From: Thomas Abraham <thomas.abraham@arm.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
Daniil Egranov <daniil.egranov@arm.com>,
Thomas Abraham <thomas.abraham@arm.com>
Subject: [PATCH edk2-platforms v2 4/6] Platform/ARM/Sgi: add support for virtio block device
Date: Fri, 13 Apr 2018 00:17:41 +0530 [thread overview]
Message-ID: <1523558863-5427-5-git-send-email-thomas.abraham@arm.com> (raw)
In-Reply-To: <1523558863-5427-1-git-send-email-thomas.abraham@arm.com>
From: Daniil Egranov <daniil.egranov@arm.com>
Add the registration of the virtio block device.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Daniil Egranov <daniil.egranov@arm.com>
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
---
.../ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c | 18 ++++-
.../ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf | 1 +
.../ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c | 76 ++++++++++++++++++++++
3 files changed, 94 insertions(+), 1 deletion(-)
create mode 100644 Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c
diff --git a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c
index 2da768a..5d54f06 100644
--- a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c
+++ b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.c
@@ -15,11 +15,27 @@
#include <Library/DebugLib.h>
EFI_STATUS
+InitVirtioBlockIo (
+ IN EFI_HANDLE ImageHandle
+ );
+
+EFI_STATUS
EFIAPI
ArmSgiPkgEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
- return EFI_SUCCESS;
+ EFI_STATUS Status;
+
+ // Install Virtio Block IO.
+ if ( FeaturePcdGet (PcdVirtioSupported) == TRUE ) {
+ Status = InitVirtioBlockIo (ImageHandle);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "PlatformDxe: Failed to install Virtio Block IO\n"));
+ return Status;
+ }
+ }
+
+ return Status;
}
diff --git a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf
index 379d7f4..534947f 100644
--- a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf
+++ b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/PlatformDxe.inf
@@ -20,6 +20,7 @@
[Sources.common]
PlatformDxe.c
+ VirtioBlockIo.c
[Packages]
ArmPkg/ArmPkg.dec
diff --git a/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c
new file mode 100644
index 0000000..eb00225
--- /dev/null
+++ b/Platform/ARM/SgiPkg/Drivers/PlatformDxe/VirtioBlockIo.c
@@ -0,0 +1,76 @@
+/** @file
+
+ Copyright (c) 2018, ARM Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Library/VirtioMmioDeviceLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/DebugLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <SgiPlatform.h>
+
+#pragma pack (1)
+typedef struct {
+ VENDOR_DEVICE_PATH Vendor;
+ EFI_DEVICE_PATH_PROTOCOL End;
+} VIRTIO_BLK_DEVICE_PATH;
+#pragma pack ()
+
+STATIC VIRTIO_BLK_DEVICE_PATH mVirtioBlockDevicePath =
+{
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_VENDOR_DP,
+ {
+ (UINT8)( sizeof (VENDOR_DEVICE_PATH) ),
+ (UINT8)( (sizeof (VENDOR_DEVICE_PATH) ) >> 8)
+ }
+ },
+ EFI_CALLER_ID_GUID,
+ },
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ sizeof (EFI_DEVICE_PATH_PROTOCOL),
+ 0
+ }
+ }
+};
+
+/**
+ * Entrypoint for 'VirtioBlockIo' driver
+ */
+EFI_STATUS
+InitVirtioBlockIo (
+ IN EFI_HANDLE ImageHandle
+ )
+{
+ EFI_STATUS Status = 0;
+
+ Status = gBS->InstallProtocolInterface (&ImageHandle,
+ &gEfiDevicePathProtocolGuid, EFI_NATIVE_INTERFACE,
+ &mVirtioBlockDevicePath);
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Declare the Virtio BlockIo device
+ Status = VirtioMmioInstallDevice (SGI_EXP_SYSPH_VIRTIO_BLOCK_BASE, ImageHandle);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "PlatformDxe: Failed to install Virtio block device\n"));
+ }
+
+ return Status;
+}
--
2.7.4
next prev parent reply other threads:[~2018-04-12 18:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-12 18:47 [PATCH edk2-platforms v2 0/6] Platform/ARM/Sgi: Add Arm's SGI platform support Thomas Abraham
2018-04-12 18:47 ` [PATCH edk2-platforms v2 1/6] Platform/ARM/Sgi: Add Platform library implementation Thomas Abraham
2018-04-16 6:19 ` Ard Biesheuvel
2018-04-12 18:47 ` [PATCH edk2-platforms v2 2/6] Platform/ARM/Sgi: add NOR flash platform " Thomas Abraham
2018-04-16 6:21 ` Ard Biesheuvel
2018-04-12 18:47 ` [PATCH edk2-platforms v2 3/6] Platform/ARM/Sgi: add initial platform dxe driver implementation Thomas Abraham
2018-04-16 6:23 ` Ard Biesheuvel
2018-04-12 18:47 ` Thomas Abraham [this message]
2018-04-16 6:25 ` [PATCH edk2-platforms v2 4/6] Platform/ARM/Sgi: add support for virtio block device Ard Biesheuvel
2018-04-12 18:47 ` [PATCH edk2-platforms v2 5/6] Platform/ARM/Sgi: add the initial set of acpi tables Thomas Abraham
2018-04-16 6:31 ` Ard Biesheuvel
2018-04-12 18:47 ` [PATCH edk2-platforms v2 6/6] Platform/ARM/Sgi: add initial support for ARM SGI platform Thomas Abraham
2018-04-16 6:35 ` Ard Biesheuvel
2018-04-16 10:44 ` Ard Biesheuvel
2018-05-09 8:56 ` Thomas Abraham
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1523558863-5427-5-git-send-email-thomas.abraham@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox