From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, mw@semihalf.com, jsd@semihalf.com,
jaz@semihalf.com, kostap@marvell.com
Subject: [platforms: PATCH 02/12] Marvell/Library: ArmadaBoardDescLib: Add GPIO information
Date: Sat, 20 Oct 2018 03:57:31 +0200 [thread overview]
Message-ID: <1540000661-1956-3-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1540000661-1956-1-git-send-email-mw@semihalf.com>
This patch extends library with GPIO devices per-board
description. Both embedded SoC controllers and
I2C IO expanders are supported. Add a helper routine
for obtaining information about the latter.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h | 23 ++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h b/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h
index ee8e06e..109164c 100644
--- a/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h
+++ b/Silicon/Marvell/Include/Library/ArmadaBoardDescLib.h
@@ -25,6 +25,29 @@ typedef struct {
} MV_BOARD_COMPHY_DESC;
//
+// GPIO devices per-board description
+//
+typedef struct {
+ UINTN ChipId;
+ UINTN I2cAddress;
+ UINTN I2cBus;
+} MV_I2C_IO_EXPANDER_DESC;
+
+typedef struct {
+ MV_SOC_GPIO_DESC *SoC;
+ UINTN GpioDevCount;
+ MV_I2C_IO_EXPANDER_DESC *I2cIoExpanderDesc;
+ UINTN I2cIoExpanderCount;
+} MV_BOARD_GPIO_DESC;
+
+EFI_STATUS
+EFIAPI
+ArmadaBoardDescGpioGet (
+ IN OUT MV_I2C_IO_EXPANDER_DESC **I2cIoExpanderDesc,
+ IN OUT UINTN *I2cIoExpanderCount
+ );
+
+//
// I2C devices per-board description
//
typedef struct {
--
2.7.4
next prev parent reply other threads:[~2018-10-20 1:58 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-20 1:57 [platforms: PATCH 00/12] Armada7k8k GPIO support Marcin Wojtas
2018-10-20 1:57 ` [platforms: PATCH 01/12] Marvell/Library: ArmadaSoCDescLib: Add GPIO information Marcin Wojtas
2018-11-14 1:10 ` Leif Lindholm
2018-11-14 6:05 ` Marcin Wojtas
2018-11-14 17:33 ` Leif Lindholm
2018-11-21 1:26 ` Marcin Wojtas
2018-11-26 14:49 ` Leif Lindholm
2018-10-20 1:57 ` Marcin Wojtas [this message]
2018-11-14 1:12 ` [platforms: PATCH 02/12] Marvell/Library: ArmadaBoardDescLib: " Leif Lindholm
2018-11-14 6:16 ` Marcin Wojtas
2018-11-14 17:29 ` Leif Lindholm
2018-12-04 15:18 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 03/12] SolidRun/Armada80x0McBin: Introduce board description library Marcin Wojtas
2018-12-04 15:23 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 04/12] Marvell/Armada70x0Db: " Marcin Wojtas
2018-12-04 15:27 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 05/12] Marvell/Armada80x0Db: " Marcin Wojtas
2018-12-04 15:31 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 06/12] Marvell/Drivers: MvBoardDesc: Extend protocol with GPIO support Marcin Wojtas
2018-12-04 15:42 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 07/12] Marvell/Protocol: Introduce MARVELL_GPIO_PROTOCOL Marcin Wojtas
2018-12-04 16:00 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 08/12] Marvell/Drivers: MvGpioDxe: Introduce platform GPIO driver Marcin Wojtas
2018-12-04 16:37 ` Leif Lindholm
2018-12-04 16:40 ` Ard Biesheuvel
2018-12-04 17:19 ` Leif Lindholm
2018-12-04 17:20 ` Ard Biesheuvel
2018-10-20 1:57 ` [platforms: PATCH 09/12] Marvell/Drivers: I2c: Use common header for macros Marcin Wojtas
2018-12-04 16:38 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 10/12] Marvell/Drivers: MvPca95xxDxe: Introduce I2C GPIO driver Marcin Wojtas
2018-12-04 17:02 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 11/12] Marvell/Armada7k8k: Enable GPIO drivers compilation Marcin Wojtas
2018-12-04 17:06 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 12/12] Marvell/Armada7k8k: Introduce NonDiscoverable device init routines Marcin Wojtas
2018-12-04 17:16 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540000661-1956-3-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox