From: "Marcin Wojtas" <mw@semihalf.com>
To: devel@edk2.groups.io
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
nadavh@marvell.com, mw@semihalf.com, jsd@semihalf.com,
jaz@semihalf.com, kostap@marvell.com, jeremy.linton@arm.com,
Jici.Gao@arm.com
Subject: [edk2-platforms: PATCH v2 0/6] Armada7k8k misc improvements
Date: Tue, 16 Apr 2019 11:22:20 +0200 [thread overview]
Message-ID: <1555406546-5261-1-git-send-email-mw@semihalf.com> (raw)
Hi,
A second version of the patchset brings one, though significant
change. An idea of using custom DtLoaderLib for the PMU IRQ handling
was dropped. Instead use existing PlatInitDxe. The EL3 service
is still switched off in the ExitBootServicesEvent. However its
execution depends on the gEdkiiPlatformHasAcpiGuid status check in the new
gEfiEventReadyToBootGuid routine.
The patches are available in the github:
https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/commits/misc-upstream-r20190416
I'm looking forward to your comments or remarks.
Best regards,
Marcin
Changelog:
v1 -> v2:
* 3/6
- Use PlatInitDxe and gEfiEventReadyToBootGuid event
Grzegorz Jaszczyk (1):
Marvell/Armada80x0Db: Configure the CP1, comphy-2 to work with SFI 10G
Marcin Wojtas (4):
Marvell/Armada7k8k: AcpiTables: Enable edge trigger of PMU interrupt
Marvell/Armada7k8k: Implement PMU interrupt handling
Marvell/Armada7k8k: Switch to software-based watchdog
Marvell/Armada7k8k: ArmadaSoCDescLib: Add more I2C controllers
Mark Kettenis (1):
Marvell/Armada7k8k: RealTimeClockLib: Update bus parameters
Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc | 2 +-
Platform/Marvell/Armada70x0Db/Armada70x0Db.dsc | 4 +-
Platform/Marvell/Armada80x0Db/Armada80x0Db.dsc | 4 +-
Silicon/Marvell/Armada7k8k/Armada7k8k.fdf | 2 +-
Silicon/Marvell/Armada7k8k/Drivers/PlatInitDxe/PlatInitDxe.inf | 6 ++
Silicon/Marvell/Armada7k8k/Library/Armada7k8kSoCDescLib/Armada7k8kSoCDescLib.h | 8 +-
Silicon/Marvell/Armada7k8k/Library/RealTimeClockLib/RealTimeClockLib.h | 7 +-
Silicon/Marvell/Include/IndustryStandard/MvSmc.h | 2 +
Silicon/Marvell/Armada7k8k/Drivers/PlatInitDxe/PlatInitDxe.c | 82 ++++++++++++++++++++
Silicon/Marvell/Armada7k8k/Library/Armada7k8kSoCDescLib/Armada7k8kSoCDescLib.c | 5 +-
Silicon/Marvell/Armada7k8k/Library/RealTimeClockLib/RealTimeClockLib.c | 5 ++
Silicon/Marvell/Armada7k8k/AcpiTables/Madt.aslc | 10 ++-
12 files changed, 123 insertions(+), 14 deletions(-)
--
2.7.4
next reply other threads:[~2019-04-16 9:23 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-16 9:22 Marcin Wojtas [this message]
2019-04-16 9:22 ` [edk2-platforms: PATCH v2 1/6] Marvell/Armada7k8k: RealTimeClockLib: Update bus parameters Marcin Wojtas
2019-04-16 9:22 ` [edk2-platforms: PATCH v2 2/6] Marvell/Armada7k8k: AcpiTables: Enable edge trigger of PMU interrupt Marcin Wojtas
2019-04-16 9:22 ` [edk2-platforms: PATCH v2 3/6] Marvell/Armada7k8k: Implement PMU interrupt handling Marcin Wojtas
2019-04-16 18:51 ` Ard Biesheuvel
2019-04-16 9:22 ` [edk2-platforms: PATCH v2 4/6] Marvell/Armada7k8k: Switch to software-based watchdog Marcin Wojtas
2019-04-16 9:22 ` [edk2-platforms: PATCH v2 5/6] Marvell/Armada7k8k: ArmadaSoCDescLib: Add more I2C controllers Marcin Wojtas
2019-04-16 9:22 ` [edk2-platforms: PATCH v2 6/6] Marvell/Armada80x0Db: Configure the CP1, comphy-2 to work with SFI 10G Marcin Wojtas
2019-04-16 18:51 ` [edk2-platforms: PATCH v2 0/6] Armada7k8k misc improvements Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1555406546-5261-1-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox