From: Marcin Wojtas <mw@semihalf.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, mw@semihalf.com, jsd@semihalf.com,
jaz@semihalf.com, kostap@marvell.com
Subject: [platforms: PATCH v3 08/12] Marvell/Drivers: MvGpioDxe: Introduce platform GPIO driver
Date: Thu, 17 Jan 2019 12:15:11 +0100 [thread overview]
Message-ID: <1547723715-4562-9-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1547723715-4562-1-git-send-email-mw@semihalf.com>
Marvell Armada 7k/8k SoCs comprise integrated GPIO controllers,
one in AP806 and two in each south bridge hardware blocks.
This patch introduces support for them. The new driver implements
a generic EMBEDDED_GPIO protocol.
In order to ease description of used GPIO pins and controllers
of the Armada 7k8k platforms, add a common enum type.
Based on original work of Jing Hua <jinghua@marvell.com>.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf | 44 +++
Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h | 49 +++
Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c | 353 ++++++++++++++++++++
3 files changed, 446 insertions(+)
create mode 100644 Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf
create mode 100644 Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h
create mode 100644 Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c
diff --git a/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf
new file mode 100644
index 0000000..5ff9130
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.inf
@@ -0,0 +1,44 @@
+## @file
+#
+# Copyright (c) 2017, Marvell International Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials are licensed and made available
+# under the terms and conditions of the BSD License which accompanies this
+# distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR
+# IMPLIED.
+#
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = MvGpioDxe
+ FILE_GUID = 706eb761-b3b5-4f41-8558-5fd9217c0079
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = MvGpioEntryPoint
+
+[Sources]
+ MvGpioDxe.c
+ MvGpioDxe.h
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Marvell/Marvell.dec
+
+[LibraryClasses]
+ ArmadaSoCDescLib
+ DebugLib
+ MemoryAllocationLib
+ UefiDriverEntryPoint
+ UefiLib
+
+[Protocols]
+ gEmbeddedGpioProtocolGuid
+ gMarvellBoardDescProtocolGuid
+
+[Depex]
+ TRUE
diff --git a/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h
new file mode 100644
index 0000000..6e56ec1
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.h
@@ -0,0 +1,49 @@
+/**
+*
+* Copyright (c) 2018, Marvell International Ltd. All rights reserved.
+*
+* This program and the accompanying materials are licensed and made available
+* under the terms and conditions of the BSD License which accompanies this
+* distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+#ifndef __MV_GPIO_H__
+#define __MV_GPIO_H__
+
+
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/DevicePathLib.h>
+#include <Library/IoLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/MvGpioLib.h>
+#include <Library/PcdLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+
+#include <Protocol/BoardDesc.h>
+
+#include <Uefi/UefiBaseType.h>
+
+#define MV_GPIO_SIGNATURE SIGNATURE_64 ('M', 'V','_','G', 'P', 'I','O',' ')
+
+// Marvell MV_GPIO Controller Registers
+#define MV_GPIO_DATA_OUT_REG (0x0)
+#define MV_GPIO_OUT_EN_REG (0x4)
+#define MV_GPIO_BLINK_EN_REG (0x8)
+#define MV_GPIO_DATA_IN_POL_REG (0xc)
+#define MV_GPIO_DATA_IN_REG (0x10)
+
+typedef struct {
+ EMBEDDED_GPIO GpioProtocol;
+ GPIO_CONTROLLER *SoCGpio;
+ UINTN GpioDeviceCount;
+ UINTN Signature;
+ EFI_HANDLE Handle;
+} MV_GPIO;
+
+#endif // __MV_GPIO_H__
diff --git a/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c
new file mode 100644
index 0000000..1d37ecc
--- /dev/null
+++ b/Silicon/Marvell/Drivers/Gpio/MvGpioDxe/MvGpioDxe.c
@@ -0,0 +1,353 @@
+/**
+*
+* Copyright (c) 2018, Marvell International Ltd. All rights reserved.
+*
+* This program and the accompanying materials are licensed and made available
+* under the terms and conditions of the BSD License which accompanies this
+* distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include "MvGpioDxe.h"
+
+STATIC MV_GPIO *mGpioInstance;
+
+STATIC MV_GPIO_DEVICE_PATH mDevicePathTemplate = {
+ {
+ {
+ HARDWARE_DEVICE_PATH,
+ HW_VENDOR_DP,
+ {
+ (UINT8) (sizeof (VENDOR_DEVICE_PATH) +
+ sizeof (MV_GPIO_DRIVER_TYPE)),
+ (UINT8) ((sizeof (VENDOR_DEVICE_PATH) +
+ sizeof (MV_GPIO_DRIVER_TYPE)) >> 8),
+ },
+ },
+ EFI_CALLER_ID_GUID
+ },
+ MV_GPIO_DRIVER_TYPE_SOC_CONTROLLER,
+ {
+ END_DEVICE_PATH_TYPE,
+ END_ENTIRE_DEVICE_PATH_SUBTYPE,
+ {
+ sizeof(EFI_DEVICE_PATH_PROTOCOL),
+ 0
+ }
+ }
+};
+
+#if !defined(MDEPKG_NDEBUG)
+/**
+
+Routine Description:
+
+ Verifies if controller index / GPIO pin values
+ are within proper boundaries.
+
+Arguments:
+
+ ControllerIndex - index of controller
+ GpioPin - which pin to read
+
+Returns:
+
+ EFI_SUCCESS - GPIO pin / controller index are proper
+ EFI_INVALID_PARAMETER - GPIO pin / controller index is out of range
+**/
+STATIC
+EFI_STATUS
+MvGpioValidate (
+ IN UINTN ControllerIndex,
+ IN UINTN GpioPin
+ )
+{
+ if (ControllerIndex >= mGpioInstance->GpioDeviceCount) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Invalid GPIO ControllerIndex: %d\n",
+ __FUNCTION__,
+ ControllerIndex));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (GpioPin >= mGpioInstance->SoCGpio[ControllerIndex].InternalGpioCount) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: GPIO pin #%d not available in Controller#%d\n",
+ __FUNCTION__,
+ GpioPin,
+ ControllerIndex));
+ return EFI_INVALID_PARAMETER;
+ }
+
+ return EFI_SUCCESS;
+}
+#endif
+
+/**
+
+Routine Description:
+
+ Gets the mode (function) of a GPIO pin
+
+Arguments:
+
+ This - pointer to protocol
+ Gpio - which pin
+ Mode - pointer to output mode value
+
+Returns:
+
+ EFI_SUCCESS - mode value retrieved
+ EFI_INVALID_PARAMETER - Mode is a null pointer or Gpio pin is out of range
+
+**/
+STATIC
+EFI_STATUS
+MvGpioGetMode (
+ IN EMBEDDED_GPIO *This,
+ IN EMBEDDED_GPIO_PIN Gpio,
+ OUT EMBEDDED_GPIO_MODE *Mode
+ )
+{
+ UINTN ControllerIndex;
+ UINTN BaseAddress;
+ UINTN GpioPin;
+
+ GpioPin = GPIO_PIN (Gpio);
+ ControllerIndex = GPIO_PORT (Gpio);
+
+ ASSERT_EFI_ERROR (MvGpioValidate (ControllerIndex, GpioPin));
+
+ BaseAddress = mGpioInstance->SoCGpio[ControllerIndex].RegisterBase;
+
+ if (MmioRead32 (BaseAddress + MV_GPIO_OUT_EN_REG) & (1 << GpioPin)) {
+ *Mode = GPIO_MODE_INPUT;
+ } else {
+ if (MmioRead32 (BaseAddress + MV_GPIO_DATA_IN_REG) & (1 << GpioPin)) {
+ *Mode = GPIO_MODE_OUTPUT_1;
+ } else {
+ *Mode = GPIO_MODE_OUTPUT_0;
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+
+Routine Description:
+
+ Gets the state of a GPIO pin
+
+Arguments:
+
+ This - pointer to protocol
+ Gpio - which pin to read
+ Value - state of the pin
+
+Returns:
+
+ EFI_SUCCESS - GPIO state returned in Value
+ EFI_INVALID_PARAMETER - Value is NULL pointer or Gpio pin is out of range
+**/
+STATIC
+EFI_STATUS
+MvGpioGet (
+ IN EMBEDDED_GPIO *This,
+ IN EMBEDDED_GPIO_PIN Gpio,
+ OUT UINTN *Value
+ )
+{
+ UINTN ControllerIndex;
+ UINTN BaseAddress;
+ UINTN GpioPin;
+
+ GpioPin = GPIO_PIN (Gpio);
+ ControllerIndex = GPIO_PORT (Gpio);
+
+ ASSERT_EFI_ERROR (MvGpioValidate (ControllerIndex, GpioPin));
+
+ BaseAddress = mGpioInstance->SoCGpio[ControllerIndex].RegisterBase;
+
+ if (MmioRead32 (BaseAddress + MV_GPIO_DATA_IN_REG) & (1 << GpioPin)) {
+ *Value = 1;
+ } else {
+ *Value = 0;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+
+Routine Description:
+
+ Sets the state of a GPIO pin
+
+Arguments:
+
+ This - pointer to protocol
+ Gpio - which pin to modify
+ Mode - mode to set
+
+Returns:
+
+ EFI_SUCCESS - GPIO set as requested
+ EFI_UNSUPPORTED - Mode is not supported
+ EFI_INVALID_PARAMETER - Gpio pin is out of range
+**/
+STATIC
+EFI_STATUS
+MvGpioSet (
+ IN EMBEDDED_GPIO *This,
+ IN EMBEDDED_GPIO_PIN Gpio,
+ IN EMBEDDED_GPIO_MODE Mode
+ )
+{
+ UINTN ControllerIndex;
+ UINTN BaseAddress;
+ UINTN GpioPin;
+
+ GpioPin = GPIO_PIN (Gpio);
+ ControllerIndex = GPIO_PORT (Gpio);
+
+ ASSERT_EFI_ERROR (MvGpioValidate (ControllerIndex, GpioPin));
+
+ BaseAddress = mGpioInstance->SoCGpio[ControllerIndex].RegisterBase;
+
+ switch (Mode) {
+ case GPIO_MODE_OUTPUT_0:
+ MmioAnd32 (BaseAddress + MV_GPIO_DATA_OUT_REG, ~(1 << GpioPin));
+ MmioAnd32 (BaseAddress + MV_GPIO_OUT_EN_REG, ~(1 << GpioPin));
+ break;
+
+ case GPIO_MODE_OUTPUT_1:
+ MmioOr32 (BaseAddress + MV_GPIO_DATA_OUT_REG, (1 << GpioPin));
+ MmioAnd32 (BaseAddress + MV_GPIO_OUT_EN_REG, ~(1 << GpioPin));
+ break;
+
+ case GPIO_MODE_INPUT:
+ MmioOr32 (BaseAddress + MV_GPIO_OUT_EN_REG, (1 << GpioPin));
+ break;
+
+ default:
+ return EFI_UNSUPPORTED;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+
+Routine Description:
+
+ Sets the pull-up / pull-down resistor of a GPIO pin
+
+Arguments:
+
+ This - pointer to protocol
+ Gpio - which pin
+ Direction - pull-up, pull-down, or none
+
+Returns:
+
+ EFI_UNSUPPORTED - Can not perform the requested operation
+
+**/
+EFI_STATUS
+EFIAPI
+MvGpioSetPull (
+ IN EMBEDDED_GPIO *This,
+ IN EMBEDDED_GPIO_PIN Gpio,
+ IN EMBEDDED_GPIO_PULL Direction
+ )
+{
+ return EFI_UNSUPPORTED;
+}
+
+STATIC
+VOID
+MvGpioInitProtocol (
+ IN EMBEDDED_GPIO *GpioProtocol
+ )
+{
+ GpioProtocol->Get = MvGpioGet;
+ GpioProtocol->Set = MvGpioSet;
+ GpioProtocol->GetMode = MvGpioGetMode;
+ GpioProtocol->SetPull = MvGpioSetPull;
+}
+
+EFI_STATUS
+EFIAPI
+MvGpioEntryPoint (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ MARVELL_BOARD_DESC_PROTOCOL *MvBoardProtocol;
+ MV_BOARD_GPIO_DESCRIPTION *GpioDescription;
+ MV_GPIO_DEVICE_PATH *GpioDevicePath;
+ EFI_STATUS Status;
+
+ GpioDevicePath = AllocateCopyPool (sizeof (MV_GPIO_DEVICE_PATH),
+ &mDevicePathTemplate);
+ if (GpioDevicePath == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ mGpioInstance = AllocateZeroPool (sizeof (MV_GPIO));
+ if (mGpioInstance == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto ErrGpioInstanceAlloc;
+ }
+
+ /* Obtain list of available controllers */
+ Status = gBS->LocateProtocol (&gMarvellBoardDescProtocolGuid,
+ NULL,
+ (VOID **)&MvBoardProtocol);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Cannot locate BoardDesc protocol\n",
+ __FUNCTION__));
+ goto ErrLocateBoardDesc;
+ }
+
+ Status = MvBoardProtocol->GpioDescriptionGet (MvBoardProtocol,
+ &GpioDescription);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Cannot get GPIO board desc from BoardDesc protocol\n",
+ __FUNCTION__));
+ goto ErrLocateBoardDesc;
+ }
+
+ mGpioInstance->Signature = MV_GPIO_SIGNATURE;
+ mGpioInstance->GpioDeviceCount = GpioDescription->GpioDeviceCount;
+ mGpioInstance->SoCGpio = GpioDescription->SoCGpio;
+
+ MvGpioInitProtocol (&mGpioInstance->GpioProtocol);
+
+ Status = gBS->InstallMultipleProtocolInterfaces (&(mGpioInstance->Handle),
+ &gEmbeddedGpioProtocolGuid,
+ &(mGpioInstance->GpioProtocol),
+ &gEfiDevicePathProtocolGuid,
+ (EFI_DEVICE_PATH_PROTOCOL *)GpioDevicePath,
+ NULL);
+ if (EFI_ERROR (Status)) {
+ goto ErrLocateBoardDesc;
+ }
+
+ return EFI_SUCCESS;
+
+ErrLocateBoardDesc:
+ gBS->FreePool (mGpioInstance);
+
+ErrGpioInstanceAlloc:
+ gBS->FreePool (GpioDevicePath);
+
+ return Status;
+}
--
2.7.4
next prev parent reply other threads:[~2019-01-17 11:15 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-17 11:15 [platforms: PATCH v3 00/12] Armada 7k8k GPIO support Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 01/12] Marvell/Library: ArmadaSoCDescLib: Add GPIO information Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 02/12] Marvell/Library: ArmadaBoardDescLib: " Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 03/12] Marvell/Library: Introduce MvGpioLib class Marcin Wojtas
2019-01-17 11:33 ` Leif Lindholm
2019-01-17 12:19 ` Marcin Wojtas
2019-01-17 14:18 ` Leif Lindholm
2019-01-17 14:39 ` Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 04/12] SolidRun/Armada80x0McBin: Extend board description library with GPIO Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 05/12] Marvell/Armada70x0Db: " Marcin Wojtas
2019-01-17 11:34 ` Leif Lindholm
2019-01-17 11:15 ` [platforms: PATCH v3 06/12] Marvell/Armada80x0Db: " Marcin Wojtas
2019-01-17 11:34 ` Leif Lindholm
2019-01-17 11:15 ` [platforms: PATCH v3 07/12] Marvell/Drivers: MvBoardDesc: Extend protocol with GPIO support Marcin Wojtas
2019-01-17 11:50 ` Leif Lindholm
2019-01-17 11:15 ` Marcin Wojtas [this message]
2019-01-17 11:52 ` [platforms: PATCH v3 08/12] Marvell/Drivers: MvGpioDxe: Introduce platform GPIO driver Leif Lindholm
2019-01-17 11:15 ` [platforms: PATCH v3 09/12] Marvell/Drivers: I2c: Use common header for macros Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 10/12] Marvell/Drivers: MvPca95xxDxe: Introduce GPIO expander driver Marcin Wojtas
2019-01-17 11:55 ` Leif Lindholm
2019-01-17 11:15 ` [platforms: PATCH v3 11/12] Marvell/Armada7k8k: Enable GPIO drivers compilation Marcin Wojtas
2019-01-17 11:15 ` [platforms: PATCH v3 12/12] Marvell/Armada7k8k: Introduce NonDiscoverable device init routines Marcin Wojtas
2019-01-17 12:03 ` [platforms: PATCH v3 00/12] Armada 7k8k GPIO support Leif Lindholm
2019-01-17 12:26 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1547723715-4562-9-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox