From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, jinghua@marvell.com, mw@semihalf.com,
jsd@semihalf.com, jaz@semihalf.com
Subject: [platforms: PATCH 2/3] Marvell/Armada7k8k: Introduce support for Armada-8040-McBin
Date: Tue, 12 Jun 2018 16:06:34 +0200 [thread overview]
Message-ID: <1528812395-2716-3-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1528812395-2716-1-git-send-email-mw@semihalf.com>
Add new board description file Armada80x0McBin.dsc,
which uses common Armada7k8k.fdf file. By default
build capsule components.
Most of the interfaces are fully functional, except for:
- USB ports - it requires merging GPIO support and VBUS
power supply enabling
- SdMmc ports - they are kept enabled, as no issues were
observed on v1.3 board so far. However higher speed modes
(HS200) and full stability will be gained after Xenon
driver improvements merge.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc | 149 ++++++++++++++++++++
1 file changed, 149 insertions(+)
create mode 100644 Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
diff --git a/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc b/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
new file mode 100644
index 0000000..1a811d5
--- /dev/null
+++ b/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
@@ -0,0 +1,149 @@
+#Copyright (C) 2017 Marvell International Ltd.
+#
+#Marvell BSD License Option
+#
+#If you received this File from Marvell, you may opt to use, redistribute and/or
+#modify this File under the following licensing terms.
+#Redistribution and use in source and binary forms, with or without modification,
+#are permitted provided that the following conditions are met:
+#
+# * Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+#
+# * Neither the name of Marvell nor the names of its contributors may be
+# used to endorse or promote products derived from this software without
+# specific prior written permission.
+#
+#THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+#ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+#WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+#DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
+#ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+#(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+#LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+#ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+#(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+#SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = Armada80x0McBin
+ PLATFORM_GUID = 256e46dc-bff2-4e83-8ab3-6d2a3bec3f62
+ PLATFORM_VERSION = 0.1
+ DSC_SPECIFICATION = 0x00010019
+ OUTPUT_DIRECTORY = Build/$(PLATFORM_NAME)-$(ARCH)
+ SUPPORTED_ARCHITECTURES = AARCH64|ARM
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = Silicon/Marvell/Armada7k8k/Armada7k8k.fdf
+ CAPSULE_ENABLE = TRUE
+
+!include Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+[PcdsFixedAtBuild.common]
+ #MPP
+ gMarvellTokenSpaceGuid.PcdMppChipCount|3
+
+ # APN806-A0 MPP SET
+ gMarvellTokenSpaceGuid.PcdChip0MppReverseFlag|FALSE
+ gMarvellTokenSpaceGuid.PcdChip0MppBaseAddress|0xF06F4000
+ gMarvellTokenSpaceGuid.PcdChip0MppPinCount|20
+ gMarvellTokenSpaceGuid.PcdChip0MppSel0|{ 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 }
+ gMarvellTokenSpaceGuid.PcdChip0MppSel1|{ 0x1, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x3 }
+
+ # CP110 MPP SET - master
+ gMarvellTokenSpaceGuid.PcdChip1MppReverseFlag|FALSE
+ gMarvellTokenSpaceGuid.PcdChip1MppBaseAddress|0xF2440000
+ gMarvellTokenSpaceGuid.PcdChip1MppPinCount|64
+ gMarvellTokenSpaceGuid.PcdChip1MppSel0|{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
+ gMarvellTokenSpaceGuid.PcdChip1MppSel1|{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
+ gMarvellTokenSpaceGuid.PcdChip1MppSel2|{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
+ gMarvellTokenSpaceGuid.PcdChip1MppSel3|{ 0xFF, 0x0, 0x7, 0xA, 0x7, 0x2, 0x2, 0x2, 0x2, 0xA }
+ gMarvellTokenSpaceGuid.PcdChip1MppSel4|{ 0x7, 0x7, 0x8, 0x8, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
+ gMarvellTokenSpaceGuid.PcdChip1MppSel5|{ 0x0, 0x0, 0x9, 0x0, 0x0, 0x0, 0xE, 0xE, 0xE, 0xE }
+ gMarvellTokenSpaceGuid.PcdChip1MppSel6|{ 0xE, 0xE, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
+
+ # CP110 MPP SET - slave
+ gMarvellTokenSpaceGuid.PcdChip2MppReverseFlag|FALSE
+ gMarvellTokenSpaceGuid.PcdChip2MppBaseAddress|0xF4440000
+ gMarvellTokenSpaceGuid.PcdChip2MppPinCount|64
+ gMarvellTokenSpaceGuid.PcdChip2MppSel0|{ 0x4, 0x4, 0x4, 0x4, 0x4, 0x4, 0x8, 0x8, 0x0, 0x0 }
+ gMarvellTokenSpaceGuid.PcdChip2MppSel1|{ 0x0, 0x0, 0x3, 0x3, 0x3, 0x3, 0x3, 0xFF, 0xFF, 0xFF }
+ gMarvellTokenSpaceGuid.PcdChip2MppSel2|{ 0xFF, 0xFF, 0xFF, 0xFF, 0x0, 0xFF, 0x0, 0x0, 0x0, 0x0 }
+ gMarvellTokenSpaceGuid.PcdChip2MppSel3|{ 0x0, 0x0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
+ gMarvellTokenSpaceGuid.PcdChip2MppSel4|{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
+ gMarvellTokenSpaceGuid.PcdChip2MppSel5|{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
+ gMarvellTokenSpaceGuid.PcdChip2MppSel6|{ 0xFF, 0xFF, 0xFF, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0 }
+
+ #SPI
+ gMarvellTokenSpaceGuid.PcdSpiRegBase|0xF4700680
+ gMarvellTokenSpaceGuid.PcdSpiMaxFrequency|10000000
+ gMarvellTokenSpaceGuid.PcdSpiClockFrequency|200000000
+
+ gMarvellTokenSpaceGuid.PcdSpiFlashMode|3
+ gMarvellTokenSpaceGuid.PcdSpiFlashCs|0
+
+ #ComPhy
+ gMarvellTokenSpaceGuid.PcdComPhyDevices|{ 0x1, 0x1 }
+ # ComPhy0
+ # 0: PCIE0 5 Gbps
+ # 1: PCIE0 5 Gbps
+ # 2: PCIE0 5 Gbps
+ # 3: PCIE0 5 Gbps
+ # 4: SFI 10.31 Gbps
+ # 5: SATA1 5 Gbps
+ gMarvellTokenSpaceGuid.PcdChip0ComPhyTypes|{ $(CP_PCIE0), $(CP_PCIE0), $(CP_PCIE0), $(CP_PCIE0), $(CP_SFI), $(CP_SATA1)}
+ gMarvellTokenSpaceGuid.PcdChip0ComPhySpeeds|{ $(CP_5G), $(CP_5G), $(CP_5G), $(CP_5G), $(CP_10_3125G), $(CP_5G) }
+ # ComPhy1
+ # 0: SGMII1 1.25 Gbps
+ # 1: SATA0 5 Gbps
+ # 2: USB3_HOST0 5 Gbps
+ # 3: SATA1 5 Gbps
+ # 4: SFI 10.31 Gbps
+ # 5: SGMII2 3.125 Gbps
+ gMarvellTokenSpaceGuid.PcdChip1ComPhyTypes|{ $(CP_SGMII1), $(CP_SATA2), $(CP_USB3_HOST0), $(CP_SATA3), $(CP_SFI), $(CP_SGMII2) }
+ gMarvellTokenSpaceGuid.PcdChip1ComPhySpeeds|{ $(CP_1_25G), $(CP_5G), $(CP_5G), $(CP_5G), $(CP_10_3125G), $(CP_3_125G) }
+
+ #UtmiPhy
+ gMarvellTokenSpaceGuid.PcdUtmiControllersEnabled|{ 0x1, 0x1, 0x1, 0x0 }
+ gMarvellTokenSpaceGuid.PcdUtmiPortType|{ $(UTMI_USB_HOST0), $(UTMI_USB_HOST1), $(UTMI_USB_HOST0), $(UTMI_USB_HOST1) }
+
+ #MDIO
+ gMarvellTokenSpaceGuid.PcdMdioControllersEnabled|{ 0x1, 0x0 }
+
+ #PHY
+ gMarvellTokenSpaceGuid.PcdPhy2MdioController|{ 0x0 }
+ gMarvellTokenSpaceGuid.PcdPhyDeviceIds|{ 0x0 }
+ gMarvellTokenSpaceGuid.PcdPhySmiAddresses|{ 0x0 }
+ gMarvellTokenSpaceGuid.PcdPhyStartupAutoneg|FALSE
+
+ #NET
+ gMarvellTokenSpaceGuid.PcdPp2GopIndexes|{ 0x0, 0x0, 0x2, 0x3 }
+ gMarvellTokenSpaceGuid.PcdPp2InterfaceAlwaysUp|{ 0x0, 0x0, 0x0, 0x0 }
+ gMarvellTokenSpaceGuid.PcdPp2InterfaceSpeed|{ $(PHY_SPEED_10000), $(PHY_SPEED_10000), $(PHY_SPEED_1000), $(PHY_SPEED_2500) }
+ gMarvellTokenSpaceGuid.PcdPp2PhyConnectionTypes|{ $(PHY_SFI), $(PHY_SFI), $(PHY_SGMII), $(PHY_SGMII) }
+ gMarvellTokenSpaceGuid.PcdPp2PhyIndexes|{ 0xFF, 0xFF, 0x0, 0xFF }
+ gMarvellTokenSpaceGuid.PcdPp2Port2Controller|{ 0x0, 0x1, 0x1, 0x1 }
+ gMarvellTokenSpaceGuid.PcdPp2PortIds|{ 0x0, 0x0, 0x1, 0x2 }
+ gMarvellTokenSpaceGuid.PcdPp2Controllers|{ 0x1, 0x1 }
+
+ #PciEmulation
+ gMarvellTokenSpaceGuid.PcdPciEXhci|{ 0x1, 0x1, 0x1, 0x0 }
+ gMarvellTokenSpaceGuid.PcdPciEAhci|{ 0x1, 0x1 }
+ gMarvellTokenSpaceGuid.PcdPciESdhci|{ 0x1, 0x1 }
+
+ #RTC
+ gMarvellTokenSpaceGuid.PcdRtcEnabled|{ 0x0, 0x1 }
--
2.7.4
next prev parent reply other threads:[~2018-06-12 14:06 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-12 14:06 [platforms: PATCH 0/3] Armada7k8k new boards support Marcin Wojtas
2018-06-12 14:06 ` [platforms: PATCH 1/3] Marvell/Armada7k8k: Use common .fdf file Marcin Wojtas
2018-06-12 14:06 ` Marcin Wojtas [this message]
2018-06-12 14:11 ` [platforms: PATCH 2/3] Marvell/Armada7k8k: Introduce support for Armada-8040-McBin Ard Biesheuvel
2018-06-12 14:15 ` Marcin Wojtas
2018-06-12 14:23 ` Leif Lindholm
2018-06-12 14:27 ` Ard Biesheuvel
2018-06-12 14:33 ` Marcin Wojtas
2018-06-12 14:33 ` Leif Lindholm
2018-06-12 14:36 ` Marcin Wojtas
2018-06-12 14:06 ` [platforms: PATCH 3/3] Marvell/Armada7k8k: Introduce support for Armada-8040-Db Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1528812395-2716-3-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox