* [PATCH 1/1] EmbeddedPkg: add DwMmcHcDxe driver
@ 2018-04-28 5:23 Haojian Zhuang
0 siblings, 0 replies; only message in thread
From: Haojian Zhuang @ 2018-04-28 5:23 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
DwMmcHcDxe driver is for Designware SD and MMMC controller.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
EmbeddedPkg/Drivers/DwMmcHcDxe/ComponentName.c | 214 ++
EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.c | 1351 +++++++++++++
EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.dec | 40 +
EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.h | 780 +++++++
EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.inf | 65 +
EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.c | 2571 ++++++++++++++++++++++++
EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.h | 636 ++++++
EmbeddedPkg/Drivers/DwMmcHcDxe/EmmcDevice.c | 976 +++++++++
EmbeddedPkg/Drivers/DwMmcHcDxe/SdDevice.c | 1051 ++++++++++
EmbeddedPkg/Include/Protocol/PlatformDwMmc.h | 79 +
10 files changed, 7763 insertions(+)
create mode 100644 EmbeddedPkg/Drivers/DwMmcHcDxe/ComponentName.c
create mode 100644 EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.c
create mode 100644 EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.dec
create mode 100644 EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.h
create mode 100644 EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.inf
create mode 100644 EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.c
create mode 100644 EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.h
create mode 100644 EmbeddedPkg/Drivers/DwMmcHcDxe/EmmcDevice.c
create mode 100644 EmbeddedPkg/Drivers/DwMmcHcDxe/SdDevice.c
create mode 100644 EmbeddedPkg/Include/Protocol/PlatformDwMmc.h
diff --git a/EmbeddedPkg/Drivers/DwMmcHcDxe/ComponentName.c b/EmbeddedPkg/Drivers/DwMmcHcDxe/ComponentName.c
new file mode 100644
index 000000000000..1edade69d091
--- /dev/null
+++ b/EmbeddedPkg/Drivers/DwMmcHcDxe/ComponentName.c
@@ -0,0 +1,214 @@
+/** @file
+ UEFI Component Name(2) protocol implementation for Designware SD/MMC host
+ controller driver.
+
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2018, Linaro Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DwMmcHcDxe.h"
+
+//
+// EFI Component Name Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME_PROTOCOL gDwMmcHcComponentName = {
+ DwMmcHcComponentNameGetDriverName,
+ DwMmcHcComponentNameGetControllerName,
+ "eng"
+};
+
+//
+// EFI Component Name 2 Protocol
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_COMPONENT_NAME2_PROTOCOL gDwMmcHcComponentName2 = {
+ (EFI_COMPONENT_NAME2_GET_DRIVER_NAME) DwMmcHcComponentNameGetDriverName,
+ (EFI_COMPONENT_NAME2_GET_CONTROLLER_NAME) DwMmcHcComponentNameGetControllerName,
+ "en"
+};
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mDwMmcHcDriverNameTable[] = {
+ { "eng;en", L"Designware Sd/Mmc Host Controller Driver" },
+ { NULL , NULL }
+};
+
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_UNICODE_STRING_TABLE mDwMmcHcControllerNameTable[] = {
+ { "eng;en", L"Designware Sd/Mmc Host Controller" },
+ { NULL , NULL }
+};
+
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ )
+{
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mDwMmcHcDriverNameTable,
+ DriverName,
+ (BOOLEAN)(This == &gDwMmcHcComponentName)
+ );
+}
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle, OPTIONAL
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ )
+{
+ EFI_STATUS Status;
+
+ if (Language == NULL || ControllerName == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // This is a device driver, so ChildHandle must be NULL.
+ //
+ if (ChildHandle != NULL) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // Make sure this driver is currently managing ControllerHandle
+ //
+ Status = EfiTestManagedDevice (
+ ControllerHandle,
+ gDwMmcHcDriverBinding.DriverBindingHandle,
+ &gEfiPciIoProtocolGuid
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return LookupUnicodeString2 (
+ Language,
+ This->SupportedLanguages,
+ mDwMmcHcControllerNameTable,
+ ControllerName,
+ (BOOLEAN)(This == &gDwMmcHcComponentName)
+ );
+}
diff --git a/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.c b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.c
new file mode 100644
index 000000000000..4dd5a301f58a
--- /dev/null
+++ b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.c
@@ -0,0 +1,1351 @@
+/** @file
+ This driver is used to manage Designware SD/MMC host controller.
+
+ It would expose EFI_SD_MMC_PASS_THRU_PROTOCOL for upper layer use.
+
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (C) 2016 Marvell International Ltd. All rigths reserved.<BR>
+ Copyright (C) 2018, Linaro Ltd. All rigths reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DwMmcHcDxe.h"
+
+//
+// Driver Global Variables
+//
+EFI_DRIVER_BINDING_PROTOCOL gDwMmcHcDriverBinding = {
+ DwMmcHcDriverBindingSupported,
+ DwMmcHcDriverBindingStart,
+ DwMmcHcDriverBindingStop,
+ 0x10,
+ NULL,
+ NULL
+};
+
+//
+// Template for Designware SD/MMC host controller private data.
+//
+DW_MMC_HC_PRIVATE_DATA gDwMmcHcTemplate = {
+ DW_MMC_HC_PRIVATE_SIGNATURE, // Signature
+ NULL, // ControllerHandle
+ NULL, // PciIo
+ { // PassThru
+ sizeof (UINT32),
+ DwMmcPassThruPassThru,
+ DwMmcPassThruGetNextSlot,
+ DwMmcPassThruBuildDevicePath,
+ DwMmcPassThruGetSlotNumber,
+ DwMmcPassThruResetDevice
+ },
+ NULL, // PlatformDwMmc
+ 0, // PciAttributes
+ 0, // PreviousSlot
+ NULL, // TimerEvent
+ NULL, // ConnectEvent
+ // Queue
+ INITIALIZE_LIST_HEAD_VARIABLE (gDwMmcHcTemplate.Queue),
+ { // Slot
+ {0, UnknownSlot, 0, 0, 0}
+ },
+ { // Capability
+ {0}
+ },
+ { // MaxCurrent
+ 0
+ },
+ 0 // ControllerVersion
+};
+
+SD_DEVICE_PATH mSdDpTemplate = {
+ {
+ MESSAGING_DEVICE_PATH,
+ MSG_SD_DP,
+ {
+ (UINT8) (sizeof (SD_DEVICE_PATH)),
+ (UINT8) ((sizeof (SD_DEVICE_PATH)) >> 8)
+ }
+ },
+ 0
+};
+
+EMMC_DEVICE_PATH mEmmcDpTemplate = {
+ {
+ MESSAGING_DEVICE_PATH,
+ MSG_EMMC_DP,
+ {
+ (UINT8) (sizeof (EMMC_DEVICE_PATH)),
+ (UINT8) ((sizeof (EMMC_DEVICE_PATH)) >> 8)
+ }
+ },
+ 0
+};
+
+//
+// Prioritized function list to detect card type.
+// User could add other card detection logic here.
+//
+CARD_TYPE_DETECT_ROUTINE mCardTypeDetectRoutineTable[] = {
+ EmmcIdentification,
+ SdCardIdentification,
+ NULL
+};
+
+/**
+ The entry point for SD host controller driver, used to install this driver on the ImageHandle.
+
+ @param[in] ImageHandle The firmware allocated handle for this driver image.
+ @param[in] SystemTable Pointer to the EFI system table.
+
+ @retval EFI_SUCCESS Driver loaded.
+ @retval other Driver not loaded.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeDwMmcHcDxe (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = EfiLibInstallDriverBindingComponentName2 (
+ ImageHandle,
+ SystemTable,
+ &gDwMmcHcDriverBinding,
+ ImageHandle,
+ &gDwMmcHcComponentName,
+ &gDwMmcHcComponentName2
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}
+
+/**
+ Call back function when the timer event is signaled.
+
+ @param[in] Event The Event this notify function registered to.
+ @param[in] Context Pointer to the context data registered to the
+ Event.
+
+**/
+VOID
+EFIAPI
+ProcessAsyncTaskList (
+ IN EFI_EVENT Event,
+ IN VOID* Context
+ )
+{
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ LIST_ENTRY *Link;
+ DW_MMC_HC_TRB *Trb;
+ EFI_STATUS Status;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+ BOOLEAN InfiniteWait;
+ EFI_EVENT TrbEvent;
+
+ Private = (DW_MMC_HC_PRIVATE_DATA *)Context;
+
+ //
+ // Check if the first entry in the async I/O queue is done or not.
+ //
+ Status = EFI_SUCCESS;
+ Trb = NULL;
+ Link = GetFirstNode (&Private->Queue);
+ if (!IsNull (&Private->Queue, Link)) {
+ Trb = DW_MMC_HC_TRB_FROM_THIS (Link);
+ if (!Private->Slot[Trb->Slot].MediaPresent) {
+ Status = EFI_NO_MEDIA;
+ goto Done;
+ }
+ if (!Trb->Started) {
+ //
+ // Check whether the cmd/data line is ready for transfer.
+ //
+ Status = DwMmcCheckTrbEnv (Private, Trb);
+ if (!EFI_ERROR (Status)) {
+ Trb->Started = TRUE;
+ Status = DwMmcExecTrb (Private, Trb);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+ } else {
+ goto Done;
+ }
+ }
+ Status = DwMmcCheckTrbResult (Private, Trb);
+ }
+
+Done:
+ if ((Trb != NULL) && (Status == EFI_NOT_READY)) {
+ Packet = Trb->Packet;
+ if (Packet->Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+ if ((!InfiniteWait) && (Trb->Timeout-- == 0)) {
+ RemoveEntryList (Link);
+ Trb->Packet->TransactionStatus = EFI_TIMEOUT;
+ TrbEvent = Trb->Event;
+ DwMmcFreeTrb (Trb);
+ DEBUG ((DEBUG_VERBOSE, "ProcessAsyncTaskList(): Signal Event %p EFI_TIMEOUT\n", TrbEvent));
+ gBS->SignalEvent (TrbEvent);
+ return;
+ }
+ }
+ if ((Trb != NULL) && (Status != EFI_NOT_READY)) {
+ RemoveEntryList (Link);
+ Trb->Packet->TransactionStatus = Status;
+ TrbEvent = Trb->Event;
+ DwMmcFreeTrb (Trb);
+ DEBUG ((DEBUG_VERBOSE, "ProcessAsyncTaskList(): Signal Event %p with %r\n", TrbEvent, Status));
+ gBS->SignalEvent (TrbEvent);
+ }
+ return;
+}
+
+/**
+ Sd removable device enumeration callback function when the timer event is signaled.
+
+ @param[in] Event The Event this notify function registered to.
+ @param[in] Context Pointer to the context data registered to the
+ Event.
+
+**/
+VOID
+EFIAPI
+DwMmcHcEnumerateDevice (
+ IN EFI_EVENT Event,
+ IN VOID* Context
+ )
+{
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ EFI_STATUS Status;
+ UINT8 Slot;
+ BOOLEAN MediaPresent;
+ UINT32 RoutineNum;
+ CARD_TYPE_DETECT_ROUTINE *Routine;
+ UINTN Index;
+ LIST_ENTRY *Link;
+ LIST_ENTRY *NextLink;
+ DW_MMC_HC_TRB *Trb;
+ EFI_TPL OldTpl;
+
+return;
+ Private = (DW_MMC_HC_PRIVATE_DATA *)Context;
+
+ for (Slot = 0; Slot < DW_MMC_HC_MAX_SLOT; Slot++) {
+ if ((Private->Slot[Slot].Enable) && (Private->Slot[Slot].SlotType == RemovableSlot)) {
+ Status = DwMmcHcCardDetect (Private->PciIo, Private->ControllerHandle, Slot, &MediaPresent);
+ if ((Status == EFI_MEDIA_CHANGED) && !MediaPresent) {
+ DEBUG ((DEBUG_INFO, "DwMmcHcEnumerateDevice: device disconnected at slot %d of pci %p\n", Slot, Private->PciIo));
+ Private->Slot[Slot].MediaPresent = FALSE;
+ //
+ // Signal all async task events at the slot with EFI_NO_MEDIA status.
+ //
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+ for (Link = GetFirstNode (&Private->Queue);
+ !IsNull (&Private->Queue, Link);
+ Link = NextLink) {
+ NextLink = GetNextNode (&Private->Queue, Link);
+ Trb = DW_MMC_HC_TRB_FROM_THIS (Link);
+ if (Trb->Slot == Slot) {
+ RemoveEntryList (Link);
+ Trb->Packet->TransactionStatus = EFI_NO_MEDIA;
+ gBS->SignalEvent (Trb->Event);
+ DwMmcFreeTrb (Trb);
+ }
+ }
+ gBS->RestoreTPL (OldTpl);
+ //
+ // Notify the upper layer the connect state change through ReinstallProtocolInterface.
+ //
+ gBS->ReinstallProtocolInterface (
+ Private->ControllerHandle,
+ &gEfiSdMmcPassThruProtocolGuid,
+ &Private->PassThru,
+ &Private->PassThru
+ );
+ }
+ if ((Status == EFI_MEDIA_CHANGED) && MediaPresent) {
+ DEBUG ((DEBUG_INFO, "DwMmcHcEnumerateDevice: device connected at slot %d of pci %p\n", Slot, Private->PciIo));
+ //
+ // Initialize slot and start identification process for the new attached device
+ //
+ Status = DwMmcHcInitHost (Private->PciIo, Slot, Private->Capability[Slot]);
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+ //
+ // Reset the specified slot of the SD/MMC Pci Host Controller
+ //
+ Status = DwMmcHcReset (Private->PciIo, Slot, Private->Capability[Slot]);
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+
+ Private->Slot[Slot].MediaPresent = TRUE;
+ RoutineNum = sizeof (mCardTypeDetectRoutineTable) / sizeof (CARD_TYPE_DETECT_ROUTINE);
+ for (Index = 0; Index < RoutineNum; Index++) {
+ Routine = &mCardTypeDetectRoutineTable[Index];
+ if (*Routine != NULL) {
+ Status = (*Routine) (Private, Slot);
+ if (!EFI_ERROR (Status)) {
+ break;
+ }
+ }
+ }
+ //
+ // This card doesn't get initialized correctly.
+ //
+ if (Index == RoutineNum) {
+ }
+
+ //
+ // Notify the upper layer the connect state change through ReinstallProtocolInterface.
+ //
+ gBS->ReinstallProtocolInterface (
+ Private->ControllerHandle,
+ &gEfiSdMmcPassThruProtocolGuid,
+ &Private->PassThru,
+ &Private->PassThru
+ );
+ }
+ }
+ }
+
+ return;
+}
+
+/**
+ Reset the specified SD/MMC host controller and enable all interrupts.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The software reset executes successfully.
+ @retval Others The software reset fails.
+
+**/
+EFI_STATUS
+DwMmcHcReset (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ )
+{
+ EFI_STATUS Status;
+ UINT32 BlkSize;
+
+ //
+ // Enable all interrupt after reset all.
+ //
+ Status = DwMmcHcEnableInterrupt (PciIo, Slot);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "DwMmcHcReset: enable interrupts fail: %r\n", Status));
+ return Status;
+ }
+ Status = DwMmcHcInitTimeoutCtrl (PciIo, Slot);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ BlkSize = DW_MMC_BLOCK_SIZE;
+ Status = DwMmcHcRwMmio (PciIo, Slot, DW_MMC_BLKSIZ, FALSE, sizeof (BlkSize), &BlkSize);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "DwMmcHcReset: set block size fails: %r\n", Status));
+ return Status;
+ }
+
+ Status = DwMmcHcInitClockFreq (PciIo, Slot, Capability);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = DwMmcHcSetBusWidth (PciIo, Slot, FALSE, 1);
+
+ return Status;
+}
+
+/**
+ Tests to see if this driver supports a given controller. If a child device is provided,
+ it further tests to see if this driver supports creating a handle for the specified child device.
+
+ This function checks to see if the driver specified by This supports the device specified by
+ ControllerHandle. Drivers will typically use the device path attached to
+ ControllerHandle and/or the services from the bus I/O abstraction attached to
+ ControllerHandle to determine if the driver supports ControllerHandle. This function
+ may be called many times during platform initialization. In order to reduce boot times, the tests
+ performed by this function must be very small, and take as little time as possible to execute. This
+ function must not change the state of any hardware devices, and this function must be aware that the
+ device specified by ControllerHandle may already be managed by the same driver or a
+ different driver. This function must match its calls to AllocatePages() with FreePages(),
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+ Since ControllerHandle may have been previously started by the same driver, if a protocol is
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required
+ to guarantee the state of ControllerHandle is not modified by this function.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to test. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For bus drivers, if this parameter is not NULL, then
+ the bus driver must determine if the bus controller specified
+ by ControllerHandle and the child controller specified
+ by RemainingDevicePath are both supported by this
+ bus driver.
+
+ @retval EFI_SUCCESS The device specified by ControllerHandle and
+ RemainingDevicePath is supported by the driver specified by This.
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by the driver
+ specified by This.
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by a different
+ driver or an application that requires exclusive access.
+ Currently not implemented.
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
+ RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcDriverBindingSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ PCI_TYPE00 PciData;
+ PLATFORM_DW_MMC_PROTOCOL *PlatformDwMmc;
+
+ PciIo = NULL;
+ ParentDevicePath = NULL;
+
+ Status = gBS->LocateProtocol (
+ &gPlatformDwMmcProtocolGuid,
+ NULL,
+ (VOID **) &PlatformDwMmc
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ //
+ // SdPciHcDxe is a device driver, and should ingore the
+ // "RemainingDevicePath" according to EFI spec.
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ (VOID *) &ParentDevicePath,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ //
+ // EFI_ALREADY_STARTED is also an error.
+ //
+ return Status;
+ }
+ //
+ // Close the protocol because we don't use it here.
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiDevicePathProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ //
+ // Now test the EfiPciIoProtocol.
+ //
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Now further check the PCI header: Base class (offset 0x08) and
+ // Sub Class (offset 0x05). This controller should be an SD/MMC PCI
+ // Host Controller.
+ //
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint8,
+ 0,
+ sizeof (PciData),
+ &PciData
+ );
+ if (EFI_ERROR (Status)) {
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ return EFI_UNSUPPORTED;
+ }
+ //
+ // Since we already got the PciData, we can close protocol to avoid to carry it
+ // on for multiple exit points.
+ //
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ //
+ // Examine SD PCI Host Controller PCI Configuration table fields.
+ //
+ if ((PciData.Hdr.ClassCode[2] == PCI_CLASS_SYSTEM_PERIPHERAL) &&
+ (PciData.Hdr.ClassCode[1] == PCI_SUBCLASS_SD_HOST_CONTROLLER) &&
+ ((PciData.Hdr.ClassCode[0] == 0x00) || (PciData.Hdr.ClassCode[0] == 0x01))) {
+ return EFI_SUCCESS;
+ }
+
+ return EFI_UNSUPPORTED;
+}
+
+/**
+ Starts a device controller or a bus controller.
+
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().
+ As a result, much of the error checking on the parameters to Start() has been moved into this
+ common boot service. It is legal to call Start() from other locations,
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE.
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+ EFI_DEVICE_PATH_PROTOCOL.
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcDriverBindingStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ )
+{
+ EFI_STATUS Status;
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINT64 Supports;
+ UINT64 PciAttributes;
+ UINT8 Slot;
+ UINT8 Index;
+ CARD_TYPE_DETECT_ROUTINE *Routine;
+ UINT32 RoutineNum;
+ BOOLEAN Support64BitDma;
+ BOOLEAN MediaPresent;
+ PLATFORM_DW_MMC_PROTOCOL *PlatformDwMmc;
+
+ Status = gBS->LocateProtocol (
+ &gPlatformDwMmcProtocolGuid,
+ NULL,
+ (VOID **) &PlatformDwMmc
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Open PCI I/O Protocol and save pointer to open protocol
+ // in private data area.
+ //
+ PciIo = NULL;
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ (VOID **) &PciIo,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Enable the SD Host Controller MMIO space
+ //
+ Private = NULL;
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationGet,
+ 0,
+ &PciAttributes
+ );
+
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSupported,
+ 0,
+ &Supports
+ );
+
+ if (!EFI_ERROR (Status)) {
+ Supports &= (UINT64)EFI_PCI_DEVICE_ENABLE;
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationEnable,
+ Supports,
+ NULL
+ );
+ } else {
+ goto Done;
+ }
+
+ Private = AllocateCopyPool (sizeof (DW_MMC_HC_PRIVATE_DATA), &gDwMmcHcTemplate);
+ if (Private == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ Private->ControllerHandle = Controller;
+ Private->PciIo = PciIo;
+ Private->PciAttributes = PciAttributes;
+ Private->PlatformDwMmc = PlatformDwMmc;
+ InitializeListHead (&Private->Queue);
+
+ Support64BitDma = TRUE;
+
+ for (Slot = 0; Slot < DW_MMC_HC_MAX_SLOT; Slot++) {
+ Status = DwMmcHcGetCapability (PciIo, Controller, Slot, &Private->Capability[Slot]);
+ if (EFI_ERROR (Status)) {
+ break;
+ }
+
+ Support64BitDma &= Private->Capability[Slot].SysBus64;
+
+ if (Private->Capability[Slot].BaseClkFreq == 0) {
+ continue;
+ }
+
+ DumpCapabilityReg (Slot, &Private->Capability[Slot]);
+
+ MediaPresent = FALSE;
+ Status = DwMmcHcCardDetect (Private->PciIo, Controller, Slot, &MediaPresent);
+ if (MediaPresent == FALSE) {
+ continue;
+ }
+
+ //
+ // Initialize slot and start identification process for the new attached device
+ //
+ Status = DwMmcHcInitHost (PciIo, Slot, Private->Capability[Slot]);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Reset HC
+ //
+ Status = DwMmcHcReset (PciIo, Slot, Private->Capability[Slot]);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Private->Slot[Slot].CardType = Private->Capability[Slot].CardType;
+ Private->Slot[Slot].Enable = TRUE;
+ Private->Slot[Slot].MediaPresent = TRUE;
+
+ RoutineNum = sizeof (mCardTypeDetectRoutineTable) / sizeof (CARD_TYPE_DETECT_ROUTINE);
+ for (Index = 0; Index < RoutineNum; Index++) {
+ Routine = &mCardTypeDetectRoutineTable[Index];
+ if (*Routine != NULL) {
+ Status = (*Routine) (Private, Slot);
+ if (!EFI_ERROR (Status)) {
+ break;
+ }
+ }
+ }
+ }
+
+ //
+ // Enable 64-bit DMA support in the PCI layer if this controller
+ // supports it.
+ //
+ if (Support64BitDma) {
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationEnable,
+ EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE,
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_WARN, "DwMmcHcDriverBindingStart: failed to enable 64-bit DMA (%r)\n", Status));
+ }
+ }
+
+ //
+ // Start the asynchronous I/O monitor
+ //
+ Status = gBS->CreateEvent (
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,
+ TPL_NOTIFY,
+ ProcessAsyncTaskList,
+ Private,
+ &Private->TimerEvent
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = gBS->SetTimer (Private->TimerEvent, TimerPeriodic, DW_MMC_HC_ASYNC_TIMER);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ //
+ // Start the Sd removable device connection enumeration
+ //
+ Status = gBS->CreateEvent (
+ EVT_TIMER | EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ DwMmcHcEnumerateDevice,
+ Private,
+ &Private->ConnectEvent
+ );
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = gBS->SetTimer (Private->ConnectEvent, TimerPeriodic, DW_MMC_HC_ENUM_TIMER);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Controller,
+ &gEfiSdMmcPassThruProtocolGuid,
+ &(Private->PassThru),
+ NULL
+ );
+
+ DEBUG ((DEBUG_INFO, "DwMmcHcDriverBindingStart: %r End on %x\n", Status, Controller));
+
+Done:
+ if (EFI_ERROR (Status)) {
+ if ((Private != NULL) && (Private->PciAttributes != 0)) {
+ //
+ // Restore original PCI attributes
+ //
+ PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSet,
+ Private->PciAttributes,
+ NULL
+ );
+ }
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+
+ if ((Private != NULL) && (Private->TimerEvent != NULL)) {
+ gBS->CloseEvent (Private->TimerEvent);
+ }
+
+ if ((Private != NULL) && (Private->ConnectEvent != NULL)) {
+ gBS->CloseEvent (Private->ConnectEvent);
+ }
+
+ if (Private != NULL) {
+ FreePool (Private);
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Stops a device controller or a bus controller.
+
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+ As a result, much of the error checking on the parameters to Stop() has been moved
+ into this common boot service. It is legal to call Stop() from other locations,
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+ same driver's Start() function.
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+ Start() function, and the Start() function must have called OpenProtocol() on
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcDriverBindingStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ )
+{
+ EFI_STATUS Status;
+ EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru;
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ LIST_ENTRY *Link;
+ LIST_ENTRY *NextLink;
+ DW_MMC_HC_TRB *Trb;
+
+ DEBUG ((DEBUG_INFO, "DwMmcHcDriverBindingStop: Start\n"));
+
+ Status = gBS->OpenProtocol (
+ Controller,
+ &gEfiSdMmcPassThruProtocolGuid,
+ (VOID**) &PassThru,
+ This->DriverBindingHandle,
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Private = DW_MMC_HC_PRIVATE_FROM_THIS (PassThru);
+ //
+ // Close Non-Blocking timer and free Task list.
+ //
+ if (Private->TimerEvent != NULL) {
+ gBS->CloseEvent (Private->TimerEvent);
+ Private->TimerEvent = NULL;
+ }
+ if (Private->ConnectEvent != NULL) {
+ gBS->CloseEvent (Private->ConnectEvent);
+ Private->ConnectEvent = NULL;
+ }
+ //
+ // As the timer is closed, there is no needs to use TPL lock to
+ // protect the critical region "queue".
+ //
+ for (Link = GetFirstNode (&Private->Queue);
+ !IsNull (&Private->Queue, Link);
+ Link = NextLink) {
+ NextLink = GetNextNode (&Private->Queue, Link);
+ RemoveEntryList (Link);
+ Trb = DW_MMC_HC_TRB_FROM_THIS (Link);
+ Trb->Packet->TransactionStatus = EFI_ABORTED;
+ gBS->SignalEvent (Trb->Event);
+ DwMmcFreeTrb (Trb);
+ }
+
+ //
+ // Uninstall Block I/O protocol from the device handle
+ //
+ Status = gBS->UninstallProtocolInterface (
+ Controller,
+ &gEfiSdMmcPassThruProtocolGuid,
+ &(Private->PassThru)
+ );
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ Controller
+ );
+ //
+ // Restore original PCI attributes
+ //
+ PciIo = Private->PciIo;
+ Status = PciIo->Attributes (
+ PciIo,
+ EfiPciIoAttributeOperationSet,
+ Private->PciAttributes,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ FreePool (Private);
+
+ DEBUG ((DEBUG_INFO, "DwMmcHcDriverBindingStop: End with %r\n", Status));
+
+ return Status;
+}
+
+/**
+ Sends SD command to an SD card that is attached to the SD controller.
+
+ The PassThru() function sends the SD command specified by Packet to the SD card
+ specified by Slot.
+
+ If Packet is successfully sent to the SD card, then EFI_SUCCESS is returned.
+
+ If a device error occurs while sending the Packet, then EFI_DEVICE_ERROR is returned.
+
+ If Slot is not in a valid range for the SD controller, then EFI_INVALID_PARAMETER
+ is returned.
+
+ If Packet defines a data command but both InDataBuffer and OutDataBuffer are NULL,
+ EFI_INVALID_PARAMETER is returned.
+
+ @param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in,out] Packet A pointer to the SD command data structure.
+ @param[in] Event If Event is NULL, blocking I/O is performed. If Event is
+ not NULL, then nonblocking I/O is performed, and Event
+ will be signaled when the Packet completes.
+
+ @retval EFI_SUCCESS The SD Command Packet was sent by the host.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SD
+ command Packet.
+ @retval EFI_INVALID_PARAMETER Packet, Slot, or the contents of the Packet is invalid.
+ @retval EFI_INVALID_PARAMETER Packet defines a data command but both InDataBuffer and
+ OutDataBuffer are NULL.
+ @retval EFI_NO_MEDIA SD Device not present in the Slot.
+ @retval EFI_UNSUPPORTED The command described by the SD Command Packet is not
+ supported by the host controller.
+ @retval EFI_BAD_BUFFER_SIZE The InTransferLength or OutTransferLength exceeds the
+ limit supported by SD card ( i.e. if the number of bytes
+ exceed the Last LBA).
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruPassThru (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN UINT8 Slot,
+ IN OUT EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ DW_MMC_HC_TRB *Trb;
+ EFI_TPL OldTpl;
+
+ if ((This == NULL) || (Packet == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Packet->SdMmcCmdBlk == NULL) || (Packet->SdMmcStatusBlk == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Packet->OutDataBuffer == NULL) && (Packet->OutTransferLength != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Packet->InDataBuffer == NULL) && (Packet->InTransferLength != 0)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
+
+ if (!Private->Slot[Slot].Enable) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!Private->Slot[Slot].MediaPresent) {
+ return EFI_NO_MEDIA;
+ }
+
+ Trb = DwMmcCreateTrb (Private, Slot, Packet, Event);
+ if (Trb == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ //
+ // Immediately return for async I/O.
+ //
+ if (Event != NULL) {
+ return EFI_SUCCESS;
+ }
+
+ //
+ // Wait async I/O list is empty before execute sync I/O operation.
+ //
+ while (TRUE) {
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+ if (IsListEmpty (&Private->Queue)) {
+ gBS->RestoreTPL (OldTpl);
+ break;
+ }
+ gBS->RestoreTPL (OldTpl);
+ }
+
+ Status = DwMmcWaitTrbEnv (Private, Trb);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = DwMmcExecTrb (Private, Trb);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ Status = DwMmcWaitTrbResult (Private, Trb);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+Done:
+ if (Trb != NULL) {
+ DwMmcFreeTrb (Trb);
+ }
+
+ return Status;
+}
+
+/**
+ Used to retrieve next slot numbers supported by the SD controller. The function
+ returns information about all available slots (populated or not-populated).
+
+ The GetNextSlot() function retrieves the next slot number on an SD controller.
+ If on input Slot is 0xFF, then the slot number of the first slot on the SD controller
+ is returned.
+
+ If Slot is a slot number that was returned on a previous call to GetNextSlot(), then
+ the slot number of the next slot on the SD controller is returned.
+
+ If Slot is not 0xFF and Slot was not returned on a previous call to GetNextSlot(),
+ EFI_INVALID_PARAMETER is returned.
+
+ If Slot is the slot number of the last slot on the SD controller, then EFI_NOT_FOUND
+ is returned.
+
+ @param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
+ @param[in,out] Slot On input, a pointer to a slot number on the SD controller.
+ On output, a pointer to the next slot number on the SD controller.
+ An input value of 0xFF retrieves the first slot number on the SD
+ controller.
+
+ @retval EFI_SUCCESS The next slot number on the SD controller was returned in Slot.
+ @retval EFI_NOT_FOUND There are no more slots on this SD controller.
+ @retval EFI_INVALID_PARAMETER Slot is not 0xFF and Slot was not returned on a previous call
+ to GetNextSlot().
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruGetNextSlot (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 *Slot
+ )
+{
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ UINT8 Index;
+
+ if ((This == NULL) || (Slot == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
+
+ if (*Slot == 0xFF) {
+ for (Index = 0; Index < DW_MMC_HC_MAX_SLOT; Index++) {
+ if (Private->Slot[Index].Enable) {
+ *Slot = Index;
+ Private->PreviousSlot = Index;
+ return EFI_SUCCESS;
+ }
+ }
+ return EFI_NOT_FOUND;
+ } else if (*Slot == Private->PreviousSlot) {
+ for (Index = *Slot + 1; Index < DW_MMC_HC_MAX_SLOT; Index++) {
+ if (Private->Slot[Index].Enable) {
+ *Slot = Index;
+ Private->PreviousSlot = Index;
+ return EFI_SUCCESS;
+ }
+ }
+ return EFI_NOT_FOUND;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+}
+
+/**
+ Used to allocate and build a device path node for an SD card on the SD controller.
+
+ The BuildDevicePath() function allocates and builds a single device node for the SD
+ card specified by Slot.
+
+ If the SD card specified by Slot is not present on the SD controller, then EFI_NOT_FOUND
+ is returned.
+
+ If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned.
+
+ If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES
+ is returned.
+
+ Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
+ DevicePath are initialized to describe the SD card specified by Slot, and EFI_SUCCESS is
+ returned.
+
+ @param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot Specifies the slot number of the SD card for which a device
+ path node is to be allocated and built.
+ @param[in,out] DevicePath A pointer to a single device path node that describes the SD
+ card specified by Slot. This function is responsible for
+ allocating the buffer DevicePath with the boot service
+ AllocatePool(). It is the caller's responsibility to free
+ DevicePath when the caller is finished with DevicePath.
+
+ @retval EFI_SUCCESS The device path node that describes the SD card specified by
+ Slot was allocated and returned in DevicePath.
+ @retval EFI_NOT_FOUND The SD card specified by Slot does not exist on the SD controller.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruBuildDevicePath (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN UINT8 Slot,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ )
+{
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ SD_DEVICE_PATH *SdNode;
+ EMMC_DEVICE_PATH *EmmcNode;
+
+ if ((This == NULL) || (DevicePath == NULL) || (Slot >= DW_MMC_HC_MAX_SLOT)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
+
+ if ((!Private->Slot[Slot].Enable) || (!Private->Slot[Slot].MediaPresent)) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (Private->Slot[Slot].CardType == SdCardType) {
+ SdNode = AllocateCopyPool (sizeof (SD_DEVICE_PATH), &mSdDpTemplate);
+ if (SdNode == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ SdNode->SlotNumber = Slot;
+
+ *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) SdNode;
+ } else if (Private->Slot[Slot].CardType == EmmcCardType) {
+ EmmcNode = AllocateCopyPool (sizeof (EMMC_DEVICE_PATH), &mEmmcDpTemplate);
+ if (EmmcNode == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ EmmcNode->SlotNumber = Slot;
+
+ *DevicePath = (EFI_DEVICE_PATH_PROTOCOL *) EmmcNode;
+ } else {
+ //
+ // Currently we only support SD and EMMC two device nodes.
+ //
+ return EFI_NOT_FOUND;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function retrieves an SD card slot number based on the input device path.
+
+ The GetSlotNumber() function retrieves slot number for the SD card specified by
+ the DevicePath node. If DevicePath is NULL, EFI_INVALID_PARAMETER is returned.
+
+ If DevicePath is not a device path node type that the SD Pass Thru driver supports,
+ EFI_UNSUPPORTED is returned.
+
+ @param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] DevicePath A pointer to the device path node that describes a SD
+ card on the SD controller.
+ @param[out] Slot On return, points to the slot number of an SD card on
+ the SD controller.
+
+ @retval EFI_SUCCESS SD card slot number is returned in Slot.
+ @retval EFI_INVALID_PARAMETER Slot or DevicePath is NULL.
+ @retval EFI_UNSUPPORTED DevicePath is not a device path node type that the SD
+ Pass Thru driver supports.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruGetSlotNumber (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT8 *Slot
+ )
+{
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ SD_DEVICE_PATH *SdNode;
+ EMMC_DEVICE_PATH *EmmcNode;
+ UINT8 SlotNumber;
+
+ if ((This == NULL) || (DevicePath == NULL) || (Slot == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
+
+ //
+ // Check whether the DevicePath belongs to SD_DEVICE_PATH or EMMC_DEVICE_PATH
+ //
+ if ((DevicePath->Type != MESSAGING_DEVICE_PATH) ||
+ ((DevicePath->SubType != MSG_SD_DP) &&
+ (DevicePath->SubType != MSG_EMMC_DP)) ||
+ (DevicePathNodeLength(DevicePath) != sizeof(SD_DEVICE_PATH)) ||
+ (DevicePathNodeLength(DevicePath) != sizeof(EMMC_DEVICE_PATH))) {
+ return EFI_UNSUPPORTED;
+ }
+
+ if (DevicePath->SubType == MSG_SD_DP) {
+ SdNode = (SD_DEVICE_PATH *) DevicePath;
+ SlotNumber = SdNode->SlotNumber;
+ } else {
+ EmmcNode = (EMMC_DEVICE_PATH *) DevicePath;
+ SlotNumber = EmmcNode->SlotNumber;
+ }
+
+ if (SlotNumber >= DW_MMC_HC_MAX_SLOT) {
+ return EFI_NOT_FOUND;
+ }
+
+ if (Private->Slot[SlotNumber].Enable) {
+ *Slot = SlotNumber;
+ return EFI_SUCCESS;
+ } else {
+ return EFI_NOT_FOUND;
+ }
+}
+
+/**
+ Resets an SD card that is connected to the SD controller.
+
+ The ResetDevice() function resets the SD card specified by Slot.
+
+ If this SD controller does not support a device reset operation, EFI_UNSUPPORTED is
+ returned.
+
+ If Slot is not in a valid slot number for this SD controller, EFI_INVALID_PARAMETER
+ is returned.
+
+ If the device reset operation is completed, EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot Specifies the slot number of the SD card to be reset.
+
+ @retval EFI_SUCCESS The SD card specified by Slot was reset.
+ @retval EFI_UNSUPPORTED The SD controller does not support a device reset operation.
+ @retval EFI_INVALID_PARAMETER Slot number is invalid.
+ @retval EFI_NO_MEDIA SD Device not present in the Slot.
+ @retval EFI_DEVICE_ERROR The reset command failed due to a device error
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruResetDevice (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN UINT8 Slot
+ )
+{
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ LIST_ENTRY *Link;
+ LIST_ENTRY *NextLink;
+ DW_MMC_HC_TRB *Trb;
+ EFI_TPL OldTpl;
+
+ if (This == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Private = DW_MMC_HC_PRIVATE_FROM_THIS (This);
+
+ if (!Private->Slot[Slot].Enable) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (!Private->Slot[Slot].MediaPresent) {
+ return EFI_NO_MEDIA;
+ }
+
+ //
+ // Free all async I/O requests in the queue
+ //
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+
+ for (Link = GetFirstNode (&Private->Queue);
+ !IsNull (&Private->Queue, Link);
+ Link = NextLink) {
+ NextLink = GetNextNode (&Private->Queue, Link);
+ RemoveEntryList (Link);
+ Trb = DW_MMC_HC_TRB_FROM_THIS (Link);
+ Trb->Packet->TransactionStatus = EFI_ABORTED;
+ gBS->SignalEvent (Trb->Event);
+ DwMmcFreeTrb (Trb);
+ }
+
+ gBS->RestoreTPL (OldTpl);
+
+ return EFI_SUCCESS;
+}
diff --git a/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.dec b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.dec
new file mode 100644
index 000000000000..cf85ccb1a030
--- /dev/null
+++ b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.dec
@@ -0,0 +1,40 @@
+#/** @file
+# Framework Module Development Environment Industry Standards
+#
+# This Package provides headers and libraries that conform to EFI/PI Industry standards.
+# Copyright (c) 2007, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2012-2014, ARM Ltd. All rights reserved.<BR>
+# Copyright (c) 2018, Linaro. All rights reserved.<BR>
+#
+# This program and the accompanying materials are licensed and made available under
+# the terms and conditions of the BSD License which accompanies this distribution.
+# The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ DEC_SPECIFICATION = 0x00010019
+ PACKAGE_NAME = DwMmcHcDxePkg
+ PACKAGE_GUID = e73097ce-1fe2-41a6-a930-3136bc6d23ef
+ PACKAGE_VERSION = 0.1
+
+
+################################################################################
+#
+# Include Section - list of Include Paths that are provided by this package.
+# Comments are used for Keywords and Module Types.
+#
+# Supported Module Types:
+# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
+#
+################################################################################
+
+[Guids.common]
+ gDwMmcHcDxeTokenSpaceGuid = { 0x576c132e, 0x7d51, 0x4abb, { 0xbc, 0x60, 0x13, 0x08, 0x04, 0x0e, 0x90, 0x92 }}
+
+[Protocols.common]
+ gPlatformDwMmcProtocolGuid = { 0x1d6dfde5, 0x76a7, 0x4404, { 0x85, 0x74, 0x7a, 0xdf, 0x1a, 0x8a, 0xa2, 0x0d }}
diff --git a/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.h b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.h
new file mode 100644
index 000000000000..5eba6be10986
--- /dev/null
+++ b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.h
@@ -0,0 +1,780 @@
+/** @file
+
+ Provides some data structure definitions used by the Designware SD/MMC
+ host controller driver.
+
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+ Copyright (C) 2018, Linaro Ltd. All rigths reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _DW_MMC_HC_DXE_H_
+#define _DW_MMC_HC_DXE_H_
+
+#include <Uefi.h>
+
+#include <IndustryStandard/Emmc.h>
+#include <IndustryStandard/Pci.h>
+#include <IndustryStandard/Sd.h>
+
+#include <Library/ArmLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiDriverEntryPoint.h>
+#include <Library/UefiLib.h>
+
+#include <Protocol/ComponentName.h>
+#include <Protocol/ComponentName2.h>
+#include <Protocol/DevicePath.h>
+#include <Protocol/DriverBinding.h>
+#include <Protocol/PciIo.h>
+#include <Protocol/PlatformDwMmc.h>
+#include <Protocol/SdMmcPassThru.h>
+
+#include "DwMmcHci.h"
+
+extern EFI_COMPONENT_NAME_PROTOCOL gDwMmcHcComponentName;
+extern EFI_COMPONENT_NAME2_PROTOCOL gDwMmcHcComponentName2;
+extern EFI_DRIVER_BINDING_PROTOCOL gDwMmcHcDriverBinding;
+
+#define DW_MMC_HC_PRIVATE_SIGNATURE SIGNATURE_32 ('d', 'w', 's', 'd')
+
+#define DW_MMC_HC_PRIVATE_FROM_THIS(a) \
+ CR(a, DW_MMC_HC_PRIVATE_DATA, PassThru, DW_MMC_HC_PRIVATE_SIGNATURE)
+
+//
+// Generic time out value, 1 microsecond as unit.
+//
+#define DW_MMC_HC_GENERIC_TIMEOUT 1 * 1000 * 1000
+
+//
+// SD/MMC async transfer timer interval, set by experience.
+// The unit is 100us, takes 1ms as interval.
+//
+#define DW_MMC_HC_ASYNC_TIMER EFI_TIMER_PERIOD_MILLISECONDS(1)
+//
+// SD/MMC removable device enumeration timer interval, set by experience.
+// The unit is 100us, takes 100ms as interval.
+//
+#define DW_MMC_HC_ENUM_TIMER EFI_TIMER_PERIOD_MILLISECONDS(100)
+
+typedef struct {
+ BOOLEAN Enable;
+ EFI_SD_MMC_SLOT_TYPE SlotType;
+ BOOLEAN MediaPresent;
+ BOOLEAN Initialized;
+ SD_MMC_CARD_TYPE CardType;
+} DW_MMC_HC_SLOT;
+
+typedef struct {
+ UINTN Signature;
+
+ EFI_HANDLE ControllerHandle;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ EFI_SD_MMC_PASS_THRU_PROTOCOL PassThru;
+
+ PLATFORM_DW_MMC_PROTOCOL *PlatformDwMmc;
+
+ UINT64 PciAttributes;
+ //
+ // The field is used to record the previous slot in GetNextSlot().
+ //
+ UINT8 PreviousSlot;
+ //
+ // For Non-blocking operation.
+ //
+ EFI_EVENT TimerEvent;
+ //
+ // For Sd removable device enumeration.
+ //
+ EFI_EVENT ConnectEvent;
+ LIST_ENTRY Queue;
+
+ DW_MMC_HC_SLOT Slot[DW_MMC_HC_MAX_SLOT];
+ DW_MMC_HC_SLOT_CAP Capability[DW_MMC_HC_MAX_SLOT];
+ UINT64 MaxCurrent[DW_MMC_HC_MAX_SLOT];
+
+ UINT32 ControllerVersion;
+} DW_MMC_HC_PRIVATE_DATA;
+
+#define DW_MMC_HC_TRB_SIG SIGNATURE_32 ('D', 'T', 'R', 'B')
+
+//
+// TRB (Transfer Request Block) contains information for the cmd request.
+//
+typedef struct {
+ UINT32 Signature;
+ LIST_ENTRY TrbList;
+
+ UINT8 Slot;
+ UINT16 BlockSize;
+
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+ VOID *Data;
+ UINT32 DataLen;
+ BOOLEAN Read;
+ EFI_PHYSICAL_ADDRESS DataPhy;
+ VOID *DataMap;
+ DW_MMC_HC_TRANSFER_MODE Mode;
+
+ EFI_EVENT Event;
+ BOOLEAN Started;
+ UINT64 Timeout;
+
+ DW_MMC_HC_DMA_DESC_LINE *DmaDesc;
+ EFI_PHYSICAL_ADDRESS DmaDescPhy;
+ UINT32 DmaDescPages;
+ VOID *DmaMap;
+
+ BOOLEAN UseFifo;
+ BOOLEAN UseBE; // Big-endian
+
+ DW_MMC_HC_PRIVATE_DATA *Private;
+} DW_MMC_HC_TRB;
+
+#define DW_MMC_HC_TRB_FROM_THIS(a) \
+ CR(a, DW_MMC_HC_TRB, TrbList, DW_MMC_HC_TRB_SIG)
+
+//
+// Task for Non-blocking mode.
+//
+typedef struct {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+
+ UINT8 Slot;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+ BOOLEAN IsStart;
+ EFI_EVENT Event;
+ UINT64 RetryTimes;
+ BOOLEAN InfiniteWait;
+ VOID *Map;
+ VOID *MapAddress;
+} DW_MMC_HC_QUEUE;
+
+//
+// Prototypes
+//
+/**
+ Execute card identification procedure.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The card is identified correctly.
+ @retval Others The card can't be identified.
+
+**/
+typedef
+EFI_STATUS
+(*CARD_TYPE_DETECT_ROUTINE) (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN UINT8 Slot
+ );
+
+/**
+ Sends SD command to an SD card that is attached to the SD controller.
+
+ The PassThru() function sends the SD command specified by Packet to the SD card
+ specified by Slot.
+
+ If Packet is successfully sent to the SD card, then EFI_SUCCESS is returned.
+
+ If a device error occurs while sending the Packet, then EFI_DEVICE_ERROR is returned.
+
+ If Slot is not in a valid range for the SD controller, then EFI_INVALID_PARAMETER
+ is returned.
+
+ If Packet defines a data command but both InDataBuffer and OutDataBuffer are NULL,
+ EFI_INVALID_PARAMETER is returned.
+
+ @param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in,out] Packet A pointer to the SD command data structure.
+ @param[in] Event If Event is NULL, blocking I/O is performed. If Event is
+ not NULL, then nonblocking I/O is performed, and Event
+ will be signaled when the Packet completes.
+
+ @retval EFI_SUCCESS The SD Command Packet was sent by the host.
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SD
+ command Packet.
+ @retval EFI_INVALID_PARAMETER Packet, Slot, or the contents of the Packet is invalid.
+ @retval EFI_INVALID_PARAMETER Packet defines a data command but both InDataBuffer and
+ OutDataBuffer are NULL.
+ @retval EFI_NO_MEDIA SD Device not present in the Slot.
+ @retval EFI_UNSUPPORTED The command described by the SD Command Packet is not
+ supported by the host controller.
+ @retval EFI_BAD_BUFFER_SIZE The InTransferLength or OutTransferLength exceeds the
+ limit supported by SD card ( i.e. if the number of bytes
+ exceed the Last LBA).
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruPassThru (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN UINT8 Slot,
+ IN OUT EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
+ IN EFI_EVENT Event OPTIONAL
+ );
+
+/**
+ Used to retrieve next slot numbers supported by the SD controller. The function
+ returns information about all available slots (populated or not-populated).
+
+ The GetNextSlot() function retrieves the next slot number on an SD controller.
+ If on input Slot is 0xFF, then the slot number of the first slot on the SD controller
+ is returned.
+
+ If Slot is a slot number that was returned on a previous call to GetNextSlot(), then
+ the slot number of the next slot on the SD controller is returned.
+
+ If Slot is not 0xFF and Slot was not returned on a previous call to GetNextSlot(),
+ EFI_INVALID_PARAMETER is returned.
+
+ If Slot is the slot number of the last slot on the SD controller, then EFI_NOT_FOUND
+ is returned.
+
+ @param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
+ @param[in,out] Slot On input, a pointer to a slot number on the SD controller.
+ On output, a pointer to the next slot number on the SD controller.
+ An input value of 0xFF retrieves the first slot number on the SD
+ controller.
+
+ @retval EFI_SUCCESS The next slot number on the SD controller was returned in Slot.
+ @retval EFI_NOT_FOUND There are no more slots on this SD controller.
+ @retval EFI_INVALID_PARAMETER Slot is not 0xFF and Slot was not returned on a previous call
+ to GetNextSlot().
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruGetNextSlot (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN OUT UINT8 *Slot
+ );
+
+/**
+ Used to allocate and build a device path node for an SD card on the SD controller.
+
+ The BuildDevicePath() function allocates and builds a single device node for the SD
+ card specified by Slot.
+
+ If the SD card specified by Slot is not present on the SD controller, then EFI_NOT_FOUND
+ is returned.
+
+ If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned.
+
+ If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES
+ is returned.
+
+ Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
+ DevicePath are initialized to describe the SD card specified by Slot, and EFI_SUCCESS is
+ returned.
+
+ @param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot Specifies the slot number of the SD card for which a device
+ path node is to be allocated and built.
+ @param[in,out] DevicePath A pointer to a single device path node that describes the SD
+ card specified by Slot. This function is responsible for
+ allocating the buffer DevicePath with the boot service
+ AllocatePool(). It is the caller's responsibility to free
+ DevicePath when the caller is finished with DevicePath.
+
+ @retval EFI_SUCCESS The device path node that describes the SD card specified by
+ Slot was allocated and returned in DevicePath.
+ @retval EFI_NOT_FOUND The SD card specified by Slot does not exist on the SD controller.
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruBuildDevicePath (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN UINT8 Slot,
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
+ );
+
+/**
+ This function retrieves an SD card slot number based on the input device path.
+
+ The GetSlotNumber() function retrieves slot number for the SD card specified by
+ the DevicePath node. If DevicePath is NULL, EFI_INVALID_PARAMETER is returned.
+
+ If DevicePath is not a device path node type that the SD Pass Thru driver supports,
+ EFI_UNSUPPORTED is returned.
+
+ @param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] DevicePath A pointer to the device path node that describes a SD
+ card on the SD controller.
+ @param[out] Slot On return, points to the slot number of an SD card on
+ the SD controller.
+
+ @retval EFI_SUCCESS SD card slot number is returned in Slot.
+ @retval EFI_INVALID_PARAMETER Slot or DevicePath is NULL.
+ @retval EFI_UNSUPPORTED DevicePath is not a device path node type that the SD
+ Pass Thru driver supports.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruGetSlotNumber (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
+ OUT UINT8 *Slot
+ );
+
+/**
+ Resets an SD card that is connected to the SD controller.
+
+ The ResetDevice() function resets the SD card specified by Slot.
+
+ If this SD controller does not support a device reset operation, EFI_UNSUPPORTED is
+ returned.
+
+ If Slot is not in a valid slot number for this SD controller, EFI_INVALID_PARAMETER
+ is returned.
+
+ If the device reset operation is completed, EFI_SUCCESS is returned.
+
+ @param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot Specifies the slot number of the SD card to be reset.
+
+ @retval EFI_SUCCESS The SD card specified by Slot was reset.
+ @retval EFI_UNSUPPORTED The SD controller does not support a device reset operation.
+ @retval EFI_INVALID_PARAMETER Slot number is invalid.
+ @retval EFI_NO_MEDIA SD Device not present in the Slot.
+ @retval EFI_DEVICE_ERROR The reset command failed due to a device error
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcPassThruResetDevice (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
+ IN UINT8 Slot
+ );
+
+//
+// Driver model protocol interfaces
+//
+/**
+ Tests to see if this driver supports a given controller. If a child device is provided,
+ it further tests to see if this driver supports creating a handle for the specified child device.
+
+ This function checks to see if the driver specified by This supports the device specified by
+ ControllerHandle. Drivers will typically use the device path attached to
+ ControllerHandle and/or the services from the bus I/O abstraction attached to
+ ControllerHandle to determine if the driver supports ControllerHandle. This function
+ may be called many times during platform initialization. In order to reduce boot times, the tests
+ performed by this function must be very small, and take as little time as possible to execute. This
+ function must not change the state of any hardware devices, and this function must be aware that the
+ device specified by ControllerHandle may already be managed by the same driver or a
+ different driver. This function must match its calls to AllocatePages() with FreePages(),
+ AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
+ Since ControllerHandle may have been previously started by the same driver, if a protocol is
+ already in the opened state, then it must not be closed with CloseProtocol(). This is required
+ to guarantee the state of ControllerHandle is not modified by this function.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to test. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For bus drivers, if this parameter is not NULL, then
+ the bus driver must determine if the bus controller specified
+ by ControllerHandle and the child controller specified
+ by RemainingDevicePath are both supported by this
+ bus driver.
+
+ @retval EFI_SUCCESS The device specified by ControllerHandle and
+ RemainingDevicePath is supported by the driver specified by This.
+ @retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by the driver
+ specified by This.
+ @retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
+ RemainingDevicePath is already being managed by a different
+ driver or an application that requires exclusive access.
+ Currently not implemented.
+ @retval EFI_UNSUPPORTED The device specified by ControllerHandle and
+ RemainingDevicePath is not supported by the driver specified by This.
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcDriverBindingSupported (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+/**
+ Starts a device controller or a bus controller.
+
+ The Start() function is designed to be invoked from the EFI boot service ConnectController().
+ As a result, much of the error checking on the parameters to Start() has been moved into this
+ common boot service. It is legal to call Start() from other locations,
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE.
+ 2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
+ EFI_DEVICE_PATH_PROTOCOL.
+ 3. Prior to calling Start(), the Supported() function for the driver specified by This must
+ have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle The handle of the controller to start. This handle
+ must support a protocol interface that supplies
+ an I/O abstraction to the driver.
+ @param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
+ parameter is ignored by device drivers, and is optional for bus
+ drivers. For a bus driver, if this parameter is NULL, then handles
+ for all the children of Controller are created by this driver.
+ If this parameter is not NULL and the first Device Path Node is
+ not the End of Device Path Node, then only the handle for the
+ child device specified by the first Device Path Node of
+ RemainingDevicePath is created by this driver.
+ If the first Device Path Node of RemainingDevicePath is
+ the End of Device Path Node, no child handle is created by this
+ driver.
+
+ @retval EFI_SUCCESS The device was started.
+ @retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval Others The driver failded to start the device.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcDriverBindingStart (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
+ );
+
+/**
+ Stops a device controller or a bus controller.
+
+ The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
+ As a result, much of the error checking on the parameters to Stop() has been moved
+ into this common boot service. It is legal to call Stop() from other locations,
+ but the following calling restrictions must be followed or the system behavior will not be deterministic.
+ 1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
+ same driver's Start() function.
+ 2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
+ EFI_HANDLE. In addition, all of these handles must have been created in this driver's
+ Start() function, and the Start() function must have called OpenProtocol() on
+ ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
+
+ @param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
+ @param[in] ControllerHandle A handle to the device being stopped. The handle must
+ support a bus specific I/O protocol for the driver
+ to use to stop the device.
+ @param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
+ @param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
+ if NumberOfChildren is 0.
+
+ @retval EFI_SUCCESS The device was stopped.
+ @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcDriverBindingStop (
+ IN EFI_DRIVER_BINDING_PROTOCOL *This,
+ IN EFI_HANDLE Controller,
+ IN UINTN NumberOfChildren,
+ IN EFI_HANDLE *ChildHandleBuffer
+ );
+
+//
+// EFI Component Name Functions
+//
+/**
+ Retrieves a Unicode string that is the user readable name of the driver.
+
+ This function retrieves the user readable name of a driver in the form of a
+ Unicode string. If the driver specified by This has a user readable name in
+ the language specified by Language, then a pointer to the driver name is
+ returned in DriverName, and EFI_SUCCESS is returned. If the driver specified
+ by This does not support the language specified by Language,
+ then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified
+ in RFC 4646 or ISO 639-2 language code format.
+
+ @param DriverName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ driver specified by This in the language
+ specified by Language.
+
+ @retval EFI_SUCCESS The Unicode string for the Driver specified by
+ This and the language specified by Language was
+ returned in DriverName.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER DriverName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcComponentNameGetDriverName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN CHAR8 *Language,
+ OUT CHAR16 **DriverName
+ );
+
+/**
+ Retrieves a Unicode string that is the user readable name of the controller
+ that is being managed by a driver.
+
+ This function retrieves the user readable name of the controller specified by
+ ControllerHandle and ChildHandle in the form of a Unicode string. If the
+ driver specified by This has a user readable name in the language specified by
+ Language, then a pointer to the controller name is returned in ControllerName,
+ and EFI_SUCCESS is returned. If the driver specified by This is not currently
+ managing the controller specified by ControllerHandle and ChildHandle,
+ then EFI_UNSUPPORTED is returned. If the driver specified by This does not
+ support the language specified by Language, then EFI_UNSUPPORTED is returned.
+
+ @param This[in] A pointer to the EFI_COMPONENT_NAME2_PROTOCOL or
+ EFI_COMPONENT_NAME_PROTOCOL instance.
+
+ @param ControllerHandle[in] The handle of a controller that the driver
+ specified by This is managing. This handle
+ specifies the controller whose name is to be
+ returned.
+
+ @param ChildHandle[in] The handle of the child controller to retrieve
+ the name of. This is an optional parameter that
+ may be NULL. It will be NULL for device
+ drivers. It will also be NULL for a bus drivers
+ that wish to retrieve the name of the bus
+ controller. It will not be NULL for a bus
+ driver that wishes to retrieve the name of a
+ child controller.
+
+ @param Language[in] A pointer to a Null-terminated ASCII string
+ array indicating the language. This is the
+ language of the driver name that the caller is
+ requesting, and it must match one of the
+ languages specified in SupportedLanguages. The
+ number of languages supported by a driver is up
+ to the driver writer. Language is specified in
+ RFC 4646 or ISO 639-2 language code format.
+
+ @param ControllerName[out] A pointer to the Unicode string to return.
+ This Unicode string is the name of the
+ controller specified by ControllerHandle and
+ ChildHandle in the language specified by
+ Language from the point of view of the driver
+ specified by This.
+
+ @retval EFI_SUCCESS The Unicode string for the user readable name in
+ the language specified by Language for the
+ driver specified by This was returned in
+ DriverName.
+
+ @retval EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid
+ EFI_HANDLE.
+
+ @retval EFI_INVALID_PARAMETER Language is NULL.
+
+ @retval EFI_INVALID_PARAMETER ControllerName is NULL.
+
+ @retval EFI_UNSUPPORTED The driver specified by This is not currently
+ managing the controller specified by
+ ControllerHandle and ChildHandle.
+
+ @retval EFI_UNSUPPORTED The driver specified by This does not support
+ the language specified by Language.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcComponentNameGetControllerName (
+ IN EFI_COMPONENT_NAME_PROTOCOL *This,
+ IN EFI_HANDLE ControllerHandle,
+ IN EFI_HANDLE ChildHandle, OPTIONAL
+ IN CHAR8 *Language,
+ OUT CHAR16 **ControllerName
+ );
+
+/**
+ Create a new TRB for the SD/MMC cmd request.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Packet A pointer to the SD command data structure.
+ @param[in] Event If Event is NULL, blocking I/O is performed. If Event is
+ not NULL, then nonblocking I/O is performed, and Event
+ will be signaled when the Packet completes.
+
+ @return Created Trb or NULL.
+
+**/
+DW_MMC_HC_TRB *
+DwMmcCreateTrb (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN UINT8 Slot,
+ IN EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
+ IN EFI_EVENT Event
+ );
+
+/**
+ Free the resource used by the TRB.
+
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+**/
+VOID
+DwMmcFreeTrb (
+ IN DW_MMC_HC_TRB *Trb
+ );
+
+/**
+ Check if the env is ready for execute specified TRB.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The env is ready for TRB execution.
+ @retval EFI_NOT_READY The env is not ready for TRB execution.
+ @retval Others Some erros happen.
+
+**/
+EFI_STATUS
+DwMmcCheckTrbEnv (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ );
+
+/**
+ Wait for the env to be ready for execute specified TRB.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The env is ready for TRB execution.
+ @retval EFI_TIMEOUT The env is not ready for TRB execution in time.
+ @retval Others Some erros happen.
+
+**/
+EFI_STATUS
+DwMmcWaitTrbEnv (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ );
+
+/**
+ Execute the specified TRB.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The TRB is sent to host controller successfully.
+ @retval Others Some erros happen when sending this request to the host controller.
+
+**/
+EFI_STATUS
+DwMmcExecTrb (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ );
+
+/**
+ Check the TRB execution result.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The TRB is executed successfully.
+ @retval EFI_NOT_READY The TRB is not completed for execution.
+ @retval Others Some erros happen when executing this request.
+
+**/
+EFI_STATUS
+DwMmcCheckTrbResult (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ );
+
+/**
+ Wait for the TRB execution result.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The TRB is executed successfully.
+ @retval Others Some erros happen when executing this request.
+
+**/
+EFI_STATUS
+DwMmcWaitTrbResult (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ );
+
+/**
+ Execute EMMC device identification procedure.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS There is a EMMC card.
+ @retval Others There is not a EMMC card.
+
+**/
+EFI_STATUS
+EmmcIdentification (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN UINT8 Slot
+ );
+
+/**
+ Execute EMMC device identification procedure.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS There is a EMMC card.
+ @retval Others There is not a EMMC card.
+
+**/
+EFI_STATUS
+SdCardIdentification (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN UINT8 Slot
+ );
+
+#endif
diff --git a/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.inf b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.inf
new file mode 100644
index 000000000000..bf2d420f9b90
--- /dev/null
+++ b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.inf
@@ -0,0 +1,65 @@
+## @file
+# DwSdMmcHcDxe driver is used to manage those host controllers which comply with
+# Designware SD Host Controller.
+#
+# It will produce EFI_SD_MMC_PASS_THRU_PROTOCOL to allow sending SD/MMC/eMMC cmds
+# to specified devices from upper layer.
+#
+# Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+# Copyright (C) 2016, Marvell International Ltd. All rights reserved.<BR>
+# Copyright (c) 2018, Linaro Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+##
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = DwMmcHcDxe
+ MODULE_UNI_FILE = DwMmcHcDxe.uni
+ FILE_GUID = 9be4d260-208c-4efe-a524-0b5d3bf77f9d
+ MODULE_TYPE = UEFI_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InitializeDwMmcHcDxe
+
+[Sources]
+ ComponentName.c
+ DwMmcHcDxe.c
+ DwMmcHcDxe.h
+ DwMmcHci.c
+ DwMmcHci.h
+ EmmcDevice.c
+ SdDevice.c
+
+[Packages]
+ EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHcDxe.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ CacheMaintenanceLib
+ DebugLib
+ DevicePathLib
+ MemoryAllocationLib
+ TimerLib
+ UefiBootServicesTableLib
+ UefiDriverEntryPoint
+ UefiLib
+ UefiRuntimeServicesTableLib
+
+[Protocols]
+ gEfiDevicePathProtocolGuid ## TO_START
+ gEfiPciIoProtocolGuid ## TO_START
+ gEfiSdMmcPassThruProtocolGuid ## BY_START
+ gPlatformDwMmcProtocolGuid
+
+[UserExtensions.TianoCore."ExtraFiles"]
+ DwMmcHcDxeExtra.uni
diff --git a/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.c b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.c
new file mode 100644
index 000000000000..c73490796a8b
--- /dev/null
+++ b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.c
@@ -0,0 +1,2571 @@
+/** @file
+ This driver is used to manage Designware SD/MMC PCI host controllers.
+
+ It would expose EFI_SD_MMC_PASS_THRU_PROTOCOL for upper layer use.
+
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2018, Linaro Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DwMmcHcDxe.h"
+
+/**
+ Dump the content of SD/MMC host controller's Capability Register.
+
+ @param[in] Slot The slot number of the SD card to send the
+ command to.
+ @param[in] Capability The buffer to store the capability data.
+
+**/
+VOID
+DumpCapabilityReg (
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP *Capability
+ )
+{
+ //
+ // Dump Capability Data
+ //
+ DEBUG ((
+ DEBUG_INFO,
+ " == Slot [%d] Capability is 0x%x ==\n",
+ Slot,
+ Capability
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ " Base Clk Freq %dKHz\n",
+ Capability->BaseClkFreq
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ " BusWidth %d\n",
+ Capability->BusWidth
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ " HighSpeed Support %a\n",
+ Capability->HighSpeed ? "TRUE" : "FALSE"
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ " Voltage 1.8 %a\n",
+ Capability->Voltage18 ? "TRUE" : "FALSE"
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ " 64-bit Sys Bus %a\n",
+ Capability->SysBus64 ? "TRUE" : "FALSE"
+ ));
+ DEBUG ((DEBUG_INFO, " SlotType "));
+ if (Capability->SlotType == 0x00) {
+ DEBUG ((DEBUG_INFO, "%a\n", "Removable Slot"));
+ } else if (Capability->SlotType == 0x01) {
+ DEBUG ((DEBUG_INFO, "%a\n", "Embedded Slot"));
+ } else if (Capability->SlotType == 0x02) {
+ DEBUG ((DEBUG_INFO, "%a\n", "Shared Bus Slot"));
+ } else {
+ DEBUG ((DEBUG_INFO, "%a\n", "Reserved"));
+ }
+ DEBUG ((
+ DEBUG_INFO,
+ " SDR50 Support %a\n",
+ Capability->Sdr50 ? "TRUE" : "FALSE"
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ " SDR104 Support %a\n",
+ Capability->Sdr104 ? "TRUE" : "FALSE"
+ ));
+ DEBUG ((
+ DEBUG_INFO,
+ " DDR50 Support %a\n",
+ Capability->Ddr50 ? "TRUE" : "FALSE"
+ ));
+ return;
+}
+
+/**
+ Read SlotInfo register from SD/MMC host controller pci config space.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[out] FirstBar The buffer to store the first BAR value.
+ @param[out] SlotNum The buffer to store the supported slot number.
+
+ @retval EFI_SUCCESS The operation succeeds.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcGetSlotInfo (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ OUT UINT8 *FirstBar,
+ OUT UINT8 *SlotNum
+ )
+{
+ EFI_STATUS Status;
+ DW_MMC_HC_SLOT_INFO SlotInfo;
+
+ Status = PciIo->Pci.Read (
+ PciIo,
+ EfiPciIoWidthUint8,
+ DW_MMC_HC_SLOT_OFFSET,
+ sizeof (SlotInfo),
+ &SlotInfo
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ *FirstBar = SlotInfo.FirstBar;
+ *SlotNum = SlotInfo.SlotNum + 1;
+ ASSERT ((*FirstBar + *SlotNum) < DW_MMC_HC_MAX_SLOT);
+ return EFI_SUCCESS;
+}
+
+/**
+ Read/Write specified SD/MMC host controller mmio register.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] BarIndex The BAR index of the standard PCI Configuration
+ header to use as the base address for the memory
+ operation to perform.
+ @param[in] Offset The offset within the selected BAR to start the
+ memory operation.
+ @param[in] Read A boolean to indicate it's read or write
+ operation.
+ @param[in] Count The width of the mmio register in bytes.
+ Must be 1, 2 , 4 or 8 bytes.
+ @param[in, out] Data For read operations, the destination buffer to
+ store the results. For write operations, the
+ source buffer to write data from. The caller is
+ responsible for having ownership of the data
+ buffer and ensuring its size not less than
+ Count bytes.
+
+ @retval EFI_INVALID_PARAMETER The PciIo or Data is NULL or the Count is not
+ valid.
+ @retval EFI_SUCCESS The read/write operation succeeds.
+ @retval Others The read/write operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcRwMmio (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 BarIndex,
+ IN UINT32 Offset,
+ IN BOOLEAN Read,
+ IN UINT8 Count,
+ IN OUT VOID *Data
+ )
+{
+ EFI_STATUS Status;
+
+ if ((PciIo == NULL) || (Data == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Count != 4) && (Count != 8)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Since there's FIFO in Designware controller, map it to 32-bit word only.
+ //
+ Count = Count / sizeof (UINT32);
+ if (Read) {
+ Status = PciIo->Mem.Read (
+ PciIo,
+ EfiPciIoWidthUint32,
+ BarIndex,
+ (UINT64) Offset,
+ Count,
+ Data
+ );
+ } else {
+ Status = PciIo->Mem.Write (
+ PciIo,
+ EfiPciIoWidthUint32,
+ BarIndex,
+ (UINT64) Offset,
+ Count,
+ Data
+ );
+ }
+
+ return Status;
+}
+
+/**
+ Do OR operation with the value of the specified SD/MMC host controller mmio
+ register.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] BarIndex The BAR index of the standard PCI Configuration
+ header to use as the base address for the memory
+ operation to perform.
+ @param[in] Offset The offset within the selected BAR to start the
+ memory operation.
+ @param[in] Count The width of the mmio register in bytes.
+ Must be 1, 2 , 4 or 8 bytes.
+ @param[in] OrData The pointer to the data used to do OR operation.
+ The caller is responsible for having ownership of
+ the data buffer and ensuring its size not less
+ than Count bytes.
+
+ @retval EFI_INVALID_PARAMETER The PciIo or OrData is NULL or the Count is not
+ valid.
+ @retval EFI_SUCCESS The OR operation succeeds.
+ @retval Others The OR operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcOrMmio (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 BarIndex,
+ IN UINT32 Offset,
+ IN UINT8 Count,
+ IN VOID *OrData
+ )
+{
+ EFI_STATUS Status;
+ UINT64 Data;
+ UINT64 Or;
+
+ Status = DwMmcHcRwMmio (PciIo, BarIndex, Offset, TRUE, Count, &Data);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (Count == 1) {
+ Or = *(UINT8*) OrData;
+ } else if (Count == 2) {
+ Or = *(UINT16*) OrData;
+ } else if (Count == 4) {
+ Or = *(UINT32*) OrData;
+ } else if (Count == 8) {
+ Or = *(UINT64*) OrData;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Data |= Or;
+ Status = DwMmcHcRwMmio (PciIo, BarIndex, Offset, FALSE, Count, &Data);
+
+ return Status;
+}
+
+/**
+ Do AND operation with the value of the specified SD/MMC host controller mmio
+ register.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] BarIndex The BAR index of the standard PCI Configuration
+ header to use as the base address for the memory
+ operation to perform.
+ @param[in] Offset The offset within the selected BAR to start the
+ memory operation.
+ @param[in] Count The width of the mmio register in bytes.
+ Must be 1, 2 , 4 or 8 bytes.
+ @param[in] AndData The pointer to the data used to do AND operation.
+ The caller is responsible for having ownership of
+ the data buffer and ensuring its size not less
+ than Count bytes.
+
+ @retval EFI_INVALID_PARAMETER The PciIo or AndData is NULL or the Count is
+ not valid.
+ @retval EFI_SUCCESS The AND operation succeeds.
+ @retval Others The AND operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcAndMmio (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 BarIndex,
+ IN UINT32 Offset,
+ IN UINT8 Count,
+ IN VOID *AndData
+ )
+{
+ EFI_STATUS Status;
+ UINT64 Data;
+ UINT64 And;
+
+ Status = DwMmcHcRwMmio (PciIo, BarIndex, Offset, TRUE, Count, &Data);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if (Count == 1) {
+ And = *(UINT8*) AndData;
+ } else if (Count == 2) {
+ And = *(UINT16*) AndData;
+ } else if (Count == 4) {
+ And = *(UINT32*) AndData;
+ } else if (Count == 8) {
+ And = *(UINT64*) AndData;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Data &= And;
+ Status = DwMmcHcRwMmio (PciIo, BarIndex, Offset, FALSE, Count, &Data);
+
+ return Status;
+}
+
+/**
+ Wait for the value of the specified MMIO register set to the test value.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] BarIndex The BAR index of the standard PCI Configuration
+ header to use as the base address for the memory
+ operation to perform.
+ @param[in] Offset The offset within the selected BAR to start the
+ memory operation.
+ @param[in] Count The width of the mmio register in bytes.
+ Must be 1, 2, 4 or 8 bytes.
+ @param[in] MaskValue The mask value of memory.
+ @param[in] TestValue The test value of memory.
+
+ @retval EFI_NOT_READY The MMIO register hasn't set to the expected value.
+ @retval EFI_SUCCESS The MMIO register has expected value.
+ @retval Others The MMIO operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcCheckMmioSet (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 BarIndex,
+ IN UINT32 Offset,
+ IN UINT8 Count,
+ IN UINT64 MaskValue,
+ IN UINT64 TestValue
+ )
+{
+ EFI_STATUS Status;
+ UINT64 Value;
+
+ //
+ // Access PCI MMIO space to see if the value is the tested one.
+ //
+ Value = 0;
+ Status = DwMmcHcRwMmio (PciIo, BarIndex, Offset, TRUE, Count, &Value);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Value &= MaskValue;
+
+ if (Value == TestValue) {
+ return EFI_SUCCESS;
+ }
+
+ return EFI_NOT_READY;
+}
+
+/**
+ Wait for the value of the specified MMIO register set to the test value.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] BarIndex The BAR index of the standard PCI Configuration
+ header to use as the base address for the memory
+ operation to perform.
+ @param[in] Offset The offset within the selected BAR to start the
+ memory operation.
+ @param[in] Count The width of the mmio register in bytes.
+ Must be 1, 2, 4 or 8 bytes.
+ @param[in] MaskValue The mask value of memory.
+ @param[in] TestValue The test value of memory.
+ @param[in] Timeout The time out value for wait memory set, uses 1
+ microsecond as a unit.
+
+ @retval EFI_TIMEOUT The MMIO register hasn't expected value in timeout
+ range.
+ @retval EFI_SUCCESS The MMIO register has expected value.
+ @retval Others The MMIO operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcWaitMmioSet (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 BarIndex,
+ IN UINT32 Offset,
+ IN UINT8 Count,
+ IN UINT64 MaskValue,
+ IN UINT64 TestValue,
+ IN UINT64 Timeout
+ )
+{
+ EFI_STATUS Status;
+ BOOLEAN InfiniteWait;
+
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ while (InfiniteWait || (Timeout > 0)) {
+ Status = DwMmcHcCheckMmioSet (
+ PciIo,
+ BarIndex,
+ Offset,
+ Count,
+ MaskValue,
+ TestValue
+ );
+ if (Status != EFI_NOT_READY) {
+ return Status;
+ }
+
+ //
+ // Stall for 1 microsecond.
+ //
+ gBS->Stall (1);
+
+ Timeout--;
+ }
+
+ return EFI_TIMEOUT;
+}
+
+/**
+ Set all interrupt status bits in Normal and Error Interrupt Status Enable
+ register.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+
+ @retval EFI_SUCCESS The operation executes successfully.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+DwMmcHcEnableInterrupt (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot
+ )
+{
+ EFI_STATUS Status;
+ UINT32 IntStatus;
+ UINT32 IdIntEn;
+ UINT32 IdSts;
+
+ //
+ // Enable all bits in Interrupt Mask Register
+ //
+ IntStatus = 0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_INTMASK,
+ FALSE,
+ sizeof (IntStatus),
+ &IntStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Clear status in Interrupt Status Register
+ //
+ IntStatus = ~0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_RINTSTS,
+ FALSE,
+ sizeof (IntStatus),
+ &IntStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ IdIntEn = ~0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_IDINTEN,
+ FALSE,
+ sizeof (IdIntEn),
+ &IdIntEn
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "DwMmcHcReset: init dma interrupts fail: %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ IdSts = ~0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_IDSTS,
+ FALSE,
+ sizeof (IdSts),
+ &IdSts
+ );
+ return Status;
+}
+
+/**
+ Get the capability data from the specified slot.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the
+ command to.
+ @param[out] Capability The buffer to store the capability data.
+
+ @retval EFI_SUCCESS The operation executes successfully.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+DwMmcHcGetCapability (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_HANDLE Controller,
+ IN UINT8 Slot,
+ OUT DW_MMC_HC_SLOT_CAP *Capacity
+ )
+{
+ PLATFORM_DW_MMC_PROTOCOL *PlatformDwMmc;
+ EFI_STATUS Status;
+
+ if (Capacity == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = gBS->LocateProtocol (
+ &gPlatformDwMmcProtocolGuid,
+ NULL,
+ (VOID **) &PlatformDwMmc
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = PlatformDwMmc->GetCapability (Controller, Slot, Capacity);
+ return Status;
+}
+
+/**
+ Get the maximum current capability data from the specified slot.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the
+ command to.
+ @param[out] MaxCurrent The buffer to store the maximum current
+ capability data.
+
+ @retval EFI_SUCCESS The operation executes successfully.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+DwMmcHcGetMaxCurrent (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ OUT UINT64 *MaxCurrent
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Detect whether there is a SD/MMC card attached at the specified SD/MMC host
+ controller slot.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.1 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+ @param[out] MediaPresent The pointer to the media present boolean value.
+
+ @retval EFI_SUCCESS There is no media change happened.
+ @retval EFI_MEDIA_CHANGED There is media change happened.
+ @retval Others The detection fails.
+
+**/
+EFI_STATUS
+DwMmcHcCardDetect (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_HANDLE Controller,
+ IN UINT8 Slot,
+ OUT BOOLEAN *MediaPresent
+ )
+{
+ PLATFORM_DW_MMC_PROTOCOL *PlatformDwMmc;
+ EFI_STATUS Status;
+
+ if (MediaPresent == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = gBS->LocateProtocol (
+ &gPlatformDwMmcProtocolGuid,
+ NULL,
+ (VOID **) &PlatformDwMmc
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ *MediaPresent = PlatformDwMmc->CardDetect (Controller, Slot);
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+DwMmcHcUpdateClock (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Cmd;
+ UINT32 IntStatus;
+
+ Cmd = BIT_CMD_WAIT_PRVDATA_COMPLETE | BIT_CMD_UPDATE_CLOCK_ONLY |
+ BIT_CMD_START;
+ Status = DwMmcHcRwMmio (PciIo, Slot, DW_MMC_CMD, FALSE, sizeof (Cmd), &Cmd);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ while (1) {
+ Status = DwMmcHcRwMmio (PciIo, Slot, DW_MMC_CMD, TRUE, sizeof (Cmd), &Cmd);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if (!(Cmd & CMD_START_BIT)) {
+ break;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_RINTSTS,
+ TRUE,
+ sizeof (IntStatus),
+ &IntStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if (IntStatus & DW_MMC_INT_HLE) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "DwMmcHcUpdateClock: failed to update mmc clock frequency\n"
+ ));
+ return EFI_DEVICE_ERROR;
+ }
+ }
+ return EFI_SUCCESS;
+
+}
+
+/**
+ Stop SD/MMC card clock.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+
+ @retval EFI_SUCCESS Succeed to stop SD/MMC clock.
+ @retval Others Fail to stop SD/MMC clock.
+
+**/
+EFI_STATUS
+DwMmcHcStopClock (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot
+ )
+{
+ EFI_STATUS Status;
+ UINT32 ClkEna;
+
+ //
+ // Disable MMC clock first
+ //
+ ClkEna = 0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_CLKENA,
+ FALSE,
+ sizeof (ClkEna),
+ &ClkEna
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = DwMmcHcUpdateClock (PciIo, Slot);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return Status;
+}
+
+/**
+ SD/MMC card clock supply.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+ @param[in] ClockFreq The max clock frequency to be set. The unit is KHz.
+ @param[in] Capability The capability of the slot.
+
+ @retval EFI_SUCCESS The clock is supplied successfully.
+ @retval Others The clock isn't supplied successfully.
+
+**/
+EFI_STATUS
+DwMmcHcClockSupply (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN UINT64 ClockFreq,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ )
+{
+ EFI_STATUS Status;
+ UINT32 BaseClkFreq;
+ UINT32 SettingFreq;
+ UINT32 Divisor;
+ UINT32 Remainder;
+ UINT32 MmcStatus;
+ UINT32 ClkEna;
+ UINT32 ClkSrc;
+
+ //
+ // Calculate a divisor for SD clock frequency
+ //
+ ASSERT (Capability.BaseClkFreq != 0);
+
+ BaseClkFreq = Capability.BaseClkFreq;
+ if (ClockFreq == 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (ClockFreq > BaseClkFreq) {
+ ClockFreq = BaseClkFreq;
+ }
+
+ //
+ // Calculate the divisor of base frequency.
+ //
+ Divisor = 0;
+ SettingFreq = BaseClkFreq;
+ while (ClockFreq < SettingFreq) {
+ Divisor++;
+
+ SettingFreq = BaseClkFreq / (2 * Divisor);
+ Remainder = BaseClkFreq % (2 * Divisor);
+ if ((ClockFreq == SettingFreq) && (Remainder == 0)) {
+ break;
+ }
+ if ((ClockFreq == SettingFreq) && (Remainder != 0)) {
+ SettingFreq ++;
+ }
+ }
+
+ DEBUG ((
+ DEBUG_INFO,
+ "BaseClkFreq %dKHz Divisor %d ClockFreq %dKhz\n",
+ BaseClkFreq,
+ Divisor,
+ ClockFreq
+ ));
+
+ //
+ // Wait until MMC is idle
+ //
+ do {
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_STATUS,
+ TRUE,
+ sizeof (MmcStatus),
+ &MmcStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } while (MmcStatus & DW_MMC_STS_DATA_BUSY);
+
+ do {
+ Status = DwMmcHcStopClock (PciIo, Slot);
+ } while (EFI_ERROR (Status));
+
+ do {
+ ClkSrc = 0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_CLKSRC,
+ FALSE,
+ sizeof (ClkSrc),
+ &ClkSrc
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+ //
+ // Set clock divisor
+ //
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_CLKDIV,
+ FALSE,
+ sizeof (Divisor),
+ &Divisor
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+ //
+ // Enable MMC clock
+ //
+ ClkEna = 1;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_CLKENA,
+ FALSE,
+ sizeof (ClkEna),
+ &ClkEna
+ );
+ if (EFI_ERROR (Status)) {
+ continue;
+ }
+ Status = DwMmcHcUpdateClock (PciIo, Slot);
+ } while (EFI_ERROR (Status));
+
+ return EFI_SUCCESS;
+}
+
+/**
+ SD/MMC bus power control.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+ @param[in] PowerCtrl The value setting to the power control register.
+
+ @retval TRUE There is a SD/MMC card attached.
+ @retval FALSE There is no a SD/MMC card attached.
+
+**/
+EFI_STATUS
+DwMmcHcPowerControl (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN UINT8 PowerCtrl
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Set the SD/MMC bus width.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.4 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+ @param[in] BusWidth The bus width used by the SD/MMC device, it must be
+ 1, 4 or 8.
+
+ @retval EFI_SUCCESS The bus width is set successfully.
+ @retval Others The bus width isn't set successfully.
+
+**/
+EFI_STATUS
+DwMmcHcSetBusWidth (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN BOOLEAN IsDdr,
+ IN UINT16 BusWidth
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Ctype;
+ UINT32 Uhs;
+
+ switch (BusWidth) {
+ case 1:
+ Ctype = MMC_1BIT_MODE;
+ break;
+ case 4:
+ Ctype = MMC_4BIT_MODE;
+ break;
+ case 8:
+ Ctype = MMC_8BIT_MODE;
+ break;
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_CTYPE,
+ FALSE,
+ sizeof (Ctype),
+ &Ctype
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = DwMmcHcRwMmio (PciIo, Slot, DW_MMC_UHSREG, TRUE, sizeof (Uhs), &Uhs);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if (IsDdr) {
+ Uhs |= UHS_DDR_MODE;
+ } else {
+ Uhs &= ~(UHS_DDR_MODE);
+ }
+ Status = DwMmcHcRwMmio (PciIo, Slot, DW_MMC_UHSREG, FALSE, sizeof (Uhs), &Uhs);
+ return Status;
+}
+
+/**
+ Supply SD/MMC card with lowest clock frequency at initialization.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+ @param[in] Capability The capability of the slot.
+
+ @retval EFI_SUCCESS The clock is supplied successfully.
+ @retval Others The clock isn't supplied successfully.
+
+**/
+EFI_STATUS
+DwMmcHcInitClockFreq (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ )
+{
+ EFI_STATUS Status;
+ UINT32 InitFreq;
+
+ //
+ // Calculate a divisor for SD clock frequency
+ //
+ if (Capability.BaseClkFreq == 0) {
+ //
+ // Don't support get Base Clock Frequency information via another method
+ //
+ return EFI_UNSUPPORTED;
+ }
+ //
+ // Supply 400KHz clock frequency at initialization phase.
+ //
+ InitFreq = DWMMC_INIT_CLOCK_FREQ;
+ Status = DwMmcHcClockSupply (PciIo, Slot, InitFreq, Capability);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ MicroSecondDelay (100);
+ return Status;
+}
+
+/**
+ Supply SD/MMC card with maximum voltage at initialization.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+ @param[in] Capability The capability of the slot.
+
+ @retval EFI_SUCCESS The voltage is supplied successfully.
+ @retval Others The voltage isn't supplied successfully.
+
+**/
+EFI_STATUS
+DwMmcHcInitPowerVoltage (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Data;
+
+ Data = 0x1;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_PWREN,
+ FALSE,
+ sizeof (Data),
+ &Data
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "DwMmcHcInitPowerVoltage: enable power fails: %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ Data = DW_MMC_CTRL_RESET_ALL;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_CTRL,
+ FALSE,
+ sizeof (Data),
+ &Data
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "DwMmcHcInitPowerVoltage: reset fails: %r\n", Status));
+ return Status;
+ }
+ Status = DwMmcHcWaitMmioSet (
+ PciIo,
+ Slot,
+ DW_MMC_CTRL,
+ sizeof (Data),
+ DW_MMC_CTRL_RESET_ALL,
+ 0x00,
+ DW_MMC_HC_GENERIC_TIMEOUT
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_INFO,
+ "DwMmcHcInitPowerVoltage: reset done with %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ Data = DW_MMC_CTRL_INT_EN;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_CTRL,
+ FALSE,
+ sizeof (Data),
+ &Data
+ );
+ return Status;
+}
+
+/**
+ Initialize the Timeout Control register with most conservative value at
+ initialization.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 2.2.15 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+
+ @retval EFI_SUCCESS The timeout control register is configured
+ successfully.
+ @retval Others The timeout control register isn't configured
+ successfully.
+
+**/
+EFI_STATUS
+DwMmcHcInitTimeoutCtrl (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot
+ )
+{
+ EFI_STATUS Status;
+ UINT32 Data;
+
+ Data = ~0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_TMOUT,
+ FALSE,
+ sizeof (Data),
+ &Data
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "DwMmcHcInitTimeoutCtrl: set timeout fails: %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ Data = 0x00FFFFFF;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Slot,
+ DW_MMC_DEBNCE,
+ FALSE,
+ sizeof (Data),
+ &Data
+ );
+ return Status;
+}
+
+/**
+ Initial SD/MMC host controller with lowest clock frequency, max power and
+ max timeout value at initialization.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+ @param[in] Capability The capability of the slot.
+
+ @retval EFI_SUCCESS The host controller is initialized successfully.
+ @retval Others The host controller isn't initialized successfully.
+
+**/
+EFI_STATUS
+DwMmcHcInitHost (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ )
+{
+ EFI_STATUS Status;
+
+ Status = DwMmcHcInitPowerVoltage (PciIo, Slot, Capability);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return Status;
+}
+
+EFI_STATUS
+DwMmcHcStartDma (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINT32 Ctrl;
+ UINT32 Bmod;
+
+ PciIo = Trb->Private->PciIo;
+
+ //
+ // Reset DMA
+ //
+ Ctrl = DW_MMC_CTRL_DMA_RESET;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_CTRL,
+ FALSE,
+ sizeof (Ctrl),
+ &Ctrl
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "DwMmcHcStartDma: reset fails: %r\n", Status));
+ return Status;
+ }
+ Status = DwMmcHcWaitMmioSet (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_CTRL,
+ sizeof (Ctrl),
+ DW_MMC_CTRL_DMA_RESET,
+ 0x00,
+ DW_MMC_HC_GENERIC_TIMEOUT
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "DwMmcHcStartDma: reset done with %r\n", Status));
+ return Status;
+ }
+ Bmod = DW_MMC_IDMAC_SWRESET;
+ Status = DwMmcHcOrMmio (PciIo, Trb->Slot, DW_MMC_BMOD, sizeof (Bmod), &Bmod);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "DwMmcHcStartDma: set BMOD fail: %r\n", Status));
+ return Status;
+ }
+
+ //
+ // Select IDMAC
+ //
+ Ctrl = DW_MMC_CTRL_IDMAC_EN;
+ Status = DwMmcHcOrMmio (PciIo, Trb->Slot, DW_MMC_CTRL, sizeof (Ctrl), &Ctrl);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "DwMmcHcStartDma: init IDMAC fail: %r\n", Status));
+ return Status;
+ }
+
+ //
+ // Enable IDMAC
+ //
+ Bmod = DW_MMC_IDMAC_ENABLE | DW_MMC_IDMAC_FB;
+ Status = DwMmcHcOrMmio (PciIo, Trb->Slot, DW_MMC_BMOD, sizeof (Bmod), &Bmod);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "DwMmcHcReset: set BMOD failure: %r\n", Status));
+ return Status;
+ }
+ return Status;
+}
+
+EFI_STATUS
+DwMmcHcStopDma (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINT32 Ctrl;
+ UINT32 Bmod;
+
+ PciIo = Trb->Private->PciIo;
+
+ //
+ // Disable and reset IDMAC
+ //
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_CTRL,
+ TRUE,
+ sizeof (Ctrl),
+ &Ctrl
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Ctrl &= ~DW_MMC_CTRL_IDMAC_EN;
+ Ctrl |= DW_MMC_CTRL_DMA_RESET;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_CTRL,
+ FALSE,
+ sizeof (Ctrl),
+ &Ctrl
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ //
+ // Stop IDMAC
+ //
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_BMOD,
+ TRUE,
+ sizeof (Bmod),
+ &Bmod
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Bmod &= ~(DW_MMC_BMOD_FB | DW_MMC_BMOD_DE);
+ Bmod |= DW_MMC_BMOD_SWR;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_BMOD,
+ FALSE,
+ sizeof (Bmod),
+ &Bmod
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return Status;
+}
+
+/**
+ Build DMA descriptor table for transfer.
+
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The DMA descriptor table is created successfully.
+ @retval Others The DMA descriptor table isn't created successfully.
+
+**/
+EFI_STATUS
+BuildDmaDescTable (
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_PHYSICAL_ADDRESS Data;
+ UINT64 DataLen;
+ UINT64 Entries;
+ UINT32 Index;
+ UINT64 Remaining;
+ UINTN TableSize;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_STATUS Status;
+ UINTN Bytes;
+ UINTN Blocks;
+ DW_MMC_HC_DMA_DESC_LINE *DmaDesc;
+ UINT32 DmaDescPhy;
+ UINT32 Idsts;
+ UINT32 BytCnt;
+ UINT32 BlkSize;
+
+ Data = Trb->DataPhy;
+ DataLen = Trb->DataLen;
+ PciIo = Trb->Private->PciIo;
+ //
+ // Only support 32bit DMA Descriptor Table
+ //
+ if ((Data >= 0x100000000ul) || ((Data + DataLen) > 0x100000000ul)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ //
+ // Address field shall be set on 32-bit boundary (Lower 2-bit is always set
+ // to 0) for 32-bit address descriptor table.
+ //
+ if ((Data & (BIT0 | BIT1)) != 0) {
+ DEBUG ((
+ DEBUG_INFO,
+ "The buffer [0x%x] to construct DMA desc is not aligned to 4 bytes!\n",
+ Data
+ ));
+ }
+
+ Entries = (DataLen + DWMMC_DMA_BUF_SIZE - 1) / DWMMC_DMA_BUF_SIZE;
+ TableSize = Entries * sizeof (DW_MMC_HC_DMA_DESC_LINE);
+ Blocks = (DataLen + DW_MMC_BLOCK_SIZE - 1) / DW_MMC_BLOCK_SIZE;
+
+ Trb->DmaDescPages = (UINT32)EFI_SIZE_TO_PAGES (Entries * DWMMC_DMA_BUF_SIZE);
+ Status = PciIo->AllocateBuffer (
+ PciIo,
+ AllocateAnyPages,
+ EfiBootServicesData,
+ EFI_SIZE_TO_PAGES (TableSize),
+ (VOID **)&Trb->DmaDesc,
+ 0
+ );
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ ZeroMem (Trb->DmaDesc, TableSize);
+ Bytes = TableSize;
+ Status = PciIo->Map (
+ PciIo,
+ EfiPciIoOperationBusMasterCommonBuffer,
+ Trb->DmaDesc,
+ &Bytes,
+ &Trb->DmaDescPhy,
+ &Trb->DmaMap
+ );
+
+ if (EFI_ERROR (Status) || (Bytes != TableSize)) {
+ //
+ // Map error or unable to map the whole RFis buffer into a contiguous
+ // region.
+ //
+ PciIo->FreeBuffer (
+ PciIo,
+ EFI_SIZE_TO_PAGES (TableSize),
+ Trb->DmaDesc
+ );
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ if ((UINT64)(UINTN)Trb->DmaDescPhy > 0x100000000ul) {
+ //
+ // The DMA doesn't support 64bit addressing.
+ //
+ PciIo->Unmap (
+ PciIo,
+ Trb->DmaMap
+ );
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (DataLen < DW_MMC_BLOCK_SIZE) {
+ BlkSize = DataLen;
+ BytCnt = DataLen;
+ Remaining = DataLen;
+ } else {
+ BlkSize = DW_MMC_BLOCK_SIZE;
+ BytCnt = DW_MMC_BLOCK_SIZE * Blocks;
+ Remaining = DW_MMC_BLOCK_SIZE * Blocks;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_BLKSIZ,
+ FALSE,
+ sizeof (BlkSize),
+ &BlkSize
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "BuildDmaDescTable: set block size fails: %r\n",
+ Status
+ ));
+ return Status;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_BYTCNT,
+ FALSE,
+ sizeof (BytCnt),
+ &BytCnt
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ DmaDesc = Trb->DmaDesc;
+ for (Index = 0; Index < Entries; Index++, DmaDesc++) {
+ DmaDesc->Des0 = DW_MMC_IDMAC_DES0_OWN | DW_MMC_IDMAC_DES0_CH |
+ DW_MMC_IDMAC_DES0_DIC;
+ DmaDesc->Des1 = DW_MMC_IDMAC_DES1_BS1 (DWMMC_DMA_BUF_SIZE);
+ //
+ // Buffer Address
+ //
+ DmaDesc->Des2 = (UINT32)((UINTN)Trb->DataPhy +
+ (DWMMC_DMA_BUF_SIZE * Index));
+ //
+ // Next Descriptor Address
+ //
+ DmaDesc->Des3 = (UINT32)((UINTN)Trb->DmaDescPhy +
+ sizeof (DW_MMC_HC_DMA_DESC_LINE) * (Index + 1));
+ Remaining = Remaining - DWMMC_DMA_BUF_SIZE;
+ }
+ //
+ // First Descriptor
+ //
+ Trb->DmaDesc[0].Des0 |= DW_MMC_IDMAC_DES0_FS;
+ //
+ // Last Descriptor
+ //
+ Trb->DmaDesc[Entries - 1].Des0 &= ~(DW_MMC_IDMAC_DES0_CH |
+ DW_MMC_IDMAC_DES0_DIC);
+ Trb->DmaDesc[Entries - 1].Des0 |= DW_MMC_IDMAC_DES0_OWN |
+ DW_MMC_IDMAC_DES0_LD;
+ Trb->DmaDesc[Entries - 1].Des1 = DW_MMC_IDMAC_DES1_BS1 (Remaining +
+ DWMMC_DMA_BUF_SIZE);
+ //
+ // Set the next field of the Last Descriptor
+ //
+ Trb->DmaDesc[Entries - 1].Des3 = 0;
+ DmaDescPhy = (UINT32)Trb->DmaDescPhy;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_DBADDR,
+ FALSE,
+ sizeof (DmaDescPhy),
+ &DmaDescPhy
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ ArmDataSynchronizationBarrier ();
+ ArmInstructionSynchronizationBarrier ();
+ //
+ // Clear interrupts
+ //
+ Idsts = ~0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_IDSTS,
+ FALSE,
+ sizeof (Idsts),
+ &Idsts
+ );
+ return Status;
+}
+
+EFI_STATUS
+ReadFifo (
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINT32 Data;
+ UINT32 Received;
+ UINT32 Count;
+ UINT32 Intsts;
+ UINT32 Sts;
+ UINT32 FifoCount;
+ UINT32 Index; /* count with bytes */
+ UINT32 Ascending;
+ UINT32 Descending;
+
+ PciIo = Trb->Private->PciIo;
+ Received = 0;
+ Count = 0;
+ Index = 0;
+ Ascending = 0;
+ Descending = ((Trb->DataLen + 3) & ~3) - 4;
+ do {
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RINTSTS,
+ TRUE,
+ sizeof (Intsts),
+ &Intsts
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ReadFifo: failed to read RINTSTS, Status:%r\n",
+ Status
+ ));
+ return Status;
+ }
+ if (Trb->DataLen && ((Intsts & DW_MMC_INT_RXDR) ||
+ (Intsts & DW_MMC_INT_DTO))) {
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_STATUS,
+ TRUE,
+ sizeof (Sts),
+ &Sts
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ReadFifo: failed to read STATUS, Status:%r\n",
+ Status
+ ));
+ return Status;
+ }
+ //
+ // Convert to bytes
+ //
+ FifoCount = GET_STS_FIFO_COUNT (Sts) << 2;
+ if ((FifoCount == 0) && (Received < Trb->DataLen)) {
+ continue;
+ }
+ Index = 0;
+ Count = (MIN (FifoCount, Trb->DataLen) + 3) & ~3;
+ while (Index < Count) {
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_FIFO_START,
+ TRUE,
+ sizeof (Data),
+ &Data
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ReadFifo: failed to read FIFO, Status:%r\n",
+ Status
+ ));
+ return Status;
+ }
+ if (Trb->UseBE) {
+ *(UINT32 *)((UINTN)Trb->Data + Descending) = SwapBytes32 (Data);
+ Descending = Descending - 4;
+ } else {
+ *(UINT32 *)((UINTN)Trb->Data + Ascending) = Data;
+ Ascending += 4;
+ }
+ Index += 4;
+ Received += 4;
+ } /* while */
+ } /* if */
+ } while (((Intsts & DW_MMC_INT_CMD_DONE) == 0) || (Received < Trb->DataLen));
+ //
+ // Clear RINTSTS
+ //
+ Intsts = ~0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RINTSTS,
+ FALSE,
+ sizeof (Intsts),
+ &Intsts
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ReadFifo: failed to write RINTSTS, Status:%r\n",
+ Status
+ ));
+ return Status;
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Create a new TRB for the SD/MMC cmd request.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+ @param[in] Packet A pointer to the SD command data structure.
+ @param[in] Event If Event is NULL, blocking I/O is performed. If
+ Event is not NULL, then nonblocking I/O is
+ performed, and Event will be signaled when the
+ Packet completes.
+
+ @return Created Trb or NULL.
+
+**/
+DW_MMC_HC_TRB *
+DwMmcCreateTrb (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN UINT8 Slot,
+ IN EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
+ IN EFI_EVENT Event
+ )
+{
+ DW_MMC_HC_TRB *Trb;
+ EFI_STATUS Status;
+ EFI_TPL OldTpl;
+ EFI_PCI_IO_PROTOCOL_OPERATION Flag;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINTN MapLength;
+
+ Trb = AllocateZeroPool (sizeof (DW_MMC_HC_TRB));
+ if (Trb == NULL) {
+ return NULL;
+ }
+
+ Trb->Signature = DW_MMC_HC_TRB_SIG;
+ Trb->Slot = Slot;
+ Trb->BlockSize = 0x200;
+ Trb->Packet = Packet;
+ Trb->Event = Event;
+ Trb->Started = FALSE;
+ Trb->Timeout = Packet->Timeout;
+ Trb->Private = Private;
+
+ if ((Packet->InTransferLength != 0) && (Packet->InDataBuffer != NULL)) {
+ Trb->Data = Packet->InDataBuffer;
+ Trb->DataLen = Packet->InTransferLength;
+ Trb->Read = TRUE;
+ ZeroMem (Trb->Data, Trb->DataLen);
+ } else if (Packet->OutTransferLength && (Packet->OutDataBuffer != NULL)) {
+ Trb->Data = Packet->OutDataBuffer;
+ Trb->DataLen = Packet->OutTransferLength;
+ Trb->Read = FALSE;
+ } else if (!Packet->InTransferLength && !Packet->OutTransferLength) {
+ Trb->Data = NULL;
+ Trb->DataLen = 0;
+ } else {
+ goto Error;
+ }
+
+ if (((Private->Slot[Trb->Slot].CardType == EmmcCardType) &&
+ (Packet->SdMmcCmdBlk->CommandIndex == EMMC_SEND_TUNING_BLOCK)) ||
+ ((Private->Slot[Trb->Slot].CardType == SdCardType) &&
+ (Packet->SdMmcCmdBlk->CommandIndex == SD_SEND_TUNING_BLOCK))) {
+ Trb->Mode = SdMmcPioMode;
+ } else {
+ if (Trb->Read) {
+ Flag = EfiPciIoOperationBusMasterWrite;
+ } else {
+ Flag = EfiPciIoOperationBusMasterRead;
+ }
+
+ PciIo = Private->PciIo;
+ if (Private->Slot[Trb->Slot].CardType == SdCardType) {
+ Trb->UseFifo = TRUE;
+ } else {
+ Trb->UseFifo = FALSE;
+ if (Trb->DataLen) {
+ MapLength = Trb->DataLen;
+ Status = PciIo->Map (
+ PciIo,
+ Flag,
+ Trb->Data,
+ &MapLength,
+ &Trb->DataPhy,
+ &Trb->DataMap
+ );
+ if (EFI_ERROR (Status) || (Trb->DataLen != MapLength)) {
+ Status = EFI_BAD_BUFFER_SIZE;
+ goto Error;
+ }
+
+ Status = BuildDmaDescTable (Trb);
+ if (EFI_ERROR (Status)) {
+ PciIo->Unmap (PciIo, Trb->DataMap);
+ goto Error;
+ }
+ Status = DwMmcHcStartDma (Private, Trb);
+ if (EFI_ERROR (Status)) {
+ PciIo->Unmap (PciIo, Trb->DataMap);
+ goto Error;
+ }
+ }
+ }
+ } /* TuningBlock */
+
+ if (Event != NULL) {
+ OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
+ InsertTailList (&Private->Queue, &Trb->TrbList);
+ gBS->RestoreTPL (OldTpl);
+ }
+
+ return Trb;
+
+Error:
+ return NULL;
+}
+
+/**
+ Free the resource used by the TRB.
+
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+**/
+VOID
+DwMmcFreeTrb (
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = Trb->Private->PciIo;
+
+ if (Trb->DmaMap != NULL) {
+ PciIo->Unmap (
+ PciIo,
+ Trb->DmaMap
+ );
+ }
+ if (Trb->DataMap != NULL) {
+ PciIo->Unmap (
+ PciIo,
+ Trb->DataMap
+ );
+ }
+ FreePool (Trb);
+ return;
+}
+
+/**
+ Check if the env is ready for execute specified TRB.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The env is ready for TRB execution.
+ @retval EFI_NOT_READY The env is not ready for TRB execution.
+ @retval Others Some erros happen.
+
+**/
+EFI_STATUS
+DwMmcCheckTrbEnv (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Wait for the env to be ready for execute specified TRB.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The env is ready for TRB execution.
+ @retval EFI_TIMEOUT The env is not ready for TRB execution in time.
+ @retval Others Some erros happen.
+
+**/
+EFI_STATUS
+DwMmcWaitTrbEnv (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_STATUS Status;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+ UINT64 Timeout;
+ BOOLEAN InfiniteWait;
+
+ //
+ // Wait Command Complete Interrupt Status bit in Normal Interrupt Status
+ // Register
+ //
+ Packet = Trb->Packet;
+ Timeout = Packet->Timeout;
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ while (InfiniteWait || (Timeout > 0)) {
+ //
+ // Check Trb execution result by reading Normal Interrupt Status register.
+ //
+ Status = DwMmcCheckTrbEnv (Private, Trb);
+ if (Status != EFI_NOT_READY) {
+ return Status;
+ }
+ //
+ // Stall for 1 microsecond.
+ //
+ gBS->Stall (1);
+
+ Timeout--;
+ }
+
+ return EFI_TIMEOUT;
+}
+
+EFI_STATUS
+DwEmmcExecTrb (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_STATUS Status;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINT32 Cmd;
+ UINT32 MmcStatus;
+ UINT32 IntStatus;
+ UINT32 Argument;
+ UINT32 ErrMask;
+ UINT32 Timeout;
+
+ Packet = Trb->Packet;
+ PciIo = Trb->Private->PciIo;
+
+ ArmDataSynchronizationBarrier ();
+ ArmInstructionSynchronizationBarrier ();
+ //
+ // Wait until MMC is idle
+ //
+ do {
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_STATUS,
+ TRUE,
+ sizeof (MmcStatus),
+ &MmcStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } while (MmcStatus & DW_MMC_STS_DATA_BUSY);
+
+ IntStatus = ~0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RINTSTS,
+ FALSE,
+ sizeof (IntStatus),
+ &IntStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Cmd = CMD_INDEX (Packet->SdMmcCmdBlk->CommandIndex);
+ if ((Packet->SdMmcCmdBlk->CommandType == SdMmcCommandTypeAc) ||
+ (Packet->SdMmcCmdBlk->CommandType == SdMmcCommandTypeAdtc)) {
+ switch (Packet->SdMmcCmdBlk->CommandIndex) {
+ case EMMC_SET_RELATIVE_ADDR:
+ Cmd |= BIT_CMD_SEND_INIT;
+ break;
+ case EMMC_SEND_STATUS:
+ Cmd |= BIT_CMD_WAIT_PRVDATA_COMPLETE;
+ break;
+ case EMMC_STOP_TRANSMISSION:
+ Cmd |= BIT_CMD_STOP_ABORT_CMD;
+ break;
+ }
+ if (Packet->InTransferLength) {
+ Cmd |= BIT_CMD_WAIT_PRVDATA_COMPLETE | BIT_CMD_DATA_EXPECTED |
+ BIT_CMD_READ;
+ } else if (Packet->OutTransferLength) {
+ Cmd |= BIT_CMD_WAIT_PRVDATA_COMPLETE | BIT_CMD_DATA_EXPECTED |
+ BIT_CMD_WRITE;
+ }
+ Cmd |= BIT_CMD_RESPONSE_EXPECT | BIT_CMD_CHECK_RESPONSE_CRC;
+ } else {
+ switch (Packet->SdMmcCmdBlk->CommandIndex) {
+ case EMMC_GO_IDLE_STATE:
+ Cmd |= BIT_CMD_SEND_INIT;
+ break;
+ case EMMC_SEND_OP_COND:
+ Cmd |= BIT_CMD_RESPONSE_EXPECT;
+ break;
+ case EMMC_ALL_SEND_CID:
+ Cmd |= BIT_CMD_RESPONSE_EXPECT | BIT_CMD_LONG_RESPONSE |
+ BIT_CMD_CHECK_RESPONSE_CRC | BIT_CMD_SEND_INIT;
+ break;
+ }
+ }
+ switch (Packet->SdMmcCmdBlk->ResponseType) {
+ case SdMmcResponseTypeR2:
+ Cmd |= BIT_CMD_RESPONSE_EXPECT | BIT_CMD_CHECK_RESPONSE_CRC |
+ BIT_CMD_LONG_RESPONSE;
+ break;
+ case SdMmcResponseTypeR3:
+ Cmd |= BIT_CMD_RESPONSE_EXPECT;
+ break;
+ }
+ Cmd |= BIT_CMD_USE_HOLD_REG | BIT_CMD_START;
+
+ Argument = Packet->SdMmcCmdBlk->CommandArgument;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_CMDARG,
+ FALSE,
+ sizeof (Argument),
+ &Argument
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ ArmDataSynchronizationBarrier ();
+ ArmInstructionSynchronizationBarrier ();
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_CMD,
+ FALSE,
+ sizeof (Cmd),
+ &Cmd
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ ArmDataSynchronizationBarrier ();
+ ArmInstructionSynchronizationBarrier ();
+
+ ErrMask = DW_MMC_INT_EBE | DW_MMC_INT_HLE | DW_MMC_INT_RTO |
+ DW_MMC_INT_RCRC | DW_MMC_INT_RE;
+ ErrMask |= DW_MMC_INT_DCRC | DW_MMC_INT_DRT | DW_MMC_INT_SBE;
+ do {
+ Timeout = 10000;
+ if (--Timeout == 0) {
+ break;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RINTSTS,
+ TRUE,
+ sizeof (IntStatus),
+ &IntStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if (IntStatus & ErrMask) {
+ return EFI_DEVICE_ERROR;
+ }
+ if (Trb->DataLen && ((IntStatus & DW_MMC_INT_DTO) == 0)) {
+ //
+ // Transfer Not Done
+ //
+ MicroSecondDelay (10);
+ continue;
+ }
+ MicroSecondDelay (10);
+ } while (!(IntStatus & DW_MMC_INT_CMD_DONE));
+ switch (Packet->SdMmcCmdBlk->ResponseType) {
+ case SdMmcResponseTypeR1:
+ case SdMmcResponseTypeR1b:
+ case SdMmcResponseTypeR3:
+ case SdMmcResponseTypeR4:
+ case SdMmcResponseTypeR5:
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP0,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp0),
+ &Packet->SdMmcStatusBlk->Resp0
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ break;
+ case SdMmcResponseTypeR2:
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP0,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp0),
+ &Packet->SdMmcStatusBlk->Resp0
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP1,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp1),
+ &Packet->SdMmcStatusBlk->Resp1
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP2,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp2),
+ &Packet->SdMmcStatusBlk->Resp2
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP3,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp3),
+ &Packet->SdMmcStatusBlk->Resp3
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ break;
+ }
+
+ //
+ // The workaround on EMMC_SEND_CSD is used to be compatible with SDHC.
+ //
+ if (Packet->SdMmcCmdBlk->CommandIndex == EMMC_SEND_CSD) {
+ {
+ UINT32 Buf[4];
+ ZeroMem (Buf, sizeof (Buf));
+ CopyMem (
+ (UINT8 *)Buf,
+ (UINT8 *)&Packet->SdMmcStatusBlk->Resp0 + 1,
+ sizeof (Buf) - 1
+ );
+ CopyMem (
+ (UINT8 *)&Packet->SdMmcStatusBlk->Resp0,
+ (UINT8 *)Buf,
+ sizeof (Buf) - 1
+ );
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+DwSdExecTrb (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_STATUS Status;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINT32 Cmd;
+ UINT32 MmcStatus;
+ UINT32 IntStatus;
+ UINT32 Argument;
+ UINT32 ErrMask;
+ UINT32 Timeout;
+ UINT32 Idsts;
+ UINT32 BytCnt;
+ UINT32 BlkSize;
+
+ Packet = Trb->Packet;
+ PciIo = Trb->Private->PciIo;
+
+ ArmDataSynchronizationBarrier ();
+ ArmInstructionSynchronizationBarrier ();
+ //
+ // Wait until MMC is idle
+ //
+ do {
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_STATUS,
+ TRUE,
+ sizeof (MmcStatus),
+ &MmcStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } while (MmcStatus & DW_MMC_STS_DATA_BUSY);
+
+ IntStatus = ~0;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RINTSTS,
+ FALSE,
+ sizeof (IntStatus),
+ &IntStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Cmd = CMD_INDEX (Packet->SdMmcCmdBlk->CommandIndex);
+ if ((Packet->SdMmcCmdBlk->CommandType == SdMmcCommandTypeAc) ||
+ (Packet->SdMmcCmdBlk->CommandType == SdMmcCommandTypeAdtc)) {
+ switch (Packet->SdMmcCmdBlk->CommandIndex) {
+ case SD_SET_RELATIVE_ADDR:
+ Cmd |= BIT_CMD_SEND_INIT;
+ break;
+ case SD_STOP_TRANSMISSION:
+ Cmd |= BIT_CMD_STOP_ABORT_CMD;
+ break;
+ case SD_SEND_SCR:
+ Trb->UseBE = TRUE;
+ break;
+ }
+ if (Packet->InTransferLength) {
+ Cmd |= BIT_CMD_WAIT_PRVDATA_COMPLETE | BIT_CMD_DATA_EXPECTED |
+ BIT_CMD_READ;
+ } else if (Packet->OutTransferLength) {
+ Cmd |= BIT_CMD_WAIT_PRVDATA_COMPLETE | BIT_CMD_DATA_EXPECTED |
+ BIT_CMD_WRITE;
+ }
+ Cmd |= BIT_CMD_RESPONSE_EXPECT | BIT_CMD_CHECK_RESPONSE_CRC;
+ } else {
+ switch (Packet->SdMmcCmdBlk->CommandIndex) {
+ case SD_GO_IDLE_STATE:
+ Cmd |= BIT_CMD_SEND_INIT;
+ break;
+ }
+ }
+ switch (Packet->SdMmcCmdBlk->ResponseType) {
+ case SdMmcResponseTypeR2:
+ Cmd |= BIT_CMD_RESPONSE_EXPECT | BIT_CMD_CHECK_RESPONSE_CRC |
+ BIT_CMD_LONG_RESPONSE;
+ break;
+ case SdMmcResponseTypeR3:
+ Cmd |= BIT_CMD_RESPONSE_EXPECT;
+ break;
+ case SdMmcResponseTypeR1b:
+ case SdMmcResponseTypeR4:
+ case SdMmcResponseTypeR6:
+ case SdMmcResponseTypeR7:
+ Cmd |= BIT_CMD_RESPONSE_EXPECT | BIT_CMD_CHECK_RESPONSE_CRC;
+ break;
+ }
+ Cmd |= BIT_CMD_USE_HOLD_REG | BIT_CMD_START;
+
+ if (Trb->UseFifo == TRUE) {
+ BytCnt = Packet->InTransferLength;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_BYTCNT,
+ FALSE,
+ sizeof (BytCnt),
+ &BytCnt
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if (Packet->InTransferLength > DW_MMC_BLOCK_SIZE) {
+ BlkSize = DW_MMC_BLOCK_SIZE;
+ } else {
+ BlkSize = Packet->InTransferLength;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_BLKSIZ,
+ FALSE,
+ sizeof (BlkSize),
+ &BlkSize
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "DwMmcHcReset: set block size fails: %r\n", Status));
+ return Status;
+ }
+ }
+
+ Argument = Packet->SdMmcCmdBlk->CommandArgument;
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_CMDARG,
+ FALSE,
+ sizeof (Argument),
+ &Argument
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ ArmDataSynchronizationBarrier ();
+ ArmInstructionSynchronizationBarrier ();
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_CMD,
+ FALSE,
+ sizeof (Cmd),
+ &Cmd
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ ArmDataSynchronizationBarrier ();
+ ArmInstructionSynchronizationBarrier ();
+
+ ErrMask = DW_MMC_INT_EBE | DW_MMC_INT_HLE | DW_MMC_INT_RTO |
+ DW_MMC_INT_RCRC | DW_MMC_INT_RE;
+ ErrMask |= DW_MMC_INT_DRT | DW_MMC_INT_SBE;
+ if (Packet->InTransferLength || Packet->OutTransferLength) {
+ ErrMask |= DW_MMC_INT_DCRC;
+ }
+ if (Trb->UseFifo == TRUE) {
+ Status = ReadFifo (Trb);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } else {
+ Timeout = 10000;
+ do {
+ if (--Timeout == 0) {
+ break;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RINTSTS,
+ TRUE,
+ sizeof (IntStatus),
+ &IntStatus
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ if (IntStatus & ErrMask) {
+ return EFI_DEVICE_ERROR;
+ }
+ if (Trb->DataLen && ((IntStatus & DW_MMC_INT_DTO) == 0)) {
+ //
+ // Transfer not Done
+ //
+ MicroSecondDelay (10);
+ continue;
+ }
+ MicroSecondDelay (10);
+ } while (!(IntStatus & DW_MMC_INT_CMD_DONE));
+ if (Packet->InTransferLength) {
+ do {
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_IDSTS,
+ TRUE,
+ sizeof (Idsts),
+ &Idsts
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } while ((Idsts & DW_MMC_IDSTS_RI) == 0);
+ Status = DwMmcHcStopDma (Private, Trb);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } else if (Packet->OutTransferLength) {
+ do {
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_IDSTS,
+ TRUE,
+ sizeof (Idsts),
+ &Idsts
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } while ((Idsts & DW_MMC_IDSTS_TI) == 0);
+ Status = DwMmcHcStopDma (Private, Trb);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } /* Packet->InTransferLength */
+ } /* UseFifo */
+ switch (Packet->SdMmcCmdBlk->ResponseType) {
+ case SdMmcResponseTypeR1:
+ case SdMmcResponseTypeR1b:
+ case SdMmcResponseTypeR3:
+ case SdMmcResponseTypeR4:
+ case SdMmcResponseTypeR5:
+ case SdMmcResponseTypeR6:
+ case SdMmcResponseTypeR7:
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP0,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp0),
+ &Packet->SdMmcStatusBlk->Resp0
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ break;
+ case SdMmcResponseTypeR2:
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP0,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp0),
+ &Packet->SdMmcStatusBlk->Resp0
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP1,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp1),
+ &Packet->SdMmcStatusBlk->Resp1
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP2,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp2),
+ &Packet->SdMmcStatusBlk->Resp2
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = DwMmcHcRwMmio (
+ PciIo,
+ Trb->Slot,
+ DW_MMC_RESP3,
+ TRUE,
+ sizeof (Packet->SdMmcStatusBlk->Resp3),
+ &Packet->SdMmcStatusBlk->Resp3
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ break;
+ }
+
+ //
+ // The workaround on SD_SEND_CSD is used to be compatible with SDHC.
+ //
+ if (Packet->SdMmcCmdBlk->CommandIndex == SD_SEND_CSD) {
+ {
+ UINT32 Buf[4];
+ ZeroMem (Buf, sizeof (Buf));
+ CopyMem (
+ (UINT8 *)Buf,
+ (UINT8 *)&Packet->SdMmcStatusBlk->Resp0 + 1,
+ sizeof (Buf) - 1
+ );
+ CopyMem (
+ (UINT8 *)&Packet->SdMmcStatusBlk->Resp0,
+ (UINT8 *)Buf,
+ sizeof (Buf) - 1
+ );
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Execute the specified TRB.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The TRB is sent to host controller successfully.
+ @retval Others Some erros happen when sending this request to the
+ host controller.
+
+**/
+EFI_STATUS
+DwMmcExecTrb (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_STATUS Status = EFI_SUCCESS;
+ UINT32 Slot;
+
+ Slot = Trb->Slot;
+ if (Private->Slot[Slot].CardType == EmmcCardType) {
+ Status = DwEmmcExecTrb (Private, Trb);
+ } else if (Private->Slot[Slot].CardType == SdCardType) {
+ Status = DwSdExecTrb (Private, Trb);
+ } else {
+ ASSERT (0);
+ }
+ return Status;
+}
+
+/**
+ Check the TRB execution result.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The TRB is executed successfully.
+ @retval EFI_NOT_READY The TRB is not completed for execution.
+ @retval Others Some erros happen when executing this request.
+
+**/
+EFI_STATUS
+DwMmcCheckTrbResult (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_STATUS Status;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+ UINT32 Idsts;
+
+ Packet = Trb->Packet;
+ if (Trb->UseFifo == TRUE) {
+ return EFI_SUCCESS;
+ }
+ if (Packet->InTransferLength) {
+ do {
+ Status = DwMmcHcRwMmio (
+ Private->PciIo,
+ Trb->Slot,
+ DW_MMC_IDSTS,
+ TRUE,
+ sizeof (Idsts),
+ &Idsts
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } while ((Idsts & BIT1) == 0);
+ } else if (Packet->OutTransferLength) {
+ do {
+ Status = DwMmcHcRwMmio (
+ Private->PciIo,
+ Trb->Slot,
+ DW_MMC_IDSTS,
+ TRUE,
+ sizeof (Idsts),
+ &Idsts
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ } while ((Idsts & BIT0) == 0);
+ } else {
+ return EFI_SUCCESS;
+ }
+ Idsts = ~0;
+ Status = DwMmcHcRwMmio (
+ Private->PciIo,
+ Trb->Slot,
+ DW_MMC_IDSTS,
+ FALSE,
+ sizeof (Idsts), &Idsts);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Wait for the TRB execution result.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Trb The pointer to the DW_MMC_HC_TRB instance.
+
+ @retval EFI_SUCCESS The TRB is executed successfully.
+ @retval Others Some erros happen when executing this request.
+
+**/
+EFI_STATUS
+DwMmcWaitTrbResult (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN DW_MMC_HC_TRB *Trb
+ )
+{
+ EFI_STATUS Status;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet;
+ UINT64 Timeout;
+ BOOLEAN InfiniteWait;
+
+ Packet = Trb->Packet;
+ //
+ // Wait Command Complete Interrupt Status bit in Normal Interrupt Status
+ // Register
+ //
+ Timeout = Packet->Timeout;
+ if (Timeout == 0) {
+ InfiniteWait = TRUE;
+ } else {
+ InfiniteWait = FALSE;
+ }
+
+ while (InfiniteWait || (Timeout > 0)) {
+ //
+ // Check Trb execution result by reading Normal Interrupt Status register.
+ //
+ Status = DwMmcCheckTrbResult (Private, Trb);
+ if (Status != EFI_NOT_READY) {
+ return Status;
+ }
+ //
+ // Stall for 1 microsecond.
+ //
+ gBS->Stall (1);
+
+ Timeout--;
+ }
+
+ return EFI_TIMEOUT;
+}
diff --git a/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.h b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.h
new file mode 100644
index 000000000000..8b5753a16793
--- /dev/null
+++ b/EmbeddedPkg/Drivers/DwMmcHcDxe/DwMmcHci.h
@@ -0,0 +1,636 @@
+/** @file
+
+ Provides some data structure definitions used by the SD/MMC host controller
+ driver.
+
+ Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2018, Linaro Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _DW_MMC_HCI_H_
+#define _DW_MMC_HCI_H_
+
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/TimerLib.h>
+
+#include <Protocol/PlatformDwMmc.h>
+
+//
+// SD Host Controller SlotInfo Register Offset
+//
+#define DW_MMC_HC_SLOT_OFFSET 0x40
+
+#define DW_MMC_HC_MAX_SLOT 1
+
+//
+// SD Host Controller MMIO Register Offset
+//
+#define DW_MMC_CTRL 0x000
+#define DW_MMC_PWREN 0x004
+#define DW_MMC_CLKDIV 0x008
+#define DW_MMC_CLKSRC 0x00c
+#define DW_MMC_CLKENA 0x010
+#define DW_MMC_TMOUT 0x014
+#define DW_MMC_CTYPE 0x018
+#define DW_MMC_BLKSIZ 0x01c
+#define DW_MMC_BYTCNT 0x020
+#define DW_MMC_INTMASK 0x024
+#define DW_MMC_CMDARG 0x028
+#define DW_MMC_CMD 0x02c
+#define DW_MMC_RESP0 0x030
+#define DW_MMC_RESP1 0x034
+#define DW_MMC_RESP2 0x038
+#define DW_MMC_RESP3 0x03c
+#define DW_MMC_RINTSTS 0x044
+#define DW_MMC_STATUS 0x048
+#define DW_MMC_FIFOTH 0x04c
+#define DW_MMC_GPIO 0x058
+#define DW_MMC_DEBNCE 0x064
+#define DW_MMC_USRID 0x068
+#define DW_MMC_VERID 0x06c
+#define DW_MMC_HCON 0x070
+#define DW_MMC_UHSREG 0x074
+#define DW_MMC_BMOD 0x080
+#define DW_MMC_DBADDR 0x088
+#define DW_MMC_IDSTS 0x08c
+#define DW_MMC_IDINTEN 0x090
+#define DW_MMC_DSCADDR 0x094
+#define DW_MMC_BUFADDR 0x098
+#define DW_MMC_CARDTHRCTL 0x100
+#define DW_MMC_UHSREG_EXT 0x108
+#define DW_MMC_ENABLE_SHIFT 0x110
+#define DW_MMC_FIFO_START 0x200
+
+#define GET_IDSTS_DMAC_FSM(x) (((x) >> 13) & 0xf)
+#define IDSTS_FSM_DMA_IDLE 0
+#define IDSTS_FSM_DMA_SUSPEND 1
+#define IDSTS_FSM_DESC_RD 2
+#define IDSTS_FSM_DESC_CHK 3
+#define IDSTS_FSM_DMA_RD_REQ_WAIT 4
+#define IDSTS_FSM_DMA_WR_REQ_WAIT 5
+#define IDSTS_FSM_DMA_RD 6
+#define IDSTS_FSM_DMA_WR 7
+#define IDSTS_FSM_DESC_CLOSE 8
+#define IDSTS_FSM_MASK 0xf
+
+#define CMD_UPDATE_CLK 0x80202000
+#define CMD_START_BIT (1 << 31)
+
+#define MMC_8BIT_MODE (1 << 16)
+#define MMC_4BIT_MODE (1 << 0)
+#define MMC_1BIT_MODE 0
+
+#define DW_MMC_BLOCK_SIZE 512
+
+#define CMD_INDEX_MASK 0x3F
+#define BIT_CMD_RESPONSE_EXPECT (1 << 6)
+#define BIT_CMD_LONG_RESPONSE (1 << 7)
+#define BIT_CMD_CHECK_RESPONSE_CRC (1 << 8)
+#define BIT_CMD_DATA_EXPECTED (1 << 9)
+#define BIT_CMD_READ (0 << 10)
+#define BIT_CMD_WRITE (1 << 10)
+#define BIT_CMD_BLOCK_TRANSFER (0 << 11)
+#define BIT_CMD_STREAM_TRANSFER (1 << 11)
+#define BIT_CMD_SEND_AUTO_STOP (1 << 12)
+#define BIT_CMD_WAIT_PRVDATA_COMPLETE (1 << 13)
+#define BIT_CMD_STOP_ABORT_CMD (1 << 14)
+#define BIT_CMD_SEND_INIT (1 << 15)
+#define BIT_CMD_UPDATE_CLOCK_ONLY (1 << 21)
+#define BIT_CMD_READ_CEATA_DEVICE (1 << 22)
+#define BIT_CMD_CCS_EXPECTED (1 << 23)
+#define BIT_CMD_ENABLE_BOOT (1 << 24)
+#define BIT_CMD_EXPECT_BOOT_ACK (1 << 25)
+#define BIT_CMD_DISABLE_BOOT (1 << 26)
+#define BIT_CMD_MANDATORY_BOOT (0 << 27)
+#define BIT_CMD_ALTERNATE_BOOT (1 << 27)
+#define BIT_CMD_VOLT_SWITCH (1 << 28)
+#define BIT_CMD_USE_HOLD_REG (1 << 29)
+#define BIT_CMD_START (1 << 31)
+
+#define CMD_INDEX(x) ((x) & CMD_INDEX_MASK)
+
+#define DW_MMC_INT_EBE (1 << 15) /* End-bit Err */
+#define DW_MMC_INT_SBE (1 << 13) /* Start-bit Err */
+#define DW_MMC_INT_HLE (1 << 12) /* Hardware-lock Err */
+#define DW_MMC_INT_FRUN (1 << 11) /* FIFO UN/OV RUN */
+#define DW_MMC_INT_DRT (1 << 9) /* Data timeout */
+#define DW_MMC_INT_RTO (1 << 8) /* Response timeout */
+#define DW_MMC_INT_DCRC (1 << 7) /* Data CRC err */
+#define DW_MMC_INT_RCRC (1 << 6) /* Response CRC err */
+#define DW_MMC_INT_RXDR (1 << 5) /* Receive FIFO data request */
+#define DW_MMC_INT_TXDR (1 << 4) /* Transmit FIFO data request */
+#define DW_MMC_INT_DTO (1 << 3) /* Data trans over */
+#define DW_MMC_INT_CMD_DONE (1 << 2) /* Command done */
+#define DW_MMC_INT_RE (1 << 1) /* Response error */
+
+#define DW_MMC_IDMAC_DES0_DIC (1 << 1)
+#define DW_MMC_IDMAC_DES0_LD (1 << 2)
+#define DW_MMC_IDMAC_DES0_FS (1 << 3)
+#define DW_MMC_IDMAC_DES0_CH (1 << 4)
+#define DW_MMC_IDMAC_DES0_ER (1 << 5)
+#define DW_MMC_IDMAC_DES0_CES (1 << 30)
+#define DW_MMC_IDMAC_DES0_OWN (1 << 31)
+#define DW_MMC_IDMAC_DES1_BS1(x) ((x) & 0x1fff)
+#define DW_MMC_IDMAC_DES2_BS2(x) (((x) & 0x1fff) << 13)
+#define DW_MMC_IDMAC_SWRESET (1 << 0)
+#define DW_MMC_IDMAC_FB (1 << 1)
+#define DW_MMC_IDMAC_ENABLE (1 << 7)
+
+#define DW_MMC_CTRL_RESET (1 << 0)
+#define DW_MMC_CTRL_FIFO_RESET (1 << 1)
+#define DW_MMC_CTRL_DMA_RESET (1 << 2)
+#define DW_MMC_CTRL_INT_EN (1 << 4)
+#define DW_MMC_CTRL_DMA_EN (1 << 5)
+#define DW_MMC_CTRL_IDMAC_EN (1 << 25)
+#define DW_MMC_CTRL_RESET_ALL (DW_MMC_CTRL_RESET | DW_MMC_CTRL_FIFO_RESET | DW_MMC_CTRL_DMA_RESET)
+
+#define DW_MMC_STS_DATA_BUSY (1 << 9)
+#define DW_MMC_STS_FIFO_COUNT(x) (((x) & 0x1fff) << 17) /* Number of filled locations in FIFO */
+#define GET_STS_FIFO_COUNT(x) (((x) >> 17) & 0x1fff)
+
+#define DW_MMC_BMOD_SWR (1 << 0) /* Software Reset */
+#define DW_MMC_BMOD_FB (1 << 1) /* Fix Burst */
+#define DW_MMC_BMOD_DE (1 << 7) /* IDMAC Enable */
+
+#define DW_MMC_IDSTS_TI (1 << 0) /* Transmit Interrupt */
+#define DW_MMC_IDSTS_RI (1 << 1) /* Receive Interrupt */
+
+#define DW_MMC_FIFO_TWMARK(x) ((x) & 0xfff)
+#define DW_MMC_FIFO_RWMARK(x) (((x) & 0x1ff) << 16)
+#define DW_MMC_DMA_BURST_SIZE(x) (((x) & 0x7) << 28)
+
+#define DW_MMC_CARD_RD_THR(x) (((x) & 0xfff) << 16)
+#define DW_MMC_CARD_RD_THR_EN (1 << 0)
+
+#define UHS_DDR_MODE (1 << 16)
+
+#define GENCLK_DIV 7
+
+#define DW_MMC_GPIO_CLK_DIV(x) (((x) & 0xf) << 8)
+#define DW_MMC_GPIO_USE_SAMPLE_DLY(x) (((x) & 1) << 13)
+#define DW_MMC_GPIO_CLK_ENABLE BIT16
+
+#define UHSEXT_SAMPLE_PHASE(x) (((x) & 0x1f) << 16)
+#define UHSEXT_SAMPLE_DRVPHASE(x) (((x) & 0x1f) << 21)
+#define UHSEXT_SAMPLE_DLY(x) (((x) & 0x1f) << 26)
+
+#define DWMMC_DMA_BUF_SIZE (512 * 8)
+#define DWMMC_FIFO_THRESHOLD 16
+
+#define DWMMC_INIT_CLOCK_FREQ 400 /* KHz */
+
+//
+// The transfer modes supported by SD Host Controller
+// Simplified Spec 3.0 Table 1-2
+//
+typedef enum {
+ SdMmcNoData,
+ SdMmcPioMode,
+ SdMmcSdmaMode,
+ SdMmcAdmaMode
+} DW_MMC_HC_TRANSFER_MODE;
+
+//
+// The maximum data length of each descriptor line
+//
+#define ADMA_MAX_DATA_PER_LINE 0x10000
+
+typedef struct {
+ UINT32 Des0;
+ UINT32 Des1;
+ UINT32 Des2;
+ UINT32 Des3;
+} DW_MMC_HC_DMA_DESC_LINE;
+
+#define SD_MMC_SDMA_BOUNDARY 512 * 1024
+#define SD_MMC_SDMA_ROUND_UP(x, n) (((x) + n) & ~(n - 1))
+
+typedef struct {
+ UINT8 FirstBar:3; // bit 0:2
+ UINT8 Reserved:1; // bit 3
+ UINT8 SlotNum:3; // bit 4:6
+ UINT8 Reserved1:1; // bit 7
+} DW_MMC_HC_SLOT_INFO;
+
+/**
+ Dump the content of SD/MMC host controller's Capability Register.
+
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Capability The buffer to store the capability data.
+
+**/
+VOID
+DumpCapabilityReg (
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP *Capability
+ );
+
+/**
+ Read SlotInfo register from SD/MMC host controller pci config space.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[out] FirstBar The buffer to store the first BAR value.
+ @param[out] SlotNum The buffer to store the supported slot number.
+
+ @retval EFI_SUCCESS The operation succeeds.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcGetSlotInfo (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ OUT UINT8 *FirstBar,
+ OUT UINT8 *SlotNum
+ );
+
+/**
+ Read/Write specified SD/MMC host controller mmio register.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] BarIndex The BAR index of the standard PCI Configuration
+ header to use as the base address for the memory
+ operation to perform.
+ @param[in] Offset The offset within the selected BAR to start the
+ memory operation.
+ @param[in] Read A boolean to indicate it's read or write operation.
+ @param[in] Count The width of the mmio register in bytes.
+ Must be 1, 2 , 4 or 8 bytes.
+ @param[in, out] Data For read operations, the destination buffer to store
+ the results. For write operations, the source buffer
+ to write data from. The caller is responsible for
+ having ownership of the data buffer and ensuring its
+ size not less than Count bytes.
+
+ @retval EFI_INVALID_PARAMETER The PciIo or Data is NULL or the Count is not valid.
+ @retval EFI_SUCCESS The read/write operation succeeds.
+ @retval Others The read/write operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcRwMmio (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 BarIndex,
+ IN UINT32 Offset,
+ IN BOOLEAN Read,
+ IN UINT8 Count,
+ IN OUT VOID *Data
+ );
+
+/**
+ Do OR operation with the value of the specified SD/MMC host controller mmio register.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] BarIndex The BAR index of the standard PCI Configuration
+ header to use as the base address for the memory
+ operation to perform.
+ @param[in] Offset The offset within the selected BAR to start the
+ memory operation.
+ @param[in] Count The width of the mmio register in bytes.
+ Must be 1, 2 , 4 or 8 bytes.
+ @param[in] OrData The pointer to the data used to do OR operation.
+ The caller is responsible for having ownership of
+ the data buffer and ensuring its size not less than
+ Count bytes.
+
+ @retval EFI_INVALID_PARAMETER The PciIo or OrData is NULL or the Count is not valid.
+ @retval EFI_SUCCESS The OR operation succeeds.
+ @retval Others The OR operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcOrMmio (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 BarIndex,
+ IN UINT32 Offset,
+ IN UINT8 Count,
+ IN VOID *OrData
+ );
+
+/**
+ Do AND operation with the value of the specified SD/MMC host controller mmio register.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] BarIndex The BAR index of the standard PCI Configuration
+ header to use as the base address for the memory
+ operation to perform.
+ @param[in] Offset The offset within the selected BAR to start the
+ memory operation.
+ @param[in] Count The width of the mmio register in bytes.
+ Must be 1, 2 , 4 or 8 bytes.
+ @param[in] AndData The pointer to the data used to do AND operation.
+ The caller is responsible for having ownership of
+ the data buffer and ensuring its size not less than
+ Count bytes.
+
+ @retval EFI_INVALID_PARAMETER The PciIo or AndData is NULL or the Count is not valid.
+ @retval EFI_SUCCESS The AND operation succeeds.
+ @retval Others The AND operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcAndMmio (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 BarIndex,
+ IN UINT32 Offset,
+ IN UINT8 Count,
+ IN VOID *AndData
+ );
+
+/**
+ Wait for the value of the specified MMIO register set to the test value.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] BarIndex The BAR index of the standard PCI Configuration
+ header to use as the base address for the memory
+ operation to perform.
+ @param[in] Offset The offset within the selected BAR to start the
+ memory operation.
+ @param[in] Count The width of the mmio register in bytes.
+ Must be 1, 2, 4 or 8 bytes.
+ @param[in] MaskValue The mask value of memory.
+ @param[in] TestValue The test value of memory.
+ @param[in] Timeout The time out value for wait memory set, uses 1
+ microsecond as a unit.
+
+ @retval EFI_TIMEOUT The MMIO register hasn't expected value in timeout
+ range.
+ @retval EFI_SUCCESS The MMIO register has expected value.
+ @retval Others The MMIO operation fails.
+
+**/
+EFI_STATUS
+EFIAPI
+DwMmcHcWaitMmioSet (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 BarIndex,
+ IN UINT32 Offset,
+ IN UINT8 Count,
+ IN UINT64 MaskValue,
+ IN UINT64 TestValue,
+ IN UINT64 Timeout
+ );
+
+/**
+ Software reset the specified SD/MMC host controller.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The software reset executes successfully.
+ @retval Others The software reset fails.
+
+**/
+EFI_STATUS
+DwMmcHcReset (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ );
+
+/**
+ Set all interrupt status bits in Normal and Error Interrupt Status Enable
+ register.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The operation executes successfully.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+DwMmcHcEnableInterrupt (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot
+ );
+
+/**
+ Get the capability data from the specified slot.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[out] Capability The buffer to store the capability data.
+
+ @retval EFI_SUCCESS The operation executes successfully.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+DwMmcHcGetCapability (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_HANDLE Controller,
+ IN UINT8 Slot,
+ OUT DW_MMC_HC_SLOT_CAP *Capability
+ );
+
+/**
+ Get the maximum current capability data from the specified slot.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[out] MaxCurrent The buffer to store the maximum current capability data.
+
+ @retval EFI_SUCCESS The operation executes successfully.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+DwMmcHcGetMaxCurrent (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ OUT UINT64 *MaxCurrent
+ );
+
+/**
+ Detect whether there is a SD/MMC card attached at the specified SD/MMC host controller
+ slot.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.1 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[out] MediaPresent The pointer to the media present boolean value.
+
+ @retval EFI_SUCCESS There is no media change happened.
+ @retval EFI_MEDIA_CHANGED There is media change happened.
+ @retval Others The detection fails.
+
+**/
+EFI_STATUS
+DwMmcHcCardDetect (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_HANDLE Controller,
+ IN UINT8 Slot,
+ OUT BOOLEAN *MediaPresent
+ );
+
+/**
+ Stop SD/MMC card clock.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.2.2 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS Succeed to stop SD/MMC clock.
+ @retval Others Fail to stop SD/MMC clock.
+
+**/
+EFI_STATUS
+DwMmcHcStopClock (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot
+ );
+
+/**
+ SD/MMC card clock supply.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.2.1 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] ClockFreq The max clock frequency to be set. The unit is KHz.
+ @param[in] Capability The capability of the slot.
+
+ @retval EFI_SUCCESS The clock is supplied successfully.
+ @retval Others The clock isn't supplied successfully.
+
+**/
+EFI_STATUS
+DwMmcHcClockSupply (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN UINT64 ClockFreq,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ );
+
+/**
+ SD/MMC bus power control.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] PowerCtrl The value setting to the power control register.
+
+ @retval TRUE There is a SD/MMC card attached.
+ @retval FALSE There is no a SD/MMC card attached.
+
+**/
+EFI_STATUS
+DwMmcHcPowerControl (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN UINT8 PowerCtrl
+ );
+
+/**
+ Set the SD/MMC bus width.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.4 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] BusWidth The bus width used by the SD/MMC device, it must be 1, 4 or 8.
+
+ @retval EFI_SUCCESS The bus width is set successfully.
+ @retval Others The bus width isn't set successfully.
+
+**/
+EFI_STATUS
+DwMmcHcSetBusWidth (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN BOOLEAN IsDdr,
+ IN UINT16 BusWidth
+ );
+
+/**
+ Supply SD/MMC card with lowest clock frequency at initialization.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Capability The capability of the slot.
+
+ @retval EFI_SUCCESS The clock is supplied successfully.
+ @retval Others The clock isn't supplied successfully.
+
+**/
+EFI_STATUS
+DwMmcHcInitClockFreq (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ );
+
+/**
+ Supply SD/MMC card with maximum voltage at initialization.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 3.3 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Capability The capability of the slot.
+
+ @retval EFI_SUCCESS The voltage is supplied successfully.
+ @retval Others The voltage isn't supplied successfully.
+
+**/
+EFI_STATUS
+DwMmcHcInitPowerVoltage (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ );
+
+/**
+ Initialize the Timeout Control register with most conservative value at initialization.
+
+ Refer to SD Host Controller Simplified spec 3.0 Section 2.2.15 for details.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The timeout control register is configured successfully.
+ @retval Others The timeout control register isn't configured successfully.
+
+**/
+EFI_STATUS
+DwMmcHcInitTimeoutCtrl (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot
+ );
+
+/**
+ Initial SD/MMC host controller with lowest clock frequency, max power and max timeout value
+ at initialization.
+
+ @param[in] PciIo The PCI IO protocol instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Capability The capability of the slot.
+
+ @retval EFI_SUCCESS The host controller is initialized successfully.
+ @retval Others The host controller isn't initialized successfully.
+
+**/
+EFI_STATUS
+DwMmcHcInitHost (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN UINT8 Slot,
+ IN DW_MMC_HC_SLOT_CAP Capability
+ );
+
+#endif /* _DW_MMC_HCI_H_ */
diff --git a/EmbeddedPkg/Drivers/DwMmcHcDxe/EmmcDevice.c b/EmbeddedPkg/Drivers/DwMmcHcDxe/EmmcDevice.c
new file mode 100644
index 000000000000..9fb8c7028771
--- /dev/null
+++ b/EmbeddedPkg/Drivers/DwMmcHcDxe/EmmcDevice.c
@@ -0,0 +1,976 @@
+/** @file
+ This file provides some helper functions which are specific for EMMC device.
+
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2018, Linaro. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DwMmcHcDxe.h"
+
+#define EMMC_GET_STATE(x) (((x) >> 9) & 0xf)
+#define EMMC_STATE_IDLE 0
+#define EMMC_STATE_READY 1
+#define EMMC_STATE_IDENT 2
+#define EMMC_STATE_STBY 3
+#define EMMC_STATE_TRAN 4
+#define EMMC_STATE_DATA 5
+#define EMMC_STATE_RCV 6
+#define EMMC_STATE_PRG 7
+#define EMMC_STATE_DIS 8
+#define EMMC_STATE_BTST 9
+#define EMMC_STATE_SLP 10
+
+#define EMMC_CMD1_CAPACITY_LESS_THAN_2GB 0x00FF8080 // Capacity <= 2GB, byte addressing used
+#define EMMC_CMD1_CAPACITY_GREATER_THAN_2GB 0x40FF8080 // Capacity > 2GB, 512-byte sector addressing used
+
+/**
+ Send command GO_IDLE_STATE (CMD0 with argument of 0x00000000) to the device to
+ make it go to Idle State.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The EMMC device is reset correctly.
+ @retval Others The device reset fails.
+
+**/
+EFI_STATUS
+EmmcReset (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_GO_IDLE_STATE;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeBc;
+ SdMmcCmdBlk.ResponseType = 0;
+ SdMmcCmdBlk.CommandArgument = 0;
+
+ gBS->Stall (1000);
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SEND_OP_COND to the EMMC device to get the data of the OCR register.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in, out] Argument On input, the argument of SEND_OP_COND is to send to the device.
+ On output, the argument is the value of OCR register.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcGetOcr (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN OUT UINT32 *Argument
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_SEND_OP_COND;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeBcr;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR3;
+ SdMmcCmdBlk.CommandArgument = *Argument;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (!EFI_ERROR (Status)) {
+ //
+ // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
+ //
+ *Argument = SdMmcStatusBlk.Resp0;
+ }
+
+ return Status;
+}
+
+/**
+ Broadcast command ALL_SEND_CID to the bus to ask all the EMMC devices to send the
+ data of their CID registers.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcGetAllCid (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_ALL_SEND_CID;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeBcr;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
+ SdMmcCmdBlk.CommandArgument = 0;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SET_RELATIVE_ADDR to the EMMC device to assign a Relative device
+ Address (RCA).
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address to be assigned.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSetRca (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_SET_RELATIVE_ADDR;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SEND_CSD to the EMMC device to get the data of the CSD register.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address of selected device.
+ @param[out] Csd The buffer to store the content of the CSD register.
+ Note the caller should ignore the lowest byte of this
+ buffer as the content of this byte is meaningless even
+ if the operation succeeds.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcGetCsd (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ OUT EMMC_CSD *Csd
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_SEND_CSD;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (!EFI_ERROR (Status)) {
+ //
+ // Copy 128bit data for CSD structure.
+ //
+ CopyMem ((VOID *)Csd + 1, &SdMmcStatusBlk.Resp0, sizeof (EMMC_CSD) - 1);
+ }
+
+ return Status;
+}
+
+/**
+ Send command SELECT_DESELECT_CARD to the EMMC device to select/deselect it.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address of selected device.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSelect (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_SELECT_DESELECT_CARD;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SEND_EXT_CSD to the EMMC device to get the data of the EXT_CSD register.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[out] ExtCsd The buffer to store the content of the EXT_CSD register.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcGetExtCsd (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ OUT EMMC_EXT_CSD *ExtCsd
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_SEND_EXT_CSD;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAdtc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = 0x00000000;
+
+ Packet.InDataBuffer = ExtCsd;
+ Packet.InTransferLength = sizeof (EMMC_EXT_CSD);
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ return Status;
+}
+
+/**
+ Send command SWITCH to the EMMC device to switch the mode of operation of the
+ selected Device or modifies the EXT_CSD registers.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Access The access mode of SWTICH command.
+ @param[in] Index The offset of the field to be access.
+ @param[in] Value The value to be set to the specified field of EXT_CSD register.
+ @param[in] CmdSet The value of CmdSet field of EXT_CSD register.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitch (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT8 Access,
+ IN UINT8 Index,
+ IN UINT8 Value,
+ IN UINT8 CmdSet
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_SWITCH;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1b;
+ SdMmcCmdBlk.CommandArgument = (Access << 24) | (Index << 16) | (Value << 8) | CmdSet;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SEND_STATUS to the addressed EMMC device to get its status register.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.10.4 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address of addressed device.
+ @param[out] DevStatus The returned device status.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSendStatus (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ OUT UINT32 *DevStatus
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_SEND_STATUS;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (!EFI_ERROR (Status)) {
+ *DevStatus = SdMmcStatusBlk.Resp0;
+ }
+
+ return Status;
+}
+
+/**
+ Send command SEND_TUNING_BLOCK to the EMMC device for HS200 optimal sampling point
+ detection.
+
+ It may be sent up to 40 times until the host finishes the tuning procedure.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] BusWidth The bus width to work.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSendTuningBlk (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT8 BusWidth
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+ UINT8 TuningBlock[128];
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = EMMC_SEND_TUNING_BLOCK;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAdtc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = 0;
+
+ Packet.InDataBuffer = TuningBlock;
+ if (BusWidth == 8) {
+ Packet.InTransferLength = sizeof (TuningBlock);
+ } else {
+ Packet.InTransferLength = 64;
+ }
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Tunning the clock to get HS200 optimal sampling point.
+
+ Command SEND_TUNING_BLOCK may be sent up to 40 times until the host finishes the
+ tuning procedure.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
+ Simplified Spec 3.0 Figure 2-29 for details.
+
+ @param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] BusWidth The bus width to work.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcTuningClkForHs200 (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT8 BusWidth
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Switch the bus width to specified width.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.9 and SD Host Controller
+ Simplified Spec 3.0 Figure 3-7 for details.
+
+ @param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address to be assigned.
+ @param[in] IsDdr If TRUE, use dual data rate data simpling method. Otherwise
+ use single data rate data simpling method.
+ @param[in] BusWidth The bus width to be set, it could be 4 or 8.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitchBusWidth (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ IN BOOLEAN IsDdr,
+ IN UINT8 BusWidth
+ )
+{
+ EFI_STATUS Status;
+ UINT8 Access;
+ UINT8 Index;
+ UINT8 Value;
+ UINT8 CmdSet;
+ UINT32 DevStatus;
+
+ //
+ // Write Byte, the Value field is written into the byte pointed by Index.
+ //
+ Access = 0x03;
+ Index = OFFSET_OF (EMMC_EXT_CSD, BusWidth);
+ if (BusWidth == 1) {
+ Value = 0;
+ } else {
+ if (BusWidth == 4) {
+ Value = 1;
+ } else if (BusWidth == 8) {
+ Value = 2;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (IsDdr) {
+ Value += 4;
+ }
+ }
+
+ CmdSet = 0;
+ Status = EmmcSwitch (PassThru, Slot, Access, Index, Value, CmdSet);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: Switch to bus width %d fails with %r\n", BusWidth, Status));
+ return Status;
+ }
+
+ do {
+ Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSwitchBusWidth: Send status fails with %r\n", Status));
+ return Status;
+ }
+ //
+ // Check the switch operation is really successful or not.
+ //
+ } while ((DevStatus & 0xf) == EMMC_STATE_PRG);
+
+ Status = DwMmcHcSetBusWidth (PciIo, Slot, IsDdr, BusWidth);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return Status;
+}
+
+/**
+ Switch the clock frequency to the specified value.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.6 and SD Host Controller
+ Simplified Spec 3.0 Figure 3-3 for details.
+
+ @param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address to be assigned.
+ @param[in] HsTiming The value to be written to HS_TIMING field of EXT_CSD register.
+ @param[in] ClockFreq The max clock frequency to be set, the unit is MHz.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitchClockFreq (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ IN UINT8 HsTiming,
+ IN UINT32 ClockFreq
+ )
+{
+ EFI_STATUS Status;
+ UINT8 Access;
+ UINT8 Index;
+ UINT8 Value;
+ UINT8 CmdSet;
+ UINT32 DevStatus;
+ DW_MMC_HC_PRIVATE_DATA *Private;
+
+ Private = DW_MMC_HC_PRIVATE_FROM_THIS (PassThru);
+ //
+ // Write Byte, the Value field is written into the byte pointed by Index.
+ //
+ Access = 0x03;
+ Index = OFFSET_OF (EMMC_EXT_CSD, HsTiming);
+ Value = HsTiming;
+ CmdSet = 0;
+
+ Status = EmmcSwitch (PassThru, Slot, Access, Index, Value, CmdSet);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSwitchClockFreq: Switch to hstiming %d fails with %r\n", HsTiming, Status));
+ return Status;
+ }
+
+ Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSwitchClockFreq: Send status fails with %r\n", Status));
+ return Status;
+ }
+ //
+ // Check the switch operation is really successful or not.
+ //
+ if ((DevStatus & BIT7) != 0) {
+ DEBUG ((DEBUG_ERROR, "EmmcSwitchClockFreq: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));
+ return EFI_DEVICE_ERROR;
+ }
+ //
+ // Convert the clock freq unit from MHz to KHz.
+ //
+ Status = DwMmcHcClockSupply (PciIo, Slot, ClockFreq * 1000, Private->Capability[Slot]);
+
+ return Status;
+}
+
+/**
+ Switch to the High Speed timing according to request.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
+ Simplified Spec 3.0 Figure 2-29 for details.
+
+ @param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address to be assigned.
+ @param[in] ClockFreq The max clock frequency to be set.
+ @param[in] IsDdr If TRUE, use dual data rate data simpling method. Otherwise
+ use single data rate data simpling method.
+ @param[in] BusWidth The bus width to be set, it could be 4 or 8.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitchToHighSpeed (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ IN UINT32 ClockFreq,
+ IN BOOLEAN IsDdr,
+ IN UINT8 BusWidth
+ )
+{
+ EFI_STATUS Status;
+ UINT8 HsTiming;
+
+ HsTiming = 1;
+ Status = EmmcSwitchClockFreq (PciIo, PassThru, Slot, Rca, HsTiming, ClockFreq);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, IsDdr, BusWidth);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Switch to the HS200 timing according to request.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
+ Simplified Spec 3.0 Figure 2-29 for details.
+
+ @param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address to be assigned.
+ @param[in] ClockFreq The max clock frequency to be set.
+ @param[in] BusWidth The bus width to be set, it could be 4 or 8.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSwitchToHS200 (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ IN UINT32 ClockFreq,
+ IN UINT8 BusWidth
+ )
+{
+ return EFI_SUCCESS;
+}
+
+/**
+ Switch the high speed timing according to request.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.6.8 and SD Host Controller
+ Simplified Spec 3.0 Figure 2-29 for details.
+
+ @param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address to be assigned.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+EmmcSetBusMode (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca
+ )
+{
+ EFI_STATUS Status;
+ EMMC_CSD Csd;
+ EMMC_EXT_CSD ExtCsd;
+ UINT8 HsTiming;
+ BOOLEAN IsDdr;
+ UINT32 DevStatus;
+ UINT32 ClockFreq;
+ UINT8 BusWidth;
+ DW_MMC_HC_PRIVATE_DATA *Private;
+
+ Private = DW_MMC_HC_PRIVATE_FROM_THIS (PassThru);
+ ASSERT (Private->Capability[Slot].BaseClkFreq != 0);
+
+ Status = EmmcGetCsd (PassThru, Slot, Rca, &Csd);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: GetCsd fails with %r\n", Status));
+ return Status;
+ }
+
+ Status = EmmcSelect (PassThru, Slot, Rca);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: Select fails with %r\n", Status));
+ return Status;
+ }
+
+ do {
+ Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: Get Status fails with %r\n", Status));
+ return Status;
+ }
+ } while (EMMC_GET_STATE (DevStatus) != EMMC_STATE_TRAN);
+
+ BusWidth = 1;
+ Status = EmmcSwitchBusWidth (PciIo, PassThru, Slot, Rca, FALSE, BusWidth);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ BusWidth = Private->Capability[Slot].BusWidth;
+ //
+ // Get Deivce_Type from EXT_CSD register.
+ //
+ Status = EmmcGetExtCsd (PassThru, Slot, &ExtCsd);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "EmmcSetBusMode: GetExtCsd fails with %r\n", Status));
+ return Status;
+ }
+
+ //
+ // Calculate supported bus speed/bus width/clock frequency.
+ //
+ HsTiming = 0;
+ IsDdr = FALSE;
+ ClockFreq = 0;
+ if (((ExtCsd.DeviceType & (BIT4 | BIT5)) != 0) && (Private->Capability[Slot].Sdr104 != 0)) {
+ HsTiming = 2;
+ IsDdr = FALSE;
+ ClockFreq = 200;
+ } else if (((ExtCsd.DeviceType & (BIT2 | BIT3)) != 0) && (Private->Capability[Slot].Ddr50 != 0)) {
+ HsTiming = 1;
+ IsDdr = TRUE;
+ ClockFreq = 52;
+ } else if (((ExtCsd.DeviceType & BIT1) != 0) && (Private->Capability[Slot].HighSpeed != 0)) {
+ HsTiming = 1;
+ IsDdr = FALSE;
+ ClockFreq = 52;
+ } else if (((ExtCsd.DeviceType & BIT0) != 0) && (Private->Capability[Slot].HighSpeed != 0)) {
+ HsTiming = 1;
+ IsDdr = FALSE;
+ ClockFreq = 26;
+ }
+
+ if ((ClockFreq == 0) || (HsTiming == 0)) {
+ //
+ // Continue using default setting.
+ //
+ return EFI_SUCCESS;
+ }
+
+ DEBUG ((DEBUG_INFO, "EmmcSetBusMode: HsTiming %d ClockFreq %d BusWidth %d Ddr %a\n", HsTiming, ClockFreq, BusWidth, IsDdr ? "TRUE":"FALSE"));
+
+ if (HsTiming == 2) {
+ //
+ // Execute HS200 timing switch procedure
+ //
+ Status = EmmcSwitchToHS200 (PciIo, PassThru, Slot, Rca, ClockFreq, BusWidth);
+ } else {
+ //
+ // Execute High Speed timing switch procedure
+ //
+ Status = EmmcSwitchToHighSpeed (PciIo, PassThru, Slot, Rca, ClockFreq, IsDdr, BusWidth);
+ }
+
+ DEBUG ((DEBUG_INFO, "EmmcSetBusMode: Switch to %a %r\n", (HsTiming == 3) ? "HS400" : ((HsTiming == 2) ? "HS200" : "HighSpeed"), Status));
+
+ return Status;
+}
+
+/**
+ Execute EMMC device identification procedure.
+
+ Refer to EMMC Electrical Standard Spec 5.1 Section 6.4 for details.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS There is a EMMC card.
+ @retval Others There is not a EMMC card.
+
+**/
+EFI_STATUS
+EmmcIdentification (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN UINT8 Slot
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru;
+ UINT32 Ocr;
+ UINT16 Rca;
+ UINT32 DevStatus;
+ UINT32 Timeout;
+
+ PciIo = Private->PciIo;
+ PassThru = &Private->PassThru;
+
+ Status = EmmcReset (PassThru, Slot);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "EmmcIdentification: Executing Cmd0 fails with %r\n", Status));
+ return Status;
+ }
+
+ Timeout = 100;
+ do {
+ Ocr = EMMC_CMD1_CAPACITY_GREATER_THAN_2GB;
+ Status = EmmcGetOcr (PassThru, Slot, &Ocr);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "EmmcIdentification: Executing Cmd1 fails with %r\n", Status));
+ return Status;
+ }
+ if (--Timeout <= 0) {
+ return EFI_DEVICE_ERROR;
+ }
+ MicroSecondDelay (100);
+ } while ((Ocr & BIT31) == 0);
+
+ Status = EmmcGetAllCid (PassThru, Slot);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "EmmcIdentification: Executing Cmd2 fails with %r\n", Status));
+ return Status;
+ }
+ //
+ // Slot starts from 0 and valid RCA starts from 1.
+ // Here we takes a simple formula to calculate the RCA.
+ // Don't support multiple devices on the slot, that is
+ // shared bus slot feature.
+ //
+ Rca = Slot + 1;
+ Status = EmmcSetRca (PassThru, Slot, Rca);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "EmmcIdentification: Executing Cmd3 fails with %r\n", Status));
+ return Status;
+ }
+ //
+ // Enter Data Tranfer Mode.
+ //
+ DEBUG ((DEBUG_INFO, "EmmcIdentification: Found a EMMC device at slot [%d], RCA [%d]\n", Slot, Rca));
+ Private->Slot[Slot].CardType = EmmcCardType;
+
+ Status = EmmcSetBusMode (PciIo, PassThru, Slot, Rca);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Exit DATA Mode.
+ //
+ do {
+ Status = EmmcSendStatus (PassThru, Slot, Rca, &DevStatus);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "EmmcSwitchBusWidth: Send status fails with %r\n", Status));
+ return Status;
+ }
+ } while ((DevStatus & 0xf) == EMMC_STATE_DATA);
+
+ return Status;
+}
diff --git a/EmbeddedPkg/Drivers/DwMmcHcDxe/SdDevice.c b/EmbeddedPkg/Drivers/DwMmcHcDxe/SdDevice.c
new file mode 100644
index 000000000000..cf7ec663f18e
--- /dev/null
+++ b/EmbeddedPkg/Drivers/DwMmcHcDxe/SdDevice.c
@@ -0,0 +1,1051 @@
+/** @file
+ This file provides some helper functions which are specific for SD card
+ device.
+
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2018, Linaro. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "DwMmcHcDxe.h"
+
+/**
+ Send command GO_IDLE_STATE to the device to make it go to Idle State.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL
+ instance.
+ @param[in] Slot The slot number of the SD card to send the command
+ to.
+
+ @retval EFI_SUCCESS The SD device is reset correctly.
+ @retval Others The device reset fails.
+
+**/
+EFI_STATUS
+SdCardReset (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_GO_IDLE_STATE;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeBc;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SEND_IF_COND to the device to inquiry the SD Memory Card interface
+ condition.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] SupplyVoltage The supplied voltage by the host.
+ @param[in] CheckPattern The check pattern to be sent to the device.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardVoltageCheck (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT8 SupplyVoltage,
+ IN UINT8 CheckPattern
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_SEND_IF_COND;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeBcr;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR7;
+ SdMmcCmdBlk.CommandArgument = (SupplyVoltage << 8) | CheckPattern;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ if (!EFI_ERROR (Status)) {
+ if (SdMmcStatusBlk.Resp0 != SdMmcCmdBlk.CommandArgument) {
+ return EFI_DEVICE_ERROR;
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Send command SDIO_SEND_OP_COND to the device to see whether it is SDIO device.
+
+ Refer to SDIO Simplified Spec 3 Section 3.2 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] VoltageWindow The supply voltage window.
+ @param[in] S18R The boolean to show if it should switch to 1.8v.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdioSendOpCond (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT32 VoltageWindow,
+ IN BOOLEAN S18R
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+ UINT32 Switch;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SDIO_SEND_OP_COND;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeBcr;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR4;
+
+ Switch = S18R ? BIT24 : 0;
+
+ SdMmcCmdBlk.CommandArgument = (VoltageWindow & 0xFFFFFF) | Switch;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SD_SEND_OP_COND to the device to see whether it is SDIO device.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address of addressed device.
+ @param[in] VoltageWindow The supply voltage window.
+ @param[in] S18R The boolean to show if it should switch to 1.8v.
+ @param[in] Xpc The boolean to show if it should provide 0.36w power control.
+ @param[in] Hcs The boolean to show if it support host capacity info.
+ @param[out] Ocr The buffer to store returned OCR register value.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardSendOpCond (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ IN UINT32 VoltageWindow,
+ IN BOOLEAN S18R,
+ IN BOOLEAN Xpc,
+ IN BOOLEAN Hcs,
+ OUT UINT32 *Ocr
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+ UINT32 Switch;
+ UINT32 MaxPower;
+ UINT32 HostCapacity;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_APP_CMD;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SdMmcCmdBlk.CommandIndex = SD_SEND_OP_COND;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeBcr;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR3;
+
+ Switch = S18R ? BIT24 : 0;
+ MaxPower = Xpc ? BIT28 : 0;
+ HostCapacity = Hcs ? BIT30 : 0;
+
+ SdMmcCmdBlk.CommandArgument = (VoltageWindow & 0xFFFFFF) | Switch | MaxPower | HostCapacity;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (!EFI_ERROR (Status)) {
+ //
+ // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
+ //
+ *Ocr = SdMmcStatusBlk.Resp0;
+ }
+
+ return Status;
+}
+
+/**
+ Broadcast command ALL_SEND_CID to the bus to ask all the SD devices to send the
+ data of their CID registers.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardAllSendCid (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_ALL_SEND_CID;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeBcr;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SET_RELATIVE_ADDR to the SD device to assign a Relative device
+ Address (RCA).
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[out] Rca The relative device address to assign.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardSetRca (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ OUT UINT16 *Rca
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_SET_RELATIVE_ADDR;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeBcr;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR6;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (!EFI_ERROR (Status)) {
+ *Rca = (UINT16)(SdMmcStatusBlk.Resp0 >> 16);
+ }
+
+ return Status;
+}
+
+/**
+ Send command SEND_CSD to the SD device to get the data of the CSD register.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address of selected device.
+ @param[out] Csd The buffer to store the content of the CSD register.
+ Note the caller should ignore the lowest byte of this
+ buffer as the content of this byte is meaningless even
+ if the operation succeeds.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardGetCsd (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ OUT SD_CSD *Csd
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_SEND_CSD;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR2;
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (!EFI_ERROR (Status)) {
+ //
+ // For details, refer to SD Host Controller Simplified Spec 3.0 Table 2-12.
+ //
+ CopyMem (((UINT8*)Csd) + 1, &SdMmcStatusBlk.Resp0, sizeof (SD_CSD) - 1);
+ }
+
+ return Status;
+}
+
+/**
+ Send command SEND_CSD to the SD device to get the data of the CSD register.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address of selected device.
+ @param[out] Scr The buffer to store the content of the SCR register.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardGetScr (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ OUT SD_SCR *Scr
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_APP_CMD;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SdMmcCmdBlk.CommandIndex = SD_SEND_SCR;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAdtc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+
+ Packet.InDataBuffer = Scr;
+ Packet.InTransferLength = sizeof (SD_SCR);
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SELECT_DESELECT_CARD to the SD device to select/deselect it.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address of selected device.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardSelect (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_SELECT_DESELECT_CARD;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ if (Rca != 0) {
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1b;
+ }
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command VOLTAGE_SWITCH to the SD device to switch the voltage of the device.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardVoltageSwitch (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_VOLTAGE_SWITCH;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = 0;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SET_BUS_WIDTH to the SD device to set the bus width.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address of addressed device.
+ @param[in] BusWidth The bus width to be set, it could be 1 or 4.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardSetBusWidth (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ IN UINT8 BusWidth
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+ UINT8 Value;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_APP_CMD;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ SdMmcCmdBlk.CommandIndex = SD_SET_BUS_WIDTH;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+
+ if (BusWidth == 1) {
+ Value = 0;
+ } else if (BusWidth == 4) {
+ Value = 2;
+ } else {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ SdMmcCmdBlk.CommandArgument = Value & 0x3;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ return Status;
+}
+
+/**
+ Send command SWITCH_FUNC to the SD device to check switchable function or switch card function.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] AccessMode The value for access mode group.
+ @param[in] CommandSystem The value for command set group.
+ @param[in] DriveStrength The value for drive length group.
+ @param[in] PowerLimit The value for power limit group.
+ @param[in] Mode Switch or check function.
+ @param[out] SwitchResp The return switch function status.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardSwitch (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT8 AccessMode,
+ IN UINT8 CommandSystem,
+ IN UINT8 DriveStrength,
+ IN UINT8 PowerLimit,
+ IN BOOLEAN Mode,
+ OUT UINT8 *SwitchResp
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+ UINT32 ModeValue;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_SWITCH_FUNC;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAdtc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+
+ ModeValue = Mode ? BIT31 : 0;
+ SdMmcCmdBlk.CommandArgument = (AccessMode & 0xF) | ((PowerLimit & 0xF) << 4) | \
+ ((DriveStrength & 0xF) << 8) | ((DriveStrength & 0xF) << 12) | \
+ ModeValue;
+
+ Packet.InDataBuffer = SwitchResp;
+ Packet.InTransferLength = 64;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Send command SEND_STATUS to the addressed SD device to get its status register.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address of addressed device.
+ @param[out] DevStatus The returned device status.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardSendStatus (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ OUT UINT32 *DevStatus
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_SEND_STATUS;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = (UINT32)Rca << 16;
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+ if (!EFI_ERROR (Status)) {
+ *DevStatus = SdMmcStatusBlk.Resp0;
+ }
+
+ return Status;
+}
+
+/**
+ Send command SEND_TUNING_BLOCK to the SD device for HS200 optimal sampling point
+ detection.
+
+ It may be sent up to 40 times until the host finishes the tuning procedure.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 for details.
+
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardSendTuningBlk (
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot
+ )
+{
+ EFI_SD_MMC_COMMAND_BLOCK SdMmcCmdBlk;
+ EFI_SD_MMC_STATUS_BLOCK SdMmcStatusBlk;
+ EFI_SD_MMC_PASS_THRU_COMMAND_PACKET Packet;
+ EFI_STATUS Status;
+ UINT8 TuningBlock[64];
+
+ ZeroMem (&SdMmcCmdBlk, sizeof (SdMmcCmdBlk));
+ ZeroMem (&SdMmcStatusBlk, sizeof (SdMmcStatusBlk));
+ ZeroMem (&Packet, sizeof (Packet));
+
+ Packet.SdMmcCmdBlk = &SdMmcCmdBlk;
+ Packet.SdMmcStatusBlk = &SdMmcStatusBlk;
+ Packet.Timeout = DW_MMC_HC_GENERIC_TIMEOUT;
+
+ SdMmcCmdBlk.CommandIndex = SD_SEND_TUNING_BLOCK;
+ SdMmcCmdBlk.CommandType = SdMmcCommandTypeAdtc;
+ SdMmcCmdBlk.ResponseType = SdMmcResponseTypeR1;
+ SdMmcCmdBlk.CommandArgument = 0;
+
+ Packet.InDataBuffer = TuningBlock;
+ Packet.InTransferLength = sizeof (TuningBlock);
+
+ Status = DwMmcPassThruPassThru (PassThru, Slot, &Packet, NULL);
+
+ return Status;
+}
+
+/**
+ Switch the bus width to specified width.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 and
+ SD Host Controller Simplified Spec 3.0 section Figure 3-7 for details.
+
+ @param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address to be assigned.
+ @param[in] BusWidth The bus width to be set, it could be 4 or 8.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardSwitchBusWidth (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ IN BOOLEAN IsDdr,
+ IN UINT8 BusWidth
+ )
+{
+ EFI_STATUS Status;
+ UINT32 DevStatus;
+
+ Status = SdCardSetBusWidth (PassThru, Slot, Rca, BusWidth);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SdCardSwitchBusWidth: Switch to bus width %d fails with %r\n", BusWidth, Status));
+ return Status;
+ }
+
+ Status = SdCardSendStatus (PassThru, Slot, Rca, &DevStatus);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SdCardSwitchBusWidth: Send status fails with %r\n", Status));
+ return Status;
+ }
+ //
+ // Check the switch operation is really successful or not.
+ //
+ if ((DevStatus >> 16) != 0) {
+ DEBUG ((DEBUG_ERROR, "SdCardSwitchBusWidth: The switch operation fails as DevStatus is 0x%08x\n", DevStatus));
+ return EFI_DEVICE_ERROR;
+ }
+
+ Status = DwMmcHcSetBusWidth (PciIo, Slot, IsDdr, BusWidth);
+
+ return Status;
+}
+
+/**
+ Switch the high speed timing according to request.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 4.7 and
+ SD Host Controller Simplified Spec 3.0 section Figure 2-29 for details.
+
+ @param[in] PciIo A pointer to the EFI_PCI_IO_PROTOCOL instance.
+ @param[in] PassThru A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+ @param[in] Rca The relative device address to be assigned.
+ @param[in] S18A The boolean to show if it's a UHS-I SD card.
+ @param[in] BusWidths The bus width of the SD card.
+
+ @retval EFI_SUCCESS The operation is done correctly.
+ @retval Others The operation fails.
+
+**/
+EFI_STATUS
+SdCardSetBusMode (
+ IN EFI_PCI_IO_PROTOCOL *PciIo,
+ IN EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru,
+ IN UINT8 Slot,
+ IN UINT16 Rca,
+ IN BOOLEAN S18A,
+ IN UINT32 BusWidths
+ )
+{
+ EFI_STATUS Status;
+ DW_MMC_HC_SLOT_CAP *Capability;
+ UINT32 ClockFreq;
+ UINT8 AccessMode;
+ UINT8 SwitchResp[64];
+ DW_MMC_HC_PRIVATE_DATA *Private;
+ BOOLEAN IsDdr;
+
+ Private = DW_MMC_HC_PRIVATE_FROM_THIS (PassThru);
+
+ Capability = &Private->Capability[Slot];
+
+ if ((Capability->BusWidth == 1) || (Capability->BusWidth == 4)) {
+ BusWidths &= Capability[Slot].BusWidth;
+ } else {
+ DEBUG ((DEBUG_ERROR, "SdCardSetBusMode: BusWidths (%d) in capability are wrong\n", Capability->BusWidth));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (BusWidths == 0) {
+ DEBUG ((DEBUG_ERROR, "SdCardSetBusMode: Get wrong BusWidths:%d\n", BusWidths));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Private->Capability[Slot].Ddr50) {
+ IsDdr = TRUE;
+ } else {
+ IsDdr = FALSE;
+ }
+
+ Status = SdCardSwitchBusWidth (PciIo, PassThru, Slot, Rca, IsDdr, BusWidths);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SdCardSetBusMode: Executing SdCardSwitchBusWidth fails with %r\n", Status));
+ return Status;
+ }
+
+ //
+ // Get the supported bus speed from SWITCH cmd return data group #1.
+ //
+ Status = SdCardSwitch (PassThru, Slot, 0xF, 0xF, 0xF, 0xF, FALSE, SwitchResp);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ //
+ // Calculate supported bus speed/bus width/clock frequency by host and device capability.
+ //
+ ClockFreq = 0;
+ if (S18A && (Capability->Sdr104 != 0) && ((SwitchResp[13] & BIT3) != 0)) {
+ ClockFreq = 208;
+ AccessMode = 3;
+ } else if (S18A && (Capability->Sdr50 != 0) && ((SwitchResp[13] & BIT2) != 0)) {
+ ClockFreq = 100;
+ AccessMode = 2;
+ } else if (S18A && (Capability->Ddr50 != 0) && ((SwitchResp[13] & BIT4) != 0)) {
+ ClockFreq = 50;
+ AccessMode = 4;
+ } else if ((SwitchResp[13] & BIT1) != 0) {
+ ClockFreq = 50;
+ AccessMode = 1;
+ } else {
+ ClockFreq = 25;
+ AccessMode = 0;
+ }
+
+ Status = SdCardSwitch (PassThru, Slot, AccessMode, 0xF, 0xF, 0xF, TRUE, SwitchResp);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ if ((SwitchResp[16] & 0xF) != AccessMode) {
+ DEBUG ((DEBUG_ERROR, "SdCardSetBusMode: Switch to AccessMode %d ClockFreq %d fails! The Switch response is 0x%1x\n", AccessMode, ClockFreq, SwitchResp[16] & 0xF));
+ return EFI_DEVICE_ERROR;
+ }
+
+ DEBUG ((DEBUG_INFO, "SdCardSetBusMode: Switch to AccessMode %d ClockFreq %d \n", AccessMode, ClockFreq));
+
+ Status = DwMmcHcClockSupply (PciIo, Slot, ClockFreq * 1000, *Capability);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ return Status;
+}
+
+/**
+ Execute SD device identification procedure.
+
+ Refer to SD Physical Layer Simplified Spec 4.1 Section 3.6 for details.
+
+ @param[in] Private A pointer to the DW_MMC_HC_PRIVATE_DATA instance.
+ @param[in] Slot The slot number of the SD card to send the command to.
+
+ @retval EFI_SUCCESS There is a SD card.
+ @retval Others There is not a SD card.
+
+**/
+EFI_STATUS
+SdCardIdentification (
+ IN DW_MMC_HC_PRIVATE_DATA *Private,
+ IN UINT8 Slot
+ )
+{
+ EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ EFI_SD_MMC_PASS_THRU_PROTOCOL *PassThru;
+ UINT32 Ocr;
+ UINT16 Rca;
+ BOOLEAN Xpc;
+ BOOLEAN S18r;
+ UINT64 MaxCurrent;
+ SD_SCR Scr;
+ SD_CSD Csd;
+
+ PciIo = Private->PciIo;
+ PassThru = &Private->PassThru;
+ //
+ // 1. Send Cmd0 to the device
+ //
+ Status = SdCardReset (PassThru, Slot);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "SdCardIdentification: Executing Cmd0 fails with %r\n", Status));
+ return Status;
+ }
+ MicroSecondDelay (10000);
+ //
+ // 2. Send Cmd8 to the device
+ //
+ Status = SdCardVoltageCheck (PassThru, Slot, 0x1, 0xFF);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "SdCardIdentification: Executing Cmd8 fails with %r\n", Status));
+ return Status;
+ }
+ //
+ // 3. Send Acmd41 with voltage window 0 to the device
+ //
+ Status = SdCardSendOpCond (PassThru, Slot, 0, 0, FALSE, FALSE, FALSE, &Ocr);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "SdCardIdentification: Executing SdCardSendOpCond fails with %r\n", Status));
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (Private->Capability[Slot].Voltage33 != 0) {
+ //
+ // Support 3.3V
+ //
+ MaxCurrent = ((UINT32)Private->MaxCurrent[Slot] & 0xFF) * 4;
+ S18r = FALSE;
+ } else if (Private->Capability[Slot].Voltage30 != 0) {
+ //
+ // Support 3.0V
+ //
+ MaxCurrent = (((UINT32)Private->MaxCurrent[Slot] >> 8) & 0xFF) * 4;
+ S18r = FALSE;
+ } else if (Private->Capability[Slot].Voltage18 != 0) {
+ //
+ // Support 1.8V
+ //
+ MaxCurrent = (((UINT32)Private->MaxCurrent[Slot] >> 16) & 0xFF) * 4;
+ S18r = TRUE;
+ } else {
+ ASSERT (FALSE);
+ return EFI_DEVICE_ERROR;
+ }
+
+ if (MaxCurrent >= 150) {
+ Xpc = TRUE;
+ } else {
+ Xpc = FALSE;
+ }
+
+ //
+ // 4. Repeatly send Acmd41 with supply voltage window to the device.
+ // Note here we only support the cards complied with SD physical
+ // layer simplified spec version 2.0 and version 3.0 and above.
+ //
+ do {
+ Status = SdCardSendOpCond (PassThru, Slot, 0, Ocr, S18r, Xpc, TRUE, &Ocr);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SdCardIdentification: SdCardSendOpCond fails with %r Ocr %x, S18r %x, Xpc %x\n", Status, Ocr, S18r, Xpc));
+ return EFI_DEVICE_ERROR;
+ }
+ } while ((Ocr & BIT31) == 0);
+
+ Status = SdCardAllSendCid (PassThru, Slot);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SdCardIdentification: Executing SdCardAllSendCid fails with %r\n", Status));
+ return Status;
+ }
+
+ Status = SdCardSetRca (PassThru, Slot, &Rca);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SdCardIdentification: Executing SdCardSetRca fails with %r\n", Status));
+ return Status;
+ }
+
+ Status = SdCardGetCsd (PassThru, Slot, Rca, &Csd);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SdCardIdentification: Executing SdCardGetCsd fails with %r\n", Status));
+ return Status;
+ }
+
+ Status = SdCardSelect (PassThru, Slot, Rca);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SdCardIdentification: Selecting card fails with %r\n", Status));
+ return Status;
+ }
+
+ Status = SdCardGetScr (PassThru, Slot, Rca, &Scr);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SdCardIdentification: Executing SdCardGetScr fails with %r\n", Status));
+ return Status;
+ }
+
+ //
+ // Enter Data Tranfer Mode.
+ //
+ DEBUG ((DEBUG_INFO, "SdCardIdentification: Found a SD device at slot [%d]\n", Slot));
+ Private->Slot[Slot].CardType = SdCardType;
+
+ Status = SdCardSetBusMode (PciIo, PassThru, Slot, Rca, S18r, Scr.SdBusWidths);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Private->Slot[Slot].Initialized = TRUE;
+
+ return Status;
+}
diff --git a/EmbeddedPkg/Include/Protocol/PlatformDwMmc.h b/EmbeddedPkg/Include/Protocol/PlatformDwMmc.h
new file mode 100644
index 000000000000..54a44928a7e1
--- /dev/null
+++ b/EmbeddedPkg/Include/Protocol/PlatformDwMmc.h
@@ -0,0 +1,79 @@
+/** @file
+
+ Copyright (c) 2018, Linaro. All rights reserved.
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __PLATFORM_DW_MMC_H__
+#define __PLATFORM_DW_MMC_H__
+
+typedef enum {
+ RemovableSlot,
+ EmbeddedSlot,
+ SharedBusSlot,
+ UnknownSlot
+} EFI_SD_MMC_SLOT_TYPE;
+
+typedef enum {
+ UnknownCardType,
+ SdCardType,
+ SdioCardType,
+ MmcCardType,
+ EmmcCardType
+} SD_MMC_CARD_TYPE;
+
+typedef struct {
+ UINT32 DefaultSpeed:1; // bit 0
+ UINT32 HighSpeed:1; // bit 1
+ UINT32 Sdr12:1; // bit 2
+ UINT32 Sdr25:1; // bit 3
+ UINT32 Sdr50:1; // bit 4
+ UINT32 Sdr104:1; // bit 5
+ UINT32 Ddr50:1; // bit 6
+ UINT32 SysBus64:1; // bit 7
+ UINT32 BusWidth:4; // bit 11:8
+ UINT32 SlotType:2; // bit 13:12
+ UINT32 CardType:3; // bit 16:14
+ UINT32 Voltage18:1; // bit 17
+ UINT32 Voltage30:1; // bit 18
+ UINT32 Voltage33:1; // bit 19
+ UINT32 BaseClkFreq;
+ EFI_HANDLE Controller;
+} DW_MMC_HC_SLOT_CAP;
+
+//
+// Protocol interface structure
+//
+typedef struct _PLATFORM_DW_MMC_PROTOCOL PLATFORM_DW_MMC_PROTOCOL;
+
+typedef
+EFI_STATUS
+(EFIAPI *PLATFORM_DW_MMC_GET_CAPABILITY) (
+ IN EFI_HANDLE Controller,
+ IN UINT8 Slot,
+ OUT DW_MMC_HC_SLOT_CAP *Capability
+ );
+
+typedef
+BOOLEAN
+(EFIAPI *PLATFORM_DW_MMC_CARD_DETECT) (
+ IN EFI_HANDLE Controller,
+ IN UINT8 Slot
+ );
+
+struct _PLATFORM_DW_MMC_PROTOCOL {
+ PLATFORM_DW_MMC_GET_CAPABILITY GetCapability;
+ PLATFORM_DW_MMC_CARD_DETECT CardDetect;
+};
+
+extern EFI_GUID gPlatformDwMmcProtocolGuid;
+
+#endif /* __PLATFORM_DW_MMC_H__ */
--
2.7.4
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2018-04-28 5:24 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-04-28 5:23 [PATCH 1/1] EmbeddedPkg: add DwMmcHcDxe driver Haojian Zhuang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox