER_DEVICE,
> OpalDisk))
> +
> +/**
> + Get devcie list info.
> +
> + @retval return the device list pointer.
> +**/
> +OPAL_DRIVER_DEVICE*
> +OpalDriverGetDeviceList(
> + VOID
> + );
> +
> +/**
> + Get devcie name through the component name protocol.
> +
> + @param[in] Dev The device which need to get
> name.
> +
> + @retval TRUE Find the name for this device.
> + @retval FALSE Not found the name for this device.
> +**/
> +BOOLEAN
> +OpalDriverGetDriverDeviceName(
> + OPAL_DRIVER_DEVICE *Dev
> + );
> +
> +/**
> + Get current device count.
> +
> + @retval return the current created device count.
> +
> +**/
> +UINT8
> +GetDeviceCount (
> + VOID
> + );
> +
> +/**
> + Update password for the Opal disk.
> +
> + @param[in, out] OpalDisk The disk to update password.
> + @param[in] Password The input password.
> + @param[in] PasswordLength The input password length.
> +
> +**/
> +VOID
> +OpalSupportUpdatePassword (
> + IN OUT OPAL_DISK *OpalDisk,
> + IN VOID *Password,
> + IN UINT32 PasswordLength
> + );
> +
> +/**
> +
> + The function performs determines the available actions for the OPAL_DISK
> provided.
> +
> + @param[in] SupportedAttributes The support attribute for the device.
> + @param[in] LockingFeature The locking status for the device.
> + @param[in] OwnerShip The ownership for the device.
> + @param[out] AvalDiskActions Pointer to fill-out with appropriate
> disk actions.
> +
> +**/
> +TCG_RESULT
> +EFIAPI
> +OpalSupportGetAvailableActions(
> + IN OPAL_DISK_SUPPORT_ATTRIBUTE *SupportedAttributes,
> + IN TCG_LOCKING_FEATURE_DESCRIPTOR *LockingFeature,
> + IN UINT16 OwnerShip,
> + OUT OPAL_DISK_ACTIONS *AvalDiskActions
> + );
> +
> +/**
> + Enable Opal Feature for the input device.
> +
> + @param[in] Session The opal session for the opal device.
> + @param[in] Msid Msid
> + @param[in] MsidLength Msid Length
> + @param[in] Password Admin password
> + @param[in] PassLength Length of password in bytes
> +
> +**/
> +TCG_RESULT
> +EFIAPI
> +OpalSupportEnableOpalFeature (
> + IN OPAL_SESSION *Session,
> + IN VOID *Msid,
> + IN UINT32 MsidLength,
> + IN VOID *Password,
> + IN UINT32 PassLength
> + );
> +
> +/**
> + Unloads UEFI Driver. Very useful for debugging and testing.
> +
> + @param ImageHandle Image handle this driver.
> +
> + @retval EFI_SUCCESS This function always complete
> successfully.
> + @retval EFI_INVALID_PARAMETER The input ImageHandle is not valid.
> +**/
> +EFI_STATUS
> +EFIAPI
> +EfiDriverUnload(
> + EFI_HANDLE ImageHandle
> + );
> +
> +
> +/**
> + Test to see if this driver supports Controller.
> +
> + @param This Protocol instance pointer.
> + @param ControllerHandle Handle of device to test
> + @param RemainingDevicePath Optional parameter use to pick a specific
> child
> + device to start.
> +
> + @retval EFI_SUCCESS This driver supports this device.
> + @retval EFI_ALREADY_STARTED This driver is already running on this device.
> + @retval other This driver does not support this device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingSupported(
> + EFI_DRIVER_BINDING_PROTOCOL* This,
> + EFI_HANDLE Controller,
> + EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
> + );
> +
> +/**
> + Enables Opal Management on a supported device if available.
> +
> + The start function is designed to be called after the Opal UEFI Driver has
> confirmed the
> + "controller", which is a child handle, contains the
> EF_STORAGE_SECURITY_COMMAND protocols.
> + This function will complete the other necessary checks, such as verifying the
> device supports
> + the correct version of Opal. Upon verification, it will add the device to the
> + Opal HII list in order to expose Opal managmeent options.
> +
> + @param[in] This A pointer to the
> EFI_DRIVER_BINDING_PROTOCOL instance.
> + @param[in] ControllerHandle The handle of the controller to start.
> This handle
> + must support a protocol interface
> that supplies
> + an I/O abstraction to the driver.
> + @param[in] RemainingDevicePath A pointer to the remaining portion of
> a device path. This
> + parameter is ignored by device
> drivers, and is optional for bus
> + drivers. For a bus driver, if this
> parameter is NULL, then handles
> + for all the children of Controller are
> created by this driver.
> + If this parameter is not NULL and the
> first Device Path Node is
> + not the End of Device Path Node,
> then only the handle for the
> + child device specified by the first
> Device Path Node of
> + RemainingDevicePath is created by
> this driver.
> + If the first Device Path Node of
> RemainingDevicePath is
> + the End of Device Path Node, no
> child handle is created by this
> + driver.
> +
> + @retval EFI_SUCCESS Opal management was enabled.
> + @retval EFI_DEVICE_ERROR The device could not be started due
> to a device error.Currently not implemented.
> + @retval EFI_OUT_OF_RESOURCES The request could not be
> completed due to a lack of resources.
> + @retval Others The driver failed to start the device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingStart(
> + EFI_DRIVER_BINDING_PROTOCOL* This,
> + EFI_HANDLE Controller,
> + EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
> + );
> +
> +/**
> + Stop this driver on Controller.
> +
> + @param This Protocol instance pointer.
> + @param Controller Handle of device to stop driver on
> + @param NumberOfChildren Number of Handles in ChildHandleBuffer. If
> number of
> + children is zero stop the entire bus driver.
> + @param ChildHandleBuffer List of Child Handles to Stop.
> +
> + @retval EFI_SUCCESS This driver is removed Controller.
> + @retval other This driver could not be removed from this
> device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingStop(
> + EFI_DRIVER_BINDING_PROTOCOL* This,
> + EFI_HANDLE Controller,
> + UINTN NumberOfChildren,
> + EFI_HANDLE* ChildHandleBuffer
> + );
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the driver.
> +
> + This function retrieves the user readable name of a driver in the form of a
> + Unicode string. If the driver specified by This has a user readable name in
> + the language specified by Language, then a pointer to the driver name is
> + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
> + by This does not support the language specified by Language,
> + then EFI_UNSUPPORTED is returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> + in RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param DriverName[out] A pointer to the Unicode string to
> return.
> + This Unicode string is the name of the
> + driver specified by This in the language
> + specified by Language.
> +
> + @retval EFI_SUCCESS The Unicode string for the Driver specified
> by
> + This and the language specified by
> Language was
> + returned in DriverName.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER DriverName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentNameGetDriverName(
> + EFI_COMPONENT_NAME_PROTOCOL* This,
> + CHAR8* Language,
> + CHAR16** DriverName
> + );
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentNameGetControllerName(
> + EFI_COMPONENT_NAME_PROTOCOL* This,
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + );
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the driver.
> +
> + This function retrieves the user readable name of a driver in the form of a
> + Unicode string. If the driver specified by This has a user readable name in
> + the language specified by Language, then a pointer to the driver name is
> + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
> + by This does not support the language specified by Language,
> + then EFI_UNSUPPORTED is returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> + in RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param DriverName[out] A pointer to the Unicode string to
> return.
> + This Unicode string is the name of the
> + driver specified by This in the language
> + specified by Language.
> +
> + @retval EFI_SUCCESS The Unicode string for the Driver specified
> by
> + This and the language specified by
> Language was
> + returned in DriverName.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER DriverName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentName2GetDriverName(
> + EFI_COMPONENT_NAME2_PROTOCOL* This,
> + CHAR8* Language,
> + CHAR16** DriverName
> + );
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentName2GetControllerName(
> + EFI_COMPONENT_NAME2_PROTOCOL* This,
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + );
> +
> +#endif //_OPAL_DRIVER_H_
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
> new file mode 100644
> index 000000000000..e4972227b669
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
> @@ -0,0 +1,1178 @@
> +/** @file
> + Implementation of the HII for the Opal UEFI Driver.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalHii.h"
> +
> +//
> +// This is the generated IFR binary Data for each formset defined in VFR.
> +// This Data array is ready to be used as input of HiiAddPackages() to
> +// create a packagelist (which contains Form packages, String packages, etc).
> +//
> +extern UINT8 OpalPasswordFormBin[];
> +
> +//
> +// This is the generated String package Data for all .UNI files.
> +// This Data array is ready to be used as input of HiiAddPackages() to
> +// create a packagelist (which contains Form packages, String packages, etc).
> +//
> +extern UINT8 OpalPasswordDxeStrings[];
> +
> +CHAR16 OpalPasswordStorageName[] = L"OpalHiiConfig";
> +
> +EFI_HII_CONFIG_ACCESS_PROTOCOL gHiiConfigAccessProtocol;
> +
> +//
> +// Handle to the list of HII packages (forms and strings) for this driver
> +//
> +EFI_HII_HANDLE gHiiPackageListHandle = NULL;
> +
> +//
> +// Package List GUID containing all form and string packages
> +//
> +const EFI_GUID gHiiPackageListGuid = PACKAGE_LIST_GUID;
> +const EFI_GUID gHiiSetupVariableGuid = SETUP_VARIABLE_GUID;
> +
> +//
> +// Structure that contains state of the HII
> +// This structure is updated by Hii.cpp and its contents
> +// is rendered in the HII.
> +//
> +OPAL_HII_CONFIGURATION gHiiConfiguration;
> +
> +//
> +// The device path containing the VENDOR_DEVICE_PATH and
> EFI_DEVICE_PATH_PROTOCOL
> +//
> +HII_VENDOR_DEVICE_PATH gHiiVendorDevicePath = {
> + {
> + {
> + HARDWARE_DEVICE_PATH,
> + HW_VENDOR_DP,
> + {
> + (UINT8)(sizeof(VENDOR_DEVICE_PATH)),
> + (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8)
> + }
> + },
> + OPAL_PASSWORD_CONFIG_GUID
> + },
> + {
> + END_DEVICE_PATH_TYPE,
> + END_ENTIRE_DEVICE_PATH_SUBTYPE,
> + {
> + (UINT8)(END_DEVICE_PATH_LENGTH),
> + (UINT8)((END_DEVICE_PATH_LENGTH) >> 8)
> + }
> + }
> +};
> +
> +/**
> + Get saved OPAL request.
> +
> + @param[in] OpalDisk The disk needs to get the saved OPAL request.
> + @param[out] OpalRequest OPAL request got.
> +
> +**/
> +VOID
> +GetSavedOpalRequest (
> + IN OPAL_DISK *OpalDisk,
> + OUT OPAL_REQUEST *OpalRequest
> + )
> +{
> + EFI_STATUS Status;
> + OPAL_REQUEST_VARIABLE *TempVariable;
> + OPAL_REQUEST_VARIABLE *Variable;
> + UINTN VariableSize;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePathInVariable;
> + UINTN DevicePathSizeInVariable;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePath;
> + UINTN DevicePathSize;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + Variable = NULL;
> + VariableSize = 0;
> +
> + Status = GetVariable2 (
> + OPAL_REQUEST_VARIABLE_NAME,
> + &gHiiSetupVariableGuid,
> + (VOID **) &Variable,
> + &VariableSize
> + );
> + if (EFI_ERROR (Status) || (Variable == NULL)) {
> + return;
> + }
> +
> + TempVariable = Variable;
> + while ((VariableSize > sizeof (OPAL_REQUEST_VARIABLE)) &&
> + (VariableSize >= TempVariable->Length) &&
> + (TempVariable->Length > sizeof (OPAL_REQUEST_VARIABLE))) {
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + DevicePathSizeInVariable = GetDevicePathSize (DevicePathInVariable);
> + DevicePath = OpalDisk->OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + if ((DevicePathSize == DevicePathSizeInVariable) &&
> + (CompareMem (DevicePath, DevicePathInVariable, DevicePathSize)
> == 0)) {
> + //
> + // Found the node for the OPAL device.
> + // Get the OPAL request.
> + //
> + CopyMem (OpalRequest, &TempVariable->OpalRequest, sizeof
> (OPAL_REQUEST));
> + DEBUG ((
> + DEBUG_INFO,
> + "OpalRequest got: 0x%x\n",
> + *OpalRequest
> + ));
> + break;
> + }
> + VariableSize -= TempVariable->Length;
> + TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) TempVariable +
> TempVariable->Length);
> + }
> +
> + FreePool (Variable);
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Save OPAL request.
> +
> + @param[in] OpalDisk The disk has OPAL request to save.
> + @param[in] OpalRequest OPAL request to save.
> +
> +**/
> +VOID
> +SaveOpalRequest (
> + IN OPAL_DISK *OpalDisk,
> + IN OPAL_REQUEST OpalRequest
> + )
> +{
> + EFI_STATUS Status;
> + OPAL_REQUEST_VARIABLE *TempVariable;
> + UINTN TempVariableSize;
> + OPAL_REQUEST_VARIABLE *Variable;
> + UINTN VariableSize;
> + OPAL_REQUEST_VARIABLE *NewVariable;
> + UINTN NewVariableSize;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePathInVariable;
> + UINTN DevicePathSizeInVariable;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePath;
> + UINTN DevicePathSize;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "OpalRequest to save: 0x%x\n",
> + OpalRequest
> + ));
> +
> + Variable = NULL;
> + VariableSize = 0;
> + NewVariable = NULL;
> + NewVariableSize = 0;
> +
> + Status = GetVariable2 (
> + OPAL_REQUEST_VARIABLE_NAME,
> + &gHiiSetupVariableGuid,
> + (VOID **) &Variable,
> + &VariableSize
> + );
> + if (!EFI_ERROR (Status) && (Variable != NULL)) {
> + TempVariable = Variable;
> + TempVariableSize = VariableSize;
> + while ((TempVariableSize > sizeof (OPAL_REQUEST_VARIABLE)) &&
> + (TempVariableSize >= TempVariable->Length) &&
> + (TempVariable->Length > sizeof (OPAL_REQUEST_VARIABLE))) {
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + DevicePathSizeInVariable = GetDevicePathSize (DevicePathInVariable);
> + DevicePath = OpalDisk->OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + if ((DevicePathSize == DevicePathSizeInVariable) &&
> + (CompareMem (DevicePath, DevicePathInVariable, DevicePathSize)
> == 0)) {
> + //
> + // Found the node for the OPAL device.
> + // Update the OPAL request.
> + //
> + CopyMem (&TempVariable->OpalRequest, &OpalRequest, sizeof
> (OPAL_REQUEST));
> + NewVariable = Variable;
> + NewVariableSize = VariableSize;
> + break;
> + }
> + TempVariableSize -= TempVariable->Length;
> + TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) TempVariable +
> TempVariable->Length);
> + }
> + if (NewVariable == NULL) {
> + //
> + // The node for the OPAL device is not found.
> + // Create node for the OPAL device.
> + //
> + DevicePath = OpalDisk->OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + NewVariableSize = VariableSize + sizeof (OPAL_REQUEST_VARIABLE) +
> DevicePathSize;
> + NewVariable = AllocatePool (NewVariableSize);
> + ASSERT (NewVariable != NULL);
> + CopyMem (NewVariable, Variable, VariableSize);
> + TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) NewVariable +
> VariableSize);
> + TempVariable->Length = (UINT32) (sizeof (OPAL_REQUEST_VARIABLE) +
> DevicePathSize);
> + CopyMem (&TempVariable->OpalRequest, &OpalRequest, sizeof
> (OPAL_REQUEST));
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + CopyMem (DevicePathInVariable, DevicePath, DevicePathSize);
> + }
> + } else {
> + DevicePath = OpalDisk->OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + NewVariableSize = sizeof (OPAL_REQUEST_VARIABLE) + DevicePathSize;
> + NewVariable = AllocatePool (NewVariableSize);
> + ASSERT (NewVariable != NULL);
> + NewVariable->Length = (UINT32) (sizeof (OPAL_REQUEST_VARIABLE) +
> DevicePathSize);
> + CopyMem (&NewVariable->OpalRequest, &OpalRequest, sizeof
> (OPAL_REQUEST));
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> NewVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + CopyMem (DevicePathInVariable, DevicePath, DevicePathSize);
> + }
> + Status = gRT->SetVariable (
> + OPAL_REQUEST_VARIABLE_NAME,
> + (EFI_GUID *) &gHiiSetupVariableGuid,
> + EFI_VARIABLE_NON_VOLATILE |
> EFI_VARIABLE_BOOTSERVICE_ACCESS,
> + NewVariableSize,
> + NewVariable
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_INFO, "OpalRequest variable set failed (%r)\n", Status));
> + }
> + if (NewVariable != Variable) {
> + FreePool (NewVariable);
> + }
> + if (Variable != NULL) {
> + FreePool (Variable);
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Sets the current system state of global config variables.
> +
> +**/
> +VOID
> +HiiSetCurrentConfiguration(
> + VOID
> + )
> +{
> + UINT32 PpStorageFlag;
> + EFI_STRING NewString;
> +
> + gHiiConfiguration.NumDisks = GetDeviceCount();
> +
> + //
> + // Update the BlockSID status string.
> + //
> + PpStorageFlag = Tcg2PhysicalPresenceLibGetManagementFlags ();
> +
> + if ((PpStorageFlag &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_ENABLED), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + } else {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISABLED), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + }
> + HiiSetString(gHiiPackageListHandle,
> STRING_TOKEN(STR_BLOCKSID_STATUS1), NewString, NULL);
> + FreePool (NewString);
> +
> + if ((PpStorageFlag &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_PP_REQUIRED_FOR_ENABLE_BL
> OCK_SID) != 0) {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_TRUE), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + } else {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_FALSE), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + }
> + HiiSetString(gHiiPackageListHandle,
> STRING_TOKEN(STR_BLOCKSID_STATUS2), NewString, NULL);
> + FreePool (NewString);
> +
> + if ((PpStorageFlag &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_PP_REQUIRED_FOR_DISABLE_BL
> OCK_SID) != 0) {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_TRUE), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + } else {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_FALSE), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + }
> + HiiSetString(gHiiPackageListHandle,
> STRING_TOKEN(STR_BLOCKSID_STATUS3), NewString, NULL);
> + FreePool (NewString);
> +}
> +
> +/**
> + Install the HII related resources.
> +
> + @retval EFI_SUCCESS Install all the resources success.
> + @retval other Error occur when install the resources.
> +**/
> +EFI_STATUS
> +HiiInstall(
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> + EFI_HANDLE DriverHandle;
> +
> + //
> + // Clear the global configuration.
> + //
> + ZeroMem(&gHiiConfiguration, sizeof(gHiiConfiguration));
> +
> + //
> + // Obtain the driver handle that the BIOS assigned us
> + //
> + DriverHandle = HiiGetDriverImageHandleCB();
> +
> + //
> + // Populate the config access protocol with the three functions we are
> publishing
> + //
> + gHiiConfigAccessProtocol.ExtractConfig = ExtractConfig;
> + gHiiConfigAccessProtocol.RouteConfig = RouteConfig;
> + gHiiConfigAccessProtocol.Callback = DriverCallback;
> +
> + //
> + // Associate the required protocols with our driver handle
> + //
> + Status = gBS->InstallMultipleProtocolInterfaces(
> + &DriverHandle,
> + &gEfiHiiConfigAccessProtocolGuid,
> + &gHiiConfigAccessProtocol, // HII callback
> + &gEfiDevicePathProtocolGuid,
> + &gHiiVendorDevicePath, // required for HII callback
> allow all disks to be shown in same hii
> + NULL
> + );
> +
> + if (EFI_ERROR(Status)) {
> + return Status;
> + }
> +
> + return OpalHiiAddPackages();
> +}
> +
> +/**
> + Install the HII form and string packages.
> +
> + @retval EFI_SUCCESS Install all the resources success.
> + @retval EFI_OUT_OF_RESOURCES Out of resource error.
> +**/
> +EFI_STATUS
> +OpalHiiAddPackages(
> + VOID
> + )
> +{
> + EFI_HANDLE DriverHandle;
> + CHAR16 *NewString;
> +
> + DriverHandle = HiiGetDriverImageHandleCB();
> +
> + //
> + // Publish the HII form and HII string packages
> + //
> + gHiiPackageListHandle = HiiAddPackages(
> + &gHiiPackageListGuid,
> + DriverHandle,
> + OpalPasswordDxeStrings,
> + OpalPasswordFormBin,
> + (VOID*)NULL
> + );
> +
> + //
> + // Make sure the packages installed successfully
> + //
> + if (gHiiPackageListHandle == NULL) {
> + DEBUG ((DEBUG_INFO, "OpalHiiAddPackages failed\n"));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + //
> + // Update Version String in main window
> + //
> + NewString = HiiGetDriverNameCB ();
> + if (HiiSetString(gHiiPackageListHandle,
> STRING_TOKEN(STR_MAIN_OPAL_VERSION), NewString, NULL) == 0) {
> + DEBUG ((DEBUG_INFO, "OpalHiiAddPackages: HiiSetString( ) failed\n"));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Uninstall the HII capability.
> +
> + @retval EFI_SUCCESS Uninstall all the resources success.
> + @retval others Other errors occur when unistall the hii
> resource.
> +**/
> +EFI_STATUS
> +HiiUninstall(
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> +
> + //
> + // Remove the packages we've provided to the BIOS
> + //
> + HiiRemovePackages(gHiiPackageListHandle);
> +
> + //
> + // Remove the protocols from our driver handle
> + //
> + Status = gBS->UninstallMultipleProtocolInterfaces(
> + HiiGetDriverImageHandleCB(),
> + &gEfiHiiConfigAccessProtocolGuid,
> + &gHiiConfigAccessProtocol, // HII
> callback
> + &gEfiDevicePathProtocolGuid,
> + &gHiiVendorDevicePath, //
> required for HII callback
> + NULL
> + );
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_INFO, "Cannot uninstall Hii Protocols: %r\n", Status));
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Updates the main menu form.
> +
> + @retval EFI_SUCCESS update the main form success.
> +**/
> +EFI_STATUS
> +HiiPopulateMainMenuForm (
> + VOID
> + )
> +{
> + UINT8 Index;
> + CHAR8 *DiskName;
> + EFI_STRING_ID DiskNameId;
> + OPAL_DISK *OpalDisk;
> +
> + HiiSetCurrentConfiguration();
> +
> + gHiiConfiguration.SupportedDisks = 0;
> +
> + for (Index = 0; Index < gHiiConfiguration.NumDisks; Index++) {
> + OpalDisk = HiiGetOpalDiskCB (Index);
> + if ((OpalDisk != NULL) && OpalFeatureSupported
> (&OpalDisk->SupportedAttributes)) {
> + gHiiConfiguration.SupportedDisks |= (1 << Index);
> + DiskNameId = GetDiskNameStringId (Index);
> + DiskName = HiiDiskGetNameCB (Index);
> + if ((DiskName == NULL) || (DiskNameId == 0)) {
> + return EFI_UNSUPPORTED;
> + }
> + HiiSetFormString(DiskNameId, DiskName);
> + }
> + }
> +
> + OpalHiiSetBrowserData ();
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Get disk name string id.
> +
> + @param DiskIndex The input disk index info.
> +
> + @retval The disk name string id.
> +
> +**/
> +EFI_STRING_ID
> +GetDiskNameStringId(
> + UINT8 DiskIndex
> + )
> +{
> + switch (DiskIndex) {
> + case 0: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_0);
> + case 1: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_1);
> + case 2: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_2);
> + case 3: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_3);
> + case 4: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_4);
> + case 5: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_5);
> + }
> + return 0;
> +}
> +
> +/**
> + This function processes the results of changes in configuration.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Action Specifies the type of action taken by the
> browser.
> + @param QuestionId A unique value which is sent to the
> original
> + exporting driver so that it can identify
> the type
> + of data to expect.
> + @param Type The type of value for the question.
> + @param Value A pointer to the data being sent to the
> original
> + exporting driver.
> + @param ActionRequest On return, points to the action
> requested by the
> + callback function.
> +
> + @retval EFI_SUCCESS The callback successfully handled the
> action.
> + @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold
> the
> + variable and its data.
> + @retval EFI_DEVICE_ERROR The variable could not be saved.
> + @retval EFI_UNSUPPORTED The specified Action is not supported
> by the
> + callback.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +DriverCallback(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + EFI_BROWSER_ACTION Action,
> + EFI_QUESTION_ID QuestionId,
> + UINT8 Type,
> + EFI_IFR_TYPE_VALUE *Value,
> + EFI_BROWSER_ACTION_REQUEST *ActionRequest
> + )
> +{
> + HII_KEY HiiKey;
> + UINT8 HiiKeyId;
> + UINT32 PpRequest;
> + OPAL_DISK *OpalDisk;
> +
> + if (ActionRequest != NULL) {
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_NONE;
> + } else {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // If QuestionId is an auto-generated key (label, empty line, etc.), ignore it.
> + //
> + if ((QuestionId & HII_KEY_FLAG) == 0) {
> + return EFI_SUCCESS;
> + }
> +
> + HiiKey.Raw = QuestionId;
> + HiiKeyId = (UINT8) HiiKey.KeyBits.Id;
> +
> + if (Action == EFI_BROWSER_ACTION_FORM_OPEN) {
> + switch (HiiKeyId) {
> + case HII_KEY_ID_VAR_SUPPORTED_DISKS:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_VAR_SUPPORTED_DISKS\n"));
> + return HiiPopulateMainMenuForm ();
> +
> + case HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS:
> + DEBUG ((DEBUG_INFO,
> "HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS\n"));
> + return HiiPopulateDiskInfoForm();
> + }
> + } else if (Action == EFI_BROWSER_ACTION_CHANGING) {
> + switch (HiiKeyId) {
> + case HII_KEY_ID_GOTO_DISK_INFO:
> + return HiiSelectDisk((UINT8)HiiKey.KeyBits.Index);
> + }
> + } else if (Action == EFI_BROWSER_ACTION_CHANGED) {
> + switch (HiiKeyId) {
> + case HII_KEY_ID_BLOCKSID:
> + switch (Value->u8) {
> + case 0:
> + PpRequest = TCG2_PHYSICAL_PRESENCE_NO_ACTION;
> + break;
> +
> + case 1:
> + PpRequest = TCG2_PHYSICAL_PRESENCE_ENABLE_BLOCK_SID;
> + break;
> +
> + case 2:
> + PpRequest = TCG2_PHYSICAL_PRESENCE_DISABLE_BLOCK_SID;
> + break;
> +
> + case 3:
> + PpRequest =
> TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_ENABLE_BLOCK_SID_FU
> NC_TRUE;
> + break;
> +
> + case 4:
> + PpRequest =
> TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_ENABLE_BLOCK_SID_FU
> NC_FALSE;
> + break;
> +
> + case 5:
> + PpRequest =
> TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_DISABLE_BLOCK_SID_FU
> NC_TRUE;
> + break;
> +
> + case 6:
> + PpRequest =
> TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_DISABLE_BLOCK_SID_FU
> NC_FALSE;
> + break;
> +
> + default:
> + PpRequest = TCG2_PHYSICAL_PRESENCE_NO_ACTION;
> + DEBUG ((DEBUG_ERROR, "Invalid value input!\n"));
> + break;
> + }
> + HiiSetBlockSidAction(PpRequest);
> +
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_SET_ADMIN_PWD:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_SET_ADMIN_PWD\n"));
> + gHiiConfiguration.OpalRequest.SetAdminPwd = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_SET_USER_PWD:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_SET_USER_PWD\n"));
> + gHiiConfiguration.OpalRequest.SetUserPwd = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_SECURE_ERASE:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_SECURE_ERASE\n"));
> + gHiiConfiguration.OpalRequest.SecureErase = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_REVERT:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_REVERT\n"));
> + gHiiConfiguration.OpalRequest.Revert = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> + case HII_KEY_ID_KEEP_USER_DATA:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_KEEP_USER_DATA\n"));
> + gHiiConfiguration.OpalRequest.KeepUserData = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_PSID_REVERT:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_PSID_REVERT\n"));
> + gHiiConfiguration.OpalRequest.PsidRevert = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_DISABLE_USER:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_DISABLE_USER\n"));
> + gHiiConfiguration.OpalRequest.DisableUser = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_ENABLE_FEATURE:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_ENABLE_FEATURE\n"));
> + gHiiConfiguration.OpalRequest.EnableFeature = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + default:
> + break;
> + }
> + }
> +
> + return EFI_UNSUPPORTED;
> +}
> +
> +/**
> + Update the global Disk index info.
> +
> + @param Index The input disk index info.
> +
> + @retval EFI_SUCCESS Update the disk index info success.
> +
> +**/
> +EFI_STATUS
> +HiiSelectDisk(
> + UINT8 Index
> + )
> +{
> + OpalHiiGetBrowserData();
> + gHiiConfiguration.SelectedDiskIndex = Index;
> + OpalHiiSetBrowserData ();
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Draws the disk info form.
> +
> + @retval EFI_SUCCESS Draw the disk info success.
> +
> +**/
> +EFI_STATUS
> +HiiPopulateDiskInfoForm(
> + VOID
> + )
> +{
> + OPAL_DISK* OpalDisk;
> + OPAL_DISK_ACTIONS AvailActions;
> + TCG_RESULT Ret;
> + CHAR8 *DiskName;
> +
> + OpalHiiGetBrowserData();
> +
> + DiskName = HiiDiskGetNameCB (gHiiConfiguration.SelectedDiskIndex);
> + if (DiskName == NULL) {
> + return EFI_UNSUPPORTED;
> + }
> + HiiSetFormString(STRING_TOKEN(STR_DISK_INFO_SELECTED_DISK_NAME),
> DiskName);
> +
> + gHiiConfiguration.SelectedDiskAvailableActions = HII_ACTION_NONE;
> + ZeroMem (&gHiiConfiguration.OpalRequest, sizeof (OPAL_REQUEST));
> + gHiiConfiguration.KeepUserDataForced = FALSE;
> +
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> +
> + if (OpalDisk != NULL) {
> + OpalDiskUpdateStatus (OpalDisk);
> + Ret = OpalSupportGetAvailableActions(&OpalDisk->SupportedAttributes,
> &OpalDisk->LockingFeature, OpalDisk->Owner, &AvailActions);
> + if (Ret == TcgResultSuccess) {
> + //
> + // Update actions, always allow PSID Revert
> + //
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.PsidRevert == 1) ? HII_ACTION_PSID_REVERT :
> HII_ACTION_NONE;
> +
> + //
> + // Always allow unlock to handle device migration
> + //
> + gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.Unlock
> == 1) ? HII_ACTION_UNLOCK : HII_ACTION_NONE;
> +
> + if (!OpalFeatureEnabled (&OpalDisk->SupportedAttributes,
> &OpalDisk->LockingFeature)) {
> + if (OpalDisk->Owner == OpalOwnershipNobody) {
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> HII_ACTION_ENABLE_FEATURE;
> +
> + //
> + // Update strings
> + //
> + HiiSetFormString( STRING_TOKEN(STR_DISK_INFO_PSID_REVERT),
> "PSID Revert to factory default");
> + } else {
> + DEBUG ((DEBUG_INFO, "Feature disabled but ownership !=
> nobody\n"));
> + }
> + } else {
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.Revert == 1) ? HII_ACTION_REVERT : HII_ACTION_NONE;
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.AdminPass == 1) ? HII_ACTION_SET_ADMIN_PWD :
> HII_ACTION_NONE;
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.UserPass == 1) ? HII_ACTION_SET_USER_PWD :
> HII_ACTION_NONE;
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.SecureErase == 1) ? HII_ACTION_SECURE_ERASE :
> HII_ACTION_NONE;
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.DisableUser == 1) ? HII_ACTION_DISABLE_USER :
> HII_ACTION_NONE;
> +
> + HiiSetFormString (STRING_TOKEN(STR_DISK_INFO_PSID_REVERT),
> "PSID Revert to factory default and Disable");
> +
> + //
> + // Determine revert options for disk
> + // Default initialize keep user Data to be true
> + //
> + gHiiConfiguration.OpalRequest.KeepUserData = 1;
> + if (AvailActions.RevertKeepDataForced) {
> + gHiiConfiguration.KeepUserDataForced = TRUE;
> + }
> + }
> + }
> +
> + GetSavedOpalRequest (OpalDisk, &gHiiConfiguration.OpalRequest);
> + }
> +
> + //
> + // Pass the current configuration to the BIOS
> + //
> + OpalHiiSetBrowserData ();
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Send BlockSid request through TPM physical presence module.
> +
> + @param PpRequest TPM physical presence operation request.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiSetBlockSidAction (
> + IN UINT32 PpRequest
> + )
> +{
> + UINT32 ReturnCode;
> + EFI_STATUS Status;
> +
> + ReturnCode = Tcg2PhysicalPresenceLibSubmitRequestToPreOSFunction
> (PpRequest, 0);
> + if (ReturnCode == TCG_PP_SUBMIT_REQUEST_TO_PREOS_SUCCESS) {
> + Status = EFI_SUCCESS;
> + } else if (ReturnCode ==
> TCG_PP_SUBMIT_REQUEST_TO_PREOS_GENERAL_FAILURE) {
> + Status = EFI_OUT_OF_RESOURCES;
> + } else if (ReturnCode ==
> TCG_PP_SUBMIT_REQUEST_TO_PREOS_NOT_IMPLEMENTED) {
> + Status = EFI_UNSUPPORTED;
> + } else {
> + Status = EFI_DEVICE_ERROR;
> + }
> +
> + return Status;
> +}
> +
> +/**
> + This function processes the results of changes in configuration.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Configuration A null-terminated Unicode string in
> <ConfigResp>
> + format.
> + @param Progress A pointer to a string filled in with the
> offset of
> + the most recent '&' before the first
> failing
> + name/value pair (or the beginning of the
> string if
> + the failure is in the first name/value pair)
> or
> + the terminating NULL if all was
> successful.
> +
> + @retval EFI_SUCCESS The Results is processed successfully.
> + @retval EFI_INVALID_PARAMETER Configuration is NULL.
> + @retval EFI_NOT_FOUND Routing data doesn't match any
> storage in this
> + driver.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +RouteConfig(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + CONST EFI_STRING Configuration,
> + EFI_STRING *Progress
> + )
> +{
> + if (Configuration == NULL || Progress == NULL) {
> + return (EFI_INVALID_PARAMETER);
> + }
> +
> + *Progress = Configuration;
> + if (!HiiIsConfigHdrMatch (Configuration, &gHiiSetupVariableGuid,
> OpalPasswordStorageName)) {
> + return EFI_NOT_FOUND;
> + }
> +
> + *Progress = Configuration + StrLen (Configuration);
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + This function allows a caller to extract the current configuration for one
> + or more named elements from the target driver.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Request A null-terminated Unicode string in
> + <ConfigRequest> format.
> + @param Progress On return, points to a character in the
> Request
> + string. Points to the string's null
> terminator if
> + request was successful. Points to the
> most recent
> + '&' before the first failing name/value
> pair (or
> + the beginning of the string if the failure
> is in
> + the first name/value pair) if the request
> was not
> + successful.
> + @param Results A null-terminated Unicode string in
> + <ConfigAltResp> format which has all
> values filled
> + in for the names in the Request string.
> String to
> + be allocated by the called function.
> +
> + @retval EFI_SUCCESS The Results is filled with the requested
> values.
> + @retval EFI_OUT_OF_RESOURCES Not enough memory to store the
> results.
> + @retval EFI_INVALID_PARAMETER Request is illegal syntax, or unknown
> name.
> + @retval EFI_NOT_FOUND Routing data doesn't match any
> storage in this
> + driver.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ExtractConfig(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + CONST EFI_STRING Request,
> + EFI_STRING *Progress,
> + EFI_STRING *Results
> + )
> +{
> + EFI_STATUS Status;
> + EFI_STRING ConfigRequest;
> + EFI_STRING ConfigRequestHdr;
> + UINTN BufferSize;
> + UINTN Size;
> + BOOLEAN AllocatedRequest;
> + EFI_HANDLE DriverHandle;
> +
> + //
> + // Check for valid parameters
> + //
> + if (Progress == NULL || Results == NULL) {
> + return (EFI_INVALID_PARAMETER);
> + }
> +
> + *Progress = Request;
> + if ((Request != NULL) &&
> + !HiiIsConfigHdrMatch (Request, &gHiiSetupVariableGuid,
> OpalPasswordStorageName)) {
> + return EFI_NOT_FOUND;
> + }
> +
> + AllocatedRequest = FALSE;
> + BufferSize = sizeof (OPAL_HII_CONFIGURATION);
> + ConfigRequest = Request;
> + if ((Request == NULL) || (StrStr (Request, L"OFFSET") == NULL)) {
> + //
> + // Request has no request element, construct full request string.
> + // Allocate and fill a buffer large enough to hold the <ConfigHdr> template
> + // followed by "&OFFSET=0&WIDTH=WWWWWWWWWWWWWWWW"
> followed by a Null-terminator
> + //
> + DriverHandle = HiiGetDriverImageHandleCB();
> + ConfigRequestHdr = HiiConstructConfigHdr (&gHiiSetupVariableGuid,
> OpalPasswordStorageName, DriverHandle);
> + Size = (StrLen (ConfigRequestHdr) + 32 + 1) * sizeof (CHAR16);
> + ConfigRequest = AllocateZeroPool (Size);
> + if (ConfigRequest == NULL) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + AllocatedRequest = TRUE;
> + UnicodeSPrint (ConfigRequest, Size, L"%s&OFFSET=0&WIDTH=%016LX",
> ConfigRequestHdr, (UINT64)BufferSize);
> + FreePool (ConfigRequestHdr);
> + }
> +
> + //
> + // Convert Buffer Data to <ConfigResp> by helper function BlockToConfig( )
> + //
> + Status = gHiiConfigRouting->BlockToConfig(
> + gHiiConfigRouting,
> + ConfigRequest,
> + (UINT8*)&gHiiConfiguration,
> + sizeof(OPAL_HII_CONFIGURATION),
> + Results,
> + Progress
> + );
> +
> + //
> + // Free the allocated config request string.
> + //
> + if (AllocatedRequest) {
> + FreePool (ConfigRequest);
> + ConfigRequest = NULL;
> + }
> +
> + //
> + // Set Progress string to the original request string.
> + //
> + if (Request == NULL) {
> + *Progress = NULL;
> + } else if (StrStr (Request, L"OFFSET") == NULL) {
> + *Progress = Request + StrLen (Request);
> + }
> +
> + return (Status);
> +}
> +
> +
> +/**
> +
> + Pass the current system state to the bios via the hii_G_Configuration.
> +
> +**/
> +VOID
> +OpalHiiSetBrowserData (
> + VOID
> + )
> +{
> + HiiSetBrowserData(
> + &gHiiSetupVariableGuid,
> + (CHAR16*)L"OpalHiiConfig",
> + sizeof(gHiiConfiguration),
> + (UINT8*)&gHiiConfiguration,
> + NULL
> + );
> +}
> +
> +
> +/**
> +
> + Populate the hii_g_Configuraton with the browser Data.
> +
> +**/
> +VOID
> +OpalHiiGetBrowserData (
> + VOID
> + )
> +{
> + HiiGetBrowserData(
> + &gHiiSetupVariableGuid,
> + (CHAR16*)L"OpalHiiConfig",
> + sizeof(gHiiConfiguration),
> + (UINT8*)&gHiiConfiguration
> + );
> +}
> +
> +/**
> + Set a string Value in a form.
> +
> + @param DestStringId The stringid which need to update.
> + @param SrcAsciiStr The string nned to update.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiSetFormString(
> + EFI_STRING_ID DestStringId,
> + CHAR8 *SrcAsciiStr
> + )
> +{
> + UINT32 Len;
> + UINT32 UniSize;
> + CHAR16* UniStr;
> +
> + //
> + // Determine the Length of the sting
> + //
> + Len = ( UINT32 )AsciiStrLen( SrcAsciiStr );
> +
> + //
> + // Allocate space for the unicode string, including terminator
> + //
> + UniSize = (Len + 1) * sizeof(CHAR16);
> + UniStr = (CHAR16*)AllocateZeroPool(UniSize);
> +
> + //
> + // Copy into unicode string, then copy into string id
> + //
> + AsciiStrToUnicodeStrS ( SrcAsciiStr, UniStr, Len + 1);
> +
> + //
> + // Update the string in the form
> + //
> + if (HiiSetString(gHiiPackageListHandle, DestStringId, UniStr, NULL) == 0) {
> + DEBUG ((DEBUG_INFO, "HiiSetFormString( ) failed\n"));
> + FreePool(UniStr);
> + return (EFI_OUT_OF_RESOURCES);
> + }
> +
> + //
> + // Free the memory
> + //
> + FreePool(UniStr);
> +
> + return (EFI_SUCCESS);
> +}
> +
> +/**
> + Initialize the Opal disk base on the hardware info get from device.
> +
> + @param Dev The Opal device.
> +
> + @retval EFI_SUCESS Initialize the device success.
> + @retval EFI_DEVICE_ERROR Get info from device failed.
> +
> +**/
> +EFI_STATUS
> +OpalDiskInitialize (
> + IN OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + TCG_RESULT TcgResult;
> + OPAL_SESSION Session;
> +
> + ZeroMem(&Dev->OpalDisk, sizeof(OPAL_DISK));
> + Dev->OpalDisk.Sscp = Dev->Sscp;
> + Dev->OpalDisk.MediaId = Dev->MediaId;
> + Dev->OpalDisk.OpalDevicePath = Dev->OpalDevicePath;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->Sscp;
> + Session.MediaId = Dev->MediaId;
> +
> + TcgResult = OpalGetSupportedAttributesInfo (&Session,
> &Dev->OpalDisk.SupportedAttributes, &Dev->OpalDisk.OpalBaseComId);
> + if (TcgResult != TcgResultSuccess) {
> + return EFI_DEVICE_ERROR;
> + }
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + TcgResult = OpalUtilGetMsid (&Session, Dev->OpalDisk.Msid,
> OPAL_MSID_LENGHT, &Dev->OpalDisk.MsidLength);
> + if (TcgResult != TcgResultSuccess) {
> + return EFI_DEVICE_ERROR;
> + }
> +
> + return OpalDiskUpdateStatus (&Dev->OpalDisk);
> +}
> +
> +/**
> + Update the device info.
> +
> + @param OpalDisk The Opal device.
> +
> + @retval EFI_SUCESS Initialize the device success.
> + @retval EFI_DEVICE_ERROR Get info from device failed.
> + @retval EFI_INVALID_PARAMETER Not get Msid info before get ownership
> info.
> +
> +**/
> +EFI_STATUS
> +OpalDiskUpdateStatus (
> + OPAL_DISK *OpalDisk
> + )
> +{
> + TCG_RESULT TcgResult;
> + OPAL_SESSION Session;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = OpalDisk->Sscp;
> + Session.MediaId = OpalDisk->MediaId;
> + Session.OpalBaseComId = OpalDisk->OpalBaseComId;
> +
> + TcgResult = OpalGetLockingInfo(&Session, &OpalDisk->LockingFeature);
> + if (TcgResult != TcgResultSuccess) {
> + return EFI_DEVICE_ERROR;
> + }
> +
> + if (OpalDisk->MsidLength == 0) {
> + return EFI_INVALID_PARAMETER;
> + } else {
> + //
> + // Base on the Msid info to get the ownership, so Msid info must get first.
> + //
> + OpalDisk->Owner = OpalUtilDetermineOwnership(&Session,
> OpalDisk->Msid, OpalDisk->MsidLength);
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
> new file mode 100644
> index 000000000000..a1b1131c1380
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
> @@ -0,0 +1,380 @@
> +/** @file
> + Public Header file of HII library used by Opal UEFI Driver.
> + Defines required callbacks of Opal HII library.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef _OPAL_HII_H_
> +#define _OPAL_HII_H_
> +
> +#include <Protocol/HiiConfigAccess.h>
> +
> +#include "OpalDriver.h"
> +#include "OpalHiiFormValues.h"
> +
> +#define OPAL_PASSWORD_CONFIG_GUID \
> + { \
> + 0x0d510a4f, 0xa81b, 0x473f, { 0x87, 0x07, 0xb7, 0xfd, 0xfb, 0xc0, 0x45,
> 0xba } \
> + }
> +
> +#pragma pack(1)
> +
> +typedef struct {
> + UINT16 Id: HII_KEY_ID_BITS;
> + UINT16 Index: HII_KEY_INDEX_BITS;
> + UINT16 Flag: HII_KEY_FLAG_BITS;
> +} KEY_BITS;
> +
> +typedef union {
> + UINT16 Raw;
> + KEY_BITS KeyBits;
> +} HII_KEY;
> +
> +typedef struct {
> + VENDOR_DEVICE_PATH VendorDevicePath;
> + EFI_DEVICE_PATH_PROTOCOL End;
> +} HII_VENDOR_DEVICE_PATH;
> +
> +#pragma pack()
> +
> +extern const EFI_GUID gHiiSetupVariableGuid;
> +
> +/**
> + This function processes the results of changes in configuration.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Configuration A null-terminated Unicode string in
> <ConfigResp>
> + format.
> + @param Progress A pointer to a string filled in with the
> offset of
> + the most recent '&' before the first
> failing
> + name/value pair (or the beginning of the
> string if
> + the failure is in the first name/value pair)
> or
> + the terminating NULL if all was
> successful.
> +
> + @retval EFI_SUCCESS The Results is processed successfully.
> + @retval EFI_INVALID_PARAMETER Configuration is NULL.
> + @retval EFI_NOT_FOUND Routing data doesn't match any
> storage in this
> + driver.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +RouteConfig(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + CONST EFI_STRING Configuration,
> + EFI_STRING *Progress
> + );
> +
> +/**
> + This function allows a caller to extract the current configuration for one
> + or more named elements from the target driver.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Request A null-terminated Unicode string in
> + <ConfigRequest> format.
> + @param Progress On return, points to a character in the
> Request
> + string. Points to the string's null
> terminator if
> + request was successful. Points to the
> most recent
> + '&' before the first failing name/value
> pair (or
> + the beginning of the string if the failure
> is in
> + the first name/value pair) if the request
> was not
> + successful.
> + @param Results A null-terminated Unicode string in
> + <ConfigAltResp> format which has all
> values filled
> + in for the names in the Request string.
> String to
> + be allocated by the called function.
> +
> + @retval EFI_SUCCESS The Results is filled with the requested
> values.
> + @retval EFI_OUT_OF_RESOURCES Not enough memory to store the
> results.
> + @retval EFI_INVALID_PARAMETER Request is illegal syntax, or unknown
> name.
> + @retval EFI_NOT_FOUND Routing data doesn't match any
> storage in this
> + driver.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ExtractConfig(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + CONST EFI_STRING Request,
> + EFI_STRING *Progress,
> + EFI_STRING *Results
> + );
> +
> +/**
> + This function processes the results of changes in configuration.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Action Specifies the type of action taken by the
> browser.
> + @param QuestionId A unique value which is sent to the
> original
> + exporting driver so that it can identify
> the type
> + of data to expect.
> + @param Type The type of value for the question.
> + @param Value A pointer to the data being sent to the
> original
> + exporting driver.
> + @param ActionRequest On return, points to the action
> requested by the
> + callback function.
> +
> + @retval EFI_SUCCESS The callback successfully handled the
> action.
> + @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold
> the
> + variable and its data.
> + @retval EFI_DEVICE_ERROR The variable could not be saved.
> + @retval EFI_UNSUPPORTED The specified Action is not supported
> by the
> + callback.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +DriverCallback(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL* This,
> + EFI_BROWSER_ACTION Action,
> + EFI_QUESTION_ID QuestionId,
> + UINT8 Type,
> + EFI_IFR_TYPE_VALUE* Value,
> + EFI_BROWSER_ACTION_REQUEST* ActionRequest
> + );
> +
> +/**
> +
> + Pass the current system state to the bios via the hii_G_Configuration.
> +
> +**/
> +VOID
> +OpalHiiSetBrowserData (
> + VOID
> + );
> +
> +/**
> +
> + Populate the hii_g_Configuraton with the browser Data.
> +
> +**/
> +VOID
> +OpalHiiGetBrowserData (
> + VOID
> + );
> +
> +/**
> + Draws the disk info form.
> +
> + @retval EFI_SUCCESS Draw the disk info success.
> +
> +**/
> +EFI_STATUS
> +HiiPopulateDiskInfoForm(
> + VOID
> + );
> +
> +/**
> + Update the global Disk index info.
> +
> + @param Index The input disk index info.
> +
> + @retval EFI_SUCCESS Update the disk index info success.
> +
> +**/
> +EFI_STATUS
> +HiiSelectDisk(
> + UINT8 Index
> + );
> +
> +/**
> + Use the input password to do the specified action.
> +
> + @param Str The input password saved in.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiPasswordEntered(
> + EFI_STRING_ID Str
> + );
> +
> +/**
> + Update block sid info.
> +
> + @param PpRequest Input the Pp Request.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiSetBlockSidAction (
> + UINT32 PpRequest
> + );
> +
> +/**
> + Reverts the Opal disk to factory default.
> +
> + @param PsidStringId The string id for the PSID info.
> +
> + @retval EFI_SUCCESS Do the required action success.
> +
> +**/
> +EFI_STATUS
> +HiiPsidRevert(
> + EFI_STRING_ID PsidStringId
> + );
> +
> +/**
> + Get disk name string id.
> +
> + @param DiskIndex The input disk index info.
> +
> + @retval The disk name string id.
> +
> +**/
> +EFI_STRING_ID
> +GetDiskNameStringId(
> + UINT8 DiskIndex
> + );
> +
> +/**
> + Update the device info.
> +
> + @param OpalDisk The Opal device.
> +
> + @retval EFI_SUCESS Initialize the device success.
> + @retval EFI_DEVICE_ERROR Get info from device failed.
> + @retval EFI_INVALID_PARAMETER Not get Msid info before get ownership
> info.
> +
> +**/
> +EFI_STATUS
> +OpalDiskUpdateStatus (
> + OPAL_DISK *OpalDisk
> + );
> +
> +/**
> + Get the driver image handle.
> +
> + @retval the driver image handle.
> +
> +**/
> +EFI_HANDLE
> +HiiGetDriverImageHandleCB(
> + VOID
> + );
> +
> +/**
> + Install the HII form and string packages.
> +
> + @retval EFI_SUCCESS Install all the resources success.
> + @retval EFI_OUT_OF_RESOURCES Out of resource error.
> +**/
> +EFI_STATUS
> +OpalHiiAddPackages(
> + VOID
> + );
> +
> +/**
> + Check whether enable feature or not.
> +
> + @retval Return the disk number.
> +
> +**/
> +UINT8
> +HiiGetNumConfigRequiredOpalDisksCB(
> + VOID
> + );
> +
> +/**
> + Returns the driver name.
> +
> + @retval Returns the driver name.
> +
> +**/
> +CHAR16*
> +HiiGetDriverNameCB(
> + VOID
> + );
> +
> +/**
> + Returns the opaque pointer to a physical disk context.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval The device pointer.
> +
> +**/
> +OPAL_DISK*
> +HiiGetOpalDiskCB(
> + UINT8 DiskIndex
> + );
> +
> +/**
> + Returns the disk name.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval Returns the disk name.
> +
> +**/
> +CHAR8*
> +HiiDiskGetNameCB(
> + UINT8 DiskIndex
> + );
> +
> +/**
> + Set a string Value in a form.
> +
> + @param DestStringId The stringid which need to update.
> + @param SrcAsciiStr The string nned to update.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiSetFormString(
> + EFI_STRING_ID DestStringId,
> + CHAR8 *SrcAsciiStr
> + );
> +
> +/**
> + Install the HII related resources.
> +
> + @retval EFI_SUCCESS Install all the resources success.
> + @retval other Error occur when install the resources.
> +**/
> +EFI_STATUS
> +HiiInstall(
> + VOID
> + );
> +
> +/**
> + Uninstall the HII capability.
> +
> + @retval EFI_SUCCESS Uninstall all the resources success.
> + @retval others Other errors occur when unistall the hii
> resource.
> +**/
> +EFI_STATUS
> +HiiUninstall(
> + VOID
> + );
> +
> +/**
> + Initialize the Opal disk base on the hardware info get from device.
> +
> + @param Dev The Opal device.
> +
> + @retval EFI_SUCESS Initialize the device success.
> + @retval EFI_DEVICE_ERROR Get info from device failed.
> +
> +**/
> +EFI_STATUS
> +OpalDiskInitialize (
> + IN OPAL_DRIVER_DEVICE *Dev
> + );
> +
> +#endif // _HII_H_
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
> new file mode 100644
> index 000000000000..b07e38c1449d
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
> @@ -0,0 +1,219 @@
> +/** @file
> + Callbacks required by the HII of the Opal UEFI Driver to help display
> + Opal device information.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalHii.h"
> +
> +/**
> + Get Opal var name.
> + The return Value must be freed by caller if not NULL
> +
> + @param OpalDisk The disk.
> + @param Prefix The prefix string.
> +
> + @retval The var name string.
> +
> +**/
> +CHAR16*
> +OpalDriverGetOpalVarName(
> + OPAL_DISK *OpalDisk,
> + const CHAR16 *Prefix
> + )
> +{
> + OPAL_DRIVER_DEVICE* Dev;
> + UINTN PrefixLen;
> + UINTN NameLen;
> + UINTN VarNameLen;
> + CHAR16* VarName;
> +
> + Dev = DRIVER_DEVICE_FROM_OPALDISK(OpalDisk);
> + if (Dev == NULL) {
> + return NULL;
> + }
> +
> + PrefixLen = StrLen(Prefix);
> +
> + NameLen = 0;
> + if (Dev->Name16 != NULL) {
> + NameLen = StrLen(Dev->Name16);
> + }
> +
> + VarNameLen = PrefixLen + NameLen;
> +
> + VarName = (CHAR16*)AllocateZeroPool((VarNameLen + 1) *
> sizeof(CHAR16));
> + if (VarName == NULL) {
> + return NULL;
> + }
> +
> + CopyMem(VarName, Prefix, PrefixLen * sizeof(CHAR16));
> + if (Dev->Name16 != NULL) {
> + CopyMem(VarName + PrefixLen, Dev->Name16, NameLen *
> sizeof(CHAR16));
> + }
> + VarName[VarNameLen] = 0;
> +
> + return VarName;
> +}
> +
> +/**
> + Get the driver image handle.
> +
> + @retval the driver image handle.
> +
> +**/
> +EFI_HANDLE
> +HiiGetDriverImageHandleCB(
> + VOID
> + )
> +{
> + return gImageHandle;
> +}
> +
> +/**
> + Check whether enable feature or not.
> +
> + @retval Return the disk number.
> +
> +**/
> +UINT8
> +HiiGetNumConfigRequiredOpalDisksCB(
> + VOID
> + )
> +{
> + UINT8 NumDisks;
> + UINT8 NumLockedOpalDisks;
> + OPAL_DISK *OpalDisk;
> + UINT8 Index;
> +
> + NumLockedOpalDisks = 0;
> +
> + NumDisks = GetDeviceCount();
> +
> + for (Index = 0; Index < NumDisks; Index++) {
> + OpalDisk = HiiGetOpalDiskCB(Index);
> +
> + if (OpalDisk != NULL) {
> + if (!OpalFeatureEnabled (&OpalDisk->SupportedAttributes,
> &OpalDisk->LockingFeature)) {
> + DEBUG ((DEBUG_INFO, "Ignoring disk %u because feature is disabled
> or health has already been inspected\n", Index));
> + } else if (OpalDeviceLocked (&OpalDisk->SupportedAttributes,
> &OpalDisk->LockingFeature)) {
> + NumLockedOpalDisks++;
> + }
> + }
> + }
> +
> + return NumLockedOpalDisks;
> +}
> +
> +
> +
> +/**
> + Returns the opaque pointer to a physical disk context.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval The device pointer.
> +
> +**/
> +VOID *
> +HiiGetDiskContextCB(
> + UINT8 DiskIndex
> + )
> +{
> + OPAL_DRIVER_DEVICE* Dev;
> + UINT8 CurrentDisk;
> +
> + Dev = OpalDriverGetDeviceList();
> + CurrentDisk = 0;
> +
> + if (DiskIndex >= GetDeviceCount()) {
> + return NULL;
> + }
> +
> + while (Dev != NULL) {
> + if (CurrentDisk == DiskIndex) {
> + return Dev;
> + } else {
> + Dev = Dev->Next;
> + CurrentDisk++;
> + }
> + }
> +
> + return NULL;
> +}
> +
> +/**
> + Returns the opaque pointer to a physical disk context.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval The device pointer.
> +
> +**/
> +OPAL_DISK*
> +HiiGetOpalDiskCB(
> + UINT8 DiskIndex
> + )
> +{
> + VOID *Ctx;
> + OPAL_DRIVER_DEVICE *Tmp;
> +
> + Ctx = HiiGetDiskContextCB (DiskIndex);
> +
> + if (Ctx == NULL) {
> + return NULL;
> + }
> +
> + Tmp = (OPAL_DRIVER_DEVICE*) Ctx;
> +
> + return &Tmp->OpalDisk;
> +}
> +
> +/**
> + Returns the disk name.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval Returns the disk name.
> +
> +**/
> +CHAR8*
> +HiiDiskGetNameCB(
> + UINT8 DiskIndex
> + )
> +{
> + OPAL_DRIVER_DEVICE* Ctx;
> +
> + Ctx = (OPAL_DRIVER_DEVICE*) HiiGetDiskContextCB (DiskIndex);
> +
> + if (Ctx != NULL) {
> + if (Ctx->NameZ == NULL) {
> + OpalDriverGetDriverDeviceName (Ctx);
> + }
> + return Ctx->NameZ;
> + }
> + return NULL;
> +}
> +
> +/**
> + Returns the driver name.
> +
> + @retval Returns the driver name.
> +
> +**/
> +CHAR16*
> +HiiGetDriverNameCB(
> + VOID
> + )
> +{
> + return (CHAR16*)EFI_DRIVER_NAME_UNICODE;
> +}
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
> new file mode 100644
> index 000000000000..69abc561cc56
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
> @@ -0,0 +1,84 @@
> +// /** @file
> +//
> +// String definitions for Setup formset.
> +//
> +// Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +//
> +// This program and the accompanying materials
> +// are licensed and made available under the terms and conditions of the BSD
> License
> +// which accompanies this distribution. The full text of the license may be found
> at
> +// http://opensource.org/licenses/bsd-license.php
> +//
> +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +//
> +// **/
> +
> +/=#
> +///////////////////////////////// GENERIC DEFINITIONS
> /////////////////////////////////
> +#langdef en-US "English"
> +#string STR_NULL #language en-US " "
> +
> +///////////////////////////////// FORM SET /////////////////////////////////
> +#string STR_FORM_SET_HELP #language en-US
> "Manage Opal disks"
> +
> +///////////////////////////////// MULTIPLE FORMS
> /////////////////////////////////
> +#string STR_OPAL #language en-US
> "Opal"
> +#string STR_MAIN_OPAL_VERSION #language en-US
> "Version 00.0.0.0000"
> +
> +///////////////////////////////// MAIN MENU FORM
> /////////////////////////////////
> +#string STR_MAIN_PHY_DISKS_LBL #language en-US
> "Physical Disks:"
> +
> +#string STR_MAIN_GOTO_DISK_INFO_0 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_1 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_2 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_3 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_4 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_5 #language en-US " "
> +
> +#string STR_MAIN_GOTO_DISK_INFO_HELP #language en-US
> "Select to see Opal disk actions"
> +
> +#string STR_MAIN_NO_DISKS_PRESENT_LBL #language en-US
> "No disks connected to system"
> +
> +///////////////////////////////// DISK INFO MENU FORM
> /////////////////////////////////
> +#string STR_DISK_INFO_SELECTED_DISK_NAME #language en-US " "
> +
> +#string STR_DISK_INFO_LOCK #language en-US
> "Lock"
> +#string STR_DISK_INFO_UNLOCK #language en-US
> "Unlock"
> +#string STR_DISK_INFO_SET_ADMIN_PSWD #language en-US
> "Update Drive Admin Password"
> +#string STR_DISK_INFO_SET_USER_PSWD #language en-US
> "Set Drive User Password"
> +#string STR_DISK_INFO_SECURE_ERASE #language en-US
> "Secure Erase User Data"
> +#string STR_DISK_INFO_PSID_REVERT #language en-US
> "PSID Revert to factory default"
> +#string STR_DISK_INFO_REVERT #language en-US
> "Admin Revert to factory default and Disable"
> +#string STR_DISK_INFO_DISABLE_USER #language en-US
> "Disable User"
> +#string STR_DISK_INFO_ENABLE_FEATURE #language en-US
> "Enable Feature"
> +#string STR_DISK_INFO_ENABLE_BLOCKSID #language en-US
> "TCG Storage Action"
> +#string STR_ENABLED #language en-US
> "Enable BlockSID"
> +#string STR_DISABLED #language en-US
> "Disable BlockSID"
> +
> +#string STR_NONE #language en-US
> "None"
> +#string STR_DISK_INFO_ENABLE_BLOCKSID_TRUE #language en-US
> "Require physical presence when remote enable BlockSID"
> +#string STR_DISK_INFO_ENABLE_BLOCKSID_FALSE #language en-US
> "Not require physical presence when remote enable BlockSID"
> +#string STR_DISK_INFO_DISABLE_BLOCKSID_TRUE #language en-US
> "Require physical presence when remote disable BlockSID"
> +#string STR_DISK_INFO_DISABLE_BLOCKSID_FALSE #language en-US
> "Not require physical presence when remote disable BlockSID"
> +
> +#string STR_BLOCKSID_STATUS_HELP #language en-US
> "BlockSID action change status"
> +#string STR_BLOCKSID_STATUS #language en-US
> "Current BlockSID Status:"
> +#string STR_BLOCKSID_STATUS1 #language en-US ""
> +#string STR_BLOCKSID_STATUS2 #language en-US ""
> +#string STR_BLOCKSID_STATUS3 #language en-US ""
> +
> +#string STR_OPAL_REQUESTS_LBL #language en-US
> "Opal Requests:"
> +#string STR_DISK_INFO_LOCK_HELP #language en-US
> "Lock the disk"
> +#string STR_DISK_INFO_UNLOCK_HELP #language en-US
> "Unlock the disk"
> +#string STR_DISK_INFO_SET_ADMIN_PSWD_HELP #language en-US
> "Set password for the administrator"
> +#string STR_DISK_INFO_SET_USER_PSWD_HELP #language en-US
> "Set password for User 1"
> +#string STR_DISK_INFO_SECURE_ERASE_HELP #language en-US
> "Securely erase the disk"
> +#string STR_DISK_INFO_REVERT_HELP #language en-US
> "Revert the disk to factory defaults"
> +#string STR_DISK_INFO_PSID_REVERT_HELP #language en-US
> "Revert the disk to factory defaults, PSID is a 32 character case sensitive value"
> +#string STR_DISK_INFO_DISABLE_USER_HELP #language en-US
> "Disable User"
> +#string STR_DISK_INFO_ENABLE_FEATURE_HELP #language en-US
> "Enable Feature"
> +#string STR_KEEP_USER_DATA_PROMPT #language en-US "
> Keep User Data"
> +#string STR_KEEP_USER_DATA_HELP #language en-US
> "Check to keep user data, otherwise data will be lost"
> +
> +#string STR_DISK_INFO_ENABLE_BLOCKSID_HELP #language en-US
> "Change BlockSID actions, includes enable or disable BlockSID, Require or not
> require physical presence when remote enable or disable BlockSID"
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
> new file mode 100644
> index 000000000000..3ff7d4726d5e
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
> @@ -0,0 +1,123 @@
> +/** @file
> + Defines Opal HII form ids, structures and values.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +
> +#ifndef _OPAL_HII_FORM_VALUES_H_
> +#define _OPAL_HII_FORM_VALUES_H_
> +
> +// ID's for various forms that will be used by HII
> +#define FORMID_VALUE_MAIN_MENU 0x01
> +#define FORMID_VALUE_DISK_INFO_FORM_MAIN 0x02
> +
> +#define OPAL_REQUEST_VARIABLE_NAME
> L"OpalRequest"
> +
> +#pragma pack(1)
> +typedef struct {
> + UINT16 Lock:1;
> + UINT16 Unlock:1;
> + UINT16 SetAdminPwd:1;
> + UINT16 SetUserPwd:1;
> + UINT16 SecureErase:1;
> + UINT16 Revert:1;
> + UINT16 PsidRevert:1;
> + UINT16 DisableUser:1;
> + UINT16 DisableFeature:1;
> + UINT16 EnableFeature:1;
> + UINT16 Reserved:5;
> + UINT16 KeepUserData:1;
> +} OPAL_REQUEST;
> +
> +typedef struct {
> + UINT8 NumDisks;
> + UINT8 SelectedDiskIndex;
> + UINT16 SelectedDiskAvailableActions;
> + UINT16 SupportedDisks;
> + BOOLEAN KeepUserDataForced;
> + OPAL_REQUEST OpalRequest;
> + UINT8 EnableBlockSid;
> +} OPAL_HII_CONFIGURATION;
> +
> +typedef struct {
> + UINT32 Length;
> + OPAL_REQUEST OpalRequest;
> + //EFI_DEVICE_PATH_PROTOCOL OpalDevicePath;
> +} OPAL_REQUEST_VARIABLE;
> +
> +#pragma pack()
> +
> +/* Action Flags */
> +#define HII_ACTION_NONE
> 0x0000
> +#define HII_ACTION_LOCK
> 0x0001
> +#define HII_ACTION_UNLOCK
> 0x0002
> +#define HII_ACTION_SET_ADMIN_PWD
> 0x0004
> +#define HII_ACTION_SET_USER_PWD
> 0x0008
> +#define HII_ACTION_SECURE_ERASE
> 0x0010
> +#define HII_ACTION_REVERT
> 0x0020
> +#define HII_ACTION_PSID_REVERT
> 0x0040
> +#define HII_ACTION_DISABLE_USER
> 0x0080
> +#define HII_ACTION_DISABLE_FEATURE
> 0x0100
> +#define HII_ACTION_ENABLE_FEATURE
> 0x0200
> +
> +/* Number of bits allocated for each part of a unique key for an HII_ITEM
> + * all bits together must be <= 16 (EFI_QUESTION_ID is UINT16)
> + * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
> + * | |-----------------------| |---------------------------|
> + * FLG INDEX ID
> + */
> +#define HII_KEY_ID_BITS 8
> +#define HII_KEY_INDEX_BITS 7
> +#define HII_KEY_FLAG_BITS 1
> +
> +#define HII_KEY_FLAG 0x8000
> // bit 15 (zero based)
> +
> +/***********/
> +/* Key IDs */
> +/***********/
> +
> +#define HII_KEY_ID_GOTO_DISK_INFO 1
> +
> +#define HII_KEY_ID_VAR_SUPPORTED_DISKS 2
> +#define HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS 3
> +
> +#define HII_KEY_ID_BLOCKSID 4
> +#define HII_KEY_ID_SET_ADMIN_PWD 5
> +#define HII_KEY_ID_SET_USER_PWD 6
> +#define HII_KEY_ID_SECURE_ERASE 7
> +#define HII_KEY_ID_REVERT 8
> +#define HII_KEY_ID_KEEP_USER_DATA 9
> +#define HII_KEY_ID_PSID_REVERT 0xA
> +#define HII_KEY_ID_DISABLE_USER 0xB
> +#define HII_KEY_ID_ENABLE_FEATURE 0xC
> +
> +#define HII_KEY_ID_MAX 0xC
> // !!Update each time a new ID is added!!
> +
> +#define HII_KEY_WITH_INDEX(id, index) \
> + ( \
> + HII_KEY_FLAG | \
> + (id) | \
> + ((index) << HII_KEY_ID_BITS) \
> + )
> +
> +#define HII_KEY(id) HII_KEY_WITH_INDEX(id, 0)
> +
> +#define PACKAGE_LIST_GUID { 0xf0308176, 0x9058, 0x4153, { 0x93, 0x3d,
> 0xda, 0x2f, 0xdc, 0xc8, 0x3e, 0x44 } }
> +
> +/* {410483CF-F4F9-4ece-848A-1958FD31CEB7} */
> +#define SETUP_FORMSET_GUID { 0x410483cf, 0xf4f9, 0x4ece, { 0x84, 0x8a,
> 0x19, 0x58, 0xfd, 0x31, 0xce, 0xb7 } }
> +
> +// {BBF1ACD2-28D8-44ea-A291-58A237FEDF1A}
> +#define SETUP_VARIABLE_GUID { 0xbbf1acd2, 0x28d8, 0x44ea, { 0xa2, 0x91,
> 0x58, 0xa2, 0x37, 0xfe, 0xdf, 0x1a } }
> +
> +#endif //_HII_FORM_VALUES_H_
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
> new file mode 100644
> index 000000000000..7657bb26e23c
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
> @@ -0,0 +1,2144 @@
> +/** @file
> + Provide functions to initialize NVME controller and perform NVME
> commands
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalPasswordPei.h"
> +
> +
> +#define ALIGN(v, a) (UINTN)((((v) - 1) | ((a) - 1)) +
> 1)
> +
> +///
> +/// NVME Host controller registers operation
> +///
> +#define NVME_GET_CAP(Nvme, Cap) NvmeMmioRead (Cap,
> Nvme->Nbar + NVME_CAP_OFFSET, sizeof (NVME_CAP))
> +#define NVME_GET_CC(Nvme, Cc) NvmeMmioRead (Cc,
> Nvme->Nbar + NVME_CC_OFFSET, sizeof (NVME_CC))
> +#define NVME_SET_CC(Nvme, Cc) NvmeMmioWrite
> (Nvme->Nbar + NVME_CC_OFFSET, Cc, sizeof (NVME_CC))
> +#define NVME_GET_CSTS(Nvme, Csts) NvmeMmioRead (Csts,
> Nvme->Nbar + NVME_CSTS_OFFSET, sizeof (NVME_CSTS))
> +#define NVME_GET_AQA(Nvme, Aqa) NvmeMmioRead (Aqa,
> Nvme->Nbar + NVME_AQA_OFFSET, sizeof (NVME_AQA))
> +#define NVME_SET_AQA(Nvme, Aqa) NvmeMmioWrite
> (Nvme->Nbar + NVME_AQA_OFFSET, Aqa, sizeof (NVME_AQA))
> +#define NVME_GET_ASQ(Nvme, Asq) NvmeMmioRead (Asq,
> Nvme->Nbar + NVME_ASQ_OFFSET, sizeof (NVME_ASQ))
> +#define NVME_SET_ASQ(Nvme, Asq) NvmeMmioWrite
> (Nvme->Nbar + NVME_ASQ_OFFSET, Asq, sizeof (NVME_ASQ))
> +#define NVME_GET_ACQ(Nvme, Acq) NvmeMmioRead (Acq,
> Nvme->Nbar + NVME_ACQ_OFFSET, sizeof (NVME_ACQ))
> +#define NVME_SET_ACQ(Nvme, Acq) NvmeMmioWrite
> (Nvme->Nbar + NVME_ACQ_OFFSET, Acq, sizeof (NVME_ACQ))
> +#define NVME_GET_VER(Nvme, Ver) NvmeMmioRead (Ver,
> Nvme->Nbar + NVME_VER_OFFSET, sizeof (NVME_VER))
> +#define NVME_SET_SQTDBL(Nvme, Qid, Sqtdbl) NvmeMmioWrite
> (Nvme->Nbar + NVME_SQTDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Sqtdbl, sizeof
> (NVME_SQTDBL))
> +#define NVME_SET_CQHDBL(Nvme, Qid, Cqhdbl) NvmeMmioWrite
> (Nvme->Nbar + NVME_CQHDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Cqhdbl, sizeof
> (NVME_CQHDBL))
> +
> +///
> +/// Base memory address
> +///
> +enum {
> + BASEMEM_CONTROLLER_DATA,
> + BASEMEM_IDENTIFY_DATA,
> + BASEMEM_ASQ,
> + BASEMEM_ACQ,
> + BASEMEM_SQ,
> + BASEMEM_CQ,
> + BASEMEM_PRP,
> + BASEMEM_SECURITY,
> + MAX_BASEMEM_COUNT
> +};
> +
> +///
> +/// All of base memories are 4K(0x1000) alignment
> +///
> +#define NVME_MEM_BASE(Nvme)
> ((UINTN)(Nvme->BaseMem))
> +#define NVME_CONTROL_DATA_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages
> (BASEMEM_CONTROLLER_DATA)) * EFI_PAGE_SIZE),
> EFI_PAGE_SIZE))
> +#define NVME_NAMESPACE_DATA_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages
> (BASEMEM_IDENTIFY_DATA)) * EFI_PAGE_SIZE),
> EFI_PAGE_SIZE))
> +#define NVME_ASQ_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ASQ))
> * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_ACQ_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ACQ))
> * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_SQ_BASE(Nvme, index) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SQ) +
> ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_CQ_BASE(Nvme, index) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_CQ) +
> ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_PRP_BASE(Nvme, index) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_PRP) +
> ((index)*NVME_PRP_SIZE)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_SEC_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SECURITY))
> * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +
> +/**
> + Transfer MMIO Data to memory.
> +
> + @param[in,out] MemBuffer - Destination: Memory address
> + @param[in] MmioAddr - Source: MMIO address
> + @param[in] Size - Size for read
> +
> + @retval EFI_SUCCESS - MMIO read sucessfully
> +**/
> +EFI_STATUS
> +NvmeMmioRead (
> + IN OUT VOID *MemBuffer,
> + IN UINTN MmioAddr,
> + IN UINTN Size
> + )
> +{
> + UINTN Offset;
> + UINT8 Data;
> + UINT8 *Ptr;
> +
> + // priority has adjusted
> + switch (Size) {
> + case 4:
> + *((UINT32 *)MemBuffer) = MmioRead32 (MmioAddr);
> + break;
> +
> + case 8:
> + *((UINT64 *)MemBuffer) = MmioRead64 (MmioAddr);
> + break;
> +
> + case 2:
> + *((UINT16 *)MemBuffer) = MmioRead16 (MmioAddr);
> + break;
> +
> + case 1:
> + *((UINT8 *)MemBuffer) = MmioRead8 (MmioAddr);
> + break;
> +
> + default:
> + Ptr = (UINT8 *)MemBuffer;
> + for (Offset = 0; Offset < Size; Offset += 1) {
> + Data = MmioRead8 (MmioAddr + Offset);
> + Ptr[Offset] = Data;
> + }
> + break;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Transfer memory data to MMIO.
> +
> + @param[in,out] MmioAddr - Destination: MMIO address
> + @param[in] MemBuffer - Source: Memory address
> + @param[in] Size - Size for write
> +
> + @retval EFI_SUCCESS - MMIO write sucessfully
> +**/
> +EFI_STATUS
> +NvmeMmioWrite (
> + IN OUT UINTN MmioAddr,
> + IN VOID *MemBuffer,
> + IN UINTN Size
> + )
> +{
> + UINTN Offset;
> + UINT8 Data;
> + UINT8 *Ptr;
> +
> + // priority has adjusted
> + switch (Size) {
> + case 4:
> + MmioWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
> + break;
> +
> + case 8:
> + MmioWrite64 (MmioAddr, *((UINT64 *)MemBuffer));
> + break;
> +
> + case 2:
> + MmioWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
> + break;
> +
> + case 1:
> + MmioWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
> + break;
> +
> + default:
> + Ptr = (UINT8 *)MemBuffer;
> + for (Offset = 0; Offset < Size; Offset += 1) {
> + Data = Ptr[Offset];
> + MmioWrite8 (MmioAddr + Offset, Data);
> + }
> + break;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Transfer MMIO data to memory.
> +
> + @param[in,out] MemBuffer - Destination: Memory address
> + @param[in] MmioAddr - Source: MMIO address
> + @param[in] Size - Size for read
> +
> + @retval EFI_SUCCESS - MMIO read sucessfully
> +**/
> +EFI_STATUS
> +OpalPciRead (
> + IN OUT VOID *MemBuffer,
> + IN UINTN MmioAddr,
> + IN UINTN Size
> + )
> +{
> + UINTN Offset;
> + UINT8 Data;
> + UINT8 *Ptr;
> +
> + // priority has adjusted
> + switch (Size) {
> + case 4:
> + *((UINT32 *)MemBuffer) = PciRead32 (MmioAddr);
> + break;
> +
> + case 2:
> + *((UINT16 *)MemBuffer) = PciRead16 (MmioAddr);
> + break;
> +
> + case 1:
> + *((UINT8 *)MemBuffer) = PciRead8 (MmioAddr);
> + break;
> +
> + default:
> + Ptr = (UINT8 *)MemBuffer;
> + for (Offset = 0; Offset < Size; Offset += 1) {
> + Data = PciRead8 (MmioAddr + Offset);
> + Ptr[Offset] = Data;
> + }
> + break;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Transfer memory data to MMIO.
> +
> + @param[in,out] MmioAddr - Destination: MMIO address
> + @param[in] MemBuffer - Source: Memory address
> + @param[in] Size - Size for write
> +
> + @retval EFI_SUCCESS - MMIO write sucessfully
> +**/
> +EFI_STATUS
> +OpalPciWrite (
> + IN OUT UINTN MmioAddr,
> + IN VOID *MemBuffer,
> + IN UINTN Size
> + )
> +{
> + UINTN Offset;
> + UINT8 Data;
> + UINT8 *Ptr;
> +
> + // priority has adjusted
> + switch (Size) {
> + case 4:
> + PciWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
> + break;
> +
> + case 2:
> + PciWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
> + break;
> +
> + case 1:
> + PciWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
> + break;
> +
> + default:
> + Ptr = (UINT8 *)MemBuffer;
> + for (Offset = 0; Offset < Size; Offset += 1) {
> + Data = Ptr[Offset];
> + PciWrite8 (MmioAddr + Offset, Data);
> + }
> + break;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Get total pages for specific NVME based memory.
> +
> + @param[in] BaseMemIndex - The Index of BaseMem (0-based).
> +
> + @retval - The page count for specific BaseMem Index
> +
> +**/
> +UINT32
> +NvmeGetBaseMemPages (
> + IN UINTN BaseMemIndex
> + )
> +{
> + UINT32 Pages;
> + UINTN Index;
> + UINT32 PageSizeList[8];
> +
> + PageSizeList[0] = 1; /* Controller Data */
> + PageSizeList[1] = 1; /* Identify Data */
> + PageSizeList[2] = 1; /* ASQ */
> + PageSizeList[3] = 1; /* ACQ */
> + PageSizeList[4] = 1; /* SQs */
> + PageSizeList[5] = 1; /* CQs */
> + PageSizeList[6] = NVME_PRP_SIZE * NVME_CSQ_DEPTH; /* PRPs */
> + PageSizeList[7] = 1; /* Security Commands */
> +
> + if (BaseMemIndex > MAX_BASEMEM_COUNT) {
> + ASSERT (FALSE);
> + return 0;
> + }
> +
> + Pages = 0;
> + for (Index = 0; Index < BaseMemIndex; Index++) {
> + Pages += PageSizeList[Index];
> + }
> +
> + return Pages;
> +}
> +
> +/**
> + Wait for NVME controller status to be ready or not.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] WaitReady - Flag for waitting status ready or not
> +
> + @return EFI_SUCCESS - Successfully to wait specific status.
> + @return others - Fail to wait for specific controller
> status.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeWaitController (
> + IN NVME_CONTEXT *Nvme,
> + IN BOOLEAN WaitReady
> + )
> +{
> + NVME_CSTS Csts;
> + EFI_STATUS Status;
> + UINT32 Index;
> + UINT8 Timeout;
> +
> + //
> + // Cap.To specifies max delay time in 500ms increments for Csts.Rdy to set
> after
> + // Cc.Enable. Loop produces a 1 millisecond delay per itteration, up to 500 *
> Cap.To.
> + //
> + if (Nvme->Cap.To == 0) {
> + Timeout = 1;
> + } else {
> + Timeout = Nvme->Cap.To;
> + }
> +
> + Status = EFI_SUCCESS;
> + for(Index = (Timeout * 500); Index != 0; --Index) {
> + MicroSecondDelay (1000);
> +
> + //
> + // Check if the controller is initialized
> + //
> + Status = NVME_GET_CSTS (Nvme, &Csts);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n",
> Status));
> + return Status;
> + }
> +
> + if ((BOOLEAN) Csts.Rdy == WaitReady) {
> + break;
> + }
> + }
> +
> + if (Index == 0) {
> + Status = EFI_TIMEOUT;
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Disable the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully disable the controller.
> + @return others - Fail to disable the controller.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeDisableController (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVME_CC Cc;
> + NVME_CSTS Csts;
> + EFI_STATUS Status;
> +
> + Status = NVME_GET_CSTS (Nvme, &Csts);
> +
> + ///
> + /// Read Controller Configuration Register.
> + ///
> + Status = NVME_GET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
> + goto Done;
> + }
> +
> + if (Cc.En == 1) {
> + Cc.En = 0;
> + ///
> + /// Disable the controller.
> + ///
> + Status = NVME_SET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
> + goto Done;
> + }
> + }
> +
> + Status = NvmeWaitController (Nvme, FALSE);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n",
> Status));
> + goto Done;
> + }
> +
> + return EFI_SUCCESS;
> +
> +Done:
> + DEBUG ((DEBUG_INFO, "NvmeDisableController fail, Status: %r\n", Status));
> + return Status;
> +}
> +
> +/**
> + Enable the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully enable the controller.
> + @return EFI_DEVICE_ERROR - Fail to enable the controller.
> + @return EFI_TIMEOUT - Fail to enable the controller in
> given time slot.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeEnableController (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVME_CC Cc;
> + EFI_STATUS Status;
> +
> + //
> + // Enable the controller
> + //
> + ZeroMem (&Cc, sizeof (NVME_CC));
> + Cc.En = 1;
> + Cc.Iosqes = 6;
> + Cc.Iocqes = 4;
> + Status = NVME_SET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
> + goto Done;
> + }
> +
> + Status = NvmeWaitController (Nvme, TRUE);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n",
> Status));
> + goto Done;
> + }
> +
> + return EFI_SUCCESS;
> +
> +Done:
> + DEBUG ((DEBUG_INFO, "NvmeEnableController fail, Status: %r\n", Status));
> + return Status;
> +}
> +
> +/**
> + Shutdown the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully shutdown the
> controller.
> + @return EFI_DEVICE_ERROR - Fail to shutdown the controller.
> + @return EFI_TIMEOUT - Fail to shutdown the controller in
> given time slot.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeShutdownController (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVME_CC Cc;
> + NVME_CSTS Csts;
> + EFI_STATUS Status;
> + UINT32 Index;
> + UINTN Timeout;
> +
> + Status = NVME_GET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
> + return Status;
> + }
> +
> + Cc.Shn = 1; // Normal shutdown
> +
> + Status = NVME_SET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
> + return Status;
> + }
> +
> + Timeout = NVME_GENERIC_TIMEOUT/1000; // ms
> + for(Index = (UINT32)(Timeout); Index != 0; --Index) {
> + MicroSecondDelay (1000);
> +
> + Status = NVME_GET_CSTS (Nvme, &Csts);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n",
> Status));
> + return Status;
> + }
> +
> + if (Csts.Shst == 2) { // Shutdown processing complete
> + break;
> + }
> + }
> +
> + if (Index == 0) {
> + Status = EFI_TIMEOUT;
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Check the execution status from a given completion queue entry.
> +
> + @param[in] Cq - A pointer to the NVME_CQ item.
> +
> +**/
> +EFI_STATUS
> +NvmeCheckCqStatus (
> + IN NVME_CQ *Cq
> + )
> +{
> + if (Cq->Sct == 0x0 && Cq->Sc == 0x0) {
> + return EFI_SUCCESS;
> + }
> +
> + DEBUG ((DEBUG_INFO, "Dump NVMe Completion Entry Status from
> [0x%x]:\n", (UINTN)Cq));
> + DEBUG ((DEBUG_INFO, " SQ Identifier : [0x%x], Phase Tag : [%d], Cmd
> Identifier : [0x%x]\n", Cq->Sqid, Cq->Pt, Cq->Cid));
> + DEBUG ((DEBUG_INFO, " NVMe Cmd Execution Result - "));
> +
> + switch (Cq->Sct) {
> + case 0x0:
> + switch (Cq->Sc) {
> + case 0x0:
> + DEBUG ((DEBUG_INFO, "Successful Completion\n"));
> + return EFI_SUCCESS;
> + case 0x1:
> + DEBUG ((DEBUG_INFO, "Invalid Command Opcode\n"));
> + break;
> + case 0x2:
> + DEBUG ((DEBUG_INFO, "Invalid Field in Command\n"));
> + break;
> + case 0x3:
> + DEBUG ((DEBUG_INFO, "Command ID Conflict\n"));
> + break;
> + case 0x4:
> + DEBUG ((DEBUG_INFO, "Data Transfer Error\n"));
> + break;
> + case 0x5:
> + DEBUG ((DEBUG_INFO, "Commands Aborted due to Power Loss
> Notification\n"));
> + break;
> + case 0x6:
> + DEBUG ((DEBUG_INFO, "Internal Device Error\n"));
> + break;
> + case 0x7:
> + DEBUG ((DEBUG_INFO, "Command Abort Requested\n"));
> + break;
> + case 0x8:
> + DEBUG ((DEBUG_INFO, "Command Aborted due to SQ
> Deletion\n"));
> + break;
> + case 0x9:
> + DEBUG ((DEBUG_INFO, "Command Aborted due to Failed Fused
> Command\n"));
> + break;
> + case 0xA:
> + DEBUG ((DEBUG_INFO, "Command Aborted due to Missing Fused
> Command\n"));
> + break;
> + case 0xB:
> + DEBUG ((DEBUG_INFO, "Invalid Namespace or Format\n"));
> + break;
> + case 0xC:
> + DEBUG ((DEBUG_INFO, "Command Sequence Error\n"));
> + break;
> + case 0xD:
> + DEBUG ((DEBUG_INFO, "Invalid SGL Last Segment Descriptor\n"));
> + break;
> + case 0xE:
> + DEBUG ((DEBUG_INFO, "Invalid Number of SGL Descriptors\n"));
> + break;
> + case 0xF:
> + DEBUG ((DEBUG_INFO, "Data SGL Length Invalid\n"));
> + break;
> + case 0x10:
> + DEBUG ((DEBUG_INFO, "Metadata SGL Length Invalid\n"));
> + break;
> + case 0x11:
> + DEBUG ((DEBUG_INFO, "SGL Descriptor Type Invalid\n"));
> + break;
> + case 0x80:
> + DEBUG ((DEBUG_INFO, "LBA Out of Range\n"));
> + break;
> + case 0x81:
> + DEBUG ((DEBUG_INFO, "Capacity Exceeded\n"));
> + break;
> + case 0x82:
> + DEBUG ((DEBUG_INFO, "Namespace Not Ready\n"));
> + break;
> + case 0x83:
> + DEBUG ((DEBUG_INFO, "Reservation Conflict\n"));
> + break;
> + }
> + break;
> +
> + case 0x1:
> + switch (Cq->Sc) {
> + case 0x0:
> + DEBUG ((DEBUG_INFO, "Completion Queue Invalid\n"));
> + break;
> + case 0x1:
> + DEBUG ((DEBUG_INFO, "Invalid Queue Identifier\n"));
> + break;
> + case 0x2:
> + DEBUG ((DEBUG_INFO, "Maximum Queue Size Exceeded\n"));
> + break;
> + case 0x3:
> + DEBUG ((DEBUG_INFO, "Abort Command Limit Exceeded\n"));
> + break;
> + case 0x5:
> + DEBUG ((DEBUG_INFO, "Asynchronous Event Request Limit
> Exceeded\n"));
> + break;
> + case 0x6:
> + DEBUG ((DEBUG_INFO, "Invalid Firmware Slot\n"));
> + break;
> + case 0x7:
> + DEBUG ((DEBUG_INFO, "Invalid Firmware Image\n"));
> + break;
> + case 0x8:
> + DEBUG ((DEBUG_INFO, "Invalid Interrupt Vector\n"));
> + break;
> + case 0x9:
> + DEBUG ((DEBUG_INFO, "Invalid Log Page\n"));
> + break;
> + case 0xA:
> + DEBUG ((DEBUG_INFO, "Invalid Format\n"));
> + break;
> + case 0xB:
> + DEBUG ((DEBUG_INFO, "Firmware Application Requires
> Conventional Reset\n"));
> + break;
> + case 0xC:
> + DEBUG ((DEBUG_INFO, "Invalid Queue Deletion\n"));
> + break;
> + case 0xD:
> + DEBUG ((DEBUG_INFO, "Feature Identifier Not Saveable\n"));
> + break;
> + case 0xE:
> + DEBUG ((DEBUG_INFO, "Feature Not Changeable\n"));
> + break;
> + case 0xF:
> + DEBUG ((DEBUG_INFO, "Feature Not Namespace Specific\n"));
> + break;
> + case 0x10:
> + DEBUG ((DEBUG_INFO, "Firmware Application Requires NVM
> Subsystem Reset\n"));
> + break;
> + case 0x80:
> + DEBUG ((DEBUG_INFO, "Conflicting Attributes\n"));
> + break;
> + case 0x81:
> + DEBUG ((DEBUG_INFO, "Invalid Protection Information\n"));
> + break;
> + case 0x82:
> + DEBUG ((DEBUG_INFO, "Attempted Write to Read Only Range\n"));
> + break;
> + }
> + break;
> +
> + case 0x2:
> + switch (Cq->Sc) {
> + case 0x80:
> + DEBUG ((DEBUG_INFO, "Write Fault\n"));
> + break;
> + case 0x81:
> + DEBUG ((DEBUG_INFO, "Unrecovered Read Error\n"));
> + break;
> + case 0x82:
> + DEBUG ((DEBUG_INFO, "End-to-end Guard Check Error\n"));
> + break;
> + case 0x83:
> + DEBUG ((DEBUG_INFO, "End-to-end Application Tag Check
> Error\n"));
> + break;
> + case 0x84:
> + DEBUG ((DEBUG_INFO, "End-to-end Reference Tag Check
> Error\n"));
> + break;
> + case 0x85:
> + DEBUG ((DEBUG_INFO, "Compare Failure\n"));
> + break;
> + case 0x86:
> + DEBUG ((DEBUG_INFO, "Access Denied\n"));
> + break;
> + }
> + break;
> +
> + default:
> + DEBUG ((DEBUG_INFO, "Unknown error\n"));
> + break;
> + }
> +
> + return EFI_DEVICE_ERROR;
> +}
> +
> +/**
> + Create PRP lists for Data transfer which is larger than 2 memory pages.
> + Note here we calcuate the number of required PRP lists and allocate them at
> one time.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] SqId - The SQ index for this PRP
> + @param[in] PhysicalAddr - The physical base address of Data
> Buffer.
> + @param[in] Pages - The number of pages to be
> transfered.
> + @param[out] PrpListHost - The host base address of PRP lists.
> + @param[in,out] PrpListNo - The number of PRP List.
> +
> + @retval The pointer Value to the first PRP List of the PRP lists.
> +
> +**/
> +STATIC
> +UINT64
> +NvmeCreatePrpList (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT16 SqId,
> + IN EFI_PHYSICAL_ADDRESS PhysicalAddr,
> + IN UINTN Pages,
> + OUT VOID **PrpListHost,
> + IN OUT UINTN *PrpListNo
> + )
> +{
> + UINTN PrpEntryNo;
> + UINT64 PrpListBase;
> + UINTN PrpListIndex;
> + UINTN PrpEntryIndex;
> + UINT64 Remainder;
> + EFI_PHYSICAL_ADDRESS PrpListPhyAddr;
> + UINTN Bytes;
> + UINT8 *PrpEntry;
> + EFI_PHYSICAL_ADDRESS NewPhyAddr;
> +
> + ///
> + /// The number of Prp Entry in a memory page.
> + ///
> + PrpEntryNo = EFI_PAGE_SIZE / sizeof (UINT64);
> +
> + ///
> + /// Calculate total PrpList number.
> + ///
> + *PrpListNo = (UINTN) DivU64x64Remainder ((UINT64)Pages,
> (UINT64)PrpEntryNo, &Remainder);
> + if (Remainder != 0) {
> + *PrpListNo += 1;
> + }
> +
> + if (*PrpListNo > NVME_PRP_SIZE) {
> + DEBUG ((DEBUG_INFO, "NvmeCreatePrpList (PhysicalAddr: %lx, Pages: %x)
> PrpEntryNo: %x\n",
> + PhysicalAddr, Pages, PrpEntryNo));
> + DEBUG ((DEBUG_INFO, "*PrpListNo: %x, Remainder: %lx", *PrpListNo,
> Remainder));
> + ASSERT (FALSE);
> + }
> + *PrpListHost = (VOID *)(UINTN) NVME_PRP_BASE (Nvme, SqId);
> +
> + Bytes = EFI_PAGES_TO_SIZE (*PrpListNo);
> + PrpListPhyAddr = (UINT64)(UINTN)(*PrpListHost);
> +
> + ///
> + /// Fill all PRP lists except of last one.
> + ///
> + ZeroMem (*PrpListHost, Bytes);
> + for (PrpListIndex = 0; PrpListIndex < *PrpListNo - 1; ++PrpListIndex) {
> + PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
> +
> + for (PrpEntryIndex = 0; PrpEntryIndex < PrpEntryNo; ++PrpEntryIndex) {
> + PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex *
> sizeof(UINT64));
> + if (PrpEntryIndex != PrpEntryNo - 1) {
> + ///
> + /// Fill all PRP entries except of last one.
> + ///
> + CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof
> (UINT64));
> + PhysicalAddr += EFI_PAGE_SIZE;
> + } else {
> + ///
> + /// Fill last PRP entries with next PRP List pointer.
> + ///
> + NewPhyAddr = (PrpListPhyAddr + (PrpListIndex + 1) *
> EFI_PAGE_SIZE);
> + CopyMem (PrpEntry, (VOID *)(UINTN) (&NewPhyAddr), sizeof
> (UINT64));
> + }
> + }
> + }
> +
> + ///
> + /// Fill last PRP list.
> + ///
> + PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
> + for (PrpEntryIndex = 0; PrpEntryIndex < ((Remainder != 0) ? Remainder :
> PrpEntryNo); ++PrpEntryIndex) {
> + PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex *
> sizeof(UINT64));
> + CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof (UINT64));
> +
> + PhysicalAddr += EFI_PAGE_SIZE;
> + }
> +
> + return PrpListPhyAddr;
> +}
> +
> +/**
> + Check whether there are available command slots.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - Available command slot is found
> + @retval EFI_NOT_READY - No available command slot is found
> + @retval EFI_DEVICE_ERROR - Error occurred on device side.
> +
> +**/
> +EFI_STATUS
> +NvmeHasFreeCmdSlot (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + )
> +{
> + return TRUE;
> +}
> +
> +/**
> + Check whether all command slots are clean.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - All command slots are clean
> + @retval EFI_NOT_READY - Not all command slots are clean
> + @retval EFI_DEVICE_ERROR - Error occurred on device side.
> +
> +**/
> +EFI_STATUS
> +NvmeIsAllCmdSlotClean (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + )
> +{
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Waits until all NVME commands completed.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - All NVME commands have
> completed
> + @retval EFI_TIMEOUT - Timeout occured
> + @retval EFI_NOT_READY - Not all NVME commands have
> completed
> + @retval others - Error occurred on device side.
> +**/
> +EFI_STATUS
> +NvmeWaitAllComplete (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + )
> +{
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Sends an NVM Express Command Packet to an NVM Express controller or
> namespace. This function supports
> + both blocking I/O and nonblocking I/O. The blocking I/O functionality is
> required, and the nonblocking
> + I/O functionality is optional.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] NamespaceId - Is a 32 bit Namespace ID to which
> the Express HCI command packet will be sent.
> + A Value of 0 denotes the NVM
> Express controller, a Value of all 0FFh in the namespace
> + ID specifies that the command
> packet should be sent to all valid namespaces.
> + @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to
> which the Express HCI command packet will be sent.
> + A Value of 0 denotes the NVM
> Express controller, a Value of all 0FFh in the namespace
> + UUID specifies that the command
> packet should be sent to all valid namespaces.
> + @param[in,out] Packet - A pointer to the NVM Express HCI
> Command Packet to send to the NVMe namespace specified
> + by NamespaceId.
> +
> + @retval EFI_SUCCESS - The NVM Express Command Packet
> was sent by the host. TransferLength bytes were transferred
> + to, or from DataBuffer.
> + @retval EFI_NOT_READY - The NVM Express Command Packet
> could not be sent because the controller is not ready. The caller
> + may retry again later.
> + @retval EFI_DEVICE_ERROR - A device error occurred while
> attempting to send the NVM Express Command Packet.
> + @retval EFI_INVALID_PARAMETER - Namespace, or the contents of
> NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
> + Express Command Packet was not
> sent, so no additional status information is available.
> + @retval EFI_UNSUPPORTED - The command described by the
> NVM Express Command Packet is not supported by the host adapter.
> + The NVM Express Command
> Packet was not sent, so no additional status information is available.
> + @retval EFI_TIMEOUT - A timeout occurred while waiting
> for the NVM Express Command Packet to execute.
> +
> +**/
> +EFI_STATUS
> +NvmePassThru (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT32 NamespaceId,
> + IN UINT64 NamespaceUuid,
> + IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
> + )
> +{
> + EFI_STATUS Status;
> + NVME_SQ *Sq;
> + NVME_CQ *Cq;
> + UINT8 Qid;
> + UINT32 Bytes;
> + UINT32 Offset;
> + EFI_PHYSICAL_ADDRESS PhyAddr;
> + VOID *PrpListHost;
> + UINTN PrpListNo;
> + UINT32 Timer;
> + UINTN SqSize;
> + UINTN CqSize;
> +
> + ///
> + /// check the Data fields in Packet parameter.
> + ///
> + if ((Nvme == NULL) || (Packet == NULL)) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter:
> Nvme(%x)/Packet(%x)\n",
> + (UINTN)Nvme, (UINTN)Packet));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if ((Packet->NvmeCmd == NULL) || (Packet->NvmeResponse == NULL)) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter:
> NvmeCmd(%x)/NvmeResponse(%x)\n",
> + (UINTN)Packet->NvmeCmd, (UINTN)Packet->NvmeResponse));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if (Packet->QueueId != NVME_ADMIN_QUEUE && Packet->QueueId !=
> NVME_IO_QUEUE) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter:
> QueueId(%x)\n",
> + Packet->QueueId));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + PrpListHost = NULL;
> + PrpListNo = 0;
> + Status = EFI_SUCCESS;
> +
> + Qid = Packet->QueueId;
> + Sq = Nvme->SqBuffer[Qid] + Nvme->SqTdbl[Qid].Sqt;
> + Cq = Nvme->CqBuffer[Qid] + Nvme->CqHdbl[Qid].Cqh;
> + if (Qid == NVME_ADMIN_QUEUE) {
> + SqSize = NVME_ASQ_SIZE + 1;
> + CqSize = NVME_ACQ_SIZE + 1;
> + } else {
> + SqSize = NVME_CSQ_DEPTH;
> + CqSize = NVME_CCQ_DEPTH;
> + }
> +
> + if (Packet->NvmeCmd->Nsid != NamespaceId) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru: Nsid mismatch (%x, %x)\n",
> + Packet->NvmeCmd->Nsid, NamespaceId));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + ZeroMem (Sq, sizeof (NVME_SQ));
> + Sq->Opc = Packet->NvmeCmd->Cdw0.Opcode;
> + Sq->Fuse = Packet->NvmeCmd->Cdw0.FusedOperation;
> + Sq->Cid = Packet->NvmeCmd->Cdw0.Cid;
> + Sq->Nsid = Packet->NvmeCmd->Nsid;
> +
> + ///
> + /// Currently we only support PRP for Data transfer, SGL is NOT supported.
> + ///
> + ASSERT (Sq->Psdt == 0);
> + if (Sq->Psdt != 0) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru: doesn't support SGL
> mechanism\n"));
> + return EFI_UNSUPPORTED;
> + }
> +
> + Sq->Prp[0] = Packet->TransferBuffer;
> + Sq->Prp[1] = 0;
> +
> + if(Packet->MetadataBuffer != (UINT64)(UINTN)NULL) {
> + Sq->Mptr = Packet->MetadataBuffer;
> + }
> +
> + ///
> + /// If the Buffer Size spans more than two memory pages (page Size as
> defined in CC.Mps),
> + /// then build a PRP list in the second PRP submission queue entry.
> + ///
> + Offset = ((UINT32)Sq->Prp[0]) & (EFI_PAGE_SIZE - 1);
> + Bytes = Packet->TransferLength;
> +
> + if ((Offset + Bytes) > (EFI_PAGE_SIZE * 2)) {
> + ///
> + /// Create PrpList for remaining Data Buffer.
> + ///
> + PhyAddr = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
> + Sq->Prp[1] = NvmeCreatePrpList (Nvme, Nvme->SqTdbl[Qid].Sqt, PhyAddr,
> EFI_SIZE_TO_PAGES(Offset + Bytes) - 1, &PrpListHost, &PrpListNo);
> + if (Sq->Prp[1] == 0) {
> + Status = EFI_OUT_OF_RESOURCES;
> + DEBUG ((DEBUG_ERROR, "NvmeCreatePrpList fail, Status: %r\n",
> Status));
> + goto EXIT;
> + }
> +
> + } else if ((Offset + Bytes) > EFI_PAGE_SIZE) {
> + Sq->Prp[1] = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
> + }
> +
> + if(Packet->NvmeCmd->Flags & CDW10_VALID) {
> + Sq->Payload.Raw.Cdw10 = Packet->NvmeCmd->Cdw10;
> + }
> + if(Packet->NvmeCmd->Flags & CDW11_VALID) {
> + Sq->Payload.Raw.Cdw11 = Packet->NvmeCmd->Cdw11;
> + }
> + if(Packet->NvmeCmd->Flags & CDW12_VALID) {
> + Sq->Payload.Raw.Cdw12 = Packet->NvmeCmd->Cdw12;
> + }
> + if(Packet->NvmeCmd->Flags & CDW13_VALID) {
> + Sq->Payload.Raw.Cdw13 = Packet->NvmeCmd->Cdw13;
> + }
> + if(Packet->NvmeCmd->Flags & CDW14_VALID) {
> + Sq->Payload.Raw.Cdw14 = Packet->NvmeCmd->Cdw14;
> + }
> + if(Packet->NvmeCmd->Flags & CDW15_VALID) {
> + Sq->Payload.Raw.Cdw15 = Packet->NvmeCmd->Cdw15;
> + }
> +
> + ///
> + /// Ring the submission queue doorbell.
> + ///
> + Nvme->SqTdbl[Qid].Sqt++;
> + if(Nvme->SqTdbl[Qid].Sqt == SqSize) {
> + Nvme->SqTdbl[Qid].Sqt = 0;
> + }
> + Status = NVME_SET_SQTDBL (Nvme, Qid, &Nvme->SqTdbl[Qid]);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_SET_SQTDBL fail, Status: %r\n",
> Status));
> + goto EXIT;
> + }
> +
> + ///
> + /// Wait for completion queue to get filled in.
> + ///
> + Status = EFI_TIMEOUT;
> + Timer = 0;
> + while (Timer < NVME_CMD_TIMEOUT) {
> + //DEBUG ((DEBUG_VERBOSE, "Timer: %x, Cq:\n", Timer));
> + //DumpMem (Cq, sizeof (NVME_CQ));
> + if (Cq->Pt != Nvme->Pt[Qid]) {
> + Status = EFI_SUCCESS;
> + break;
> + }
> +
> + MicroSecondDelay (NVME_CMD_WAIT);
> + Timer += NVME_CMD_WAIT;
> + }
> +
> + Nvme->CqHdbl[Qid].Cqh++;
> + if (Nvme->CqHdbl[Qid].Cqh == CqSize) {
> + Nvme->CqHdbl[Qid].Cqh = 0;
> + Nvme->Pt[Qid] ^= 1;
> + }
> +
> + ///
> + /// Copy the Respose Queue entry for this command to the callers response
> Buffer
> + ///
> + CopyMem (Packet->NvmeResponse, Cq, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + if (!EFI_ERROR(Status)) { // We still need to check CQ status if no timeout
> error occured
> + Status = NvmeCheckCqStatus (Cq);
> + }
> + NVME_SET_CQHDBL (Nvme, Qid, &Nvme->CqHdbl[Qid]);
> +
> +EXIT:
> + return Status;
> +}
> +
> +/**
> + Get identify controller Data.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer used to store the identify
> controller Data.
> +
> + @return EFI_SUCCESS - Successfully get the identify
> controller Data.
> + @return others - Fail to get the identify controller
> Data.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeIdentifyController (
> + IN NVME_CONTEXT *Nvme,
> + IN VOID *Buffer
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + //
> + // According to Nvm Express 1.1 spec Figure 38, When not used, the field
> shall be cleared to 0h.
> + // For the Identify command, the Namespace Identifier is only used for the
> Namespace Data structure.
> + //
> + Command.Nsid = 0;
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> + CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
> + CommandPacket.TransferLength = sizeof
> (NVME_ADMIN_CONTROLLER_DATA);
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> + //
> + // Set bit 0 (Cns bit) to 1 to identify a controller
> + //
> + Command.Cdw10 = 1;
> + Command.Flags = CDW10_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Get specified identify namespace Data.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] NamespaceId - The specified namespace identifier.
> + @param[in] Buffer - The Buffer used to store the identify
> namespace Data.
> +
> + @return EFI_SUCCESS - Successfully get the identify
> namespace Data.
> + @return others - Fail to get the identify namespace
> Data.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeIdentifyNamespace (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT32 NamespaceId,
> + IN VOID *Buffer
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + Command.Nsid = NamespaceId;
> + CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
> + CommandPacket.TransferLength = sizeof
> (NVME_ADMIN_NAMESPACE_DATA);
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> + //
> + // Set bit 0 (Cns bit) to 1 to identify a namespace
> + //
> + CommandPacket.NvmeCmd->Cdw10 = 0;
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NamespaceId,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Get Block Size for specific namespace of NVME.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return - Block Size in bytes
> +
> +**/
> +STATIC
> +UINT32
> +NvmeGetBlockSize (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + UINT32 BlockSize;
> + UINT32 Lbads;
> + UINT32 Flbas;
> + UINT32 LbaFmtIdx;
> +
> + Flbas = Nvme->NamespaceData->Flbas;
> + LbaFmtIdx = Flbas & 3;
> + Lbads = Nvme->NamespaceData->LbaFormat[LbaFmtIdx].Lbads;
> +
> + BlockSize = (UINT32)1 << Lbads;
> + return BlockSize;
> +}
> +
> +/**
> + Get last LBA for specific namespace of NVME.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return - Last LBA address
> +
> +**/
> +STATIC
> +EFI_LBA
> +NvmeGetLastLba (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + EFI_LBA LastBlock;
> + LastBlock = Nvme->NamespaceData->Nsze - 1;
> + return LastBlock;
> +}
> +
> +/**
> + Create io completion queue.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully create io completion
> queue.
> + @return others - Fail to create io completion queue.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeCreateIoCompletionQueue (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_CRIOCQ CrIoCq;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&CrIoCq, sizeof(NVME_ADMIN_CRIOCQ));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_CRIOCQ_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer =
> (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
> + CommandPacket.TransferLength = EFI_PAGE_SIZE;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + CrIoCq.Qid = NVME_IO_QUEUE;
> + CrIoCq.Qsize = NVME_CCQ_SIZE;
> + CrIoCq.Pc = 1;
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoCq, sizeof
> (NVME_ADMIN_CRIOCQ));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Create io submission queue.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully create io submission
> queue.
> + @return others - Fail to create io submission queue.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeCreateIoSubmissionQueue (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_CRIOSQ CrIoSq;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&CrIoSq, sizeof(NVME_ADMIN_CRIOSQ));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_CRIOSQ_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer =
> (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
> + CommandPacket.TransferLength = EFI_PAGE_SIZE;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + CrIoSq.Qid = NVME_IO_QUEUE;
> + CrIoSq.Qsize = NVME_CSQ_SIZE;
> + CrIoSq.Pc = 1;
> + CrIoSq.Cqid = NVME_IO_QUEUE;
> + CrIoSq.Qprio = 0;
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoSq, sizeof
> (NVME_ADMIN_CRIOSQ));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Security send and receive commands.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] SendCommand - The flag to indicate the
> command type, TRUE for Send command and FALSE for receive command
> + @param[in] SecurityProtocol - Security Protocol
> + @param[in] SpSpecific - Security Protocol Specific
> + @param[in] TransferLength - Transfer Length of Buffer (in
> bytes) - always a multiple of 512
> + @param[in,out] TransferBuffer - Address of Data to transfer
> +
> + @return EFI_SUCCESS - Successfully create io submission
> queue.
> + @return others - Fail to send/receive commands.
> +
> +**/
> +EFI_STATUS
> +NvmeSecuritySendReceive (
> + IN NVME_CONTEXT *Nvme,
> + IN BOOLEAN SendCommand,
> + IN UINT8 SecurityProtocol,
> + IN UINT16 SpSpecific,
> + IN UINTN TransferLength,
> + IN OUT VOID *TransferBuffer
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_SECSEND SecSend;
> + OACS *Oacs;
> + UINT8 Opcode;
> + VOID* *SecBuff;
> +
> + Oacs = (OACS *)&Nvme->ControllerData->Oacs;
> +
> + //
> + // Verify security bit for Security Send/Receive commands
> + //
> + if (Oacs->Security == 0) {
> + DEBUG ((DEBUG_ERROR, "Security command doesn't support.\n"));
> + return EFI_NOT_READY;
> + }
> +
> + SecBuff = (VOID *)(UINTN) NVME_SEC_BASE (Nvme);
> +
> + //
> + // Actions for sending security command
> + //
> + if (SendCommand) {
> + CopyMem (SecBuff, TransferBuffer, TransferLength);
> + }
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&SecSend, sizeof(NVME_ADMIN_SECSEND));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Opcode = (UINT8)(SendCommand ? NVME_ADMIN_SECURITY_SEND_OPC :
> NVME_ADMIN_SECURITY_RECV_OPC);
> + Command.Cdw0.Opcode = Opcode;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer = (UINT64)(UINTN)SecBuff;
> + CommandPacket.TransferLength = (UINT32)TransferLength;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + SecSend.Spsp = SpSpecific;
> + SecSend.Secp = SecurityProtocol;
> + SecSend.Tl = (UINT32)TransferLength;
> +
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &SecSend, sizeof
> (NVME_ADMIN_SECSEND));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + //
> + // Actions for receiving security command
> + //
> + if (!SendCommand) {
> + CopyMem (TransferBuffer, SecBuff, TransferLength);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Destroy io completion queue.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully destroy io completion
> queue.
> + @return others - Fail to destroy io completion queue.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeDestroyIoCompletionQueue (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_DEIOCQ DelIoCq;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&DelIoCq, sizeof(NVME_ADMIN_DEIOCQ));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_DELIOCQ_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer =
> (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
> + CommandPacket.TransferLength = EFI_PAGE_SIZE;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + DelIoCq.Qid = NVME_IO_QUEUE;
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoCq, sizeof
> (NVME_ADMIN_DEIOCQ));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Destroy io submission queue.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully destroy io submission
> queue.
> + @return others - Fail to destroy io submission queue.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeDestroyIoSubmissionQueue (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_DEIOSQ DelIoSq;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&DelIoSq, sizeof(NVME_ADMIN_DEIOSQ));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_DELIOSQ_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer =
> (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
> + CommandPacket.TransferLength = EFI_PAGE_SIZE;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + DelIoSq.Qid = NVME_IO_QUEUE;
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoSq, sizeof
> (NVME_ADMIN_DEIOSQ));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Allocate transfer-related Data struct which is used at Nvme.
> +
> + @param[in, out] Nvme The pointer to the NVME_CONTEXT Data
> structure.
> +
> + @retval EFI_OUT_OF_RESOURCE No enough resource.
> + @retval EFI_SUCCESS Successful to allocate resource.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NvmeAllocateResource (
> + IN OUT NVME_CONTEXT *Nvme
> + )
> +{
> + EFI_STATUS Status;
> + EFI_PHYSICAL_ADDRESS DeviceAddress;
> + VOID *Base;
> + VOID *Mapping;
> +
> + //
> + // Allocate resources for DMA.
> + //
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + Nvme->BaseMemMapping = Mapping;
> + Nvme->BaseMem = Base;
> + ZeroMem (Nvme->BaseMem, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES
> (NVME_MEM_MAX_SIZE));
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "%a() NvmeContext 0x%x\n",
> + __FUNCTION__,
> + Nvme->BaseMem
> + ));
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Free allocated transfer-related Data struct which is used at NVMe.
> +
> + @param[in, out] Nvme The pointer to the NVME_CONTEXT Data
> structure.
> +
> +**/
> +VOID
> +EFIAPI
> +NvmeFreeResource (
> + IN OUT NVME_CONTEXT *Nvme
> + )
> +{
> + if (Nvme->BaseMem != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE),
> + Nvme->BaseMem,
> + Nvme->BaseMemMapping
> + );
> + Nvme->BaseMem = NULL;
> + }
> +}
> +
> +/**
> + Initialize the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - The NVM Express Controller is
> initialized successfully.
> + @retval Others - A device error occurred while
> initializing the controller.
> +
> +**/
> +EFI_STATUS
> +NvmeControllerInit (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + EFI_STATUS Status;
> + NVME_AQA Aqa;
> + NVME_ASQ Asq;
> + NVME_ACQ Acq;
> + NVME_VER Ver;
> +
> + UINT32 MlBAR;
> + UINT32 MuBAR;
> +
> + ///
> + /// Update PCIE BAR0/1 for NVME device
> + ///
> + MlBAR = Nvme->Nbar;
> + MuBAR = 0;
> + PciWrite32 (Nvme->PciBase + 0x10, MlBAR); // MLBAR (BAR0)
> + PciWrite32 (Nvme->PciBase + 0x14, MuBAR); // MUBAR (BAR1)
> +
> + ///
> + /// Enable PCIE decode
> + ///
> + PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x6);
> +
> + // Version
> + NVME_GET_VER (Nvme, &Ver);
> + if (!(Ver.Mjr == 0x0001) && (Ver.Mnr == 0x0000)) {
> + DEBUG ((DEBUG_INFO, "\n!!!\n!!! NVME Version mismatch for the
> implementation !!!\n!!!\n"));
> + }
> +
> + ///
> + /// Read the Controller Capabilities register and verify that the NVM
> command set is supported
> + ///
> + Status = NVME_GET_CAP (Nvme, &Nvme->Cap);
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CAP fail, Status: %r\n", Status));
> + goto Done;
> + }
> +
> + if (Nvme->Cap.Css != 0x01) {
> + DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: the controller doesn't
> support NVMe command set\n"));
> + Status = EFI_UNSUPPORTED;
> + goto Done;
> + }
> +
> + ///
> + /// Currently the driver only supports 4k page Size.
> + ///
> + if ((Nvme->Cap.Mpsmin + 12) > EFI_PAGE_SHIFT) {
> + DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: only supports 4k page
> Size\n"));
> + ASSERT (FALSE);
> + Status = EFI_UNSUPPORTED;
> + goto Done;
> + }
> +
> + Nvme->Cid[0] = 0;
> + Nvme->Cid[1] = 0;
> +
> + Nvme->Pt[0] = 0;
> + Nvme->Pt[1] = 0;
> +
> + ZeroMem ((VOID *)(UINTN)(&(Nvme->SqTdbl[0])), sizeof (NVME_SQTDBL) *
> NVME_MAX_IO_QUEUES);
> + ZeroMem ((VOID *)(UINTN)(&(Nvme->CqHdbl[0])), sizeof (NVME_CQHDBL)
> * NVME_MAX_IO_QUEUES);
> +
> + ZeroMem (Nvme->BaseMem, NVME_MEM_MAX_SIZE);
> +
> + Status = NvmeDisableController (Nvme);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeDisableController fail, Status: %r\n",
> Status));
> + goto Done;
> + }
> +
> + ///
> + /// set number of entries admin submission & completion queues.
> + ///
> + Aqa.Asqs = NVME_ASQ_SIZE;
> + Aqa.Rsvd1 = 0;
> + Aqa.Acqs = NVME_ACQ_SIZE;
> + Aqa.Rsvd2 = 0;
> +
> + ///
> + /// Address of admin submission queue.
> + ///
> + Asq = (UINT64)(UINTN)(NVME_ASQ_BASE (Nvme) & ~0xFFF);
> +
> + ///
> + /// Address of admin completion queue.
> + ///
> + Acq = (UINT64)(UINTN)(NVME_ACQ_BASE (Nvme) & ~0xFFF);
> +
> + ///
> + /// Address of I/O submission & completion queue.
> + ///
> + Nvme->SqBuffer[0] = (NVME_SQ *)(UINTN)NVME_ASQ_BASE (Nvme); //
> NVME_ADMIN_QUEUE
> + Nvme->CqBuffer[0] = (NVME_CQ *)(UINTN)NVME_ACQ_BASE (Nvme); //
> NVME_ADMIN_QUEUE
> + Nvme->SqBuffer[1] = (NVME_SQ *)(UINTN)NVME_SQ_BASE (Nvme, 0); //
> NVME_IO_QUEUE
> + Nvme->CqBuffer[1] = (NVME_CQ *)(UINTN)NVME_CQ_BASE (Nvme, 0); //
> NVME_IO_QUEUE
> +
> + DEBUG ((DEBUG_INFO, "Admin Submission Queue Size (Aqa.Asqs) =
> [%08X]\n", Aqa.Asqs));
> + DEBUG ((DEBUG_INFO, "Admin Completion Queue Size (Aqa.Acqs) =
> [%08X]\n", Aqa.Acqs));
> + DEBUG ((DEBUG_INFO, "Admin Submission Queue (SqBuffer[0]) =
> [%08X]\n", Nvme->SqBuffer[0]));
> + DEBUG ((DEBUG_INFO, "Admin Completion Queue (CqBuffer[0]) =
> [%08X]\n", Nvme->CqBuffer[0]));
> + DEBUG ((DEBUG_INFO, "I/O Submission Queue (SqBuffer[1]) =
> [%08X]\n", Nvme->SqBuffer[1]));
> + DEBUG ((DEBUG_INFO, "I/O Completion Queue (CqBuffer[1]) =
> [%08X]\n", Nvme->CqBuffer[1]));
> +
> + ///
> + /// Program admin queue attributes.
> + ///
> + Status = NVME_SET_AQA (Nvme, &Aqa);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Program admin submission queue address.
> + ///
> + Status = NVME_SET_ASQ (Nvme, &Asq);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Program admin completion queue address.
> + ///
> + Status = NVME_SET_ACQ (Nvme, &Acq);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + Status = NvmeEnableController (Nvme);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Create one I/O completion queue.
> + ///
> + Status = NvmeCreateIoCompletionQueue (Nvme);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Create one I/O Submission queue.
> + ///
> + Status = NvmeCreateIoSubmissionQueue (Nvme);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Get current Identify Controller Data
> + ///
> + Nvme->ControllerData = (NVME_ADMIN_CONTROLLER_DATA *)(UINTN)
> NVME_CONTROL_DATA_BASE (Nvme);
> + Status = NvmeIdentifyController (Nvme, Nvme->ControllerData);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Dump NvmExpress Identify Controller Data
> + ///
> + Nvme->ControllerData->Sn[19] = 0;
> + Nvme->ControllerData->Mn[39] = 0;
> + //NvmeDumpIdentifyController (Nvme->ControllerData);
> +
> + ///
> + /// Get current Identify Namespace Data
> + ///
> + Nvme->NamespaceData = (NVME_ADMIN_NAMESPACE_DATA
> *)NVME_NAMESPACE_DATA_BASE (Nvme);
> + Status = NvmeIdentifyNamespace (Nvme, Nvme->Nsid,
> Nvme->NamespaceData);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeIdentifyNamespace fail, Status = %r\n",
> Status));
> + goto Done;
> + }
> +
> + ///
> + /// Dump NvmExpress Identify Namespace Data
> + ///
> + if (Nvme->NamespaceData->Ncap == 0) {
> + DEBUG ((DEBUG_ERROR, "Invalid Namespace, Ncap: %lx\n",
> Nvme->NamespaceData->Ncap));
> + Status = EFI_DEVICE_ERROR;
> + goto Done;
> + }
> +
> + Nvme->BlockSize = NvmeGetBlockSize (Nvme);
> + Nvme->LastBlock = NvmeGetLastLba (Nvme);
> +
> + Nvme->State = NvmeStatusInit;
> +
> + return EFI_SUCCESS;
> +
> +Done:
> + return Status;
> +}
> +
> +/**
> + Un-initialize the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - The NVM Express Controller is
> un-initialized successfully.
> + @retval Others - A device error occurred while
> un-initializing the controller.
> +
> +**/
> +EFI_STATUS
> +NvmeControllerExit (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + EFI_STATUS Status;
> +
> + Status = EFI_SUCCESS;
> + if (Nvme->State == NvmeStatusInit || Nvme->State == NvmeStatusMax) {
> + ///
> + /// Destroy I/O Submission queue.
> + ///
> + Status = NvmeDestroyIoSubmissionQueue (Nvme);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeDestroyIoSubmissionQueue fail, Status
> = %r\n", Status));
> + return Status;
> + }
> +
> + ///
> + /// Destroy I/O completion queue.
> + ///
> + Status = NvmeDestroyIoCompletionQueue (Nvme);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeDestroyIoCompletionQueue fail, Status
> = %r\n", Status));
> + return Status;
> + }
> +
> + Status = NvmeShutdownController (Nvme);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeShutdownController fail, Status: %r\n",
> Status));
> + }
> + }
> +
> + ///
> + /// Disable PCIE decode
> + ///
> + PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x0);
> + PciWrite32 (Nvme->PciBase + 0x10, 0); // MLBAR (BAR0)
> + PciWrite32 (Nvme->PciBase + 0x14, 0); // MUBAR (BAR1)
> +
> + Nvme->State = NvmeStatusUnknown;
> + return Status;
> +}
> +
> +/**
> + Read sector Data from the NVMe device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in,out] Buffer - The Buffer used to store the Data
> read from the device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be read.
> +
> + @retval EFI_SUCCESS - Datum are read from the device.
> + @retval Others - Fail to read all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeReadSectors (
> + IN NVME_CONTEXT *Nvme,
> + IN OUT UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINT32 Blocks
> + )
> +{
> + UINT32 Bytes;
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + UINT32 BlockSize;
> +
> + BlockSize = Nvme->BlockSize;
> + Bytes = Blocks * BlockSize;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_READ_OPC;
> + CommandPacket.NvmeCmd->Cdw0.Cid =
> Nvme->Cid[NVME_IO_QUEUE]++;
> + CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
> + CommandPacket.TransferBuffer = Buffer;
> +
> + CommandPacket.TransferLength = Bytes;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_IO_QUEUE;
> +
> + CommandPacket.NvmeCmd->Cdw10 = (UINT32)Lba;
> + CommandPacket.NvmeCmd->Cdw11 = (UINT32)(RShiftU64 (Lba, 32));
> + CommandPacket.NvmeCmd->Cdw12 = (Blocks - 1) & 0xFFFF;
> +
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID |
> CDW12_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + Nvme->Nsid,
> + 0,
> + &CommandPacket
> + );
> +
> + return Status;
> +}
> +
> +/**
> + Write sector Data to the NVMe device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer to be written into the
> device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be written.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeWriteSectors (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINT32 Blocks
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + UINT32 Bytes;
> + UINT32 BlockSize;
> +
> + BlockSize = Nvme->BlockSize;
> + Bytes = Blocks * BlockSize;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_WRITE_OPC;
> + CommandPacket.NvmeCmd->Cdw0.Cid =
> Nvme->Cid[NVME_IO_QUEUE]++;
> + CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
> + CommandPacket.TransferBuffer = Buffer;
> +
> + CommandPacket.TransferLength = Bytes;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_IO_QUEUE;
> +
> + CommandPacket.NvmeCmd->Cdw10 = (UINT32)Lba;
> + CommandPacket.NvmeCmd->Cdw11 = (UINT32)(RShiftU64 (Lba, 32));
> + CommandPacket.NvmeCmd->Cdw12 = (Blocks - 1) & 0xFFFF;
> +
> + CommandPacket.MetadataBuffer = (UINT64)(UINTN)NULL;
> + CommandPacket.MetadataLength = 0;
> +
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID |
> CDW12_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + Nvme->Nsid,
> + 0,
> + &CommandPacket
> + );
> +
> + return Status;
> +}
> +
> +/**
> + Flushes all modified Data to the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeFlush (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_FLUSH_OPC;
> + CommandPacket.NvmeCmd->Cdw0.Cid =
> Nvme->Cid[NVME_IO_QUEUE]++;
> + CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_IO_QUEUE;
> +
> + Status = NvmePassThru (
> + Nvme,
> + Nvme->Nsid,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Read some blocks from the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[out] Buffer - The Buffer used to store the Data
> read from the device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be read.
> +
> + @retval EFI_SUCCESS - Datum are read from the device.
> + @retval Others - Fail to read all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeRead (
> + IN NVME_CONTEXT *Nvme,
> + OUT UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINTN Blocks
> + )
> +{
> + EFI_STATUS Status;
> + UINT32 BlockSize;
> + UINT32 MaxTransferBlocks;
> +
> + ASSERT (Blocks <= NVME_MAX_SECTORS);
> + Status = EFI_SUCCESS;
> + BlockSize = Nvme->BlockSize;
> + if (Nvme->ControllerData->Mdts != 0) {
> + MaxTransferBlocks = (1 << (Nvme->ControllerData->Mdts)) * (1 <<
> (Nvme->Cap.Mpsmin + 12)) / BlockSize;
> + } else {
> + MaxTransferBlocks = 1024;
> + }
> +
> + while (Blocks > 0) {
> + if (Blocks > MaxTransferBlocks) {
> + Status = NvmeReadSectors (Nvme, Buffer, Lba, MaxTransferBlocks);
> +
> + Blocks -= MaxTransferBlocks;
> + Buffer += (MaxTransferBlocks * BlockSize);
> + Lba += MaxTransferBlocks;
> + } else {
> + Status = NvmeReadSectors (Nvme, Buffer, Lba, (UINT32) Blocks);
> + Blocks = 0;
> + }
> +
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeRead fail, Status = %r\n", Status));
> + break;
> + }
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Write some blocks to the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer to be written into the
> device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be written.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeWrite (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINTN Blocks
> + )
> +{
> + EFI_STATUS Status;
> + UINT32 BlockSize;
> + UINT32 MaxTransferBlocks;
> +
> + ASSERT (Blocks <= NVME_MAX_SECTORS);
> + Status = EFI_SUCCESS;
> + BlockSize = Nvme->BlockSize;
> +
> + if (Nvme->ControllerData->Mdts != 0) {
> + MaxTransferBlocks = (1 << (Nvme->ControllerData->Mdts)) * (1 <<
> (Nvme->Cap.Mpsmin + 12)) / BlockSize;
> + } else {
> + MaxTransferBlocks = 1024;
> + }
> +
> + while (Blocks > 0) {
> + if (Blocks > MaxTransferBlocks) {
> + Status = NvmeWriteSectors (Nvme, Buffer, Lba, MaxTransferBlocks);
> +
> + Blocks -= MaxTransferBlocks;
> + Buffer += (MaxTransferBlocks * BlockSize);
> + Lba += MaxTransferBlocks;
> + } else {
> + Status = NvmeWriteSectors (Nvme, Buffer, Lba, (UINT32) Blocks);
> + Blocks = 0;
> + }
> +
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeWrite fail, Status = %r\n", Status));
> + break;
> + }
> + }
> +
> + return Status;
> +}
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
> new file mode 100644
> index 000000000000..3fef3dbc1c0d
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
> @@ -0,0 +1,455 @@
> +/** @file
> + Header file for NVMe function definitions
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef __OPAL_PASSWORD_NVME_MODE_H__
> +#define __OPAL_PASSWORD_NVME_MODE_H__
> +
> +
> +#include "OpalNvmeReg.h"
> +
> +#define NVME_MAX_SECTORS 0x10000
> +//
> +// QueueId
> +//
> +#define NVME_ADMIN_QUEUE 0x00
> +#define NVME_IO_QUEUE 0x01
> +
> +typedef struct {
> + UINT8 Opcode;
> + UINT8 FusedOperation;
> + #define NORMAL_CMD 0x00
> + #define FUSED_FIRST_CMD 0x01
> + #define FUSED_SECOND_CMD 0x02
> + UINT16 Cid;
> +} NVME_CDW0;
> +
> +typedef struct {
> + NVME_CDW0 Cdw0;
> + UINT8 Flags;
> + #define CDW10_VALID 0x01
> + #define CDW11_VALID 0x02
> + #define CDW12_VALID 0x04
> + #define CDW13_VALID 0x08
> + #define CDW14_VALID 0x10
> + #define CDW15_VALID 0x20
> + UINT32 Nsid;
> + UINT32 Cdw10;
> + UINT32 Cdw11;
> + UINT32 Cdw12;
> + UINT32 Cdw13;
> + UINT32 Cdw14;
> + UINT32 Cdw15;
> +} NVM_EXPRESS_COMMAND;
> +
> +typedef struct {
> + UINT32 Cdw0;
> + UINT32 Cdw1;
> + UINT32 Cdw2;
> + UINT32 Cdw3;
> +} NVM_EXPRESS_RESPONSE;
> +
> +typedef struct {
> + UINT64 CommandTimeout;
> + UINT64 TransferBuffer;
> + UINT32 TransferLength;
> + UINT64 MetadataBuffer;
> + UINT32 MetadataLength;
> + UINT8 QueueId;
> + NVM_EXPRESS_COMMAND *NvmeCmd;
> + NVM_EXPRESS_RESPONSE *NvmeResponse;
> +} NVM_EXPRESS_PASS_THRU_COMMAND_PACKET;
> +
> +
> +#pragma pack(1)
> +
> +// Internal fields
> +typedef enum {
> + NvmeStatusUnknown,
> + NvmeStatusInit,
> + NvmeStatusInuse,
> + NvmeStatusMax,
> +} NVME_STATUS;
> +
> +typedef struct {
> + UINT32 Nbar;
> + VOID *BaseMem;
> + VOID *BaseMemMapping;
> + BOOLEAN PollCancellation;
> + UINT16 NvmeInitWaitTime;
> +
> + NVME_STATUS State;
> + UINT8 BusID;
> + UINT8 DeviceID;
> + UINT8 FuncID;
> + UINTN PciBase;
> +
> + UINT32 Nsid;
> + UINT64 Nsuuid;
> + UINT32 BlockSize;
> + EFI_LBA LastBlock;
> +
> + //
> + // Pointers to 4kB aligned submission & completion queues.
> + //
> + NVME_SQ
> *SqBuffer[NVME_MAX_IO_QUEUES];
> + NVME_CQ
> *CqBuffer[NVME_MAX_IO_QUEUES];
> + UINT16 Cid[NVME_MAX_IO_QUEUES];
> +
> + //
> + // Submission and completion queue indices.
> + //
> + NVME_SQTDBL
> SqTdbl[NVME_MAX_IO_QUEUES];
> + NVME_CQHDBL
> CqHdbl[NVME_MAX_IO_QUEUES];
> + UINT8 Pt[NVME_MAX_IO_QUEUES];
> +
> + UINTN
> SqeCount[NVME_MAX_IO_QUEUES];
> +
> + //
> + // Nvme controller capabilities
> + //
> + NVME_CAP Cap;
> +
> + //
> + // pointer to identify controller Data
> + //
> + NVME_ADMIN_CONTROLLER_DATA *ControllerData;
> + NVME_ADMIN_NAMESPACE_DATA *NamespaceData;
> +} NVME_CONTEXT;
> +
> +#pragma pack()
> +
> +/**
> + Transfer MMIO Data to memory.
> +
> + @param[in,out] MemBuffer - Destination: Memory address
> + @param[in] MmioAddr - Source: MMIO address
> + @param[in] Size - Size for read
> +
> + @retval EFI_SUCCESS - MMIO read sucessfully
> +**/
> +EFI_STATUS
> +NvmeMmioRead (
> + IN OUT VOID *MemBuffer,
> + IN UINTN MmioAddr,
> + IN UINTN Size
> + );
> +
> +/**
> + Transfer memory Data to MMIO.
> +
> + @param[in,out] MmioAddr - Destination: MMIO address
> + @param[in] MemBuffer - Source: Memory address
> + @param[in] Size - Size for write
> +
> + @retval EFI_SUCCESS - MMIO write sucessfully
> +**/
> +EFI_STATUS
> +NvmeMmioWrite (
> + IN OUT UINTN MmioAddr,
> + IN VOID *MemBuffer,
> + IN UINTN Size
> + );
> +
> +/**
> + Transfer memory data to MMIO.
> +
> + @param[in,out] MmioAddr - Destination: MMIO address
> + @param[in] MemBuffer - Source: Memory address
> + @param[in] Size - Size for write
> +
> + @retval EFI_SUCCESS - MMIO write sucessfully
> +**/
> +EFI_STATUS
> +OpalPciWrite (
> + IN OUT UINTN MmioAddr,
> + IN VOID *MemBuffer,
> + IN UINTN Size
> + );
> +
> +/**
> + Transfer MMIO data to memory.
> +
> + @param[in,out] MemBuffer - Destination: Memory address
> + @param[in] MmioAddr - Source: MMIO address
> + @param[in] Size - Size for read
> +
> + @retval EFI_SUCCESS - MMIO read sucessfully
> +**/
> +EFI_STATUS
> +OpalPciRead (
> + IN OUT VOID *MemBuffer,
> + IN UINTN MmioAddr,
> + IN UINTN Size
> + );
> +
> +/**
> + Allocate transfer-related Data struct which is used at Nvme.
> +
> + @param[in, out] Nvme The pointer to the NVME_CONTEXT Data
> structure.
> +
> + @retval EFI_OUT_OF_RESOURCE No enough resource.
> + @retval EFI_SUCCESS Successful to allocate resource.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NvmeAllocateResource (
> + IN OUT NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Free allocated transfer-related Data struct which is used at NVMe.
> +
> + @param[in, out] Nvme The pointer to the NVME_CONTEXT Data
> structure.
> +
> +**/
> +VOID
> +EFIAPI
> +NvmeFreeResource (
> + IN OUT NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Sends an NVM Express Command Packet to an NVM Express controller or
> namespace. This function supports
> + both blocking I/O and nonblocking I/O. The blocking I/O functionality is
> required, and the nonblocking
> + I/O functionality is optional.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] NamespaceId - Is a 32 bit Namespace ID to which
> the Express HCI command packet will be sent.
> + A Value of 0 denotes the NVM
> Express controller, a Value of all 0FFh in the namespace
> + ID specifies that the command
> packet should be sent to all valid namespaces.
> + @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to
> which the Express HCI command packet will be sent.
> + A Value of 0 denotes the NVM
> Express controller, a Value of all 0FFh in the namespace
> + UUID specifies that the command
> packet should be sent to all valid namespaces.
> + @param[in,out] Packet - A pointer to the NVM Express HCI
> Command Packet to send to the NVMe namespace specified
> + by NamespaceId.
> +
> + @retval EFI_SUCCESS - The NVM Express Command Packet
> was sent by the host. TransferLength bytes were transferred
> + to, or from DataBuffer.
> + @retval EFI_NOT_READY - The NVM Express Command Packet
> could not be sent because the controller is not ready. The caller
> + may retry again later.
> + @retval EFI_DEVICE_ERROR - A device error occurred while
> attempting to send the NVM Express Command Packet.
> + @retval EFI_INVALID_PARAMETER - Namespace, or the contents of
> NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
> + Express Command Packet was not
> sent, so no additional status information is available.
> + @retval EFI_UNSUPPORTED - The command described by the
> NVM Express Command Packet is not supported by the host adapter.
> + The NVM Express Command
> Packet was not sent, so no additional status information is available.
> + @retval EFI_TIMEOUT - A timeout occurred while waiting
> for the NVM Express Command Packet to execute.
> +
> +**/
> +EFI_STATUS
> +NvmePassThru (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT32 NamespaceId,
> + IN UINT64 NamespaceUuid,
> + IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
> + );
> +
> +/**
> + Waits until all NVME commands completed.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - All NVME commands have
> completed
> + @retval EFI_TIMEOUT - Timeout occured
> + @retval EFI_NOT_READY - Not all NVME commands have
> completed
> + @retval others - Error occurred on device side.
> +**/
> +EFI_STATUS
> +NvmeWaitAllComplete (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + );
> +
> +/**
> + Initialize the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - The NVM Express Controller is
> initialized successfully.
> + @retval Others - A device error occurred while
> initializing the controller.
> +
> +**/
> +EFI_STATUS
> +NvmeControllerInit (
> + IN NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Un-initialize the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - The NVM Express Controller is
> un-initialized successfully.
> + @retval Others - A device error occurred while
> un-initializing the controller.
> +
> +**/
> +EFI_STATUS
> +NvmeControllerExit (
> + IN NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Check whether there are available command slots.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - Available command slot is found
> + @retval EFI_NOT_READY - No available command slot is found
> + @retval EFI_DEVICE_ERROR - Error occurred on device side.
> +
> +**/
> +EFI_STATUS
> +NvmeHasFreeCmdSlot (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + );
> +
> +/**
> + Check whether all command slots are clean.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - All command slots are clean
> + @retval EFI_NOT_READY - Not all command slots are clean
> + @retval EFI_DEVICE_ERROR - Error occurred on device side.
> +
> +**/
> +EFI_STATUS
> +NvmeIsAllCmdSlotClean (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + );
> +
> +/**
> + Read sector Data from the NVMe device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in,out] Buffer - The Buffer used to store the Data
> read from the device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be read.
> +
> + @retval EFI_SUCCESS - Datum are read from the device.
> + @retval Others - Fail to read all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeReadSectors (
> + IN NVME_CONTEXT *Nvme,
> + IN OUT UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINT32 Blocks
> + );
> +
> +/**
> + Write sector Data to the NVMe device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer to be written into the
> device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be written.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeWriteSectors (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINT32 Blocks
> + );
> +
> +/**
> + Flushes all modified Data to the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeFlush (
> + IN NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Read some blocks from the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[out] Buffer - The Buffer used to store the Data
> read from the device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be read.
> +
> + @retval EFI_SUCCESS - Datum are read from the device.
> + @retval Others - Fail to read all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeRead (
> + IN NVME_CONTEXT *Nvme,
> + OUT UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINTN Blocks
> + );
> +
> +/**
> + Write some blocks to the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer to be written into the
> device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be written.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeWrite (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINTN Blocks
> + );
> +
> +/**
> + Security send and receive commands.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] SendCommand - The flag to indicate the
> command type, TRUE for Send command and FALSE for receive command
> + @param[in] SecurityProtocol - Security Protocol
> + @param[in] SpSpecific - Security Protocol Specific
> + @param[in] TransferLength - Transfer Length of Buffer (in
> bytes) - always a multiple of 512
> + @param[in,out] TransferBuffer - Address of Data to transfer
> +
> + @return EFI_SUCCESS - Successfully create io submission
> queue.
> + @return others - Fail to send/receive commands.
> +
> +**/
> +EFI_STATUS
> +NvmeSecuritySendReceive (
> + IN NVME_CONTEXT *Nvme,
> + IN BOOLEAN SendCommand,
> + IN UINT8 SecurityProtocol,
> + IN UINT16 SpSpecific,
> + IN UINTN TransferLength,
> + IN OUT VOID *TransferBuffer
> + );
> +
> +#endif
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
> new file mode 100644
> index 000000000000..03376b9e6c9a
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
> @@ -0,0 +1,815 @@
> +/** @file
> + Header file for Registers and Structure definitions
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +#ifndef __OPAL_PASSWORD_NVME_REG_H__
> +#define __OPAL_PASSWORD_NVME_REG_H__
> +
> +//
> +// PCI Header for PCIe root port configuration
> +//
> +#define NVME_PCIE_PCICMD 0x04
> +#define NVME_PCIE_BNUM 0x18
> +#define NVME_PCIE_SEC_BNUM 0x19
> +#define NVME_PCIE_IOBL 0x1C
> +#define NVME_PCIE_MBL 0x20
> +#define NVME_PCIE_PMBL 0x24
> +#define NVME_PCIE_PMBU32 0x28
> +#define NVME_PCIE_PMLU32 0x2C
> +#define NVME_PCIE_INTR 0x3C
> +
> +//
> +// NVMe related definitions
> +//
> +#define PCI_CLASS_MASS_STORAGE_NVM 0x08 // mass
> storage sub-class non-volatile memory.
> +#define PCI_IF_NVMHCI 0x02 // mass
> storage programming interface NVMHCI.
> +
> +#define NVME_ASQ_SIZE 1 //
> Number of admin submission queue entries, which is 0-based
> +#define NVME_ACQ_SIZE 1 //
> Number of admin completion queue entries, which is 0-based
> +
> +#define NVME_CSQ_SIZE 63 //
> Number of I/O submission queue entries, which is 0-based
> +#define NVME_CCQ_SIZE 63 //
> Number of I/O completion queue entries, which is 0-based
> +
> +#define NVME_MAX_IO_QUEUES 2 //
> Number of I/O queues supported by the driver, 1 for AQ, 1 for CQ
> +
> +#define NVME_CSQ_DEPTH
> (NVME_CSQ_SIZE+1)
> +#define NVME_CCQ_DEPTH
> (NVME_CCQ_SIZE+1)
> +#define NVME_PRP_SIZE (4) //
> Pages of PRP list
> +
> +#define NVME_CONTROLLER_ID 0
> +
> +//
> +// Time out Value for Nvme transaction execution
> +//
> +#define NVME_GENERIC_TIMEOUT 5000000
> ///< us
> +#define NVME_CMD_WAIT 100
> ///< us
> +#define NVME_CMD_TIMEOUT
> 20000000 ///< us
> +
> +
> +
> +#define NVME_MEM_MAX_SIZE \
> + (( \
> + 1 /* Controller Data */ + \
> + 1 /* Identify Data */ + \
> + 1 /* ASQ */ +
> \
> + 1 /* ACQ */ +
> \
> + 1 /* SQs */ +
> \
> + 1 /* CQs */ +
> \
> + NVME_PRP_SIZE * NVME_CSQ_DEPTH /* PRPs */
> + \
> + 1 /* SECURITY */
> \
> + ) * EFI_PAGE_SIZE)
> +
> +
> +//
> +// controller register offsets
> +//
> +#define NVME_CAP_OFFSET 0x0000 // Controller Capabilities
> +#define NVME_VER_OFFSET 0x0008 // Version
> +#define NVME_INTMS_OFFSET 0x000c // Interrupt Mask Set
> +#define NVME_INTMC_OFFSET 0x0010 // Interrupt Mask Clear
> +#define NVME_CC_OFFSET 0x0014 // Controller Configuration
> +#define NVME_CSTS_OFFSET 0x001c // Controller Status
> +#define NVME_AQA_OFFSET 0x0024 // Admin Queue Attributes
> +#define NVME_ASQ_OFFSET 0x0028 // Admin Submission Queue
> Base Address
> +#define NVME_ACQ_OFFSET 0x0030 // Admin Completion Queue
> Base Address
> +#define NVME_SQ0_OFFSET 0x1000 // Submission Queue 0
> (admin) Tail Doorbell
> +#define NVME_CQ0_OFFSET 0x1004 // Completion Queue 0
> (admin) Head Doorbell
> +
> +//
> +// These register offsets are defined as 0x1000 + (N * (4 << CAP.DSTRD))
> +// Get the doorbell stride bit shift Value from the controller capabilities.
> +//
> +#define NVME_SQTDBL_OFFSET(QID, DSTRD) 0x1000 + ((2 * (QID)) * (4
> << (DSTRD))) // Submission Queue y (NVM) Tail Doorbell
> +#define NVME_CQHDBL_OFFSET(QID, DSTRD) 0x1000 + (((2 * (QID)) + 1)
> * (4 << (DSTRD))) // Completion Queue y (NVM) Head Doorbell
> +
> +
> +#pragma pack(1)
> +
> +//
> +// 3.1.1 Offset 00h: CAP - Controller Capabilities
> +//
> +typedef struct {
> + UINT16 Mqes; // Maximum Queue Entries Supported
> + UINT8 Cqr:1; // Contiguous Queues Required
> + UINT8 Ams:2; // Arbitration Mechanism Supported
> + UINT8 Rsvd1:5;
> + UINT8 To; // Timeout
> + UINT16 Dstrd:4;
> + UINT16 Rsvd2:1;
> + UINT16 Css:4; // Command Sets Supported
> + UINT16 Rsvd3:7;
> + UINT8 Mpsmin:4;
> + UINT8 Mpsmax:4;
> + UINT8 Rsvd4;
> +} NVME_CAP;
> +
> +//
> +// 3.1.2 Offset 08h: VS - Version
> +//
> +typedef struct {
> + UINT16 Mnr; // Minor version number
> + UINT16 Mjr; // Major version number
> +} NVME_VER;
> +
> +//
> +// 3.1.5 Offset 14h: CC - Controller Configuration
> +//
> +typedef struct {
> + UINT16 En:1; // Enable
> + UINT16 Rsvd1:3;
> + UINT16 Css:3; // Command Set Selected
> + UINT16 Mps:4; // Memory Page Size
> + UINT16 Ams:3; // Arbitration Mechanism Selected
> + UINT16 Shn:2; // Shutdown Notification
> + UINT8 Iosqes:4; // I/O Submission Queue Entry Size
> + UINT8 Iocqes:4; // I/O Completion Queue Entry Size
> + UINT8 Rsvd2;
> +} NVME_CC;
> +
> +//
> +// 3.1.6 Offset 1Ch: CSTS - Controller Status
> +//
> +typedef struct {
> + UINT32 Rdy:1; // Ready
> + UINT32 Cfs:1; // Controller Fatal Status
> + UINT32 Shst:2; // Shutdown Status
> + UINT32 Nssro:1; // NVM Subsystem Reset Occurred
> + UINT32 Rsvd1:27;
> +} NVME_CSTS;
> +
> +//
> +// 3.1.8 Offset 24h: AQA - Admin Queue Attributes
> +//
> +typedef struct {
> + UINT16 Asqs:12; // Submission Queue Size
> + UINT16 Rsvd1:4;
> + UINT16 Acqs:12; // Completion Queue Size
> + UINT16 Rsvd2:4;
> +} NVME_AQA;
> +
> +//
> +// 3.1.9 Offset 28h: ASQ - Admin Submission Queue Base Address
> +//
> +#define NVME_ASQ UINT64
> +
> +//
> +// 3.1.10 Offset 30h: ACQ - Admin Completion Queue Base Address
> +//
> +#define NVME_ACQ UINT64
> +
> +//
> +// 3.1.11 Offset (1000h + ((2y) * (4 << CAP.DSTRD))): SQyTDBL - Submission
> Queue y Tail Doorbell
> +//
> +typedef struct {
> + UINT16 Sqt;
> + UINT16 Rsvd1;
> +} NVME_SQTDBL;
> +
> +//
> +// 3.1.12 Offset (1000h + ((2y + 1) * (4 << CAP.DSTRD))): CQyHDBL -
> Completion Queue y Head Doorbell
> +//
> +typedef struct {
> + UINT16 Cqh;
> + UINT16 Rsvd1;
> +} NVME_CQHDBL;
> +
> +//
> +// NVM command set structures
> +//
> +// Read Command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting Sector Address */
> + //
> + // CDW 12
> + //
> + UINT16 Nlb; /* Number of Sectors */
> + UINT16 Rsvd1:10;
> + UINT16 Prinfo:4; /* Protection Info Check */
> + UINT16 Fua:1; /* Force Unit Access */
> + UINT16 Lr:1; /* Limited Retry */
> + //
> + // CDW 13
> + //
> + UINT32 Af:4; /* Access Frequency */
> + UINT32 Al:2; /* Access Latency */
> + UINT32 Sr:1; /* Sequential Request */
> + UINT32 In:1; /* Incompressible */
> + UINT32 Rsvd2:24;
> + //
> + // CDW 14
> + //
> + UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag
> */
> + //
> + // CDW 15
> + //
> + UINT16 Elbat; /* Expected Logical Block Application Tag */
> + UINT16 Elbatm; /* Expected Logical Block Application Tag
> Mask */
> +} NVME_READ;
> +
> +//
> +// Write Command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting Sector Address */
> + //
> + // CDW 12
> + //
> + UINT16 Nlb; /* Number of Sectors */
> + UINT16 Rsvd1:10;
> + UINT16 Prinfo:4; /* Protection Info Check */
> + UINT16 Fua:1; /* Force Unit Access */
> + UINT16 Lr:1; /* Limited Retry */
> + //
> + // CDW 13
> + //
> + UINT32 Af:4; /* Access Frequency */
> + UINT32 Al:2; /* Access Latency */
> + UINT32 Sr:1; /* Sequential Request */
> + UINT32 In:1; /* Incompressible */
> + UINT32 Rsvd2:24;
> + //
> + // CDW 14
> + //
> + UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
> + //
> + // CDW 15
> + //
> + UINT16 Lbat; /* Logical Block Application Tag */
> + UINT16 Lbatm; /* Logical Block Application Tag Mask */
> +} NVME_WRITE;
> +
> +//
> +// Flush
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Flush; /* Flush */
> +} NVME_FLUSH;
> +
> +//
> +// Write Uncorrectable command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting LBA */
> + //
> + // CDW 12
> + //
> + UINT32 Nlb:16; /* Number of Logical Blocks */
> + UINT32 Rsvd1:16;
> +} NVME_WRITE_UNCORRECTABLE;
> +
> +//
> +// Write Zeroes command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting LBA */
> + //
> + // CDW 12
> + //
> + UINT16 Nlb; /* Number of Logical Blocks */
> + UINT16 Rsvd1:10;
> + UINT16 Prinfo:4; /* Protection Info Check */
> + UINT16 Fua:1; /* Force Unit Access */
> + UINT16 Lr:1; /* Limited Retry */
> + //
> + // CDW 13
> + //
> + UINT32 Rsvd2;
> + //
> + // CDW 14
> + //
> + UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
> + //
> + // CDW 15
> + //
> + UINT16 Lbat; /* Logical Block Application Tag */
> + UINT16 Lbatm; /* Logical Block Application Tag Mask */
> +} NVME_WRITE_ZEROES;
> +
> +//
> +// Compare command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting LBA */
> + //
> + // CDW 12
> + //
> + UINT16 Nlb; /* Number of Logical Blocks */
> + UINT16 Rsvd1:10;
> + UINT16 Prinfo:4; /* Protection Info Check */
> + UINT16 Fua:1; /* Force Unit Access */
> + UINT16 Lr:1; /* Limited Retry */
> + //
> + // CDW 13
> + //
> + UINT32 Rsvd2;
> + //
> + // CDW 14
> + //
> + UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag
> */
> + //
> + // CDW 15
> + //
> + UINT16 Elbat; /* Expected Logical Block Application Tag */
> + UINT16 Elbatm; /* Expected Logical Block Application Tag
> Mask */
> +} NVME_COMPARE;
> +
> +typedef union {
> + NVME_READ Read;
> + NVME_WRITE Write;
> + NVME_FLUSH Flush;
> + NVME_WRITE_UNCORRECTABLE WriteUncorrectable;
> + NVME_WRITE_ZEROES WriteZeros;
> + NVME_COMPARE Compare;
> +} NVME_CMD;
> +
> +typedef struct {
> + UINT16 Mp; /* Maximum Power */
> + UINT8 Rsvd1; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Mps:1; /* Max Power Scale */
> + UINT8 Nops:1; /* Non-Operational State */
> + UINT8 Rsvd2:6; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT32 Enlat; /* Entry Latency */
> + UINT32 Exlat; /* Exit Latency */
> + UINT8 Rrt:5; /* Relative Read Throughput */
> + UINT8 Rsvd3:3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Rrl:5; /* Relative Read Leatency */
> + UINT8 Rsvd4:3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Rwt:5; /* Relative Write Throughput */
> + UINT8 Rsvd5:3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Rwl:5; /* Relative Write Leatency */
> + UINT8 Rsvd6:3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Rsvd7[16]; /* Reserved as of Nvm Express 1.1 Spec */
> +} NVME_PSDESCRIPTOR;
> +
> +//
> +// Identify Controller Data
> +//
> +typedef struct {
> + //
> + // Controller Capabilities and Features 0-255
> + //
> + UINT16 Vid; /* PCI Vendor ID */
> + UINT16 Ssvid; /* PCI sub-system vendor ID */
> + UINT8 Sn[20]; /* Produce serial number */
> +
> + UINT8 Mn[40]; /* Proeduct model number */
> + UINT8 Fr[8]; /* Firmware Revision */
> + UINT8 Rab; /* Recommended Arbitration Burst */
> + UINT8 Ieee_oiu[3]; /* Organization Unique Identifier */
> + UINT8 Cmic; /* Multi-interface Capabilities */
> + UINT8 Mdts; /* Maximum Data Transfer Size */
> + UINT8 Cntlid[2]; /* Controller ID */
> + UINT8 Rsvd1[176]; /* Reserved as of Nvm Express 1.1 Spec */
> + //
> + // Admin Command Set Attributes
> + //
> + UINT16 Oacs; /* Optional Admin Command Support */
> + UINT8 Acl; /* Abort Command Limit */
> + UINT8 Aerl; /* Async Event Request Limit */
> + UINT8 Frmw; /* Firmware updates */
> + UINT8 Lpa; /* Log Page Attributes */
> + UINT8 Elpe; /* Error Log Page Entries */
> + UINT8 Npss; /* Number of Power States Support */
> + UINT8 Avscc; /* Admin Vendor Specific Command
> Configuration */
> + UINT8 Apsta; /* Autonomous Power State Transition
> Attributes */
> + UINT8 Rsvd2[246]; /* Reserved as of Nvm Express 1.1 Spec */
> + //
> + // NVM Command Set Attributes
> + //
> + UINT8 Sqes; /* Submission Queue Entry Size */
> + UINT8 Cqes; /* Completion Queue Entry Size */
> + UINT16 Rsvd3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT32 Nn; /* Number of Namespaces */
> + UINT16 Oncs; /* Optional NVM Command Support */
> + UINT16 Fuses; /* Fused Operation Support */
> + UINT8 Fna; /* Format NVM Attributes */
> + UINT8 Vwc; /* Volatile Write Cache */
> + UINT16 Awun; /* Atomic Write Unit Normal */
> + UINT16 Awupf; /* Atomic Write Unit Power Fail */
> + UINT8 Nvscc; /* NVM Vendor Specific Command
> Configuration */
> + UINT8 Rsvd4; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT16 Acwu; /* Atomic Compare & Write Unit */
> + UINT16 Rsvd5; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT32 Sgls; /* SGL Support */
> + UINT8 Rsvd6[164]; /* Reserved as of Nvm Express 1.1 Spec */
> + //
> + // I/O Command set Attributes
> + //
> + UINT8 Rsvd7[1344]; /* Reserved as of Nvm Express 1.1 Spec */
> + //
> + // Power State Descriptors
> + //
> + NVME_PSDESCRIPTOR PsDescriptor[32];
> +
> + UINT8 VendorData[1024]; /* Vendor specific Data */
> +} NVME_ADMIN_CONTROLLER_DATA;
> +
> +typedef struct {
> + UINT16 Security : 1; /* supports security send/receive
> commands */
> + UINT16 Format : 1; /* supports format nvm command */
> + UINT16 Firmware : 1; /* supports firmware
> activate/download commands */
> + UINT16 Oacs_rsvd : 13;
> + } OACS; // optional admin command support:
> NVME_ADMIN_CONTROLLER_DATA.Oacs
> +
> +typedef struct {
> + UINT16 Ms; /* Metadata Size */
> + UINT8 Lbads; /* LBA Data Size */
> + UINT8 Rp:2; /* Relative Performance */
> + #define LBAF_RP_BEST 00b
> + #define LBAF_RP_BETTER 01b
> + #define LBAF_RP_GOOD 10b
> + #define LBAF_RP_DEGRADED 11b
> + UINT8 Rsvd1:6; /* Reserved as of Nvm Express 1.1 Spec */
> +} NVME_LBAFORMAT;
> +
> +//
> +// Identify Namespace Data
> +//
> +typedef struct {
> + //
> + // NVM Command Set Specific
> + //
> + UINT64 Nsze; /* Namespace Size (total number of blocks
> in formatted namespace) */
> + UINT64 Ncap; /* Namespace Capacity (max number of
> logical blocks) */
> + UINT64 Nuse; /* Namespace Utilization */
> + UINT8 Nsfeat; /* Namespace Features */
> + UINT8 Nlbaf; /* Number of LBA Formats */
> + UINT8 Flbas; /* Formatted LBA Size */
> + UINT8 Mc; /* Metadata Capabilities */
> + UINT8 Dpc; /* End-to-end Data Protection capabilities
> */
> + UINT8 Dps; /* End-to-end Data Protection Type Settings
> */
> + UINT8 Nmic; /* Namespace Multi-path I/O and
> Namespace Sharing Capabilities */
> + UINT8 Rescap; /* Reservation Capabilities */
> + UINT8 Rsvd1[88]; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT64 Eui64; /* IEEE Extended Unique Identifier */
> + //
> + // LBA Format
> + //
> + NVME_LBAFORMAT LbaFormat[16];
> +
> + UINT8 Rsvd2[192]; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 VendorData[3712]; /* Vendor specific Data */
> +} NVME_ADMIN_NAMESPACE_DATA;
> +
> +//
> +// NvmExpress Admin Identify Cmd
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Cns:2;
> + UINT32 Rsvd1:30;
> +} NVME_ADMIN_IDENTIFY;
> +
> +//
> +// NvmExpress Admin Create I/O Completion Queue
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Qid:16; /* Queue Identifier */
> + UINT32 Qsize:16; /* Queue Size */
> +
> + //
> + // CDW 11
> + //
> + UINT32 Pc:1; /* Physically Contiguous */
> + UINT32 Ien:1; /* Interrupts Enabled */
> + UINT32 Rsvd1:14; /* reserved as of Nvm Express 1.1 Spec */
> + UINT32 Iv:16; /* Interrupt Vector */
> +} NVME_ADMIN_CRIOCQ;
> +
> +//
> +// NvmExpress Admin Create I/O Submission Queue
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Qid:16; /* Queue Identifier */
> + UINT32 Qsize:16; /* Queue Size */
> +
> + //
> + // CDW 11
> + //
> + UINT32 Pc:1; /* Physically Contiguous */
> + UINT32 Qprio:2; /* Queue Priority */
> + UINT32 Rsvd1:13; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT32 Cqid:16; /* Completion Queue ID */
> +} NVME_ADMIN_CRIOSQ;
> +
> +//
> +// NvmExpress Admin Delete I/O Completion Queue
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT16 Qid;
> + UINT16 Rsvd1;
> +} NVME_ADMIN_DEIOCQ;
> +
> +//
> +// NvmExpress Admin Delete I/O Submission Queue
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT16 Qid;
> + UINT16 Rsvd1;
> +} NVME_ADMIN_DEIOSQ;
> +
> +//
> +// NvmExpress Admin Security Send
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Resv:8; /* Reserve */
> + UINT32 Spsp:16; /* SP Specific */
> + UINT32 Secp:8; /* Security Protocol */
> +
> + //
> + // CDW 11
> + //
> + UINT32 Tl; /* Transfer Length */
> +} NVME_ADMIN_SECSEND;
> +
> +//
> +// NvmExpress Admin Abort Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Sqid:16; /* Submission Queue identifier */
> + UINT32 Cid:16; /* Command Identifier */
> +} NVME_ADMIN_ABORT;
> +
> +//
> +// NvmExpress Admin Firmware Activate Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Fs:3; /* Submission Queue identifier */
> + UINT32 Aa:2; /* Command Identifier */
> + UINT32 Rsvd1:27;
> +} NVME_ADMIN_FIRMWARE_ACTIVATE;
> +
> +//
> +// NvmExpress Admin Firmware Image Download Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Numd; /* Number of Dwords */
> + //
> + // CDW 11
> + //
> + UINT32 Ofst; /* Offset */
> +} NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD;
> +
> +//
> +// NvmExpress Admin Get Features Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Fid:8; /* Feature Identifier */
> + UINT32 Sel:3; /* Select */
> + UINT32 Rsvd1:21;
> +} NVME_ADMIN_GET_FEATURES;
> +
> +//
> +// NvmExpress Admin Get Log Page Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Lid:8; /* Log Page Identifier */
> + #define LID_ERROR_INFO
> + #define LID_SMART_INFO
> + #define LID_FW_SLOT_INFO
> + UINT32 Rsvd1:8;
> + UINT32 Numd:12; /* Number of Dwords */
> + UINT32 Rsvd2:4; /* Reserved as of Nvm Express 1.1 Spec */
> +} NVME_ADMIN_GET_LOG_PAGE;
> +
> +//
> +// NvmExpress Admin Set Features Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Fid:8; /* Feature Identifier */
> + UINT32 Rsvd1:23;
> + UINT32 Sv:1; /* Save */
> +} NVME_ADMIN_SET_FEATURES;
> +
> +//
> +// NvmExpress Admin Format NVM Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Lbaf:4; /* LBA Format */
> + UINT32 Ms:1; /* Metadata Settings */
> + UINT32 Pi:3; /* Protection Information */
> + UINT32 Pil:1; /* Protection Information Location */
> + UINT32 Ses:3; /* Secure Erase Settings */
> + UINT32 Rsvd1:20;
> +} NVME_ADMIN_FORMAT_NVM;
> +
> +//
> +// NvmExpress Admin Security Receive Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Rsvd1:8;
> + UINT32 Spsp:16; /* SP Specific */
> + UINT32 Secp:8; /* Security Protocol */
> + //
> + // CDW 11
> + //
> + UINT32 Al; /* Allocation Length */
> +} NVME_ADMIN_SECURITY_RECEIVE;
> +
> +//
> +// NvmExpress Admin Security Send Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Rsvd1:8;
> + UINT32 Spsp:16; /* SP Specific */
> + UINT32 Secp:8; /* Security Protocol */
> + //
> + // CDW 11
> + //
> + UINT32 Tl; /* Transfer Length */
> +} NVME_ADMIN_SECURITY_SEND;
> +
> +typedef union {
> + NVME_ADMIN_IDENTIFY Identify;
> + NVME_ADMIN_CRIOCQ CrIoCq;
> + NVME_ADMIN_CRIOSQ CrIoSq;
> + NVME_ADMIN_DEIOCQ DeIoCq;
> + NVME_ADMIN_DEIOSQ DeIoSq;
> + NVME_ADMIN_ABORT Abort;
> + NVME_ADMIN_FIRMWARE_ACTIVATE Activate;
> + NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD
> FirmwareImageDownload;
> + NVME_ADMIN_GET_FEATURES GetFeatures;
> + NVME_ADMIN_GET_LOG_PAGE GetLogPage;
> + NVME_ADMIN_SET_FEATURES SetFeatures;
> + NVME_ADMIN_FORMAT_NVM FormatNvm;
> + NVME_ADMIN_SECURITY_RECEIVE SecurityReceive;
> + NVME_ADMIN_SECURITY_SEND SecuritySend;
> +} NVME_ADMIN_CMD;
> +
> +typedef struct {
> + UINT32 Cdw10;
> + UINT32 Cdw11;
> + UINT32 Cdw12;
> + UINT32 Cdw13;
> + UINT32 Cdw14;
> + UINT32 Cdw15;
> +} NVME_RAW;
> +
> +typedef union {
> + NVME_ADMIN_CMD Admin; // Union of Admin commands
> + NVME_CMD Nvm; // Union of Nvm commands
> + NVME_RAW Raw;
> +} NVME_PAYLOAD;
> +
> +//
> +// Submission Queue
> +//
> +typedef struct {
> + //
> + // CDW 0, Common to all comnmands
> + //
> + UINT8 Opc; // Opcode
> + UINT8 Fuse:2; // Fused Operation
> + UINT8 Rsvd1:5;
> + UINT8 Psdt:1; // PRP or SGL for Data Transfer
> + UINT16 Cid; // Command Identifier
> +
> + //
> + // CDW 1
> + //
> + UINT32 Nsid; // Namespace Identifier
> +
> + //
> + // CDW 2,3
> + //
> + UINT64 Rsvd2;
> +
> + //
> + // CDW 4,5
> + //
> + UINT64 Mptr; // Metadata Pointer
> +
> + //
> + // CDW 6-9
> + //
> + UINT64 Prp[2]; // First and second PRP entries
> +
> + NVME_PAYLOAD Payload;
> +
> +} NVME_SQ;
> +
> +//
> +// Completion Queue
> +//
> +typedef struct {
> + //
> + // CDW 0
> + //
> + UINT32 Dword0;
> + //
> + // CDW 1
> + //
> + UINT32 Rsvd1;
> + //
> + // CDW 2
> + //
> + UINT16 Sqhd; // Submission Queue Head Pointer
> + UINT16 Sqid; // Submission Queue Identifier
> + //
> + // CDW 3
> + //
> + UINT16 Cid; // Command Identifier
> + UINT16 Pt:1; // Phase Tag
> + UINT16 Sc:8; // Status Code
> + UINT16 Sct:3; // Status Code Type
> + UINT16 Rsvd2:2;
> + UINT16 Mo:1; // More
> + UINT16 Dnr:1; // Retry
> +} NVME_CQ;
> +
> +//
> +// Nvm Express Admin cmd opcodes
> +//
> +#define NVME_ADMIN_DELIOSQ_OPC 0
> +#define NVME_ADMIN_CRIOSQ_OPC 1
> +#define NVME_ADMIN_DELIOCQ_OPC 4
> +#define NVME_ADMIN_CRIOCQ_OPC 5
> +#define NVME_ADMIN_IDENTIFY_OPC 6
> +#define NVME_ADMIN_SECURITY_SEND_OPC 0x81
> +#define NVME_ADMIN_SECURITY_RECV_OPC 0x82
> +
> +#define NVME_IO_FLUSH_OPC 0
> +#define NVME_IO_WRITE_OPC 1
> +#define NVME_IO_READ_OPC 2
> +
> +//
> +// Offset from the beginning of private Data queue Buffer
> +//
> +#define NVME_ASQ_BUF_OFFSET EFI_PAGE_SIZE
> +
> +#pragma pack()
> +
> +#endif
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
> new file mode 100644
> index 000000000000..17fda410dc54
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
> @@ -0,0 +1,65 @@
> +/** @file
> + Opal Password common header file.
> +
> +Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef _OPAL_PASSWORD_COMMON_H_
> +#define _OPAL_PASSWORD_COMMON_H_
> +
> +#define OPAL_DEVICE_TYPE_UNKNOWN 0x0
> +#define OPAL_DEVICE_TYPE_ATA 0x1
> +#define OPAL_DEVICE_TYPE_NVME 0x2
> +
> +typedef struct {
> + UINT16 Segment;
> + UINT8 Bus;
> + UINT8 Device;
> + UINT8 Function;
> + UINT8 Reserved;
> +} OPAL_PCI_DEVICE;
> +
> +typedef struct {
> + UINT16 Length;
> + OPAL_PCI_DEVICE Device;
> + UINT8 PasswordLength;
> + UINT8 Password[32];
> + UINT16 OpalBaseComId;
> + UINT32 BarAddr;
> +} OPAL_DEVICE_COMMON;
> +
> +#define OPAL_DEVICE_ATA_GUID { 0xcb934fe1, 0xb8cd, 0x46b1, { 0xa0, 0x58,
> 0xdd, 0xcb, 0x7, 0xb7, 0xb4, 0x17 } }
> +
> +typedef struct {
> + UINT16 Length;
> + OPAL_PCI_DEVICE Device;
> + UINT8 PasswordLength;
> + UINT8 Password[32];
> + UINT16 OpalBaseComId;
> + UINT32 BarAddr;
> + UINT16 Port;
> + UINT16 PortMultiplierPort;
> +} OPAL_DEVICE_ATA;
> +
> +#define OPAL_DEVICE_NVME_GUID { 0xde116925, 0xaf7f, 0x42d9, { 0x83,
> 0xc0, 0x7e, 0xd6, 0x26, 0x59, 0x0, 0xfb } }
> +
> +typedef struct {
> + UINT16 Length;
> + OPAL_PCI_DEVICE Device;
> + UINT8 PasswordLength;
> + UINT8 Password[32];
> + UINT16 OpalBaseComId;
> + UINT32 BarAddr;
> + UINT32 NvmeNamespaceId;
> + OPAL_PCI_DEVICE PciBridgeNode[0];
> +} OPAL_DEVICE_NVME;
> +
> +#endif // _OPAL_PASSWORD_COMMON_H_
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> new file mode 100644
> index 000000000000..0ac550a72873
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> @@ -0,0 +1,81 @@
> +## @file
> +# This is a OpalPasswordDxe driver.
> +#
> +# This module is used to Management the Opal feature
> +# for Opal supported devices.
> +#
> +# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be found
> at
> +# http://opensource.org/licenses/bsd-license.php
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +##
> +[Defines]
> + INF_VERSION = 0x00010007
> + BASE_NAME = OpalPasswordDxe
> + FILE_GUID =
> E3E4048D-6C0C-43E4-AE1C-FFB579D8EF41
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + ENTRY_POINT = EfiDriverEntryPoint
> + UNLOAD_IMAGE = OpalEfiDriverUnload
> +
> +#
> +# The following information is for reference only and not required by the build
> tools.
> +#
> +# VALID_ARCHITECTURES = IA32 X64 IPF EBC
> +#
> +
> +[Sources]
> + OpalDriver.c
> + OpalDriver.h
> + OpalPasswordCommon.h
> + OpalHii.c
> + OpalHii.h
> + OpalHiiCallbacks.c
> + OpalHiiFormValues.h
> + OpalHiiFormStrings.uni
> + OpalPasswordForm.vfr
> + ComponentName.c
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + SecurityPkg/SecurityPkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + MemoryAllocationLib
> + UefiBootServicesTableLib
> + UefiDriverEntryPoint
> + UefiRuntimeServicesTableLib
> + DxeServicesTableLib
> + UefiHiiServicesLib
> + BaseMemoryLib
> + DebugLib
> + HiiLib
> + PrintLib
> + DevicePathLib
> + UefiLib
> + TcgStorageOpalLib
> + Tcg2PhysicalPresenceLib
> + PciLib
> + S3BootScriptLib
> + LockBoxLib
> +
> +[Protocols]
> + gEfiHiiConfigAccessProtocolGuid ## PRODUCES
> + gEfiStorageSecurityCommandProtocolGuid ## CONSUMES
> + gEfiComponentNameProtocolGuid ## PRODUCES
> + gEfiComponentName2ProtocolGuid ## PRODUCES
> + gEfiBlockIoProtocolGuid ## CONSUMES
> + gEfiPciIoProtocolGuid ## CONSUMES
> + gEfiDevicePathToTextProtocolGuid ## CONSUMES
> +
> +[Guids]
> + gEfiEndOfDxeEventGroupGuid ## CONSUMES
> ## Event
> +
> +[Depex]
> + gEfiHiiStringProtocolGuid AND gEfiHiiDatabaseProtocolGuid
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
> new file mode 100644
> index 000000000000..cba388723305
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
> @@ -0,0 +1,309 @@
> +/** @file
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +#include "OpalHiiFormValues.h"
> +
> +
> +#define EFI_HII_PLATFORM_SETUP_FORMSET_GUID \
> + { 0x93039971, 0x8545, 0x4b04, { 0xb4, 0x5e, 0x32, 0xeb, 0x83, 0x26, 0x4,
> 0xe } }
> +
> +formset
> + guid = SETUP_FORMSET_GUID,
> + title = STRING_TOKEN(STR_OPAL),
> + help = STRING_TOKEN(STR_FORM_SET_HELP),
> + classguid = EFI_HII_PLATFORM_SETUP_FORMSET_GUID,
> +
> + // Define a Buffer Storage (EFI_IFR_VARSTORE) that will be filled
> + // out initially through extractConfig call
> + varstore OPAL_HII_CONFIGURATION, // This is the Data
> structure type
> + name = OpalHiiConfig, // Define referenced name
> in vfr
> + guid = SETUP_VARIABLE_GUID; // GUID of this Buffer
> storage
> +
> +form formid = FORMID_VALUE_MAIN_MENU,
> + title = STRING_TOKEN(STR_OPAL);
> +
> + //CONFIG_VARIABLE(HII_KEY(HII_KEY_ID_VAR_SUPPORTED_DISKS),
> SupportedDisks, 0x0, 0xFFFF);
> + suppressif TRUE;
> + numeric
> + name = SupportedDisks,
> + varid = OpalHiiConfig.SupportedDisks,
> + prompt = STRING_TOKEN(STR_NULL),
> + help = STRING_TOKEN(STR_NULL),
> + flags = INTERACTIVE,
> + key = 0x8002,
> + minimum = 0x0,
> + maximum = 0xFFFF,
> + endnumeric;
> + endif;
> +
> + subtitle text = STRING_TOKEN(STR_MAIN_OPAL_VERSION);
> +
> + subtitle text = STRING_TOKEN(STR_NULL);
> +
> + subtitle text = STRING_TOKEN(STR_MAIN_PHY_DISKS_LBL);
> +
> + //DISK( 0 );
> + suppressif ( questionref(SupportedDisks) & ( 0x1 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_0 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8001;
> + endif;
> +
> + //DISK( 1 );
> + suppressif ( questionref(SupportedDisks) & ( 0x2 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_1 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8101;
> + endif;
> +
> + //DISK( 2 );
> + suppressif ( questionref(SupportedDisks) & ( 0x4 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_2 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8201;
> + endif;
> +
> + //DISK( 3 );
> + suppressif ( questionref(SupportedDisks) & ( 0x8 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_3 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8301;
> + endif;
> +
> + //DISK( 4 );
> + suppressif ( questionref(SupportedDisks) & ( 0x10 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_4 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8401;
> + endif;
> +
> + //DISK( 5 );
> + suppressif ( questionref(SupportedDisks) & ( 0x20 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_5 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8501;
> + endif;
> +
> + //No disks on system
> + suppressif ideqval OpalHiiConfig.NumDisks > 0;
> + text
> + help = STRING_TOKEN(STR_NULL),
> + text =
> STRING_TOKEN(STR_MAIN_NO_DISKS_PRESENT_LBL);
> + endif;
> +
> + subtitle text = STRING_TOKEN(STR_NULL);
> +
> + grayoutif TRUE;
> + text
> + help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
> + text = STRING_TOKEN(STR_BLOCKSID_STATUS);
> + text
> + help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
> + text = STRING_TOKEN(STR_BLOCKSID_STATUS1);
> + text
> + help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
> + text = STRING_TOKEN(STR_BLOCKSID_STATUS2);
> + text
> + help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
> + text = STRING_TOKEN(STR_BLOCKSID_STATUS3);
> + subtitle text = STRING_TOKEN(STR_NULL);
> + endif;
> +
> + oneof varid = OpalHiiConfig.EnableBlockSid,
> + questionid = 0x8004,
> + prompt = STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID),
> + help =
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_HELP),
> + flags = INTERACTIVE,
> + option text = STRING_TOKEN(STR_NONE), value = 0, flags = DEFAULT |
> MANUFACTURING | RESET_REQUIRED;
> + option text = STRING_TOKEN(STR_ENABLED), value = 1, flags =
> RESET_REQUIRED;
> + option text = STRING_TOKEN(STR_DISABLED), value = 2, flags =
> RESET_REQUIRED;
> + option text =
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_TRUE), value = 3, flags =
> RESET_REQUIRED;
> + option text =
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_FALSE), value = 4, flags =
> RESET_REQUIRED;
> + option text =
> STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_TRUE), value = 5, flags =
> RESET_REQUIRED;
> + option text =
> STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_FALSE), value = 6, flags =
> RESET_REQUIRED;
> + endoneof;
> +
> +
> +
> +endform; // MAIN MENU FORM
> +
> +//
> +///////////////// DISK INFO FORM /////////////////
> +//
> +form formid = FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + title = STRING_TOKEN(STR_OPAL);
> +
> + suppressif TRUE;
> + numeric
> + name = SelectedDiskAvailableActions,
> + varid = OpalHiiConfig.SelectedDiskAvailableActions,
> + prompt = STRING_TOKEN(STR_NULL),
> + help = STRING_TOKEN(STR_NULL),
> + flags = INTERACTIVE,
> + key = 0x8003,
> + minimum = 0x0,
> + maximum = 0xFFFF,
> + endnumeric;
> + endif;
> +
> + suppressif TRUE;
> + checkbox varid = OpalHiiConfig.KeepUserDataForced,
> + prompt = STRING_TOKEN(STR_NULL),
> + help = STRING_TOKEN(STR_NULL),
> + endcheckbox;
> + endif;
> +
> + subtitle text = STRING_TOKEN(STR_MAIN_OPAL_VERSION);
> +
> + subtitle text = STRING_TOKEN(STR_NULL);
> +
> + text
> + help = STRING_TOKEN(STR_NULL),
> + text = STRING_TOKEN(STR_DISK_INFO_SELECTED_DISK_NAME);
> +
> + subtitle text = STRING_TOKEN(STR_NULL);
> +
> + subtitle text = STRING_TOKEN(STR_OPAL_REQUESTS_LBL);
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_SET_ADMIN_PWD ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.SetAdminPwd,
> + prompt =
> STRING_TOKEN(STR_DISK_INFO_SET_ADMIN_PSWD),
> + help =
> STRING_TOKEN(STR_DISK_INFO_SET_ADMIN_PSWD_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8005,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_SET_USER_PWD ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.DisableUser == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.SetUserPwd,
> + prompt = STRING_TOKEN(STR_DISK_INFO_SET_USER_PSWD),
> + help =
> STRING_TOKEN(STR_DISK_INFO_SET_USER_PSWD_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8006,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_SECURE_ERASE ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.SecureErase,
> + prompt = STRING_TOKEN(STR_DISK_INFO_SECURE_ERASE),
> + help =
> STRING_TOKEN(STR_DISK_INFO_SECURE_ERASE_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8007,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_REVERT ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetAdminPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetUserPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SecureErase == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.DisableUser == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.Revert,
> + prompt = STRING_TOKEN(STR_DISK_INFO_REVERT),
> + help = STRING_TOKEN(STR_DISK_INFO_REVERT_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8008,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ideqval OpalHiiConfig.OpalRequest.Revert == 0;
> + grayoutif ideqval OpalHiiConfig.KeepUserDataForced == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.KeepUserData,
> + prompt =
> STRING_TOKEN(STR_KEEP_USER_DATA_PROMPT),
> + help = STRING_TOKEN(STR_KEEP_USER_DATA_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8009,
> + endcheckbox;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_PSID_REVERT ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetAdminPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetUserPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SecureErase == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.DisableUser == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.EnableFeature == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.PsidRevert,
> + prompt = STRING_TOKEN(STR_DISK_INFO_PSID_REVERT),
> + help =
> STRING_TOKEN(STR_DISK_INFO_PSID_REVERT_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x800A,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_DISABLE_USER ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetUserPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.DisableUser,
> + prompt = STRING_TOKEN(STR_DISK_INFO_DISABLE_USER),
> + help =
> STRING_TOKEN(STR_DISK_INFO_DISABLE_USER_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x800B,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_ENABLE_FEATURE ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.EnableFeature,
> + prompt = STRING_TOKEN(STR_DISK_INFO_ENABLE_FEATURE),
> + help =
> STRING_TOKEN(STR_DISK_INFO_ENABLE_FEATURE_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x800C,
> + endcheckbox;
> + endif;
> + endif;
> +
> +endform; // DISK INFO FORM
> +
> +endformset;
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
> new file mode 100644
> index 000000000000..1788b2ad3339
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
> @@ -0,0 +1,940 @@
> +/** @file
> + Opal Password PEI driver which is used to unlock Opal Password for S3.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalPasswordPei.h"
> +
> +EFI_GUID mOpalDeviceAtaGuid = OPAL_DEVICE_ATA_GUID;
> +EFI_GUID mOpalDeviceNvmeGuid = OPAL_DEVICE_NVME_GUID;
> +
> +#define OPAL_PCIE_ROOTPORT_SAVESIZE (0x40)
> +#define STORE_INVALID_ROOTPORT_INDEX ((UINT8) -1)
> +
> +/**
> + Get IOMMU PPI.
> +
> + @return Pointer to IOMMU PPI.
> +
> +**/
> +EDKII_IOMMU_PPI *
> +GetIoMmu (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> + EDKII_IOMMU_PPI *IoMmu;
> +
> + IoMmu = NULL;
> + Status = PeiServicesLocatePpi (
> + &gEdkiiIoMmuPpiGuid,
> + 0,
> + NULL,
> + (VOID **) &IoMmu
> + );
> + if (!EFI_ERROR (Status) && (IoMmu != NULL)) {
> + return IoMmu;
> + }
> +
> + return NULL;
> +}
> +
> +/**
> + Allocates pages that are suitable for an OperationBusMasterCommonBuffer
> or
> + OperationBusMasterCommonBuffer64 mapping.
> +
> + @param Pages The number of pages to allocate.
> + @param HostAddress A pointer to store the base system
> memory address of the
> + allocated range.
> + @param DeviceAddress The resulting map address for the bus
> master PCI controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to Unmap().
> +
> + @retval EFI_SUCCESS The requested memory pages were
> allocated.
> + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal
> attribute bits are
> + MEMORY_WRITE_COMBINE and
> MEMORY_CACHED.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The memory pages could not be
> allocated.
> +
> +**/
> +EFI_STATUS
> +IoMmuAllocateBuffer (
> + IN UINTN Pages,
> + OUT VOID **HostAddress,
> + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + )
> +{
> + EFI_STATUS Status;
> + UINTN NumberOfBytes;
> + EFI_PHYSICAL_ADDRESS HostPhyAddress;
> + EDKII_IOMMU_PPI *IoMmu;
> +
> + *HostAddress = NULL;
> + *DeviceAddress = 0;
> + *Mapping = NULL;
> +
> + IoMmu = GetIoMmu ();
> +
> + if (IoMmu != NULL) {
> + Status = IoMmu->AllocateBuffer (
> + IoMmu,
> + EfiBootServicesData,
> + Pages,
> + HostAddress,
> + 0
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + NumberOfBytes = EFI_PAGES_TO_SIZE (Pages);
> + Status = IoMmu->Map (
> + IoMmu,
> + EdkiiIoMmuOperationBusMasterCommonBuffer,
> + *HostAddress,
> + &NumberOfBytes,
> + DeviceAddress,
> + Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
> + *HostAddress = NULL;
> + return EFI_OUT_OF_RESOURCES;
> + }
> + Status = IoMmu->SetAttribute (
> + IoMmu,
> + *Mapping,
> + EDKII_IOMMU_ACCESS_READ |
> EDKII_IOMMU_ACCESS_WRITE
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmu->Unmap (IoMmu, *Mapping);
> + IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
> + *Mapping = NULL;
> + *HostAddress = NULL;
> + return Status;
> + }
> + } else {
> + Status = PeiServicesAllocatePages (
> + EfiBootServicesData,
> + Pages,
> + &HostPhyAddress
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + *HostAddress = (VOID *) (UINTN) HostPhyAddress;
> + *DeviceAddress = HostPhyAddress;
> + *Mapping = NULL;
> + }
> + return Status;
> +}
> +
> +/**
> + Frees memory that was allocated with AllocateBuffer().
> +
> + @param Pages The number of pages to free.
> + @param HostAddress The base system memory address of the
> allocated range.
> + @param Mapping The mapping value returned from Map().
> +
> +**/
> +VOID
> +IoMmuFreeBuffer (
> + IN UINTN Pages,
> + IN VOID *HostAddress,
> + IN VOID *Mapping
> + )
> +{
> + EDKII_IOMMU_PPI *IoMmu;
> +
> + IoMmu = GetIoMmu ();
> +
> + if (IoMmu != NULL) {
> + IoMmu->SetAttribute (IoMmu, Mapping, 0);
> + IoMmu->Unmap (IoMmu, Mapping);
> + IoMmu->FreeBuffer (IoMmu, Pages, HostAddress);
> + } else {
> + PeiServicesFreePages (
> + (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress,
> + Pages
> + );
> + }
> +}
> +
> +/**
> + Provide IO action support.
> +
> + @param[in] PeiDev The opal device need to perform
> trusted IO.
> + @param[in] IoType OPAL_IO_TYPE indicating whether to
> perform a Trusted Send or Trusted Receive.
> + @param[in] SecurityProtocol Security Protocol
> + @param[in] SpSpecific Security Protocol Specific
> + @param[in] TransferLength Transfer Length of Buffer (in bytes) -
> always a multiple of 512
> + @param[in] Buffer Address of Data to transfer
> +
> + @retval EFI_SUCCESS Perform the IO action success.
> + @retval Others Perform the IO action failed.
> +
> +**/
> +EFI_STATUS
> +PerformTrustedIo (
> + OPAL_PEI_DEVICE *PeiDev,
> + OPAL_IO_TYPE IoType,
> + UINT8 SecurityProtocol,
> + UINT16 SpSpecific,
> + UINTN TransferLength,
> + VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINTN BufferSizeBlocks;
> + EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
> + OPAL_DEVICE_ATA *DevInfoAta;
> + AHCI_CONTEXT *AhciContext;
> + NVME_CONTEXT *NvmeContext;
> +
> + Status = EFI_DEVICE_ERROR;
> + if (PeiDev->DeviceType == OPAL_DEVICE_TYPE_ATA) {
> + DevInfoAta = (OPAL_DEVICE_ATA *) PeiDev->Device;
> + AhciContext = (AHCI_CONTEXT *) PeiDev->Context;
> +
> + BufferSizeBlocks = TransferLength / 512;
> +
> + ZeroMem( &AtaCommandBlock, sizeof( EFI_ATA_COMMAND_BLOCK ) );
> + AtaCommandBlock.AtaCommand = ( IoType == OpalSend ) ?
> ATA_COMMAND_TRUSTED_SEND : ATA_COMMAND_TRUSTED_RECEIVE;
> + AtaCommandBlock.AtaSectorCount = ( UINT8 )BufferSizeBlocks;
> + AtaCommandBlock.AtaSectorNumber = ( UINT8 )( BufferSizeBlocks >> 8 );
> + AtaCommandBlock.AtaFeatures = SecurityProtocol;
> + AtaCommandBlock.AtaCylinderLow = ( UINT8 )( SpSpecific >> 8 );
> + AtaCommandBlock.AtaCylinderHigh = ( UINT8 )( SpSpecific );
> + AtaCommandBlock.AtaDeviceHead = ATA_DEVICE_LBA;
> +
> +
> + ZeroMem( AhciContext->Buffer, HDD_PAYLOAD );
> + ASSERT( TransferLength <= HDD_PAYLOAD );
> +
> + if (IoType == OpalSend) {
> + CopyMem( AhciContext->Buffer, Buffer, TransferLength );
> + }
> +
> + Status = AhciPioTransfer(
> + AhciContext,
> + (UINT8) DevInfoAta->Port,
> + (UINT8) DevInfoAta->PortMultiplierPort,
> + NULL,
> + 0,
> + ( IoType == OpalSend ) ? FALSE : TRUE, // i/o direction
> + &AtaCommandBlock,
> + NULL,
> + AhciContext->Buffer,
> + (UINT32)TransferLength,
> + ATA_TIMEOUT
> + );
> +
> + if (IoType == OpalRecv) {
> + CopyMem( Buffer, AhciContext->Buffer, TransferLength );
> + }
> + } else if (PeiDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
> + NvmeContext = (NVME_CONTEXT *) PeiDev->Context;
> + Status = NvmeSecuritySendReceive (
> + NvmeContext,
> + IoType == OpalSend,
> + SecurityProtocol,
> + SwapBytes16(SpSpecific),
> + TransferLength,
> + Buffer
> + );
> + } else {
> + DEBUG((DEBUG_ERROR, "DeviceType(%x) not support.\n",
> PeiDev->DeviceType));
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Send a security protocol command to a device that receives data and/or the
> result
> + of one or more commands sent by SendData.
> +
> + The ReceiveData function sends a security protocol command to the given
> MediaId.
> + The security protocol command sent is defined by SecurityProtocolId and
> contains
> + the security protocol specific data SecurityProtocolSpecificData. The function
> + returns the data from the security protocol command in PayloadBuffer.
> +
> + For devices supporting the SCSI command set, the security protocol
> command is sent
> + using the SECURITY PROTOCOL IN command defined in SPC-4.
> +
> + For devices supporting the ATA command set, the security protocol
> command is sent
> + using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if
> PayloadBufferSize
> + is non-zero.
> +
> + If the PayloadBufferSize is zero, the security protocol command is sent using
> the
> + Trusted Non-Data command defined in ATA8-ACS.
> +
> + If PayloadBufferSize is too small to store the available data from the security
> + protocol command, the function shall copy PayloadBufferSize bytes into the
> + PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
> +
> + If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is
> non-zero,
> + the function shall return EFI_INVALID_PARAMETER.
> +
> + If the given MediaId does not support security protocol commands, the
> function shall
> + return EFI_UNSUPPORTED. If there is no media in the device, the function
> returns
> + EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
> device,
> + the function returns EFI_MEDIA_CHANGED.
> +
> + If the security protocol fails to complete within the Timeout period, the
> function
> + shall return EFI_TIMEOUT.
> +
> + If the security protocol command completes without an error, the function
> shall
> + return EFI_SUCCESS. If the security protocol command completes with an
> error, the
> + function shall return EFI_DEVICE_ERROR.
> +
> + @param This Indicates a pointer to the calling
> context.
> + @param MediaId ID of the medium to receive
> data from.
> + @param Timeout The timeout, in 100ns units, to
> use for the execution
> + of the security protocol
> command. A Timeout value of 0
> + means that this function will wait
> indefinitely for the
> + security protocol command to
> execute. If Timeout is greater
> + than zero, then this function will
> return EFI_TIMEOUT
> + if the time required to execute
> the receive data command
> + is greater than Timeout.
> + @param SecurityProtocolId The value of the "Security
> Protocol" parameter of
> + the security protocol command
> to be sent.
> + @param SecurityProtocolSpecificData The value of the "Security Protocol
> Specific" parameter
> + of the security protocol
> command to be sent.
> + @param PayloadBufferSize Size in bytes of the payload data
> buffer.
> + @param PayloadBuffer A pointer to a destination buffer
> to store the security
> + protocol command specific
> payload data for the security
> + protocol command. The caller is
> responsible for having
> + either implicit or explicit
> ownership of the buffer.
> + @param PayloadTransferSize A pointer to a buffer to store the
> size in bytes of the
> + data written to the payload data
> buffer.
> +
> + @retval EFI_SUCCESS The security protocol command
> completed successfully.
> + @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was
> too small to store the available
> + data from the device. The
> PayloadBuffer contains the truncated data.
> + @retval EFI_UNSUPPORTED The given MediaId does not
> support security protocol commands.
> + @retval EFI_DEVICE_ERROR The security protocol command
> completed with an error.
> + @retval EFI_NO_MEDIA There is no media in the device.
> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
> current media.
> + @retval EFI_INVALID_PARAMETER The PayloadBuffer or
> PayloadTransferSize is NULL and
> + PayloadBufferSize is non-zero.
> + @retval EFI_TIMEOUT A timeout occurred while waiting
> for the security
> + protocol command to execute.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +SecurityReceiveData (
> + IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
> + IN UINT32 MediaId,
> + IN UINT64 Timeout,
> + IN UINT8 SecurityProtocolId,
> + IN UINT16
> SecurityProtocolSpecificData,
> + IN UINTN PayloadBufferSize,
> + OUT VOID *PayloadBuffer,
> + OUT UINTN *PayloadTransferSize
> + )
> +{
> + OPAL_PEI_DEVICE *PeiDev;
> +
> + PeiDev = OPAL_PEI_DEVICE_FROM_THIS (This);
> + if (PeiDev == NULL) {
> + return EFI_DEVICE_ERROR;
> + }
> +
> + return PerformTrustedIo (
> + PeiDev,
> + OpalRecv,
> + SecurityProtocolId,
> + SecurityProtocolSpecificData,
> + PayloadBufferSize,
> + PayloadBuffer
> + );
> +}
> +
> +/**
> + Send a security protocol command to a device.
> +
> + The SendData function sends a security protocol command containing the
> payload
> + PayloadBuffer to the given MediaId. The security protocol command sent is
> + defined by SecurityProtocolId and contains the security protocol specific data
> + SecurityProtocolSpecificData. If the underlying protocol command requires a
> + specific padding for the command payload, the SendData function shall add
> padding
> + bytes to the command payload to satisfy the padding requirements.
> +
> + For devices supporting the SCSI command set, the security protocol
> command is sent
> + using the SECURITY PROTOCOL OUT command defined in SPC-4.
> +
> + For devices supporting the ATA command set, the security protocol
> command is sent
> + using one of the TRUSTED SEND commands defined in ATA8-ACS if
> PayloadBufferSize
> + is non-zero. If the PayloadBufferSize is zero, the security protocol command
> is
> + sent using the Trusted Non-Data command defined in ATA8-ACS.
> +
> + If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
> + return EFI_INVALID_PARAMETER.
> +
> + If the given MediaId does not support security protocol commands, the
> function
> + shall return EFI_UNSUPPORTED. If there is no media in the device, the
> function
> + returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in
> the
> + device, the function returns EFI_MEDIA_CHANGED.
> +
> + If the security protocol fails to complete within the Timeout period, the
> function
> + shall return EFI_TIMEOUT.
> +
> + If the security protocol command completes without an error, the function
> shall return
> + EFI_SUCCESS. If the security protocol command completes with an error, the
> function
> + shall return EFI_DEVICE_ERROR.
> +
> + @param This Indicates a pointer to the calling
> context.
> + @param MediaId ID of the medium to receive
> data from.
> + @param Timeout The timeout, in 100ns units, to
> use for the execution
> + of the security protocol
> command. A Timeout value of 0
> + means that this function will wait
> indefinitely for the
> + security protocol command to
> execute. If Timeout is greater
> + than zero, then this function will
> return EFI_TIMEOUT
> + if the time required to execute
> the send data command
> + is greater than Timeout.
> + @param SecurityProtocolId The value of the "Security
> Protocol" parameter of
> + the security protocol command
> to be sent.
> + @param SecurityProtocolSpecificData The value of the "Security Protocol
> Specific" parameter
> + of the security protocol
> command to be sent.
> + @param PayloadBufferSize Size in bytes of the payload data
> buffer.
> + @param PayloadBuffer A pointer to a destination buffer
> to store the security
> + protocol command specific
> payload data for the security
> + protocol command.
> +
> + @retval EFI_SUCCESS The security protocol command
> completed successfully.
> + @retval EFI_UNSUPPORTED The given MediaId does not
> support security protocol commands.
> + @retval EFI_DEVICE_ERROR The security protocol command
> completed with an error.
> + @retval EFI_NO_MEDIA There is no media in the device.
> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
> current media.
> + @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and
> PayloadBufferSize is non-zero.
> + @retval EFI_TIMEOUT A timeout occurred while waiting
> for the security
> + protocol command to execute.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +SecuritySendData (
> + IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
> + IN UINT32 MediaId,
> + IN UINT64 Timeout,
> + IN UINT8 SecurityProtocolId,
> + IN UINT16
> SecurityProtocolSpecificData,
> + IN UINTN PayloadBufferSize,
> + IN VOID *PayloadBuffer
> + )
> +{
> + OPAL_PEI_DEVICE *PeiDev;
> +
> + PeiDev = OPAL_PEI_DEVICE_FROM_THIS (This);
> + if (PeiDev == NULL) {
> + return EFI_DEVICE_ERROR;
> + }
> +
> + return PerformTrustedIo (
> + PeiDev,
> + OpalSend,
> + SecurityProtocolId,
> + SecurityProtocolSpecificData,
> + PayloadBufferSize,
> + PayloadBuffer
> + );
> +
> +}
> +
> +/**
> + Save/Restore RootPort configuration space.
> +
> + @param[in] DevInfoNvme Pointer to NVMe device info.
> + @param[in] SaveAction TRUE: Save, FALSE: Restore
> + @param[in,out] PcieConfBufferList Configuration space data buffer for
> save/restore
> +
> + @return PCIE base address of this RootPort
> +**/
> +UINTN
> +SaveRestoreRootportConfSpace (
> + IN OPAL_DEVICE_NVME *DevInfoNvme,
> + IN BOOLEAN SaveAction,
> + IN OUT UINT8 **PcieConfBufferList
> + )
> +{
> + UINTN RpBase;
> + UINTN Length;
> + OPAL_PCI_DEVICE *DevNode;
> + UINT8 *StorePcieConfData;
> + UINTN Index;
> +
> + Length = 0;
> + Index = 0;
> + RpBase = 0;
> +
> + while (sizeof (OPAL_DEVICE_NVME) + Length < DevInfoNvme->Length) {
> + DevNode = (OPAL_PCI_DEVICE *)((UINT8*)DevInfoNvme->PciBridgeNode
> + Length);
> + RpBase = PCI_LIB_ADDRESS (DevNode->Bus, DevNode->Device,
> DevNode->Function, 0x0);
> +
> + if (PcieConfBufferList != NULL) {
> + if (SaveAction) {
> + StorePcieConfData = (UINT8 *) AllocateZeroPool
> (OPAL_PCIE_ROOTPORT_SAVESIZE);
> + ASSERT (StorePcieConfData != NULL);
> + OpalPciRead (StorePcieConfData, RpBase,
> OPAL_PCIE_ROOTPORT_SAVESIZE);
> + PcieConfBufferList[Index] = StorePcieConfData;
> + } else {
> + // Skip PCIe Command & Status registers
> + StorePcieConfData = PcieConfBufferList[Index];
> + OpalPciWrite (RpBase, StorePcieConfData, 4);
> + OpalPciWrite (RpBase + 8, StorePcieConfData + 8,
> OPAL_PCIE_ROOTPORT_SAVESIZE - 8);
> +
> + FreePool (StorePcieConfData);
> + }
> + }
> +
> + Length += sizeof (OPAL_PCI_DEVICE);
> + Index ++;
> + }
> +
> + return RpBase;
> +}
> +
> +/**
> + Configure RootPort for downstream PCIe NAND devices.
> +
> + @param[in] RpBase - PCIe configuration space address of this
> RootPort
> + @param[in] BusNumber - Bus number
> + @param[in] MemoryBase - Memory base address
> + @param[in] MemoryLength - Memory size
> +
> +**/
> +VOID
> +ConfigureRootPortForPcieNand (
> + IN UINTN RpBase,
> + IN UINTN BusNumber,
> + IN UINT32 MemoryBase,
> + IN UINT32 MemoryLength
> + )
> +{
> + UINT32 MemoryLimit;
> +
> + DEBUG ((DEBUG_INFO, "ConfigureRootPortForPcieNand, BusNumber: %x,
> MemoryBase: %x, MemoryLength: %x\n",
> + BusNumber, MemoryBase, MemoryLength));
> +
> + if (MemoryLength == 0) {
> + MemoryLimit = MemoryBase;
> + } else {
> + MemoryLimit = MemoryBase + MemoryLength + 0xFFFFF; // 1M
> + }
> +
> + ///
> + /// Configue PCIE configuration space for RootPort
> + ///
> + PciWrite8 (RpBase + NVME_PCIE_BNUM + 1, (UINT8) BusNumber);
> // Secondary Bus Number registers
> + PciWrite8 (RpBase + NVME_PCIE_BNUM + 2, (UINT8) BusNumber);
> // Subordinate Bus Number registers
> + PciWrite8 (RpBase + NVME_PCIE_IOBL, 0xFF);
> // I/O Base registers
> + PciWrite8 (RpBase + NVME_PCIE_IOBL + 1, 0x00);
> // I/O Limit registers
> + PciWrite16 (RpBase + NVME_PCIE_MBL, (UINT16) RShiftU64
> ((UINTN)MemoryBase, 16)); // Memory Base register
> + PciWrite16 (RpBase + NVME_PCIE_MBL + 2, (UINT16) RShiftU64
> ((UINTN)MemoryLimit, 16)); // Memory Limit register
> + PciWrite16 (RpBase + NVME_PCIE_PMBL, 0xFFFF);
> // Prefetchable Memory Base registers
> + PciWrite16 (RpBase + NVME_PCIE_PMBL + 2, 0x0000);
> // Prefetchable Memory Limit registers
> + PciWrite32 (RpBase + NVME_PCIE_PMBU32, 0xFFFFFFFF);
> // Prefetchable Memory Upper Base registers
> + PciWrite32 (RpBase + NVME_PCIE_PMLU32, 0x00000000);
> // Prefetchable Memory Upper Limit registers
> +}
> +
> +/**
> +
> + The function returns whether or not the device is Opal Locked.
> + TRUE means that the device is partially or fully locked.
> + This will perform a Level 0 Discovery and parse the locking feature descriptor
> +
> + @param[in] OpalDev Opal object to determine if
> locked.
> + @param[out] BlockSidSupported Whether device support BlockSid
> feature.
> +
> +**/
> +BOOLEAN
> +IsOpalDeviceLocked(
> + OPAL_PEI_DEVICE *OpalDev,
> + BOOLEAN *BlockSidSupported
> + )
> +{
> + OPAL_SESSION Session;
> + OPAL_DISK_SUPPORT_ATTRIBUTE SupportedAttributes;
> + TCG_LOCKING_FEATURE_DESCRIPTOR LockingFeature;
> + UINT16 OpalBaseComId;
> + TCG_RESULT Ret;
> +
> + Session.Sscp = &OpalDev->Sscp;
> + Session.MediaId = 0;
> +
> + Ret = OpalGetSupportedAttributesInfo (&Session, &SupportedAttributes,
> &OpalBaseComId);
> + if (Ret != TcgResultSuccess) {
> + return FALSE;
> + }
> +
> + Session.OpalBaseComId = OpalBaseComId;
> + *BlockSidSupported = SupportedAttributes.BlockSid == 1 ? TRUE :
> FALSE;
> +
> + Ret = OpalGetLockingInfo(&Session, &LockingFeature);
> + if (Ret != TcgResultSuccess) {
> + return FALSE;
> + }
> +
> + return OpalDeviceLocked (&SupportedAttributes, &LockingFeature);
> +}
> +
> +/**
> + Unlock OPAL password for S3.
> +
> + @param[in] OpalDev Opal object to unlock.
> +
> +**/
> +VOID
> +UnlockOpalPassword (
> + IN OPAL_PEI_DEVICE *OpalDev
> + )
> +{
> + TCG_RESULT Result;
> + OPAL_SESSION Session;
> + BOOLEAN BlockSidSupport;
> + UINT32 PpStorageFlags;
> + BOOLEAN BlockSIDEnabled;
> +
> + BlockSidSupport = FALSE;
> + if (IsOpalDeviceLocked (OpalDev, &BlockSidSupport)) {
> + ZeroMem(&Session, sizeof (Session));
> + Session.Sscp = &OpalDev->Sscp;
> + Session.MediaId = 0;
> + Session.OpalBaseComId = OpalDev->Device->OpalBaseComId;
> +
> + Result = OpalUtilUpdateGlobalLockingRange (
> + &Session,
> + OpalDev->Device->Password,
> + OpalDev->Device->PasswordLength,
> + FALSE,
> + FALSE
> + );
> + DEBUG ((
> + DEBUG_INFO,
> + "%a() OpalUtilUpdateGlobalLockingRange() Result = 0x%x\n",
> + __FUNCTION__,
> + Result
> + ));
> + }
> +
> + PpStorageFlags = Tcg2PhysicalPresenceLibGetManagementFlags ();
> + if ((PpStorageFlags &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
> + BlockSIDEnabled = TRUE;
> + } else {
> + BlockSIDEnabled = FALSE;
> + }
> + if (BlockSIDEnabled && BlockSidSupport) {
> + Result = OpalBlockSid (&Session, TRUE);
> + DEBUG ((
> + DEBUG_INFO,
> + "%a() OpalBlockSid() Result = 0x%x\n",
> + __FUNCTION__,
> + Result
> + ));
> + }
> +}
> +
> +/**
> + Unlock ATA OPAL password for S3.
> +
> +**/
> +VOID
> +UnlockOpalPasswordAta (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 *DevInfo;
> + OPAL_DEVICE_ATA TempDevInfoAta;
> + OPAL_DEVICE_ATA *DevInfoAta;
> + UINTN DevInfoLengthAta;
> + UINT8 Bus;
> + UINT8 Device;
> + UINT8 Function;
> + OPAL_PEI_DEVICE OpalDev;
> + UINT8 BaseClassCode;
> + UINT8 SubClassCode;
> + UINT8 SataCmdSt;
> + AHCI_CONTEXT AhciContext;
> + UINT32 AhciBar;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + //
> + // Get ATA OPAL device info from LockBox.
> + //
> + DevInfo = (UINT8 *) &TempDevInfoAta;
> + DevInfoLengthAta = sizeof (OPAL_DEVICE_ATA);
> + Status = RestoreLockBox (&mOpalDeviceAtaGuid, DevInfo,
> &DevInfoLengthAta);
> + if (Status == EFI_BUFFER_TOO_SMALL) {
> + DevInfo = AllocatePages (EFI_SIZE_TO_PAGES (DevInfoLengthAta));
> + if (DevInfo != NULL) {
> + Status = RestoreLockBox (&mOpalDeviceAtaGuid, DevInfo,
> &DevInfoLengthAta);
> + }
> + }
> + if (EFI_ERROR (Status) || (DevInfo == NULL)) {
> + return;
> + }
> +
> + for (DevInfoAta = (OPAL_DEVICE_ATA *) DevInfo;
> + (UINTN) DevInfoAta < ((UINTN) DevInfo + DevInfoLengthAta);
> + DevInfoAta = (OPAL_DEVICE_ATA *) ((UINTN) DevInfoAta +
> DevInfoAta->Length)) {
> + Bus = DevInfoAta->Device.Bus;
> + Device = DevInfoAta->Device.Device;
> + Function = DevInfoAta->Device.Function;
> +
> + SataCmdSt = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> PCI_COMMAND_OFFSET));
> + PciWrite8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> PCI_COMMAND_OFFSET), 0x6);
> +
> + BaseClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x0B));
> + SubClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x0A));
> + if ((BaseClassCode != PCI_CLASS_MASS_STORAGE) ||
> + ((SubClassCode != PCI_CLASS_MASS_STORAGE_SATADPA) &&
> (SubClassCode != PCI_CLASS_MASS_STORAGE_RAID))) {
> + DEBUG ((DEBUG_ERROR, "%a() ClassCode/SubClassCode are not
> supported\n", __FUNCTION__));
> + } else {
> + AhciBar = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24));
> + PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24),
> DevInfoAta->BarAddr);
> +
> + ZeroMem (&AhciContext, sizeof (AHCI_CONTEXT));
> + AhciContext.AhciBar = DevInfoAta->BarAddr;
> + AhciAllocateResource (&AhciContext);
> + Status = AhciModeInitialize (&AhciContext, (UINT8)DevInfoAta->Port);
> + ASSERT_EFI_ERROR (Status);
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "%a() AhciModeInitialize() error,
> Status: %r\n", __FUNCTION__, Status));
> + }
> +
> + OpalDev.Signature = OPAL_PEI_DEVICE_SIGNATURE;
> + OpalDev.Sscp.ReceiveData = SecurityReceiveData;
> + OpalDev.Sscp.SendData = SecuritySendData;
> + OpalDev.DeviceType = OPAL_DEVICE_TYPE_ATA;
> + OpalDev.Device = (OPAL_DEVICE_COMMON *) DevInfoAta;
> + OpalDev.Context = &AhciContext;
> +
> + UnlockOpalPassword (&OpalDev);
> +
> + AhciFreeResource (&AhciContext);
> + PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24), AhciBar);
> + }
> + PciWrite8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> PCI_COMMAND_OFFSET), SataCmdSt);
> + }
> +
> + ZeroMem (DevInfo, DevInfoLengthAta);
> + if ((UINTN) DevInfo != (UINTN) &TempDevInfoAta) {
> + FreePages (DevInfo, EFI_SIZE_TO_PAGES (DevInfoLengthAta));
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Unlock NVMe OPAL password for S3.
> +
> +**/
> +VOID
> +UnlockOpalPasswordNvme (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 *DevInfo;
> + OPAL_DEVICE_NVME TempDevInfoNvme;
> + OPAL_DEVICE_NVME *DevInfoNvme;
> + UINTN DevInfoLengthNvme;
> + UINT8 Bus;
> + UINT8 Device;
> + UINT8 Function;
> + OPAL_PEI_DEVICE OpalDev;
> + UINT8 BaseClassCode;
> + UINT8 SubClassCode;
> + UINT8 ProgInt;
> + UINT8 NvmeCmdSt;
> + UINT8 *StorePcieConfDataList[16];
> + UINTN RpBase;
> + UINTN MemoryBase;
> + UINTN MemoryLength;
> + NVME_CONTEXT NvmeContext;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + //
> + // Get NVMe OPAL device info from LockBox.
> + //
> + DevInfo = (UINT8 *) &TempDevInfoNvme;
> + DevInfoLengthNvme = sizeof (OPAL_DEVICE_NVME);
> + Status = RestoreLockBox (&mOpalDeviceNvmeGuid, DevInfo,
> &DevInfoLengthNvme);
> + if (Status == EFI_BUFFER_TOO_SMALL) {
> + DevInfo = AllocatePages (EFI_SIZE_TO_PAGES (DevInfoLengthNvme));
> + if (DevInfo != NULL) {
> + Status = RestoreLockBox (&mOpalDeviceNvmeGuid, DevInfo,
> &DevInfoLengthNvme);
> + }
> + }
> + if (EFI_ERROR (Status) || (DevInfo == NULL)) {
> + return;
> + }
> +
> + for (DevInfoNvme = (OPAL_DEVICE_NVME *) DevInfo;
> + (UINTN) DevInfoNvme < ((UINTN) DevInfo + DevInfoLengthNvme);
> + DevInfoNvme = (OPAL_DEVICE_NVME *) ((UINTN) DevInfoNvme +
> DevInfoNvme->Length)) {
> + Bus = DevInfoNvme->Device.Bus;
> + Device = DevInfoNvme->Device.Device;
> + Function = DevInfoNvme->Device.Function;
> +
> + RpBase = 0;
> + NvmeCmdSt = 0;
> +
> + ///
> + /// Save original RootPort configuration space to heap
> + ///
> + RpBase = SaveRestoreRootportConfSpace (
> + DevInfoNvme,
> + TRUE, // save
> + StorePcieConfDataList
> + );
> + MemoryBase = DevInfoNvme->BarAddr;
> + MemoryLength = 0;
> + ConfigureRootPortForPcieNand (RpBase, Bus, (UINT32) MemoryBase,
> (UINT32) MemoryLength);
> +
> + ///
> + /// Enable PCIE decode for RootPort
> + ///
> + NvmeCmdSt = PciRead8 (RpBase + NVME_PCIE_PCICMD);
> + PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0x6);
> +
> + BaseClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x0B));
> + SubClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x0A));
> + ProgInt = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x09));
> + if ((BaseClassCode != PCI_CLASS_MASS_STORAGE) ||
> + (SubClassCode != PCI_CLASS_MASS_STORAGE_NVM) ||
> + (ProgInt != PCI_IF_NVMHCI)) {
> + DEBUG ((DEBUG_ERROR, "%a() ClassCode/SubClassCode/PI are not
> supported\n", __FUNCTION__));
> + } else {
> + ZeroMem (&NvmeContext, sizeof (NVME_CONTEXT));
> + NvmeContext.Nbar = DevInfoNvme->BarAddr;
> + NvmeContext.PciBase = PCI_LIB_ADDRESS (Bus, Device, Function, 0x0);
> + NvmeContext.NvmeInitWaitTime = 0;
> + NvmeContext.Nsid = DevInfoNvme->NvmeNamespaceId;
> + NvmeAllocateResource (&NvmeContext);
> + Status = NvmeControllerInit (&NvmeContext);
> +
> + OpalDev.Signature = OPAL_PEI_DEVICE_SIGNATURE;
> + OpalDev.Sscp.ReceiveData = SecurityReceiveData;
> + OpalDev.Sscp.SendData = SecuritySendData;
> + OpalDev.DeviceType = OPAL_DEVICE_TYPE_NVME;
> + OpalDev.Device = (OPAL_DEVICE_COMMON *) DevInfoNvme;
> + OpalDev.Context = &NvmeContext;
> +
> + UnlockOpalPassword (&OpalDev);
> +
> + Status = NvmeControllerExit (&NvmeContext);
> + NvmeFreeResource (&NvmeContext);
> + }
> +
> + ASSERT (RpBase != 0);
> + PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0);
> + RpBase = SaveRestoreRootportConfSpace (
> + DevInfoNvme,
> + FALSE, // restore
> + StorePcieConfDataList
> + );
> + PciWrite8 (RpBase + NVME_PCIE_PCICMD, NvmeCmdSt);
> + }
> +
> + ZeroMem (DevInfo, DevInfoLengthNvme);
> + if ((UINTN) DevInfo != (UINTN) &TempDevInfoNvme) {
> + FreePages (DevInfo, EFI_SIZE_TO_PAGES (DevInfoLengthNvme));
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Unlock OPAL password for S3.
> +
> +**/
> +VOID
> +OpalPasswordS3 (
> + VOID
> + )
> +{
> + UnlockOpalPasswordAta ();
> + UnlockOpalPasswordNvme ();
> +}
> +
> +/**
> + Entry point of the notification callback function itself within the PEIM.
> + It is to unlock OPAL password for S3.
> +
> + @param PeiServices Indirect reference to the PEI Services Table.
> + @param NotifyDescriptor Address of the notification descriptor data
> structure.
> + @param Ppi Address of the PPI that was installed.
> +
> + @return Status of the notification.
> + The status code returned from this function is ignored.
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalPasswordEndOfPeiNotify(
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
> + IN VOID *Ppi
> + )
> +{
> + EFI_STATUS Status;
> + EFI_BOOT_MODE BootMode;
> +
> + Status = PeiServicesGetBootMode (&BootMode);
> + ASSERT_EFI_ERROR (Status);
> + if (BootMode != BOOT_ON_S3_RESUME) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter at S3 resume\n", __FUNCTION__));
> +
> + OpalPasswordS3 ();
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit at S3 resume\n", __FUNCTION__));
> +
> + return EFI_SUCCESS;
> +}
> +
> +EFI_PEI_NOTIFY_DESCRIPTOR mOpalPasswordEndOfPeiNotifyDesc = {
> + (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK |
> EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
> + &gEfiEndOfPeiSignalPpiGuid,
> + OpalPasswordEndOfPeiNotify
> +};
> +
> +/**
> + Main entry for this module.
> +
> + @param FileHandle Handle of the file being invoked.
> + @param PeiServices Pointer to PEI Services table.
> +
> + @return Status from PeiServicesNotifyPpi.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalPasswordPeiInit (
> + IN EFI_PEI_FILE_HANDLE FileHandle,
> + IN CONST EFI_PEI_SERVICES **PeiServices
> + )
> +{
> + EFI_STATUS Status;
> +
> + Status = PeiServicesNotifyPpi (&mOpalPasswordEndOfPeiNotifyDesc);
> + ASSERT_EFI_ERROR (Status);
> + return Status;
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
> new file mode 100644
> index 000000000000..31aab37f5d91
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
> @@ -0,0 +1,133 @@
> +/** @file
> + Opal Password PEI driver which is used to unlock Opal Password for S3.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef _OPAL_PASSWORD_PEI_H_
> +#define _OPAL_PASSWORD_PEI_H_
> +
> +#include <PiPei.h>
> +#include <IndustryStandard/Atapi.h>
> +#include <IndustryStandard/Pci.h>
> +
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/PciLib.h>
> +#include <Library/BaseLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/MemoryAllocationLib.h>
> +#include <Library/PeimEntryPoint.h>
> +#include <Library/PeiServicesLib.h>
> +#include <Library/HobLib.h>
> +#include <Library/TimerLib.h>
> +#include <Library/LockBoxLib.h>
> +#include <Library/TcgStorageOpalLib.h>
> +#include <Library/Tcg2PhysicalPresenceLib.h>
> +
> +#include <Protocol/StorageSecurityCommand.h>
> +
> +#include <Ppi/IoMmu.h>
> +
> +#include "OpalPasswordCommon.h"
> +#include "OpalAhciMode.h"
> +#include "OpalNvmeMode.h"
> +
> +//
> +// Time out Value for ATA pass through protocol
> +//
> +#define ATA_TIMEOUT 30000000
> +
> +//
> +// The payload Length of HDD related ATA commands
> +//
> +#define HDD_PAYLOAD 512
> +//
> +// According to ATA spec, the max Length of hdd password is 32 bytes
> +//
> +#define OPAL_PASSWORD_MAX_LENGTH 32
> +
> +#pragma pack(1)
> +
> +/**
> +* Opal I/O Type utilized by the Trusted IO callback
> +*
> +* The type indicates if the I/O is a send or receive
> +*/
> +typedef enum {
> + //
> + // I/O is a TCG Trusted Send command
> + //
> + OpalSend,
> +
> + //
> + // I/O is a TCG Trusted Receive command
> + //
> + OpalRecv
> +} OPAL_IO_TYPE;
> +
> +#define OPAL_PEI_DEVICE_SIGNATURE SIGNATURE_32 ('o', 'p', 'd', 's')
> +
> +typedef struct {
> + UINTN Signature;
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL Sscp;
> + UINT8 DeviceType;
> + OPAL_DEVICE_COMMON *Device;
> + VOID *Context;
> +} OPAL_PEI_DEVICE;
> +
> +#define OPAL_PEI_DEVICE_FROM_THIS(a) CR (a, OPAL_PEI_DEVICE, Sscp,
> OPAL_PEI_DEVICE_SIGNATURE)
> +
> +#pragma pack()
> +
> +/**
> + Allocates pages that are suitable for an OperationBusMasterCommonBuffer
> or
> + OperationBusMasterCommonBuffer64 mapping.
> +
> + @param Pages The number of pages to allocate.
> + @param HostAddress A pointer to store the base system
> memory address of the
> + allocated range.
> + @param DeviceAddress The resulting map address for the bus
> master PCI controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to Unmap().
> +
> + @retval EFI_SUCCESS The requested memory pages were
> allocated.
> + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal
> attribute bits are
> + MEMORY_WRITE_COMBINE and
> MEMORY_CACHED.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The memory pages could not be
> allocated.
> +
> +**/
> +EFI_STATUS
> +IoMmuAllocateBuffer (
> + IN UINTN Pages,
> + OUT VOID **HostAddress,
> + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + );
> +
> +/**
> + Frees memory that was allocated with AllocateBuffer().
> +
> + @param Pages The number of pages to free.
> + @param HostAddress The base system memory address of the
> allocated range.
> + @param Mapping The mapping value returned from Map().
> +
> +**/
> +VOID
> +IoMmuFreeBuffer (
> + IN UINTN Pages,
> + IN VOID *HostAddress,
> + IN VOID *Mapping
> + );
> +
> +#endif // _OPAL_PASSWORD_PEI_H_
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
> new file mode 100644
> index 000000000000..81c57c36d2aa
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
> @@ -0,0 +1,63 @@
> +## @file
> +# This is a Opal Password PEI driver.
> +#
> +# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be found
> at
> +# http://opensource.org/licenses/bsd-license.php
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x00010005
> + BASE_NAME = OpalPasswordPei
> + FILE_GUID =
> DED60489-979C-4B5A-8EE4-4068B0CC38DC
> + MODULE_TYPE = PEIM
> + VERSION_STRING = 1.0
> + ENTRY_POINT = OpalPasswordPeiInit
> +
> +#
> +# The following information is for reference only and not required by the build
> tools.
> +#
> +# VALID_ARCHITECTURES = IA32 X64
> +#
> +
> +[Sources]
> + OpalPasswordPei.c
> + OpalPasswordPei.h
> + OpalPasswordCommon.h
> + OpalAhciMode.c
> + OpalAhciMode.h
> + OpalNvmeMode.c
> + OpalNvmeMode.h
> + OpalNvmeReg.h
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + SecurityPkg/SecurityPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> + PeimEntryPoint
> + PeiServicesLib
> + DebugLib
> + IoLib
> + PciLib
> + BaseLib
> + BaseMemoryLib
> + MemoryAllocationLib
> + TimerLib
> + HobLib
> + LockBoxLib
> + TcgStorageOpalLib
> + Tcg2PhysicalPresenceLib
> +
> +[Ppis]
> + gEdkiiIoMmuPpiGuid ##
> SOMETIMES_CONSUMES
> + gEfiEndOfPeiSignalPpiGuid ## NOTIFY
> +
> +[Depex]
> + gEfiPeiMasterBootModePpiGuid
> --
> 2.7.0.windows.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM device code
2018-03-08 11:44 ` Yao, Jiewen
@ 2018-03-08 11:48 ` Zeng, Star
0 siblings, 0 replies; 10+ messages in thread
From: Zeng, Star @ 2018-03-08 11:48 UTC (permalink / raw)
To: Yao, Jiewen, edk2-devel@lists.01.org
Cc: Dong, Eric, Zhang, Chao B, Zeng, Star
Got the point and agree.
Thanks for the good comment. :)
Star
-----Original Message-----
From: Yao, Jiewen
Sent: Thursday, March 8, 2018 7:44 PM
To: Zeng, Star <star.zeng@intel.com>; edk2-devel@lists.01.org
Cc: Dong, Eric <eric.dong@intel.com>; Zhang, Chao B <chao.b.zhang@intel.com>
Subject: RE: [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM device code
One minor:
> + if (InputLength == 0 || InputKey.ScanCode == SCAN_ESC) {
I prefer we also zero Unicode here. ESC just means exit, the Unicode buffer might already be filled.
> + return NULL;
> + }
> +
> + Ascii = AllocateZeroPool (PSID_CHARACTER_LENGTH + 1);
> + if (Ascii == NULL) {
> + ZeroMem (Unicode, sizeof (Unicode));
> + ZeroMem (Mask, sizeof (Mask));
> + return NULL;
> + }
With above change, Reviewed-by: Jiewen.yao@intel.com
> -----Original Message-----
> From: Zeng, Star
> Sent: Wednesday, March 7, 2018 9:19 PM
> To: edk2-devel@lists.01.org
> Cc: Zeng, Star <star.zeng@intel.com>; Yao, Jiewen <jiewen.yao@intel.com>;
> Dong, Eric <eric.dong@intel.com>; Zhang, Chao B <chao.b.zhang@intel.com>
> Subject: [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM
> device code
>
> After IOMMU is enabled in S3, original solution with SMM device
> code (OpalPasswordSmm) to unlock OPAL device for S3 will not work
> as the DMA operation will be aborted without granted DMA buffer.
> Instead, this solution is to add OpalPasswordPei to eliminate
> SMM device code, and OPAL setup UI produced by OpalPasswordDxe
> will be updated to send requests (set password, update password,
> and etc), and then the requests will be processed in next boot
> before SmmReadyToLock, password and device info will be saved to
> lock box used by OpalPasswordPei to unlock OPAL device for S3.
>
> Cc: Jiewen Yao <jiewen.yao@intel.com>
> Cc: Eric Dong <eric.dong@intel.com>
> Cc: Chao Zhang <chao.b.zhang@intel.com>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Star Zeng <star.zeng@intel.com>
> ---
> SecurityPkg/SecurityPkg.dsc | 2 +
> SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c | 398 +++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c | 1335 +++++++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h | 435 +++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c | 3003
> ++++++++++++++++++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h | 613 ++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c | 1178 ++++++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h | 380 +++
> .../Tcg/Opal/OpalPassword/OpalHiiCallbacks.c | 219 ++
> .../Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni | 84 +
> .../Tcg/Opal/OpalPassword/OpalHiiFormValues.h | 123 +
> SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c | 2144
> ++++++++++++++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h | 455 +++
> SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h | 815 ++++++
> .../Tcg/Opal/OpalPassword/OpalPasswordCommon.h | 65 +
> .../Tcg/Opal/OpalPassword/OpalPasswordDxe.inf | 81 +
> .../Tcg/Opal/OpalPassword/OpalPasswordForm.vfr | 309 ++
> .../Tcg/Opal/OpalPassword/OpalPasswordPei.c | 940 ++++++
> .../Tcg/Opal/OpalPassword/OpalPasswordPei.h | 133 +
> .../Tcg/Opal/OpalPassword/OpalPasswordPei.inf | 63 +
> 20 files changed, 12775 insertions(+)
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
> create mode 100644 SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
> create mode 100644
> SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
>
> diff --git a/SecurityPkg/SecurityPkg.dsc b/SecurityPkg/SecurityPkg.dsc
> index 65a2fe3d7967..f82703a17b82 100644
> --- a/SecurityPkg/SecurityPkg.dsc
> +++ b/SecurityPkg/SecurityPkg.dsc
> @@ -324,6 +324,8 @@ [Components.IA32, Components.X64]
> #
> SecurityPkg/Tcg/Opal/OpalPasswordDxe/OpalPasswordDxe.inf
> SecurityPkg/Tcg/Opal/OpalPasswordSmm/OpalPasswordSmm.inf
> + SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> + SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
>
> [Components.IPF]
> SecurityPkg/VariableAuthenticated/EsalVariableDxeSal/EsalVariableDxeSal.inf
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
> new file mode 100644
> index 000000000000..ef963d0e0b62
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/ComponentName.c
> @@ -0,0 +1,398 @@
> +/** @file
> + UEFI Component Name(2) protocol implementation for Opal driver.
> +
> +Copyright (c) 2016, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalDriver.h"
> +
> +//
> +// EFI Component Name Protocol
> +//
> +GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL
> gOpalComponentName = {
> + OpalEfiDriverComponentNameGetDriverName,
> + OpalEfiDriverComponentNameGetControllerName,
> + "eng"
> +};
> +
> +//
> +// EFI Component Name 2 Protocol
> +//
> +GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL
> gOpalComponentName2 = {
> + OpalEfiDriverComponentName2GetDriverName,
> + OpalEfiDriverComponentName2GetControllerName,
> + "en"
> +};
> +
> +
> +/// The name of the driver in all the languages we support.
> +GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE
> mOpalDriverNameTable[] = {
> + { LANGUAGE_RFC_3066_ENGLISH,
> (CHAR16*)EFI_DRIVER_NAME_UNICODE },
> + { LANGUAGE_ISO_639_2_ENGLISH,
> (CHAR16*)EFI_DRIVER_NAME_UNICODE },
> + { 0, 0 }
> +};
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the driver.
> +
> + This function retrieves the user readable name of a driver in the form of a
> + Unicode string. If the driver specified by This has a user readable name in
> + the language specified by Language, then a pointer to the driver name is
> + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
> + by This does not support the language specified by Language,
> + then EFI_UNSUPPORTED is returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> + in RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param DriverName[out] A pointer to the Unicode string to
> return.
> + This Unicode string is the name of the
> + driver specified by This in the language
> + specified by Language.
> +
> + @retval EFI_SUCCESS The Unicode string for the Driver specified
> by
> + This and the language specified by
> Language was
> + returned in DriverName.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER DriverName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentNameGetDriverName(
> + EFI_COMPONENT_NAME_PROTOCOL* This,
> + CHAR8* Language,
> + CHAR16** DriverName
> + )
> +{
> + return LookupUnicodeString2(
> + Language,
> + This->SupportedLanguages,
> + mOpalDriverNameTable,
> + DriverName,
> + TRUE
> + );
> +}
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the driver.
> +
> + This function retrieves the user readable name of a driver in the form of a
> + Unicode string. If the driver specified by This has a user readable name in
> + the language specified by Language, then a pointer to the driver name is
> + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
> + by This does not support the language specified by Language,
> + then EFI_UNSUPPORTED is returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> + in RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param DriverName[out] A pointer to the Unicode string to
> return.
> + This Unicode string is the name of the
> + driver specified by This in the language
> + specified by Language.
> +
> + @retval EFI_SUCCESS The Unicode string for the Driver specified
> by
> + This and the language specified by
> Language was
> + returned in DriverName.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER DriverName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentName2GetDriverName(
> + EFI_COMPONENT_NAME2_PROTOCOL* This,
> + CHAR8* Language,
> + CHAR16** DriverName
> + )
> +{
> + return LookupUnicodeString2(
> + Language,
> + This->SupportedLanguages,
> + mOpalDriverNameTable,
> + DriverName,
> + FALSE
> + );
> +}
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +GetControllerName(
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + )
> +{
> + if (Language == NULL || ControllerName == NULL || ControllerHandle ==
> NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + // don't support any controller or children names
> + return EFI_UNSUPPORTED;
> +}
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentNameGetControllerName(
> + EFI_COMPONENT_NAME_PROTOCOL* This,
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + )
> +{
> + return (GetControllerName( ControllerHandle, ChildHandle, Language,
> ControllerName));
> +}
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentName2GetControllerName(
> + EFI_COMPONENT_NAME2_PROTOCOL* This,
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + )
> +{
> + return (GetControllerName(ControllerHandle, ChildHandle, Language,
> ControllerName));
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
> new file mode 100644
> index 000000000000..550abacc9c75
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.c
> @@ -0,0 +1,1335 @@
> +/** @file
> + This driver is used for Opal Password Feature support at AHCI mode.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +
> +#include "OpalPasswordPei.h"
> +
> +/**
> + Start command for give slot on specific port.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param CommandSlot The number of CommandSlot.
> + @param Timeout The timeout Value of start.
> +
> + @retval EFI_DEVICE_ERROR The command start unsuccessfully.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_SUCCESS The command start successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciStartCommand (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT8 CommandSlot,
> + IN UINT64 Timeout
> + );
> +
> +/**
> + Stop command running for giving port
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param Timeout The timeout Value of stop.
> +
> + @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_SUCCESS The command stop successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciStopCommand (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT64 Timeout
> + );
> +
> +/**
> + Read AHCI Operation register.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The operation register offset.
> +
> + @return The register content read.
> +
> +**/
> +UINT32
> +EFIAPI
> +AhciReadReg (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset
> + )
> +{
> + UINT32 Data;
> +
> + Data = 0;
> +
> + Data = MmioRead32 (AhciBar + Offset);
> +
> + return Data;
> +}
> +
> +/**
> + Write AHCI Operation register.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The operation register offset.
> + @param Data The Data used to write down.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciWriteReg (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset,
> + IN UINT32 Data
> + )
> +{
> + MmioWrite32 (AhciBar + Offset, Data);
> +
> + return ;
> +}
> +
> +/**
> + Do AND operation with the Value of AHCI Operation register.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The operation register offset.
> + @param AndData The Data used to do AND operation.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciAndReg (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset,
> + IN UINT32 AndData
> + )
> +{
> + UINT32 Data;
> +
> + Data = AhciReadReg (AhciBar, Offset);
> +
> + Data &= AndData;
> +
> + AhciWriteReg (AhciBar, Offset, Data);
> +}
> +
> +/**
> + Do OR operation with the Value of AHCI Operation register.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The operation register offset.
> + @param OrData The Data used to do OR operation.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciOrReg (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset,
> + IN UINT32 OrData
> + )
> +{
> + UINT32 Data;
> +
> + Data = AhciReadReg (AhciBar, Offset);
> +
> + Data |= OrData;
> +
> + AhciWriteReg (AhciBar, Offset, Data);
> +}
> +
> +/**
> + Wait for memory set to the test Value.
> +
> + @param AhciBar AHCI bar address.
> + @param Offset The memory offset to test.
> + @param MaskValue The mask Value of memory.
> + @param TestValue The test Value of memory.
> + @param Timeout The time out Value for wait memory set.
> +
> + @retval EFI_DEVICE_ERROR The memory is not set.
> + @retval EFI_TIMEOUT The memory setting is time out.
> + @retval EFI_SUCCESS The memory is correct set.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciWaitMmioSet (
> + IN UINT32 AhciBar,
> + IN UINT32 Offset,
> + IN UINT32 MaskValue,
> + IN UINT32 TestValue,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Value;
> + UINT32 Delay;
> +
> + Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
> +
> + do {
> + Value = AhciReadReg (AhciBar, Offset) & MaskValue;
> +
> + if (Value == TestValue) {
> + return EFI_SUCCESS;
> + }
> +
> + //
> + // Stall for 100 microseconds.
> + //
> + MicroSecondDelay (100);
> +
> + Delay--;
> +
> + } while (Delay > 0);
> +
> + return EFI_TIMEOUT;
> +}
> +/**
> + Wait for the Value of the specified system memory set to the test Value.
> +
> + @param Address The system memory address to test.
> + @param MaskValue The mask Value of memory.
> + @param TestValue The test Value of memory.
> + @param Timeout The time out Value for wait memory set,
> uses 100ns as a unit.
> +
> + @retval EFI_TIMEOUT The system memory setting is time out.
> + @retval EFI_SUCCESS The system memory is correct set.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciWaitMemSet (
> + IN EFI_PHYSICAL_ADDRESS Address,
> + IN UINT32 MaskValue,
> + IN UINT32 TestValue,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Value;
> + UINT32 Delay;
> +
> + Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
> +
> + do {
> + //
> + // Access sytem memory to see if the Value is the tested one.
> + //
> + // The system memory pointed by Address will be updated by the
> + // SATA Host Controller, "volatile" is introduced to prevent
> + // compiler from optimizing the access to the memory address
> + // to only read once.
> + //
> + Value = *(volatile UINT32 *) (UINTN) Address;
> + Value &= MaskValue;
> +
> + if (Value == TestValue) {
> + return EFI_SUCCESS;
> + }
> +
> + //
> + // Stall for 100 microseconds.
> + //
> + MicroSecondDelay (100);
> +
> + Delay--;
> +
> + } while (Delay > 0);
> +
> + return EFI_TIMEOUT;
> +}
> +
> +/**
> + Check the memory status to the test Value.
> +
> + @param[in] Address The memory address to test.
> + @param[in] MaskValue The mask Value of memory.
> + @param[in] TestValue The test Value of memory.
> + @param[in, out] RetryTimes The retry times Value for waitting
> memory set. If 0, then just try once.
> +
> + @retval EFI_NOTREADY The memory is not set.
> + @retval EFI_TIMEOUT The memory setting retry times out.
> + @retval EFI_SUCCESS The memory is correct set.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciCheckMemSet (
> + IN UINTN Address,
> + IN UINT32 MaskValue,
> + IN UINT32 TestValue,
> + IN OUT UINTN *RetryTimes OPTIONAL
> + )
> +{
> + UINT32 Value;
> +
> + if (RetryTimes != NULL) {
> + (*RetryTimes)--;
> + }
> +
> + Value = *(volatile UINT32 *) Address;
> + Value &= MaskValue;
> +
> + if (Value == TestValue) {
> + return EFI_SUCCESS;
> + }
> +
> + if ((RetryTimes != NULL) && (*RetryTimes == 0)) {
> + return EFI_TIMEOUT;
> + } else {
> + return EFI_NOT_READY;
> + }
> +}
> +
> +/**
> + Clear the port interrupt and error status. It will also clear
> + HBA interrupt status.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciClearPortStatus (
> + IN UINT32 AhciBar,
> + IN UINT8 Port
> + )
> +{
> + UINT32 Offset;
> +
> + //
> + // Clear any error status
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SERR;
> + AhciWriteReg (AhciBar, Offset, AhciReadReg (AhciBar, Offset));
> +
> + //
> + // Clear any port interrupt status
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_IS;
> + AhciWriteReg (AhciBar, Offset, AhciReadReg (AhciBar, Offset));
> +
> + //
> + // Clear any HBA interrupt status
> + //
> + AhciWriteReg (AhciBar, EFI_AHCI_IS_OFFSET, AhciReadReg (AhciBar,
> EFI_AHCI_IS_OFFSET));
> +}
> +
> +/**
> + Enable the FIS running for giving port.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param Timeout The timeout Value of enabling FIS.
> +
> + @retval EFI_DEVICE_ERROR The FIS enable setting fails.
> + @retval EFI_TIMEOUT The FIS enable setting is time out.
> + @retval EFI_SUCCESS The FIS enable successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciEnableFisReceive (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Offset;
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_FRE);
> +
> + return AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + EFI_AHCI_PORT_CMD_FR,
> + EFI_AHCI_PORT_CMD_FR,
> + Timeout
> + );
> +}
> +
> +/**
> + Disable the FIS running for giving port.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param Timeout The timeout Value of disabling FIS.
> +
> + @retval EFI_DEVICE_ERROR The FIS disable setting fails.
> + @retval EFI_TIMEOUT The FIS disable setting is time out.
> + @retval EFI_UNSUPPORTED The port is in running state.
> + @retval EFI_SUCCESS The FIS disable successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciDisableFisReceive (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Offset;
> + UINT32 Data;
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + Data = AhciReadReg (AhciBar, Offset);
> +
> + //
> + // Before disabling Fis receive, the DMA engine of the port should NOT be in
> running status.
> + //
> + if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) != 0) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + //
> + // Check if the Fis receive DMA engine for the port is running.
> + //
> + if ((Data & EFI_AHCI_PORT_CMD_FR) != EFI_AHCI_PORT_CMD_FR) {
> + return EFI_SUCCESS;
> + }
> +
> + AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_FRE));
> +
> + return AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + EFI_AHCI_PORT_CMD_FR,
> + 0,
> + Timeout
> + );
> +}
> +
> +/**
> + Build the command list, command table and prepare the fis receiver.
> +
> + @param AhciContext The pointer to the AHCI_CONTEXT.
> + @param Port The number of port.
> + @param PortMultiplier The timeout Value of stop.
> + @param CommandFis The control fis will be used for the
> transfer.
> + @param CommandList The command list will be used for the
> transfer.
> + @param AtapiCommand The atapi command will be used for
> the transfer.
> + @param AtapiCommandLength The Length of the atapi command.
> + @param CommandSlotNumber The command slot will be used for
> the transfer.
> + @param DataPhysicalAddr The pointer to the Data Buffer pci bus
> master address.
> + @param DataLength The Data count to be transferred.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciBuildCommand (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN EFI_AHCI_COMMAND_FIS *CommandFis,
> + IN EFI_AHCI_COMMAND_LIST *CommandList,
> + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
> + IN UINT8 AtapiCommandLength,
> + IN UINT8 CommandSlotNumber,
> + IN OUT VOID *DataPhysicalAddr,
> + IN UINT64 DataLength
> + )
> +{
> + EFI_AHCI_REGISTERS *AhciRegisters;
> + UINT32 AhciBar;
> + UINT64 BaseAddr;
> + UINT64 PrdtNumber;
> + UINTN RemainedData;
> + UINTN MemAddr;
> + DATA_64 Data64;
> + UINT32 Offset;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> + AhciBar = AhciContext->AhciBar;
> +
> + //
> + // Filling the PRDT
> + //
> + PrdtNumber = DivU64x32 (DataLength + EFI_AHCI_MAX_DATA_PER_PRDT -
> 1, EFI_AHCI_MAX_DATA_PER_PRDT);
> +
> + //
> + // According to AHCI 1.3 spec, a PRDT entry can point to a maximum 4MB
> Data block.
> + // It also limits that the maximum amount of the PRDT entry in the command
> table
> + // is 65535.
> + //
> + ASSERT (PrdtNumber <= 1);
> +
> + Data64.Uint64 = (UINTN) (AhciRegisters->AhciRFis);
> +
> + BaseAddr = Data64.Uint64;
> +
> + ZeroMem ((VOID *)((UINTN) BaseAddr), sizeof (EFI_AHCI_RECEIVED_FIS));
> +
> + ZeroMem (AhciRegisters->AhciCommandTable, sizeof
> (EFI_AHCI_COMMAND_TABLE));
> +
> + CommandFis->AhciCFisPmNum = PortMultiplier;
> +
> + CopyMem (&AhciRegisters->AhciCommandTable->CommandFis,
> CommandFis, sizeof (EFI_AHCI_COMMAND_FIS));
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + if (AtapiCommand != NULL) {
> + CopyMem (
> + &AhciRegisters->AhciCommandTable->AtapiCmd,
> + AtapiCommand,
> + AtapiCommandLength
> + );
> +
> + CommandList->AhciCmdA = 1;
> + CommandList->AhciCmdP = 1;
> +
> + AhciOrReg (AhciBar, Offset, (EFI_AHCI_PORT_CMD_DLAE |
> EFI_AHCI_PORT_CMD_ATAPI));
> + } else {
> + AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_DLAE |
> EFI_AHCI_PORT_CMD_ATAPI));
> + }
> +
> + RemainedData = (UINTN) DataLength;
> + MemAddr = (UINTN) DataPhysicalAddr;
> + CommandList->AhciCmdPrdtl = (UINT32)PrdtNumber;
> +
> + AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbc =
> (UINT32)RemainedData - 1;
> +
> + Data64.Uint64 = (UINT64)MemAddr;
> + AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDba =
> Data64.Uint32.Lower32;
> + AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtDbau =
> Data64.Uint32.Upper32;
> +
> + //
> + // Set the last PRDT to Interrupt On Complete
> + //
> + AhciRegisters->AhciCommandTable->PrdtTable.AhciPrdtIoc = 1;
> +
> + CopyMem (
> + (VOID *) ((UINTN) AhciRegisters->AhciCmdList + (UINTN)
> CommandSlotNumber * sizeof (EFI_AHCI_COMMAND_LIST)),
> + CommandList,
> + sizeof (EFI_AHCI_COMMAND_LIST)
> + );
> +
> + Data64.Uint64 = (UINT64)(UINTN) AhciRegisters->AhciCommandTable;
> + AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtba =
> Data64.Uint32.Lower32;
> + AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdCtbau =
> Data64.Uint32.Upper32;
> + AhciRegisters->AhciCmdList[CommandSlotNumber].AhciCmdPmp =
> PortMultiplier;
> +
> +}
> +
> +/**
> + Buid a command FIS.
> +
> + @param CmdFis A pointer to the EFI_AHCI_COMMAND_FIS
> Data structure.
> + @param AtaCommandBlock A pointer to the AhciBuildCommandFis
> Data structure.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciBuildCommandFis (
> + IN OUT EFI_AHCI_COMMAND_FIS *CmdFis,
> + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock
> + )
> +{
> + ZeroMem (CmdFis, sizeof (EFI_AHCI_COMMAND_FIS));
> +
> + CmdFis->AhciCFisType = EFI_AHCI_FIS_REGISTER_H2D;
> + //
> + // Indicator it's a command
> + //
> + CmdFis->AhciCFisCmdInd = 0x1;
> + CmdFis->AhciCFisCmd = AtaCommandBlock->AtaCommand;
> +
> + CmdFis->AhciCFisFeature = AtaCommandBlock->AtaFeatures;
> + CmdFis->AhciCFisFeatureExp = AtaCommandBlock->AtaFeaturesExp;
> +
> + CmdFis->AhciCFisSecNum = AtaCommandBlock->AtaSectorNumber;
> + CmdFis->AhciCFisSecNumExp =
> AtaCommandBlock->AtaSectorNumberExp;
> +
> + CmdFis->AhciCFisClyLow = AtaCommandBlock->AtaCylinderLow;
> + CmdFis->AhciCFisClyLowExp = AtaCommandBlock->AtaCylinderLowExp;
> +
> + CmdFis->AhciCFisClyHigh = AtaCommandBlock->AtaCylinderHigh;
> + CmdFis->AhciCFisClyHighExp = AtaCommandBlock->AtaCylinderHighExp;
> +
> + CmdFis->AhciCFisSecCount = AtaCommandBlock->AtaSectorCount;
> + CmdFis->AhciCFisSecCountExp = AtaCommandBlock->AtaSectorCountExp;
> +
> + CmdFis->AhciCFisDevHead = (UINT8)
> (AtaCommandBlock->AtaDeviceHead | 0xE0);
> +}
> +
> +/**
> + Start a PIO Data transfer on specific port.
> +
> + @param AhciContext The pointer to the AHCI_CONTEXT.
> + @param Port The number of port.
> + @param PortMultiplier The timeout Value of stop.
> + @param AtapiCommand The atapi command will be used for the
> transfer.
> + @param AtapiCommandLength The Length of the atapi command.
> + @param Read The transfer direction.
> + @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
> + @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
> + @param MemoryAddr The pointer to the Data Buffer.
> + @param DataCount The Data count to be transferred.
> + @param Timeout The timeout Value of non Data transfer.
> +
> + @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error
> occurs.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_UNSUPPORTED The device is not ready for transfer.
> + @retval EFI_SUCCESS The PIO Data transfer executes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciPioTransfer (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
> + IN UINT8 AtapiCommandLength,
> + IN BOOLEAN Read,
> + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
> + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
> + IN OUT VOID *MemoryAddr,
> + IN UINT32 DataCount,
> + IN UINT64 Timeout
> + )
> +{
> + EFI_STATUS Status;
> + EFI_AHCI_REGISTERS *AhciRegisters;
> + UINT32 AhciBar;
> + UINT32 FisBaseAddr;
> + UINT32 Offset;
> + UINT32 Delay;
> + EFI_AHCI_COMMAND_FIS CFis;
> + EFI_AHCI_COMMAND_LIST CmdList;
> + UINT32 PortTfd;
> + UINT32 PrdCount;
> + UINT32 OldRfisLo;
> + UINT32 OldRfisHi;
> + UINT32 OldCmdListLo;
> + UINT32 OldCmdListHi;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> + AhciBar = AhciContext->AhciBar;
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FB;
> + OldRfisLo = AhciReadReg (AhciBar, Offset);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FBU;
> + OldRfisHi = AhciReadReg (AhciBar, Offset);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FB;
> + AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciRFis);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FBU;
> + AhciWriteReg (AhciBar, Offset, 0);
> +
> + //
> + // Single task envrionment, we only use one command table for all port
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLB;
> + OldCmdListLo = AhciReadReg (AhciBar, Offset);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLBU;
> + OldCmdListHi = AhciReadReg (AhciBar, Offset);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLB;
> + AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciCmdList);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLBU;
> + AhciWriteReg (AhciBar, Offset, 0);
> +
> + //
> + // Package read needed
> + //
> + AhciBuildCommandFis (&CFis, AtaCommandBlock);
> +
> + ZeroMem (&CmdList, sizeof (EFI_AHCI_COMMAND_LIST));
> +
> + CmdList.AhciCmdCfl = EFI_AHCI_FIS_REGISTER_H2D_LENGTH / 4;
> + CmdList.AhciCmdW = Read ? 0 : 1;
> +
> + AhciBuildCommand (
> + AhciContext,
> + Port,
> + PortMultiplier,
> + &CFis,
> + &CmdList,
> + AtapiCommand,
> + AtapiCommandLength,
> + 0,
> + MemoryAddr,
> + DataCount
> + );
> +
> + Status = AhciStartCommand (
> + AhciBar,
> + Port,
> + 0,
> + Timeout
> + );
> + if (EFI_ERROR (Status)) {
> + goto Exit;
> + }
> +
> + //
> + // Checking the status and wait the driver sending Data
> + //
> + FisBaseAddr = (UINT32)(UINTN)AhciRegisters->AhciRFis;
> + if (Read && (AtapiCommand == 0)) {
> + //
> + // Wait device sends the PIO setup fis before Data transfer
> + //
> + Status = EFI_TIMEOUT;
> + Delay = (UINT32) (DivU64x32 (Timeout, 1000) + 1);
> + do {
> + Offset = FisBaseAddr + EFI_AHCI_PIO_FIS_OFFSET;
> +
> + Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK,
> EFI_AHCI_FIS_PIO_SETUP, 0);
> + if (!EFI_ERROR (Status)) {
> + Offset = EFI_AHCI_PORT_START + Port *
> EFI_AHCI_PORT_REG_WIDTH + EFI_AHCI_PORT_TFD;
> + PortTfd = AhciReadReg (AhciBar, (UINT32) Offset);
> + //
> + // PxTFD will be updated if there is a D2H or SetupFIS received.
> + // For PIO IN transfer, D2H means a device error. Therefore we only
> need to check the TFD after receiving a SetupFIS.
> + //
> + if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
> + Status = EFI_DEVICE_ERROR;
> + break;
> + }
> +
> + PrdCount = *(volatile UINT32 *)
> (&(AhciRegisters->AhciCmdList[0].AhciCmdPrdbc));
> + if (PrdCount == DataCount) {
> + break;
> + }
> + }
> +
> + Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
> + Status = AhciCheckMemSet (Offset, EFI_AHCI_FIS_TYPE_MASK,
> EFI_AHCI_FIS_REGISTER_D2H, 0);
> + if (!EFI_ERROR (Status)) {
> + Status = EFI_DEVICE_ERROR;
> + break;
> + }
> +
> + //
> + // Stall for 100 microseconds.
> + //
> + MicroSecondDelay(100);
> +
> + Delay--;
> + } while (Delay > 0);
> + } else {
> + //
> + // Wait for D2H Fis is received
> + //
> + Offset = FisBaseAddr + EFI_AHCI_D2H_FIS_OFFSET;
> + Status = AhciWaitMemSet (
> + Offset,
> + EFI_AHCI_FIS_TYPE_MASK,
> + EFI_AHCI_FIS_REGISTER_D2H,
> + Timeout
> + );
> +
> + if (EFI_ERROR (Status)) {
> + goto Exit;
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_TFD;
> + PortTfd = AhciReadReg (AhciBar, (UINT32) Offset);
> + if ((PortTfd & EFI_AHCI_PORT_TFD_ERR) != 0) {
> + Status = EFI_DEVICE_ERROR;
> + }
> + }
> +
> +Exit:
> + AhciStopCommand (
> + AhciBar,
> + Port,
> + Timeout
> + );
> +
> + AhciDisableFisReceive (
> + AhciBar,
> + Port,
> + Timeout
> + );
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FB;
> + AhciWriteReg (AhciBar, Offset, OldRfisLo);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FBU;
> + AhciWriteReg (AhciBar, Offset, OldRfisHi);
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLB;
> + AhciWriteReg (AhciBar, Offset, OldCmdListLo);
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLBU;
> + AhciWriteReg (AhciBar, Offset, OldCmdListHi);
> +
> + return Status;
> +}
> +
> +/**
> + Stop command running for giving port
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param Timeout The timeout Value of stop.
> +
> + @retval EFI_DEVICE_ERROR The command stop unsuccessfully.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_SUCCESS The command stop successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciStopCommand (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Offset;
> + UINT32 Data;
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + Data = AhciReadReg (AhciBar, Offset);
> +
> + if ((Data & (EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_CR)) == 0) {
> + return EFI_SUCCESS;
> + }
> +
> + if ((Data & EFI_AHCI_PORT_CMD_ST) != 0) {
> + AhciAndReg (AhciBar, Offset, (UINT32)~(EFI_AHCI_PORT_CMD_ST));
> + }
> +
> + return AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + EFI_AHCI_PORT_CMD_CR,
> + 0,
> + Timeout
> + );
> +}
> +
> +/**
> + Start command for give slot on specific port.
> +
> + @param AhciBar AHCI bar address.
> + @param Port The number of port.
> + @param CommandSlot The number of CommandSlot.
> + @param Timeout The timeout Value of start.
> +
> + @retval EFI_DEVICE_ERROR The command start unsuccessfully.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_SUCCESS The command start successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciStartCommand (
> + IN UINT32 AhciBar,
> + IN UINT8 Port,
> + IN UINT8 CommandSlot,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 CmdSlotBit;
> + EFI_STATUS Status;
> + UINT32 PortStatus;
> + UINT32 StartCmd;
> + UINT32 PortTfd;
> + UINT32 Offset;
> + UINT32 Capability;
> +
> + //
> + // Collect AHCI controller information
> + //
> + Capability = AhciReadReg(AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
> +
> + CmdSlotBit = (UINT32) (1 << CommandSlot);
> +
> + AhciClearPortStatus (
> + AhciBar,
> + Port
> + );
> +
> + Status = AhciEnableFisReceive (
> + AhciBar,
> + Port,
> + Timeout
> + );
> +
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + PortStatus = AhciReadReg (AhciBar, Offset);
> +
> + StartCmd = 0;
> + if ((PortStatus & EFI_AHCI_PORT_CMD_ALPE) != 0) {
> + StartCmd = AhciReadReg (AhciBar, Offset);
> + StartCmd &= ~EFI_AHCI_PORT_CMD_ICC_MASK;
> + StartCmd |= EFI_AHCI_PORT_CMD_ACTIVE;
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_TFD;
> + PortTfd = AhciReadReg (AhciBar, Offset);
> +
> + if ((PortTfd & (EFI_AHCI_PORT_TFD_BSY | EFI_AHCI_PORT_TFD_DRQ)) != 0)
> {
> + if ((Capability & BIT24) != 0) {
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH
> + EFI_AHCI_PORT_CMD;
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_COL);
> +
> + AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + EFI_AHCI_PORT_CMD_COL,
> + 0,
> + Timeout
> + );
> + }
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_ST | StartCmd);
> +
> + //
> + // Setting the command
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SACT;
> + AhciAndReg (AhciBar, Offset, 0);
> + AhciOrReg (AhciBar, Offset, CmdSlotBit);
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CI;
> + AhciAndReg (AhciBar, Offset, 0);
> + AhciOrReg (AhciBar, Offset, CmdSlotBit);
> + return EFI_SUCCESS;
> +}
> +
> +
> +/**
> + Do AHCI HBA reset.
> +
> + @param[in] AhciBar AHCI bar address.
> + @param[in] Timeout The timeout Value of reset.
> +
> + @retval EFI_DEVICE_ERROR AHCI controller is failed to complete
> hardware reset.
> + @retval EFI_TIMEOUT The reset operation is time out.
> + @retval EFI_SUCCESS AHCI controller is reset successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciReset (
> + IN UINT32 AhciBar,
> + IN UINT64 Timeout
> + )
> +{
> + UINT32 Delay;
> + UINT32 Value;
> + UINT32 Capability;
> +
> + //
> + // Collect AHCI controller information
> + //
> + Capability = AhciReadReg (AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
> +
> + //
> + // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only
> is not set
> + //
> + if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
> + AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
> + }
> +
> + AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_RESET);
> +
> + Delay = (UINT32) (DivU64x32(Timeout, 1000) + 1);
> +
> + do {
> + Value = AhciReadReg(AhciBar, EFI_AHCI_GHC_OFFSET);
> + if ((Value & EFI_AHCI_GHC_RESET) == 0) {
> + return EFI_SUCCESS;
> + }
> +
> + //
> + // Stall for 100 microseconds.
> + //
> + MicroSecondDelay(100);
> +
> + Delay--;
> + } while (Delay > 0);
> +
> + return EFI_TIMEOUT;
> +
> +
> +}
> +
> +/**
> + Send Buffer cmd to specific device.
> +
> + @param[in] AhciContext The pointer to the AHCI_CONTEXT.
> + @param[in] Port The port number of attached ATA
> device.
> + @param[in] PortMultiplier The port number of port multiplier of
> attached ATA device.
> + @param[in, out] Buffer The Data Buffer to store IDENTIFY
> PACKET Data.
> +
> + @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_UNSUPPORTED The device is not ready for executing.
> + @retval EFI_SUCCESS The cmd executes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciIdentify (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN OUT ATA_IDENTIFY_DATA *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
> +
> + if (AhciContext == NULL || Buffer == NULL) {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + ZeroMem (&AtaCommandBlock, sizeof (EFI_ATA_COMMAND_BLOCK));
> +
> + AtaCommandBlock.AtaCommand = ATA_CMD_IDENTIFY_DRIVE;
> + AtaCommandBlock.AtaSectorCount = 1;
> +
> + Status = AhciPioTransfer (
> + AhciContext,
> + Port,
> + PortMultiplier,
> + NULL,
> + 0,
> + TRUE,
> + &AtaCommandBlock,
> + NULL,
> + Buffer,
> + sizeof (ATA_IDENTIFY_DATA),
> + ATA_TIMEOUT
> + );
> +
> + return Status;
> +}
> +
> +/**
> + Allocate transfer-related data struct which is used at AHCI mode.
> +
> + @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
> +
> + @retval EFI_OUT_OF_RESOURCE No enough resource.
> + @retval EFI_SUCCESS Successful to allocate resource.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciAllocateResource (
> + IN OUT AHCI_CONTEXT *AhciContext
> + )
> +{
> + EFI_STATUS Status;
> + EFI_AHCI_REGISTERS *AhciRegisters;
> + EFI_PHYSICAL_ADDRESS DeviceAddress;
> + VOID *Base;
> + VOID *Mapping;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> +
> + //
> + // Allocate resources required by AHCI host controller.
> + //
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + AhciRegisters->AhciRFisMapping = Mapping;
> + AhciRegisters->AhciRFis = Base;
> + ZeroMem (AhciRegisters->AhciRFis, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES
> (sizeof (EFI_AHCI_RECEIVED_FIS)));
> +
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciRFisMapping
> + );
> + AhciRegisters->AhciRFis = NULL;
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + AhciRegisters->AhciCmdListMapping = Mapping;
> + AhciRegisters->AhciCmdList = Base;
> + ZeroMem (AhciRegisters->AhciCmdList, EFI_PAGE_SIZE *
> EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)));
> +
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciRFisMapping
> + );
> + AhciRegisters->AhciRFis = NULL;
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
> + AhciRegisters->AhciCmdList,
> + AhciRegisters->AhciCmdListMapping
> + );
> + AhciRegisters->AhciCmdList = NULL;
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + AhciRegisters->AhciCommandTableMapping = Mapping;
> + AhciRegisters->AhciCommandTable = Base;
> + ZeroMem (AhciRegisters->AhciCommandTable, EFI_PAGE_SIZE *
> EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)));
> +
> + //
> + // Allocate resources for data transfer.
> + //
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (HDD_PAYLOAD),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciRFisMapping
> + );
> + AhciRegisters->AhciRFis = NULL;
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
> + AhciRegisters->AhciCmdList,
> + AhciRegisters->AhciCmdListMapping
> + );
> + AhciRegisters->AhciCmdList = NULL;
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciCommandTable,
> + AhciRegisters->AhciCommandTableMapping
> + );
> + AhciRegisters->AhciCommandTable = NULL;
> +
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + AhciContext->BufferMapping = Mapping;
> + AhciContext->Buffer = Base;
> + ZeroMem (AhciContext->Buffer, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES
> (HDD_PAYLOAD));
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "%a() AhciContext 0x%x 0x%x 0x%x 0x%x\n",
> + __FUNCTION__,
> + AhciContext->Buffer,
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciCmdList,
> + AhciRegisters->AhciCommandTable
> + ));
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Free allocated transfer-related data struct which is used at AHCI mode.
> +
> + @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciFreeResource (
> + IN OUT AHCI_CONTEXT *AhciContext
> + )
> +{
> + EFI_AHCI_REGISTERS *AhciRegisters;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> +
> + if (AhciRegisters->AhciRFis != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_RECEIVED_FIS)),
> + AhciRegisters->AhciRFis,
> + AhciRegisters->AhciRFisMapping
> + );
> + AhciRegisters->AhciRFis = NULL;
> + }
> +
> + if (AhciRegisters->AhciCmdList != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_LIST)),
> + AhciRegisters->AhciCmdList,
> + AhciRegisters->AhciCmdListMapping
> + );
> + AhciRegisters->AhciCmdList = NULL;
> + }
> +
> + if (AhciRegisters->AhciCommandTable != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (sizeof (EFI_AHCI_COMMAND_TABLE)),
> + AhciRegisters->AhciCommandTable,
> + AhciRegisters->AhciCommandTableMapping
> + );
> + AhciRegisters->AhciCommandTable = NULL;
> + }
> +
> + if (AhciContext->Buffer != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (HDD_PAYLOAD),
> + AhciContext->Buffer,
> + AhciContext->BufferMapping
> + );
> + AhciContext->Buffer = NULL;
> + }
> +}
> +
> +/**
> + Initialize ATA host controller at AHCI mode.
> +
> + The function is designed to initialize ATA host controller.
> +
> + @param[in] AhciContext The pointer to the AHCI_CONTEXT.
> + @param[in] Port The port number to do initialization.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciModeInitialize (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port
> + )
> +{
> + EFI_STATUS Status;
> + EFI_AHCI_REGISTERS *AhciRegisters;
> + UINT32 AhciBar;
> + UINT32 Capability;
> + UINT32 Offset;
> + UINT32 Data;
> + UINT32 PhyDetectDelay;
> +
> + AhciRegisters = &AhciContext->AhciRegisters;
> + AhciBar = AhciContext->AhciBar;
> +
> + Status = AhciReset (AhciBar, ATA_TIMEOUT);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // Collect AHCI controller information
> + //
> + Capability = AhciReadReg (AhciBar, EFI_AHCI_CAPABILITY_OFFSET);
> +
> + //
> + // Enable AE before accessing any AHCI registers if Supports AHCI Mode Only
> is not set
> + //
> + if ((Capability & EFI_AHCI_CAP_SAM) == 0) {
> + AhciOrReg (AhciBar, EFI_AHCI_GHC_OFFSET, EFI_AHCI_GHC_ENABLE);
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_FB;
> + AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciRFis);
> +
> + //
> + // Single task envrionment, we only use one command table for all port
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CLB;
> + AhciWriteReg (AhciBar, Offset, (UINT32)(UINTN)AhciRegisters->AhciCmdList);
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_CMD;
> + Data = AhciReadReg (AhciBar, Offset);
> + if ((Data & EFI_AHCI_PORT_CMD_CPD) != 0) {
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_POD);
> + }
> +
> + if ((Capability & BIT27) != 0) {
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_CMD_SUD);
> + }
> +
> + //
> + // Disable aggressive power management.
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SCTL;
> + AhciOrReg (AhciBar, Offset, EFI_AHCI_PORT_SCTL_IPM_INIT);
> + //
> + // Disable the reporting of the corresponding interrupt to system software.
> + //
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_IE;
> + AhciAndReg (AhciBar, Offset, 0);
> +
> + Status = AhciEnableFisReceive (
> + AhciBar,
> + Port,
> + 5000000
> + );
> + ASSERT_EFI_ERROR (Status);
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + //
> + // According to SATA1.0a spec section 5.2, we need to wait for PxTFD.BSY
> and PxTFD.DRQ
> + // and PxTFD.ERR to be zero. The maximum wait time is 16s which is defined
> at ATA spec.
> + //
> + PhyDetectDelay = 16 * 1000;
> + do {
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SERR;
> + if (AhciReadReg(AhciBar, Offset) != 0) {
> + AhciWriteReg (AhciBar, Offset, AhciReadReg(AhciBar, Offset));
> + }
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_TFD;
> +
> + Data = AhciReadReg (AhciBar, Offset) & EFI_AHCI_PORT_TFD_MASK;
> + if (Data == 0) {
> + break;
> + }
> +
> + MicroSecondDelay (1000);
> + PhyDetectDelay--;
> + } while (PhyDetectDelay > 0);
> +
> + if (PhyDetectDelay == 0) {
> + return EFI_NOT_FOUND;
> + }
> +
> + Offset = EFI_AHCI_PORT_START + Port * EFI_AHCI_PORT_REG_WIDTH +
> EFI_AHCI_PORT_SIG;
> + Status = AhciWaitMmioSet (
> + AhciBar,
> + Offset,
> + 0x0000FFFF,
> + 0x00000101,
> + 160000000
> + );
> +
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> +
> + return Status;
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
> new file mode 100644
> index 000000000000..b1d6ed13d5b9
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalAhciMode.h
> @@ -0,0 +1,435 @@
> +/** @file
> + Header file for AHCI mode of ATA host controller.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +
> +#ifndef __OPAL_PASSWORD_AHCI_MODE_H__
> +#define __OPAL_PASSWORD_AHCI_MODE_H__
> +
> +//
> +// OPAL LIBRARY CALLBACKS
> +//
> +#define ATA_COMMAND_TRUSTED_RECEIVE 0x5C
> +#define ATA_COMMAND_TRUSTED_SEND 0x5E
> +
> +//
> +// ATA TRUSTED commands express transfer Length in 512 byte multiple
> +//
> +#define ATA_TRUSTED_TRANSFER_LENGTH_MULTIPLE 512
> +#define ATA_DEVICE_LBA 0x40 ///< Set for
> commands with LBA (rather than CHS) addresses
> +
> +
> +#define EFI_AHCI_BAR_INDEX 0x05
> +
> +#define EFI_AHCI_CAPABILITY_OFFSET 0x0000
> +#define EFI_AHCI_CAP_SAM BIT18
> +#define EFI_AHCI_GHC_OFFSET 0x0004
> +#define EFI_AHCI_GHC_RESET BIT0
> +#define EFI_AHCI_GHC_IE BIT1
> +#define EFI_AHCI_GHC_ENABLE BIT31
> +#define EFI_AHCI_IS_OFFSET 0x0008
> +#define EFI_AHCI_PI_OFFSET 0x000C
> +
> +typedef struct {
> + UINT32 Lower32;
> + UINT32 Upper32;
> +} DATA_32;
> +
> +typedef union {
> + DATA_32 Uint32;
> + UINT64 Uint64;
> +} DATA_64;
> +
> +//
> +// Each PRDT entry can point to a memory block up to 4M byte
> +//
> +#define EFI_AHCI_MAX_DATA_PER_PRDT 0x400000
> +
> +#define EFI_AHCI_FIS_REGISTER_H2D 0x27 //Register
> FIS - Host to Device
> +#define EFI_AHCI_FIS_REGISTER_H2D_LENGTH 20
> +#define EFI_AHCI_FIS_REGISTER_D2H 0x34 //Register
> FIS - Device to Host
> +#define EFI_AHCI_FIS_REGISTER_D2H_LENGTH 20
> +#define EFI_AHCI_FIS_DMA_ACTIVATE 0x39 //DMA
> Activate FIS - Device to Host
> +#define EFI_AHCI_FIS_DMA_ACTIVATE_LENGTH 4
> +#define EFI_AHCI_FIS_DMA_SETUP 0x41 //DMA
> Setup FIS - Bi-directional
> +#define EFI_AHCI_FIS_DMA_SETUP_LENGTH 28
> +#define EFI_AHCI_FIS_DATA 0x46 //Data FIS -
> Bi-directional
> +#define EFI_AHCI_FIS_BIST 0x58 //BIST
> Activate FIS - Bi-directional
> +#define EFI_AHCI_FIS_BIST_LENGTH 12
> +#define EFI_AHCI_FIS_PIO_SETUP 0x5F //PIO Setup
> FIS - Device to Host
> +#define EFI_AHCI_FIS_PIO_SETUP_LENGTH 20
> +#define EFI_AHCI_FIS_SET_DEVICE 0xA1 //Set Device
> Bits FIS - Device to Host
> +#define EFI_AHCI_FIS_SET_DEVICE_LENGTH 8
> +
> +#define EFI_AHCI_D2H_FIS_OFFSET 0x40
> +#define EFI_AHCI_DMA_FIS_OFFSET 0x00
> +#define EFI_AHCI_PIO_FIS_OFFSET 0x20
> +#define EFI_AHCI_SDB_FIS_OFFSET 0x58
> +#define EFI_AHCI_FIS_TYPE_MASK 0xFF
> +#define EFI_AHCI_U_FIS_OFFSET 0x60
> +
> +//
> +// Port register
> +//
> +#define EFI_AHCI_PORT_START 0x0100
> +#define EFI_AHCI_PORT_REG_WIDTH 0x0080
> +#define EFI_AHCI_PORT_CLB 0x0000
> +#define EFI_AHCI_PORT_CLBU 0x0004
> +#define EFI_AHCI_PORT_FB 0x0008
> +#define EFI_AHCI_PORT_FBU 0x000C
> +#define EFI_AHCI_PORT_IS 0x0010
> +#define EFI_AHCI_PORT_IS_DHRS BIT0
> +#define EFI_AHCI_PORT_IS_PSS BIT1
> +#define EFI_AHCI_PORT_IS_SSS BIT2
> +#define EFI_AHCI_PORT_IS_SDBS BIT3
> +#define EFI_AHCI_PORT_IS_UFS BIT4
> +#define EFI_AHCI_PORT_IS_DPS BIT5
> +#define EFI_AHCI_PORT_IS_PCS BIT6
> +#define EFI_AHCI_PORT_IS_DIS BIT7
> +#define EFI_AHCI_PORT_IS_PRCS BIT22
> +#define EFI_AHCI_PORT_IS_IPMS BIT23
> +#define EFI_AHCI_PORT_IS_OFS BIT24
> +#define EFI_AHCI_PORT_IS_INFS BIT26
> +#define EFI_AHCI_PORT_IS_IFS BIT27
> +#define EFI_AHCI_PORT_IS_HBDS BIT28
> +#define EFI_AHCI_PORT_IS_HBFS BIT29
> +#define EFI_AHCI_PORT_IS_TFES BIT30
> +#define EFI_AHCI_PORT_IS_CPDS BIT31
> +#define EFI_AHCI_PORT_IS_CLEAR 0xFFFFFFFF
> +#define EFI_AHCI_PORT_IS_FIS_CLEAR 0x0000000F
> +
> +#define EFI_AHCI_PORT_IE 0x0014
> +#define EFI_AHCI_PORT_CMD 0x0018
> +#define EFI_AHCI_PORT_CMD_ST_MASK 0xFFFFFFFE
> +#define EFI_AHCI_PORT_CMD_ST BIT0
> +#define EFI_AHCI_PORT_CMD_SUD BIT1
> +#define EFI_AHCI_PORT_CMD_POD BIT2
> +#define EFI_AHCI_PORT_CMD_COL BIT3
> +#define EFI_AHCI_PORT_CMD_CR BIT15
> +#define EFI_AHCI_PORT_CMD_FRE BIT4
> +#define EFI_AHCI_PORT_CMD_FR BIT14
> +#define EFI_AHCI_PORT_CMD_MASK
> ~(EFI_AHCI_PORT_CMD_ST | EFI_AHCI_PORT_CMD_FRE |
> EFI_AHCI_PORT_CMD_COL)
> +#define EFI_AHCI_PORT_CMD_PMA BIT17
> +#define EFI_AHCI_PORT_CMD_HPCP BIT18
> +#define EFI_AHCI_PORT_CMD_MPSP BIT19
> +#define EFI_AHCI_PORT_CMD_CPD BIT20
> +#define EFI_AHCI_PORT_CMD_ESP BIT21
> +#define EFI_AHCI_PORT_CMD_ATAPI BIT24
> +#define EFI_AHCI_PORT_CMD_DLAE BIT25
> +#define EFI_AHCI_PORT_CMD_ALPE BIT26
> +#define EFI_AHCI_PORT_CMD_ASP BIT27
> +#define EFI_AHCI_PORT_CMD_ICC_MASK (BIT28 | BIT29 |
> BIT30 | BIT31)
> +#define EFI_AHCI_PORT_CMD_ACTIVE (1 << 28 )
> +#define EFI_AHCI_PORT_TFD 0x0020
> +#define EFI_AHCI_PORT_TFD_MASK (BIT7 | BIT3 | BIT0)
> +#define EFI_AHCI_PORT_TFD_BSY BIT7
> +#define EFI_AHCI_PORT_TFD_DRQ BIT3
> +#define EFI_AHCI_PORT_TFD_ERR BIT0
> +#define EFI_AHCI_PORT_TFD_ERR_MASK 0x00FF00
> +#define EFI_AHCI_PORT_SIG 0x0024
> +#define EFI_AHCI_PORT_SSTS 0x0028
> +#define EFI_AHCI_PORT_SSTS_DET_MASK 0x000F
> +#define EFI_AHCI_PORT_SSTS_DET 0x0001
> +#define EFI_AHCI_PORT_SSTS_DET_PCE 0x0003
> +#define EFI_AHCI_PORT_SSTS_SPD_MASK 0x00F0
> +#define EFI_AHCI_PORT_SCTL 0x002C
> +#define EFI_AHCI_PORT_SCTL_DET_MASK 0x000F
> +#define EFI_AHCI_PORT_SCTL_MASK
> (~EFI_AHCI_PORT_SCTL_DET_MASK)
> +#define EFI_AHCI_PORT_SCTL_DET_INIT 0x0001
> +#define EFI_AHCI_PORT_SCTL_DET_PHYCOMM 0x0003
> +#define EFI_AHCI_PORT_SCTL_SPD_MASK 0x00F0
> +#define EFI_AHCI_PORT_SCTL_IPM_MASK 0x0F00
> +#define EFI_AHCI_PORT_SCTL_IPM_INIT 0x0300
> +#define EFI_AHCI_PORT_SCTL_IPM_PSD 0x0100
> +#define EFI_AHCI_PORT_SCTL_IPM_SSD 0x0200
> +#define EFI_AHCI_PORT_SERR 0x0030
> +#define EFI_AHCI_PORT_SERR_RDIE BIT0
> +#define EFI_AHCI_PORT_SERR_RCE BIT1
> +#define EFI_AHCI_PORT_SERR_TDIE BIT8
> +#define EFI_AHCI_PORT_SERR_PCDIE BIT9
> +#define EFI_AHCI_PORT_SERR_PE BIT10
> +#define EFI_AHCI_PORT_SERR_IE BIT11
> +#define EFI_AHCI_PORT_SERR_PRC BIT16
> +#define EFI_AHCI_PORT_SERR_PIE BIT17
> +#define EFI_AHCI_PORT_SERR_CW BIT18
> +#define EFI_AHCI_PORT_SERR_BDE BIT19
> +#define EFI_AHCI_PORT_SERR_DE BIT20
> +#define EFI_AHCI_PORT_SERR_CRCE BIT21
> +#define EFI_AHCI_PORT_SERR_HE BIT22
> +#define EFI_AHCI_PORT_SERR_LSE BIT23
> +#define EFI_AHCI_PORT_SERR_TSTE BIT24
> +#define EFI_AHCI_PORT_SERR_UFT BIT25
> +#define EFI_AHCI_PORT_SERR_EX BIT26
> +#define EFI_AHCI_PORT_ERR_CLEAR 0xFFFFFFFF
> +#define EFI_AHCI_PORT_SACT 0x0034
> +#define EFI_AHCI_PORT_CI 0x0038
> +#define EFI_AHCI_PORT_SNTF 0x003C
> +
> +
> +#pragma pack(1)
> +//
> +// Command List structure includes total 32 entries.
> +// The entry Data structure is listed at the following.
> +//
> +typedef struct {
> + UINT32 AhciCmdCfl:5; //Command FIS Length
> + UINT32 AhciCmdA:1; //ATAPI
> + UINT32 AhciCmdW:1; //Write
> + UINT32 AhciCmdP:1; //Prefetchable
> + UINT32 AhciCmdR:1; //Reset
> + UINT32 AhciCmdB:1; //BIST
> + UINT32 AhciCmdC:1; //Clear Busy upon R_OK
> + UINT32 AhciCmdRsvd:1;
> + UINT32 AhciCmdPmp:4; //Port Multiplier Port
> + UINT32 AhciCmdPrdtl:16; //Physical Region Descriptor Table Length
> + UINT32 AhciCmdPrdbc; //Physical Region Descriptor Byte Count
> + UINT32 AhciCmdCtba; //Command Table Descriptor Base Address
> + UINT32 AhciCmdCtbau; //Command Table Descriptor Base Address
> Upper 32-BITs
> + UINT32 AhciCmdRsvd1[4];
> +} EFI_AHCI_COMMAND_LIST;
> +
> +//
> +// This is a software constructed FIS.
> +// For Data transfer operations, this is the H2D Register FIS format as
> +// specified in the Serial ATA Revision 2.6 specification.
> +//
> +typedef struct {
> + UINT8 AhciCFisType;
> + UINT8 AhciCFisPmNum:4;
> + UINT8 AhciCFisRsvd:1;
> + UINT8 AhciCFisRsvd1:1;
> + UINT8 AhciCFisRsvd2:1;
> + UINT8 AhciCFisCmdInd:1;
> + UINT8 AhciCFisCmd;
> + UINT8 AhciCFisFeature;
> + UINT8 AhciCFisSecNum;
> + UINT8 AhciCFisClyLow;
> + UINT8 AhciCFisClyHigh;
> + UINT8 AhciCFisDevHead;
> + UINT8 AhciCFisSecNumExp;
> + UINT8 AhciCFisClyLowExp;
> + UINT8 AhciCFisClyHighExp;
> + UINT8 AhciCFisFeatureExp;
> + UINT8 AhciCFisSecCount;
> + UINT8 AhciCFisSecCountExp;
> + UINT8 AhciCFisRsvd3;
> + UINT8 AhciCFisControl;
> + UINT8 AhciCFisRsvd4[4];
> + UINT8 AhciCFisRsvd5[44];
> +} EFI_AHCI_COMMAND_FIS;
> +
> +//
> +// ACMD: ATAPI command (12 or 16 bytes)
> +//
> +typedef struct {
> + UINT8 AtapiCmd[0x10];
> +} EFI_AHCI_ATAPI_COMMAND;
> +
> +//
> +// Physical Region Descriptor Table includes up to 65535 entries
> +// The entry Data structure is listed at the following.
> +// the actual entry number comes from the PRDTL field in the command
> +// list entry for this command slot.
> +//
> +typedef struct {
> + UINT32 AhciPrdtDba; //Data Base Address
> + UINT32 AhciPrdtDbau; //Data Base Address Upper 32-BITs
> + UINT32 AhciPrdtRsvd;
> + UINT32 AhciPrdtDbc:22; //Data Byte Count
> + UINT32 AhciPrdtRsvd1:9;
> + UINT32 AhciPrdtIoc:1; //Interrupt on Completion
> +} EFI_AHCI_COMMAND_PRDT;
> +
> +//
> +// Command table Data strucute which is pointed to by the entry in the
> command list
> +//
> +typedef struct {
> + EFI_AHCI_COMMAND_FIS CommandFis; // A software
> constructed FIS.
> + EFI_AHCI_ATAPI_COMMAND AtapiCmd; // 12 or 16 bytes
> ATAPI cmd.
> + UINT8 Reserved[0x30];
> + EFI_AHCI_COMMAND_PRDT PrdtTable; // The scatter/gather list
> for Data transfer
> +} EFI_AHCI_COMMAND_TABLE;
> +
> +//
> +// Received FIS structure
> +//
> +typedef struct {
> + UINT8 AhciDmaSetupFis[0x1C]; // Dma Setup Fis: offset 0x00
> + UINT8 AhciDmaSetupFisRsvd[0x04];
> + UINT8 AhciPioSetupFis[0x14]; // Pio Setup Fis: offset 0x20
> + UINT8 AhciPioSetupFisRsvd[0x0C];
> + UINT8 AhciD2HRegisterFis[0x14]; // D2H Register Fis: offset 0x40
> + UINT8 AhciD2HRegisterFisRsvd[0x04];
> + UINT64 AhciSetDeviceBitsFis; // Set Device Bits Fix: offset 0x58
> + UINT8 AhciUnknownFis[0x40]; // Unkonwn Fis: offset 0x60
> + UINT8 AhciUnknownFisRsvd[0x60];
> +} EFI_AHCI_RECEIVED_FIS;
> +
> +#pragma pack()
> +
> +typedef struct {
> + EFI_AHCI_RECEIVED_FIS *AhciRFis;
> + VOID *AhciRFisMapping;
> + EFI_AHCI_COMMAND_LIST *AhciCmdList;
> + VOID *AhciCmdListMapping;
> + EFI_AHCI_COMMAND_TABLE *AhciCommandTable;
> + VOID *AhciCommandTableMapping;
> +} EFI_AHCI_REGISTERS;
> +
> +typedef struct {
> + VOID *Buffer;
> + VOID *BufferMapping;
> + EFI_AHCI_REGISTERS AhciRegisters;
> + UINT32 AhciBar;
> +} AHCI_CONTEXT;
> +
> +/**
> + Send Buffer cmd to specific device.
> +
> + @param AhciContext The pointer to the AHCI_CONTEXT.
> + @param Port The number of port.
> + @param PortMultiplier The timeout Value of stop.
> + @param Buffer The Data Buffer to store IDENTIFY PACKET
> Data.
> +
> + @retval EFI_DEVICE_ERROR The cmd abort with error occurs.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_UNSUPPORTED The device is not ready for executing.
> + @retval EFI_SUCCESS The cmd executes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciIdentify (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN OUT ATA_IDENTIFY_DATA *Buffer
> + );
> +
> +/**
> + Allocate transfer-related data struct which is used at AHCI mode.
> +
> + @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
> +
> + @retval EFI_OUT_OF_RESOURCE No enough resource.
> + @retval EFI_SUCCESS Successful to allocate resource.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciAllocateResource (
> + IN OUT AHCI_CONTEXT *AhciContext
> + );
> +
> +/**
> + Free allocated transfer-related data struct which is used at AHCI mode.
> +
> + @param[in, out] AhciContext The pointer to the AHCI_CONTEXT.
> +
> +**/
> +VOID
> +EFIAPI
> +AhciFreeResource (
> + IN OUT AHCI_CONTEXT *AhciContext
> + );
> +
> +/**
> + Initialize ATA host controller at AHCI mode.
> +
> + The function is designed to initialize ATA host controller.
> +
> + @param[in] AhciContext The pointer to the AHCI_CONTEXT.
> + @param[in] Port The port number to do initialization.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciModeInitialize (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port
> + );
> +
> +typedef struct _EFI_ATA_COMMAND_BLOCK {
> + UINT8 Reserved1[2];
> + UINT8 AtaCommand;
> + UINT8 AtaFeatures;
> + UINT8 AtaSectorNumber;
> + UINT8 AtaCylinderLow;
> + UINT8 AtaCylinderHigh;
> + UINT8 AtaDeviceHead;
> + UINT8 AtaSectorNumberExp;
> + UINT8 AtaCylinderLowExp;
> + UINT8 AtaCylinderHighExp;
> + UINT8 AtaFeaturesExp;
> + UINT8 AtaSectorCount;
> + UINT8 AtaSectorCountExp;
> + UINT8 Reserved2[6];
> +} EFI_ATA_COMMAND_BLOCK;
> +
> +typedef struct _EFI_ATA_STATUS_BLOCK {
> + UINT8 Reserved1[2];
> + UINT8 AtaStatus;
> + UINT8 AtaError;
> + UINT8 AtaSectorNumber;
> + UINT8 AtaCylinderLow;
> + UINT8 AtaCylinderHigh;
> + UINT8 AtaDeviceHead;
> + UINT8 AtaSectorNumberExp;
> + UINT8 AtaCylinderLowExp;
> + UINT8 AtaCylinderHighExp;
> + UINT8 Reserved2;
> + UINT8 AtaSectorCount;
> + UINT8 AtaSectorCountExp;
> + UINT8 Reserved3[6];
> +} EFI_ATA_STATUS_BLOCK;
> +
> +/**
> + Start a PIO Data transfer on specific port.
> +
> + @param AhciContext The pointer to the AHCI_CONTEXT.
> + @param Port The number of port.
> + @param PortMultiplier The timeout Value of stop.
> + @param AtapiCommand The atapi command will be used for the
> transfer.
> + @param AtapiCommandLength The Length of the atapi command.
> + @param Read The transfer direction.
> + @param AtaCommandBlock The EFI_ATA_COMMAND_BLOCK Data.
> + @param AtaStatusBlock The EFI_ATA_STATUS_BLOCK Data.
> + @param MemoryAddr The pointer to the Data Buffer.
> + @param DataCount The Data count to be transferred.
> + @param Timeout The timeout Value of non Data transfer.
> +
> + @retval EFI_DEVICE_ERROR The PIO Data transfer abort with error
> occurs.
> + @retval EFI_TIMEOUT The operation is time out.
> + @retval EFI_UNSUPPORTED The device is not ready for transfer.
> + @retval EFI_SUCCESS The PIO Data transfer executes successfully.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +AhciPioTransfer (
> + IN AHCI_CONTEXT *AhciContext,
> + IN UINT8 Port,
> + IN UINT8 PortMultiplier,
> + IN EFI_AHCI_ATAPI_COMMAND *AtapiCommand OPTIONAL,
> + IN UINT8 AtapiCommandLength,
> + IN BOOLEAN Read,
> + IN EFI_ATA_COMMAND_BLOCK *AtaCommandBlock,
> + IN OUT EFI_ATA_STATUS_BLOCK *AtaStatusBlock,
> + IN OUT VOID *MemoryAddr,
> + IN UINT32 DataCount,
> + IN UINT64 Timeout
> + );
> +
> +
> +#endif
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
> new file mode 100644
> index 000000000000..62a71d9f440f
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.c
> @@ -0,0 +1,3003 @@
> +/** @file
> + Entrypoint of Opal UEFI Driver and contains all the logic to
> + register for new Opal device instances.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +// This UEFI driver consumes EFI_STORAGE_SECURITY_PROTOCOL instances
> and installs an
> +// HII GUI to manage Opal features if the device is Opal capable
> +// If the Opal device is being managed by the UEFI Driver, it shall provide a
> popup
> +// window during boot requesting a user password
> +
> +#include "OpalDriver.h"
> +#include "OpalHii.h"
> +
> +EFI_GUID mOpalDeviceAtaGuid = OPAL_DEVICE_ATA_GUID;
> +EFI_GUID mOpalDeviceNvmeGuid = OPAL_DEVICE_NVME_GUID;
> +
> +BOOLEAN mOpalEndOfDxe = FALSE;
> +OPAL_REQUEST_VARIABLE *mOpalRequestVariable = NULL;
> +UINTN mOpalRequestVariableSize = 0;
> +CHAR16 mPopUpString[256];
> +
> +typedef struct {
> + UINT32 Address;
> + S3_BOOT_SCRIPT_LIB_WIDTH Width;
> +} OPAL_HC_PCI_REGISTER_SAVE;
> +
> +//
> +// To unlock the Intel SATA controller at S3 Resume, restored the following
> registers.
> +//
> +const OPAL_HC_PCI_REGISTER_SAVE mSataHcRegisterSaveTemplate[] = {
> + {0x9, S3BootScriptWidthUint8},
> + {0x10, S3BootScriptWidthUint32},
> + {0x14, S3BootScriptWidthUint32},
> + {0x18, S3BootScriptWidthUint32},
> + {0x1C, S3BootScriptWidthUint32},
> + {0x20, S3BootScriptWidthUint32},
> + {0x24, S3BootScriptWidthUint32},
> + {0x3c, S3BootScriptWidthUint8},
> + {0x3d, S3BootScriptWidthUint8},
> + {0x40, S3BootScriptWidthUint16},
> + {0x42, S3BootScriptWidthUint16},
> + {0x92, S3BootScriptWidthUint16},
> + {0x94, S3BootScriptWidthUint32},
> + {0x9C, S3BootScriptWidthUint32},
> + {0x4, S3BootScriptWidthUint16},
> +};
> +
> +OPAL_DRIVER mOpalDriver;
> +
> +//
> +// Globals
> +//
> +EFI_DRIVER_BINDING_PROTOCOL gOpalDriverBinding = {
> + OpalEfiDriverBindingSupported,
> + OpalEfiDriverBindingStart,
> + OpalEfiDriverBindingStop,
> + 0x1b,
> + NULL,
> + NULL
> +};
> +
> +/**
> +
> + The function determines the available actions for the OPAL_DISK provided.
> +
> + @param[in] SupportedAttributes The supported attributes for the
> device.
> + @param[in] LockingFeature The locking status for the device.
> + @param[in] OwnerShip The ownership for the device.
> + @param[out] AvalDiskActions Pointer to fill-out with appropriate
> disk actions.
> +
> +**/
> +TCG_RESULT
> +EFIAPI
> +OpalSupportGetAvailableActions(
> + IN OPAL_DISK_SUPPORT_ATTRIBUTE *SupportedAttributes,
> + IN TCG_LOCKING_FEATURE_DESCRIPTOR *LockingFeature,
> + IN UINT16 OwnerShip,
> + OUT OPAL_DISK_ACTIONS *AvalDiskActions
> + )
> +{
> + BOOLEAN ExistingPassword;
> +
> + NULL_CHECK(AvalDiskActions);
> +
> + AvalDiskActions->AdminPass = 1;
> + AvalDiskActions->UserPass = 0;
> + AvalDiskActions->DisableUser = 0;
> + AvalDiskActions->Unlock = 0;
> +
> + //
> + // Revert is performed on locking sp, so only allow if locking sp is enabled
> + //
> + if (LockingFeature->LockingEnabled) {
> + AvalDiskActions->Revert = 1;
> + }
> +
> + //
> + // Psid revert is available for any device with media encryption support
> + // Revert is allowed for any device with media encryption support, however
> it requires
> + //
> + if (SupportedAttributes->MediaEncryption) {
> +
> + //
> + // Only allow psid revert if media encryption is enabled.
> + // Otherwise, someone who steals a disk can psid revert the disk and the
> user Data is still
> + // intact and accessible
> + //
> + AvalDiskActions->PsidRevert = 1;
> + AvalDiskActions->RevertKeepDataForced = 0;
> +
> + //
> + // Secure erase is performed by generating a new encryption key
> + // this is only available if encryption is supported
> + //
> + AvalDiskActions->SecureErase = 1;
> + } else {
> + AvalDiskActions->PsidRevert = 0;
> + AvalDiskActions->SecureErase = 0;
> +
> + //
> + // If no media encryption is supported, then a revert (using password) will
> not
> + // erase the Data (since you can't generate a new encryption key)
> + //
> + AvalDiskActions->RevertKeepDataForced = 1;
> + }
> +
> + if (LockingFeature->Locked) {
> + AvalDiskActions->Unlock = 1;
> + } else {
> + AvalDiskActions->Unlock = 0;
> + }
> +
> + //
> + // Only allow user to set password if an admin password exists
> + //
> + ExistingPassword = OpalUtilAdminPasswordExists(OwnerShip,
> LockingFeature);
> + AvalDiskActions->UserPass = ExistingPassword;
> +
> + //
> + // This will still show up even if there isn't a user, which is fine
> + //
> + AvalDiskActions->DisableUser = ExistingPassword;
> +
> + return TcgResultSuccess;
> +}
> +
> +/**
> + Enable Opal Feature for the input device.
> +
> + @param[in] Session The opal session for the opal device.
> + @param[in] Msid Msid
> + @param[in] MsidLength Msid Length
> + @param[in] Password Admin password
> + @param[in] PassLength Length of password in bytes
> +
> +**/
> +TCG_RESULT
> +EFIAPI
> +OpalSupportEnableOpalFeature (
> + IN OPAL_SESSION *Session,
> + IN VOID *Msid,
> + IN UINT32 MsidLength,
> + IN VOID *Password,
> + IN UINT32 PassLength
> + )
> +{
> + TCG_RESULT Ret;
> +
> + NULL_CHECK(Session);
> + NULL_CHECK(Msid);
> + NULL_CHECK(Password);
> +
> + Ret = OpalUtilSetAdminPasswordAsSid(
> + Session,
> + Msid,
> + MsidLength,
> + Password,
> + PassLength
> + );
> + if (Ret == TcgResultSuccess) {
> + //
> + // Enable global locking range
> + //
> + Ret = OpalUtilSetOpalLockingRange(
> + Session,
> + Password,
> + PassLength,
> +
> OPAL_LOCKING_SP_LOCKING_GLOBALRANGE,
> + 0,
> + 0,
> + TRUE,
> + TRUE,
> + FALSE,
> + FALSE
> + );
> + }
> +
> + return Ret;
> +}
> +
> +/**
> + Update password for the Opal disk.
> +
> + @param[in, out] OpalDisk The disk to update password.
> + @param[in] Password The input password.
> + @param[in] PasswordLength The input password length.
> +
> +**/
> +VOID
> +OpalSupportUpdatePassword (
> + IN OUT OPAL_DISK *OpalDisk,
> + IN VOID *Password,
> + IN UINT32 PasswordLength
> + )
> +{
> + CopyMem (OpalDisk->Password, Password, PasswordLength);
> + OpalDisk->PasswordLength = (UINT8) PasswordLength;
> +}
> +
> +/**
> + Extract device info from the device path.
> +
> + @param[in] DevicePath Device path info for the device.
> + @param[out] DevInfoLength Device information length needed.
> + @param[out] DevInfo Device information extracted.
> +
> + @return Device type.
> +
> +**/
> +UINT8
> +ExtractDeviceInfoFromDevicePath (
> + IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
> + OUT UINT16 *DevInfoLength,
> + OUT OPAL_DEVICE_COMMON *DevInfo OPTIONAL
> + )
> +{
> + EFI_DEVICE_PATH_PROTOCOL *TmpDevPath;
> + EFI_DEVICE_PATH_PROTOCOL *TmpDevPath2;
> + PCI_DEVICE_PATH *PciDevPath;
> + UINT8 DeviceType;
> + UINT8 BusNum;
> + OPAL_PCI_DEVICE *PciDevice;
> + OPAL_DEVICE_ATA *DevInfoAta;
> + OPAL_DEVICE_NVME *DevInfoNvme;
> + SATA_DEVICE_PATH *SataDevPath;
> + NVME_NAMESPACE_DEVICE_PATH *NvmeDevPath;
> +
> + ASSERT (DevicePath != NULL);
> + ASSERT (DevInfoLength != NULL);
> +
> + DeviceType = OPAL_DEVICE_TYPE_UNKNOWN;
> + *DevInfoLength = 0;
> +
> + TmpDevPath = DevicePath;
> +
> + //
> + // Get device type.
> + //
> + while (!IsDevicePathEnd (TmpDevPath)) {
> + if (TmpDevPath->Type == MESSAGING_DEVICE_PATH &&
> TmpDevPath->SubType == MSG_SATA_DP) {
> + //
> + // SATA
> + //
> + if (DevInfo != NULL) {
> + SataDevPath = (SATA_DEVICE_PATH *) TmpDevPath;
> + DevInfoAta = (OPAL_DEVICE_ATA *) DevInfo;
> + DevInfoAta->Port = SataDevPath->HBAPortNumber;
> + DevInfoAta->PortMultiplierPort =
> SataDevPath->PortMultiplierPortNumber;
> + }
> + DeviceType = OPAL_DEVICE_TYPE_ATA;
> + *DevInfoLength = sizeof (OPAL_DEVICE_ATA);
> + break;
> + } else if (TmpDevPath->Type == MESSAGING_DEVICE_PATH &&
> TmpDevPath->SubType == MSG_NVME_NAMESPACE_DP) {
> + //
> + // NVMe
> + //
> + if (DevInfo != NULL) {
> + NvmeDevPath = (NVME_NAMESPACE_DEVICE_PATH *) TmpDevPath;
> + DevInfoNvme = (OPAL_DEVICE_NVME *) DevInfo;
> + DevInfoNvme->NvmeNamespaceId = NvmeDevPath->NamespaceId;
> + }
> + DeviceType = OPAL_DEVICE_TYPE_NVME;
> + *DevInfoLength = sizeof (OPAL_DEVICE_NVME);
> + break;
> + }
> + TmpDevPath = NextDevicePathNode (TmpDevPath);
> + }
> +
> + //
> + // Get device info.
> + //
> + BusNum = 0;
> + TmpDevPath = DevicePath;
> + TmpDevPath2 = NextDevicePathNode (DevicePath);
> + while (!IsDevicePathEnd (TmpDevPath2)) {
> + if (TmpDevPath->Type == HARDWARE_DEVICE_PATH &&
> TmpDevPath->SubType == HW_PCI_DP) {
> + PciDevPath = (PCI_DEVICE_PATH *) TmpDevPath;
> + if ((TmpDevPath2->Type == MESSAGING_DEVICE_PATH &&
> TmpDevPath2->SubType == MSG_NVME_NAMESPACE_DP)||
> + (TmpDevPath2->Type == MESSAGING_DEVICE_PATH &&
> TmpDevPath2->SubType == MSG_SATA_DP)) {
> + if (DevInfo != NULL) {
> + PciDevice = &DevInfo->Device;
> + PciDevice->Segment = 0;
> + PciDevice->Bus = BusNum;
> + PciDevice->Device = PciDevPath->Device;
> + PciDevice->Function = PciDevPath->Function;
> + }
> + } else {
> + if (DevInfo != NULL) {
> + PciDevice = (OPAL_PCI_DEVICE *) ((UINTN) DevInfo +
> *DevInfoLength);
> + PciDevice->Segment = 0;
> + PciDevice->Bus = BusNum;
> + PciDevice->Device = PciDevPath->Device;
> + PciDevice->Function = PciDevPath->Function;
> + }
> + *DevInfoLength += sizeof (OPAL_PCI_DEVICE);
> + if (TmpDevPath2->Type == HARDWARE_DEVICE_PATH &&
> TmpDevPath2->SubType == HW_PCI_DP) {
> + BusNum = PciRead8 (PCI_LIB_ADDRESS (BusNum,
> PciDevPath->Device, PciDevPath->Function,
> PCI_BRIDGE_SECONDARY_BUS_REGISTER_OFFSET));
> + }
> + }
> + }
> +
> + TmpDevPath = NextDevicePathNode (TmpDevPath);
> + TmpDevPath2 = NextDevicePathNode (TmpDevPath2);
> + }
> +
> + ASSERT (DeviceType != OPAL_DEVICE_TYPE_UNKNOWN);
> + return DeviceType;
> +}
> +
> +/**
> + Save boot script for ATA OPAL device.
> +
> + @param[in] DevInfo Pointer to ATA Opal device information.
> +
> + **/
> +VOID
> +OpalDeviceAtaSaveBootScript (
> + IN OPAL_DEVICE_ATA *DevInfo
> + )
> +{
> + UINTN Bus;
> + UINTN Device;
> + UINTN Function;
> + UINTN Index;
> + EFI_STATUS Status;
> + UINTN Offset;
> + UINT64 Address;
> + S3_BOOT_SCRIPT_LIB_WIDTH Width;
> + UINT32 Data;
> + OPAL_HC_PCI_REGISTER_SAVE *HcRegisterSaveListPtr;
> + UINTN Count;
> +
> + Data = 0;
> +
> + Bus = DevInfo->Device.Bus;
> + Device = DevInfo->Device.Device;
> + Function = DevInfo->Device.Function;
> +
> + HcRegisterSaveListPtr = (OPAL_HC_PCI_REGISTER_SAVE *)
> mSataHcRegisterSaveTemplate;
> + Count = sizeof (mSataHcRegisterSaveTemplate) / sizeof
> (OPAL_HC_PCI_REGISTER_SAVE);
> +
> + for (Index = 0; Index < Count; Index++) {
> + Offset = HcRegisterSaveListPtr[Index].Address;
> + Width = HcRegisterSaveListPtr[Index].Width;
> +
> + switch (Width) {
> + case S3BootScriptWidthUint8:
> + Data = (UINT32)PciRead8
> (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
> + break;
> + case S3BootScriptWidthUint16:
> + Data = (UINT32)PciRead16
> (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
> + break;
> + case S3BootScriptWidthUint32:
> + Data = PciRead32 (PCI_LIB_ADDRESS(Bus,Device,Function,Offset));
> + break;
> + default:
> + ASSERT (FALSE);
> + break;
> + }
> +
> + Address = S3_BOOT_SCRIPT_LIB_PCI_ADDRESS (Bus, Device, Function,
> Offset);
> + Status = S3BootScriptSavePciCfgWrite (Width, Address, 1, &Data);
> + ASSERT_EFI_ERROR (Status);
> + }
> +}
> +
> +/**
> + Build ATA OPAL device info and save them to LockBox.
> +
> + @param[in] BarAddr Bar address allocated.
> +
> + **/
> +VOID
> +BuildOpalDeviceInfoAta (
> + IN UINT32 BarAddr
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 DeviceType;
> + OPAL_DEVICE_ATA *DevInfoAta;
> + OPAL_DEVICE_ATA *TempDevInfoAta;
> + UINTN DevInfoLengthAta;
> + UINT16 DevInfoLength;
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + //
> + // Build ATA OPAL device info and save them to LockBox.
> + //
> + DevInfoLengthAta = 0;
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + DeviceType = ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + NULL
> + );
> + if (DeviceType == OPAL_DEVICE_TYPE_ATA) {
> + DevInfoLengthAta += DevInfoLength;
> + }
> +
> + TmpDev = TmpDev->Next;
> + }
> +
> + if (DevInfoLengthAta == 0) {
> + return;
> + }
> +
> + DevInfoAta = AllocateZeroPool (DevInfoLengthAta);
> + ASSERT (DevInfoAta != NULL);
> +
> + TempDevInfoAta = DevInfoAta;
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + DeviceType = ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + NULL
> + );
> + if (DeviceType == OPAL_DEVICE_TYPE_ATA) {
> + ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + (OPAL_DEVICE_COMMON *) TempDevInfoAta
> + );
> + TempDevInfoAta->Length = DevInfoLength;
> + TempDevInfoAta->OpalBaseComId =
> TmpDev->OpalDisk.OpalBaseComId;
> + TempDevInfoAta->BarAddr = BarAddr;
> + CopyMem (
> + TempDevInfoAta->Password,
> + TmpDev->OpalDisk.Password,
> + TmpDev->OpalDisk.PasswordLength
> + );
> + TempDevInfoAta->PasswordLength =
> TmpDev->OpalDisk.PasswordLength;
> + OpalDeviceAtaSaveBootScript (TempDevInfoAta);
> + TempDevInfoAta = (OPAL_DEVICE_ATA *) ((UINTN) TempDevInfoAta +
> DevInfoLength);
> + }
> +
> + TmpDev = TmpDev->Next;
> + }
> +
> + Status = SaveLockBox (
> + &mOpalDeviceAtaGuid,
> + DevInfoAta,
> + DevInfoLengthAta
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + Status = SetLockBoxAttributes (
> + &mOpalDeviceAtaGuid,
> + LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + ZeroMem (DevInfoAta, DevInfoLengthAta);
> + FreePool (DevInfoAta);
> +}
> +
> +/**
> + Build NVMe OPAL device info and save them to LockBox.
> +
> + @param[in] BarAddr Bar address allocated.
> +
> + **/
> +VOID
> +BuildOpalDeviceInfoNvme (
> + IN UINT32 BarAddr
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 DeviceType;
> + OPAL_DEVICE_NVME *DevInfoNvme;
> + OPAL_DEVICE_NVME *TempDevInfoNvme;
> + UINTN DevInfoLengthNvme;
> + UINT16 DevInfoLength;
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + //
> + // Build NVMe OPAL device info and save them to LockBox.
> + //
> + DevInfoLengthNvme = 0;
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + DeviceType = ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + NULL
> + );
> + if (DeviceType == OPAL_DEVICE_TYPE_NVME) {
> + DevInfoLengthNvme += DevInfoLength;
> + }
> +
> + TmpDev = TmpDev->Next;
> + }
> +
> + if (DevInfoLengthNvme == 0) {
> + return;
> + }
> +
> + DevInfoNvme = AllocateZeroPool (DevInfoLengthNvme);
> + ASSERT (DevInfoNvme != NULL);
> +
> + TempDevInfoNvme = DevInfoNvme;
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + DeviceType = ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + NULL
> + );
> + if (DeviceType == OPAL_DEVICE_TYPE_NVME) {
> + ExtractDeviceInfoFromDevicePath (
> + TmpDev->OpalDisk.OpalDevicePath,
> + &DevInfoLength,
> + (OPAL_DEVICE_COMMON *) TempDevInfoNvme
> + );
> + TempDevInfoNvme->Length = DevInfoLength;
> + TempDevInfoNvme->OpalBaseComId =
> TmpDev->OpalDisk.OpalBaseComId;
> + TempDevInfoNvme->BarAddr = BarAddr;
> + CopyMem (
> + TempDevInfoNvme->Password,
> + TmpDev->OpalDisk.Password,
> + TmpDev->OpalDisk.PasswordLength
> + );
> + TempDevInfoNvme->PasswordLength =
> TmpDev->OpalDisk.PasswordLength;
> + TempDevInfoNvme = (OPAL_DEVICE_NVME *) ((UINTN)
> TempDevInfoNvme + DevInfoLength);
> + }
> +
> + TmpDev = TmpDev->Next;
> + }
> +
> + Status = SaveLockBox (
> + &mOpalDeviceNvmeGuid,
> + DevInfoNvme,
> + DevInfoLengthNvme
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + Status = SetLockBoxAttributes (
> + &mOpalDeviceNvmeGuid,
> + LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + ZeroMem (DevInfoNvme, DevInfoLengthNvme);
> + FreePool (DevInfoNvme);
> +}
> +
> +/**
> + Notification function of EFI_END_OF_DXE_EVENT_GROUP_GUID event
> group.
> +
> + This is a notification function registered on
> EFI_END_OF_DXE_EVENT_GROUP_GUID event group.
> +
> + @param Event Event whose notification function is being invoked.
> + @param Context Pointer to the notification function's context.
> +
> +**/
> +VOID
> +EFIAPI
> +OpalEndOfDxeEventNotify (
> + EFI_EVENT Event,
> + VOID *Context
> + )
> +{
> + EFI_STATUS Status;
> + EFI_PHYSICAL_ADDRESS Address;
> + UINT64 Length;
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + mOpalEndOfDxe = TRUE;
> +
> + if (mOpalRequestVariable != NULL) {
> + //
> + // Free the OPAL request variable buffer here
> + // as the OPAL requests should have been processed.
> + //
> + FreePool (mOpalRequestVariable);
> + mOpalRequestVariable = NULL;
> + mOpalRequestVariableSize = 0;
> + }
> +
> + //
> + // Assume 64K size and alignment are enough.
> + //
> + Length = 0x10000;
> + Address = 0xFFFFFFFF;
> + Status = gDS->AllocateMemorySpace (
> + EfiGcdAllocateMaxAddressSearchBottomUp,
> + EfiGcdMemoryTypeMemoryMappedIo,
> + 16, // 2^16: 64K
> Alignment
> + Length,
> + &Address,
> + gImageHandle,
> + NULL
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + BuildOpalDeviceInfoAta ((UINT32) Address);
> + BuildOpalDeviceInfoNvme ((UINT32) Address);
> +
> + //
> + // Zero passsword.
> + //
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev != NULL) {
> + ZeroMem (TmpDev->OpalDisk.Password,
> TmpDev->OpalDisk.PasswordLength);
> + TmpDev = TmpDev->Next;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +
> + gBS->CloseEvent (Event);
> +}
> +
> +/**
> + Get Psid input from the popup window.
> +
> + @param[in] Dev The device which need Psid to process Psid
> Revert
> + OPAL request.
> + @param[in] PopUpString Pop up string.
> + @param[out] PressEsc Whether user escape function through Press
> ESC.
> +
> + @retval Password string if success. NULL if failed.
> +
> +**/
> +CHAR8 *
> +OpalDriverPopUpPsidInput (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *PopUpString,
> + OUT BOOLEAN *PressEsc
> + )
> +{
> + EFI_INPUT_KEY InputKey;
> + UINTN InputLength;
> + CHAR16 Mask[PSID_CHARACTER_LENGTH + 1];
> + CHAR16 Unicode[PSID_CHARACTER_LENGTH + 1];
> + CHAR8 *Ascii;
> +
> + ZeroMem(Unicode, sizeof(Unicode));
> + ZeroMem(Mask, sizeof(Mask));
> +
> + *PressEsc = FALSE;
> +
> + gST->ConOut->ClearScreen(gST->ConOut);
> +
> + InputLength = 0;
> + while (TRUE) {
> + Mask[InputLength] = L'_';
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &InputKey,
> + PopUpString,
> + L"---------------------",
> + Mask,
> + NULL
> + );
> +
> + //
> + // Check key.
> + //
> + if (InputKey.ScanCode == SCAN_NULL) {
> + //
> + // password finished
> + //
> + if (InputKey.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + //
> + // Add the null terminator.
> + //
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + break;
> + } else if ((InputKey.UnicodeChar == CHAR_NULL) ||
> + (InputKey.UnicodeChar == CHAR_TAB) ||
> + (InputKey.UnicodeChar == CHAR_LINEFEED)
> + ) {
> + continue;
> + } else {
> + //
> + // delete last key entered
> + //
> + if (InputKey.UnicodeChar == CHAR_BACKSPACE) {
> + if (InputLength > 0) {
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + InputLength--;
> + }
> + } else {
> + //
> + // add Next key entry
> + //
> + Unicode[InputLength] = InputKey.UnicodeChar;
> + Mask[InputLength] = InputKey.UnicodeChar;
> + InputLength++;
> + if (InputLength == PSID_CHARACTER_LENGTH) {
> + //
> + // Add the null terminator.
> + //
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + break;
> + }
> + }
> + }
> + }
> +
> + //
> + // exit on ESC
> + //
> + if (InputKey.ScanCode == SCAN_ESC) {
> + *PressEsc = TRUE;
> + break;
> + }
> + }
> +
> + gST->ConOut->ClearScreen(gST->ConOut);
> +
> + if (InputLength == 0 || InputKey.ScanCode == SCAN_ESC) {
> + return NULL;
> + }
> +
> + Ascii = AllocateZeroPool (PSID_CHARACTER_LENGTH + 1);
> + if (Ascii == NULL) {
> + ZeroMem (Unicode, sizeof (Unicode));
> + ZeroMem (Mask, sizeof (Mask));
> + return NULL;
> + }
> +
> + UnicodeStrToAsciiStrS (Unicode, Ascii, PSID_CHARACTER_LENGTH + 1);
> + ZeroMem (Unicode, sizeof (Unicode));
> + ZeroMem (Mask, sizeof (Mask));
> +
> + return Ascii;
> +}
> +
> +
> +/**
> + Get password input from the popup window.
> +
> + @param[in] Dev The device which need password to unlock or
> + process OPAL request.
> + @param[in] PopUpString1 Pop up string 1.
> + @param[in] PopUpString2 Pop up string 2.
> + @param[out] PressEsc Whether user escape function through Press
> ESC.
> +
> + @retval Password string if success. NULL if failed.
> +
> +**/
> +CHAR8 *
> +OpalDriverPopUpPasswordInput (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *PopUpString1,
> + IN CHAR16 *PopUpString2,
> + OUT BOOLEAN *PressEsc
> + )
> +{
> + EFI_INPUT_KEY InputKey;
> + UINTN InputLength;
> + CHAR16 Mask[MAX_PASSWORD_SIZE + 1];
> + CHAR16 Unicode[MAX_PASSWORD_SIZE + 1];
> + CHAR8 *Ascii;
> +
> + ZeroMem(Unicode, sizeof(Unicode));
> + ZeroMem(Mask, sizeof(Mask));
> +
> + *PressEsc = FALSE;
> +
> + gST->ConOut->ClearScreen(gST->ConOut);
> +
> + InputLength = 0;
> + while (TRUE) {
> + Mask[InputLength] = L'_';
> + if (PopUpString2 == NULL) {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &InputKey,
> + PopUpString1,
> + L"---------------------",
> + Mask,
> + NULL
> + );
> + } else {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &InputKey,
> + PopUpString1,
> + PopUpString2,
> + L"---------------------",
> + Mask,
> + NULL
> + );
> + }
> +
> + //
> + // Check key.
> + //
> + if (InputKey.ScanCode == SCAN_NULL) {
> + //
> + // password finished
> + //
> + if (InputKey.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + //
> + // Add the null terminator.
> + //
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + break;
> + } else if ((InputKey.UnicodeChar == CHAR_NULL) ||
> + (InputKey.UnicodeChar == CHAR_TAB) ||
> + (InputKey.UnicodeChar == CHAR_LINEFEED)
> + ) {
> + continue;
> + } else {
> + //
> + // delete last key entered
> + //
> + if (InputKey.UnicodeChar == CHAR_BACKSPACE) {
> + if (InputLength > 0) {
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + InputLength--;
> + }
> + } else {
> + //
> + // add Next key entry
> + //
> + Unicode[InputLength] = InputKey.UnicodeChar;
> + Mask[InputLength] = L'*';
> + InputLength++;
> + if (InputLength == MAX_PASSWORD_SIZE) {
> + //
> + // Add the null terminator.
> + //
> + Unicode[InputLength] = 0;
> + Mask[InputLength] = 0;
> + break;
> + }
> + }
> + }
> + }
> +
> + //
> + // exit on ESC
> + //
> + if (InputKey.ScanCode == SCAN_ESC) {
> + *PressEsc = TRUE;
> + break;
> + }
> + }
> +
> + gST->ConOut->ClearScreen(gST->ConOut);
> +
> + if (InputLength == 0 || InputKey.ScanCode == SCAN_ESC) {
> + return NULL;
> + }
> +
> + Ascii = AllocateZeroPool (MAX_PASSWORD_SIZE + 1);
> + if (Ascii == NULL) {
> + ZeroMem (Unicode, sizeof (Unicode));
> + return NULL;
> + }
> +
> + UnicodeStrToAsciiStrS (Unicode, Ascii, MAX_PASSWORD_SIZE + 1);
> + ZeroMem (Unicode, sizeof (Unicode));
> +
> + return Ascii;
> +}
> +
> +/**
> + Check if disk is locked, show popup window and ask for password if it is.
> +
> + @param[in] Dev The device which need to be unlocked.
> + @param[in] RequestString Request string.
> +
> +**/
> +CHAR16 *
> +OpalGetPopUpString (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINTN StrLength;
> +
> + StrLength = StrLen (RequestString) + 1 + MAX (StrLen (Dev->Name16),
> StrLen (L"Disk"));
> + ASSERT (StrLength < sizeof (mPopUpString) / sizeof (CHAR16));
> +
> + if (Dev->Name16 == NULL) {
> + UnicodeSPrint (mPopUpString, StrLength + 1, L"%s Disk", RequestString);
> + } else {
> + UnicodeSPrint (mPopUpString, StrLength + 1, L"%s %s", RequestString,
> Dev->Name16);
> + }
> +
> + return mPopUpString;
> +}
> +
> +/**
> + Check if disk is locked, show popup window and ask for password if it is.
> +
> + @param[in] Dev The device which need to be unlocked.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +OpalDriverRequestPassword (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + BOOLEAN IsEnabled;
> + BOOLEAN IsLocked;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + IsEnabled = OpalFeatureEnabled (&Dev->OpalDisk.SupportedAttributes,
> &Dev->OpalDisk.LockingFeature);
> + if (IsEnabled) {
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + IsLocked = OpalDeviceLocked (&Dev->OpalDisk.SupportedAttributes,
> &Dev->OpalDisk.LockingFeature);
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL,
> &PressEsc);
> + if (PressEsc) {
> + if (IsLocked) {
> + //
> + // Current device in the lock status and
> + // User not input password and press ESC,
> + // keep device in lock status and continue boot.
> + //
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + //
> + // Keep lock and continue boot.
> + //
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + } else {
> + //
> + // Current device in the unlock status and
> + // User not input password and press ESC,
> + // Shutdown the device.
> + //
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to shutdown, Press ESC to input password
> again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gRT->ResetSystem (EfiResetShutdown, EFI_SUCCESS, 0, NULL);
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + if (IsLocked) {
> + Ret = OpalUtilUpdateGlobalLockingRange(&Session, Password,
> PasswordLen, FALSE, FALSE);
> + } else {
> + Ret = OpalUtilUpdateGlobalLockingRange(&Session, Password,
> PasswordLen, TRUE, TRUE);
> + if (Ret == TcgResultSuccess) {
> + Ret = OpalUtilUpdateGlobalLockingRange(&Session, Password,
> PasswordLen, FALSE, FALSE);
> + }
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid password.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit. Must shutdown!",
> + L"Press ENTER to shutdown",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> +
> + gRT->ResetSystem (EfiResetShutdown, EFI_SUCCESS, 0, NULL);
> + }
> + }
> +}
> +
> +/**
> + Process Enable Feature OPAL request.
> +
> + @param[in] Dev The device which has Enable Feature OPAL
> request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestEnableFeature (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + CHAR8 *PasswordConfirm;
> + UINT32 PasswordLenConfirm;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please
> type in your new password", &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + PasswordConfirm = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please confirm your new password", &PressEsc);
> + if (PasswordConfirm == NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + Count ++;
> + continue;
> + }
> + PasswordLenConfirm = (UINT32) AsciiStrLen(PasswordConfirm);
> + if ((PasswordLen != PasswordLenConfirm) ||
> + (CompareMem (Password, PasswordConfirm, PasswordLen) != 0)) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Passwords are not the same.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> +
> + if (PasswordConfirm != NULL) {
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + }
> +
> + Ret = OpalSupportEnableOpalFeature (&Session, Dev->OpalDisk.Msid,
> Dev->OpalDisk.MsidLength, Password, PasswordLen);
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Disable User OPAL request.
> +
> + @param[in] Dev The device which has Disable User OPAL
> request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestDisableUser (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + BOOLEAN PasswordFailed;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL,
> &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + Ret = OpalUtilDisableUser(&Session, Password, PasswordLen,
> &PasswordFailed);
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid password, request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Psid Revert OPAL request.
> +
> + @param[in] Dev The device which has Psid Revert OPAL
> request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestPsidRevert (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Psid;
> + UINT32 PsidLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PSID_TRY_COUNT) {
> + Psid = OpalDriverPopUpPsidInput (Dev, PopUpString, &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input Psid again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input Psid again.
> + //
> + continue;
> + }
> + }
> +
> + if (Psid == NULL) {
> + Count ++;
> + continue;
> + }
> + PsidLen = (UINT32) AsciiStrLen(Psid);
> +
> + Ret = OpalUtilPsidRevert(&Session, Psid, PsidLen);
> + if (Ret == TcgResultSuccess) {
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Psid != NULL) {
> + ZeroMem (Psid, PsidLen);
> + FreePool (Psid);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid Psid, request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PSID_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal Psid retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Admin Revert OPAL request.
> +
> + @param[in] Dev The device which has Revert OPAL request.
> + @param[in] KeepUserData Whether to keep user data or not.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestRevert (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN BOOLEAN KeepUserData,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + BOOLEAN PasswordFailed;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL,
> &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + if ((Dev->OpalDisk.SupportedAttributes.PyriteSsc == 1) &&
> + (Dev->OpalDisk.LockingFeature.MediaEncryption == 0)) {
> + //
> + // For pyrite type device which does not support media encryption,
> + // it does not accept "Keep User Data" parameter.
> + // So here hardcode a FALSE for this case.
> + //
> + Ret = OpalUtilRevert(
> + &Session,
> + FALSE,
> + Password,
> + PasswordLen,
> + &PasswordFailed,
> + Dev->OpalDisk.Msid,
> + Dev->OpalDisk.MsidLength
> + );
> + } else {
> + Ret = OpalUtilRevert(
> + &Session,
> + KeepUserData,
> + Password,
> + PasswordLen,
> + &PasswordFailed,
> + Dev->OpalDisk.Msid,
> + Dev->OpalDisk.MsidLength
> + );
> + }
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid password, request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Secure Erase OPAL request.
> +
> + @param[in] Dev The device which has Secure Erase OPAL
> request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestSecureErase (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + BOOLEAN PasswordFailed;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, NULL,
> &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (Password == NULL) {
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + Ret = OpalUtilSecureErase(&Session, Password, PasswordLen,
> &PasswordFailed);
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Invalid password, request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Set Admin Pwd OPAL request.
> +
> + @param[in] Dev The device which has Set Admin Pwd Feature
> OPAL request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestSetUserPwd (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *OldPassword;
> + UINT32 OldPasswordLen;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + CHAR8 *PasswordConfirm;
> + UINT32 PasswordLenConfirm;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + OldPassword = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please type in your password", &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (OldPassword == NULL) {
> + Count ++;
> + continue;
> + }
> + OldPasswordLen = (UINT32) AsciiStrLen(OldPassword);
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> + Ret = OpalUtilVerifyPassword (&Session, OldPassword, OldPasswordLen,
> OPAL_LOCKING_SP_USER1_AUTHORITY);
> + if (Ret == TcgResultSuccess) {
> + DEBUG ((DEBUG_INFO, "Verify with USER1 authority : Success\n"));
> + } else {
> + Ret = OpalUtilVerifyPassword (&Session, OldPassword, OldPasswordLen,
> OPAL_LOCKING_SP_ADMIN1_AUTHORITY);
> + if (Ret == TcgResultSuccess) {
> + DEBUG ((DEBUG_INFO, "Verify with ADMIN1 authority: Success\n"));
> + } else {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + DEBUG ((DEBUG_INFO, "Verify: Failure\n"));
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Incorrect password.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> + }
> +
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please
> type in your new password", &PressEsc);
> + if (Password == NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + PasswordConfirm = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please confirm your new password", &PressEsc);
> + if (PasswordConfirm == NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + Count ++;
> + continue;
> + }
> + PasswordLenConfirm = (UINT32) AsciiStrLen(PasswordConfirm);
> + if ((PasswordLen != PasswordLenConfirm) ||
> + (CompareMem (Password, PasswordConfirm, PasswordLen) != 0)) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Passwords are not the same.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> +
> + if (PasswordConfirm != NULL) {
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + }
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> + Ret = OpalUtilSetUserPassword(
> + &Session,
> + OldPassword,
> + OldPasswordLen,
> + Password,
> + PasswordLen
> + );
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (OldPassword != NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process Set Admin Pwd OPAL request.
> +
> + @param[in] Dev The device which has Set Admin Pwd Feature
> OPAL request.
> + @param[in] RequestString Request string.
> +
> +**/
> +VOID
> +ProcessOpalRequestSetAdminPwd (
> + IN OPAL_DRIVER_DEVICE *Dev,
> + IN CHAR16 *RequestString
> + )
> +{
> + UINT8 Count;
> + CHAR8 *OldPassword;
> + UINT32 OldPasswordLen;
> + CHAR8 *Password;
> + UINT32 PasswordLen;
> + CHAR8 *PasswordConfirm;
> + UINT32 PasswordLenConfirm;
> + OPAL_SESSION Session;
> + BOOLEAN PressEsc;
> + EFI_INPUT_KEY Key;
> + TCG_RESULT Ret;
> + CHAR16 *PopUpString;
> +
> + if (Dev == NULL) {
> + return;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a()\n", __FUNCTION__));
> +
> + PopUpString = OpalGetPopUpString (Dev, RequestString);
> +
> + Count = 0;
> +
> + while (Count < MAX_PASSWORD_TRY_COUNT) {
> + OldPassword = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please type in your password", &PressEsc);
> + if (PressEsc) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Press ENTER to skip the request and continue boot,",
> + L"Press ESC to input password again",
> + NULL
> + );
> + } while ((Key.ScanCode != SCAN_ESC) && (Key.UnicodeChar !=
> CHAR_CARRIAGE_RETURN));
> +
> + if (Key.UnicodeChar == CHAR_CARRIAGE_RETURN) {
> + gST->ConOut->ClearScreen(gST->ConOut);
> + return;
> + } else {
> + //
> + // Let user input password again.
> + //
> + continue;
> + }
> + }
> +
> + if (OldPassword == NULL) {
> + Count ++;
> + continue;
> + }
> + OldPasswordLen = (UINT32) AsciiStrLen(OldPassword);
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> + Ret = OpalUtilVerifyPassword (&Session, OldPassword, OldPasswordLen,
> OPAL_LOCKING_SP_ADMIN1_AUTHORITY);
> + if (Ret == TcgResultSuccess) {
> + DEBUG ((DEBUG_INFO, "Verify: Success\n"));
> + } else {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + DEBUG ((DEBUG_INFO, "Verify: Failure\n"));
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Incorrect password.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> +
> + Password = OpalDriverPopUpPasswordInput (Dev, PopUpString, L"Please
> type in your new password", &PressEsc);
> + if (Password == NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + Count ++;
> + continue;
> + }
> + PasswordLen = (UINT32) AsciiStrLen(Password);
> +
> + PasswordConfirm = OpalDriverPopUpPasswordInput (Dev, PopUpString,
> L"Please confirm your new password", &PressEsc);
> + if (PasswordConfirm == NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + Count ++;
> + continue;
> + }
> + PasswordLenConfirm = (UINT32) AsciiStrLen(PasswordConfirm);
> + if ((PasswordLen != PasswordLenConfirm) ||
> + (CompareMem (Password, PasswordConfirm, PasswordLen) != 0)) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Passwords are not the same.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + Count ++;
> + continue;
> + }
> +
> + if (PasswordConfirm != NULL) {
> + ZeroMem (PasswordConfirm, PasswordLenConfirm);
> + FreePool (PasswordConfirm);
> + }
> +
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->OpalDisk.Sscp;
> + Session.MediaId = Dev->OpalDisk.MediaId;
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> + Ret = OpalUtilSetAdminPassword(
> + &Session,
> + OldPassword,
> + OldPasswordLen,
> + Password,
> + PasswordLen
> + );
> + if (Ret == TcgResultSuccess) {
> + OpalSupportUpdatePassword (&Dev->OpalDisk, Password,
> PasswordLen);
> + DEBUG ((DEBUG_INFO, "%s Success\n", RequestString));
> + } else {
> + DEBUG ((DEBUG_INFO, "%s Failure\n", RequestString));
> + }
> +
> + if (OldPassword != NULL) {
> + ZeroMem (OldPassword, OldPasswordLen);
> + FreePool (OldPassword);
> + }
> +
> + if (Password != NULL) {
> + ZeroMem (Password, PasswordLen);
> + FreePool (Password);
> + }
> +
> + if (Ret == TcgResultSuccess) {
> + break;
> + }
> +
> + Count++;
> +
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Request failed.",
> + L"Press ENTER to retry",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + }
> +
> + if (Count >= MAX_PASSWORD_TRY_COUNT) {
> + do {
> + CreatePopUp (
> + EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
> + &Key,
> + L"Opal password retry count exceeds the limit.",
> + L"Press ENTER to skip the request and continue boot",
> + NULL
> + );
> + } while (Key.UnicodeChar != CHAR_CARRIAGE_RETURN);
> + gST->ConOut->ClearScreen(gST->ConOut);
> + }
> +}
> +
> +/**
> + Process OPAL request.
> +
> + @param[in] Dev The device which has OPAL request.
> +
> +**/
> +VOID
> +ProcessOpalRequest (
> + IN OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + EFI_STATUS Status;
> + OPAL_REQUEST_VARIABLE *TempVariable;
> + OPAL_REQUEST_VARIABLE *Variable;
> + UINTN VariableSize;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePathInVariable;
> + UINTN DevicePathSizeInVariable;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePath;
> + UINTN DevicePathSize;
> + BOOLEAN KeepUserData;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + if (mOpalRequestVariable == NULL) {
> + Status = GetVariable2 (
> + OPAL_REQUEST_VARIABLE_NAME,
> + &gHiiSetupVariableGuid,
> + (VOID **) &Variable,
> + &VariableSize
> + );
> + if (EFI_ERROR (Status) || (Variable == NULL)) {
> + return;
> + }
> + mOpalRequestVariable = Variable;
> + mOpalRequestVariableSize = VariableSize;
> +
> + //
> + // Delete the OPAL request variable.
> + //
> + Status = gRT->SetVariable (
> + OPAL_REQUEST_VARIABLE_NAME,
> + (EFI_GUID *) &gHiiSetupVariableGuid,
> + 0,
> + 0,
> + NULL
> + );
> + ASSERT_EFI_ERROR (Status);
> + } else {
> + Variable = mOpalRequestVariable;
> + VariableSize = mOpalRequestVariableSize;
> + }
> +
> + //
> + // Process the OPAL requests.
> + //
> + TempVariable = Variable;
> + while ((VariableSize > sizeof (OPAL_REQUEST_VARIABLE)) &&
> + (VariableSize >= TempVariable->Length) &&
> + (TempVariable->Length > sizeof (OPAL_REQUEST_VARIABLE))) {
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + DevicePathSizeInVariable = GetDevicePathSize (DevicePathInVariable);
> + DevicePath = Dev->OpalDisk.OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + if ((DevicePathSize == DevicePathSizeInVariable) &&
> + (CompareMem (DevicePath, DevicePathInVariable, DevicePathSize)
> == 0)) {
> + //
> + // Found the node for the OPAL device.
> + //
> + if (TempVariable->OpalRequest.SetAdminPwd != 0) {
> + ProcessOpalRequestSetAdminPwd (Dev, L"Update Admin Pwd:");
> + }
> + if (TempVariable->OpalRequest.SetUserPwd != 0) {
> + ProcessOpalRequestSetUserPwd (Dev, L"Set User Pwd:");
> + }
> + if (TempVariable->OpalRequest.SecureErase!= 0) {
> + ProcessOpalRequestSecureErase (Dev, L"Secure Erase:");
> + }
> + if (TempVariable->OpalRequest.Revert != 0) {
> + KeepUserData = (BOOLEAN)
> TempVariable->OpalRequest.KeepUserData;
> + ProcessOpalRequestRevert (
> + Dev,
> + KeepUserData,
> + KeepUserData ? L"Admin Revert(keep):" : L"Admin Revert:"
> + );
> + }
> + if (TempVariable->OpalRequest.PsidRevert != 0) {
> + ProcessOpalRequestPsidRevert (Dev, L"Psid Revert:");
> + }
> + if (TempVariable->OpalRequest.DisableUser != 0) {
> + ProcessOpalRequestDisableUser (Dev, L"Disable User:");
> + }
> + if (TempVariable->OpalRequest.EnableFeature != 0) {
> + ProcessOpalRequestEnableFeature (Dev, L"Enable Feature:");
> + }
> +
> + break;
> + }
> +
> + VariableSize -= TempVariable->Length;
> + TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) TempVariable +
> TempVariable->Length);
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Add new device to the global device list.
> +
> + @param Dev New create device.
> +
> +**/
> +VOID
> +AddDeviceToTail(
> + IN OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + if (mOpalDriver.DeviceList == NULL) {
> + mOpalDriver.DeviceList = Dev;
> + } else {
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev->Next != NULL) {
> + TmpDev = TmpDev->Next;
> + }
> +
> + TmpDev->Next = Dev;
> + }
> +}
> +
> +/**
> + Remove one device in the global device list.
> +
> + @param Dev The device need to be removed.
> +
> +**/
> +VOID
> +RemoveDevice (
> + IN OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + if (mOpalDriver.DeviceList == NULL) {
> + return;
> + }
> +
> + if (mOpalDriver.DeviceList == Dev) {
> + mOpalDriver.DeviceList = NULL;
> + return;
> + }
> +
> + TmpDev = mOpalDriver.DeviceList;
> + while (TmpDev->Next != NULL) {
> + if (TmpDev->Next == Dev) {
> + TmpDev->Next = Dev->Next;
> + break;
> + }
> + }
> +}
> +
> +/**
> + Get current device count.
> +
> + @retval return the current created device count.
> +
> +**/
> +UINT8
> +GetDeviceCount (
> + VOID
> + )
> +{
> + UINT8 Count;
> + OPAL_DRIVER_DEVICE *TmpDev;
> +
> + Count = 0;
> + TmpDev = mOpalDriver.DeviceList;
> +
> + while (TmpDev != NULL) {
> + Count++;
> + TmpDev = TmpDev->Next;
> + }
> +
> + return Count;
> +}
> +
> +/**
> + Get devcie list info.
> +
> + @retval return the device list pointer.
> +**/
> +OPAL_DRIVER_DEVICE*
> +OpalDriverGetDeviceList(
> + VOID
> + )
> +{
> + return mOpalDriver.DeviceList;
> +}
> +
> +/**
> + ReadyToBoot callback to send BlockSid command.
> +
> + @param Event Pointer to this event
> + @param Context Event handler private Data
> +
> +**/
> +VOID
> +EFIAPI
> +ReadyToBootCallback (
> + IN EFI_EVENT Event,
> + IN VOID *Context
> + )
> +{
> + OPAL_DRIVER_DEVICE *Itr;
> + TCG_RESULT Result;
> + OPAL_SESSION Session;
> + UINT32 PpStorageFlag;
> +
> + gBS->CloseEvent (Event);
> +
> + PpStorageFlag = Tcg2PhysicalPresenceLibGetManagementFlags ();
> + if ((PpStorageFlag &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
> + //
> + // Send BlockSID command to each Opal disk
> + //
> + Itr = mOpalDriver.DeviceList;
> + while (Itr != NULL) {
> + if (Itr->OpalDisk.SupportedAttributes.BlockSid) {
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Itr->OpalDisk.Sscp;
> + Session.MediaId = Itr->OpalDisk.MediaId;
> + Session.OpalBaseComId = Itr->OpalDisk.OpalBaseComId;
> +
> + Result = OpalBlockSid (&Session, TRUE); // HardwareReset must
> always be TRUE
> + if (Result != TcgResultSuccess) {
> + DEBUG ((DEBUG_ERROR, "OpalBlockSid fail\n"));
> + break;
> + }
> + }
> +
> + Itr = Itr->Next;
> + }
> + }
> +}
> +
> +/**
> + Stop this Controller.
> +
> + @param Dev The device need to be stopped.
> +
> +**/
> +VOID
> +OpalDriverStopDevice (
> + OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + //
> + // free each name
> + //
> + FreePool(Dev->Name16);
> +
> + //
> + // remove OPAL_DRIVER_DEVICE from the list
> + // it updates the controllerList pointer
> + //
> + RemoveDevice(Dev);
> +
> + //
> + // close protocols that were opened
> + //
> + gBS->CloseProtocol(
> + Dev->Handle,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + gOpalDriverBinding.DriverBindingHandle,
> + Dev->Handle
> + );
> +
> + gBS->CloseProtocol(
> + Dev->Handle,
> + &gEfiBlockIoProtocolGuid,
> + gOpalDriverBinding.DriverBindingHandle,
> + Dev->Handle
> + );
> +
> + FreePool(Dev);
> +}
> +
> +/**
> + Get devcie name through the component name protocol.
> +
> + @param[in] AllHandlesBuffer The handle buffer for current
> system.
> + @param[in] NumAllHandles The number of handles for the
> handle buffer.
> + @param[in] Dev The device which need to get
> name.
> + @param[in] UseComp1 Whether use component name
> or name2 protocol.
> +
> + @retval TRUE Find the name for this device.
> + @retval FALSE Not found the name for this device.
> +**/
> +BOOLEAN
> +OpalDriverGetDeviceNameByProtocol(
> + EFI_HANDLE *AllHandlesBuffer,
> + UINTN NumAllHandles,
> + OPAL_DRIVER_DEVICE *Dev,
> + BOOLEAN UseComp1
> + )
> +{
> + EFI_HANDLE* ProtocolHandlesBuffer;
> + UINTN NumProtocolHandles;
> + EFI_STATUS Status;
> + EFI_COMPONENT_NAME2_PROTOCOL* Cnp1_2; // efi component name
> and componentName2 have same layout
> + EFI_GUID Protocol;
> + UINTN StrLength;
> + EFI_DEVICE_PATH_PROTOCOL* TmpDevPath;
> + UINTN Index1;
> + UINTN Index2;
> + EFI_HANDLE TmpHandle;
> + CHAR16 *DevName;
> +
> + if (Dev == NULL || AllHandlesBuffer == NULL || NumAllHandles == 0) {
> + return FALSE;
> + }
> +
> + Protocol = UseComp1 ? gEfiComponentNameProtocolGuid :
> gEfiComponentName2ProtocolGuid;
> +
> + //
> + // Find all EFI_HANDLES with protocol
> + //
> + Status = gBS->LocateHandleBuffer(
> + ByProtocol,
> + &Protocol,
> + NULL,
> + &NumProtocolHandles,
> + &ProtocolHandlesBuffer
> + );
> + if (EFI_ERROR(Status)) {
> + return FALSE;
> + }
> +
> +
> + //
> + // Exit early if no supported devices
> + //
> + if (NumProtocolHandles == 0) {
> + return FALSE;
> + }
> +
> + //
> + // Get printable name by iterating through all protocols
> + // using the handle as the child, and iterate through all handles for the
> controller
> + // exit loop early once found, if not found, then delete device
> + // storage security protocol instances already exist, add them to internal list
> + //
> + Status = EFI_DEVICE_ERROR;
> + for (Index1 = 0; Index1 < NumProtocolHandles; Index1++) {
> + DevName = NULL;
> +
> + if (Dev->Name16 != NULL) {
> + return TRUE;
> + }
> +
> + TmpHandle = ProtocolHandlesBuffer[Index1];
> +
> + Status = gBS->OpenProtocol(
> + TmpHandle,
> + &Protocol,
> + (VOID**)&Cnp1_2,
> + gImageHandle,
> + NULL,
> + EFI_OPEN_PROTOCOL_GET_PROTOCOL
> + );
> + if (EFI_ERROR(Status) || Cnp1_2 == NULL) {
> + continue;
> + }
> +
> + //
> + // Use all handles array as controller handle
> + //
> + for (Index2 = 0; Index2 < NumAllHandles; Index2++) {
> + Status = Cnp1_2->GetControllerName(
> + Cnp1_2,
> + AllHandlesBuffer[Index2],
> + Dev->Handle,
> + LANGUAGE_ISO_639_2_ENGLISH,
> + &DevName
> + );
> + if (EFI_ERROR(Status)) {
> + Status = Cnp1_2->GetControllerName(
> + Cnp1_2,
> + AllHandlesBuffer[Index2],
> + Dev->Handle,
> + LANGUAGE_RFC_3066_ENGLISH,
> + &DevName
> + );
> + }
> + if (!EFI_ERROR(Status) && DevName != NULL) {
> + StrLength = StrLen(DevName) + 1; // Add one for NULL
> terminator
> + Dev->Name16 = AllocateZeroPool(StrLength * sizeof (CHAR16));
> + ASSERT (Dev->Name16 != NULL);
> + StrCpyS (Dev->Name16, StrLength, DevName);
> + Dev->NameZ = (CHAR8*)AllocateZeroPool(StrLength);
> + UnicodeStrToAsciiStrS (DevName, Dev->NameZ, StrLength);
> +
> + //
> + // Retrieve bridge BDF info and port number or namespace depending
> on type
> + //
> + TmpDevPath = NULL;
> + Status = gBS->OpenProtocol(
> + Dev->Handle,
> + &gEfiDevicePathProtocolGuid,
> + (VOID**)&TmpDevPath,
> + gImageHandle,
> + NULL,
> + EFI_OPEN_PROTOCOL_GET_PROTOCOL
> + );
> + if (!EFI_ERROR(Status)) {
> + Dev->OpalDevicePath = DuplicateDevicePath (TmpDevPath);
> + return TRUE;
> + }
> +
> + if (Dev->Name16 != NULL) {
> + FreePool(Dev->Name16);
> + Dev->Name16 = NULL;
> + }
> + if (Dev->NameZ != NULL) {
> + FreePool(Dev->NameZ);
> + Dev->NameZ = NULL;
> + }
> + }
> + }
> + }
> +
> + return FALSE;
> +}
> +
> +/**
> + Get devcie name through the component name protocol.
> +
> + @param[in] Dev The device which need to get
> name.
> +
> + @retval TRUE Find the name for this device.
> + @retval FALSE Not found the name for this device.
> +**/
> +BOOLEAN
> +OpalDriverGetDriverDeviceName(
> + OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + EFI_HANDLE* AllHandlesBuffer;
> + UINTN NumAllHandles;
> + EFI_STATUS Status;
> +
> + if (Dev == NULL) {
> + DEBUG((DEBUG_ERROR | DEBUG_INIT, "OpalDriverGetDriverDeviceName
> Exiting, Dev=NULL\n"));
> + return FALSE;
> + }
> +
> + //
> + // Iterate through ComponentName2 handles to get name, if fails, try
> ComponentName
> + //
> + if (Dev->Name16 == NULL) {
> + DEBUG((DEBUG_ERROR | DEBUG_INIT, "Name is null, update it\n"));
> + //
> + // Find all EFI_HANDLES
> + //
> + Status = gBS->LocateHandleBuffer(
> + AllHandles,
> + NULL,
> + NULL,
> + &NumAllHandles,
> + &AllHandlesBuffer
> + );
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_INFO, "LocateHandleBuffer for AllHandles failed %r\n",
> Status ));
> + return FALSE;
> + }
> +
> + //
> + // Try component Name2
> + //
> + if (!OpalDriverGetDeviceNameByProtocol(AllHandlesBuffer,
> NumAllHandles, Dev, FALSE)) {
> + DEBUG((DEBUG_ERROR | DEBUG_INIT, "ComponentName2 failed to get
> device name, try ComponentName\n"));
> + if (!OpalDriverGetDeviceNameByProtocol(AllHandlesBuffer,
> NumAllHandles, Dev, TRUE)) {
> + DEBUG((DEBUG_ERROR | DEBUG_INIT, "ComponentName failed to
> get device name, skip device\n"));
> + return FALSE;
> + }
> + }
> + }
> +
> + return TRUE;
> +}
> +
> +/**
> + Main entry for this driver.
> +
> + @param ImageHandle Image Handle this driver.
> + @param SystemTable Pointer to SystemTable.
> +
> + @retval EFI_SUCESS This function always complete successfully.
> +**/
> +EFI_STATUS
> +EFIAPI
> +EfiDriverEntryPoint(
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE* SystemTable
> + )
> +{
> + EFI_STATUS Status;
> + EFI_EVENT ReadyToBootEvent;
> + EFI_EVENT EndOfDxeEvent;
> +
> + Status = EfiLibInstallDriverBindingComponentName2 (
> + ImageHandle,
> + SystemTable,
> + &gOpalDriverBinding,
> + ImageHandle,
> + &gOpalComponentName,
> + &gOpalComponentName2
> + );
> +
> + if (EFI_ERROR(Status)) {
> + DEBUG((DEBUG_ERROR, "Install protocols to Opal driver Handle
> failed\n"));
> + return Status ;
> + }
> +
> + //
> + // Initialize Driver object
> + //
> + ZeroMem(&mOpalDriver, sizeof(mOpalDriver));
> + mOpalDriver.Handle = ImageHandle;
> +
> + Status = gBS->CreateEventEx (
> + EVT_NOTIFY_SIGNAL,
> + TPL_CALLBACK,
> + OpalEndOfDxeEventNotify,
> + NULL,
> + &gEfiEndOfDxeEventGroupGuid,
> + &EndOfDxeEvent
> + );
> + ASSERT_EFI_ERROR (Status);
> +
> + //
> + // register a ReadyToBoot event callback for sending BlockSid command
> + //
> + Status = EfiCreateEventReadyToBootEx (
> + TPL_CALLBACK,
> + ReadyToBootCallback,
> + (VOID *) &ImageHandle,
> + &ReadyToBootEvent
> + );
> +
> + //
> + // Install Hii packages.
> + //
> + HiiInstall();
> +
> + return Status;
> +}
> +
> +/**
> + Tests to see if this driver supports a given controller.
> +
> + This function checks to see if the controller contains an instance of the
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL and the
> EFI_BLOCK_IO_PROTOCL
> + and returns EFI_SUCCESS if it does.
> +
> + @param[in] This A pointer to the
> EFI_DRIVER_BINDING_PROTOCOL instance.
> + @param[in] ControllerHandle The Handle of the controller to test.
> This Handle
> + must support a protocol interface
> that supplies
> + an I/O abstraction to the driver.
> + @param[in] RemainingDevicePath This parameter is ignored.
> +
> + @retval EFI_SUCCESS The device contains required
> protocols
> + @retval EFI_ALREADY_STARTED The device specified by
> ControllerHandle and
> + RemainingDevicePath is already
> being managed by the driver
> + specified by This.
> + @retval EFI_ACCESS_DENIED The device specified by
> ControllerHandle and
> + RemainingDevicePath is already
> being managed by a different
> + driver or an application that requires
> exclusive access.
> + Currently not implemented.
> + @retval EFI_UNSUPPORTED The device does not contain
> requires protocols
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingSupported(
> + IN EFI_DRIVER_BINDING_PROTOCOL* This,
> + IN EFI_HANDLE Controller,
> + IN EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
> + )
> +{
> + EFI_STATUS Status;
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL* SecurityCommand;
> + EFI_BLOCK_IO_PROTOCOL* BlkIo;
> +
> + if (mOpalEndOfDxe) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + //
> + // Test EFI_STORAGE_SECURITY_COMMAND_PROTOCOL on controller
> Handle.
> + //
> + Status = gBS->OpenProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + ( VOID ** )&SecurityCommand,
> + This->DriverBindingHandle,
> + Controller,
> + EFI_OPEN_PROTOCOL_BY_DRIVER
> + );
> +
> + if (Status == EFI_ALREADY_STARTED) {
> + return EFI_SUCCESS;
> + }
> +
> + if (EFI_ERROR(Status)) {
> + return Status;
> + }
> +
> + //
> + // Close protocol and reopen in Start call
> + //
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + //
> + // Test EFI_BLOCK_IO_PROTOCOL on controller Handle, required by
> EFI_STORAGE_SECURITY_COMMAND_PROTOCOL
> + // function APIs
> + //
> + Status = gBS->OpenProtocol(
> + Controller,
> + &gEfiBlockIoProtocolGuid,
> + (VOID **)&BlkIo,
> + This->DriverBindingHandle,
> + Controller,
> + EFI_OPEN_PROTOCOL_BY_DRIVER
> + );
> +
> + if (EFI_ERROR(Status)) {
> + DEBUG((DEBUG_INFO, "No EFI_BLOCK_IO_PROTOCOL on controller\n"));
> + return Status;
> + }
> +
> + //
> + // Close protocol and reopen in Start call
> + //
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiBlockIoProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Enables Opal Management on a supported device if available.
> +
> + The start function is designed to be called after the Opal UEFI Driver has
> confirmed the
> + "controller", which is a child Handle, contains the
> EF_STORAGE_SECURITY_COMMAND protocols.
> + This function will complete the other necessary checks, such as verifying the
> device supports
> + the correct version of Opal. Upon verification, it will add the device to the
> + Opal HII list in order to expose Opal managmeent options.
> +
> + @param[in] This A pointer to the
> EFI_DRIVER_BINDING_PROTOCOL instance.
> + @param[in] ControllerHandle The Handle of the controller to start.
> This Handle
> + must support a protocol interface
> that supplies
> + an I/O abstraction to the driver.
> + @param[in] RemainingDevicePath A pointer to the remaining portion of
> a device path. This
> + parameter is ignored by device
> drivers, and is optional for bus
> + drivers. For a bus driver, if this
> parameter is NULL, then handles
> + for all the children of Controller are
> created by this driver.
> + If this parameter is not NULL and the
> first Device Path Node is
> + not the End of Device Path Node,
> then only the Handle for the
> + child device specified by the first
> Device Path Node of
> + RemainingDevicePath is created by
> this driver.
> + If the first Device Path Node of
> RemainingDevicePath is
> + the End of Device Path Node, no
> child Handle is created by this
> + driver.
> +
> + @retval EFI_SUCCESS Opal management was enabled.
> + @retval EFI_DEVICE_ERROR The device could not be started due
> to a device error.Currently not implemented.
> + @retval EFI_OUT_OF_RESOURCES The request could not be
> completed due to a lack of resources.
> + @retval Others The driver failed to start the device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingStart(
> + IN EFI_DRIVER_BINDING_PROTOCOL* This,
> + IN EFI_HANDLE Controller,
> + IN EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
> + )
> +{
> + EFI_STATUS Status;
> + EFI_BLOCK_IO_PROTOCOL *BlkIo;
> + OPAL_DRIVER_DEVICE *Dev;
> + OPAL_DRIVER_DEVICE *Itr;
> + BOOLEAN Result;
> +
> + Itr = mOpalDriver.DeviceList;
> + while (Itr != NULL) {
> + if (Controller == Itr->Handle) {
> + return EFI_SUCCESS;
> + }
> + Itr = Itr->Next;
> + }
> +
> + //
> + // Create internal device for tracking. This allows all disks to be tracked
> + // by same HII form
> + //
> + Dev =
> (OPAL_DRIVER_DEVICE*)AllocateZeroPool(sizeof(OPAL_DRIVER_DEVICE));
> + if (Dev == NULL) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + Dev->Handle = Controller;
> +
> + //
> + // Open EFI_STORAGE_SECURITY_COMMAND_PROTOCOL to perform Opal
> supported checks
> + //
> + Status = gBS->OpenProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + (VOID **)&Dev->Sscp,
> + This->DriverBindingHandle,
> + Controller,
> + EFI_OPEN_PROTOCOL_BY_DRIVER
> + );
> + if (EFI_ERROR(Status)) {
> + FreePool(Dev);
> + return Status;
> + }
> +
> + //
> + // Open EFI_BLOCK_IO_PROTOCOL on controller Handle, required by
> EFI_STORAGE_SECURITY_COMMAND_PROTOCOL
> + // function APIs
> + //
> + Status = gBS->OpenProtocol(
> + Controller,
> + &gEfiBlockIoProtocolGuid,
> + (VOID **)&BlkIo,
> + This->DriverBindingHandle,
> + Controller,
> + EFI_OPEN_PROTOCOL_BY_DRIVER
> + );
> + if (EFI_ERROR(Status)) {
> + //
> + // Close storage security that was opened
> + //
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + FreePool(Dev);
> + return Status;
> + }
> +
> + //
> + // Save mediaId
> + //
> + Dev->MediaId = BlkIo->Media->MediaId;
> +
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiBlockIoProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + //
> + // Acquire Ascii printable name of child, if not found, then ignore device
> + //
> + Result = OpalDriverGetDriverDeviceName (Dev);
> + if (!Result) {
> + goto Done;
> + }
> +
> + Status = OpalDiskInitialize (Dev);
> + if (EFI_ERROR (Status)) {
> + goto Done;
> + }
> +
> + AddDeviceToTail(Dev);
> +
> + //
> + // Check if device is locked and prompt for password.
> + //
> + OpalDriverRequestPassword (Dev, L"Unlock:");
> +
> + //
> + // Process OPAL request from last boot.
> + //
> + ProcessOpalRequest (Dev);
> +
> + return EFI_SUCCESS;
> +
> +Done:
> + //
> + // free device, close protocols and exit
> + //
> + gBS->CloseProtocol(
> + Controller,
> + &gEfiStorageSecurityCommandProtocolGuid,
> + This->DriverBindingHandle,
> + Controller
> + );
> +
> + FreePool(Dev);
> +
> + return EFI_DEVICE_ERROR;
> +}
> +
> +/**
> + Stop this driver on Controller.
> +
> + @param This Protocol instance pointer.
> + @param Controller Handle of device to stop driver on
> + @param NumberOfChildren Number of Handles in ChildHandleBuffer. If
> number of
> + children is zero stop the entire bus driver.
> + @param ChildHandleBuffer List of Child Handles to Stop.
> +
> + @retval EFI_SUCCESS This driver is removed Controller.
> + @retval other This driver could not be removed from this
> device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingStop(
> + EFI_DRIVER_BINDING_PROTOCOL* This,
> + EFI_HANDLE Controller,
> + UINTN NumberOfChildren,
> + EFI_HANDLE* ChildHandleBuffer
> + )
> +{
> + OPAL_DRIVER_DEVICE* Itr;
> +
> + Itr = mOpalDriver.DeviceList;
> +
> + //
> + // does Controller match any of the devices we are managing for Opal
> + //
> + while (Itr != NULL) {
> + if (Itr->Handle == Controller) {
> + OpalDriverStopDevice (Itr);
> + return EFI_SUCCESS;
> + }
> +
> + Itr = Itr->Next;
> + }
> +
> + return EFI_NOT_FOUND;
> +}
> +
> +
> +/**
> + Unloads UEFI Driver. Very useful for debugging and testing.
> +
> + @param ImageHandle Image Handle this driver.
> +
> + @retval EFI_SUCCESS This function always complete
> successfully.
> + @retval EFI_INVALID_PARAMETER The input ImageHandle is not valid.
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverUnload (
> + IN EFI_HANDLE ImageHandle
> + )
> +{
> + EFI_STATUS Status;
> + OPAL_DRIVER_DEVICE *Itr;
> +
> + Status = EFI_SUCCESS;
> +
> + if (ImageHandle != gImageHandle) {
> + return (EFI_INVALID_PARAMETER);
> + }
> +
> + //
> + // Uninstall any interface added to each device by us
> + //
> + while (mOpalDriver.DeviceList) {
> + Itr = mOpalDriver.DeviceList;
> + //
> + // Remove OPAL_DRIVER_DEVICE from the list
> + // it updates the controllerList pointer
> + //
> + OpalDriverStopDevice(Itr);
> + }
> +
> + //
> + // Uninstall the HII capability
> + //
> + Status = HiiUninstall();
> +
> + return Status;
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
> new file mode 100644
> index 000000000000..a66b5a5345ff
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalDriver.h
> @@ -0,0 +1,613 @@
> +/** @file
> + Values defined and used by the Opal UEFI Driver.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef _OPAL_DRIVER_H_
> +#define _OPAL_DRIVER_H_
> +
> +#include <PiDxe.h>
> +
> +#include <IndustryStandard/Pci.h>
> +
> +#include <Protocol/PciIo.h>
> +#include <Protocol/SmmCommunication.h>
> +#include <Protocol/BlockIo.h>
> +#include <Protocol/LoadedImage.h>
> +#include <Protocol/DevicePath.h>
> +#include <Protocol/DevicePathToText.h>
> +#include <Protocol/StorageSecurityCommand.h>
> +
> +#include <Guid/EventGroup.h>
> +
> +#include <Library/UefiLib.h>
> +#include <Library/UefiBootServicesTableLib.h>
> +#include <Library/UefiRuntimeServicesTableLib.h>
> +#include <Library/DxeServicesTableLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/MemoryAllocationLib.h>
> +#include <Library/BaseLib.h>
> +#include <Library/PrintLib.h>
> +#include <Library/DebugLib.h>
> +#include <Library/DevicePathLib.h>
> +#include <Library/HiiLib.h>
> +#include <Library/UefiHiiServicesLib.h>
> +#include <Library/PciLib.h>
> +#include <Library/S3BootScriptLib.h>
> +#include <Library/LockBoxLib.h>
> +#include <Library/TcgStorageOpalLib.h>
> +#include <Library/Tcg2PhysicalPresenceLib.h>
> +
> +#include "OpalPasswordCommon.h"
> +#include "OpalHiiFormValues.h"
> +
> +#define EFI_DRIVER_NAME_UNICODE L"1.0 UEFI Opal Driver"
> +
> +// UEFI 2.1
> +#define LANGUAGE_RFC_3066_ENGLISH ((CHAR8*)"en")
> +
> +// UEFI/EFI < 2.1
> +#define LANGUAGE_ISO_639_2_ENGLISH ((CHAR8*)"eng")
> +
> +#define CONCAT_(x, y) x ## y
> +#define CONCAT(x, y) CONCAT_(x, y)
> +
> +#define UNICODE_STR(x) CONCAT( L, x )
> +
> +extern EFI_DRIVER_BINDING_PROTOCOL gOpalDriverBinding;
> +extern EFI_COMPONENT_NAME_PROTOCOL gOpalComponentName;
> +extern EFI_COMPONENT_NAME2_PROTOCOL gOpalComponentName2;
> +
> +#define OPAL_MSID_LENGHT 128
> +
> +#define MAX_PASSWORD_SIZE 32
> +#define MAX_PASSWORD_TRY_COUNT 5
> +
> +// PSID Length
> +#define PSID_CHARACTER_LENGTH 0x20
> +#define MAX_PSID_TRY_COUNT 5
> +
> +#pragma pack(1)
> +
> +//
> +// Structure that is used to represent the available actions for an OpalDisk.
> +// The data can then be utilized to expose/hide certain actions available to an
> end user
> +// by the consumer of this library.
> +//
> +typedef struct {
> + //
> + // Indicates if the disk can support PSID Revert action. should verify disk
> supports PSID authority
> + //
> + UINT16 PsidRevert : 1;
> +
> + //
> + // Indicates if the disk can support Revert action
> + //
> + UINT16 Revert : 1;
> +
> + //
> + // Indicates if the user must keep data for revert action. It is true if no
> media encryption is supported.
> + //
> + UINT16 RevertKeepDataForced : 1;
> +
> + //
> + // Indicates if the disk can support set Admin password
> + //
> + UINT16 AdminPass : 1;
> +
> + //
> + // Indicates if the disk can support set User password. This action
> requires that a user
> + // password is first enabled.
> + //
> + UINT16 UserPass : 1;
> +
> + //
> + // Indicates if unlock action is available. Requires disk to be currently
> locked.
> + //
> + UINT16 Unlock : 1;
> +
> + //
> + // Indicates if Secure Erase action is available. Action requires admin
> credentials and media encryption support.
> + //
> + UINT16 SecureErase : 1;
> +
> + //
> + // Indicates if Disable User action is available. Action requires admin
> credentials.
> + //
> + UINT16 DisableUser : 1;
> +} OPAL_DISK_ACTIONS;
> +
> +//
> +// Structure that is used to represent an OPAL_DISK.
> +//
> +typedef struct {
> + UINT32 MsidLength;
> // Byte length of MSID Pin for device
> + UINT8
> Msid[OPAL_MSID_LENGHT]; // MSID Pin for device
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *Sscp;
> + UINT32 MediaId;
> // MediaId is used by Ssc Protocol.
> + EFI_DEVICE_PATH_PROTOCOL *OpalDevicePath;
> + UINT16 OpalBaseComId;
> // Opal SSC 1 base com id.
> + OPAL_OWNER_SHIP Owner;
> + OPAL_DISK_SUPPORT_ATTRIBUTE
> SupportedAttributes;
> + TCG_LOCKING_FEATURE_DESCRIPTOR LockingFeature;
> // Locking Feature Descriptor retrieved from performing a Level 0 Discovery
> + UINT8 PasswordLength;
> + UINT8
> Password[MAX_PASSWORD_SIZE];
> +} OPAL_DISK;
> +
> +//
> +// Device with block IO protocol
> +//
> +typedef struct _OPAL_DRIVER_DEVICE OPAL_DRIVER_DEVICE;
> +
> +struct _OPAL_DRIVER_DEVICE {
> + OPAL_DRIVER_DEVICE *Next;
> ///< Linked list pointer
> + EFI_HANDLE Handle;
> ///< Device handle
> + OPAL_DISK OpalDisk;
> ///< User context
> + CHAR16 *Name16;
> ///< Allocated/freed by UEFI Filter Driver at device creation/removal
> + CHAR8 *NameZ;
> ///< Allocated/freed by UEFI Filter Driver at device creation/removal
> + UINT32 MediaId;
> ///< Required parameter for EFI_STORAGE_SECURITY_COMMAND_PROTOCOL,
> from BLOCK_IO_MEDIA
> +
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *Sscp;
> /// Device protocols consumed
> + EFI_DEVICE_PATH_PROTOCOL *OpalDevicePath;
> +};
> +
> +//
> +// Opal Driver UEFI Driver Model
> +//
> +typedef struct {
> + EFI_HANDLE Handle; ///< Driver image handle
> + OPAL_DRIVER_DEVICE *DeviceList; ///< Linked list of controllers
> owned by this Driver
> +} OPAL_DRIVER;
> +
> +#pragma pack()
> +
> +//
> +// Retrieves a OPAL_DRIVER_DEVICE based on the pointer to its StorageSecurity
> protocol.
> +//
> +#define DRIVER_DEVICE_FROM_OPALDISK(OpalDiskPointer)
> (OPAL_DRIVER_DEVICE*)(BASE_CR(OpalDiskPointer, OPAL_DRIVER_DEVICE,
> OpalDisk))
> +
> +/**
> + Get devcie list info.
> +
> + @retval return the device list pointer.
> +**/
> +OPAL_DRIVER_DEVICE*
> +OpalDriverGetDeviceList(
> + VOID
> + );
> +
> +/**
> + Get devcie name through the component name protocol.
> +
> + @param[in] Dev The device which need to get
> name.
> +
> + @retval TRUE Find the name for this device.
> + @retval FALSE Not found the name for this device.
> +**/
> +BOOLEAN
> +OpalDriverGetDriverDeviceName(
> + OPAL_DRIVER_DEVICE *Dev
> + );
> +
> +/**
> + Get current device count.
> +
> + @retval return the current created device count.
> +
> +**/
> +UINT8
> +GetDeviceCount (
> + VOID
> + );
> +
> +/**
> + Update password for the Opal disk.
> +
> + @param[in, out] OpalDisk The disk to update password.
> + @param[in] Password The input password.
> + @param[in] PasswordLength The input password length.
> +
> +**/
> +VOID
> +OpalSupportUpdatePassword (
> + IN OUT OPAL_DISK *OpalDisk,
> + IN VOID *Password,
> + IN UINT32 PasswordLength
> + );
> +
> +/**
> +
> + The function performs determines the available actions for the OPAL_DISK
> provided.
> +
> + @param[in] SupportedAttributes The support attribute for the device.
> + @param[in] LockingFeature The locking status for the device.
> + @param[in] OwnerShip The ownership for the device.
> + @param[out] AvalDiskActions Pointer to fill-out with appropriate
> disk actions.
> +
> +**/
> +TCG_RESULT
> +EFIAPI
> +OpalSupportGetAvailableActions(
> + IN OPAL_DISK_SUPPORT_ATTRIBUTE *SupportedAttributes,
> + IN TCG_LOCKING_FEATURE_DESCRIPTOR *LockingFeature,
> + IN UINT16 OwnerShip,
> + OUT OPAL_DISK_ACTIONS *AvalDiskActions
> + );
> +
> +/**
> + Enable Opal Feature for the input device.
> +
> + @param[in] Session The opal session for the opal device.
> + @param[in] Msid Msid
> + @param[in] MsidLength Msid Length
> + @param[in] Password Admin password
> + @param[in] PassLength Length of password in bytes
> +
> +**/
> +TCG_RESULT
> +EFIAPI
> +OpalSupportEnableOpalFeature (
> + IN OPAL_SESSION *Session,
> + IN VOID *Msid,
> + IN UINT32 MsidLength,
> + IN VOID *Password,
> + IN UINT32 PassLength
> + );
> +
> +/**
> + Unloads UEFI Driver. Very useful for debugging and testing.
> +
> + @param ImageHandle Image handle this driver.
> +
> + @retval EFI_SUCCESS This function always complete
> successfully.
> + @retval EFI_INVALID_PARAMETER The input ImageHandle is not valid.
> +**/
> +EFI_STATUS
> +EFIAPI
> +EfiDriverUnload(
> + EFI_HANDLE ImageHandle
> + );
> +
> +
> +/**
> + Test to see if this driver supports Controller.
> +
> + @param This Protocol instance pointer.
> + @param ControllerHandle Handle of device to test
> + @param RemainingDevicePath Optional parameter use to pick a specific
> child
> + device to start.
> +
> + @retval EFI_SUCCESS This driver supports this device.
> + @retval EFI_ALREADY_STARTED This driver is already running on this device.
> + @retval other This driver does not support this device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingSupported(
> + EFI_DRIVER_BINDING_PROTOCOL* This,
> + EFI_HANDLE Controller,
> + EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
> + );
> +
> +/**
> + Enables Opal Management on a supported device if available.
> +
> + The start function is designed to be called after the Opal UEFI Driver has
> confirmed the
> + "controller", which is a child handle, contains the
> EF_STORAGE_SECURITY_COMMAND protocols.
> + This function will complete the other necessary checks, such as verifying the
> device supports
> + the correct version of Opal. Upon verification, it will add the device to the
> + Opal HII list in order to expose Opal managmeent options.
> +
> + @param[in] This A pointer to the
> EFI_DRIVER_BINDING_PROTOCOL instance.
> + @param[in] ControllerHandle The handle of the controller to start.
> This handle
> + must support a protocol interface
> that supplies
> + an I/O abstraction to the driver.
> + @param[in] RemainingDevicePath A pointer to the remaining portion of
> a device path. This
> + parameter is ignored by device
> drivers, and is optional for bus
> + drivers. For a bus driver, if this
> parameter is NULL, then handles
> + for all the children of Controller are
> created by this driver.
> + If this parameter is not NULL and the
> first Device Path Node is
> + not the End of Device Path Node,
> then only the handle for the
> + child device specified by the first
> Device Path Node of
> + RemainingDevicePath is created by
> this driver.
> + If the first Device Path Node of
> RemainingDevicePath is
> + the End of Device Path Node, no
> child handle is created by this
> + driver.
> +
> + @retval EFI_SUCCESS Opal management was enabled.
> + @retval EFI_DEVICE_ERROR The device could not be started due
> to a device error.Currently not implemented.
> + @retval EFI_OUT_OF_RESOURCES The request could not be
> completed due to a lack of resources.
> + @retval Others The driver failed to start the device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingStart(
> + EFI_DRIVER_BINDING_PROTOCOL* This,
> + EFI_HANDLE Controller,
> + EFI_DEVICE_PATH_PROTOCOL* RemainingDevicePath
> + );
> +
> +/**
> + Stop this driver on Controller.
> +
> + @param This Protocol instance pointer.
> + @param Controller Handle of device to stop driver on
> + @param NumberOfChildren Number of Handles in ChildHandleBuffer. If
> number of
> + children is zero stop the entire bus driver.
> + @param ChildHandleBuffer List of Child Handles to Stop.
> +
> + @retval EFI_SUCCESS This driver is removed Controller.
> + @retval other This driver could not be removed from this
> device.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverBindingStop(
> + EFI_DRIVER_BINDING_PROTOCOL* This,
> + EFI_HANDLE Controller,
> + UINTN NumberOfChildren,
> + EFI_HANDLE* ChildHandleBuffer
> + );
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the driver.
> +
> + This function retrieves the user readable name of a driver in the form of a
> + Unicode string. If the driver specified by This has a user readable name in
> + the language specified by Language, then a pointer to the driver name is
> + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
> + by This does not support the language specified by Language,
> + then EFI_UNSUPPORTED is returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> + in RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param DriverName[out] A pointer to the Unicode string to
> return.
> + This Unicode string is the name of the
> + driver specified by This in the language
> + specified by Language.
> +
> + @retval EFI_SUCCESS The Unicode string for the Driver specified
> by
> + This and the language specified by
> Language was
> + returned in DriverName.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER DriverName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentNameGetDriverName(
> + EFI_COMPONENT_NAME_PROTOCOL* This,
> + CHAR8* Language,
> + CHAR16** DriverName
> + );
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentNameGetControllerName(
> + EFI_COMPONENT_NAME_PROTOCOL* This,
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + );
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the driver.
> +
> + This function retrieves the user readable name of a driver in the form of a
> + Unicode string. If the driver specified by This has a user readable name in
> + the language specified by Language, then a pointer to the driver name is
> + returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
> + by This does not support the language specified by Language,
> + then EFI_UNSUPPORTED is returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> + in RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param DriverName[out] A pointer to the Unicode string to
> return.
> + This Unicode string is the name of the
> + driver specified by This in the language
> + specified by Language.
> +
> + @retval EFI_SUCCESS The Unicode string for the Driver specified
> by
> + This and the language specified by
> Language was
> + returned in DriverName.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER DriverName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentName2GetDriverName(
> + EFI_COMPONENT_NAME2_PROTOCOL* This,
> + CHAR8* Language,
> + CHAR16** DriverName
> + );
> +
> +/**
> + Retrieves a Unicode string that is the user readable name of the controller
> + that is being managed by a driver.
> +
> + This function retrieves the user readable name of the controller specified by
> + ControllerHandle and ChildHandle in the form of a Unicode string. If the
> + driver specified by This has a user readable name in the language specified by
> + Language, then a pointer to the controller name is returned in
> ControllerName,
> + and EFI_SUCCESS is returned. If the driver specified by This is not currently
> + managing the controller specified by ControllerHandle and ChildHandle,
> + then EFI_UNSUPPORTED is returned. If the driver specified by This does not
> + support the language specified by Language, then EFI_UNSUPPORTED is
> returned.
> +
> + @param This[in] A pointer to the
> EFI_COMPONENT_NAME2_PROTOCOL or
> + EFI_COMPONENT_NAME_PROTOCOL
> instance.
> +
> + @param ControllerHandle[in] The handle of a controller that the driver
> + specified by This is managing. This
> handle
> + specifies the controller whose name is to
> be
> + returned.
> +
> + @param ChildHandle[in] The handle of the child controller to
> retrieve
> + the name of. This is an optional
> parameter that
> + may be NULL. It will be NULL for device
> + drivers. It will also be NULL for a bus
> drivers
> + that wish to retrieve the name of the bus
> + controller. It will not be NULL for a bus
> + driver that wishes to retrieve the name of
> a
> + child controller.
> +
> + @param Language[in] A pointer to a Null-terminated ASCII
> string
> + array indicating the language. This is the
> + language of the driver name that the
> caller is
> + requesting, and it must match one of the
> + languages specified in
> SupportedLanguages. The
> + number of languages supported by a
> driver is up
> + to the driver writer. Language is specified
> in
> + RFC 4646 or ISO 639-2 language code
> format.
> +
> + @param ControllerName[out] A pointer to the Unicode string to return.
> + This Unicode string is the name of the
> + controller specified by ControllerHandle
> and
> + ChildHandle in the language specified by
> + Language from the point of view of the
> driver
> + specified by This.
> +
> + @retval EFI_SUCCESS The Unicode string for the user readable
> name in
> + the language specified by Language for
> the
> + driver specified by This was returned in
> + DriverName.
> +
> + @retval EFI_INVALID_PARAMETER ControllerHandle is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a
> valid
> + EFI_HANDLE.
> +
> + @retval EFI_INVALID_PARAMETER Language is NULL.
> +
> + @retval EFI_INVALID_PARAMETER ControllerName is NULL.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This is not
> currently
> + managing the controller specified by
> + ControllerHandle and ChildHandle.
> +
> + @retval EFI_UNSUPPORTED The driver specified by This does not
> support
> + the language specified by Language.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalEfiDriverComponentName2GetControllerName(
> + EFI_COMPONENT_NAME2_PROTOCOL* This,
> + EFI_HANDLE ControllerHandle,
> + EFI_HANDLE ChildHandle,
> + CHAR8* Language,
> + CHAR16** ControllerName
> + );
> +
> +#endif //_OPAL_DRIVER_H_
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
> new file mode 100644
> index 000000000000..e4972227b669
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.c
> @@ -0,0 +1,1178 @@
> +/** @file
> + Implementation of the HII for the Opal UEFI Driver.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalHii.h"
> +
> +//
> +// This is the generated IFR binary Data for each formset defined in VFR.
> +// This Data array is ready to be used as input of HiiAddPackages() to
> +// create a packagelist (which contains Form packages, String packages, etc).
> +//
> +extern UINT8 OpalPasswordFormBin[];
> +
> +//
> +// This is the generated String package Data for all .UNI files.
> +// This Data array is ready to be used as input of HiiAddPackages() to
> +// create a packagelist (which contains Form packages, String packages, etc).
> +//
> +extern UINT8 OpalPasswordDxeStrings[];
> +
> +CHAR16 OpalPasswordStorageName[] = L"OpalHiiConfig";
> +
> +EFI_HII_CONFIG_ACCESS_PROTOCOL gHiiConfigAccessProtocol;
> +
> +//
> +// Handle to the list of HII packages (forms and strings) for this driver
> +//
> +EFI_HII_HANDLE gHiiPackageListHandle = NULL;
> +
> +//
> +// Package List GUID containing all form and string packages
> +//
> +const EFI_GUID gHiiPackageListGuid = PACKAGE_LIST_GUID;
> +const EFI_GUID gHiiSetupVariableGuid = SETUP_VARIABLE_GUID;
> +
> +//
> +// Structure that contains state of the HII
> +// This structure is updated by Hii.cpp and its contents
> +// is rendered in the HII.
> +//
> +OPAL_HII_CONFIGURATION gHiiConfiguration;
> +
> +//
> +// The device path containing the VENDOR_DEVICE_PATH and
> EFI_DEVICE_PATH_PROTOCOL
> +//
> +HII_VENDOR_DEVICE_PATH gHiiVendorDevicePath = {
> + {
> + {
> + HARDWARE_DEVICE_PATH,
> + HW_VENDOR_DP,
> + {
> + (UINT8)(sizeof(VENDOR_DEVICE_PATH)),
> + (UINT8)((sizeof(VENDOR_DEVICE_PATH)) >> 8)
> + }
> + },
> + OPAL_PASSWORD_CONFIG_GUID
> + },
> + {
> + END_DEVICE_PATH_TYPE,
> + END_ENTIRE_DEVICE_PATH_SUBTYPE,
> + {
> + (UINT8)(END_DEVICE_PATH_LENGTH),
> + (UINT8)((END_DEVICE_PATH_LENGTH) >> 8)
> + }
> + }
> +};
> +
> +/**
> + Get saved OPAL request.
> +
> + @param[in] OpalDisk The disk needs to get the saved OPAL request.
> + @param[out] OpalRequest OPAL request got.
> +
> +**/
> +VOID
> +GetSavedOpalRequest (
> + IN OPAL_DISK *OpalDisk,
> + OUT OPAL_REQUEST *OpalRequest
> + )
> +{
> + EFI_STATUS Status;
> + OPAL_REQUEST_VARIABLE *TempVariable;
> + OPAL_REQUEST_VARIABLE *Variable;
> + UINTN VariableSize;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePathInVariable;
> + UINTN DevicePathSizeInVariable;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePath;
> + UINTN DevicePathSize;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + Variable = NULL;
> + VariableSize = 0;
> +
> + Status = GetVariable2 (
> + OPAL_REQUEST_VARIABLE_NAME,
> + &gHiiSetupVariableGuid,
> + (VOID **) &Variable,
> + &VariableSize
> + );
> + if (EFI_ERROR (Status) || (Variable == NULL)) {
> + return;
> + }
> +
> + TempVariable = Variable;
> + while ((VariableSize > sizeof (OPAL_REQUEST_VARIABLE)) &&
> + (VariableSize >= TempVariable->Length) &&
> + (TempVariable->Length > sizeof (OPAL_REQUEST_VARIABLE))) {
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + DevicePathSizeInVariable = GetDevicePathSize (DevicePathInVariable);
> + DevicePath = OpalDisk->OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + if ((DevicePathSize == DevicePathSizeInVariable) &&
> + (CompareMem (DevicePath, DevicePathInVariable, DevicePathSize)
> == 0)) {
> + //
> + // Found the node for the OPAL device.
> + // Get the OPAL request.
> + //
> + CopyMem (OpalRequest, &TempVariable->OpalRequest, sizeof
> (OPAL_REQUEST));
> + DEBUG ((
> + DEBUG_INFO,
> + "OpalRequest got: 0x%x\n",
> + *OpalRequest
> + ));
> + break;
> + }
> + VariableSize -= TempVariable->Length;
> + TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) TempVariable +
> TempVariable->Length);
> + }
> +
> + FreePool (Variable);
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Save OPAL request.
> +
> + @param[in] OpalDisk The disk has OPAL request to save.
> + @param[in] OpalRequest OPAL request to save.
> +
> +**/
> +VOID
> +SaveOpalRequest (
> + IN OPAL_DISK *OpalDisk,
> + IN OPAL_REQUEST OpalRequest
> + )
> +{
> + EFI_STATUS Status;
> + OPAL_REQUEST_VARIABLE *TempVariable;
> + UINTN TempVariableSize;
> + OPAL_REQUEST_VARIABLE *Variable;
> + UINTN VariableSize;
> + OPAL_REQUEST_VARIABLE *NewVariable;
> + UINTN NewVariableSize;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePathInVariable;
> + UINTN DevicePathSizeInVariable;
> + EFI_DEVICE_PATH_PROTOCOL *DevicePath;
> + UINTN DevicePathSize;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "OpalRequest to save: 0x%x\n",
> + OpalRequest
> + ));
> +
> + Variable = NULL;
> + VariableSize = 0;
> + NewVariable = NULL;
> + NewVariableSize = 0;
> +
> + Status = GetVariable2 (
> + OPAL_REQUEST_VARIABLE_NAME,
> + &gHiiSetupVariableGuid,
> + (VOID **) &Variable,
> + &VariableSize
> + );
> + if (!EFI_ERROR (Status) && (Variable != NULL)) {
> + TempVariable = Variable;
> + TempVariableSize = VariableSize;
> + while ((TempVariableSize > sizeof (OPAL_REQUEST_VARIABLE)) &&
> + (TempVariableSize >= TempVariable->Length) &&
> + (TempVariable->Length > sizeof (OPAL_REQUEST_VARIABLE))) {
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + DevicePathSizeInVariable = GetDevicePathSize (DevicePathInVariable);
> + DevicePath = OpalDisk->OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + if ((DevicePathSize == DevicePathSizeInVariable) &&
> + (CompareMem (DevicePath, DevicePathInVariable, DevicePathSize)
> == 0)) {
> + //
> + // Found the node for the OPAL device.
> + // Update the OPAL request.
> + //
> + CopyMem (&TempVariable->OpalRequest, &OpalRequest, sizeof
> (OPAL_REQUEST));
> + NewVariable = Variable;
> + NewVariableSize = VariableSize;
> + break;
> + }
> + TempVariableSize -= TempVariable->Length;
> + TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) TempVariable +
> TempVariable->Length);
> + }
> + if (NewVariable == NULL) {
> + //
> + // The node for the OPAL device is not found.
> + // Create node for the OPAL device.
> + //
> + DevicePath = OpalDisk->OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + NewVariableSize = VariableSize + sizeof (OPAL_REQUEST_VARIABLE) +
> DevicePathSize;
> + NewVariable = AllocatePool (NewVariableSize);
> + ASSERT (NewVariable != NULL);
> + CopyMem (NewVariable, Variable, VariableSize);
> + TempVariable = (OPAL_REQUEST_VARIABLE *) ((UINTN) NewVariable +
> VariableSize);
> + TempVariable->Length = (UINT32) (sizeof (OPAL_REQUEST_VARIABLE) +
> DevicePathSize);
> + CopyMem (&TempVariable->OpalRequest, &OpalRequest, sizeof
> (OPAL_REQUEST));
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> TempVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + CopyMem (DevicePathInVariable, DevicePath, DevicePathSize);
> + }
> + } else {
> + DevicePath = OpalDisk->OpalDevicePath;
> + DevicePathSize = GetDevicePathSize (DevicePath);
> + NewVariableSize = sizeof (OPAL_REQUEST_VARIABLE) + DevicePathSize;
> + NewVariable = AllocatePool (NewVariableSize);
> + ASSERT (NewVariable != NULL);
> + NewVariable->Length = (UINT32) (sizeof (OPAL_REQUEST_VARIABLE) +
> DevicePathSize);
> + CopyMem (&NewVariable->OpalRequest, &OpalRequest, sizeof
> (OPAL_REQUEST));
> + DevicePathInVariable = (EFI_DEVICE_PATH_PROTOCOL *) ((UINTN)
> NewVariable + sizeof (OPAL_REQUEST_VARIABLE));
> + CopyMem (DevicePathInVariable, DevicePath, DevicePathSize);
> + }
> + Status = gRT->SetVariable (
> + OPAL_REQUEST_VARIABLE_NAME,
> + (EFI_GUID *) &gHiiSetupVariableGuid,
> + EFI_VARIABLE_NON_VOLATILE |
> EFI_VARIABLE_BOOTSERVICE_ACCESS,
> + NewVariableSize,
> + NewVariable
> + );
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_INFO, "OpalRequest variable set failed (%r)\n", Status));
> + }
> + if (NewVariable != Variable) {
> + FreePool (NewVariable);
> + }
> + if (Variable != NULL) {
> + FreePool (Variable);
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Sets the current system state of global config variables.
> +
> +**/
> +VOID
> +HiiSetCurrentConfiguration(
> + VOID
> + )
> +{
> + UINT32 PpStorageFlag;
> + EFI_STRING NewString;
> +
> + gHiiConfiguration.NumDisks = GetDeviceCount();
> +
> + //
> + // Update the BlockSID status string.
> + //
> + PpStorageFlag = Tcg2PhysicalPresenceLibGetManagementFlags ();
> +
> + if ((PpStorageFlag &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_ENABLED), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + } else {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISABLED), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + }
> + HiiSetString(gHiiPackageListHandle,
> STRING_TOKEN(STR_BLOCKSID_STATUS1), NewString, NULL);
> + FreePool (NewString);
> +
> + if ((PpStorageFlag &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_PP_REQUIRED_FOR_ENABLE_BL
> OCK_SID) != 0) {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_TRUE), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + } else {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_FALSE), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + }
> + HiiSetString(gHiiPackageListHandle,
> STRING_TOKEN(STR_BLOCKSID_STATUS2), NewString, NULL);
> + FreePool (NewString);
> +
> + if ((PpStorageFlag &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_PP_REQUIRED_FOR_DISABLE_BL
> OCK_SID) != 0) {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_TRUE), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + } else {
> + NewString = HiiGetString (gHiiPackageListHandle,
> STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_FALSE), NULL);
> + if (NewString == NULL) {
> + DEBUG ((DEBUG_INFO, "HiiSetCurrentConfiguration: HiiGetString( )
> failed\n"));
> + return;
> + }
> + }
> + HiiSetString(gHiiPackageListHandle,
> STRING_TOKEN(STR_BLOCKSID_STATUS3), NewString, NULL);
> + FreePool (NewString);
> +}
> +
> +/**
> + Install the HII related resources.
> +
> + @retval EFI_SUCCESS Install all the resources success.
> + @retval other Error occur when install the resources.
> +**/
> +EFI_STATUS
> +HiiInstall(
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> + EFI_HANDLE DriverHandle;
> +
> + //
> + // Clear the global configuration.
> + //
> + ZeroMem(&gHiiConfiguration, sizeof(gHiiConfiguration));
> +
> + //
> + // Obtain the driver handle that the BIOS assigned us
> + //
> + DriverHandle = HiiGetDriverImageHandleCB();
> +
> + //
> + // Populate the config access protocol with the three functions we are
> publishing
> + //
> + gHiiConfigAccessProtocol.ExtractConfig = ExtractConfig;
> + gHiiConfigAccessProtocol.RouteConfig = RouteConfig;
> + gHiiConfigAccessProtocol.Callback = DriverCallback;
> +
> + //
> + // Associate the required protocols with our driver handle
> + //
> + Status = gBS->InstallMultipleProtocolInterfaces(
> + &DriverHandle,
> + &gEfiHiiConfigAccessProtocolGuid,
> + &gHiiConfigAccessProtocol, // HII callback
> + &gEfiDevicePathProtocolGuid,
> + &gHiiVendorDevicePath, // required for HII callback
> allow all disks to be shown in same hii
> + NULL
> + );
> +
> + if (EFI_ERROR(Status)) {
> + return Status;
> + }
> +
> + return OpalHiiAddPackages();
> +}
> +
> +/**
> + Install the HII form and string packages.
> +
> + @retval EFI_SUCCESS Install all the resources success.
> + @retval EFI_OUT_OF_RESOURCES Out of resource error.
> +**/
> +EFI_STATUS
> +OpalHiiAddPackages(
> + VOID
> + )
> +{
> + EFI_HANDLE DriverHandle;
> + CHAR16 *NewString;
> +
> + DriverHandle = HiiGetDriverImageHandleCB();
> +
> + //
> + // Publish the HII form and HII string packages
> + //
> + gHiiPackageListHandle = HiiAddPackages(
> + &gHiiPackageListGuid,
> + DriverHandle,
> + OpalPasswordDxeStrings,
> + OpalPasswordFormBin,
> + (VOID*)NULL
> + );
> +
> + //
> + // Make sure the packages installed successfully
> + //
> + if (gHiiPackageListHandle == NULL) {
> + DEBUG ((DEBUG_INFO, "OpalHiiAddPackages failed\n"));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + //
> + // Update Version String in main window
> + //
> + NewString = HiiGetDriverNameCB ();
> + if (HiiSetString(gHiiPackageListHandle,
> STRING_TOKEN(STR_MAIN_OPAL_VERSION), NewString, NULL) == 0) {
> + DEBUG ((DEBUG_INFO, "OpalHiiAddPackages: HiiSetString( ) failed\n"));
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Uninstall the HII capability.
> +
> + @retval EFI_SUCCESS Uninstall all the resources success.
> + @retval others Other errors occur when unistall the hii
> resource.
> +**/
> +EFI_STATUS
> +HiiUninstall(
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> +
> + //
> + // Remove the packages we've provided to the BIOS
> + //
> + HiiRemovePackages(gHiiPackageListHandle);
> +
> + //
> + // Remove the protocols from our driver handle
> + //
> + Status = gBS->UninstallMultipleProtocolInterfaces(
> + HiiGetDriverImageHandleCB(),
> + &gEfiHiiConfigAccessProtocolGuid,
> + &gHiiConfigAccessProtocol, // HII
> callback
> + &gEfiDevicePathProtocolGuid,
> + &gHiiVendorDevicePath, //
> required for HII callback
> + NULL
> + );
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_INFO, "Cannot uninstall Hii Protocols: %r\n", Status));
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Updates the main menu form.
> +
> + @retval EFI_SUCCESS update the main form success.
> +**/
> +EFI_STATUS
> +HiiPopulateMainMenuForm (
> + VOID
> + )
> +{
> + UINT8 Index;
> + CHAR8 *DiskName;
> + EFI_STRING_ID DiskNameId;
> + OPAL_DISK *OpalDisk;
> +
> + HiiSetCurrentConfiguration();
> +
> + gHiiConfiguration.SupportedDisks = 0;
> +
> + for (Index = 0; Index < gHiiConfiguration.NumDisks; Index++) {
> + OpalDisk = HiiGetOpalDiskCB (Index);
> + if ((OpalDisk != NULL) && OpalFeatureSupported
> (&OpalDisk->SupportedAttributes)) {
> + gHiiConfiguration.SupportedDisks |= (1 << Index);
> + DiskNameId = GetDiskNameStringId (Index);
> + DiskName = HiiDiskGetNameCB (Index);
> + if ((DiskName == NULL) || (DiskNameId == 0)) {
> + return EFI_UNSUPPORTED;
> + }
> + HiiSetFormString(DiskNameId, DiskName);
> + }
> + }
> +
> + OpalHiiSetBrowserData ();
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Get disk name string id.
> +
> + @param DiskIndex The input disk index info.
> +
> + @retval The disk name string id.
> +
> +**/
> +EFI_STRING_ID
> +GetDiskNameStringId(
> + UINT8 DiskIndex
> + )
> +{
> + switch (DiskIndex) {
> + case 0: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_0);
> + case 1: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_1);
> + case 2: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_2);
> + case 3: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_3);
> + case 4: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_4);
> + case 5: return STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_5);
> + }
> + return 0;
> +}
> +
> +/**
> + This function processes the results of changes in configuration.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Action Specifies the type of action taken by the
> browser.
> + @param QuestionId A unique value which is sent to the
> original
> + exporting driver so that it can identify
> the type
> + of data to expect.
> + @param Type The type of value for the question.
> + @param Value A pointer to the data being sent to the
> original
> + exporting driver.
> + @param ActionRequest On return, points to the action
> requested by the
> + callback function.
> +
> + @retval EFI_SUCCESS The callback successfully handled the
> action.
> + @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold
> the
> + variable and its data.
> + @retval EFI_DEVICE_ERROR The variable could not be saved.
> + @retval EFI_UNSUPPORTED The specified Action is not supported
> by the
> + callback.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +DriverCallback(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + EFI_BROWSER_ACTION Action,
> + EFI_QUESTION_ID QuestionId,
> + UINT8 Type,
> + EFI_IFR_TYPE_VALUE *Value,
> + EFI_BROWSER_ACTION_REQUEST *ActionRequest
> + )
> +{
> + HII_KEY HiiKey;
> + UINT8 HiiKeyId;
> + UINT32 PpRequest;
> + OPAL_DISK *OpalDisk;
> +
> + if (ActionRequest != NULL) {
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_NONE;
> + } else {
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + //
> + // If QuestionId is an auto-generated key (label, empty line, etc.), ignore it.
> + //
> + if ((QuestionId & HII_KEY_FLAG) == 0) {
> + return EFI_SUCCESS;
> + }
> +
> + HiiKey.Raw = QuestionId;
> + HiiKeyId = (UINT8) HiiKey.KeyBits.Id;
> +
> + if (Action == EFI_BROWSER_ACTION_FORM_OPEN) {
> + switch (HiiKeyId) {
> + case HII_KEY_ID_VAR_SUPPORTED_DISKS:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_VAR_SUPPORTED_DISKS\n"));
> + return HiiPopulateMainMenuForm ();
> +
> + case HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS:
> + DEBUG ((DEBUG_INFO,
> "HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS\n"));
> + return HiiPopulateDiskInfoForm();
> + }
> + } else if (Action == EFI_BROWSER_ACTION_CHANGING) {
> + switch (HiiKeyId) {
> + case HII_KEY_ID_GOTO_DISK_INFO:
> + return HiiSelectDisk((UINT8)HiiKey.KeyBits.Index);
> + }
> + } else if (Action == EFI_BROWSER_ACTION_CHANGED) {
> + switch (HiiKeyId) {
> + case HII_KEY_ID_BLOCKSID:
> + switch (Value->u8) {
> + case 0:
> + PpRequest = TCG2_PHYSICAL_PRESENCE_NO_ACTION;
> + break;
> +
> + case 1:
> + PpRequest = TCG2_PHYSICAL_PRESENCE_ENABLE_BLOCK_SID;
> + break;
> +
> + case 2:
> + PpRequest = TCG2_PHYSICAL_PRESENCE_DISABLE_BLOCK_SID;
> + break;
> +
> + case 3:
> + PpRequest =
> TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_ENABLE_BLOCK_SID_FU
> NC_TRUE;
> + break;
> +
> + case 4:
> + PpRequest =
> TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_ENABLE_BLOCK_SID_FU
> NC_FALSE;
> + break;
> +
> + case 5:
> + PpRequest =
> TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_DISABLE_BLOCK_SID_FU
> NC_TRUE;
> + break;
> +
> + case 6:
> + PpRequest =
> TCG2_PHYSICAL_PRESENCE_SET_PP_REQUIRED_FOR_DISABLE_BLOCK_SID_FU
> NC_FALSE;
> + break;
> +
> + default:
> + PpRequest = TCG2_PHYSICAL_PRESENCE_NO_ACTION;
> + DEBUG ((DEBUG_ERROR, "Invalid value input!\n"));
> + break;
> + }
> + HiiSetBlockSidAction(PpRequest);
> +
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_SET_ADMIN_PWD:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_SET_ADMIN_PWD\n"));
> + gHiiConfiguration.OpalRequest.SetAdminPwd = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_SET_USER_PWD:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_SET_USER_PWD\n"));
> + gHiiConfiguration.OpalRequest.SetUserPwd = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_SECURE_ERASE:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_SECURE_ERASE\n"));
> + gHiiConfiguration.OpalRequest.SecureErase = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_REVERT:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_REVERT\n"));
> + gHiiConfiguration.OpalRequest.Revert = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> + case HII_KEY_ID_KEEP_USER_DATA:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_KEEP_USER_DATA\n"));
> + gHiiConfiguration.OpalRequest.KeepUserData = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_PSID_REVERT:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_PSID_REVERT\n"));
> + gHiiConfiguration.OpalRequest.PsidRevert = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_DISABLE_USER:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_DISABLE_USER\n"));
> + gHiiConfiguration.OpalRequest.DisableUser = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + case HII_KEY_ID_ENABLE_FEATURE:
> + DEBUG ((DEBUG_INFO, "HII_KEY_ID_ENABLE_FEATURE\n"));
> + gHiiConfiguration.OpalRequest.EnableFeature = Value->b;
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> + if (OpalDisk != NULL) {
> + SaveOpalRequest (OpalDisk, gHiiConfiguration.OpalRequest);
> + }
> + *ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_APPLY;
> + return EFI_SUCCESS;
> +
> + default:
> + break;
> + }
> + }
> +
> + return EFI_UNSUPPORTED;
> +}
> +
> +/**
> + Update the global Disk index info.
> +
> + @param Index The input disk index info.
> +
> + @retval EFI_SUCCESS Update the disk index info success.
> +
> +**/
> +EFI_STATUS
> +HiiSelectDisk(
> + UINT8 Index
> + )
> +{
> + OpalHiiGetBrowserData();
> + gHiiConfiguration.SelectedDiskIndex = Index;
> + OpalHiiSetBrowserData ();
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Draws the disk info form.
> +
> + @retval EFI_SUCCESS Draw the disk info success.
> +
> +**/
> +EFI_STATUS
> +HiiPopulateDiskInfoForm(
> + VOID
> + )
> +{
> + OPAL_DISK* OpalDisk;
> + OPAL_DISK_ACTIONS AvailActions;
> + TCG_RESULT Ret;
> + CHAR8 *DiskName;
> +
> + OpalHiiGetBrowserData();
> +
> + DiskName = HiiDiskGetNameCB (gHiiConfiguration.SelectedDiskIndex);
> + if (DiskName == NULL) {
> + return EFI_UNSUPPORTED;
> + }
> + HiiSetFormString(STRING_TOKEN(STR_DISK_INFO_SELECTED_DISK_NAME),
> DiskName);
> +
> + gHiiConfiguration.SelectedDiskAvailableActions = HII_ACTION_NONE;
> + ZeroMem (&gHiiConfiguration.OpalRequest, sizeof (OPAL_REQUEST));
> + gHiiConfiguration.KeepUserDataForced = FALSE;
> +
> + OpalDisk = HiiGetOpalDiskCB(gHiiConfiguration.SelectedDiskIndex);
> +
> + if (OpalDisk != NULL) {
> + OpalDiskUpdateStatus (OpalDisk);
> + Ret = OpalSupportGetAvailableActions(&OpalDisk->SupportedAttributes,
> &OpalDisk->LockingFeature, OpalDisk->Owner, &AvailActions);
> + if (Ret == TcgResultSuccess) {
> + //
> + // Update actions, always allow PSID Revert
> + //
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.PsidRevert == 1) ? HII_ACTION_PSID_REVERT :
> HII_ACTION_NONE;
> +
> + //
> + // Always allow unlock to handle device migration
> + //
> + gHiiConfiguration.SelectedDiskAvailableActions |= (AvailActions.Unlock
> == 1) ? HII_ACTION_UNLOCK : HII_ACTION_NONE;
> +
> + if (!OpalFeatureEnabled (&OpalDisk->SupportedAttributes,
> &OpalDisk->LockingFeature)) {
> + if (OpalDisk->Owner == OpalOwnershipNobody) {
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> HII_ACTION_ENABLE_FEATURE;
> +
> + //
> + // Update strings
> + //
> + HiiSetFormString( STRING_TOKEN(STR_DISK_INFO_PSID_REVERT),
> "PSID Revert to factory default");
> + } else {
> + DEBUG ((DEBUG_INFO, "Feature disabled but ownership !=
> nobody\n"));
> + }
> + } else {
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.Revert == 1) ? HII_ACTION_REVERT : HII_ACTION_NONE;
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.AdminPass == 1) ? HII_ACTION_SET_ADMIN_PWD :
> HII_ACTION_NONE;
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.UserPass == 1) ? HII_ACTION_SET_USER_PWD :
> HII_ACTION_NONE;
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.SecureErase == 1) ? HII_ACTION_SECURE_ERASE :
> HII_ACTION_NONE;
> + gHiiConfiguration.SelectedDiskAvailableActions |=
> (AvailActions.DisableUser == 1) ? HII_ACTION_DISABLE_USER :
> HII_ACTION_NONE;
> +
> + HiiSetFormString (STRING_TOKEN(STR_DISK_INFO_PSID_REVERT),
> "PSID Revert to factory default and Disable");
> +
> + //
> + // Determine revert options for disk
> + // Default initialize keep user Data to be true
> + //
> + gHiiConfiguration.OpalRequest.KeepUserData = 1;
> + if (AvailActions.RevertKeepDataForced) {
> + gHiiConfiguration.KeepUserDataForced = TRUE;
> + }
> + }
> + }
> +
> + GetSavedOpalRequest (OpalDisk, &gHiiConfiguration.OpalRequest);
> + }
> +
> + //
> + // Pass the current configuration to the BIOS
> + //
> + OpalHiiSetBrowserData ();
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Send BlockSid request through TPM physical presence module.
> +
> + @param PpRequest TPM physical presence operation request.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiSetBlockSidAction (
> + IN UINT32 PpRequest
> + )
> +{
> + UINT32 ReturnCode;
> + EFI_STATUS Status;
> +
> + ReturnCode = Tcg2PhysicalPresenceLibSubmitRequestToPreOSFunction
> (PpRequest, 0);
> + if (ReturnCode == TCG_PP_SUBMIT_REQUEST_TO_PREOS_SUCCESS) {
> + Status = EFI_SUCCESS;
> + } else if (ReturnCode ==
> TCG_PP_SUBMIT_REQUEST_TO_PREOS_GENERAL_FAILURE) {
> + Status = EFI_OUT_OF_RESOURCES;
> + } else if (ReturnCode ==
> TCG_PP_SUBMIT_REQUEST_TO_PREOS_NOT_IMPLEMENTED) {
> + Status = EFI_UNSUPPORTED;
> + } else {
> + Status = EFI_DEVICE_ERROR;
> + }
> +
> + return Status;
> +}
> +
> +/**
> + This function processes the results of changes in configuration.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Configuration A null-terminated Unicode string in
> <ConfigResp>
> + format.
> + @param Progress A pointer to a string filled in with the
> offset of
> + the most recent '&' before the first
> failing
> + name/value pair (or the beginning of the
> string if
> + the failure is in the first name/value pair)
> or
> + the terminating NULL if all was
> successful.
> +
> + @retval EFI_SUCCESS The Results is processed successfully.
> + @retval EFI_INVALID_PARAMETER Configuration is NULL.
> + @retval EFI_NOT_FOUND Routing data doesn't match any
> storage in this
> + driver.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +RouteConfig(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + CONST EFI_STRING Configuration,
> + EFI_STRING *Progress
> + )
> +{
> + if (Configuration == NULL || Progress == NULL) {
> + return (EFI_INVALID_PARAMETER);
> + }
> +
> + *Progress = Configuration;
> + if (!HiiIsConfigHdrMatch (Configuration, &gHiiSetupVariableGuid,
> OpalPasswordStorageName)) {
> + return EFI_NOT_FOUND;
> + }
> +
> + *Progress = Configuration + StrLen (Configuration);
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + This function allows a caller to extract the current configuration for one
> + or more named elements from the target driver.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Request A null-terminated Unicode string in
> + <ConfigRequest> format.
> + @param Progress On return, points to a character in the
> Request
> + string. Points to the string's null
> terminator if
> + request was successful. Points to the
> most recent
> + '&' before the first failing name/value
> pair (or
> + the beginning of the string if the failure
> is in
> + the first name/value pair) if the request
> was not
> + successful.
> + @param Results A null-terminated Unicode string in
> + <ConfigAltResp> format which has all
> values filled
> + in for the names in the Request string.
> String to
> + be allocated by the called function.
> +
> + @retval EFI_SUCCESS The Results is filled with the requested
> values.
> + @retval EFI_OUT_OF_RESOURCES Not enough memory to store the
> results.
> + @retval EFI_INVALID_PARAMETER Request is illegal syntax, or unknown
> name.
> + @retval EFI_NOT_FOUND Routing data doesn't match any
> storage in this
> + driver.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ExtractConfig(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + CONST EFI_STRING Request,
> + EFI_STRING *Progress,
> + EFI_STRING *Results
> + )
> +{
> + EFI_STATUS Status;
> + EFI_STRING ConfigRequest;
> + EFI_STRING ConfigRequestHdr;
> + UINTN BufferSize;
> + UINTN Size;
> + BOOLEAN AllocatedRequest;
> + EFI_HANDLE DriverHandle;
> +
> + //
> + // Check for valid parameters
> + //
> + if (Progress == NULL || Results == NULL) {
> + return (EFI_INVALID_PARAMETER);
> + }
> +
> + *Progress = Request;
> + if ((Request != NULL) &&
> + !HiiIsConfigHdrMatch (Request, &gHiiSetupVariableGuid,
> OpalPasswordStorageName)) {
> + return EFI_NOT_FOUND;
> + }
> +
> + AllocatedRequest = FALSE;
> + BufferSize = sizeof (OPAL_HII_CONFIGURATION);
> + ConfigRequest = Request;
> + if ((Request == NULL) || (StrStr (Request, L"OFFSET") == NULL)) {
> + //
> + // Request has no request element, construct full request string.
> + // Allocate and fill a buffer large enough to hold the <ConfigHdr> template
> + // followed by "&OFFSET=0&WIDTH=WWWWWWWWWWWWWWWW"
> followed by a Null-terminator
> + //
> + DriverHandle = HiiGetDriverImageHandleCB();
> + ConfigRequestHdr = HiiConstructConfigHdr (&gHiiSetupVariableGuid,
> OpalPasswordStorageName, DriverHandle);
> + Size = (StrLen (ConfigRequestHdr) + 32 + 1) * sizeof (CHAR16);
> + ConfigRequest = AllocateZeroPool (Size);
> + if (ConfigRequest == NULL) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + AllocatedRequest = TRUE;
> + UnicodeSPrint (ConfigRequest, Size, L"%s&OFFSET=0&WIDTH=%016LX",
> ConfigRequestHdr, (UINT64)BufferSize);
> + FreePool (ConfigRequestHdr);
> + }
> +
> + //
> + // Convert Buffer Data to <ConfigResp> by helper function BlockToConfig( )
> + //
> + Status = gHiiConfigRouting->BlockToConfig(
> + gHiiConfigRouting,
> + ConfigRequest,
> + (UINT8*)&gHiiConfiguration,
> + sizeof(OPAL_HII_CONFIGURATION),
> + Results,
> + Progress
> + );
> +
> + //
> + // Free the allocated config request string.
> + //
> + if (AllocatedRequest) {
> + FreePool (ConfigRequest);
> + ConfigRequest = NULL;
> + }
> +
> + //
> + // Set Progress string to the original request string.
> + //
> + if (Request == NULL) {
> + *Progress = NULL;
> + } else if (StrStr (Request, L"OFFSET") == NULL) {
> + *Progress = Request + StrLen (Request);
> + }
> +
> + return (Status);
> +}
> +
> +
> +/**
> +
> + Pass the current system state to the bios via the hii_G_Configuration.
> +
> +**/
> +VOID
> +OpalHiiSetBrowserData (
> + VOID
> + )
> +{
> + HiiSetBrowserData(
> + &gHiiSetupVariableGuid,
> + (CHAR16*)L"OpalHiiConfig",
> + sizeof(gHiiConfiguration),
> + (UINT8*)&gHiiConfiguration,
> + NULL
> + );
> +}
> +
> +
> +/**
> +
> + Populate the hii_g_Configuraton with the browser Data.
> +
> +**/
> +VOID
> +OpalHiiGetBrowserData (
> + VOID
> + )
> +{
> + HiiGetBrowserData(
> + &gHiiSetupVariableGuid,
> + (CHAR16*)L"OpalHiiConfig",
> + sizeof(gHiiConfiguration),
> + (UINT8*)&gHiiConfiguration
> + );
> +}
> +
> +/**
> + Set a string Value in a form.
> +
> + @param DestStringId The stringid which need to update.
> + @param SrcAsciiStr The string nned to update.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiSetFormString(
> + EFI_STRING_ID DestStringId,
> + CHAR8 *SrcAsciiStr
> + )
> +{
> + UINT32 Len;
> + UINT32 UniSize;
> + CHAR16* UniStr;
> +
> + //
> + // Determine the Length of the sting
> + //
> + Len = ( UINT32 )AsciiStrLen( SrcAsciiStr );
> +
> + //
> + // Allocate space for the unicode string, including terminator
> + //
> + UniSize = (Len + 1) * sizeof(CHAR16);
> + UniStr = (CHAR16*)AllocateZeroPool(UniSize);
> +
> + //
> + // Copy into unicode string, then copy into string id
> + //
> + AsciiStrToUnicodeStrS ( SrcAsciiStr, UniStr, Len + 1);
> +
> + //
> + // Update the string in the form
> + //
> + if (HiiSetString(gHiiPackageListHandle, DestStringId, UniStr, NULL) == 0) {
> + DEBUG ((DEBUG_INFO, "HiiSetFormString( ) failed\n"));
> + FreePool(UniStr);
> + return (EFI_OUT_OF_RESOURCES);
> + }
> +
> + //
> + // Free the memory
> + //
> + FreePool(UniStr);
> +
> + return (EFI_SUCCESS);
> +}
> +
> +/**
> + Initialize the Opal disk base on the hardware info get from device.
> +
> + @param Dev The Opal device.
> +
> + @retval EFI_SUCESS Initialize the device success.
> + @retval EFI_DEVICE_ERROR Get info from device failed.
> +
> +**/
> +EFI_STATUS
> +OpalDiskInitialize (
> + IN OPAL_DRIVER_DEVICE *Dev
> + )
> +{
> + TCG_RESULT TcgResult;
> + OPAL_SESSION Session;
> +
> + ZeroMem(&Dev->OpalDisk, sizeof(OPAL_DISK));
> + Dev->OpalDisk.Sscp = Dev->Sscp;
> + Dev->OpalDisk.MediaId = Dev->MediaId;
> + Dev->OpalDisk.OpalDevicePath = Dev->OpalDevicePath;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = Dev->Sscp;
> + Session.MediaId = Dev->MediaId;
> +
> + TcgResult = OpalGetSupportedAttributesInfo (&Session,
> &Dev->OpalDisk.SupportedAttributes, &Dev->OpalDisk.OpalBaseComId);
> + if (TcgResult != TcgResultSuccess) {
> + return EFI_DEVICE_ERROR;
> + }
> + Session.OpalBaseComId = Dev->OpalDisk.OpalBaseComId;
> +
> + TcgResult = OpalUtilGetMsid (&Session, Dev->OpalDisk.Msid,
> OPAL_MSID_LENGHT, &Dev->OpalDisk.MsidLength);
> + if (TcgResult != TcgResultSuccess) {
> + return EFI_DEVICE_ERROR;
> + }
> +
> + return OpalDiskUpdateStatus (&Dev->OpalDisk);
> +}
> +
> +/**
> + Update the device info.
> +
> + @param OpalDisk The Opal device.
> +
> + @retval EFI_SUCESS Initialize the device success.
> + @retval EFI_DEVICE_ERROR Get info from device failed.
> + @retval EFI_INVALID_PARAMETER Not get Msid info before get ownership
> info.
> +
> +**/
> +EFI_STATUS
> +OpalDiskUpdateStatus (
> + OPAL_DISK *OpalDisk
> + )
> +{
> + TCG_RESULT TcgResult;
> + OPAL_SESSION Session;
> +
> + ZeroMem(&Session, sizeof(Session));
> + Session.Sscp = OpalDisk->Sscp;
> + Session.MediaId = OpalDisk->MediaId;
> + Session.OpalBaseComId = OpalDisk->OpalBaseComId;
> +
> + TcgResult = OpalGetLockingInfo(&Session, &OpalDisk->LockingFeature);
> + if (TcgResult != TcgResultSuccess) {
> + return EFI_DEVICE_ERROR;
> + }
> +
> + if (OpalDisk->MsidLength == 0) {
> + return EFI_INVALID_PARAMETER;
> + } else {
> + //
> + // Base on the Msid info to get the ownership, so Msid info must get first.
> + //
> + OpalDisk->Owner = OpalUtilDetermineOwnership(&Session,
> OpalDisk->Msid, OpalDisk->MsidLength);
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
> new file mode 100644
> index 000000000000..a1b1131c1380
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHii.h
> @@ -0,0 +1,380 @@
> +/** @file
> + Public Header file of HII library used by Opal UEFI Driver.
> + Defines required callbacks of Opal HII library.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef _OPAL_HII_H_
> +#define _OPAL_HII_H_
> +
> +#include <Protocol/HiiConfigAccess.h>
> +
> +#include "OpalDriver.h"
> +#include "OpalHiiFormValues.h"
> +
> +#define OPAL_PASSWORD_CONFIG_GUID \
> + { \
> + 0x0d510a4f, 0xa81b, 0x473f, { 0x87, 0x07, 0xb7, 0xfd, 0xfb, 0xc0, 0x45,
> 0xba } \
> + }
> +
> +#pragma pack(1)
> +
> +typedef struct {
> + UINT16 Id: HII_KEY_ID_BITS;
> + UINT16 Index: HII_KEY_INDEX_BITS;
> + UINT16 Flag: HII_KEY_FLAG_BITS;
> +} KEY_BITS;
> +
> +typedef union {
> + UINT16 Raw;
> + KEY_BITS KeyBits;
> +} HII_KEY;
> +
> +typedef struct {
> + VENDOR_DEVICE_PATH VendorDevicePath;
> + EFI_DEVICE_PATH_PROTOCOL End;
> +} HII_VENDOR_DEVICE_PATH;
> +
> +#pragma pack()
> +
> +extern const EFI_GUID gHiiSetupVariableGuid;
> +
> +/**
> + This function processes the results of changes in configuration.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Configuration A null-terminated Unicode string in
> <ConfigResp>
> + format.
> + @param Progress A pointer to a string filled in with the
> offset of
> + the most recent '&' before the first
> failing
> + name/value pair (or the beginning of the
> string if
> + the failure is in the first name/value pair)
> or
> + the terminating NULL if all was
> successful.
> +
> + @retval EFI_SUCCESS The Results is processed successfully.
> + @retval EFI_INVALID_PARAMETER Configuration is NULL.
> + @retval EFI_NOT_FOUND Routing data doesn't match any
> storage in this
> + driver.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +RouteConfig(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + CONST EFI_STRING Configuration,
> + EFI_STRING *Progress
> + );
> +
> +/**
> + This function allows a caller to extract the current configuration for one
> + or more named elements from the target driver.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Request A null-terminated Unicode string in
> + <ConfigRequest> format.
> + @param Progress On return, points to a character in the
> Request
> + string. Points to the string's null
> terminator if
> + request was successful. Points to the
> most recent
> + '&' before the first failing name/value
> pair (or
> + the beginning of the string if the failure
> is in
> + the first name/value pair) if the request
> was not
> + successful.
> + @param Results A null-terminated Unicode string in
> + <ConfigAltResp> format which has all
> values filled
> + in for the names in the Request string.
> String to
> + be allocated by the called function.
> +
> + @retval EFI_SUCCESS The Results is filled with the requested
> values.
> + @retval EFI_OUT_OF_RESOURCES Not enough memory to store the
> results.
> + @retval EFI_INVALID_PARAMETER Request is illegal syntax, or unknown
> name.
> + @retval EFI_NOT_FOUND Routing data doesn't match any
> storage in this
> + driver.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +ExtractConfig(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
> + CONST EFI_STRING Request,
> + EFI_STRING *Progress,
> + EFI_STRING *Results
> + );
> +
> +/**
> + This function processes the results of changes in configuration.
> +
> + @param This Points to the
> EFI_HII_CONFIG_ACCESS_PROTOCOL.
> + @param Action Specifies the type of action taken by the
> browser.
> + @param QuestionId A unique value which is sent to the
> original
> + exporting driver so that it can identify
> the type
> + of data to expect.
> + @param Type The type of value for the question.
> + @param Value A pointer to the data being sent to the
> original
> + exporting driver.
> + @param ActionRequest On return, points to the action
> requested by the
> + callback function.
> +
> + @retval EFI_SUCCESS The callback successfully handled the
> action.
> + @retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold
> the
> + variable and its data.
> + @retval EFI_DEVICE_ERROR The variable could not be saved.
> + @retval EFI_UNSUPPORTED The specified Action is not supported
> by the
> + callback.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +DriverCallback(
> + CONST EFI_HII_CONFIG_ACCESS_PROTOCOL* This,
> + EFI_BROWSER_ACTION Action,
> + EFI_QUESTION_ID QuestionId,
> + UINT8 Type,
> + EFI_IFR_TYPE_VALUE* Value,
> + EFI_BROWSER_ACTION_REQUEST* ActionRequest
> + );
> +
> +/**
> +
> + Pass the current system state to the bios via the hii_G_Configuration.
> +
> +**/
> +VOID
> +OpalHiiSetBrowserData (
> + VOID
> + );
> +
> +/**
> +
> + Populate the hii_g_Configuraton with the browser Data.
> +
> +**/
> +VOID
> +OpalHiiGetBrowserData (
> + VOID
> + );
> +
> +/**
> + Draws the disk info form.
> +
> + @retval EFI_SUCCESS Draw the disk info success.
> +
> +**/
> +EFI_STATUS
> +HiiPopulateDiskInfoForm(
> + VOID
> + );
> +
> +/**
> + Update the global Disk index info.
> +
> + @param Index The input disk index info.
> +
> + @retval EFI_SUCCESS Update the disk index info success.
> +
> +**/
> +EFI_STATUS
> +HiiSelectDisk(
> + UINT8 Index
> + );
> +
> +/**
> + Use the input password to do the specified action.
> +
> + @param Str The input password saved in.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiPasswordEntered(
> + EFI_STRING_ID Str
> + );
> +
> +/**
> + Update block sid info.
> +
> + @param PpRequest Input the Pp Request.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiSetBlockSidAction (
> + UINT32 PpRequest
> + );
> +
> +/**
> + Reverts the Opal disk to factory default.
> +
> + @param PsidStringId The string id for the PSID info.
> +
> + @retval EFI_SUCCESS Do the required action success.
> +
> +**/
> +EFI_STATUS
> +HiiPsidRevert(
> + EFI_STRING_ID PsidStringId
> + );
> +
> +/**
> + Get disk name string id.
> +
> + @param DiskIndex The input disk index info.
> +
> + @retval The disk name string id.
> +
> +**/
> +EFI_STRING_ID
> +GetDiskNameStringId(
> + UINT8 DiskIndex
> + );
> +
> +/**
> + Update the device info.
> +
> + @param OpalDisk The Opal device.
> +
> + @retval EFI_SUCESS Initialize the device success.
> + @retval EFI_DEVICE_ERROR Get info from device failed.
> + @retval EFI_INVALID_PARAMETER Not get Msid info before get ownership
> info.
> +
> +**/
> +EFI_STATUS
> +OpalDiskUpdateStatus (
> + OPAL_DISK *OpalDisk
> + );
> +
> +/**
> + Get the driver image handle.
> +
> + @retval the driver image handle.
> +
> +**/
> +EFI_HANDLE
> +HiiGetDriverImageHandleCB(
> + VOID
> + );
> +
> +/**
> + Install the HII form and string packages.
> +
> + @retval EFI_SUCCESS Install all the resources success.
> + @retval EFI_OUT_OF_RESOURCES Out of resource error.
> +**/
> +EFI_STATUS
> +OpalHiiAddPackages(
> + VOID
> + );
> +
> +/**
> + Check whether enable feature or not.
> +
> + @retval Return the disk number.
> +
> +**/
> +UINT8
> +HiiGetNumConfigRequiredOpalDisksCB(
> + VOID
> + );
> +
> +/**
> + Returns the driver name.
> +
> + @retval Returns the driver name.
> +
> +**/
> +CHAR16*
> +HiiGetDriverNameCB(
> + VOID
> + );
> +
> +/**
> + Returns the opaque pointer to a physical disk context.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval The device pointer.
> +
> +**/
> +OPAL_DISK*
> +HiiGetOpalDiskCB(
> + UINT8 DiskIndex
> + );
> +
> +/**
> + Returns the disk name.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval Returns the disk name.
> +
> +**/
> +CHAR8*
> +HiiDiskGetNameCB(
> + UINT8 DiskIndex
> + );
> +
> +/**
> + Set a string Value in a form.
> +
> + @param DestStringId The stringid which need to update.
> + @param SrcAsciiStr The string nned to update.
> +
> + @retval EFI_SUCCESS Do the required action success.
> + @retval Others Other error occur.
> +
> +**/
> +EFI_STATUS
> +HiiSetFormString(
> + EFI_STRING_ID DestStringId,
> + CHAR8 *SrcAsciiStr
> + );
> +
> +/**
> + Install the HII related resources.
> +
> + @retval EFI_SUCCESS Install all the resources success.
> + @retval other Error occur when install the resources.
> +**/
> +EFI_STATUS
> +HiiInstall(
> + VOID
> + );
> +
> +/**
> + Uninstall the HII capability.
> +
> + @retval EFI_SUCCESS Uninstall all the resources success.
> + @retval others Other errors occur when unistall the hii
> resource.
> +**/
> +EFI_STATUS
> +HiiUninstall(
> + VOID
> + );
> +
> +/**
> + Initialize the Opal disk base on the hardware info get from device.
> +
> + @param Dev The Opal device.
> +
> + @retval EFI_SUCESS Initialize the device success.
> + @retval EFI_DEVICE_ERROR Get info from device failed.
> +
> +**/
> +EFI_STATUS
> +OpalDiskInitialize (
> + IN OPAL_DRIVER_DEVICE *Dev
> + );
> +
> +#endif // _HII_H_
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
> new file mode 100644
> index 000000000000..b07e38c1449d
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiCallbacks.c
> @@ -0,0 +1,219 @@
> +/** @file
> + Callbacks required by the HII of the Opal UEFI Driver to help display
> + Opal device information.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalHii.h"
> +
> +/**
> + Get Opal var name.
> + The return Value must be freed by caller if not NULL
> +
> + @param OpalDisk The disk.
> + @param Prefix The prefix string.
> +
> + @retval The var name string.
> +
> +**/
> +CHAR16*
> +OpalDriverGetOpalVarName(
> + OPAL_DISK *OpalDisk,
> + const CHAR16 *Prefix
> + )
> +{
> + OPAL_DRIVER_DEVICE* Dev;
> + UINTN PrefixLen;
> + UINTN NameLen;
> + UINTN VarNameLen;
> + CHAR16* VarName;
> +
> + Dev = DRIVER_DEVICE_FROM_OPALDISK(OpalDisk);
> + if (Dev == NULL) {
> + return NULL;
> + }
> +
> + PrefixLen = StrLen(Prefix);
> +
> + NameLen = 0;
> + if (Dev->Name16 != NULL) {
> + NameLen = StrLen(Dev->Name16);
> + }
> +
> + VarNameLen = PrefixLen + NameLen;
> +
> + VarName = (CHAR16*)AllocateZeroPool((VarNameLen + 1) *
> sizeof(CHAR16));
> + if (VarName == NULL) {
> + return NULL;
> + }
> +
> + CopyMem(VarName, Prefix, PrefixLen * sizeof(CHAR16));
> + if (Dev->Name16 != NULL) {
> + CopyMem(VarName + PrefixLen, Dev->Name16, NameLen *
> sizeof(CHAR16));
> + }
> + VarName[VarNameLen] = 0;
> +
> + return VarName;
> +}
> +
> +/**
> + Get the driver image handle.
> +
> + @retval the driver image handle.
> +
> +**/
> +EFI_HANDLE
> +HiiGetDriverImageHandleCB(
> + VOID
> + )
> +{
> + return gImageHandle;
> +}
> +
> +/**
> + Check whether enable feature or not.
> +
> + @retval Return the disk number.
> +
> +**/
> +UINT8
> +HiiGetNumConfigRequiredOpalDisksCB(
> + VOID
> + )
> +{
> + UINT8 NumDisks;
> + UINT8 NumLockedOpalDisks;
> + OPAL_DISK *OpalDisk;
> + UINT8 Index;
> +
> + NumLockedOpalDisks = 0;
> +
> + NumDisks = GetDeviceCount();
> +
> + for (Index = 0; Index < NumDisks; Index++) {
> + OpalDisk = HiiGetOpalDiskCB(Index);
> +
> + if (OpalDisk != NULL) {
> + if (!OpalFeatureEnabled (&OpalDisk->SupportedAttributes,
> &OpalDisk->LockingFeature)) {
> + DEBUG ((DEBUG_INFO, "Ignoring disk %u because feature is disabled
> or health has already been inspected\n", Index));
> + } else if (OpalDeviceLocked (&OpalDisk->SupportedAttributes,
> &OpalDisk->LockingFeature)) {
> + NumLockedOpalDisks++;
> + }
> + }
> + }
> +
> + return NumLockedOpalDisks;
> +}
> +
> +
> +
> +/**
> + Returns the opaque pointer to a physical disk context.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval The device pointer.
> +
> +**/
> +VOID *
> +HiiGetDiskContextCB(
> + UINT8 DiskIndex
> + )
> +{
> + OPAL_DRIVER_DEVICE* Dev;
> + UINT8 CurrentDisk;
> +
> + Dev = OpalDriverGetDeviceList();
> + CurrentDisk = 0;
> +
> + if (DiskIndex >= GetDeviceCount()) {
> + return NULL;
> + }
> +
> + while (Dev != NULL) {
> + if (CurrentDisk == DiskIndex) {
> + return Dev;
> + } else {
> + Dev = Dev->Next;
> + CurrentDisk++;
> + }
> + }
> +
> + return NULL;
> +}
> +
> +/**
> + Returns the opaque pointer to a physical disk context.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval The device pointer.
> +
> +**/
> +OPAL_DISK*
> +HiiGetOpalDiskCB(
> + UINT8 DiskIndex
> + )
> +{
> + VOID *Ctx;
> + OPAL_DRIVER_DEVICE *Tmp;
> +
> + Ctx = HiiGetDiskContextCB (DiskIndex);
> +
> + if (Ctx == NULL) {
> + return NULL;
> + }
> +
> + Tmp = (OPAL_DRIVER_DEVICE*) Ctx;
> +
> + return &Tmp->OpalDisk;
> +}
> +
> +/**
> + Returns the disk name.
> +
> + @param DiskIndex Input the disk index.
> +
> + @retval Returns the disk name.
> +
> +**/
> +CHAR8*
> +HiiDiskGetNameCB(
> + UINT8 DiskIndex
> + )
> +{
> + OPAL_DRIVER_DEVICE* Ctx;
> +
> + Ctx = (OPAL_DRIVER_DEVICE*) HiiGetDiskContextCB (DiskIndex);
> +
> + if (Ctx != NULL) {
> + if (Ctx->NameZ == NULL) {
> + OpalDriverGetDriverDeviceName (Ctx);
> + }
> + return Ctx->NameZ;
> + }
> + return NULL;
> +}
> +
> +/**
> + Returns the driver name.
> +
> + @retval Returns the driver name.
> +
> +**/
> +CHAR16*
> +HiiGetDriverNameCB(
> + VOID
> + )
> +{
> + return (CHAR16*)EFI_DRIVER_NAME_UNICODE;
> +}
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
> new file mode 100644
> index 000000000000..69abc561cc56
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormStrings.uni
> @@ -0,0 +1,84 @@
> +// /** @file
> +//
> +// String definitions for Setup formset.
> +//
> +// Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +//
> +// This program and the accompanying materials
> +// are licensed and made available under the terms and conditions of the BSD
> License
> +// which accompanies this distribution. The full text of the license may be found
> at
> +// http://opensource.org/licenses/bsd-license.php
> +//
> +// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +//
> +// **/
> +
> +/=#
> +///////////////////////////////// GENERIC DEFINITIONS
> /////////////////////////////////
> +#langdef en-US "English"
> +#string STR_NULL #language en-US " "
> +
> +///////////////////////////////// FORM SET /////////////////////////////////
> +#string STR_FORM_SET_HELP #language en-US
> "Manage Opal disks"
> +
> +///////////////////////////////// MULTIPLE FORMS
> /////////////////////////////////
> +#string STR_OPAL #language en-US
> "Opal"
> +#string STR_MAIN_OPAL_VERSION #language en-US
> "Version 00.0.0.0000"
> +
> +///////////////////////////////// MAIN MENU FORM
> /////////////////////////////////
> +#string STR_MAIN_PHY_DISKS_LBL #language en-US
> "Physical Disks:"
> +
> +#string STR_MAIN_GOTO_DISK_INFO_0 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_1 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_2 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_3 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_4 #language en-US " "
> +#string STR_MAIN_GOTO_DISK_INFO_5 #language en-US " "
> +
> +#string STR_MAIN_GOTO_DISK_INFO_HELP #language en-US
> "Select to see Opal disk actions"
> +
> +#string STR_MAIN_NO_DISKS_PRESENT_LBL #language en-US
> "No disks connected to system"
> +
> +///////////////////////////////// DISK INFO MENU FORM
> /////////////////////////////////
> +#string STR_DISK_INFO_SELECTED_DISK_NAME #language en-US " "
> +
> +#string STR_DISK_INFO_LOCK #language en-US
> "Lock"
> +#string STR_DISK_INFO_UNLOCK #language en-US
> "Unlock"
> +#string STR_DISK_INFO_SET_ADMIN_PSWD #language en-US
> "Update Drive Admin Password"
> +#string STR_DISK_INFO_SET_USER_PSWD #language en-US
> "Set Drive User Password"
> +#string STR_DISK_INFO_SECURE_ERASE #language en-US
> "Secure Erase User Data"
> +#string STR_DISK_INFO_PSID_REVERT #language en-US
> "PSID Revert to factory default"
> +#string STR_DISK_INFO_REVERT #language en-US
> "Admin Revert to factory default and Disable"
> +#string STR_DISK_INFO_DISABLE_USER #language en-US
> "Disable User"
> +#string STR_DISK_INFO_ENABLE_FEATURE #language en-US
> "Enable Feature"
> +#string STR_DISK_INFO_ENABLE_BLOCKSID #language en-US
> "TCG Storage Action"
> +#string STR_ENABLED #language en-US
> "Enable BlockSID"
> +#string STR_DISABLED #language en-US
> "Disable BlockSID"
> +
> +#string STR_NONE #language en-US
> "None"
> +#string STR_DISK_INFO_ENABLE_BLOCKSID_TRUE #language en-US
> "Require physical presence when remote enable BlockSID"
> +#string STR_DISK_INFO_ENABLE_BLOCKSID_FALSE #language en-US
> "Not require physical presence when remote enable BlockSID"
> +#string STR_DISK_INFO_DISABLE_BLOCKSID_TRUE #language en-US
> "Require physical presence when remote disable BlockSID"
> +#string STR_DISK_INFO_DISABLE_BLOCKSID_FALSE #language en-US
> "Not require physical presence when remote disable BlockSID"
> +
> +#string STR_BLOCKSID_STATUS_HELP #language en-US
> "BlockSID action change status"
> +#string STR_BLOCKSID_STATUS #language en-US
> "Current BlockSID Status:"
> +#string STR_BLOCKSID_STATUS1 #language en-US ""
> +#string STR_BLOCKSID_STATUS2 #language en-US ""
> +#string STR_BLOCKSID_STATUS3 #language en-US ""
> +
> +#string STR_OPAL_REQUESTS_LBL #language en-US
> "Opal Requests:"
> +#string STR_DISK_INFO_LOCK_HELP #language en-US
> "Lock the disk"
> +#string STR_DISK_INFO_UNLOCK_HELP #language en-US
> "Unlock the disk"
> +#string STR_DISK_INFO_SET_ADMIN_PSWD_HELP #language en-US
> "Set password for the administrator"
> +#string STR_DISK_INFO_SET_USER_PSWD_HELP #language en-US
> "Set password for User 1"
> +#string STR_DISK_INFO_SECURE_ERASE_HELP #language en-US
> "Securely erase the disk"
> +#string STR_DISK_INFO_REVERT_HELP #language en-US
> "Revert the disk to factory defaults"
> +#string STR_DISK_INFO_PSID_REVERT_HELP #language en-US
> "Revert the disk to factory defaults, PSID is a 32 character case sensitive value"
> +#string STR_DISK_INFO_DISABLE_USER_HELP #language en-US
> "Disable User"
> +#string STR_DISK_INFO_ENABLE_FEATURE_HELP #language en-US
> "Enable Feature"
> +#string STR_KEEP_USER_DATA_PROMPT #language en-US "
> Keep User Data"
> +#string STR_KEEP_USER_DATA_HELP #language en-US
> "Check to keep user data, otherwise data will be lost"
> +
> +#string STR_DISK_INFO_ENABLE_BLOCKSID_HELP #language en-US
> "Change BlockSID actions, includes enable or disable BlockSID, Require or not
> require physical presence when remote enable or disable BlockSID"
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
> new file mode 100644
> index 000000000000..3ff7d4726d5e
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalHiiFormValues.h
> @@ -0,0 +1,123 @@
> +/** @file
> + Defines Opal HII form ids, structures and values.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +
> +#ifndef _OPAL_HII_FORM_VALUES_H_
> +#define _OPAL_HII_FORM_VALUES_H_
> +
> +// ID's for various forms that will be used by HII
> +#define FORMID_VALUE_MAIN_MENU 0x01
> +#define FORMID_VALUE_DISK_INFO_FORM_MAIN 0x02
> +
> +#define OPAL_REQUEST_VARIABLE_NAME
> L"OpalRequest"
> +
> +#pragma pack(1)
> +typedef struct {
> + UINT16 Lock:1;
> + UINT16 Unlock:1;
> + UINT16 SetAdminPwd:1;
> + UINT16 SetUserPwd:1;
> + UINT16 SecureErase:1;
> + UINT16 Revert:1;
> + UINT16 PsidRevert:1;
> + UINT16 DisableUser:1;
> + UINT16 DisableFeature:1;
> + UINT16 EnableFeature:1;
> + UINT16 Reserved:5;
> + UINT16 KeepUserData:1;
> +} OPAL_REQUEST;
> +
> +typedef struct {
> + UINT8 NumDisks;
> + UINT8 SelectedDiskIndex;
> + UINT16 SelectedDiskAvailableActions;
> + UINT16 SupportedDisks;
> + BOOLEAN KeepUserDataForced;
> + OPAL_REQUEST OpalRequest;
> + UINT8 EnableBlockSid;
> +} OPAL_HII_CONFIGURATION;
> +
> +typedef struct {
> + UINT32 Length;
> + OPAL_REQUEST OpalRequest;
> + //EFI_DEVICE_PATH_PROTOCOL OpalDevicePath;
> +} OPAL_REQUEST_VARIABLE;
> +
> +#pragma pack()
> +
> +/* Action Flags */
> +#define HII_ACTION_NONE
> 0x0000
> +#define HII_ACTION_LOCK
> 0x0001
> +#define HII_ACTION_UNLOCK
> 0x0002
> +#define HII_ACTION_SET_ADMIN_PWD
> 0x0004
> +#define HII_ACTION_SET_USER_PWD
> 0x0008
> +#define HII_ACTION_SECURE_ERASE
> 0x0010
> +#define HII_ACTION_REVERT
> 0x0020
> +#define HII_ACTION_PSID_REVERT
> 0x0040
> +#define HII_ACTION_DISABLE_USER
> 0x0080
> +#define HII_ACTION_DISABLE_FEATURE
> 0x0100
> +#define HII_ACTION_ENABLE_FEATURE
> 0x0200
> +
> +/* Number of bits allocated for each part of a unique key for an HII_ITEM
> + * all bits together must be <= 16 (EFI_QUESTION_ID is UINT16)
> + * 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
> + * | |-----------------------| |---------------------------|
> + * FLG INDEX ID
> + */
> +#define HII_KEY_ID_BITS 8
> +#define HII_KEY_INDEX_BITS 7
> +#define HII_KEY_FLAG_BITS 1
> +
> +#define HII_KEY_FLAG 0x8000
> // bit 15 (zero based)
> +
> +/***********/
> +/* Key IDs */
> +/***********/
> +
> +#define HII_KEY_ID_GOTO_DISK_INFO 1
> +
> +#define HII_KEY_ID_VAR_SUPPORTED_DISKS 2
> +#define HII_KEY_ID_VAR_SELECTED_DISK_AVAILABLE_ACTIONS 3
> +
> +#define HII_KEY_ID_BLOCKSID 4
> +#define HII_KEY_ID_SET_ADMIN_PWD 5
> +#define HII_KEY_ID_SET_USER_PWD 6
> +#define HII_KEY_ID_SECURE_ERASE 7
> +#define HII_KEY_ID_REVERT 8
> +#define HII_KEY_ID_KEEP_USER_DATA 9
> +#define HII_KEY_ID_PSID_REVERT 0xA
> +#define HII_KEY_ID_DISABLE_USER 0xB
> +#define HII_KEY_ID_ENABLE_FEATURE 0xC
> +
> +#define HII_KEY_ID_MAX 0xC
> // !!Update each time a new ID is added!!
> +
> +#define HII_KEY_WITH_INDEX(id, index) \
> + ( \
> + HII_KEY_FLAG | \
> + (id) | \
> + ((index) << HII_KEY_ID_BITS) \
> + )
> +
> +#define HII_KEY(id) HII_KEY_WITH_INDEX(id, 0)
> +
> +#define PACKAGE_LIST_GUID { 0xf0308176, 0x9058, 0x4153, { 0x93, 0x3d,
> 0xda, 0x2f, 0xdc, 0xc8, 0x3e, 0x44 } }
> +
> +/* {410483CF-F4F9-4ece-848A-1958FD31CEB7} */
> +#define SETUP_FORMSET_GUID { 0x410483cf, 0xf4f9, 0x4ece, { 0x84, 0x8a,
> 0x19, 0x58, 0xfd, 0x31, 0xce, 0xb7 } }
> +
> +// {BBF1ACD2-28D8-44ea-A291-58A237FEDF1A}
> +#define SETUP_VARIABLE_GUID { 0xbbf1acd2, 0x28d8, 0x44ea, { 0xa2, 0x91,
> 0x58, 0xa2, 0x37, 0xfe, 0xdf, 0x1a } }
> +
> +#endif //_HII_FORM_VALUES_H_
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
> new file mode 100644
> index 000000000000..7657bb26e23c
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.c
> @@ -0,0 +1,2144 @@
> +/** @file
> + Provide functions to initialize NVME controller and perform NVME
> commands
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalPasswordPei.h"
> +
> +
> +#define ALIGN(v, a) (UINTN)((((v) - 1) | ((a) - 1)) +
> 1)
> +
> +///
> +/// NVME Host controller registers operation
> +///
> +#define NVME_GET_CAP(Nvme, Cap) NvmeMmioRead (Cap,
> Nvme->Nbar + NVME_CAP_OFFSET, sizeof (NVME_CAP))
> +#define NVME_GET_CC(Nvme, Cc) NvmeMmioRead (Cc,
> Nvme->Nbar + NVME_CC_OFFSET, sizeof (NVME_CC))
> +#define NVME_SET_CC(Nvme, Cc) NvmeMmioWrite
> (Nvme->Nbar + NVME_CC_OFFSET, Cc, sizeof (NVME_CC))
> +#define NVME_GET_CSTS(Nvme, Csts) NvmeMmioRead (Csts,
> Nvme->Nbar + NVME_CSTS_OFFSET, sizeof (NVME_CSTS))
> +#define NVME_GET_AQA(Nvme, Aqa) NvmeMmioRead (Aqa,
> Nvme->Nbar + NVME_AQA_OFFSET, sizeof (NVME_AQA))
> +#define NVME_SET_AQA(Nvme, Aqa) NvmeMmioWrite
> (Nvme->Nbar + NVME_AQA_OFFSET, Aqa, sizeof (NVME_AQA))
> +#define NVME_GET_ASQ(Nvme, Asq) NvmeMmioRead (Asq,
> Nvme->Nbar + NVME_ASQ_OFFSET, sizeof (NVME_ASQ))
> +#define NVME_SET_ASQ(Nvme, Asq) NvmeMmioWrite
> (Nvme->Nbar + NVME_ASQ_OFFSET, Asq, sizeof (NVME_ASQ))
> +#define NVME_GET_ACQ(Nvme, Acq) NvmeMmioRead (Acq,
> Nvme->Nbar + NVME_ACQ_OFFSET, sizeof (NVME_ACQ))
> +#define NVME_SET_ACQ(Nvme, Acq) NvmeMmioWrite
> (Nvme->Nbar + NVME_ACQ_OFFSET, Acq, sizeof (NVME_ACQ))
> +#define NVME_GET_VER(Nvme, Ver) NvmeMmioRead (Ver,
> Nvme->Nbar + NVME_VER_OFFSET, sizeof (NVME_VER))
> +#define NVME_SET_SQTDBL(Nvme, Qid, Sqtdbl) NvmeMmioWrite
> (Nvme->Nbar + NVME_SQTDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Sqtdbl, sizeof
> (NVME_SQTDBL))
> +#define NVME_SET_CQHDBL(Nvme, Qid, Cqhdbl) NvmeMmioWrite
> (Nvme->Nbar + NVME_CQHDBL_OFFSET(Qid, Nvme->Cap.Dstrd), Cqhdbl, sizeof
> (NVME_CQHDBL))
> +
> +///
> +/// Base memory address
> +///
> +enum {
> + BASEMEM_CONTROLLER_DATA,
> + BASEMEM_IDENTIFY_DATA,
> + BASEMEM_ASQ,
> + BASEMEM_ACQ,
> + BASEMEM_SQ,
> + BASEMEM_CQ,
> + BASEMEM_PRP,
> + BASEMEM_SECURITY,
> + MAX_BASEMEM_COUNT
> +};
> +
> +///
> +/// All of base memories are 4K(0x1000) alignment
> +///
> +#define NVME_MEM_BASE(Nvme)
> ((UINTN)(Nvme->BaseMem))
> +#define NVME_CONTROL_DATA_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages
> (BASEMEM_CONTROLLER_DATA)) * EFI_PAGE_SIZE),
> EFI_PAGE_SIZE))
> +#define NVME_NAMESPACE_DATA_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages
> (BASEMEM_IDENTIFY_DATA)) * EFI_PAGE_SIZE),
> EFI_PAGE_SIZE))
> +#define NVME_ASQ_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ASQ))
> * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_ACQ_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_ACQ))
> * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_SQ_BASE(Nvme, index) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SQ) +
> ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_CQ_BASE(Nvme, index) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_CQ) +
> ((index)*(NVME_MAX_IO_QUEUES-1))) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_PRP_BASE(Nvme, index) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_PRP) +
> ((index)*NVME_PRP_SIZE)) * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +#define NVME_SEC_BASE(Nvme) (ALIGN
> (NVME_MEM_BASE(Nvme) + ((NvmeGetBaseMemPages (BASEMEM_SECURITY))
> * EFI_PAGE_SIZE), EFI_PAGE_SIZE))
> +
> +/**
> + Transfer MMIO Data to memory.
> +
> + @param[in,out] MemBuffer - Destination: Memory address
> + @param[in] MmioAddr - Source: MMIO address
> + @param[in] Size - Size for read
> +
> + @retval EFI_SUCCESS - MMIO read sucessfully
> +**/
> +EFI_STATUS
> +NvmeMmioRead (
> + IN OUT VOID *MemBuffer,
> + IN UINTN MmioAddr,
> + IN UINTN Size
> + )
> +{
> + UINTN Offset;
> + UINT8 Data;
> + UINT8 *Ptr;
> +
> + // priority has adjusted
> + switch (Size) {
> + case 4:
> + *((UINT32 *)MemBuffer) = MmioRead32 (MmioAddr);
> + break;
> +
> + case 8:
> + *((UINT64 *)MemBuffer) = MmioRead64 (MmioAddr);
> + break;
> +
> + case 2:
> + *((UINT16 *)MemBuffer) = MmioRead16 (MmioAddr);
> + break;
> +
> + case 1:
> + *((UINT8 *)MemBuffer) = MmioRead8 (MmioAddr);
> + break;
> +
> + default:
> + Ptr = (UINT8 *)MemBuffer;
> + for (Offset = 0; Offset < Size; Offset += 1) {
> + Data = MmioRead8 (MmioAddr + Offset);
> + Ptr[Offset] = Data;
> + }
> + break;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Transfer memory data to MMIO.
> +
> + @param[in,out] MmioAddr - Destination: MMIO address
> + @param[in] MemBuffer - Source: Memory address
> + @param[in] Size - Size for write
> +
> + @retval EFI_SUCCESS - MMIO write sucessfully
> +**/
> +EFI_STATUS
> +NvmeMmioWrite (
> + IN OUT UINTN MmioAddr,
> + IN VOID *MemBuffer,
> + IN UINTN Size
> + )
> +{
> + UINTN Offset;
> + UINT8 Data;
> + UINT8 *Ptr;
> +
> + // priority has adjusted
> + switch (Size) {
> + case 4:
> + MmioWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
> + break;
> +
> + case 8:
> + MmioWrite64 (MmioAddr, *((UINT64 *)MemBuffer));
> + break;
> +
> + case 2:
> + MmioWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
> + break;
> +
> + case 1:
> + MmioWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
> + break;
> +
> + default:
> + Ptr = (UINT8 *)MemBuffer;
> + for (Offset = 0; Offset < Size; Offset += 1) {
> + Data = Ptr[Offset];
> + MmioWrite8 (MmioAddr + Offset, Data);
> + }
> + break;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Transfer MMIO data to memory.
> +
> + @param[in,out] MemBuffer - Destination: Memory address
> + @param[in] MmioAddr - Source: MMIO address
> + @param[in] Size - Size for read
> +
> + @retval EFI_SUCCESS - MMIO read sucessfully
> +**/
> +EFI_STATUS
> +OpalPciRead (
> + IN OUT VOID *MemBuffer,
> + IN UINTN MmioAddr,
> + IN UINTN Size
> + )
> +{
> + UINTN Offset;
> + UINT8 Data;
> + UINT8 *Ptr;
> +
> + // priority has adjusted
> + switch (Size) {
> + case 4:
> + *((UINT32 *)MemBuffer) = PciRead32 (MmioAddr);
> + break;
> +
> + case 2:
> + *((UINT16 *)MemBuffer) = PciRead16 (MmioAddr);
> + break;
> +
> + case 1:
> + *((UINT8 *)MemBuffer) = PciRead8 (MmioAddr);
> + break;
> +
> + default:
> + Ptr = (UINT8 *)MemBuffer;
> + for (Offset = 0; Offset < Size; Offset += 1) {
> + Data = PciRead8 (MmioAddr + Offset);
> + Ptr[Offset] = Data;
> + }
> + break;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Transfer memory data to MMIO.
> +
> + @param[in,out] MmioAddr - Destination: MMIO address
> + @param[in] MemBuffer - Source: Memory address
> + @param[in] Size - Size for write
> +
> + @retval EFI_SUCCESS - MMIO write sucessfully
> +**/
> +EFI_STATUS
> +OpalPciWrite (
> + IN OUT UINTN MmioAddr,
> + IN VOID *MemBuffer,
> + IN UINTN Size
> + )
> +{
> + UINTN Offset;
> + UINT8 Data;
> + UINT8 *Ptr;
> +
> + // priority has adjusted
> + switch (Size) {
> + case 4:
> + PciWrite32 (MmioAddr, *((UINT32 *)MemBuffer));
> + break;
> +
> + case 2:
> + PciWrite16 (MmioAddr, *((UINT16 *)MemBuffer));
> + break;
> +
> + case 1:
> + PciWrite8 (MmioAddr, *((UINT8 *)MemBuffer));
> + break;
> +
> + default:
> + Ptr = (UINT8 *)MemBuffer;
> + for (Offset = 0; Offset < Size; Offset += 1) {
> + Data = Ptr[Offset];
> + PciWrite8 (MmioAddr + Offset, Data);
> + }
> + break;
> + }
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Get total pages for specific NVME based memory.
> +
> + @param[in] BaseMemIndex - The Index of BaseMem (0-based).
> +
> + @retval - The page count for specific BaseMem Index
> +
> +**/
> +UINT32
> +NvmeGetBaseMemPages (
> + IN UINTN BaseMemIndex
> + )
> +{
> + UINT32 Pages;
> + UINTN Index;
> + UINT32 PageSizeList[8];
> +
> + PageSizeList[0] = 1; /* Controller Data */
> + PageSizeList[1] = 1; /* Identify Data */
> + PageSizeList[2] = 1; /* ASQ */
> + PageSizeList[3] = 1; /* ACQ */
> + PageSizeList[4] = 1; /* SQs */
> + PageSizeList[5] = 1; /* CQs */
> + PageSizeList[6] = NVME_PRP_SIZE * NVME_CSQ_DEPTH; /* PRPs */
> + PageSizeList[7] = 1; /* Security Commands */
> +
> + if (BaseMemIndex > MAX_BASEMEM_COUNT) {
> + ASSERT (FALSE);
> + return 0;
> + }
> +
> + Pages = 0;
> + for (Index = 0; Index < BaseMemIndex; Index++) {
> + Pages += PageSizeList[Index];
> + }
> +
> + return Pages;
> +}
> +
> +/**
> + Wait for NVME controller status to be ready or not.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] WaitReady - Flag for waitting status ready or not
> +
> + @return EFI_SUCCESS - Successfully to wait specific status.
> + @return others - Fail to wait for specific controller
> status.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeWaitController (
> + IN NVME_CONTEXT *Nvme,
> + IN BOOLEAN WaitReady
> + )
> +{
> + NVME_CSTS Csts;
> + EFI_STATUS Status;
> + UINT32 Index;
> + UINT8 Timeout;
> +
> + //
> + // Cap.To specifies max delay time in 500ms increments for Csts.Rdy to set
> after
> + // Cc.Enable. Loop produces a 1 millisecond delay per itteration, up to 500 *
> Cap.To.
> + //
> + if (Nvme->Cap.To == 0) {
> + Timeout = 1;
> + } else {
> + Timeout = Nvme->Cap.To;
> + }
> +
> + Status = EFI_SUCCESS;
> + for(Index = (Timeout * 500); Index != 0; --Index) {
> + MicroSecondDelay (1000);
> +
> + //
> + // Check if the controller is initialized
> + //
> + Status = NVME_GET_CSTS (Nvme, &Csts);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n",
> Status));
> + return Status;
> + }
> +
> + if ((BOOLEAN) Csts.Rdy == WaitReady) {
> + break;
> + }
> + }
> +
> + if (Index == 0) {
> + Status = EFI_TIMEOUT;
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Disable the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully disable the controller.
> + @return others - Fail to disable the controller.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeDisableController (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVME_CC Cc;
> + NVME_CSTS Csts;
> + EFI_STATUS Status;
> +
> + Status = NVME_GET_CSTS (Nvme, &Csts);
> +
> + ///
> + /// Read Controller Configuration Register.
> + ///
> + Status = NVME_GET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
> + goto Done;
> + }
> +
> + if (Cc.En == 1) {
> + Cc.En = 0;
> + ///
> + /// Disable the controller.
> + ///
> + Status = NVME_SET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
> + goto Done;
> + }
> + }
> +
> + Status = NvmeWaitController (Nvme, FALSE);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n",
> Status));
> + goto Done;
> + }
> +
> + return EFI_SUCCESS;
> +
> +Done:
> + DEBUG ((DEBUG_INFO, "NvmeDisableController fail, Status: %r\n", Status));
> + return Status;
> +}
> +
> +/**
> + Enable the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully enable the controller.
> + @return EFI_DEVICE_ERROR - Fail to enable the controller.
> + @return EFI_TIMEOUT - Fail to enable the controller in
> given time slot.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeEnableController (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVME_CC Cc;
> + EFI_STATUS Status;
> +
> + //
> + // Enable the controller
> + //
> + ZeroMem (&Cc, sizeof (NVME_CC));
> + Cc.En = 1;
> + Cc.Iosqes = 6;
> + Cc.Iocqes = 4;
> + Status = NVME_SET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
> + goto Done;
> + }
> +
> + Status = NvmeWaitController (Nvme, TRUE);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeWaitController fail, Status = %r\n",
> Status));
> + goto Done;
> + }
> +
> + return EFI_SUCCESS;
> +
> +Done:
> + DEBUG ((DEBUG_INFO, "NvmeEnableController fail, Status: %r\n", Status));
> + return Status;
> +}
> +
> +/**
> + Shutdown the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully shutdown the
> controller.
> + @return EFI_DEVICE_ERROR - Fail to shutdown the controller.
> + @return EFI_TIMEOUT - Fail to shutdown the controller in
> given time slot.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeShutdownController (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVME_CC Cc;
> + NVME_CSTS Csts;
> + EFI_STATUS Status;
> + UINT32 Index;
> + UINTN Timeout;
> +
> + Status = NVME_GET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CC fail, Status = %r\n", Status));
> + return Status;
> + }
> +
> + Cc.Shn = 1; // Normal shutdown
> +
> + Status = NVME_SET_CC (Nvme, &Cc);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_SET_CC fail, Status = %r\n", Status));
> + return Status;
> + }
> +
> + Timeout = NVME_GENERIC_TIMEOUT/1000; // ms
> + for(Index = (UINT32)(Timeout); Index != 0; --Index) {
> + MicroSecondDelay (1000);
> +
> + Status = NVME_GET_CSTS (Nvme, &Csts);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CSTS fail, Status = %r\n",
> Status));
> + return Status;
> + }
> +
> + if (Csts.Shst == 2) { // Shutdown processing complete
> + break;
> + }
> + }
> +
> + if (Index == 0) {
> + Status = EFI_TIMEOUT;
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Check the execution status from a given completion queue entry.
> +
> + @param[in] Cq - A pointer to the NVME_CQ item.
> +
> +**/
> +EFI_STATUS
> +NvmeCheckCqStatus (
> + IN NVME_CQ *Cq
> + )
> +{
> + if (Cq->Sct == 0x0 && Cq->Sc == 0x0) {
> + return EFI_SUCCESS;
> + }
> +
> + DEBUG ((DEBUG_INFO, "Dump NVMe Completion Entry Status from
> [0x%x]:\n", (UINTN)Cq));
> + DEBUG ((DEBUG_INFO, " SQ Identifier : [0x%x], Phase Tag : [%d], Cmd
> Identifier : [0x%x]\n", Cq->Sqid, Cq->Pt, Cq->Cid));
> + DEBUG ((DEBUG_INFO, " NVMe Cmd Execution Result - "));
> +
> + switch (Cq->Sct) {
> + case 0x0:
> + switch (Cq->Sc) {
> + case 0x0:
> + DEBUG ((DEBUG_INFO, "Successful Completion\n"));
> + return EFI_SUCCESS;
> + case 0x1:
> + DEBUG ((DEBUG_INFO, "Invalid Command Opcode\n"));
> + break;
> + case 0x2:
> + DEBUG ((DEBUG_INFO, "Invalid Field in Command\n"));
> + break;
> + case 0x3:
> + DEBUG ((DEBUG_INFO, "Command ID Conflict\n"));
> + break;
> + case 0x4:
> + DEBUG ((DEBUG_INFO, "Data Transfer Error\n"));
> + break;
> + case 0x5:
> + DEBUG ((DEBUG_INFO, "Commands Aborted due to Power Loss
> Notification\n"));
> + break;
> + case 0x6:
> + DEBUG ((DEBUG_INFO, "Internal Device Error\n"));
> + break;
> + case 0x7:
> + DEBUG ((DEBUG_INFO, "Command Abort Requested\n"));
> + break;
> + case 0x8:
> + DEBUG ((DEBUG_INFO, "Command Aborted due to SQ
> Deletion\n"));
> + break;
> + case 0x9:
> + DEBUG ((DEBUG_INFO, "Command Aborted due to Failed Fused
> Command\n"));
> + break;
> + case 0xA:
> + DEBUG ((DEBUG_INFO, "Command Aborted due to Missing Fused
> Command\n"));
> + break;
> + case 0xB:
> + DEBUG ((DEBUG_INFO, "Invalid Namespace or Format\n"));
> + break;
> + case 0xC:
> + DEBUG ((DEBUG_INFO, "Command Sequence Error\n"));
> + break;
> + case 0xD:
> + DEBUG ((DEBUG_INFO, "Invalid SGL Last Segment Descriptor\n"));
> + break;
> + case 0xE:
> + DEBUG ((DEBUG_INFO, "Invalid Number of SGL Descriptors\n"));
> + break;
> + case 0xF:
> + DEBUG ((DEBUG_INFO, "Data SGL Length Invalid\n"));
> + break;
> + case 0x10:
> + DEBUG ((DEBUG_INFO, "Metadata SGL Length Invalid\n"));
> + break;
> + case 0x11:
> + DEBUG ((DEBUG_INFO, "SGL Descriptor Type Invalid\n"));
> + break;
> + case 0x80:
> + DEBUG ((DEBUG_INFO, "LBA Out of Range\n"));
> + break;
> + case 0x81:
> + DEBUG ((DEBUG_INFO, "Capacity Exceeded\n"));
> + break;
> + case 0x82:
> + DEBUG ((DEBUG_INFO, "Namespace Not Ready\n"));
> + break;
> + case 0x83:
> + DEBUG ((DEBUG_INFO, "Reservation Conflict\n"));
> + break;
> + }
> + break;
> +
> + case 0x1:
> + switch (Cq->Sc) {
> + case 0x0:
> + DEBUG ((DEBUG_INFO, "Completion Queue Invalid\n"));
> + break;
> + case 0x1:
> + DEBUG ((DEBUG_INFO, "Invalid Queue Identifier\n"));
> + break;
> + case 0x2:
> + DEBUG ((DEBUG_INFO, "Maximum Queue Size Exceeded\n"));
> + break;
> + case 0x3:
> + DEBUG ((DEBUG_INFO, "Abort Command Limit Exceeded\n"));
> + break;
> + case 0x5:
> + DEBUG ((DEBUG_INFO, "Asynchronous Event Request Limit
> Exceeded\n"));
> + break;
> + case 0x6:
> + DEBUG ((DEBUG_INFO, "Invalid Firmware Slot\n"));
> + break;
> + case 0x7:
> + DEBUG ((DEBUG_INFO, "Invalid Firmware Image\n"));
> + break;
> + case 0x8:
> + DEBUG ((DEBUG_INFO, "Invalid Interrupt Vector\n"));
> + break;
> + case 0x9:
> + DEBUG ((DEBUG_INFO, "Invalid Log Page\n"));
> + break;
> + case 0xA:
> + DEBUG ((DEBUG_INFO, "Invalid Format\n"));
> + break;
> + case 0xB:
> + DEBUG ((DEBUG_INFO, "Firmware Application Requires
> Conventional Reset\n"));
> + break;
> + case 0xC:
> + DEBUG ((DEBUG_INFO, "Invalid Queue Deletion\n"));
> + break;
> + case 0xD:
> + DEBUG ((DEBUG_INFO, "Feature Identifier Not Saveable\n"));
> + break;
> + case 0xE:
> + DEBUG ((DEBUG_INFO, "Feature Not Changeable\n"));
> + break;
> + case 0xF:
> + DEBUG ((DEBUG_INFO, "Feature Not Namespace Specific\n"));
> + break;
> + case 0x10:
> + DEBUG ((DEBUG_INFO, "Firmware Application Requires NVM
> Subsystem Reset\n"));
> + break;
> + case 0x80:
> + DEBUG ((DEBUG_INFO, "Conflicting Attributes\n"));
> + break;
> + case 0x81:
> + DEBUG ((DEBUG_INFO, "Invalid Protection Information\n"));
> + break;
> + case 0x82:
> + DEBUG ((DEBUG_INFO, "Attempted Write to Read Only Range\n"));
> + break;
> + }
> + break;
> +
> + case 0x2:
> + switch (Cq->Sc) {
> + case 0x80:
> + DEBUG ((DEBUG_INFO, "Write Fault\n"));
> + break;
> + case 0x81:
> + DEBUG ((DEBUG_INFO, "Unrecovered Read Error\n"));
> + break;
> + case 0x82:
> + DEBUG ((DEBUG_INFO, "End-to-end Guard Check Error\n"));
> + break;
> + case 0x83:
> + DEBUG ((DEBUG_INFO, "End-to-end Application Tag Check
> Error\n"));
> + break;
> + case 0x84:
> + DEBUG ((DEBUG_INFO, "End-to-end Reference Tag Check
> Error\n"));
> + break;
> + case 0x85:
> + DEBUG ((DEBUG_INFO, "Compare Failure\n"));
> + break;
> + case 0x86:
> + DEBUG ((DEBUG_INFO, "Access Denied\n"));
> + break;
> + }
> + break;
> +
> + default:
> + DEBUG ((DEBUG_INFO, "Unknown error\n"));
> + break;
> + }
> +
> + return EFI_DEVICE_ERROR;
> +}
> +
> +/**
> + Create PRP lists for Data transfer which is larger than 2 memory pages.
> + Note here we calcuate the number of required PRP lists and allocate them at
> one time.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] SqId - The SQ index for this PRP
> + @param[in] PhysicalAddr - The physical base address of Data
> Buffer.
> + @param[in] Pages - The number of pages to be
> transfered.
> + @param[out] PrpListHost - The host base address of PRP lists.
> + @param[in,out] PrpListNo - The number of PRP List.
> +
> + @retval The pointer Value to the first PRP List of the PRP lists.
> +
> +**/
> +STATIC
> +UINT64
> +NvmeCreatePrpList (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT16 SqId,
> + IN EFI_PHYSICAL_ADDRESS PhysicalAddr,
> + IN UINTN Pages,
> + OUT VOID **PrpListHost,
> + IN OUT UINTN *PrpListNo
> + )
> +{
> + UINTN PrpEntryNo;
> + UINT64 PrpListBase;
> + UINTN PrpListIndex;
> + UINTN PrpEntryIndex;
> + UINT64 Remainder;
> + EFI_PHYSICAL_ADDRESS PrpListPhyAddr;
> + UINTN Bytes;
> + UINT8 *PrpEntry;
> + EFI_PHYSICAL_ADDRESS NewPhyAddr;
> +
> + ///
> + /// The number of Prp Entry in a memory page.
> + ///
> + PrpEntryNo = EFI_PAGE_SIZE / sizeof (UINT64);
> +
> + ///
> + /// Calculate total PrpList number.
> + ///
> + *PrpListNo = (UINTN) DivU64x64Remainder ((UINT64)Pages,
> (UINT64)PrpEntryNo, &Remainder);
> + if (Remainder != 0) {
> + *PrpListNo += 1;
> + }
> +
> + if (*PrpListNo > NVME_PRP_SIZE) {
> + DEBUG ((DEBUG_INFO, "NvmeCreatePrpList (PhysicalAddr: %lx, Pages: %x)
> PrpEntryNo: %x\n",
> + PhysicalAddr, Pages, PrpEntryNo));
> + DEBUG ((DEBUG_INFO, "*PrpListNo: %x, Remainder: %lx", *PrpListNo,
> Remainder));
> + ASSERT (FALSE);
> + }
> + *PrpListHost = (VOID *)(UINTN) NVME_PRP_BASE (Nvme, SqId);
> +
> + Bytes = EFI_PAGES_TO_SIZE (*PrpListNo);
> + PrpListPhyAddr = (UINT64)(UINTN)(*PrpListHost);
> +
> + ///
> + /// Fill all PRP lists except of last one.
> + ///
> + ZeroMem (*PrpListHost, Bytes);
> + for (PrpListIndex = 0; PrpListIndex < *PrpListNo - 1; ++PrpListIndex) {
> + PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
> +
> + for (PrpEntryIndex = 0; PrpEntryIndex < PrpEntryNo; ++PrpEntryIndex) {
> + PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex *
> sizeof(UINT64));
> + if (PrpEntryIndex != PrpEntryNo - 1) {
> + ///
> + /// Fill all PRP entries except of last one.
> + ///
> + CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof
> (UINT64));
> + PhysicalAddr += EFI_PAGE_SIZE;
> + } else {
> + ///
> + /// Fill last PRP entries with next PRP List pointer.
> + ///
> + NewPhyAddr = (PrpListPhyAddr + (PrpListIndex + 1) *
> EFI_PAGE_SIZE);
> + CopyMem (PrpEntry, (VOID *)(UINTN) (&NewPhyAddr), sizeof
> (UINT64));
> + }
> + }
> + }
> +
> + ///
> + /// Fill last PRP list.
> + ///
> + PrpListBase = *(UINT64*)PrpListHost + PrpListIndex * EFI_PAGE_SIZE;
> + for (PrpEntryIndex = 0; PrpEntryIndex < ((Remainder != 0) ? Remainder :
> PrpEntryNo); ++PrpEntryIndex) {
> + PrpEntry = (UINT8 *)(UINTN) (PrpListBase + PrpEntryIndex *
> sizeof(UINT64));
> + CopyMem (PrpEntry, (VOID *)(UINTN) (&PhysicalAddr), sizeof (UINT64));
> +
> + PhysicalAddr += EFI_PAGE_SIZE;
> + }
> +
> + return PrpListPhyAddr;
> +}
> +
> +/**
> + Check whether there are available command slots.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - Available command slot is found
> + @retval EFI_NOT_READY - No available command slot is found
> + @retval EFI_DEVICE_ERROR - Error occurred on device side.
> +
> +**/
> +EFI_STATUS
> +NvmeHasFreeCmdSlot (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + )
> +{
> + return TRUE;
> +}
> +
> +/**
> + Check whether all command slots are clean.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - All command slots are clean
> + @retval EFI_NOT_READY - Not all command slots are clean
> + @retval EFI_DEVICE_ERROR - Error occurred on device side.
> +
> +**/
> +EFI_STATUS
> +NvmeIsAllCmdSlotClean (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + )
> +{
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Waits until all NVME commands completed.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - All NVME commands have
> completed
> + @retval EFI_TIMEOUT - Timeout occured
> + @retval EFI_NOT_READY - Not all NVME commands have
> completed
> + @retval others - Error occurred on device side.
> +**/
> +EFI_STATUS
> +NvmeWaitAllComplete (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + )
> +{
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Sends an NVM Express Command Packet to an NVM Express controller or
> namespace. This function supports
> + both blocking I/O and nonblocking I/O. The blocking I/O functionality is
> required, and the nonblocking
> + I/O functionality is optional.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] NamespaceId - Is a 32 bit Namespace ID to which
> the Express HCI command packet will be sent.
> + A Value of 0 denotes the NVM
> Express controller, a Value of all 0FFh in the namespace
> + ID specifies that the command
> packet should be sent to all valid namespaces.
> + @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to
> which the Express HCI command packet will be sent.
> + A Value of 0 denotes the NVM
> Express controller, a Value of all 0FFh in the namespace
> + UUID specifies that the command
> packet should be sent to all valid namespaces.
> + @param[in,out] Packet - A pointer to the NVM Express HCI
> Command Packet to send to the NVMe namespace specified
> + by NamespaceId.
> +
> + @retval EFI_SUCCESS - The NVM Express Command Packet
> was sent by the host. TransferLength bytes were transferred
> + to, or from DataBuffer.
> + @retval EFI_NOT_READY - The NVM Express Command Packet
> could not be sent because the controller is not ready. The caller
> + may retry again later.
> + @retval EFI_DEVICE_ERROR - A device error occurred while
> attempting to send the NVM Express Command Packet.
> + @retval EFI_INVALID_PARAMETER - Namespace, or the contents of
> NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
> + Express Command Packet was not
> sent, so no additional status information is available.
> + @retval EFI_UNSUPPORTED - The command described by the
> NVM Express Command Packet is not supported by the host adapter.
> + The NVM Express Command
> Packet was not sent, so no additional status information is available.
> + @retval EFI_TIMEOUT - A timeout occurred while waiting
> for the NVM Express Command Packet to execute.
> +
> +**/
> +EFI_STATUS
> +NvmePassThru (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT32 NamespaceId,
> + IN UINT64 NamespaceUuid,
> + IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
> + )
> +{
> + EFI_STATUS Status;
> + NVME_SQ *Sq;
> + NVME_CQ *Cq;
> + UINT8 Qid;
> + UINT32 Bytes;
> + UINT32 Offset;
> + EFI_PHYSICAL_ADDRESS PhyAddr;
> + VOID *PrpListHost;
> + UINTN PrpListNo;
> + UINT32 Timer;
> + UINTN SqSize;
> + UINTN CqSize;
> +
> + ///
> + /// check the Data fields in Packet parameter.
> + ///
> + if ((Nvme == NULL) || (Packet == NULL)) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter:
> Nvme(%x)/Packet(%x)\n",
> + (UINTN)Nvme, (UINTN)Packet));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if ((Packet->NvmeCmd == NULL) || (Packet->NvmeResponse == NULL)) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter:
> NvmeCmd(%x)/NvmeResponse(%x)\n",
> + (UINTN)Packet->NvmeCmd, (UINTN)Packet->NvmeResponse));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + if (Packet->QueueId != NVME_ADMIN_QUEUE && Packet->QueueId !=
> NVME_IO_QUEUE) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru, invalid parameter:
> QueueId(%x)\n",
> + Packet->QueueId));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + PrpListHost = NULL;
> + PrpListNo = 0;
> + Status = EFI_SUCCESS;
> +
> + Qid = Packet->QueueId;
> + Sq = Nvme->SqBuffer[Qid] + Nvme->SqTdbl[Qid].Sqt;
> + Cq = Nvme->CqBuffer[Qid] + Nvme->CqHdbl[Qid].Cqh;
> + if (Qid == NVME_ADMIN_QUEUE) {
> + SqSize = NVME_ASQ_SIZE + 1;
> + CqSize = NVME_ACQ_SIZE + 1;
> + } else {
> + SqSize = NVME_CSQ_DEPTH;
> + CqSize = NVME_CCQ_DEPTH;
> + }
> +
> + if (Packet->NvmeCmd->Nsid != NamespaceId) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru: Nsid mismatch (%x, %x)\n",
> + Packet->NvmeCmd->Nsid, NamespaceId));
> + return EFI_INVALID_PARAMETER;
> + }
> +
> + ZeroMem (Sq, sizeof (NVME_SQ));
> + Sq->Opc = Packet->NvmeCmd->Cdw0.Opcode;
> + Sq->Fuse = Packet->NvmeCmd->Cdw0.FusedOperation;
> + Sq->Cid = Packet->NvmeCmd->Cdw0.Cid;
> + Sq->Nsid = Packet->NvmeCmd->Nsid;
> +
> + ///
> + /// Currently we only support PRP for Data transfer, SGL is NOT supported.
> + ///
> + ASSERT (Sq->Psdt == 0);
> + if (Sq->Psdt != 0) {
> + DEBUG ((DEBUG_ERROR, "NvmePassThru: doesn't support SGL
> mechanism\n"));
> + return EFI_UNSUPPORTED;
> + }
> +
> + Sq->Prp[0] = Packet->TransferBuffer;
> + Sq->Prp[1] = 0;
> +
> + if(Packet->MetadataBuffer != (UINT64)(UINTN)NULL) {
> + Sq->Mptr = Packet->MetadataBuffer;
> + }
> +
> + ///
> + /// If the Buffer Size spans more than two memory pages (page Size as
> defined in CC.Mps),
> + /// then build a PRP list in the second PRP submission queue entry.
> + ///
> + Offset = ((UINT32)Sq->Prp[0]) & (EFI_PAGE_SIZE - 1);
> + Bytes = Packet->TransferLength;
> +
> + if ((Offset + Bytes) > (EFI_PAGE_SIZE * 2)) {
> + ///
> + /// Create PrpList for remaining Data Buffer.
> + ///
> + PhyAddr = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
> + Sq->Prp[1] = NvmeCreatePrpList (Nvme, Nvme->SqTdbl[Qid].Sqt, PhyAddr,
> EFI_SIZE_TO_PAGES(Offset + Bytes) - 1, &PrpListHost, &PrpListNo);
> + if (Sq->Prp[1] == 0) {
> + Status = EFI_OUT_OF_RESOURCES;
> + DEBUG ((DEBUG_ERROR, "NvmeCreatePrpList fail, Status: %r\n",
> Status));
> + goto EXIT;
> + }
> +
> + } else if ((Offset + Bytes) > EFI_PAGE_SIZE) {
> + Sq->Prp[1] = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
> + }
> +
> + if(Packet->NvmeCmd->Flags & CDW10_VALID) {
> + Sq->Payload.Raw.Cdw10 = Packet->NvmeCmd->Cdw10;
> + }
> + if(Packet->NvmeCmd->Flags & CDW11_VALID) {
> + Sq->Payload.Raw.Cdw11 = Packet->NvmeCmd->Cdw11;
> + }
> + if(Packet->NvmeCmd->Flags & CDW12_VALID) {
> + Sq->Payload.Raw.Cdw12 = Packet->NvmeCmd->Cdw12;
> + }
> + if(Packet->NvmeCmd->Flags & CDW13_VALID) {
> + Sq->Payload.Raw.Cdw13 = Packet->NvmeCmd->Cdw13;
> + }
> + if(Packet->NvmeCmd->Flags & CDW14_VALID) {
> + Sq->Payload.Raw.Cdw14 = Packet->NvmeCmd->Cdw14;
> + }
> + if(Packet->NvmeCmd->Flags & CDW15_VALID) {
> + Sq->Payload.Raw.Cdw15 = Packet->NvmeCmd->Cdw15;
> + }
> +
> + ///
> + /// Ring the submission queue doorbell.
> + ///
> + Nvme->SqTdbl[Qid].Sqt++;
> + if(Nvme->SqTdbl[Qid].Sqt == SqSize) {
> + Nvme->SqTdbl[Qid].Sqt = 0;
> + }
> + Status = NVME_SET_SQTDBL (Nvme, Qid, &Nvme->SqTdbl[Qid]);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_SET_SQTDBL fail, Status: %r\n",
> Status));
> + goto EXIT;
> + }
> +
> + ///
> + /// Wait for completion queue to get filled in.
> + ///
> + Status = EFI_TIMEOUT;
> + Timer = 0;
> + while (Timer < NVME_CMD_TIMEOUT) {
> + //DEBUG ((DEBUG_VERBOSE, "Timer: %x, Cq:\n", Timer));
> + //DumpMem (Cq, sizeof (NVME_CQ));
> + if (Cq->Pt != Nvme->Pt[Qid]) {
> + Status = EFI_SUCCESS;
> + break;
> + }
> +
> + MicroSecondDelay (NVME_CMD_WAIT);
> + Timer += NVME_CMD_WAIT;
> + }
> +
> + Nvme->CqHdbl[Qid].Cqh++;
> + if (Nvme->CqHdbl[Qid].Cqh == CqSize) {
> + Nvme->CqHdbl[Qid].Cqh = 0;
> + Nvme->Pt[Qid] ^= 1;
> + }
> +
> + ///
> + /// Copy the Respose Queue entry for this command to the callers response
> Buffer
> + ///
> + CopyMem (Packet->NvmeResponse, Cq, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + if (!EFI_ERROR(Status)) { // We still need to check CQ status if no timeout
> error occured
> + Status = NvmeCheckCqStatus (Cq);
> + }
> + NVME_SET_CQHDBL (Nvme, Qid, &Nvme->CqHdbl[Qid]);
> +
> +EXIT:
> + return Status;
> +}
> +
> +/**
> + Get identify controller Data.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer used to store the identify
> controller Data.
> +
> + @return EFI_SUCCESS - Successfully get the identify
> controller Data.
> + @return others - Fail to get the identify controller
> Data.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeIdentifyController (
> + IN NVME_CONTEXT *Nvme,
> + IN VOID *Buffer
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + //
> + // According to Nvm Express 1.1 spec Figure 38, When not used, the field
> shall be cleared to 0h.
> + // For the Identify command, the Namespace Identifier is only used for the
> Namespace Data structure.
> + //
> + Command.Nsid = 0;
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> + CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
> + CommandPacket.TransferLength = sizeof
> (NVME_ADMIN_CONTROLLER_DATA);
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> + //
> + // Set bit 0 (Cns bit) to 1 to identify a controller
> + //
> + Command.Cdw10 = 1;
> + Command.Flags = CDW10_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Get specified identify namespace Data.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] NamespaceId - The specified namespace identifier.
> + @param[in] Buffer - The Buffer used to store the identify
> namespace Data.
> +
> + @return EFI_SUCCESS - Successfully get the identify
> namespace Data.
> + @return others - Fail to get the identify namespace
> Data.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeIdentifyNamespace (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT32 NamespaceId,
> + IN VOID *Buffer
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_IDENTIFY_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + Command.Nsid = NamespaceId;
> + CommandPacket.TransferBuffer = (UINT64)(UINTN)Buffer;
> + CommandPacket.TransferLength = sizeof
> (NVME_ADMIN_NAMESPACE_DATA);
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> + //
> + // Set bit 0 (Cns bit) to 1 to identify a namespace
> + //
> + CommandPacket.NvmeCmd->Cdw10 = 0;
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NamespaceId,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Get Block Size for specific namespace of NVME.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return - Block Size in bytes
> +
> +**/
> +STATIC
> +UINT32
> +NvmeGetBlockSize (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + UINT32 BlockSize;
> + UINT32 Lbads;
> + UINT32 Flbas;
> + UINT32 LbaFmtIdx;
> +
> + Flbas = Nvme->NamespaceData->Flbas;
> + LbaFmtIdx = Flbas & 3;
> + Lbads = Nvme->NamespaceData->LbaFormat[LbaFmtIdx].Lbads;
> +
> + BlockSize = (UINT32)1 << Lbads;
> + return BlockSize;
> +}
> +
> +/**
> + Get last LBA for specific namespace of NVME.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return - Last LBA address
> +
> +**/
> +STATIC
> +EFI_LBA
> +NvmeGetLastLba (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + EFI_LBA LastBlock;
> + LastBlock = Nvme->NamespaceData->Nsze - 1;
> + return LastBlock;
> +}
> +
> +/**
> + Create io completion queue.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully create io completion
> queue.
> + @return others - Fail to create io completion queue.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeCreateIoCompletionQueue (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_CRIOCQ CrIoCq;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&CrIoCq, sizeof(NVME_ADMIN_CRIOCQ));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_CRIOCQ_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer =
> (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
> + CommandPacket.TransferLength = EFI_PAGE_SIZE;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + CrIoCq.Qid = NVME_IO_QUEUE;
> + CrIoCq.Qsize = NVME_CCQ_SIZE;
> + CrIoCq.Pc = 1;
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoCq, sizeof
> (NVME_ADMIN_CRIOCQ));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Create io submission queue.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully create io submission
> queue.
> + @return others - Fail to create io submission queue.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeCreateIoSubmissionQueue (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_CRIOSQ CrIoSq;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&CrIoSq, sizeof(NVME_ADMIN_CRIOSQ));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_CRIOSQ_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer =
> (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
> + CommandPacket.TransferLength = EFI_PAGE_SIZE;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + CrIoSq.Qid = NVME_IO_QUEUE;
> + CrIoSq.Qsize = NVME_CSQ_SIZE;
> + CrIoSq.Pc = 1;
> + CrIoSq.Cqid = NVME_IO_QUEUE;
> + CrIoSq.Qprio = 0;
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &CrIoSq, sizeof
> (NVME_ADMIN_CRIOSQ));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Security send and receive commands.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] SendCommand - The flag to indicate the
> command type, TRUE for Send command and FALSE for receive command
> + @param[in] SecurityProtocol - Security Protocol
> + @param[in] SpSpecific - Security Protocol Specific
> + @param[in] TransferLength - Transfer Length of Buffer (in
> bytes) - always a multiple of 512
> + @param[in,out] TransferBuffer - Address of Data to transfer
> +
> + @return EFI_SUCCESS - Successfully create io submission
> queue.
> + @return others - Fail to send/receive commands.
> +
> +**/
> +EFI_STATUS
> +NvmeSecuritySendReceive (
> + IN NVME_CONTEXT *Nvme,
> + IN BOOLEAN SendCommand,
> + IN UINT8 SecurityProtocol,
> + IN UINT16 SpSpecific,
> + IN UINTN TransferLength,
> + IN OUT VOID *TransferBuffer
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_SECSEND SecSend;
> + OACS *Oacs;
> + UINT8 Opcode;
> + VOID* *SecBuff;
> +
> + Oacs = (OACS *)&Nvme->ControllerData->Oacs;
> +
> + //
> + // Verify security bit for Security Send/Receive commands
> + //
> + if (Oacs->Security == 0) {
> + DEBUG ((DEBUG_ERROR, "Security command doesn't support.\n"));
> + return EFI_NOT_READY;
> + }
> +
> + SecBuff = (VOID *)(UINTN) NVME_SEC_BASE (Nvme);
> +
> + //
> + // Actions for sending security command
> + //
> + if (SendCommand) {
> + CopyMem (SecBuff, TransferBuffer, TransferLength);
> + }
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&SecSend, sizeof(NVME_ADMIN_SECSEND));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Opcode = (UINT8)(SendCommand ? NVME_ADMIN_SECURITY_SEND_OPC :
> NVME_ADMIN_SECURITY_RECV_OPC);
> + Command.Cdw0.Opcode = Opcode;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer = (UINT64)(UINTN)SecBuff;
> + CommandPacket.TransferLength = (UINT32)TransferLength;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + SecSend.Spsp = SpSpecific;
> + SecSend.Secp = SecurityProtocol;
> + SecSend.Tl = (UINT32)TransferLength;
> +
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &SecSend, sizeof
> (NVME_ADMIN_SECSEND));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + //
> + // Actions for receiving security command
> + //
> + if (!SendCommand) {
> + CopyMem (TransferBuffer, SecBuff, TransferLength);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Destroy io completion queue.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully destroy io completion
> queue.
> + @return others - Fail to destroy io completion queue.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeDestroyIoCompletionQueue (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_DEIOCQ DelIoCq;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&DelIoCq, sizeof(NVME_ADMIN_DEIOCQ));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_DELIOCQ_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer =
> (UINT64)(UINTN)Nvme->CqBuffer[NVME_IO_QUEUE];
> + CommandPacket.TransferLength = EFI_PAGE_SIZE;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + DelIoCq.Qid = NVME_IO_QUEUE;
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoCq, sizeof
> (NVME_ADMIN_DEIOCQ));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Destroy io submission queue.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @return EFI_SUCCESS - Successfully destroy io submission
> queue.
> + @return others - Fail to destroy io submission queue.
> +
> +**/
> +STATIC
> +EFI_STATUS
> +NvmeDestroyIoSubmissionQueue (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + NVME_ADMIN_DEIOSQ DelIoSq;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> + ZeroMem (&DelIoSq, sizeof(NVME_ADMIN_DEIOSQ));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + Command.Cdw0.Opcode = NVME_ADMIN_DELIOSQ_OPC;
> + Command.Cdw0.Cid = Nvme->Cid[NVME_ADMIN_QUEUE]++;
> + CommandPacket.TransferBuffer =
> (UINT64)(UINTN)Nvme->SqBuffer[NVME_IO_QUEUE];
> + CommandPacket.TransferLength = EFI_PAGE_SIZE;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_ADMIN_QUEUE;
> +
> + DelIoSq.Qid = NVME_IO_QUEUE;
> + CopyMem (&CommandPacket.NvmeCmd->Cdw10, &DelIoSq, sizeof
> (NVME_ADMIN_DEIOSQ));
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + NVME_CONTROLLER_ID,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Allocate transfer-related Data struct which is used at Nvme.
> +
> + @param[in, out] Nvme The pointer to the NVME_CONTEXT Data
> structure.
> +
> + @retval EFI_OUT_OF_RESOURCE No enough resource.
> + @retval EFI_SUCCESS Successful to allocate resource.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NvmeAllocateResource (
> + IN OUT NVME_CONTEXT *Nvme
> + )
> +{
> + EFI_STATUS Status;
> + EFI_PHYSICAL_ADDRESS DeviceAddress;
> + VOID *Base;
> + VOID *Mapping;
> +
> + //
> + // Allocate resources for DMA.
> + //
> + Status = IoMmuAllocateBuffer (
> + EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE),
> + &Base,
> + &DeviceAddress,
> + &Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + ASSERT (DeviceAddress == ((EFI_PHYSICAL_ADDRESS) (UINTN) Base));
> + Nvme->BaseMemMapping = Mapping;
> + Nvme->BaseMem = Base;
> + ZeroMem (Nvme->BaseMem, EFI_PAGE_SIZE * EFI_SIZE_TO_PAGES
> (NVME_MEM_MAX_SIZE));
> +
> + DEBUG ((
> + DEBUG_INFO,
> + "%a() NvmeContext 0x%x\n",
> + __FUNCTION__,
> + Nvme->BaseMem
> + ));
> +
> + return EFI_SUCCESS;
> +}
> +
> +/**
> + Free allocated transfer-related Data struct which is used at NVMe.
> +
> + @param[in, out] Nvme The pointer to the NVME_CONTEXT Data
> structure.
> +
> +**/
> +VOID
> +EFIAPI
> +NvmeFreeResource (
> + IN OUT NVME_CONTEXT *Nvme
> + )
> +{
> + if (Nvme->BaseMem != NULL) {
> + IoMmuFreeBuffer (
> + EFI_SIZE_TO_PAGES (NVME_MEM_MAX_SIZE),
> + Nvme->BaseMem,
> + Nvme->BaseMemMapping
> + );
> + Nvme->BaseMem = NULL;
> + }
> +}
> +
> +/**
> + Initialize the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - The NVM Express Controller is
> initialized successfully.
> + @retval Others - A device error occurred while
> initializing the controller.
> +
> +**/
> +EFI_STATUS
> +NvmeControllerInit (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + EFI_STATUS Status;
> + NVME_AQA Aqa;
> + NVME_ASQ Asq;
> + NVME_ACQ Acq;
> + NVME_VER Ver;
> +
> + UINT32 MlBAR;
> + UINT32 MuBAR;
> +
> + ///
> + /// Update PCIE BAR0/1 for NVME device
> + ///
> + MlBAR = Nvme->Nbar;
> + MuBAR = 0;
> + PciWrite32 (Nvme->PciBase + 0x10, MlBAR); // MLBAR (BAR0)
> + PciWrite32 (Nvme->PciBase + 0x14, MuBAR); // MUBAR (BAR1)
> +
> + ///
> + /// Enable PCIE decode
> + ///
> + PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x6);
> +
> + // Version
> + NVME_GET_VER (Nvme, &Ver);
> + if (!(Ver.Mjr == 0x0001) && (Ver.Mnr == 0x0000)) {
> + DEBUG ((DEBUG_INFO, "\n!!!\n!!! NVME Version mismatch for the
> implementation !!!\n!!!\n"));
> + }
> +
> + ///
> + /// Read the Controller Capabilities register and verify that the NVM
> command set is supported
> + ///
> + Status = NVME_GET_CAP (Nvme, &Nvme->Cap);
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "NVME_GET_CAP fail, Status: %r\n", Status));
> + goto Done;
> + }
> +
> + if (Nvme->Cap.Css != 0x01) {
> + DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: the controller doesn't
> support NVMe command set\n"));
> + Status = EFI_UNSUPPORTED;
> + goto Done;
> + }
> +
> + ///
> + /// Currently the driver only supports 4k page Size.
> + ///
> + if ((Nvme->Cap.Mpsmin + 12) > EFI_PAGE_SHIFT) {
> + DEBUG ((DEBUG_ERROR, "NvmeControllerInit fail: only supports 4k page
> Size\n"));
> + ASSERT (FALSE);
> + Status = EFI_UNSUPPORTED;
> + goto Done;
> + }
> +
> + Nvme->Cid[0] = 0;
> + Nvme->Cid[1] = 0;
> +
> + Nvme->Pt[0] = 0;
> + Nvme->Pt[1] = 0;
> +
> + ZeroMem ((VOID *)(UINTN)(&(Nvme->SqTdbl[0])), sizeof (NVME_SQTDBL) *
> NVME_MAX_IO_QUEUES);
> + ZeroMem ((VOID *)(UINTN)(&(Nvme->CqHdbl[0])), sizeof (NVME_CQHDBL)
> * NVME_MAX_IO_QUEUES);
> +
> + ZeroMem (Nvme->BaseMem, NVME_MEM_MAX_SIZE);
> +
> + Status = NvmeDisableController (Nvme);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeDisableController fail, Status: %r\n",
> Status));
> + goto Done;
> + }
> +
> + ///
> + /// set number of entries admin submission & completion queues.
> + ///
> + Aqa.Asqs = NVME_ASQ_SIZE;
> + Aqa.Rsvd1 = 0;
> + Aqa.Acqs = NVME_ACQ_SIZE;
> + Aqa.Rsvd2 = 0;
> +
> + ///
> + /// Address of admin submission queue.
> + ///
> + Asq = (UINT64)(UINTN)(NVME_ASQ_BASE (Nvme) & ~0xFFF);
> +
> + ///
> + /// Address of admin completion queue.
> + ///
> + Acq = (UINT64)(UINTN)(NVME_ACQ_BASE (Nvme) & ~0xFFF);
> +
> + ///
> + /// Address of I/O submission & completion queue.
> + ///
> + Nvme->SqBuffer[0] = (NVME_SQ *)(UINTN)NVME_ASQ_BASE (Nvme); //
> NVME_ADMIN_QUEUE
> + Nvme->CqBuffer[0] = (NVME_CQ *)(UINTN)NVME_ACQ_BASE (Nvme); //
> NVME_ADMIN_QUEUE
> + Nvme->SqBuffer[1] = (NVME_SQ *)(UINTN)NVME_SQ_BASE (Nvme, 0); //
> NVME_IO_QUEUE
> + Nvme->CqBuffer[1] = (NVME_CQ *)(UINTN)NVME_CQ_BASE (Nvme, 0); //
> NVME_IO_QUEUE
> +
> + DEBUG ((DEBUG_INFO, "Admin Submission Queue Size (Aqa.Asqs) =
> [%08X]\n", Aqa.Asqs));
> + DEBUG ((DEBUG_INFO, "Admin Completion Queue Size (Aqa.Acqs) =
> [%08X]\n", Aqa.Acqs));
> + DEBUG ((DEBUG_INFO, "Admin Submission Queue (SqBuffer[0]) =
> [%08X]\n", Nvme->SqBuffer[0]));
> + DEBUG ((DEBUG_INFO, "Admin Completion Queue (CqBuffer[0]) =
> [%08X]\n", Nvme->CqBuffer[0]));
> + DEBUG ((DEBUG_INFO, "I/O Submission Queue (SqBuffer[1]) =
> [%08X]\n", Nvme->SqBuffer[1]));
> + DEBUG ((DEBUG_INFO, "I/O Completion Queue (CqBuffer[1]) =
> [%08X]\n", Nvme->CqBuffer[1]));
> +
> + ///
> + /// Program admin queue attributes.
> + ///
> + Status = NVME_SET_AQA (Nvme, &Aqa);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Program admin submission queue address.
> + ///
> + Status = NVME_SET_ASQ (Nvme, &Asq);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Program admin completion queue address.
> + ///
> + Status = NVME_SET_ACQ (Nvme, &Acq);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + Status = NvmeEnableController (Nvme);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Create one I/O completion queue.
> + ///
> + Status = NvmeCreateIoCompletionQueue (Nvme);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Create one I/O Submission queue.
> + ///
> + Status = NvmeCreateIoSubmissionQueue (Nvme);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Get current Identify Controller Data
> + ///
> + Nvme->ControllerData = (NVME_ADMIN_CONTROLLER_DATA *)(UINTN)
> NVME_CONTROL_DATA_BASE (Nvme);
> + Status = NvmeIdentifyController (Nvme, Nvme->ControllerData);
> + if (EFI_ERROR(Status)) {
> + goto Done;
> + }
> +
> + ///
> + /// Dump NvmExpress Identify Controller Data
> + ///
> + Nvme->ControllerData->Sn[19] = 0;
> + Nvme->ControllerData->Mn[39] = 0;
> + //NvmeDumpIdentifyController (Nvme->ControllerData);
> +
> + ///
> + /// Get current Identify Namespace Data
> + ///
> + Nvme->NamespaceData = (NVME_ADMIN_NAMESPACE_DATA
> *)NVME_NAMESPACE_DATA_BASE (Nvme);
> + Status = NvmeIdentifyNamespace (Nvme, Nvme->Nsid,
> Nvme->NamespaceData);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeIdentifyNamespace fail, Status = %r\n",
> Status));
> + goto Done;
> + }
> +
> + ///
> + /// Dump NvmExpress Identify Namespace Data
> + ///
> + if (Nvme->NamespaceData->Ncap == 0) {
> + DEBUG ((DEBUG_ERROR, "Invalid Namespace, Ncap: %lx\n",
> Nvme->NamespaceData->Ncap));
> + Status = EFI_DEVICE_ERROR;
> + goto Done;
> + }
> +
> + Nvme->BlockSize = NvmeGetBlockSize (Nvme);
> + Nvme->LastBlock = NvmeGetLastLba (Nvme);
> +
> + Nvme->State = NvmeStatusInit;
> +
> + return EFI_SUCCESS;
> +
> +Done:
> + return Status;
> +}
> +
> +/**
> + Un-initialize the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - The NVM Express Controller is
> un-initialized successfully.
> + @retval Others - A device error occurred while
> un-initializing the controller.
> +
> +**/
> +EFI_STATUS
> +NvmeControllerExit (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + EFI_STATUS Status;
> +
> + Status = EFI_SUCCESS;
> + if (Nvme->State == NvmeStatusInit || Nvme->State == NvmeStatusMax) {
> + ///
> + /// Destroy I/O Submission queue.
> + ///
> + Status = NvmeDestroyIoSubmissionQueue (Nvme);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeDestroyIoSubmissionQueue fail, Status
> = %r\n", Status));
> + return Status;
> + }
> +
> + ///
> + /// Destroy I/O completion queue.
> + ///
> + Status = NvmeDestroyIoCompletionQueue (Nvme);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeDestroyIoCompletionQueue fail, Status
> = %r\n", Status));
> + return Status;
> + }
> +
> + Status = NvmeShutdownController (Nvme);
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeShutdownController fail, Status: %r\n",
> Status));
> + }
> + }
> +
> + ///
> + /// Disable PCIE decode
> + ///
> + PciWrite8 (Nvme->PciBase + NVME_PCIE_PCICMD, 0x0);
> + PciWrite32 (Nvme->PciBase + 0x10, 0); // MLBAR (BAR0)
> + PciWrite32 (Nvme->PciBase + 0x14, 0); // MUBAR (BAR1)
> +
> + Nvme->State = NvmeStatusUnknown;
> + return Status;
> +}
> +
> +/**
> + Read sector Data from the NVMe device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in,out] Buffer - The Buffer used to store the Data
> read from the device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be read.
> +
> + @retval EFI_SUCCESS - Datum are read from the device.
> + @retval Others - Fail to read all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeReadSectors (
> + IN NVME_CONTEXT *Nvme,
> + IN OUT UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINT32 Blocks
> + )
> +{
> + UINT32 Bytes;
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + UINT32 BlockSize;
> +
> + BlockSize = Nvme->BlockSize;
> + Bytes = Blocks * BlockSize;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_READ_OPC;
> + CommandPacket.NvmeCmd->Cdw0.Cid =
> Nvme->Cid[NVME_IO_QUEUE]++;
> + CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
> + CommandPacket.TransferBuffer = Buffer;
> +
> + CommandPacket.TransferLength = Bytes;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_IO_QUEUE;
> +
> + CommandPacket.NvmeCmd->Cdw10 = (UINT32)Lba;
> + CommandPacket.NvmeCmd->Cdw11 = (UINT32)(RShiftU64 (Lba, 32));
> + CommandPacket.NvmeCmd->Cdw12 = (Blocks - 1) & 0xFFFF;
> +
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID |
> CDW12_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + Nvme->Nsid,
> + 0,
> + &CommandPacket
> + );
> +
> + return Status;
> +}
> +
> +/**
> + Write sector Data to the NVMe device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer to be written into the
> device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be written.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeWriteSectors (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINT32 Blocks
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> + UINT32 Bytes;
> + UINT32 BlockSize;
> +
> + BlockSize = Nvme->BlockSize;
> + Bytes = Blocks * BlockSize;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_WRITE_OPC;
> + CommandPacket.NvmeCmd->Cdw0.Cid =
> Nvme->Cid[NVME_IO_QUEUE]++;
> + CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
> + CommandPacket.TransferBuffer = Buffer;
> +
> + CommandPacket.TransferLength = Bytes;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_IO_QUEUE;
> +
> + CommandPacket.NvmeCmd->Cdw10 = (UINT32)Lba;
> + CommandPacket.NvmeCmd->Cdw11 = (UINT32)(RShiftU64 (Lba, 32));
> + CommandPacket.NvmeCmd->Cdw12 = (Blocks - 1) & 0xFFFF;
> +
> + CommandPacket.MetadataBuffer = (UINT64)(UINTN)NULL;
> + CommandPacket.MetadataLength = 0;
> +
> + CommandPacket.NvmeCmd->Flags = CDW10_VALID | CDW11_VALID |
> CDW12_VALID;
> +
> + Status = NvmePassThru (
> + Nvme,
> + Nvme->Nsid,
> + 0,
> + &CommandPacket
> + );
> +
> + return Status;
> +}
> +
> +/**
> + Flushes all modified Data to the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeFlush (
> + IN NVME_CONTEXT *Nvme
> + )
> +{
> + NVM_EXPRESS_PASS_THRU_COMMAND_PACKET CommandPacket;
> + NVM_EXPRESS_COMMAND Command;
> + NVM_EXPRESS_RESPONSE Response;
> + EFI_STATUS Status;
> +
> + ZeroMem (&CommandPacket,
> sizeof(NVM_EXPRESS_PASS_THRU_COMMAND_PACKET));
> + ZeroMem (&Command, sizeof(NVM_EXPRESS_COMMAND));
> + ZeroMem (&Response, sizeof(NVM_EXPRESS_RESPONSE));
> +
> + CommandPacket.NvmeCmd = &Command;
> + CommandPacket.NvmeResponse = &Response;
> +
> + CommandPacket.NvmeCmd->Cdw0.Opcode = NVME_IO_FLUSH_OPC;
> + CommandPacket.NvmeCmd->Cdw0.Cid =
> Nvme->Cid[NVME_IO_QUEUE]++;
> + CommandPacket.NvmeCmd->Nsid = Nvme->Nsid;
> + CommandPacket.CommandTimeout = NVME_GENERIC_TIMEOUT;
> + CommandPacket.QueueId = NVME_IO_QUEUE;
> +
> + Status = NvmePassThru (
> + Nvme,
> + Nvme->Nsid,
> + 0,
> + &CommandPacket
> + );
> + if (!EFI_ERROR (Status)) {
> + Status = NvmeWaitAllComplete (Nvme, CommandPacket.QueueId);
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Read some blocks from the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[out] Buffer - The Buffer used to store the Data
> read from the device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be read.
> +
> + @retval EFI_SUCCESS - Datum are read from the device.
> + @retval Others - Fail to read all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeRead (
> + IN NVME_CONTEXT *Nvme,
> + OUT UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINTN Blocks
> + )
> +{
> + EFI_STATUS Status;
> + UINT32 BlockSize;
> + UINT32 MaxTransferBlocks;
> +
> + ASSERT (Blocks <= NVME_MAX_SECTORS);
> + Status = EFI_SUCCESS;
> + BlockSize = Nvme->BlockSize;
> + if (Nvme->ControllerData->Mdts != 0) {
> + MaxTransferBlocks = (1 << (Nvme->ControllerData->Mdts)) * (1 <<
> (Nvme->Cap.Mpsmin + 12)) / BlockSize;
> + } else {
> + MaxTransferBlocks = 1024;
> + }
> +
> + while (Blocks > 0) {
> + if (Blocks > MaxTransferBlocks) {
> + Status = NvmeReadSectors (Nvme, Buffer, Lba, MaxTransferBlocks);
> +
> + Blocks -= MaxTransferBlocks;
> + Buffer += (MaxTransferBlocks * BlockSize);
> + Lba += MaxTransferBlocks;
> + } else {
> + Status = NvmeReadSectors (Nvme, Buffer, Lba, (UINT32) Blocks);
> + Blocks = 0;
> + }
> +
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeRead fail, Status = %r\n", Status));
> + break;
> + }
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Write some blocks to the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer to be written into the
> device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be written.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeWrite (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINTN Blocks
> + )
> +{
> + EFI_STATUS Status;
> + UINT32 BlockSize;
> + UINT32 MaxTransferBlocks;
> +
> + ASSERT (Blocks <= NVME_MAX_SECTORS);
> + Status = EFI_SUCCESS;
> + BlockSize = Nvme->BlockSize;
> +
> + if (Nvme->ControllerData->Mdts != 0) {
> + MaxTransferBlocks = (1 << (Nvme->ControllerData->Mdts)) * (1 <<
> (Nvme->Cap.Mpsmin + 12)) / BlockSize;
> + } else {
> + MaxTransferBlocks = 1024;
> + }
> +
> + while (Blocks > 0) {
> + if (Blocks > MaxTransferBlocks) {
> + Status = NvmeWriteSectors (Nvme, Buffer, Lba, MaxTransferBlocks);
> +
> + Blocks -= MaxTransferBlocks;
> + Buffer += (MaxTransferBlocks * BlockSize);
> + Lba += MaxTransferBlocks;
> + } else {
> + Status = NvmeWriteSectors (Nvme, Buffer, Lba, (UINT32) Blocks);
> + Blocks = 0;
> + }
> +
> + if (EFI_ERROR(Status)) {
> + DEBUG ((DEBUG_ERROR, "NvmeWrite fail, Status = %r\n", Status));
> + break;
> + }
> + }
> +
> + return Status;
> +}
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
> new file mode 100644
> index 000000000000..3fef3dbc1c0d
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeMode.h
> @@ -0,0 +1,455 @@
> +/** @file
> + Header file for NVMe function definitions
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef __OPAL_PASSWORD_NVME_MODE_H__
> +#define __OPAL_PASSWORD_NVME_MODE_H__
> +
> +
> +#include "OpalNvmeReg.h"
> +
> +#define NVME_MAX_SECTORS 0x10000
> +//
> +// QueueId
> +//
> +#define NVME_ADMIN_QUEUE 0x00
> +#define NVME_IO_QUEUE 0x01
> +
> +typedef struct {
> + UINT8 Opcode;
> + UINT8 FusedOperation;
> + #define NORMAL_CMD 0x00
> + #define FUSED_FIRST_CMD 0x01
> + #define FUSED_SECOND_CMD 0x02
> + UINT16 Cid;
> +} NVME_CDW0;
> +
> +typedef struct {
> + NVME_CDW0 Cdw0;
> + UINT8 Flags;
> + #define CDW10_VALID 0x01
> + #define CDW11_VALID 0x02
> + #define CDW12_VALID 0x04
> + #define CDW13_VALID 0x08
> + #define CDW14_VALID 0x10
> + #define CDW15_VALID 0x20
> + UINT32 Nsid;
> + UINT32 Cdw10;
> + UINT32 Cdw11;
> + UINT32 Cdw12;
> + UINT32 Cdw13;
> + UINT32 Cdw14;
> + UINT32 Cdw15;
> +} NVM_EXPRESS_COMMAND;
> +
> +typedef struct {
> + UINT32 Cdw0;
> + UINT32 Cdw1;
> + UINT32 Cdw2;
> + UINT32 Cdw3;
> +} NVM_EXPRESS_RESPONSE;
> +
> +typedef struct {
> + UINT64 CommandTimeout;
> + UINT64 TransferBuffer;
> + UINT32 TransferLength;
> + UINT64 MetadataBuffer;
> + UINT32 MetadataLength;
> + UINT8 QueueId;
> + NVM_EXPRESS_COMMAND *NvmeCmd;
> + NVM_EXPRESS_RESPONSE *NvmeResponse;
> +} NVM_EXPRESS_PASS_THRU_COMMAND_PACKET;
> +
> +
> +#pragma pack(1)
> +
> +// Internal fields
> +typedef enum {
> + NvmeStatusUnknown,
> + NvmeStatusInit,
> + NvmeStatusInuse,
> + NvmeStatusMax,
> +} NVME_STATUS;
> +
> +typedef struct {
> + UINT32 Nbar;
> + VOID *BaseMem;
> + VOID *BaseMemMapping;
> + BOOLEAN PollCancellation;
> + UINT16 NvmeInitWaitTime;
> +
> + NVME_STATUS State;
> + UINT8 BusID;
> + UINT8 DeviceID;
> + UINT8 FuncID;
> + UINTN PciBase;
> +
> + UINT32 Nsid;
> + UINT64 Nsuuid;
> + UINT32 BlockSize;
> + EFI_LBA LastBlock;
> +
> + //
> + // Pointers to 4kB aligned submission & completion queues.
> + //
> + NVME_SQ
> *SqBuffer[NVME_MAX_IO_QUEUES];
> + NVME_CQ
> *CqBuffer[NVME_MAX_IO_QUEUES];
> + UINT16 Cid[NVME_MAX_IO_QUEUES];
> +
> + //
> + // Submission and completion queue indices.
> + //
> + NVME_SQTDBL
> SqTdbl[NVME_MAX_IO_QUEUES];
> + NVME_CQHDBL
> CqHdbl[NVME_MAX_IO_QUEUES];
> + UINT8 Pt[NVME_MAX_IO_QUEUES];
> +
> + UINTN
> SqeCount[NVME_MAX_IO_QUEUES];
> +
> + //
> + // Nvme controller capabilities
> + //
> + NVME_CAP Cap;
> +
> + //
> + // pointer to identify controller Data
> + //
> + NVME_ADMIN_CONTROLLER_DATA *ControllerData;
> + NVME_ADMIN_NAMESPACE_DATA *NamespaceData;
> +} NVME_CONTEXT;
> +
> +#pragma pack()
> +
> +/**
> + Transfer MMIO Data to memory.
> +
> + @param[in,out] MemBuffer - Destination: Memory address
> + @param[in] MmioAddr - Source: MMIO address
> + @param[in] Size - Size for read
> +
> + @retval EFI_SUCCESS - MMIO read sucessfully
> +**/
> +EFI_STATUS
> +NvmeMmioRead (
> + IN OUT VOID *MemBuffer,
> + IN UINTN MmioAddr,
> + IN UINTN Size
> + );
> +
> +/**
> + Transfer memory Data to MMIO.
> +
> + @param[in,out] MmioAddr - Destination: MMIO address
> + @param[in] MemBuffer - Source: Memory address
> + @param[in] Size - Size for write
> +
> + @retval EFI_SUCCESS - MMIO write sucessfully
> +**/
> +EFI_STATUS
> +NvmeMmioWrite (
> + IN OUT UINTN MmioAddr,
> + IN VOID *MemBuffer,
> + IN UINTN Size
> + );
> +
> +/**
> + Transfer memory data to MMIO.
> +
> + @param[in,out] MmioAddr - Destination: MMIO address
> + @param[in] MemBuffer - Source: Memory address
> + @param[in] Size - Size for write
> +
> + @retval EFI_SUCCESS - MMIO write sucessfully
> +**/
> +EFI_STATUS
> +OpalPciWrite (
> + IN OUT UINTN MmioAddr,
> + IN VOID *MemBuffer,
> + IN UINTN Size
> + );
> +
> +/**
> + Transfer MMIO data to memory.
> +
> + @param[in,out] MemBuffer - Destination: Memory address
> + @param[in] MmioAddr - Source: MMIO address
> + @param[in] Size - Size for read
> +
> + @retval EFI_SUCCESS - MMIO read sucessfully
> +**/
> +EFI_STATUS
> +OpalPciRead (
> + IN OUT VOID *MemBuffer,
> + IN UINTN MmioAddr,
> + IN UINTN Size
> + );
> +
> +/**
> + Allocate transfer-related Data struct which is used at Nvme.
> +
> + @param[in, out] Nvme The pointer to the NVME_CONTEXT Data
> structure.
> +
> + @retval EFI_OUT_OF_RESOURCE No enough resource.
> + @retval EFI_SUCCESS Successful to allocate resource.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +NvmeAllocateResource (
> + IN OUT NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Free allocated transfer-related Data struct which is used at NVMe.
> +
> + @param[in, out] Nvme The pointer to the NVME_CONTEXT Data
> structure.
> +
> +**/
> +VOID
> +EFIAPI
> +NvmeFreeResource (
> + IN OUT NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Sends an NVM Express Command Packet to an NVM Express controller or
> namespace. This function supports
> + both blocking I/O and nonblocking I/O. The blocking I/O functionality is
> required, and the nonblocking
> + I/O functionality is optional.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] NamespaceId - Is a 32 bit Namespace ID to which
> the Express HCI command packet will be sent.
> + A Value of 0 denotes the NVM
> Express controller, a Value of all 0FFh in the namespace
> + ID specifies that the command
> packet should be sent to all valid namespaces.
> + @param[in] NamespaceUuid - Is a 64 bit Namespace UUID to
> which the Express HCI command packet will be sent.
> + A Value of 0 denotes the NVM
> Express controller, a Value of all 0FFh in the namespace
> + UUID specifies that the command
> packet should be sent to all valid namespaces.
> + @param[in,out] Packet - A pointer to the NVM Express HCI
> Command Packet to send to the NVMe namespace specified
> + by NamespaceId.
> +
> + @retval EFI_SUCCESS - The NVM Express Command Packet
> was sent by the host. TransferLength bytes were transferred
> + to, or from DataBuffer.
> + @retval EFI_NOT_READY - The NVM Express Command Packet
> could not be sent because the controller is not ready. The caller
> + may retry again later.
> + @retval EFI_DEVICE_ERROR - A device error occurred while
> attempting to send the NVM Express Command Packet.
> + @retval EFI_INVALID_PARAMETER - Namespace, or the contents of
> NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
> + Express Command Packet was not
> sent, so no additional status information is available.
> + @retval EFI_UNSUPPORTED - The command described by the
> NVM Express Command Packet is not supported by the host adapter.
> + The NVM Express Command
> Packet was not sent, so no additional status information is available.
> + @retval EFI_TIMEOUT - A timeout occurred while waiting
> for the NVM Express Command Packet to execute.
> +
> +**/
> +EFI_STATUS
> +NvmePassThru (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT32 NamespaceId,
> + IN UINT64 NamespaceUuid,
> + IN OUT NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet
> + );
> +
> +/**
> + Waits until all NVME commands completed.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - All NVME commands have
> completed
> + @retval EFI_TIMEOUT - Timeout occured
> + @retval EFI_NOT_READY - Not all NVME commands have
> completed
> + @retval others - Error occurred on device side.
> +**/
> +EFI_STATUS
> +NvmeWaitAllComplete (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + );
> +
> +/**
> + Initialize the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - The NVM Express Controller is
> initialized successfully.
> + @retval Others - A device error occurred while
> initializing the controller.
> +
> +**/
> +EFI_STATUS
> +NvmeControllerInit (
> + IN NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Un-initialize the Nvm Express controller.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - The NVM Express Controller is
> un-initialized successfully.
> + @retval Others - A device error occurred while
> un-initializing the controller.
> +
> +**/
> +EFI_STATUS
> +NvmeControllerExit (
> + IN NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Check whether there are available command slots.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - Available command slot is found
> + @retval EFI_NOT_READY - No available command slot is found
> + @retval EFI_DEVICE_ERROR - Error occurred on device side.
> +
> +**/
> +EFI_STATUS
> +NvmeHasFreeCmdSlot (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + );
> +
> +/**
> + Check whether all command slots are clean.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Qid - Queue index
> +
> + @retval EFI_SUCCESS - All command slots are clean
> + @retval EFI_NOT_READY - Not all command slots are clean
> + @retval EFI_DEVICE_ERROR - Error occurred on device side.
> +
> +**/
> +EFI_STATUS
> +NvmeIsAllCmdSlotClean (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT8 Qid
> + );
> +
> +/**
> + Read sector Data from the NVMe device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in,out] Buffer - The Buffer used to store the Data
> read from the device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be read.
> +
> + @retval EFI_SUCCESS - Datum are read from the device.
> + @retval Others - Fail to read all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeReadSectors (
> + IN NVME_CONTEXT *Nvme,
> + IN OUT UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINT32 Blocks
> + );
> +
> +/**
> + Write sector Data to the NVMe device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer to be written into the
> device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be written.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeWriteSectors (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINT32 Blocks
> + );
> +
> +/**
> + Flushes all modified Data to the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeFlush (
> + IN NVME_CONTEXT *Nvme
> + );
> +
> +/**
> + Read some blocks from the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[out] Buffer - The Buffer used to store the Data
> read from the device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be read.
> +
> + @retval EFI_SUCCESS - Datum are read from the device.
> + @retval Others - Fail to read all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeRead (
> + IN NVME_CONTEXT *Nvme,
> + OUT UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINTN Blocks
> + );
> +
> +/**
> + Write some blocks to the device.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] Buffer - The Buffer to be written into the
> device.
> + @param[in] Lba - The start block number.
> + @param[in] Blocks - Total block number to be written.
> +
> + @retval EFI_SUCCESS - Datum are written into the Buffer.
> + @retval Others - Fail to write all the datum.
> +
> +**/
> +EFI_STATUS
> +NvmeWrite (
> + IN NVME_CONTEXT *Nvme,
> + IN UINT64 Buffer,
> + IN UINT64 Lba,
> + IN UINTN Blocks
> + );
> +
> +/**
> + Security send and receive commands.
> +
> + @param[in] Nvme - The pointer to the
> NVME_CONTEXT Data structure.
> + @param[in] SendCommand - The flag to indicate the
> command type, TRUE for Send command and FALSE for receive command
> + @param[in] SecurityProtocol - Security Protocol
> + @param[in] SpSpecific - Security Protocol Specific
> + @param[in] TransferLength - Transfer Length of Buffer (in
> bytes) - always a multiple of 512
> + @param[in,out] TransferBuffer - Address of Data to transfer
> +
> + @return EFI_SUCCESS - Successfully create io submission
> queue.
> + @return others - Fail to send/receive commands.
> +
> +**/
> +EFI_STATUS
> +NvmeSecuritySendReceive (
> + IN NVME_CONTEXT *Nvme,
> + IN BOOLEAN SendCommand,
> + IN UINT8 SecurityProtocol,
> + IN UINT16 SpSpecific,
> + IN UINTN TransferLength,
> + IN OUT VOID *TransferBuffer
> + );
> +
> +#endif
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
> new file mode 100644
> index 000000000000..03376b9e6c9a
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalNvmeReg.h
> @@ -0,0 +1,815 @@
> +/** @file
> + Header file for Registers and Structure definitions
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +#ifndef __OPAL_PASSWORD_NVME_REG_H__
> +#define __OPAL_PASSWORD_NVME_REG_H__
> +
> +//
> +// PCI Header for PCIe root port configuration
> +//
> +#define NVME_PCIE_PCICMD 0x04
> +#define NVME_PCIE_BNUM 0x18
> +#define NVME_PCIE_SEC_BNUM 0x19
> +#define NVME_PCIE_IOBL 0x1C
> +#define NVME_PCIE_MBL 0x20
> +#define NVME_PCIE_PMBL 0x24
> +#define NVME_PCIE_PMBU32 0x28
> +#define NVME_PCIE_PMLU32 0x2C
> +#define NVME_PCIE_INTR 0x3C
> +
> +//
> +// NVMe related definitions
> +//
> +#define PCI_CLASS_MASS_STORAGE_NVM 0x08 // mass
> storage sub-class non-volatile memory.
> +#define PCI_IF_NVMHCI 0x02 // mass
> storage programming interface NVMHCI.
> +
> +#define NVME_ASQ_SIZE 1 //
> Number of admin submission queue entries, which is 0-based
> +#define NVME_ACQ_SIZE 1 //
> Number of admin completion queue entries, which is 0-based
> +
> +#define NVME_CSQ_SIZE 63 //
> Number of I/O submission queue entries, which is 0-based
> +#define NVME_CCQ_SIZE 63 //
> Number of I/O completion queue entries, which is 0-based
> +
> +#define NVME_MAX_IO_QUEUES 2 //
> Number of I/O queues supported by the driver, 1 for AQ, 1 for CQ
> +
> +#define NVME_CSQ_DEPTH
> (NVME_CSQ_SIZE+1)
> +#define NVME_CCQ_DEPTH
> (NVME_CCQ_SIZE+1)
> +#define NVME_PRP_SIZE (4) //
> Pages of PRP list
> +
> +#define NVME_CONTROLLER_ID 0
> +
> +//
> +// Time out Value for Nvme transaction execution
> +//
> +#define NVME_GENERIC_TIMEOUT 5000000
> ///< us
> +#define NVME_CMD_WAIT 100
> ///< us
> +#define NVME_CMD_TIMEOUT
> 20000000 ///< us
> +
> +
> +
> +#define NVME_MEM_MAX_SIZE \
> + (( \
> + 1 /* Controller Data */ + \
> + 1 /* Identify Data */ + \
> + 1 /* ASQ */ +
> \
> + 1 /* ACQ */ +
> \
> + 1 /* SQs */ +
> \
> + 1 /* CQs */ +
> \
> + NVME_PRP_SIZE * NVME_CSQ_DEPTH /* PRPs */
> + \
> + 1 /* SECURITY */
> \
> + ) * EFI_PAGE_SIZE)
> +
> +
> +//
> +// controller register offsets
> +//
> +#define NVME_CAP_OFFSET 0x0000 // Controller Capabilities
> +#define NVME_VER_OFFSET 0x0008 // Version
> +#define NVME_INTMS_OFFSET 0x000c // Interrupt Mask Set
> +#define NVME_INTMC_OFFSET 0x0010 // Interrupt Mask Clear
> +#define NVME_CC_OFFSET 0x0014 // Controller Configuration
> +#define NVME_CSTS_OFFSET 0x001c // Controller Status
> +#define NVME_AQA_OFFSET 0x0024 // Admin Queue Attributes
> +#define NVME_ASQ_OFFSET 0x0028 // Admin Submission Queue
> Base Address
> +#define NVME_ACQ_OFFSET 0x0030 // Admin Completion Queue
> Base Address
> +#define NVME_SQ0_OFFSET 0x1000 // Submission Queue 0
> (admin) Tail Doorbell
> +#define NVME_CQ0_OFFSET 0x1004 // Completion Queue 0
> (admin) Head Doorbell
> +
> +//
> +// These register offsets are defined as 0x1000 + (N * (4 << CAP.DSTRD))
> +// Get the doorbell stride bit shift Value from the controller capabilities.
> +//
> +#define NVME_SQTDBL_OFFSET(QID, DSTRD) 0x1000 + ((2 * (QID)) * (4
> << (DSTRD))) // Submission Queue y (NVM) Tail Doorbell
> +#define NVME_CQHDBL_OFFSET(QID, DSTRD) 0x1000 + (((2 * (QID)) + 1)
> * (4 << (DSTRD))) // Completion Queue y (NVM) Head Doorbell
> +
> +
> +#pragma pack(1)
> +
> +//
> +// 3.1.1 Offset 00h: CAP - Controller Capabilities
> +//
> +typedef struct {
> + UINT16 Mqes; // Maximum Queue Entries Supported
> + UINT8 Cqr:1; // Contiguous Queues Required
> + UINT8 Ams:2; // Arbitration Mechanism Supported
> + UINT8 Rsvd1:5;
> + UINT8 To; // Timeout
> + UINT16 Dstrd:4;
> + UINT16 Rsvd2:1;
> + UINT16 Css:4; // Command Sets Supported
> + UINT16 Rsvd3:7;
> + UINT8 Mpsmin:4;
> + UINT8 Mpsmax:4;
> + UINT8 Rsvd4;
> +} NVME_CAP;
> +
> +//
> +// 3.1.2 Offset 08h: VS - Version
> +//
> +typedef struct {
> + UINT16 Mnr; // Minor version number
> + UINT16 Mjr; // Major version number
> +} NVME_VER;
> +
> +//
> +// 3.1.5 Offset 14h: CC - Controller Configuration
> +//
> +typedef struct {
> + UINT16 En:1; // Enable
> + UINT16 Rsvd1:3;
> + UINT16 Css:3; // Command Set Selected
> + UINT16 Mps:4; // Memory Page Size
> + UINT16 Ams:3; // Arbitration Mechanism Selected
> + UINT16 Shn:2; // Shutdown Notification
> + UINT8 Iosqes:4; // I/O Submission Queue Entry Size
> + UINT8 Iocqes:4; // I/O Completion Queue Entry Size
> + UINT8 Rsvd2;
> +} NVME_CC;
> +
> +//
> +// 3.1.6 Offset 1Ch: CSTS - Controller Status
> +//
> +typedef struct {
> + UINT32 Rdy:1; // Ready
> + UINT32 Cfs:1; // Controller Fatal Status
> + UINT32 Shst:2; // Shutdown Status
> + UINT32 Nssro:1; // NVM Subsystem Reset Occurred
> + UINT32 Rsvd1:27;
> +} NVME_CSTS;
> +
> +//
> +// 3.1.8 Offset 24h: AQA - Admin Queue Attributes
> +//
> +typedef struct {
> + UINT16 Asqs:12; // Submission Queue Size
> + UINT16 Rsvd1:4;
> + UINT16 Acqs:12; // Completion Queue Size
> + UINT16 Rsvd2:4;
> +} NVME_AQA;
> +
> +//
> +// 3.1.9 Offset 28h: ASQ - Admin Submission Queue Base Address
> +//
> +#define NVME_ASQ UINT64
> +
> +//
> +// 3.1.10 Offset 30h: ACQ - Admin Completion Queue Base Address
> +//
> +#define NVME_ACQ UINT64
> +
> +//
> +// 3.1.11 Offset (1000h + ((2y) * (4 << CAP.DSTRD))): SQyTDBL - Submission
> Queue y Tail Doorbell
> +//
> +typedef struct {
> + UINT16 Sqt;
> + UINT16 Rsvd1;
> +} NVME_SQTDBL;
> +
> +//
> +// 3.1.12 Offset (1000h + ((2y + 1) * (4 << CAP.DSTRD))): CQyHDBL -
> Completion Queue y Head Doorbell
> +//
> +typedef struct {
> + UINT16 Cqh;
> + UINT16 Rsvd1;
> +} NVME_CQHDBL;
> +
> +//
> +// NVM command set structures
> +//
> +// Read Command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting Sector Address */
> + //
> + // CDW 12
> + //
> + UINT16 Nlb; /* Number of Sectors */
> + UINT16 Rsvd1:10;
> + UINT16 Prinfo:4; /* Protection Info Check */
> + UINT16 Fua:1; /* Force Unit Access */
> + UINT16 Lr:1; /* Limited Retry */
> + //
> + // CDW 13
> + //
> + UINT32 Af:4; /* Access Frequency */
> + UINT32 Al:2; /* Access Latency */
> + UINT32 Sr:1; /* Sequential Request */
> + UINT32 In:1; /* Incompressible */
> + UINT32 Rsvd2:24;
> + //
> + // CDW 14
> + //
> + UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag
> */
> + //
> + // CDW 15
> + //
> + UINT16 Elbat; /* Expected Logical Block Application Tag */
> + UINT16 Elbatm; /* Expected Logical Block Application Tag
> Mask */
> +} NVME_READ;
> +
> +//
> +// Write Command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting Sector Address */
> + //
> + // CDW 12
> + //
> + UINT16 Nlb; /* Number of Sectors */
> + UINT16 Rsvd1:10;
> + UINT16 Prinfo:4; /* Protection Info Check */
> + UINT16 Fua:1; /* Force Unit Access */
> + UINT16 Lr:1; /* Limited Retry */
> + //
> + // CDW 13
> + //
> + UINT32 Af:4; /* Access Frequency */
> + UINT32 Al:2; /* Access Latency */
> + UINT32 Sr:1; /* Sequential Request */
> + UINT32 In:1; /* Incompressible */
> + UINT32 Rsvd2:24;
> + //
> + // CDW 14
> + //
> + UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
> + //
> + // CDW 15
> + //
> + UINT16 Lbat; /* Logical Block Application Tag */
> + UINT16 Lbatm; /* Logical Block Application Tag Mask */
> +} NVME_WRITE;
> +
> +//
> +// Flush
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Flush; /* Flush */
> +} NVME_FLUSH;
> +
> +//
> +// Write Uncorrectable command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting LBA */
> + //
> + // CDW 12
> + //
> + UINT32 Nlb:16; /* Number of Logical Blocks */
> + UINT32 Rsvd1:16;
> +} NVME_WRITE_UNCORRECTABLE;
> +
> +//
> +// Write Zeroes command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting LBA */
> + //
> + // CDW 12
> + //
> + UINT16 Nlb; /* Number of Logical Blocks */
> + UINT16 Rsvd1:10;
> + UINT16 Prinfo:4; /* Protection Info Check */
> + UINT16 Fua:1; /* Force Unit Access */
> + UINT16 Lr:1; /* Limited Retry */
> + //
> + // CDW 13
> + //
> + UINT32 Rsvd2;
> + //
> + // CDW 14
> + //
> + UINT32 Ilbrt; /* Initial Logical Block Reference Tag */
> + //
> + // CDW 15
> + //
> + UINT16 Lbat; /* Logical Block Application Tag */
> + UINT16 Lbatm; /* Logical Block Application Tag Mask */
> +} NVME_WRITE_ZEROES;
> +
> +//
> +// Compare command
> +//
> +typedef struct {
> + //
> + // CDW 10, 11
> + //
> + UINT64 Slba; /* Starting LBA */
> + //
> + // CDW 12
> + //
> + UINT16 Nlb; /* Number of Logical Blocks */
> + UINT16 Rsvd1:10;
> + UINT16 Prinfo:4; /* Protection Info Check */
> + UINT16 Fua:1; /* Force Unit Access */
> + UINT16 Lr:1; /* Limited Retry */
> + //
> + // CDW 13
> + //
> + UINT32 Rsvd2;
> + //
> + // CDW 14
> + //
> + UINT32 Eilbrt; /* Expected Initial Logical Block Reference Tag
> */
> + //
> + // CDW 15
> + //
> + UINT16 Elbat; /* Expected Logical Block Application Tag */
> + UINT16 Elbatm; /* Expected Logical Block Application Tag
> Mask */
> +} NVME_COMPARE;
> +
> +typedef union {
> + NVME_READ Read;
> + NVME_WRITE Write;
> + NVME_FLUSH Flush;
> + NVME_WRITE_UNCORRECTABLE WriteUncorrectable;
> + NVME_WRITE_ZEROES WriteZeros;
> + NVME_COMPARE Compare;
> +} NVME_CMD;
> +
> +typedef struct {
> + UINT16 Mp; /* Maximum Power */
> + UINT8 Rsvd1; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Mps:1; /* Max Power Scale */
> + UINT8 Nops:1; /* Non-Operational State */
> + UINT8 Rsvd2:6; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT32 Enlat; /* Entry Latency */
> + UINT32 Exlat; /* Exit Latency */
> + UINT8 Rrt:5; /* Relative Read Throughput */
> + UINT8 Rsvd3:3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Rrl:5; /* Relative Read Leatency */
> + UINT8 Rsvd4:3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Rwt:5; /* Relative Write Throughput */
> + UINT8 Rsvd5:3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Rwl:5; /* Relative Write Leatency */
> + UINT8 Rsvd6:3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 Rsvd7[16]; /* Reserved as of Nvm Express 1.1 Spec */
> +} NVME_PSDESCRIPTOR;
> +
> +//
> +// Identify Controller Data
> +//
> +typedef struct {
> + //
> + // Controller Capabilities and Features 0-255
> + //
> + UINT16 Vid; /* PCI Vendor ID */
> + UINT16 Ssvid; /* PCI sub-system vendor ID */
> + UINT8 Sn[20]; /* Produce serial number */
> +
> + UINT8 Mn[40]; /* Proeduct model number */
> + UINT8 Fr[8]; /* Firmware Revision */
> + UINT8 Rab; /* Recommended Arbitration Burst */
> + UINT8 Ieee_oiu[3]; /* Organization Unique Identifier */
> + UINT8 Cmic; /* Multi-interface Capabilities */
> + UINT8 Mdts; /* Maximum Data Transfer Size */
> + UINT8 Cntlid[2]; /* Controller ID */
> + UINT8 Rsvd1[176]; /* Reserved as of Nvm Express 1.1 Spec */
> + //
> + // Admin Command Set Attributes
> + //
> + UINT16 Oacs; /* Optional Admin Command Support */
> + UINT8 Acl; /* Abort Command Limit */
> + UINT8 Aerl; /* Async Event Request Limit */
> + UINT8 Frmw; /* Firmware updates */
> + UINT8 Lpa; /* Log Page Attributes */
> + UINT8 Elpe; /* Error Log Page Entries */
> + UINT8 Npss; /* Number of Power States Support */
> + UINT8 Avscc; /* Admin Vendor Specific Command
> Configuration */
> + UINT8 Apsta; /* Autonomous Power State Transition
> Attributes */
> + UINT8 Rsvd2[246]; /* Reserved as of Nvm Express 1.1 Spec */
> + //
> + // NVM Command Set Attributes
> + //
> + UINT8 Sqes; /* Submission Queue Entry Size */
> + UINT8 Cqes; /* Completion Queue Entry Size */
> + UINT16 Rsvd3; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT32 Nn; /* Number of Namespaces */
> + UINT16 Oncs; /* Optional NVM Command Support */
> + UINT16 Fuses; /* Fused Operation Support */
> + UINT8 Fna; /* Format NVM Attributes */
> + UINT8 Vwc; /* Volatile Write Cache */
> + UINT16 Awun; /* Atomic Write Unit Normal */
> + UINT16 Awupf; /* Atomic Write Unit Power Fail */
> + UINT8 Nvscc; /* NVM Vendor Specific Command
> Configuration */
> + UINT8 Rsvd4; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT16 Acwu; /* Atomic Compare & Write Unit */
> + UINT16 Rsvd5; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT32 Sgls; /* SGL Support */
> + UINT8 Rsvd6[164]; /* Reserved as of Nvm Express 1.1 Spec */
> + //
> + // I/O Command set Attributes
> + //
> + UINT8 Rsvd7[1344]; /* Reserved as of Nvm Express 1.1 Spec */
> + //
> + // Power State Descriptors
> + //
> + NVME_PSDESCRIPTOR PsDescriptor[32];
> +
> + UINT8 VendorData[1024]; /* Vendor specific Data */
> +} NVME_ADMIN_CONTROLLER_DATA;
> +
> +typedef struct {
> + UINT16 Security : 1; /* supports security send/receive
> commands */
> + UINT16 Format : 1; /* supports format nvm command */
> + UINT16 Firmware : 1; /* supports firmware
> activate/download commands */
> + UINT16 Oacs_rsvd : 13;
> + } OACS; // optional admin command support:
> NVME_ADMIN_CONTROLLER_DATA.Oacs
> +
> +typedef struct {
> + UINT16 Ms; /* Metadata Size */
> + UINT8 Lbads; /* LBA Data Size */
> + UINT8 Rp:2; /* Relative Performance */
> + #define LBAF_RP_BEST 00b
> + #define LBAF_RP_BETTER 01b
> + #define LBAF_RP_GOOD 10b
> + #define LBAF_RP_DEGRADED 11b
> + UINT8 Rsvd1:6; /* Reserved as of Nvm Express 1.1 Spec */
> +} NVME_LBAFORMAT;
> +
> +//
> +// Identify Namespace Data
> +//
> +typedef struct {
> + //
> + // NVM Command Set Specific
> + //
> + UINT64 Nsze; /* Namespace Size (total number of blocks
> in formatted namespace) */
> + UINT64 Ncap; /* Namespace Capacity (max number of
> logical blocks) */
> + UINT64 Nuse; /* Namespace Utilization */
> + UINT8 Nsfeat; /* Namespace Features */
> + UINT8 Nlbaf; /* Number of LBA Formats */
> + UINT8 Flbas; /* Formatted LBA Size */
> + UINT8 Mc; /* Metadata Capabilities */
> + UINT8 Dpc; /* End-to-end Data Protection capabilities
> */
> + UINT8 Dps; /* End-to-end Data Protection Type Settings
> */
> + UINT8 Nmic; /* Namespace Multi-path I/O and
> Namespace Sharing Capabilities */
> + UINT8 Rescap; /* Reservation Capabilities */
> + UINT8 Rsvd1[88]; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT64 Eui64; /* IEEE Extended Unique Identifier */
> + //
> + // LBA Format
> + //
> + NVME_LBAFORMAT LbaFormat[16];
> +
> + UINT8 Rsvd2[192]; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT8 VendorData[3712]; /* Vendor specific Data */
> +} NVME_ADMIN_NAMESPACE_DATA;
> +
> +//
> +// NvmExpress Admin Identify Cmd
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Cns:2;
> + UINT32 Rsvd1:30;
> +} NVME_ADMIN_IDENTIFY;
> +
> +//
> +// NvmExpress Admin Create I/O Completion Queue
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Qid:16; /* Queue Identifier */
> + UINT32 Qsize:16; /* Queue Size */
> +
> + //
> + // CDW 11
> + //
> + UINT32 Pc:1; /* Physically Contiguous */
> + UINT32 Ien:1; /* Interrupts Enabled */
> + UINT32 Rsvd1:14; /* reserved as of Nvm Express 1.1 Spec */
> + UINT32 Iv:16; /* Interrupt Vector */
> +} NVME_ADMIN_CRIOCQ;
> +
> +//
> +// NvmExpress Admin Create I/O Submission Queue
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Qid:16; /* Queue Identifier */
> + UINT32 Qsize:16; /* Queue Size */
> +
> + //
> + // CDW 11
> + //
> + UINT32 Pc:1; /* Physically Contiguous */
> + UINT32 Qprio:2; /* Queue Priority */
> + UINT32 Rsvd1:13; /* Reserved as of Nvm Express 1.1 Spec */
> + UINT32 Cqid:16; /* Completion Queue ID */
> +} NVME_ADMIN_CRIOSQ;
> +
> +//
> +// NvmExpress Admin Delete I/O Completion Queue
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT16 Qid;
> + UINT16 Rsvd1;
> +} NVME_ADMIN_DEIOCQ;
> +
> +//
> +// NvmExpress Admin Delete I/O Submission Queue
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT16 Qid;
> + UINT16 Rsvd1;
> +} NVME_ADMIN_DEIOSQ;
> +
> +//
> +// NvmExpress Admin Security Send
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Resv:8; /* Reserve */
> + UINT32 Spsp:16; /* SP Specific */
> + UINT32 Secp:8; /* Security Protocol */
> +
> + //
> + // CDW 11
> + //
> + UINT32 Tl; /* Transfer Length */
> +} NVME_ADMIN_SECSEND;
> +
> +//
> +// NvmExpress Admin Abort Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Sqid:16; /* Submission Queue identifier */
> + UINT32 Cid:16; /* Command Identifier */
> +} NVME_ADMIN_ABORT;
> +
> +//
> +// NvmExpress Admin Firmware Activate Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Fs:3; /* Submission Queue identifier */
> + UINT32 Aa:2; /* Command Identifier */
> + UINT32 Rsvd1:27;
> +} NVME_ADMIN_FIRMWARE_ACTIVATE;
> +
> +//
> +// NvmExpress Admin Firmware Image Download Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Numd; /* Number of Dwords */
> + //
> + // CDW 11
> + //
> + UINT32 Ofst; /* Offset */
> +} NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD;
> +
> +//
> +// NvmExpress Admin Get Features Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Fid:8; /* Feature Identifier */
> + UINT32 Sel:3; /* Select */
> + UINT32 Rsvd1:21;
> +} NVME_ADMIN_GET_FEATURES;
> +
> +//
> +// NvmExpress Admin Get Log Page Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Lid:8; /* Log Page Identifier */
> + #define LID_ERROR_INFO
> + #define LID_SMART_INFO
> + #define LID_FW_SLOT_INFO
> + UINT32 Rsvd1:8;
> + UINT32 Numd:12; /* Number of Dwords */
> + UINT32 Rsvd2:4; /* Reserved as of Nvm Express 1.1 Spec */
> +} NVME_ADMIN_GET_LOG_PAGE;
> +
> +//
> +// NvmExpress Admin Set Features Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Fid:8; /* Feature Identifier */
> + UINT32 Rsvd1:23;
> + UINT32 Sv:1; /* Save */
> +} NVME_ADMIN_SET_FEATURES;
> +
> +//
> +// NvmExpress Admin Format NVM Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Lbaf:4; /* LBA Format */
> + UINT32 Ms:1; /* Metadata Settings */
> + UINT32 Pi:3; /* Protection Information */
> + UINT32 Pil:1; /* Protection Information Location */
> + UINT32 Ses:3; /* Secure Erase Settings */
> + UINT32 Rsvd1:20;
> +} NVME_ADMIN_FORMAT_NVM;
> +
> +//
> +// NvmExpress Admin Security Receive Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Rsvd1:8;
> + UINT32 Spsp:16; /* SP Specific */
> + UINT32 Secp:8; /* Security Protocol */
> + //
> + // CDW 11
> + //
> + UINT32 Al; /* Allocation Length */
> +} NVME_ADMIN_SECURITY_RECEIVE;
> +
> +//
> +// NvmExpress Admin Security Send Command
> +//
> +typedef struct {
> + //
> + // CDW 10
> + //
> + UINT32 Rsvd1:8;
> + UINT32 Spsp:16; /* SP Specific */
> + UINT32 Secp:8; /* Security Protocol */
> + //
> + // CDW 11
> + //
> + UINT32 Tl; /* Transfer Length */
> +} NVME_ADMIN_SECURITY_SEND;
> +
> +typedef union {
> + NVME_ADMIN_IDENTIFY Identify;
> + NVME_ADMIN_CRIOCQ CrIoCq;
> + NVME_ADMIN_CRIOSQ CrIoSq;
> + NVME_ADMIN_DEIOCQ DeIoCq;
> + NVME_ADMIN_DEIOSQ DeIoSq;
> + NVME_ADMIN_ABORT Abort;
> + NVME_ADMIN_FIRMWARE_ACTIVATE Activate;
> + NVME_ADMIN_FIRMWARE_IMAGE_DOWNLOAD
> FirmwareImageDownload;
> + NVME_ADMIN_GET_FEATURES GetFeatures;
> + NVME_ADMIN_GET_LOG_PAGE GetLogPage;
> + NVME_ADMIN_SET_FEATURES SetFeatures;
> + NVME_ADMIN_FORMAT_NVM FormatNvm;
> + NVME_ADMIN_SECURITY_RECEIVE SecurityReceive;
> + NVME_ADMIN_SECURITY_SEND SecuritySend;
> +} NVME_ADMIN_CMD;
> +
> +typedef struct {
> + UINT32 Cdw10;
> + UINT32 Cdw11;
> + UINT32 Cdw12;
> + UINT32 Cdw13;
> + UINT32 Cdw14;
> + UINT32 Cdw15;
> +} NVME_RAW;
> +
> +typedef union {
> + NVME_ADMIN_CMD Admin; // Union of Admin commands
> + NVME_CMD Nvm; // Union of Nvm commands
> + NVME_RAW Raw;
> +} NVME_PAYLOAD;
> +
> +//
> +// Submission Queue
> +//
> +typedef struct {
> + //
> + // CDW 0, Common to all comnmands
> + //
> + UINT8 Opc; // Opcode
> + UINT8 Fuse:2; // Fused Operation
> + UINT8 Rsvd1:5;
> + UINT8 Psdt:1; // PRP or SGL for Data Transfer
> + UINT16 Cid; // Command Identifier
> +
> + //
> + // CDW 1
> + //
> + UINT32 Nsid; // Namespace Identifier
> +
> + //
> + // CDW 2,3
> + //
> + UINT64 Rsvd2;
> +
> + //
> + // CDW 4,5
> + //
> + UINT64 Mptr; // Metadata Pointer
> +
> + //
> + // CDW 6-9
> + //
> + UINT64 Prp[2]; // First and second PRP entries
> +
> + NVME_PAYLOAD Payload;
> +
> +} NVME_SQ;
> +
> +//
> +// Completion Queue
> +//
> +typedef struct {
> + //
> + // CDW 0
> + //
> + UINT32 Dword0;
> + //
> + // CDW 1
> + //
> + UINT32 Rsvd1;
> + //
> + // CDW 2
> + //
> + UINT16 Sqhd; // Submission Queue Head Pointer
> + UINT16 Sqid; // Submission Queue Identifier
> + //
> + // CDW 3
> + //
> + UINT16 Cid; // Command Identifier
> + UINT16 Pt:1; // Phase Tag
> + UINT16 Sc:8; // Status Code
> + UINT16 Sct:3; // Status Code Type
> + UINT16 Rsvd2:2;
> + UINT16 Mo:1; // More
> + UINT16 Dnr:1; // Retry
> +} NVME_CQ;
> +
> +//
> +// Nvm Express Admin cmd opcodes
> +//
> +#define NVME_ADMIN_DELIOSQ_OPC 0
> +#define NVME_ADMIN_CRIOSQ_OPC 1
> +#define NVME_ADMIN_DELIOCQ_OPC 4
> +#define NVME_ADMIN_CRIOCQ_OPC 5
> +#define NVME_ADMIN_IDENTIFY_OPC 6
> +#define NVME_ADMIN_SECURITY_SEND_OPC 0x81
> +#define NVME_ADMIN_SECURITY_RECV_OPC 0x82
> +
> +#define NVME_IO_FLUSH_OPC 0
> +#define NVME_IO_WRITE_OPC 1
> +#define NVME_IO_READ_OPC 2
> +
> +//
> +// Offset from the beginning of private Data queue Buffer
> +//
> +#define NVME_ASQ_BUF_OFFSET EFI_PAGE_SIZE
> +
> +#pragma pack()
> +
> +#endif
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
> new file mode 100644
> index 000000000000..17fda410dc54
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordCommon.h
> @@ -0,0 +1,65 @@
> +/** @file
> + Opal Password common header file.
> +
> +Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef _OPAL_PASSWORD_COMMON_H_
> +#define _OPAL_PASSWORD_COMMON_H_
> +
> +#define OPAL_DEVICE_TYPE_UNKNOWN 0x0
> +#define OPAL_DEVICE_TYPE_ATA 0x1
> +#define OPAL_DEVICE_TYPE_NVME 0x2
> +
> +typedef struct {
> + UINT16 Segment;
> + UINT8 Bus;
> + UINT8 Device;
> + UINT8 Function;
> + UINT8 Reserved;
> +} OPAL_PCI_DEVICE;
> +
> +typedef struct {
> + UINT16 Length;
> + OPAL_PCI_DEVICE Device;
> + UINT8 PasswordLength;
> + UINT8 Password[32];
> + UINT16 OpalBaseComId;
> + UINT32 BarAddr;
> +} OPAL_DEVICE_COMMON;
> +
> +#define OPAL_DEVICE_ATA_GUID { 0xcb934fe1, 0xb8cd, 0x46b1, { 0xa0, 0x58,
> 0xdd, 0xcb, 0x7, 0xb7, 0xb4, 0x17 } }
> +
> +typedef struct {
> + UINT16 Length;
> + OPAL_PCI_DEVICE Device;
> + UINT8 PasswordLength;
> + UINT8 Password[32];
> + UINT16 OpalBaseComId;
> + UINT32 BarAddr;
> + UINT16 Port;
> + UINT16 PortMultiplierPort;
> +} OPAL_DEVICE_ATA;
> +
> +#define OPAL_DEVICE_NVME_GUID { 0xde116925, 0xaf7f, 0x42d9, { 0x83,
> 0xc0, 0x7e, 0xd6, 0x26, 0x59, 0x0, 0xfb } }
> +
> +typedef struct {
> + UINT16 Length;
> + OPAL_PCI_DEVICE Device;
> + UINT8 PasswordLength;
> + UINT8 Password[32];
> + UINT16 OpalBaseComId;
> + UINT32 BarAddr;
> + UINT32 NvmeNamespaceId;
> + OPAL_PCI_DEVICE PciBridgeNode[0];
> +} OPAL_DEVICE_NVME;
> +
> +#endif // _OPAL_PASSWORD_COMMON_H_
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> new file mode 100644
> index 000000000000..0ac550a72873
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordDxe.inf
> @@ -0,0 +1,81 @@
> +## @file
> +# This is a OpalPasswordDxe driver.
> +#
> +# This module is used to Management the Opal feature
> +# for Opal supported devices.
> +#
> +# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be found
> at
> +# http://opensource.org/licenses/bsd-license.php
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +##
> +[Defines]
> + INF_VERSION = 0x00010007
> + BASE_NAME = OpalPasswordDxe
> + FILE_GUID =
> E3E4048D-6C0C-43E4-AE1C-FFB579D8EF41
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + ENTRY_POINT = EfiDriverEntryPoint
> + UNLOAD_IMAGE = OpalEfiDriverUnload
> +
> +#
> +# The following information is for reference only and not required by the build
> tools.
> +#
> +# VALID_ARCHITECTURES = IA32 X64 IPF EBC
> +#
> +
> +[Sources]
> + OpalDriver.c
> + OpalDriver.h
> + OpalPasswordCommon.h
> + OpalHii.c
> + OpalHii.h
> + OpalHiiCallbacks.c
> + OpalHiiFormValues.h
> + OpalHiiFormStrings.uni
> + OpalPasswordForm.vfr
> + ComponentName.c
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + SecurityPkg/SecurityPkg.dec
> +
> +[LibraryClasses]
> + BaseLib
> + MemoryAllocationLib
> + UefiBootServicesTableLib
> + UefiDriverEntryPoint
> + UefiRuntimeServicesTableLib
> + DxeServicesTableLib
> + UefiHiiServicesLib
> + BaseMemoryLib
> + DebugLib
> + HiiLib
> + PrintLib
> + DevicePathLib
> + UefiLib
> + TcgStorageOpalLib
> + Tcg2PhysicalPresenceLib
> + PciLib
> + S3BootScriptLib
> + LockBoxLib
> +
> +[Protocols]
> + gEfiHiiConfigAccessProtocolGuid ## PRODUCES
> + gEfiStorageSecurityCommandProtocolGuid ## CONSUMES
> + gEfiComponentNameProtocolGuid ## PRODUCES
> + gEfiComponentName2ProtocolGuid ## PRODUCES
> + gEfiBlockIoProtocolGuid ## CONSUMES
> + gEfiPciIoProtocolGuid ## CONSUMES
> + gEfiDevicePathToTextProtocolGuid ## CONSUMES
> +
> +[Guids]
> + gEfiEndOfDxeEventGroupGuid ## CONSUMES
> ## Event
> +
> +[Depex]
> + gEfiHiiStringProtocolGuid AND gEfiHiiDatabaseProtocolGuid
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
> new file mode 100644
> index 000000000000..cba388723305
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordForm.vfr
> @@ -0,0 +1,309 @@
> +/** @file
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +#include "OpalHiiFormValues.h"
> +
> +
> +#define EFI_HII_PLATFORM_SETUP_FORMSET_GUID \
> + { 0x93039971, 0x8545, 0x4b04, { 0xb4, 0x5e, 0x32, 0xeb, 0x83, 0x26, 0x4,
> 0xe } }
> +
> +formset
> + guid = SETUP_FORMSET_GUID,
> + title = STRING_TOKEN(STR_OPAL),
> + help = STRING_TOKEN(STR_FORM_SET_HELP),
> + classguid = EFI_HII_PLATFORM_SETUP_FORMSET_GUID,
> +
> + // Define a Buffer Storage (EFI_IFR_VARSTORE) that will be filled
> + // out initially through extractConfig call
> + varstore OPAL_HII_CONFIGURATION, // This is the Data
> structure type
> + name = OpalHiiConfig, // Define referenced name
> in vfr
> + guid = SETUP_VARIABLE_GUID; // GUID of this Buffer
> storage
> +
> +form formid = FORMID_VALUE_MAIN_MENU,
> + title = STRING_TOKEN(STR_OPAL);
> +
> + //CONFIG_VARIABLE(HII_KEY(HII_KEY_ID_VAR_SUPPORTED_DISKS),
> SupportedDisks, 0x0, 0xFFFF);
> + suppressif TRUE;
> + numeric
> + name = SupportedDisks,
> + varid = OpalHiiConfig.SupportedDisks,
> + prompt = STRING_TOKEN(STR_NULL),
> + help = STRING_TOKEN(STR_NULL),
> + flags = INTERACTIVE,
> + key = 0x8002,
> + minimum = 0x0,
> + maximum = 0xFFFF,
> + endnumeric;
> + endif;
> +
> + subtitle text = STRING_TOKEN(STR_MAIN_OPAL_VERSION);
> +
> + subtitle text = STRING_TOKEN(STR_NULL);
> +
> + subtitle text = STRING_TOKEN(STR_MAIN_PHY_DISKS_LBL);
> +
> + //DISK( 0 );
> + suppressif ( questionref(SupportedDisks) & ( 0x1 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_0 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8001;
> + endif;
> +
> + //DISK( 1 );
> + suppressif ( questionref(SupportedDisks) & ( 0x2 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_1 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8101;
> + endif;
> +
> + //DISK( 2 );
> + suppressif ( questionref(SupportedDisks) & ( 0x4 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_2 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8201;
> + endif;
> +
> + //DISK( 3 );
> + suppressif ( questionref(SupportedDisks) & ( 0x8 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_3 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8301;
> + endif;
> +
> + //DISK( 4 );
> + suppressif ( questionref(SupportedDisks) & ( 0x10 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_4 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8401;
> + endif;
> +
> + //DISK( 5 );
> + suppressif ( questionref(SupportedDisks) & ( 0x20 ) ) == 0;
> + goto FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + prompt = STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_5 ),
> + help =
> STRING_TOKEN(STR_MAIN_GOTO_DISK_INFO_HELP),
> + flags = INTERACTIVE,
> + key = 0x8501;
> + endif;
> +
> + //No disks on system
> + suppressif ideqval OpalHiiConfig.NumDisks > 0;
> + text
> + help = STRING_TOKEN(STR_NULL),
> + text =
> STRING_TOKEN(STR_MAIN_NO_DISKS_PRESENT_LBL);
> + endif;
> +
> + subtitle text = STRING_TOKEN(STR_NULL);
> +
> + grayoutif TRUE;
> + text
> + help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
> + text = STRING_TOKEN(STR_BLOCKSID_STATUS);
> + text
> + help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
> + text = STRING_TOKEN(STR_BLOCKSID_STATUS1);
> + text
> + help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
> + text = STRING_TOKEN(STR_BLOCKSID_STATUS2);
> + text
> + help = STRING_TOKEN(STR_BLOCKSID_STATUS_HELP),
> + text = STRING_TOKEN(STR_BLOCKSID_STATUS3);
> + subtitle text = STRING_TOKEN(STR_NULL);
> + endif;
> +
> + oneof varid = OpalHiiConfig.EnableBlockSid,
> + questionid = 0x8004,
> + prompt = STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID),
> + help =
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_HELP),
> + flags = INTERACTIVE,
> + option text = STRING_TOKEN(STR_NONE), value = 0, flags = DEFAULT |
> MANUFACTURING | RESET_REQUIRED;
> + option text = STRING_TOKEN(STR_ENABLED), value = 1, flags =
> RESET_REQUIRED;
> + option text = STRING_TOKEN(STR_DISABLED), value = 2, flags =
> RESET_REQUIRED;
> + option text =
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_TRUE), value = 3, flags =
> RESET_REQUIRED;
> + option text =
> STRING_TOKEN(STR_DISK_INFO_ENABLE_BLOCKSID_FALSE), value = 4, flags =
> RESET_REQUIRED;
> + option text =
> STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_TRUE), value = 5, flags =
> RESET_REQUIRED;
> + option text =
> STRING_TOKEN(STR_DISK_INFO_DISABLE_BLOCKSID_FALSE), value = 6, flags =
> RESET_REQUIRED;
> + endoneof;
> +
> +
> +
> +endform; // MAIN MENU FORM
> +
> +//
> +///////////////// DISK INFO FORM /////////////////
> +//
> +form formid = FORMID_VALUE_DISK_INFO_FORM_MAIN,
> + title = STRING_TOKEN(STR_OPAL);
> +
> + suppressif TRUE;
> + numeric
> + name = SelectedDiskAvailableActions,
> + varid = OpalHiiConfig.SelectedDiskAvailableActions,
> + prompt = STRING_TOKEN(STR_NULL),
> + help = STRING_TOKEN(STR_NULL),
> + flags = INTERACTIVE,
> + key = 0x8003,
> + minimum = 0x0,
> + maximum = 0xFFFF,
> + endnumeric;
> + endif;
> +
> + suppressif TRUE;
> + checkbox varid = OpalHiiConfig.KeepUserDataForced,
> + prompt = STRING_TOKEN(STR_NULL),
> + help = STRING_TOKEN(STR_NULL),
> + endcheckbox;
> + endif;
> +
> + subtitle text = STRING_TOKEN(STR_MAIN_OPAL_VERSION);
> +
> + subtitle text = STRING_TOKEN(STR_NULL);
> +
> + text
> + help = STRING_TOKEN(STR_NULL),
> + text = STRING_TOKEN(STR_DISK_INFO_SELECTED_DISK_NAME);
> +
> + subtitle text = STRING_TOKEN(STR_NULL);
> +
> + subtitle text = STRING_TOKEN(STR_OPAL_REQUESTS_LBL);
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_SET_ADMIN_PWD ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.SetAdminPwd,
> + prompt =
> STRING_TOKEN(STR_DISK_INFO_SET_ADMIN_PSWD),
> + help =
> STRING_TOKEN(STR_DISK_INFO_SET_ADMIN_PSWD_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8005,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_SET_USER_PWD ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.DisableUser == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.SetUserPwd,
> + prompt = STRING_TOKEN(STR_DISK_INFO_SET_USER_PSWD),
> + help =
> STRING_TOKEN(STR_DISK_INFO_SET_USER_PSWD_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8006,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_SECURE_ERASE ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.SecureErase,
> + prompt = STRING_TOKEN(STR_DISK_INFO_SECURE_ERASE),
> + help =
> STRING_TOKEN(STR_DISK_INFO_SECURE_ERASE_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8007,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_REVERT ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetAdminPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetUserPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SecureErase == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.DisableUser == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.Revert,
> + prompt = STRING_TOKEN(STR_DISK_INFO_REVERT),
> + help = STRING_TOKEN(STR_DISK_INFO_REVERT_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8008,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ideqval OpalHiiConfig.OpalRequest.Revert == 0;
> + grayoutif ideqval OpalHiiConfig.KeepUserDataForced == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.KeepUserData,
> + prompt =
> STRING_TOKEN(STR_KEEP_USER_DATA_PROMPT),
> + help = STRING_TOKEN(STR_KEEP_USER_DATA_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x8009,
> + endcheckbox;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_PSID_REVERT ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetAdminPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetUserPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SecureErase == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.DisableUser == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.EnableFeature == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.PsidRevert,
> + prompt = STRING_TOKEN(STR_DISK_INFO_PSID_REVERT),
> + help =
> STRING_TOKEN(STR_DISK_INFO_PSID_REVERT_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x800A,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_DISABLE_USER ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.SetUserPwd == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.Revert == 1;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.DisableUser,
> + prompt = STRING_TOKEN(STR_DISK_INFO_DISABLE_USER),
> + help =
> STRING_TOKEN(STR_DISK_INFO_DISABLE_USER_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x800B,
> + endcheckbox;
> + endif;
> + endif;
> + endif;
> + endif;
> +
> + suppressif ( questionref(SelectedDiskAvailableActions) &
> HII_ACTION_ENABLE_FEATURE ) == 0;
> + grayoutif ideqval OpalHiiConfig.OpalRequest.PsidRevert == 1;
> + checkbox varid = OpalHiiConfig.OpalRequest.EnableFeature,
> + prompt = STRING_TOKEN(STR_DISK_INFO_ENABLE_FEATURE),
> + help =
> STRING_TOKEN(STR_DISK_INFO_ENABLE_FEATURE_HELP),
> + flags = INTERACTIVE | RESET_REQUIRED,
> + key = 0x800C,
> + endcheckbox;
> + endif;
> + endif;
> +
> +endform; // DISK INFO FORM
> +
> +endformset;
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
> new file mode 100644
> index 000000000000..1788b2ad3339
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.c
> @@ -0,0 +1,940 @@
> +/** @file
> + Opal Password PEI driver which is used to unlock Opal Password for S3.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#include "OpalPasswordPei.h"
> +
> +EFI_GUID mOpalDeviceAtaGuid = OPAL_DEVICE_ATA_GUID;
> +EFI_GUID mOpalDeviceNvmeGuid = OPAL_DEVICE_NVME_GUID;
> +
> +#define OPAL_PCIE_ROOTPORT_SAVESIZE (0x40)
> +#define STORE_INVALID_ROOTPORT_INDEX ((UINT8) -1)
> +
> +/**
> + Get IOMMU PPI.
> +
> + @return Pointer to IOMMU PPI.
> +
> +**/
> +EDKII_IOMMU_PPI *
> +GetIoMmu (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> + EDKII_IOMMU_PPI *IoMmu;
> +
> + IoMmu = NULL;
> + Status = PeiServicesLocatePpi (
> + &gEdkiiIoMmuPpiGuid,
> + 0,
> + NULL,
> + (VOID **) &IoMmu
> + );
> + if (!EFI_ERROR (Status) && (IoMmu != NULL)) {
> + return IoMmu;
> + }
> +
> + return NULL;
> +}
> +
> +/**
> + Allocates pages that are suitable for an OperationBusMasterCommonBuffer
> or
> + OperationBusMasterCommonBuffer64 mapping.
> +
> + @param Pages The number of pages to allocate.
> + @param HostAddress A pointer to store the base system
> memory address of the
> + allocated range.
> + @param DeviceAddress The resulting map address for the bus
> master PCI controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to Unmap().
> +
> + @retval EFI_SUCCESS The requested memory pages were
> allocated.
> + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal
> attribute bits are
> + MEMORY_WRITE_COMBINE and
> MEMORY_CACHED.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The memory pages could not be
> allocated.
> +
> +**/
> +EFI_STATUS
> +IoMmuAllocateBuffer (
> + IN UINTN Pages,
> + OUT VOID **HostAddress,
> + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + )
> +{
> + EFI_STATUS Status;
> + UINTN NumberOfBytes;
> + EFI_PHYSICAL_ADDRESS HostPhyAddress;
> + EDKII_IOMMU_PPI *IoMmu;
> +
> + *HostAddress = NULL;
> + *DeviceAddress = 0;
> + *Mapping = NULL;
> +
> + IoMmu = GetIoMmu ();
> +
> + if (IoMmu != NULL) {
> + Status = IoMmu->AllocateBuffer (
> + IoMmu,
> + EfiBootServicesData,
> + Pages,
> + HostAddress,
> + 0
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> +
> + NumberOfBytes = EFI_PAGES_TO_SIZE (Pages);
> + Status = IoMmu->Map (
> + IoMmu,
> + EdkiiIoMmuOperationBusMasterCommonBuffer,
> + *HostAddress,
> + &NumberOfBytes,
> + DeviceAddress,
> + Mapping
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
> + *HostAddress = NULL;
> + return EFI_OUT_OF_RESOURCES;
> + }
> + Status = IoMmu->SetAttribute (
> + IoMmu,
> + *Mapping,
> + EDKII_IOMMU_ACCESS_READ |
> EDKII_IOMMU_ACCESS_WRITE
> + );
> + if (EFI_ERROR (Status)) {
> + IoMmu->Unmap (IoMmu, *Mapping);
> + IoMmu->FreeBuffer (IoMmu, Pages, *HostAddress);
> + *Mapping = NULL;
> + *HostAddress = NULL;
> + return Status;
> + }
> + } else {
> + Status = PeiServicesAllocatePages (
> + EfiBootServicesData,
> + Pages,
> + &HostPhyAddress
> + );
> + if (EFI_ERROR (Status)) {
> + return EFI_OUT_OF_RESOURCES;
> + }
> + *HostAddress = (VOID *) (UINTN) HostPhyAddress;
> + *DeviceAddress = HostPhyAddress;
> + *Mapping = NULL;
> + }
> + return Status;
> +}
> +
> +/**
> + Frees memory that was allocated with AllocateBuffer().
> +
> + @param Pages The number of pages to free.
> + @param HostAddress The base system memory address of the
> allocated range.
> + @param Mapping The mapping value returned from Map().
> +
> +**/
> +VOID
> +IoMmuFreeBuffer (
> + IN UINTN Pages,
> + IN VOID *HostAddress,
> + IN VOID *Mapping
> + )
> +{
> + EDKII_IOMMU_PPI *IoMmu;
> +
> + IoMmu = GetIoMmu ();
> +
> + if (IoMmu != NULL) {
> + IoMmu->SetAttribute (IoMmu, Mapping, 0);
> + IoMmu->Unmap (IoMmu, Mapping);
> + IoMmu->FreeBuffer (IoMmu, Pages, HostAddress);
> + } else {
> + PeiServicesFreePages (
> + (EFI_PHYSICAL_ADDRESS) (UINTN) HostAddress,
> + Pages
> + );
> + }
> +}
> +
> +/**
> + Provide IO action support.
> +
> + @param[in] PeiDev The opal device need to perform
> trusted IO.
> + @param[in] IoType OPAL_IO_TYPE indicating whether to
> perform a Trusted Send or Trusted Receive.
> + @param[in] SecurityProtocol Security Protocol
> + @param[in] SpSpecific Security Protocol Specific
> + @param[in] TransferLength Transfer Length of Buffer (in bytes) -
> always a multiple of 512
> + @param[in] Buffer Address of Data to transfer
> +
> + @retval EFI_SUCCESS Perform the IO action success.
> + @retval Others Perform the IO action failed.
> +
> +**/
> +EFI_STATUS
> +PerformTrustedIo (
> + OPAL_PEI_DEVICE *PeiDev,
> + OPAL_IO_TYPE IoType,
> + UINT8 SecurityProtocol,
> + UINT16 SpSpecific,
> + UINTN TransferLength,
> + VOID *Buffer
> + )
> +{
> + EFI_STATUS Status;
> + UINTN BufferSizeBlocks;
> + EFI_ATA_COMMAND_BLOCK AtaCommandBlock;
> + OPAL_DEVICE_ATA *DevInfoAta;
> + AHCI_CONTEXT *AhciContext;
> + NVME_CONTEXT *NvmeContext;
> +
> + Status = EFI_DEVICE_ERROR;
> + if (PeiDev->DeviceType == OPAL_DEVICE_TYPE_ATA) {
> + DevInfoAta = (OPAL_DEVICE_ATA *) PeiDev->Device;
> + AhciContext = (AHCI_CONTEXT *) PeiDev->Context;
> +
> + BufferSizeBlocks = TransferLength / 512;
> +
> + ZeroMem( &AtaCommandBlock, sizeof( EFI_ATA_COMMAND_BLOCK ) );
> + AtaCommandBlock.AtaCommand = ( IoType == OpalSend ) ?
> ATA_COMMAND_TRUSTED_SEND : ATA_COMMAND_TRUSTED_RECEIVE;
> + AtaCommandBlock.AtaSectorCount = ( UINT8 )BufferSizeBlocks;
> + AtaCommandBlock.AtaSectorNumber = ( UINT8 )( BufferSizeBlocks >> 8 );
> + AtaCommandBlock.AtaFeatures = SecurityProtocol;
> + AtaCommandBlock.AtaCylinderLow = ( UINT8 )( SpSpecific >> 8 );
> + AtaCommandBlock.AtaCylinderHigh = ( UINT8 )( SpSpecific );
> + AtaCommandBlock.AtaDeviceHead = ATA_DEVICE_LBA;
> +
> +
> + ZeroMem( AhciContext->Buffer, HDD_PAYLOAD );
> + ASSERT( TransferLength <= HDD_PAYLOAD );
> +
> + if (IoType == OpalSend) {
> + CopyMem( AhciContext->Buffer, Buffer, TransferLength );
> + }
> +
> + Status = AhciPioTransfer(
> + AhciContext,
> + (UINT8) DevInfoAta->Port,
> + (UINT8) DevInfoAta->PortMultiplierPort,
> + NULL,
> + 0,
> + ( IoType == OpalSend ) ? FALSE : TRUE, // i/o direction
> + &AtaCommandBlock,
> + NULL,
> + AhciContext->Buffer,
> + (UINT32)TransferLength,
> + ATA_TIMEOUT
> + );
> +
> + if (IoType == OpalRecv) {
> + CopyMem( Buffer, AhciContext->Buffer, TransferLength );
> + }
> + } else if (PeiDev->DeviceType == OPAL_DEVICE_TYPE_NVME) {
> + NvmeContext = (NVME_CONTEXT *) PeiDev->Context;
> + Status = NvmeSecuritySendReceive (
> + NvmeContext,
> + IoType == OpalSend,
> + SecurityProtocol,
> + SwapBytes16(SpSpecific),
> + TransferLength,
> + Buffer
> + );
> + } else {
> + DEBUG((DEBUG_ERROR, "DeviceType(%x) not support.\n",
> PeiDev->DeviceType));
> + }
> +
> + return Status;
> +}
> +
> +/**
> + Send a security protocol command to a device that receives data and/or the
> result
> + of one or more commands sent by SendData.
> +
> + The ReceiveData function sends a security protocol command to the given
> MediaId.
> + The security protocol command sent is defined by SecurityProtocolId and
> contains
> + the security protocol specific data SecurityProtocolSpecificData. The function
> + returns the data from the security protocol command in PayloadBuffer.
> +
> + For devices supporting the SCSI command set, the security protocol
> command is sent
> + using the SECURITY PROTOCOL IN command defined in SPC-4.
> +
> + For devices supporting the ATA command set, the security protocol
> command is sent
> + using one of the TRUSTED RECEIVE commands defined in ATA8-ACS if
> PayloadBufferSize
> + is non-zero.
> +
> + If the PayloadBufferSize is zero, the security protocol command is sent using
> the
> + Trusted Non-Data command defined in ATA8-ACS.
> +
> + If PayloadBufferSize is too small to store the available data from the security
> + protocol command, the function shall copy PayloadBufferSize bytes into the
> + PayloadBuffer and return EFI_WARN_BUFFER_TOO_SMALL.
> +
> + If PayloadBuffer or PayloadTransferSize is NULL and PayloadBufferSize is
> non-zero,
> + the function shall return EFI_INVALID_PARAMETER.
> +
> + If the given MediaId does not support security protocol commands, the
> function shall
> + return EFI_UNSUPPORTED. If there is no media in the device, the function
> returns
> + EFI_NO_MEDIA. If the MediaId is not the ID for the current media in the
> device,
> + the function returns EFI_MEDIA_CHANGED.
> +
> + If the security protocol fails to complete within the Timeout period, the
> function
> + shall return EFI_TIMEOUT.
> +
> + If the security protocol command completes without an error, the function
> shall
> + return EFI_SUCCESS. If the security protocol command completes with an
> error, the
> + function shall return EFI_DEVICE_ERROR.
> +
> + @param This Indicates a pointer to the calling
> context.
> + @param MediaId ID of the medium to receive
> data from.
> + @param Timeout The timeout, in 100ns units, to
> use for the execution
> + of the security protocol
> command. A Timeout value of 0
> + means that this function will wait
> indefinitely for the
> + security protocol command to
> execute. If Timeout is greater
> + than zero, then this function will
> return EFI_TIMEOUT
> + if the time required to execute
> the receive data command
> + is greater than Timeout.
> + @param SecurityProtocolId The value of the "Security
> Protocol" parameter of
> + the security protocol command
> to be sent.
> + @param SecurityProtocolSpecificData The value of the "Security Protocol
> Specific" parameter
> + of the security protocol
> command to be sent.
> + @param PayloadBufferSize Size in bytes of the payload data
> buffer.
> + @param PayloadBuffer A pointer to a destination buffer
> to store the security
> + protocol command specific
> payload data for the security
> + protocol command. The caller is
> responsible for having
> + either implicit or explicit
> ownership of the buffer.
> + @param PayloadTransferSize A pointer to a buffer to store the
> size in bytes of the
> + data written to the payload data
> buffer.
> +
> + @retval EFI_SUCCESS The security protocol command
> completed successfully.
> + @retval EFI_WARN_BUFFER_TOO_SMALL The PayloadBufferSize was
> too small to store the available
> + data from the device. The
> PayloadBuffer contains the truncated data.
> + @retval EFI_UNSUPPORTED The given MediaId does not
> support security protocol commands.
> + @retval EFI_DEVICE_ERROR The security protocol command
> completed with an error.
> + @retval EFI_NO_MEDIA There is no media in the device.
> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
> current media.
> + @retval EFI_INVALID_PARAMETER The PayloadBuffer or
> PayloadTransferSize is NULL and
> + PayloadBufferSize is non-zero.
> + @retval EFI_TIMEOUT A timeout occurred while waiting
> for the security
> + protocol command to execute.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +SecurityReceiveData (
> + IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
> + IN UINT32 MediaId,
> + IN UINT64 Timeout,
> + IN UINT8 SecurityProtocolId,
> + IN UINT16
> SecurityProtocolSpecificData,
> + IN UINTN PayloadBufferSize,
> + OUT VOID *PayloadBuffer,
> + OUT UINTN *PayloadTransferSize
> + )
> +{
> + OPAL_PEI_DEVICE *PeiDev;
> +
> + PeiDev = OPAL_PEI_DEVICE_FROM_THIS (This);
> + if (PeiDev == NULL) {
> + return EFI_DEVICE_ERROR;
> + }
> +
> + return PerformTrustedIo (
> + PeiDev,
> + OpalRecv,
> + SecurityProtocolId,
> + SecurityProtocolSpecificData,
> + PayloadBufferSize,
> + PayloadBuffer
> + );
> +}
> +
> +/**
> + Send a security protocol command to a device.
> +
> + The SendData function sends a security protocol command containing the
> payload
> + PayloadBuffer to the given MediaId. The security protocol command sent is
> + defined by SecurityProtocolId and contains the security protocol specific data
> + SecurityProtocolSpecificData. If the underlying protocol command requires a
> + specific padding for the command payload, the SendData function shall add
> padding
> + bytes to the command payload to satisfy the padding requirements.
> +
> + For devices supporting the SCSI command set, the security protocol
> command is sent
> + using the SECURITY PROTOCOL OUT command defined in SPC-4.
> +
> + For devices supporting the ATA command set, the security protocol
> command is sent
> + using one of the TRUSTED SEND commands defined in ATA8-ACS if
> PayloadBufferSize
> + is non-zero. If the PayloadBufferSize is zero, the security protocol command
> is
> + sent using the Trusted Non-Data command defined in ATA8-ACS.
> +
> + If PayloadBuffer is NULL and PayloadBufferSize is non-zero, the function shall
> + return EFI_INVALID_PARAMETER.
> +
> + If the given MediaId does not support security protocol commands, the
> function
> + shall return EFI_UNSUPPORTED. If there is no media in the device, the
> function
> + returns EFI_NO_MEDIA. If the MediaId is not the ID for the current media in
> the
> + device, the function returns EFI_MEDIA_CHANGED.
> +
> + If the security protocol fails to complete within the Timeout period, the
> function
> + shall return EFI_TIMEOUT.
> +
> + If the security protocol command completes without an error, the function
> shall return
> + EFI_SUCCESS. If the security protocol command completes with an error, the
> function
> + shall return EFI_DEVICE_ERROR.
> +
> + @param This Indicates a pointer to the calling
> context.
> + @param MediaId ID of the medium to receive
> data from.
> + @param Timeout The timeout, in 100ns units, to
> use for the execution
> + of the security protocol
> command. A Timeout value of 0
> + means that this function will wait
> indefinitely for the
> + security protocol command to
> execute. If Timeout is greater
> + than zero, then this function will
> return EFI_TIMEOUT
> + if the time required to execute
> the send data command
> + is greater than Timeout.
> + @param SecurityProtocolId The value of the "Security
> Protocol" parameter of
> + the security protocol command
> to be sent.
> + @param SecurityProtocolSpecificData The value of the "Security Protocol
> Specific" parameter
> + of the security protocol
> command to be sent.
> + @param PayloadBufferSize Size in bytes of the payload data
> buffer.
> + @param PayloadBuffer A pointer to a destination buffer
> to store the security
> + protocol command specific
> payload data for the security
> + protocol command.
> +
> + @retval EFI_SUCCESS The security protocol command
> completed successfully.
> + @retval EFI_UNSUPPORTED The given MediaId does not
> support security protocol commands.
> + @retval EFI_DEVICE_ERROR The security protocol command
> completed with an error.
> + @retval EFI_NO_MEDIA There is no media in the device.
> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
> current media.
> + @retval EFI_INVALID_PARAMETER The PayloadBuffer is NULL and
> PayloadBufferSize is non-zero.
> + @retval EFI_TIMEOUT A timeout occurred while waiting
> for the security
> + protocol command to execute.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +SecuritySendData (
> + IN EFI_STORAGE_SECURITY_COMMAND_PROTOCOL *This,
> + IN UINT32 MediaId,
> + IN UINT64 Timeout,
> + IN UINT8 SecurityProtocolId,
> + IN UINT16
> SecurityProtocolSpecificData,
> + IN UINTN PayloadBufferSize,
> + IN VOID *PayloadBuffer
> + )
> +{
> + OPAL_PEI_DEVICE *PeiDev;
> +
> + PeiDev = OPAL_PEI_DEVICE_FROM_THIS (This);
> + if (PeiDev == NULL) {
> + return EFI_DEVICE_ERROR;
> + }
> +
> + return PerformTrustedIo (
> + PeiDev,
> + OpalSend,
> + SecurityProtocolId,
> + SecurityProtocolSpecificData,
> + PayloadBufferSize,
> + PayloadBuffer
> + );
> +
> +}
> +
> +/**
> + Save/Restore RootPort configuration space.
> +
> + @param[in] DevInfoNvme Pointer to NVMe device info.
> + @param[in] SaveAction TRUE: Save, FALSE: Restore
> + @param[in,out] PcieConfBufferList Configuration space data buffer for
> save/restore
> +
> + @return PCIE base address of this RootPort
> +**/
> +UINTN
> +SaveRestoreRootportConfSpace (
> + IN OPAL_DEVICE_NVME *DevInfoNvme,
> + IN BOOLEAN SaveAction,
> + IN OUT UINT8 **PcieConfBufferList
> + )
> +{
> + UINTN RpBase;
> + UINTN Length;
> + OPAL_PCI_DEVICE *DevNode;
> + UINT8 *StorePcieConfData;
> + UINTN Index;
> +
> + Length = 0;
> + Index = 0;
> + RpBase = 0;
> +
> + while (sizeof (OPAL_DEVICE_NVME) + Length < DevInfoNvme->Length) {
> + DevNode = (OPAL_PCI_DEVICE *)((UINT8*)DevInfoNvme->PciBridgeNode
> + Length);
> + RpBase = PCI_LIB_ADDRESS (DevNode->Bus, DevNode->Device,
> DevNode->Function, 0x0);
> +
> + if (PcieConfBufferList != NULL) {
> + if (SaveAction) {
> + StorePcieConfData = (UINT8 *) AllocateZeroPool
> (OPAL_PCIE_ROOTPORT_SAVESIZE);
> + ASSERT (StorePcieConfData != NULL);
> + OpalPciRead (StorePcieConfData, RpBase,
> OPAL_PCIE_ROOTPORT_SAVESIZE);
> + PcieConfBufferList[Index] = StorePcieConfData;
> + } else {
> + // Skip PCIe Command & Status registers
> + StorePcieConfData = PcieConfBufferList[Index];
> + OpalPciWrite (RpBase, StorePcieConfData, 4);
> + OpalPciWrite (RpBase + 8, StorePcieConfData + 8,
> OPAL_PCIE_ROOTPORT_SAVESIZE - 8);
> +
> + FreePool (StorePcieConfData);
> + }
> + }
> +
> + Length += sizeof (OPAL_PCI_DEVICE);
> + Index ++;
> + }
> +
> + return RpBase;
> +}
> +
> +/**
> + Configure RootPort for downstream PCIe NAND devices.
> +
> + @param[in] RpBase - PCIe configuration space address of this
> RootPort
> + @param[in] BusNumber - Bus number
> + @param[in] MemoryBase - Memory base address
> + @param[in] MemoryLength - Memory size
> +
> +**/
> +VOID
> +ConfigureRootPortForPcieNand (
> + IN UINTN RpBase,
> + IN UINTN BusNumber,
> + IN UINT32 MemoryBase,
> + IN UINT32 MemoryLength
> + )
> +{
> + UINT32 MemoryLimit;
> +
> + DEBUG ((DEBUG_INFO, "ConfigureRootPortForPcieNand, BusNumber: %x,
> MemoryBase: %x, MemoryLength: %x\n",
> + BusNumber, MemoryBase, MemoryLength));
> +
> + if (MemoryLength == 0) {
> + MemoryLimit = MemoryBase;
> + } else {
> + MemoryLimit = MemoryBase + MemoryLength + 0xFFFFF; // 1M
> + }
> +
> + ///
> + /// Configue PCIE configuration space for RootPort
> + ///
> + PciWrite8 (RpBase + NVME_PCIE_BNUM + 1, (UINT8) BusNumber);
> // Secondary Bus Number registers
> + PciWrite8 (RpBase + NVME_PCIE_BNUM + 2, (UINT8) BusNumber);
> // Subordinate Bus Number registers
> + PciWrite8 (RpBase + NVME_PCIE_IOBL, 0xFF);
> // I/O Base registers
> + PciWrite8 (RpBase + NVME_PCIE_IOBL + 1, 0x00);
> // I/O Limit registers
> + PciWrite16 (RpBase + NVME_PCIE_MBL, (UINT16) RShiftU64
> ((UINTN)MemoryBase, 16)); // Memory Base register
> + PciWrite16 (RpBase + NVME_PCIE_MBL + 2, (UINT16) RShiftU64
> ((UINTN)MemoryLimit, 16)); // Memory Limit register
> + PciWrite16 (RpBase + NVME_PCIE_PMBL, 0xFFFF);
> // Prefetchable Memory Base registers
> + PciWrite16 (RpBase + NVME_PCIE_PMBL + 2, 0x0000);
> // Prefetchable Memory Limit registers
> + PciWrite32 (RpBase + NVME_PCIE_PMBU32, 0xFFFFFFFF);
> // Prefetchable Memory Upper Base registers
> + PciWrite32 (RpBase + NVME_PCIE_PMLU32, 0x00000000);
> // Prefetchable Memory Upper Limit registers
> +}
> +
> +/**
> +
> + The function returns whether or not the device is Opal Locked.
> + TRUE means that the device is partially or fully locked.
> + This will perform a Level 0 Discovery and parse the locking feature descriptor
> +
> + @param[in] OpalDev Opal object to determine if
> locked.
> + @param[out] BlockSidSupported Whether device support BlockSid
> feature.
> +
> +**/
> +BOOLEAN
> +IsOpalDeviceLocked(
> + OPAL_PEI_DEVICE *OpalDev,
> + BOOLEAN *BlockSidSupported
> + )
> +{
> + OPAL_SESSION Session;
> + OPAL_DISK_SUPPORT_ATTRIBUTE SupportedAttributes;
> + TCG_LOCKING_FEATURE_DESCRIPTOR LockingFeature;
> + UINT16 OpalBaseComId;
> + TCG_RESULT Ret;
> +
> + Session.Sscp = &OpalDev->Sscp;
> + Session.MediaId = 0;
> +
> + Ret = OpalGetSupportedAttributesInfo (&Session, &SupportedAttributes,
> &OpalBaseComId);
> + if (Ret != TcgResultSuccess) {
> + return FALSE;
> + }
> +
> + Session.OpalBaseComId = OpalBaseComId;
> + *BlockSidSupported = SupportedAttributes.BlockSid == 1 ? TRUE :
> FALSE;
> +
> + Ret = OpalGetLockingInfo(&Session, &LockingFeature);
> + if (Ret != TcgResultSuccess) {
> + return FALSE;
> + }
> +
> + return OpalDeviceLocked (&SupportedAttributes, &LockingFeature);
> +}
> +
> +/**
> + Unlock OPAL password for S3.
> +
> + @param[in] OpalDev Opal object to unlock.
> +
> +**/
> +VOID
> +UnlockOpalPassword (
> + IN OPAL_PEI_DEVICE *OpalDev
> + )
> +{
> + TCG_RESULT Result;
> + OPAL_SESSION Session;
> + BOOLEAN BlockSidSupport;
> + UINT32 PpStorageFlags;
> + BOOLEAN BlockSIDEnabled;
> +
> + BlockSidSupport = FALSE;
> + if (IsOpalDeviceLocked (OpalDev, &BlockSidSupport)) {
> + ZeroMem(&Session, sizeof (Session));
> + Session.Sscp = &OpalDev->Sscp;
> + Session.MediaId = 0;
> + Session.OpalBaseComId = OpalDev->Device->OpalBaseComId;
> +
> + Result = OpalUtilUpdateGlobalLockingRange (
> + &Session,
> + OpalDev->Device->Password,
> + OpalDev->Device->PasswordLength,
> + FALSE,
> + FALSE
> + );
> + DEBUG ((
> + DEBUG_INFO,
> + "%a() OpalUtilUpdateGlobalLockingRange() Result = 0x%x\n",
> + __FUNCTION__,
> + Result
> + ));
> + }
> +
> + PpStorageFlags = Tcg2PhysicalPresenceLibGetManagementFlags ();
> + if ((PpStorageFlags &
> TCG2_BIOS_STORAGE_MANAGEMENT_FLAG_ENABLE_BLOCK_SID) != 0) {
> + BlockSIDEnabled = TRUE;
> + } else {
> + BlockSIDEnabled = FALSE;
> + }
> + if (BlockSIDEnabled && BlockSidSupport) {
> + Result = OpalBlockSid (&Session, TRUE);
> + DEBUG ((
> + DEBUG_INFO,
> + "%a() OpalBlockSid() Result = 0x%x\n",
> + __FUNCTION__,
> + Result
> + ));
> + }
> +}
> +
> +/**
> + Unlock ATA OPAL password for S3.
> +
> +**/
> +VOID
> +UnlockOpalPasswordAta (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 *DevInfo;
> + OPAL_DEVICE_ATA TempDevInfoAta;
> + OPAL_DEVICE_ATA *DevInfoAta;
> + UINTN DevInfoLengthAta;
> + UINT8 Bus;
> + UINT8 Device;
> + UINT8 Function;
> + OPAL_PEI_DEVICE OpalDev;
> + UINT8 BaseClassCode;
> + UINT8 SubClassCode;
> + UINT8 SataCmdSt;
> + AHCI_CONTEXT AhciContext;
> + UINT32 AhciBar;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + //
> + // Get ATA OPAL device info from LockBox.
> + //
> + DevInfo = (UINT8 *) &TempDevInfoAta;
> + DevInfoLengthAta = sizeof (OPAL_DEVICE_ATA);
> + Status = RestoreLockBox (&mOpalDeviceAtaGuid, DevInfo,
> &DevInfoLengthAta);
> + if (Status == EFI_BUFFER_TOO_SMALL) {
> + DevInfo = AllocatePages (EFI_SIZE_TO_PAGES (DevInfoLengthAta));
> + if (DevInfo != NULL) {
> + Status = RestoreLockBox (&mOpalDeviceAtaGuid, DevInfo,
> &DevInfoLengthAta);
> + }
> + }
> + if (EFI_ERROR (Status) || (DevInfo == NULL)) {
> + return;
> + }
> +
> + for (DevInfoAta = (OPAL_DEVICE_ATA *) DevInfo;
> + (UINTN) DevInfoAta < ((UINTN) DevInfo + DevInfoLengthAta);
> + DevInfoAta = (OPAL_DEVICE_ATA *) ((UINTN) DevInfoAta +
> DevInfoAta->Length)) {
> + Bus = DevInfoAta->Device.Bus;
> + Device = DevInfoAta->Device.Device;
> + Function = DevInfoAta->Device.Function;
> +
> + SataCmdSt = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> PCI_COMMAND_OFFSET));
> + PciWrite8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> PCI_COMMAND_OFFSET), 0x6);
> +
> + BaseClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x0B));
> + SubClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x0A));
> + if ((BaseClassCode != PCI_CLASS_MASS_STORAGE) ||
> + ((SubClassCode != PCI_CLASS_MASS_STORAGE_SATADPA) &&
> (SubClassCode != PCI_CLASS_MASS_STORAGE_RAID))) {
> + DEBUG ((DEBUG_ERROR, "%a() ClassCode/SubClassCode are not
> supported\n", __FUNCTION__));
> + } else {
> + AhciBar = PciRead32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24));
> + PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24),
> DevInfoAta->BarAddr);
> +
> + ZeroMem (&AhciContext, sizeof (AHCI_CONTEXT));
> + AhciContext.AhciBar = DevInfoAta->BarAddr;
> + AhciAllocateResource (&AhciContext);
> + Status = AhciModeInitialize (&AhciContext, (UINT8)DevInfoAta->Port);
> + ASSERT_EFI_ERROR (Status);
> + if (EFI_ERROR (Status)) {
> + DEBUG ((DEBUG_ERROR, "%a() AhciModeInitialize() error,
> Status: %r\n", __FUNCTION__, Status));
> + }
> +
> + OpalDev.Signature = OPAL_PEI_DEVICE_SIGNATURE;
> + OpalDev.Sscp.ReceiveData = SecurityReceiveData;
> + OpalDev.Sscp.SendData = SecuritySendData;
> + OpalDev.DeviceType = OPAL_DEVICE_TYPE_ATA;
> + OpalDev.Device = (OPAL_DEVICE_COMMON *) DevInfoAta;
> + OpalDev.Context = &AhciContext;
> +
> + UnlockOpalPassword (&OpalDev);
> +
> + AhciFreeResource (&AhciContext);
> + PciWrite32 (PCI_LIB_ADDRESS (Bus, Device, Function, 0x24), AhciBar);
> + }
> + PciWrite8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> PCI_COMMAND_OFFSET), SataCmdSt);
> + }
> +
> + ZeroMem (DevInfo, DevInfoLengthAta);
> + if ((UINTN) DevInfo != (UINTN) &TempDevInfoAta) {
> + FreePages (DevInfo, EFI_SIZE_TO_PAGES (DevInfoLengthAta));
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Unlock NVMe OPAL password for S3.
> +
> +**/
> +VOID
> +UnlockOpalPasswordNvme (
> + VOID
> + )
> +{
> + EFI_STATUS Status;
> + UINT8 *DevInfo;
> + OPAL_DEVICE_NVME TempDevInfoNvme;
> + OPAL_DEVICE_NVME *DevInfoNvme;
> + UINTN DevInfoLengthNvme;
> + UINT8 Bus;
> + UINT8 Device;
> + UINT8 Function;
> + OPAL_PEI_DEVICE OpalDev;
> + UINT8 BaseClassCode;
> + UINT8 SubClassCode;
> + UINT8 ProgInt;
> + UINT8 NvmeCmdSt;
> + UINT8 *StorePcieConfDataList[16];
> + UINTN RpBase;
> + UINTN MemoryBase;
> + UINTN MemoryLength;
> + NVME_CONTEXT NvmeContext;
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter\n", __FUNCTION__));
> +
> + //
> + // Get NVMe OPAL device info from LockBox.
> + //
> + DevInfo = (UINT8 *) &TempDevInfoNvme;
> + DevInfoLengthNvme = sizeof (OPAL_DEVICE_NVME);
> + Status = RestoreLockBox (&mOpalDeviceNvmeGuid, DevInfo,
> &DevInfoLengthNvme);
> + if (Status == EFI_BUFFER_TOO_SMALL) {
> + DevInfo = AllocatePages (EFI_SIZE_TO_PAGES (DevInfoLengthNvme));
> + if (DevInfo != NULL) {
> + Status = RestoreLockBox (&mOpalDeviceNvmeGuid, DevInfo,
> &DevInfoLengthNvme);
> + }
> + }
> + if (EFI_ERROR (Status) || (DevInfo == NULL)) {
> + return;
> + }
> +
> + for (DevInfoNvme = (OPAL_DEVICE_NVME *) DevInfo;
> + (UINTN) DevInfoNvme < ((UINTN) DevInfo + DevInfoLengthNvme);
> + DevInfoNvme = (OPAL_DEVICE_NVME *) ((UINTN) DevInfoNvme +
> DevInfoNvme->Length)) {
> + Bus = DevInfoNvme->Device.Bus;
> + Device = DevInfoNvme->Device.Device;
> + Function = DevInfoNvme->Device.Function;
> +
> + RpBase = 0;
> + NvmeCmdSt = 0;
> +
> + ///
> + /// Save original RootPort configuration space to heap
> + ///
> + RpBase = SaveRestoreRootportConfSpace (
> + DevInfoNvme,
> + TRUE, // save
> + StorePcieConfDataList
> + );
> + MemoryBase = DevInfoNvme->BarAddr;
> + MemoryLength = 0;
> + ConfigureRootPortForPcieNand (RpBase, Bus, (UINT32) MemoryBase,
> (UINT32) MemoryLength);
> +
> + ///
> + /// Enable PCIE decode for RootPort
> + ///
> + NvmeCmdSt = PciRead8 (RpBase + NVME_PCIE_PCICMD);
> + PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0x6);
> +
> + BaseClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x0B));
> + SubClassCode = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x0A));
> + ProgInt = PciRead8 (PCI_LIB_ADDRESS (Bus, Device, Function,
> 0x09));
> + if ((BaseClassCode != PCI_CLASS_MASS_STORAGE) ||
> + (SubClassCode != PCI_CLASS_MASS_STORAGE_NVM) ||
> + (ProgInt != PCI_IF_NVMHCI)) {
> + DEBUG ((DEBUG_ERROR, "%a() ClassCode/SubClassCode/PI are not
> supported\n", __FUNCTION__));
> + } else {
> + ZeroMem (&NvmeContext, sizeof (NVME_CONTEXT));
> + NvmeContext.Nbar = DevInfoNvme->BarAddr;
> + NvmeContext.PciBase = PCI_LIB_ADDRESS (Bus, Device, Function, 0x0);
> + NvmeContext.NvmeInitWaitTime = 0;
> + NvmeContext.Nsid = DevInfoNvme->NvmeNamespaceId;
> + NvmeAllocateResource (&NvmeContext);
> + Status = NvmeControllerInit (&NvmeContext);
> +
> + OpalDev.Signature = OPAL_PEI_DEVICE_SIGNATURE;
> + OpalDev.Sscp.ReceiveData = SecurityReceiveData;
> + OpalDev.Sscp.SendData = SecuritySendData;
> + OpalDev.DeviceType = OPAL_DEVICE_TYPE_NVME;
> + OpalDev.Device = (OPAL_DEVICE_COMMON *) DevInfoNvme;
> + OpalDev.Context = &NvmeContext;
> +
> + UnlockOpalPassword (&OpalDev);
> +
> + Status = NvmeControllerExit (&NvmeContext);
> + NvmeFreeResource (&NvmeContext);
> + }
> +
> + ASSERT (RpBase != 0);
> + PciWrite8 (RpBase + NVME_PCIE_PCICMD, 0);
> + RpBase = SaveRestoreRootportConfSpace (
> + DevInfoNvme,
> + FALSE, // restore
> + StorePcieConfDataList
> + );
> + PciWrite8 (RpBase + NVME_PCIE_PCICMD, NvmeCmdSt);
> + }
> +
> + ZeroMem (DevInfo, DevInfoLengthNvme);
> + if ((UINTN) DevInfo != (UINTN) &TempDevInfoNvme) {
> + FreePages (DevInfo, EFI_SIZE_TO_PAGES (DevInfoLengthNvme));
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit\n", __FUNCTION__));
> +}
> +
> +/**
> + Unlock OPAL password for S3.
> +
> +**/
> +VOID
> +OpalPasswordS3 (
> + VOID
> + )
> +{
> + UnlockOpalPasswordAta ();
> + UnlockOpalPasswordNvme ();
> +}
> +
> +/**
> + Entry point of the notification callback function itself within the PEIM.
> + It is to unlock OPAL password for S3.
> +
> + @param PeiServices Indirect reference to the PEI Services Table.
> + @param NotifyDescriptor Address of the notification descriptor data
> structure.
> + @param Ppi Address of the PPI that was installed.
> +
> + @return Status of the notification.
> + The status code returned from this function is ignored.
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalPasswordEndOfPeiNotify(
> + IN EFI_PEI_SERVICES **PeiServices,
> + IN EFI_PEI_NOTIFY_DESCRIPTOR *NotifyDesc,
> + IN VOID *Ppi
> + )
> +{
> + EFI_STATUS Status;
> + EFI_BOOT_MODE BootMode;
> +
> + Status = PeiServicesGetBootMode (&BootMode);
> + ASSERT_EFI_ERROR (Status);
> + if (BootMode != BOOT_ON_S3_RESUME) {
> + return EFI_UNSUPPORTED;
> + }
> +
> + DEBUG ((DEBUG_INFO, "%a() - enter at S3 resume\n", __FUNCTION__));
> +
> + OpalPasswordS3 ();
> +
> + DEBUG ((DEBUG_INFO, "%a() - exit at S3 resume\n", __FUNCTION__));
> +
> + return EFI_SUCCESS;
> +}
> +
> +EFI_PEI_NOTIFY_DESCRIPTOR mOpalPasswordEndOfPeiNotifyDesc = {
> + (EFI_PEI_PPI_DESCRIPTOR_NOTIFY_CALLBACK |
> EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),
> + &gEfiEndOfPeiSignalPpiGuid,
> + OpalPasswordEndOfPeiNotify
> +};
> +
> +/**
> + Main entry for this module.
> +
> + @param FileHandle Handle of the file being invoked.
> + @param PeiServices Pointer to PEI Services table.
> +
> + @return Status from PeiServicesNotifyPpi.
> +
> +**/
> +EFI_STATUS
> +EFIAPI
> +OpalPasswordPeiInit (
> + IN EFI_PEI_FILE_HANDLE FileHandle,
> + IN CONST EFI_PEI_SERVICES **PeiServices
> + )
> +{
> + EFI_STATUS Status;
> +
> + Status = PeiServicesNotifyPpi (&mOpalPasswordEndOfPeiNotifyDesc);
> + ASSERT_EFI_ERROR (Status);
> + return Status;
> +}
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
> new file mode 100644
> index 000000000000..31aab37f5d91
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.h
> @@ -0,0 +1,133 @@
> +/** @file
> + Opal Password PEI driver which is used to unlock Opal Password for S3.
> +
> +Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +This program and the accompanying materials
> +are licensed and made available under the terms and conditions of the BSD
> License
> +which accompanies this distribution. The full text of the license may be found
> at
> +http://opensource.org/licenses/bsd-license.php
> +
> +THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS
> OR IMPLIED.
> +
> +**/
> +
> +#ifndef _OPAL_PASSWORD_PEI_H_
> +#define _OPAL_PASSWORD_PEI_H_
> +
> +#include <PiPei.h>
> +#include <IndustryStandard/Atapi.h>
> +#include <IndustryStandard/Pci.h>
> +
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/PciLib.h>
> +#include <Library/BaseLib.h>
> +#include <Library/BaseMemoryLib.h>
> +#include <Library/MemoryAllocationLib.h>
> +#include <Library/PeimEntryPoint.h>
> +#include <Library/PeiServicesLib.h>
> +#include <Library/HobLib.h>
> +#include <Library/TimerLib.h>
> +#include <Library/LockBoxLib.h>
> +#include <Library/TcgStorageOpalLib.h>
> +#include <Library/Tcg2PhysicalPresenceLib.h>
> +
> +#include <Protocol/StorageSecurityCommand.h>
> +
> +#include <Ppi/IoMmu.h>
> +
> +#include "OpalPasswordCommon.h"
> +#include "OpalAhciMode.h"
> +#include "OpalNvmeMode.h"
> +
> +//
> +// Time out Value for ATA pass through protocol
> +//
> +#define ATA_TIMEOUT 30000000
> +
> +//
> +// The payload Length of HDD related ATA commands
> +//
> +#define HDD_PAYLOAD 512
> +//
> +// According to ATA spec, the max Length of hdd password is 32 bytes
> +//
> +#define OPAL_PASSWORD_MAX_LENGTH 32
> +
> +#pragma pack(1)
> +
> +/**
> +* Opal I/O Type utilized by the Trusted IO callback
> +*
> +* The type indicates if the I/O is a send or receive
> +*/
> +typedef enum {
> + //
> + // I/O is a TCG Trusted Send command
> + //
> + OpalSend,
> +
> + //
> + // I/O is a TCG Trusted Receive command
> + //
> + OpalRecv
> +} OPAL_IO_TYPE;
> +
> +#define OPAL_PEI_DEVICE_SIGNATURE SIGNATURE_32 ('o', 'p', 'd', 's')
> +
> +typedef struct {
> + UINTN Signature;
> + EFI_STORAGE_SECURITY_COMMAND_PROTOCOL Sscp;
> + UINT8 DeviceType;
> + OPAL_DEVICE_COMMON *Device;
> + VOID *Context;
> +} OPAL_PEI_DEVICE;
> +
> +#define OPAL_PEI_DEVICE_FROM_THIS(a) CR (a, OPAL_PEI_DEVICE, Sscp,
> OPAL_PEI_DEVICE_SIGNATURE)
> +
> +#pragma pack()
> +
> +/**
> + Allocates pages that are suitable for an OperationBusMasterCommonBuffer
> or
> + OperationBusMasterCommonBuffer64 mapping.
> +
> + @param Pages The number of pages to allocate.
> + @param HostAddress A pointer to store the base system
> memory address of the
> + allocated range.
> + @param DeviceAddress The resulting map address for the bus
> master PCI controller to use to
> + access the hosts HostAddress.
> + @param Mapping A resulting value to pass to Unmap().
> +
> + @retval EFI_SUCCESS The requested memory pages were
> allocated.
> + @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal
> attribute bits are
> + MEMORY_WRITE_COMBINE and
> MEMORY_CACHED.
> + @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
> + @retval EFI_OUT_OF_RESOURCES The memory pages could not be
> allocated.
> +
> +**/
> +EFI_STATUS
> +IoMmuAllocateBuffer (
> + IN UINTN Pages,
> + OUT VOID **HostAddress,
> + OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
> + OUT VOID **Mapping
> + );
> +
> +/**
> + Frees memory that was allocated with AllocateBuffer().
> +
> + @param Pages The number of pages to free.
> + @param HostAddress The base system memory address of the
> allocated range.
> + @param Mapping The mapping value returned from Map().
> +
> +**/
> +VOID
> +IoMmuFreeBuffer (
> + IN UINTN Pages,
> + IN VOID *HostAddress,
> + IN VOID *Mapping
> + );
> +
> +#endif // _OPAL_PASSWORD_PEI_H_
> +
> diff --git a/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
> b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
> new file mode 100644
> index 000000000000..81c57c36d2aa
> --- /dev/null
> +++ b/SecurityPkg/Tcg/Opal/OpalPassword/OpalPasswordPei.inf
> @@ -0,0 +1,63 @@
> +## @file
> +# This is a Opal Password PEI driver.
> +#
> +# Copyright (c) 2016 - 2018, Intel Corporation. All rights reserved.<BR>
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD
> License
> +# which accompanies this distribution. The full text of the license may be found
> at
> +# http://opensource.org/licenses/bsd-license.php
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS"
> BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER
> EXPRESS OR IMPLIED.
> +#
> +##
> +
> +[Defines]
> + INF_VERSION = 0x00010005
> + BASE_NAME = OpalPasswordPei
> + FILE_GUID =
> DED60489-979C-4B5A-8EE4-4068B0CC38DC
> + MODULE_TYPE = PEIM
> + VERSION_STRING = 1.0
> + ENTRY_POINT = OpalPasswordPeiInit
> +
> +#
> +# The following information is for reference only and not required by the build
> tools.
> +#
> +# VALID_ARCHITECTURES = IA32 X64
> +#
> +
> +[Sources]
> + OpalPasswordPei.c
> + OpalPasswordPei.h
> + OpalPasswordCommon.h
> + OpalAhciMode.c
> + OpalAhciMode.h
> + OpalNvmeMode.c
> + OpalNvmeMode.h
> + OpalNvmeReg.h
> +
> +[Packages]
> + MdePkg/MdePkg.dec
> + SecurityPkg/SecurityPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> +
> +[LibraryClasses]
> + PeimEntryPoint
> + PeiServicesLib
> + DebugLib
> + IoLib
> + PciLib
> + BaseLib
> + BaseMemoryLib
> + MemoryAllocationLib
> + TimerLib
> + HobLib
> + LockBoxLib
> + TcgStorageOpalLib
> + Tcg2PhysicalPresenceLib
> +
> +[Ppis]
> + gEdkiiIoMmuPpiGuid ##
> SOMETIMES_CONSUMES
> + gEfiEndOfPeiSignalPpiGuid ## NOTIFY
> +
> +[Depex]
> + gEfiPeiMasterBootModePpiGuid
> --
> 2.7.0.windows.1
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2018-03-08 11:42 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-03-07 13:19 [PATCH V2 0/7] OpalPassword: New solution without SMM device code Star Zeng
2018-03-07 13:19 ` [PATCH V2 1/7] MdeModulePkg LockBoxLib: Support LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY Star Zeng
2018-03-07 13:19 ` [PATCH V2 2/7] SecurityPkg TcgStorageOpalLib: Make it be base type really Star Zeng
2018-03-07 13:19 ` [PATCH V2 3/7] SecurityPkg TcgStorageCoreLib: " Star Zeng
2018-03-07 13:19 ` [PATCH V2 4/7] SecurityPkg OpalPassword: Add solution without SMM device code Star Zeng
2018-03-08 11:44 ` Yao, Jiewen
2018-03-08 11:48 ` Zeng, Star
2018-03-07 13:19 ` [PATCH V2 5/7] SecurityPkg OpalPassword: Remove old solution Star Zeng
2018-03-07 13:19 ` [PATCH V2 6/7] SecurityPkg OpalPasswordSupportLib: Remove it Star Zeng
2018-03-07 13:19 ` [PATCH V2 7/7] SecurityPkg OpalPasswordExtraInfoVariable.h: " Star Zeng
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox