* [PATCH v7 edk-platforms 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver
2018-05-31 3:10 [PATCH v7 edk-platforms 0/6] enable virtual keyboards Haojian Zhuang
@ 2018-05-31 3:10 ` Haojian Zhuang
2018-05-31 3:10 ` [PATCH v7 edk-platforms 2/6] Platform/HiKey960: do basic initialization Haojian Zhuang
` (4 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Haojian Zhuang @ 2018-05-31 3:10 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Add gpio platform driver to enable GPIO in HiKey960 platform.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
Platform/Hisilicon/HiKey960/HiKey960.dsc | 1 +
Platform/Hisilicon/HiKey960/HiKey960.fdf | 1 +
Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf | 35 +++++++++
Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c | 83 ++++++++++++++++++++
4 files changed, 120 insertions(+)
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc
index 36f43956ab40..3da1b8556321 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.dsc
+++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc
@@ -179,6 +179,7 @@ [Components.common]
#
# GPIO
#
+ Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf
index 655032a36c53..162dbaaf2646 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.fdf
+++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf
@@ -120,6 +120,7 @@ [FV.FvMain]
#
# GPIO
#
+ INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
new file mode 100644
index 000000000000..5ea3747321d8
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
@@ -0,0 +1,35 @@
+#
+# Copyright (c) 2018, Linaro. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001a
+ BASE_NAME = HiKey960GpioDxe
+ FILE_GUID = 6aa12592-7e36-4aec-acf8-2ac2fd13815c
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKey960GpioEntryPoint
+
+[Sources]
+ HiKey960GpioDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ UefiDriverEntryPoint
+
+[Protocols]
+ gPlatformGpioProtocolGuid
+
+[Depex]
+ TRUE
diff --git a/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
new file mode 100644
index 000000000000..b196455072cc
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.c
@@ -0,0 +1,83 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+
+GPIO_CONTROLLER gGpioDevice[] = {
+ //
+ // { base address, gpio index, gpio count }
+ //
+ { 0xe8a0b000, 0, 8 }, // GPIO0
+ { 0xe8a0c000, 8, 8 }, // GPIO1
+ { 0xe8a0d000, 16, 8 }, // GPIO2
+ { 0xe8a0e000, 24, 8 }, // GPIO3
+ { 0xe8a0f000, 32, 8 }, // GPIO4
+ { 0xe8a10000, 40, 8 }, // GPIO5
+ { 0xe8a11000, 48, 8 }, // GPIO6
+ { 0xe8a12000, 56, 8 }, // GPIO7
+ { 0xe8a13000, 64, 8 }, // GPIO8
+ { 0xe8a14000, 72, 8 }, // GPIO9
+ { 0xe8a15000, 80, 8 }, // GPIO10
+ { 0xe8a16000, 88, 8 }, // GPIO11
+ { 0xe8a17000, 96, 8 }, // GPIO12
+ { 0xe8a18000, 104, 8 }, // GPIO13
+ { 0xe8a19000, 112, 8 }, // GPIO14
+ { 0xe8a1a000, 120, 8 }, // GPIO15
+ { 0xe8a1b000, 128, 8 }, // GPIO16
+ { 0xe8a1c000, 136, 8 }, // GPIO17
+ { 0xff3b4000, 144, 8 }, // GPIO18
+ { 0xff3b5000, 152, 8 }, // GPIO19
+ { 0xe8a1f000, 160, 8 }, // GPIO20
+ { 0xe8a20000, 168, 8 }, // GPIO21
+ { 0xfff0b000, 176, 8 }, // GPIO22
+ { 0xfff0c000, 184, 8 }, // GPIO23
+ { 0xfff0d000, 192, 8 }, // GPIO24
+ { 0xfff0e000, 200, 8 }, // GPIO25
+ { 0xfff0f000, 208, 8 }, // GPIO26
+ { 0xfff10000, 216, 8 }, // GPIO27
+ { 0xfff1d000, 224, 8 }, // GPIO28
+};
+
+PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = {
+ //
+ // { global gpio count, gpio controller count, GPIO_CONTROLLER }
+ //
+ 232, 29, gGpioDevice
+};
+
+EFI_STATUS
+EFIAPI
+HiKey960GpioEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ // Install the Embedded Platform GPIO Protocol onto a new handle
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gPlatformGpioProtocolGuid, &gPlatformGpioDevice,
+ NULL
+ );
+ if (EFI_ERROR(Status)) {
+ Status = EFI_OUT_OF_RESOURCES;
+ }
+
+ return Status;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v7 edk-platforms 2/6] Platform/HiKey960: do basic initialization
2018-05-31 3:10 [PATCH v7 edk-platforms 0/6] enable virtual keyboards Haojian Zhuang
2018-05-31 3:10 ` [PATCH v7 edk-platforms 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver Haojian Zhuang
@ 2018-05-31 3:10 ` Haojian Zhuang
2018-05-31 21:01 ` Leif Lindholm
2018-05-31 3:10 ` [PATCH v7 edk-platforms 3/6] Platform/HiKey960: enable virtual keyboard Haojian Zhuang
` (3 subsequent siblings)
5 siblings, 1 reply; 10+ messages in thread
From: Haojian Zhuang @ 2018-05-31 3:10 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Do some basic initliazation on peripherals, such as pins and
regulators.
The hardcoding code is taken from non-open reference code.
Can't fix it for lack of documents.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Silicon/Hisilicon/Hi3660/Hi3660.dec | 32 +++
Platform/Hisilicon/HiKey960/HiKey960.dsc | 2 +
Platform/Hisilicon/HiKey960/HiKey960.fdf | 2 +
Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 47 +++++
Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h | 23 +++
Silicon/Hisilicon/Hi3660/Include/Hi3660.h | 195 ++++++++++++++++++
Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 212 ++++++++++++++++++++
7 files changed, 513 insertions(+)
diff --git a/Silicon/Hisilicon/Hi3660/Hi3660.dec b/Silicon/Hisilicon/Hi3660/Hi3660.dec
new file mode 100644
index 000000000000..72de61e0635c
--- /dev/null
+++ b/Silicon/Hisilicon/Hi3660/Hi3660.dec
@@ -0,0 +1,32 @@
+#
+# Copyright (c) 2018, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ DEC_SPECIFICATION = 0x0001001a
+ PACKAGE_NAME = Hi3660
+ PACKAGE_GUID = e457ba7c-faba-4dea-b274-f5962d016c79
+ PACKAGE_VERSION = 0.1
+
+################################################################################
+#
+# Include Section - list of Include Paths that are provided by this package.
+# Comments are used for Keywords and Module Types.
+#
+# Supported Module Types:
+# BASE SEC PEI_CORE PEIM DXE_CORE DXE_DRIVER DXE_RUNTIME_DRIVER DXE_SMM_DRIVER DXE_SAL_DRIVER UEFI_DRIVER UEFI_APPLICATION
+#
+################################################################################
+[Includes.common]
+ Include # Root include for the package
+
+[Guids.common]
+ gHi3660TokenSpaceGuid = { 0x4abc73fa, 0x8a49, 0x4d2c, { 0x95, 0x44, 0x17, 0x87, 0x29, 0x06, 0x20, 0xb4 } }
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc
index 3da1b8556321..6cc1c1edf453 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.dsc
+++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc
@@ -182,6 +182,8 @@ [Components.common]
Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+
#
# USB Host Support
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf
index 162dbaaf2646..b7d70b010598 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.fdf
+++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf
@@ -123,6 +123,8 @@ [FV.FvMain]
INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ INF Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+
#
# USB Host Support
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
new file mode 100644
index 000000000000..a1a7d005ce8b
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
@@ -0,0 +1,47 @@
+#
+# Copyright (c) 2018, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001a
+ BASE_NAME = HiKey960Dxe
+ FILE_GUID = 6d824b2c-640e-4643-b9f2-9c09e8bff429
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKey960EntryPoint
+
+[Sources.common]
+ HiKey960Dxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Hisilicon/Hi3660/Hi3660.dec
+
+[LibraryClasses]
+ BaseMemoryLib
+ CacheMaintenanceLib
+ DxeServicesTableLib
+ IoLib
+ PcdLib
+ TimerLib
+ UefiDriverEntryPoint
+ UefiLib
+
+[Protocols]
+ gEmbeddedGpioProtocolGuid
+
+[Guids]
+ gEfiEndOfDxeEventGroupGuid
+
+[Depex]
+ TRUE
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
new file mode 100644
index 000000000000..ae8bdd5c8140
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
@@ -0,0 +1,23 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HIKEY960DXE_H__
+#define __HIKEY960DXE_H__
+
+enum {
+ BOOT_MODE_RECOVERY = 0,
+ BOOT_MODE_MASK = 1,
+};
+
+#endif /* __HIKEY960DXE_H__ */
diff --git a/Silicon/Hisilicon/Hi3660/Include/Hi3660.h b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h
new file mode 100644
index 000000000000..5fbf32267657
--- /dev/null
+++ b/Silicon/Hisilicon/Hi3660/Include/Hi3660.h
@@ -0,0 +1,195 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HI3660_H__
+#define __HI3660_H__
+
+#define HKADC_SSI_REG_BASE 0xE82B8000
+
+#define PCTRL_REG_BASE 0xE8A09000
+
+#define PCTRL_CTRL3 (PCTRL_REG_BASE + 0x010)
+#define PCTRL_CTRL24 (PCTRL_REG_BASE + 0x064)
+
+#define PCTRL_CTRL3_USB_TXCO_EN (1 << 1)
+#define PCTRL_CTRL24_USB3PHY_3MUX1_SEL (1 << 25)
+
+#define SCTRL_REG_BASE 0xFFF0A000
+
+#define SCTRL_SCFPLLCTRL0 (SCTRL_REG_BASE + 0x120)
+#define SCTRL_SCFPLLCTRL0_FPLL0_EN (1 << 0)
+
+#define SCTRL_BAK_DATA0 (SCTRL_REG_BASE + 0x40C)
+
+#define USB3OTG_BC_REG_BASE 0xFF200000
+
+#define USB3OTG_CTRL0 (USB3OTG_BC_REG_BASE + 0x000)
+#define USB3OTG_CTRL2 (USB3OTG_BC_REG_BASE + 0x008)
+#define USB3OTG_CTRL3 (USB3OTG_BC_REG_BASE + 0x00C)
+#define USB3OTG_CTRL4 (USB3OTG_BC_REG_BASE + 0x010)
+#define USB3OTG_CTRL6 (USB3OTG_BC_REG_BASE + 0x018)
+#define USB3OTG_CTRL7 (USB3OTG_BC_REG_BASE + 0x01C)
+#define USB3OTG_PHY_CR_STS (USB3OTG_BC_REG_BASE + 0x050)
+#define USB3OTG_PHY_CR_CTRL (USB3OTG_BC_REG_BASE + 0x054)
+
+#define USB3OTG_CTRL0_SC_USB3PHY_ABB_GT_EN (1 << 15)
+#define USB3OTG_CTRL2_TEST_POWERDOWN_SSP (1 << 1)
+#define USB3OTG_CTRL2_TEST_POWERDOWN_HSP (1 << 0)
+#define USB3OTG_CTRL3_VBUSVLDEXT (1 << 6)
+#define USB3OTG_CTRL3_VBUSVLDEXTSEL (1 << 5)
+#define USB3OTG_CTRL7_REF_SSP_EN (1 << 16)
+#define USB3OTG_PHY_CR_DATA_OUT(x) (((x) & 0xFFFF) << 1)
+#define USB3OTG_PHY_CR_ACK (1 << 0)
+#define USB3OTG_PHY_CR_DATA_IN(x) (((x) & 0xFFFF) << 4)
+#define USB3OTG_PHY_CR_WRITE (1 << 3)
+#define USB3OTG_PHY_CR_READ (1 << 2)
+#define USB3OTG_PHY_CR_CAP_DATA (1 << 1)
+#define USB3OTG_PHY_CR_CAP_ADDR (1 << 0)
+
+#define PMU_REG_BASE 0xFFF34000
+#define PMIC_LDO9_VSET_REG (PMU_REG_BASE + (0x068 << 2))
+#define LDO9_VSET_MASK (7 << 0)
+
+#define PMIC_LDO16_ONOFF_ECO_REG (PMU_REG_BASE + (0x078 << 2))
+#define LDO16_ONOFF_ECO_LDO16_ENABLE BIT1
+#define LDO16_ONOFF_ECO_ECO_ENABLE BIT0
+
+#define PMIC_LDO16_VSET_REG (PMU_REG_BASE + (0x079 << 2))
+#define LDO16_VSET_MASK (7 << 0)
+
+#define PMIC_HARDWARE_CTRL0 (PMU_REG_BASE + (0x0C5 << 2))
+#define PMIC_OSC32K_ONOFF_CTRL (PMU_REG_BASE + (0x0CC << 2))
+
+#define PMIC_HARDWARE_CTRL0_WIFI_CLK (1 << 5)
+#define PMIC_OSC32K_ONOFF_CTRL_EN_32K (1 << 1)
+
+
+#define CRG_REG_BASE 0xFFF35000
+
+#define CRG_PEREN0 (CRG_REG_BASE + 0x000)
+#define CRG_PEREN2 (CRG_REG_BASE + 0x020)
+#define CRG_PERDIS2 (CRG_REG_BASE + 0x024)
+#define CRG_PERCLKEN2 (CRG_REG_BASE + 0x028)
+#define CRG_PERSTAT2 (CRG_REG_BASE + 0x02C)
+#define CRG_PEREN4 (CRG_REG_BASE + 0x040)
+#define CRG_PERDIS4 (CRG_REG_BASE + 0x044)
+#define CRG_PERCLKEN4 (CRG_REG_BASE + 0x048)
+#define CRG_PERSTAT4 (CRG_REG_BASE + 0x04C)
+#define CRG_PERRSTEN2 (CRG_REG_BASE + 0x078)
+#define CRG_PERRSTDIS2 (CRG_REG_BASE + 0x07C)
+#define CRG_PERRSTSTAT2 (CRG_REG_BASE + 0x080)
+#define CRG_PERRSTEN3 (CRG_REG_BASE + 0x084)
+#define CRG_PERRSTDIS3 (CRG_REG_BASE + 0x088)
+#define CRG_PERRSTSTAT3 (CRG_REG_BASE + 0x08C)
+#define CRG_PERRSTEN4 (CRG_REG_BASE + 0x090)
+#define CRG_PERRSTDIS4 (CRG_REG_BASE + 0x094)
+#define CRG_PERRSTSTAT4 (CRG_REG_BASE + 0x098)
+#define CRG_CLKDIV4 (CRG_REG_BASE + 0x0B8)
+#define CRG_ISOEN (CRG_REG_BASE + 0x144)
+#define CRG_ISODIS (CRG_REG_BASE + 0x148)
+#define CRG_ISOSTAT (CRG_REG_BASE + 0x14C)
+
+#define PERI_UFS_BIT (1 << 12)
+#define PERI_ARST_UFS_BIT (1 << 7)
+
+#define PEREN0_GT_HCLK_SD BIT30
+
+#define PEREN2_HKADCSSI BIT24
+
+#define PEREN4_GT_CLK_SD BIT17
+#define PEREN4_GT_ACLK_USB3OTG (1 << 1)
+#define PEREN4_GT_CLK_USB3OTG_REF (1 << 0)
+
+#define PERRSTEN2_HKADCSSI BIT24
+
+#define PERRSTEN4_SD BIT18
+
+#define PERRSTEN4_USB3OTG_MUX (1 << 8)
+#define PERRSTEN4_USB3OTG_AHBIF (1 << 7)
+#define PERRSTEN4_USB3OTG_32K (1 << 6)
+#define PERRSTEN4_USB3OTG (1 << 5)
+#define PERRSTEN4_USB3OTGPHY_POR (1 << 3)
+
+#define PERISOEN_USB_REFCLK_ISO_EN (1 << 25)
+
+#define CLKDIV4_SC_SEL_SD_MASK (7 << 4)
+#define CLKDIV4_SC_DIV_SD_MASK 0xf
+#define CLKDIV4_SC_MASK_SHIFT 16
+#define CLKDIV4_SC_SEL_SD(x) (((x) & 0x7) << 4)
+#define CLKDIV4_SC_DIV_SD(x) ((x) & 0xf)
+
+#define CRG_CLKDIV16_OFFSET 0x0E8
+#define SC_DIV_UFSPHY_CFG_MASK (0x3 << 9)
+#define SC_DIV_UFSPHY_CFG(x) (((x) & 0x3) << 9)
+
+#define CRG_CLKDIV17_OFFSET 0x0EC
+#define SC_DIV_UFS_PERIBUS (1 << 14)
+
+#define IOMG_MMC0_REG_BASE 0xFF37E000
+#define IOMG_MMC0_000_REG (IOMG_MMC0_REG_BASE + 0x000)
+#define IOMG_MMC0_001_REG (IOMG_MMC0_REG_BASE + 0x004)
+#define IOMG_MMC0_002_REG (IOMG_MMC0_REG_BASE + 0x008)
+#define IOMG_MMC0_003_REG (IOMG_MMC0_REG_BASE + 0x00C)
+#define IOMG_MMC0_004_REG (IOMG_MMC0_REG_BASE + 0x010)
+#define IOMG_MMC0_005_REG (IOMG_MMC0_REG_BASE + 0x014)
+
+#define IOCG_MMC0_REG_BASE 0xFF37E800
+#define IOCG_MMC0_000_REG (IOCG_MMC0_REG_BASE + 0x000)
+#define IOCG_MMC0_001_REG (IOCG_MMC0_REG_BASE + 0x004)
+#define IOCG_MMC0_002_REG (IOCG_MMC0_REG_BASE + 0x008)
+#define IOCG_MMC0_003_REG (IOCG_MMC0_REG_BASE + 0x00C)
+#define IOCG_MMC0_004_REG (IOCG_MMC0_REG_BASE + 0x010)
+#define IOCG_MMC0_005_REG (IOCG_MMC0_REG_BASE + 0x014)
+
+#define IOMG_AO_REG_BASE 0xFFF11000
+#define IOMG_AO_006_REG (IOMG_AO_REG_BASE + 0x018)
+
+#define IOMG_FUNC0 0
+#define IOMG_FUNC1 1
+#define IOCG_PULLUP BIT0
+#define IOCG_PULLDOWN BIT1
+#define IOCG_DRIVE(x) ((x) << 4)
+
+#define UFS_SYS_REG_BASE 0xFF3B1000
+
+#define UFS_SYS_PSW_POWER_CTRL_OFFSET 0x004
+#define UFS_SYS_PHY_ISO_EN_OFFSET 0x008
+#define UFS_SYS_HC_LP_CTRL_OFFSET 0x00C
+#define UFS_SYS_PHY_CLK_CTRL_OFFSET 0x010
+#define UFS_SYS_PSW_CLK_CTRL_OFFSET 0x014
+#define UFS_SYS_CLOCK_GATE_BYPASS_OFFSET 0x018
+#define UFS_SYS_RESET_CTRL_EN_OFFSET 0x01C
+#define UFS_SYS_MONITOR_HH_OFFSET 0x03C
+#define UFS_SYS_UFS_SYSCTRL_OFFSET 0x05C
+#define UFS_SYS_UFS_DEVICE_RESET_CTRL_OFFSET 0x060
+#define UFS_SYS_UFS_APB_ADDR_MASK_OFFSET 0x064
+
+#define BIT_UFS_PSW_ISO_CTRL (1 << 16)
+#define BIT_UFS_PSW_MTCMOS_EN (1 << 0)
+#define BIT_UFS_REFCLK_ISO_EN (1 << 16)
+#define BIT_UFS_PHY_ISO_CTRL (1 << 0)
+#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16)
+#define BIT_SYSCTRL_PWR_READY (1 << 8)
+#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24)
+#define MASK_SYSCTRL_REF_CLOCK_SEL (3 << 8)
+#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF)
+#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4)
+#define MASK_UFS_CLK_GATE_BYPASS (0x3F)
+#define BIT_SYSCTRL_LP_RESET_N (1 << 0)
+#define BIT_UFS_REFCLK_SRC_SE1 (1 << 0)
+#define MASK_UFS_SYSCTRL_BYPASS (0x3F << 16)
+#define MASK_UFS_DEVICE_RESET (1 << 16)
+#define BIT_UFS_DEVICE_RESET (1 << 0)
+
+#endif /* __HI3660_H__ */
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
new file mode 100644
index 000000000000..e88bad2167c6
--- /dev/null
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
@@ -0,0 +1,212 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Guid/EventGroup.h>
+
+#include <Hi3660.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PrintLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include "HiKey960Dxe.h"
+
+STATIC
+VOID
+InitSdCard (
+ IN VOID
+ )
+{
+ UINT32 Data;
+
+ //
+ // LDO16
+ // 000: 1.75V, 001: 1.8V, 010: 2.4V, 011: 2.6V, 100: 2.7V,
+ // 101: 2.85V, 110: 2.95V, 111: 3.0V.
+ //
+ Data = MmioRead32 (PMIC_LDO16_VSET_REG) & LDO16_VSET_MASK;
+ Data |= 6;
+ MmioWrite32 (PMIC_LDO16_VSET_REG, Data);
+ MmioOr32 (PMIC_LDO16_ONOFF_ECO_REG, LDO16_ONOFF_ECO_LDO16_ENABLE);
+ //
+ // wait regulator stable
+ //
+ MicroSecondDelay (100);
+
+ //
+ // LDO9
+ // 000: 1.75V, 001: 1.8V, 010: 1.825V, 011: 2.8V, 100: 2.85V,
+ // 101: 2.95V, 110: 3.0V, 111: 3.3V.
+ //
+ Data = MmioRead32 (PMIC_LDO9_VSET_REG) & LDO9_VSET_MASK;
+ Data |= 5;
+ MmioWrite32 (PMIC_LDO9_VSET_REG, Data);
+ MmioOr32 (PMU_REG_BASE + (0x6a << 2), 2);
+ //
+ // wait regulator stable
+ //
+ MicroSecondDelay (100);
+
+ //
+ // GPIO203
+ //
+ MmioWrite32 (IOMG_AO_REG_BASE + (24 << 2), 0); // GPIO function
+
+ //
+ // SD pinmux
+ //
+ MmioWrite32 (IOMG_MMC0_000_REG, IOMG_FUNC1); // SD_CLK
+ MmioWrite32 (IOMG_MMC0_001_REG, IOMG_FUNC1); // SD_CMD
+ MmioWrite32 (IOMG_MMC0_002_REG, IOMG_FUNC1); // SD_DATA0
+ MmioWrite32 (IOMG_MMC0_003_REG, IOMG_FUNC1); // SD_DATA1
+ MmioWrite32 (IOMG_MMC0_004_REG, IOMG_FUNC1); // SD_DATA2
+ MmioWrite32 (IOMG_MMC0_005_REG, IOMG_FUNC1); // SD_DATA3
+ MmioWrite32 (IOCG_MMC0_000_REG, IOCG_DRIVE (15)); // SD_CLK float with 32mA
+ MmioWrite32 (IOCG_MMC0_001_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_CMD
+ MmioWrite32 (IOCG_MMC0_002_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA0
+ MmioWrite32 (IOCG_MMC0_003_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA1
+ MmioWrite32 (IOCG_MMC0_004_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA2
+ MmioWrite32 (IOCG_MMC0_005_REG, IOCG_PULLUP | IOCG_DRIVE (8)); // SD_DATA3
+
+ //
+ // SC_SEL_SD:
+ // 0xx: 3.2MHz, 100: PPLL0, 101: PPLL1, 11x: PPLL2.
+ // SC_DIV_SD:
+ // divider = value + 1
+ //
+ do {
+ MmioOr32 (
+ CRG_CLKDIV4,
+ CLKDIV4_SC_SEL_SD (7) |
+ (CLKDIV4_SC_SEL_SD_MASK << CLKDIV4_SC_MASK_SHIFT)
+ );
+ Data = MmioRead32 (CRG_CLKDIV4) & CLKDIV4_SC_SEL_SD_MASK;
+ } while (Data != CLKDIV4_SC_SEL_SD (7));
+
+ //
+ // Unreset SD controller
+ //
+ MmioWrite32 (CRG_PERRSTDIS4, PERRSTEN4_SD);
+ do {
+ Data = MmioRead32 (CRG_PERRSTSTAT4);
+ } while ((Data & PERRSTEN4_SD) == PERRSTEN4_SD);
+ //
+ // Enable SD controller clock
+ //
+ MmioOr32 (CRG_PEREN0, PEREN0_GT_HCLK_SD);
+ MmioOr32 (CRG_PEREN4, PEREN4_GT_CLK_SD);
+ do {
+ Data = MmioRead32 (CRG_PERCLKEN4);
+ } while ((Data & PEREN4_GT_CLK_SD) != PEREN4_GT_CLK_SD);
+}
+
+VOID
+InitPeripherals (
+ IN VOID
+ )
+{
+ //
+ // Enable FPLL0
+ //
+ MmioOr32 (SCTRL_SCFPLLCTRL0, SCTRL_SCFPLLCTRL0_FPLL0_EN);
+
+ InitSdCard ();
+
+ //
+ // Enable wifi clock
+ //
+ MmioOr32 (PMIC_HARDWARE_CTRL0, PMIC_HARDWARE_CTRL0_WIFI_CLK);
+ MmioOr32 (PMIC_OSC32K_ONOFF_CTRL, PMIC_OSC32K_ONOFF_CTRL_EN_32K);
+}
+
+/**
+ Notification function of the event defined as belonging to the
+ EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in
+ the entry point of the driver.
+
+ This function is called when an event belonging to the
+ EFI_END_OF_DXE_EVENT_GROUP_GUID event group is signalled. Such an
+ event is signalled once at the end of the dispatching of all
+ drivers (end of the so called DXE phase).
+
+ @param[in] Event Event declared in the entry point of the driver whose
+ notification function is being invoked.
+ @param[in] Context NULL
+**/
+STATIC
+VOID
+OnEndOfDxe (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ UINT32 BootMode;
+ CHAR8 Buf[64];
+ UINTN Count;
+
+ BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK;
+ if (BootMode == BOOT_MODE_RECOVERY) {
+ Count = AsciiSPrint (
+ Buf,
+ 64,
+ "WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\n"
+ );
+ SerialPortWrite ((UINT8 *)Buf, Count);
+ Count = AsciiSPrint (
+ Buf,
+ 64,
+ "Switch to normal boot mode, then reboot to boot kernel.\n"
+ );
+ SerialPortWrite ((UINT8 *)Buf, Count);
+ }
+}
+
+EFI_STATUS
+EFIAPI
+HiKey960EntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_EVENT EndOfDxeEvent;
+
+ InitPeripherals ();
+
+ //
+ // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group.
+ // The "OnEndOfDxe()" function is declared as the call back function.
+ // It will be called at the end of the DXE phase when an event of the
+ // same group is signalled to inform about the end of the DXE phase.
+ // Install the INSTALL_FDT_PROTOCOL protocol.
+ //
+ Status = gBS->CreateEventEx (
+ EVT_NOTIFY_SIGNAL,
+ TPL_CALLBACK,
+ OnEndOfDxe,
+ NULL,
+ &gEfiEndOfDxeEventGroupGuid,
+ &EndOfDxeEvent
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return Status;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v7 edk-platforms 2/6] Platform/HiKey960: do basic initialization
2018-05-31 3:10 ` [PATCH v7 edk-platforms 2/6] Platform/HiKey960: do basic initialization Haojian Zhuang
@ 2018-05-31 21:01 ` Leif Lindholm
2018-05-31 21:03 ` Leif Lindholm
0 siblings, 1 reply; 10+ messages in thread
From: Leif Lindholm @ 2018-05-31 21:01 UTC (permalink / raw)
To: Haojian Zhuang; +Cc: edk2-devel, Ard Biesheuvel
This fixes the headers, but ignores the most important bit of feedback
on v6:
On Thu, May 31, 2018 at 11:10:06AM +0800, Haojian Zhuang wrote:
> Do some basic initliazation on peripherals, such as pins and
> regulators.
>
> The hardcoding code is taken from non-open reference code.
> Can't fix it for lack of documents.
>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
> ---
> diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
> new file mode 100644
> index 000000000000..e88bad2167c6
> --- /dev/null
> +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
...
> +/**
> + Notification function of the event defined as belonging to the
> + EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in
> + the entry point of the driver.
> +
> + This function is called when an event belonging to the
> + EFI_END_OF_DXE_EVENT_GROUP_GUID event group is signalled. Such an
> + event is signalled once at the end of the dispatching of all
> + drivers (end of the so called DXE phase).
> +
> + @param[in] Event Event declared in the entry point of the driver whose
> + notification function is being invoked.
> + @param[in] Context NULL
> +**/
> +STATIC
> +VOID
> +OnEndOfDxe (
> + IN EFI_EVENT Event,
> + IN VOID *Context
> + )
> +{
> + UINT32 BootMode;
> + CHAR8 Buf[64];
> + UINTN Count;
> +
> + BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK;
> + if (BootMode == BOOT_MODE_RECOVERY) {
> + Count = AsciiSPrint (
> + Buf,
> + 64,
> + "WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\n"
> + );
> + SerialPortWrite ((UINT8 *)Buf, Count);
> + Count = AsciiSPrint (
> + Buf,
> + 64,
> + "Switch to normal boot mode, then reboot to boot kernel.\n"
> + );
I gave the following feedback on v6, which has not been addressed at all:
---
I asked for the hand-coded values to be removed, and instead they have
been replaced by a static buffer which may or may not be able to hold
updated versions of the stringsm and require changes in three places
if that happens. This is not an improvement.
The length or size of a compile time constant should always be
described through StrLen/AsciiStrLen, or where possible sizeof.
In this instance, I would suggest doing something like:
VOID *RecoveryString;
VOID *SwitchString;
RecoveryString = "WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\n"
SwitchString = "Switch to normal boot mode, then reboot to boot
kernel.\n";
You can then use SerialPortWrite (RecoveryString,
AsciiStrLen(*RecoveryString)).
I think we should also in future look into how we can get the console
working before Dxe. Both HiKey boards are generally intended to be
used with displays, so these messages will be invisible to many users.
---
> + SerialPortWrite ((UINT8 *)Buf, Count);
> + }
> +}
/
Leif
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH v7 edk-platforms 2/6] Platform/HiKey960: do basic initialization
2018-05-31 21:01 ` Leif Lindholm
@ 2018-05-31 21:03 ` Leif Lindholm
0 siblings, 0 replies; 10+ messages in thread
From: Leif Lindholm @ 2018-05-31 21:03 UTC (permalink / raw)
To: Haojian Zhuang; +Cc: edk2-devel, Ard Biesheuvel
Oh, and please resubmit only this patch.
The rest are good to go, but I'll bring them in together.
/
Leif
On Thu, May 31, 2018 at 10:01:51PM +0100, Leif Lindholm wrote:
> This fixes the headers, but ignores the most important bit of feedback
> on v6:
>
> On Thu, May 31, 2018 at 11:10:06AM +0800, Haojian Zhuang wrote:
> > Do some basic initliazation on peripherals, such as pins and
> > regulators.
> >
> > The hardcoding code is taken from non-open reference code.
> > Can't fix it for lack of documents.
> >
> > Cc: Leif Lindholm <leif.lindholm@linaro.org>
> > Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
> > ---
>
> > diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
> > new file mode 100644
> > index 000000000000..e88bad2167c6
> > --- /dev/null
> > +++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
> ...
> > +/**
> > + Notification function of the event defined as belonging to the
> > + EFI_END_OF_DXE_EVENT_GROUP_GUID event group that was created in
> > + the entry point of the driver.
> > +
> > + This function is called when an event belonging to the
> > + EFI_END_OF_DXE_EVENT_GROUP_GUID event group is signalled. Such an
> > + event is signalled once at the end of the dispatching of all
> > + drivers (end of the so called DXE phase).
> > +
> > + @param[in] Event Event declared in the entry point of the driver whose
> > + notification function is being invoked.
> > + @param[in] Context NULL
> > +**/
> > +STATIC
> > +VOID
> > +OnEndOfDxe (
> > + IN EFI_EVENT Event,
> > + IN VOID *Context
> > + )
> > +{
> > + UINT32 BootMode;
> > + CHAR8 Buf[64];
> > + UINTN Count;
> > +
> > + BootMode = MmioRead32 (SCTRL_BAK_DATA0) & BOOT_MODE_MASK;
> > + if (BootMode == BOOT_MODE_RECOVERY) {
> > + Count = AsciiSPrint (
> > + Buf,
> > + 64,
> > + "WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\n"
> > + );
> > + SerialPortWrite ((UINT8 *)Buf, Count);
> > + Count = AsciiSPrint (
> > + Buf,
> > + 64,
> > + "Switch to normal boot mode, then reboot to boot kernel.\n"
> > + );
>
> I gave the following feedback on v6, which has not been addressed at all:
> ---
> I asked for the hand-coded values to be removed, and instead they have
> been replaced by a static buffer which may or may not be able to hold
> updated versions of the stringsm and require changes in three places
> if that happens. This is not an improvement.
>
> The length or size of a compile time constant should always be
> described through StrLen/AsciiStrLen, or where possible sizeof.
>
> In this instance, I would suggest doing something like:
>
> VOID *RecoveryString;
> VOID *SwitchString;
>
> RecoveryString = "WARNING: CAN NOT BOOT KERNEL IN RECOVERY MODE!\n"
> SwitchString = "Switch to normal boot mode, then reboot to boot
> kernel.\n";
>
> You can then use SerialPortWrite (RecoveryString,
> AsciiStrLen(*RecoveryString)).
>
> I think we should also in future look into how we can get the console
> working before Dxe. Both HiKey boards are generally intended to be
> used with displays, so these messages will be invisible to many users.
> ---
>
> > + SerialPortWrite ((UINT8 *)Buf, Count);
> > + }
> > +}
>
> /
> Leif
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v7 edk-platforms 3/6] Platform/HiKey960: enable virtual keyboard
2018-05-31 3:10 [PATCH v7 edk-platforms 0/6] enable virtual keyboards Haojian Zhuang
2018-05-31 3:10 ` [PATCH v7 edk-platforms 1/6] Platform/Hisilicon/HiKey960: add gpio platform driver Haojian Zhuang
2018-05-31 3:10 ` [PATCH v7 edk-platforms 2/6] Platform/HiKey960: do basic initialization Haojian Zhuang
@ 2018-05-31 3:10 ` Haojian Zhuang
2018-05-31 3:10 ` [PATCH v7 edk-platforms 4/6] Platform/Hisilicon/HiKey: add gpio platform driver Haojian Zhuang
` (2 subsequent siblings)
5 siblings, 0 replies; 10+ messages in thread
From: Haojian Zhuang @ 2018-05-31 3:10 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Enable virtual keyboard on HiKey960 platform. It checks two
conditions, such as pattern in memory and GPIO pin setting.
Since code is ported from non-open
The hardcoding code is taken from non-open reference code.
Can't fix it for lack of documents.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
Platform/Hisilicon/HiKey960/HiKey960.dsc | 5 +
Platform/Hisilicon/HiKey960/HiKey960.fdf | 5 +
Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf | 1 +
Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h | 24 +++++
Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c | 97 ++++++++++++++++++++
5 files changed, 132 insertions(+)
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.dsc b/Platform/Hisilicon/HiKey960/HiKey960.dsc
index 6cc1c1edf453..79e68754976d 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.dsc
+++ b/Platform/Hisilicon/HiKey960/HiKey960.dsc
@@ -182,6 +182,11 @@ [Components.common]
Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ #
+ # Virtual Keyboard
+ #
+ EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960.fdf b/Platform/Hisilicon/HiKey960/HiKey960.fdf
index b7d70b010598..d65f77878575 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960.fdf
+++ b/Platform/Hisilicon/HiKey960/HiKey960.fdf
@@ -123,6 +123,11 @@ [FV.FvMain]
INF Platform/Hisilicon/HiKey960/HiKey960GpioDxe/HiKey960GpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ #
+ # Virtual Keyboard
+ #
+ INF EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
INF Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
#
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
index a1a7d005ce8b..46a9a5803e3d 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.inf
@@ -39,6 +39,7 @@ [LibraryClasses]
[Protocols]
gEmbeddedGpioProtocolGuid
+ gPlatformVirtualKeyboardProtocolGuid
[Guids]
gEfiEndOfDxeEventGroupGuid
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
index ae8bdd5c8140..211eea55aa54 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.h
@@ -15,6 +15,30 @@
#ifndef __HIKEY960DXE_H__
#define __HIKEY960DXE_H__
+#include <Guid/EventGroup.h>
+
+#include <Hi3660.h>
+
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/PrintLib.h>
+#include <Library/SerialPortLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+#include <Protocol/PlatformVirtualKeyboard.h>
+
+#define ADB_REBOOT_ADDRESS 0x32100000
+#define ADB_REBOOT_BOOTLOADER 0x77665500
+#define ADB_REBOOT_NONE 0x77665501
+
+#define DETECT_SW_FASTBOOT 68 // GPIO8_4
+
enum {
BOOT_MODE_RECOVERY = 0,
BOOT_MODE_MASK = 1,
diff --git a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
index e88bad2167c6..13d6dda680c6 100644
--- a/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
+++ b/Platform/Hisilicon/HiKey960/HiKey960Dxe/HiKey960Dxe.c
@@ -28,6 +28,8 @@
#include "HiKey960Dxe.h"
+STATIC EMBEDDED_GPIO *mGpio;
+
STATIC
VOID
InitSdCard (
@@ -180,6 +182,94 @@ OnEndOfDxe (
EFI_STATUS
EFIAPI
+VirtualKeyboardRegister (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (
+ &gEmbeddedGpioProtocolGuid,
+ NULL,
+ (VOID **) &mGpio
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardReset (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ if (mGpio == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ //
+ // Configure GPIO68 as GPIO function
+ //
+ MmioWrite32 (0xe896c108, 0);
+ Status = mGpio->Set (mGpio, DETECT_SW_FASTBOOT, GPIO_MODE_INPUT);
+ return Status;
+}
+
+BOOLEAN
+EFIAPI
+VirtualKeyboardQuery (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ EFI_STATUS Status;
+ UINTN Value = 0;
+
+ if ((VirtualKey == NULL) || (mGpio == NULL)) {
+ return FALSE;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ goto Done;
+ } else {
+ Status = mGpio->Get (mGpio, DETECT_SW_FASTBOOT, &Value);
+ if (EFI_ERROR (Status) || (Value != 0)) {
+ return FALSE;
+ }
+ }
+Done:
+ VirtualKey->Signature = VIRTUAL_KEYBOARD_KEY_SIGNATURE;
+ VirtualKey->Key.ScanCode = SCAN_NULL;
+ VirtualKey->Key.UnicodeChar = L'f';
+ return TRUE;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardClear (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ if (VirtualKey == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ MmioWrite32 (ADB_REBOOT_ADDRESS, ADB_REBOOT_NONE);
+ WriteBackInvalidateDataCacheRange ((VOID *)ADB_REBOOT_ADDRESS, 4);
+ }
+ return EFI_SUCCESS;
+}
+
+PLATFORM_VIRTUAL_KBD_PROTOCOL mVirtualKeyboard = {
+ VirtualKeyboardRegister,
+ VirtualKeyboardReset,
+ VirtualKeyboardQuery,
+ VirtualKeyboardClear
+};
+
+EFI_STATUS
+EFIAPI
HiKey960EntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
@@ -208,5 +298,12 @@ HiKey960EntryPoint (
if (EFI_ERROR (Status)) {
return Status;
}
+
+ Status = gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gPlatformVirtualKeyboardProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &mVirtualKeyboard
+ );
return Status;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v7 edk-platforms 4/6] Platform/Hisilicon/HiKey: add gpio platform driver
2018-05-31 3:10 [PATCH v7 edk-platforms 0/6] enable virtual keyboards Haojian Zhuang
` (2 preceding siblings ...)
2018-05-31 3:10 ` [PATCH v7 edk-platforms 3/6] Platform/HiKey960: enable virtual keyboard Haojian Zhuang
@ 2018-05-31 3:10 ` Haojian Zhuang
2018-05-31 3:10 ` [PATCH v7 edk-platforms 5/6] Platform/HiKey: do basic initialization on hikey Haojian Zhuang
2018-05-31 3:10 ` [PATCH v7 edk-platforms 6/6] Platform/HiKey: enable virtual keyboard Haojian Zhuang
5 siblings, 0 replies; 10+ messages in thread
From: Haojian Zhuang @ 2018-05-31 3:10 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Add gpio platform driver to enable GPIO in HiKey platform.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf | 36 ++++++++++
Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c | 74 ++++++++++++++++++++
2 files changed, 110 insertions(+)
diff --git a/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
new file mode 100644
index 000000000000..2791b9f44cad
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
@@ -0,0 +1,36 @@
+#
+# Copyright (c) 2018, Linaro. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001a
+ BASE_NAME = HiKeyGpio
+ FILE_GUID = b51a851c-7bf7-463f-b261-cfb158b7f699
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKeyGpioEntryPoint
+
+[Sources.common]
+ HiKeyGpioDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ UefiDriverEntryPoint
+
+[Protocols]
+ gPlatformGpioProtocolGuid
+
+[Depex]
+ TRUE
diff --git a/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c
new file mode 100644
index 000000000000..be535f8f1903
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.c
@@ -0,0 +1,74 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/EmbeddedGpio.h>
+
+GPIO_CONTROLLER gGpioDevice[] = {
+ //
+ // { base address, gpio index, gpio count }
+ //
+ { 0xf8011000, 0, 8 }, // GPIO0
+ { 0xf8012000, 8, 8 }, // GPIO1
+ { 0xf8013000, 16, 8 }, // GPIO2
+ { 0xf8014000, 24, 8 }, // GPIO3
+ { 0xf7020000, 32, 8 }, // GPIO4
+ { 0xf7021000, 40, 8 }, // GPIO5
+ { 0xf7022000, 48, 8 }, // GPIO6
+ { 0xf7023000, 56, 8 }, // GPIO7
+ { 0xf7024000, 64, 8 }, // GPIO8
+ { 0xf7025000, 72, 8 }, // GPIO9
+ { 0xf7026000, 80, 8 }, // GPIO10
+ { 0xf7027000, 88, 8 }, // GPIO11
+ { 0xf7028000, 96, 8 }, // GPIO12
+ { 0xf7029000, 104, 8 }, // GPIO13
+ { 0xf702a000, 112, 8 }, // GPIO14
+ { 0xf702b000, 120, 8 }, // GPIO15
+ { 0xf702c000, 128, 8 }, // GPIO16
+ { 0xf702d000, 136, 8 }, // GPIO17
+ { 0xf702e000, 144, 8 }, // GPIO18
+ { 0xf702f000, 152, 8 } // GPIO19
+};
+
+PLATFORM_GPIO_CONTROLLER gPlatformGpioDevice = {
+ //
+ // { global gpio count, gpio controller counter, GPIO_CONTROLLER }
+ //
+ 160, 20, gGpioDevice
+};
+
+EFI_STATUS
+EFIAPI
+HiKeyGpioEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ // Install the Embedded Platform GPIO Protocol onto a new handle
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &Handle,
+ &gPlatformGpioProtocolGuid, &gPlatformGpioDevice,
+ NULL
+ );
+ if (EFI_ERROR(Status)) {
+ Status = EFI_OUT_OF_RESOURCES;
+ }
+
+ return Status;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH v7 edk-platforms 5/6] Platform/HiKey: do basic initialization on hikey
2018-05-31 3:10 [PATCH v7 edk-platforms 0/6] enable virtual keyboards Haojian Zhuang
` (3 preceding siblings ...)
2018-05-31 3:10 ` [PATCH v7 edk-platforms 4/6] Platform/Hisilicon/HiKey: add gpio platform driver Haojian Zhuang
@ 2018-05-31 3:10 ` Haojian Zhuang
2018-05-31 20:57 ` Leif Lindholm
2018-05-31 3:10 ` [PATCH v7 edk-platforms 6/6] Platform/HiKey: enable virtual keyboard Haojian Zhuang
5 siblings, 1 reply; 10+ messages in thread
From: Haojian Zhuang @ 2018-05-31 3:10 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Do some basic initialization on HiKey platform, such as pin
setting, regulators and making peripherals out of reset mode.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
Platform/Hisilicon/HiKey/HiKey.dsc | 3 +
Platform/Hisilicon/HiKey/HiKey.fdf | 3 +
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf | 40 +++++++
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h | 24 +++++
Silicon/Hisilicon/Hi6220/Include/Hi6220.h | 6 ++
Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h | 50 +++++++++
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c | 109 ++++++++++++++++++++
7 files changed, 235 insertions(+)
diff --git a/Platform/Hisilicon/HiKey/HiKey.dsc b/Platform/Hisilicon/HiKey/HiKey.dsc
index 5c1604d7f689..5cc4ff27f01b 100644
--- a/Platform/Hisilicon/HiKey/HiKey.dsc
+++ b/Platform/Hisilicon/HiKey/HiKey.dsc
@@ -189,8 +189,11 @@ [Components.common]
#
# GPIO
#
+ Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
+
#
# MMC/SD
#
diff --git a/Platform/Hisilicon/HiKey/HiKey.fdf b/Platform/Hisilicon/HiKey/HiKey.fdf
index 2a5c5a4d6e79..39020d27dbcd 100644
--- a/Platform/Hisilicon/HiKey/HiKey.fdf
+++ b/Platform/Hisilicon/HiKey/HiKey.fdf
@@ -120,8 +120,11 @@ [FV.FvMain]
#
# GPIO
#
+ INF Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ INF Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
+
#
# Multimedia Card Interface
#
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
new file mode 100644
index 000000000000..34734391b45a
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
@@ -0,0 +1,40 @@
+#
+# Copyright (c) 2013 - 2014, ARM Ltd. All rights reserved.
+# Copyright (c) 2018, Linaro Ltd. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001a
+ BASE_NAME = HiKeyDxe
+ FILE_GUID = f567684b-1089-4214-8881-d64b20cbda2f
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = HiKeyEntryPoint
+
+[Sources.common]
+ HiKeyDxe.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+
+[LibraryClasses]
+ DebugLib
+ IoLib
+ UefiLib
+ UefiDriverEntryPoint
+
+[Guids]
+ gEfiEndOfDxeEventGroupGuid
+
+[Depex]
+ TRUE
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h
new file mode 100644
index 000000000000..104048135f27
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h
@@ -0,0 +1,24 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HIKEYDXE_H__
+#define __HIKEYDXE_H__
+
+#define DETECT_J15_FASTBOOT 24 // GPIO3_0
+
+#define ADB_REBOOT_ADDRESS 0x05F01000
+#define ADB_REBOOT_BOOTLOADER 0x77665500
+#define ADB_REBOOT_NONE 0x77665501
+
+#endif /* __HIKEYDXE_H__ */
diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h
index 203424adfc8b..9b2508955772 100644
--- a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h
+++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h
@@ -23,6 +23,12 @@
#define HI6220_PERIPH_BASE 0xF4000000
#define HI6220_PERIPH_SZ 0x05800000
+#define IOMG_BASE 0xF7010000
+#define IOMG_080_REG (IOMG_BASE + 0x140)
+
+#define IOCG_BASE 0xF7010800
+#define IOCG_084_REG (IOCG_BASE + 0x150)
+
#define PERI_CTRL_BASE 0xF7030000
#define SC_PERIPH_CTRL4 0x00C
#define CTRL4_FPGA_EXT_PHY_SEL BIT3
diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
new file mode 100644
index 000000000000..0db8af37d2d0
--- /dev/null
+++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
@@ -0,0 +1,50 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#ifndef __HI6220_REGS_PERI_H__
+#define __HI6220_REGS_PERI_H__
+
+#define SC_PERIPH_CLKEN3 0x230
+#define SC_PERIPH_RSTEN3 0x330
+#define SC_PERIPH_RSTDIS0 0x304
+#define SC_PERIPH_RSTDIS3 0x334
+#define SC_PERIPH_RSTSTAT3 0x338
+
+/* SC_PERIPH_RSTEN0/RSTDIS0/RSTSTAT0 */
+#define PERIPH_RST0_MMC2 (1 << 2)
+
+/* SC_PERIPH_RSTEN3/RSTDIS3/RSTSTAT3 */
+#define PERIPH_RST3_CSSYS (1 << 0)
+#define PERIPH_RST3_I2C0 (1 << 1)
+#define PERIPH_RST3_I2C1 (1 << 2)
+#define PERIPH_RST3_I2C2 (1 << 3)
+#define PERIPH_RST3_I2C3 (1 << 4)
+#define PERIPH_RST3_UART1 (1 << 5)
+#define PERIPH_RST3_UART2 (1 << 6)
+#define PERIPH_RST3_UART3 (1 << 7)
+#define PERIPH_RST3_UART4 (1 << 8)
+#define PERIPH_RST3_SSP (1 << 9)
+#define PERIPH_RST3_PWM (1 << 10)
+#define PERIPH_RST3_BLPWM (1 << 11)
+#define PERIPH_RST3_TSENSOR (1 << 12)
+#define PERIPH_RST3_DAPB (1 << 18)
+#define PERIPH_RST3_HKADC (1 << 19)
+#define PERIPH_RST3_CODEC_SSI (1 << 20)
+#define PERIPH_RST3_PMUSSI1 (1 << 22)
+
+#define PMUSSI_REG(x) (PMUSSI_BASE + ((x) << 2))
+#define PMUSSI_ONOFF8_REG (PMUSSI_BASE + (0x1c << 2))
+#define PMUSSI_ONOFF8_EN_32KB BIT6
+
+#endif /* __HI6220_REGS_PERI_H__ */
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
new file mode 100644
index 000000000000..8c752e06499c
--- /dev/null
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
@@ -0,0 +1,109 @@
+/** @file
+*
+* Copyright (c) 2018, Linaro Ltd. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/UefiLib.h>
+
+#include <Hi6220.h>
+#include <Hi6220RegsPeri.h>
+
+#include "HiKeyDxe.h"
+
+STATIC
+VOID
+UartInit (
+ IN VOID
+ )
+{
+ UINT32 Val;
+
+ /* make UART1 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART1);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART1);
+ /* make UART2 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART2);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART2);
+ /* make UART3 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART3);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART3);
+ /* make UART4 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART4);
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART4);
+
+ /* make DW_MMC2 out of reset */
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS0, PERIPH_RST0_MMC2);
+
+ /* enable clock for BT/WIFI */
+ Val = MmioRead32 (PMUSSI_ONOFF8_REG) | PMUSSI_ONOFF8_EN_32KB;
+ MmioWrite32 (PMUSSI_ONOFF8_REG, Val);
+}
+
+STATIC
+VOID
+MtcmosInit (
+ IN VOID
+ )
+{
+ UINT32 Data;
+
+ /* enable MTCMOS for GPU */
+ MmioWrite32 (AO_CTRL_BASE + SC_PW_MTCMOS_EN0, PW_EN0_G3D);
+ do {
+ Data = MmioRead32 (AO_CTRL_BASE + SC_PW_MTCMOS_ACK_STAT0);
+ } while ((Data & PW_EN0_G3D) == 0);
+}
+
+EFI_STATUS
+HiKeyInitPeripherals (
+ IN VOID
+ )
+{
+ UINT32 Data, Bits;
+
+ /* make I2C0/I2C1/I2C2/SPI0 out of reset */
+ Bits = PERIPH_RST3_I2C0 | PERIPH_RST3_I2C1 | PERIPH_RST3_I2C2 | \
+ PERIPH_RST3_SSP;
+ MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, Bits);
+
+ do {
+ Data = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_RSTSTAT3);
+ } while (Data & Bits);
+
+ UartInit ();
+ /* MTCMOS -- Multi-threshold CMOS */
+ MtcmosInit ();
+
+ /* Set DETECT_J15_FASTBOOT (GPIO24) pin as GPIO function */
+ MmioWrite32 (IOCG_084_REG, 0); /* configure GPIO24 as nopull */
+ MmioWrite32 (IOMG_080_REG, 0); /* configure GPIO24 as GPIO */
+
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+HiKeyEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+
+ Status = HiKeyInitPeripherals ();
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return Status;
+}
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH v7 edk-platforms 5/6] Platform/HiKey: do basic initialization on hikey
2018-05-31 3:10 ` [PATCH v7 edk-platforms 5/6] Platform/HiKey: do basic initialization on hikey Haojian Zhuang
@ 2018-05-31 20:57 ` Leif Lindholm
0 siblings, 0 replies; 10+ messages in thread
From: Leif Lindholm @ 2018-05-31 20:57 UTC (permalink / raw)
To: Haojian Zhuang; +Cc: edk2-devel, Ard Biesheuvel
On Thu, May 31, 2018 at 11:10:09AM +0800, Haojian Zhuang wrote:
> Do some basic initialization on HiKey platform, such as pin
> setting, regulators and making peripherals out of reset mode.
>
> Cc: Leif Lindholm <leif.lindholm@linaro.org>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
> ---
> Platform/Hisilicon/HiKey/HiKey.dsc | 3 +
> Platform/Hisilicon/HiKey/HiKey.fdf | 3 +
> Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf | 40 +++++++
> Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h | 24 +++++
> Silicon/Hisilicon/Hi6220/Include/Hi6220.h | 6 ++
> Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h | 50 +++++++++
> Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c | 109 ++++++++++++++++++++
> 7 files changed, 235 insertions(+)
>
> diff --git a/Platform/Hisilicon/HiKey/HiKey.dsc b/Platform/Hisilicon/HiKey/HiKey.dsc
> index 5c1604d7f689..5cc4ff27f01b 100644
> --- a/Platform/Hisilicon/HiKey/HiKey.dsc
> +++ b/Platform/Hisilicon/HiKey/HiKey.dsc
> @@ -189,8 +189,11 @@ [Components.common]
> #
> # GPIO
> #
> + Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
> ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
>
> + Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
> +
> #
> # MMC/SD
> #
> diff --git a/Platform/Hisilicon/HiKey/HiKey.fdf b/Platform/Hisilicon/HiKey/HiKey.fdf
> index 2a5c5a4d6e79..39020d27dbcd 100644
> --- a/Platform/Hisilicon/HiKey/HiKey.fdf
> +++ b/Platform/Hisilicon/HiKey/HiKey.fdf
> @@ -120,8 +120,11 @@ [FV.FvMain]
> #
> # GPIO
> #
> + INF Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
> INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
>
> + INF Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
> +
> #
> # Multimedia Card Interface
> #
> diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
> new file mode 100644
> index 000000000000..34734391b45a
> --- /dev/null
> +++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
> @@ -0,0 +1,40 @@
> +#
> +# Copyright (c) 2013 - 2014, ARM Ltd. All rights reserved.
> +# Copyright (c) 2018, Linaro Ltd. All rights reserved.
> +#
> +# This program and the accompanying materials
> +# are licensed and made available under the terms and conditions of the BSD License
> +# which accompanies this distribution. The full text of the license may be found at
> +# http://opensource.org/licenses/bsd-license.php
> +#
> +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +#
> +
> +[Defines]
> + INF_VERSION = 0x0001001a
> + BASE_NAME = HiKeyDxe
> + FILE_GUID = f567684b-1089-4214-8881-d64b20cbda2f
> + MODULE_TYPE = DXE_DRIVER
> + VERSION_STRING = 1.0
> + ENTRY_POINT = HiKeyEntryPoint
> +
> +[Sources.common]
> + HiKeyDxe.c
> +
> +[Packages]
> + EmbeddedPkg/EmbeddedPkg.dec
> + MdeModulePkg/MdeModulePkg.dec
> + MdePkg/MdePkg.dec
> +
> +[LibraryClasses]
> + DebugLib
> + IoLib
> + UefiLib
> + UefiDriverEntryPoint
> +
> +[Guids]
> + gEfiEndOfDxeEventGroupGuid
> +
> +[Depex]
> + TRUE
> diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h
> new file mode 100644
> index 000000000000..104048135f27
> --- /dev/null
> +++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.h
> @@ -0,0 +1,24 @@
> +/** @file
> +*
> +* Copyright (c) 2018, Linaro Ltd. All rights reserved.
> +*
> +* This program and the accompanying materials
> +* are licensed and made available under the terms and conditions of the BSD License
> +* which accompanies this distribution. The full text of the license may be found at
> +* http://opensource.org/licenses/bsd-license.php
> +*
> +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +*
> +**/
> +
> +#ifndef __HIKEYDXE_H__
> +#define __HIKEYDXE_H__
> +
> +#define DETECT_J15_FASTBOOT 24 // GPIO3_0
> +
> +#define ADB_REBOOT_ADDRESS 0x05F01000
> +#define ADB_REBOOT_BOOTLOADER 0x77665500
> +#define ADB_REBOOT_NONE 0x77665501
> +
> +#endif /* __HIKEYDXE_H__ */
> diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h
> index 203424adfc8b..9b2508955772 100644
> --- a/Silicon/Hisilicon/Hi6220/Include/Hi6220.h
> +++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220.h
> @@ -23,6 +23,12 @@
> #define HI6220_PERIPH_BASE 0xF4000000
> #define HI6220_PERIPH_SZ 0x05800000
>
> +#define IOMG_BASE 0xF7010000
> +#define IOMG_080_REG (IOMG_BASE + 0x140)
> +
> +#define IOCG_BASE 0xF7010800
> +#define IOCG_084_REG (IOCG_BASE + 0x150)
> +
> #define PERI_CTRL_BASE 0xF7030000
> #define SC_PERIPH_CTRL4 0x00C
> #define CTRL4_FPGA_EXT_PHY_SEL BIT3
> diff --git a/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
> new file mode 100644
> index 000000000000..0db8af37d2d0
> --- /dev/null
> +++ b/Silicon/Hisilicon/Hi6220/Include/Hi6220RegsPeri.h
> @@ -0,0 +1,50 @@
> +/** @file
> +*
> +* Copyright (c) 2018, Linaro Ltd. All rights reserved.
> +*
> +* This program and the accompanying materials
> +* are licensed and made available under the terms and conditions of the BSD License
> +* which accompanies this distribution. The full text of the license may be found at
> +* http://opensource.org/licenses/bsd-license.php
> +*
> +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +*
> +**/
> +
> +#ifndef __HI6220_REGS_PERI_H__
> +#define __HI6220_REGS_PERI_H__
> +
> +#define SC_PERIPH_CLKEN3 0x230
> +#define SC_PERIPH_RSTEN3 0x330
> +#define SC_PERIPH_RSTDIS0 0x304
> +#define SC_PERIPH_RSTDIS3 0x334
> +#define SC_PERIPH_RSTSTAT3 0x338
> +
> +/* SC_PERIPH_RSTEN0/RSTDIS0/RSTSTAT0 */
> +#define PERIPH_RST0_MMC2 (1 << 2)
> +
> +/* SC_PERIPH_RSTEN3/RSTDIS3/RSTSTAT3 */
> +#define PERIPH_RST3_CSSYS (1 << 0)
> +#define PERIPH_RST3_I2C0 (1 << 1)
> +#define PERIPH_RST3_I2C1 (1 << 2)
> +#define PERIPH_RST3_I2C2 (1 << 3)
> +#define PERIPH_RST3_I2C3 (1 << 4)
> +#define PERIPH_RST3_UART1 (1 << 5)
> +#define PERIPH_RST3_UART2 (1 << 6)
> +#define PERIPH_RST3_UART3 (1 << 7)
> +#define PERIPH_RST3_UART4 (1 << 8)
> +#define PERIPH_RST3_SSP (1 << 9)
> +#define PERIPH_RST3_PWM (1 << 10)
> +#define PERIPH_RST3_BLPWM (1 << 11)
> +#define PERIPH_RST3_TSENSOR (1 << 12)
> +#define PERIPH_RST3_DAPB (1 << 18)
> +#define PERIPH_RST3_HKADC (1 << 19)
> +#define PERIPH_RST3_CODEC_SSI (1 << 20)
> +#define PERIPH_RST3_PMUSSI1 (1 << 22)
> +
> +#define PMUSSI_REG(x) (PMUSSI_BASE + ((x) << 2))
> +#define PMUSSI_ONOFF8_REG (PMUSSI_BASE + (0x1c << 2))
> +#define PMUSSI_ONOFF8_EN_32KB BIT6
> +
> +#endif /* __HI6220_REGS_PERI_H__ */
> diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
> new file mode 100644
> index 000000000000..8c752e06499c
> --- /dev/null
> +++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
> @@ -0,0 +1,109 @@
> +/** @file
> +*
> +* Copyright (c) 2018, Linaro Ltd. All rights reserved.
> +*
> +* This program and the accompanying materials
> +* are licensed and made available under the terms and conditions of the BSD License
> +* which accompanies this distribution. The full text of the license may be found at
> +* http://opensource.org/licenses/bsd-license.php
> +*
> +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
> +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
> +*
> +**/
> +
> +#include <Library/DebugLib.h>
> +#include <Library/IoLib.h>
> +#include <Library/UefiLib.h>
> +
> +#include <Hi6220.h>
> +#include <Hi6220RegsPeri.h>
> +
> +#include "HiKeyDxe.h"
> +
> +STATIC
> +VOID
> +UartInit (
> + IN VOID
> + )
> +{
> + UINT32 Val;
> +
> + /* make UART1 out of reset */
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART1);
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART1);
> + /* make UART2 out of reset */
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART2);
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART2);
> + /* make UART3 out of reset */
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART3);
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART3);
> + /* make UART4 out of reset */
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, PERIPH_RST3_UART4);
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_CLKEN3, PERIPH_RST3_UART4);
> +
> + /* make DW_MMC2 out of reset */
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS0, PERIPH_RST0_MMC2);
> +
> + /* enable clock for BT/WIFI */
> + Val = MmioRead32 (PMUSSI_ONOFF8_REG) | PMUSSI_ONOFF8_EN_32KB;
> + MmioWrite32 (PMUSSI_ONOFF8_REG, Val);
> +}
> +
> +STATIC
> +VOID
> +MtcmosInit (
> + IN VOID
> + )
> +{
> + UINT32 Data;
> +
> + /* enable MTCMOS for GPU */
> + MmioWrite32 (AO_CTRL_BASE + SC_PW_MTCMOS_EN0, PW_EN0_G3D);
> + do {
> + Data = MmioRead32 (AO_CTRL_BASE + SC_PW_MTCMOS_ACK_STAT0);
> + } while ((Data & PW_EN0_G3D) == 0);
> +}
> +
> +EFI_STATUS
> +HiKeyInitPeripherals (
> + IN VOID
> + )
> +{
> + UINT32 Data, Bits;
> +
> + /* make I2C0/I2C1/I2C2/SPI0 out of reset */
> + Bits = PERIPH_RST3_I2C0 | PERIPH_RST3_I2C1 | PERIPH_RST3_I2C2 | \
> + PERIPH_RST3_SSP;
> + MmioWrite32 (PERI_CTRL_BASE + SC_PERIPH_RSTDIS3, Bits);
> +
> + do {
> + Data = MmioRead32 (PERI_CTRL_BASE + SC_PERIPH_RSTSTAT3);
> + } while (Data & Bits);
> +
> + UartInit ();
> + /* MTCMOS -- Multi-threshold CMOS */
> + MtcmosInit ();
> +
> + /* Set DETECT_J15_FASTBOOT (GPIO24) pin as GPIO function */
> + MmioWrite32 (IOCG_084_REG, 0); /* configure GPIO24 as nopull */
> + MmioWrite32 (IOMG_080_REG, 0); /* configure GPIO24 as GPIO */
> +
> + return EFI_SUCCESS;
> +}
> +
> +EFI_STATUS
> +EFIAPI
> +HiKeyEntryPoint (
> + IN EFI_HANDLE ImageHandle,
> + IN EFI_SYSTEM_TABLE *SystemTable
> + )
> +{
> + EFI_STATUS Status;
> +
> + Status = HiKeyInitPeripherals ();
> + if (EFI_ERROR (Status)) {
> + return Status;
> + }
> + return Status;
> +}
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v7 edk-platforms 6/6] Platform/HiKey: enable virtual keyboard
2018-05-31 3:10 [PATCH v7 edk-platforms 0/6] enable virtual keyboards Haojian Zhuang
` (4 preceding siblings ...)
2018-05-31 3:10 ` [PATCH v7 edk-platforms 5/6] Platform/HiKey: do basic initialization on hikey Haojian Zhuang
@ 2018-05-31 3:10 ` Haojian Zhuang
5 siblings, 0 replies; 10+ messages in thread
From: Haojian Zhuang @ 2018-05-31 3:10 UTC (permalink / raw)
To: edk2-devel; +Cc: Haojian Zhuang, Leif Lindholm, Ard Biesheuvel
Enable virtual keyboard on HiKey platform. It detects the pattern
in memory and GPIO pin setting, and simulates them into virtual
key.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
Platform/Hisilicon/HiKey/HiKey.dsc | 5 +
Platform/Hisilicon/HiKey/HiKey.fdf | 5 +
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf | 5 +
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c | 98 ++++++++++++++++++++
4 files changed, 113 insertions(+)
diff --git a/Platform/Hisilicon/HiKey/HiKey.dsc b/Platform/Hisilicon/HiKey/HiKey.dsc
index 5cc4ff27f01b..83dd68a820b1 100644
--- a/Platform/Hisilicon/HiKey/HiKey.dsc
+++ b/Platform/Hisilicon/HiKey/HiKey.dsc
@@ -192,6 +192,11 @@ [Components.common]
Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ #
+ # Virtual Keyboard
+ #
+ EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey/HiKey.fdf b/Platform/Hisilicon/HiKey/HiKey.fdf
index 39020d27dbcd..2bca7232b6e5 100644
--- a/Platform/Hisilicon/HiKey/HiKey.fdf
+++ b/Platform/Hisilicon/HiKey/HiKey.fdf
@@ -123,6 +123,11 @@ [FV.FvMain]
INF Platform/Hisilicon/HiKey/HiKeyGpioDxe/HiKeyGpioDxe.inf
INF ArmPlatformPkg/Drivers/PL061GpioDxe/PL061GpioDxe.inf
+ #
+ # Virtual Keyboard
+ #
+ INF EmbeddedPkg/Drivers/VirtualKeyboardDxe/VirtualKeyboardDxe.inf
+
INF Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
#
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
index 34734391b45a..41aa7f8081ed 100644
--- a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.inf
@@ -28,11 +28,16 @@ [Packages]
MdePkg/MdePkg.dec
[LibraryClasses]
+ CacheMaintenanceLib
DebugLib
IoLib
UefiLib
UefiDriverEntryPoint
+[Protocols]
+ gEmbeddedGpioProtocolGuid
+ gPlatformVirtualKeyboardProtocolGuid
+
[Guids]
gEfiEndOfDxeEventGroupGuid
diff --git a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
index 8c752e06499c..832615f9cc80 100644
--- a/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
+++ b/Platform/Hisilicon/HiKey/HiKeyDxe/HiKeyDxe.c
@@ -12,10 +12,15 @@
*
**/
+#include <Library/CacheMaintenanceLib.h>
#include <Library/DebugLib.h>
#include <Library/IoLib.h>
+#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiLib.h>
+#include <Protocol/EmbeddedGpio.h>
+#include <Protocol/PlatformVirtualKeyboard.h>
+
#include <Hi6220.h>
#include <Hi6220RegsPeri.h>
@@ -50,6 +55,8 @@ UartInit (
MmioWrite32 (PMUSSI_ONOFF8_REG, Val);
}
+STATIC EMBEDDED_GPIO *mGpio;
+
STATIC
VOID
MtcmosInit (
@@ -94,6 +101,90 @@ HiKeyInitPeripherals (
EFI_STATUS
EFIAPI
+VirtualKeyboardRegister (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ Status = gBS->LocateProtocol (
+ &gEmbeddedGpioProtocolGuid,
+ NULL,
+ (VOID **) &mGpio
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ return EFI_SUCCESS;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardReset (
+ IN VOID
+ )
+{
+ EFI_STATUS Status;
+
+ if (mGpio == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ Status = mGpio->Set (mGpio, DETECT_J15_FASTBOOT, GPIO_MODE_INPUT);
+ return Status;
+}
+
+BOOLEAN
+EFIAPI
+VirtualKeyboardQuery (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ EFI_STATUS Status;
+ UINTN Value = 0;
+
+ if ((VirtualKey == NULL) || (mGpio == NULL)) {
+ return FALSE;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ goto Done;
+ } else {
+ Status = mGpio->Get (mGpio, DETECT_J15_FASTBOOT, &Value);
+ if (EFI_ERROR (Status) || (Value != 0)) {
+ return FALSE;
+ }
+ }
+Done:
+ VirtualKey->Signature = VIRTUAL_KEYBOARD_KEY_SIGNATURE;
+ VirtualKey->Key.ScanCode = SCAN_NULL;
+ VirtualKey->Key.UnicodeChar = L'f';
+ return TRUE;
+}
+
+EFI_STATUS
+EFIAPI
+VirtualKeyboardClear (
+ IN VIRTUAL_KBD_KEY *VirtualKey
+ )
+{
+ if (VirtualKey == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (MmioRead32 (ADB_REBOOT_ADDRESS) == ADB_REBOOT_BOOTLOADER) {
+ MmioWrite32 (ADB_REBOOT_ADDRESS, ADB_REBOOT_NONE);
+ WriteBackInvalidateDataCacheRange ((VOID *)ADB_REBOOT_ADDRESS, 4);
+ }
+ return EFI_SUCCESS;
+}
+
+PLATFORM_VIRTUAL_KBD_PROTOCOL mVirtualKeyboard = {
+ VirtualKeyboardRegister,
+ VirtualKeyboardReset,
+ VirtualKeyboardQuery,
+ VirtualKeyboardClear
+};
+
+EFI_STATUS
+EFIAPI
HiKeyEntryPoint (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
@@ -105,5 +196,12 @@ HiKeyEntryPoint (
if (EFI_ERROR (Status)) {
return Status;
}
+
+ Status = gBS->InstallProtocolInterface (
+ &ImageHandle,
+ &gPlatformVirtualKeyboardProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ &mVirtualKeyboard
+ );
return Status;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 10+ messages in thread