[platforms PATCH 1/4] Marvell/Armada70x0Db: Shift main FV from 0x0 address

[Marcin Wojtas <mw@semihalf.com>]

When using PEI phase, UEFI interprets 0x0 address
of boot FV as an error. In order to avoid it, shift
it to 0x1000 and put a hardcoded 'jump to 0x1000' at
offset 0x0. This patch is a preparation for using PEI
by Armada platforms.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
 Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf b/Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf
index befb107..69cb4cd 100644
--- a/Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf
+++ b/Platform/Marvell/Armada70x0Db/Armada70x0Db.fdf
@@ -49,7 +49,21 @@ NumBlocks     = 0x400
 #
 ################################################################################
 
-0x00000000|0x00100000
+#
+# UEFI has trouble dealing with FVs that reside at physical address 0x0.
+# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the
+# real FV at offset 0x1000
+#
+0x00000000|0x00001000
+DATA = {
+!if $(ARCH) == AARCH64
+  0x00, 0x04, 0x00, 0x14   # 'b 0x1000' in AArch64 ASM
+!else
+  0xfe, 0x03, 0x00, 0xea   # 'b 0x1000' in AArch32 ASM
+!endif
+}
+
+0x00001000|0x000ff000
 gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
 FV = FVMAIN_COMPACT
 
@@ -191,7 +205,6 @@ FvNameGuid         = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c
 # PEI phase firmware volume
 [FV.FVMAIN_COMPACT]
 FvAlignment        = 8
-FvForceRebase      = TRUE
 ERASE_POLARITY     = 1
 MEMORY_MAPPED      = TRUE
 STICKY_WRITE       = TRUE
-- 
2.7.4