From: "Marcin Wojtas" <mw@semihalf.com>
To: devel@edk2.groups.io
Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org,
mw@semihalf.com, jsd@semihalf.com, jaz@semihalf.com,
kostap@marvell.com, Jici.Gao@arm.com,
Kornel Duleba <mindal@semihalf.com>
Subject: [edk2-platforms: PATCH v3 4/4] Marvell/Drivers: MvFvbDxe: Introduce non-mmio mode
Date: Thu, 25 Apr 2019 13:28:24 +0200 [thread overview]
Message-ID: <1556191704-28834-5-git-send-email-mw@semihalf.com> (raw)
In-Reply-To: <1556191704-28834-1-git-send-email-mw@semihalf.com>
From: Kornel Duleba <mindal@semihalf.com>
This path enables support for reading variables directly from flash without
relying on it to be memory mapped. It adds PcdSpiMemoryMapped PCD that
allows to switch between the modes. When in non-memory-mapped mode the
driver will copy the variables from flash to previously allocated buffer
and set PcdFlashNvStorageVariableBase64, PcdFlashNvStorageFtwWorkingBase64
and PcdFlashNvStorageFtwSpareBase64 accordingly. Because of that satisfy
a depex dependency with the FTW driver by hooking NvVarStoreFormattedLib.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
Silicon/Marvell/Marvell.dec | 2 +
Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc | 15 ++-
Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.inf | 10 +-
Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.h | 1 +
Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.c | 135 +++++++++++++++-----
5 files changed, 127 insertions(+), 36 deletions(-)
diff --git a/Silicon/Marvell/Marvell.dec b/Silicon/Marvell/Marvell.dec
index 641c53b..2b25ae9 100644
--- a/Silicon/Marvell/Marvell.dec
+++ b/Silicon/Marvell/Marvell.dec
@@ -137,6 +137,8 @@
#SPI
gMarvellTokenSpaceGuid.PcdSpiRegBase|0|UINT32|0x3000051
gMarvellTokenSpaceGuid.PcdSpiMemoryBase|0|UINT64|0x3000059
+ gMarvellTokenSpaceGuid.PcdSpiMemoryMapped|TRUE|BOOLEAN|0x3000060
+ gMarvellTokenSpaceGuid.PcdSpiVariableOffset|0|UINT32|0x3000061
gMarvellTokenSpaceGuid.PcdSpiMaxFrequency|0|UINT32|0x30000052
gMarvellTokenSpaceGuid.PcdSpiClockFrequency|0|UINT32|0x30000053
diff --git a/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc b/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
index ca3de2e..545b369 100644
--- a/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
+++ b/Silicon/Marvell/Armada7k8k/Armada7k8k.dsc.inc
@@ -256,6 +256,11 @@
# USB support
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE
+[PcdsDynamicDefault.common]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0xF93C0000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0xF93E0000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0xF93D0000
+
[PcdsFixedAtBuild.common]
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L"MARVELL_EFI"
gArmPlatformTokenSpaceGuid.PcdCoreCount|4
@@ -396,11 +401,10 @@
# Variable store - default values
#
gMarvellTokenSpaceGuid.PcdSpiMemoryBase|0xF9000000
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0xF93C0000
+ gMarvellTokenSpaceGuid.PcdSpiMemoryMapped|TRUE
+ gMarvellTokenSpaceGuid.PcdSpiVariableOffset|0x3C0000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x00010000
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0xF93D0000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x00010000
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0xF93E0000
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x00010000
!if $(CAPSULE_ENABLE)
@@ -558,7 +562,10 @@
# Variable services
#
Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.inf
- MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf {
+ <LibraryClasses>
+ NULL|EmbeddedPkg/Library/NvVarStoreFormattedLib/NvVarStoreFormattedLib.inf
+ }
MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
<LibraryClasses>
AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
diff --git a/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.inf b/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.inf
index e222075..128c538 100644
--- a/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.inf
+++ b/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.inf
@@ -76,13 +76,17 @@
gMarvellSpiMasterProtocolGuid
[FixedPcd]
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize
gMarvellTokenSpaceGuid.PcdSpiMemoryBase
+ gMarvellTokenSpaceGuid.PcdSpiMemoryMapped
+ gMarvellTokenSpaceGuid.PcdSpiVariableOffset
+
+[Pcd]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64
[Depex]
gEfiCpuArchProtocolGuid AND
diff --git a/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.h b/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.h
index 31e6e44..e8df9a5 100644
--- a/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.h
+++ b/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.h
@@ -55,6 +55,7 @@ typedef struct {
UINT32 Signature;
+ BOOLEAN IsMemoryMapped;
UINTN DeviceBaseAddress;
UINTN RegionBaseAddress;
UINTN Size;
diff --git a/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.c b/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.c
index cb006cd..b4fd29c 100644
--- a/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.c
+++ b/Silicon/Marvell/Drivers/Spi/MvFvbDxe/MvFvbDxe.c
@@ -52,6 +52,7 @@ STATIC CONST FVB_DEVICE mMvFvbFlashInstanceTemplate = {
FVB_FLASH_SIGNATURE, // Signature
+ FALSE, // IsMemoryMapped ... NEED TO BE FILLED
0, // DeviceBaseAddress ... NEED TO BE FILLED
0, // RegionBaseAddress ... NEED TO BE FILLED
SIZE_256KB, // Size
@@ -175,11 +176,14 @@ MvFvbInitFvAndVariableStoreHeaders (
FirmwareVolumeHeader->Attributes = EFI_FVB2_READ_ENABLED_CAP |
EFI_FVB2_READ_STATUS |
EFI_FVB2_STICKY_WRITE |
- EFI_FVB2_MEMORY_MAPPED |
EFI_FVB2_ERASE_POLARITY |
EFI_FVB2_WRITE_STATUS |
EFI_FVB2_WRITE_ENABLED_CAP;
+ if (FlashInstance->IsMemoryMapped) {
+ FirmwareVolumeHeader->Attributes |= EFI_FVB2_MEMORY_MAPPED;
+ }
+
FirmwareVolumeHeader->HeaderLength = sizeof (EFI_FIRMWARE_VOLUME_HEADER) +
sizeof (EFI_FV_BLOCK_MAP_ENTRY);
FirmwareVolumeHeader->Revision = EFI_FVH_REVISION;
@@ -349,10 +353,13 @@ MvFvbSetAttributes (
EFI_FVB_ATTRIBUTES_2 OldAttributes;
EFI_FVB_ATTRIBUTES_2 FlashFvbAttributes;
EFI_FVB_ATTRIBUTES_2 UnchangedAttributes;
+ FVB_DEVICE *FlashInstance;
UINT32 Capabilities;
UINT32 OldStatus;
UINT32 NewStatus;
+ FlashInstance = INSTANCE_FROM_FVB_THIS (This);
+
//
// Obtain attributes from FVB header
//
@@ -369,12 +376,15 @@ MvFvbSetAttributes (
EFI_FVB2_WRITE_ENABLED_CAP | \
EFI_FVB2_LOCK_CAP | \
EFI_FVB2_STICKY_WRITE | \
- EFI_FVB2_MEMORY_MAPPED | \
EFI_FVB2_ERASE_POLARITY | \
EFI_FVB2_READ_LOCK_CAP | \
EFI_FVB2_WRITE_LOCK_CAP | \
EFI_FVB2_ALIGNMENT;
+ if (FlashInstance->IsMemoryMapped) {
+ UnchangedAttributes |= EFI_FVB2_MEMORY_MAPPED;
+ }
+
//
// Some attributes of FV is read only can *not* be set
//
@@ -692,6 +702,7 @@ MvFvbWrite (
IN UINT8 *Buffer
)
{
+ EFI_STATUS Status;
FVB_DEVICE *FlashInstance;
UINTN DataOffset;
@@ -701,10 +712,27 @@ MvFvbWrite (
FlashInstance->StartLba + Lba,
FlashInstance->Media.BlockSize);
- return FlashInstance->SpiFlashProtocol->Write (&FlashInstance->SpiDevice,
- DataOffset,
- *NumBytes,
- Buffer);
+ Status = FlashInstance->SpiFlashProtocol->Write (&FlashInstance->SpiDevice,
+ DataOffset,
+ *NumBytes,
+ Buffer);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR,
+ "%a: Failed to write to Spi device\n",
+ __FUNCTION__));
+ return Status;
+ }
+
+ // Update shadow buffer
+ if (!FlashInstance->IsMemoryMapped) {
+ DataOffset = GET_DATA_OFFSET (FlashInstance->RegionBaseAddress + Offset,
+ FlashInstance->StartLba + Lba,
+ FlashInstance->Media.BlockSize);
+
+ CopyMem ((UINTN *)DataOffset, Buffer, *NumBytes);
+ }
+
+ return EFI_SUCCESS;
}
/**
@@ -975,6 +1003,9 @@ MvFvbConfigureFlashInstance (
)
{
EFI_STATUS Status;
+ UINTN *NumBytes;
+ UINTN DataOffset;
+ UINTN VariableSize, FtwWorkingSize, FtwSpareSize, MemorySize;
// Locate SPI protocols
@@ -1009,25 +1040,62 @@ MvFvbConfigureFlashInstance (
}
// Fill remaining flash description
- FlashInstance->DeviceBaseAddress = PcdGet64 (PcdSpiMemoryBase);
- FlashInstance->RegionBaseAddress = FixedPcdGet64 (PcdFlashNvStorageVariableBase64);
- FlashInstance->FvbOffset = FlashInstance->RegionBaseAddress -
- FlashInstance->DeviceBaseAddress;
- FlashInstance->FvbSize = PcdGet32(PcdFlashNvStorageVariableSize) +
- PcdGet32(PcdFlashNvStorageFtwWorkingSize) +
- PcdGet32(PcdFlashNvStorageFtwSpareSize);
+ VariableSize = PcdGet32 (PcdFlashNvStorageVariableSize);
+ FtwWorkingSize = PcdGet32 (PcdFlashNvStorageFtwWorkingSize);
+ FtwSpareSize = PcdGet32 (PcdFlashNvStorageFtwSpareSize);
+
+ FlashInstance->IsMemoryMapped = PcdGetBool (PcdSpiMemoryMapped);
+ FlashInstance->FvbSize = VariableSize + FtwWorkingSize + FtwSpareSize;
+ FlashInstance->FvbOffset = PcdGet32 (PcdSpiVariableOffset);
FlashInstance->Media.MediaId = 0;
FlashInstance->Media.BlockSize = FlashInstance->SpiDevice.Info->SectorSize;
FlashInstance->Media.LastBlock = FlashInstance->Size /
FlashInstance->Media.BlockSize - 1;
+ if (FlashInstance->IsMemoryMapped) {
+ FlashInstance->DeviceBaseAddress = PcdGet64 (PcdSpiMemoryBase);
+ FlashInstance->RegionBaseAddress = PcdGet64 (PcdFlashNvStorageVariableBase64);
+ } else {
+ MemorySize = EFI_SIZE_TO_PAGES (FlashInstance->FvbSize);
+
+ // FaultTolerantWriteDxe requires memory to be aligned to FtwWorkingSize
+ FlashInstance->RegionBaseAddress = (UINTN) AllocateAlignedRuntimePages (MemorySize,
+ SIZE_64KB);
+ if (FlashInstance->RegionBaseAddress == (UINTN) NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ PcdSet64 (PcdFlashNvStorageVariableBase64,
+ (UINT64) FlashInstance->RegionBaseAddress);
+ PcdSet64 (PcdFlashNvStorageFtwWorkingBase64,
+ (UINT64) FlashInstance->RegionBaseAddress
+ + VariableSize);
+ PcdSet64 (PcdFlashNvStorageFtwSpareBase64,
+ (UINT64) FlashInstance->RegionBaseAddress
+ + VariableSize
+ + FtwWorkingSize);
+
+ // Fill the buffer with data from flash
+ DataOffset = GET_DATA_OFFSET (FlashInstance->FvbOffset,
+ FlashInstance->StartLba,
+ FlashInstance->Media.BlockSize);
+ *NumBytes = FlashInstance->FvbSize;
+ Status = FlashInstance->SpiFlashProtocol->Read (&FlashInstance->SpiDevice,
+ DataOffset,
+ *NumBytes,
+ (VOID *)FlashInstance->RegionBaseAddress);
+ if (EFI_ERROR (Status)) {
+ goto ErrorFreeAllocatedPages;
+ }
+ }
+
Status = gBS->InstallMultipleProtocolInterfaces (&FlashInstance->Handle,
&gEfiDevicePathProtocolGuid, &FlashInstance->DevicePath,
&gEfiFirmwareVolumeBlockProtocolGuid, &FlashInstance->FvbProtocol,
NULL);
if (EFI_ERROR (Status)) {
- return Status;
+ goto ErrorFreeAllocatedPages;
}
Status = MvFvbPrepareFvHeader (FlashInstance);
@@ -1043,6 +1111,12 @@ ErrorPrepareFvbHeader:
&gEfiFirmwareVolumeBlockProtocolGuid,
NULL);
+ErrorFreeAllocatedPages:
+ if (!FlashInstance->IsMemoryMapped) {
+ FreeAlignedPages ((VOID *)FlashInstance->RegionBaseAddress,
+ MemorySize);
+ }
+
return Status;
}
@@ -1094,24 +1168,27 @@ MvFvbEntryPoint (
//
// Declare the Non-Volatile storage as EFI_MEMORY_RUNTIME
//
- RuntimeMmioRegionSize = mFvbDevice->FvbSize;
RegionBaseAddress = mFvbDevice->RegionBaseAddress;
- Status = gDS->AddMemorySpace (EfiGcdMemoryTypeMemoryMappedIo,
- RegionBaseAddress,
- RuntimeMmioRegionSize,
- EFI_MEMORY_UC | EFI_MEMORY_RUNTIME);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "%a: Failed to add memory space\n", __FUNCTION__));
- goto ErrorAddSpace;
- }
+ if (mFvbDevice->IsMemoryMapped) {
+ RuntimeMmioRegionSize = mFvbDevice->FvbSize;
+ Status = gDS->AddMemorySpace (EfiGcdMemoryTypeMemoryMappedIo,
+ RegionBaseAddress,
+ RuntimeMmioRegionSize,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Failed to add memory space\n", __FUNCTION__));
+ goto ErrorAddSpace;
+ }
- Status = gDS->SetMemorySpaceAttributes (RegionBaseAddress,
- RuntimeMmioRegionSize,
- EFI_MEMORY_UC | EFI_MEMORY_RUNTIME);
- if (EFI_ERROR (Status)) {
- DEBUG ((DEBUG_ERROR, "%a: Failed to set memory attributes\n", __FUNCTION__));
- goto ErrorSetMemAttr;
+
+ Status = gDS->SetMemorySpaceAttributes (RegionBaseAddress,
+ RuntimeMmioRegionSize,
+ EFI_MEMORY_UC | EFI_MEMORY_RUNTIME);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "%a: Failed to set memory attributes\n", __FUNCTION__));
+ goto ErrorSetMemAttr;
+ }
}
//
--
2.7.4
next prev parent reply other threads:[~2019-04-25 11:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-25 11:28 [edk2-platforms: PATCH v3 0/4] Armada7k8k FVB improvements Marcin Wojtas
2019-04-25 11:28 ` [edk2-platforms: PATCH v3 1/4] Marvell/Drivers: MvFvbDxe: Change Pcd parameters to be 64 bit Marcin Wojtas
2019-04-25 11:28 ` [edk2-platforms: PATCH v3 2/4] Marvell/Armada7k8k: Cleanup PEI phase FV Marcin Wojtas
2019-04-25 11:28 ` [edk2-platforms: PATCH v3 3/4] Marvell/Drivers/Spi: Improve modules dependencies Marcin Wojtas
2019-04-25 11:28 ` Marcin Wojtas [this message]
2019-04-25 12:01 ` [edk2-platforms: PATCH v3 0/4] Armada7k8k FVB improvements Leif Lindholm
2019-04-25 12:35 ` Marcin Wojtas
2019-04-29 13:54 ` Marcin Wojtas
2019-05-02 11:07 ` Ard Biesheuvel
2019-05-02 11:28 ` Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1556191704-28834-5-git-send-email-mw@semihalf.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox