[PATCH edk2-platforms 38/41] DWC3 : Add DWC3 USB controller initialization driver.

[Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>]

Add support of DWC3 controller driver which
Performs DWC3 controller initialization and
Register itself as NonDiscoverableMmioDevice

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
---
 Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.c   | 218 +++++++++++++++++++++++++++
 Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.h   | 144 ++++++++++++++++++
 Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.inf |  48 ++++++
 Silicon/NXP/NxpQoriqLs.dec                   |   5 +
 4 files changed, 415 insertions(+)
 create mode 100644 Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.c
 create mode 100644 Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.h
 create mode 100644 Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.inf

diff --git a/Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.c b/Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.c
new file mode 100644
index 0000000..0a9c821
--- /dev/null
+++ b/Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.c
@@ -0,0 +1,218 @@
+/** @file
+
+  Copyright 2017 NXP
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include <Library/DebugLib.h>
+#include <Library/IoLib.h>
+#include <Library/NonDiscoverableDeviceRegistrationLib.h>
+
+#include "UsbHcd.h"
+
+STATIC
+VOID
+XhciSetBeatBurstLength (
+  IN  UINTN  UsbReg
+  )
+{
+  DWC3       *Dwc3Reg;
+
+  Dwc3Reg = (VOID *)(UsbReg + DWC3_REG_OFFSET);
+
+  MmioAndThenOr32 ((UINTN)&Dwc3Reg->GSBusCfg0, ~USB3_ENABLE_BEAT_BURST_MASK,
+                                              USB3_ENABLE_BEAT_BURST);
+  MmioOr32 ((UINTN)&Dwc3Reg->GSBusCfg1, USB3_SET_BEAT_BURST_LIMIT);
+
+  return;
+}
+
+STATIC
+VOID
+Dwc3SetFladj (
+  IN  DWC3   *Dwc3Reg,
+  IN  UINT32 Val
+  )
+{
+  MmioOr32 ((UINTN)&Dwc3Reg->GFLAdj, GFLADJ_30MHZ_REG_SEL |
+                        GFLADJ_30MHZ(Val));
+}
+
+VOID
+Dwc3SetMode (
+  IN  DWC3   *Dwc3Reg,
+  IN  UINT32 Mode
+  )
+{
+  MmioAndThenOr32 ((UINTN)&Dwc3Reg->GCtl,
+               ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG)),
+               DWC3_GCTL_PRTCAPDIR(Mode));
+}
+
+STATIC
+VOID
+Dwc3CoreSoftReset (
+  IN  DWC3   *Dwc3Reg
+  )
+{
+  MmioOr32 ((UINTN)&Dwc3Reg->GCtl, DWC3_GCTL_CORESOFTRESET);
+  MmioOr32 ((UINTN)&Dwc3Reg->GUsb3PipeCtl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
+  MmioOr32 ((UINTN)&Dwc3Reg->GUsb2PhyCfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
+  MmioAnd32 ((UINTN)&Dwc3Reg->GUsb3PipeCtl[0], ~DWC3_GUSB3PIPECTL_PHYSOFTRST);
+  MmioAnd32 ((UINTN)&Dwc3Reg->GUsb2PhyCfg, ~DWC3_GUSB2PHYCFG_PHYSOFTRST);
+  MmioAnd32 ((UINTN)&Dwc3Reg->GCtl, ~DWC3_GCTL_CORESOFTRESET);
+
+  return;
+}
+
+STATIC
+EFI_STATUS
+Dwc3CoreInit (
+  IN  DWC3   *Dwc3Reg
+  )
+{
+  UINT32     Revision;
+  UINT32     Reg;
+  UINTN      Dwc3Hwparams1;
+
+  Revision = MmioRead32 ((UINTN)&Dwc3Reg->GSnpsId);
+  //
+  // This should read as 0x5533, ascii of U3(DWC_usb3) followed by revision number
+  //
+  if ((Revision & DWC3_GSNPSID_MASK) != DWC3_SYNOPSYS_ID) {
+    DEBUG ((DEBUG_ERROR,"This is not a DesignWare USB3 DRD Core.\n"));
+    return EFI_NOT_FOUND;
+  }
+
+  Dwc3CoreSoftReset (Dwc3Reg);
+
+  Reg = MmioRead32 ((UINTN)&Dwc3Reg->GCtl);
+  Reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
+  Reg &= ~DWC3_GCTL_DISSCRAMBLE;
+
+  Dwc3Hwparams1 = MmioRead32 ((UINTN)&Dwc3Reg->GHwParams1);
+
+  if (DWC3_GHWPARAMS1_EN_PWROPT(Dwc3Hwparams1) == DWC3_GHWPARAMS1_EN_PWROPT_CLK) {
+    Reg &= ~DWC3_GCTL_DSBLCLKGTNG;
+  } else {
+    DEBUG ((DEBUG_ERROR,"No power optimization available.\n"));
+  }
+
+  if ((Revision & DWC3_RELEASE_MASK) < DWC3_RELEASE_190a) {
+    Reg |= DWC3_GCTL_U2RSTECN;
+  }
+
+  MmioWrite32 ((UINTN)&Dwc3Reg->GCtl, Reg);
+
+  return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
+XhciCoreInit (
+  IN  UINTN  UsbReg
+  )
+{
+  EFI_STATUS Status;
+  DWC3       *Dwc3Reg;
+
+  Dwc3Reg = (VOID *)(UsbReg + DWC3_REG_OFFSET);
+
+  Status = Dwc3CoreInit (Dwc3Reg);
+  if (EFI_ERROR (Status)) {
+    DEBUG ((DEBUG_ERROR, "Dwc3CoreInit Failed for controller 0x%x (0x%x) \n",
+                  UsbReg, Status));
+    return Status;
+  }
+
+  Dwc3SetMode (Dwc3Reg, DWC3_GCTL_PRTCAP_HOST);
+
+  Dwc3SetFladj (Dwc3Reg, GFLADJ_30MHZ_DEFAULT);
+
+  return Status;
+}
+
+STATIC
+EFI_STATUS
+EFIAPI
+InitializeUsbController (
+  IN  UINTN  UsbReg
+  )
+{
+  EFI_STATUS Status;
+
+  Status = XhciCoreInit (UsbReg);
+
+  if (EFI_ERROR (Status)) {
+    return Status;
+  }
+
+  //
+  // Change beat burst and outstanding pipelined transfers requests
+  //
+  XhciSetBeatBurstLength (UsbReg);
+
+  return Status;
+}
+
+/**
+  The Entry Point of module. It follows the standard UEFI driver model.
+
+  @param[in] ImageHandle   The firmware allocated handle for the EFI image.
+  @param[in] SystemTable   A pointer to the EFI System Table.
+
+  @retval EFI_SUCCESS      The entry point is executed successfully.
+  @retval other            Some error occurs when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+InitializeUsbHcd (
+  IN EFI_HANDLE            ImageHandle,
+  IN EFI_SYSTEM_TABLE      *SystemTable
+  )
+{
+  EFI_STATUS               Status;
+  UINT32                   NumUsbController;
+  UINT32                   ControllerAddr;
+
+  Status = EFI_SUCCESS;
+  NumUsbController = PcdGet32 (PcdNumUsbController);
+
+  while (NumUsbController) {
+    NumUsbController--;
+    ControllerAddr = PcdGet32 (PcdUsbBaseAddr) +
+                     (NumUsbController * PcdGet32 (PcdUsbSize));
+
+    Status = InitializeUsbController (ControllerAddr);
+    if (EFI_ERROR (Status)) {
+      DEBUG ((DEBUG_ERROR, "USB Controller initialization Failed for %d (0x%x)\n",
+                            ControllerAddr, Status));
+      continue;
+    }
+
+    Status = RegisterNonDiscoverableMmioDevice (
+               NonDiscoverableDeviceTypeXhci,
+               NonDiscoverableDeviceDmaTypeNonCoherent,
+               NULL,
+               NULL,
+               1,
+               ControllerAddr, PcdGet32 (PcdUsbSize)
+             );
+
+    if (EFI_ERROR (Status)) {
+      DEBUG ((DEBUG_ERROR, "Failed to register USB device (0x%x) with error 0x%x \n",
+                           ControllerAddr, Status));
+    }
+  }
+
+  return Status;
+}
diff --git a/Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.h b/Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.h
new file mode 100644
index 0000000..99d86dc
--- /dev/null
+++ b/Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.h
@@ -0,0 +1,144 @@
+/** @file
+
+  Copyright 2017 NXP
+
+  This program and the accompanying materials
+  are licensed and made available under the terms and conditions of the BSD License
+  which accompanies this distribution.  The full text of the license may be found at
+  http://opensource.org/licenses/bsd-license.php
+
+  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __USB_HCD__
+#define __USB_HCD__
+
+#include <Base.h>
+
+/* Global constants */
+#define DWC3_GSNPSID_MASK                      0xffff0000
+#define DWC3_SYNOPSYS_ID                       0x55330000
+#define DWC3_RELEASE_MASK                      0xffff
+#define DWC3_REG_OFFSET                        0xC100
+#define DWC3_RELEASE_190a                      0x190a
+
+/* Global Configuration Register */
+#define DWC3_GCTL_U2RSTECN                     BIT16
+#define DWC3_GCTL_PRTCAPDIR(N)                 ((N) << 12)
+#define DWC3_GCTL_PRTCAP_HOST                  1
+#define DWC3_GCTL_PRTCAP_OTG                   3
+#define DWC3_GCTL_CORESOFTRESET                BIT11
+#define DWC3_GCTL_SCALEDOWN(N)                 ((N) << 4)
+#define DWC3_GCTL_SCALEDOWN_MASK               DWC3_GCTL_SCALEDOWN(3)
+#define DWC3_GCTL_DISSCRAMBLE                  BIT3
+#define DWC3_GCTL_DSBLCLKGTNG                  BIT0
+
+/* Global HWPARAMS1 Register */
+#define DWC3_GHWPARAMS1_EN_PWROPT(N)           (((N) & (3 << 24)) >> 24)
+#define DWC3_GHWPARAMS1_EN_PWROPT_CLK          1
+
+/* Global USB2 PHY Configuration Register */
+#define DWC3_GUSB2PHYCFG_PHYSOFTRST            BIT31
+
+/* Global USB3 PIPE Control Register */
+#define DWC3_GUSB3PIPECTL_PHYSOFTRST           BIT31
+
+/* Global Frame Length Adjustment Register */
+#define GFLADJ_30MHZ_REG_SEL                   BIT7
+#define GFLADJ_30MHZ(N)                        ((N) & 0x3f)
+#define GFLADJ_30MHZ_DEFAULT                   0x20
+
+/* Default to the FSL XHCI defines */
+#define USB3_ENABLE_BEAT_BURST                 0xF
+#define USB3_ENABLE_BEAT_BURST_MASK            0xFF
+#define USB3_SET_BEAT_BURST_LIMIT              0xF00
+
+typedef struct {
+  UINT32 GEvntAdrLo;
+  UINT32 GEvntAdrHi;
+  UINT32 GEvntSiz;
+  UINT32 GEvntCount;
+} G_EVENT_BUFFER;
+
+typedef struct {
+  UINT32 DDepCmdPar2;
+  UINT32 DDepCmdPar1;
+  UINT32 DDepCmdPar0;
+  UINT32 DDepCmd;
+} D_PHYSICAL_EP;
+
+typedef struct {
+  UINT32 GSBusCfg0;
+  UINT32 GSBusCfg1;
+  UINT32 GTxThrCfg;
+  UINT32 GRxThrCfg;
+  UINT32 GCtl;
+  UINT32 Res1;
+  UINT32 GSts;
+  UINT32 Res2;
+  UINT32 GSnpsId;
+  UINT32 GGpio;
+  UINT32 GUid;
+  UINT32 GUctl;
+  UINT64 GBusErrAddr;
+  UINT64 GPrtbImap;
+  UINT32 GHwParams0;
+  UINT32 GHwParams1;
+  UINT32 GHwParams2;
+  UINT32 GHwParams3;
+  UINT32 GHwParams4;
+  UINT32 GHwParams5;
+  UINT32 GHwParams6;
+  UINT32 GHwParams7;
+  UINT32 GDbgFifoSpace;
+  UINT32 GDbgLtssm;
+  UINT32 GDbgLnmcc;
+  UINT32 GDbgBmu;
+  UINT32 GDbgLspMux;
+  UINT32 GDbgLsp;
+  UINT32 GDbgEpInfo0;
+  UINT32 GDbgEpInfo1;
+  UINT64 GPrtbImapHs;
+  UINT64 GPrtbImapFs;
+  UINT32 Res3[28];
+  UINT32 GUsb2PhyCfg[16];
+  UINT32 GUsb2I2cCtl[16];
+  UINT32 GUsb2PhyAcc[16];
+  UINT32 GUsb3PipeCtl[16];
+  UINT32 GTxFifoSiz[32];
+  UINT32 GRxFifoSiz[32];
+  G_EVENT_BUFFER GEvntBuf[32];
+  UINT32 GHwParams8;
+  UINT32 Res4[11];
+  UINT32 GFLAdj;
+  UINT32 Res5[51];
+  UINT32 DCfg;
+  UINT32 DCtl;
+  UINT32 DEvten;
+  UINT32 DSts;
+  UINT32 DGCmdPar;
+  UINT32 DGCmd;
+  UINT32 Res6[2];
+  UINT32 DAlepena;
+  UINT32 Res7[55];
+  D_PHYSICAL_EP DPhyEpCmd[32];
+  UINT32 Res8[128];
+  UINT32 OCfg;
+  UINT32 OCtl;
+  UINT32 OEvt;
+  UINT32 OEvtEn;
+  UINT32 OSts;
+  UINT32 Res9[3];
+  UINT32 AdpCfg;
+  UINT32 AdpCtl;
+  UINT32 AdpEvt;
+  UINT32 AdpEvten;
+  UINT32 BcCfg;
+  UINT32 Res10;
+  UINT32 BcEvt;
+  UINT32 BcEvten;
+} DWC3;
+
+#endif
diff --git a/Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.inf b/Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.inf
new file mode 100644
index 0000000..ac74bc6
--- /dev/null
+++ b/Silicon/NXP/Drivers/UsbHcdInitDxe/UsbHcd.inf
@@ -0,0 +1,48 @@
+#  UsbHcd.inf
+#
+#  Copyright 2017 NXP
+#
+#  This program and the accompanying materials
+#  are licensed and made available under the terms and conditions of the BSD License
+#  which accompanies this distribution. The full text of the license may be found
+#  http://opensource.org/licenses/bsd-license.php
+#
+#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+[Defines]
+  INF_VERSION                     = 0x0001001a
+  BASE_NAME                       = UsbHcdDxe
+  FILE_GUID                       = 196e7c2a-37b2-4b85-8683-718588952449
+  MODULE_TYPE                     = DXE_DRIVER
+  VERSION_STRING                  = 1.0
+  ENTRY_POINT                     = InitializeUsbHcd
+
+[Sources.common]
+  UsbHcd.c
+
+[Packages]
+  EmbeddedPkg/EmbeddedPkg.dec
+  MdeModulePkg/MdeModulePkg.dec
+  MdePkg/MdePkg.dec
+  Silicon/NXP/NxpQoriqLs.dec
+
+[LibraryClasses]
+  BaseLib
+  BaseMemoryLib
+  DebugLib
+  IoLib
+  MemoryAllocationLib
+  NonDiscoverableDeviceRegistrationLib
+  UefiBootServicesTableLib
+  UefiDriverEntryPoint
+
+[FixedPcd]
+  gNxpQoriqLsTokenSpaceGuid.PcdNumUsbController
+  gNxpQoriqLsTokenSpaceGuid.PcdUsbBaseAddr
+  gNxpQoriqLsTokenSpaceGuid.PcdUsbSize
+
+[Depex]
+  TRUE
diff --git a/Silicon/NXP/NxpQoriqLs.dec b/Silicon/NXP/NxpQoriqLs.dec
index aae0a34..dd2c314 100644
--- a/Silicon/NXP/NxpQoriqLs.dec
+++ b/Silicon/NXP/NxpQoriqLs.dec
@@ -82,6 +82,11 @@
   gNxpQoriqLsTokenSpaceGuid.PcdRomSize|0x0|UINT64|0x0000012D
 
   #
+  # USB PCDs
+  #
+  gNxpQoriqLsTokenSpaceGuid.PcdNumUsbController|0|UINT32|0x00000170
+
+  #
   # PCI PCDs
   #
   gNxpQoriqLsTokenSpaceGuid.PcdPcieLutBase|0x0|UINT32|0x000001D0
-- 
1.9.1