From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, mw@semihalf.com, jsd@semihalf.com,
jaz@semihalf.com, kostap@marvell.com,
jinghua <jinghua@marvell.com>
Subject: [platforms: PATCH 08/12] Marvell/Drivers: MvGpioDxe: Introduce platform GPIO driver
Date: Sat, 20 Oct 2018 03:57:37 +0200 [thread overview]
Message-ID: <1540000661-1956-9-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1540000661-1956-1-git-send-email-mw@semihalf.com>
From: jinghua <jinghua@marvell.com>
Marvell Armada 7k/8k SoCs comprise integrated GPIO controllers,
one in AP and two in each possible CP hardware blocks.
This patch introduces support for them, which is a producer of
MARVELL_GPIO_PROTOCOL, which add necessary routines.
Hardware description of the controllers is placed in MvHwDescLib.c,
same as other devices.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf | 43 +++
Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h | 52 ++++
Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c | 298 ++++++++++++++++++++
3 files changed, 393 insertions(+)
create mode 100644 Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf
create mode 100644 Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h
create mode 100644 Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c
diff --git a/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf
new file mode 100644
index 0000000..2d56433
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf
@@ -0,0 +1,43 @@
+## @file
+#
+# Copyright (c) 2017, Marvell International Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = MvGpioDxe
+ FILE_GUID = 706eb761-b3b5-4f41-8558-5fd9217c0079
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = MvGpioEntryPoint
+
+[Sources]
+ MvGpioDxe.c
+ MvGpioDxe.h
+
+[Packages]
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Marvell/Marvell.dec
+
+[LibraryClasses]
+ ArmadaSoCDescLib
+ DebugLib
+ MemoryAllocationLib
+ UefiDriverEntryPoint
+ UefiLib
+
+[Protocols]
+ gMarvellBoardDescProtocolGuid
+ gMarvellGpioProtocolGuid
+
+[Depex]
+ TRUE
diff --git a/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h
new file mode 100644
index 0000000..48744dc
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h
@@ -0,0 +1,52 @@
+/**
+*
+* Copyright (c) 2018, Marvell International Ltd. All rights reserved.
+*
+* This program and the accompanying materials are licensed and made available
+* under the terms and conditions of the BSD License which accompanies this
+* distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+#ifndef __MV_GPIO_H__
+#define __MV_GPIO_H__
+
+
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/IoLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <Protocol/BoardDesc.h>
+#include <Protocol/MvGpio.h>
+
+#include <Uefi/UefiBaseType.h>
+
+#define GPIO_SIGNATURE SIGNATURE_32 ('G', 'P', 'I', 'O')
+
+#ifndef BIT
+#define BIT(nr) (1 << (nr))
+#endif
+
+// Marvell GPIO Controller Registers
+#define GPIO_DATA_OUT_REG (0x0)
+#define GPIO_OUT_EN_REG (0x4)
+#define GPIO_BLINK_EN_REG (0x8)
+#define GPIO_DATA_IN_POL_REG (0xc)
+#define GPIO_DATA_IN_REG (0x10)
+
+typedef struct {
+ MARVELL_GPIO_PROTOCOL GpioProtocol;
+ MV_BOARD_GPIO_DESC *Desc;
+ UINTN Signature;
+ EFI_HANDLE Handle;
+} MV_GPIO;
+
+#endif // __MV_GPIO_H__
diff --git a/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c
new file mode 100644
index 0000000..fc2d416
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c
@@ -0,0 +1,298 @@
+/**
+*
+* Copyright (c) 2018, Marvell International Ltd. All rights reserved.
+*
+* This program and the accompanying materials are licensed and made available
+* under the terms and conditions of the BSD License which accompanies this
+* distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include "MvGpioDxe.h"
+
+STATIC MV_GPIO *mGpioInstance;
+
+STATIC MV_GPIO_DEVICE_PATH mGpioDevicePathTemplate = {
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_VENDOR_DP,
+ {
+ (UINT8) (sizeof (VENDOR_DEVICE_PATH) +
+ sizeof (MARVELL_GPIO_DRIVER_TYPE)),
+ (UINT8) ((sizeof (VENDOR_DEVICE_PATH) +
+ sizeof (MARVELL_GPIO_DRIVER_TYPE)) >> 8),
+ },
+ },
+ EFI_CALLER_ID_GUID
+ },
+ GPIO_DRIVER_TYPE_SOC_CONTROLLER,
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ sizeof(EFI_DEVICE_PATH_PROTOCOL),
+ 0
+ }
+ }
+};
+
+STATIC
+EFI_STATUS
+MvGpioValidate (
+ IN UINTN ControllerIndex,
+ IN UINTN GpioPin
+ )
+{
+ if (ControllerIndex >= mGpioInstance->Desc->GpioDevCount) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Invalid GPIO ControllerIndex: %d\n",
+ __FUNCTION__,
+ ControllerIndex));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (GpioPin >= mGpioInstance->Desc->SoC[ControllerIndex].GpioPinCount) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: GPIO pin #%d not available in Controller#%d\n",
+ __FUNCTION__,
+ GpioPin,
+ ControllerIndex));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+MvGpioDirectionOutput (
+ IN MARVELL_GPIO_PROTOCOL *This,
+ IN UINTN ControllerIndex,
+ IN UINTN GpioPin,
+ IN BOOLEAN Value
+ )
+{
+ UINTN BaseAddress;
+ EFI_STATUS Status;
+
+ Status = MvGpioValidate (ControllerIndex, GpioPin);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Fail to set output for pin #%d\n",
+ __FUNCTION__,
+ GpioPin));
+ return Status;
+ }
+
+ BaseAddress = mGpioInstance->Desc->SoC[ControllerIndex].GpioBaseAddress;
+
+ MmioAndThenOr32 (BaseAddress + GPIO_DATA_OUT_REG,
+ ~BIT (GpioPin),
+ (Value) << GpioPin);
+
+ MmioAnd32 (BaseAddress + GPIO_OUT_EN_REG, ~BIT (GpioPin));
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+MvGpioDirectionInput (
+ IN MARVELL_GPIO_PROTOCOL *This,
+ IN UINTN ControllerIndex,
+ IN UINTN GpioPin
+ )
+{
+ UINTN BaseAddress;
+ EFI_STATUS Status;
+
+ Status = MvGpioValidate (ControllerIndex, GpioPin);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Fail to set input for pin #%d\n",
+ __FUNCTION__,
+ GpioPin));
+ return Status;
+ }
+
+ BaseAddress = mGpioInstance->Desc->SoC[ControllerIndex].GpioBaseAddress;
+
+ MmioOr32 (BaseAddress + GPIO_OUT_EN_REG, BIT (GpioPin));
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+MvGpioGetFunction (
+ IN MARVELL_GPIO_PROTOCOL *This,
+ IN UINTN ControllerIndex,
+ IN UINTN GpioPin,
+ OUT MARVELL_GPIO_MODE *Mode
+ )
+{
+ UINT32 RegVal;
+ UINTN BaseAddress;
+ EFI_STATUS Status;
+
+ Status = MvGpioValidate (ControllerIndex, GpioPin);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Fail to get function of pin #%d\n",
+ __FUNCTION__,
+ GpioPin));
+ return Status;
+ }
+
+ BaseAddress = mGpioInstance->Desc->SoC[ControllerIndex].GpioBaseAddress;
+
+ RegVal = MmioRead32 (BaseAddress + GPIO_OUT_EN_REG);
+ *Mode = ((RegVal & BIT (GpioPin)) ? GPIO_MODE_INPUT : GPIO_MODE_OUTPUT);
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+MvGpioGetValue (
+ IN MARVELL_GPIO_PROTOCOL *This,
+ IN UINTN ControllerIndex,
+ IN UINTN GpioPin,
+ IN OUT BOOLEAN *Value
+ )
+{
+ UINTN BaseAddress;
+ EFI_STATUS Status;
+
+ Status = MvGpioValidate (ControllerIndex, GpioPin);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Fail to get value of pin #%d\n",
+ __FUNCTION__,
+ GpioPin));
+ return Status;
+ }
+
+ BaseAddress = mGpioInstance->Desc->SoC[ControllerIndex].GpioBaseAddress;
+
+ *Value = !!(MmioRead32 (BaseAddress + GPIO_DATA_IN_REG) & BIT (GpioPin));
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+MvGpioSetValue (
+ IN MARVELL_GPIO_PROTOCOL *This,
+ IN UINTN ControllerIndex,
+ IN UINTN GpioPin,
+ IN BOOLEAN Value
+ )
+{
+ UINTN BaseAddress;
+ EFI_STATUS Status;
+
+ Status = MvGpioValidate (ControllerIndex, GpioPin);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Fail to get value of pin #%d\n",
+ __FUNCTION__,
+ GpioPin));
+ return Status;
+ }
+
+ BaseAddress = mGpioInstance->Desc->SoC[ControllerIndex].GpioBaseAddress;
+
+ MmioAndThenOr32 (BaseAddress + GPIO_DATA_OUT_REG,
+ ~BIT (GpioPin),
+ Value << GpioPin);
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+VOID
+MvGpioInitProtocol (
+ IN MARVELL_GPIO_PROTOCOL *GpioProtocol
+ )
+{
+ GpioProtocol->DirectionInput = MvGpioDirectionInput;
+ GpioProtocol->DirectionOutput = MvGpioDirectionOutput;
+ GpioProtocol->GetFunction = MvGpioGetFunction;
+ GpioProtocol->GetValue = MvGpioGetValue;
+ GpioProtocol->SetValue = MvGpioSetValue;
+}
+
+EFI_STATUS
+EFIAPI
+MvGpioEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ MARVELL_BOARD_DESC_PROTOCOL *BoardDescProtocol;
+ MV_GPIO_DEVICE_PATH *GpioDevicePath;
+ MV_BOARD_GPIO_DESC *Desc;
+ EFI_STATUS Status;
+
+ GpioDevicePath = AllocateCopyPool (sizeof (MV_GPIO_DEVICE_PATH),
+ &mGpioDevicePathTemplate);
+ if (GpioDevicePath == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ mGpioInstance = AllocateZeroPool (sizeof (MV_GPIO));
+ if (mGpioInstance == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ErrGpioInstanceAlloc;
+ }
+
+ /* Obtain list of available controllers */
+ Status = gBS->LocateProtocol (&gMarvellBoardDescProtocolGuid,
+ NULL,
+ (VOID **)&BoardDescProtocol);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Cannot locate BoardDesc protocol\n",
+ __FUNCTION__));
+ goto ErrLocateBoardDesc;
+ }
+
+ Status = BoardDescProtocol->BoardDescGpioGet (BoardDescProtocol, &Desc);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Cannot get GPIO board desc from BoardDesc protocol\n",
+ __FUNCTION__));
+ goto ErrLocateBoardDesc;
+ }
+
+ mGpioInstance->Signature = GPIO_SIGNATURE;
+ mGpioInstance->Desc = Desc;
+
+ MvGpioInitProtocol (&mGpioInstance->GpioProtocol);
+
+ Status = gBS->InstallMultipleProtocolInterfaces (&(mGpioInstance->Handle),
+ &gMarvellGpioProtocolGuid,
+ &(mGpioInstance->GpioProtocol),
+ &gEfiDevicePathProtocolGuid,
+ (EFI_DEVICE_PATH_PROTOCOL *)GpioDevicePath,
+ NULL);
+ if (EFI_ERROR (Status)) {
+ goto ErrLocateBoardDesc;
+ }
+
+ return EFI_SUCCESS;
+
+ErrLocateBoardDesc:
+ gBS->FreePool (mGpioInstance);
+
+ErrGpioInstanceAlloc:
+ gBS->FreePool (GpioDevicePath);
+
+ return Status;
+}
--
2.7.4
next prev parent reply other threads:[~2018-10-20 1:58 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-20 1:57 [platforms: PATCH 00/12] Armada7k8k GPIO support Marcin Wojtas
2018-10-20 1:57 ` [platforms: PATCH 01/12] Marvell/Library: ArmadaSoCDescLib: Add GPIO information Marcin Wojtas
2018-11-14 1:10 ` Leif Lindholm
2018-11-14 6:05 ` Marcin Wojtas
2018-11-14 17:33 ` Leif Lindholm
2018-11-21 1:26 ` Marcin Wojtas
2018-11-26 14:49 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 02/12] Marvell/Library: ArmadaBoardDescLib: " Marcin Wojtas
2018-11-14 1:12 ` Leif Lindholm
2018-11-14 6:16 ` Marcin Wojtas
2018-11-14 17:29 ` Leif Lindholm
2018-12-04 15:18 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 03/12] SolidRun/Armada80x0McBin: Introduce board description library Marcin Wojtas
2018-12-04 15:23 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 04/12] Marvell/Armada70x0Db: " Marcin Wojtas
2018-12-04 15:27 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 05/12] Marvell/Armada80x0Db: " Marcin Wojtas
2018-12-04 15:31 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 06/12] Marvell/Drivers: MvBoardDesc: Extend protocol with GPIO support Marcin Wojtas
2018-12-04 15:42 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 07/12] Marvell/Protocol: Introduce MARVELL_GPIO_PROTOCOL Marcin Wojtas
2018-12-04 16:00 ` Leif Lindholm
2018-10-20 1:57 ` Marcin Wojtas [this message]
2018-12-04 16:37 ` [platforms: PATCH 08/12] Marvell/Drivers: MvGpioDxe: Introduce platform GPIO driver Leif Lindholm
2018-12-04 16:40 ` Ard Biesheuvel
2018-12-04 17:19 ` Leif Lindholm
2018-12-04 17:20 ` Ard Biesheuvel
2018-10-20 1:57 ` [platforms: PATCH 09/12] Marvell/Drivers: I2c: Use common header for macros Marcin Wojtas
2018-12-04 16:38 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 10/12] Marvell/Drivers: MvPca95xxDxe: Introduce I2C GPIO driver Marcin Wojtas
2018-12-04 17:02 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 11/12] Marvell/Armada7k8k: Enable GPIO drivers compilation Marcin Wojtas
2018-12-04 17:06 ` Leif Lindholm
2018-10-20 1:57 ` [platforms: PATCH 12/12] Marvell/Armada7k8k: Introduce NonDiscoverable device init routines Marcin Wojtas
2018-12-04 17:16 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1540000661-1956-9-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox