From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=92.121.34.13; helo=inva020.nxp.com; envelope-from=meenakshi.aggarwal@nxp.com; receiver=edk2-devel@lists.01.org Received: from inva020.nxp.com (inva020.nxp.com [92.121.34.13]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id 803F52119620A for ; Wed, 28 Nov 2018 01:15:55 -0800 (PST) Received: from inva020.nxp.com (localhost [127.0.0.1]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 43BB21A030B; Wed, 28 Nov 2018 10:15:54 +0100 (CET) Received: from inv0113.in-blr01.nxp.com (inv0113.in-blr01.nxp.com [165.114.116.118]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 9C5F61A0309; Wed, 28 Nov 2018 10:15:53 +0100 (CET) Received: from uefi-OptiPlex-790.ap.freescale.net (uefi-OptiPlex-790.ap.freescale.net [10.232.132.78]) by inv0113.in-blr01.nxp.com (Postfix) with ESMTP id B332635F; Wed, 28 Nov 2018 14:45:52 +0530 (IST) From: Meenakshi Aggarwal To: ard.biesheuvel@linaro.org, leif.lindholm@linaro.org, michael.d.kinney@intel.com, edk2-devel@lists.01.org Date: Wed, 28 Nov 2018 20:31:16 +0530 Message-Id: <1543417315-5763-3-git-send-email-meenakshi.aggarwal@nxp.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1543417315-5763-1-git-send-email-meenakshi.aggarwal@nxp.com> References: <1518771035-6733-1-git-send-email-meenakshi.aggarwal@nxp.com> <1543417315-5763-1-git-send-email-meenakshi.aggarwal@nxp.com> X-Virus-Scanned: ClamAV using ClamSMTP Subject: [PATCH edk2-platforms 02/41] Silicon/NXP : Add support for Watchdog driver X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 28 Nov 2018 09:15:56 -0000 Installs watchdog timer arch protocol Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Meenakshi Aggarwal --- Silicon/NXP/Drivers/WatchDog/WatchDog.c | 402 +++++++++++++++++++++++++++ Silicon/NXP/Drivers/WatchDog/WatchDog.h | 39 +++ Silicon/NXP/Drivers/WatchDog/WatchDogDxe.inf | 47 ++++ 3 files changed, 488 insertions(+) create mode 100644 Silicon/NXP/Drivers/WatchDog/WatchDog.c create mode 100644 Silicon/NXP/Drivers/WatchDog/WatchDog.h create mode 100644 Silicon/NXP/Drivers/WatchDog/WatchDogDxe.inf diff --git a/Silicon/NXP/Drivers/WatchDog/WatchDog.c b/Silicon/NXP/Drivers/WatchDog/WatchDog.c new file mode 100644 index 0000000..1b1a3b5 --- /dev/null +++ b/Silicon/NXP/Drivers/WatchDog/WatchDog.c @@ -0,0 +1,402 @@ +/** WatchDog.c +* +* Based on Watchdog driver implemenation available in +* ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805Watchdog.c +* +* Copyright 2017 NXP +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#include +#include +#include +#include +#include +#include +#include + +#include "WatchDog.h" + +STATIC EFI_EVENT EfiExitBootServicesEvent; +STATIC EFI_EVENT WdogFeedEvent; +STATIC MMIO_OPERATIONS_16 *mMmioOps; + + +STATIC +VOID +WdogPing ( + VOID + ) +{ + // + // To reload a timeout value to the counter the proper service sequence begins by + // writing 0x_5555 followed by 0x_AAAA to the Watchdog Service Register (WDOG_WSR). + // This service sequence will reload the counter with the timeout value WT[7:0] of + // Watchdog Control Register (WDOG_WCR). + // + + mMmioOps->Write (PcdGet64 (PcdWdog1BaseAddr) + WDOG_WSR_OFFSET, + WDOG_SERVICE_SEQ1); + mMmioOps->Write (PcdGet64 (PcdWdog1BaseAddr) + WDOG_WSR_OFFSET, + WDOG_SERVICE_SEQ2); +} + +/** + Stop the Wdog watchdog timer from counting down. +**/ +STATIC +VOID +WdogStop ( + VOID + ) +{ + // Watchdog cannot be disabled by software once started. + // At best, we can keep reload counter with maximum value + + mMmioOps->AndThenOr (PcdGet64 (PcdWdog1BaseAddr) + WDOG_WCR_OFFSET, + (UINT16)(~WDOG_WCR_WT), + (WD_COUNT (WT_MAX_TIME) & WD_COUNT_MASK)); + WdogPing (); +} + +/** + Starts the Wdog counting down by feeding Service register with + desired pattern. + The count down will start from the value stored in the Load register, + not from the value where it was previously stopped. +**/ +STATIC +VOID +WdogStart ( + VOID + ) +{ + //Reload the timeout value + WdogPing (); +} + +/** + On exiting boot services we must make sure the Wdog Watchdog Timer + is stopped. +**/ +STATIC +VOID +EFIAPI +ExitBootServicesEvent ( + IN EFI_EVENT Event, + IN VOID *Context + ) +{ + WdogStop (); +} + +/** + This function registers the handler NotifyFunction so it is called every time + the watchdog timer expires. It also passes the amount of time since the last + handler call to the NotifyFunction. + If NotifyFunction is not NULL and a handler is not already registered, + then the new handler is registered and EFI_SUCCESS is returned. + If NotifyFunction is NULL, and a handler is already registered, + then that handler is unregistered. + If an attempt is made to register a handler when a handler is already registered, + then EFI_ALREADY_STARTED is returned. + If an attempt is made to unregister a handler when a handler is not registered, + then EFI_INVALID_PARAMETER is returned. + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + @param NotifyFunction The function to call when a timer interrupt fires. This + function executes at TPL_HIGH_LEVEL. The DXE Core will + register a handler for the timer interrupt, so it can know + how much time has passed. This information is used to + signal timer based events. NULL will unregister the handler. + + @retval EFI_SUCCESS The watchdog timer handler was registered. + @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already + registered. + @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not + previously registered. + +**/ +STATIC +EFI_STATUS +EFIAPI +WdogRegisterHandler ( + IN EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *This, + IN EFI_WATCHDOG_TIMER_NOTIFY NotifyFunction + ) +{ + // ERROR: This function is not supported. + // The hardware watchdog will reset the board + return EFI_INVALID_PARAMETER; +} + +/** + + This function adjusts the period of timer interrupts to the value specified + by TimerPeriod. If the timer period is updated, then the selected timer + period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If + the timer hardware is not programmable, then EFI_UNSUPPORTED is returned. + If an error occurs while attempting to update the timer period, then the + timer hardware will be put back in its state prior to this call, and + EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt + is disabled. This is not the same as disabling the CPU's interrupts. + Instead, it must either turn off the timer hardware, or it must adjust the + interrupt controller so that a CPU interrupt is not generated when the timer + interrupt fires. + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If + the timer hardware is not programmable, then EFI_UNSUPPORTED is + returned. If the timer is programmable, then the timer period + will be rounded up to the nearest timer period that is supported + by the timer hardware. If TimerPeriod is set to 0, then the + timer interrupts will be disabled. + + + @retval EFI_SUCCESS The timer period was changed. + @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt. + @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error. + +**/ +STATIC +EFI_STATUS +EFIAPI +WdogSetTimerPeriod ( + IN EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *This, + IN UINT64 TimerPeriod // In 100ns units + ) +{ + EFI_STATUS Status; + UINT64 TimerPeriodInSec; + UINT16 Val; + + Status = EFI_SUCCESS; + + if (TimerPeriod == 0) { + // This is a watchdog stop request + WdogStop (); + return Status; + } else { + // Convert the TimerPeriod (in 100 ns unit) to an equivalent second value + + TimerPeriodInSec = DivU64x32 (TimerPeriod, NANO_SECOND_BASE); + + // The registers in the Wdog are only 32 bits + if (TimerPeriodInSec > WT_MAX_TIME) { + // We could load the watchdog with the maximum supported value but + // if a smaller value was requested, this could have the watchdog + // triggering before it was intended. + // Better generate an error to let the caller know. + Status = EFI_DEVICE_ERROR; + return Status; + } + + // set the new timeout value in the WCR + // Convert the timeout value from Seconds to timer count + Val = ((WD_COUNT(TimerPeriodInSec) & WD_COUNT_MASK) << 8); + + mMmioOps->AndThenOr (PcdGet64 (PcdWdog1BaseAddr) + WDOG_WCR_OFFSET, + (UINT16)(~WDOG_WCR_WT), + Val); + // Start the watchdog + WdogStart (); + } + + return Status; +} + +/** + This function retrieves the period of timer interrupts in 100 ns units, + returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod + is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is + returned, then the timer is currently disabled. + + @param This The EFI_TIMER_ARCH_PROTOCOL instance. + @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If + 0 is returned, then the timer is currently disabled. + + + @retval EFI_SUCCESS The timer period was returned in TimerPeriod. + @retval EFI_INVALID_PARAMETER TimerPeriod is NULL. + +**/ +STATIC +EFI_STATUS +EFIAPI +WdogGetTimerPeriod ( + IN EFI_WATCHDOG_TIMER_ARCH_PROTOCOL *This, + OUT UINT64 *TimerPeriod + ) +{ + EFI_STATUS Status; + UINT64 ReturnValue; + UINT16 Val; + + Status = EFI_SUCCESS; + + if (TimerPeriod == NULL) { + return EFI_INVALID_PARAMETER; + } + + // Check if the watchdog is stopped + if ((mMmioOps->Read (PcdGet64 (PcdWdog1BaseAddr) + WDOG_WCR_OFFSET) + & WDOG_WCR_WDE) == 0 ) { + // It is stopped, so return zero. + ReturnValue = 0; + } else { + // Convert the Watchdog ticks into equivalent TimerPeriod second value. + Val = (mMmioOps->Read (PcdGet64 (PcdWdog1BaseAddr) + WDOG_WCR_OFFSET) + & WDOG_WCR_WT ) >> 8; + ReturnValue = WD_SEC(Val); + } + + *TimerPeriod = ReturnValue; + return Status; +} + +/** + Interface structure for the Watchdog Architectural Protocol. + + @par Protocol Description: + This protocol provides a service to set the amount of time to wait + before firing the watchdog timer, and it also provides a service to + register a handler that is invoked when the watchdog timer fires. + + @par When the watchdog timer fires, control will be passed to a handler + if one has been registered. If no handler has been registered, + or the registered handler returns, then the system will be + reset by calling the Runtime Service ResetSystem(). + + @param RegisterHandler + Registers a handler that will be called each time the + watchdogtimer interrupt fires. TimerPeriod defines the minimum + time between timer interrupts, so TimerPeriod will also + be the minimum time between calls to the registered + handler. + NOTE: If the watchdog resets the system in hardware, then + this function will not have any chance of executing. + + @param SetTimerPeriod + Sets the period of the timer interrupt in 100 nS units. + This function is optional, and may return EFI_UNSUPPORTED. + If this function is supported, then the timer period will + be rounded up to the nearest supported timer period. + + @param GetTimerPeriod + Retrieves the period of the timer interrupt in 100 nS units. + +**/ +STATIC +EFI_WATCHDOG_TIMER_ARCH_PROTOCOL gWatchdogTimer = { + WdogRegisterHandler, + WdogSetTimerPeriod, + WdogGetTimerPeriod +}; + +/** + Call back function when the timer event is signaled. + This function will feed the watchdog with maximum value + so that system wont reset in idle case e.g. stopped on UEFI shell. + + @param[in] Event The Event this notify function registered to. + @param[in] Context Pointer to the context data registered to the + Event. + +**/ +VOID +EFIAPI +WdogFeed ( + IN EFI_EVENT Event, + IN VOID* Context + ) +{ + WdogPing(); +} +/** + Initialize state information for the Watchdog Timer Architectural Protocol. + + @param ImageHandle of the loaded driver + @param SystemTable Pointer to the System Table + + @retval EFI_SUCCESS Protocol registered + @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure + @retval EFI_DEVICE_ERROR Hardware problems + +**/ +EFI_STATUS +EFIAPI +WdogInitialize ( + IN EFI_HANDLE ImageHandle, + IN EFI_SYSTEM_TABLE *SystemTable + ) +{ + EFI_STATUS Status; + EFI_HANDLE Handle; + + mMmioOps = GetMmioOperations16 (FixedPcdGetBool (PcdWdogBigEndian)); + + mMmioOps->AndThenOr (PcdGet64 (PcdWdog1BaseAddr) + WDOG_WCR_OFFSET, + (UINT16)(~WDOG_WCR_WT), + (WD_COUNT (WT_MAX_TIME) & WD_COUNT_MASK)); + + mMmioOps->Or (PcdGet64 (PcdWdog1BaseAddr) + WDOG_WCR_OFFSET, WDOG_WCR_WDE); + + // + // Make sure the Watchdog Timer Architectural Protocol + // has not been installed in the system yet. + // This will avoid conflicts with the universal watchdog + // + ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiWatchdogTimerArchProtocolGuid); + + // Register for an ExitBootServicesEvent + Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY, + ExitBootServicesEvent, NULL, &EfiExitBootServicesEvent); + if (EFI_ERROR (Status)) { + Status = EFI_OUT_OF_RESOURCES; + return Status; + } + + // + // Start the timer to feed Watchdog with maximum timeout value. + // + Status = gBS->CreateEvent ( + EVT_TIMER | EVT_NOTIFY_SIGNAL, + TPL_NOTIFY, + WdogFeed, + NULL, + &WdogFeedEvent + ); + if (EFI_ERROR (Status)) { + return Status; + } + + Status = gBS->SetTimer (WdogFeedEvent, TimerPeriodic, WT_FEED_INTERVAL); + if (EFI_ERROR (Status)) { + return Status; + } + + // Install the Timer Architectural Protocol onto a new handle + Handle = NULL; + Status = gBS->InstallMultipleProtocolInterfaces ( + &Handle, + &gEfiWatchdogTimerArchProtocolGuid, &gWatchdogTimer, + NULL + ); + if (EFI_ERROR (Status)) { + gBS->CloseEvent (EfiExitBootServicesEvent); + Status = EFI_OUT_OF_RESOURCES; + return Status; + } + + WdogPing (); + + return Status; +} diff --git a/Silicon/NXP/Drivers/WatchDog/WatchDog.h b/Silicon/NXP/Drivers/WatchDog/WatchDog.h new file mode 100644 index 0000000..9542608 --- /dev/null +++ b/Silicon/NXP/Drivers/WatchDog/WatchDog.h @@ -0,0 +1,39 @@ +/** WatchDog.h +* +* Copyright 2017 NXP +* +* This program and the accompanying materials +* are licensed and made available under the terms and conditions of the BSD License +* which accompanies this distribution. The full text of the license may be found at +* http://opensource.org/licenses/bsd-license.php +* +* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +* +**/ + +#ifndef __WATCHDOG_H__ +#define __WATCHDOG_H__ + +#define WDOG_SIZE 0x1000 +#define WDOG_WCR_OFFSET 0 +#define WDOG_WSR_OFFSET 2 +#define WDOG_WRSR_OFFSET 4 +#define WDOG_WICR_OFFSET 6 +#define WDOG_WCR_WT (0xFF << 8) +#define WDOG_WCR_WDE (1 << 2) +#define WDOG_SERVICE_SEQ1 0x5555 +#define WDOG_SERVICE_SEQ2 0xAAAA +#define WDOG_WCR_WDZST 0x1 +#define WDOG_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */ + +#define WT_MAX_TIME 128 +#define WD_COUNT(Sec) (((Sec) * 2 - 1) << 8) +#define WD_COUNT_MASK 0xff00 +#define WD_SEC(Cnt) (((Cnt) + 1) / 2) + +#define NANO_SECOND_BASE 10000000 + +#define WT_FEED_INTERVAL (WT_MAX_TIME * NANO_SECOND_BASE) + +#endif //__WATCHDOG_H__ diff --git a/Silicon/NXP/Drivers/WatchDog/WatchDogDxe.inf b/Silicon/NXP/Drivers/WatchDog/WatchDogDxe.inf new file mode 100644 index 0000000..a311bdc --- /dev/null +++ b/Silicon/NXP/Drivers/WatchDog/WatchDogDxe.inf @@ -0,0 +1,47 @@ +# WatchDog.inf +# +# Component description file for WatchDog module +# +# Copyright 2017 NXP +# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php +# +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# + +[Defines] + INF_VERSION = 0x0001001A + BASE_NAME = WatchDogDxe + FILE_GUID = 0358b544-ec65-4339-89cd-cad60a3dd787 + MODULE_TYPE = DXE_DRIVER + VERSION_STRING = 1.0 + ENTRY_POINT = WdogInitialize + +[Sources.common] + WatchDog.c + +[Packages] + MdePkg/MdePkg.dec + Silicon/NXP/NxpQoriqLs.dec + +[LibraryClasses] + BaseLib + IoAccessLib + PcdLib + UefiBootServicesTableLib + UefiDriverEntryPoint + +[Pcd] + gNxpQoriqLsTokenSpaceGuid.PcdWdog1BaseAddr + gNxpQoriqLsTokenSpaceGuid.PcdWdogBigEndian + +[Protocols] + gEfiWatchdogTimerArchProtocolGuid + +[Depex] + TRUE -- 1.9.1