public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
	nadavh@marvell.com, jinghua@marvell.com, mw@semihalf.com,
	jsd@semihalf.com, jaz@semihalf.com
Subject: [platforms: PATCH v2 06/25] Marvell/Library: UtmiPhyLib: Switch to use MARVELL_BOARD_DESC protocol
Date: Sun, 17 Jun 2018 22:11:46 +0200	[thread overview]
Message-ID: <1529266325-18371-7-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1529266325-18371-1-git-send-email-mw@semihalf.com>

UTMI driver used to get Armada7k8k UTMI controller description from
hardcoded values stored in the header file MvHwDescLib.h.
As a result it is very hard to support other Armada SoC families
with this driver.

This patch updates the driver to get UTMI controller description from
newly introduced MARVELL_BOARD_DESC protocol, and removes the dependency
on the hardcoded structures. Use the protocol and pass information to
further to the library init routine.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
---
 Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf |  1 -
 Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf                  |  9 ++-
 Silicon/Marvell/Include/Library/MvHwDescLib.h                      | 47 --------------
 Silicon/Marvell/Include/Library/UtmiPhyLib.h                       |  2 +
 Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h                    |  5 ++
 Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c                    | 65 +++++++-------------
 6 files changed, 32 insertions(+), 97 deletions(-)

diff --git a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf
index d38b467..f2c173c 100644
--- a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf
+++ b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kLib/Armada7k8kLib.inf
@@ -51,7 +51,6 @@
   DebugLib
   MemoryAllocationLib
   MppLib
-  UtmiPhyLib
 
 [Sources.common]
   Armada7k8kLib.c
diff --git a/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf b/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf
index 0876879..e2381f4 100644
--- a/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf
+++ b/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.inf
@@ -51,11 +51,10 @@
   IoLib
   MemoryAllocationLib
   PcdLib
+  UefiBootServicesTableLib
+
+[Protocols]
+  gMarvellBoardDescProtocolGuid  ## CONSUMES
 
 [Sources.common]
   UtmiPhyLib.c
-
-[Pcd]
-  gMarvellTokenSpaceGuid.PcdUtmiControllersEnabled
-  gMarvellTokenSpaceGuid.PcdUtmiPortType
-  gMarvellTokenSpaceGuid.PcdPciEXhci
diff --git a/Silicon/Marvell/Include/Library/MvHwDescLib.h b/Silicon/Marvell/Include/Library/MvHwDescLib.h
index 9ae03d0..e13814a 100644
--- a/Silicon/Marvell/Include/Library/MvHwDescLib.h
+++ b/Silicon/Marvell/Include/Library/MvHwDescLib.h
@@ -127,19 +127,6 @@ typedef struct {
 } MVHW_RTC_DESC;
 
 //
-// UTMI PHY's description template definition
-//
-
-typedef struct {
-  UINT8 UtmiDevCount;
-  UINT32 UtmiPhyId[MVHW_MAX_XHCI_DEVS];
-  UINTN UtmiBaseAddresses[MVHW_MAX_XHCI_DEVS];
-  UINTN UtmiConfigAddresses[MVHW_MAX_XHCI_DEVS];
-  UINTN UtmiUsbConfigAddresses[MVHW_MAX_XHCI_DEVS];
-  UINTN UtmiMuxBitCount[MVHW_MAX_XHCI_DEVS];
-} MVHW_UTMI_DESC;
-
-//
 // Platform description of CommonPhy devices
 //
 #define MVHW_CP0_COMPHY_BASE       0xF2441000
@@ -253,38 +240,4 @@ MVHW_RTC_DESC mA7k8kRtcDescTemplate = {\
   { SIZE_4KB, SIZE_4KB }\
 }
 
-//
-// Platform description of UTMI PHY's
-//
-#define MVHW_CP0_UTMI0_BASE            0xF2580000
-#define MVHW_CP0_UTMI0_CFG_BASE        0xF2440440
-#define MVHW_CP0_UTMI0_USB_CFG_BASE    0xF2440420
-#define MVHW_CP0_UTMI0_ID              0x0
-#define MVHW_CP0_UTMI1_BASE            0xF2581000
-#define MVHW_CP0_UTMI1_CFG_BASE        0xF2440444
-#define MVHW_CP0_UTMI1_USB_CFG_BASE    0xF2440420
-#define MVHW_CP0_UTMI1_ID              0x1
-#define MVHW_CP1_UTMI0_BASE            0xF4580000
-#define MVHW_CP1_UTMI0_CFG_BASE        0xF4440440
-#define MVHW_CP1_UTMI0_USB_CFG_BASE    0xF4440420
-#define MVHW_CP1_UTMI0_ID              0x0
-#define MVHW_CP1_UTMI1_BASE            0xF4581000
-#define MVHW_CP1_UTMI1_CFG_BASE        0xF4440444
-#define MVHW_CP1_UTMI1_USB_CFG_BASE    0xF4440420
-#define MVHW_CP1_UTMI1_ID              0x1
-
-#define DECLARE_A7K8K_UTMI_TEMPLATE \
-STATIC \
-MVHW_UTMI_DESC mA7k8kUtmiDescTemplate = {\
-  4,\
-  { MVHW_CP0_UTMI0_ID, MVHW_CP0_UTMI1_ID,\
-    MVHW_CP1_UTMI0_ID, MVHW_CP1_UTMI1_ID },\
-  { MVHW_CP0_UTMI0_BASE, MVHW_CP0_UTMI1_BASE,\
-    MVHW_CP1_UTMI0_BASE, MVHW_CP1_UTMI1_BASE },\
-  { MVHW_CP0_UTMI0_CFG_BASE, MVHW_CP0_UTMI1_CFG_BASE,\
-    MVHW_CP1_UTMI0_CFG_BASE, MVHW_CP1_UTMI1_CFG_BASE },\
-  { MVHW_CP0_UTMI0_USB_CFG_BASE, MVHW_CP0_UTMI1_USB_CFG_BASE,\
-    MVHW_CP1_UTMI0_USB_CFG_BASE, MVHW_CP1_UTMI1_USB_CFG_BASE }\
-}
-
 #endif /* __MVHWDESCLIB_H__ */
diff --git a/Silicon/Marvell/Include/Library/UtmiPhyLib.h b/Silicon/Marvell/Include/Library/UtmiPhyLib.h
index 7c62cba..6f4e355 100644
--- a/Silicon/Marvell/Include/Library/UtmiPhyLib.h
+++ b/Silicon/Marvell/Include/Library/UtmiPhyLib.h
@@ -35,6 +35,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #ifndef __UTMIPHYLIB_H__
 #define __UTMIPHYLIB_H__
 
+#include <Library/ArmadaBoardDescLib.h>
+
 EFI_STATUS
 UtmiPhyInit (
   VOID
diff --git a/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h b/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h
index 0d7d72e..7e56f1a 100644
--- a/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h
+++ b/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.h
@@ -35,6 +35,8 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #ifndef __UTMIPHY_H__
 #define __UTMIPHY_H__
 
+#include <Uefi.h>
+
 #include <Library/ArmLib.h>
 #include <Library/ArmPlatformLib.h>
 #include <Library/DebugLib.h>
@@ -42,6 +44,9 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 #include <Library/MemoryAllocationLib.h>
 #include <Library/IoLib.h>
 #include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+
+#include <Protocol/BoardDesc.h>
 
 #define UTMI_USB_CFG_DEVICE_EN_OFFSET             0
 #define UTMI_USB_CFG_DEVICE_EN_MASK               (0x1 << UTMI_USB_CFG_DEVICE_EN_OFFSET)
diff --git a/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c b/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c
index 2cd9cfa..cef1279 100644
--- a/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c
+++ b/Silicon/Marvell/Library/UtmiPhyLib/UtmiPhyLib.c
@@ -33,9 +33,6 @@ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************/
 
 #include "UtmiPhyLib.h"
-#include <Library/MvHwDescLib.h>
-
-DECLARE_A7K8K_UTMI_TEMPLATE;
 
 typedef struct {
   EFI_PHYSICAL_ADDRESS UtmiBaseAddr;
@@ -288,67 +285,47 @@ UtmiPhyInit (
   VOID
   )
 {
+  MARVELL_BOARD_DESC_PROTOCOL *BoardDescProtocol;
+  MV_BOARD_UTMI_DESC *BoardDesc;
   UTMI_PHY_DATA UtmiData;
-  UINT8 *UtmiDeviceTable, *XhciDeviceTable, *UtmiPortType, Index;
-  MVHW_UTMI_DESC *Desc = &mA7k8kUtmiDescTemplate;
-
-  /* Obtain table with enabled Utmi PHY's*/
-  UtmiDeviceTable = (UINT8 *)PcdGetPtr (PcdUtmiControllersEnabled);
-  if (UtmiDeviceTable == NULL) {
-    /* No UTMI PHY on platform */
-    return EFI_SUCCESS;
-  }
-
-  if (PcdGetSize (PcdUtmiControllersEnabled) > MVHW_MAX_XHCI_DEVS) {
-    DEBUG ((DEBUG_ERROR, "UTMI: Wrong PcdUtmiControllersEnabled format\n"));
-    return EFI_INVALID_PARAMETER;
-  }
+  EFI_STATUS Status;
+  UINTN Index;
 
-  /* Make sure XHCI controllers table is present */
-  XhciDeviceTable = (UINT8 *)PcdGetPtr (PcdPciEXhci);
-  if (XhciDeviceTable == NULL) {
-    DEBUG ((DEBUG_ERROR, "UTMI: Missing PcdPciEXhci\n"));
-    return EFI_INVALID_PARAMETER;
+  /* Obtain board description */
+  Status = gBS->LocateProtocol (&gMarvellBoardDescProtocolGuid,
+                  NULL,
+                  (VOID **)&BoardDescProtocol);
+  if (EFI_ERROR (Status)) {
+    return Status;
   }
 
-  /* Obtain port type table */
-  UtmiPortType = (UINT8 *)PcdGetPtr (PcdUtmiPortType);
-  if (UtmiPortType == NULL ||
-      PcdGetSize (PcdUtmiPortType) != PcdGetSize (PcdUtmiControllersEnabled)) {
-    DEBUG ((DEBUG_ERROR, "UTMI: Wrong PcdUtmiPortType format\n"));
-    return EFI_INVALID_PARAMETER;
+  Status = BoardDescProtocol->BoardDescUtmiGet (BoardDescProtocol, &BoardDesc);
+  if (EFI_ERROR (Status)) {
+    return Status;
   }
 
   /* Initialize enabled chips */
-  for (Index = 0; Index < PcdGetSize (PcdUtmiControllersEnabled); Index++) {
-    if (!MVHW_DEV_ENABLED (Utmi, Index)) {
-      continue;
-    }
-
-    /* UTMI PHY without enabled XHCI controller is useless */
-    if (!MVHW_DEV_ENABLED (Xhci, Index)) {
-      DEBUG ((DEBUG_ERROR, "UTMI: Disabled Xhci controller %d\n", Index));
-      return EFI_INVALID_PARAMETER;
-    }
-
+  for (Index = 0; Index < BoardDesc->UtmiDevCount; Index++) {
     /* Get base address of UTMI phy */
-    UtmiData.UtmiBaseAddr = Desc->UtmiBaseAddresses[Index];
+    UtmiData.UtmiBaseAddr = BoardDesc[Index].SoC->UtmiBaseAddress;
 
     /* Get usb config address */
-    UtmiData.UsbCfgAddr = Desc->UtmiUsbConfigAddresses[Index];
+    UtmiData.UsbCfgAddr = BoardDesc[Index].SoC->UsbConfigAddress;
 
     /* Get UTMI config address */
-    UtmiData.UtmiCfgAddr = Desc->UtmiConfigAddresses[Index];
+    UtmiData.UtmiCfgAddr = BoardDesc[Index].SoC->UtmiConfigAddress;
 
     /* Get UTMI PHY ID */
-    UtmiData.PhyId = Desc->UtmiPhyId[Index];
+    UtmiData.PhyId = BoardDesc[Index].SoC->UtmiPhyId;
 
     /* Get the usb port type */
-    UtmiData.UtmiPhyPort = UtmiPortType[Index];
+    UtmiData.UtmiPhyPort = BoardDesc[Index].UtmiPortType;
 
     /* Currently only Cp110 is supported */
     Cp110UtmiPhyInit (&UtmiData);
   }
 
+  BoardDescProtocol->BoardDescFree (BoardDesc);
+
   return EFI_SUCCESS;
 }
-- 
2.7.4



  parent reply	other threads:[~2018-06-17 20:12 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-17 20:11 [platforms: PATCH v2 00/25] Armada hardware description rework Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 01/25] Marvell/Library: Introduce ArmadaSoCDescLib class Marcin Wojtas
2018-06-18 15:44   ` Leif Lindholm
2018-06-18 15:58     ` Marcin Wojtas
2018-06-18 17:09       ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 02/25] Marvell/Library: Introduce ArmadaBoardDescLib class Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 03/25] Marvell: Introduce MARVELL_BOARD_DESC_PROTOCOL Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 04/25] Marvell/Drivers: MvBoardDesc: Introduce board description driver Marcin Wojtas
2018-06-18 15:50   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 05/25] Marvell/Armada7k8k: Enable board description driver compilation Marcin Wojtas
2018-06-17 20:11 ` Marcin Wojtas [this message]
2018-06-17 20:11 ` [platforms: PATCH v2 07/25] Marvell/Library: RealTimeClockLib: Simplify obtaining base address Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 08/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with PP2 information Marcin Wojtas
2018-06-18 15:51   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 09/25] Marvell/Drivers: MvBoardDesc: Extend protocol with PP2 support Marcin Wojtas
2018-06-18 15:53   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 10/25] Marvell/Drivers: Pp2Dxe: Switch to use MARVELL_BOARD_DESC protocol Marcin Wojtas
2018-06-18 15:55   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 11/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with AHCI/SDMMC/XHCI Marcin Wojtas
2018-06-18 16:06   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 12/25] Marvell/Drivers: MvBoardDesc: Extend protocol " Marcin Wojtas
2018-06-18 16:09   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 13/25] Marvell/Drivers: NonDiscoverable: Switch to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:11 ` [platforms: PATCH v2 14/25] Marvell/Library: ComPhyLib: Get AHCI data with MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:15   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 15/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with ComPhy information Marcin Wojtas
2018-06-18 16:18   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 16/25] Marvell/Drivers: MvBoardDesc: Extend protocol with ComPhy support Marcin Wojtas
2018-06-18 16:19   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 17/25] Marvell/Library: ComPhyLib: Switch library to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:20   ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 18/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with MDIO information Marcin Wojtas
2018-06-18 16:23   ` Leif Lindholm
2018-06-18 16:27     ` Marcin Wojtas
2018-06-18 17:16       ` Leif Lindholm
2018-06-17 20:11 ` [platforms: PATCH v2 19/25] Marvell/Drivers: MvBoardDesc: Extend protocol with MDIO support Marcin Wojtas
2018-06-18 16:44   ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 20/25] Marvell/Drivers: MvMdioDxe: Enable 64bit addressing Marcin Wojtas
2018-06-17 20:12 ` [platforms: PATCH v2 21/25] Marvell/Drivers: MvMdioDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-17 20:12 ` [platforms: PATCH v2 22/25] Marvell/Armada7k8k: Extend ArmadaSoCDescLib with I2C information Marcin Wojtas
2018-06-18 16:45   ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 23/25] Marvell/Drivers: MvBoardDesc: Extend protocol with I2C support Marcin Wojtas
2018-06-18 16:47   ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 24/25] Marvell/Drivers: MvI2cDxe: Switch driver to use MARVELL_BOARD_DESC Marcin Wojtas
2018-06-18 16:48   ` Leif Lindholm
2018-06-17 20:12 ` [platforms: PATCH v2 25/25] Marvell/Drivers: MvPhyDxe: Remove MvHwDescLib.h dependency Marcin Wojtas
2018-06-18 16:50   ` Leif Lindholm

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1529266325-18371-7-git-send-email-mw@semihalf.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox