From: Star Zeng <star.zeng@intel.com>
To: edk2-devel@lists.01.org
Cc: Star Zeng <star.zeng@intel.com>,
Jian J Wang <jian.j.wang@intel.com>, Hao Wu <hao.a.wu@intel.com>
Subject: [PATCH 03/12] MdeModulePkg Variable: Not get NV PCD in VariableWriteServiceInitialize
Date: Sun, 13 Jan 2019 23:37:46 +0800 [thread overview]
Message-ID: <1547393875-37188-4-git-send-email-star.zeng@intel.com> (raw)
In-Reply-To: <1547393875-37188-1-git-send-email-star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1323
Merge EmuVariable and Real variable driver.
Add macro NV_STORAGE_VARIABLE_BASE.
Not get NV PCD in VariableWriteServiceInitialize, but in
FtwNotificationEvent/SmmFtwNotificationEvent, then
VariableWriteServiceInitialize could be not aware the NV
storage is real or emulated.
This patch prepares for adding emulated variable NV mode
support in VariableRuntimeDxe.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
---
.../Universal/Variable/RuntimeDxe/Variable.c | 20 ++------------------
.../Universal/Variable/RuntimeDxe/Variable.h | 9 +++++++--
.../Universal/Variable/RuntimeDxe/VariableDxe.c | 12 ++++++++----
.../Universal/Variable/RuntimeDxe/VariableSmm.c | 16 +++++++++++-----
4 files changed, 28 insertions(+), 29 deletions(-)
diff --git a/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c b/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c
index 0b675c8f36df..424f92a53757 100644
--- a/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c
+++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c
@@ -3770,10 +3770,7 @@ InitRealNonVolatileVariableStore (
return EFI_OUT_OF_RESOURCES;
}
- NvStorageBase = (EFI_PHYSICAL_ADDRESS) PcdGet64 (PcdFlashNvStorageVariableBase64);
- if (NvStorageBase == 0) {
- NvStorageBase = (EFI_PHYSICAL_ADDRESS) PcdGet32 (PcdFlashNvStorageVariableBase);
- }
+ NvStorageBase = NV_STORAGE_VARIABLE_BASE;
ASSERT (NvStorageBase != 0);
//
@@ -4027,7 +4024,7 @@ FlushHobVariableToFlash (
}
/**
- Initializes variable write service after FTW was ready.
+ Initializes variable write service.
@retval EFI_SUCCESS Function successfully executed.
@retval Others Fail to initialize the variable service.
@@ -4041,23 +4038,10 @@ VariableWriteServiceInitialize (
EFI_STATUS Status;
UINTN Index;
UINT8 Data;
- EFI_PHYSICAL_ADDRESS VariableStoreBase;
- EFI_PHYSICAL_ADDRESS NvStorageBase;
VARIABLE_ENTRY_PROPERTY *VariableEntry;
AcquireLockOnlyAtBootTime(&mVariableModuleGlobal->VariableGlobal.VariableServicesLock);
- NvStorageBase = (EFI_PHYSICAL_ADDRESS) PcdGet64 (PcdFlashNvStorageVariableBase64);
- if (NvStorageBase == 0) {
- NvStorageBase = (EFI_PHYSICAL_ADDRESS) PcdGet32 (PcdFlashNvStorageVariableBase);
- }
- VariableStoreBase = NvStorageBase + (mNvFvHeaderCache->HeaderLength);
-
- //
- // Let NonVolatileVariableBase point to flash variable store base directly after FTW ready.
- //
- mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase = VariableStoreBase;
-
//
// Check if the free area is really free.
//
diff --git a/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h b/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h
index 938eb5de61fa..566e7268d187 100644
--- a/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h
+++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.h
@@ -2,7 +2,7 @@
The internal header file includes the common header files, defines
internal structure and functions used by Variable modules.
-Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -46,6 +46,11 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#include "PrivilegePolymorphic.h"
+#define NV_STORAGE_VARIABLE_BASE (EFI_PHYSICAL_ADDRESS) \
+ (PcdGet64 (PcdFlashNvStorageVariableBase64) != 0 ? \
+ PcdGet64 (PcdFlashNvStorageVariableBase64) : \
+ PcdGet32 (PcdFlashNvStorageVariableBase))
+
#define EFI_VARIABLE_ATTRIBUTES_MASK (EFI_VARIABLE_NON_VOLATILE | \
EFI_VARIABLE_BOOTSERVICE_ACCESS | \
EFI_VARIABLE_RUNTIME_ACCESS | \
@@ -473,7 +478,7 @@ GetMaxVariableSize (
);
/**
- Initializes variable write service after FVB was ready.
+ Initializes variable write service.
@retval EFI_SUCCESS Function successfully executed.
@retval Others Fail to initialize the variable service.
diff --git a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c
index f7185df3a7eb..baba6729c1c2 100644
--- a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c
+++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableDxe.c
@@ -386,13 +386,17 @@ FtwNotificationEvent (
ASSERT (PcdGet32 (PcdFlashNvStorageVariableSize) <= FtwMaxBlockSize);
}
+ NvStorageVariableBase = NV_STORAGE_VARIABLE_BASE;
+ VariableStoreBase = NvStorageVariableBase + (mNvFvHeaderCache->HeaderLength);
+
+ //
+ // Let NonVolatileVariableBase point to flash variable store base directly after FTW ready.
+ //
+ mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase = VariableStoreBase;
+
//
// Find the proper FVB protocol for variable.
//
- NvStorageVariableBase = (EFI_PHYSICAL_ADDRESS) PcdGet64 (PcdFlashNvStorageVariableBase64);
- if (NvStorageVariableBase == 0) {
- NvStorageVariableBase = (EFI_PHYSICAL_ADDRESS) PcdGet32 (PcdFlashNvStorageVariableBase);
- }
Status = GetFvbInfoByAddress (NvStorageVariableBase, NULL, &FvbProtocol);
if (EFI_ERROR (Status)) {
return ;
diff --git a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c
index 8c53f84ff6e8..018587ed7373 100644
--- a/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c
+++ b/MdeModulePkg/Universal/Variable/RuntimeDxe/VariableSmm.c
@@ -14,7 +14,7 @@
VariableServiceSetVariable(), VariableServiceQueryVariableInfo(), ReclaimForOS(),
SmmVariableGetStatistics() should also do validation based on its own knowledge.
-Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2010 - 2019, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -37,6 +37,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#include <Guid/SmmVariableCommon.h>
#include "Variable.h"
+extern EFI_FIRMWARE_VOLUME_HEADER *mNvFvHeaderCache;
extern VARIABLE_INFO_ENTRY *gVariableInfo;
EFI_HANDLE mSmmVariableHandle = NULL;
EFI_HANDLE mVariableHandle = NULL;
@@ -867,6 +868,7 @@ SmmFtwNotificationEvent (
)
{
EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS VariableStoreBase;
EFI_SMM_FIRMWARE_VOLUME_BLOCK_PROTOCOL *FvbProtocol;
EFI_SMM_FAULT_TOLERANT_WRITE_PROTOCOL *FtwProtocol;
EFI_PHYSICAL_ADDRESS NvStorageVariableBase;
@@ -889,13 +891,17 @@ SmmFtwNotificationEvent (
ASSERT (PcdGet32 (PcdFlashNvStorageVariableSize) <= FtwMaxBlockSize);
}
+ NvStorageVariableBase = NV_STORAGE_VARIABLE_BASE;
+ VariableStoreBase = NvStorageVariableBase + (mNvFvHeaderCache->HeaderLength);
+
+ //
+ // Let NonVolatileVariableBase point to flash variable store base directly after FTW ready.
+ //
+ mVariableModuleGlobal->VariableGlobal.NonVolatileVariableBase = VariableStoreBase;
+
//
// Find the proper FVB protocol for variable.
//
- NvStorageVariableBase = (EFI_PHYSICAL_ADDRESS) PcdGet64 (PcdFlashNvStorageVariableBase64);
- if (NvStorageVariableBase == 0) {
- NvStorageVariableBase = (EFI_PHYSICAL_ADDRESS) PcdGet32 (PcdFlashNvStorageVariableBase);
- }
Status = GetFvbInfoByAddress (NvStorageVariableBase, NULL, &FvbProtocol);
if (EFI_ERROR (Status)) {
return EFI_NOT_FOUND;
--
2.7.0.windows.1
next prev parent reply other threads:[~2019-01-13 15:38 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-13 15:37 [PATCH 00/12] Merge EmuVariable and Real variable driver Star Zeng
2019-01-13 15:37 ` [PATCH 01/12] MdeModulePkg Variable: Add some missing changes for 9b18845 Star Zeng
2019-01-14 10:15 ` Laszlo Ersek
2019-01-14 10:29 ` Zeng, Star
2019-01-13 15:37 ` [PATCH 02/12] MdeModulePkg Variable: Abstract InitRealNonVolatileVariableStore Star Zeng
2019-01-13 15:37 ` Star Zeng [this message]
2019-01-13 15:37 ` [PATCH 04/12] MdeModulePkg Variable: Abstract VariableWriteServiceInitializeDxe/Smm Star Zeng
2019-01-13 15:37 ` [PATCH 05/12] MdeModulePkg: Add PcdEmuVariableNvModeEnable in dsc Star Zeng
2019-01-14 10:22 ` Laszlo Ersek
2019-01-14 10:30 ` Zeng, Star
2019-01-13 15:37 ` [PATCH 06/12] MdeModulePkg Variable: Add emulated variable NV mode support Star Zeng
2019-01-14 10:57 ` Laszlo Ersek
2019-01-14 15:23 ` Zeng, Star
2019-01-13 15:37 ` [PATCH 07/12] MdeModulePkg VariablePei: Don't check BOOT_IN_RECOVERY_MODE Star Zeng
2019-01-13 15:37 ` [PATCH 08/12] ArmVirtXen: Use merged variable driver for emulated NV mode Star Zeng
2019-01-14 11:40 ` Laszlo Ersek
2019-01-14 15:25 ` Zeng, Star
2019-01-13 15:37 ` [PATCH 09/12] BeagleBoardPkg: " Star Zeng
2019-01-13 15:37 ` [PATCH 10/12] QuarkMin: " Star Zeng
2019-01-13 15:37 ` [PATCH 11/12] CorebootPayloadPkg: " Star Zeng
2019-01-13 15:37 ` [PATCH 12/12] MdeModule: Remove EmuVariableRuntimeDxe Star Zeng
2019-01-23 1:03 ` Wang, Jian J
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1547393875-37188-4-git-send-email-star.zeng@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox