From: tien.hock.loh@intel.com
To: edk2-devel@lists.01.org, leif.lindholm@linaro.org,
ard.biesheuvel@linaro.org, thloh85@gmail.com
Subject: [PATCH 4/4] EmbeddedPkg/DwEmmc: Check DMA completion in SendCommand
Date: Fri, 22 Feb 2019 15:52:47 +0800 [thread overview]
Message-ID: <1550821967-1630-5-git-send-email-tien.hock.loh@intel.com> (raw)
In-Reply-To: <1550821967-1630-1-git-send-email-tien.hock.loh@intel.com>
From: "Loh, Tien Hock" <tien.hock.loh@intel.com>
DwEmmcReadBlockData and DwEmmcWriteBlockData needs to check for the
transfer completion before returning. This also adds error checking
to the DMA transfer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>
---
EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c b/EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c
index c232309..baf299d 100644
--- a/EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c
+++ b/EmbeddedPkg/Drivers/DwEmmcDxe/DwEmmcDxe.c
@@ -563,8 +563,9 @@ DwEmmcReadBlockData (
)
{
EFI_STATUS Status;
- UINT32 DescPages, CountPerPage, Count;
+ UINT32 DescPages, CountPerPage, Count, ErrMask;
EFI_TPL Tpl;
+ UINTN Rintsts;
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
@@ -587,6 +588,18 @@ DwEmmcReadBlockData (
DEBUG ((DEBUG_ERROR, "Failed to read data, mDwEmmcCommand:%x, mDwEmmcArgument:%x, Status:%r\n", mDwEmmcCommand, mDwEmmcArgument, Status));
goto out;
}
+
+ while(!((MmioRead32(DWEMMC_RINTSTS) & (DWEMMC_INT_DTO)))) {
+ Rintsts = MmioRead32 (DWEMMC_RINTSTS);
+ }
+ ErrMask = DWEMMC_INT_EBE | DWEMMC_INT_HLE | DWEMMC_INT_RTO |
+ DWEMMC_INT_RCRC | DWEMMC_INT_RE | DWEMMC_INT_DCRC |
+ DWEMMC_INT_DRT | DWEMMC_INT_SBE;
+
+ if (Rintsts & ErrMask) {
+ Status = EFI_DEVICE_ERROR;
+ goto out;
+ }
out:
// Restore Tpl
gBS->RestoreTPL (Tpl);
@@ -602,8 +615,9 @@ DwEmmcWriteBlockData (
)
{
EFI_STATUS Status;
- UINT32 DescPages, CountPerPage, Count;
+ UINT32 DescPages, CountPerPage, Count, ErrMask;
EFI_TPL Tpl;
+ UINTN Rintsts;
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
@@ -626,6 +640,18 @@ DwEmmcWriteBlockData (
DEBUG ((DEBUG_ERROR, "Failed to write data, mDwEmmcCommand:%x, mDwEmmcArgument:%x, Status:%r\n", mDwEmmcCommand, mDwEmmcArgument, Status));
goto out;
}
+
+ while(!((MmioRead32(DWEMMC_RINTSTS) & (DWEMMC_INT_DTO)))) {
+ Rintsts = MmioRead32 (DWEMMC_RINTSTS);
+ }
+ ErrMask = DWEMMC_INT_EBE | DWEMMC_INT_HLE | DWEMMC_INT_RTO |
+ DWEMMC_INT_RCRC | DWEMMC_INT_RE | DWEMMC_INT_DCRC |
+ DWEMMC_INT_DRT | DWEMMC_INT_SBE;
+
+ if (Rintsts & ErrMask) {
+ Status = EFI_DEVICE_ERROR;
+ goto out;
+ }
out:
// Restore Tpl
gBS->RestoreTPL (Tpl);
--
2.2.2
next prev parent reply other threads:[~2019-02-22 7:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-22 7:52 [PATCH 0/4] EmbeddedPkg/DwEmmc: Fix bugs causing DwEmmc to fail to initialize tien.hock.loh
2019-02-22 7:52 ` [PATCH 1/4] EmbeddedPkg/DwEmmc: Remove unnecessary MicroSecondDelay tien.hock.loh
2019-02-22 7:52 ` [PATCH 2/4] EmbeddedPkg/DwEmmc: Fix SendCommand parameters tien.hock.loh
2019-02-22 7:52 ` [PATCH 3/4] EmbeddedPkg/DwEmmc: Fix DMA transfer length tien.hock.loh
2019-02-22 7:52 ` tien.hock.loh [this message]
2019-03-18 1:52 ` [PATCH 0/4] EmbeddedPkg/DwEmmc: Fix bugs causing DwEmmc to fail to initialize Loh, Tien Hock
-- strict thread matches above, loose matches on Subject: below --
2019-02-22 8:06 tien.hock.loh
2019-02-22 8:06 ` [PATCH 4/4] EmbeddedPkg/DwEmmc: Check DMA completion in SendCommand tien.hock.loh
2018-10-25 5:52 [PATCH 0/4] EmbeddedPkg/DwEmmc: Fix bugs causing DwEmmc to fail to initialize tien.hock.loh
2018-10-25 5:52 ` [PATCH 4/4] EmbeddedPkg/DwEmmc: Check DMA completion in SendCommand tien.hock.loh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1550821967-1630-5-git-send-email-tien.hock.loh@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox