From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, jinghua@marvell.com, mw@semihalf.com,
jsd@semihalf.com, jaz@semihalf.com
Subject: [platforms: PATCH v2 23/25] Marvell/Drivers: MvBoardDesc: Extend protocol with I2C support
Date: Sun, 17 Jun 2018 22:12:03 +0200 [thread overview]
Message-ID: <1529266325-18371-24-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1529266325-18371-1-git-send-email-mw@semihalf.com>
Introduce new callback that can provide information
about I2C controllers to the I2c driver.
Extend ArmadaBoardDescLib with new structure MV_BOARD_I2C_DESC,
for holding board specific data. In further steps it should
be extended and replace PCD I2C devices' representation with the
appropriate structures.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf | 1 +
Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h | 8 +++
Silicon/Marvell/Include/Protocol/BoardDesc.h | 8 +++
Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c | 66 ++++++++++++++++++++
4 files changed, 83 insertions(+)
diff --git a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf
index dea99fd..41f72d6 100644
--- a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf
+++ b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.inf
@@ -58,6 +58,7 @@
[Pcd]
gMarvellTokenSpaceGuid.PcdComPhyDevices
+ gMarvellTokenSpaceGuid.PcdI2cControllersEnabled
gMarvellTokenSpaceGuid.PcdPciEAhci
gMarvellTokenSpaceGuid.PcdPciESdhci
gMarvellTokenSpaceGuid.PcdPciEXhci
diff --git a/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h b/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h
index b11fa9d..ee8e06e 100644
--- a/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h
+++ b/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h
@@ -25,6 +25,14 @@ typedef struct {
} MV_BOARD_COMPHY_DESC;
//
+// I2C devices per-board description
+//
+typedef struct {
+ MV_SOC_I2C_DESC *SoC;
+ UINTN I2cDevCount;
+} MV_BOARD_I2C_DESC;
+
+//
// MDIO devices per-board description
//
typedef struct {
diff --git a/Silicon/Marvell/Include/Protocol/BoardDesc.h b/Silicon/Marvell/Include/Protocol/BoardDesc.h
index 55297f5..1d57a16 100644
--- a/Silicon/Marvell/Include/Protocol/BoardDesc.h
+++ b/Silicon/Marvell/Include/Protocol/BoardDesc.h
@@ -50,6 +50,13 @@ EFI_STATUS
typedef
EFI_STATUS
+(EFIAPI *MV_BOARD_DESC_I2C_GET) (
+ IN MARVELL_BOARD_DESC_PROTOCOL *This,
+ IN OUT MV_BOARD_I2C_DESC **I2cDesc
+ );
+
+typedef
+EFI_STATUS
(EFIAPI *MV_BOARD_DESC_MDIO_GET) (
IN MARVELL_BOARD_DESC_PROTOCOL *This,
IN OUT MV_BOARD_MDIO_DESC **MdioDesc
@@ -99,6 +106,7 @@ VOID
struct _MARVELL_BOARD_DESC_PROTOCOL {
MV_BOARD_DESC_AHCI_GET BoardDescAhciGet;
MV_BOARD_DESC_COMPHY_GET BoardDescComPhyGet;
+ MV_BOARD_DESC_I2C_GET BoardDescI2cGet;
MV_BOARD_DESC_MDIO_GET BoardDescMdioGet;
MV_BOARD_DESC_PP2_GET BoardDescPp2Get;
MV_BOARD_DESC_SDMMC_GET BoardDescSdMmcGet;
diff --git a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c
index 5dfc559..39dc06c 100644
--- a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c
+++ b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c
@@ -100,6 +100,71 @@ MvBoardDescComPhyGet (
STATIC
EFI_STATUS
+MvBoardDescI2cGet (
+ IN MARVELL_BOARD_DESC_PROTOCOL *This,
+ IN OUT MV_BOARD_I2C_DESC **I2cDesc
+ )
+{
+ UINT8 *I2cDeviceEnabled;
+ UINTN I2cCount, I2cDeviceEnabledSize, I2cIndex, Index;
+ MV_BOARD_I2C_DESC *BoardDesc;
+ MV_SOC_I2C_DESC *SoCDesc;
+ EFI_STATUS Status;
+
+ /* Get SoC data about all available I2C controllers */
+ Status = ArmadaSoCDescI2cGet (&SoCDesc, &I2cCount);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ /*
+ * Obtain table with enabled I2C controllers
+ * which is represented as an array of UINT8 values
+ * (0x0 - disabled, 0x1 enabled).
+ */
+ I2cDeviceEnabled = PcdGetPtr (PcdI2cControllersEnabled);
+ if (I2cDeviceEnabled == NULL) {
+ /* No I2C on platform */
+ return EFI_SUCCESS;
+ }
+
+ I2cDeviceEnabledSize = PcdGetSize (PcdI2cControllersEnabled);
+
+ /* Check if PCD with I2C controllers is correctly defined */
+ if (I2cDeviceEnabledSize > I2cCount) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Wrong PcdI2cControllersEnabled format\n",
+ __FUNCTION__));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ /* Allocate and fill board description */
+ BoardDesc = AllocateZeroPool (I2cDeviceEnabledSize * sizeof (MV_BOARD_I2C_DESC));
+ if (BoardDesc == NULL) {
+ DEBUG ((DEBUG_ERROR, "%a: Cannot allocate memory\n", __FUNCTION__));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ I2cIndex = 0;
+ for (Index = 0; Index < I2cDeviceEnabledSize; Index++) {
+ if (!I2cDeviceEnabled[Index]) {
+ DEBUG ((DEBUG_INFO, "%a: Skip I2c controller %d\n", __FUNCTION__, Index));
+ continue;
+ }
+
+ BoardDesc[I2cIndex].SoC = &SoCDesc[Index];
+ I2cIndex++;
+ }
+
+ BoardDesc->I2cDevCount = I2cIndex;
+
+ *I2cDesc = BoardDesc;
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
MvBoardDescMdioGet (
IN MARVELL_BOARD_DESC_PROTOCOL *This,
IN OUT MV_BOARD_MDIO_DESC **MdioDesc
@@ -491,6 +556,7 @@ MvBoardDescInitProtocol (
{
BoardDescProtocol->BoardDescAhciGet = MvBoardDescAhciGet;
BoardDescProtocol->BoardDescComPhyGet = MvBoardDescComPhyGet;
+ BoardDescProtocol->BoardDescI2cGet = MvBoardDescI2cGet;
BoardDescProtocol->BoardDescMdioGet = MvBoardDescMdioGet;
BoardDescProtocol->BoardDescPp2Get = MvBoardDescPp2Get;
BoardDescProtocol->BoardDescSdMmcGet = MvBoardDescSdMmcGet;
--
2.7.4
next prev parent reply other threads:[~2018-06-17 20:12 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-17 20:11 [platforms: PATCH v2 00/25] Armada hardware description rework Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 01/25] Marvell/Library: Introduce ArmadaSoCDescLib class Marcin Wojtas
2018-06-18 15:44 ` Leif Lindholm
2018-06-18 15:58 ` Marcin Wojtas
2018-06-18 17:09 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 02/25] Marvell/Library: Introduce ArmadaBoardDescLib class Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 03/25] Marvell: Introduce MARVELL_BOARD_DESC_PROTOCOL Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 04/25] Marvell/Drivers: MvBoardDesc: Introduce board description driver Marcin Wojtas
2018-06-18 15:50 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 05/25] Marvell/Armada7k8k: Enable board description driver compilation Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 06/25] Marvell/Library: UtmiPhyLib: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 07/25] Marvell/Library: RealTimeClockLib: Simplify obtaining base address Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 08/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with PP2 information Marcin Wojtas
2018-06-18 15:51 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 09/25] Marvell/Drivers: MvBoardDesc: Extend protocol with PP2 support Marcin Wojtas
2018-06-18 15:53 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 10/25] Marvell/Drivers: Pp2Dxe: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-18 15:55 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 11/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with AHCI/SDMMC/XHCI Marcin Wojtas
2018-06-18 16:06 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 12/25] Marvell/Drivers: MvBoardDesc: Extend protocol " Marcin Wojtas
2018-06-18 16:09 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 13/25] Marvell/Drivers: NonDiscoverable: Switch to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 14/25] Marvell/Library: ComPhyLib: Get AHCI data with MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:15 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 15/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with ComPhy information Marcin Wojtas
2018-06-18 16:18 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 16/25] Marvell/Drivers: MvBoardDesc: Extend protocol with ComPhy support Marcin Wojtas
2018-06-18 16:19 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 17/25] Marvell/Library: ComPhyLib: Switch library to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:20 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 18/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with MDIO information Marcin Wojtas
2018-06-18 16:23 ` Leif Lindholm
2018-06-18 16:27 ` Marcin Wojtas
2018-06-18 17:16 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 19/25] Marvell/Drivers: MvBoardDesc: Extend protocol with MDIO support Marcin Wojtas
2018-06-18 16:44 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 20/25] Marvell/Drivers: MvMdioDxe: Enable 64bit addressing Marcin Wojtas
2018-06-17 20:12 ` [platforms: PATCH v2 21/25] Marvell/Drivers: MvMdioDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:12 ` [platforms: PATCH v2 22/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with I2C information Marcin Wojtas
2018-06-18 16:45 ` Leif Lindholm
2018-06-17 20:12 ` Marcin Wojtas [this message]
2018-06-18 16:47 ` [platforms: PATCH v2 23/25] Marvell/Drivers: MvBoardDesc: Extend protocol with I2C support Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 24/25] Marvell/Drivers: MvI2cDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:48 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 25/25] Marvell/Drivers: MvPhyDxe: Remove MvHwDescLib.h dependency Marcin Wojtas
2018-06-18 16:50 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529266325-18371-24-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox