From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, jinghua@marvell.com, mw@semihalf.com,
jsd@semihalf.com, jaz@semihalf.com
Subject: [platforms: PATCH v2 24/25] Marvell/Drivers: MvI2cDxe: Switch driver to use MARVELL_BOARD_DESC
Date: Sun, 17 Jun 2018 22:12:04 +0200 [thread overview]
Message-ID: <1529266325-18371-25-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1529266325-18371-1-git-send-email-mw@semihalf.com>
MvI2cDxe driver used to get Armada7k8k controller description
from hardcoded values stored in the header file MvHwDescLib.h.
As a result it is very hard to support other
Armada SoC families with this driver.
This patch updates the driver, so that it can obtain the
description from newly introduced MARVELL_BOARD_DESC protocol,
and removes the dependency on the hardcoded structures.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.inf | 1 +
Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.c | 37 +++++++++-----------
2 files changed, 18 insertions(+), 20 deletions(-)
diff --git a/Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.inf b/Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.inf
index a7cf52e..0eef350 100755
--- a/Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.inf
+++ b/Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.inf
@@ -61,6 +61,7 @@
gEfiDevicePathProtocolGuid
gEfiI2cEnumerateProtocolGuid
gEfiI2cBusConfigurationManagementProtocolGuid
+ gMarvellBoardDescProtocolGuid
[Pcd]
gMarvellTokenSpaceGuid.PcdI2cSlaveAddresses
diff --git a/Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.c b/Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.c
index d6f590d..9ec4929 100755
--- a/Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.c
+++ b/Silicon/Marvell/Drivers/I2c/MvI2cDxe/MvI2cDxe.c
@@ -32,6 +32,7 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
+#include <Protocol/BoardDesc.h>
#include <Protocol/I2cMaster.h>
#include <Protocol/I2cEnumerate.h>
#include <Protocol/I2cBusConfigurationManagement.h>
@@ -43,13 +44,10 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#include <Library/PcdLib.h>
#include <Library/UefiLib.h>
#include <Library/MemoryAllocationLib.h>
-#include <Library/MvHwDescLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include "MvI2cDxe.h"
-DECLARE_A7K8K_I2C_TEMPLATE;
-
STATIC MV_I2C_BAUD_RATE baud_rate;
STATIC MV_I2C_DEVICE_PATH MvI2cDevicePathProtocol = {
@@ -174,38 +172,37 @@ MvI2cInitialise (
IN EFI_SYSTEM_TABLE *SystemTable
)
{
- MVHW_I2C_DESC *Desc = &mA7k8kI2cDescTemplate;
- UINT8 *I2cDeviceTable, Index;
+ MARVELL_BOARD_DESC_PROTOCOL *BoardDescProtocol;
+ MV_BOARD_I2C_DESC *Desc;
EFI_STATUS Status;
+ UINTN Index;
- /* Obtain table with enabled I2c devices */
- I2cDeviceTable = (UINT8 *)PcdGetPtr (PcdI2cControllersEnabled);
- if (I2cDeviceTable == NULL) {
- DEBUG ((DEBUG_ERROR, "Missing PcdI2cControllersEnabled\n"));
- return EFI_INVALID_PARAMETER;
+ /* Obtain list of available controllers */
+ Status = gBS->LocateProtocol (&gMarvellBoardDescProtocolGuid,
+ NULL,
+ (VOID **)&BoardDescProtocol);
+ if (EFI_ERROR (Status)) {
+ return Status;
}
- if (PcdGetSize (PcdI2cControllersEnabled) > MVHW_MAX_I2C_DEVS) {
- DEBUG ((DEBUG_ERROR, "Wrong PcdI2cControllersEnabled format\n"));
- return EFI_INVALID_PARAMETER;
+ Status = BoardDescProtocol->BoardDescI2cGet (BoardDescProtocol, &Desc);
+ if (EFI_ERROR (Status)) {
+ return Status;
}
/* Initialize enabled chips */
- for (Index = 0; Index < PcdGetSize (PcdI2cControllersEnabled); Index++) {
- if (!MVHW_DEV_ENABLED (I2c, Index)) {
- DEBUG ((DEBUG_ERROR, "Skip I2c chip %d\n", Index));
- continue;
- }
-
+ for (Index = 0; Index < Desc->I2cDevCount; Index++) {
Status = MvI2cInitialiseController(
ImageHandle,
SystemTable,
- Desc->I2cBaseAddresses[Index]
+ Desc[Index].SoC->I2cBaseAddress
);
if (EFI_ERROR(Status))
return Status;
}
+ BoardDescProtocol->BoardDescFree (Desc);
+
return EFI_SUCCESS;
}
--
2.7.4
next prev parent reply other threads:[~2018-06-17 20:12 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-17 20:11 [platforms: PATCH v2 00/25] Armada hardware description rework Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 01/25] Marvell/Library: Introduce ArmadaSoCDescLib class Marcin Wojtas
2018-06-18 15:44 ` Leif Lindholm
2018-06-18 15:58 ` Marcin Wojtas
2018-06-18 17:09 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 02/25] Marvell/Library: Introduce ArmadaBoardDescLib class Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 03/25] Marvell: Introduce MARVELL_BOARD_DESC_PROTOCOL Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 04/25] Marvell/Drivers: MvBoardDesc: Introduce board description driver Marcin Wojtas
2018-06-18 15:50 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 05/25] Marvell/Armada7k8k: Enable board description driver compilation Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 06/25] Marvell/Library: UtmiPhyLib: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 07/25] Marvell/Library: RealTimeClockLib: Simplify obtaining base address Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 08/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with PP2 information Marcin Wojtas
2018-06-18 15:51 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 09/25] Marvell/Drivers: MvBoardDesc: Extend protocol with PP2 support Marcin Wojtas
2018-06-18 15:53 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 10/25] Marvell/Drivers: Pp2Dxe: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-18 15:55 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 11/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with AHCI/SDMMC/XHCI Marcin Wojtas
2018-06-18 16:06 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 12/25] Marvell/Drivers: MvBoardDesc: Extend protocol " Marcin Wojtas
2018-06-18 16:09 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 13/25] Marvell/Drivers: NonDiscoverable: Switch to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 14/25] Marvell/Library: ComPhyLib: Get AHCI data with MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:15 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 15/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with ComPhy information Marcin Wojtas
2018-06-18 16:18 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 16/25] Marvell/Drivers: MvBoardDesc: Extend protocol with ComPhy support Marcin Wojtas
2018-06-18 16:19 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 17/25] Marvell/Library: ComPhyLib: Switch library to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:20 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 18/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with MDIO information Marcin Wojtas
2018-06-18 16:23 ` Leif Lindholm
2018-06-18 16:27 ` Marcin Wojtas
2018-06-18 17:16 ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 19/25] Marvell/Drivers: MvBoardDesc: Extend protocol with MDIO support Marcin Wojtas
2018-06-18 16:44 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 20/25] Marvell/Drivers: MvMdioDxe: Enable 64bit addressing Marcin Wojtas
2018-06-17 20:12 ` [platforms: PATCH v2 21/25] Marvell/Drivers: MvMdioDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:12 ` [platforms: PATCH v2 22/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with I2C information Marcin Wojtas
2018-06-18 16:45 ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 23/25] Marvell/Drivers: MvBoardDesc: Extend protocol with I2C support Marcin Wojtas
2018-06-18 16:47 ` Leif Lindholm
2018-06-17 20:12 ` Marcin Wojtas [this message]
2018-06-18 16:48 ` [platforms: PATCH v2 24/25] Marvell/Drivers: MvI2cDxe: Switch driver to use MARVELL_BOARD_DESC Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 25/25] Marvell/Drivers: MvPhyDxe: Remove MvHwDescLib.h dependency Marcin Wojtas
2018-06-18 16:50 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1529266325-18371-25-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox