From: Ming Huang <huangming23@huawei.com>
To: <devel@edk2.groups.io>, <leif@nuviainc.com>, <ard.biesheuvel@linaro.org>
Cc: <lidongzhan@huawei.com>, <songdongkuang@huawei.com>,
<wanghuiqiang@huawei.com>, <qiuliangen@huawei.com>
Subject: [RFC edk2-platforms v1 2/2] Silicon/Hisilicon: Add RX8900RealTimeClockLib
Date: Mon, 18 May 2020 21:37:24 +0800 [thread overview]
Message-ID: <1589809044-59210-3-git-send-email-huangming23@huawei.com> (raw)
In-Reply-To: <1589809044-59210-1-git-send-email-huangming23@huawei.com>
There are some boards base on D06, but use RX8900 RTC,
so upstream the RX8900RealTimeClockLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <huangming23@huawei.com>
---
Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClock.h | 41 ++
Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClockLib.c | 468 ++++++++++++++++++++
Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClockLib.inf | 33 ++
3 files changed, 542 insertions(+)
diff --git a/Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClock.h b/Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClock.h
new file mode 100644
index 0000000..6bcef10
--- /dev/null
+++ b/Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClock.h
@@ -0,0 +1,41 @@
+/** @file
+
+ Copyright (c) 2020, Hisilicon Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef __RX8900_REAL_TIME_CLOCK_H__
+#define __RX8900_REAL_TIME_CLOCK_H__
+
+#define RX8900_REGADDR_SECONDS 0x00
+#define RX8900_REGADDR_MIUTES 0x01
+#define RX8900_REGADDR_HOURS 0x02
+#define RX8900_REGADDR_DAY 0x03
+#define RX8900_REGADDR_DATE 0x04
+#define RX8900_REGADDR_MONTH 0x05
+#define RX8900_REGADDR_YEAR 0x06
+#define RX8900_REGADDR_RAM 0x07
+#define RX8900_REGADDR_ALARMMIN 0x08
+#define RX8900_REGADDR_ALARMHOUR 0x09
+#define RX8900_REGADDR_ALARMDAY 0x0A
+#define RX8900_REGADDR_ALARMWEEK 0x0A
+#define RX8900_REGADDR_TIMECOUNTER_0 0x0B
+#define RX8900_REGADDR_TIMECOUNTER_1 0x0C
+#define RX8900_REGADDR_EXTENSIONREG 0x0D
+#define RX8900_REGADDR_FLAGREG 0x0E
+#define RX8900_REGADDR_CONTRLREG 0xF
+#define RX8900_REGADDR_BACKUP_FUN 0x18
+
+#define RX8900_VDETOFF_SWOFF 0x0C
+#define TEMPERATURE_COMPENSATION_2S 0x40
+#define OUTPUT_FREQUENCY_32768 0x0C
+#define FLAG_REG_DEFAULT 0x00
+#define RX8900_RAM_REG_DEFAULT 0x5A
+
+
+#define RTC_DELAY_1000_MACROSECOND 1000
+#define EFI_TIMEOFFSET_TIMEZONE 0x5A0
+
+#endif
diff --git a/Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClockLib.c b/Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClockLib.c
new file mode 100644
index 0000000..bb124fd
--- /dev/null
+++ b/Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClockLib.c
@@ -0,0 +1,468 @@
+/** @file
+
+ Copyright (c) 2020, Hisilicon Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#include <Uefi.h>
+#include <PiDxe.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/DebugLib.h>
+#include <Library/I2CLib.h>
+#include <Library/RtcHelperLib.h>
+#include <Library/TimeBaseLib.h>
+#include <Library/TimerLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/UefiRuntimeLib.h>
+#include <Library/UefiRuntimeServicesTableLib.h>
+#include <Protocol/RealTimeClock.h>
+#include "RX8900RealTimeClock.h"
+
+extern I2C_DEVICE gRtcDevice;
+
+STATIC BOOLEAN mRX8900Initialized = FALSE;
+STATIC CONST CHAR16 mTimeZoneVariableName[] = L"RX8900RtcTimeZone";
+STATIC CONST CHAR16 mDaylightVariableName[] = L"RX8900RtcDaylight";
+
+EFI_STATUS
+InitializeRX8900 (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ unsigned char writeTemp;
+
+ Status = SwitchRtcI2cChannelAndLock ();
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+
+ Status = I2CInit (gRtcDevice.Socket, gRtcDevice.Port, Normal);
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+
+ writeTemp = RX8900_VDETOFF_SWOFF;
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_BACKUP_FUN, 1, &writeTemp);
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+ writeTemp = TEMPERATURE_COMPENSATION_2S;
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_CONTRLREG, 1, &writeTemp);
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+ writeTemp = OUTPUT_FREQUENCY_32768;
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_EXTENSIONREG, 1, &writeTemp);
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+
+ writeTemp = FLAG_REG_DEFAULT;
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_FLAGREG, 1, &writeTemp);
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+ writeTemp = RX8900_RAM_REG_DEFAULT;
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_RAM, 1, &writeTemp);
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+
+ mRX8900Initialized = TRUE;
+
+ EXIT:
+
+ ReleaseOwnershipOfRtc ();
+ return Status;
+}
+
+STATIC
+INT16
+GetTimeZone (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ INT16 TimeZone;
+ UINTN Size;
+
+ TimeZone = EFI_UNSPECIFIED_TIMEZONE;
+ Size = sizeof (TimeZone);
+ Status = EfiGetVariable (
+ (CHAR16 *)mTimeZoneVariableName,
+ &gEfiCallerIdGuid,
+ NULL,
+ &Size,
+ (VOID *)&TimeZone
+ );
+
+ if (EFI_ERROR (Status)) {
+ TimeZone = EFI_UNSPECIFIED_TIMEZONE;
+ // The time zone variable does not exist in non-volatile storage, so create it.
+ Status = EfiSetVariable (
+ (CHAR16 *)mTimeZoneVariableName,
+ &gEfiCallerIdGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ Size,
+ (VOID *)&TimeZone
+ );
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "Failed to save %s variable, Status = %r\n",
+ mTimeZoneVariableName, Status));
+ }
+ } else {
+ // Check TimeZone bounds: -1440 to 1440 or 2047
+ if ((TimeZone < -EFI_TIMEOFFSET_TIMEZONE) || (TimeZone > EFI_TIMEOFFSET_TIMEZONE)) {
+ TimeZone = EFI_UNSPECIFIED_TIMEZONE;
+ }
+ }
+
+ return TimeZone;
+}
+
+STATIC
+UINT8
+GetDayLight (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ UINT8 DayLight;
+ UINTN Size;
+
+ DayLight = 0;
+ // Get the current daylight information from non-volatile storage
+ Size = sizeof (DayLight);
+ Status = EfiGetVariable (
+ (CHAR16 *)mDaylightVariableName,
+ &gEfiCallerIdGuid,
+ NULL,
+ &Size,
+ (VOID *)&DayLight
+ );
+
+ if (EFI_ERROR (Status)) {
+ DayLight = 0;
+ // The daylight variable does not exist in non-volatile storage, so create it.
+ Status = EfiSetVariable (
+ (CHAR16 *)mDaylightVariableName,
+ &gEfiCallerIdGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ Size,
+ (VOID *)&DayLight
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "Failed to save %s variable, Status = %r\n",
+ mDaylightVariableName, Status));
+ }
+ }
+
+ return DayLight;
+}
+
+EFI_STATUS
+EFIAPI
+LibGetTime (
+ OUT EFI_TIME *Time,
+ OUT EFI_TIME_CAPABILITIES *Capabilities
+ )
+{
+ EFI_STATUS Status;
+ UINT8 Temp[7] = {0};
+ UINT16 BaseYear = 2000;
+ UINTN EpochSeconds;
+ UINT8 TryCount = 0;
+
+ // Ensure Time is a valid pointer
+ if (Time == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ // Initialize the hardware if not already done
+ if (!mRX8900Initialized) {
+ Status = InitializeRX8900 ();
+ if (EFI_ERROR (Status)) {
+ return EFI_NOT_READY;
+ }
+ }
+
+ Status = SwitchRtcI2cChannelAndLock ();
+ if (EFI_ERROR (Status)) {
+ ReleaseOwnershipOfRtc ();
+ return Status;
+ }
+
+ do {
+ Status = I2CRead (&gRtcDevice, RX8900_REGADDR_SECONDS, 7, Temp);
+ if (EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ goto Err;
+ }
+
+ Time->Second = BcdToDecimal8 (Temp[0]);
+ Time->Minute = BcdToDecimal8 (Temp[1]);
+ Time->Hour = BcdToDecimal8 (Temp[2]);
+ Time->Day = BcdToDecimal8 (Temp[4]);
+ Time->Month = BcdToDecimal8 (Temp[5]);
+ Time->Year = BaseYear + BcdToDecimal8 (Temp[6]);
+ Time->Nanosecond = 0;
+
+ EpochSeconds = EfiTimeToEpoch (Time);
+
+ Time->TimeZone = GetTimeZone ();
+ // Adjust for the correct time zone
+ if (Time->TimeZone != EFI_UNSPECIFIED_TIMEZONE) {
+ EpochSeconds += Time->TimeZone * SEC_PER_MIN;
+ }
+
+ Time->Daylight = GetDayLight ();
+ // Adjust for the correct period
+ if ((Time->Daylight & EFI_TIME_IN_DAYLIGHT) == EFI_TIME_IN_DAYLIGHT) {
+ // Convert to adjusted time, i.e. spring forwards one hour
+ EpochSeconds += SEC_PER_HOUR;
+ }
+
+ // Convert from internal 32-bit time to UEFI time
+ EpochToEfiTime (EpochSeconds, Time);
+ if ((!IsTimeValid (Time)) || ((Time->Year - BaseYear) > 99) || (Time->Year < 2000)) {
+ DEBUG ((DEBUG_INFO, "LibGetTime: %d-%d-%d %d-%d-%d EpochSeconds:%llx is invalid time!\n",
+ Time->Second, Time->Minute, Time->Hour, Time->Day, Time->Month,
+ Time->Year, EpochSeconds));
+ Status = EFI_DEVICE_ERROR;
+ }
+
+Err:
+ TryCount++;
+ } while ((TryCount < 3) && (EFI_ERROR (Status)));
+
+ ReleaseOwnershipOfRtc ();
+ return Status;
+}
+
+STATIC
+EFI_STATUS
+SetTimeToRX8900 (
+ IN EFI_TIME *Time
+ )
+{
+ EFI_STATUS Status;
+ UINT8 Temp;
+
+ (VOID)MicroSecondDelay (RTC_DELAY_1000_MACROSECOND);
+ Temp = DecimalToBcd8 (Time->Second);
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_SECONDS, 1, &Temp);
+ if(EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ return Status;
+ }
+
+ Temp = DecimalToBcd8 (Time->Minute);
+ (VOID)MicroSecondDelay (RTC_DELAY_1000_MACROSECOND);
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_MIUTES, 1, &Temp);
+ if(EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ return Status;
+ }
+
+ Temp = DecimalToBcd8 (Time->Hour);
+ (VOID)MicroSecondDelay (RTC_DELAY_1000_MACROSECOND);
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_HOURS, 1, &Temp);
+ if(EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ return Status;
+ }
+
+ Temp = DecimalToBcd8 (Time->Day);
+ (VOID)MicroSecondDelay (RTC_DELAY_1000_MACROSECOND);
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_DATE, 1, &Temp);
+ if(EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ return Status;
+ }
+
+ Temp = DecimalToBcd8 (Time->Month);
+ (VOID)MicroSecondDelay (RTC_DELAY_1000_MACROSECOND);
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_MONTH, 1, &Temp);
+ if(EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ return Status;
+ }
+
+ Time->Year= Time->Year % 100;
+ Temp = Time->Year;
+ Temp = DecimalToBcd8 (Temp);
+ (VOID)MicroSecondDelay (RTC_DELAY_1000_MACROSECOND);
+ Status = I2CWrite (&gRtcDevice, RX8900_REGADDR_YEAR, 1, &Temp);
+ if(EFI_ERROR (Status)) {
+ Status = EFI_DEVICE_ERROR;
+ return Status;
+ }
+
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+LibSetTime (
+ IN EFI_TIME *Time
+ )
+{
+ EFI_STATUS Status;
+ UINTN EpochSeconds;
+
+ // Initialize the hardware if not already done
+ if (!mRX8900Initialized) {
+ Status = InitializeRX8900 ();
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+ }
+
+ Status = SwitchRtcI2cChannelAndLock ();
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+
+ if(!IsTimeValid(Time)){
+ return EFI_INVALID_PARAMETER;
+ }
+
+ EpochSeconds = EfiTimeToEpoch (Time);
+
+ // Adjust for the correct time zone, i.e. convert to UTC time zone
+ if (Time->TimeZone != EFI_UNSPECIFIED_TIMEZONE) {
+ EpochSeconds -= Time->TimeZone * SEC_PER_MIN;
+ }
+
+ // Adjust for the correct period
+ if ((Time->Daylight & EFI_TIME_IN_DAYLIGHT) == EFI_TIME_IN_DAYLIGHT) {
+ // Convert to un-adjusted time, i.e. fall back one hour
+ EpochSeconds -= SEC_PER_HOUR;
+ }
+
+ EpochToEfiTime (EpochSeconds, Time);
+ Status = SetTimeToRX8900 (Time);
+ if (EFI_ERROR (Status)) {
+ goto EXIT;
+ }
+
+ // Save the current time zone information into non-volatile storage
+ Status = EfiSetVariable (
+ (CHAR16 *)mTimeZoneVariableName,
+ &gEfiCallerIdGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ sizeof (Time->TimeZone),
+ (VOID *)&(Time->TimeZone)
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "LibSetTime: Failed to save %s variable, Status = %r\n",
+ mTimeZoneVariableName, Status));
+ goto EXIT;
+ }
+
+ // Save the current daylight information into non-volatile storage
+ Status = EfiSetVariable (
+ (CHAR16 *)mDaylightVariableName,
+ &gEfiCallerIdGuid,
+ EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
+ sizeof(Time->Daylight),
+ (VOID *)&(Time->Daylight)
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_INFO, "LibSetTime: Failed to save %s variable, Status = %r\n",
+ mDaylightVariableName, Status));
+ goto EXIT;
+ }
+
+ EXIT:
+ ReleaseOwnershipOfRtc ();
+ return Status;
+}
+
+EFI_STATUS
+EFIAPI
+LibGetWakeupTime (
+ OUT BOOLEAN *Enabled,
+ OUT BOOLEAN *Pending,
+ OUT EFI_TIME *Time
+ )
+{
+ // Not a required feature
+ return EFI_UNSUPPORTED;
+}
+
+EFI_STATUS
+EFIAPI
+LibSetWakeupTime (
+ IN BOOLEAN Enabled,
+ OUT EFI_TIME *Time
+ )
+{
+ // Not a required feature
+ return EFI_UNSUPPORTED;
+}
+
+
+EFI_STATUS
+EFIAPI
+LibRtcInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+ EFI_TIME EfiTime;
+
+ // Setup the setters and getters
+ gRT->GetTime = LibGetTime;
+ gRT->SetTime = LibSetTime;
+ gRT->GetWakeupTime = LibGetWakeupTime;
+ gRT->SetWakeupTime = LibSetWakeupTime;
+
+ Status = gRT->GetTime (&EfiTime, NULL);
+ if (EFI_ERROR (Status) || (EfiTime.Year < 2000) || (EfiTime.Year > 2099) ||
+ (!IsTimeValid (&EfiTime))) {
+ EfiTime.Year = 2000;
+ EfiTime.Month = 1;
+ EfiTime.Day = 1;
+ EfiTime.Hour = 0;
+ EfiTime.Minute = 0;
+ EfiTime.Second = 0;
+ EfiTime.Nanosecond = 0;
+ EfiTime.Daylight = 0;
+ EfiTime.TimeZone = EFI_UNSPECIFIED_TIMEZONE;
+
+ Status = gRT->SetTime (&EfiTime);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_ERROR, "SetTime Status : %r\n", Status));
+ }
+ }
+
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Handle,
+ &gEfiRealTimeClockArchProtocolGuid,
+ NULL,
+ NULL
+ );
+
+ return Status;
+}
+
+
+VOID
+EFIAPI
+LibRtcVirtualNotifyEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ return;
+}
diff --git a/Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClockLib.inf b/Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClockLib.inf
new file mode 100644
index 0000000..aa07a06
--- /dev/null
+++ b/Silicon/Hisilicon/Library/RX8900RealTimeClockLib/RX8900RealTimeClockLib.inf
@@ -0,0 +1,33 @@
+/** @file
+
+ Copyright (c) 2020, Hisilicon Limited. All rights reserved.<BR>
+
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = RX8900RealTimeClockLib
+ FILE_GUID = 55BBD010-EA76-4836-8FEA-99CBAA6664F4
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = RealTimeClockLib
+
+[Sources.common]
+ RX8900RealTimeClockLib.c
+
+[Packages]
+ EmbeddedPkg/EmbeddedPkg.dec
+ MdePkg/MdePkg.dec
+ Silicon/Hisilicon/HisiPkg.dec
+
+[LibraryClasses]
+ DebugLib
+ I2CLib
+ IoLib
+ RtcHelperLib
+ TimeBaseLib
+ TimerLib
+ UefiLib
+ UefiRuntimeLib
--
2.8.1
next prev parent reply other threads:[~2020-05-18 13:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-18 13:37 [RFC edk2-platforms v1 0/2] Improve D0x Ming Huang
2020-05-18 13:37 ` [RFC edk2-platforms v1 1/2] Hisilicon/Library: Move two functions to RtcHelperLib Ming Huang
2020-05-18 18:03 ` Leif Lindholm
2020-05-19 10:28 ` Ming Huang
2020-05-18 13:37 ` Ming Huang [this message]
2020-05-18 18:13 ` [RFC edk2-platforms v1 2/2] Silicon/Hisilicon: Add RX8900RealTimeClockLib Leif Lindholm
2020-05-19 10:30 ` Ming Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1589809044-59210-3-git-send-email-huangming23@huawei.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox