From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, mw@semihalf.com, jsd@semihalf.com,
jaz@semihalf.com
Subject: [platforms: PATCH v2 5/9] Marvell/Armada80x0McBin: Enable device tree support
Date: Tue, 7 Aug 2018 10:58:14 +0200 [thread overview]
Message-ID: <1533632298-4981-6-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1533632298-4981-1-git-send-email-mw@semihalf.com>
This patch enables compilation of the Armada 8040 MacchiatoBin
device tree. Dsable OS acccess to the SPI flash and extend
PCI ranges to use 256MB mmio32 and 4GB mmio64.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc | 3 +++
Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf | 28 ++++++++++++++++++++
Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.fdf.inc | 3 +++
Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts | 5 +++-
4 files changed, 38 insertions(+), 1 deletion(-)
create mode 100644 Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
diff --git a/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc b/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
index e1f5827..e6cb0d6 100644
--- a/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
+++ b/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.dsc
@@ -49,6 +49,9 @@
!include Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
+[Components.common]
+ Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
+
################################################################################
#
# Pcd Section - list of all EDK II PCD Entries defined by this Platform
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
new file mode 100644
index 0000000..810a52b
--- /dev/null
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
@@ -0,0 +1,28 @@
+## @file
+#
+# Device tree description of the Marvell Armada 8040 MacchiatoBin platform
+#
+# Copyright (c) 2018, Marvell International Ltd. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = Armada80x0McBinDeviceTree
+ FILE_GUID = 25462CDA-221F-47DF-AC1D-259CFAA4E326 # gDtPlatformDefaultDtbFileGuid
+ MODULE_TYPE = USER_DEFINED
+ VERSION_STRING = 1.0
+
+[Sources]
+ armada-8040-mcbin.dts
+
+[Packages]
+ MdePkg/MdePkg.dec
diff --git a/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.fdf.inc b/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.fdf.inc
index 984cf7e..4eb1496 100644
--- a/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.fdf.inc
+++ b/Platform/SolidRun/Armada80x0McBin/Armada80x0McBin.fdf.inc
@@ -11,3 +11,6 @@
#
# Per-board additional content of the DXE phase firmware volume
+
+ # DTB
+ INF RuleOverride = DTB Silicon/Marvell/Armada7k8k/DeviceTree/Armada80x0McBin.inf
diff --git a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
index 0e20e70..b86e27e 100644
--- a/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
+++ b/Silicon/Marvell/Armada7k8k/DeviceTree/armada-8040-mcbin.dts
@@ -185,6 +185,9 @@
num-lanes = <4>;
num-viewport = <8>;
reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
+ ranges = <0x1000000 0x0 0x00000000 0x0 0xeff00000 0x0 0x00010000>,
+ <0x2000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>,
+ <0x3000000 0x8 0x00000000 0x8 0x00000000 0x1 0x00000000>;
status = "okay";
};
@@ -355,7 +358,7 @@
&cp1_spi1 {
pinctrl-names = "default";
pinctrl-0 = <&cp1_spi1_pins>;
- status = "okay";
+ status = "disabled";
spi-flash@0 {
compatible = "st,w25q32";
--
2.7.4
next prev parent reply other threads:[~2018-08-07 9:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-07 8:58 [platforms: PATCH v2 0/9] Armada7k8k DT/ACPI support Marcin Wojtas
2018-08-07 8:58 ` [platforms: PATCH v2 1/9] Marvell/Armada7k8k: Import device tree Marcin Wojtas
2018-08-07 8:58 ` [platforms: PATCH v2 2/9] Marvell/Armada7k8k: Enable including additional DXE FV components Marcin Wojtas
2018-08-07 8:58 ` [platforms: PATCH v2 3/9] Marvell/Armada70x0Db: Enable device tree support Marcin Wojtas
2018-08-07 8:58 ` [platforms: PATCH v2 4/9] Marvell/Armada80x0Db: " Marcin Wojtas
2018-08-07 8:58 ` Marcin Wojtas [this message]
2018-08-07 8:58 ` [platforms: PATCH v2 6/9] Marvell/Armada7k8k: Add common ACPI tables Marcin Wojtas
2018-08-07 8:58 ` [platforms: PATCH v2 7/9] Marvell/Armada70x0Db: Enable ACPI support Marcin Wojtas
2018-08-07 8:58 ` [platforms: PATCH v2 8/9] Marvell/Armada80x0Db: " Marcin Wojtas
2018-08-07 8:58 ` [platforms: PATCH v2 9/9] Marvell/Armada80x0McBin: " Marcin Wojtas
2018-08-07 9:18 ` [platforms: PATCH v2 0/9] Armada7k8k DT/ACPI support Ard Biesheuvel
2018-08-07 11:28 ` Marcin Wojtas
2018-08-07 21:48 ` Mark Kettenis
2018-08-07 23:03 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1533632298-4981-6-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox