From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, mw@semihalf.com, jsd@semihalf.com,
jaz@semihalf.com, kostap@marvell.com
Subject: [platforms: PATCH v2 06/12] Marvell/Drivers: MvBoardDesc: Extend protocol with GPIO support
Date: Thu, 10 Jan 2019 02:44:33 +0100 [thread overview]
Message-ID: <1547084679-29597-7-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1547084679-29597-1-git-send-email-mw@semihalf.com>
Introduce new callback that can provide information
about GPIO SoC controllers, as well as on-board
I2C IO expanders. According ArmadaSoCDescLib
ArmadaBoardDescLib routines are used for
obtaining required data.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Include/Protocol/BoardDesc.h | 8 ++++
Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c | 43 ++++++++++++++++++++
2 files changed, 51 insertions(+)
diff --git a/Silicon/Marvell/Include/Protocol/BoardDesc.h b/Silicon/Marvell/Include/Protocol/BoardDesc.h
index 1d57a16..02905ea 100644
--- a/Silicon/Marvell/Include/Protocol/BoardDesc.h
+++ b/Silicon/Marvell/Include/Protocol/BoardDesc.h
@@ -50,6 +50,13 @@ EFI_STATUS
typedef
EFI_STATUS
+(EFIAPI *MV_BOARD_GPIO_DESCRIPTION_GET) (
+ IN MARVELL_BOARD_DESC_PROTOCOL *This,
+ IN OUT MV_BOARD_GPIO_DESCRIPTION **GpioDescription
+ );
+
+typedef
+EFI_STATUS
(EFIAPI *MV_BOARD_DESC_I2C_GET) (
IN MARVELL_BOARD_DESC_PROTOCOL *This,
IN OUT MV_BOARD_I2C_DESC **I2cDesc
@@ -113,6 +120,7 @@ struct _MARVELL_BOARD_DESC_PROTOCOL {
MV_BOARD_DESC_UTMI_GET BoardDescUtmiGet;
MV_BOARD_DESC_XHCI_GET BoardDescXhciGet;
MV_BOARD_DESC_FREE BoardDescFree;
+ MV_BOARD_GPIO_DESCRIPTION_GET GpioDescriptionGet;
};
#endif // __MARVELL_BOARD_DESC_PROTOCOL_H__
diff --git a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c
index f71bfc4..e348b85 100644
--- a/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c
+++ b/Silicon/Marvell/Drivers/BoardDesc/MvBoardDescDxe.c
@@ -100,6 +100,48 @@ MvBoardDescComPhyGet (
STATIC
EFI_STATUS
+MvBoardGpioDescriptionGet (
+ IN MARVELL_BOARD_DESC_PROTOCOL *This,
+ IN OUT MV_BOARD_GPIO_DESCRIPTION **GpioDescription
+ )
+{
+ MV_BOARD_GPIO_DESCRIPTION *Description;
+ UINTN SoCGpioCount, GpioExpanderCount;
+ MV_GPIO_EXPANDER *GpioExpanders;
+ GPIO_CONTROLLER *SoCGpio;
+ EFI_STATUS Status;
+
+ /* Get SoC data about all available GPIO controllers */
+ Status = ArmadaSoCGpioGet (&SoCGpio, &SoCGpioCount);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ /* Get per-board information about all available I2C IO expanders */
+ Status = ArmadaBoardGpioExpanderGet (&GpioExpanders, &GpioExpanderCount);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ /* Allocate and fill board description */
+ Description = AllocateZeroPool (sizeof (MV_BOARD_GPIO_DESCRIPTION));
+ if (Description == NULL) {
+ DEBUG ((DEBUG_ERROR, "%a: Cannot allocate memory\n", __FUNCTION__));
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Description->SoCGpio = SoCGpio;
+ Description->GpioDeviceCount = SoCGpioCount;
+ Description->GpioExpanders = GpioExpanders;
+ Description->GpioExpanderCount = GpioExpanderCount;
+
+ *GpioDescription = Description;
+
+ return EFI_SUCCESS;
+}
+
+STATIC
+EFI_STATUS
MvBoardDescI2cGet (
IN MARVELL_BOARD_DESC_PROTOCOL *This,
IN OUT MV_BOARD_I2C_DESC **I2cDesc
@@ -571,6 +613,7 @@ MvBoardDescInitProtocol (
BoardDescProtocol->BoardDescUtmiGet = MvBoardDescUtmiGet;
BoardDescProtocol->BoardDescXhciGet = MvBoardDescXhciGet;
BoardDescProtocol->BoardDescFree = MvBoardDescFree;
+ BoardDescProtocol->GpioDescriptionGet = MvBoardGpioDescriptionGet;
return EFI_SUCCESS;
}
--
2.7.4
next prev parent reply other threads:[~2019-01-10 1:45 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-10 1:44 [platforms: PATCH v2 00/12] Armada 7k8k GPIO support Marcin Wojtas
2019-01-10 1:44 ` [platforms: PATCH v2 01/12] Marvell/Library: ArmadaSoCDescLib: Add GPIO information Marcin Wojtas
2019-01-14 23:45 ` Leif Lindholm
2019-01-10 1:44 ` [platforms: PATCH v2 02/12] Marvell/Library: ArmadaBoardDescLib: " Marcin Wojtas
2019-01-14 23:46 ` Leif Lindholm
2019-01-10 1:44 ` [platforms: PATCH v2 03/12] SolidRun/Armada80x0McBin: Extend board description library with GPIO Marcin Wojtas
2019-01-14 23:46 ` Leif Lindholm
2019-01-10 1:44 ` [platforms: PATCH v2 04/12] Marvell/Armada70x0Db: " Marcin Wojtas
2019-01-14 22:41 ` Leif Lindholm
2019-01-15 5:48 ` Marcin Wojtas
2019-01-10 1:44 ` [platforms: PATCH v2 05/12] Marvell/Armada80x0Db: " Marcin Wojtas
2019-01-14 22:44 ` Leif Lindholm
2019-01-10 1:44 ` Marcin Wojtas [this message]
2019-01-14 22:58 ` [platforms: PATCH v2 06/12] Marvell/Drivers: MvBoardDesc: Extend protocol with GPIO support Leif Lindholm
2019-01-15 6:05 ` Marcin Wojtas
2019-01-15 9:56 ` Leif Lindholm
2019-01-15 10:05 ` Marcin Wojtas
2019-01-15 10:12 ` Leif Lindholm
2019-01-15 10:14 ` Marcin Wojtas
2019-01-15 10:26 ` Leif Lindholm
2019-01-10 1:44 ` [platforms: PATCH v2 07/12] Marvell/Protocol: Introduce GPIO helper header Marcin Wojtas
2019-01-14 23:12 ` Leif Lindholm
2019-01-15 6:12 ` Marcin Wojtas
2019-01-10 1:44 ` [platforms: PATCH v2 08/12] Marvell/Drivers: MvGpioDxe: Introduce platform GPIO driver Marcin Wojtas
2019-01-14 23:32 ` Leif Lindholm
2019-01-15 6:19 ` Marcin Wojtas
2019-01-15 10:04 ` Leif Lindholm
2019-01-15 10:06 ` Marcin Wojtas
2019-01-10 1:44 ` [platforms: PATCH v2 09/12] Marvell/Drivers: I2c: Use common header for macros Marcin Wojtas
2019-01-10 1:44 ` [platforms: PATCH v2 10/12] Marvell/Drivers: MvPca95xxDxe: Introduce GPIO expander driver Marcin Wojtas
2019-01-14 23:40 ` Leif Lindholm
2019-01-10 1:44 ` [platforms: PATCH v2 11/12] Marvell/Armada7k8k: Enable GPIO drivers compilation Marcin Wojtas
2019-01-10 1:44 ` [platforms: PATCH v2 12/12] Marvell/Armada7k8k: Introduce NonDiscoverable device init routines Marcin Wojtas
2019-01-14 23:44 ` Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1547084679-29597-7-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox