From: "Abner Chang" <abner.chang@hpe.com>
To: devel@edk2.groups.io
Cc: abner.chang@hpe.com,
Michael D Kinney <michael.d.kinney@intel.com>,
Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Leif Lindholm <leif.lindholm@linaro.org>,
Gilbert Chen <gilbert.chen@hpe.com>,
Palmer Dabbelt <palmer@sifive.com>
Subject: [platform/devel-riscv-v2 PATCHv5 09/18] U5SeriesPkg/SerialIoLib: Platform Serial Port library
Date: Mon, 28 Oct 2019 12:20:24 +0800 [thread overview]
Message-ID: <1572236433-15404-10-git-send-email-abner.chang@hpe.com> (raw)
In-Reply-To: <1572236433-15404-1-git-send-email-abner.chang@hpe.com>
Serial Port library for U5 series platform.
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Gilbert Chen <gilbert.chen@hpe.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
---
.../Library/SerialIoLib/SerialIoLib.inf | 38 ++++
.../Library/SerialIoLib/SerialPortLib.c | 253 +++++++++++++++++++++
.../Library/SerialIoLib/U5SerialPortLib.uni | 16 ++
3 files changed, 307 insertions(+)
create mode 100644 Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/SerialIoLib.inf
create mode 100644 Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/SerialPortLib.c
create mode 100644 Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/U5SerialPortLib.uni
diff --git a/Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/SerialIoLib.inf b/Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/SerialIoLib.inf
new file mode 100644
index 0000000..0044f84
--- /dev/null
+++ b/Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/SerialIoLib.inf
@@ -0,0 +1,38 @@
+## @file
+# Library instance for SerialIo library class
+#
+# Copyright (c) 2019, Hewlett Packard Enterprise Development LP. All rights reserved.<BR>
+#
+# SPDX-License-Identifier: BSD-2-Clause-Patent
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001b
+ BASE_NAME = U5SerialPortLib
+ MODULE_UNI_FILE = U5SerialPortLib.uni
+ FILE_GUID = FCC4FD2B-2FF6-4FFA-B363-7C1111E5DCE9
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = SerialPortLib
+#
+# The following information is for reference only and not required by the build tools.
+#
+# VALID_ARCHITECTURES = RISCV64
+#
+[Packages]
+ MdePkg/MdePkg.dec
+ RiscVPlatformPkg/RiscVPlatformPkg.dec
+ RiscVPkg/RiscVPkg.dec
+ Platform/SiFive/U5SeriesPkg/U5SeriesPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ IoLib
+ RiscVOpensbiLib
+
+[FixedPcd]
+ gSiFiveU5SeriesPlatformsPkgTokenSpaceGuid.PcdU5UartBase
+
+[Sources]
+ SerialPortLib.c
diff --git a/Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/SerialPortLib.c b/Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/SerialPortLib.c
new file mode 100644
index 0000000..5e06515
--- /dev/null
+++ b/Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/SerialPortLib.c
@@ -0,0 +1,253 @@
+/** @file
+ UART Serial Port library functions
+
+ Copyright (c) 2019, Hewlett Packard Enterprise Development LP. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Base.h>
+#include <Library/IoLib.h>
+#include <Library/SerialPortLib.h>
+#include <include/sbi_utils/serial/sifive-uart.h> // Reference to header file in opensbi
+
+//---------------------------------------------
+// UART Register Offsets
+//---------------------------------------------
+
+#define UART_REG_IP 5
+#define UART_IP_RXWM 0x02
+
+//---------------------------------------------
+// UART Settings
+//---------------------------------------------
+
+#define UART_BAUDRATE 115200
+#define SYS_CLK 100000000
+
+BOOLEAN Initiated = FALSE;
+
+/**
+ Initialize the serial device hardware.
+
+ If no initialization is required, then return RETURN_SUCCESS.
+ If the serial device was successfuly initialized, then return RETURN_SUCCESS.
+ If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.
+
+ @retval RETURN_SUCCESS The serial device was initialized.
+ @retval RETURN_DEVICE_ERROR The serail device could not be initialized.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortInitialize (
+ VOID
+ )
+{
+ if (Initiated) {
+ return RETURN_SUCCESS;
+ }
+ if (sifive_uart_init(FixedPcdGet32(PcdU5UartBase), SYS_CLK / 2, UART_BAUDRATE) != 0) {
+ return EFI_DEVICE_ERROR;
+ }
+ Initiated = TRUE;
+ return RETURN_SUCCESS;
+}
+
+/**
+ Write data from buffer to serial device.
+
+ Writes NumberOfBytes data bytes from Buffer to the serial device.
+ The number of bytes actually written to the serial device is returned.
+ If the return value is less than NumberOfBytes, then the write operation failed.
+
+ If Buffer is NULL, then ASSERT().
+
+ If NumberOfBytes is zero, then return 0.
+
+ @param Buffer Pointer to the data buffer to be written.
+ @param NumberOfBytes Number of bytes to written to the serial device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes written to the serial device.
+ If this value is less than NumberOfBytes, then the write operation failed.
+
+**/
+UINTN
+EFIAPI
+SerialPortWrite (
+ IN UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ UINTN Index;
+
+ if (Buffer == NULL || Initiated == FALSE) {
+ return 0;
+ }
+
+ for(Index = 0; Index < NumberOfBytes; Index ++) {
+ sifive_uart_putc (Buffer [Index]);
+ }
+
+ return Index;
+}
+
+/**
+ Reads data from a serial device into a buffer.
+
+ @param Buffer Pointer to the data buffer to store the data read from the serial device.
+ @param NumberOfBytes Number of bytes to read from the serial device.
+
+ @retval 0 NumberOfBytes is 0.
+ @retval >0 The number of bytes read from the serial device.
+ If this value is less than NumberOfBytes, then the read operation failed.
+
+**/
+UINTN
+EFIAPI
+SerialPortRead (
+ OUT UINT8 *Buffer,
+ IN UINTN NumberOfBytes
+ )
+{
+ UINTN Index;
+
+ if (NULL == Buffer || Initiated == FALSE) {
+ return 0;
+ }
+
+ for(Index = 0; Index < NumberOfBytes; Index ++) {
+ Buffer [Index] = (UINT8)sifive_uart_getc ();
+ }
+
+ return Index;
+}
+
+/**
+ Polls a serial device to see if there is any data waiting to be read.
+
+ Polls aserial device to see if there is any data waiting to be read.
+ If there is data waiting to be read from the serial device, then TRUE is returned.
+ If there is no data waiting to be read from the serial device, then FALSE is returned.
+
+ @retval TRUE Data is waiting to be read from the serial device.
+ @retval FALSE There is no data waiting to be read from the serial device.
+
+**/
+BOOLEAN
+EFIAPI
+SerialPortPoll (
+ VOID
+ )
+{
+ STATIC volatile UINT32 * const uart = (UINT32 *)FixedPcdGet32(PcdU5UartBase);
+ UINT32 IP;
+
+ if (Initiated == FALSE) {
+ return FALSE;
+ }
+ IP = MmioRead32 ((UINTN)(uart + UART_REG_IP));
+ if(IP & UART_IP_RXWM) {
+ return TRUE;
+ }
+ else {
+ return FALSE;
+ }
+}
+
+/**
+ Sets the control bits on a serial device.
+
+ @param Control Sets the bits of Control that are settable.
+
+ @retval RETURN_SUCCESS The new control bits were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetControl (
+ IN UINT32 Control
+ )
+{
+ if (Initiated == FALSE) {
+ return EFI_NOT_READY;
+ }
+ return RETURN_SUCCESS;
+}
+
+/**
+ Retrieve the status of the control bits on a serial device.
+
+ @param Control A pointer to return the current control signals from the serial device.
+
+ @retval RETURN_SUCCESS The control bits were read from the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortGetControl (
+ OUT UINT32 *Control
+ )
+{
+ if (Initiated == FALSE) {
+ return EFI_NOT_READY;
+ }
+ *Control = 0;
+ return RETURN_SUCCESS;
+}
+
+/**
+ Sets the baud rate, receive FIFO depth, transmit/receice time out, parity,
+ data bits, and stop bits on a serial device.
+
+ @param BaudRate The requested baud rate. A BaudRate value of 0 will use the
+ device's default interface speed.
+ On output, the value actually set.
+ @param ReveiveFifoDepth The requested depth of the FIFO on the receive side of the
+ serial interface. A ReceiveFifoDepth value of 0 will use
+ the device's default FIFO depth.
+ On output, the value actually set.
+ @param Timeout The requested time out for a single character in microseconds.
+ This timeout applies to both the transmit and receive side of the
+ interface. A Timeout value of 0 will use the device's default time
+ out value.
+ On output, the value actually set.
+ @param Parity The type of parity to use on this serial device. A Parity value of
+ DefaultParity will use the device's default parity value.
+ On output, the value actually set.
+ @param DataBits The number of data bits to use on the serial device. A DataBits
+ vaule of 0 will use the device's default data bit setting.
+ On output, the value actually set.
+ @param StopBits The number of stop bits to use on this serial device. A StopBits
+ value of DefaultStopBits will use the device's default number of
+ stop bits.
+ On output, the value actually set.
+
+ @retval RETURN_SUCCESS The new attributes were set on the serial device.
+ @retval RETURN_UNSUPPORTED The serial device does not support this operation.
+ @retval RETURN_INVALID_PARAMETER One or more of the attributes has an unsupported value.
+ @retval RETURN_DEVICE_ERROR The serial device is not functioning correctly.
+
+**/
+RETURN_STATUS
+EFIAPI
+SerialPortSetAttributes (
+ IN OUT UINT64 *BaudRate,
+ IN OUT UINT32 *ReceiveFifoDepth,
+ IN OUT UINT32 *Timeout,
+ IN OUT EFI_PARITY_TYPE *Parity,
+ IN OUT UINT8 *DataBits,
+ IN OUT EFI_STOP_BITS_TYPE *StopBits
+ )
+{
+ if (Initiated == FALSE) {
+ return EFI_NOT_READY;
+ }
+ return RETURN_SUCCESS;
+}
diff --git a/Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/U5SerialPortLib.uni b/Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/U5SerialPortLib.uni
new file mode 100644
index 0000000..49163bd
--- /dev/null
+++ b/Platform/SiFive/U5SeriesPkg/Library/SerialIoLib/U5SerialPortLib.uni
@@ -0,0 +1,16 @@
+// /** @file
+// Library instance for SerialIo library class
+//
+// Library instance for SerialIO library class.
+//
+// Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
+//
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// **/
+
+
+#string STR_MODULE_ABSTRACT #language en-US "Library instance for SerialIO library class"
+
+#string STR_MODULE_DESCRIPTION #language en-US "Library instance for SerialIO library class."
+
--
2.7.4
next prev parent reply other threads:[~2019-10-28 4:52 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-28 4:20 [platform/devel-riscv-v2 PATCHv5 00/18] Initial version of RISC-V Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 01/18] Silicon/SiFive: Initial version of SiFive silicon package Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 02/18] SiFive/E51: Initial version of SiFive E51 core library Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 03/18] SiFive/U54: Initial version of SiFive U54 " Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 04/18] SiFive/U54MC: Initial version of SiFive U54MC Coreplex library Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 05/18] U5SeriesPkg/PeiCoreInfoHobLib: Library to create core information Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 06/18] U5SeriesPkg/TimerDxe: U5 Series Platform Timer DXE driver Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 07/18] U5SeriesPkg/RamFvbServicesRuntimeDxe: Firmware Volume Block service Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 08/18] U5SeriesPkg/RiscVPlatformTimerLib: Platform Timer library Abner Chang
2019-10-28 4:20 ` Abner Chang [this message]
2019-11-19 15:30 ` [edk2-devel] [platform/devel-riscv-v2 PATCHv5 09/18] U5SeriesPkg/SerialIoLib: Platform Serial Port library Mark Salter
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 10/18] FreedomU540HiFiveUnleashedBoard/PlatformPei:Platform PEI Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 11/18] FreedomU540HiFiveUnleashedBoard/OpensbiPlatformLib:OpenSBI platform lib Abner Chang
2019-11-19 15:30 ` [edk2-devel] " Mark Salter
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 12/18] U5SeriesPkg/FreedomU540HiFiveUnleashedBoard: Add SiFive U540 platform Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 13/18] FreedomU500VC707Board/PlatformPei: Platform initialization PEI module Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 14/18] FreedomU500VC707Board/OpensbiPlatformLib: OpenSBI platform interface Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 15/18] U5SeriesPkg/FreedomU500VC707Board: Add SiFive U500 platform Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 16/18] SiFive/U5SeriesPkg Add U5SeriesPkg Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 17/18] edk2-platforms: Update Readme.md for RISC-V platform Abner Chang
2019-10-28 4:20 ` [platform/devel-riscv-v2 PATCHv5 18/18] edk2-platforms: Update Maintainers file Abner Chang
2019-11-26 15:22 ` [edk2-devel] [platform/devel-riscv-v2 PATCHv5 00/18] Initial version of RISC-V Leif Lindholm
2019-12-22 6:09 ` Abner Chang
[not found] <1572228122-13265-1-git-send-email-abner.chang@hpe.com>
[not found] ` <1572228122-13265-10-git-send-email-abner.chang@hpe.com>
2019-11-26 14:53 ` [platform/devel-riscv-v2 PATCHv5 09/18] U5SeriesPkg/SerialIoLib: Platform Serial Port library Leif Lindholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1572236433-15404-10-git-send-email-abner.chang@hpe.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox