From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, jinghua@marvell.com, mw@semihalf.com,
jsd@semihalf.com, jaz@semihalf.com
Subject: [platforms: PATCH v2 20/25] Marvell/Drivers: MvMdioDxe: Enable 64bit addressing
Date: Sun, 17 Jun 2018 22:12:00 +0200 [thread overview]
Message-ID: <1529266325-18371-21-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1529266325-18371-1-git-send-email-mw@semihalf.com>
In order to be prepared for operating on registers
in 64-bit address space, this patch adjusts the
MDIO controllers base address array.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
Silicon/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Silicon/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c b/Silicon/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c
index 12aabad..6c0a129 100644
--- a/Silicon/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c
+++ b/Silicon/Marvell/Drivers/Net/MvMdioDxe/MvMdioDxe.c
@@ -70,7 +70,7 @@ MdioCheckParam (
STATIC
EFI_STATUS
MdioWaitReady (
- UINT32 MdioBase
+ UINTN MdioBase
)
{
UINT32 Timeout = MVEBU_SMI_TIMEOUT;
@@ -92,7 +92,7 @@ MdioWaitReady (
STATIC
EFI_STATUS
MdioWaitValid (
- UINT32 MdioBase
+ UINTN MdioBase
)
{
UINT32 Timeout = MVEBU_SMI_TIMEOUT;
@@ -122,7 +122,7 @@ MdioOperation (
IN OUT UINT32 *Data
)
{
- UINT32 MdioBase = This->BaseAddresses[MdioIndex];
+ UINTN MdioBase = This->BaseAddresses[MdioIndex];
UINT32 MdioReg;
EFI_STATUS Status;
--
2.7.4
next prev parent reply other threads:[~2018-06-17 20:12 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-17 20:11 [platforms: PATCH v2 00/25] Armada hardware description rework Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 01/25] Marvell/Library: Introduce ArmadaSoCDescLib class Marcin Wojtas
2018-06-18 15:44 ` Leif Lindholm
2018-06-18 15:58 ` Marcin Wojtas
2018-06-18 17:09 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 02/25] Marvell/Library: Introduce ArmadaBoardDescLib class Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 03/25] Marvell: Introduce MARVELL_BOARD_DESC_PROTOCOL Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 04/25] Marvell/Drivers: MvBoardDesc: Introduce board description driver Marcin Wojtas
2018-06-18 15:50 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 05/25] Marvell/Armada7k8k: Enable board description driver compilation Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 06/25] Marvell/Library: UtmiPhyLib: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 07/25] Marvell/Library: RealTimeClockLib: Simplify obtaining base address Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 08/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with PP2 information Marcin Wojtas
2018-06-18 15:51 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 09/25] Marvell/Drivers: MvBoardDesc: Extend protocol with PP2 support Marcin Wojtas
2018-06-18 15:53 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 10/25] Marvell/Drivers: Pp2Dxe: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-18 15:55 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 11/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with AHCI/SDMMC/XHCI Marcin Wojtas
2018-06-18 16:06 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 12/25] Marvell/Drivers: MvBoardDesc: Extend protocol " Marcin Wojtas
2018-06-18 16:09 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 13/25] Marvell/Drivers: NonDiscoverable: Switch to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 14/25] Marvell/Library: ComPhyLib: Get AHCI data with MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:15 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 15/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with ComPhy information Marcin Wojtas
2018-06-18 16:18 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 16/25] Marvell/Drivers: MvBoardDesc: Extend protocol with ComPhy support Marcin Wojtas
2018-06-18 16:19 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 17/25] Marvell/Library: ComPhyLib: Switch library to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:20 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 18/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with MDIO information Marcin Wojtas
2018-06-18 16:23 ` Leif Lindholm
2018-06-18 16:27 ` Marcin Wojtas
2018-06-18 17:16 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 19/25] Marvell/Drivers: MvBoardDesc: Extend protocol with MDIO support Marcin Wojtas
2018-06-18 16:44 ` Leif Lindholm
2018-06-17 20:12 ` Marcin Wojtas [this message]
2018-06-17 20:12 ` [platforms: PATCH v2 21/25] Marvell/Drivers: MvMdioDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:12 ` [platforms: PATCH v2 22/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with I2C information Marcin Wojtas
2018-06-18 16:45 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 23/25] Marvell/Drivers: MvBoardDesc: Extend protocol with I2C support Marcin Wojtas
2018-06-18 16:47 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 24/25] Marvell/Drivers: MvI2cDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:48 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 25/25] Marvell/Drivers: MvPhyDxe: Remove MvHwDescLib.h dependency Marcin Wojtas
2018-06-18 16:50 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529266325-18371-21-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox