From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: mx.groups.io; dkim=pass header.i=@semihalf-com.20150623.gappssmtp.com header.s=20150623 header.b=N152fqiW; spf=none, err=SPF record not found (domain: semihalf.com, ip: 209.85.167.67, mailfrom: mw@semihalf.com) Received: from mail-lf1-f67.google.com (mail-lf1-f67.google.com [209.85.167.67]) by groups.io with SMTP; Mon, 20 May 2019 08:28:01 -0700 Received: by mail-lf1-f67.google.com with SMTP id n134so10616002lfn.11 for ; Mon, 20 May 2019 08:28:00 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=semihalf-com.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=o/p09/vdfOYRIFws3jf/OIDDzAqvpySk/Ktl0XWas1Q=; b=N152fqiW/Pyy82Vj3/n2TFnc0BXTydWJ9gRWIDeGCJsrjKKn5YwnhdCHn3EJ18W6+6 fjZ0aGimJt3a3rEsV77rsUCzUmubVRJv1k0HoEXsrmT/gZ4c7eCRgZz8NGD4605n1Psd t4C/OW9dTPhN3RPtFF6uc9yC624zkRfWxN+5PAagzzUWhXrcjtgnTsJ0brN3ZkUTDSdj PwjVYKAl8PHWOzVgwUVzTs7kOZ96N9sCNCcX6fkOTon1GOZ4fgm/afJoH8JsyxYcfc4l OVrxoG+aaDcBfFxSzlklw4o424mHf3OQRS8nseUIFX/WAVKNMsfDKFOPMta9ywKMAe2A DIWQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=o/p09/vdfOYRIFws3jf/OIDDzAqvpySk/Ktl0XWas1Q=; b=MjVmNRep1VLlhDVGP5G4Y/KV5cn4kg/E8029IvQe8NZbPXHW6r+w6959+TdxmmoiZT ShRcZUiOq7BTX1dBA6Eva1r4VULlHJ0/lICFDhhAN/Uy6hhZ91w1fAiv5RseiULuzqVC vLzLaeD9Gnseu5IU9yDJcTDn0jZD5JGxdCreP33Y3bPcQcxwxEN6Jzj+RZ9BJRGAH+t/ bV/MwoiOq5P7lljy9y9BQaN32XF1nm9IWIvLB+ZHn79vFiUKsIi9y8Sir7T54giee4xj Vk3W+QCNeIV2fzrkiXPIrrpWuqBa4Bl/xw2hGYQTFTInmiONQMvS2zmv681GCpYlBuuU oaZw== X-Gm-Message-State: APjAAAWYQroxi24gYcFzMGN9jGU9rv2fk4YF8NtvefSnoBodjLFgJZpf vX9CqhrlFZuThjGMxPaqbaqmB5O2qig= X-Google-Smtp-Source: APXvYqwS+524d8JhJAbU2coF2IjXwRp8hJ57H1gqsSgvWQezKSuEyGuuHndHbG4MYwwRuilTikUqNw== X-Received: by 2002:a19:81d4:: with SMTP id c203mr36406526lfd.160.1558366078112; Mon, 20 May 2019 08:27:58 -0700 (PDT) Return-Path: Received: from gilgamesh.semihalf.com (31-172-191-173.noc.fibertech.net.pl. [31.172.191.173]) by smtp.gmail.com with ESMTPSA id d5sm3906205lji.85.2019.05.20.08.27.56 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 20 May 2019 08:27:57 -0700 (PDT) From: "Marcin Wojtas" To: devel@edk2.groups.io Cc: leif.lindholm@linaro.org, ard.biesheuvel@linaro.org, mw@semihalf.com, jsd@semihalf.com, jaz@semihalf.com, kostap@marvell.com, Jici.Gao@arm.com, rebecca@bluestop.org, kettenis@jive.eu Subject: [edk2-platforms: PATCH v2 06/14] Marvell/Armada7k8k: Add PciExpressLib implementation Date: Mon, 20 May 2019 17:27:19 +0200 Message-Id: <1558366047-15994-7-git-send-email-mw@semihalf.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1558366047-15994-1-git-send-email-mw@semihalf.com> References: <1558366047-15994-1-git-send-email-mw@semihalf.com> From: Ard Biesheuvel Implement a special version of PciExpressLib that takes the quirky nature of the Synopsys Designware PCIe IP into account. In particular, we need to ignore config space accesses to all devices on the first bus except device 0, because the broadcast nature of type 0 configuration cycles will result in whatever device is in the slot to appear at each of the 32 device positions. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Marcin Wojtas --- Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf | 42 + Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c | 1531 ++++++++++++++++++++ 2 files changed, 1573 insertions(+) create mode 100644 Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf create mode 100644 Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c diff --git a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf new file mode 100644 index 0000000..a66ef28 --- /dev/null +++ b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.inf @@ -0,0 +1,42 @@ +## @file +# +# Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+# Copyright (c) 2019, Marvell International Ltd. All rights reserved.
+# +# This program and the accompanying materials +# are licensed and made available under the terms and conditions of the BSD License +# which accompanies this distribution. The full text of the license may be found at +# http://opensource.org/licenses/bsd-license.php. +# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, +# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. +# +# +## + +[Defines] + INF_VERSION = 0x0001001B + BASE_NAME = Armada7k8kPciExpressLib + FILE_GUID = f0926204-3061-40ed-8261-2aeccc7914c9 + MODULE_TYPE = BASE + VERSION_STRING = 1.0 + LIBRARY_CLASS = PciExpressLib + +[Sources] + PciExpressLib.c + +[Packages] + ArmPkg/ArmPkg.dec + MdePkg/MdePkg.dec + +[LibraryClasses] + BaseLib + DebugLib + IoLib + PcdLib + +[Pcd] + gEfiMdePkgTokenSpaceGuid.PcdPciExpressBaseAddress ## CONSUMES + +[FixedPcd] + gArmTokenSpaceGuid.PcdPciBusMin + gArmTokenSpaceGuid.PcdPciBusMax diff --git a/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c new file mode 100644 index 0000000..e88cc7b --- /dev/null +++ b/Silicon/Marvell/Armada7k8k/Library/Armada7k8kPciExpressLib/PciExpressLib.c @@ -0,0 +1,1531 @@ +/** @file + + Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.
+ Copyright (c) 2017, Linaro, Ltd. All rights reserved.
+ Copyright (c) 2019, Marvell International Ltd. All rights reserved.
+ + This program and the accompanying materials + are licensed and made available under the terms and conditions of the BSD License + which accompanies this distribution. The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + + +#include + +#include +#include +#include +#include +#include + +/** + Assert the validity of a PCI address. A valid PCI address should contain 1's + only in the low 28 bits. + + @param A The address to validate. + +**/ +#define ASSERT_INVALID_PCI_ADDRESS(A) \ + ASSERT (((A) & ~0xfffffff) == 0) + +/** + Registers a PCI device so PCI configuration registers may be accessed after + SetVirtualAddressMap(). + + Registers the PCI device specified by Address so all the PCI configuration + registers associated with that PCI device may be accessed after SetVirtualAddressMap() + is called. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + + @retval RETURN_SUCCESS The PCI device was registered for runtime access. + @retval RETURN_UNSUPPORTED An attempt was made to call this function + after ExitBootServices(). + @retval RETURN_UNSUPPORTED The resources required to access the PCI device + at runtime could not be mapped. + @retval RETURN_OUT_OF_RESOURCES There are not enough resources available to + complete the registration. + +**/ +RETURN_STATUS +EFIAPI +PciExpressRegisterForRuntimeAccess ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + return RETURN_UNSUPPORTED; +} + +#define ECAM_BUS_SIZE SIZE_1MB +#define ECAM_DEV_SIZE SIZE_32KB + +STATIC +BOOLEAN +IgnoreBusDeviceFunction ( + IN UINTN Address + ) +{ + ASSERT (Address >= FixedPcdGet32 (PcdPciBusMin) * ECAM_BUS_SIZE); + ASSERT (Address < (FixedPcdGet32 (PcdPciBusMax) + 1) * ECAM_BUS_SIZE); + + // + // Type 0 configuration cycles contain a b/d/f specifier, however + // the endpoint is unaware of its own device number and responds to all + // of them. The bus is responsible to ensure for assigning proper + // device/function. Sadly, the Synopsys IP does not implement this, + // and so we have to ignore config space accesses for all devices on the + // first bus except device 0. + // + return (Address >= (FixedPcdGet32 (PcdPciBusMin) * ECAM_BUS_SIZE + + ECAM_DEV_SIZE) && + Address < (FixedPcdGet32 (PcdPciBusMin) + 1) * ECAM_BUS_SIZE); +} + +/** + Gets the base address of PCI Express. + + This internal functions retrieves PCI Express Base Address via a PCD entry + PcdPciExpressBaseAddress. + + @return The base address of PCI Express. + +**/ +VOID * +GetPciExpressBaseAddress ( + VOID + ) +{ + return (VOID *)(UINTN)PcdGet64 (PcdPciExpressBaseAddress); +} + +/** + Reads an 8-bit PCI configuration register. + + Reads and returns the 8-bit PCI configuration register specified by Address. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + + @return The read value from the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressRead8 ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioRead8 ((UINTN)GetPciExpressBaseAddress () + Address); +} + +/** + Writes an 8-bit PCI configuration register. + + Writes the 8-bit PCI configuration register specified by Address with the + value specified by Value. Value is returned. This function must guarantee + that all PCI read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param Value The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressWrite8 ( + IN UINTN Address, + IN UINT8 Value + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioWrite8 ((UINTN)GetPciExpressBaseAddress () + Address, Value); +} + +/** + Performs a bitwise OR of an 8-bit PCI configuration register with + an 8-bit value. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 8-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressOr8 ( + IN UINTN Address, + IN UINT8 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioOr8 ((UINTN)GetPciExpressBaseAddress () + Address, OrData); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit + value. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 8-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressAnd8 ( + IN UINTN Address, + IN UINT8 AndData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioAnd8 ((UINTN)GetPciExpressBaseAddress () + Address, AndData); +} + +/** + Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit + value, followed a bitwise OR with another 8-bit value. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, + performs a bitwise OR between the result of the AND operation and + the value specified by OrData, and writes the result to the 8-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressAndThenOr8 ( + IN UINTN Address, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioAndThenOr8 ( + (UINTN)GetPciExpressBaseAddress () + Address, + AndData, + OrData + ); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in an 8-bit PCI configuration register. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address The PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + + @return The value of the bit field read from the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressBitFieldRead8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioBitFieldRead8 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit + ); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of the + 8-bit register is returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param Value The new value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressBitFieldWrite8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 Value + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioBitFieldWrite8 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + Value + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and + writes the result back to the bit field in the 8-bit port. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 8-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. Extra left bits in OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressBitFieldOr8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioBitFieldOr8 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + OrData + ); +} + +/** + Reads a bit field in an 8-bit PCI configuration register, performs a bitwise + AND, and writes the result back to the bit field in the 8-bit register. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 8-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressBitFieldAnd8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioBitFieldAnd8 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + AndData + ); +} + +/** + Reads a bit field in an 8-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 8-bit port. + + Reads the 8-bit PCI configuration register specified by Address, performs a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 8-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in both AndData and + OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If StartBit is greater than 7, then ASSERT(). + If EndBit is greater than 7, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..7. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..7. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT8 +EFIAPI +PciExpressBitFieldAndThenOr8 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT8 AndData, + IN UINT8 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT8; + } + return MmioBitFieldAndThenOr8 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + AndData, + OrData + ); +} + +/** + Reads a 16-bit PCI configuration register. + + Reads and returns the 16-bit PCI configuration register specified by Address. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + + @return The read value from the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressRead16 ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioRead16 ((UINTN)GetPciExpressBaseAddress () + Address); +} + +/** + Writes a 16-bit PCI configuration register. + + Writes the 16-bit PCI configuration register specified by Address with the + value specified by Value. Value is returned. This function must guarantee + that all PCI read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param Value The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressWrite16 ( + IN UINTN Address, + IN UINT16 Value + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioWrite16 ((UINTN)GetPciExpressBaseAddress () + Address, Value); +} + +/** + Performs a bitwise OR of a 16-bit PCI configuration register with + a 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 16-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressOr16 ( + IN UINTN Address, + IN UINT16 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioOr16 ((UINTN)GetPciExpressBaseAddress () + Address, OrData); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit + value. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 16-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressAnd16 ( + IN UINTN Address, + IN UINT16 AndData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioAnd16 ((UINTN)GetPciExpressBaseAddress () + Address, AndData); +} + +/** + Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit + value, followed a bitwise OR with another 16-bit value. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, + performs a bitwise OR between the result of the AND operation and + the value specified by OrData, and writes the result to the 16-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressAndThenOr16 ( + IN UINTN Address, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioAndThenOr16 ( + (UINTN)GetPciExpressBaseAddress () + Address, + AndData, + OrData + ); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 16-bit PCI configuration register. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address The PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + + @return The value of the bit field read from the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressBitFieldRead16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioBitFieldRead16 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit + ); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of the + 16-bit register is returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param Value The new value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressBitFieldWrite16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 Value + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioBitFieldWrite16 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + Value + ); +} + +/** + Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and + writes the result back to the bit field in the 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 16-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. Extra left bits in OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressBitFieldOr16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioBitFieldOr16 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + OrData + ); +} + +/** + Reads a bit field in a 16-bit PCI configuration register, performs a bitwise + AND, and writes the result back to the bit field in the 16-bit register. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 16-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressBitFieldAnd16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioBitFieldAnd16 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + AndData + ); +} + +/** + Reads a bit field in a 16-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 16-bit port. + + Reads the 16-bit PCI configuration register specified by Address, performs a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 16-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in both AndData and + OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 16-bit boundary, then ASSERT(). + If StartBit is greater than 15, then ASSERT(). + If EndBit is greater than 15, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..15. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..15. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT16 +EFIAPI +PciExpressBitFieldAndThenOr16 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT16 AndData, + IN UINT16 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT16; + } + return MmioBitFieldAndThenOr16 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + AndData, + OrData + ); +} + +/** + Reads a 32-bit PCI configuration register. + + Reads and returns the 32-bit PCI configuration register specified by Address. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + + @return The read value from the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressRead32 ( + IN UINTN Address + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } + return MmioRead32 ((UINTN)GetPciExpressBaseAddress () + Address); +} + +/** + Writes a 32-bit PCI configuration register. + + Writes the 32-bit PCI configuration register specified by Address with the + value specified by Value. Value is returned. This function must guarantee + that all PCI read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param Value The value to write. + + @return The value written to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressWrite32 ( + IN UINTN Address, + IN UINT32 Value + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } + return MmioWrite32 ((UINTN)GetPciExpressBaseAddress () + Address, Value); +} + +/** + Performs a bitwise OR of a 32-bit PCI configuration register with + a 32-bit value. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 32-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressOr32 ( + IN UINTN Address, + IN UINT32 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } + return MmioOr32 ((UINTN)GetPciExpressBaseAddress () + Address, OrData); +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit + value. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 32-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressAnd32 ( + IN UINTN Address, + IN UINT32 AndData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } +return MmioAnd32 ((UINTN)GetPciExpressBaseAddress () + Address, AndData); +} + +/** + Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit + value, followed a bitwise OR with another 32-bit value. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, + performs a bitwise OR between the result of the AND operation and + the value specified by OrData, and writes the result to the 32-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + + @param Address The address that encodes the PCI Bus, Device, Function and + Register. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressAndThenOr32 ( + IN UINTN Address, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } + return MmioAndThenOr32 ( + (UINTN)GetPciExpressBaseAddress () + Address, + AndData, + OrData + ); +} + +/** + Reads a bit field of a PCI configuration register. + + Reads the bit field in a 32-bit PCI configuration register. The bit field is + specified by the StartBit and the EndBit. The value of the bit field is + returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + + @param Address The PCI configuration register to read. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + + @return The value of the bit field read from the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressBitFieldRead32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } + return MmioBitFieldRead32 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit + ); +} + +/** + Writes a bit field to a PCI configuration register. + + Writes Value to the bit field of the PCI configuration register. The bit + field is specified by the StartBit and the EndBit. All other bits in the + destination PCI configuration register are preserved. The new value of the + 32-bit register is returned. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param Value The new value of the bit field. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressBitFieldWrite32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 Value + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } + return MmioBitFieldWrite32 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + Value + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and + writes the result back to the bit field in the 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise OR between the read result and the value specified by + OrData, and writes the result to the 32-bit PCI configuration register + specified by Address. The value written to the PCI configuration register is + returned. This function must guarantee that all PCI read and write operations + are serialized. Extra left bits in OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param OrData The value to OR with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressBitFieldOr32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } + return MmioBitFieldOr32 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + OrData + ); +} + +/** + Reads a bit field in a 32-bit PCI configuration register, performs a bitwise + AND, and writes the result back to the bit field in the 32-bit register. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise AND between the read result and the value specified by AndData, and + writes the result to the 32-bit PCI configuration register specified by + Address. The value written to the PCI configuration register is returned. + This function must guarantee that all PCI read and write operations are + serialized. Extra left bits in AndData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressBitFieldAnd32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } + return MmioBitFieldAnd32 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + AndData + ); +} + +/** + Reads a bit field in a 32-bit port, performs a bitwise AND followed by a + bitwise OR, and writes the result back to the bit field in the + 32-bit port. + + Reads the 32-bit PCI configuration register specified by Address, performs a + bitwise AND followed by a bitwise OR between the read result and + the value specified by AndData, and writes the result to the 32-bit PCI + configuration register specified by Address. The value written to the PCI + configuration register is returned. This function must guarantee that all PCI + read and write operations are serialized. Extra left bits in both AndData and + OrData are stripped. + + If Address > 0x0FFFFFFF, then ASSERT(). + If Address is not aligned on a 32-bit boundary, then ASSERT(). + If StartBit is greater than 31, then ASSERT(). + If EndBit is greater than 31, then ASSERT(). + If EndBit is less than StartBit, then ASSERT(). + If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). + + @param Address The PCI configuration register to write. + @param StartBit The ordinal of the least significant bit in the bit field. + Range 0..31. + @param EndBit The ordinal of the most significant bit in the bit field. + Range 0..31. + @param AndData The value to AND with the PCI configuration register. + @param OrData The value to OR with the result of the AND operation. + + @return The value written back to the PCI configuration register. + +**/ +UINT32 +EFIAPI +PciExpressBitFieldAndThenOr32 ( + IN UINTN Address, + IN UINTN StartBit, + IN UINTN EndBit, + IN UINT32 AndData, + IN UINT32 OrData + ) +{ + ASSERT_INVALID_PCI_ADDRESS (Address); + if (IgnoreBusDeviceFunction (Address)) { + return MAX_UINT32; + } + return MmioBitFieldAndThenOr32 ( + (UINTN)GetPciExpressBaseAddress () + Address, + StartBit, + EndBit, + AndData, + OrData + ); +} + +/** + Reads a range of PCI configuration registers into a caller supplied buffer. + + Reads the range of PCI configuration registers specified by StartAddress and + Size into the buffer specified by Buffer. This function only allows the PCI + configuration registers from a single PCI function to be read. Size is + returned. When possible 32-bit PCI configuration read cycles are used to read + from StartAddress to StartAddress + Size. Due to alignment restrictions, 8-bit + and 16-bit PCI configuration read cycles may be used at the beginning and the + end of the range. + + If StartAddress > 0x0FFFFFFF, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress The starting address that encodes the PCI Bus, Device, + Function and Register. + @param Size The size in bytes of the transfer. + @param Buffer The pointer to a buffer receiving the data read. + + @return Size read data from StartAddress. + +**/ +UINTN +EFIAPI +PciExpressReadBuffer ( + IN UINTN StartAddress, + IN UINTN Size, + OUT VOID *Buffer + ) +{ + UINTN ReturnValue; + + ASSERT_INVALID_PCI_ADDRESS (StartAddress); + ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000); + + if (Size == 0) { + return Size; + } + + ASSERT (Buffer != NULL); + + // + // Save Size for return + // + ReturnValue = Size; + + if ((StartAddress & 1) != 0) { + // + // Read a byte if StartAddress is byte aligned + // + MmioWrite8 ((UINTN)Buffer, PciExpressRead8 (StartAddress)); + StartAddress += sizeof (UINT8); + Size -= sizeof (UINT8); + Buffer = (UINT8 *)Buffer + 1; + } + + if (Size >= sizeof (UINT16)&& (StartAddress & 2) != 0) { + // + // Read a word if StartAddress is word aligned + // + WriteUnaligned16 ((UINT16 *)Buffer, (UINT16)PciExpressRead16 (StartAddress)); + + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16 *)Buffer + 1; + } + + while (Size >= sizeof (UINT32)) { + // + // Read as many double words as possible + // + WriteUnaligned32 ((UINT32 *)Buffer, (UINT32)PciExpressRead32 (StartAddress)); + + StartAddress += sizeof (UINT32); + Size -= sizeof (UINT32); + Buffer = (UINT32 *)Buffer + 1; + } + + if (Size >= sizeof (UINT16)) { + // + // Read the last remaining word if exist + // + WriteUnaligned16 ((UINT16 *)Buffer, (UINT16)PciExpressRead16 (StartAddress)); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16 *)Buffer + 1; + } + + if (Size >= sizeof (UINT8)) { + // + // Read the last remaining byte if exist + // + MmioWrite8 ((UINTN)Buffer, PciExpressRead8 (StartAddress)); + } + + return ReturnValue; +} + +/** + Copies the data in a caller supplied buffer to a specified range of PCI + configuration space. + + Writes the range of PCI configuration registers specified by StartAddress and + Size from the buffer specified by Buffer. This function only allows the PCI + configuration registers from a single PCI function to be written. Size is + returned. When possible 32-bit PCI configuration write cycles are used to + write from StartAddress to StartAddress + Size. Due to alignment restrictions, + 8-bit and 16-bit PCI configuration write cycles may be used at the beginning + and the end of the range. + + If StartAddress > 0x0FFFFFFF, then ASSERT(). + If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT(). + If Size > 0 and Buffer is NULL, then ASSERT(). + + @param StartAddress The starting address that encodes the PCI Bus, Device, + Function and Register. + @param Size The size in bytes of the transfer. + @param Buffer The pointer to a buffer containing the data to write. + + @return Size written to StartAddress. + +**/ +UINTN +EFIAPI +PciExpressWriteBuffer ( + IN UINTN StartAddress, + IN UINTN Size, + IN VOID *Buffer + ) +{ + UINTN ReturnValue; + + ASSERT_INVALID_PCI_ADDRESS (StartAddress); + ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000); + + if (Size == 0) { + return 0; + } + + ASSERT (Buffer != NULL); + + // + // Save Size for return + // + ReturnValue = Size; + + if ((StartAddress & 1) != 0) { + // + // Write a byte if StartAddress is byte aligned + // + PciExpressWrite8 (StartAddress, *(UINT8 *)Buffer); + StartAddress += sizeof (UINT8); + Size -= sizeof (UINT8); + Buffer = (UINT8 *)Buffer + 1; + } + + if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) { + // + // Write a word if StartAddress is word aligned + // + PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16 *)Buffer)); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16 *)Buffer + 1; + } + + while (Size >= sizeof (UINT32)) { + // + // Write as many double words as possible + // + PciExpressWrite32 (StartAddress, ReadUnaligned32 ((UINT32 *)Buffer)); + StartAddress += sizeof (UINT32); + Size -= sizeof (UINT32); + Buffer = (UINT32 *)Buffer + 1; + } + + if (Size >= sizeof (UINT16)) { + // + // Write the last remaining word if exist + // + PciExpressWrite16 (StartAddress, ReadUnaligned16 ((UINT16 *)Buffer)); + StartAddress += sizeof (UINT16); + Size -= sizeof (UINT16); + Buffer = (UINT16 *)Buffer + 1; + } + + if (Size >= sizeof (UINT8)) { + // + // Write the last remaining byte if exist + // + PciExpressWrite8 (StartAddress, *(UINT8 *)Buffer); + } + + return ReturnValue; +} -- 2.7.4