* [PATCH edk2-platforms v3 0/6] enable virtual keyboard
@ 2018-05-10 2:17 Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver Haojian Zhuang
` (5 more replies)
0 siblings, 6 replies; 7+ messages in thread
From: Haojian Zhuang @ 2018-05-10 2:17 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Changelog:
v3:
* Remove ADC and boardid, since it's not really used yet.
* Add more comments.
v2:
* Split HiKeyDxe & HiKey960Dxe into smaller patches.
* Replace hardcoding register with macro.
v1:
* Enable GPIO driver.
* Enable virtual keyboard driver.
Haojian Zhuang (6):
Platform/Hisilicon/HiKey960: add gpio platform driver
Platform/HiKey960: do basic initialization
Platform/HiKey960: enable virtual keyboard
Platform/Hisilicon/HiKey: add gpio platform driver
Platform/HiKey: do basic initialization on hikey
Platform/HiKey: enable virtual keyboard
Platform/Hisilicon/HiKey/HiKey.dsc | 8 +
Platform/Hisilicon/HiKey/HiKey.fdf | 8 +
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c | 217 ++++++++++++++++
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf | 45 ++++
.../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c | 74 ++++++
.../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf | 36 +++
Platform/Hisilicon/HiKey960/HiKey960.dsc | 8 +
Platform/Hisilicon/HiKey960/HiKey960.fdf | 8 +
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 275 +++++++++++++++++++++
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h | 94 +++++++
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 48 ++++
.../HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c | 83 +++++++
.../HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf | 35 +++
Silicon/Hisilicon/Hi3660/Hi3660.dec | 32 +++
Silicon/Hisilicon/Hi3660/Include/Hi3660.h | 175 +++++++++++++
Silicon/Hisilicon/Hi3660/Include/Hkadc.h | 68 +++++
Silicon/Hisilicon/Hi6220/Include/Hi6220.h | 6 +
Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h | 50 ++++
18 files changed, 1270 insertions(+)
create mode 100644 Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
create mode 100644 Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
create mode 100644 Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c
create mode 100644 Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
create mode 100644 Silicon/Hisilicon/Hi3660/Hi3660.dec
create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hi3660.h
create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hkadc.h
create mode 100644 Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
--
2.7.4
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH edk2-platforms v3 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver
2018-05-10 2:17 [PATCH edk2-platforms v3 0/6] enable virtual keyboard Haojian Zhuang
@ 2018-05-10 2:17 ` Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 2/6] Platform/HiKey960: do basic initialization Haojian Zhuang
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Haojian Zhuang @ 2018-05-10 2:17 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Add gpio platform driver to enable GPIO in HiKey960 platform.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/HiKey960/HiKey960.dsc | 1 +
Platform/Hisilicon/HiKey960/HiKey960.fdf | 1 +
.../HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c | 83 ++++++++++++++++++++++
.../HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf | 35 +++++++++
4 files changed, 120 insertions(+)
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc
index 36f43956ab40..3da1b8556321 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.dsc
+++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc
@@ -179,6 +179,7 @@ [Components.common]
#
# GPIO
#
+ Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf
index 655032a36c53..162dbaaf2646 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.fdf
+++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf
@@ -120,6 +120,7 @@ [FV.FvMain]
#
# GPIO
#
+ INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
new file mode 100644
index 000000000000..b196455072cc
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
@@ -0,0 +1,83 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+
+GPIO_CONTROLLER gGpioDevice[] = {
+ //
+ // { base address, gpio index, gpio count }
+ //
+ { 0xe8a0b000, 0, 8 }, // GPIO0
+ { 0xe8a0c000, 8, 8 }, // GPIO1
+ { 0xe8a0d000, 16, 8 }, // GPIO2
+ { 0xe8a0e000, 24, 8 }, // GPIO3
+ { 0xe8a0f000, 32, 8 }, // GPIO4
+ { 0xe8a10000, 40, 8 }, // GPIO5
+ { 0xe8a11000, 48, 8 }, // GPIO6
+ { 0xe8a12000, 56, 8 }, // GPIO7
+ { 0xe8a13000, 64, 8 }, // GPIO8
+ { 0xe8a14000, 72, 8 }, // GPIO9
+ { 0xe8a15000, 80, 8 }, // GPIO10
+ { 0xe8a16000, 88, 8 }, // GPIO11
+ { 0xe8a17000, 96, 8 }, // GPIO12
+ { 0xe8a18000, 104, 8 }, // GPIO13
+ { 0xe8a19000, 112, 8 }, // GPIO14
+ { 0xe8a1a000, 120, 8 }, // GPIO15
+ { 0xe8a1b000, 128, 8 }, // GPIO16
+ { 0xe8a1c000, 136, 8 }, // GPIO17
+ { 0xff3b4000, 144, 8 }, // GPIO18
+ { 0xff3b5000, 152, 8 }, // GPIO19
+ { 0xe8a1f000, 160, 8 }, // GPIO20
+ { 0xe8a20000, 168, 8 }, // GPIO21
+ { 0xfff0b000, 176, 8 }, // GPIO22
+ { 0xfff0c000, 184, 8 }, // GPIO23
+ { 0xfff0d000, 192, 8 }, // GPIO24
+ { 0xfff0e000, 200, 8 }, // GPIO25
+ { 0xfff0f000, 208, 8 }, // GPIO26
+ { 0xfff10000, 216, 8 }, // GPIO27
+ { 0xfff1d000, 224, 8 }, // GPIO28
+};
+
+PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = {
+ //
+ // { global gpio count, gpio controller count, GPIO_CONTROLLER }
+ //
+ 232, 29, gGpioDevice
+};
+
+EFI_STATUS
+EFIAPI
+HiKey960GpioEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ // Install the Embedded Platform GPIO Protocol onto a new handle
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gPlatformGpioProtocolGuid, &gPlatformGpioDevice,
+ NULL
+ );
+ if (EFI_ERROR(Status)) {
+ Status = EFI_OUT_OF_RESOURCES;
+ }
+
+ return Status;
+}
diff --git a/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
new file mode 100644
index 000000000000..5ea3747321d8
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
@@ -0,0 +1,35 @@
+#
+# Copyright (c) 2018, Linaro. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001a
+ BASE_NAME = HiKey960GpioDxe
+ FILE_GUID = 6aa12592-7e36-4aec-acf8-2ac2fd13815c
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKey960GpioEntryPoint
+
+[Sources]
+ HiKey960GpioDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+
+[Protocols]
+ gPlatformGpioProtocolGuid
+
+[Depex]
+ TRUE
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH edk2-platforms v3 2/6] Platform/HiKey960: do basic initialization
2018-05-10 2:17 [PATCH edk2-platforms v3 0/6] enable virtual keyboard Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver Haojian Zhuang
@ 2018-05-10 2:17 ` Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 3/6] Platform/HiKey960: enable virtual keyboard Haojian Zhuang
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Haojian Zhuang @ 2018-05-10 2:17 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Do some basic initliazation on peripherals, such as pins and
regulators.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/HiKey960/HiKey960.dsc | 2 +
Platform/Hisilicon/HiKey960/HiKey960.fdf | 2 +
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 179 +++++++++++++++++++++
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h | 91 +++++++++++
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 47 ++++++
Silicon/Hisilicon/Hi3660/Hi3660.dec | 32 ++++
Silicon/Hisilicon/Hi3660/Include/Hi3660.h | 175 ++++++++++++++++++++
Silicon/Hisilicon/Hi3660/Include/Hkadc.h | 68 ++++++++
8 files changed, 596 insertions(+)
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
create mode 100644 Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
create mode 100644 Silicon/Hisilicon/Hi3660/Hi3660.dec
create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hi3660.h
create mode 100644 Silicon/Hisilicon/Hi3660/Include/Hkadc.h
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc
index 3da1b8556321..6cc1c1edf453 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.dsc
+++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc
@@ -182,6 +182,8 @@ [Components.common]
Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+
#
# USB Host Support
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf
index 162dbaaf2646..b7d70b010598 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.fdf
+++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf
@@ -123,6 +123,8 @@ [FV.FvMain]
INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ INF Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+
#
# USB Host Support
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
new file mode 100644
index 000000000000..154996026737
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
@@ -0,0 +1,179 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include "HiKey960Dxe.h"
+
+STATIC UINTN mBoardId;
+
+STATIC
+VOID
+InitSdCard (
+ IN VOID
+ )
+{
+ UINT32 Data;
+
+ //
+ // LDO16
+ //
+ Data = MmioRead32 (PMU_REG_BASE + (0x79 << 2)) & 7;
+ Data |= 6;
+ MmioWrite32 (PMU_REG_BASE + (0x79 << 2), Data);
+ MmioOr32 (PMU_REG_BASE + (0x78 << 2), 2);
+ //
+ // wait regulator stable
+ //
+ MicroSecondDelay (100);
+
+ //
+ // LDO9
+ //
+ Data = MmioRead32 (PMU_REG_BASE + (0x6b << 2)) & 7;
+ Data |= 5;
+ MmioWrite32 (PMU_REG_BASE + (0x6b << 2), Data);
+ MmioOr32 (PMU_REG_BASE + (0x6a << 2), 2);
+ //
+ // wait regulator stable
+ //
+ MicroSecondDelay (100);
+
+ //
+ // GPIO203
+ //
+ MmioWrite32 (0xfff11000 + (24 << 2), 0); // GPIO function
+
+ //
+ // SD pinmux
+ //
+ MmioWrite32 (IOMG_MMC0_000_REG, IOMG_FUNC1); // SD_CLK
+ MmioWrite32 (IOMG_MMC0_001_REG, IOMG_FUNC1); // SD_CMD
+ MmioWrite32 (IOMG_MMC0_002_REG, IOMG_FUNC1); // SD_DATA0
+ MmioWrite32 (IOMG_MMC0_003_REG, IOMG_FUNC1); // SD_DATA1
+ MmioWrite32 (IOMG_MMC0_004_REG, IOMG_FUNC1); // SD_DATA2
+ MmioWrite32 (IOMG_MMC0_005_REG, IOMG_FUNC1); // SD_DATA3
+ MmioWrite32 (IOCG_MMC0_000_REG, IOCG_DRIVE (15)); // SD_CLK float with 32mA
+ MmioWrite32 (IOCG_MMC0_001_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_CMD
+ MmioWrite32 (IOCG_MMC0_002_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA0
+ MmioWrite32 (IOCG_MMC0_003_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA1
+ MmioWrite32 (IOCG_MMC0_004_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA2
+ MmioWrite32 (IOCG_MMC0_005_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA3
+
+ do {
+ MmioOr32 (CRG_REG_BASE + 0xb8, (1 << 6) | (1 << 6 << 16) | (0 << 4) | (3 << 4 << 16));
+ Data = MmioRead32 (CRG_REG_BASE + 0xb8);
+ } while ((Data & ((1 << 6) | (3 << 4))) != ((1 << 6) | (0 << 4)));
+
+ //
+ // Unreset SD controller
+ //
+ MmioWrite32 (CRG_PERRSTDIS4, PERRSTEN4_SD);
+ do {
+ Data = MmioRead32 (CRG_PERRSTSTAT4);
+ } while ((Data & PERRSTEN4_SD) == PERRSTEN4_SD);
+ //
+ // Enable SD controller clock
+ //
+ MmioOr32 (CRG_PEREN0, PEREN0_GT_HCLK_SD);
+ MmioOr32 (CRG_PEREN4, PEREN4_GT_CLK_SD);
+ do {
+ Data = MmioRead32 (CRG_PERCLKEN4);
+ } while ((Data & PEREN4_GT_CLK_SD) != PEREN4_GT_CLK_SD);
+}
+
+VOID
+InitPeripherals (
+ IN VOID
+ )
+{
+ //
+ // Enable FPLL0
+ //
+ MmioOr32 (SCTRL_SCFPLLCTRL0, SCTRL_SCFPLLCTRL0_FPLL0_EN);
+
+ InitSdCard ();
+
+ //
+ // Enable wifi clock
+ //
+ MmioOr32 (PMIC_HARDWARE_CTRL0, PMIC_HARDWARE_CTRL0_WIFI_CLK);
+ MmioOr32 (PMIC_OSC32K_ONOFF_CTRL, PMIC_OSC32K_ONOFF_CTRL_EN_32K);
+}
+
+/**
+ Notification function of the event defined as belonging to the
+ EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in
+ the entry point of the driver.
+
+ This function is called when an event belonging to the
+ EFI_END_OF_DXE_EVENT_GROUP_GUID event group is signalled. Such an
+ event is signalled once at the end of the dispatching of all
+ drivers (end of the so called DXE phase).
+
+ @param[in] Event Event declared in the entry point of the driver whose
+ notification function is being invoked.
+ @param[in] Context NULL
+**/
+STATIC
+VOID
+OnEndOfDxe (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ UINT32 BootMode;
+
+ BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK;
+ if (BootMode == BOOT_MODE_RECOVERY) {
+ SerialPortWrite ((UINT8 *)"WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\r\n", 48);
+ SerialPortWrite ((UINT8 *)"Switch to normal boot mode, then reboot to boot kernel.\r\n", 57);
+ }
+}
+
+EFI_STATUS
+EFIAPI
+HiKey960EntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT EndOfDxeEvent;
+
+ Status = InitBoardId (&mBoardId);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ InitPeripherals ();
+
+ //
+ // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group.
+ // The "OnEndOfDxe()" function is declared as the call back function.
+ // It will be called at the end of the DXE phase when an event of the
+ // same group is signalled to inform about the end of the DXE phase.
+ // Install the INSTALL_FDT_PROTOCOL protocol.
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ OnEndOfDxe,
+ NULL,
+ &gEfiEndOfDxeEventGroupGuid,
+ &EndOfDxeEvent
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return Status;
+}
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
new file mode 100644
index 000000000000..2e89d10e2723
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
@@ -0,0 +1,91 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HIKEY960DXE_H__
+#define __HIKEY960DXE_H__
+
+#include <Guid/EventGroup.h>
+
+#include <Hi3660.h>
+#include <Hkadc.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/IoLib.h>
+#include <Library/PcdLib.h>
+#include <Library/PrintLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#define ADC_ADCIN0 0
+#define ADC_ADCIN1 1
+#define ADC_ADCIN2 2
+
+#define HKADC_DATA_GRADE0 0
+#define HKADC_DATA_GRADE1 100
+#define HKADC_DATA_GRADE2 300
+#define HKADC_DATA_GRADE3 500
+#define HKADC_DATA_GRADE4 700
+#define HKADC_DATA_GRADE5 900
+#define HKADC_DATA_GRADE6 1100
+#define HKADC_DATA_GRADE7 1300
+#define HKADC_DATA_GRADE8 1500
+#define HKADC_DATA_GRADE9 1700
+#define HKADC_DATA_GRADE10 1800
+
+#define BOARDID_VALUE0 0
+#define BOARDID_VALUE1 1
+#define BOARDID_VALUE2 2
+#define BOARDID_VALUE3 3
+#define BOARDID_VALUE4 4
+#define BOARDID_VALUE5 5
+#define BOARDID_VALUE6 6
+#define BOARDID_VALUE7 7
+#define BOARDID_VALUE8 8
+#define BOARDID_VALUE9 9
+#define BOARDID_UNKNOWN 0xF
+
+#define BOARDID3_BASE 5
+
+#define HIKEY960_BOARDID_V1 5300
+#define HIKEY960_BOARDID_V2 5301
+
+#define HIKEY960_COMPATIBLE_LEDS_V1 "gpio-leds_v1"
+#define HIKEY960_COMPATIBLE_LEDS_V2 "gpio-leds_v2"
+#define HIKEY960_COMPATIBLE_HUB_V1 "hisilicon,gpio_hubv1"
+#define HIKEY960_COMPATIBLE_HUB_V2 "hisilicon,gpio_hubv2"
+
+#define ADB_REBOOT_ADDRESS 0x32100000
+#define ADB_REBOOT_BOOTLOADER 0x77665500
+#define ADB_REBOOT_NONE 0x77665501
+
+#define DETECT_SW_FASTBOOT 68 // GPIO8_4
+
+enum {
+ BOOT_MODE_RECOVERY = 0,
+ BOOT_MODE_NORMAL,
+ BOOT_MODE_MASK = 1,
+};
+
+typedef struct {
+ UINTN DataGrade;
+ UINTN BoardidValue;
+} HKADC_DATA;
+
+#endif /* __HIKEY960DXE_H__ */
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
new file mode 100644
index 000000000000..a1a7d005ce8b
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
@@ -0,0 +1,47 @@
+#
+# Copyright (c) 2018, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001a
+ BASE_NAME = HiKey960Dxe
+ FILE_GUID = 6d824b2c-640e-4643-b9f2-9c09e8bff429
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKey960EntryPoint
+
+[Sources.common]
+ HiKey960Dxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Hisilicon/Hi3660/Hi3660.dec
+
+[LibraryClasses]
+ BaseMemoryLib
+ CacheMaintenanceLib
+ DxeServicesTableLib
+ IoLib
+ PcdLib
+ TimerLib
+ UefiDriverEntryPoint
+ UefiLib
+
+[Protocols]
+ gEmbeddedGpioProtocolGuid
+
+[Guids]
+ gEfiEndOfDxeEventGroupGuid
+
+[Depex]
+ TRUE
diff --git a/Silicon/Hisilicon/Hi3660/Hi3660.dec b/Silicon/Hisilicon/Hi3660/Hi3660.dec
new file mode 100644
index 000000000000..5c69ac4f19b8
--- /dev/null
+++ b/Silicon/Hisilicon/Hi3660/Hi3660.dec
@@ -0,0 +1,32 @@
+#
+# Copyright (c) 2018, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ DEC_SPECIFICATION = 0x0001001a
+ PACKAGE_NAME = Hi3660
+ PACKAGE_GUID = e457ba7c-faba-4dea-b274-f5962d016c79
+ PACKAGE_VERSION = 0.1
+
+################################################################################
+#
+# Include Section - list of Include Paths that are provided by this package.
+# Comments are used for Keywords and Module Types.
+#
+# Supported Module Types:
+# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
+#
+################################################################################
+[Includes.common]
+ Include # Root include for the package
+
+[Guids.common]
+ gHi3660TokenSpaceGuid = { 0x4abc73fa, 0x8a49, 0x4d2c, { 0x95, 0x44, 0x17, 0x87, 0x29, 0x06, 0x20, 0xb4 } }
diff --git a/Silicon/Hisilicon/Hi3660/Include/Hi3660.h b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h
new file mode 100644
index 000000000000..58974b9dd408
--- /dev/null
+++ b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h
@@ -0,0 +1,175 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HI3660_H__
+#define __HI3660_H__
+
+#define HKADC_SSI_REG_BASE 0xE82B8000
+
+#define PCTRL_REG_BASE 0xE8A09000
+
+#define PCTRL_CTRL3 (PCTRL_REG_BASE + 0x010)
+#define PCTRL_CTRL24 (PCTRL_REG_BASE + 0x064)
+
+#define PCTRL_CTRL3_USB_TXCO_EN (1 << 1)
+#define PCTRL_CTRL24_USB3PHY_3MUX1_SEL (1 << 25)
+
+#define SCTRL_REG_BASE 0xFFF0A000
+
+#define SCTRL_SCFPLLCTRL0 (SCTRL_REG_BASE + 0x120)
+#define SCTRL_SCFPLLCTRL0_FPLL0_EN (1 << 0)
+
+#define SCTRL_BAK_DATA0 (SCTRL_REG_BASE + 0x40C)
+
+#define USB3OTG_BC_REG_BASE 0xFF200000
+
+#define USB3OTG_CTRL0 (USB3OTG_BC_REG_BASE + 0x000)
+#define USB3OTG_CTRL2 (USB3OTG_BC_REG_BASE + 0x008)
+#define USB3OTG_CTRL3 (USB3OTG_BC_REG_BASE + 0x00C)
+#define USB3OTG_CTRL4 (USB3OTG_BC_REG_BASE + 0x010)
+#define USB3OTG_CTRL6 (USB3OTG_BC_REG_BASE + 0x018)
+#define USB3OTG_CTRL7 (USB3OTG_BC_REG_BASE + 0x01C)
+#define USB3OTG_PHY_CR_STS (USB3OTG_BC_REG_BASE + 0x050)
+#define USB3OTG_PHY_CR_CTRL (USB3OTG_BC_REG_BASE + 0x054)
+
+#define USB3OTG_CTRL0_SC_USB3PHY_ABB_GT_EN (1 << 15)
+#define USB3OTG_CTRL2_TEST_POWERDOWN_SSP (1 << 1)
+#define USB3OTG_CTRL2_TEST_POWERDOWN_HSP (1 << 0)
+#define USB3OTG_CTRL3_VBUSVLDEXT (1 << 6)
+#define USB3OTG_CTRL3_VBUSVLDEXTSEL (1 << 5)
+#define USB3OTG_CTRL7_REF_SSP_EN (1 << 16)
+#define USB3OTG_PHY_CR_DATA_OUT(x) (((x) & 0xFFFF) << 1)
+#define USB3OTG_PHY_CR_ACK (1 << 0)
+#define USB3OTG_PHY_CR_DATA_IN(x) (((x) & 0xFFFF) << 4)
+#define USB3OTG_PHY_CR_WRITE (1 << 3)
+#define USB3OTG_PHY_CR_READ (1 << 2)
+#define USB3OTG_PHY_CR_CAP_DATA (1 << 1)
+#define USB3OTG_PHY_CR_CAP_ADDR (1 << 0)
+
+#define PMU_REG_BASE 0xFFF34000
+#define PMIC_HARDWARE_CTRL0 (PMU_REG_BASE + (0x0C5 << 2))
+#define PMIC_OSC32K_ONOFF_CTRL (PMU_REG_BASE + (0x0CC << 2))
+
+#define PMIC_HARDWARE_CTRL0_WIFI_CLK (1 << 5)
+#define PMIC_OSC32K_ONOFF_CTRL_EN_32K (1 << 1)
+
+
+#define CRG_REG_BASE 0xFFF35000
+
+#define CRG_PEREN0 (CRG_REG_BASE + 0x000)
+#define CRG_PEREN2 (CRG_REG_BASE + 0x020)
+#define CRG_PERDIS2 (CRG_REG_BASE + 0x024)
+#define CRG_PERCLKEN2 (CRG_REG_BASE + 0x028)
+#define CRG_PERSTAT2 (CRG_REG_BASE + 0x02C)
+#define CRG_PEREN4 (CRG_REG_BASE + 0x040)
+#define CRG_PERDIS4 (CRG_REG_BASE + 0x044)
+#define CRG_PERCLKEN4 (CRG_REG_BASE + 0x048)
+#define CRG_PERSTAT4 (CRG_REG_BASE + 0x04C)
+#define CRG_PERRSTEN2 (CRG_REG_BASE + 0x078)
+#define CRG_PERRSTDIS2 (CRG_REG_BASE + 0x07C)
+#define CRG_PERRSTSTAT2 (CRG_REG_BASE + 0x080)
+#define CRG_PERRSTEN3 (CRG_REG_BASE + 0x084)
+#define CRG_PERRSTDIS3 (CRG_REG_BASE + 0x088)
+#define CRG_PERRSTSTAT3 (CRG_REG_BASE + 0x08C)
+#define CRG_PERRSTEN4 (CRG_REG_BASE + 0x090)
+#define CRG_PERRSTDIS4 (CRG_REG_BASE + 0x094)
+#define CRG_PERRSTSTAT4 (CRG_REG_BASE + 0x098)
+#define CRG_ISOEN (CRG_REG_BASE + 0x144)
+#define CRG_ISODIS (CRG_REG_BASE + 0x148)
+#define CRG_ISOSTAT (CRG_REG_BASE + 0x14C)
+
+#define PERI_UFS_BIT (1 << 12)
+#define PERI_ARST_UFS_BIT (1 << 7)
+
+#define PEREN0_GT_HCLK_SD BIT30
+
+#define PEREN2_HKADCSSI BIT24
+
+#define PEREN4_GT_CLK_SD BIT17
+#define PEREN4_GT_ACLK_USB3OTG (1 << 1)
+#define PEREN4_GT_CLK_USB3OTG_REF (1 << 0)
+
+#define PERRSTEN2_HKADCSSI BIT24
+
+#define PERRSTEN4_SD BIT18
+
+#define PERRSTEN4_USB3OTG_MUX (1 << 8)
+#define PERRSTEN4_USB3OTG_AHBIF (1 << 7)
+#define PERRSTEN4_USB3OTG_32K (1 << 6)
+#define PERRSTEN4_USB3OTG (1 << 5)
+#define PERRSTEN4_USB3OTGPHY_POR (1 << 3)
+
+#define PERISOEN_USB_REFCLK_ISO_EN (1 << 25)
+
+#define CRG_CLKDIV16_OFFSET 0x0E8
+#define SC_DIV_UFSPHY_CFG_MASK (0x3 << 9)
+#define SC_DIV_UFSPHY_CFG(x) (((x) & 0x3) << 9)
+
+#define CRG_CLKDIV17_OFFSET 0x0EC
+#define SC_DIV_UFS_PERIBUS (1 << 14)
+
+#define IOMG_MMC0_REG_BASE 0xFF37E000
+#define IOMG_MMC0_000_REG (IOMG_MMC0_REG_BASE + 0x000)
+#define IOMG_MMC0_001_REG (IOMG_MMC0_REG_BASE + 0x004)
+#define IOMG_MMC0_002_REG (IOMG_MMC0_REG_BASE + 0x008)
+#define IOMG_MMC0_003_REG (IOMG_MMC0_REG_BASE + 0x00C)
+#define IOMG_MMC0_004_REG (IOMG_MMC0_REG_BASE + 0x010)
+#define IOMG_MMC0_005_REG (IOMG_MMC0_REG_BASE + 0x014)
+
+#define IOCG_MMC0_REG_BASE 0xFF37E800
+#define IOCG_MMC0_000_REG (IOCG_MMC0_REG_BASE + 0x000)
+#define IOCG_MMC0_001_REG (IOCG_MMC0_REG_BASE + 0x004)
+#define IOCG_MMC0_002_REG (IOCG_MMC0_REG_BASE + 0x008)
+#define IOCG_MMC0_003_REG (IOCG_MMC0_REG_BASE + 0x00C)
+#define IOCG_MMC0_004_REG (IOCG_MMC0_REG_BASE + 0x010)
+#define IOCG_MMC0_005_REG (IOCG_MMC0_REG_BASE + 0x014)
+
+#define IOMG_FUNC0 0
+#define IOMG_FUNC1 1
+#define IOCG_PULLUP BIT0
+#define IOCG_PULLDOWN BIT1
+#define IOCG_DRIVE(x) ((x) << 4)
+
+#define UFS_SYS_REG_BASE 0xFF3B1000
+
+#define UFS_SYS_PSW_POWER_CTRL_OFFSET 0x004
+#define UFS_SYS_PHY_ISO_EN_OFFSET 0x008
+#define UFS_SYS_HC_LP_CTRL_OFFSET 0x00C
+#define UFS_SYS_PHY_CLK_CTRL_OFFSET 0x010
+#define UFS_SYS_PSW_CLK_CTRL_OFFSET 0x014
+#define UFS_SYS_CLOCK_GATE_BYPASS_OFFSET 0x018
+#define UFS_SYS_RESET_CTRL_EN_OFFSET 0x01C
+#define UFS_SYS_MONITOR_HH_OFFSET 0x03C
+#define UFS_SYS_UFS_SYSCTRL_OFFSET 0x05C
+#define UFS_SYS_UFS_DEVICE_RESET_CTRL_OFFSET 0x060
+#define UFS_SYS_UFS_APB_ADDR_MASK_OFFSET 0x064
+
+#define BIT_UFS_PSW_ISO_CTRL (1 << 16)
+#define BIT_UFS_PSW_MTCMOS_EN (1 << 0)
+#define BIT_UFS_REFCLK_ISO_EN (1 << 16)
+#define BIT_UFS_PHY_ISO_CTRL (1 << 0)
+#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16)
+#define BIT_SYSCTRL_PWR_READY (1 << 8)
+#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24)
+#define MASK_SYSCTRL_REF_CLOCK_SEL (3 << 8)
+#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF)
+#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4)
+#define MASK_UFS_CLK_GATE_BYPASS (0x3F)
+#define BIT_SYSCTRL_LP_RESET_N (1 << 0)
+#define BIT_UFS_REFCLK_SRC_SE1 (1 << 0)
+#define MASK_UFS_SYSCTRL_BYPASS (0x3F << 16)
+#define MASK_UFS_DEVICE_RESET (1 << 16)
+#define BIT_UFS_DEVICE_RESET (1 << 0)
+
+#endif /* __HI3660_H__ */
diff --git a/Silicon/Hisilicon/Hi3660/Include/Hkadc.h b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h
new file mode 100644
index 000000000000..990c0928eaab
--- /dev/null
+++ b/Silicon/Hisilicon/Hi3660/Include/Hkadc.h
@@ -0,0 +1,68 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HKADC_H__
+#define __HKADC_H__
+
+#include <Hi3660.h>
+
+#define HKADC_DSP_START (HKADC_SSI_REG_BASE + 0x000)
+#define DSP_START_BIT BIT0
+
+#define HKADC_WR_NUM (HKADC_SSI_REG_BASE + 0x008)
+#define HKADC_DSP_START_CLR (HKADC_SSI_REG_BASE + 0x01C)
+#define HKADC_WR01_DATA (HKADC_SSI_REG_BASE + 0x020)
+
+#define WR1_WRITE_MODE BIT31
+#define WR1_READ_MODE (0 << 31)
+#define WR1_ADDR(x) (((x) & 0x7F) << 24)
+#define WR1_DATA(x) (((x) & 0xFF) << 16)
+#define WR0_WRITE_MODE BIT15
+#define WR0_READ_MODE (0 << 15)
+#define WR0_ADDR(x) (((x) & 0x7F) << 8)
+#define WR0_DATA(x) ((x) & 0xFF)
+
+#define HKADC_WR23_DATA (HKADC_SSI_REG_BASE + 0x024)
+#define HKADC_WR45_DATA (HKADC_SSI_REG_BASE + 0x028)
+#define HKADC_DELAY01 (HKADC_SSI_REG_BASE + 0x030)
+#define HKADC_DELAY23 (HKADC_SSI_REG_BASE + 0x034)
+#define HKADC_DELAY45 (HKADC_SSI_REG_BASE + 0x038)
+#define HKADC_DSP_RD2_DATA (HKADC_SSI_REG_BASE + 0x048)
+#define HKADC_DSP_RD3_DATA (HKADC_SSI_REG_BASE + 0x04C)
+
+// HKADC Internal Registers
+#define HKADC_CTRL_ADDR 0x00
+#define HKADC_START_ADDR 0x01
+#define HKADC_DATA1_ADDR 0x03 // high 8 bits
+#define HKADC_DATA0_ADDR 0x04 // low 8 bits
+#define HKADC_MODE_CFG 0x0A
+
+#define HKADC_VALUE_HIGH 0x0FF0
+#define HKADC_VALUE_LOW 0x000F
+#define HKADC_VALID_VALUE 0x0FFF
+
+#define HKADC_CHANNEL_MAX 15
+#define HKADC_VREF_1V8 1800
+#define HKADC_ACCURACY 0x0FFF
+
+#define HKADC_WR01_VALUE ((HKADC_START_ADDR << 24) | (0x1 << 16))
+#define HKADC_WR23_VALUE ((0x1 << 31) | (HKADC_DATA0_ADDR << 24) | (1 << 15) | (HKADC_DATA1_ADDR << 8))
+#define HKADC_WR45_VALUE (0x80)
+#define HKADC_CHANNEL0_DELAY01_VALUE ((0x0700 << 16) | 0xFFFF)
+#define HKADC_DELAY01_VALUE ((0x0700 << 16) | 0x0200)
+#define HKADC_DELAY23_VALUE ((0x00C8 << 16) | 0x00C8)
+#define START_DELAY_TIMEOUT 2000
+#define HKADC_WR_NUM_VALUE 4
+
+#endif /* __HKADC_H__ */
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH edk2-platforms v3 3/6] Platform/HiKey960: enable virtual keyboard
2018-05-10 2:17 [PATCH edk2-platforms v3 0/6] enable virtual keyboard Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 2/6] Platform/HiKey960: do basic initialization Haojian Zhuang
@ 2018-05-10 2:17 ` Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 4/6] Platform/Hisilicon/HiKey: add gpio platform driver Haojian Zhuang
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Haojian Zhuang @ 2018-05-10 2:17 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Enable virtual keyboard on HiKey960 platform. It checks two
conditions, such as pattern in memory and GPIO pin setting.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/HiKey960/HiKey960.dsc | 5 ++
Platform/Hisilicon/HiKey960/HiKey960.fdf | 5 ++
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 98 +++++++++++++++++++++-
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h | 3 +
.../Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 1 +
5 files changed, 111 insertions(+), 1 deletion(-)
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc
index 6cc1c1edf453..79e68754976d 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.dsc
+++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc
@@ -182,6 +182,11 @@ [Components.common]
Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ #
+ # Virtual Keyboard
+ #
+ EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf
index b7d70b010598..d65f77878575 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.fdf
+++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf
@@ -123,6 +123,11 @@ [FV.FvMain]
INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ #
+ # Virtual Keyboard
+ #
+ INF EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
INF Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
index 154996026737..6ac0d220cf58 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
@@ -14,7 +14,8 @@
#include "HiKey960Dxe.h"
-STATIC UINTN mBoardId;
+STATIC UINTN mBoardId;
+STATIC EMBEDDED_GPIO *mGpio;
STATIC
VOID
@@ -142,6 +143,94 @@ OnEndOfDxe (
EFI_STATUS
EFIAPI
+VirtualKeyboardRegister (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (
+ &gEmbeddedGpioProtocolGuid,
+ NULL,
+ (VOID **) &mGpio
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardReset (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ if (mGpio == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ //
+ // Configure GPIO68 as GPIO function
+ //
+ MmioWrite32 (0xe896c108, 0);
+ Status = mGpio->Set (mGpio, DETECT_SW_FASTBOOT, GPIO_MODE_INPUT);
+ return Status;
+}
+
+BOOLEAN
+EFIAPI
+VirtualKeyboardQuery (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ EFI_STATUS Status;
+ UINTN Value = 0;
+
+ if ((VirtualKey == NULL) || (mGpio == NULL)) {
+ return FALSE;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ goto Done;
+ } else {
+ Status = mGpio->Get (mGpio, DETECT_SW_FASTBOOT, &Value);
+ if (EFI_ERROR (Status) || (Value != 0)) {
+ return FALSE;
+ }
+ }
+Done:
+ VirtualKey->Signature = VIRTUAL_KEYBOARD_KEY_SIGNATURE;
+ VirtualKey->Key.ScanCode = SCAN_NULL;
+ VirtualKey->Key.UnicodeChar = L'f';
+ return TRUE;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardClear (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ if (VirtualKey == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ MmioWrite32 (ADB_REBOOT_ADDRESS, ADB_REBOOT_NONE);
+ WriteBackInvalidateDataCacheRange ((VOID *)ADB_REBOOT_ADDRESS, 4);
+ }
+ return EFI_SUCCESS;
+}
+
+PLATFORM_VIRTUAL_KBD_PROTOCOL mVirtualKeyboard = {
+ VirtualKeyboardRegister,
+ VirtualKeyboardReset,
+ VirtualKeyboardQuery,
+ VirtualKeyboardClear
+};
+
+EFI_STATUS
+EFIAPI
HiKey960EntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
@@ -175,5 +264,12 @@ HiKey960EntryPoint (
if (EFI_ERROR (Status)) {
return Status;
}
+
+ Status = gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gPlatformVirtualKeyboardProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &mVirtualKeyboard
+ );
return Status;
}
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
index 2e89d10e2723..2d5349888ed5 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
@@ -33,6 +33,9 @@
#include <Library/TimerLib.h>
#include <Library/UefiBootServicesTableLib.h>
+#include <Protocol/EmbeddedGpio.h>
+#include <Protocol/PlatformVirtualKeyboard.h>
+
#define ADC_ADCIN0 0
#define ADC_ADCIN1 1
#define ADC_ADCIN2 2
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
index a1a7d005ce8b..46a9a5803e3d 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
@@ -39,6 +39,7 @@ [LibraryClasses]
[Protocols]
gEmbeddedGpioProtocolGuid
+ gPlatformVirtualKeyboardProtocolGuid
[Guids]
gEfiEndOfDxeEventGroupGuid
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH edk2-platforms v3 4/6] Platform/Hisilicon/HiKey: add gpio platform driver
2018-05-10 2:17 [PATCH edk2-platforms v3 0/6] enable virtual keyboard Haojian Zhuang
` (2 preceding siblings ...)
2018-05-10 2:17 ` [PATCH edk2-platforms v3 3/6] Platform/HiKey960: enable virtual keyboard Haojian Zhuang
@ 2018-05-10 2:17 ` Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 5/6] Platform/HiKey: do basic initialization on hikey Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 6/6] Platform/HiKey: enable virtual keyboard Haojian Zhuang
5 siblings, 0 replies; 7+ messages in thread
From: Haojian Zhuang @ 2018-05-10 2:17 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Add gpio platform driver to enable GPIO in HiKey platform.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
.../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c | 74 ++++++++++++++++++++++
.../Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf | 36 +++++++++++
2 files changed, 110 insertions(+)
create mode 100644 Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c
create mode 100644 Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
diff --git a/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c
new file mode 100644
index 000000000000..be535f8f1903
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c
@@ -0,0 +1,74 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+
+GPIO_CONTROLLER gGpioDevice[] = {
+ //
+ // { base address, gpio index, gpio count }
+ //
+ { 0xf8011000, 0, 8 }, // GPIO0
+ { 0xf8012000, 8, 8 }, // GPIO1
+ { 0xf8013000, 16, 8 }, // GPIO2
+ { 0xf8014000, 24, 8 }, // GPIO3
+ { 0xf7020000, 32, 8 }, // GPIO4
+ { 0xf7021000, 40, 8 }, // GPIO5
+ { 0xf7022000, 48, 8 }, // GPIO6
+ { 0xf7023000, 56, 8 }, // GPIO7
+ { 0xf7024000, 64, 8 }, // GPIO8
+ { 0xf7025000, 72, 8 }, // GPIO9
+ { 0xf7026000, 80, 8 }, // GPIO10
+ { 0xf7027000, 88, 8 }, // GPIO11
+ { 0xf7028000, 96, 8 }, // GPIO12
+ { 0xf7029000, 104, 8 }, // GPIO13
+ { 0xf702a000, 112, 8 }, // GPIO14
+ { 0xf702b000, 120, 8 }, // GPIO15
+ { 0xf702c000, 128, 8 }, // GPIO16
+ { 0xf702d000, 136, 8 }, // GPIO17
+ { 0xf702e000, 144, 8 }, // GPIO18
+ { 0xf702f000, 152, 8 } // GPIO19
+};
+
+PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = {
+ //
+ // { global gpio count, gpio controller counter, GPIO_CONTROLLER }
+ //
+ 160, 20, gGpioDevice
+};
+
+EFI_STATUS
+EFIAPI
+HiKeyGpioEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ // Install the Embedded Platform GPIO Protocol onto a new handle
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gPlatformGpioProtocolGuid, &gPlatformGpioDevice,
+ NULL
+ );
+ if (EFI_ERROR(Status)) {
+ Status = EFI_OUT_OF_RESOURCES;
+ }
+
+ return Status;
+}
diff --git a/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
new file mode 100644
index 000000000000..2791b9f44cad
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
@@ -0,0 +1,36 @@
+#
+# Copyright (c) 2018, Linaro. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001a
+ BASE_NAME = HiKeyGpio
+ FILE_GUID = b51a851c-7bf7-463f-b261-cfb158b7f699
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKeyGpioEntryPoint
+
+[Sources.common]
+ HiKeyGpioDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gPlatformGpioProtocolGuid
+
+[Depex]
+ TRUE
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH edk2-platforms v3 5/6] Platform/HiKey: do basic initialization on hikey
2018-05-10 2:17 [PATCH edk2-platforms v3 0/6] enable virtual keyboard Haojian Zhuang
` (3 preceding siblings ...)
2018-05-10 2:17 ` [PATCH edk2-platforms v3 4/6] Platform/Hisilicon/HiKey: add gpio platform driver Haojian Zhuang
@ 2018-05-10 2:17 ` Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 6/6] Platform/HiKey: enable virtual keyboard Haojian Zhuang
5 siblings, 0 replies; 7+ messages in thread
From: Haojian Zhuang @ 2018-05-10 2:17 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Do some basic initialization on HiKey platform, such as pin
setting, regulators and making peripherals out of reset mode.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/HiKey/HiKey.dsc | 3 +
Platform/Hisilicon/HiKey/HiKey.fdf | 3 +
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c | 119 ++++++++++++++++++++++
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf | 40 ++++++++
Silicon/Hisilicon/Hi6220/Include/Hi6220.h | 6 ++
Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h | 50 +++++++++
6 files changed, 221 insertions(+)
create mode 100644 Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
create mode 100644 Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
create mode 100644 Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
diff --git a/Platform/Hisilicon/HiKey/HiKey.dsc b/Platform/Hisilicon/HiKey/HiKey.dsc
index 5c1604d7f689..5cc4ff27f01b 100644
--- a/Platform/Hisilicon/HiKey/HiKey.dsc
+++ b/Platform/Hisilicon/HiKey/HiKey.dsc
@@ -189,8 +189,11 @@ [Components.common]
#
# GPIO
#
+ Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
+
#
# MMC/SD
#
diff --git a/Platform/Hisilicon/HiKey/HiKey.fdf b/Platform/Hisilicon/HiKey/HiKey.fdf
index 2a5c5a4d6e79..39020d27dbcd 100644
--- a/Platform/Hisilicon/HiKey/HiKey.fdf
+++ b/Platform/Hisilicon/HiKey/HiKey.fdf
@@ -120,8 +120,11 @@ [FV.FvMain]
#
# GPIO
#
+ INF Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ INF Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
+
#
# Multimedia Card Interface
#
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
new file mode 100644
index 000000000000..19987e0b29c3
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
@@ -0,0 +1,119 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/UefiLib.h>
+
+#include <Hi6220.h>
+#include <Hi6220RegsPeri.h>
+
+#define SERIAL_NUMBER_SIZE 17
+#define SERIAL_NUMBER_BLOCK_SIZE EFI_PAGE_SIZE
+#define SERIAL_NUMBER_LBA 1024
+#define RANDOM_MAX 0x7FFFFFFFFFFFFFFF
+#define RANDOM_MAGIC 0x9A4DBEAF
+
+#define DETECT_J15_FASTBOOT 24 // GPIO3_0
+
+#define ADB_REBOOT_ADDRESS 0x05F01000
+#define ADB_REBOOT_BOOTLOADER 0x77665500
+#define ADB_REBOOT_NONE 0x77665501
+
+STATIC
+VOID
+UartInit (
+ IN VOID
+ )
+{
+ UINT32 Val;
+
+ /* make UART1 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART1);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART1);
+ /* make UART2 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART2);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART2);
+ /* make UART3 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART3);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART3);
+ /* make UART4 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART4);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART4);
+
+ /* make DW_MMC2 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS0, PERIPH_RST0_MMC2);
+
+ /* enable clock for BT/WIFI */
+ Val = MmioRead32 (PMUSSI_ONOFF8_REG) | PMUSSI_ONOFF8_EN_32KB;
+ MmioWrite32 (PMUSSI_ONOFF8_REG, Val);
+}
+
+STATIC
+VOID
+MtcmosInit (
+ IN VOID
+ )
+{
+ UINT32 Data;
+
+ /* enable MTCMOS for GPU */
+ MmioWrite32 (AO_CTRL_BASE + SC_PW_MTCMOS_EN0, PW_EN0_G3D);
+ do {
+ Data = MmioRead32 (AO_CTRL_BASE + SC_PW_MTCMOS_ACK_STAT0);
+ } while ((Data & PW_EN0_G3D) == 0);
+}
+
+EFI_STATUS
+HiKeyInitPeripherals (
+ IN VOID
+ )
+{
+ UINT32 Data, Bits;
+
+ /* make I2C0/I2C1/I2C2/SPI0 out of reset */
+ Bits = PERIPH_RST3_I2C0 | PERIPH_RST3_I2C1 | PERIPH_RST3_I2C2 | \
+ PERIPH_RST3_SSP;
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, Bits);
+
+ do {
+ Data = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_RSTSTAT3);
+ } while (Data & Bits);
+
+ UartInit ();
+ /* MTCMOS -- Multi-threshold CMOS */
+ MtcmosInit ();
+
+ /* Set DETECT_J15_FASTBOOT (GPIO24) pin as GPIO function */
+ MmioWrite32 (IOCG_084_REG, 0); /* configure GPIO24 as nopull */
+ MmioWrite32 (IOMG_080_REG, 0); /* configure GPIO24 as GPIO */
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+HiKeyEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = HiKeyInitPeripherals ();
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return Status;
+}
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
new file mode 100644
index 000000000000..34734391b45a
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
@@ -0,0 +1,40 @@
+#
+# Copyright (c) 2013 - 2014, ARM Ltd. All rights reserved.
+# Copyright (c) 2018, Linaro Ltd. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001a
+ BASE_NAME = HiKeyDxe
+ FILE_GUID = f567684b-1089-4214-8881-d64b20cbda2f
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKeyEntryPoint
+
+[Sources.common]
+ HiKeyDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ IoLib
+ UefiLib
+ UefiDriverEntryPoint
+
+[Guids]
+ gEfiEndOfDxeEventGroupGuid
+
+[Depex]
+ TRUE
diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h
index 203424adfc8b..9b2508955772 100644
--- a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h
+++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h
@@ -23,6 +23,12 @@
#define HI6220_PERIPH_BASE 0xF4000000
#define HI6220_PERIPH_SZ 0x05800000
+#define IOMG_BASE 0xF7010000
+#define IOMG_080_REG (IOMG_BASE + 0x140)
+
+#define IOCG_BASE 0xF7010800
+#define IOCG_084_REG (IOCG_BASE + 0x150)
+
#define PERI_CTRL_BASE 0xF7030000
#define SC_PERIPH_CTRL4 0x00C
#define CTRL4_FPGA_EXT_PHY_SEL BIT3
diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
new file mode 100644
index 000000000000..0db8af37d2d0
--- /dev/null
+++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
@@ -0,0 +1,50 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HI6220_REGS_PERI_H__
+#define __HI6220_REGS_PERI_H__
+
+#define SC_PERIPH_CLKEN3 0x230
+#define SC_PERIPH_RSTEN3 0x330
+#define SC_PERIPH_RSTDIS0 0x304
+#define SC_PERIPH_RSTDIS3 0x334
+#define SC_PERIPH_RSTSTAT3 0x338
+
+/* SC_PERIPH_RSTEN0/RSTDIS0/RSTSTAT0 */
+#define PERIPH_RST0_MMC2 (1 << 2)
+
+/* SC_PERIPH_RSTEN3/RSTDIS3/RSTSTAT3 */
+#define PERIPH_RST3_CSSYS (1 << 0)
+#define PERIPH_RST3_I2C0 (1 << 1)
+#define PERIPH_RST3_I2C1 (1 << 2)
+#define PERIPH_RST3_I2C2 (1 << 3)
+#define PERIPH_RST3_I2C3 (1 << 4)
+#define PERIPH_RST3_UART1 (1 << 5)
+#define PERIPH_RST3_UART2 (1 << 6)
+#define PERIPH_RST3_UART3 (1 << 7)
+#define PERIPH_RST3_UART4 (1 << 8)
+#define PERIPH_RST3_SSP (1 << 9)
+#define PERIPH_RST3_PWM (1 << 10)
+#define PERIPH_RST3_BLPWM (1 << 11)
+#define PERIPH_RST3_TSENSOR (1 << 12)
+#define PERIPH_RST3_DAPB (1 << 18)
+#define PERIPH_RST3_HKADC (1 << 19)
+#define PERIPH_RST3_CODEC_SSI (1 << 20)
+#define PERIPH_RST3_PMUSSI1 (1 << 22)
+
+#define PMUSSI_REG(x) (PMUSSI_BASE + ((x) << 2))
+#define PMUSSI_ONOFF8_REG (PMUSSI_BASE + (0x1c << 2))
+#define PMUSSI_ONOFF8_EN_32KB BIT6
+
+#endif /* __HI6220_REGS_PERI_H__ */
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH edk2-platforms v3 6/6] Platform/HiKey: enable virtual keyboard
2018-05-10 2:17 [PATCH edk2-platforms v3 0/6] enable virtual keyboard Haojian Zhuang
` (4 preceding siblings ...)
2018-05-10 2:17 ` [PATCH edk2-platforms v3 5/6] Platform/HiKey: do basic initialization on hikey Haojian Zhuang
@ 2018-05-10 2:17 ` Haojian Zhuang
5 siblings, 0 replies; 7+ messages in thread
From: Haojian Zhuang @ 2018-05-10 2:17 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Enable virtual keyboard on HiKey platform. It detects the pattern
in memory and GPIO pin setting, and simulates them into virtual
key.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/HiKey/HiKey.dsc | 5 ++
Platform/Hisilicon/HiKey/HiKey.fdf | 5 ++
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c | 98 ++++++++++++++++++++++++++
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf | 5 ++
4 files changed, 113 insertions(+)
diff --git a/Platform/Hisilicon/HiKey/HiKey.dsc b/Platform/Hisilicon/HiKey/HiKey.dsc
index 5cc4ff27f01b..83dd68a820b1 100644
--- a/Platform/Hisilicon/HiKey/HiKey.dsc
+++ b/Platform/Hisilicon/HiKey/HiKey.dsc
@@ -192,6 +192,11 @@ [Components.common]
Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ #
+ # Virtual Keyboard
+ #
+ EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey/HiKey.fdf b/Platform/Hisilicon/HiKey/HiKey.fdf
index 39020d27dbcd..2bca7232b6e5 100644
--- a/Platform/Hisilicon/HiKey/HiKey.fdf
+++ b/Platform/Hisilicon/HiKey/HiKey.fdf
@@ -123,6 +123,11 @@ [FV.FvMain]
INF Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ #
+ # Virtual Keyboard
+ #
+ INF EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
INF Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
index 19987e0b29c3..8f4f9157835c 100644
--- a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
@@ -12,10 +12,15 @@
*
**/
+#include <Library/CacheMaintenanceLib.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
+#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
+#include <Protocol/EmbeddedGpio.h>
+#include <Protocol/PlatformVirtualKeyboard.h>
+
#include <Hi6220.h>
#include <Hi6220RegsPeri.h>
@@ -31,6 +36,8 @@
#define ADB_REBOOT_BOOTLOADER 0x77665500
#define ADB_REBOOT_NONE 0x77665501
+STATIC EMBEDDED_GPIO *mGpio;
+
STATIC
VOID
UartInit (
@@ -104,6 +111,90 @@ HiKeyInitPeripherals (
EFI_STATUS
EFIAPI
+VirtualKeyboardRegister (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (
+ &gEmbeddedGpioProtocolGuid,
+ NULL,
+ (VOID **) &mGpio
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardReset (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ if (mGpio == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = mGpio->Set (mGpio, DETECT_J15_FASTBOOT, GPIO_MODE_INPUT);
+ return Status;
+}
+
+BOOLEAN
+EFIAPI
+VirtualKeyboardQuery (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ EFI_STATUS Status;
+ UINTN Value = 0;
+
+ if ((VirtualKey == NULL) || (mGpio == NULL)) {
+ return FALSE;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ goto Done;
+ } else {
+ Status = mGpio->Get (mGpio, DETECT_J15_FASTBOOT, &Value);
+ if (EFI_ERROR (Status) || (Value != 0)) {
+ return FALSE;
+ }
+ }
+Done:
+ VirtualKey->Signature = VIRTUAL_KEYBOARD_KEY_SIGNATURE;
+ VirtualKey->Key.ScanCode = SCAN_NULL;
+ VirtualKey->Key.UnicodeChar = L'f';
+ return TRUE;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardClear (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ if (VirtualKey == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ MmioWrite32 (ADB_REBOOT_ADDRESS, ADB_REBOOT_NONE);
+ WriteBackInvalidateDataCacheRange ((VOID *)ADB_REBOOT_ADDRESS, 4);
+ }
+ return EFI_SUCCESS;
+}
+
+PLATFORM_VIRTUAL_KBD_PROTOCOL mVirtualKeyboard = {
+ VirtualKeyboardRegister,
+ VirtualKeyboardReset,
+ VirtualKeyboardQuery,
+ VirtualKeyboardClear
+};
+
+EFI_STATUS
+EFIAPI
HiKeyEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
@@ -115,5 +206,12 @@ HiKeyEntryPoint (
if (EFI_ERROR (Status)) {
return Status;
}
+
+ Status = gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gPlatformVirtualKeyboardProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &mVirtualKeyboard
+ );
return Status;
}
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
index 34734391b45a..41aa7f8081ed 100644
--- a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
@@ -28,11 +28,16 @@ [Packages]
MdePkg/MdePkg.dec
[LibraryClasses]
+ CacheMaintenanceLib
DebugLib
IoLib
UefiLib
UefiDriverEntryPoint
+[Protocols]
+ gEmbeddedGpioProtocolGuid
+ gPlatformVirtualKeyboardProtocolGuid
+
[Guids]
gEfiEndOfDxeEventGroupGuid
--
2.7.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-05-10 2:17 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-05-10 2:17 [PATCH edk2-platforms v3 0/6] enable virtual keyboard Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 2/6] Platform/HiKey960: do basic initialization Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 3/6] Platform/HiKey960: enable virtual keyboard Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 4/6] Platform/Hisilicon/HiKey: add gpio platform driver Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 5/6] Platform/HiKey: do basic initialization on hikey Haojian Zhuang
2018-05-10 2:17 ` [PATCH edk2-platforms v3 6/6] Platform/HiKey: enable virtual keyboard Haojian Zhuang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox