* [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
@ 2017-11-17 23:07 Supreeth Venkatesh
2017-11-17 23:08 ` [RFC v1 13/15] StandaloneMmPkg/Core: Implementation of Standalone MM Core Module Supreeth Venkatesh
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Supreeth Venkatesh @ 2017-11-17 23:07 UTC (permalink / raw)
To: edk2-devel; +Cc: leif.lindholm, jiewen.yao, Supreeth Venkatesh
***
PI Specification v1.5 "Volume 4: Management Mode Core Interface"
introduces the concept of MM Standalone Mode. Initialization of this mode
can be done during the SEC phase (Section 1.5.2).
On ARMv8-A systems, ARM Trusted Firmware is responsible for launching
the normal world firmware e.g. UEFI.
The Standalone MM environment is instantiated in Secure EL0 as a separate
firmware volume. It executes as BL32 Image under control of ARM TF
which is instantiated in EL3. Both components execute in the AArch64 execution state.
This patchset will build upon the StandaloneSmmPkg module originally
contributed by Intel.
This package can be used in conjunction with ARM Trusted Firmware
to recreate a simple MM secure environment that demonstrates communication
between two UEFI images where one is executing in the normal world and the other is
executing in the secure world.
The normal world image includes:
MM Communication DXE runtime driver that implements the protocol for communication
with the MM environment in the secure world.
The secure world image includes:
The MM Standalone framework.
This RFC patchset includes the proposed organization/structure and
has architecture agnostic core changes only as a first pass.
Once the organization/structure have been agreed upon, patchset for
supporting libraries and AARCH64 implementation will be sent.
Steps to build MM Standalone images
In user preferred "work" directory, execute the following shell commands
git clone https://github.com/tianocore/edk2.git
git checkout master
git clone https://github.com/tianocore/edk2-platforms.git
git checkout master
mkdir arm-tf
cd arm-tf
git clone https://github.com/ARM-software/arm-trusted-firmware.git .
git checkout master
cd ..
git clone https://git.linaro.org/uefi/uefi-tools.git .
git checkout master
The following will build the MM Standalone image which runs in secure world.
./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
The follwing will build the normal world UEFI image, ARM Trusted Firmware and
a Firmware Image Package (FIP) that includes both the UEFI images.
./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware image package (fip) binary will be generated at:
Build Output
Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
Steps to run MM Standalone image
1. Download the ARMv8 Architecture FVP from
https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
For more information, please refer
https://developer.arm.com/products/system-design/fixed-virtual-platforms
2. Install FVP into preferred "work" directory.
3. Create a shell script "run_mm.sh" in the same folder where "FVP_Base_AEMv8A-AEMv8A" is present.
Sample Shell script below:
./FVP_Base_AEMv8A-AEMv8A
-C cache_state_modelled=0
-C bp.secure_memory=1
-C bp.tzc_400.diagnostics=1
-C bp.pl011_uart0.untimed_fifos=0
-C cluster1.NUM_CORES=4
-C cluster0.NUM_CORES=4
-C bp.pl011_uart0.out_file=uart0.output
-C bp.pl011_uart1.out_file=uart1.output
-C bp.pl011_uart2.out_file=uart2.output
-C bp.pl011_uart3.out_file=uart3.output
-C bp.secureflashloader.fname=""
-C bp.flashloader0.fname=""
-S -R
4. ./run_mm.sh
5. Output can be seen on FVP console.
6. The normal world will boot to the UEFI shell.
Sample Output
MM Standalone Output (FVP UART2)
SPM Version: Major=0x0, Minor=0x1
NumSpMemRegions - 0x6
SpMemBase - 0xFF200000
SpMemLimit - 0x100000000
SpImageBase - 0xFF200000
SpStackBase - 0xFF610000
SpHeapBase - 0xFF620000
SpNsCommBufBase - 0xFF600000
SpSharedBufBase - 0xFF500000
SpImageSize - 0x300000
SpPcpuStackSize - 0x2000
SpHeapSize - 0x9E0000
SpNsCommBufSize - 0x10000
SpPcpuSharedBufSize - 0x20000
NumCpus - 0x8
CpuInfo - 0xFF500680
Mpidr - 0x80000000
LinearId - 0x0
Flags - 0x1
Mpidr - 0x80000001
LinearId - 0x1
Flags - 0x0
Mpidr - 0x80000002
LinearId - 0x2
Flags - 0x0
Mpidr - 0x80000003
LinearId - 0x3
Flags - 0x0
Mpidr - 0x80000100
LinearId - 0x4
Flags - 0x0
Mpidr - 0x80000101
LinearId - 0x5
Flags - 0x0
Mpidr - 0x80000102
LinearId - 0x6
Flags - 0x0
Mpidr - 0x80000103
LinearId - 0x7
Flags - 0x0
Found Standalone MM PE data - 0xFF201000
Found Standalone MM PE data - 0xFF201000
Standalone MM Core PE-COFF SectionHeaderOffset - 0xF60, NumberOfSections - 3
UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0x60000020 permissions
UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has .et name
UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0xFF202000 address
UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0x1000 data
UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image at 0xFF201000 with 0x60000020 permissions
UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0xC0000040 permissions
UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has .aa name
UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0xFF217000 address
UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0x16000 data
UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at 0xFF201000 with RW-XN permissions
UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0x42000040 permissions
UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has .eo name
UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0xFF218000 address
UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0x17000 data
UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at 0xFF201000 with RO-XN permissions
StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
MmramRangeCount - 0x6
MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
MmInitializeMemoryServices
MmAddMemoryRegion 0 : 0x00000000FF200000 - 0x0000000000300000
MmAddMemoryRegion 1 : 0x00000000FF500000 - 0x0000000000100000
MmAddMemoryRegion 2 : 0x00000000FF600000 - 0x0000000000010000
MmAddMemoryRegion 3 : 0x00000000FF610000 - 0x0000000000010000
MmAddMemoryRegion 4 : 0x00000000FF620000 - 0x00000000000002C8
MmAddMemoryRegion 5 : 0x00000000FF6202C8 - 0x00000000009DFD38
mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF
MmMain - 0xFF620000
MmramRangeCount - 0x6
MmramRanges[0]: 0x00000000FF200000 - 0x300000
MmramRanges[1]: 0x00000000FF500000 - 0x100000
MmramRanges[2]: 0x00000000FF600000 - 0x10000
MmramRanges[3]: 0x00000000FF610000 - 0x10000
MmramRanges[4]: 0x00000000FF620000 - 0x2C8
MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38
mMmramRangeCount - 0x6
mMmramRanges - 0xFFFFEE10
BFV address - 0xFF200000
BFV size - 0x300000
MmInstallConfigurationTable For HobList
HobSize - 0x2C8
MmHobStart - 0xFFFFE810
MmRegisterProtocolNotify - MmConfigurationMmProtocol
Mm Dispatch StandaloneBfvAddress - 0xFF200000
MmCoreFfsFindMmDriver - 0xFF200000
FvIsBeingProcesssed - 0xFF200000
Check MmFileTypes - 0xA
Check MmFileTypes - 0xE
Find PE data - 0xFF219024
MmAddToDriverList - 58F7A62B-6280-42A7-BC38-10535A64A92C (0xFF219024)
MmDispatcher
Drain the Scheduled Queue
Search DriverList for items to place on Scheduled Queue
DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
TRUE
END
RESULT = TRUE
Drain the Scheduled Queue
DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-XN permissions and size 0x7000
UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-X permissions and size 0x7000
UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000 with RW-XN permissions and size 0x1000
UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000 with RO-XN permissions and size 0x1000
add-symbol-file /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5/AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000
Loading MM driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000 PiMmStandloneArmTfCpuDriver.efi
StartImage - 0xFFFE7000 (Standalone Mode)
MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7 FFFEE008
MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) - FFFEE008
MM Core registered MM Entry Point address FF2041C0
MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569 FFFEE018
Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
mNsCommBuffer.PhysicalStart - 0xFF600000
mNsCommBuffer.PhysicalSize - 0x10000
mNsCommBuffer: 0x00000000FF600000 - 0x10000
mMpInformationHobData: 0x0000000000000008 - 0x8
mMpInformationHobData[0x80000000]: 0, 0, 0
mMpInformationHobData[0x80000001]: 0, 1, 1
mMpInformationHobData[0x80000002]: 0, 2, 2
mMpInformationHobData[0x80000003]: 0, 3, 3
mMpInformationHobData[0x80000100]: 1, 0, 0
mMpInformationHobData[0x80000101]: 1, 1, 1
mMpInformationHobData[0x80000102]: 1, 2, 2
mMpInformationHobData[0x80000103]: 1, 3, 3
MmiHandlerRegister - GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF - Status 0
MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 - Status 0
MmiHandlerRegister - GUID 60FF8964-E906-41D0-AFED-F241E974E08E - Status 0
MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 - Status 0
MmiHandlerRegister - GUID 2A571201-4966-47F6-8B86-F31E41F32F10 - Status 0
MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF - Status 0
MmiHandlerRegister - GUID 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B - Status 0
MmMain Done!
Shared Cpu Driver EP 0xFFFE798C
ARM TF (FVP UART0)
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
NOTICE: BL1: Built : 16:14:26, Nov 1 2017
INFO: BL1: RAM 0x4036000 - 0x403c000
INFO: BL1: Loading BL2
INFO: Loading image id=1 at address 0x4027000
INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
NOTICE: BL1: Booting BL2
INFO: Entry point address = 0x4027000
INFO: SPSR = 0x3c5
NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
NOTICE: BL2: Built : 16:14:26, Nov 1 2017
INFO: BL2: Doing platform setup
INFO: Configuring TrustZone Controller
INFO: BL2: Loading image id 3
INFO: Loading image id=3 at address 0xff000000
INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
INFO: BL2: Loading image id 4
INFO: Loading image id=4 at address 0xff200000
INFO: Image id=4 loaded: 0xff200000 - 0xff480000
INFO: BL2: Loading image id 5
INFO: Loading image id=5 at address 0x88000000
INFO: Image id=5 loaded: 0x88000000 - 0x88280000
NOTICE: BL1: Booting BL31
INFO: Entry point address = 0xff000000
INFO: SPSR = 0x3cd
NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
NOTICE: BL31: Built : 16:14:26, Nov 1 2017
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xff217000
NOTICE: Number of pages: 1 (4096 bytes)
NOTICE: Attributes : 0x7
NOTICE: (Equivalent TF attributes: 0x22)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xff217000
NOTICE: Number of pages: 1 (4096 bytes)
NOTICE: Attributes : 0x5
NOTICE: (Equivalent TF attributes: 0x2a)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xff218000
NOTICE: Number of pages: 1 (4096 bytes)
NOTICE: Attributes : 0x7
NOTICE: (Equivalent TF attributes: 0x22)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xfffe7000
NOTICE: Number of pages: 7 (28672 bytes)
NOTICE: Attributes : 0x7
NOTICE: (Equivalent TF attributes: 0x22)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xfffe7000
NOTICE: Number of pages: 7 (28672 bytes)
NOTICE: Attributes : 0x3
NOTICE: (Equivalent TF attributes: 0x2)
NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
NOTICE: Start address : 0xfffef000
NOTICE: Number of pages: 1 (4096 bytes)
NOTICE: Attributes : 0x7
NOTICE: (Equivalent TF attributes: 0x22)
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x88000000
INFO: SPSR = 0x3c9
UEFI firmware (version built at 16:14:14 on Nov 1 2017)
***
Supreeth Venkatesh (15):
ArmPkg/Include: Add MM interface SVC return codes.
BaseTools/AutoGen: Update header file for MM modules.
ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
MdePkg/Include: Add management mode FV file type and depex.
StandaloneMmPkg/StandaloneMmCoreEntryPoint: Add an AArch64 specific
entry point library.
StandaloneMmPkg/HobLib: Add a common HOB Library for management mode.
StandaloneMmPkg/FvLib: Add a common FV Library for management mode.
StandaloneMmPkg/MemLib: Instance of management mode memory check
library.
StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library.
StandaloneMmPkg/StandaloneMmDriverEntryPoint: MM driver entry point
library.
StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Standard
Platforms.
StandaloneMmPkg/Core: Implementation of Standalone MM Core Module.
StandaloneMmPkg: Describe the package declaration, definition and fdf
files.
ArmPkg/DebugPeCoffExtraActionLib: Add UpdatePeCoffPermissions for
S-ELO MM.
ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146 +++
ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
.../DebugPeCoffExtraActionLib.c | 167 ++-
.../DebugPeCoffExtraActionLib.inf | 7 +
BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
MdePkg/Include/Pi/PiFirmwareFile.h | 4 +
StandaloneMmPkg/Core/Dependency.c | 389 +++++++
StandaloneMmPkg/Core/Dispatcher.c | 1071 ++++++++++++++++++++
StandaloneMmPkg/Core/FwVol.c | 104 ++
StandaloneMmPkg/Core/Handle.c | 533 ++++++++++
StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
StandaloneMmPkg/Core/Locate.c | 496 +++++++++
StandaloneMmPkg/Core/Mmi.c | 337 ++++++
StandaloneMmPkg/Core/Notify.c | 203 ++++
StandaloneMmPkg/Core/Page.c | 384 +++++++
StandaloneMmPkg/Core/Pool.c | 287 ++++++
StandaloneMmPkg/Core/StandaloneMmCore.c | 708 +++++++++++++
StandaloneMmPkg/Core/StandaloneMmCore.h | 903 +++++++++++++++++
StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231 +++++
StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 225 ++++
.../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
.../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
StandaloneMmPkg/Include/Guid/MmCoreData.h | 132 +++
StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
.../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
.../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
.../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
StandaloneMmPkg/Include/StandaloneMm.h | 36 +
StandaloneMmPkg/Library/FvLib/FvLib.c | 366 +++++++
StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
StandaloneMmPkg/Library/HobLib/HobLib.c | 697 +++++++++++++
StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
StandaloneMmPkg/Library/MemLib/MemLib.c | 276 +++++
StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
.../MemoryAllocationLib/MemoryAllocationLib.c | 901 ++++++++++++++++
.../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
.../MemoryAllocationLib/MemoryAllocationServices.h | 117 +++
.../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
.../Arm/SetPermissions.c | 278 +++++
.../Arm/StandaloneMmCoreEntryPoint.c | 265 +++++
.../StandaloneMmCoreEntryPoint.inf | 53 +
.../StandaloneMmDriverEntryPoint.c | 102 ++
.../StandaloneMmDriverEntryPoint.inf | 41 +
StandaloneMmPkg/StandaloneMmPkg.dec | 47 +
StandaloneMmPkg/StandaloneMmPkg.dsc | 132 +++
StandaloneMmPkg/StandaloneMmPkg.fdf | 184 ++++
55 files changed, 11699 insertions(+), 11 deletions(-)
create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
create mode 100644 StandaloneMmPkg/Core/Dependency.c
create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
create mode 100644 StandaloneMmPkg/Core/FwVol.c
create mode 100644 StandaloneMmPkg/Core/Handle.c
create mode 100644 StandaloneMmPkg/Core/InstallConfigurationTable.c
create mode 100644 StandaloneMmPkg/Core/Locate.c
create mode 100644 StandaloneMmPkg/Core/Mmi.c
create mode 100644 StandaloneMmPkg/Core/Notify.c
create mode 100644 StandaloneMmPkg/Core/Page.c
create mode 100644 StandaloneMmPkg/Core/Pool.c
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
create mode 100644 StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
create mode 100644 StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
create mode 100644 StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
create mode 100644 StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.c
create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.c
create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
create mode 100644 StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
create mode 100644 StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.inf
create mode 100644 StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationServices.h
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobList.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissions.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMmCoreEntryPoint.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
create mode 100644 StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.c
create mode 100644 StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
--
2.14.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* [RFC v1 13/15] StandaloneMmPkg/Core: Implementation of Standalone MM Core Module.
2017-11-17 23:07 [RFC v1 00/15] *** Proposal for StandaloneMmPkg *** Supreeth Venkatesh
@ 2017-11-17 23:08 ` Supreeth Venkatesh
2017-11-18 20:10 ` [RFC v1 00/15] *** Proposal for StandaloneMmPkg *** Rebecca Cran
2017-11-28 7:00 ` Yao, Jiewen
2 siblings, 0 replies; 10+ messages in thread
From: Supreeth Venkatesh @ 2017-11-17 23:08 UTC (permalink / raw)
To: edk2-devel; +Cc: leif.lindholm, jiewen.yao, Supreeth Venkatesh, Achin Gupta
Management Mode (MM) is a generic term used to describe a secure
execution environment provided by the CPU and related silicon that is
entered when the CPU detects a MMI. For x86 systems, this can be
implemented with System Management Mode (SMM). For ARM systems, this can
be implemented with TrustZone (TZ).
A MMI can be a CPU instruction or interrupt. Upon detection of a MMI, a
CPU will jump to the MM Entry Point and save some portion of its state
(the "save state") such that execution can be resumed.
The MMI can be generated synchronously by software or asynchronously by
a hardware event. Each MMI source can be detected, cleared and disabled.
Some systems provide for special memory (Management Mode RAM or MMRAM)
which is set aside for software running in MM. Usually the MMRAM is
hidden during normal CPU execution, but this is not required. Usually,
after MMRAM is hidden it cannot be exposed until the next system reset.
The MM Core Interface Specification describes three pieces of the PI
Management Mode architecture:
1. MM Dispatch
During DXE, the DXE Foundation works with the MM Foundation to
schedule MM drivers for execution in the discovered firmware volumes.
2. MM Initialization
MM related code opens MMRAM, creates the MMRAM memory map, and
launches the MM Foundation, which provides the necessary services to
launch MM-related drivers. Then, sometime before boot, MMRAM is
closed and locked. This piece may be completed during the
SEC, PEI or DXE phases.
3. MMI Management
When an MMI generated, the MM environment is created and then the MMI
sources are detected and MMI handlers called.
This patch implements the MM Core.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
---
StandaloneMmPkg/Core/Dependency.c | 389 +++++++
StandaloneMmPkg/Core/Dispatcher.c | 1071 ++++++++++++++++++++
StandaloneMmPkg/Core/FwVol.c | 104 ++
StandaloneMmPkg/Core/Handle.c | 533 ++++++++++
StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
StandaloneMmPkg/Core/Locate.c | 496 +++++++++
StandaloneMmPkg/Core/Mmi.c | 337 ++++++
StandaloneMmPkg/Core/Notify.c | 203 ++++
StandaloneMmPkg/Core/Page.c | 384 +++++++
StandaloneMmPkg/Core/Pool.c | 287 ++++++
StandaloneMmPkg/Core/StandaloneMmCore.c | 708 +++++++++++++
StandaloneMmPkg/Core/StandaloneMmCore.h | 903 +++++++++++++++++
StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
StandaloneMmPkg/Include/StandaloneMm.h | 36 +
16 files changed, 5813 insertions(+)
create mode 100644 StandaloneMmPkg/Core/Dependency.c
create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
create mode 100644 StandaloneMmPkg/Core/FwVol.c
create mode 100644 StandaloneMmPkg/Core/Handle.c
create mode 100644 StandaloneMmPkg/Core/InstallConfigurationTable.c
create mode 100644 StandaloneMmPkg/Core/Locate.c
create mode 100644 StandaloneMmPkg/Core/Mmi.c
create mode 100644 StandaloneMmPkg/Core/Notify.c
create mode 100644 StandaloneMmPkg/Core/Page.c
create mode 100644 StandaloneMmPkg/Core/Pool.c
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
create mode 100644 StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
diff --git a/StandaloneMmPkg/Core/Dependency.c b/StandaloneMmPkg/Core/Dependency.c
new file mode 100644
index 0000000000..e501369130
--- /dev/null
+++ b/StandaloneMmPkg/Core/Dependency.c
@@ -0,0 +1,389 @@
+/** @file
+ MM Driver Dispatcher Dependency Evaluator
+
+ This routine evaluates a dependency expression (DEPENDENCY_EXPRESSION) to determine
+ if a driver can be scheduled for execution. The criteria for
+ schedulability is that the dependency expression is satisfied.
+
+ Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+///
+/// EFI_DEP_REPLACE_TRUE - Used to dynamically patch the dependency expression
+/// to save time. A EFI_DEP_PUSH is evaluated one an
+/// replaced with EFI_DEP_REPLACE_TRUE. If PI spec's Vol 2
+/// Driver Execution Environment Core Interface use 0xff
+/// as new DEPEX opcode. EFI_DEP_REPLACE_TRUE should be
+/// defined to a new value that is not conflicting with PI spec.
+///
+#define EFI_DEP_REPLACE_TRUE 0xff
+
+///
+/// Define the initial size of the dependency expression evaluation stack
+///
+#define DEPEX_STACK_SIZE_INCREMENT 0x1000
+
+//
+// Global stack used to evaluate dependency expressions
+//
+BOOLEAN *mDepexEvaluationStack = NULL;
+BOOLEAN *mDepexEvaluationStackEnd = NULL;
+BOOLEAN *mDepexEvaluationStackPointer = NULL;
+
+/**
+ Grow size of the Depex stack
+
+ @retval EFI_SUCCESS Stack successfully growed.
+ @retval EFI_OUT_OF_RESOURCES There is not enough system memory to grow the stack.
+
+**/
+EFI_STATUS
+GrowDepexStack (
+ VOID
+ )
+{
+ BOOLEAN *NewStack;
+ UINTN Size;
+
+ Size = DEPEX_STACK_SIZE_INCREMENT;
+ if (mDepexEvaluationStack != NULL) {
+ Size = Size + (mDepexEvaluationStackEnd - mDepexEvaluationStack);
+ }
+
+ NewStack = AllocatePool (Size * sizeof (BOOLEAN));
+ if (NewStack == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ if (mDepexEvaluationStack != NULL) {
+ //
+ // Copy to Old Stack to the New Stack
+ //
+ CopyMem (
+ NewStack,
+ mDepexEvaluationStack,
+ (mDepexEvaluationStackEnd - mDepexEvaluationStack) * sizeof (BOOLEAN)
+ );
+
+ //
+ // Free The Old Stack
+ //
+ FreePool (mDepexEvaluationStack);
+ }
+
+ //
+ // Make the Stack pointer point to the old data in the new stack
+ //
+ mDepexEvaluationStackPointer = NewStack + (mDepexEvaluationStackPointer - mDepexEvaluationStack);
+ mDepexEvaluationStack = NewStack;
+ mDepexEvaluationStackEnd = NewStack + Size;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Push an element onto the Boolean Stack.
+
+ @param Value BOOLEAN to push.
+
+ @retval EFI_SUCCESS The value was pushed onto the stack.
+ @retval EFI_OUT_OF_RESOURCES There is not enough system memory to grow the stack.
+
+**/
+EFI_STATUS
+PushBool (
+ IN BOOLEAN Value
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Check for a stack overflow condition
+ //
+ if (mDepexEvaluationStackPointer == mDepexEvaluationStackEnd) {
+ //
+ // Grow the stack
+ //
+ Status = GrowDepexStack ();
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+ }
+
+ //
+ // Push the item onto the stack
+ //
+ *mDepexEvaluationStackPointer = Value;
+ mDepexEvaluationStackPointer++;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Pop an element from the Boolean stack.
+
+ @param Value BOOLEAN to pop.
+
+ @retval EFI_SUCCESS The value was popped onto the stack.
+ @retval EFI_ACCESS_DENIED The pop operation underflowed the stack.
+
+**/
+EFI_STATUS
+PopBool (
+ OUT BOOLEAN *Value
+ )
+{
+ //
+ // Check for a stack underflow condition
+ //
+ if (mDepexEvaluationStackPointer == mDepexEvaluationStack) {
+ return EFI_ACCESS_DENIED;
+ }
+
+ //
+ // Pop the item off the stack
+ //
+ mDepexEvaluationStackPointer--;
+ *Value = *mDepexEvaluationStackPointer;
+ return EFI_SUCCESS;
+}
+
+/**
+ This is the POSTFIX version of the dependency evaluator. This code does
+ not need to handle Before or After, as it is not valid to call this
+ routine in this case. POSTFIX means all the math is done on top of the stack.
+
+ @param DriverEntry DriverEntry element to update.
+
+ @retval TRUE If driver is ready to run.
+ @retval FALSE If driver is not ready to run or some fatal error
+ was found.
+
+**/
+BOOLEAN
+MmIsSchedulable (
+ IN EFI_MM_DRIVER_ENTRY *DriverEntry
+ )
+{
+ EFI_STATUS Status;
+ UINT8 *Iterator;
+ BOOLEAN Operator;
+ BOOLEAN Operator2;
+ EFI_GUID DriverGuid;
+ VOID *Interface;
+
+ Operator = FALSE;
+ Operator2 = FALSE;
+
+ if (DriverEntry->After || DriverEntry->Before) {
+ //
+ // If Before or After Depex skip as MmInsertOnScheduledQueueWhileProcessingBeforeAndAfter ()
+ // processes them.
+ //
+ return FALSE;
+ }
+
+ DEBUG ((DEBUG_DISPATCH, "Evaluate MM DEPEX for FFS(%g)\n", &DriverEntry->FileName));
+
+ if (DriverEntry->Depex == NULL) {
+ //
+ // A NULL Depex means that the MM driver is not built correctly.
+ // All MM drivers must have a valid depex expressiion.
+ //
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Depex is empty)\n"));
+ ASSERT (FALSE);
+ return FALSE;
+ }
+
+ //
+ // Clean out memory leaks in Depex Boolean stack. Leaks are only caused by
+ // incorrectly formed DEPEX expressions
+ //
+ mDepexEvaluationStackPointer = mDepexEvaluationStack;
+
+
+ Iterator = DriverEntry->Depex;
+
+ while (TRUE) {
+ //
+ // Check to see if we are attempting to fetch dependency expression instructions
+ // past the end of the dependency expression.
+ //
+ if (((UINTN)Iterator - (UINTN)DriverEntry->Depex) >= DriverEntry->DepexSize) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Attempt to fetch past end of depex)\n"));
+ return FALSE;
+ }
+
+ //
+ // Look at the opcode of the dependency expression instruction.
+ //
+ switch (*Iterator) {
+ case EFI_DEP_BEFORE:
+ case EFI_DEP_AFTER:
+ //
+ // For a well-formed Dependency Expression, the code should never get here.
+ // The BEFORE and AFTER are processed prior to this routine's invocation.
+ // If the code flow arrives at this point, there was a BEFORE or AFTER
+ // that were not the first opcodes.
+ //
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected BEFORE or AFTER opcode)\n"));
+ ASSERT (FALSE);
+
+ case EFI_DEP_PUSH:
+ //
+ // Push operator is followed by a GUID. Test to see if the GUID protocol
+ // is installed and push the boolean result on the stack.
+ //
+ CopyMem (&DriverGuid, Iterator + 1, sizeof (EFI_GUID));
+
+ Status = MmLocateProtocol (&DriverGuid, NULL, &Interface);
+ if (EFI_ERROR (Status) && (mEfiSystemTable != NULL)) {
+ //
+ // For MM Driver, it may depend on uefi protocols
+ //
+ Status = mEfiSystemTable->BootServices->LocateProtocol (&DriverGuid, NULL, &Interface);
+ }
+
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " PUSH GUID(%g) = FALSE\n", &DriverGuid));
+ Status = PushBool (FALSE);
+ } else {
+ DEBUG ((DEBUG_DISPATCH, " PUSH GUID(%g) = TRUE\n", &DriverGuid));
+ *Iterator = EFI_DEP_REPLACE_TRUE;
+ Status = PushBool (TRUE);
+ }
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+
+ Iterator += sizeof (EFI_GUID);
+ break;
+
+ case EFI_DEP_AND:
+ DEBUG ((DEBUG_DISPATCH, " AND\n"));
+ Status = PopBool (&Operator);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+
+ Status = PopBool (&Operator2);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+
+ Status = PushBool ((BOOLEAN)(Operator && Operator2));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+ break;
+
+ case EFI_DEP_OR:
+ DEBUG ((DEBUG_DISPATCH, " OR\n"));
+ Status = PopBool (&Operator);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+
+ Status = PopBool (&Operator2);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+
+ Status = PushBool ((BOOLEAN)(Operator || Operator2));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+ break;
+
+ case EFI_DEP_NOT:
+ DEBUG ((DEBUG_DISPATCH, " NOT\n"));
+ Status = PopBool (&Operator);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+
+ Status = PushBool ((BOOLEAN)(!Operator));
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+ break;
+
+ case EFI_DEP_TRUE:
+ DEBUG ((DEBUG_DISPATCH, " TRUE\n"));
+ Status = PushBool (TRUE);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+ break;
+
+ case EFI_DEP_FALSE:
+ DEBUG ((DEBUG_DISPATCH, " FALSE\n"));
+ Status = PushBool (FALSE);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+ break;
+
+ case EFI_DEP_END:
+ DEBUG ((DEBUG_DISPATCH, " END\n"));
+ Status = PopBool (&Operator);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+ DEBUG ((DEBUG_DISPATCH, " RESULT = %a\n", Operator ? "TRUE" : "FALSE"));
+ return Operator;
+
+ case EFI_DEP_REPLACE_TRUE:
+ CopyMem (&DriverGuid, Iterator + 1, sizeof (EFI_GUID));
+ DEBUG ((DEBUG_DISPATCH, " PUSH GUID(%g) = TRUE\n", &DriverGuid));
+ Status = PushBool (TRUE);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unexpected error)\n"));
+ return FALSE;
+ }
+
+ Iterator += sizeof (EFI_GUID);
+ break;
+
+ default:
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE (Unknown opcode)\n"));
+ goto Done;
+ }
+
+ //
+ // Skip over the Dependency Op Code we just processed in the switch.
+ // The math is done out of order, but it should not matter. That is
+ // we may add in the sizeof (EFI_GUID) before we account for the OP Code.
+ // This is not an issue, since we just need the correct end result. You
+ // need to be careful using Iterator in the loop as it's intermediate value
+ // may be strange.
+ //
+ Iterator++;
+ }
+
+Done:
+ return FALSE;
+}
diff --git a/StandaloneMmPkg/Core/Dispatcher.c b/StandaloneMmPkg/Core/Dispatcher.c
new file mode 100644
index 0000000000..eba68dc17a
--- /dev/null
+++ b/StandaloneMmPkg/Core/Dispatcher.c
@@ -0,0 +1,1071 @@
+/** @file
+ MM Driver Dispatcher.
+
+ Step #1 - When a FV protocol is added to the system every driver in the FV
+ is added to the mDiscoveredList. The Before, and After Depex are
+ pre-processed as drivers are added to the mDiscoveredList. If an Apriori
+ file exists in the FV those drivers are addeded to the
+ mScheduledQueue. The mFvHandleList is used to make sure a
+ FV is only processed once.
+
+ Step #2 - Dispatch. Remove driver from the mScheduledQueue and load and
+ start it. After mScheduledQueue is drained check the
+ mDiscoveredList to see if any item has a Depex that is ready to
+ be placed on the mScheduledQueue.
+
+ Step #3 - Adding to the mScheduledQueue requires that you process Before
+ and After dependencies. This is done recursively as the call to add
+ to the mScheduledQueue checks for Before and recursively adds
+ all Befores. It then addes the item that was passed in and then
+ processess the After dependecies by recursively calling the routine.
+
+ Dispatcher Rules:
+ The rules for the dispatcher are similar to the DXE dispatcher.
+
+ The rules for DXE dispatcher are in chapter 10 of the DXE CIS. Figure 10-3
+ is the state diagram for the DXE dispatcher
+
+ Depex - Dependency Expresion.
+
+ Copyright (c) 2014, Hewlett-Packard Development Company, L.P.
+ Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+//
+// MM Dispatcher Data structures
+//
+#define KNOWN_HANDLE_SIGNATURE SIGNATURE_32('k','n','o','w')
+typedef struct {
+ UINTN Signature;
+ LIST_ENTRY Link; // mFvHandleList
+ EFI_HANDLE Handle;
+} KNOWN_HANDLE;
+
+//
+// Function Prototypes
+//
+
+EFI_STATUS
+MmCoreFfsFindMmDriver (
+ IN EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader
+ );
+
+/**
+ Insert InsertedDriverEntry onto the mScheduledQueue. To do this you
+ must add any driver with a before dependency on InsertedDriverEntry first.
+ You do this by recursively calling this routine. After all the Befores are
+ processed you can add InsertedDriverEntry to the mScheduledQueue.
+ Then you can add any driver with an After dependency on InsertedDriverEntry
+ by recursively calling this routine.
+
+ @param InsertedDriverEntry The driver to insert on the ScheduledLink Queue
+
+**/
+VOID
+MmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (
+ IN EFI_MM_DRIVER_ENTRY *InsertedDriverEntry
+ );
+
+//
+// The Driver List contains one copy of every driver that has been discovered.
+// Items are never removed from the driver list. List of EFI_MM_DRIVER_ENTRY
+//
+LIST_ENTRY mDiscoveredList = INITIALIZE_LIST_HEAD_VARIABLE (mDiscoveredList);
+
+//
+// Queue of drivers that are ready to dispatch. This queue is a subset of the
+// mDiscoveredList.list of EFI_MM_DRIVER_ENTRY.
+//
+LIST_ENTRY mScheduledQueue = INITIALIZE_LIST_HEAD_VARIABLE (mScheduledQueue);
+
+//
+// List of handles who's Fv's have been parsed and added to the mFwDriverList.
+//
+LIST_ENTRY mFvHandleList = INITIALIZE_LIST_HEAD_VARIABLE (mFvHandleList);
+
+//
+// Flag for the MM Dispacher. TRUE if dispatcher is execuing.
+//
+BOOLEAN gDispatcherRunning = FALSE;
+
+//
+// Flag for the MM Dispacher. TRUE if there is one or more MM drivers ready to be dispatched
+//
+BOOLEAN gRequestDispatch = FALSE;
+
+//
+// The global variable is defined for Loading modules at fixed address feature to track the MM code
+// memory range usage. It is a bit mapped array in which every bit indicates the correspoding
+// memory page available or not.
+//
+GLOBAL_REMOVE_IF_UNREFERENCED UINT64 *mMmCodeMemoryRangeUsageBitMap=NULL;
+
+/**
+ To check memory usage bit map array to figure out if the memory range in which the image will be loaded is available or not. If
+ memory range is avaliable, the function will mark the correponding bits to 1 which indicates the memory range is used.
+ The function is only invoked when load modules at fixed address feature is enabled.
+
+ @param ImageBase The base addres the image will be loaded at.
+ @param ImageSize The size of the image
+
+ @retval EFI_SUCCESS The memory range the image will be loaded in is available
+ @retval EFI_NOT_FOUND The memory range the image will be loaded in is not available
+**/
+EFI_STATUS
+CheckAndMarkFixLoadingMemoryUsageBitMap (
+ IN EFI_PHYSICAL_ADDRESS ImageBase,
+ IN UINTN ImageSize
+ )
+{
+ UINT32 MmCodePageNumber;
+ UINT64 MmCodeSize;
+ EFI_PHYSICAL_ADDRESS MmCodeBase;
+ UINTN BaseOffsetPageNumber;
+ UINTN TopOffsetPageNumber;
+ UINTN Index;
+ //
+ // Build tool will calculate the smm code size and then patch the PcdLoadFixAddressMmCodePageNumber
+ //
+ MmCodePageNumber = 0;
+ MmCodeSize = EFI_PAGES_TO_SIZE (MmCodePageNumber);
+ MmCodeBase = gLoadModuleAtFixAddressMmramBase;
+
+ //
+ // If the memory usage bit map is not initialized, do it. Every bit in the array
+ // indicate the status of the corresponding memory page, available or not
+ //
+ if (mMmCodeMemoryRangeUsageBitMap == NULL) {
+ mMmCodeMemoryRangeUsageBitMap = AllocateZeroPool(((MmCodePageNumber / 64) + 1)*sizeof(UINT64));
+ }
+ //
+ // If the Dxe code memory range is not allocated or the bit map array allocation failed, return EFI_NOT_FOUND
+ //
+ if (mMmCodeMemoryRangeUsageBitMap == NULL) {
+ return EFI_NOT_FOUND;
+ }
+ //
+ // see if the memory range for loading the image is in the MM code range.
+ //
+ if (MmCodeBase + MmCodeSize < ImageBase + ImageSize || MmCodeBase > ImageBase) {
+ return EFI_NOT_FOUND;
+ }
+ //
+ // Test if the memory is avalaible or not.
+ //
+ BaseOffsetPageNumber = (UINTN)EFI_SIZE_TO_PAGES((UINT32)(ImageBase - MmCodeBase));
+ TopOffsetPageNumber = (UINTN)EFI_SIZE_TO_PAGES((UINT32)(ImageBase + ImageSize - MmCodeBase));
+ for (Index = BaseOffsetPageNumber; Index < TopOffsetPageNumber; Index ++) {
+ if ((mMmCodeMemoryRangeUsageBitMap[Index / 64] & LShiftU64(1, (Index % 64))) != 0) {
+ //
+ // This page is already used.
+ //
+ return EFI_NOT_FOUND;
+ }
+ }
+
+ //
+ // Being here means the memory range is available. So mark the bits for the memory range
+ //
+ for (Index = BaseOffsetPageNumber; Index < TopOffsetPageNumber; Index ++) {
+ mMmCodeMemoryRangeUsageBitMap[Index / 64] |= LShiftU64(1, (Index % 64));
+ }
+ return EFI_SUCCESS;
+}
+/**
+ Get the fixed loading address from image header assigned by build tool. This function only be called
+ when Loading module at Fixed address feature enabled.
+
+ @param ImageContext Pointer to the image context structure that describes the PE/COFF
+ image that needs to be examined by this function.
+ @retval EFI_SUCCESS An fixed loading address is assigned to this image by build tools .
+ @retval EFI_NOT_FOUND The image has no assigned fixed loadding address.
+
+**/
+EFI_STATUS
+GetPeCoffImageFixLoadingAssignedAddress(
+ IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext
+ )
+{
+ UINTN SectionHeaderOffset;
+ EFI_STATUS Status;
+ EFI_IMAGE_SECTION_HEADER SectionHeader;
+ EFI_IMAGE_OPTIONAL_HEADER_UNION *ImgHdr;
+ EFI_PHYSICAL_ADDRESS FixLoadingAddress;
+ UINT16 Index;
+ UINTN Size;
+ UINT16 NumberOfSections;
+ UINT64 ValueInSectionHeader;
+
+ FixLoadingAddress = 0;
+ Status = EFI_NOT_FOUND;
+
+ //
+ // Get PeHeader pointer
+ //
+ ImgHdr = (EFI_IMAGE_OPTIONAL_HEADER_UNION *)((CHAR8* )ImageContext->Handle + ImageContext->PeCoffHeaderOffset);
+ SectionHeaderOffset = ImageContext->PeCoffHeaderOffset +
+ sizeof (UINT32) +
+ sizeof (EFI_IMAGE_FILE_HEADER) +
+ ImgHdr->Pe32.FileHeader.SizeOfOptionalHeader;
+ NumberOfSections = ImgHdr->Pe32.FileHeader.NumberOfSections;
+
+ //
+ // Get base address from the first section header that doesn't point to code section.
+ //
+ for (Index = 0; Index < NumberOfSections; Index++) {
+ //
+ // Read section header from file
+ //
+ Size = sizeof (EFI_IMAGE_SECTION_HEADER);
+ Status = ImageContext->ImageRead (
+ ImageContext->Handle,
+ SectionHeaderOffset,
+ &Size,
+ &SectionHeader
+ );
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ Status = EFI_NOT_FOUND;
+
+ if ((SectionHeader.Characteristics & EFI_IMAGE_SCN_CNT_CODE) == 0) {
+ //
+ // Build tool will save the address in PointerToRelocations & PointerToLineNumbers fields in the first section header
+ // that doesn't point to code section in image header.So there is an assumption that when the feature is enabled,
+ // if a module with a loading address assigned by tools, the PointerToRelocations & PointerToLineNumbers fields
+ // should not be Zero, or else, these 2 fields should be set to Zero
+ //
+ ValueInSectionHeader = ReadUnaligned64((UINT64*)&SectionHeader.PointerToRelocations);
+ if (ValueInSectionHeader != 0) {
+ //
+ // Found first section header that doesn't point to code section in which build tool saves the
+ // offset to SMRAM base as image base in PointerToRelocations & PointerToLineNumbers fields
+ //
+ FixLoadingAddress = (EFI_PHYSICAL_ADDRESS)(gLoadModuleAtFixAddressMmramBase + (INT64)ValueInSectionHeader);
+ //
+ // Check if the memory range is available.
+ //
+ Status = CheckAndMarkFixLoadingMemoryUsageBitMap (FixLoadingAddress, (UINTN)(ImageContext->ImageSize + ImageContext->SectionAlignment));
+ if (!EFI_ERROR(Status)) {
+ //
+ // The assigned address is valid. Return the specified loading address
+ //
+ ImageContext->ImageAddress = FixLoadingAddress;
+ }
+ }
+ break;
+ }
+ SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER);
+ }
+ DEBUG ((EFI_D_INFO|EFI_D_LOAD, "LOADING MODULE FIXED INFO: Loading module at fixed address %x, Status = %r\n", FixLoadingAddress, Status));
+ return Status;
+}
+/**
+ Loads an EFI image into SMRAM.
+
+ @param DriverEntry EFI_MM_DRIVER_ENTRY instance
+
+ @return EFI_STATUS
+
+**/
+EFI_STATUS
+EFIAPI
+MmLoadImage (
+ IN OUT EFI_MM_DRIVER_ENTRY *DriverEntry
+ )
+{
+ VOID *Buffer;
+ UINTN PageCount;
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS DstBuffer;
+ PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;
+
+ DEBUG ((EFI_D_INFO, "MmLoadImage - %g\n", &DriverEntry->FileName));
+
+ Buffer = AllocateCopyPool (DriverEntry->Pe32DataSize, DriverEntry->Pe32Data);
+ if (Buffer == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Status = EFI_SUCCESS;
+
+ //
+ // Initialize ImageContext
+ //
+ ImageContext.Handle = Buffer;
+ ImageContext.ImageRead = PeCoffLoaderImageReadFromMemory;
+
+ //
+ // Get information about the image being loaded
+ //
+ Status = PeCoffLoaderGetImageInfo (&ImageContext);
+ if (EFI_ERROR (Status)) {
+ if (Buffer != NULL) {
+ MmFreePool (Buffer);
+ }
+ return Status;
+ }
+
+ PageCount = (UINTN)EFI_SIZE_TO_PAGES((UINTN)ImageContext.ImageSize + ImageContext.SectionAlignment);
+ DstBuffer = (UINTN)(-1);
+
+ Status = MmAllocatePages (
+ AllocateMaxAddress,
+ EfiRuntimeServicesCode,
+ PageCount,
+ &DstBuffer
+ );
+ if (EFI_ERROR (Status)) {
+ if (Buffer != NULL) {
+ MmFreePool (Buffer);
+ }
+ return Status;
+ }
+
+ ImageContext.ImageAddress = (EFI_PHYSICAL_ADDRESS)DstBuffer;
+
+ //
+ // Align buffer on section boundry
+ //
+ ImageContext.ImageAddress += ImageContext.SectionAlignment - 1;
+ ImageContext.ImageAddress &= ~((EFI_PHYSICAL_ADDRESS)(ImageContext.SectionAlignment - 1));
+
+ //
+ // Load the image to our new buffer
+ //
+ Status = PeCoffLoaderLoadImage (&ImageContext);
+ if (EFI_ERROR (Status)) {
+ if (Buffer != NULL) {
+ MmFreePool (Buffer);
+ }
+ MmFreePages (DstBuffer, PageCount);
+ return Status;
+ }
+
+ //
+ // Relocate the image in our new buffer
+ //
+ Status = PeCoffLoaderRelocateImage (&ImageContext);
+ if (EFI_ERROR (Status)) {
+ if (Buffer != NULL) {
+ MmFreePool (Buffer);
+ }
+ MmFreePages (DstBuffer, PageCount);
+ return Status;
+ }
+
+ //
+ // Flush the instruction cache so the image data are written before we execute it
+ //
+ InvalidateInstructionCacheRange ((VOID *)(UINTN) ImageContext.ImageAddress, (UINTN) ImageContext.ImageSize);
+
+ //
+ // Save Image EntryPoint in DriverEntry
+ //
+ DriverEntry->ImageEntryPoint = ImageContext.EntryPoint;
+ DriverEntry->ImageBuffer = DstBuffer;
+ DriverEntry->NumberOfPage = PageCount;
+
+ if (mEfiSystemTable != NULL) {
+ Status = mEfiSystemTable->BootServices->AllocatePool (EfiBootServicesData, sizeof (EFI_LOADED_IMAGE_PROTOCOL), (VOID **)&DriverEntry->LoadedImage);
+ if (EFI_ERROR (Status)) {
+ if (Buffer != NULL) {
+ MmFreePool (Buffer);
+ }
+ MmFreePages (DstBuffer, PageCount);
+ return Status;
+ }
+
+ ZeroMem (DriverEntry->LoadedImage, sizeof (EFI_LOADED_IMAGE_PROTOCOL));
+ //
+ // Fill in the remaining fields of the Loaded Image Protocol instance.
+ // Note: ImageBase is an SMRAM address that can not be accessed outside of SMRAM if SMRAM window is closed.
+ //
+ DriverEntry->LoadedImage->Revision = EFI_LOADED_IMAGE_PROTOCOL_REVISION;
+ DriverEntry->LoadedImage->ParentHandle = NULL;
+ DriverEntry->LoadedImage->SystemTable = mEfiSystemTable;
+ DriverEntry->LoadedImage->DeviceHandle = NULL;
+ DriverEntry->LoadedImage->FilePath = NULL;
+
+ DriverEntry->LoadedImage->ImageBase = (VOID *)(UINTN)DriverEntry->ImageBuffer;
+ DriverEntry->LoadedImage->ImageSize = ImageContext.ImageSize;
+ DriverEntry->LoadedImage->ImageCodeType = EfiRuntimeServicesCode;
+ DriverEntry->LoadedImage->ImageDataType = EfiRuntimeServicesData;
+
+ //
+ // Create a new image handle in the UEFI handle database for the MM Driver
+ //
+ DriverEntry->ImageHandle = NULL;
+ Status = mEfiSystemTable->BootServices->InstallMultipleProtocolInterfaces (
+ &DriverEntry->ImageHandle,
+ &gEfiLoadedImageProtocolGuid, DriverEntry->LoadedImage,
+ NULL
+ );
+ }
+
+ //
+ // Print the load address and the PDB file name if it is available
+ //
+
+ DEBUG_CODE_BEGIN ();
+
+ UINTN Index;
+ UINTN StartIndex;
+ CHAR8 EfiFileName[256];
+
+
+ DEBUG ((DEBUG_INFO | DEBUG_LOAD,
+ "Loading MM driver at 0x%11p EntryPoint=0x%11p ",
+ (VOID *)(UINTN) ImageContext.ImageAddress,
+ FUNCTION_ENTRY_POINT (ImageContext.EntryPoint)));
+
+
+ //
+ // Print Module Name by Pdb file path.
+ // Windows and Unix style file path are all trimmed correctly.
+ //
+ if (ImageContext.PdbPointer != NULL) {
+ StartIndex = 0;
+ for (Index = 0; ImageContext.PdbPointer[Index] != 0; Index++) {
+ if ((ImageContext.PdbPointer[Index] == '\\') || (ImageContext.PdbPointer[Index] == '/')) {
+ StartIndex = Index + 1;
+ }
+ }
+ //
+ // Copy the PDB file name to our temporary string, and replace .pdb with .efi
+ // The PDB file name is limited in the range of 0~255.
+ // If the length is bigger than 255, trim the redudant characters to avoid overflow in array boundary.
+ //
+ for (Index = 0; Index < sizeof (EfiFileName) - 4; Index++) {
+ EfiFileName[Index] = ImageContext.PdbPointer[Index + StartIndex];
+ if (EfiFileName[Index] == 0) {
+ EfiFileName[Index] = '.';
+ }
+ if (EfiFileName[Index] == '.') {
+ EfiFileName[Index + 1] = 'e';
+ EfiFileName[Index + 2] = 'f';
+ EfiFileName[Index + 3] = 'i';
+ EfiFileName[Index + 4] = 0;
+ break;
+ }
+ }
+
+ if (Index == sizeof (EfiFileName) - 4) {
+ EfiFileName[Index] = 0;
+ }
+ DEBUG ((DEBUG_INFO | DEBUG_LOAD, "%a", EfiFileName)); // &Image->ImageContext.PdbPointer[StartIndex]));
+ }
+ DEBUG ((DEBUG_INFO | DEBUG_LOAD, "\n"));
+
+ DEBUG_CODE_END ();
+
+ //
+ // Free buffer allocated by Fv->ReadSection.
+ //
+ // The UEFI Boot Services FreePool() function must be used because Fv->ReadSection
+ // used the UEFI Boot Services AllocatePool() function
+ //
+ MmFreePool(Buffer);
+ return Status;
+}
+
+/**
+ Preprocess dependency expression and update DriverEntry to reflect the
+ state of Before and After dependencies. If DriverEntry->Before
+ or DriverEntry->After is set it will never be cleared.
+
+ @param DriverEntry DriverEntry element to update .
+
+ @retval EFI_SUCCESS It always works.
+
+**/
+EFI_STATUS
+MmPreProcessDepex (
+ IN EFI_MM_DRIVER_ENTRY *DriverEntry
+ )
+{
+ UINT8 *Iterator;
+
+ Iterator = DriverEntry->Depex;
+ DriverEntry->Dependent = TRUE;
+
+ if (*Iterator == EFI_DEP_BEFORE) {
+ DriverEntry->Before = TRUE;
+ } else if (*Iterator == EFI_DEP_AFTER) {
+ DriverEntry->After = TRUE;
+ }
+
+ if (DriverEntry->Before || DriverEntry->After) {
+ CopyMem (&DriverEntry->BeforeAfterGuid, Iterator + 1, sizeof (EFI_GUID));
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Read Depex and pre-process the Depex for Before and After. If Section Extraction
+ protocol returns an error via ReadSection defer the reading of the Depex.
+
+ @param DriverEntry Driver to work on.
+
+ @retval EFI_SUCCESS Depex read and preprossesed
+ @retval EFI_PROTOCOL_ERROR The section extraction protocol returned an error
+ and Depex reading needs to be retried.
+ @retval Error DEPEX not found.
+
+**/
+EFI_STATUS
+MmGetDepexSectionAndPreProccess (
+ IN EFI_MM_DRIVER_ENTRY *DriverEntry
+ )
+{
+ EFI_STATUS Status;
+
+ //
+ // Data already read
+ //
+ if (DriverEntry->Depex == NULL) {
+ Status = EFI_NOT_FOUND;
+ } else {
+ Status = EFI_SUCCESS;
+ }
+ if (EFI_ERROR (Status)) {
+ if (Status == EFI_PROTOCOL_ERROR) {
+ //
+ // The section extraction protocol failed so set protocol error flag
+ //
+ DriverEntry->DepexProtocolError = TRUE;
+ } else {
+ //
+ // If no Depex assume depend on all architectural protocols
+ //
+ DriverEntry->Depex = NULL;
+ DriverEntry->Dependent = TRUE;
+ DriverEntry->DepexProtocolError = FALSE;
+ }
+ } else {
+ //
+ // Set Before and After state information based on Depex
+ // Driver will be put in Dependent state
+ //
+ MmPreProcessDepex (DriverEntry);
+ DriverEntry->DepexProtocolError = FALSE;
+ }
+
+ return Status;
+}
+
+/**
+ This is the main Dispatcher for MM and it exits when there are no more
+ drivers to run. Drain the mScheduledQueue and load and start a PE
+ image for each driver. Search the mDiscoveredList to see if any driver can
+ be placed on the mScheduledQueue. If no drivers are placed on the
+ mScheduledQueue exit the function.
+
+ @retval EFI_SUCCESS All of the MM Drivers that could be dispatched
+ have been run and the MM Entry Point has been
+ registered.
+ @retval EFI_NOT_READY The MM Driver that registered the MM Entry Point
+ was just dispatched.
+ @retval EFI_NOT_FOUND There are no MM Drivers available to be dispatched.
+ @retval EFI_ALREADY_STARTED The MM Dispatcher is already running
+
+**/
+EFI_STATUS
+MmDispatcher (
+ VOID
+ )
+{
+ EFI_STATUS Status;
+ LIST_ENTRY *Link;
+ EFI_MM_DRIVER_ENTRY *DriverEntry;
+ BOOLEAN ReadyToRun;
+ BOOLEAN PreviousMmEntryPointRegistered;
+
+ DEBUG ((EFI_D_INFO, "MmDispatcher\n"));
+
+ if (!gRequestDispatch) {
+ DEBUG ((EFI_D_INFO, " !gRequestDispatch\n"));
+ return EFI_NOT_FOUND;
+ }
+
+ if (gDispatcherRunning) {
+ DEBUG ((EFI_D_INFO, " gDispatcherRunning\n"));
+ //
+ // If the dispatcher is running don't let it be restarted.
+ //
+ return EFI_ALREADY_STARTED;
+ }
+
+ gDispatcherRunning = TRUE;
+
+ do {
+ //
+ // Drain the Scheduled Queue
+ //
+ DEBUG ((EFI_D_INFO, " Drain the Scheduled Queue\n"));
+ while (!IsListEmpty (&mScheduledQueue)) {
+ DriverEntry = CR (
+ mScheduledQueue.ForwardLink,
+ EFI_MM_DRIVER_ENTRY,
+ ScheduledLink,
+ EFI_MM_DRIVER_ENTRY_SIGNATURE
+ );
+ DEBUG ((EFI_D_INFO, " DriverEntry (Scheduled) - %g\n", &DriverEntry->FileName));
+
+ //
+ // Load the MM Driver image into memory. If the Driver was transitioned from
+ // Untrused to Scheduled it would have already been loaded so we may need to
+ // skip the LoadImage
+ //
+ if (DriverEntry->ImageHandle == NULL) {
+ Status = MmLoadImage (DriverEntry);
+
+ //
+ // Update the driver state to reflect that it's been loaded
+ //
+ if (EFI_ERROR (Status)) {
+ //
+ // The MM Driver could not be loaded, and do not attempt to load or start it again.
+ // Take driver from Scheduled to Initialized.
+ //
+ DriverEntry->Initialized = TRUE;
+ DriverEntry->Scheduled = FALSE;
+ RemoveEntryList (&DriverEntry->ScheduledLink);
+
+ //
+ // If it's an error don't try the StartImage
+ //
+ continue;
+ }
+ }
+
+ DriverEntry->Scheduled = FALSE;
+ DriverEntry->Initialized = TRUE;
+ RemoveEntryList (&DriverEntry->ScheduledLink);
+
+ /*REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
+ EFI_PROGRESS_CODE,
+ EFI_SOFTWARE_MM_DRIVER | EFI_SW_PC_INIT_BEGIN,
+ &DriverEntry->ImageHandle,
+ sizeof (DriverEntry->ImageHandle)
+ );*/
+
+ //
+ // Cache state of MmEntryPointRegistered before calling entry point
+ //
+ PreviousMmEntryPointRegistered = gMmCorePrivate->MmEntryPointRegistered;
+
+ //
+ // For each MM driver, pass NULL as ImageHandle
+ //
+ if (mEfiSystemTable == NULL) {
+ DEBUG ((EFI_D_INFO, "StartImage - 0x%x (Standalone Mode)\n", DriverEntry->ImageEntryPoint));
+ Status = ((MM_IMAGE_ENTRY_POINT)(UINTN)DriverEntry->ImageEntryPoint)(DriverEntry->ImageHandle, &gMmCoreMmst);
+ } else {
+ DEBUG ((EFI_D_INFO, "StartImage - 0x%x (Tradition Mode)\n", DriverEntry->ImageEntryPoint));
+ Status = ((EFI_IMAGE_ENTRY_POINT)(UINTN)DriverEntry->ImageEntryPoint)(DriverEntry->ImageHandle, mEfiSystemTable);
+ }
+ if (EFI_ERROR(Status)){
+ DEBUG ((EFI_D_INFO, "StartImage Status - %r\n", Status));
+ MmFreePages(DriverEntry->ImageBuffer, DriverEntry->NumberOfPage);
+ }
+
+ /*REPORT_STATUS_CODE_WITH_EXTENDED_DATA (
+ EFI_PROGRESS_CODE,
+ EFI_SOFTWARE_MM_DRIVER | EFI_SW_PC_INIT_END,
+ &DriverEntry->ImageHandle,
+ sizeof (DriverEntry->ImageHandle)
+ );*/
+
+ if (!PreviousMmEntryPointRegistered && gMmCorePrivate->MmEntryPointRegistered) {
+ //
+ // Return immediately if the MM Entry Point was registered by the MM
+ // Driver that was just dispatched. The MM IPL will reinvoke the MM
+ // Core Dispatcher. This is required so MM Mode may be enabled as soon
+ // as all the dependent MM Drivers for MM Mode have been dispatched.
+ // Once the MM Entry Point has been registered, then MM Mode will be
+ // used.
+ //
+ gRequestDispatch = TRUE;
+ gDispatcherRunning = FALSE;
+ return EFI_NOT_READY;
+ }
+ }
+
+ //
+ // Search DriverList for items to place on Scheduled Queue
+ //
+ DEBUG ((EFI_D_INFO, " Search DriverList for items to place on Scheduled Queue\n"));
+ ReadyToRun = FALSE;
+ for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {
+ DriverEntry = CR (Link, EFI_MM_DRIVER_ENTRY, Link, EFI_MM_DRIVER_ENTRY_SIGNATURE);
+ DEBUG ((EFI_D_INFO, " DriverEntry (Discovered) - %g\n", &DriverEntry->FileName));
+
+ if (DriverEntry->DepexProtocolError){
+ //
+ // If Section Extraction Protocol did not let the Depex be read before retry the read
+ //
+ Status = MmGetDepexSectionAndPreProccess (DriverEntry);
+ }
+
+ if (DriverEntry->Dependent) {
+ if (MmIsSchedulable (DriverEntry)) {
+ MmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);
+ ReadyToRun = TRUE;
+ }
+ }
+ }
+ } while (ReadyToRun);
+
+ //
+ // If there is no more MM driver to dispatch, stop the dispatch request
+ //
+ DEBUG ((EFI_D_INFO, " no more MM driver to dispatch, stop the dispatch request\n"));
+ gRequestDispatch = FALSE;
+ for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {
+ DriverEntry = CR (Link, EFI_MM_DRIVER_ENTRY, Link, EFI_MM_DRIVER_ENTRY_SIGNATURE);
+ DEBUG ((EFI_D_INFO, " DriverEntry (Discovered) - %g\n", &DriverEntry->FileName));
+
+ if (!DriverEntry->Initialized){
+ //
+ // We have MM driver pending to dispatch
+ //
+ gRequestDispatch = TRUE;
+ break;
+ }
+ }
+
+ gDispatcherRunning = FALSE;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Insert InsertedDriverEntry onto the mScheduledQueue. To do this you
+ must add any driver with a before dependency on InsertedDriverEntry first.
+ You do this by recursively calling this routine. After all the Befores are
+ processed you can add InsertedDriverEntry to the mScheduledQueue.
+ Then you can add any driver with an After dependency on InsertedDriverEntry
+ by recursively calling this routine.
+
+ @param InsertedDriverEntry The driver to insert on the ScheduledLink Queue
+
+**/
+VOID
+MmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (
+ IN EFI_MM_DRIVER_ENTRY *InsertedDriverEntry
+ )
+{
+ LIST_ENTRY *Link;
+ EFI_MM_DRIVER_ENTRY *DriverEntry;
+
+ //
+ // Process Before Dependency
+ //
+ for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {
+ DriverEntry = CR(Link, EFI_MM_DRIVER_ENTRY, Link, EFI_MM_DRIVER_ENTRY_SIGNATURE);
+ if (DriverEntry->Before && DriverEntry->Dependent && DriverEntry != InsertedDriverEntry) {
+ DEBUG ((DEBUG_DISPATCH, "Evaluate MM DEPEX for FFS(%g)\n", &DriverEntry->FileName));
+ DEBUG ((DEBUG_DISPATCH, " BEFORE FFS(%g) = ", &DriverEntry->BeforeAfterGuid));
+ if (CompareGuid (&InsertedDriverEntry->FileName, &DriverEntry->BeforeAfterGuid)) {
+ //
+ // Recursively process BEFORE
+ //
+ DEBUG ((DEBUG_DISPATCH, "TRUE\n END\n RESULT = TRUE\n"));
+ MmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);
+ } else {
+ DEBUG ((DEBUG_DISPATCH, "FALSE\n END\n RESULT = FALSE\n"));
+ }
+ }
+ }
+
+ //
+ // Convert driver from Dependent to Scheduled state
+ //
+
+ InsertedDriverEntry->Dependent = FALSE;
+ InsertedDriverEntry->Scheduled = TRUE;
+ InsertTailList (&mScheduledQueue, &InsertedDriverEntry->ScheduledLink);
+
+
+ //
+ // Process After Dependency
+ //
+ for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {
+ DriverEntry = CR(Link, EFI_MM_DRIVER_ENTRY, Link, EFI_MM_DRIVER_ENTRY_SIGNATURE);
+ if (DriverEntry->After && DriverEntry->Dependent && DriverEntry != InsertedDriverEntry) {
+ DEBUG ((DEBUG_DISPATCH, "Evaluate MM DEPEX for FFS(%g)\n", &DriverEntry->FileName));
+ DEBUG ((DEBUG_DISPATCH, " AFTER FFS(%g) = ", &DriverEntry->BeforeAfterGuid));
+ if (CompareGuid (&InsertedDriverEntry->FileName, &DriverEntry->BeforeAfterGuid)) {
+ //
+ // Recursively process AFTER
+ //
+ DEBUG ((DEBUG_DISPATCH, "TRUE\n END\n RESULT = TRUE\n"));
+ MmInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);
+ } else {
+ DEBUG ((DEBUG_DISPATCH, "FALSE\n END\n RESULT = FALSE\n"));
+ }
+ }
+ }
+}
+
+/**
+ Return TRUE if the Fv has been processed, FALSE if not.
+
+ @param FvHandle The handle of a FV that's being tested
+
+ @retval TRUE Fv protocol on FvHandle has been processed
+ @retval FALSE Fv protocol on FvHandle has not yet been
+ processed
+
+**/
+BOOLEAN
+FvHasBeenProcessed (
+ IN EFI_HANDLE FvHandle
+ )
+{
+ LIST_ENTRY *Link;
+ KNOWN_HANDLE *KnownHandle;
+
+ for (Link = mFvHandleList.ForwardLink; Link != &mFvHandleList; Link = Link->ForwardLink) {
+ KnownHandle = CR(Link, KNOWN_HANDLE, Link, KNOWN_HANDLE_SIGNATURE);
+ if (KnownHandle->Handle == FvHandle) {
+ return TRUE;
+ }
+ }
+ return FALSE;
+}
+
+/**
+ Remember that Fv protocol on FvHandle has had it's drivers placed on the
+ mDiscoveredList. This fucntion adds entries on the mFvHandleList. Items are
+ never removed/freed from the mFvHandleList.
+
+ @param FvHandle The handle of a FV that has been processed
+
+**/
+VOID
+FvIsBeingProcesssed (
+ IN EFI_HANDLE FvHandle
+ )
+{
+ KNOWN_HANDLE *KnownHandle;
+
+ DEBUG ((EFI_D_INFO, "FvIsBeingProcesssed - 0x%08x\n", FvHandle));
+
+ KnownHandle = AllocatePool (sizeof (KNOWN_HANDLE));
+ ASSERT (KnownHandle != NULL);
+
+ KnownHandle->Signature = KNOWN_HANDLE_SIGNATURE;
+ KnownHandle->Handle = FvHandle;
+ InsertTailList (&mFvHandleList, &KnownHandle->Link);
+}
+
+/**
+ Add an entry to the mDiscoveredList. Allocate memory to store the DriverEntry,
+ and initilize any state variables. Read the Depex from the FV and store it
+ in DriverEntry. Pre-process the Depex to set the Before and After state.
+ The Discovered list is never free'ed and contains booleans that represent the
+ other possible MM driver states.
+
+ @param Fv Fv protocol, needed to read Depex info out of
+ FLASH.
+ @param FvHandle Handle for Fv, needed in the
+ EFI_MM_DRIVER_ENTRY so that the PE image can be
+ read out of the FV at a later time.
+ @param DriverName Name of driver to add to mDiscoveredList.
+
+ @retval EFI_SUCCESS If driver was added to the mDiscoveredList.
+ @retval EFI_ALREADY_STARTED The driver has already been started. Only one
+ DriverName may be active in the system at any one
+ time.
+
+**/
+EFI_STATUS
+MmAddToDriverList (
+ IN EFI_HANDLE FvHandle,
+ IN VOID *Pe32Data,
+ IN UINTN Pe32DataSize,
+ IN VOID *Depex,
+ IN UINTN DepexSize,
+ IN EFI_GUID *DriverName
+ )
+{
+ EFI_MM_DRIVER_ENTRY *DriverEntry;
+
+ DEBUG ((EFI_D_INFO, "MmAddToDriverList - %g (0x%08x)\n", DriverName, Pe32Data));
+
+ //
+ // Create the Driver Entry for the list. ZeroPool initializes lots of variables to
+ // NULL or FALSE.
+ //
+ DriverEntry = AllocateZeroPool (sizeof (EFI_MM_DRIVER_ENTRY));
+ ASSERT (DriverEntry != NULL);
+
+ DriverEntry->Signature = EFI_MM_DRIVER_ENTRY_SIGNATURE;
+ CopyGuid (&DriverEntry->FileName, DriverName);
+ DriverEntry->FvHandle = FvHandle;
+ DriverEntry->Pe32Data = Pe32Data;
+ DriverEntry->Pe32DataSize = Pe32DataSize;
+ DriverEntry->Depex = Depex;
+ DriverEntry->DepexSize = DepexSize;
+
+ MmGetDepexSectionAndPreProccess (DriverEntry);
+
+ InsertTailList (&mDiscoveredList, &DriverEntry->Link);
+ gRequestDispatch = TRUE;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function is the main entry point for an MM handler dispatch
+ or communicate-based callback.
+
+ Event notification that is fired every time a FV dispatch protocol is added.
+ More than one protocol may have been added when this event is fired, so you
+ must loop on MmLocateHandle () to see how many protocols were added and
+ do the following to each FV:
+ If the Fv has already been processed, skip it. If the Fv has not been
+ processed then mark it as being processed, as we are about to process it.
+ Read the Fv and add any driver in the Fv to the mDiscoveredList.The
+ mDiscoveredList is never free'ed and contains variables that define
+ the other states the MM driver transitions to..
+ While you are at it read the A Priori file into memory.
+ Place drivers in the A Priori list onto the mScheduledQueue.
+
+ @param DispatchHandle The unique handle assigned to this handler by SmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmDriverDispatchHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+
+ DEBUG ((EFI_D_INFO, "MmDriverDispatchHandler\n"));
+
+ //
+ // Execute the MM Dispatcher on any newly discovered FVs and previously
+ // discovered MM drivers that have been discovered but not dispatched.
+ //
+ Status = MmDispatcher ();
+
+ //
+ // Check to see if CommBuffer and CommBufferSize are valid
+ //
+ if (CommBuffer != NULL && CommBufferSize != NULL) {
+ if (*CommBufferSize > 0) {
+ if (Status == EFI_NOT_READY) {
+ //
+ // If a the MM Core Entry Point was just registered, then set flag to
+ // request the MM Dispatcher to be restarted.
+ //
+ *(UINT8 *)CommBuffer = COMM_BUFFER_MM_DISPATCH_RESTART;
+ } else if (!EFI_ERROR (Status)) {
+ //
+ // Set the flag to show that the MM Dispatcher executed without errors
+ //
+ *(UINT8 *)CommBuffer = COMM_BUFFER_MM_DISPATCH_SUCCESS;
+ } else {
+ //
+ // Set the flag to show that the MM Dispatcher encountered an error
+ //
+ *(UINT8 *)CommBuffer = COMM_BUFFER_MM_DISPATCH_ERROR;
+ }
+ }
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ This function is the main entry point for an MM handler dispatch
+ or communicate-based callback.
+
+ @param DispatchHandle The unique handle assigned to this handler by SmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmFvDispatchHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ EFI_MM_COMMUNICATE_FV_DISPATCH_DATA *CommunicationFvDispatchData;
+ EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;
+
+ DEBUG ((EFI_D_INFO, "MmFvDispatchHandler\n"));
+
+ CommunicationFvDispatchData = CommBuffer;
+
+ DEBUG ((EFI_D_INFO, " Dispatch - 0x%016lx - 0x%016lx\n", CommunicationFvDispatchData->Address, CommunicationFvDispatchData->Size));
+
+ FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *)(UINTN)CommunicationFvDispatchData->Address;
+
+ MmCoreFfsFindMmDriver (FwVolHeader);
+
+ //
+ // Execute the MM Dispatcher on any newly discovered FVs and previously
+ // discovered MM drivers that have been discovered but not dispatched.
+ //
+ Status = MmDispatcher ();
+
+ return Status;
+}
+
+/**
+ Traverse the discovered list for any drivers that were discovered but not loaded
+ because the dependency experessions evaluated to false.
+
+**/
+VOID
+MmDisplayDiscoveredNotDispatched (
+ VOID
+ )
+{
+ LIST_ENTRY *Link;
+ EFI_MM_DRIVER_ENTRY *DriverEntry;
+
+ for (Link = mDiscoveredList.ForwardLink;Link !=&mDiscoveredList; Link = Link->ForwardLink) {
+ DriverEntry = CR(Link, EFI_MM_DRIVER_ENTRY, Link, EFI_MM_DRIVER_ENTRY_SIGNATURE);
+ if (DriverEntry->Dependent) {
+ DEBUG ((DEBUG_LOAD, "MM Driver %g was discovered but not loaded!!\n", &DriverEntry->FileName));
+ }
+ }
+}
diff --git a/StandaloneMmPkg/Core/FwVol.c b/StandaloneMmPkg/Core/FwVol.c
new file mode 100644
index 0000000000..bb2714ceb6
--- /dev/null
+++ b/StandaloneMmPkg/Core/FwVol.c
@@ -0,0 +1,104 @@
+/**@file
+
+Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+This program and the accompanying materials
+are licensed and made available under the terms and conditions of the BSD License
+which accompanies this distribution. The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+#include <Library/FvLib.h>
+
+//
+// List of file types supported by dispatcher
+//
+EFI_FV_FILETYPE mMmFileTypes[] = {
+ EFI_FV_FILETYPE_MM,
+ 0xE, //EFI_FV_FILETYPE_MM_STANDALONE,
+ //
+ // Note: DXE core will process the FV image file, so skip it in MM core
+ // EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE
+ //
+};
+
+EFI_STATUS
+MmAddToDriverList (
+ IN EFI_HANDLE FvHandle,
+ IN VOID *Pe32Data,
+ IN UINTN Pe32DataSize,
+ IN VOID *Depex,
+ IN UINTN DepexSize,
+ IN EFI_GUID *DriverName
+ );
+
+BOOLEAN
+FvHasBeenProcessed (
+ IN EFI_HANDLE FvHandle
+ );
+
+VOID
+FvIsBeingProcesssed (
+ IN EFI_HANDLE FvHandle
+ );
+
+EFI_STATUS
+MmCoreFfsFindMmDriver (
+ IN EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader
+ )
+/*++
+
+Routine Description:
+ Given the pointer to the Firmware Volume Header find the
+ MM driver and return it's PE32 image.
+
+Arguments:
+ FwVolHeader - Pointer to memory mapped FV
+
+Returns:
+ other - Failure
+
+--*/
+{
+ EFI_STATUS Status;
+ EFI_STATUS DepexStatus;
+ EFI_FFS_FILE_HEADER *FileHeader;
+ EFI_FV_FILETYPE FileType;
+ VOID *Pe32Data;
+ UINTN Pe32DataSize;
+ VOID *Depex;
+ UINTN DepexSize;
+ UINTN Index;
+
+ DEBUG((EFI_D_INFO, "MmCoreFfsFindMmDriver - 0x%x\n", FwVolHeader));
+
+ if (FvHasBeenProcessed (FwVolHeader)) {
+ return EFI_SUCCESS;
+ }
+
+ FvIsBeingProcesssed (FwVolHeader);
+
+ for (Index = 0; Index < sizeof(mMmFileTypes) / sizeof(mMmFileTypes[0]); Index++) {
+ DEBUG((EFI_D_INFO, "Check MmFileTypes - 0x%x\n", mMmFileTypes[Index]));
+ FileType = mMmFileTypes[Index];
+ FileHeader = NULL;
+ do {
+ Status = FfsFindNextFile(FileType, FwVolHeader, &FileHeader);
+ if (!EFI_ERROR(Status)) {
+ Status = FfsFindSectionData(EFI_SECTION_PE32, FileHeader, &Pe32Data, &Pe32DataSize);
+ DEBUG((EFI_D_INFO, "Find PE data - 0x%x\n", Pe32Data));
+ DepexStatus = FfsFindSectionData(EFI_SECTION_MM_DEPEX, FileHeader, &Depex, &DepexSize);
+ if (!EFI_ERROR(DepexStatus)) {
+ MmAddToDriverList(FwVolHeader, Pe32Data, Pe32DataSize, Depex, DepexSize, &FileHeader->Name);
+ }
+ }
+ } while (!EFI_ERROR(Status));
+ }
+
+ return Status;
+}
diff --git a/StandaloneMmPkg/Core/Handle.c b/StandaloneMmPkg/Core/Handle.c
new file mode 100644
index 0000000000..01832f4bbe
--- /dev/null
+++ b/StandaloneMmPkg/Core/Handle.c
@@ -0,0 +1,533 @@
+/** @file
+ SMM handle & protocol handling.
+
+ Copyright (c) 2009 - 2010, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+//
+// mProtocolDatabase - A list of all protocols in the system. (simple list for now)
+// gHandleList - A list of all the handles in the system
+//
+LIST_ENTRY mProtocolDatabase = INITIALIZE_LIST_HEAD_VARIABLE (mProtocolDatabase);
+LIST_ENTRY gHandleList = INITIALIZE_LIST_HEAD_VARIABLE (gHandleList);
+
+/**
+ Check whether a handle is a valid EFI_HANDLE
+
+ @param UserHandle The handle to check
+
+ @retval EFI_INVALID_PARAMETER The handle is NULL or not a valid EFI_HANDLE.
+ @retval EFI_SUCCESS The handle is valid EFI_HANDLE.
+
+**/
+EFI_STATUS
+MmValidateHandle (
+ IN EFI_HANDLE UserHandle
+ )
+{
+ IHANDLE *Handle;
+
+ Handle = (IHANDLE *)UserHandle;
+ if (Handle == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+ if (Handle->Signature != EFI_HANDLE_SIGNATURE) {
+ return EFI_INVALID_PARAMETER;
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Finds the protocol entry for the requested protocol.
+
+ @param Protocol The ID of the protocol
+ @param Create Create a new entry if not found
+
+ @return Protocol entry
+
+**/
+PROTOCOL_ENTRY *
+MmFindProtocolEntry (
+ IN EFI_GUID *Protocol,
+ IN BOOLEAN Create
+ )
+{
+ LIST_ENTRY *Link;
+ PROTOCOL_ENTRY *Item;
+ PROTOCOL_ENTRY *ProtEntry;
+
+ //
+ // Search the database for the matching GUID
+ //
+
+ ProtEntry = NULL;
+ for (Link = mProtocolDatabase.ForwardLink;
+ Link != &mProtocolDatabase;
+ Link = Link->ForwardLink) {
+
+ Item = CR(Link, PROTOCOL_ENTRY, AllEntries, PROTOCOL_ENTRY_SIGNATURE);
+ if (CompareGuid (&Item->ProtocolID, Protocol)) {
+ //
+ // This is the protocol entry
+ //
+ ProtEntry = Item;
+ break;
+ }
+ }
+
+ //
+ // If the protocol entry was not found and Create is TRUE, then
+ // allocate a new entry
+ //
+ if ((ProtEntry == NULL) && Create) {
+ ProtEntry = AllocatePool (sizeof(PROTOCOL_ENTRY));
+ if (ProtEntry != NULL) {
+ //
+ // Initialize new protocol entry structure
+ //
+ ProtEntry->Signature = PROTOCOL_ENTRY_SIGNATURE;
+ CopyGuid ((VOID *)&ProtEntry->ProtocolID, Protocol);
+ InitializeListHead (&ProtEntry->Protocols);
+ InitializeListHead (&ProtEntry->Notify);
+
+ //
+ // Add it to protocol database
+ //
+ InsertTailList (&mProtocolDatabase, &ProtEntry->AllEntries);
+ }
+ }
+ return ProtEntry;
+}
+
+/**
+ Finds the protocol instance for the requested handle and protocol.
+ Note: This function doesn't do parameters checking, it's caller's responsibility
+ to pass in valid parameters.
+
+ @param Handle The handle to search the protocol on
+ @param Protocol GUID of the protocol
+ @param Interface The interface for the protocol being searched
+
+ @return Protocol instance (NULL: Not found)
+
+**/
+PROTOCOL_INTERFACE *
+MmFindProtocolInterface (
+ IN IHANDLE *Handle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ )
+{
+ PROTOCOL_INTERFACE *Prot;
+ PROTOCOL_ENTRY *ProtEntry;
+ LIST_ENTRY *Link;
+
+ Prot = NULL;
+
+ //
+ // Lookup the protocol entry for this protocol ID
+ //
+ ProtEntry = MmFindProtocolEntry (Protocol, FALSE);
+ if (ProtEntry != NULL) {
+ //
+ // Look at each protocol interface for any matches
+ //
+ for (Link = Handle->Protocols.ForwardLink; Link != &Handle->Protocols; Link=Link->ForwardLink) {
+ //
+ // If this protocol interface matches, remove it
+ //
+ Prot = CR(Link, PROTOCOL_INTERFACE, Link, PROTOCOL_INTERFACE_SIGNATURE);
+ if (Prot->Interface == Interface && Prot->Protocol == ProtEntry) {
+ break;
+ }
+ Prot = NULL;
+ }
+ }
+ return Prot;
+}
+
+/**
+ Wrapper function to MmInstallProtocolInterfaceNotify. This is the public API which
+ Calls the private one which contains a BOOLEAN parameter for notifications
+
+ @param UserHandle The handle to install the protocol handler on,
+ or NULL if a new handle is to be allocated
+ @param Protocol The protocol to add to the handle
+ @param InterfaceType Indicates whether Interface is supplied in
+ native form.
+ @param Interface The interface for the protocol being added
+
+ @return Status code
+
+**/
+EFI_STATUS
+EFIAPI
+MmInstallProtocolInterface (
+ IN OUT EFI_HANDLE *UserHandle,
+ IN EFI_GUID *Protocol,
+ IN EFI_INTERFACE_TYPE InterfaceType,
+ IN VOID *Interface
+ )
+{
+ return MmInstallProtocolInterfaceNotify (
+ UserHandle,
+ Protocol,
+ InterfaceType,
+ Interface,
+ TRUE
+ );
+}
+
+/**
+ Installs a protocol interface into the boot services environment.
+
+ @param UserHandle The handle to install the protocol handler on,
+ or NULL if a new handle is to be allocated
+ @param Protocol The protocol to add to the handle
+ @param InterfaceType Indicates whether Interface is supplied in
+ native form.
+ @param Interface The interface for the protocol being added
+ @param Notify indicates whether notify the notification list
+ for this protocol
+
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_OUT_OF_RESOURCES No enough buffer to allocate
+ @retval EFI_SUCCESS Protocol interface successfully installed
+
+**/
+EFI_STATUS
+MmInstallProtocolInterfaceNotify (
+ IN OUT EFI_HANDLE *UserHandle,
+ IN EFI_GUID *Protocol,
+ IN EFI_INTERFACE_TYPE InterfaceType,
+ IN VOID *Interface,
+ IN BOOLEAN Notify
+ )
+{
+ PROTOCOL_INTERFACE *Prot;
+ PROTOCOL_ENTRY *ProtEntry;
+ IHANDLE *Handle;
+ EFI_STATUS Status;
+ VOID *ExistingInterface;
+
+ //
+ // returns EFI_INVALID_PARAMETER if InterfaceType is invalid.
+ // Also added check for invalid UserHandle and Protocol pointers.
+ //
+ if (UserHandle == NULL || Protocol == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (InterfaceType != EFI_NATIVE_INTERFACE) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Print debug message
+ //
+ DEBUG((DEBUG_LOAD | DEBUG_INFO, "MmInstallProtocolInterface: %g %p\n", Protocol, Interface));
+
+ Status = EFI_OUT_OF_RESOURCES;
+ Prot = NULL;
+ Handle = NULL;
+
+ if (*UserHandle != NULL) {
+ Status = MmHandleProtocol (*UserHandle, Protocol, (VOID **)&ExistingInterface);
+ if (!EFI_ERROR (Status)) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ //
+ // Lookup the Protocol Entry for the requested protocol
+ //
+ ProtEntry = MmFindProtocolEntry (Protocol, TRUE);
+ if (ProtEntry == NULL) {
+ goto Done;
+ }
+
+ //
+ // Allocate a new protocol interface structure
+ //
+ Prot = AllocateZeroPool (sizeof(PROTOCOL_INTERFACE));
+ if (Prot == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ //
+ // If caller didn't supply a handle, allocate a new one
+ //
+ Handle = (IHANDLE *)*UserHandle;
+ if (Handle == NULL) {
+ Handle = AllocateZeroPool (sizeof(IHANDLE));
+ if (Handle == NULL) {
+ Status = EFI_OUT_OF_RESOURCES;
+ goto Done;
+ }
+
+ //
+ // Initialize new handler structure
+ //
+ Handle->Signature = EFI_HANDLE_SIGNATURE;
+ InitializeListHead (&Handle->Protocols);
+
+ //
+ // Add this handle to the list global list of all handles
+ // in the system
+ //
+ InsertTailList (&gHandleList, &Handle->AllHandles);
+ }
+
+ Status = MmValidateHandle (Handle);
+ if (EFI_ERROR (Status)) {
+ goto Done;
+ }
+
+ //
+ // Each interface that is added must be unique
+ //
+ ASSERT (MmFindProtocolInterface (Handle, Protocol, Interface) == NULL);
+
+ //
+ // Initialize the protocol interface structure
+ //
+ Prot->Signature = PROTOCOL_INTERFACE_SIGNATURE;
+ Prot->Handle = Handle;
+ Prot->Protocol = ProtEntry;
+ Prot->Interface = Interface;
+
+ //
+ // Add this protocol interface to the head of the supported
+ // protocol list for this handle
+ //
+ InsertHeadList (&Handle->Protocols, &Prot->Link);
+
+ //
+ // Add this protocol interface to the tail of the
+ // protocol entry
+ //
+ InsertTailList (&ProtEntry->Protocols, &Prot->ByProtocol);
+
+ //
+ // Notify the notification list for this protocol
+ //
+ if (Notify) {
+ MmNotifyProtocol (Prot);
+ }
+ Status = EFI_SUCCESS;
+
+Done:
+ if (!EFI_ERROR (Status)) {
+ //
+ // Return the new handle back to the caller
+ //
+ *UserHandle = Handle;
+ } else {
+ //
+ // There was an error, clean up
+ //
+ if (Prot != NULL) {
+ FreePool (Prot);
+ }
+ }
+ return Status;
+}
+
+/**
+ Uninstalls all instances of a protocol:interfacer from a handle.
+ If the last protocol interface is remove from the handle, the
+ handle is freed.
+
+ @param UserHandle The handle to remove the protocol handler from
+ @param Protocol The protocol, of protocol:interface, to remove
+ @param Interface The interface, of protocol:interface, to remove
+
+ @retval EFI_INVALID_PARAMETER Protocol is NULL.
+ @retval EFI_SUCCESS Protocol interface successfully uninstalled.
+
+**/
+EFI_STATUS
+EFIAPI
+MmUninstallProtocolInterface (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ )
+{
+ EFI_STATUS Status;
+ IHANDLE *Handle;
+ PROTOCOL_INTERFACE *Prot;
+
+ //
+ // Check that Protocol is valid
+ //
+ if (Protocol == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check that UserHandle is a valid handle
+ //
+ Status = MmValidateHandle (UserHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Check that Protocol exists on UserHandle, and Interface matches the interface in the database
+ //
+ Prot = MmFindProtocolInterface (UserHandle, Protocol, Interface);
+ if (Prot == NULL) {
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Remove the protocol interface from the protocol
+ //
+ Status = EFI_NOT_FOUND;
+ Handle = (IHANDLE *)UserHandle;
+ Prot = MmRemoveInterfaceFromProtocol (Handle, Protocol, Interface);
+
+ if (Prot != NULL) {
+ //
+ // Remove the protocol interface from the handle
+ //
+ RemoveEntryList (&Prot->Link);
+
+ //
+ // Free the memory
+ //
+ Prot->Signature = 0;
+ FreePool (Prot);
+ Status = EFI_SUCCESS;
+ }
+
+ //
+ // If there are no more handlers for the handle, free the handle
+ //
+ if (IsListEmpty (&Handle->Protocols)) {
+ Handle->Signature = 0;
+ RemoveEntryList (&Handle->AllHandles);
+ FreePool (Handle);
+ }
+ return Status;
+}
+
+/**
+ Locate a certain GUID protocol interface in a Handle's protocols.
+
+ @param UserHandle The handle to obtain the protocol interface on
+ @param Protocol The GUID of the protocol
+
+ @return The requested protocol interface for the handle
+
+**/
+PROTOCOL_INTERFACE *
+MmGetProtocolInterface (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol
+ )
+{
+ EFI_STATUS Status;
+ PROTOCOL_ENTRY *ProtEntry;
+ PROTOCOL_INTERFACE *Prot;
+ IHANDLE *Handle;
+ LIST_ENTRY *Link;
+
+ Status = MmValidateHandle (UserHandle);
+ if (EFI_ERROR (Status)) {
+ return NULL;
+ }
+
+ Handle = (IHANDLE *)UserHandle;
+
+ //
+ // Look at each protocol interface for a match
+ //
+ for (Link = Handle->Protocols.ForwardLink; Link != &Handle->Protocols; Link = Link->ForwardLink) {
+ Prot = CR(Link, PROTOCOL_INTERFACE, Link, PROTOCOL_INTERFACE_SIGNATURE);
+ ProtEntry = Prot->Protocol;
+ if (CompareGuid (&ProtEntry->ProtocolID, Protocol)) {
+ return Prot;
+ }
+ }
+ return NULL;
+}
+
+/**
+ Queries a handle to determine if it supports a specified protocol.
+
+ @param UserHandle The handle being queried.
+ @param Protocol The published unique identifier of the protocol.
+ @param Interface Supplies the address where a pointer to the
+ corresponding Protocol Interface is returned.
+
+ @retval EFI_SUCCESS The interface information for the specified protocol was returned.
+ @retval EFI_UNSUPPORTED The device does not support the specified protocol.
+ @retval EFI_INVALID_PARAMETER Handle is not a valid EFI_HANDLE..
+ @retval EFI_INVALID_PARAMETER Protocol is NULL.
+ @retval EFI_INVALID_PARAMETER Interface is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MmHandleProtocol (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ OUT VOID **Interface
+ )
+{
+ EFI_STATUS Status;
+ PROTOCOL_INTERFACE *Prot;
+
+ //
+ // Check for invalid Protocol
+ //
+ if (Protocol == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // Check for invalid Interface
+ //
+ if (Interface == NULL) {
+ return EFI_INVALID_PARAMETER;
+ } else {
+ *Interface = NULL;
+ }
+
+ //
+ // Check for invalid UserHandle
+ //
+ Status = MmValidateHandle (UserHandle);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ //
+ // Look at each protocol interface for a match
+ //
+ Prot = MmGetProtocolInterface (UserHandle, Protocol);
+ if (Prot == NULL) {
+ return EFI_UNSUPPORTED;
+ }
+
+ //
+ // This is the protocol interface entry for this protocol
+ //
+ *Interface = Prot->Interface;
+
+ return EFI_SUCCESS;
+}
diff --git a/StandaloneMmPkg/Core/InstallConfigurationTable.c b/StandaloneMmPkg/Core/InstallConfigurationTable.c
new file mode 100644
index 0000000000..3a31c63f94
--- /dev/null
+++ b/StandaloneMmPkg/Core/InstallConfigurationTable.c
@@ -0,0 +1,178 @@
+/** @file
+ System Management System Table Services MmInstallConfigurationTable service
+
+ Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+#define CONFIG_TABLE_SIZE_INCREASED 0x10
+
+UINTN mMmSystemTableAllocateSize = 0;
+
+/**
+ The MmInstallConfigurationTable() function is used to maintain the list
+ of configuration tables that are stored in the System Management System
+ Table. The list is stored as an array of (GUID, Pointer) pairs. The list
+ must be allocated from pool memory with PoolType set to EfiRuntimeServicesData.
+
+ @param SystemTable A pointer to the SMM System Table (SMST).
+ @param Guid A pointer to the GUID for the entry to add, update, or remove.
+ @param Table A pointer to the buffer of the table to add.
+ @param TableSize The size of the table to install.
+
+ @retval EFI_SUCCESS The (Guid, Table) pair was added, updated, or removed.
+ @retval EFI_INVALID_PARAMETER Guid is not valid.
+ @retval EFI_NOT_FOUND An attempt was made to delete a non-existent entry.
+ @retval EFI_OUT_OF_RESOURCES There is not enough memory available to complete the operation.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInstallConfigurationTable (
+ IN CONST EFI_MM_SYSTEM_TABLE *SystemTable,
+ IN CONST EFI_GUID *Guid,
+ IN VOID *Table,
+ IN UINTN TableSize
+ )
+{
+ UINTN Index;
+ EFI_CONFIGURATION_TABLE *ConfigurationTable;
+ EFI_CONFIGURATION_TABLE *OldTable;
+
+ //
+ // If Guid is NULL, then this operation cannot be performed
+ //
+ if (Guid == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ ConfigurationTable = gMmCoreMmst.MmConfigurationTable;
+
+ //
+ // Search all the table for an entry that matches Guid
+ //
+ for (Index = 0; Index < gMmCoreMmst.NumberOfTableEntries; Index++) {
+ if (CompareGuid (Guid, &(ConfigurationTable[Index].VendorGuid))) {
+ break;
+ }
+ }
+
+ if (Index < gMmCoreMmst.NumberOfTableEntries) {
+ //
+ // A match was found, so this is either a modify or a delete operation
+ //
+ if (Table != NULL) {
+ //
+ // If Table is not NULL, then this is a modify operation.
+ // Modify the table entry and return.
+ //
+ ConfigurationTable[Index].VendorTable = Table;
+ return EFI_SUCCESS;
+ }
+
+ //
+ // A match was found and Table is NULL, so this is a delete operation.
+ //
+ gMmCoreMmst.NumberOfTableEntries--;
+
+ //
+ // Copy over deleted entry
+ //
+ CopyMem (
+ &(ConfigurationTable[Index]),
+ &(ConfigurationTable[Index + 1]),
+ (gMmCoreMmst.NumberOfTableEntries - Index) * sizeof (EFI_CONFIGURATION_TABLE)
+ );
+
+ } else {
+ //
+ // No matching GUIDs were found, so this is an add operation.
+ //
+ if (Table == NULL) {
+ //
+ // If Table is NULL on an add operation, then return an error.
+ //
+ return EFI_NOT_FOUND;
+ }
+
+ //
+ // Assume that Index == gMmCoreMmst.NumberOfTableEntries
+ //
+ if ((Index * sizeof (EFI_CONFIGURATION_TABLE)) >= mMmSystemTableAllocateSize) {
+ //
+ // Allocate a table with one additional entry.
+ //
+ mMmSystemTableAllocateSize += (CONFIG_TABLE_SIZE_INCREASED * sizeof (EFI_CONFIGURATION_TABLE));
+ ConfigurationTable = AllocatePool (mMmSystemTableAllocateSize);
+ if (ConfigurationTable == NULL) {
+ //
+ // If a new table could not be allocated, then return an error.
+ //
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ if (gMmCoreMmst.MmConfigurationTable != NULL) {
+ //
+ // Copy the old table to the new table.
+ //
+ CopyMem (
+ ConfigurationTable,
+ gMmCoreMmst.MmConfigurationTable,
+ Index * sizeof (EFI_CONFIGURATION_TABLE)
+ );
+
+ //
+ // Record the old table pointer.
+ //
+ OldTable = gMmCoreMmst.MmConfigurationTable;
+
+ //
+ // As the MmInstallConfigurationTable() may be re-entered by FreePool() in
+ // its calling stack, updating System table to the new table pointer must
+ // be done before calling FreePool() to free the old table.
+ // It can make sure the gMmCoreMmst.MmConfigurationTable point to the new
+ // table and avoid the errors of use-after-free to the old table by the
+ // reenter of MmInstallConfigurationTable() in FreePool()'s calling stack.
+ //
+ gMmCoreMmst.MmConfigurationTable = ConfigurationTable;
+
+ //
+ // Free the old table after updating System Table to the new table pointer.
+ //
+ FreePool (OldTable);
+ } else {
+ //
+ // Update System Table
+ //
+ gMmCoreMmst.MmConfigurationTable = ConfigurationTable;
+ }
+ }
+
+ //
+ // Fill in the new entry
+ //
+ CopyGuid ((VOID *)&ConfigurationTable[Index].VendorGuid, Guid);
+ ConfigurationTable[Index].VendorTable = Table;
+
+ //
+ // This is an add operation, so increment the number of table entries
+ //
+ gMmCoreMmst.NumberOfTableEntries++;
+ }
+
+ //
+ // CRC-32 field is ignorable for SMM System Table and should be set to zero
+ //
+
+ return EFI_SUCCESS;
+}
diff --git a/StandaloneMmPkg/Core/Locate.c b/StandaloneMmPkg/Core/Locate.c
new file mode 100644
index 0000000000..6a90575f99
--- /dev/null
+++ b/StandaloneMmPkg/Core/Locate.c
@@ -0,0 +1,496 @@
+/** @file
+ Locate handle functions
+
+ Copyright (c) 2009 - 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+//
+// ProtocolRequest - Last LocateHandle request ID
+//
+UINTN mEfiLocateHandleRequest = 0;
+
+//
+// Internal prototypes
+//
+
+typedef struct {
+ EFI_GUID *Protocol;
+ VOID *SearchKey;
+ LIST_ENTRY *Position;
+ PROTOCOL_ENTRY *ProtEntry;
+} LOCATE_POSITION;
+
+typedef
+IHANDLE *
+(* CORE_GET_NEXT) (
+ IN OUT LOCATE_POSITION *Position,
+ OUT VOID **Interface
+ );
+
+/**
+ Routine to get the next Handle, when you are searching for all handles.
+
+ @param Position Information about which Handle to seach for.
+ @param Interface Return the interface structure for the matching
+ protocol.
+
+ @return An pointer to IHANDLE if the next Position is not the end of the list.
+ Otherwise,NULL is returned.
+
+**/
+IHANDLE *
+MmGetNextLocateAllHandles (
+ IN OUT LOCATE_POSITION *Position,
+ OUT VOID **Interface
+ )
+{
+ IHANDLE *Handle;
+
+ //
+ // Next handle
+ //
+ Position->Position = Position->Position->ForwardLink;
+
+ //
+ // If not at the end of the list, get the handle
+ //
+ Handle = NULL;
+ *Interface = NULL;
+ if (Position->Position != &gHandleList) {
+ Handle = CR (Position->Position, IHANDLE, AllHandles, EFI_HANDLE_SIGNATURE);
+ }
+ return Handle;
+}
+
+/**
+ Routine to get the next Handle, when you are searching for register protocol
+ notifies.
+
+ @param Position Information about which Handle to seach for.
+ @param Interface Return the interface structure for the matching
+ protocol.
+
+ @return An pointer to IHANDLE if the next Position is not the end of the list.
+ Otherwise,NULL is returned.
+
+**/
+IHANDLE *
+MmGetNextLocateByRegisterNotify (
+ IN OUT LOCATE_POSITION *Position,
+ OUT VOID **Interface
+ )
+{
+ IHANDLE *Handle;
+ PROTOCOL_NOTIFY *ProtNotify;
+ PROTOCOL_INTERFACE *Prot;
+ LIST_ENTRY *Link;
+
+ Handle = NULL;
+ *Interface = NULL;
+ ProtNotify = Position->SearchKey;
+
+ //
+ // If this is the first request, get the next handle
+ //
+ if (ProtNotify != NULL) {
+ ASSERT(ProtNotify->Signature == PROTOCOL_NOTIFY_SIGNATURE);
+ Position->SearchKey = NULL;
+
+ //
+ // If not at the end of the list, get the next handle
+ //
+ Link = ProtNotify->Position->ForwardLink;
+ if (Link != &ProtNotify->Protocol->Protocols) {
+ Prot = CR (Link, PROTOCOL_INTERFACE, ByProtocol, PROTOCOL_INTERFACE_SIGNATURE);
+ Handle = Prot->Handle;
+ *Interface = Prot->Interface;
+ }
+ }
+ return Handle;
+}
+
+/**
+ Routine to get the next Handle, when you are searching for a given protocol.
+
+ @param Position Information about which Handle to seach for.
+ @param Interface Return the interface structure for the matching
+ protocol.
+
+ @return An pointer to IHANDLE if the next Position is not the end of the list.
+ Otherwise,NULL is returned.
+
+**/
+IHANDLE *
+MmGetNextLocateByProtocol (
+ IN OUT LOCATE_POSITION *Position,
+ OUT VOID **Interface
+ )
+{
+ IHANDLE *Handle;
+ LIST_ENTRY *Link;
+ PROTOCOL_INTERFACE *Prot;
+
+ Handle = NULL;
+ *Interface = NULL;
+ for (; ;) {
+ //
+ // Next entry
+ //
+ Link = Position->Position->ForwardLink;
+ Position->Position = Link;
+
+ //
+ // If not at the end, return the handle
+ //
+ if (Link == &Position->ProtEntry->Protocols) {
+ Handle = NULL;
+ break;
+ }
+
+ //
+ // Get the handle
+ //
+ Prot = CR(Link, PROTOCOL_INTERFACE, ByProtocol, PROTOCOL_INTERFACE_SIGNATURE);
+ Handle = Prot->Handle;
+ *Interface = Prot->Interface;
+
+ //
+ // If this handle has not been returned this request, then
+ // return it now
+ //
+ if (Handle->LocateRequest != mEfiLocateHandleRequest) {
+ Handle->LocateRequest = mEfiLocateHandleRequest;
+ break;
+ }
+ }
+ return Handle;
+}
+
+/**
+ Return the first Protocol Interface that matches the Protocol GUID. If
+ Registration is pasased in return a Protocol Instance that was just add
+ to the system. If Retistration is NULL return the first Protocol Interface
+ you find.
+
+ @param Protocol The protocol to search for
+ @param Registration Optional Registration Key returned from
+ RegisterProtocolNotify()
+ @param Interface Return the Protocol interface (instance).
+
+ @retval EFI_SUCCESS If a valid Interface is returned
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_NOT_FOUND Protocol interface not found
+
+**/
+EFI_STATUS
+EFIAPI
+MmLocateProtocol (
+ IN EFI_GUID *Protocol,
+ IN VOID *Registration OPTIONAL,
+ OUT VOID **Interface
+ )
+{
+ EFI_STATUS Status;
+ LOCATE_POSITION Position;
+ PROTOCOL_NOTIFY *ProtNotify;
+ IHANDLE *Handle;
+
+ if ((Interface == NULL) || (Protocol == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ *Interface = NULL;
+ Status = EFI_SUCCESS;
+
+ //
+ // Set initial position
+ //
+ Position.Protocol = Protocol;
+ Position.SearchKey = Registration;
+ Position.Position = &gHandleList;
+
+ mEfiLocateHandleRequest += 1;
+
+ if (Registration == NULL) {
+ //
+ // Look up the protocol entry and set the head pointer
+ //
+ Position.ProtEntry = MmFindProtocolEntry (Protocol, FALSE);
+ if (Position.ProtEntry == NULL) {
+ return EFI_NOT_FOUND;
+ }
+ Position.Position = &Position.ProtEntry->Protocols;
+
+ Handle = MmGetNextLocateByProtocol (&Position, Interface);
+ } else {
+ Handle = MmGetNextLocateByRegisterNotify (&Position, Interface);
+ }
+
+ if (Handle == NULL) {
+ Status = EFI_NOT_FOUND;
+ } else if (Registration != NULL) {
+ //
+ // If this is a search by register notify and a handle was
+ // returned, update the register notification position
+ //
+ ProtNotify = Registration;
+ ProtNotify->Position = ProtNotify->Position->ForwardLink;
+ }
+
+ return Status;
+}
+
+/**
+ Locates the requested handle(s) and returns them in Buffer.
+
+ @param SearchType The type of search to perform to locate the
+ handles
+ @param Protocol The protocol to search for
+ @param SearchKey Dependant on SearchType
+ @param BufferSize On input the size of Buffer. On output the
+ size of data returned.
+ @param Buffer The buffer to return the results in
+
+ @retval EFI_BUFFER_TOO_SMALL Buffer too small, required buffer size is
+ returned in BufferSize.
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_SUCCESS Successfully found the requested handle(s) and
+ returns them in Buffer.
+
+**/
+EFI_STATUS
+EFIAPI
+MmLocateHandle (
+ IN EFI_LOCATE_SEARCH_TYPE SearchType,
+ IN EFI_GUID *Protocol OPTIONAL,
+ IN VOID *SearchKey OPTIONAL,
+ IN OUT UINTN *BufferSize,
+ OUT EFI_HANDLE *Buffer
+ )
+{
+ EFI_STATUS Status;
+ LOCATE_POSITION Position;
+ PROTOCOL_NOTIFY *ProtNotify;
+ CORE_GET_NEXT GetNext;
+ UINTN ResultSize;
+ IHANDLE *Handle;
+ IHANDLE **ResultBuffer;
+ VOID *Interface;
+
+ if (BufferSize == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((*BufferSize > 0) && (Buffer == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ GetNext = NULL;
+
+ //
+ // Set initial position
+ //
+ Position.Protocol = Protocol;
+ Position.SearchKey = SearchKey;
+ Position.Position = &gHandleList;
+
+ ResultSize = 0;
+ ResultBuffer = (IHANDLE **) Buffer;
+ Status = EFI_SUCCESS;
+
+ //
+ // Get the search function based on type
+ //
+ switch (SearchType) {
+ case AllHandles:
+ GetNext = MmGetNextLocateAllHandles;
+ break;
+
+ case ByRegisterNotify:
+ GetNext = MmGetNextLocateByRegisterNotify;
+ //
+ // Must have SearchKey for locate ByRegisterNotify
+ //
+ if (SearchKey == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ }
+ break;
+
+ case ByProtocol:
+ GetNext = MmGetNextLocateByProtocol;
+ if (Protocol == NULL) {
+ Status = EFI_INVALID_PARAMETER;
+ break;
+ }
+ //
+ // Look up the protocol entry and set the head pointer
+ //
+ Position.ProtEntry = MmFindProtocolEntry (Protocol, FALSE);
+ if (Position.ProtEntry == NULL) {
+ Status = EFI_NOT_FOUND;
+ break;
+ }
+ Position.Position = &Position.ProtEntry->Protocols;
+ break;
+
+ default:
+ Status = EFI_INVALID_PARAMETER;
+ break;
+ }
+
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
+ //
+ // Enumerate out the matching handles
+ //
+ mEfiLocateHandleRequest += 1;
+ for (; ;) {
+ //
+ // Get the next handle. If no more handles, stop
+ //
+ Handle = GetNext (&Position, &Interface);
+ if (NULL == Handle) {
+ break;
+ }
+
+ //
+ // Increase the resulting buffer size, and if this handle
+ // fits return it
+ //
+ ResultSize += sizeof(Handle);
+ if (ResultSize <= *BufferSize) {
+ *ResultBuffer = Handle;
+ ResultBuffer += 1;
+ }
+ }
+
+ //
+ // If the result is a zero length buffer, then there were no
+ // matching handles
+ //
+ if (ResultSize == 0) {
+ Status = EFI_NOT_FOUND;
+ } else {
+ //
+ // Return the resulting buffer size. If it's larger than what
+ // was passed, then set the error code
+ //
+ if (ResultSize > *BufferSize) {
+ Status = EFI_BUFFER_TOO_SMALL;
+ }
+
+ *BufferSize = ResultSize;
+
+ if (SearchType == ByRegisterNotify && !EFI_ERROR(Status)) {
+ ASSERT (SearchKey != NULL);
+ //
+ // If this is a search by register notify and a handle was
+ // returned, update the register notification position
+ //
+ ProtNotify = SearchKey;
+ ProtNotify->Position = ProtNotify->Position->ForwardLink;
+ }
+ }
+
+ return Status;
+}
+
+/**
+ Function returns an array of handles that support the requested protocol
+ in a buffer allocated from pool. This is a version of MmLocateHandle()
+ that allocates a buffer for the caller.
+
+ @param SearchType Specifies which handle(s) are to be returned.
+ @param Protocol Provides the protocol to search by. This
+ parameter is only valid for SearchType
+ ByProtocol.
+ @param SearchKey Supplies the search key depending on the
+ SearchType.
+ @param NumberHandles The number of handles returned in Buffer.
+ @param Buffer A pointer to the buffer to return the requested
+ array of handles that support Protocol.
+
+ @retval EFI_SUCCESS The result array of handles was returned.
+ @retval EFI_NOT_FOUND No handles match the search.
+ @retval EFI_OUT_OF_RESOURCES There is not enough pool memory to store the
+ matching results.
+ @retval EFI_INVALID_PARAMETER One or more parameters are not valid.
+
+**/
+EFI_STATUS
+EFIAPI
+MmLocateHandleBuffer (
+ IN EFI_LOCATE_SEARCH_TYPE SearchType,
+ IN EFI_GUID *Protocol OPTIONAL,
+ IN VOID *SearchKey OPTIONAL,
+ IN OUT UINTN *NumberHandles,
+ OUT EFI_HANDLE **Buffer
+ )
+{
+ EFI_STATUS Status;
+ UINTN BufferSize;
+
+ if (NumberHandles == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ BufferSize = 0;
+ *NumberHandles = 0;
+ *Buffer = NULL;
+ Status = MmLocateHandle (
+ SearchType,
+ Protocol,
+ SearchKey,
+ &BufferSize,
+ *Buffer
+ );
+ //
+ // LocateHandleBuffer() returns incorrect status code if SearchType is
+ // invalid.
+ //
+ // Add code to correctly handle expected errors from MmLocateHandle().
+ //
+ if (EFI_ERROR(Status) && Status != EFI_BUFFER_TOO_SMALL) {
+ if (Status != EFI_INVALID_PARAMETER) {
+ Status = EFI_NOT_FOUND;
+ }
+ return Status;
+ }
+
+ *Buffer = AllocatePool (BufferSize);
+ if (*Buffer == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ Status = MmLocateHandle (
+ SearchType,
+ Protocol,
+ SearchKey,
+ &BufferSize,
+ *Buffer
+ );
+
+ *NumberHandles = BufferSize / sizeof(EFI_HANDLE);
+ if (EFI_ERROR(Status)) {
+ *NumberHandles = 0;
+ }
+
+ return Status;
+}
diff --git a/StandaloneMmPkg/Core/Mmi.c b/StandaloneMmPkg/Core/Mmi.c
new file mode 100644
index 0000000000..29aba7b53d
--- /dev/null
+++ b/StandaloneMmPkg/Core/Mmi.c
@@ -0,0 +1,337 @@
+/** @file
+ MMI management.
+
+ Copyright (c) 2009 - 2013, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+//
+// MM_HANDLER_STATE_NOTIFIER
+//
+
+//
+// MM_HANDLER - used for each MM handler
+//
+
+#define MMI_ENTRY_SIGNATURE SIGNATURE_32('m','m','i','e')
+
+ typedef struct {
+ UINTN Signature;
+ LIST_ENTRY AllEntries; // All entries
+
+ EFI_GUID HandlerType; // Type of interrupt
+ LIST_ENTRY MmiHandlers; // All handlers
+} MMI_ENTRY;
+
+#define MMI_HANDLER_SIGNATURE SIGNATURE_32('m','m','i','h')
+
+ typedef struct {
+ UINTN Signature;
+ LIST_ENTRY Link; // Link on MMI_ENTRY.MmiHandlers
+ EFI_MM_HANDLER_ENTRY_POINT Handler; // The mm handler's entry point
+ MMI_ENTRY *MmiEntry;
+} MMI_HANDLER;
+
+LIST_ENTRY mRootMmiHandlerList = INITIALIZE_LIST_HEAD_VARIABLE (mRootMmiHandlerList);
+LIST_ENTRY mMmiEntryList = INITIALIZE_LIST_HEAD_VARIABLE (mMmiEntryList);
+
+/**
+ Finds the MMI entry for the requested handler type.
+
+ @param HandlerType The type of the interrupt
+ @param Create Create a new entry if not found
+
+ @return MMI entry
+
+**/
+MMI_ENTRY *
+EFIAPI
+MmCoreFindMmiEntry (
+ IN EFI_GUID *HandlerType,
+ IN BOOLEAN Create
+ )
+{
+ LIST_ENTRY *Link;
+ MMI_ENTRY *Item;
+ MMI_ENTRY *MmiEntry;
+
+ //
+ // Search the MMI entry list for the matching GUID
+ //
+ MmiEntry = NULL;
+ for (Link = mMmiEntryList.ForwardLink;
+ Link != &mMmiEntryList;
+ Link = Link->ForwardLink) {
+
+ Item = CR (Link, MMI_ENTRY, AllEntries, MMI_ENTRY_SIGNATURE);
+ if (CompareGuid (&Item->HandlerType, HandlerType)) {
+ //
+ // This is the MMI entry
+ //
+ MmiEntry = Item;
+ break;
+ }
+ }
+
+ //
+ // If the protocol entry was not found and Create is TRUE, then
+ // allocate a new entry
+ //
+ if ((MmiEntry == NULL) && Create) {
+ MmiEntry = AllocatePool (sizeof(MMI_ENTRY));
+ if (MmiEntry != NULL) {
+ //
+ // Initialize new MMI entry structure
+ //
+ MmiEntry->Signature = MMI_ENTRY_SIGNATURE;
+ CopyGuid ((VOID *)&MmiEntry->HandlerType, HandlerType);
+ InitializeListHead (&MmiEntry->MmiHandlers);
+
+ //
+ // Add it to MMI entry list
+ //
+ InsertTailList (&mMmiEntryList, &MmiEntry->AllEntries);
+ }
+ }
+ return MmiEntry;
+}
+
+/**
+ Manage MMI of a particular type.
+
+ @param HandlerType Points to the handler type or NULL for root MMI handlers.
+ @param Context Points to an optional context buffer.
+ @param CommBuffer Points to the optional communication buffer.
+ @param CommBufferSize Points to the size of the optional communication buffer.
+
+ @retval EFI_WARN_INTERRUPT_SOURCE_PENDING Interrupt source was processed successfully but not quiesced.
+ @retval EFI_INTERRUPT_PENDING One or more MMI sources could not be quiesced.
+ @retval EFI_NOT_FOUND Interrupt source was not handled or quiesced.
+ @retval EFI_SUCCESS Interrupt source was handled and quiesced.
+
+**/
+EFI_STATUS
+EFIAPI
+MmiManage (
+ IN CONST EFI_GUID *HandlerType,
+ IN CONST VOID *Context OPTIONAL,
+ IN OUT VOID *CommBuffer OPTIONAL,
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ )
+{
+ LIST_ENTRY *Link;
+ LIST_ENTRY *Head;
+ MMI_ENTRY *MmiEntry;
+ MMI_HANDLER *MmiHandler;
+ BOOLEAN SuccessReturn;
+ EFI_STATUS Status;
+
+ Status = EFI_NOT_FOUND;
+ SuccessReturn = FALSE;
+ if (HandlerType == NULL) {
+ //
+ // Root MMI handler
+ //
+
+ Head = &mRootMmiHandlerList;
+ } else {
+ //
+ // Non-root MMI handler
+ //
+ MmiEntry = MmCoreFindMmiEntry ((EFI_GUID *) HandlerType, FALSE);
+ if (MmiEntry == NULL) {
+ //
+ // There is no handler registered for this interrupt source
+ //
+ return Status;
+ }
+
+ Head = &MmiEntry->MmiHandlers;
+ }
+
+ for (Link = Head->ForwardLink; Link != Head; Link = Link->ForwardLink) {
+ MmiHandler = CR (Link, MMI_HANDLER, Link, MMI_HANDLER_SIGNATURE);
+
+ Status = MmiHandler->Handler (
+ (EFI_HANDLE) MmiHandler,
+ Context,
+ CommBuffer,
+ CommBufferSize
+ );
+
+ switch (Status) {
+ case EFI_INTERRUPT_PENDING:
+ //
+ // If a handler returns EFI_INTERRUPT_PENDING and HandlerType is not NULL then
+ // no additional handlers will be processed and EFI_INTERRUPT_PENDING will be returned.
+ //
+ if (HandlerType != NULL) {
+ return EFI_INTERRUPT_PENDING;
+ }
+ break;
+
+ case EFI_SUCCESS:
+ //
+ // If at least one of the handlers returns EFI_SUCCESS then the function will return
+ // EFI_SUCCESS. If a handler returns EFI_SUCCESS and HandlerType is not NULL then no
+ // additional handlers will be processed.
+ //
+ if (HandlerType != NULL) {
+ return EFI_SUCCESS;
+ }
+ SuccessReturn = TRUE;
+ break;
+
+ case EFI_WARN_INTERRUPT_SOURCE_QUIESCED:
+ //
+ // If at least one of the handlers returns EFI_WARN_INTERRUPT_SOURCE_QUIESCED
+ // then the function will return EFI_SUCCESS.
+ //
+ SuccessReturn = TRUE;
+ break;
+
+ case EFI_WARN_INTERRUPT_SOURCE_PENDING:
+ //
+ // If all the handlers returned EFI_WARN_INTERRUPT_SOURCE_PENDING
+ // then EFI_WARN_INTERRUPT_SOURCE_PENDING will be returned.
+ //
+ break;
+
+ default:
+ //
+ // Unexpected status code returned.
+ //
+ ASSERT (FALSE);
+ break;
+ }
+ }
+
+ if (SuccessReturn) {
+ Status = EFI_SUCCESS;
+ }
+
+ return Status;
+}
+
+/**
+ Registers a handler to execute within MM.
+
+ @param Handler Handler service funtion pointer.
+ @param HandlerType Points to the handler type or NULL for root MMI handlers.
+ @param DispatchHandle On return, contains a unique handle which can be used to later unregister the handler function.
+
+ @retval EFI_SUCCESS Handler register success.
+ @retval EFI_INVALID_PARAMETER Handler or DispatchHandle is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MmiHandlerRegister (
+ IN EFI_MM_HANDLER_ENTRY_POINT Handler,
+ IN CONST EFI_GUID *HandlerType OPTIONAL,
+ OUT EFI_HANDLE *DispatchHandle
+ )
+{
+ MMI_HANDLER *MmiHandler;
+ MMI_ENTRY *MmiEntry;
+ LIST_ENTRY *List;
+
+ if (Handler == NULL || DispatchHandle == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ MmiHandler = AllocateZeroPool (sizeof (MMI_HANDLER));
+ if (MmiHandler == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ MmiHandler->Signature = MMI_HANDLER_SIGNATURE;
+ MmiHandler->Handler = Handler;
+
+ if (HandlerType == NULL) {
+ //
+ // This is root MMI handler
+ //
+ MmiEntry = NULL;
+ List = &mRootMmiHandlerList;
+ } else {
+ //
+ // None root MMI handler
+ //
+ MmiEntry = MmCoreFindMmiEntry ((EFI_GUID *) HandlerType, TRUE);
+ if (MmiEntry == NULL) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ List = &MmiEntry->MmiHandlers;
+ }
+
+ MmiHandler->MmiEntry = MmiEntry;
+ InsertTailList (List, &MmiHandler->Link);
+
+ *DispatchHandle = (EFI_HANDLE) MmiHandler;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Unregister a handler in MM.
+
+ @param DispatchHandle The handle that was specified when the handler was registered.
+
+ @retval EFI_SUCCESS Handler function was successfully unregistered.
+ @retval EFI_INVALID_PARAMETER DispatchHandle does not refer to a valid handle.
+
+**/
+EFI_STATUS
+EFIAPI
+MmiHandlerUnRegister (
+ IN EFI_HANDLE DispatchHandle
+ )
+{
+ MMI_HANDLER *MmiHandler;
+ MMI_ENTRY *MmiEntry;
+
+ MmiHandler = (MMI_HANDLER *) DispatchHandle;
+
+ if (MmiHandler == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (MmiHandler->Signature != MMI_HANDLER_SIGNATURE) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ MmiEntry = MmiHandler->MmiEntry;
+
+ RemoveEntryList (&MmiHandler->Link);
+ FreePool (MmiHandler);
+
+ if (MmiEntry == NULL) {
+ //
+ // This is root MMI handler
+ //
+ return EFI_SUCCESS;
+ }
+
+ if (IsListEmpty (&MmiEntry->MmiHandlers)) {
+ //
+ // No handler registered for this interrupt now, remove the MMI_ENTRY
+ //
+ RemoveEntryList (&MmiEntry->AllEntries);
+
+ FreePool (MmiEntry);
+ }
+
+ return EFI_SUCCESS;
+}
diff --git a/StandaloneMmPkg/Core/Notify.c b/StandaloneMmPkg/Core/Notify.c
new file mode 100644
index 0000000000..1861497ffc
--- /dev/null
+++ b/StandaloneMmPkg/Core/Notify.c
@@ -0,0 +1,203 @@
+/** @file
+ Support functions for UEFI protocol notification infrastructure.
+
+ Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+/**
+ Signal event for every protocol in protocol entry.
+
+ @param Prot Protocol interface
+
+**/
+VOID
+MmNotifyProtocol (
+ IN PROTOCOL_INTERFACE *Prot
+ )
+{
+ PROTOCOL_ENTRY *ProtEntry;
+ PROTOCOL_NOTIFY *ProtNotify;
+ LIST_ENTRY *Link;
+
+ ProtEntry = Prot->Protocol;
+ for (Link=ProtEntry->Notify.ForwardLink; Link != &ProtEntry->Notify; Link=Link->ForwardLink) {
+ ProtNotify = CR(Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE);
+ ProtNotify->Function (&ProtEntry->ProtocolID, Prot->Interface, Prot->Handle);
+ }
+}
+
+/**
+ Removes Protocol from the protocol list (but not the handle list).
+
+ @param Handle The handle to remove protocol on.
+ @param Protocol GUID of the protocol to be moved
+ @param Interface The interface of the protocol
+
+ @return Protocol Entry
+
+**/
+PROTOCOL_INTERFACE *
+MmRemoveInterfaceFromProtocol (
+ IN IHANDLE *Handle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ )
+{
+ PROTOCOL_INTERFACE *Prot;
+ PROTOCOL_NOTIFY *ProtNotify;
+ PROTOCOL_ENTRY *ProtEntry;
+ LIST_ENTRY *Link;
+
+ Prot = MmFindProtocolInterface (Handle, Protocol, Interface);
+ if (Prot != NULL) {
+
+ ProtEntry = Prot->Protocol;
+
+ //
+ // If there's a protocol notify location pointing to this entry, back it up one
+ //
+ for(Link = ProtEntry->Notify.ForwardLink; Link != &ProtEntry->Notify; Link=Link->ForwardLink) {
+ ProtNotify = CR(Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE);
+
+ if (ProtNotify->Position == &Prot->ByProtocol) {
+ ProtNotify->Position = Prot->ByProtocol.BackLink;
+ }
+ }
+
+ //
+ // Remove the protocol interface entry
+ //
+ RemoveEntryList (&Prot->ByProtocol);
+ }
+
+ return Prot;
+}
+
+/**
+ Add a new protocol notification record for the request protocol.
+
+ @param Protocol The requested protocol to add the notify
+ registration
+ @param Function Points to the notification function
+ @param Registration Returns the registration record
+
+ @retval EFI_SUCCESS Successfully returned the registration record
+ that has been added or unhooked
+ @retval EFI_INVALID_PARAMETER Protocol is NULL or Registration is NULL
+ @retval EFI_OUT_OF_RESOURCES Not enough memory resource to finish the request
+ @retval EFI_NOT_FOUND If the registration is not found when Function == NULL
+
+**/
+EFI_STATUS
+EFIAPI
+MmRegisterProtocolNotify (
+ IN CONST EFI_GUID *Protocol,
+ IN EFI_MM_NOTIFY_FN Function,
+ OUT VOID **Registration
+ )
+{
+ PROTOCOL_ENTRY *ProtEntry;
+ PROTOCOL_NOTIFY *ProtNotify;
+ LIST_ENTRY *Link;
+ EFI_STATUS Status;
+
+ if (Protocol == NULL || Registration == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Function == NULL) {
+ //
+ // Get the protocol entry per Protocol
+ //
+ ProtEntry = MmFindProtocolEntry ((EFI_GUID *) Protocol, FALSE);
+ if (ProtEntry != NULL) {
+ ProtNotify = (PROTOCOL_NOTIFY * )*Registration;
+ for (Link = ProtEntry->Notify.ForwardLink;
+ Link != &ProtEntry->Notify;
+ Link = Link->ForwardLink) {
+ //
+ // Compare the notification record
+ //
+ if (ProtNotify == (CR(Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE))){
+ //
+ // If Registration is an existing registration, then unhook it
+ //
+ ProtNotify->Signature = 0;
+ RemoveEntryList (&ProtNotify->Link);
+ FreePool (ProtNotify);
+ return EFI_SUCCESS;
+ }
+ }
+ }
+ //
+ // If the registration is not found
+ //
+ return EFI_NOT_FOUND;
+ }
+
+ ProtNotify = NULL;
+
+ //
+ // Get the protocol entry to add the notification too
+ //
+ ProtEntry = MmFindProtocolEntry ((EFI_GUID *) Protocol, TRUE);
+ if (ProtEntry != NULL) {
+ //
+ // Find whether notification already exist
+ //
+ for (Link = ProtEntry->Notify.ForwardLink;
+ Link != &ProtEntry->Notify;
+ Link = Link->ForwardLink) {
+
+ ProtNotify = CR(Link, PROTOCOL_NOTIFY, Link, PROTOCOL_NOTIFY_SIGNATURE);
+ if (CompareGuid (&ProtNotify->Protocol->ProtocolID, Protocol) &&
+ (ProtNotify->Function == Function)) {
+
+ //
+ // Notification already exist
+ //
+ *Registration = ProtNotify;
+
+ return EFI_SUCCESS;
+ }
+ }
+
+ //
+ // Allocate a new notification record
+ //
+ ProtNotify = AllocatePool (sizeof(PROTOCOL_NOTIFY));
+ if (ProtNotify != NULL) {
+ ProtNotify->Signature = PROTOCOL_NOTIFY_SIGNATURE;
+ ProtNotify->Protocol = ProtEntry;
+ ProtNotify->Function = Function;
+ //
+ // Start at the ending
+ //
+ ProtNotify->Position = ProtEntry->Protocols.BackLink;
+
+ InsertTailList (&ProtEntry->Notify, &ProtNotify->Link);
+ }
+ }
+
+ //
+ // Done. If we have a protocol notify entry, then return it.
+ // Otherwise, we must have run out of resources trying to add one
+ //
+ Status = EFI_OUT_OF_RESOURCES;
+ if (ProtNotify != NULL) {
+ *Registration = ProtNotify;
+ Status = EFI_SUCCESS;
+ }
+ return Status;
+}
diff --git a/StandaloneMmPkg/Core/Page.c b/StandaloneMmPkg/Core/Page.c
new file mode 100644
index 0000000000..ba3e7cea74
--- /dev/null
+++ b/StandaloneMmPkg/Core/Page.c
@@ -0,0 +1,384 @@
+/** @file
+ MM Memory page management functions.
+
+ Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+#define NEXT_MEMORY_DESCRIPTOR(MemoryDescriptor, Size) \
+ ((EFI_MEMORY_DESCRIPTOR *)((UINT8 *)(MemoryDescriptor) + (Size)))
+
+#define TRUNCATE_TO_PAGES(a) ((a) >> EFI_PAGE_SHIFT)
+
+LIST_ENTRY mMmMemoryMap = INITIALIZE_LIST_HEAD_VARIABLE (mMmMemoryMap);
+
+UINTN mMapKey;
+
+/**
+ Internal Function. Allocate n pages from given free page node.
+
+ @param Pages The free page node.
+ @param NumberOfPages Number of pages to be allocated.
+ @param MaxAddress Request to allocate memory below this address.
+
+ @return Memory address of allocated pages.
+
+**/
+UINTN
+InternalAllocPagesOnOneNode (
+ IN OUT FREE_PAGE_LIST *Pages,
+ IN UINTN NumberOfPages,
+ IN UINTN MaxAddress
+ )
+{
+ UINTN Top;
+ UINTN Bottom;
+ FREE_PAGE_LIST *Node;
+
+ Top = TRUNCATE_TO_PAGES (MaxAddress + 1 - (UINTN)Pages);
+ if (Top > Pages->NumberOfPages) {
+ Top = Pages->NumberOfPages;
+ }
+ Bottom = Top - NumberOfPages;
+
+ if (Top < Pages->NumberOfPages) {
+ Node = (FREE_PAGE_LIST*)((UINTN)Pages + EFI_PAGES_TO_SIZE (Top));
+ Node->NumberOfPages = Pages->NumberOfPages - Top;
+ InsertHeadList (&Pages->Link, &Node->Link);
+ }
+
+ if (Bottom > 0) {
+ Pages->NumberOfPages = Bottom;
+ } else {
+ RemoveEntryList (&Pages->Link);
+ }
+
+ return (UINTN)Pages + EFI_PAGES_TO_SIZE (Bottom);
+}
+
+/**
+ Internal Function. Allocate n pages from free page list below MaxAddress.
+
+ @param FreePageList The free page node.
+ @param NumberOfPages Number of pages to be allocated.
+ @param MaxAddress Request to allocate memory below this address.
+
+ @return Memory address of allocated pages.
+
+**/
+UINTN
+InternalAllocMaxAddress (
+ IN OUT LIST_ENTRY *FreePageList,
+ IN UINTN NumberOfPages,
+ IN UINTN MaxAddress
+ )
+{
+ LIST_ENTRY *Node;
+ FREE_PAGE_LIST *Pages;
+
+ for (Node = FreePageList->BackLink; Node != FreePageList; Node = Node->BackLink) {
+ Pages = BASE_CR (Node, FREE_PAGE_LIST, Link);
+ if (Pages->NumberOfPages >= NumberOfPages &&
+ (UINTN)Pages + EFI_PAGES_TO_SIZE (NumberOfPages) - 1 <= MaxAddress) {
+ return InternalAllocPagesOnOneNode (Pages, NumberOfPages, MaxAddress);
+ }
+ }
+ return (UINTN)(-1);
+}
+
+/**
+ Internal Function. Allocate n pages from free page list at given address.
+
+ @param FreePageList The free page node.
+ @param NumberOfPages Number of pages to be allocated.
+ @param MaxAddress Request to allocate memory below this address.
+
+ @return Memory address of allocated pages.
+
+**/
+UINTN
+InternalAllocAddress (
+ IN OUT LIST_ENTRY *FreePageList,
+ IN UINTN NumberOfPages,
+ IN UINTN Address
+ )
+{
+ UINTN EndAddress;
+ LIST_ENTRY *Node;
+ FREE_PAGE_LIST *Pages;
+
+ if ((Address & EFI_PAGE_MASK) != 0) {
+ return ~Address;
+ }
+
+ EndAddress = Address + EFI_PAGES_TO_SIZE (NumberOfPages);
+ for (Node = FreePageList->BackLink; Node!= FreePageList; Node = Node->BackLink) {
+ Pages = BASE_CR (Node, FREE_PAGE_LIST, Link);
+ if ((UINTN)Pages <= Address) {
+ if ((UINTN)Pages + EFI_PAGES_TO_SIZE (Pages->NumberOfPages) < EndAddress) {
+ break;
+ }
+ return InternalAllocPagesOnOneNode (Pages, NumberOfPages, EndAddress);
+ }
+ }
+ return ~Address;
+}
+
+/**
+ Allocates pages from the memory map.
+
+ @param Type The type of allocation to perform.
+ @param MemoryType The type of memory to turn the allocated pages
+ into.
+ @param NumberOfPages The number of pages to allocate.
+ @param Memory A pointer to receive the base allocated memory
+ address.
+
+ @retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in spec.
+ @retval EFI_NOT_FOUND Could not allocate pages match the requirement.
+ @retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
+ @retval EFI_SUCCESS Pages successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInternalAllocatePages (
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN NumberOfPages,
+ OUT EFI_PHYSICAL_ADDRESS *Memory
+ )
+{
+ UINTN RequestedAddress;
+
+ if (MemoryType != EfiRuntimeServicesCode &&
+ MemoryType != EfiRuntimeServicesData) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (NumberOfPages > TRUNCATE_TO_PAGES ((UINTN)-1) + 1) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // We don't track memory type in MM
+ //
+ RequestedAddress = (UINTN)*Memory;
+ switch (Type) {
+ case AllocateAnyPages:
+ RequestedAddress = (UINTN)(-1);
+ case AllocateMaxAddress:
+ *Memory = InternalAllocMaxAddress (
+ &mMmMemoryMap,
+ NumberOfPages,
+ RequestedAddress
+ );
+ if (*Memory == (UINTN)-1) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ break;
+ case AllocateAddress:
+ *Memory = InternalAllocAddress (
+ &mMmMemoryMap,
+ NumberOfPages,
+ RequestedAddress
+ );
+ if (*Memory != RequestedAddress) {
+ return EFI_NOT_FOUND;
+ }
+ break;
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+ return EFI_SUCCESS;
+}
+
+/**
+ Allocates pages from the memory map.
+
+ @param Type The type of allocation to perform.
+ @param MemoryType The type of memory to turn the allocated pages
+ into.
+ @param NumberOfPages The number of pages to allocate.
+ @param Memory A pointer to receive the base allocated memory
+ address.
+
+ @retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in spec.
+ @retval EFI_NOT_FOUND Could not allocate pages match the requirement.
+ @retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
+ @retval EFI_SUCCESS Pages successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+MmAllocatePages (
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN NumberOfPages,
+ OUT EFI_PHYSICAL_ADDRESS *Memory
+ )
+{
+ EFI_STATUS Status;
+
+ Status = MmInternalAllocatePages (Type, MemoryType, NumberOfPages, Memory);
+ return Status;
+}
+
+/**
+ Internal Function. Merge two adjacent nodes.
+
+ @param First The first of two nodes to merge.
+
+ @return Pointer to node after merge (if success) or pointer to next node (if fail).
+
+**/
+FREE_PAGE_LIST *
+InternalMergeNodes (
+ IN FREE_PAGE_LIST *First
+ )
+{
+ FREE_PAGE_LIST *Next;
+
+ Next = BASE_CR (First->Link.ForwardLink, FREE_PAGE_LIST, Link);
+ ASSERT (
+ TRUNCATE_TO_PAGES ((UINTN)Next - (UINTN)First) >= First->NumberOfPages);
+
+ if (TRUNCATE_TO_PAGES ((UINTN)Next - (UINTN)First) == First->NumberOfPages) {
+ First->NumberOfPages += Next->NumberOfPages;
+ RemoveEntryList (&Next->Link);
+ Next = First;
+ }
+ return Next;
+}
+
+/**
+ Frees previous allocated pages.
+
+ @param Memory Base address of memory being freed.
+ @param NumberOfPages The number of pages to free.
+
+ @retval EFI_NOT_FOUND Could not find the entry that covers the range.
+ @retval EFI_INVALID_PARAMETER Address not aligned.
+ @return EFI_SUCCESS Pages successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInternalFreePages (
+ IN EFI_PHYSICAL_ADDRESS Memory,
+ IN UINTN NumberOfPages
+ )
+{
+ LIST_ENTRY *Node;
+ FREE_PAGE_LIST *Pages;
+
+ if ((Memory & EFI_PAGE_MASK) != 0) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Pages = NULL;
+ Node = mMmMemoryMap.ForwardLink;
+ while (Node != &mMmMemoryMap) {
+ Pages = BASE_CR (Node, FREE_PAGE_LIST, Link);
+ if (Memory < (UINTN)Pages) {
+ break;
+ }
+ Node = Node->ForwardLink;
+ }
+
+ if (Node != &mMmMemoryMap &&
+ Memory + EFI_PAGES_TO_SIZE (NumberOfPages) > (UINTN)Pages) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Node->BackLink != &mMmMemoryMap) {
+ Pages = BASE_CR (Node->BackLink, FREE_PAGE_LIST, Link);
+ if ((UINTN)Pages + EFI_PAGES_TO_SIZE (Pages->NumberOfPages) > Memory) {
+ return EFI_INVALID_PARAMETER;
+ }
+ }
+
+ Pages = (FREE_PAGE_LIST*)(UINTN)Memory;
+ Pages->NumberOfPages = NumberOfPages;
+ InsertTailList (Node, &Pages->Link);
+
+ if (Pages->Link.BackLink != &mMmMemoryMap) {
+ Pages = InternalMergeNodes (
+ BASE_CR (Pages->Link.BackLink, FREE_PAGE_LIST, Link)
+ );
+ }
+
+ if (Node != &mMmMemoryMap) {
+ InternalMergeNodes (Pages);
+ }
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Frees previous allocated pages.
+
+ @param Memory Base address of memory being freed.
+ @param NumberOfPages The number of pages to free.
+
+ @retval EFI_NOT_FOUND Could not find the entry that covers the range.
+ @retval EFI_INVALID_PARAMETER Address not aligned.
+ @return EFI_SUCCESS Pages successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+MmFreePages (
+ IN EFI_PHYSICAL_ADDRESS Memory,
+ IN UINTN NumberOfPages
+ )
+{
+ EFI_STATUS Status;
+
+ Status = MmInternalFreePages (Memory, NumberOfPages);
+ return Status;
+}
+
+/**
+ Add free MMRAM region for use by memory service.
+
+ @param MemBase Base address of memory region.
+ @param MemLength Length of the memory region.
+ @param Type Memory type.
+ @param Attributes Memory region state.
+
+**/
+VOID
+MmAddMemoryRegion (
+ IN EFI_PHYSICAL_ADDRESS MemBase,
+ IN UINT64 MemLength,
+ IN EFI_MEMORY_TYPE Type,
+ IN UINT64 Attributes
+ )
+{
+ UINTN AlignedMemBase;
+
+ //
+ // Do not add memory regions that is already allocated, needs testing, or needs ECC initialization
+ //
+ if ((Attributes & (EFI_ALLOCATED | EFI_NEEDS_TESTING | EFI_NEEDS_ECC_INITIALIZATION)) != 0) {
+ return;
+ }
+
+ //
+ // Align range on an EFI_PAGE_SIZE boundary
+ //
+ AlignedMemBase = (UINTN)(MemBase + EFI_PAGE_MASK) & ~EFI_PAGE_MASK;
+ MemLength -= AlignedMemBase - MemBase;
+ MmFreePages (AlignedMemBase, TRUNCATE_TO_PAGES ((UINTN)MemLength));
+}
diff --git a/StandaloneMmPkg/Core/Pool.c b/StandaloneMmPkg/Core/Pool.c
new file mode 100644
index 0000000000..ee201676b1
--- /dev/null
+++ b/StandaloneMmPkg/Core/Pool.c
@@ -0,0 +1,287 @@
+/** @file
+ SMM Memory pool management functions.
+
+ Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+LIST_ENTRY mMmPoolLists[MAX_POOL_INDEX];
+//
+// To cache the MMRAM base since when Loading modules At fixed address feature is enabled,
+// all module is assigned an offset relative the MMRAM base in build time.
+//
+GLOBAL_REMOVE_IF_UNREFERENCED EFI_PHYSICAL_ADDRESS gLoadModuleAtFixAddressMmramBase = 0;
+
+/**
+ Called to initialize the memory service.
+
+ @param MmramRangeCount Number of MMRAM Regions
+ @param MmramRanges Pointer to MMRAM Descriptors
+
+**/
+VOID
+MmInitializeMemoryServices (
+ IN UINTN MmramRangeCount,
+ IN EFI_MMRAM_DESCRIPTOR *MmramRanges
+ )
+{
+ UINTN Index;
+
+ //
+ // Initialize Pool list
+ //
+ for (Index = sizeof (mMmPoolLists) / sizeof (*mMmPoolLists); Index > 0;) {
+ InitializeListHead (&mMmPoolLists[--Index]);
+ }
+
+
+ //
+ // Initialize free MMRAM regions
+ //
+ for (Index = 0; Index < MmramRangeCount; Index++) {
+ //
+ // BUGBUG: Add legacy MMRAM region is buggy.
+ //
+ if (MmramRanges[Index].CpuStart < BASE_1MB) {
+ continue;
+ }
+ DEBUG ((EFI_D_INFO, "MmAddMemoryRegion %d : 0x%016lx - 0x%016lx\n", Index, MmramRanges[Index].CpuStart, MmramRanges[Index].PhysicalSize));
+ MmAddMemoryRegion (
+ MmramRanges[Index].CpuStart,
+ MmramRanges[Index].PhysicalSize,
+ EfiConventionalMemory,
+ MmramRanges[Index].RegionState
+ );
+ }
+
+}
+
+/**
+ Internal Function. Allocate a pool by specified PoolIndex.
+
+ @param PoolIndex Index which indicate the Pool size.
+ @param FreePoolHdr The returned Free pool.
+
+ @retval EFI_OUT_OF_RESOURCES Allocation failed.
+ @retval EFI_SUCCESS Pool successfully allocated.
+
+**/
+EFI_STATUS
+InternalAllocPoolByIndex (
+ IN UINTN PoolIndex,
+ OUT FREE_POOL_HEADER **FreePoolHdr
+ )
+{
+ EFI_STATUS Status;
+ FREE_POOL_HEADER *Hdr;
+ EFI_PHYSICAL_ADDRESS Address;
+
+ ASSERT (PoolIndex <= MAX_POOL_INDEX);
+ Status = EFI_SUCCESS;
+ Hdr = NULL;
+ if (PoolIndex == MAX_POOL_INDEX) {
+ Status = MmInternalAllocatePages (AllocateAnyPages, EfiRuntimeServicesData, EFI_SIZE_TO_PAGES (MAX_POOL_SIZE << 1), &Address);
+ if (EFI_ERROR (Status)) {
+ return EFI_OUT_OF_RESOURCES;
+ }
+ Hdr = (FREE_POOL_HEADER *) (UINTN) Address;
+ } else if (!IsListEmpty (&mMmPoolLists[PoolIndex])) {
+ Hdr = BASE_CR (GetFirstNode (&mMmPoolLists[PoolIndex]), FREE_POOL_HEADER, Link);
+ RemoveEntryList (&Hdr->Link);
+ } else {
+ Status = InternalAllocPoolByIndex (PoolIndex + 1, &Hdr);
+ if (!EFI_ERROR (Status)) {
+ Hdr->Header.Size >>= 1;
+ Hdr->Header.Available = TRUE;
+ InsertHeadList (&mMmPoolLists[PoolIndex], &Hdr->Link);
+ Hdr = (FREE_POOL_HEADER*)((UINT8*)Hdr + Hdr->Header.Size);
+ }
+ }
+
+ if (!EFI_ERROR (Status)) {
+ Hdr->Header.Size = MIN_POOL_SIZE << PoolIndex;
+ Hdr->Header.Available = FALSE;
+ }
+
+ *FreePoolHdr = Hdr;
+ return Status;
+}
+
+/**
+ Internal Function. Free a pool by specified PoolIndex.
+
+ @param FreePoolHdr The pool to free.
+
+ @retval EFI_SUCCESS Pool successfully freed.
+
+**/
+EFI_STATUS
+InternalFreePoolByIndex (
+ IN FREE_POOL_HEADER *FreePoolHdr
+ )
+{
+ UINTN PoolIndex;
+
+ ASSERT ((FreePoolHdr->Header.Size & (FreePoolHdr->Header.Size - 1)) == 0);
+ ASSERT (((UINTN)FreePoolHdr & (FreePoolHdr->Header.Size - 1)) == 0);
+ ASSERT (FreePoolHdr->Header.Size >= MIN_POOL_SIZE);
+
+ PoolIndex = (UINTN) (HighBitSet32 ((UINT32)FreePoolHdr->Header.Size) - MIN_POOL_SHIFT);
+ FreePoolHdr->Header.Available = TRUE;
+ ASSERT (PoolIndex < MAX_POOL_INDEX);
+ InsertHeadList (&mMmPoolLists[PoolIndex], &FreePoolHdr->Link);
+ return EFI_SUCCESS;
+}
+
+/**
+ Allocate pool of a particular type.
+
+ @param PoolType Type of pool to allocate.
+ @param Size The amount of pool to allocate.
+ @param Buffer The address to return a pointer to the allocated
+ pool.
+
+ @retval EFI_INVALID_PARAMETER PoolType not valid.
+ @retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
+ @retval EFI_SUCCESS Pool successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInternalAllocatePool (
+ IN EFI_MEMORY_TYPE PoolType,
+ IN UINTN Size,
+ OUT VOID **Buffer
+ )
+{
+ POOL_HEADER *PoolHdr;
+ FREE_POOL_HEADER *FreePoolHdr;
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS Address;
+ UINTN PoolIndex;
+
+ if (PoolType != EfiRuntimeServicesCode &&
+ PoolType != EfiRuntimeServicesData) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ Size += sizeof (*PoolHdr);
+ if (Size > MAX_POOL_SIZE) {
+ Size = EFI_SIZE_TO_PAGES (Size);
+ Status = MmInternalAllocatePages (AllocateAnyPages, PoolType, Size, &Address);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ PoolHdr = (POOL_HEADER*)(UINTN)Address;
+ PoolHdr->Size = EFI_PAGES_TO_SIZE (Size);
+ PoolHdr->Available = FALSE;
+ *Buffer = PoolHdr + 1;
+ return Status;
+ }
+
+ Size = (Size + MIN_POOL_SIZE - 1) >> MIN_POOL_SHIFT;
+ PoolIndex = (UINTN) HighBitSet32 ((UINT32)Size);
+ if ((Size & (Size - 1)) != 0) {
+ PoolIndex++;
+ }
+
+ Status = InternalAllocPoolByIndex (PoolIndex, &FreePoolHdr);
+ if (!EFI_ERROR(Status)) {
+ *Buffer = &FreePoolHdr->Header + 1;
+ }
+ return Status;
+}
+
+/**
+ Allocate pool of a particular type.
+
+ @param PoolType Type of pool to allocate.
+ @param Size The amount of pool to allocate.
+ @param Buffer The address to return a pointer to the allocated
+ pool.
+
+ @retval EFI_INVALID_PARAMETER PoolType not valid.
+ @retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
+ @retval EFI_SUCCESS Pool successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+MmAllocatePool (
+ IN EFI_MEMORY_TYPE PoolType,
+ IN UINTN Size,
+ OUT VOID **Buffer
+ )
+{
+ EFI_STATUS Status;
+
+ Status = MmInternalAllocatePool (PoolType, Size, Buffer);
+ return Status;
+}
+
+/**
+ Frees pool.
+
+ @param Buffer The allocated pool entry to free.
+
+ @retval EFI_INVALID_PARAMETER Buffer is not a valid value.
+ @retval EFI_SUCCESS Pool successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInternalFreePool (
+ IN VOID *Buffer
+ )
+{
+ FREE_POOL_HEADER *FreePoolHdr;
+
+ if (Buffer == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ FreePoolHdr = (FREE_POOL_HEADER*)((POOL_HEADER*)Buffer - 1);
+ ASSERT (!FreePoolHdr->Header.Available);
+
+ if (FreePoolHdr->Header.Size > MAX_POOL_SIZE) {
+ ASSERT (((UINTN)FreePoolHdr & EFI_PAGE_MASK) == 0);
+ ASSERT ((FreePoolHdr->Header.Size & EFI_PAGE_MASK) == 0);
+ return MmInternalFreePages (
+ (EFI_PHYSICAL_ADDRESS)(UINTN)FreePoolHdr,
+ EFI_SIZE_TO_PAGES (FreePoolHdr->Header.Size)
+ );
+ }
+ return InternalFreePoolByIndex (FreePoolHdr);
+}
+
+/**
+ Frees pool.
+
+ @param Buffer The allocated pool entry to free.
+
+ @retval EFI_INVALID_PARAMETER Buffer is not a valid value.
+ @retval EFI_SUCCESS Pool successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+MmFreePool (
+ IN VOID *Buffer
+ )
+{
+ EFI_STATUS Status;
+
+ Status = MmInternalFreePool (Buffer);
+ return Status;
+}
diff --git a/StandaloneMmPkg/Core/StandaloneMmCore.c b/StandaloneMmPkg/Core/StandaloneMmCore.c
new file mode 100644
index 0000000000..05048158b3
--- /dev/null
+++ b/StandaloneMmPkg/Core/StandaloneMmCore.c
@@ -0,0 +1,708 @@
+/** @file
+ MM Core Main Entry Point
+
+ Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include "StandaloneMmCore.h"
+
+EFI_STATUS
+MmCoreFfsFindMmDriver (
+ IN EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader
+ );
+
+EFI_STATUS
+MmDispatcher (
+ VOID
+ );
+
+//
+// Globals used to initialize the protocol
+//
+EFI_HANDLE mMmCpuHandle = NULL;
+
+//
+// Physical pointer to private structure shared between MM IPL and the MM Core
+//
+MM_CORE_PRIVATE_DATA *gMmCorePrivate;
+
+//
+// MM Core global variable for MM System Table. Only accessed as a physical structure in MMRAM.
+//
+EFI_MM_SYSTEM_TABLE gMmCoreMmst = {
+
+ // The table header for the MMST.
+ {
+ MM_MMST_SIGNATURE,
+ EFI_MM_SYSTEM_TABLE_REVISION,
+ sizeof (gMmCoreMmst.Hdr)
+ },
+ // MmFirmwareVendor
+ NULL,
+ // MmFirmwareRevision
+ 0,
+ // MmInstallConfigurationTable
+ MmInstallConfigurationTable,
+ // I/O Service
+ {
+ {
+ (EFI_MM_CPU_IO) MmEfiNotAvailableYetArg5, // SmmMemRead
+ (EFI_MM_CPU_IO) MmEfiNotAvailableYetArg5 // SmmMemWrite
+ },
+ {
+ (EFI_MM_CPU_IO) MmEfiNotAvailableYetArg5, // SmmIoRead
+ (EFI_MM_CPU_IO) MmEfiNotAvailableYetArg5 // SmmIoWrite
+ }
+ },
+ // Runtime memory services
+ MmAllocatePool,
+ MmFreePool,
+ MmAllocatePages,
+ MmFreePages,
+ // MP service
+ NULL, // MmStartupThisAp
+ 0, // CurrentlyExecutingCpu
+ 0, // NumberOfCpus
+ NULL, // CpuSaveStateSize
+ NULL, // CpuSaveState
+ 0, // NumberOfTableEntries
+ NULL, // MmConfigurationTable
+ MmInstallProtocolInterface,
+ MmUninstallProtocolInterface,
+ MmHandleProtocol,
+ MmRegisterProtocolNotify,
+ MmLocateHandle,
+ MmLocateProtocol,
+ MmiManage,
+ MmiHandlerRegister,
+ MmiHandlerUnRegister
+};
+
+//
+// Flag to determine if the platform has performed a legacy boot.
+// If this flag is TRUE, then the runtime code and runtime data associated with the
+// MM IPL are converted to free memory, so the MM Core must guarantee that is
+// does not touch of the code/data associated with the MM IPL if this flag is TRUE.
+//
+BOOLEAN mInLegacyBoot = FALSE;
+
+//
+// Table of MMI Handlers that are registered by the MM Core when it is initialized
+//
+MM_CORE_MMI_HANDLERS mMmCoreMmiHandlers[] = {
+ { MmFvDispatchHandler, &gMmFvDispatchGuid, NULL, TRUE },
+ { MmDriverDispatchHandler, &gEfiEventDxeDispatchGuid, NULL, TRUE },
+ { MmReadyToLockHandler, &gEfiDxeMmReadyToLockProtocolGuid, NULL, TRUE },
+ { MmEndOfDxeHandler, &gEfiEndOfDxeEventGroupGuid, NULL, FALSE },
+ { MmLegacyBootHandler, &gEfiEventLegacyBootGuid, NULL, FALSE },
+ { MmExitBootServiceHandler,&gEfiEventExitBootServicesGuid, NULL, FALSE },
+ { MmReadyToBootHandler, &gEfiEventReadyToBootGuid, NULL, FALSE },
+ { NULL, NULL, NULL, FALSE },
+};
+
+EFI_SYSTEM_TABLE *mEfiSystemTable;
+UINTN mMmramRangeCount;
+EFI_MMRAM_DESCRIPTOR *mMmramRanges;
+
+/**
+ Place holder function until all the MM System Table Service are available.
+
+ Note: This function is only used by MMRAM invocation. It is never used by DXE invocation.
+
+ @param Arg1 Undefined
+ @param Arg2 Undefined
+ @param Arg3 Undefined
+ @param Arg4 Undefined
+ @param Arg5 Undefined
+
+ @return EFI_NOT_AVAILABLE_YET
+
+**/
+EFI_STATUS
+EFIAPI
+MmEfiNotAvailableYetArg5 (
+ UINTN Arg1,
+ UINTN Arg2,
+ UINTN Arg3,
+ UINTN Arg4,
+ UINTN Arg5
+ )
+{
+ //
+ // This function should never be executed. If it does, then the architectural protocols
+ // have not been designed correctly.
+ //
+ return EFI_NOT_AVAILABLE_YET;
+}
+
+/**
+ Software MMI handler that is called when a Legacy Boot event is signaled. The MM
+ Core uses this signal to know that a Legacy Boot has been performed and that
+ gMmCorePrivate that is shared between the UEFI and MM execution environments can
+ not be accessed from MM anymore since that structure is considered free memory by
+ a legacy OS.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmLegacyBootHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ )
+{
+ EFI_HANDLE MmHandle;
+ EFI_STATUS Status = EFI_SUCCESS;
+
+ if (!mInLegacyBoot) {
+ MmHandle = NULL;
+ Status = MmInstallProtocolInterface (
+ &MmHandle,
+ &gEfiEventLegacyBootGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+ }
+ mInLegacyBoot = TRUE;
+ return Status;
+}
+
+/**
+ Software MMI handler that is called when a ExitBoot Service event is signaled.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmExitBootServiceHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ )
+{
+ EFI_HANDLE MmHandle;
+ EFI_STATUS Status = EFI_SUCCESS;
+ STATIC BOOLEAN mInExitBootServices = FALSE;
+
+ if (!mInExitBootServices) {
+ MmHandle = NULL;
+ Status = MmInstallProtocolInterface (
+ &MmHandle,
+ &gEfiEventExitBootServicesGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+ }
+ mInExitBootServices = TRUE;
+ return Status;
+}
+
+/**
+ Software MMI handler that is called when a ExitBoot Service event is signaled.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmReadyToBootHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ )
+{
+ EFI_HANDLE MmHandle;
+ EFI_STATUS Status = EFI_SUCCESS;
+ STATIC BOOLEAN mInReadyToBoot = FALSE;
+
+ if (!mInReadyToBoot) {
+ MmHandle = NULL;
+ Status = MmInstallProtocolInterface (
+ &MmHandle,
+ &gEfiEventReadyToBootGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+ }
+ mInReadyToBoot = TRUE;
+ return Status;
+}
+
+/**
+ Software MMI handler that is called when the DxeMmReadyToLock protocol is added
+ or if gEfiEventReadyToBootGuid is signaled. This function unregisters the
+ Software SMIs that are nor required after MMRAM is locked and installs the
+ MM Ready To Lock Protocol so MM Drivers are informed that MMRAM is about
+ to be locked.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmReadyToLockHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ UINTN Index;
+ EFI_HANDLE MmHandle;
+
+ DEBUG ((EFI_D_INFO, "MmReadyToLockHandler\n"));
+
+ //
+ // Unregister MMI Handlers that are no longer required after the MM driver dispatch is stopped
+ //
+ for (Index = 0; mMmCoreMmiHandlers[Index].HandlerType != NULL; Index++) {
+ if (mMmCoreMmiHandlers[Index].UnRegister) {
+ MmiHandlerUnRegister (mMmCoreMmiHandlers[Index].DispatchHandle);
+ }
+ }
+
+ //
+ // Install MM Ready to lock protocol
+ //
+ MmHandle = NULL;
+ Status = MmInstallProtocolInterface (
+ &MmHandle,
+ &gEfiMmReadyToLockProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+
+ //
+ // Make sure MM CPU I/O 2 Protocol has been installed into the handle database
+ //
+ //Status = MmLocateProtocol (&EFI_MM_CPU_IO_PROTOCOL_GUID, NULL, &Interface);
+
+ //
+ // Print a message on a debug build if the MM CPU I/O 2 Protocol is not installed
+ //
+ //if (EFI_ERROR (Status)) {
+ //DEBUG ((DEBUG_ERROR, "\nSMM: SmmCpuIo Arch Protocol not present!!\n"));
+ //}
+
+
+ //
+ // Assert if the CPU I/O 2 Protocol is not installed
+ //
+ //ASSERT_EFI_ERROR (Status);
+
+ //
+ // Display any drivers that were not dispatched because dependency expression
+ // evaluated to false if this is a debug build
+ //
+ //MmDisplayDiscoveredNotDispatched ();
+
+ return Status;
+}
+
+/**
+ Software MMI handler that is called when the EndOfDxe event is signaled.
+ This function installs the MM EndOfDxe Protocol so MM Drivers are informed that
+ platform code will invoke 3rd part code.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmEndOfDxeHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE MmHandle;
+
+ DEBUG ((EFI_D_INFO, "MmEndOfDxeHandler\n"));
+ //
+ // Install MM EndOfDxe protocol
+ //
+ MmHandle = NULL;
+ Status = MmInstallProtocolInterface (
+ &MmHandle,
+ &gEfiMmEndOfDxeProtocolGuid,
+ EFI_NATIVE_INTERFACE,
+ NULL
+ );
+ return Status;
+}
+
+
+
+/**
+ The main entry point to MM Foundation.
+
+ Note: This function is only used by MMRAM invocation. It is never used by DXE invocation.
+
+ @param MmEntryContext Processor information and functionality
+ needed by MM Foundation.
+
+**/
+VOID
+EFIAPI
+MmEntryPoint (
+ IN CONST EFI_MM_ENTRY_CONTEXT *MmEntryContext
+)
+{
+ EFI_STATUS Status;
+ EFI_MM_COMMUNICATE_HEADER *CommunicateHeader;
+ BOOLEAN InLegacyBoot;
+
+ DEBUG ((EFI_D_INFO, "MmEntryPoint ...\n"));
+
+ //
+ // Update MMST using the context
+ //
+ CopyMem (&gMmCoreMmst.MmStartupThisAp, MmEntryContext, sizeof (EFI_MM_ENTRY_CONTEXT));
+
+ //
+ // Call platform hook before Mm Dispatch
+ //
+ //PlatformHookBeforeMmDispatch ();
+
+ //
+ // If a legacy boot has occured, then make sure gMmCorePrivate is not accessed
+ //
+ InLegacyBoot = mInLegacyBoot;
+ if (!InLegacyBoot) {
+ //
+ // TBD: Mark the InMm flag as TRUE
+ //
+ gMmCorePrivate->InMm = TRUE;
+
+ //
+ // Check to see if this is a Synchronous MMI sent through the MM Communication
+ // Protocol or an Asynchronous MMI
+ //
+ if (gMmCorePrivate->CommunicationBuffer != 0) {
+ //
+ // Synchronous MMI for MM Core or request from Communicate protocol
+ //
+ if (!MmIsBufferOutsideMmValid ((UINTN)gMmCorePrivate->CommunicationBuffer, gMmCorePrivate->BufferSize)) {
+ //
+ // If CommunicationBuffer is not in valid address scope, return EFI_INVALID_PARAMETER
+ //
+ gMmCorePrivate->CommunicationBuffer = 0;
+ gMmCorePrivate->ReturnStatus = EFI_INVALID_PARAMETER;
+ } else {
+ CommunicateHeader = (EFI_MM_COMMUNICATE_HEADER *)(UINTN)gMmCorePrivate->CommunicationBuffer;
+ gMmCorePrivate->BufferSize -= OFFSET_OF (EFI_MM_COMMUNICATE_HEADER, Data);
+ //DEBUG ((EFI_D_INFO, "CommunicateHeader->HeaderGuid - %g\n", &CommunicateHeader->HeaderGuid));
+ Status = MmiManage (
+ &CommunicateHeader->HeaderGuid,
+ NULL,
+ CommunicateHeader->Data,
+ (UINTN *)&gMmCorePrivate->BufferSize
+ );
+ //
+ // Update CommunicationBuffer, BufferSize and ReturnStatus
+ // Communicate service finished, reset the pointer to CommBuffer to NULL
+ //
+ gMmCorePrivate->BufferSize += OFFSET_OF (EFI_MM_COMMUNICATE_HEADER, Data);
+ gMmCorePrivate->CommunicationBuffer = 0;
+ gMmCorePrivate->ReturnStatus = (Status == EFI_SUCCESS) ? EFI_SUCCESS : EFI_NOT_FOUND;
+ }
+ }
+ }
+
+ //
+ // Process Asynchronous MMI sources
+ //
+ MmiManage (NULL, NULL, NULL, NULL);
+
+ //
+ // TBD: Do not use private data structure ?
+ //
+
+ //
+ // If a legacy boot has occured, then make sure gMmCorePrivate is not accessed
+ //
+ if (!InLegacyBoot) {
+ //
+ // Clear the InMm flag as we are going to leave MM
+ //
+ gMmCorePrivate->InMm = FALSE;
+ }
+
+ DEBUG ((EFI_D_INFO, "MmEntryPoint Done\n"));
+}
+
+EFI_STATUS
+EFIAPI
+MmConfigurationMmNotify (
+ IN CONST EFI_GUID *Protocol,
+ IN VOID *Interface,
+ IN EFI_HANDLE Handle
+ )
+{
+ EFI_STATUS Status;
+ EFI_MM_CONFIGURATION_PROTOCOL *MmConfiguration;
+
+ DEBUG ((EFI_D_INFO, "MmConfigurationMmNotify(%g) - %x\n", Protocol, Interface));
+
+ MmConfiguration = Interface;
+
+ //
+ // Register the MM Entry Point provided by the MM Core with the MM COnfiguration protocol
+ //
+ Status = MmConfiguration->RegisterMmEntry (MmConfiguration, (EFI_MM_ENTRY_POINT)(UINTN)gMmCorePrivate->MmEntryPoint);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Set flag to indicate that the MM Entry Point has been registered which
+ // means that MMIs are now fully operational.
+ //
+ gMmCorePrivate->MmEntryPointRegistered = TRUE;
+
+ //
+ // Print debug message showing MM Core entry point address.
+ //
+ DEBUG ((DEBUG_INFO, "MM Core registered MM Entry Point address %p\n", (VOID *)(UINTN)gMmCorePrivate->MmEntryPoint));
+ return EFI_SUCCESS;
+}
+
+UINTN
+GetHobListSize (
+ IN VOID *HobStart
+ )
+{
+ EFI_PEI_HOB_POINTERS Hob;
+
+ ASSERT (HobStart != NULL);
+
+ Hob.Raw = (UINT8 *) HobStart;
+ while (!END_OF_HOB_LIST (Hob)) {
+ Hob.Raw = GET_NEXT_HOB (Hob);
+ }
+ //
+ // Need plus END_OF_HOB_LIST
+ //
+ return (UINTN)Hob.Raw - (UINTN)HobStart + sizeof(EFI_HOB_GENERIC_HEADER);
+}
+
+/**
+ The Entry Point for MM Core
+
+ Install DXE Protocols and reload MM Core into MMRAM and register MM Core
+ EntryPoint on the MMI vector.
+
+ Note: This function is called for both DXE invocation and MMRAM invocation.
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The entry point is executed successfully.
+ @retval Other Some error occurred when executing this entry point.
+
+**/
+EFI_STATUS
+EFIAPI
+StandaloneMmMain (
+ IN VOID *HobStart
+ )
+{
+ EFI_STATUS Status;
+ UINTN Index;
+ VOID *MmHobStart;
+ UINTN HobSize;
+ VOID *Registration;
+ EFI_HOB_GUID_TYPE *GuidHob;
+ MM_CORE_DATA_HOB_DATA *DataInHob;
+ EFI_HOB_GUID_TYPE *MmramRangesHob;
+ EFI_MMRAM_HOB_DESCRIPTOR_BLOCK *MmramRangesHobData;
+ EFI_MMRAM_DESCRIPTOR *MmramRanges;
+ UINT32 MmramRangeCount;
+ EFI_HOB_FIRMWARE_VOLUME *BfvHob;
+
+ ProcessLibraryConstructorList (HobStart, &gMmCoreMmst);
+
+ DEBUG ((EFI_D_INFO, "MmMain - 0x%x\n", HobStart));
+
+ //
+ // Determine if the caller has passed a reference to a MM_CORE_PRIVATE_DATA
+ // structure in the Hoblist. This choice will govern how boot information is
+ // extracted later.
+ //
+ GuidHob = GetNextGuidHob (&gMmCoreDataHobGuid, HobStart);
+ if (GuidHob == NULL) {
+ //
+ // Allocate and zero memory for a MM_CORE_PRIVATE_DATA table and then
+ // initialise it
+ //
+ gMmCorePrivate = (MM_CORE_PRIVATE_DATA *) AllocateRuntimePages(EFI_SIZE_TO_PAGES(sizeof(MM_CORE_PRIVATE_DATA)));
+ SetMem ((VOID *)(UINTN)gMmCorePrivate, sizeof(MM_CORE_PRIVATE_DATA), 0);
+ gMmCorePrivate->Signature = MM_CORE_PRIVATE_DATA_SIGNATURE;
+ gMmCorePrivate->MmEntryPointRegistered = FALSE;
+ gMmCorePrivate->InMm = FALSE;
+ gMmCorePrivate->ReturnStatus = EFI_SUCCESS;
+
+ //
+ // Extract the MMRAM ranges from the MMRAM descriptor HOB
+ //
+ MmramRangesHob = GetNextGuidHob (&gEfiMmPeiMmramMemoryReserveGuid, HobStart);
+ if (MmramRangesHob == NULL)
+ return EFI_UNSUPPORTED;
+
+ MmramRangesHobData = GET_GUID_HOB_DATA (MmramRangesHob);
+ ASSERT (MmramRangesHobData != NULL);
+ MmramRanges = MmramRangesHobData->Descriptor;
+ MmramRangeCount = MmramRangesHobData->NumberOfMmReservedRegions;
+ ASSERT (MmramRanges);
+ ASSERT (MmramRangeCount);
+
+ //
+ // Copy the MMRAM ranges into MM_CORE_PRIVATE_DATA table just in case any
+ // code relies on them being present there
+ //
+ gMmCorePrivate->MmramRangeCount = MmramRangeCount;
+ gMmCorePrivate->MmramRanges = (EFI_PHYSICAL_ADDRESS)(UINTN)AllocatePool (MmramRangeCount * sizeof(EFI_MMRAM_DESCRIPTOR));
+ ASSERT (gMmCorePrivate->MmramRanges != 0);
+ CopyMem ((VOID *)(UINTN)gMmCorePrivate->MmramRanges,
+ MmramRanges,
+ MmramRangeCount * sizeof(EFI_MMRAM_DESCRIPTOR));
+ } else {
+ DataInHob = GET_GUID_HOB_DATA (GuidHob);
+ gMmCorePrivate = (MM_CORE_PRIVATE_DATA *)(UINTN)DataInHob->Address;
+ MmramRanges = (EFI_MMRAM_DESCRIPTOR *)(UINTN)gMmCorePrivate->MmramRanges;
+ MmramRangeCount = gMmCorePrivate->MmramRangeCount;
+ }
+
+ //
+ // Print the MMRAM ranges passed by the caller
+ //
+ DEBUG ((EFI_D_INFO, "MmramRangeCount - 0x%x\n", MmramRangeCount));
+ for (Index = 0; Index < MmramRangeCount; Index++) {
+ DEBUG ((EFI_D_INFO, "MmramRanges[%d]: 0x%016lx - 0x%lx\n", Index,
+ MmramRanges[Index].CpuStart,
+ MmramRanges[Index].PhysicalSize));
+ }
+
+ //
+ // Copy the MMRAM ranges into private MMRAM
+ //
+ mMmramRangeCount = MmramRangeCount;
+ DEBUG ((EFI_D_INFO, "mMmramRangeCount - 0x%x\n", mMmramRangeCount));
+ mMmramRanges = AllocatePool (mMmramRangeCount * sizeof (EFI_MMRAM_DESCRIPTOR));
+ DEBUG ((EFI_D_INFO, "mMmramRanges - 0x%x\n", mMmramRanges));
+ ASSERT (mMmramRanges != NULL);
+ CopyMem (mMmramRanges, (VOID *)(UINTN)MmramRanges, mMmramRangeCount * sizeof (EFI_MMRAM_DESCRIPTOR));
+
+ //
+ // Get Boot Firmware Volume address from the BFV Hob
+ //
+ BfvHob = GetFirstHob (EFI_HOB_TYPE_FV);
+ if (BfvHob != NULL) {
+ DEBUG ((EFI_D_INFO, "BFV address - 0x%x\n", BfvHob->BaseAddress));
+ DEBUG ((EFI_D_INFO, "BFV size - 0x%x\n", BfvHob->Length));
+ gMmCorePrivate->StandaloneBfvAddress = BfvHob->BaseAddress;
+ }
+
+ gMmCorePrivate->Mmst = (EFI_PHYSICAL_ADDRESS)(UINTN)&gMmCoreMmst;
+ gMmCorePrivate->MmEntryPoint = (EFI_PHYSICAL_ADDRESS)(UINTN)MmEntryPoint;
+
+ //
+ // No need to initialize memory service.
+ // It is done in constructor of StandaloneMmCoreMemoryAllocationLib(),
+ // so that the library linked with StandaloneMmCore can use AllocatePool() in constuctor.
+ //
+
+ DEBUG ((EFI_D_INFO, "MmInstallConfigurationTable For HobList\n"));
+ //
+ // Install HobList
+ //
+ HobSize = GetHobListSize (HobStart);
+ DEBUG ((EFI_D_INFO, "HobSize - 0x%x\n", HobSize));
+ MmHobStart = AllocatePool (HobSize);
+ DEBUG ((EFI_D_INFO, "MmHobStart - 0x%x\n", MmHobStart));
+ ASSERT (MmHobStart != NULL);
+ CopyMem (MmHobStart, HobStart, HobSize);
+ Status = MmInstallConfigurationTable (&gMmCoreMmst, &gEfiHobListGuid, MmHobStart, HobSize);
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Register notification for EFI_MM_CONFIGURATION_PROTOCOL registration and
+ // use it to register the MM Foundation entrypoint
+ //
+ DEBUG ((EFI_D_INFO, "MmRegisterProtocolNotify - MmConfigurationMmProtocol\n"));
+ Status = MmRegisterProtocolNotify (
+ &gEfiMmConfigurationProtocolGuid,
+ MmConfigurationMmNotify,
+ &Registration
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ //
+ // Dispatch standalone BFV
+ //
+ DEBUG ((EFI_D_INFO, "Mm Dispatch StandaloneBfvAddress - 0x%08x\n", gMmCorePrivate->StandaloneBfvAddress));
+ if (gMmCorePrivate->StandaloneBfvAddress != 0) {
+ MmCoreFfsFindMmDriver ((EFI_FIRMWARE_VOLUME_HEADER *)(UINTN)gMmCorePrivate->StandaloneBfvAddress);
+ MmDispatcher ();
+ }
+
+ //
+ // Register all handlers in the core table
+ //
+ for (Index = 0; mMmCoreMmiHandlers[Index].HandlerType != NULL; Index++) {
+ Status = MmiHandlerRegister(mMmCoreMmiHandlers[Index].Handler,
+ mMmCoreMmiHandlers[Index].HandlerType,
+ &mMmCoreMmiHandlers[Index].DispatchHandle);
+ DEBUG ((EFI_D_INFO, "MmiHandlerRegister - GUID %g - Status %d\n", mMmCoreMmiHandlers[Index].HandlerType, Status));
+ }
+
+ DEBUG ((EFI_D_INFO, "MmMain Done!\n"));
+
+ return EFI_SUCCESS;
+}
diff --git a/StandaloneMmPkg/Core/StandaloneMmCore.h b/StandaloneMmPkg/Core/StandaloneMmCore.h
new file mode 100644
index 0000000000..53921b7844
--- /dev/null
+++ b/StandaloneMmPkg/Core/StandaloneMmCore.h
@@ -0,0 +1,903 @@
+/** @file
+ The internal header file includes the common header files, defines
+ internal structure and functions used by MmCore module.
+
+ Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _MM_CORE_H_
+#define _MM_CORE_H_
+
+#include <PiMm.h>
+#include <StandaloneMm.h>
+
+#include <Protocol/DxeMmReadyToLock.h>
+#include <Protocol/MmReadyToLock.h>
+#include <Protocol/MmEndOfDxe.h>
+#include <Protocol/MmCommunication.h>
+#include <Protocol/LoadedImage.h>
+#include <Protocol/MmConfiguration.h>
+
+#include <Guid/Apriori.h>
+#include <Guid/EventGroup.h>
+#include <Guid/EventLegacyBios.h>
+#include <Guid/ZeroGuid.h>
+#include <Guid/MemoryProfile.h>
+#include <Guid/HobList.h>
+#include <Guid/MmFvDispatch.h>
+#include <Guid/MmramMemoryReserve.h>
+
+#include <Library/MmCoreStandaloneEntryPoint.h>
+#include <Library/BaseLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/PeCoffLib.h>
+#include <Library/CacheMaintenanceLib.h>
+#include <Library/DebugLib.h>
+#include <Library/ReportStatusCodeLib.h>
+#include <Library/MemoryAllocationLib.h>
+#include <Library/PcdLib.h>
+//#include <Library/MmCorePlatformHookLib.h>
+#include <Library/MemLib.h>
+#include <Library/HobLib.h>
+
+#include "StandaloneMmCorePrivateData.h"
+
+//
+// Used to build a table of MMI Handlers that the MM Core registers
+//
+typedef struct {
+ EFI_MM_HANDLER_ENTRY_POINT Handler;
+ EFI_GUID *HandlerType;
+ EFI_HANDLE DispatchHandle;
+ BOOLEAN UnRegister;
+} MM_CORE_MMI_HANDLERS;
+
+//
+// Structure for recording the state of an MM Driver
+//
+#define EFI_MM_DRIVER_ENTRY_SIGNATURE SIGNATURE_32('s', 'd','r','v')
+
+typedef struct {
+ UINTN Signature;
+ LIST_ENTRY Link; // mDriverList
+
+ LIST_ENTRY ScheduledLink; // mScheduledQueue
+
+ EFI_HANDLE FvHandle;
+ EFI_GUID FileName;
+ VOID *Pe32Data;
+ UINTN Pe32DataSize;
+
+ VOID *Depex;
+ UINTN DepexSize;
+
+ BOOLEAN Before;
+ BOOLEAN After;
+ EFI_GUID BeforeAfterGuid;
+
+ BOOLEAN Dependent;
+ BOOLEAN Scheduled;
+ BOOLEAN Initialized;
+ BOOLEAN DepexProtocolError;
+
+ EFI_HANDLE ImageHandle;
+ EFI_LOADED_IMAGE_PROTOCOL *LoadedImage;
+ //
+ // Image EntryPoint in MMRAM
+ //
+ PHYSICAL_ADDRESS ImageEntryPoint;
+ //
+ // Image Buffer in MMRAM
+ //
+ PHYSICAL_ADDRESS ImageBuffer;
+ //
+ // Image Page Number
+ //
+ UINTN NumberOfPage;
+} EFI_MM_DRIVER_ENTRY;
+
+#define EFI_HANDLE_SIGNATURE SIGNATURE_32('h','n','d','l')
+
+///
+/// IHANDLE - contains a list of protocol handles
+///
+typedef struct {
+ UINTN Signature;
+ /// All handles list of IHANDLE
+ LIST_ENTRY AllHandles;
+ /// List of PROTOCOL_INTERFACE's for this handle
+ LIST_ENTRY Protocols;
+ UINTN LocateRequest;
+} IHANDLE;
+
+#define ASSERT_IS_HANDLE(a) ASSERT((a)->Signature == EFI_HANDLE_SIGNATURE)
+
+#define PROTOCOL_ENTRY_SIGNATURE SIGNATURE_32('p','r','t','e')
+
+///
+/// PROTOCOL_ENTRY - each different protocol has 1 entry in the protocol
+/// database. Each handler that supports this protocol is listed, along
+/// with a list of registered notifies.
+///
+typedef struct {
+ UINTN Signature;
+ /// Link Entry inserted to mProtocolDatabase
+ LIST_ENTRY AllEntries;
+ /// ID of the protocol
+ EFI_GUID ProtocolID;
+ /// All protocol interfaces
+ LIST_ENTRY Protocols;
+ /// Registerd notification handlers
+ LIST_ENTRY Notify;
+} PROTOCOL_ENTRY;
+
+#define PROTOCOL_INTERFACE_SIGNATURE SIGNATURE_32('p','i','f','c')
+
+///
+/// PROTOCOL_INTERFACE - each protocol installed on a handle is tracked
+/// with a protocol interface structure
+///
+typedef struct {
+ UINTN Signature;
+ /// Link on IHANDLE.Protocols
+ LIST_ENTRY Link;
+ /// Back pointer
+ IHANDLE *Handle;
+ /// Link on PROTOCOL_ENTRY.Protocols
+ LIST_ENTRY ByProtocol;
+ /// The protocol ID
+ PROTOCOL_ENTRY *Protocol;
+ /// The interface value
+ VOID *Interface;
+} PROTOCOL_INTERFACE;
+
+#define PROTOCOL_NOTIFY_SIGNATURE SIGNATURE_32('p','r','t','n')
+
+///
+/// PROTOCOL_NOTIFY - used for each register notification for a protocol
+///
+typedef struct {
+ UINTN Signature;
+ PROTOCOL_ENTRY *Protocol;
+ /// All notifications for this protocol
+ LIST_ENTRY Link;
+ /// Notification function
+ EFI_MM_NOTIFY_FN Function;
+ /// Last position notified
+ LIST_ENTRY *Position;
+} PROTOCOL_NOTIFY;
+
+//
+// MM Core Global Variables
+//
+extern MM_CORE_PRIVATE_DATA *gMmCorePrivate;
+extern EFI_MM_SYSTEM_TABLE gMmCoreMmst;
+extern LIST_ENTRY gHandleList;
+extern EFI_PHYSICAL_ADDRESS gLoadModuleAtFixAddressMmramBase;
+
+/**
+ Called to initialize the memory service.
+
+ @param MmramRangeCount Number of MMRAM Regions
+ @param MmramRanges Pointer to MMRAM Descriptors
+
+**/
+VOID
+MmInitializeMemoryServices (
+ IN UINTN MmramRangeCount,
+ IN EFI_MMRAM_DESCRIPTOR *MmramRanges
+ );
+
+/**
+ The MmInstallConfigurationTable() function is used to maintain the list
+ of configuration tables that are stored in the System Management System
+ Table. The list is stored as an array of (GUID, Pointer) pairs. The list
+ must be allocated from pool memory with PoolType set to EfiRuntimeServicesData.
+
+ @param SystemTable A pointer to the MM System Table (SMST).
+ @param Guid A pointer to the GUID for the entry to add, update, or remove.
+ @param Table A pointer to the buffer of the table to add.
+ @param TableSize The size of the table to install.
+
+ @retval EFI_SUCCESS The (Guid, Table) pair was added, updated, or removed.
+ @retval EFI_INVALID_PARAMETER Guid is not valid.
+ @retval EFI_NOT_FOUND An attempt was made to delete a non-existent entry.
+ @retval EFI_OUT_OF_RESOURCES There is not enough memory available to complete the operation.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInstallConfigurationTable (
+ IN CONST EFI_MM_SYSTEM_TABLE *SystemTable,
+ IN CONST EFI_GUID *Guid,
+ IN VOID *Table,
+ IN UINTN TableSize
+ );
+
+/**
+ Wrapper function to MmInstallProtocolInterfaceNotify. This is the public API which
+ Calls the private one which contains a BOOLEAN parameter for notifications
+
+ @param UserHandle The handle to install the protocol handler on,
+ or NULL if a new handle is to be allocated
+ @param Protocol The protocol to add to the handle
+ @param InterfaceType Indicates whether Interface is supplied in
+ native form.
+ @param Interface The interface for the protocol being added
+
+ @return Status code
+
+**/
+EFI_STATUS
+EFIAPI
+MmInstallProtocolInterface (
+ IN OUT EFI_HANDLE *UserHandle,
+ IN EFI_GUID *Protocol,
+ IN EFI_INTERFACE_TYPE InterfaceType,
+ IN VOID *Interface
+ );
+
+/**
+ Allocates pages from the memory map.
+
+ @param Type The type of allocation to perform
+ @param MemoryType The type of memory to turn the allocated pages
+ into
+ @param NumberOfPages The number of pages to allocate
+ @param Memory A pointer to receive the base allocated memory
+ address
+
+ @retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in spec.
+ @retval EFI_NOT_FOUND Could not allocate pages match the requirement.
+ @retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
+ @retval EFI_SUCCESS Pages successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+MmAllocatePages (
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN NumberOfPages,
+ OUT EFI_PHYSICAL_ADDRESS *Memory
+ );
+
+/**
+ Allocates pages from the memory map.
+
+ @param Type The type of allocation to perform
+ @param MemoryType The type of memory to turn the allocated pages
+ into
+ @param NumberOfPages The number of pages to allocate
+ @param Memory A pointer to receive the base allocated memory
+ address
+
+ @retval EFI_INVALID_PARAMETER Parameters violate checking rules defined in spec.
+ @retval EFI_NOT_FOUND Could not allocate pages match the requirement.
+ @retval EFI_OUT_OF_RESOURCES No enough pages to allocate.
+ @retval EFI_SUCCESS Pages successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInternalAllocatePages (
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN NumberOfPages,
+ OUT EFI_PHYSICAL_ADDRESS *Memory
+ );
+
+/**
+ Frees previous allocated pages.
+
+ @param Memory Base address of memory being freed
+ @param NumberOfPages The number of pages to free
+
+ @retval EFI_NOT_FOUND Could not find the entry that covers the range
+ @retval EFI_INVALID_PARAMETER Address not aligned, Address is zero or NumberOfPages is zero.
+ @return EFI_SUCCESS Pages successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+MmFreePages (
+ IN EFI_PHYSICAL_ADDRESS Memory,
+ IN UINTN NumberOfPages
+ );
+
+/**
+ Frees previous allocated pages.
+
+ @param Memory Base address of memory being freed
+ @param NumberOfPages The number of pages to free
+
+ @retval EFI_NOT_FOUND Could not find the entry that covers the range
+ @retval EFI_INVALID_PARAMETER Address not aligned, Address is zero or NumberOfPages is zero.
+ @return EFI_SUCCESS Pages successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInternalFreePages (
+ IN EFI_PHYSICAL_ADDRESS Memory,
+ IN UINTN NumberOfPages
+ );
+
+/**
+ Allocate pool of a particular type.
+
+ @param PoolType Type of pool to allocate
+ @param Size The amount of pool to allocate
+ @param Buffer The address to return a pointer to the allocated
+ pool
+
+ @retval EFI_INVALID_PARAMETER PoolType not valid
+ @retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
+ @retval EFI_SUCCESS Pool successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+MmAllocatePool (
+ IN EFI_MEMORY_TYPE PoolType,
+ IN UINTN Size,
+ OUT VOID **Buffer
+ );
+
+/**
+ Allocate pool of a particular type.
+
+ @param PoolType Type of pool to allocate
+ @param Size The amount of pool to allocate
+ @param Buffer The address to return a pointer to the allocated
+ pool
+
+ @retval EFI_INVALID_PARAMETER PoolType not valid
+ @retval EFI_OUT_OF_RESOURCES Size exceeds max pool size or allocation failed.
+ @retval EFI_SUCCESS Pool successfully allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInternalAllocatePool (
+ IN EFI_MEMORY_TYPE PoolType,
+ IN UINTN Size,
+ OUT VOID **Buffer
+ );
+
+/**
+ Frees pool.
+
+ @param Buffer The allocated pool entry to free
+
+ @retval EFI_INVALID_PARAMETER Buffer is not a valid value.
+ @retval EFI_SUCCESS Pool successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+MmFreePool (
+ IN VOID *Buffer
+ );
+
+/**
+ Frees pool.
+
+ @param Buffer The allocated pool entry to free
+
+ @retval EFI_INVALID_PARAMETER Buffer is not a valid value.
+ @retval EFI_SUCCESS Pool successfully freed.
+
+**/
+EFI_STATUS
+EFIAPI
+MmInternalFreePool (
+ IN VOID *Buffer
+ );
+
+/**
+ Installs a protocol interface into the boot services environment.
+
+ @param UserHandle The handle to install the protocol handler on,
+ or NULL if a new handle is to be allocated
+ @param Protocol The protocol to add to the handle
+ @param InterfaceType Indicates whether Interface is supplied in
+ native form.
+ @param Interface The interface for the protocol being added
+ @param Notify indicates whether notify the notification list
+ for this protocol
+
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_OUT_OF_RESOURCES No enough buffer to allocate
+ @retval EFI_SUCCESS Protocol interface successfully installed
+
+**/
+EFI_STATUS
+MmInstallProtocolInterfaceNotify (
+ IN OUT EFI_HANDLE *UserHandle,
+ IN EFI_GUID *Protocol,
+ IN EFI_INTERFACE_TYPE InterfaceType,
+ IN VOID *Interface,
+ IN BOOLEAN Notify
+ );
+
+/**
+ Uninstalls all instances of a protocol:interfacer from a handle.
+ If the last protocol interface is remove from the handle, the
+ handle is freed.
+
+ @param UserHandle The handle to remove the protocol handler from
+ @param Protocol The protocol, of protocol:interface, to remove
+ @param Interface The interface, of protocol:interface, to remove
+
+ @retval EFI_INVALID_PARAMETER Protocol is NULL.
+ @retval EFI_SUCCESS Protocol interface successfully uninstalled.
+
+**/
+EFI_STATUS
+EFIAPI
+MmUninstallProtocolInterface (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ );
+
+/**
+ Queries a handle to determine if it supports a specified protocol.
+
+ @param UserHandle The handle being queried.
+ @param Protocol The published unique identifier of the protocol.
+ @param Interface Supplies the address where a pointer to the
+ corresponding Protocol Interface is returned.
+
+ @return The requested protocol interface for the handle
+
+**/
+EFI_STATUS
+EFIAPI
+MmHandleProtocol (
+ IN EFI_HANDLE UserHandle,
+ IN EFI_GUID *Protocol,
+ OUT VOID **Interface
+ );
+
+/**
+ Add a new protocol notification record for the request protocol.
+
+ @param Protocol The requested protocol to add the notify
+ registration
+ @param Function Points to the notification function
+ @param Registration Returns the registration record
+
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_SUCCESS Successfully returned the registration record
+ that has been added
+
+**/
+EFI_STATUS
+EFIAPI
+MmRegisterProtocolNotify (
+ IN CONST EFI_GUID *Protocol,
+ IN EFI_MM_NOTIFY_FN Function,
+ OUT VOID **Registration
+ );
+
+/**
+ Locates the requested handle(s) and returns them in Buffer.
+
+ @param SearchType The type of search to perform to locate the
+ handles
+ @param Protocol The protocol to search for
+ @param SearchKey Dependant on SearchType
+ @param BufferSize On input the size of Buffer. On output the
+ size of data returned.
+ @param Buffer The buffer to return the results in
+
+ @retval EFI_BUFFER_TOO_SMALL Buffer too small, required buffer size is
+ returned in BufferSize.
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_SUCCESS Successfully found the requested handle(s) and
+ returns them in Buffer.
+
+**/
+EFI_STATUS
+EFIAPI
+MmLocateHandle (
+ IN EFI_LOCATE_SEARCH_TYPE SearchType,
+ IN EFI_GUID *Protocol OPTIONAL,
+ IN VOID *SearchKey OPTIONAL,
+ IN OUT UINTN *BufferSize,
+ OUT EFI_HANDLE *Buffer
+ );
+
+/**
+ Return the first Protocol Interface that matches the Protocol GUID. If
+ Registration is pasased in return a Protocol Instance that was just add
+ to the system. If Retistration is NULL return the first Protocol Interface
+ you find.
+
+ @param Protocol The protocol to search for
+ @param Registration Optional Registration Key returned from
+ RegisterProtocolNotify()
+ @param Interface Return the Protocol interface (instance).
+
+ @retval EFI_SUCCESS If a valid Interface is returned
+ @retval EFI_INVALID_PARAMETER Invalid parameter
+ @retval EFI_NOT_FOUND Protocol interface not found
+
+**/
+EFI_STATUS
+EFIAPI
+MmLocateProtocol (
+ IN EFI_GUID *Protocol,
+ IN VOID *Registration OPTIONAL,
+ OUT VOID **Interface
+ );
+
+/**
+ Manage MMI of a particular type.
+
+ @param HandlerType Points to the handler type or NULL for root MMI handlers.
+ @param Context Points to an optional context buffer.
+ @param CommBuffer Points to the optional communication buffer.
+ @param CommBufferSize Points to the size of the optional communication buffer.
+
+ @retval EFI_SUCCESS Interrupt source was processed successfully but not quiesced.
+ @retval EFI_INTERRUPT_PENDING One or more MMI sources could not be quiesced.
+ @retval EFI_WARN_INTERRUPT_SOURCE_PENDING Interrupt source was not handled or quiesced.
+ @retval EFI_WARN_INTERRUPT_SOURCE_QUIESCED Interrupt source was handled and quiesced.
+
+**/
+EFI_STATUS
+EFIAPI
+MmiManage (
+ IN CONST EFI_GUID *HandlerType,
+ IN CONST VOID *Context OPTIONAL,
+ IN OUT VOID *CommBuffer OPTIONAL,
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ );
+
+/**
+ Registers a handler to execute within MM.
+
+ @param Handler Handler service funtion pointer.
+ @param HandlerType Points to the handler type or NULL for root MMI handlers.
+ @param DispatchHandle On return, contains a unique handle which can be used to later unregister the handler function.
+
+ @retval EFI_SUCCESS Handler register success.
+ @retval EFI_INVALID_PARAMETER Handler or DispatchHandle is NULL.
+
+**/
+EFI_STATUS
+EFIAPI
+MmiHandlerRegister (
+ IN EFI_MM_HANDLER_ENTRY_POINT Handler,
+ IN CONST EFI_GUID *HandlerType OPTIONAL,
+ OUT EFI_HANDLE *DispatchHandle
+ );
+
+/**
+ Unregister a handler in MM.
+
+ @param DispatchHandle The handle that was specified when the handler was registered.
+
+ @retval EFI_SUCCESS Handler function was successfully unregistered.
+ @retval EFI_INVALID_PARAMETER DispatchHandle does not refer to a valid handle.
+
+**/
+EFI_STATUS
+EFIAPI
+MmiHandlerUnRegister (
+ IN EFI_HANDLE DispatchHandle
+ );
+
+/**
+ This function is the main entry point for an MM handler dispatch
+ or communicate-based callback.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmDriverDispatchHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ );
+
+/**
+ This function is the main entry point for an MM handler dispatch
+ or communicate-based callback.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmFvDispatchHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ );
+
+/**
+ This function is the main entry point for an MM handler dispatch
+ or communicate-based callback.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmLegacyBootHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ );
+
+/**
+ This function is the main entry point for an MM handler dispatch
+ or communicate-based callback.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmExitBootServiceHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ );
+
+/**
+ This function is the main entry point for an MM handler dispatch
+ or communicate-based callback.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmReadyToBootHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ );
+
+/**
+ This function is the main entry point for an MM handler dispatch
+ or communicate-based callback.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmReadyToLockHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ );
+
+/**
+ This function is the main entry point for an MM handler dispatch
+ or communicate-based callback.
+
+ @param DispatchHandle The unique handle assigned to this handler by MmiHandlerRegister().
+ @param Context Points to an optional handler context which was specified when the handler was registered.
+ @param CommBuffer A pointer to a collection of data in memory that will
+ be conveyed from a non-MM environment into an MM environment.
+ @param CommBufferSize The size of the CommBuffer.
+
+ @return Status Code
+
+**/
+EFI_STATUS
+EFIAPI
+MmEndOfDxeHandler (
+ IN EFI_HANDLE DispatchHandle,
+ IN CONST VOID *Context, OPTIONAL
+ IN OUT VOID *CommBuffer, OPTIONAL
+ IN OUT UINTN *CommBufferSize OPTIONAL
+ );
+
+/**
+ Place holder function until all the MM System Table Service are available.
+
+ @param Arg1 Undefined
+ @param Arg2 Undefined
+ @param Arg3 Undefined
+ @param Arg4 Undefined
+ @param Arg5 Undefined
+
+ @return EFI_NOT_AVAILABLE_YET
+
+**/
+EFI_STATUS
+EFIAPI
+MmEfiNotAvailableYetArg5 (
+ UINTN Arg1,
+ UINTN Arg2,
+ UINTN Arg3,
+ UINTN Arg4,
+ UINTN Arg5
+ );
+
+//
+//Functions used during debug buils
+//
+
+/**
+ Traverse the discovered list for any drivers that were discovered but not loaded
+ because the dependency expressions evaluated to false.
+
+**/
+VOID
+MmDisplayDiscoveredNotDispatched (
+ VOID
+ );
+
+/**
+ Add free MMRAM region for use by memory service.
+
+ @param MemBase Base address of memory region.
+ @param MemLength Length of the memory region.
+ @param Type Memory type.
+ @param Attributes Memory region state.
+
+**/
+VOID
+MmAddMemoryRegion (
+ IN EFI_PHYSICAL_ADDRESS MemBase,
+ IN UINT64 MemLength,
+ IN EFI_MEMORY_TYPE Type,
+ IN UINT64 Attributes
+ );
+
+/**
+ Finds the protocol entry for the requested protocol.
+
+ @param Protocol The ID of the protocol
+ @param Create Create a new entry if not found
+
+ @return Protocol entry
+
+**/
+PROTOCOL_ENTRY *
+MmFindProtocolEntry (
+ IN EFI_GUID *Protocol,
+ IN BOOLEAN Create
+ );
+
+/**
+ Signal event for every protocol in protocol entry.
+
+ @param Prot Protocol interface
+
+**/
+VOID
+MmNotifyProtocol (
+ IN PROTOCOL_INTERFACE *Prot
+ );
+
+/**
+ Finds the protocol instance for the requested handle and protocol.
+ Note: This function doesn't do parameters checking, it's caller's responsibility
+ to pass in valid parameters.
+
+ @param Handle The handle to search the protocol on
+ @param Protocol GUID of the protocol
+ @param Interface The interface for the protocol being searched
+
+ @return Protocol instance (NULL: Not found)
+
+**/
+PROTOCOL_INTERFACE *
+MmFindProtocolInterface (
+ IN IHANDLE *Handle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ );
+
+/**
+ Removes Protocol from the protocol list (but not the handle list).
+
+ @param Handle The handle to remove protocol on.
+ @param Protocol GUID of the protocol to be moved
+ @param Interface The interface of the protocol
+
+ @return Protocol Entry
+
+**/
+PROTOCOL_INTERFACE *
+MmRemoveInterfaceFromProtocol (
+ IN IHANDLE *Handle,
+ IN EFI_GUID *Protocol,
+ IN VOID *Interface
+ );
+
+/**
+ This is the POSTFIX version of the dependency evaluator. This code does
+ not need to handle Before or After, as it is not valid to call this
+ routine in this case. POSTFIX means all the math is done on top of the stack.
+
+ @param DriverEntry DriverEntry element to update.
+
+ @retval TRUE If driver is ready to run.
+ @retval FALSE If driver is not ready to run or some fatal error
+ was found.
+
+**/
+BOOLEAN
+MmIsSchedulable (
+ IN EFI_MM_DRIVER_ENTRY *DriverEntry
+ );
+
+/**
+ Dump MMRAM information.
+
+**/
+VOID
+DumpMmramInfo (
+ VOID
+ );
+
+extern UINTN mMmramRangeCount;
+extern EFI_MMRAM_DESCRIPTOR *mMmramRanges;
+extern EFI_SYSTEM_TABLE *mEfiSystemTable;
+
+#endif
diff --git a/StandaloneMmPkg/Core/StandaloneMmCore.inf b/StandaloneMmPkg/Core/StandaloneMmCore.inf
new file mode 100644
index 0000000000..c5eaa14ba3
--- /dev/null
+++ b/StandaloneMmPkg/Core/StandaloneMmCore.inf
@@ -0,0 +1,80 @@
+## @file
+# This module provide an SMM CIS compliant implementation of SMM Core.
+#
+# Copyright (c) 2009 - 2015, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+##
+
+[Defines]
+ INF_VERSION = 0x0001001A
+ BASE_NAME = StandaloneMmCore
+ FILE_GUID = 6E14B6FD-3600-4DD6-A17A-206B3B6DCE16
+ MODULE_TYPE = MM_CORE_STANDALONE
+ VERSION_STRING = 1.0
+ PI_SPECIFICATION_VERSION = 0x00010032
+ ENTRY_POINT = StandaloneMmMain
+
+# VALID_ARCHITECTURES = IA32 X64 AARCH64
+
+[Sources]
+ StandaloneMmCore.c
+ StandaloneMmCore.h
+ StandaloneMmCorePrivateData.h
+ Page.c
+ Pool.c
+ Handle.c
+ Locate.c
+ Notify.c
+ Dependency.c
+ Dispatcher.c
+ Mmi.c
+ InstallConfigurationTable.c
+ FwVol.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ StandaloneMmPkg/StandaloneMmPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ BaseMemoryLib
+ CacheMaintenanceLib
+ DebugLib
+ FvLib
+ HobLib
+ MemoryAllocationLib
+ MemLib
+ PeCoffLib
+ ReportStatusCodeLib
+ StandaloneMmCoreEntryPoint
+
+[Protocols]
+ gEfiDxeMmReadyToLockProtocolGuid ## UNDEFINED # SmiHandlerRegister
+ gEfiMmReadyToLockProtocolGuid ## PRODUCES
+ gEfiMmEndOfDxeProtocolGuid ## PRODUCES
+ gEfiLoadedImageProtocolGuid ## PRODUCES
+ gEfiMmConfigurationProtocolGuid ## CONSUMES
+
+[Guids]
+ gAprioriGuid ## SOMETIMES_CONSUMES ## File
+ gEfiEventDxeDispatchGuid ## PRODUCES ## GUID # SmiHandlerRegister
+ gEfiEndOfDxeEventGroupGuid ## PRODUCES ## GUID # SmiHandlerRegister
+ ## SOMETIMES_CONSUMES ## GUID # Locate protocol
+ ## SOMETIMES_PRODUCES ## GUID # SmiHandlerRegister
+ gEdkiiMemoryProfileGuid
+ gZeroGuid ## SOMETIMES_CONSUMES ## GUID
+ gEfiHobListGuid
+ gMmCoreDataHobGuid
+ gMmFvDispatchGuid
+ gEfiEventLegacyBootGuid
+ gEfiEventExitBootServicesGuid
+ gEfiEventReadyToBootGuid
diff --git a/StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h b/StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
new file mode 100644
index 0000000000..faedf3ff2d
--- /dev/null
+++ b/StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
@@ -0,0 +1,66 @@
+/** @file
+ The internal header file that declared a data structure that is shared
+ between the MM IPL and the MM Core.
+
+ Copyright (c) 2009 - 2014, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+ This program and the accompanying materials are licensed and made available
+ under the terms and conditions of the BSD License which accompanies this
+ distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _STANDALONE_MM_CORE_PRIVATE_DATA_H_
+#define _STANDALONE_MM_CORE_PRIVATE_DATA_H_
+
+#include <Guid/MmCoreData.h>
+
+//
+// Page management
+//
+
+typedef struct {
+ LIST_ENTRY Link;
+ UINTN NumberOfPages;
+} FREE_PAGE_LIST;
+
+extern LIST_ENTRY mMmMemoryMap;
+
+//
+// Pool management
+//
+
+//
+// MIN_POOL_SHIFT must not be less than 5
+//
+#define MIN_POOL_SHIFT 6
+#define MIN_POOL_SIZE (1 << MIN_POOL_SHIFT)
+
+//
+// MAX_POOL_SHIFT must not be less than EFI_PAGE_SHIFT - 1
+//
+#define MAX_POOL_SHIFT (EFI_PAGE_SHIFT - 1)
+#define MAX_POOL_SIZE (1 << MAX_POOL_SHIFT)
+
+//
+// MAX_POOL_INDEX are calculated by maximum and minimum pool sizes
+//
+#define MAX_POOL_INDEX (MAX_POOL_SHIFT - MIN_POOL_SHIFT + 1)
+
+typedef struct {
+ UINTN Size;
+ BOOLEAN Available;
+} POOL_HEADER;
+
+typedef struct {
+ POOL_HEADER Header;
+ LIST_ENTRY Link;
+} FREE_POOL_HEADER;
+
+extern LIST_ENTRY mMmPoolLists[MAX_POOL_INDEX];
+
+#endif
diff --git a/StandaloneMmPkg/Include/Guid/MmFvDispatch.h b/StandaloneMmPkg/Include/Guid/MmFvDispatch.h
new file mode 100644
index 0000000000..fb194d3474
--- /dev/null
+++ b/StandaloneMmPkg/Include/Guid/MmFvDispatch.h
@@ -0,0 +1,38 @@
+/** @file
+ GUIDs for MM Event.
+
+Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+
+This program and the accompanying materials are licensed and made available under
+the terms and conditions of the BSD License that accompanies this distribution.
+The full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php.
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __MM_FV_DISPATCH_H__
+#define __MM_FV_DISPATCH_H__
+
+#define MM_FV_DISPATCH_GUID \
+ { 0xb65694cc, 0x9e3, 0x4c3b, { 0xb5, 0xcd, 0x5, 0xf4, 0x4d, 0x3c, 0xdb, 0xff }}
+
+extern EFI_GUID gMmFvDispatchGuid;
+
+#pragma pack(1)
+typedef struct {
+ EFI_PHYSICAL_ADDRESS Address;
+ UINT64 Size;
+} EFI_MM_COMMUNICATE_FV_DISPATCH_DATA;
+
+typedef struct {
+ EFI_GUID HeaderGuid;
+ UINTN MessageLength;
+ EFI_MM_COMMUNICATE_FV_DISPATCH_DATA Data;
+} EFI_MM_COMMUNICATE_FV_DISPATCH;
+#pragma pack()
+
+#endif
diff --git a/StandaloneMmPkg/Include/StandaloneMm.h b/StandaloneMmPkg/Include/StandaloneMm.h
new file mode 100644
index 0000000000..0e420315bb
--- /dev/null
+++ b/StandaloneMmPkg/Include/StandaloneMm.h
@@ -0,0 +1,36 @@
+/** @file
+ Standalone MM.
+
+Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2016 - 2017, ARM Limited. All rights reserved.<BR>
+
+This program and the accompanying materials
+are licensed and made available under the terms and conditions
+of the BSD License which accompanies this distribution. The
+full text of the license may be found at
+http://opensource.org/licenses/bsd-license.php
+
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef _STANDALONE_MM_H_
+#define _STANDALONE_MM_H_
+
+#include <PiMm.h>
+
+typedef
+EFI_STATUS
+(EFIAPI *MM_IMAGE_ENTRY_POINT) (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_MM_SYSTEM_TABLE *MmSystemTable
+ );
+
+typedef
+EFI_STATUS
+(EFIAPI *STANDALONE_MM_FOUNDATION_ENTRY_POINT) (
+ IN VOID *HobStart
+ );
+
+#endif
--
2.14.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
2017-11-17 23:07 [RFC v1 00/15] *** Proposal for StandaloneMmPkg *** Supreeth Venkatesh
2017-11-17 23:08 ` [RFC v1 13/15] StandaloneMmPkg/Core: Implementation of Standalone MM Core Module Supreeth Venkatesh
@ 2017-11-18 20:10 ` Rebecca Cran
2017-11-20 15:49 ` Supreeth Venkatesh
2017-11-28 7:00 ` Yao, Jiewen
2 siblings, 1 reply; 10+ messages in thread
From: Rebecca Cran @ 2017-11-18 20:10 UTC (permalink / raw)
To: Supreeth Venkatesh, edk2-devel; +Cc: jiewen.yao, leif.lindholm
Could there be any confusion between 'MM' meaning Management Mode and
Memory Management?
--
Rebecca
On 11/17/2017 4:07 PM, Supreeth Venkatesh wrote:
> ***
> PI Specification v1.5 "Volume 4: Management Mode Core Interface"
> introduces the concept of MM Standalone Mode. Initialization of this mode
> can be done during the SEC phase (Section 1.5.2).
> On ARMv8-A systems, ARM Trusted Firmware is responsible for launching
> the normal world firmware e.g. UEFI.
>
> The Standalone MM environment is instantiated in Secure EL0 as a separate
> firmware volume. It executes as BL32 Image under control of ARM TF
> which is instantiated in EL3. Both components execute in the AArch64 execution state.
> This patchset will build upon the StandaloneSmmPkg module originally
> contributed by Intel.
>
> This package can be used in conjunction with ARM Trusted Firmware
> to recreate a simple MM secure environment that demonstrates communication
> between two UEFI images where one is executing in the normal world and the other is
> executing in the secure world.
>
> The normal world image includes:
> MM Communication DXE runtime driver that implements the protocol for communication
> with the MM environment in the secure world.
>
> The secure world image includes:
> The MM Standalone framework.
>
> This RFC patchset includes the proposed organization/structure and
> has architecture agnostic core changes only as a first pass.
> Once the organization/structure have been agreed upon, patchset for
> supporting libraries and AARCH64 implementation will be sent.
>
> Steps to build MM Standalone images
> In user preferred "work" directory, execute the following shell commands
>
> git clone https://github.com/tianocore/edk2.git
> git checkout master
>
> git clone https://github.com/tianocore/edk2-platforms.git
> git checkout master
>
> mkdir arm-tf
> cd arm-tf
> git clone https://github.com/ARM-software/arm-trusted-firmware.git .
> git checkout master
> cd ..
>
> git clone https://git.linaro.org/uefi/uefi-tools.git .
> git checkout master
>
> The following will build the MM Standalone image which runs in secure world.
> ./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
>
> The follwing will build the normal world UEFI image, ARM Trusted Firmware and
> a Firmware Image Package (FIP) that includes both the UEFI images.
> ./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
>
> Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware image package (fip) binary will be generated at:
>
> Build Output
> Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
> Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
>
> Steps to run MM Standalone image
> 1. Download the ARMv8 Architecture FVP from
> https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
> For more information, please refer
> https://developer.arm.com/products/system-design/fixed-virtual-platforms
> 2. Install FVP into preferred "work" directory.
> 3. Create a shell script "run_mm.sh" in the same folder where "FVP_Base_AEMv8A-AEMv8A" is present.
> Sample Shell script below:
> ./FVP_Base_AEMv8A-AEMv8A
> -C cache_state_modelled=0
> -C bp.secure_memory=1
> -C bp.tzc_400.diagnostics=1
> -C bp.pl011_uart0.untimed_fifos=0
> -C cluster1.NUM_CORES=4
> -C cluster0.NUM_CORES=4
> -C bp.pl011_uart0.out_file=uart0.output
> -C bp.pl011_uart1.out_file=uart1.output
> -C bp.pl011_uart2.out_file=uart2.output
> -C bp.pl011_uart3.out_file=uart3.output
> -C bp.secureflashloader.fname=""
> -C bp.flashloader0.fname=""
> -S -R
> 4. ./run_mm.sh
> 5. Output can be seen on FVP console.
> 6. The normal world will boot to the UEFI shell.
>
> Sample Output
>
> MM Standalone Output (FVP UART2)
> SPM Version: Major=0x0, Minor=0x1
> NumSpMemRegions - 0x6
> SpMemBase - 0xFF200000
> SpMemLimit - 0x100000000
> SpImageBase - 0xFF200000
> SpStackBase - 0xFF610000
> SpHeapBase - 0xFF620000
> SpNsCommBufBase - 0xFF600000
> SpSharedBufBase - 0xFF500000
> SpImageSize - 0x300000
> SpPcpuStackSize - 0x2000
> SpHeapSize - 0x9E0000
> SpNsCommBufSize - 0x10000
> SpPcpuSharedBufSize - 0x20000
> NumCpus - 0x8
> CpuInfo - 0xFF500680
> Mpidr - 0x80000000
> LinearId - 0x0
> Flags - 0x1
> Mpidr - 0x80000001
> LinearId - 0x1
> Flags - 0x0
> Mpidr - 0x80000002
> LinearId - 0x2
> Flags - 0x0
> Mpidr - 0x80000003
> LinearId - 0x3
> Flags - 0x0
> Mpidr - 0x80000100
> LinearId - 0x4
> Flags - 0x0
> Mpidr - 0x80000101
> LinearId - 0x5
> Flags - 0x0
> Mpidr - 0x80000102
> LinearId - 0x6
> Flags - 0x0
> Mpidr - 0x80000103
> LinearId - 0x7
> Flags - 0x0
> Found Standalone MM PE data - 0xFF201000
> Found Standalone MM PE data - 0xFF201000
> Standalone MM Core PE-COFF SectionHeaderOffset - 0xF60, NumberOfSections - 3
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0x60000020 permissions
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has .et name
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0xFF202000 address
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0x1000 data
> UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image at 0xFF201000 with 0x60000020 permissions
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0xC0000040 permissions
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has .aa name
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0xFF217000 address
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0x16000 data
> UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at 0xFF201000 with RW-XN permissions
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0x42000040 permissions
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has .eo name
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0xFF218000 address
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0x17000 data
> UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at 0xFF201000 with RO-XN permissions
> StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
> MmramRangeCount - 0x6
> MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
> MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
> MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
> MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
> MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
> MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
> MmInitializeMemoryServices
> MmAddMemoryRegion 0 : 0x00000000FF200000 - 0x0000000000300000
> MmAddMemoryRegion 1 : 0x00000000FF500000 - 0x0000000000100000
> MmAddMemoryRegion 2 : 0x00000000FF600000 - 0x0000000000010000
> MmAddMemoryRegion 3 : 0x00000000FF610000 - 0x0000000000010000
> MmAddMemoryRegion 4 : 0x00000000FF620000 - 0x00000000000002C8
> MmAddMemoryRegion 5 : 0x00000000FF6202C8 - 0x00000000009DFD38
> mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF
> MmMain - 0xFF620000
> MmramRangeCount - 0x6
> MmramRanges[0]: 0x00000000FF200000 - 0x300000
> MmramRanges[1]: 0x00000000FF500000 - 0x100000
> MmramRanges[2]: 0x00000000FF600000 - 0x10000
> MmramRanges[3]: 0x00000000FF610000 - 0x10000
> MmramRanges[4]: 0x00000000FF620000 - 0x2C8
> MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38
> mMmramRangeCount - 0x6
> mMmramRanges - 0xFFFFEE10
> BFV address - 0xFF200000
> BFV size - 0x300000
> MmInstallConfigurationTable For HobList
> HobSize - 0x2C8
> MmHobStart - 0xFFFFE810
> MmRegisterProtocolNotify - MmConfigurationMmProtocol
> Mm Dispatch StandaloneBfvAddress - 0xFF200000
> MmCoreFfsFindMmDriver - 0xFF200000
> FvIsBeingProcesssed - 0xFF200000
> Check MmFileTypes - 0xA
> Check MmFileTypes - 0xE
> Find PE data - 0xFF219024
> MmAddToDriverList - 58F7A62B-6280-42A7-BC38-10535A64A92C (0xFF219024)
> MmDispatcher
> Drain the Scheduled Queue
> Search DriverList for items to place on Scheduled Queue
> DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
> TRUE
> END
> RESULT = TRUE
> Drain the Scheduled Queue
> DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
> UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-XN permissions and size 0x7000
> UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-X permissions and size 0x7000
> UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000 with RW-XN permissions and size 0x1000
> UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000 with RO-XN permissions and size 0x1000
> add-symbol-file /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5/AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000
> Loading MM driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000 PiMmStandloneArmTfCpuDriver.efi
> StartImage - 0xFFFE7000 (Standalone Mode)
> MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7 FFFEE008
> MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) - FFFEE008
> MM Core registered MM Entry Point address FF2041C0
> MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569 FFFEE018
> Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
> mNsCommBuffer.PhysicalStart - 0xFF600000
> mNsCommBuffer.PhysicalSize - 0x10000
> mNsCommBuffer: 0x00000000FF600000 - 0x10000
> mMpInformationHobData: 0x0000000000000008 - 0x8
> mMpInformationHobData[0x80000000]: 0, 0, 0
> mMpInformationHobData[0x80000001]: 0, 1, 1
> mMpInformationHobData[0x80000002]: 0, 2, 2
> mMpInformationHobData[0x80000003]: 0, 3, 3
> mMpInformationHobData[0x80000100]: 1, 0, 0
> mMpInformationHobData[0x80000101]: 1, 1, 1
> mMpInformationHobData[0x80000102]: 1, 2, 2
> mMpInformationHobData[0x80000103]: 1, 3, 3
> MmiHandlerRegister - GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF - Status 0
> MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 - Status 0
> MmiHandlerRegister - GUID 60FF8964-E906-41D0-AFED-F241E974E08E - Status 0
> MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 - Status 0
> MmiHandlerRegister - GUID 2A571201-4966-47F6-8B86-F31E41F32F10 - Status 0
> MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF - Status 0
> MmiHandlerRegister - GUID 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B - Status 0
> MmMain Done!
> Shared Cpu Driver EP 0xFFFE798C
>
> ARM TF (FVP UART0)
> NOTICE: Booting Trusted Firmware
> NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL1: Built : 16:14:26, Nov 1 2017
> INFO: BL1: RAM 0x4036000 - 0x403c000
> INFO: BL1: Loading BL2
> INFO: Loading image id=1 at address 0x4027000
> INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
> NOTICE: BL1: Booting BL2
> INFO: Entry point address = 0x4027000
> INFO: SPSR = 0x3c5
> NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL2: Built : 16:14:26, Nov 1 2017
> INFO: BL2: Doing platform setup
> INFO: Configuring TrustZone Controller
> INFO: BL2: Loading image id 3
> INFO: Loading image id=3 at address 0xff000000
> INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
> INFO: BL2: Loading image id 4
> INFO: Loading image id=4 at address 0xff200000
> INFO: Image id=4 loaded: 0xff200000 - 0xff480000
> INFO: BL2: Loading image id 5
> INFO: Loading image id=5 at address 0x88000000
> INFO: Image id=5 loaded: 0x88000000 - 0x88280000
> NOTICE: BL1: Booting BL31
> INFO: Entry point address = 0xff000000
> INFO: SPSR = 0x3cd
> NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL31: Built : 16:14:26, Nov 1 2017
> INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
> INFO: BL31: Initializing runtime services
> INFO: BL31: Initializing BL32
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff217000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff217000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x5
> NOTICE: (Equivalent TF attributes: 0x2a)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff218000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffe7000
> NOTICE: Number of pages: 7 (28672 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffe7000
> NOTICE: Number of pages: 7 (28672 bytes)
> NOTICE: Attributes : 0x3
> NOTICE: (Equivalent TF attributes: 0x2)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffef000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> INFO: BL31: Preparing for EL3 exit to normal world
> INFO: Entry point address = 0x88000000
> INFO: SPSR = 0x3c9
> UEFI firmware (version built at 16:14:14 on Nov 1 2017)
>
> ***
>
> Supreeth Venkatesh (15):
> ArmPkg/Include: Add MM interface SVC return codes.
> BaseTools/AutoGen: Update header file for MM modules.
> ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
> MdePkg/Include: Add management mode FV file type and depex.
> StandaloneMmPkg/StandaloneMmCoreEntryPoint: Add an AArch64 specific
> entry point library.
> StandaloneMmPkg/HobLib: Add a common HOB Library for management mode.
> StandaloneMmPkg/FvLib: Add a common FV Library for management mode.
> StandaloneMmPkg/MemLib: Instance of management mode memory check
> library.
> StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library.
> StandaloneMmPkg/StandaloneMmDriverEntryPoint: MM driver entry point
> library.
> StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Standard
> Platforms.
> StandaloneMmPkg/Core: Implementation of Standalone MM Core Module.
> StandaloneMmPkg: Describe the package declaration, definition and fdf
> files.
> ArmPkg/DebugPeCoffExtraActionLib: Add UpdatePeCoffPermissions for
> S-ELO MM.
>
> ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146 +++
> ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
> .../DebugPeCoffExtraActionLib.c | 167 ++-
> .../DebugPeCoffExtraActionLib.inf | 7 +
> BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
> MdePkg/Include/Pi/PiFirmwareFile.h | 4 +
> StandaloneMmPkg/Core/Dependency.c | 389 +++++++
> StandaloneMmPkg/Core/Dispatcher.c | 1071 ++++++++++++++++++++
> StandaloneMmPkg/Core/FwVol.c | 104 ++
> StandaloneMmPkg/Core/Handle.c | 533 ++++++++++
> StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
> StandaloneMmPkg/Core/Locate.c | 496 +++++++++
> StandaloneMmPkg/Core/Mmi.c | 337 ++++++
> StandaloneMmPkg/Core/Notify.c | 203 ++++
> StandaloneMmPkg/Core/Page.c | 384 +++++++
> StandaloneMmPkg/Core/Pool.c | 287 ++++++
> StandaloneMmPkg/Core/StandaloneMmCore.c | 708 +++++++++++++
> StandaloneMmPkg/Core/StandaloneMmCore.h | 903 +++++++++++++++++
> StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
> StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
> StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
> StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231 +++++
> StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 225 ++++
> .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
> .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
> StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
> StandaloneMmPkg/Include/Guid/MmCoreData.h | 132 +++
> StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
> StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
> StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
> .../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
> StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
> StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
> .../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
> .../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
> StandaloneMmPkg/Include/StandaloneMm.h | 36 +
> StandaloneMmPkg/Library/FvLib/FvLib.c | 366 +++++++
> StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
> StandaloneMmPkg/Library/HobLib/HobLib.c | 697 +++++++++++++
> StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
> StandaloneMmPkg/Library/MemLib/MemLib.c | 276 +++++
> StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
> .../MemoryAllocationLib/MemoryAllocationLib.c | 901 ++++++++++++++++
> .../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
> .../MemoryAllocationLib/MemoryAllocationServices.h | 117 +++
> .../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
> .../Arm/SetPermissions.c | 278 +++++
> .../Arm/StandaloneMmCoreEntryPoint.c | 265 +++++
> .../StandaloneMmCoreEntryPoint.inf | 53 +
> .../StandaloneMmDriverEntryPoint.c | 102 ++
> .../StandaloneMmDriverEntryPoint.inf | 41 +
> StandaloneMmPkg/StandaloneMmPkg.dec | 47 +
> StandaloneMmPkg/StandaloneMmPkg.dsc | 132 +++
> StandaloneMmPkg/StandaloneMmPkg.fdf | 184 ++++
> 55 files changed, 11699 insertions(+), 11 deletions(-)
> create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
> create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
> create mode 100644 StandaloneMmPkg/Core/Dependency.c
> create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
> create mode 100644 StandaloneMmPkg/Core/FwVol.c
> create mode 100644 StandaloneMmPkg/Core/Handle.c
> create mode 100644 StandaloneMmPkg/Core/InstallConfigurationTable.c
> create mode 100644 StandaloneMmPkg/Core/Locate.c
> create mode 100644 StandaloneMmPkg/Core/Mmi.c
> create mode 100644 StandaloneMmPkg/Core/Notify.c
> create mode 100644 StandaloneMmPkg/Core/Page.c
> create mode 100644 StandaloneMmPkg/Core/Pool.c
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
> create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
> create mode 100644 StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
> create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
> create mode 100644 StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
> create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
> create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
> create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.c
> create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
> create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.c
> create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
> create mode 100644 StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
> create mode 100644 StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.inf
> create mode 100644 StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationServices.h
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobList.c
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissions.c
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMmCoreEntryPoint.c
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.c
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
2017-11-18 20:10 ` [RFC v1 00/15] *** Proposal for StandaloneMmPkg *** Rebecca Cran
@ 2017-11-20 15:49 ` Supreeth Venkatesh
0 siblings, 0 replies; 10+ messages in thread
From: Supreeth Venkatesh @ 2017-11-20 15:49 UTC (permalink / raw)
To: Rebecca Cran, edk2-devel@lists.01.org
Cc: jiewen.yao@intel.com, leif.lindholm@linaro.org, Achin Gupta
Rebecca,
Thanks for your comment. I too did wonder that.
However, "MM" abbreviation is used multiple times
in PI Specification v1.5 "Volume 4: Management Mode Core Interface"
Also, since the package is going to be called "StandaloneMmPkg" and not just MM, thereby avoiding
intersection with Memory Management.
Supreeth
-----Original Message-----
From: Rebecca Cran [mailto:rebecca@bluestop.org]
Sent: Saturday, November 18, 2017 2:11 PM
To: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>; edk2-devel@lists.01.org
Cc: jiewen.yao@intel.com; leif.lindholm@linaro.org
Subject: Re: [edk2] [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
Could there be any confusion between 'MM' meaning Management Mode and Memory Management?
--
Rebecca
On 11/17/2017 4:07 PM, Supreeth Venkatesh wrote:
> ***
> PI Specification v1.5 "Volume 4: Management Mode Core Interface"
> introduces the concept of MM Standalone Mode. Initialization of this mode
> can be done during the SEC phase (Section 1.5.2).
> On ARMv8-A systems, ARM Trusted Firmware is responsible for launching
> the normal world firmware e.g. UEFI.
>
> The Standalone MM environment is instantiated in Secure EL0 as a separate
> firmware volume. It executes as BL32 Image under control of ARM TF
> which is instantiated in EL3. Both components execute in the AArch64 execution state.
> This patchset will build upon the StandaloneSmmPkg module originally
> contributed by Intel.
>
> This package can be used in conjunction with ARM Trusted Firmware
> to recreate a simple MM secure environment that demonstrates communication
> between two UEFI images where one is executing in the normal world and the other is
> executing in the secure world.
>
> The normal world image includes:
> MM Communication DXE runtime driver that implements the protocol for communication
> with the MM environment in the secure world.
>
> The secure world image includes:
> The MM Standalone framework.
>
> This RFC patchset includes the proposed organization/structure and
> has architecture agnostic core changes only as a first pass.
> Once the organization/structure have been agreed upon, patchset for
> supporting libraries and AARCH64 implementation will be sent.
>
> Steps to build MM Standalone images
> In user preferred "work" directory, execute the following shell commands
>
> git clone https://github.com/tianocore/edk2.git
> git checkout master
>
> git clone https://github.com/tianocore/edk2-platforms.git
> git checkout master
>
> mkdir arm-tf
> cd arm-tf
> git clone https://github.com/ARM-software/arm-trusted-firmware.git .
> git checkout master
> cd ..
>
> git clone https://git.linaro.org/uefi/uefi-tools.git .
> git checkout master
>
> The following will build the MM Standalone image which runs in secure world.
> ./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
>
> The follwing will build the normal world UEFI image, ARM Trusted Firmware and
> a Firmware Image Package (FIP) that includes both the UEFI images.
> ./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
>
> Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware image package (fip) binary will be generated at:
>
> Build Output
> Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
> Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
>
> Steps to run MM Standalone image
> 1. Download the ARMv8 Architecture FVP from
> https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
> For more information, please refer
> https://developer.arm.com/products/system-design/fixed-virtual-platforms
> 2. Install FVP into preferred "work" directory.
> 3. Create a shell script "run_mm.sh" in the same folder where "FVP_Base_AEMv8A-AEMv8A" is present.
> Sample Shell script below:
> ./FVP_Base_AEMv8A-AEMv8A
> -C cache_state_modelled=0
> -C bp.secure_memory=1
> -C bp.tzc_400.diagnostics=1
> -C bp.pl011_uart0.untimed_fifos=0
> -C cluster1.NUM_CORES=4
> -C cluster0.NUM_CORES=4
> -C bp.pl011_uart0.out_file=uart0.output
> -C bp.pl011_uart1.out_file=uart1.output
> -C bp.pl011_uart2.out_file=uart2.output
> -C bp.pl011_uart3.out_file=uart3.output
> -C bp.secureflashloader.fname=""
> -C bp.flashloader0.fname=""
> -S -R
> 4. ./run_mm.sh
> 5. Output can be seen on FVP console.
> 6. The normal world will boot to the UEFI shell.
>
> Sample Output
>
> MM Standalone Output (FVP UART2)
> SPM Version: Major=0x0, Minor=0x1
> NumSpMemRegions - 0x6
> SpMemBase - 0xFF200000
> SpMemLimit - 0x100000000
> SpImageBase - 0xFF200000
> SpStackBase - 0xFF610000
> SpHeapBase - 0xFF620000
> SpNsCommBufBase - 0xFF600000
> SpSharedBufBase - 0xFF500000
> SpImageSize - 0x300000
> SpPcpuStackSize - 0x2000
> SpHeapSize - 0x9E0000
> SpNsCommBufSize - 0x10000
> SpPcpuSharedBufSize - 0x20000
> NumCpus - 0x8
> CpuInfo - 0xFF500680
> Mpidr - 0x80000000
> LinearId - 0x0
> Flags - 0x1
> Mpidr - 0x80000001
> LinearId - 0x1
> Flags - 0x0
> Mpidr - 0x80000002
> LinearId - 0x2
> Flags - 0x0
> Mpidr - 0x80000003
> LinearId - 0x3
> Flags - 0x0
> Mpidr - 0x80000100
> LinearId - 0x4
> Flags - 0x0
> Mpidr - 0x80000101
> LinearId - 0x5
> Flags - 0x0
> Mpidr - 0x80000102
> LinearId - 0x6
> Flags - 0x0
> Mpidr - 0x80000103
> LinearId - 0x7
> Flags - 0x0
> Found Standalone MM PE data - 0xFF201000
> Found Standalone MM PE data - 0xFF201000
> Standalone MM Core PE-COFF SectionHeaderOffset - 0xF60, NumberOfSections - 3
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0x60000020 permissions
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has .et name
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0xFF202000 address
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has 0x1000 data
> UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image at 0xFF201000 with 0x60000020 permissions
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0xC0000040 permissions
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has .aa name
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0xFF217000 address
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has 0x16000 data
> UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at 0xFF201000 with RW-XN permissions
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0x42000040 permissions
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has .eo name
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0xFF218000 address
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has 0x17000 data
> UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at 0xFF201000 with RO-XN permissions
> StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
> MmramRangeCount - 0x6
> MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
> MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
> MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
> MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
> MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
> MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
> MmInitializeMemoryServices
> MmAddMemoryRegion 0 : 0x00000000FF200000 - 0x0000000000300000
> MmAddMemoryRegion 1 : 0x00000000FF500000 - 0x0000000000100000
> MmAddMemoryRegion 2 : 0x00000000FF600000 - 0x0000000000010000
> MmAddMemoryRegion 3 : 0x00000000FF610000 - 0x0000000000010000
> MmAddMemoryRegion 4 : 0x00000000FF620000 - 0x00000000000002C8
> MmAddMemoryRegion 5 : 0x00000000FF6202C8 - 0x00000000009DFD38
> mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF
> MmMain - 0xFF620000
> MmramRangeCount - 0x6
> MmramRanges[0]: 0x00000000FF200000 - 0x300000
> MmramRanges[1]: 0x00000000FF500000 - 0x100000
> MmramRanges[2]: 0x00000000FF600000 - 0x10000
> MmramRanges[3]: 0x00000000FF610000 - 0x10000
> MmramRanges[4]: 0x00000000FF620000 - 0x2C8
> MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38
> mMmramRangeCount - 0x6
> mMmramRanges - 0xFFFFEE10
> BFV address - 0xFF200000
> BFV size - 0x300000
> MmInstallConfigurationTable For HobList
> HobSize - 0x2C8
> MmHobStart - 0xFFFFE810
> MmRegisterProtocolNotify - MmConfigurationMmProtocol
> Mm Dispatch StandaloneBfvAddress - 0xFF200000
> MmCoreFfsFindMmDriver - 0xFF200000
> FvIsBeingProcesssed - 0xFF200000
> Check MmFileTypes - 0xA
> Check MmFileTypes - 0xE
> Find PE data - 0xFF219024
> MmAddToDriverList - 58F7A62B-6280-42A7-BC38-10535A64A92C (0xFF219024)
> MmDispatcher
> Drain the Scheduled Queue
> Search DriverList for items to place on Scheduled Queue
> DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
> TRUE
> END
> RESULT = TRUE
> Drain the Scheduled Queue
> DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
> UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-XN permissions and size 0x7000
> UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-X permissions and size 0x7000
> UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000 with RW-XN permissions and size 0x1000
> UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000 with RO-XN permissions and size 0x1000
> add-symbol-file /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5/AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000
> Loading MM driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000 PiMmStandloneArmTfCpuDriver.efi
> StartImage - 0xFFFE7000 (Standalone Mode)
> MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7 FFFEE008
> MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) - FFFEE008
> MM Core registered MM Entry Point address FF2041C0
> MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569 FFFEE018
> Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
> mNsCommBuffer.PhysicalStart - 0xFF600000
> mNsCommBuffer.PhysicalSize - 0x10000
> mNsCommBuffer: 0x00000000FF600000 - 0x10000
> mMpInformationHobData: 0x0000000000000008 - 0x8
> mMpInformationHobData[0x80000000]: 0, 0, 0
> mMpInformationHobData[0x80000001]: 0, 1, 1
> mMpInformationHobData[0x80000002]: 0, 2, 2
> mMpInformationHobData[0x80000003]: 0, 3, 3
> mMpInformationHobData[0x80000100]: 1, 0, 0
> mMpInformationHobData[0x80000101]: 1, 1, 1
> mMpInformationHobData[0x80000102]: 1, 2, 2
> mMpInformationHobData[0x80000103]: 1, 3, 3
> MmiHandlerRegister - GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF - Status 0
> MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 - Status 0
> MmiHandlerRegister - GUID 60FF8964-E906-41D0-AFED-F241E974E08E - Status 0
> MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 - Status 0
> MmiHandlerRegister - GUID 2A571201-4966-47F6-8B86-F31E41F32F10 - Status 0
> MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF - Status 0
> MmiHandlerRegister - GUID 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B - Status 0
> MmMain Done!
> Shared Cpu Driver EP 0xFFFE798C
>
> ARM TF (FVP UART0)
> NOTICE: Booting Trusted Firmware
> NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL1: Built : 16:14:26, Nov 1 2017
> INFO: BL1: RAM 0x4036000 - 0x403c000
> INFO: BL1: Loading BL2
> INFO: Loading image id=1 at address 0x4027000
> INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
> NOTICE: BL1: Booting BL2
> INFO: Entry point address = 0x4027000
> INFO: SPSR = 0x3c5
> NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL2: Built : 16:14:26, Nov 1 2017
> INFO: BL2: Doing platform setup
> INFO: Configuring TrustZone Controller
> INFO: BL2: Loading image id 3
> INFO: Loading image id=3 at address 0xff000000
> INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
> INFO: BL2: Loading image id 4
> INFO: Loading image id=4 at address 0xff200000
> INFO: Image id=4 loaded: 0xff200000 - 0xff480000
> INFO: BL2: Loading image id 5
> INFO: Loading image id=5 at address 0x88000000
> INFO: Image id=5 loaded: 0x88000000 - 0x88280000
> NOTICE: BL1: Booting BL31
> INFO: Entry point address = 0xff000000
> INFO: SPSR = 0x3cd
> NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL31: Built : 16:14:26, Nov 1 2017
> INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
> INFO: BL31: Initializing runtime services
> INFO: BL31: Initializing BL32
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff217000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff217000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x5
> NOTICE: (Equivalent TF attributes: 0x2a)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff218000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffe7000
> NOTICE: Number of pages: 7 (28672 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffe7000
> NOTICE: Number of pages: 7 (28672 bytes)
> NOTICE: Attributes : 0x3
> NOTICE: (Equivalent TF attributes: 0x2)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffef000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> INFO: BL31: Preparing for EL3 exit to normal world
> INFO: Entry point address = 0x88000000
> INFO: SPSR = 0x3c9
> UEFI firmware (version built at 16:14:14 on Nov 1 2017)
>
> ***
>
> Supreeth Venkatesh (15):
> ArmPkg/Include: Add MM interface SVC return codes.
> BaseTools/AutoGen: Update header file for MM modules.
> ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
> MdePkg/Include: Add management mode FV file type and depex.
> StandaloneMmPkg/StandaloneMmCoreEntryPoint: Add an AArch64 specific
> entry point library.
> StandaloneMmPkg/HobLib: Add a common HOB Library for management mode.
> StandaloneMmPkg/FvLib: Add a common FV Library for management mode.
> StandaloneMmPkg/MemLib: Instance of management mode memory check
> library.
> StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library.
> StandaloneMmPkg/StandaloneMmDriverEntryPoint: MM driver entry point
> library.
> StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Standard
> Platforms.
> StandaloneMmPkg/Core: Implementation of Standalone MM Core Module.
> StandaloneMmPkg: Describe the package declaration, definition and fdf
> files.
> ArmPkg/DebugPeCoffExtraActionLib: Add UpdatePeCoffPermissions for
> S-ELO MM.
>
> ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146 +++
> ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
> .../DebugPeCoffExtraActionLib.c | 167 ++-
> .../DebugPeCoffExtraActionLib.inf | 7 +
> BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
> MdePkg/Include/Pi/PiFirmwareFile.h | 4 +
> StandaloneMmPkg/Core/Dependency.c | 389 +++++++
> StandaloneMmPkg/Core/Dispatcher.c | 1071 ++++++++++++++++++++
> StandaloneMmPkg/Core/FwVol.c | 104 ++
> StandaloneMmPkg/Core/Handle.c | 533 ++++++++++
> StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
> StandaloneMmPkg/Core/Locate.c | 496 +++++++++
> StandaloneMmPkg/Core/Mmi.c | 337 ++++++
> StandaloneMmPkg/Core/Notify.c | 203 ++++
> StandaloneMmPkg/Core/Page.c | 384 +++++++
> StandaloneMmPkg/Core/Pool.c | 287 ++++++
> StandaloneMmPkg/Core/StandaloneMmCore.c | 708 +++++++++++++
> StandaloneMmPkg/Core/StandaloneMmCore.h | 903 +++++++++++++++++
> StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
> StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
> StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
> StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231 +++++
> StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 225 ++++
> .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
> .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
> StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
> StandaloneMmPkg/Include/Guid/MmCoreData.h | 132 +++
> StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
> StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
> StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
> .../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
> StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
> StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
> .../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
> .../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
> StandaloneMmPkg/Include/StandaloneMm.h | 36 +
> StandaloneMmPkg/Library/FvLib/FvLib.c | 366 +++++++
> StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
> StandaloneMmPkg/Library/HobLib/HobLib.c | 697 +++++++++++++
> StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
> StandaloneMmPkg/Library/MemLib/MemLib.c | 276 +++++
> StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
> .../MemoryAllocationLib/MemoryAllocationLib.c | 901 ++++++++++++++++
> .../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
> .../MemoryAllocationLib/MemoryAllocationServices.h | 117 +++
> .../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
> .../Arm/SetPermissions.c | 278 +++++
> .../Arm/StandaloneMmCoreEntryPoint.c | 265 +++++
> .../StandaloneMmCoreEntryPoint.inf | 53 +
> .../StandaloneMmDriverEntryPoint.c | 102 ++
> .../StandaloneMmDriverEntryPoint.inf | 41 +
> StandaloneMmPkg/StandaloneMmPkg.dec | 47 +
> StandaloneMmPkg/StandaloneMmPkg.dsc | 132 +++
> StandaloneMmPkg/StandaloneMmPkg.fdf | 184 ++++
> 55 files changed, 11699 insertions(+), 11 deletions(-)
> create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
> create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
> create mode 100644 StandaloneMmPkg/Core/Dependency.c
> create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
> create mode 100644 StandaloneMmPkg/Core/FwVol.c
> create mode 100644 StandaloneMmPkg/Core/Handle.c
> create mode 100644 StandaloneMmPkg/Core/InstallConfigurationTable.c
> create mode 100644 StandaloneMmPkg/Core/Locate.c
> create mode 100644 StandaloneMmPkg/Core/Mmi.c
> create mode 100644 StandaloneMmPkg/Core/Notify.c
> create mode 100644 StandaloneMmPkg/Core/Page.c
> create mode 100644 StandaloneMmPkg/Core/Pool.c
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
> create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
> create mode 100644 StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
> create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
> create mode 100644 StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
> create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
> create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
> create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.c
> create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
> create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.c
> create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
> create mode 100644 StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
> create mode 100644 StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.inf
> create mode 100644 StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationServices.h
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobList.c
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissions.c
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMmCoreEntryPoint.c
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreEntryPoint.inf
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.c
> create mode 100644 StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriverEntryPoint.inf
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
>
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
2017-11-17 23:07 [RFC v1 00/15] *** Proposal for StandaloneMmPkg *** Supreeth Venkatesh
2017-11-17 23:08 ` [RFC v1 13/15] StandaloneMmPkg/Core: Implementation of Standalone MM Core Module Supreeth Venkatesh
2017-11-18 20:10 ` [RFC v1 00/15] *** Proposal for StandaloneMmPkg *** Rebecca Cran
@ 2017-11-28 7:00 ` Yao, Jiewen
2017-11-30 22:54 ` Supreeth Venkatesh
2 siblings, 1 reply; 10+ messages in thread
From: Yao, Jiewen @ 2017-11-28 7:00 UTC (permalink / raw)
To: Supreeth Venkatesh, edk2-devel@lists.01.org; +Cc: leif.lindholm@linaro.org
HI
I am sorry that I missed this mail before.
I found only 0/15 and 13/15 are in my mail box. :-(
I do not know why others are filtered.
Is that possible to post the whole patch to your private git?
As such, we can review it in more efficient way.
Basically, I think it is a good idea to have StandaloneMmPkg to hold all these features.
Thank you
Yao Jiewen
> -----Original Message-----
> From: Supreeth Venkatesh [mailto:supreeth.venkatesh@arm.com]
> Sent: Saturday, November 18, 2017 7:08 AM
> To: edk2-devel@lists.01.org
> Cc: leif.lindholm@linaro.org; Yao, Jiewen <jiewen.yao@intel.com>; Supreeth
> Venkatesh <supreeth.venkatesh@arm.com>
> Subject: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
>
> ***
> PI Specification v1.5 "Volume 4: Management Mode Core Interface"
> introduces the concept of MM Standalone Mode. Initialization of this mode
> can be done during the SEC phase (Section 1.5.2).
> On ARMv8-A systems, ARM Trusted Firmware is responsible for launching
> the normal world firmware e.g. UEFI.
>
> The Standalone MM environment is instantiated in Secure EL0 as a separate
> firmware volume. It executes as BL32 Image under control of ARM TF
> which is instantiated in EL3. Both components execute in the AArch64 execution
> state.
> This patchset will build upon the StandaloneSmmPkg module originally
> contributed by Intel.
>
> This package can be used in conjunction with ARM Trusted Firmware
> to recreate a simple MM secure environment that demonstrates communication
> between two UEFI images where one is executing in the normal world and the
> other is
> executing in the secure world.
>
> The normal world image includes:
> MM Communication DXE runtime driver that implements the protocol for
> communication
> with the MM environment in the secure world.
>
> The secure world image includes:
> The MM Standalone framework.
>
> This RFC patchset includes the proposed organization/structure and
> has architecture agnostic core changes only as a first pass.
> Once the organization/structure have been agreed upon, patchset for
> supporting libraries and AARCH64 implementation will be sent.
>
> Steps to build MM Standalone images
> In user preferred "work" directory, execute the following shell commands
>
> git clone https://github.com/tianocore/edk2.git
> git checkout master
>
> git clone https://github.com/tianocore/edk2-platforms.git
> git checkout master
>
> mkdir arm-tf
> cd arm-tf
> git clone https://github.com/ARM-software/arm-trusted-firmware.git .
> git checkout master
> cd ..
>
> git clone https://git.linaro.org/uefi/uefi-tools.git .
> git checkout master
>
> The following will build the MM Standalone image which runs in secure world.
> ./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
>
> The follwing will build the normal world UEFI image, ARM Trusted Firmware and
> a Firmware Image Package (FIP) that includes both the UEFI images.
> ./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
>
> Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware image
> package (fip) binary will be generated at:
>
> Build Output
> Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
> Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
>
> Steps to run MM Standalone image
> 1. Download the ARMv8 Architecture FVP from
>
> https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
> For more information, please refer
>
> https://developer.arm.com/products/system-design/fixed-virtual-platforms
> 2. Install FVP into preferred "work" directory.
> 3. Create a shell script "run_mm.sh" in the same folder where
> "FVP_Base_AEMv8A-AEMv8A" is present.
> Sample Shell script below:
> ./FVP_Base_AEMv8A-AEMv8A
> -C cache_state_modelled=0
> -C bp.secure_memory=1
> -C bp.tzc_400.diagnostics=1
> -C bp.pl011_uart0.untimed_fifos=0
> -C cluster1.NUM_CORES=4
> -C cluster0.NUM_CORES=4
> -C bp.pl011_uart0.out_file=uart0.output
> -C bp.pl011_uart1.out_file=uart1.output
> -C bp.pl011_uart2.out_file=uart2.output
> -C bp.pl011_uart3.out_file=uart3.output
> -C bp.secureflashloader.fname=""
> -C bp.flashloader0.fname=""
> -S -R
> 4. ./run_mm.sh
> 5. Output can be seen on FVP console.
> 6. The normal world will boot to the UEFI shell.
>
> Sample Output
>
> MM Standalone Output (FVP UART2)
> SPM Version: Major=0x0, Minor=0x1
> NumSpMemRegions - 0x6
> SpMemBase - 0xFF200000
> SpMemLimit - 0x100000000
> SpImageBase - 0xFF200000
> SpStackBase - 0xFF610000
> SpHeapBase - 0xFF620000
> SpNsCommBufBase - 0xFF600000
> SpSharedBufBase - 0xFF500000
> SpImageSize - 0x300000
> SpPcpuStackSize - 0x2000
> SpHeapSize - 0x9E0000
> SpNsCommBufSize - 0x10000
> SpPcpuSharedBufSize - 0x20000
> NumCpus - 0x8
> CpuInfo - 0xFF500680
> Mpidr - 0x80000000
> LinearId - 0x0
> Flags - 0x1
> Mpidr - 0x80000001
> LinearId - 0x1
> Flags - 0x0
> Mpidr - 0x80000002
> LinearId - 0x2
> Flags - 0x0
> Mpidr - 0x80000003
> LinearId - 0x3
> Flags - 0x0
> Mpidr - 0x80000100
> LinearId - 0x4
> Flags - 0x0
> Mpidr - 0x80000101
> LinearId - 0x5
> Flags - 0x0
> Mpidr - 0x80000102
> LinearId - 0x6
> Flags - 0x0
> Mpidr - 0x80000103
> LinearId - 0x7
> Flags - 0x0
> Found Standalone MM PE data - 0xFF201000
> Found Standalone MM PE data - 0xFF201000
> Standalone MM Core PE-COFF SectionHeaderOffset - 0xF60, NumberOfSections
> - 3
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has
> 0x60000020 permissions
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000
> has .et name
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has
> 0xFF202000 address
> UpdateMmFoundationPeCoffPermissions: Section 0 of image at 0xFF201000 has
> 0x1000 data
> UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image at
> 0xFF201000 with 0x60000020 permissions
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has
> 0xC0000040 permissions
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000
> has .aa name
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has
> 0xFF217000 address
> UpdateMmFoundationPeCoffPermissions: Section 1 of image at 0xFF201000 has
> 0x16000 data
> UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at
> 0xFF201000 with RW-XN permissions
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has
> 0x42000040 permissions
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000
> has .eo name
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has
> 0xFF218000 address
> UpdateMmFoundationPeCoffPermissions: Section 2 of image at 0xFF201000 has
> 0x17000 data
> UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at
> 0xFF201000 with RO-XN permissions
> StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
> MmramRangeCount - 0x6
> MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
> MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
> MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
> MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
> MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
> MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
> MmInitializeMemoryServices
> MmAddMemoryRegion 0 : 0x00000000FF200000 - 0x0000000000300000
> MmAddMemoryRegion 1 : 0x00000000FF500000 - 0x0000000000100000
> MmAddMemoryRegion 2 : 0x00000000FF600000 - 0x0000000000010000
> MmAddMemoryRegion 3 : 0x00000000FF610000 - 0x0000000000010000
> MmAddMemoryRegion 4 : 0x00000000FF620000 - 0x00000000000002C8
> MmAddMemoryRegion 5 : 0x00000000FF6202C8 - 0x00000000009DFD38
> mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF
> MmMain - 0xFF620000
> MmramRangeCount - 0x6
> MmramRanges[0]: 0x00000000FF200000 - 0x300000
> MmramRanges[1]: 0x00000000FF500000 - 0x100000
> MmramRanges[2]: 0x00000000FF600000 - 0x10000
> MmramRanges[3]: 0x00000000FF610000 - 0x10000
> MmramRanges[4]: 0x00000000FF620000 - 0x2C8
> MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38
> mMmramRangeCount - 0x6
> mMmramRanges - 0xFFFFEE10
> BFV address - 0xFF200000
> BFV size - 0x300000
> MmInstallConfigurationTable For HobList
> HobSize - 0x2C8
> MmHobStart - 0xFFFFE810
> MmRegisterProtocolNotify - MmConfigurationMmProtocol
> Mm Dispatch StandaloneBfvAddress - 0xFF200000
> MmCoreFfsFindMmDriver - 0xFF200000
> FvIsBeingProcesssed - 0xFF200000
> Check MmFileTypes - 0xA
> Check MmFileTypes - 0xE
> Find PE data - 0xFF219024
> MmAddToDriverList - 58F7A62B-6280-42A7-BC38-10535A64A92C
> (0xFF219024)
> MmDispatcher
> Drain the Scheduled Queue
> Search DriverList for items to place on Scheduled Queue
> DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
> TRUE
> END
> RESULT = TRUE
> Drain the Scheduled Queue
> DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
> UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with
> RO-XN permissions and size 0x7000
> UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000 with RO-X
> permissions and size 0x7000
> UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000 with
> RW-XN permissions and size 0x1000
> UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000 with
> RO-XN permissions and size 0x1000
> add-symbol-file
> /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5
> /AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpu
> Driver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000
> Loading MM driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000
> PiMmStandloneArmTfCpuDriver.efi
> StartImage - 0xFFFE7000 (Standalone Mode)
> MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7
> FFFEE008
> MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) -
> FFFEE008
> MM Core registered MM Entry Point address FF2041C0
> MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569
> FFFEE018
> Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
> mNsCommBuffer.PhysicalStart - 0xFF600000
> mNsCommBuffer.PhysicalSize - 0x10000
> mNsCommBuffer: 0x00000000FF600000 - 0x10000
> mMpInformationHobData: 0x0000000000000008 - 0x8
> mMpInformationHobData[0x80000000]: 0, 0, 0
> mMpInformationHobData[0x80000001]: 0, 1, 1
> mMpInformationHobData[0x80000002]: 0, 2, 2
> mMpInformationHobData[0x80000003]: 0, 3, 3
> mMpInformationHobData[0x80000100]: 1, 0, 0
> mMpInformationHobData[0x80000101]: 1, 1, 1
> mMpInformationHobData[0x80000102]: 1, 2, 2
> mMpInformationHobData[0x80000103]: 1, 3, 3
> MmiHandlerRegister - GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF -
> Status 0
> MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 -
> Status 0
> MmiHandlerRegister - GUID 60FF8964-E906-41D0-AFED-F241E974E08E - Status
> 0
> MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 -
> Status 0
> MmiHandlerRegister - GUID 2A571201-4966-47F6-8B86-F31E41F32F10 - Status
> 0
> MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF -
> Status 0
> MmiHandlerRegister - GUID 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B -
> Status 0
> MmMain Done!
> Shared Cpu Driver EP 0xFFFE798C
>
> ARM TF (FVP UART0)
> NOTICE: Booting Trusted Firmware
> NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL1: Built : 16:14:26, Nov 1 2017
> INFO: BL1: RAM 0x4036000 - 0x403c000
> INFO: BL1: Loading BL2
> INFO: Loading image id=1 at address 0x4027000
> INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
> NOTICE: BL1: Booting BL2
> INFO: Entry point address = 0x4027000
> INFO: SPSR = 0x3c5
> NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL2: Built : 16:14:26, Nov 1 2017
> INFO: BL2: Doing platform setup
> INFO: Configuring TrustZone Controller
> INFO: BL2: Loading image id 3
> INFO: Loading image id=3 at address 0xff000000
> INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
> INFO: BL2: Loading image id 4
> INFO: Loading image id=4 at address 0xff200000
> INFO: Image id=4 loaded: 0xff200000 - 0xff480000
> INFO: BL2: Loading image id 5
> INFO: Loading image id=5 at address 0x88000000
> INFO: Image id=5 loaded: 0x88000000 - 0x88280000
> NOTICE: BL1: Booting BL31
> INFO: Entry point address = 0xff000000
> INFO: SPSR = 0x3cd
> NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
> NOTICE: BL31: Built : 16:14:26, Nov 1 2017
> INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in
> EL3
> INFO: BL31: Initializing runtime services
> INFO: BL31: Initializing BL32
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff217000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff217000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x5
> NOTICE: (Equivalent TF attributes: 0x2a)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xff218000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffe7000
> NOTICE: Number of pages: 7 (28672 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffe7000
> NOTICE: Number of pages: 7 (28672 bytes)
> NOTICE: Attributes : 0x3
> NOTICE: (Equivalent TF attributes: 0x2)
> NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> NOTICE: Start address : 0xfffef000
> NOTICE: Number of pages: 1 (4096 bytes)
> NOTICE: Attributes : 0x7
> NOTICE: (Equivalent TF attributes: 0x22)
> INFO: BL31: Preparing for EL3 exit to normal world
> INFO: Entry point address = 0x88000000
> INFO: SPSR = 0x3c9
> UEFI firmware (version built at 16:14:14 on Nov 1 2017)
>
> ***
>
> Supreeth Venkatesh (15):
> ArmPkg/Include: Add MM interface SVC return codes.
> BaseTools/AutoGen: Update header file for MM modules.
> ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-EL0.
> MdePkg/Include: Add management mode FV file type and depex.
> StandaloneMmPkg/StandaloneMmCoreEntryPoint: Add an AArch64 specific
> entry point library.
> StandaloneMmPkg/HobLib: Add a common HOB Library for management
> mode.
> StandaloneMmPkg/FvLib: Add a common FV Library for management mode.
> StandaloneMmPkg/MemLib: Instance of management mode memory check
> library.
> StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library.
> StandaloneMmPkg/StandaloneMmDriverEntryPoint: MM driver entry point
> library.
> StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Standard
> Platforms.
> StandaloneMmPkg/Core: Implementation of Standalone MM Core Module.
> StandaloneMmPkg: Describe the package declaration, definition and fdf
> files.
> ArmPkg/DebugPeCoffExtraActionLib: Add UpdatePeCoffPermissions for
> S-ELO MM.
>
> ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146 +++
> ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
> .../DebugPeCoffExtraActionLib.c | 167 ++-
> .../DebugPeCoffExtraActionLib.inf | 7 +
> BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
> MdePkg/Include/Pi/PiFirmwareFile.h | 4 +
> StandaloneMmPkg/Core/Dependency.c | 389 +++++++
> StandaloneMmPkg/Core/Dispatcher.c | 1071
> ++++++++++++++++++++
> StandaloneMmPkg/Core/FwVol.c | 104 ++
> StandaloneMmPkg/Core/Handle.c | 533
> ++++++++++
> StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
> StandaloneMmPkg/Core/Locate.c | 496 +++++++++
> StandaloneMmPkg/Core/Mmi.c | 337 ++++++
> StandaloneMmPkg/Core/Notify.c | 203 ++++
> StandaloneMmPkg/Core/Page.c | 384 +++++++
> StandaloneMmPkg/Core/Pool.c | 287 ++++++
> StandaloneMmPkg/Core/StandaloneMmCore.c | 708
> +++++++++++++
> StandaloneMmPkg/Core/StandaloneMmCore.h | 903
> +++++++++++++++++
> StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
> StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
> StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
> StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231 +++++
> StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 225 ++++
> .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
> .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
> StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
> StandaloneMmPkg/Include/Guid/MmCoreData.h | 132 +++
> StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
> StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
> StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
> .../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
> StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
> StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
> .../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
> .../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
> StandaloneMmPkg/Include/StandaloneMm.h | 36 +
> StandaloneMmPkg/Library/FvLib/FvLib.c | 366 +++++++
> StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
> StandaloneMmPkg/Library/HobLib/HobLib.c | 697
> +++++++++++++
> StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
> StandaloneMmPkg/Library/MemLib/MemLib.c | 276 +++++
> StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
> .../MemoryAllocationLib/MemoryAllocationLib.c | 901
> ++++++++++++++++
> .../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
> .../MemoryAllocationLib/MemoryAllocationServices.h | 117 +++
> .../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
> .../Arm/SetPermissions.c | 278 +++++
> .../Arm/StandaloneMmCoreEntryPoint.c | 265 +++++
> .../StandaloneMmCoreEntryPoint.inf | 53 +
> .../StandaloneMmDriverEntryPoint.c | 102 ++
> .../StandaloneMmDriverEntryPoint.inf | 41 +
> StandaloneMmPkg/StandaloneMmPkg.dec | 47 +
> StandaloneMmPkg/StandaloneMmPkg.dsc | 132 +++
> StandaloneMmPkg/StandaloneMmPkg.fdf | 184 ++++
> 55 files changed, 11699 insertions(+), 11 deletions(-)
> create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
> create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
> create mode 100644 StandaloneMmPkg/Core/Dependency.c
> create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
> create mode 100644 StandaloneMmPkg/Core/FwVol.c
> create mode 100644 StandaloneMmPkg/Core/Handle.c
> create mode 100644 StandaloneMmPkg/Core/InstallConfigurationTable.c
> create mode 100644 StandaloneMmPkg/Core/Locate.c
> create mode 100644 StandaloneMmPkg/Core/Mmi.c
> create mode 100644 StandaloneMmPkg/Core/Notify.c
> create mode 100644 StandaloneMmPkg/Core/Page.c
> create mode 100644 StandaloneMmPkg/Core/Pool.c
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
> create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
> create mode 100644
> StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
> create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
> create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
> create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
> create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
> create mode 100644
> StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
> create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
> create mode 100644
> StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
> create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
> create mode 100644
> StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
> create mode 100644
> StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
> create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
> create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
> create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
> create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.c
> create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
> create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.c
> create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
> create mode 100644
> StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
> create mode 100644
> StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.inf
> create mode 100644
> StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationServices.h
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobList.c
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissions.
> c
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMm
> CoreEntryPoint.c
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCoreE
> ntryPoint.inf
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriv
> erEntryPoint.c
> create mode 100644
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDriv
> erEntryPoint.inf
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
> create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
>
> --
> 2.14.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
2017-11-28 7:00 ` Yao, Jiewen
@ 2017-11-30 22:54 ` Supreeth Venkatesh
2017-12-04 6:35 ` Yao, Jiewen
0 siblings, 1 reply; 10+ messages in thread
From: Supreeth Venkatesh @ 2017-11-30 22:54 UTC (permalink / raw)
To: Yao, Jiewen, edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, achin.gupta
On Tue, 2017-11-28 at 07:00 +0000, Yao, Jiewen wrote:
> HI
> I am sorry that I missed this mail before.
>
> I found only 0/15 and 13/15 are in my mail box. :-(
> I do not know why others are filtered.
This was deliberate as PATCH 13/15 implements MM core code.
Rest of them are/were AARCH64 Specific excluding the MM libraries.
>
> Is that possible to post the whole patch to your private git?
> As such, we can review it in more efficient way.
I have created a github repo below to review it in more efficient way.
EDK2
https://github.com/supven01/edk2.git
(Branch: AArch64StandaloneMm)
EDK2-PLATFORMS
https://github.com/supven01/edk2-platforms.git
(Branch: master)
Also, we are in the process of updating these changes into edk2 Staging
repository here:
https://github.com/tianocore/edk2-staging/tree/AArch64StandaloneMm
I will send out PATCH set once you/team completes the review and give
feedback/comments.
>
> Basically, I think it is a good idea to have StandaloneMmPkg to hold
> all these features.
Thank you for acknowledging this.
>
> Thank you
> Yao Jiewen
>
> >
> > -----Original Message-----
> > From: Supreeth Venkatesh [mailto:supreeth.venkatesh@arm.com]
> > Sent: Saturday, November 18, 2017 7:08 AM
> > To: edk2-devel@lists.01.org
> > Cc: leif.lindholm@linaro.org; Yao, Jiewen <jiewen.yao@intel.com>;
> > Supreeth
> > Venkatesh <supreeth.venkatesh@arm.com>
> > Subject: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
> >
> > ***
> > PI Specification v1.5 "Volume 4: Management Mode Core Interface"
> > introduces the concept of MM Standalone Mode. Initialization of
> > this mode
> > can be done during the SEC phase (Section 1.5.2).
> > On ARMv8-A systems, ARM Trusted Firmware is responsible for
> > launching
> > the normal world firmware e.g. UEFI.
> >
> > The Standalone MM environment is instantiated in Secure EL0 as a
> > separate
> > firmware volume. It executes as BL32 Image under control of ARM TF
> > which is instantiated in EL3. Both components execute in the
> > AArch64 execution
> > state.
> > This patchset will build upon the StandaloneSmmPkg module
> > originally
> > contributed by Intel.
> >
> > This package can be used in conjunction with ARM Trusted Firmware
> > to recreate a simple MM secure environment that demonstrates
> > communication
> > between two UEFI images where one is executing in the normal world
> > and the
> > other is
> > executing in the secure world.
> >
> > The normal world image includes:
> > MM Communication DXE runtime driver that implements the protocol
> > for
> > communication
> > with the MM environment in the secure world.
> >
> > The secure world image includes:
> > The MM Standalone framework.
> >
> > This RFC patchset includes the proposed organization/structure and
> > has architecture agnostic core changes only as a first pass.
> > Once the organization/structure have been agreed upon, patchset for
> > supporting libraries and AARCH64 implementation will be sent.
> >
> > Steps to build MM Standalone images
> > In user preferred "work" directory, execute the following shell
> > commands
> >
> > git clone https://github.com/tianocore/edk2.git
> > git checkout master
> >
> > git clone https://github.com/tianocore/edk2-platforms.git
> > git checkout master
> >
> > mkdir arm-tf
> > cd arm-tf
> > git clone https://github.com/ARM-software/arm-trusted-firmware.git
> > .
> > git checkout master
> > cd ..
> >
> > git clone https://git.linaro.org/uefi/uefi-tools.git .
> > git checkout master
> >
> > The following will build the MM Standalone image which runs in
> > secure world.
> > ./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
> >
> > The follwing will build the normal world UEFI image, ARM Trusted
> > Firmware and
> > a Firmware Image Package (FIP) that includes both the UEFI images.
> > ./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
> >
> > Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware
> > image
> > package (fip) binary will be generated at:
> >
> > Build Output
> > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
> > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
> >
> > Steps to run MM Standalone image
> > 1. Download the ARMv8 Architecture FVP from
> >
> > https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
> > For more information, please refer
> >
> > https://developer.arm.com/products/system-design/fixed-virtual-plat
> > forms
> > 2. Install FVP into preferred "work" directory.
> > 3. Create a shell script "run_mm.sh" in the same folder where
> > "FVP_Base_AEMv8A-AEMv8A" is present.
> > Sample Shell script below:
> > ./FVP_Base_AEMv8A-AEMv8A
> > -C cache_state_modelled=0
> > -C bp.secure_memory=1
> > -C bp.tzc_400.diagnostics=1
> > -C bp.pl011_uart0.untimed_fifos=0
> > -C cluster1.NUM_CORES=4
> > -C cluster0.NUM_CORES=4
> > -C bp.pl011_uart0.out_file=uart0.output
> > -C bp.pl011_uart1.out_file=uart1.output
> > -C bp.pl011_uart2.out_file=uart2.output
> > -C bp.pl011_uart3.out_file=uart3.output
> > -C bp.secureflashloader.fname=""
> > -C bp.flashloader0.fname=""
> > -S -R
> > 4. ./run_mm.sh
> > 5. Output can be seen on FVP console.
> > 6. The normal world will boot to the UEFI shell.
> >
> > Sample Output
> >
> > MM Standalone Output (FVP UART2)
> > SPM Version: Major=0x0, Minor=0x1
> > NumSpMemRegions - 0x6
> > SpMemBase - 0xFF200000
> > SpMemLimit - 0x100000000
> > SpImageBase - 0xFF200000
> > SpStackBase - 0xFF610000
> > SpHeapBase - 0xFF620000
> > SpNsCommBufBase - 0xFF600000
> > SpSharedBufBase - 0xFF500000
> > SpImageSize - 0x300000
> > SpPcpuStackSize - 0x2000
> > SpHeapSize - 0x9E0000
> > SpNsCommBufSize - 0x10000
> > SpPcpuSharedBufSize - 0x20000
> > NumCpus - 0x8
> > CpuInfo - 0xFF500680
> > Mpidr - 0x80000000
> > LinearId - 0x0
> > Flags - 0x1
> > Mpidr - 0x80000001
> > LinearId - 0x1
> > Flags - 0x0
> > Mpidr - 0x80000002
> > LinearId - 0x2
> > Flags - 0x0
> > Mpidr - 0x80000003
> > LinearId - 0x3
> > Flags - 0x0
> > Mpidr - 0x80000100
> > LinearId - 0x4
> > Flags - 0x0
> > Mpidr - 0x80000101
> > LinearId - 0x5
> > Flags - 0x0
> > Mpidr - 0x80000102
> > LinearId - 0x6
> > Flags - 0x0
> > Mpidr - 0x80000103
> > LinearId - 0x7
> > Flags - 0x0
> > Found Standalone MM PE data - 0xFF201000
> > Found Standalone MM PE data - 0xFF201000
> > Standalone MM Core PE-COFF SectionHeaderOffset - 0xF60,
> > NumberOfSections
> > - 3
> > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > 0xFF201000 has
> > 0x60000020 permissions
> > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > 0xFF201000
> > has .et name
> > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > 0xFF201000 has
> > 0xFF202000 address
> > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > 0xFF201000 has
> > 0x1000 data
> > UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image at
> > 0xFF201000 with 0x60000020 permissions
> > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > 0xFF201000 has
> > 0xC0000040 permissions
> > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > 0xFF201000
> > has .aa name
> > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > 0xFF201000 has
> > 0xFF217000 address
> > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > 0xFF201000 has
> > 0x16000 data
> > UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at
> > 0xFF201000 with RW-XN permissions
> > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > 0xFF201000 has
> > 0x42000040 permissions
> > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > 0xFF201000
> > has .eo name
> > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > 0xFF201000 has
> > 0xFF218000 address
> > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > 0xFF201000 has
> > 0x17000 data
> > UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at
> > 0xFF201000 with RO-XN permissions
> > StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
> > MmramRangeCount - 0x6
> > MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
> > MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
> > MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
> > MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
> > MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
> > MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
> > MmInitializeMemoryServices
> > MmAddMemoryRegion 0 : 0x00000000FF200000 - 0x0000000000300000
> > MmAddMemoryRegion 1 : 0x00000000FF500000 - 0x0000000000100000
> > MmAddMemoryRegion 2 : 0x00000000FF600000 - 0x0000000000010000
> > MmAddMemoryRegion 3 : 0x00000000FF610000 - 0x0000000000010000
> > MmAddMemoryRegion 4 : 0x00000000FF620000 - 0x00000000000002C8
> > MmAddMemoryRegion 5 : 0x00000000FF6202C8 - 0x00000000009DFD38
> > mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF
> > MmMain - 0xFF620000
> > MmramRangeCount - 0x6
> > MmramRanges[0]: 0x00000000FF200000 - 0x300000
> > MmramRanges[1]: 0x00000000FF500000 - 0x100000
> > MmramRanges[2]: 0x00000000FF600000 - 0x10000
> > MmramRanges[3]: 0x00000000FF610000 - 0x10000
> > MmramRanges[4]: 0x00000000FF620000 - 0x2C8
> > MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38
> > mMmramRangeCount - 0x6
> > mMmramRanges - 0xFFFFEE10
> > BFV address - 0xFF200000
> > BFV size - 0x300000
> > MmInstallConfigurationTable For HobList
> > HobSize - 0x2C8
> > MmHobStart - 0xFFFFE810
> > MmRegisterProtocolNotify - MmConfigurationMmProtocol
> > Mm Dispatch StandaloneBfvAddress - 0xFF200000
> > MmCoreFfsFindMmDriver - 0xFF200000
> > FvIsBeingProcesssed - 0xFF200000
> > Check MmFileTypes - 0xA
> > Check MmFileTypes - 0xE
> > Find PE data - 0xFF219024
> > MmAddToDriverList - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > (0xFF219024)
> > MmDispatcher
> > Drain the Scheduled Queue
> > Search DriverList for items to place on Scheduled Queue
> > DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
> > TRUE
> > END
> > RESULT = TRUE
> > Drain the Scheduled Queue
> > DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > with
> > RO-XN permissions and size 0x7000
> > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > with RO-X
> > permissions and size 0x7000
> > UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000
> > with
> > RW-XN permissions and size 0x1000
> > UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000
> > with
> > RO-XN permissions and size 0x1000
> > add-symbol-file
> > /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5
> > /AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpu
> > Driver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000
> > Loading MM driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000
> > PiMmStandloneArmTfCpuDriver.efi
> > StartImage - 0xFFFE7000 (Standalone Mode)
> > MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7
> > FFFEE008
> > MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) -
> > FFFEE008
> > MM Core registered MM Entry Point address FF2041C0
> > MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569
> > FFFEE018
> > Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
> > mNsCommBuffer.PhysicalStart - 0xFF600000
> > mNsCommBuffer.PhysicalSize - 0x10000
> > mNsCommBuffer: 0x00000000FF600000 - 0x10000
> > mMpInformationHobData: 0x0000000000000008 - 0x8
> > mMpInformationHobData[0x80000000]: 0, 0, 0
> > mMpInformationHobData[0x80000001]: 0, 1, 1
> > mMpInformationHobData[0x80000002]: 0, 2, 2
> > mMpInformationHobData[0x80000003]: 0, 3, 3
> > mMpInformationHobData[0x80000100]: 1, 0, 0
> > mMpInformationHobData[0x80000101]: 1, 1, 1
> > mMpInformationHobData[0x80000102]: 1, 2, 2
> > mMpInformationHobData[0x80000103]: 1, 3, 3
> > MmiHandlerRegister - GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF -
> > Status 0
> > MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 -
> > Status 0
> > MmiHandlerRegister - GUID 60FF8964-E906-41D0-AFED-F241E974E08E -
> > Status
> > 0
> > MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 -
> > Status 0
> > MmiHandlerRegister - GUID 2A571201-4966-47F6-8B86-F31E41F32F10 -
> > Status
> > 0
> > MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF -
> > Status 0
> > MmiHandlerRegister - GUID 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B -
> > Status 0
> > MmMain Done!
> > Shared Cpu Driver EP 0xFFFE798C
> >
> > ARM TF (FVP UART0)
> > NOTICE: Booting Trusted Firmware
> > NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
> > NOTICE: BL1: Built : 16:14:26, Nov 1 2017
> > INFO: BL1: RAM 0x4036000 - 0x403c000
> > INFO: BL1: Loading BL2
> > INFO: Loading image id=1 at address 0x4027000
> > INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
> > NOTICE: BL1: Booting BL2
> > INFO: Entry point address = 0x4027000
> > INFO: SPSR = 0x3c5
> > NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
> > NOTICE: BL2: Built : 16:14:26, Nov 1 2017
> > INFO: BL2: Doing platform setup
> > INFO: Configuring TrustZone Controller
> > INFO: BL2: Loading image id 3
> > INFO: Loading image id=3 at address 0xff000000
> > INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
> > INFO: BL2: Loading image id 4
> > INFO: Loading image id=4 at address 0xff200000
> > INFO: Image id=4 loaded: 0xff200000 - 0xff480000
> > INFO: BL2: Loading image id 5
> > INFO: Loading image id=5 at address 0x88000000
> > INFO: Image id=5 loaded: 0x88000000 - 0x88280000
> > NOTICE: BL1: Booting BL31
> > INFO: Entry point address = 0xff000000
> > INFO: SPSR = 0x3cd
> > NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
> > NOTICE: BL31: Built : 16:14:26, Nov 1 2017
> > INFO: GICv3 with legacy support detected. ARM GICV3 driver
> > initialized in
> > EL3
> > INFO: BL31: Initializing runtime services
> > INFO: BL31: Initializing BL32
> > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > NOTICE: Start address : 0xff217000
> > NOTICE: Number of pages: 1 (4096 bytes)
> > NOTICE: Attributes : 0x7
> > NOTICE: (Equivalent TF attributes: 0x22)
> > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > NOTICE: Start address : 0xff217000
> > NOTICE: Number of pages: 1 (4096 bytes)
> > NOTICE: Attributes : 0x5
> > NOTICE: (Equivalent TF attributes: 0x2a)
> > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > NOTICE: Start address : 0xff218000
> > NOTICE: Number of pages: 1 (4096 bytes)
> > NOTICE: Attributes : 0x7
> > NOTICE: (Equivalent TF attributes: 0x22)
> > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > NOTICE: Start address : 0xfffe7000
> > NOTICE: Number of pages: 7 (28672 bytes)
> > NOTICE: Attributes : 0x7
> > NOTICE: (Equivalent TF attributes: 0x22)
> > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > NOTICE: Start address : 0xfffe7000
> > NOTICE: Number of pages: 7 (28672 bytes)
> > NOTICE: Attributes : 0x3
> > NOTICE: (Equivalent TF attributes: 0x2)
> > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > NOTICE: Start address : 0xfffef000
> > NOTICE: Number of pages: 1 (4096 bytes)
> > NOTICE: Attributes : 0x7
> > NOTICE: (Equivalent TF attributes: 0x22)
> > INFO: BL31: Preparing for EL3 exit to normal world
> > INFO: Entry point address = 0x88000000
> > INFO: SPSR = 0x3c9
> > UEFI firmware (version built at 16:14:14 on Nov 1 2017)
> >
> > ***
> >
> > Supreeth Venkatesh (15):
> > ArmPkg/Include: Add MM interface SVC return codes.
> > BaseTools/AutoGen: Update header file for MM modules.
> > ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> > ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-
> > EL0.
> > MdePkg/Include: Add management mode FV file type and depex.
> > StandaloneMmPkg/StandaloneMmCoreEntryPoint: Add an AArch64
> > specific
> > entry point library.
> > StandaloneMmPkg/HobLib: Add a common HOB Library for management
> > mode.
> > StandaloneMmPkg/FvLib: Add a common FV Library for management
> > mode.
> > StandaloneMmPkg/MemLib: Instance of management mode memory check
> > library.
> > StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation
> > library.
> > StandaloneMmPkg/StandaloneMmDriverEntryPoint: MM driver entry
> > point
> > library.
> > StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Standard
> > Platforms.
> > StandaloneMmPkg/Core: Implementation of Standalone MM Core
> > Module.
> > StandaloneMmPkg: Describe the package declaration, definition and
> > fdf
> > files.
> > ArmPkg/DebugPeCoffExtraActionLib: Add UpdatePeCoffPermissions for
> > S-ELO MM.
> >
> > ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> > ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146 +++
> > ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
> > .../DebugPeCoffExtraActionLib.c | 167 ++-
> > .../DebugPeCoffExtraActionLib.inf | 7 +
> > BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
> > MdePkg/Include/Pi/PiFirmwareFile.h | 4 +
> > StandaloneMmPkg/Core/Dependency.c | 389 +++++++
> > StandaloneMmPkg/Core/Dispatcher.c | 1071
> > ++++++++++++++++++++
> > StandaloneMmPkg/Core/FwVol.c | 104 ++
> > StandaloneMmPkg/Core/Handle.c | 533
> > ++++++++++
> > StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
> > StandaloneMmPkg/Core/Locate.c | 496
> > +++++++++
> > StandaloneMmPkg/Core/Mmi.c | 337 ++++++
> > StandaloneMmPkg/Core/Notify.c | 203 ++++
> > StandaloneMmPkg/Core/Page.c | 384 +++++++
> > StandaloneMmPkg/Core/Pool.c | 287 ++++++
> > StandaloneMmPkg/Core/StandaloneMmCore.c | 708
> > +++++++++++++
> > StandaloneMmPkg/Core/StandaloneMmCore.h | 903
> > +++++++++++++++++
> > StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
> > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
> > StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
> > StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231 +++++
> > StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 225 ++++
> > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
> > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
> > StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
> > StandaloneMmPkg/Include/Guid/MmCoreData.h | 132 +++
> > StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
> > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
> > StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
> > .../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
> > StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
> > StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
> > .../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
> > .../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
> > StandaloneMmPkg/Include/StandaloneMm.h | 36 +
> > StandaloneMmPkg/Library/FvLib/FvLib.c | 366 +++++++
> > StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
> > StandaloneMmPkg/Library/HobLib/HobLib.c | 697
> > +++++++++++++
> > StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
> > StandaloneMmPkg/Library/MemLib/MemLib.c | 276 +++++
> > StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
> > .../MemoryAllocationLib/MemoryAllocationLib.c | 901
> > ++++++++++++++++
> > .../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
> > .../MemoryAllocationLib/MemoryAllocationServices.h | 117 +++
> > .../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
> > .../Arm/SetPermissions.c | 278 +++++
> > .../Arm/StandaloneMmCoreEntryPoint.c | 265 +++++
> > .../StandaloneMmCoreEntryPoint.inf | 53 +
> > .../StandaloneMmDriverEntryPoint.c | 102 ++
> > .../StandaloneMmDriverEntryPoint.inf | 41 +
> > StandaloneMmPkg/StandaloneMmPkg.dec | 47 +
> > StandaloneMmPkg/StandaloneMmPkg.dsc | 132 +++
> > StandaloneMmPkg/StandaloneMmPkg.fdf | 184 ++++
> > 55 files changed, 11699 insertions(+), 11 deletions(-)
> > create mode 100644 ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
> > create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
> > create mode 100644 StandaloneMmPkg/Core/Dependency.c
> > create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
> > create mode 100644 StandaloneMmPkg/Core/FwVol.c
> > create mode 100644 StandaloneMmPkg/Core/Handle.c
> > create mode 100644
> > StandaloneMmPkg/Core/InstallConfigurationTable.c
> > create mode 100644 StandaloneMmPkg/Core/Locate.c
> > create mode 100644 StandaloneMmPkg/Core/Mmi.c
> > create mode 100644 StandaloneMmPkg/Core/Notify.c
> > create mode 100644 StandaloneMmPkg/Core/Page.c
> > create mode 100644 StandaloneMmPkg/Core/Pool.c
> > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
> > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
> > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
> > create mode 100644
> > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
> > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
> > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
> > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
> > create mode 100644
> > StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
> > create mode 100644
> > StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
> > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
> > create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
> > create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
> > create mode 100644
> > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
> > create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
> > create mode 100644
> > StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
> > create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
> > create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
> > create mode 100644
> > StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
> > create mode 100644
> > StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
> > create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
> > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
> > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
> > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.c
> > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
> > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.c
> > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
> > create mode 100644
> > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
> > create mode 100644
> > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.inf
> > create mode 100644
> > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationService
> > s.h
> > create mode 100644
> > StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobLis
> > t.c
> > create mode 100644
> > StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissio
> > ns.
> > c
> > create mode 100644
> > StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMm
> > CoreEntryPoint.c
> > create mode 100644
> > StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCore
> > E
> > ntryPoint.inf
> > create mode 100644
> > StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > iv
> > erEntryPoint.c
> > create mode 100644
> > StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > iv
> > erEntryPoint.inf
> > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
> > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
> > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
> >
> > --
> > 2.14.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
2017-11-30 22:54 ` Supreeth Venkatesh
@ 2017-12-04 6:35 ` Yao, Jiewen
2017-12-04 15:56 ` Supreeth Venkatesh
2018-04-06 14:55 ` Supreeth Venkatesh
0 siblings, 2 replies; 10+ messages in thread
From: Yao, Jiewen @ 2017-12-04 6:35 UTC (permalink / raw)
To: Supreeth Venkatesh, edk2-devel@lists.01.org; +Cc: leif.lindholm@linaro.org
Thanks you very much.
Thanks for your patient. I have reviewed https://github.com/supven01/edk2.git (Branch: AArch64StandaloneMm)
Below is my thougth:
1) I do not have comment for ArmPkg related change. - I expect Arm expert can review that.
2) For "BaseTools/AutoGen: Update header file for MM modules."
I agree with you on that. (Reviewed-by: Jiewen.yao@intel.com)
Would you please send separate patch for BaseTools owner to review?
3) For "MdePkg/Include: Add management mode FV file type and depex."
I agree with you on that. (Reviewed-by: Jiewen.yao@intel.com)
Would you please send separate patch for MdePkg owner to review?
4) For "MdeModulePkg: Add application to test MM communication protocol."
Can we put UefiInfoApp to StandaloneMmPkg?
The gMmUefiInfoGuid is consumed by StandaloneMmPkg\Core\StandaloneMmCore.c, so I believe it more tights to StandaloneMmPkg.
I do not want to bother MdeModulePkg on that.
5) The rest are all StandaloneMmPkg.
5.1) For "StandaloneMmPkg: Add an AArch64 specific entry point library."
This seems not a generic lib.
Can we rename it to be: StandaloneMmCoreEntryPointArm?
If so, we do not need create Arm sub-folder there.
5.2) For "StandaloneMmPkg/HobLib: Add a common HOB Library for management mode."
This seems not a generic way to get the Hob.
Below API seems private one. It is not defined in HobLib. But a contract between StandaloneMmPkg\Library\StandaloneMmCoreEntryPoint\Arm\CreateHobList.c and StandaloneMmPkg\Library\HobLib\HobLib.c
EFI_HOB_HANDOFF_INFO_TABLE*
HobConstructor (
IN VOID *EfiMemoryBegin,
IN UINTN EfiMemoryLength,
IN VOID *EfiFreeMemoryBottom,
IN VOID *EfiFreeMemoryTop
)
This is typically not encourage. I am not sure if we have better way to resolve the issue.
But if there is not, I prefer we move it to be ArmSpecific HobLib, such as HobLibArmStandaloneMm.
5.3) For "StandaloneMmPkg/FvLib: Add a common FV Library for management mode."
Looks good.
5.4) For "StandaloneMmPkg/MemLib: Instance of memory check library."
It seems a compatibility issue, that we rename SmmMemLib to MmMemLib.
Maybe, we can add MmMemLib.h API, and move SmmMemLib content to MmMemLib, then let SmmMemLib call MmMemLib.
5.5) For "StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library."
May I know why you change " gSmst->SmmAllocatePool ();" to "MmAllocatePool ();"
An MM driver should not know the detail implementation of MmCore.
Can we just use gMmst->MmAllocatePool() here?
5.6) For "StandaloneMmPkg: MM driver entry point library."
Looks good.
5.7) For "StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Platforms."
It seems Arm specific. Can we rename to ArmCpuMm?
5.8) For "StandaloneMmPkg/Core: Implementation of Standalone MM Core Module."
I have not gone through all detail.
It seems quite similar to my previous one. So it is good.
5.9) For "StandaloneMmPkg: Add handler to handle event received from "uefiinfo"."
Looks good.
Thank you
Yao Jiewen
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Supreeth Venkatesh
> Sent: Friday, December 1, 2017 6:55 AM
> To: Yao, Jiewen <jiewen.yao@intel.com>; edk2-devel@lists.01.org
> Cc: leif.lindholm@linaro.org
> Subject: Re: [edk2] [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
>
> On Tue, 2017-11-28 at 07:00 +0000, Yao, Jiewen wrote:
> > HI
> > I am sorry that I missed this mail before.
> >
> > I found only 0/15 and 13/15 are in my mail box. :-(
> > I do not know why others are filtered.
> This was deliberate as PATCH 13/15 implements MM core code.
> Rest of them are/were AARCH64 Specific excluding the MM libraries.
> >
> > Is that possible to post the whole patch to your private git?
> > As such, we can review it in more efficient way.
> I have created a github repo below to review it in more efficient way.
>
> EDK2
> https://github.com/supven01/edk2.git
> (Branch: AArch64StandaloneMm)
>
> EDK2-PLATFORMS
> https://github.com/supven01/edk2-platforms.git
> (Branch: master)
>
> Also, we are in the process of updating these changes into edk2 Staging
> repository here:
> https://github.com/tianocore/edk2-staging/tree/AArch64StandaloneMm
>
> I will send out PATCH set once you/team completes the review and give
> feedback/comments.
>
> >
> > Basically, I think it is a good idea to have StandaloneMmPkg to hold
> > all these features.
> Thank you for acknowledging this.
>
> >
> > Thank you
> > Yao Jiewen
> >
> > >
> > > -----Original Message-----
> > > From: Supreeth Venkatesh [mailto:supreeth.venkatesh@arm.com]
> > > Sent: Saturday, November 18, 2017 7:08 AM
> > > To: edk2-devel@lists.01.org
> > > Cc: leif.lindholm@linaro.org; Yao, Jiewen <jiewen.yao@intel.com>;
> > > Supreeth
> > > Venkatesh <supreeth.venkatesh@arm.com>
> > > Subject: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
> > >
> > > ***
> > > PI Specification v1.5 "Volume 4: Management Mode Core Interface"
> > > introduces the concept of MM Standalone Mode. Initialization of
> > > this mode
> > > can be done during the SEC phase (Section 1.5.2).
> > > On ARMv8-A systems, ARM Trusted Firmware is responsible for
> > > launching
> > > the normal world firmware e.g. UEFI.
> > >
> > > The Standalone MM environment is instantiated in Secure EL0 as a
> > > separate
> > > firmware volume. It executes as BL32 Image under control of ARM TF
> > > which is instantiated in EL3. Both components execute in the
> > > AArch64 execution
> > > state.
> > > This patchset will build upon the StandaloneSmmPkg module
> > > originally
> > > contributed by Intel.
> > >
> > > This package can be used in conjunction with ARM Trusted Firmware
> > > to recreate a simple MM secure environment that demonstrates
> > > communication
> > > between two UEFI images where one is executing in the normal world
> > > and the
> > > other is
> > > executing in the secure world.
> > >
> > > The normal world image includes:
> > > MM Communication DXE runtime driver that implements the protocol
> > > for
> > > communication
> > > with the MM environment in the secure world.
> > >
> > > The secure world image includes:
> > > The MM Standalone framework.
> > >
> > > This RFC patchset includes the proposed organization/structure and
> > > has architecture agnostic core changes only as a first pass.
> > > Once the organization/structure have been agreed upon, patchset for
> > > supporting libraries and AARCH64 implementation will be sent.
> > >
> > > Steps to build MM Standalone images
> > > In user preferred "work" directory, execute the following shell
> > > commands
> > >
> > > git clone https://github.com/tianocore/edk2.git
> > > git checkout master
> > >
> > > git clone https://github.com/tianocore/edk2-platforms.git
> > > git checkout master
> > >
> > > mkdir arm-tf
> > > cd arm-tf
> > > git clone https://github.com/ARM-software/arm-trusted-firmware.git
> > > .
> > > git checkout master
> > > cd ..
> > >
> > > git clone https://git.linaro.org/uefi/uefi-tools.git .
> > > git checkout master
> > >
> > > The following will build the MM Standalone image which runs in
> > > secure world.
> > > ./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
> > >
> > > The follwing will build the normal world UEFI image, ARM Trusted
> > > Firmware and
> > > a Firmware Image Package (FIP) that includes both the UEFI images.
> > > ./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
> > >
> > > Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware
> > > image
> > > package (fip) binary will be generated at:
> > >
> > > Build Output
> > > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
> > > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
> > >
> > > Steps to run MM Standalone image
> > > 1. Download the ARMv8 Architecture FVP from
> > >
> > > https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
> > > For more information, please refer
> > >
> > > https://developer.arm.com/products/system-design/fixed-virtual-plat
> > > forms
> > > 2. Install FVP into preferred "work" directory.
> > > 3. Create a shell script "run_mm.sh" in the same folder where
> > > "FVP_Base_AEMv8A-AEMv8A" is present.
> > > Sample Shell script below:
> > > ./FVP_Base_AEMv8A-AEMv8A
> > > -C cache_state_modelled=0
> > > -C bp.secure_memory=1
> > > -C bp.tzc_400.diagnostics=1
> > > -C bp.pl011_uart0.untimed_fifos=0
> > > -C cluster1.NUM_CORES=4
> > > -C cluster0.NUM_CORES=4
> > > -C bp.pl011_uart0.out_file=uart0.output
> > > -C bp.pl011_uart1.out_file=uart1.output
> > > -C bp.pl011_uart2.out_file=uart2.output
> > > -C bp.pl011_uart3.out_file=uart3.output
> > > -C bp.secureflashloader.fname=""
> > > -C bp.flashloader0.fname=""
> > > -S -R
> > > 4. ./run_mm.sh
> > > 5. Output can be seen on FVP console.
> > > 6. The normal world will boot to the UEFI shell.
> > >
> > > Sample Output
> > >
> > > MM Standalone Output (FVP UART2)
> > > SPM Version: Major=0x0, Minor=0x1
> > > NumSpMemRegions - 0x6
> > > SpMemBase - 0xFF200000
> > > SpMemLimit - 0x100000000
> > > SpImageBase - 0xFF200000
> > > SpStackBase - 0xFF610000
> > > SpHeapBase - 0xFF620000
> > > SpNsCommBufBase - 0xFF600000
> > > SpSharedBufBase - 0xFF500000
> > > SpImageSize - 0x300000
> > > SpPcpuStackSize - 0x2000
> > > SpHeapSize - 0x9E0000
> > > SpNsCommBufSize - 0x10000
> > > SpPcpuSharedBufSize - 0x20000
> > > NumCpus - 0x8
> > > CpuInfo - 0xFF500680
> > > Mpidr - 0x80000000
> > > LinearId - 0x0
> > > Flags - 0x1
> > > Mpidr - 0x80000001
> > > LinearId - 0x1
> > > Flags - 0x0
> > > Mpidr - 0x80000002
> > > LinearId - 0x2
> > > Flags - 0x0
> > > Mpidr - 0x80000003
> > > LinearId - 0x3
> > > Flags - 0x0
> > > Mpidr - 0x80000100
> > > LinearId - 0x4
> > > Flags - 0x0
> > > Mpidr - 0x80000101
> > > LinearId - 0x5
> > > Flags - 0x0
> > > Mpidr - 0x80000102
> > > LinearId - 0x6
> > > Flags - 0x0
> > > Mpidr - 0x80000103
> > > LinearId - 0x7
> > > Flags - 0x0
> > > Found Standalone MM PE data - 0xFF201000
> > > Found Standalone MM PE data - 0xFF201000
> > > Standalone MM Core PE-COFF SectionHeaderOffset - 0xF60,
> > > NumberOfSections
> > > - 3
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000 has
> > > 0x60000020 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000
> > > has .et name
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000 has
> > > 0xFF202000 address
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000 has
> > > 0x1000 data
> > > UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image at
> > > 0xFF201000 with 0x60000020 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000 has
> > > 0xC0000040 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000
> > > has .aa name
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000 has
> > > 0xFF217000 address
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000 has
> > > 0x16000 data
> > > UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at
> > > 0xFF201000 with RW-XN permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000 has
> > > 0x42000040 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000
> > > has .eo name
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000 has
> > > 0xFF218000 address
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000 has
> > > 0x17000 data
> > > UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at
> > > 0xFF201000 with RO-XN permissions
> > > StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
> > > MmramRangeCount - 0x6
> > > MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
> > > MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
> > > MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
> > > MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
> > > MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
> > > MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
> > > MmInitializeMemoryServices
> > > MmAddMemoryRegion 0 : 0x00000000FF200000 - 0x0000000000300000
> > > MmAddMemoryRegion 1 : 0x00000000FF500000 - 0x0000000000100000
> > > MmAddMemoryRegion 2 : 0x00000000FF600000 - 0x0000000000010000
> > > MmAddMemoryRegion 3 : 0x00000000FF610000 - 0x0000000000010000
> > > MmAddMemoryRegion 4 : 0x00000000FF620000 - 0x00000000000002C8
> > > MmAddMemoryRegion 5 : 0x00000000FF6202C8 - 0x00000000009DFD38
> > > mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF
> > > MmMain - 0xFF620000
> > > MmramRangeCount - 0x6
> > > MmramRanges[0]: 0x00000000FF200000 - 0x300000
> > > MmramRanges[1]: 0x00000000FF500000 - 0x100000
> > > MmramRanges[2]: 0x00000000FF600000 - 0x10000
> > > MmramRanges[3]: 0x00000000FF610000 - 0x10000
> > > MmramRanges[4]: 0x00000000FF620000 - 0x2C8
> > > MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38
> > > mMmramRangeCount - 0x6
> > > mMmramRanges - 0xFFFFEE10
> > > BFV address - 0xFF200000
> > > BFV size - 0x300000
> > > MmInstallConfigurationTable For HobList
> > > HobSize - 0x2C8
> > > MmHobStart - 0xFFFFE810
> > > MmRegisterProtocolNotify - MmConfigurationMmProtocol
> > > Mm Dispatch StandaloneBfvAddress - 0xFF200000
> > > MmCoreFfsFindMmDriver - 0xFF200000
> > > FvIsBeingProcesssed - 0xFF200000
> > > Check MmFileTypes - 0xA
> > > Check MmFileTypes - 0xE
> > > Find PE data - 0xFF219024
> > > MmAddToDriverList - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > (0xFF219024)
> > > MmDispatcher
> > > Drain the Scheduled Queue
> > > Search DriverList for items to place on Scheduled Queue
> > > DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
> > > TRUE
> > > END
> > > RESULT = TRUE
> > > Drain the Scheduled Queue
> > > DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > > with
> > > RO-XN permissions and size 0x7000
> > > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > > with RO-X
> > > permissions and size 0x7000
> > > UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000
> > > with
> > > RW-XN permissions and size 0x1000
> > > UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000
> > > with
> > > RO-XN permissions and size 0x1000
> > > add-symbol-file
> > >
> /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5
> > >
> /AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpu
> > > Driver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000
> > > Loading MM driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000
> > > PiMmStandloneArmTfCpuDriver.efi
> > > StartImage - 0xFFFE7000 (Standalone Mode)
> > > MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7
> > > FFFEE008
> > > MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) -
> > > FFFEE008
> > > MM Core registered MM Entry Point address FF2041C0
> > > MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569
> > > FFFEE018
> > > Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
> > > mNsCommBuffer.PhysicalStart - 0xFF600000
> > > mNsCommBuffer.PhysicalSize - 0x10000
> > > mNsCommBuffer: 0x00000000FF600000 - 0x10000
> > > mMpInformationHobData: 0x0000000000000008 - 0x8
> > > mMpInformationHobData[0x80000000]: 0, 0, 0
> > > mMpInformationHobData[0x80000001]: 0, 1, 1
> > > mMpInformationHobData[0x80000002]: 0, 2, 2
> > > mMpInformationHobData[0x80000003]: 0, 3, 3
> > > mMpInformationHobData[0x80000100]: 1, 0, 0
> > > mMpInformationHobData[0x80000101]: 1, 1, 1
> > > mMpInformationHobData[0x80000102]: 1, 2, 2
> > > mMpInformationHobData[0x80000103]: 1, 3, 3
> > > MmiHandlerRegister - GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF -
> > > Status 0
> > > MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 -
> > > Status 0
> > > MmiHandlerRegister - GUID 60FF8964-E906-41D0-AFED-F241E974E08E -
> > > Status
> > > 0
> > > MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 -
> > > Status 0
> > > MmiHandlerRegister - GUID 2A571201-4966-47F6-8B86-F31E41F32F10 -
> > > Status
> > > 0
> > > MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF -
> > > Status 0
> > > MmiHandlerRegister - GUID 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B -
> > > Status 0
> > > MmMain Done!
> > > Shared Cpu Driver EP 0xFFFE798C
> > >
> > > ARM TF (FVP UART0)
> > > NOTICE: Booting Trusted Firmware
> > > NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > NOTICE: BL1: Built : 16:14:26, Nov 1 2017
> > > INFO: BL1: RAM 0x4036000 - 0x403c000
> > > INFO: BL1: Loading BL2
> > > INFO: Loading image id=1 at address 0x4027000
> > > INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
> > > NOTICE: BL1: Booting BL2
> > > INFO: Entry point address = 0x4027000
> > > INFO: SPSR = 0x3c5
> > > NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > NOTICE: BL2: Built : 16:14:26, Nov 1 2017
> > > INFO: BL2: Doing platform setup
> > > INFO: Configuring TrustZone Controller
> > > INFO: BL2: Loading image id 3
> > > INFO: Loading image id=3 at address 0xff000000
> > > INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
> > > INFO: BL2: Loading image id 4
> > > INFO: Loading image id=4 at address 0xff200000
> > > INFO: Image id=4 loaded: 0xff200000 - 0xff480000
> > > INFO: BL2: Loading image id 5
> > > INFO: Loading image id=5 at address 0x88000000
> > > INFO: Image id=5 loaded: 0x88000000 - 0x88280000
> > > NOTICE: BL1: Booting BL31
> > > INFO: Entry point address = 0xff000000
> > > INFO: SPSR = 0x3cd
> > > NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > NOTICE: BL31: Built : 16:14:26, Nov 1 2017
> > > INFO: GICv3 with legacy support detected. ARM GICV3 driver
> > > initialized in
> > > EL3
> > > INFO: BL31: Initializing runtime services
> > > INFO: BL31: Initializing BL32
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xff217000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xff217000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x5
> > > NOTICE: (Equivalent TF attributes: 0x2a)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xff218000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xfffe7000
> > > NOTICE: Number of pages: 7 (28672 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xfffe7000
> > > NOTICE: Number of pages: 7 (28672 bytes)
> > > NOTICE: Attributes : 0x3
> > > NOTICE: (Equivalent TF attributes: 0x2)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xfffef000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > INFO: BL31: Preparing for EL3 exit to normal world
> > > INFO: Entry point address = 0x88000000
> > > INFO: SPSR = 0x3c9
> > > UEFI firmware (version built at 16:14:14 on Nov 1 2017)
> > >
> > > ***
> > >
> > > Supreeth Venkatesh (15):
> > > ArmPkg/Include: Add MM interface SVC return codes.
> > > BaseTools/AutoGen: Update header file for MM modules.
> > > ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> > > ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in S-
> > > EL0.
> > > MdePkg/Include: Add management mode FV file type and depex.
> > > StandaloneMmPkg/StandaloneMmCoreEntryPoint: Add an AArch64
> > > specific
> > > entry point library.
> > > StandaloneMmPkg/HobLib: Add a common HOB Library for management
> > > mode.
> > > StandaloneMmPkg/FvLib: Add a common FV Library for management
> > > mode.
> > > StandaloneMmPkg/MemLib: Instance of management mode memory
> check
> > > library.
> > > StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation
> > > library.
> > > StandaloneMmPkg/StandaloneMmDriverEntryPoint: MM driver entry
> > > point
> > > library.
> > > StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Standard
> > > Platforms.
> > > StandaloneMmPkg/Core: Implementation of Standalone MM Core
> > > Module.
> > > StandaloneMmPkg: Describe the package declaration, definition and
> > > fdf
> > > files.
> > > ArmPkg/DebugPeCoffExtraActionLib: Add UpdatePeCoffPermissions for
> > > S-ELO MM.
> > >
> > > ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> > > ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146
> +++
> > > ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
> > > .../DebugPeCoffExtraActionLib.c | 167 ++-
> > > .../DebugPeCoffExtraActionLib.inf | 7 +
> > > BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
> > > MdePkg/Include/Pi/PiFirmwareFile.h | 4 +
> > > StandaloneMmPkg/Core/Dependency.c | 389
> +++++++
> > > StandaloneMmPkg/Core/Dispatcher.c | 1071
> > > ++++++++++++++++++++
> > > StandaloneMmPkg/Core/FwVol.c | 104
> ++
> > > StandaloneMmPkg/Core/Handle.c | 533
> > > ++++++++++
> > > StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
> > > StandaloneMmPkg/Core/Locate.c | 496
> > > +++++++++
> > > StandaloneMmPkg/Core/Mmi.c | 33
> 7 ++++++
> > > StandaloneMmPkg/Core/Notify.c | 203
> ++++
> > > StandaloneMmPkg/Core/Page.c | 384
> +++++++
> > > StandaloneMmPkg/Core/Pool.c | 287
> ++++++
> > > StandaloneMmPkg/Core/StandaloneMmCore.c | 708
> > > +++++++++++++
> > > StandaloneMmPkg/Core/StandaloneMmCore.h | 903
> > > +++++++++++++++++
> > > StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
> > > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231
> +++++
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 225
> ++++
> > > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
> > > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
> > > StandaloneMmPkg/Include/Guid/MmCoreData.h | 132
> +++
> > > StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
> > > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
> > > StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
> > > .../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
> > > StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
> > > StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
> > > .../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
> > > .../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
> > > StandaloneMmPkg/Include/StandaloneMm.h | 36 +
> > > StandaloneMmPkg/Library/FvLib/FvLib.c | 366
> +++++++
> > > StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
> > > StandaloneMmPkg/Library/HobLib/HobLib.c | 697
> > > +++++++++++++
> > > StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
> > > StandaloneMmPkg/Library/MemLib/MemLib.c | 276
> +++++
> > > StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
> > > .../MemoryAllocationLib/MemoryAllocationLib.c | 901
> > > ++++++++++++++++
> > > .../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
> > > .../MemoryAllocationLib/MemoryAllocationServices.h | 117 +++
> > > .../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
> > > .../Arm/SetPermissions.c | 278
> +++++
> > > .../Arm/StandaloneMmCoreEntryPoint.c | 265
> +++++
> > > .../StandaloneMmCoreEntryPoint.inf | 53 +
> > > .../StandaloneMmDriverEntryPoint.c | 102 ++
> > > .../StandaloneMmDriverEntryPoint.inf | 41 +
> > > StandaloneMmPkg/StandaloneMmPkg.dec | 47
> +
> > > StandaloneMmPkg/StandaloneMmPkg.dsc | 132
> +++
> > > StandaloneMmPkg/StandaloneMmPkg.fdf | 184
> ++++
> > > 55 files changed, 11699 insertions(+), 11 deletions(-)
> > > create mode 100644
> ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
> > > create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
> > > create mode 100644 StandaloneMmPkg/Core/Dependency.c
> > > create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
> > > create mode 100644 StandaloneMmPkg/Core/FwVol.c
> > > create mode 100644 StandaloneMmPkg/Core/Handle.c
> > > create mode 100644
> > > StandaloneMmPkg/Core/InstallConfigurationTable.c
> > > create mode 100644 StandaloneMmPkg/Core/Locate.c
> > > create mode 100644 StandaloneMmPkg/Core/Mmi.c
> > > create mode 100644 StandaloneMmPkg/Core/Notify.c
> > > create mode 100644 StandaloneMmPkg/Core/Page.c
> > > create mode 100644 StandaloneMmPkg/Core/Pool.c
> > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
> > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
> > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
> > > create mode 100644
> > > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
> > > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
> > > create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
> > > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
> > > create mode 100644
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
> > > create mode 100644
> > >
> StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
> > > create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
> > > create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
> > > create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
> > > create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
> > > create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
> > > create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
> > > create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
> > > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
> > > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
> > > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.c
> > > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
> > > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.c
> > > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
> > > create mode 100644
> > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
> > > create mode 100644
> > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.inf
> > > create mode 100644
> > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationService
> > > s.h
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobLis
> > > t.c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissio
> > > ns.
> > > c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMm
> > > CoreEntryPoint.c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCore
> > > E
> > > ntryPoint.inf
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > > iv
> > > erEntryPoint.c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > > iv
> > > erEntryPoint.inf
> > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
> > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
> > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
> > >
> > > --
> > > 2.14.1
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
2017-12-04 6:35 ` Yao, Jiewen
@ 2017-12-04 15:56 ` Supreeth Venkatesh
2018-04-06 14:55 ` Supreeth Venkatesh
1 sibling, 0 replies; 10+ messages in thread
From: Supreeth Venkatesh @ 2017-12-04 15:56 UTC (permalink / raw)
To: Yao, Jiewen, edk2-devel@lists.01.org; +Cc: leif.lindholm@linaro.org
Thank you for reviewing it.
I agree with all your comments.
I will work on them and send the patch set out on the mailing list sometime in the first week of Jan.
Supreeth
-----Original Message-----
From: Yao, Jiewen [mailto:jiewen.yao@intel.com]
Sent: Monday, December 4, 2017 12:36 AM
To: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>; edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org
Subject: RE: [edk2] [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
Thanks you very much.
Thanks for your patient. I have reviewed https://github.com/supven01/edk2.git (Branch: AArch64StandaloneMm)
Below is my thougth:
1) I do not have comment for ArmPkg related change. - I expect Arm expert can review that.
2) For "BaseTools/AutoGen: Update header file for MM modules."
I agree with you on that. (Reviewed-by: Jiewen.yao@intel.com) Would you please send separate patch for BaseTools owner to review?
3) For "MdePkg/Include: Add management mode FV file type and depex."
I agree with you on that. (Reviewed-by: Jiewen.yao@intel.com) Would you please send separate patch for MdePkg owner to review?
4) For "MdeModulePkg: Add application to test MM communication protocol."
Can we put UefiInfoApp to StandaloneMmPkg?
The gMmUefiInfoGuid is consumed by StandaloneMmPkg\Core\StandaloneMmCore.c, so I believe it more tights to StandaloneMmPkg.
I do not want to bother MdeModulePkg on that.
5) The rest are all StandaloneMmPkg.
5.1) For "StandaloneMmPkg: Add an AArch64 specific entry point library."
This seems not a generic lib.
Can we rename it to be: StandaloneMmCoreEntryPointArm?
If so, we do not need create Arm sub-folder there.
5.2) For "StandaloneMmPkg/HobLib: Add a common HOB Library for management mode."
This seems not a generic way to get the Hob.
Below API seems private one. It is not defined in HobLib. But a contract between StandaloneMmPkg\Library\StandaloneMmCoreEntryPoint\Arm\CreateHobList.c and StandaloneMmPkg\Library\HobLib\HobLib.c
EFI_HOB_HANDOFF_INFO_TABLE*
HobConstructor (
IN VOID *EfiMemoryBegin,
IN UINTN EfiMemoryLength,
IN VOID *EfiFreeMemoryBottom,
IN VOID *EfiFreeMemoryTop
)
This is typically not encourage. I am not sure if we have better way to resolve the issue.
But if there is not, I prefer we move it to be ArmSpecific HobLib, such as HobLibArmStandaloneMm.
5.3) For "StandaloneMmPkg/FvLib: Add a common FV Library for management mode."
Looks good.
5.4) For "StandaloneMmPkg/MemLib: Instance of memory check library."
It seems a compatibility issue, that we rename SmmMemLib to MmMemLib.
Maybe, we can add MmMemLib.h API, and move SmmMemLib content to MmMemLib, then let SmmMemLib call MmMemLib.
5.5) For "StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library."
May I know why you change " gSmst->SmmAllocatePool ();" to "MmAllocatePool ();"
An MM driver should not know the detail implementation of MmCore.
Can we just use gMmst->MmAllocatePool() here?
5.6) For "StandaloneMmPkg: MM driver entry point library."
Looks good.
5.7) For "StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Platforms."
It seems Arm specific. Can we rename to ArmCpuMm?
5.8) For "StandaloneMmPkg/Core: Implementation of Standalone MM Core Module."
I have not gone through all detail.
It seems quite similar to my previous one. So it is good.
5.9) For "StandaloneMmPkg: Add handler to handle event received from "uefiinfo"."
Looks good.
Thank you
Yao Jiewen
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Supreeth Venkatesh
> Sent: Friday, December 1, 2017 6:55 AM
> To: Yao, Jiewen <jiewen.yao@intel.com>; edk2-devel@lists.01.org
> Cc: leif.lindholm@linaro.org
> Subject: Re: [edk2] [RFC v1 00/15] *** Proposal for StandaloneMmPkg
> ***
>
> On Tue, 2017-11-28 at 07:00 +0000, Yao, Jiewen wrote:
> > HI
> > I am sorry that I missed this mail before.
> >
> > I found only 0/15 and 13/15 are in my mail box. :-( I do not know
> > why others are filtered.
> This was deliberate as PATCH 13/15 implements MM core code.
> Rest of them are/were AARCH64 Specific excluding the MM libraries.
> >
> > Is that possible to post the whole patch to your private git?
> > As such, we can review it in more efficient way.
> I have created a github repo below to review it in more efficient way.
>
> EDK2
> https://github.com/supven01/edk2.git
> (Branch: AArch64StandaloneMm)
>
> EDK2-PLATFORMS
> https://github.com/supven01/edk2-platforms.git
> (Branch: master)
>
> Also, we are in the process of updating these changes into edk2
> Staging repository here:
> https://github.com/tianocore/edk2-staging/tree/AArch64StandaloneMm
>
> I will send out PATCH set once you/team completes the review and give
> feedback/comments.
>
> >
> > Basically, I think it is a good idea to have StandaloneMmPkg to hold
> > all these features.
> Thank you for acknowledging this.
>
> >
> > Thank you
> > Yao Jiewen
> >
> > >
> > > -----Original Message-----
> > > From: Supreeth Venkatesh [mailto:supreeth.venkatesh@arm.com]
> > > Sent: Saturday, November 18, 2017 7:08 AM
> > > To: edk2-devel@lists.01.org
> > > Cc: leif.lindholm@linaro.org; Yao, Jiewen <jiewen.yao@intel.com>;
> > > Supreeth Venkatesh <supreeth.venkatesh@arm.com>
> > > Subject: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
> > >
> > > ***
> > > PI Specification v1.5 "Volume 4: Management Mode Core Interface"
> > > introduces the concept of MM Standalone Mode. Initialization of
> > > this mode can be done during the SEC phase (Section 1.5.2).
> > > On ARMv8-A systems, ARM Trusted Firmware is responsible for
> > > launching the normal world firmware e.g. UEFI.
> > >
> > > The Standalone MM environment is instantiated in Secure EL0 as a
> > > separate firmware volume. It executes as BL32 Image under control
> > > of ARM TF which is instantiated in EL3. Both components execute in
> > > the
> > > AArch64 execution
> > > state.
> > > This patchset will build upon the StandaloneSmmPkg module
> > > originally contributed by Intel.
> > >
> > > This package can be used in conjunction with ARM Trusted Firmware
> > > to recreate a simple MM secure environment that demonstrates
> > > communication between two UEFI images where one is executing in
> > > the normal world and the other is executing in the secure world.
> > >
> > > The normal world image includes:
> > > MM Communication DXE runtime driver that implements the protocol
> > > for communication with the MM environment in the secure world.
> > >
> > > The secure world image includes:
> > > The MM Standalone framework.
> > >
> > > This RFC patchset includes the proposed organization/structure and
> > > has architecture agnostic core changes only as a first pass.
> > > Once the organization/structure have been agreed upon, patchset
> > > for supporting libraries and AARCH64 implementation will be sent.
> > >
> > > Steps to build MM Standalone images In user preferred "work"
> > > directory, execute the following shell commands
> > >
> > > git clone https://github.com/tianocore/edk2.git
> > > git checkout master
> > >
> > > git clone https://github.com/tianocore/edk2-platforms.git
> > > git checkout master
> > >
> > > mkdir arm-tf
> > > cd arm-tf
> > > git clone https://github.com/ARM-software/arm-trusted-firmware.git
> > > .
> > > git checkout master
> > > cd ..
> > >
> > > git clone https://git.linaro.org/uefi/uefi-tools.git .
> > > git checkout master
> > >
> > > The following will build the MM Standalone image which runs in
> > > secure world.
> > > ./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
> > >
> > > The follwing will build the normal world UEFI image, ARM Trusted
> > > Firmware and a Firmware Image Package (FIP) that includes both the
> > > UEFI images.
> > > ./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
> > >
> > > Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware
> > > image package (fip) binary will be generated at:
> > >
> > > Build Output
> > > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
> > > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
> > >
> > > Steps to run MM Standalone image
> > > 1. Download the ARMv8 Architecture FVP from
> > >
> > > https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
> > > For more information, please refer
> > >
> > > https://developer.arm.com/products/system-design/fixed-virtual-pla
> > > t
> > > forms
> > > 2. Install FVP into preferred "work" directory.
> > > 3. Create a shell script "run_mm.sh" in the same folder where
> > > "FVP_Base_AEMv8A-AEMv8A" is present.
> > > Sample Shell script below:
> > > ./FVP_Base_AEMv8A-AEMv8A
> > > -C cache_state_modelled=0
> > > -C bp.secure_memory=1
> > > -C bp.tzc_400.diagnostics=1
> > > -C bp.pl011_uart0.untimed_fifos=0
> > > -C cluster1.NUM_CORES=4
> > > -C cluster0.NUM_CORES=4
> > > -C bp.pl011_uart0.out_file=uart0.output
> > > -C bp.pl011_uart1.out_file=uart1.output
> > > -C bp.pl011_uart2.out_file=uart2.output
> > > -C bp.pl011_uart3.out_file=uart3.output
> > > -C bp.secureflashloader.fname=""
> > > -C bp.flashloader0.fname=""
> > > -S -R
> > > 4. ./run_mm.sh
> > > 5. Output can be seen on FVP console.
> > > 6. The normal world will boot to the UEFI shell.
> > >
> > > Sample Output
> > >
> > > MM Standalone Output (FVP UART2)
> > > SPM Version: Major=0x0, Minor=0x1
> > > NumSpMemRegions - 0x6
> > > SpMemBase - 0xFF200000
> > > SpMemLimit - 0x100000000
> > > SpImageBase - 0xFF200000
> > > SpStackBase - 0xFF610000
> > > SpHeapBase - 0xFF620000
> > > SpNsCommBufBase - 0xFF600000
> > > SpSharedBufBase - 0xFF500000
> > > SpImageSize - 0x300000
> > > SpPcpuStackSize - 0x2000
> > > SpHeapSize - 0x9E0000
> > > SpNsCommBufSize - 0x10000
> > > SpPcpuSharedBufSize - 0x20000
> > > NumCpus - 0x8
> > > CpuInfo - 0xFF500680
> > > Mpidr - 0x80000000
> > > LinearId - 0x0
> > > Flags - 0x1
> > > Mpidr - 0x80000001
> > > LinearId - 0x1
> > > Flags - 0x0
> > > Mpidr - 0x80000002
> > > LinearId - 0x2
> > > Flags - 0x0
> > > Mpidr - 0x80000003
> > > LinearId - 0x3
> > > Flags - 0x0
> > > Mpidr - 0x80000100
> > > LinearId - 0x4
> > > Flags - 0x0
> > > Mpidr - 0x80000101
> > > LinearId - 0x5
> > > Flags - 0x0
> > > Mpidr - 0x80000102
> > > LinearId - 0x6
> > > Flags - 0x0
> > > Mpidr - 0x80000103
> > > LinearId - 0x7
> > > Flags - 0x0
> > > Found Standalone MM PE data - 0xFF201000 Found Standalone MM PE
> > > data - 0xFF201000 Standalone MM Core PE-COFF SectionHeaderOffset -
> > > 0xF60, NumberOfSections
> > > - 3
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000 has
> > > 0x60000020 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000
> > > has .et name
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000 has
> > > 0xFF202000 address
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000 has
> > > 0x1000 data
> > > UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image
> > > at
> > > 0xFF201000 with 0x60000020 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000 has
> > > 0xC0000040 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000
> > > has .aa name
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000 has
> > > 0xFF217000 address
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000 has
> > > 0x16000 data
> > > UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at
> > > 0xFF201000 with RW-XN permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000 has
> > > 0x42000040 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000
> > > has .eo name
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000 has
> > > 0xFF218000 address
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000 has
> > > 0x17000 data
> > > UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at
> > > 0xFF201000 with RO-XN permissions
> > > StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
> > > MmramRangeCount - 0x6
> > > MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
> > > MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
> > > MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
> > > MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
> > > MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
> > > MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
> > > MmInitializeMemoryServices MmAddMemoryRegion 0 :
> > > 0x00000000FF200000 - 0x0000000000300000 MmAddMemoryRegion 1 :
> > > 0x00000000FF500000 - 0x0000000000100000 MmAddMemoryRegion 2 :
> > > 0x00000000FF600000 - 0x0000000000010000 MmAddMemoryRegion 3 :
> > > 0x00000000FF610000 - 0x0000000000010000 MmAddMemoryRegion 4 :
> > > 0x00000000FF620000 - 0x00000000000002C8 MmAddMemoryRegion 5 :
> > > 0x00000000FF6202C8 - 0x00000000009DFD38
> > > mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF MmMain -
> > > 0xFF620000 MmramRangeCount - 0x6
> > > MmramRanges[0]: 0x00000000FF200000 - 0x300000
> > > MmramRanges[1]: 0x00000000FF500000 - 0x100000
> > > MmramRanges[2]: 0x00000000FF600000 - 0x10000
> > > MmramRanges[3]: 0x00000000FF610000 - 0x10000
> > > MmramRanges[4]: 0x00000000FF620000 - 0x2C8
> > > MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38 mMmramRangeCount -
> > > 0x6 mMmramRanges - 0xFFFFEE10 BFV address - 0xFF200000 BFV size
> > > - 0x300000 MmInstallConfigurationTable For HobList HobSize - 0x2C8
> > > MmHobStart - 0xFFFFE810 MmRegisterProtocolNotify -
> > > MmConfigurationMmProtocol Mm Dispatch StandaloneBfvAddress -
> > > 0xFF200000 MmCoreFfsFindMmDriver - 0xFF200000 FvIsBeingProcesssed
> > > - 0xFF200000 Check MmFileTypes - 0xA Check MmFileTypes - 0xE Find
> > > PE data - 0xFF219024 MmAddToDriverList -
> > > 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > (0xFF219024)
> > > MmDispatcher
> > > Drain the Scheduled Queue
> > > Search DriverList for items to place on Scheduled Queue
> > > DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
> > > TRUE
> > > END
> > > RESULT = TRUE
> > > Drain the Scheduled Queue
> > > DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > > with RO-XN permissions and size 0x7000
> > > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > > with RO-X permissions and size 0x7000
> > > UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000
> > > with RW-XN permissions and size 0x1000
> > > UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000
> > > with RO-XN permissions and size 0x1000 add-symbol-file
> > >
> /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5
> > >
> /AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpu
> > > Driver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000 Loading MM
> > > driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000
> > > PiMmStandloneArmTfCpuDriver.efi StartImage - 0xFFFE7000
> > > (Standalone Mode)
> > > MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7
> > > FFFEE008
> > > MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) -
> > > FFFEE008
> > > MM Core registered MM Entry Point address FF2041C0
> > > MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569
> > > FFFEE018
> > > Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
> > > mNsCommBuffer.PhysicalStart - 0xFF600000
> > > mNsCommBuffer.PhysicalSize - 0x10000
> > > mNsCommBuffer: 0x00000000FF600000 - 0x10000
> > > mMpInformationHobData: 0x0000000000000008 - 0x8
> > > mMpInformationHobData[0x80000000]: 0, 0, 0
> > > mMpInformationHobData[0x80000001]: 0, 1, 1
> > > mMpInformationHobData[0x80000002]: 0, 2, 2
> > > mMpInformationHobData[0x80000003]: 0, 3, 3
> > > mMpInformationHobData[0x80000100]: 1, 0, 0
> > > mMpInformationHobData[0x80000101]: 1, 1, 1
> > > mMpInformationHobData[0x80000102]: 1, 2, 2
> > > mMpInformationHobData[0x80000103]: 1, 3, 3 MmiHandlerRegister -
> > > GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF - Status 0
> > > MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 -
> > > Status 0 MmiHandlerRegister - GUID
> > > 60FF8964-E906-41D0-AFED-F241E974E08E - Status
> > > 0
> > > MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 -
> > > Status 0 MmiHandlerRegister - GUID
> > > 2A571201-4966-47F6-8B86-F31E41F32F10 - Status
> > > 0
> > > MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF -
> > > Status 0 MmiHandlerRegister - GUID
> > > 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B - Status 0 MmMain Done!
> > > Shared Cpu Driver EP 0xFFFE798C
> > >
> > > ARM TF (FVP UART0)
> > > NOTICE: Booting Trusted Firmware
> > > NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > NOTICE: BL1: Built : 16:14:26, Nov 1 2017
> > > INFO: BL1: RAM 0x4036000 - 0x403c000
> > > INFO: BL1: Loading BL2
> > > INFO: Loading image id=1 at address 0x4027000
> > > INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
> > > NOTICE: BL1: Booting BL2
> > > INFO: Entry point address = 0x4027000
> > > INFO: SPSR = 0x3c5
> > > NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > NOTICE: BL2: Built : 16:14:26, Nov 1 2017
> > > INFO: BL2: Doing platform setup
> > > INFO: Configuring TrustZone Controller
> > > INFO: BL2: Loading image id 3
> > > INFO: Loading image id=3 at address 0xff000000
> > > INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
> > > INFO: BL2: Loading image id 4
> > > INFO: Loading image id=4 at address 0xff200000
> > > INFO: Image id=4 loaded: 0xff200000 - 0xff480000
> > > INFO: BL2: Loading image id 5
> > > INFO: Loading image id=5 at address 0x88000000
> > > INFO: Image id=5 loaded: 0x88000000 - 0x88280000
> > > NOTICE: BL1: Booting BL31
> > > INFO: Entry point address = 0xff000000
> > > INFO: SPSR = 0x3cd
> > > NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > NOTICE: BL31: Built : 16:14:26, Nov 1 2017
> > > INFO: GICv3 with legacy support detected. ARM GICV3 driver
> > > initialized in
> > > EL3
> > > INFO: BL31: Initializing runtime services
> > > INFO: BL31: Initializing BL32
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xff217000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xff217000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x5
> > > NOTICE: (Equivalent TF attributes: 0x2a)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xff218000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xfffe7000
> > > NOTICE: Number of pages: 7 (28672 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xfffe7000
> > > NOTICE: Number of pages: 7 (28672 bytes)
> > > NOTICE: Attributes : 0x3
> > > NOTICE: (Equivalent TF attributes: 0x2)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xfffef000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > INFO: BL31: Preparing for EL3 exit to normal world
> > > INFO: Entry point address = 0x88000000
> > > INFO: SPSR = 0x3c9
> > > UEFI firmware (version built at 16:14:14 on Nov 1 2017)
> > >
> > > ***
> > >
> > > Supreeth Venkatesh (15):
> > > ArmPkg/Include: Add MM interface SVC return codes.
> > > BaseTools/AutoGen: Update header file for MM modules.
> > > ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> > > ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in
> > > S- EL0.
> > > MdePkg/Include: Add management mode FV file type and depex.
> > > StandaloneMmPkg/StandaloneMmCoreEntryPoint: Add an AArch64
> > > specific
> > > entry point library.
> > > StandaloneMmPkg/HobLib: Add a common HOB Library for management
> > > mode.
> > > StandaloneMmPkg/FvLib: Add a common FV Library for management
> > > mode.
> > > StandaloneMmPkg/MemLib: Instance of management mode memory
> check
> > > library.
> > > StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation
> > > library.
> > > StandaloneMmPkg/StandaloneMmDriverEntryPoint: MM driver entry
> > > point
> > > library.
> > > StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Standard
> > > Platforms.
> > > StandaloneMmPkg/Core: Implementation of Standalone MM Core
> > > Module.
> > > StandaloneMmPkg: Describe the package declaration, definition
> > > and fdf
> > > files.
> > > ArmPkg/DebugPeCoffExtraActionLib: Add UpdatePeCoffPermissions
> > > for
> > > S-ELO MM.
> > >
> > > ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> > > ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146
> +++
> > > ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
> > > .../DebugPeCoffExtraActionLib.c | 167 ++-
> > > .../DebugPeCoffExtraActionLib.inf | 7 +
> > > BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
> > > MdePkg/Include/Pi/PiFirmwareFile.h | 4 +
> > > StandaloneMmPkg/Core/Dependency.c | 389
> +++++++
> > > StandaloneMmPkg/Core/Dispatcher.c | 1071
> > > ++++++++++++++++++++
> > > StandaloneMmPkg/Core/FwVol.c | 104
> ++
> > > StandaloneMmPkg/Core/Handle.c | 533
> > > ++++++++++
> > > StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
> > > StandaloneMmPkg/Core/Locate.c | 496
> > > +++++++++
> > > StandaloneMmPkg/Core/Mmi.c | 33
> 7 ++++++
> > > StandaloneMmPkg/Core/Notify.c | 203
> ++++
> > > StandaloneMmPkg/Core/Page.c | 384
> +++++++
> > > StandaloneMmPkg/Core/Pool.c | 287
> ++++++
> > > StandaloneMmPkg/Core/StandaloneMmCore.c | 708
> > > +++++++++++++
> > > StandaloneMmPkg/Core/StandaloneMmCore.h | 903
> > > +++++++++++++++++
> > > StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
> > > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231
> +++++
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 225
> ++++
> > > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
> > > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
> > > StandaloneMmPkg/Include/Guid/MmCoreData.h | 132
> +++
> > > StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
> > > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
> > > StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
> > > .../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
> > > StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
> > > StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
> > > .../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
> > > .../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
> > > StandaloneMmPkg/Include/StandaloneMm.h | 36 +
> > > StandaloneMmPkg/Library/FvLib/FvLib.c | 366
> +++++++
> > > StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
> > > StandaloneMmPkg/Library/HobLib/HobLib.c | 697
> > > +++++++++++++
> > > StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
> > > StandaloneMmPkg/Library/MemLib/MemLib.c | 276
> +++++
> > > StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
> > > .../MemoryAllocationLib/MemoryAllocationLib.c | 901
> > > ++++++++++++++++
> > > .../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
> > > .../MemoryAllocationLib/MemoryAllocationServices.h | 117 +++
> > > .../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
> > > .../Arm/SetPermissions.c | 278
> +++++
> > > .../Arm/StandaloneMmCoreEntryPoint.c | 265
> +++++
> > > .../StandaloneMmCoreEntryPoint.inf | 53 +
> > > .../StandaloneMmDriverEntryPoint.c | 102 ++
> > > .../StandaloneMmDriverEntryPoint.inf | 41 +
> > > StandaloneMmPkg/StandaloneMmPkg.dec | 47
> +
> > > StandaloneMmPkg/StandaloneMmPkg.dsc | 132
> +++
> > > StandaloneMmPkg/StandaloneMmPkg.fdf | 184
> ++++
> > > 55 files changed, 11699 insertions(+), 11 deletions(-)
> > > create mode 100644
> ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
> > > create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
> > > create mode 100644 StandaloneMmPkg/Core/Dependency.c
> > > create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
> > > create mode 100644 StandaloneMmPkg/Core/FwVol.c
> > > create mode 100644 StandaloneMmPkg/Core/Handle.c
> > > create mode 100644
> > > StandaloneMmPkg/Core/InstallConfigurationTable.c
> > > create mode 100644 StandaloneMmPkg/Core/Locate.c
> > > create mode 100644 StandaloneMmPkg/Core/Mmi.c
> > > create mode 100644 StandaloneMmPkg/Core/Notify.c
> > > create mode 100644 StandaloneMmPkg/Core/Page.c
> > > create mode 100644 StandaloneMmPkg/Core/Pool.c
> > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
> > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
> > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
> > > create mode 100644
> > > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
> > > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
> > > create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
> > > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
> > > create mode 100644
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
> > > create mode 100644
> > >
> StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
> > > create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
> > > create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
> > > create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
> > > create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
> > > create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
> > > create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
> > > create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
> > > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
> > > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
> > > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.c
> > > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
> > > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.c
> > > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
> > > create mode 100644
> > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
> > > create mode 100644
> > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.in
> > > f
> > > create mode 100644
> > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationServic
> > > e
> > > s.h
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobLis
> > > t.c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissio
> > > ns.
> > > c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMm
> > > CoreEntryPoint.c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCore
> > > E
> > > ntryPoint.inf
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > > iv
> > > erEntryPoint.c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > > iv
> > > erEntryPoint.inf
> > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
> > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
> > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
> > >
> > > --
> > > 2.14.1
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
2017-12-04 6:35 ` Yao, Jiewen
2017-12-04 15:56 ` Supreeth Venkatesh
@ 2018-04-06 14:55 ` Supreeth Venkatesh
2018-04-08 5:28 ` Yao, Jiewen
1 sibling, 1 reply; 10+ messages in thread
From: Supreeth Venkatesh @ 2018-04-06 14:55 UTC (permalink / raw)
To: Yao, Jiewen, edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, Achin Gupta
Jiewen,
My response inline for some of the comments.
I have posted new series of patches. Please review them and provide feedback.
Thanks,
Supreeth
-----Original Message-----
From: Yao, Jiewen <jiewen.yao@intel.com>
Sent: Monday, December 4, 2017 12:36 AM
To: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>; edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org
Subject: RE: [edk2] [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
Thanks you very much.
Thanks for your patient. I have reviewed https://github.com/supven01/edk2.git (Branch: AArch64StandaloneMm)
Below is my thougth:
1) I do not have comment for ArmPkg related change. - I expect Arm expert can review that.
2) For "BaseTools/AutoGen: Update header file for MM modules."
I agree with you on that. (Reviewed-by: Jiewen.yao@intel.com) Would you please send separate patch for BaseTools owner to review?
[Supreeth] already Merged.
3) For "MdePkg/Include: Add management mode FV file type and depex."
I agree with you on that. (Reviewed-by: Jiewen.yao@intel.com) Would you please send separate patch for MdePkg owner to review?
[Supreeth] Posted Patch. Maintainers waiting on StandaloneMmPkg changes to be merged.
4) For "MdeModulePkg: Add application to test MM communication protocol."
Can we put UefiInfoApp to StandaloneMmPkg?
The gMmUefiInfoGuid is consumed by StandaloneMmPkg\Core\StandaloneMmCore.c, so I believe it more tights to StandaloneMmPkg.
I do not want to bother MdeModulePkg on that.
[Supreeth] Modified. Done.
5) The rest are all StandaloneMmPkg.
5.1) For "StandaloneMmPkg: Add an AArch64 specific entry point library."
This seems not a generic lib.
Can we rename it to be: StandaloneMmCoreEntryPointArm?
If so, we do not need create Arm sub-folder there.
[Supreeth] I created an Arm sub-folder so that it can be extensible to other architectures, if some other architecture wants to reuse this ARM Specific library and extend it.
Also, In the inf file, Arm specific source files are under [Sources.AARCH64]. Let me know if you prefer renaming as opposed to creating a sub folder.
5.2) For "StandaloneMmPkg/HobLib: Add a common HOB Library for management mode."
This seems not a generic way to get the Hob.
Below API seems private one. It is not defined in HobLib. But a contract between StandaloneMmPkg\Library\StandaloneMmCoreEntryPoint\Arm\CreateHobList.c and StandaloneMmPkg\Library\HobLib\HobLib.c
EFI_HOB_HANDOFF_INFO_TABLE*
HobConstructor (
IN VOID *EfiMemoryBegin,
IN UINTN EfiMemoryLength,
IN VOID *EfiFreeMemoryBottom,
IN VOID *EfiFreeMemoryTop
)
This is typically not encourage. I am not sure if we have better way to resolve the issue.
But if there is not, I prefer we move it to be ArmSpecific HobLib, such as HobLibArmStandaloneMm.
[Supreeth] For the moment, I don’t have a better way. I have made it Arm specific by creating a subfolder "Arm" and sources in inf file under [Sources.AARCH64].
5.3) For "StandaloneMmPkg/FvLib: Add a common FV Library for management mode."
Looks good.
5.4) For "StandaloneMmPkg/MemLib: Instance of memory check library."
It seems a compatibility issue, that we rename SmmMemLib to MmMemLib.
Maybe, we can add MmMemLib.h API, and move SmmMemLib content to MmMemLib, then let SmmMemLib call MmMemLib.
[Supreeth] MmMemLib differs significantly from SmmMemLib as SmmMemLib has some intel specific physical address bits, some memory map references.
So I have moved this as ARM specific library at this point with scope for refactoring.
5.5) For "StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation library."
May I know why you change " gSmst->SmmAllocatePool ();" to "MmAllocatePool ();"
An MM driver should not know the detail implementation of MmCore.
Can we just use gMmst->MmAllocatePool() here?
[Supreeth] I modified it to use gMmst->MmXXXXXXXXX() Apis.
5.6) For "StandaloneMmPkg: MM driver entry point library."
Looks good.
5.7) For "StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Platforms."
It seems Arm specific. Can we rename to ArmCpuMm?
[Supreeth] I created an Arm sub-folder within CpuMm so that it can be extensible to other architectures, if some other architecture wants to reuse this ARM Specific cpu mm driver and extend it.
Also, in DSC file, this is included under [Components.AARCH64] . Let me know if you prefer renaming as opposed to creating a sub folder.
5.8) For "StandaloneMmPkg/Core: Implementation of Standalone MM Core Module."
I have not gone through all detail.
It seems quite similar to my previous one. So it is good.
5.9) For "StandaloneMmPkg: Add handler to handle event received from "uefiinfo"."
Looks good.
Thank you
Yao Jiewen
> -----Original Message-----
> From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> Supreeth Venkatesh
> Sent: Friday, December 1, 2017 6:55 AM
> To: Yao, Jiewen <jiewen.yao@intel.com>; edk2-devel@lists.01.org
> Cc: leif.lindholm@linaro.org
> Subject: Re: [edk2] [RFC v1 00/15] *** Proposal for StandaloneMmPkg
> ***
>
> On Tue, 2017-11-28 at 07:00 +0000, Yao, Jiewen wrote:
> > HI
> > I am sorry that I missed this mail before.
> >
> > I found only 0/15 and 13/15 are in my mail box. :-( I do not know
> > why others are filtered.
> This was deliberate as PATCH 13/15 implements MM core code.
> Rest of them are/were AARCH64 Specific excluding the MM libraries.
> >
> > Is that possible to post the whole patch to your private git?
> > As such, we can review it in more efficient way.
> I have created a github repo below to review it in more efficient way.
>
> EDK2
> https://github.com/supven01/edk2.git
> (Branch: AArch64StandaloneMm)
>
> EDK2-PLATFORMS
> https://github.com/supven01/edk2-platforms.git
> (Branch: master)
>
> Also, we are in the process of updating these changes into edk2
> Staging repository here:
> https://github.com/tianocore/edk2-staging/tree/AArch64StandaloneMm
>
> I will send out PATCH set once you/team completes the review and give
> feedback/comments.
>
> >
> > Basically, I think it is a good idea to have StandaloneMmPkg to hold
> > all these features.
> Thank you for acknowledging this.
>
> >
> > Thank you
> > Yao Jiewen
> >
> > >
> > > -----Original Message-----
> > > From: Supreeth Venkatesh [mailto:supreeth.venkatesh@arm.com]
> > > Sent: Saturday, November 18, 2017 7:08 AM
> > > To: edk2-devel@lists.01.org
> > > Cc: leif.lindholm@linaro.org; Yao, Jiewen <jiewen.yao@intel.com>;
> > > Supreeth Venkatesh <supreeth.venkatesh@arm.com>
> > > Subject: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
> > >
> > > ***
> > > PI Specification v1.5 "Volume 4: Management Mode Core Interface"
> > > introduces the concept of MM Standalone Mode. Initialization of
> > > this mode can be done during the SEC phase (Section 1.5.2).
> > > On ARMv8-A systems, ARM Trusted Firmware is responsible for
> > > launching the normal world firmware e.g. UEFI.
> > >
> > > The Standalone MM environment is instantiated in Secure EL0 as a
> > > separate firmware volume. It executes as BL32 Image under control
> > > of ARM TF which is instantiated in EL3. Both components execute in
> > > the
> > > AArch64 execution
> > > state.
> > > This patchset will build upon the StandaloneSmmPkg module
> > > originally contributed by Intel.
> > >
> > > This package can be used in conjunction with ARM Trusted Firmware
> > > to recreate a simple MM secure environment that demonstrates
> > > communication between two UEFI images where one is executing in
> > > the normal world and the other is executing in the secure world.
> > >
> > > The normal world image includes:
> > > MM Communication DXE runtime driver that implements the protocol
> > > for communication with the MM environment in the secure world.
> > >
> > > The secure world image includes:
> > > The MM Standalone framework.
> > >
> > > This RFC patchset includes the proposed organization/structure and
> > > has architecture agnostic core changes only as a first pass.
> > > Once the organization/structure have been agreed upon, patchset
> > > for supporting libraries and AARCH64 implementation will be sent.
> > >
> > > Steps to build MM Standalone images In user preferred "work"
> > > directory, execute the following shell commands
> > >
> > > git clone https://github.com/tianocore/edk2.git
> > > git checkout master
> > >
> > > git clone https://github.com/tianocore/edk2-platforms.git
> > > git checkout master
> > >
> > > mkdir arm-tf
> > > cd arm-tf
> > > git clone https://github.com/ARM-software/arm-trusted-firmware.git
> > > .
> > > git checkout master
> > > cd ..
> > >
> > > git clone https://git.linaro.org/uefi/uefi-tools.git .
> > > git checkout master
> > >
> > > The following will build the MM Standalone image which runs in
> > > secure world.
> > > ./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
> > >
> > > The follwing will build the normal world UEFI image, ARM Trusted
> > > Firmware and a Firmware Image Package (FIP) that includes both the
> > > UEFI images.
> > > ./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
> > >
> > > Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware
> > > image package (fip) binary will be generated at:
> > >
> > > Build Output
> > > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
> > > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
> > >
> > > Steps to run MM Standalone image
> > > 1. Download the ARMv8 Architecture FVP from
> > >
> > > https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
> > > For more information, please refer
> > >
> > > https://developer.arm.com/products/system-design/fixed-virtual-pla
> > > t
> > > forms
> > > 2. Install FVP into preferred "work" directory.
> > > 3. Create a shell script "run_mm.sh" in the same folder where
> > > "FVP_Base_AEMv8A-AEMv8A" is present.
> > > Sample Shell script below:
> > > ./FVP_Base_AEMv8A-AEMv8A
> > > -C cache_state_modelled=0
> > > -C bp.secure_memory=1
> > > -C bp.tzc_400.diagnostics=1
> > > -C bp.pl011_uart0.untimed_fifos=0
> > > -C cluster1.NUM_CORES=4
> > > -C cluster0.NUM_CORES=4
> > > -C bp.pl011_uart0.out_file=uart0.output
> > > -C bp.pl011_uart1.out_file=uart1.output
> > > -C bp.pl011_uart2.out_file=uart2.output
> > > -C bp.pl011_uart3.out_file=uart3.output
> > > -C bp.secureflashloader.fname=""
> > > -C bp.flashloader0.fname=""
> > > -S -R
> > > 4. ./run_mm.sh
> > > 5. Output can be seen on FVP console.
> > > 6. The normal world will boot to the UEFI shell.
> > >
> > > Sample Output
> > >
> > > MM Standalone Output (FVP UART2)
> > > SPM Version: Major=0x0, Minor=0x1
> > > NumSpMemRegions - 0x6
> > > SpMemBase - 0xFF200000
> > > SpMemLimit - 0x100000000
> > > SpImageBase - 0xFF200000
> > > SpStackBase - 0xFF610000
> > > SpHeapBase - 0xFF620000
> > > SpNsCommBufBase - 0xFF600000
> > > SpSharedBufBase - 0xFF500000
> > > SpImageSize - 0x300000
> > > SpPcpuStackSize - 0x2000
> > > SpHeapSize - 0x9E0000
> > > SpNsCommBufSize - 0x10000
> > > SpPcpuSharedBufSize - 0x20000
> > > NumCpus - 0x8
> > > CpuInfo - 0xFF500680
> > > Mpidr - 0x80000000
> > > LinearId - 0x0
> > > Flags - 0x1
> > > Mpidr - 0x80000001
> > > LinearId - 0x1
> > > Flags - 0x0
> > > Mpidr - 0x80000002
> > > LinearId - 0x2
> > > Flags - 0x0
> > > Mpidr - 0x80000003
> > > LinearId - 0x3
> > > Flags - 0x0
> > > Mpidr - 0x80000100
> > > LinearId - 0x4
> > > Flags - 0x0
> > > Mpidr - 0x80000101
> > > LinearId - 0x5
> > > Flags - 0x0
> > > Mpidr - 0x80000102
> > > LinearId - 0x6
> > > Flags - 0x0
> > > Mpidr - 0x80000103
> > > LinearId - 0x7
> > > Flags - 0x0
> > > Found Standalone MM PE data - 0xFF201000 Found Standalone MM PE
> > > data - 0xFF201000 Standalone MM Core PE-COFF SectionHeaderOffset -
> > > 0xF60, NumberOfSections
> > > - 3
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000 has
> > > 0x60000020 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000
> > > has .et name
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000 has
> > > 0xFF202000 address
> > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > 0xFF201000 has
> > > 0x1000 data
> > > UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image
> > > at
> > > 0xFF201000 with 0x60000020 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000 has
> > > 0xC0000040 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000
> > > has .aa name
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000 has
> > > 0xFF217000 address
> > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > 0xFF201000 has
> > > 0x16000 data
> > > UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at
> > > 0xFF201000 with RW-XN permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000 has
> > > 0x42000040 permissions
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000
> > > has .eo name
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000 has
> > > 0xFF218000 address
> > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > 0xFF201000 has
> > > 0x17000 data
> > > UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at
> > > 0xFF201000 with RO-XN permissions
> > > StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
> > > MmramRangeCount - 0x6
> > > MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
> > > MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
> > > MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
> > > MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
> > > MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
> > > MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
> > > MmInitializeMemoryServices MmAddMemoryRegion 0 :
> > > 0x00000000FF200000 - 0x0000000000300000 MmAddMemoryRegion 1 :
> > > 0x00000000FF500000 - 0x0000000000100000 MmAddMemoryRegion 2 :
> > > 0x00000000FF600000 - 0x0000000000010000 MmAddMemoryRegion 3 :
> > > 0x00000000FF610000 - 0x0000000000010000 MmAddMemoryRegion 4 :
> > > 0x00000000FF620000 - 0x00000000000002C8 MmAddMemoryRegion 5 :
> > > 0x00000000FF6202C8 - 0x00000000009DFD38
> > > mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF MmMain -
> > > 0xFF620000 MmramRangeCount - 0x6
> > > MmramRanges[0]: 0x00000000FF200000 - 0x300000
> > > MmramRanges[1]: 0x00000000FF500000 - 0x100000
> > > MmramRanges[2]: 0x00000000FF600000 - 0x10000
> > > MmramRanges[3]: 0x00000000FF610000 - 0x10000
> > > MmramRanges[4]: 0x00000000FF620000 - 0x2C8
> > > MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38 mMmramRangeCount -
> > > 0x6 mMmramRanges - 0xFFFFEE10 BFV address - 0xFF200000 BFV size
> > > - 0x300000 MmInstallConfigurationTable For HobList HobSize - 0x2C8
> > > MmHobStart - 0xFFFFE810 MmRegisterProtocolNotify -
> > > MmConfigurationMmProtocol Mm Dispatch StandaloneBfvAddress -
> > > 0xFF200000 MmCoreFfsFindMmDriver - 0xFF200000 FvIsBeingProcesssed
> > > - 0xFF200000 Check MmFileTypes - 0xA Check MmFileTypes - 0xE Find
> > > PE data - 0xFF219024 MmAddToDriverList -
> > > 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > (0xFF219024)
> > > MmDispatcher
> > > Drain the Scheduled Queue
> > > Search DriverList for items to place on Scheduled Queue
> > > DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
> > > TRUE
> > > END
> > > RESULT = TRUE
> > > Drain the Scheduled Queue
> > > DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > > with RO-XN permissions and size 0x7000
> > > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > > with RO-X permissions and size 0x7000
> > > UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000
> > > with RW-XN permissions and size 0x1000
> > > UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000
> > > with RO-XN permissions and size 0x1000 add-symbol-file
> > >
> /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5
> > >
> /AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpu
> > > Driver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000 Loading MM
> > > driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000
> > > PiMmStandloneArmTfCpuDriver.efi StartImage - 0xFFFE7000
> > > (Standalone Mode)
> > > MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7
> > > FFFEE008
> > > MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7) -
> > > FFFEE008
> > > MM Core registered MM Entry Point address FF2041C0
> > > MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569
> > > FFFEE018
> > > Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
> > > mNsCommBuffer.PhysicalStart - 0xFF600000
> > > mNsCommBuffer.PhysicalSize - 0x10000
> > > mNsCommBuffer: 0x00000000FF600000 - 0x10000
> > > mMpInformationHobData: 0x0000000000000008 - 0x8
> > > mMpInformationHobData[0x80000000]: 0, 0, 0
> > > mMpInformationHobData[0x80000001]: 0, 1, 1
> > > mMpInformationHobData[0x80000002]: 0, 2, 2
> > > mMpInformationHobData[0x80000003]: 0, 3, 3
> > > mMpInformationHobData[0x80000100]: 1, 0, 0
> > > mMpInformationHobData[0x80000101]: 1, 1, 1
> > > mMpInformationHobData[0x80000102]: 1, 2, 2
> > > mMpInformationHobData[0x80000103]: 1, 3, 3 MmiHandlerRegister -
> > > GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF - Status 0
> > > MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 -
> > > Status 0 MmiHandlerRegister - GUID
> > > 60FF8964-E906-41D0-AFED-F241E974E08E - Status
> > > 0
> > > MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 -
> > > Status 0 MmiHandlerRegister - GUID
> > > 2A571201-4966-47F6-8B86-F31E41F32F10 - Status
> > > 0
> > > MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF -
> > > Status 0 MmiHandlerRegister - GUID
> > > 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B - Status 0 MmMain Done!
> > > Shared Cpu Driver EP 0xFFFE798C
> > >
> > > ARM TF (FVP UART0)
> > > NOTICE: Booting Trusted Firmware
> > > NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > NOTICE: BL1: Built : 16:14:26, Nov 1 2017
> > > INFO: BL1: RAM 0x4036000 - 0x403c000
> > > INFO: BL1: Loading BL2
> > > INFO: Loading image id=1 at address 0x4027000
> > > INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
> > > NOTICE: BL1: Booting BL2
> > > INFO: Entry point address = 0x4027000
> > > INFO: SPSR = 0x3c5
> > > NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > NOTICE: BL2: Built : 16:14:26, Nov 1 2017
> > > INFO: BL2: Doing platform setup
> > > INFO: Configuring TrustZone Controller
> > > INFO: BL2: Loading image id 3
> > > INFO: Loading image id=3 at address 0xff000000
> > > INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
> > > INFO: BL2: Loading image id 4
> > > INFO: Loading image id=4 at address 0xff200000
> > > INFO: Image id=4 loaded: 0xff200000 - 0xff480000
> > > INFO: BL2: Loading image id 5
> > > INFO: Loading image id=5 at address 0x88000000
> > > INFO: Image id=5 loaded: 0x88000000 - 0x88280000
> > > NOTICE: BL1: Booting BL31
> > > INFO: Entry point address = 0xff000000
> > > INFO: SPSR = 0x3cd
> > > NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > NOTICE: BL31: Built : 16:14:26, Nov 1 2017
> > > INFO: GICv3 with legacy support detected. ARM GICV3 driver
> > > initialized in
> > > EL3
> > > INFO: BL31: Initializing runtime services
> > > INFO: BL31: Initializing BL32
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xff217000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xff217000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x5
> > > NOTICE: (Equivalent TF attributes: 0x2a)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xff218000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xfffe7000
> > > NOTICE: Number of pages: 7 (28672 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xfffe7000
> > > NOTICE: Number of pages: 7 (28672 bytes)
> > > NOTICE: Attributes : 0x3
> > > NOTICE: (Equivalent TF attributes: 0x2)
> > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > NOTICE: Start address : 0xfffef000
> > > NOTICE: Number of pages: 1 (4096 bytes)
> > > NOTICE: Attributes : 0x7
> > > NOTICE: (Equivalent TF attributes: 0x22)
> > > INFO: BL31: Preparing for EL3 exit to normal world
> > > INFO: Entry point address = 0x88000000
> > > INFO: SPSR = 0x3c9
> > > UEFI firmware (version built at 16:14:14 on Nov 1 2017)
> > >
> > > ***
> > >
> > > Supreeth Venkatesh (15):
> > > ArmPkg/Include: Add MM interface SVC return codes.
> > > BaseTools/AutoGen: Update header file for MM modules.
> > > ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> > > ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in
> > > S- EL0.
> > > MdePkg/Include: Add management mode FV file type and depex.
> > > StandaloneMmPkg/StandaloneMmCoreEntryPoint: Add an AArch64
> > > specific
> > > entry point library.
> > > StandaloneMmPkg/HobLib: Add a common HOB Library for management
> > > mode.
> > > StandaloneMmPkg/FvLib: Add a common FV Library for management
> > > mode.
> > > StandaloneMmPkg/MemLib: Instance of management mode memory
> check
> > > library.
> > > StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation
> > > library.
> > > StandaloneMmPkg/StandaloneMmDriverEntryPoint: MM driver entry
> > > point
> > > library.
> > > StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Standard
> > > Platforms.
> > > StandaloneMmPkg/Core: Implementation of Standalone MM Core
> > > Module.
> > > StandaloneMmPkg: Describe the package declaration, definition
> > > and fdf
> > > files.
> > > ArmPkg/DebugPeCoffExtraActionLib: Add UpdatePeCoffPermissions
> > > for
> > > S-ELO MM.
> > >
> > > ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> > > ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146
> +++
> > > ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
> > > .../DebugPeCoffExtraActionLib.c | 167 ++-
> > > .../DebugPeCoffExtraActionLib.inf | 7 +
> > > BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
> > > MdePkg/Include/Pi/PiFirmwareFile.h | 4 +
> > > StandaloneMmPkg/Core/Dependency.c | 389
> +++++++
> > > StandaloneMmPkg/Core/Dispatcher.c | 1071
> > > ++++++++++++++++++++
> > > StandaloneMmPkg/Core/FwVol.c | 104
> ++
> > > StandaloneMmPkg/Core/Handle.c | 533
> > > ++++++++++
> > > StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
> > > StandaloneMmPkg/Core/Locate.c | 496
> > > +++++++++
> > > StandaloneMmPkg/Core/Mmi.c | 33
> 7 ++++++
> > > StandaloneMmPkg/Core/Notify.c | 203
> ++++
> > > StandaloneMmPkg/Core/Page.c | 384
> +++++++
> > > StandaloneMmPkg/Core/Pool.c | 287
> ++++++
> > > StandaloneMmPkg/Core/StandaloneMmCore.c | 708
> > > +++++++++++++
> > > StandaloneMmPkg/Core/StandaloneMmCore.h | 903
> > > +++++++++++++++++
> > > StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
> > > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231
> +++++
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 225
> ++++
> > > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
> > > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
> > > StandaloneMmPkg/Include/Guid/MmCoreData.h | 132
> +++
> > > StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
> > > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
> > > StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
> > > .../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
> > > StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
> > > StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
> > > .../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
> > > .../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
> > > StandaloneMmPkg/Include/StandaloneMm.h | 36 +
> > > StandaloneMmPkg/Library/FvLib/FvLib.c | 366
> +++++++
> > > StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
> > > StandaloneMmPkg/Library/HobLib/HobLib.c | 697
> > > +++++++++++++
> > > StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
> > > StandaloneMmPkg/Library/MemLib/MemLib.c | 276
> +++++
> > > StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
> > > .../MemoryAllocationLib/MemoryAllocationLib.c | 901
> > > ++++++++++++++++
> > > .../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
> > > .../MemoryAllocationLib/MemoryAllocationServices.h | 117 +++
> > > .../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
> > > .../Arm/SetPermissions.c | 278
> +++++
> > > .../Arm/StandaloneMmCoreEntryPoint.c | 265
> +++++
> > > .../StandaloneMmCoreEntryPoint.inf | 53 +
> > > .../StandaloneMmDriverEntryPoint.c | 102 ++
> > > .../StandaloneMmDriverEntryPoint.inf | 41 +
> > > StandaloneMmPkg/StandaloneMmPkg.dec | 47
> +
> > > StandaloneMmPkg/StandaloneMmPkg.dsc | 132
> +++
> > > StandaloneMmPkg/StandaloneMmPkg.fdf | 184
> ++++
> > > 55 files changed, 11699 insertions(+), 11 deletions(-)
> > > create mode 100644
> ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
> > > create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
> > > create mode 100644 StandaloneMmPkg/Core/Dependency.c
> > > create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
> > > create mode 100644 StandaloneMmPkg/Core/FwVol.c
> > > create mode 100644 StandaloneMmPkg/Core/Handle.c
> > > create mode 100644
> > > StandaloneMmPkg/Core/InstallConfigurationTable.c
> > > create mode 100644 StandaloneMmPkg/Core/Locate.c
> > > create mode 100644 StandaloneMmPkg/Core/Mmi.c
> > > create mode 100644 StandaloneMmPkg/Core/Notify.c
> > > create mode 100644 StandaloneMmPkg/Core/Page.c
> > > create mode 100644 StandaloneMmPkg/Core/Pool.c
> > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
> > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
> > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
> > > create mode 100644
> > > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
> > > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
> > > create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
> > > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
> > > create mode 100644
> > > StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
> > > create mode 100644
> > >
> StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
> > > create mode 100644
> StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
> > > create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
> > > create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
> > > create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
> > > create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
> > > create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
> > > create mode 100644
> > > StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
> > > create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
> > > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
> > > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
> > > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.c
> > > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
> > > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.c
> > > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
> > > create mode 100644
> > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
> > > create mode 100644
> > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.in
> > > f
> > > create mode 100644
> > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationServic
> > > e
> > > s.h
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobLis
> > > t.c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissio
> > > ns.
> > > c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMm
> > > CoreEntryPoint.c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCore
> > > E
> > > ntryPoint.inf
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > > iv
> > > erEntryPoint.c
> > > create mode 100644
> > >
> StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > > iv
> > > erEntryPoint.inf
> > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
> > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
> > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
> > >
> > > --
> > > 2.14.1
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
2018-04-06 14:55 ` Supreeth Venkatesh
@ 2018-04-08 5:28 ` Yao, Jiewen
0 siblings, 0 replies; 10+ messages in thread
From: Yao, Jiewen @ 2018-04-08 5:28 UTC (permalink / raw)
To: Supreeth Venkatesh, edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, Achin Gupta
Many thanks. The new series patch looks much better.
Some comments on the new patches.
> -----Original Message-----
> From: Supreeth Venkatesh [mailto:Supreeth.Venkatesh@arm.com]
> Sent: Friday, April 6, 2018 10:55 PM
> To: Yao, Jiewen <jiewen.yao@intel.com>; edk2-devel@lists.01.org
> Cc: leif.lindholm@linaro.org; Achin Gupta <Achin.Gupta@arm.com>
> Subject: RE: [edk2] [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
>
> Jiewen,
>
> My response inline for some of the comments.
> I have posted new series of patches. Please review them and provide feedback.
>
> Thanks,
> Supreeth
>
> -----Original Message-----
> From: Yao, Jiewen <jiewen.yao@intel.com>
> Sent: Monday, December 4, 2017 12:36 AM
> To: Supreeth Venkatesh <Supreeth.Venkatesh@arm.com>;
> edk2-devel@lists.01.org
> Cc: leif.lindholm@linaro.org
> Subject: RE: [edk2] [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
>
> Thanks you very much.
>
> Thanks for your patient. I have reviewed https://github.com/supven01/edk2.git
> (Branch: AArch64StandaloneMm)
>
> Below is my thougth:
> 1) I do not have comment for ArmPkg related change. - I expect Arm expert can
> review that.
>
> 2) For "BaseTools/AutoGen: Update header file for MM modules."
> I agree with you on that. (Reviewed-by: Jiewen.yao@intel.com) Would you
> please send separate patch for BaseTools owner to review?
> [Supreeth] already Merged.
>
> 3) For "MdePkg/Include: Add management mode FV file type and depex."
> I agree with you on that. (Reviewed-by: Jiewen.yao@intel.com) Would you
> please send separate patch for MdePkg owner to review?
> [Supreeth] Posted Patch. Maintainers waiting on StandaloneMmPkg changes to
> be merged.
>
> 4) For "MdeModulePkg: Add application to test MM communication protocol."
> Can we put UefiInfoApp to StandaloneMmPkg?
> The gMmUefiInfoGuid is consumed by
> StandaloneMmPkg\Core\StandaloneMmCore.c, so I believe it more tights to
> StandaloneMmPkg.
> I do not want to bother MdeModulePkg on that.
> [Supreeth] Modified. Done.
>
> 5) The rest are all StandaloneMmPkg.
> 5.1) For "StandaloneMmPkg: Add an AArch64 specific entry point library."
> This seems not a generic lib.
> Can we rename it to be: StandaloneMmCoreEntryPointArm?
> If so, we do not need create Arm sub-folder there.
> [Supreeth] I created an Arm sub-folder so that it can be extensible to other
> architectures, if some other architecture wants to reuse this ARM Specific library
> and extend it.
> Also, In the inf file, Arm specific source files are under [Sources.AARCH64]. Let
> me know if you prefer renaming as opposed to creating a sub folder.
>
> 5.2) For "StandaloneMmPkg/HobLib: Add a common HOB Library for
> management mode."
> This seems not a generic way to get the Hob.
>
> Below API seems private one. It is not defined in HobLib. But a contract between
> StandaloneMmPkg\Library\StandaloneMmCoreEntryPoint\Arm\CreateHobList.c
> and StandaloneMmPkg\Library\HobLib\HobLib.c
>
> EFI_HOB_HANDOFF_INFO_TABLE*
> HobConstructor (
> IN VOID *EfiMemoryBegin,
> IN UINTN EfiMemoryLength,
> IN VOID *EfiFreeMemoryBottom,
> IN VOID *EfiFreeMemoryTop
> )
>
> This is typically not encourage. I am not sure if we have better way to resolve the
> issue.
> But if there is not, I prefer we move it to be ArmSpecific HobLib, such as
> HobLibArmStandaloneMm.
> [Supreeth] For the moment, I don’t have a better way. I have made it Arm
> specific by creating a subfolder "Arm" and sources in inf file under
> [Sources.AARCH64].
>
> 5.3) For "StandaloneMmPkg/FvLib: Add a common FV Library for management
> mode."
> Looks good.
>
> 5.4) For "StandaloneMmPkg/MemLib: Instance of memory check library."
> It seems a compatibility issue, that we rename SmmMemLib to MmMemLib.
>
> Maybe, we can add MmMemLib.h API, and move SmmMemLib content to
> MmMemLib, then let SmmMemLib call MmMemLib.
> [Supreeth] MmMemLib differs significantly from SmmMemLib as SmmMemLib
> has some intel specific physical address bits, some memory map references.
> So I have moved this as ARM specific library at this point with scope for
> refactoring.
>
> 5.5) For "StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation
> library."
> May I know why you change " gSmst->SmmAllocatePool ();" to
> "MmAllocatePool ();"
>
> An MM driver should not know the detail implementation of MmCore.
>
> Can we just use gMmst->MmAllocatePool() here?
> [Supreeth] I modified it to use gMmst->MmXXXXXXXXX() Apis.
>
> 5.6) For "StandaloneMmPkg: MM driver entry point library."
> Looks good.
>
> 5.7) For "StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM
> Platforms."
> It seems Arm specific. Can we rename to ArmCpuMm?
> [Supreeth] I created an Arm sub-folder within CpuMm so that it can be
> extensible to other architectures, if some other architecture wants to reuse this
> ARM Specific cpu mm driver and extend it.
> Also, in DSC file, this is included under [Components.AARCH64] . Let me know if
> you prefer renaming as opposed to creating a sub folder.
>
> 5.8) For "StandaloneMmPkg/Core: Implementation of Standalone MM Core
> Module."
> I have not gone through all detail.
> It seems quite similar to my previous one. So it is good.
>
> 5.9) For "StandaloneMmPkg: Add handler to handle event received from
> "uefiinfo"."
> Looks good.
>
>
> Thank you
> Yao Jiewen
>
> > -----Original Message-----
> > From: edk2-devel [mailto:edk2-devel-bounces@lists.01.org] On Behalf Of
> > Supreeth Venkatesh
> > Sent: Friday, December 1, 2017 6:55 AM
> > To: Yao, Jiewen <jiewen.yao@intel.com>; edk2-devel@lists.01.org
> > Cc: leif.lindholm@linaro.org
> > Subject: Re: [edk2] [RFC v1 00/15] *** Proposal for StandaloneMmPkg
> > ***
> >
> > On Tue, 2017-11-28 at 07:00 +0000, Yao, Jiewen wrote:
> > > HI
> > > I am sorry that I missed this mail before.
> > >
> > > I found only 0/15 and 13/15 are in my mail box. :-( I do not know
> > > why others are filtered.
> > This was deliberate as PATCH 13/15 implements MM core code.
> > Rest of them are/were AARCH64 Specific excluding the MM libraries.
> > >
> > > Is that possible to post the whole patch to your private git?
> > > As such, we can review it in more efficient way.
> > I have created a github repo below to review it in more efficient way.
> >
> > EDK2
> > https://github.com/supven01/edk2.git
> > (Branch: AArch64StandaloneMm)
> >
> > EDK2-PLATFORMS
> > https://github.com/supven01/edk2-platforms.git
> > (Branch: master)
> >
> > Also, we are in the process of updating these changes into edk2
> > Staging repository here:
> > https://github.com/tianocore/edk2-staging/tree/AArch64StandaloneMm
> >
> > I will send out PATCH set once you/team completes the review and give
> > feedback/comments.
> >
> > >
> > > Basically, I think it is a good idea to have StandaloneMmPkg to hold
> > > all these features.
> > Thank you for acknowledging this.
> >
> > >
> > > Thank you
> > > Yao Jiewen
> > >
> > > >
> > > > -----Original Message-----
> > > > From: Supreeth Venkatesh [mailto:supreeth.venkatesh@arm.com]
> > > > Sent: Saturday, November 18, 2017 7:08 AM
> > > > To: edk2-devel@lists.01.org
> > > > Cc: leif.lindholm@linaro.org; Yao, Jiewen <jiewen.yao@intel.com>;
> > > > Supreeth Venkatesh <supreeth.venkatesh@arm.com>
> > > > Subject: [RFC v1 00/15] *** Proposal for StandaloneMmPkg ***
> > > >
> > > > ***
> > > > PI Specification v1.5 "Volume 4: Management Mode Core Interface"
> > > > introduces the concept of MM Standalone Mode. Initialization of
> > > > this mode can be done during the SEC phase (Section 1.5.2).
> > > > On ARMv8-A systems, ARM Trusted Firmware is responsible for
> > > > launching the normal world firmware e.g. UEFI.
> > > >
> > > > The Standalone MM environment is instantiated in Secure EL0 as a
> > > > separate firmware volume. It executes as BL32 Image under control
> > > > of ARM TF which is instantiated in EL3. Both components execute in
> > > > the
> > > > AArch64 execution
> > > > state.
> > > > This patchset will build upon the StandaloneSmmPkg module
> > > > originally contributed by Intel.
> > > >
> > > > This package can be used in conjunction with ARM Trusted Firmware
> > > > to recreate a simple MM secure environment that demonstrates
> > > > communication between two UEFI images where one is executing in
> > > > the normal world and the other is executing in the secure world.
> > > >
> > > > The normal world image includes:
> > > > MM Communication DXE runtime driver that implements the protocol
> > > > for communication with the MM environment in the secure world.
> > > >
> > > > The secure world image includes:
> > > > The MM Standalone framework.
> > > >
> > > > This RFC patchset includes the proposed organization/structure and
> > > > has architecture agnostic core changes only as a first pass.
> > > > Once the organization/structure have been agreed upon, patchset
> > > > for supporting libraries and AARCH64 implementation will be sent.
> > > >
> > > > Steps to build MM Standalone images In user preferred "work"
> > > > directory, execute the following shell commands
> > > >
> > > > git clone https://github.com/tianocore/edk2.git
> > > > git checkout master
> > > >
> > > > git clone https://github.com/tianocore/edk2-platforms.git
> > > > git checkout master
> > > >
> > > > mkdir arm-tf
> > > > cd arm-tf
> > > > git clone https://github.com/ARM-software/arm-trusted-firmware.git
> > > > .
> > > > git checkout master
> > > > cd ..
> > > >
> > > > git clone https://git.linaro.org/uefi/uefi-tools.git .
> > > > git checkout master
> > > >
> > > > The following will build the MM Standalone image which runs in
> > > > secure world.
> > > > ./uefi-tools/edk2-build.sh -b DEBUG fvp_mm_standalone
> > > >
> > > > The follwing will build the normal world UEFI image, ARM Trusted
> > > > Firmware and a Firmware Image Package (FIP) that includes both the
> > > > UEFI images.
> > > > ./uefi-tools/edk2-build.sh -a ./arm-tf -b DEBUG fvp_mm_normal
> > > >
> > > > Boot Loader Stage 1 (BL1) binary and combined arm-tf/uefi firmware
> > > > image package (fip) binary will be generated at:
> > > >
> > > > Build Output
> > > > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/bl1.bin
> > > > Build/ArmVExpress-FVP-AArch64-MM-Normal/DEBUG_GCC5/FV/fip.bin
> > > >
> > > > Steps to run MM Standalone image
> > > > 1. Download the ARMv8 Architecture FVP from
> > > >
> > > > https://silver.arm.com/download/download.tm?pv=3744408&p=1424570
> > > > For more information, please refer
> > > >
> > > > https://developer.arm.com/products/system-design/fixed-virtual-pla
> > > > t
> > > > forms
> > > > 2. Install FVP into preferred "work" directory.
> > > > 3. Create a shell script "run_mm.sh" in the same folder where
> > > > "FVP_Base_AEMv8A-AEMv8A" is present.
> > > > Sample Shell script below:
> > > > ./FVP_Base_AEMv8A-AEMv8A
> > > > -C cache_state_modelled=0
> > > > -C bp.secure_memory=1
> > > > -C bp.tzc_400.diagnostics=1
> > > > -C bp.pl011_uart0.untimed_fifos=0
> > > > -C cluster1.NUM_CORES=4
> > > > -C cluster0.NUM_CORES=4
> > > > -C bp.pl011_uart0.out_file=uart0.output
> > > > -C bp.pl011_uart1.out_file=uart1.output
> > > > -C bp.pl011_uart2.out_file=uart2.output
> > > > -C bp.pl011_uart3.out_file=uart3.output
> > > > -C bp.secureflashloader.fname=""
> > > > -C bp.flashloader0.fname=""
> > > > -S -R
> > > > 4. ./run_mm.sh
> > > > 5. Output can be seen on FVP console.
> > > > 6. The normal world will boot to the UEFI shell.
> > > >
> > > > Sample Output
> > > >
> > > > MM Standalone Output (FVP UART2)
> > > > SPM Version: Major=0x0, Minor=0x1
> > > > NumSpMemRegions - 0x6
> > > > SpMemBase - 0xFF200000
> > > > SpMemLimit - 0x100000000
> > > > SpImageBase - 0xFF200000
> > > > SpStackBase - 0xFF610000
> > > > SpHeapBase - 0xFF620000
> > > > SpNsCommBufBase - 0xFF600000
> > > > SpSharedBufBase - 0xFF500000
> > > > SpImageSize - 0x300000
> > > > SpPcpuStackSize - 0x2000
> > > > SpHeapSize - 0x9E0000
> > > > SpNsCommBufSize - 0x10000
> > > > SpPcpuSharedBufSize - 0x20000
> > > > NumCpus - 0x8
> > > > CpuInfo - 0xFF500680
> > > > Mpidr - 0x80000000
> > > > LinearId - 0x0
> > > > Flags - 0x1
> > > > Mpidr - 0x80000001
> > > > LinearId - 0x1
> > > > Flags - 0x0
> > > > Mpidr - 0x80000002
> > > > LinearId - 0x2
> > > > Flags - 0x0
> > > > Mpidr - 0x80000003
> > > > LinearId - 0x3
> > > > Flags - 0x0
> > > > Mpidr - 0x80000100
> > > > LinearId - 0x4
> > > > Flags - 0x0
> > > > Mpidr - 0x80000101
> > > > LinearId - 0x5
> > > > Flags - 0x0
> > > > Mpidr - 0x80000102
> > > > LinearId - 0x6
> > > > Flags - 0x0
> > > > Mpidr - 0x80000103
> > > > LinearId - 0x7
> > > > Flags - 0x0
> > > > Found Standalone MM PE data - 0xFF201000 Found Standalone MM PE
> > > > data - 0xFF201000 Standalone MM Core PE-COFF SectionHeaderOffset -
> > > > 0xF60, NumberOfSections
> > > > - 3
> > > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > > 0xFF201000 has
> > > > 0x60000020 permissions
> > > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > > 0xFF201000
> > > > has .et name
> > > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > > 0xFF201000 has
> > > > 0xFF202000 address
> > > > UpdateMmFoundationPeCoffPermissions: Section 0 of image at
> > > > 0xFF201000 has
> > > > 0x1000 data
> > > > UpdateMmFoundationPeCoffPermissions: Ignoring section 0 of image
> > > > at
> > > > 0xFF201000 with 0x60000020 permissions
> > > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > > 0xFF201000 has
> > > > 0xC0000040 permissions
> > > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > > 0xFF201000
> > > > has .aa name
> > > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > > 0xFF201000 has
> > > > 0xFF217000 address
> > > > UpdateMmFoundationPeCoffPermissions: Section 1 of image at
> > > > 0xFF201000 has
> > > > 0x16000 data
> > > > UpdateMmFoundationPeCoffPermissions: Mapping section 1 of image at
> > > > 0xFF201000 with RW-XN permissions
> > > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > > 0xFF201000 has
> > > > 0x42000040 permissions
> > > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > > 0xFF201000
> > > > has .eo name
> > > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > > 0xFF201000 has
> > > > 0xFF218000 address
> > > > UpdateMmFoundationPeCoffPermissions: Section 2 of image at
> > > > 0xFF201000 has
> > > > 0x17000 data
> > > > UpdateMmFoundationPeCoffPermissions: Mapping section 2 of image at
> > > > 0xFF201000 with RO-XN permissions
> > > > StandaloneMmCoreMemoryAllocationLibConstructor - 0xFF620000
> > > > MmramRangeCount - 0x6
> > > > MmramRanges[0]: 0x00000000FF200000 - 0x0000000000300000
> > > > MmramRanges[1]: 0x00000000FF500000 - 0x0000000000100000
> > > > MmramRanges[2]: 0x00000000FF600000 - 0x0000000000010000
> > > > MmramRanges[3]: 0x00000000FF610000 - 0x0000000000010000
> > > > MmramRanges[4]: 0x00000000FF620000 - 0x00000000000002C8
> > > > MmramRanges[5]: 0x00000000FF6202C8 - 0x00000000009DFD38
> > > > MmInitializeMemoryServices MmAddMemoryRegion 0 :
> > > > 0x00000000FF200000 - 0x0000000000300000 MmAddMemoryRegion 1 :
> > > > 0x00000000FF500000 - 0x0000000000100000 MmAddMemoryRegion 2 :
> > > > 0x00000000FF600000 - 0x0000000000010000 MmAddMemoryRegion 3 :
> > > > 0x00000000FF610000 - 0x0000000000010000 MmAddMemoryRegion 4 :
> > > > 0x00000000FF620000 - 0x00000000000002C8 MmAddMemoryRegion 5 :
> > > > 0x00000000FF6202C8 - 0x00000000009DFD38
> > > > mMmMemLibInternalMaximumSupportAddress = 0xFFFFFFFFF MmMain -
> > > > 0xFF620000 MmramRangeCount - 0x6
> > > > MmramRanges[0]: 0x00000000FF200000 - 0x300000
> > > > MmramRanges[1]: 0x00000000FF500000 - 0x100000
> > > > MmramRanges[2]: 0x00000000FF600000 - 0x10000
> > > > MmramRanges[3]: 0x00000000FF610000 - 0x10000
> > > > MmramRanges[4]: 0x00000000FF620000 - 0x2C8
> > > > MmramRanges[5]: 0x00000000FF6202C8 - 0x9DFD38
> mMmramRangeCount -
> > > > 0x6 mMmramRanges - 0xFFFFEE10 BFV address - 0xFF200000 BFV size
> > > > - 0x300000 MmInstallConfigurationTable For HobList HobSize - 0x2C8
> > > > MmHobStart - 0xFFFFE810 MmRegisterProtocolNotify -
> > > > MmConfigurationMmProtocol Mm Dispatch StandaloneBfvAddress -
> > > > 0xFF200000 MmCoreFfsFindMmDriver - 0xFF200000 FvIsBeingProcesssed
> > > > - 0xFF200000 Check MmFileTypes - 0xA Check MmFileTypes - 0xE Find
> > > > PE data - 0xFF219024 MmAddToDriverList -
> > > > 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > > (0xFF219024)
> > > > MmDispatcher
> > > > Drain the Scheduled Queue
> > > > Search DriverList for items to place on Scheduled Queue
> > > > DriverEntry (Discovered) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > > Evaluate MM DEPEX for FFS(58F7A62B-6280-42A7-BC38-10535A64A92C)
> > > > TRUE
> > > > END
> > > > RESULT = TRUE
> > > > Drain the Scheduled Queue
> > > > DriverEntry (Scheduled) - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > > MmLoadImage - 58F7A62B-6280-42A7-BC38-10535A64A92C
> > > > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > > > with RO-XN permissions and size 0x7000
> > > > UpdatePeCoffPermissions: Mapping section 0 of image at 0xFFFE7000
> > > > with RO-X permissions and size 0x7000
> > > > UpdatePeCoffPermissions: Mapping section 1 of image at 0xFFFEE000
> > > > with RW-XN permissions and size 0x1000
> > > > UpdatePeCoffPermissions: Mapping section 2 of image at 0xFFFEF000
> > > > with RO-XN permissions and size 0x1000 add-symbol-file
> > > >
> >
> /home/supven01/work/mm_upstream/Build/StandaloneMmPkg/DEBUG_GCC5
> > > >
> >
> /AARCH64/StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpu
> > > > Driver/DEBUG/PiMmStandloneArmTfCpuDriver.dll 0xFFFE7000 Loading
> MM
> > > > driver at 0x000FFFE6000 EntryPoint=0x000FFFE7000
> > > > PiMmStandloneArmTfCpuDriver.efi StartImage - 0xFFFE7000
> > > > (Standalone Mode)
> > > > MmInstallProtocolInterface: 26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7
> > > > FFFEE008
> > > > MmConfigurationMmNotify(26EEB3DE-B689-492E-80F0-BE8BD7DA4BA7)
> -
> > > > FFFEE008
> > > > MM Core registered MM Entry Point address FF2041C0
> > > > MmInstallProtocolInterface: EB346B97-975F-4A9F-8B22-F8E92BB3D569
> > > > FFFEE018
> > > > Sharing Cpu Driver EP *0xFF217280 = 0xFFFE798C
> > > > mNsCommBuffer.PhysicalStart - 0xFF600000
> > > > mNsCommBuffer.PhysicalSize - 0x10000
> > > > mNsCommBuffer: 0x00000000FF600000 - 0x10000
> > > > mMpInformationHobData: 0x0000000000000008 - 0x8
> > > > mMpInformationHobData[0x80000000]: 0, 0, 0
> > > > mMpInformationHobData[0x80000001]: 0, 1, 1
> > > > mMpInformationHobData[0x80000002]: 0, 2, 2
> > > > mMpInformationHobData[0x80000003]: 0, 3, 3
> > > > mMpInformationHobData[0x80000100]: 1, 0, 0
> > > > mMpInformationHobData[0x80000101]: 1, 1, 1
> > > > mMpInformationHobData[0x80000102]: 1, 2, 2
> > > > mMpInformationHobData[0x80000103]: 1, 3, 3 MmiHandlerRegister -
> > > > GUID B65694CC-09E3-4C3B-B5CD-05F44D3CDBFF - Status 0
> > > > MmiHandlerRegister - GUID 7081E22F-CAC6-4053-9468-675782CF88E5 -
> > > > Status 0 MmiHandlerRegister - GUID
> > > > 60FF8964-E906-41D0-AFED-F241E974E08E - Status
> > > > 0
> > > > MmiHandlerRegister - GUID 02CE967A-DD7E-4FFC-9EE7-810CF0470880 -
> > > > Status 0 MmiHandlerRegister - GUID
> > > > 2A571201-4966-47F6-8B86-F31E41F32F10 - Status
> > > > 0
> > > > MmiHandlerRegister - GUID 27ABF055-B1B8-4C26-8048-748F37BAA2DF -
> > > > Status 0 MmiHandlerRegister - GUID
> > > > 7CE88FB3-4BD7-4679-87A8-A8D8DEE50D2B - Status 0 MmMain Done!
> > > > Shared Cpu Driver EP 0xFFFE798C
> > > >
> > > > ARM TF (FVP UART0)
> > > > NOTICE: Booting Trusted Firmware
> > > > NOTICE: BL1: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > > NOTICE: BL1: Built : 16:14:26, Nov 1 2017
> > > > INFO: BL1: RAM 0x4036000 - 0x403c000
> > > > INFO: BL1: Loading BL2
> > > > INFO: Loading image id=1 at address 0x4027000
> > > > INFO: Image id=1 loaded: 0x4027000 - 0x402c2a8
> > > > NOTICE: BL1: Booting BL2
> > > > INFO: Entry point address = 0x4027000
> > > > INFO: SPSR = 0x3c5
> > > > NOTICE: BL2: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > > NOTICE: BL2: Built : 16:14:26, Nov 1 2017
> > > > INFO: BL2: Doing platform setup
> > > > INFO: Configuring TrustZone Controller
> > > > INFO: BL2: Loading image id 3
> > > > INFO: Loading image id=3 at address 0xff000000
> > > > INFO: Image id=3 loaded: 0xff000000 - 0xff00c230
> > > > INFO: BL2: Loading image id 4
> > > > INFO: Loading image id=4 at address 0xff200000
> > > > INFO: Image id=4 loaded: 0xff200000 - 0xff480000
> > > > INFO: BL2: Loading image id 5
> > > > INFO: Loading image id=5 at address 0x88000000
> > > > INFO: Image id=5 loaded: 0x88000000 - 0x88280000
> > > > NOTICE: BL1: Booting BL31
> > > > INFO: Entry point address = 0xff000000
> > > > INFO: SPSR = 0x3cd
> > > > NOTICE: BL31: v1.4(debug):v1.4-96-gae48aad7-dirty
> > > > NOTICE: BL31: Built : 16:14:26, Nov 1 2017
> > > > INFO: GICv3 with legacy support detected. ARM GICV3 driver
> > > > initialized in
> > > > EL3
> > > > INFO: BL31: Initializing runtime services
> > > > INFO: BL31: Initializing BL32
> > > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > > NOTICE: Start address : 0xff217000
> > > > NOTICE: Number of pages: 1 (4096 bytes)
> > > > NOTICE: Attributes : 0x7
> > > > NOTICE: (Equivalent TF attributes: 0x22)
> > > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > > NOTICE: Start address : 0xff217000
> > > > NOTICE: Number of pages: 1 (4096 bytes)
> > > > NOTICE: Attributes : 0x5
> > > > NOTICE: (Equivalent TF attributes: 0x2a)
> > > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > > NOTICE: Start address : 0xff218000
> > > > NOTICE: Number of pages: 1 (4096 bytes)
> > > > NOTICE: Attributes : 0x7
> > > > NOTICE: (Equivalent TF attributes: 0x22)
> > > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > > NOTICE: Start address : 0xfffe7000
> > > > NOTICE: Number of pages: 7 (28672 bytes)
> > > > NOTICE: Attributes : 0x7
> > > > NOTICE: (Equivalent TF attributes: 0x22)
> > > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > > NOTICE: Start address : 0xfffe7000
> > > > NOTICE: Number of pages: 7 (28672 bytes)
> > > > NOTICE: Attributes : 0x3
> > > > NOTICE: (Equivalent TF attributes: 0x2)
> > > > NOTICE: Received SPM_MEMORY_ATTRIBUTES_SET SMC
> > > > NOTICE: Start address : 0xfffef000
> > > > NOTICE: Number of pages: 1 (4096 bytes)
> > > > NOTICE: Attributes : 0x7
> > > > NOTICE: (Equivalent TF attributes: 0x22)
> > > > INFO: BL31: Preparing for EL3 exit to normal world
> > > > INFO: Entry point address = 0x88000000
> > > > INFO: SPSR = 0x3c9
> > > > UEFI firmware (version built at 16:14:14 on Nov 1 2017)
> > > >
> > > > ***
> > > >
> > > > Supreeth Venkatesh (15):
> > > > ArmPkg/Include: Add MM interface SVC return codes.
> > > > BaseTools/AutoGen: Update header file for MM modules.
> > > > ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
> > > > ArmPkg/ArmMmuLib: Add MMU library inf file suitable for use in
> > > > S- EL0.
> > > > MdePkg/Include: Add management mode FV file type and depex.
> > > > StandaloneMmPkg/StandaloneMmCoreEntryPoint: Add an AArch64
> > > > specific
> > > > entry point library.
> > > > StandaloneMmPkg/HobLib: Add a common HOB Library for
> management
> > > > mode.
> > > > StandaloneMmPkg/FvLib: Add a common FV Library for management
> > > > mode.
> > > > StandaloneMmPkg/MemLib: Instance of management mode memory
> > check
> > > > library.
> > > > StandaloneMmPkg/MemoryAllocationLib: Add MM memory allocation
> > > > library.
> > > > StandaloneMmPkg/StandaloneMmDriverEntryPoint: MM driver entry
> > > > point
> > > > library.
> > > > StandaloneMmPkg/CpuMm: Add CPU driver suitable for ARM Standard
> > > > Platforms.
> > > > StandaloneMmPkg/Core: Implementation of Standalone MM Core
> > > > Module.
> > > > StandaloneMmPkg: Describe the package declaration, definition
> > > > and fdf
> > > > files.
> > > > ArmPkg/DebugPeCoffExtraActionLib: Add UpdatePeCoffPermissions
> > > > for
> > > > S-ELO MM.
> > > >
> > > > ArmPkg/Include/IndustryStandard/ArmMmSvc.h | 9 +-
> > > > ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c | 146
> > +++
> > > > ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf | 37 +
> > > > .../DebugPeCoffExtraActionLib.c | 167 ++-
> > > > .../DebugPeCoffExtraActionLib.inf | 7 +
> > > > BaseTools/Source/Python/AutoGen/GenC.py | 16 +-
> > > > MdePkg/Include/Pi/PiFirmwareFile.h | 4 +
> > > > StandaloneMmPkg/Core/Dependency.c | 389
> > +++++++
> > > > StandaloneMmPkg/Core/Dispatcher.c | 1071
> > > > ++++++++++++++++++++
> > > > StandaloneMmPkg/Core/FwVol.c | 104
> > ++
> > > > StandaloneMmPkg/Core/Handle.c | 533
> > > > ++++++++++
> > > > StandaloneMmPkg/Core/InstallConfigurationTable.c | 178 ++++
> > > > StandaloneMmPkg/Core/Locate.c | 496
> > > > +++++++++
> > > > StandaloneMmPkg/Core/Mmi.c | 33
> > 7 ++++++
> > > > StandaloneMmPkg/Core/Notify.c | 203
> > ++++
> > > > StandaloneMmPkg/Core/Page.c | 384
> > +++++++
> > > > StandaloneMmPkg/Core/Pool.c | 287
> > ++++++
> > > > StandaloneMmPkg/Core/StandaloneMmCore.c | 708
> > > > +++++++++++++
> > > > StandaloneMmPkg/Core/StandaloneMmCore.h | 903
> > > > +++++++++++++++++
> > > > StandaloneMmPkg/Core/StandaloneMmCore.inf | 80 ++
> > > > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h | 66 ++
> > > > StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S | 33 +
> > > > StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c | 231
> > +++++
> > > > StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c | 225
> > ++++
> > > > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h | 89 ++
> > > > .../CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf | 60 ++
> > > > StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c | 51 +
> > > > StandaloneMmPkg/Include/Guid/MmCoreData.h | 132
> > +++
> > > > StandaloneMmPkg/Include/Guid/MmFvDispatch.h | 38 +
> > > > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h | 62 ++
> > > > StandaloneMmPkg/Include/Guid/MpInformation.h | 41 +
> > > > .../Library/Arm/StandaloneMmCoreEntryPoint.h | 232 +++++
> > > > StandaloneMmPkg/Include/Library/FvLib.h | 109 ++
> > > > StandaloneMmPkg/Include/Library/MemLib.h | 140 +++
> > > > .../Include/Library/MmCoreStandaloneEntryPoint.h | 101 ++
> > > > .../Include/Library/MmDriverStandaloneEntryPoint.h | 148 +++
> > > > StandaloneMmPkg/Include/StandaloneMm.h | 36 +
> > > > StandaloneMmPkg/Library/FvLib/FvLib.c | 366
> > +++++++
> > > > StandaloneMmPkg/Library/FvLib/FvLib.inf | 57 ++
> > > > StandaloneMmPkg/Library/HobLib/HobLib.c | 697
> > > > +++++++++++++
> > > > StandaloneMmPkg/Library/HobLib/HobLib.inf | 45 +
> > > > StandaloneMmPkg/Library/MemLib/MemLib.c | 276
> > +++++
> > > > StandaloneMmPkg/Library/MemLib/MemLib.inf | 47 +
> > > > .../MemoryAllocationLib/MemoryAllocationLib.c | 901
> > > > ++++++++++++++++
> > > > .../MemoryAllocationLib/MemoryAllocationLib.inf | 49 +
> > > > .../MemoryAllocationLib/MemoryAllocationServices.h | 117 +++
> > > > .../StandaloneMmCoreEntryPoint/Arm/CreateHobList.c | 200 ++++
> > > > .../Arm/SetPermissions.c | 278
> > +++++
> > > > .../Arm/StandaloneMmCoreEntryPoint.c | 265
> > +++++
> > > > .../StandaloneMmCoreEntryPoint.inf | 53 +
> > > > .../StandaloneMmDriverEntryPoint.c | 102 ++
> > > > .../StandaloneMmDriverEntryPoint.inf | 41 +
> > > > StandaloneMmPkg/StandaloneMmPkg.dec | 47
> > +
> > > > StandaloneMmPkg/StandaloneMmPkg.dsc | 132
> > +++
> > > > StandaloneMmPkg/StandaloneMmPkg.fdf | 184
> > ++++
> > > > 55 files changed, 11699 insertions(+), 11 deletions(-)
> > > > create mode 100644
> > ArmPkg/Library/ArmMmuLib/AArch64/ArmMmuSecLib.c
> > > > create mode 100644 ArmPkg/Library/ArmMmuLib/ArmMmuSecLib.inf
> > > > create mode 100644 StandaloneMmPkg/Core/Dependency.c
> > > > create mode 100644 StandaloneMmPkg/Core/Dispatcher.c
> > > > create mode 100644 StandaloneMmPkg/Core/FwVol.c
> > > > create mode 100644 StandaloneMmPkg/Core/Handle.c
> > > > create mode 100644
> > > > StandaloneMmPkg/Core/InstallConfigurationTable.c
> > > > create mode 100644 StandaloneMmPkg/Core/Locate.c
> > > > create mode 100644 StandaloneMmPkg/Core/Mmi.c
> > > > create mode 100644 StandaloneMmPkg/Core/Notify.c
> > > > create mode 100644 StandaloneMmPkg/Core/Page.c
> > > > create mode 100644 StandaloneMmPkg/Core/Pool.c
> > > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.c
> > > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.h
> > > > create mode 100644 StandaloneMmPkg/Core/StandaloneMmCore.inf
> > > > create mode 100644
> > > > StandaloneMmPkg/Core/StandaloneMmCorePrivateData.h
> > > > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Entry.S
> > > > create mode 100644
> > StandaloneMmPkg/Drivers/CpuMm/Arm/EventHandle.c
> > > > create mode 100644 StandaloneMmPkg/Drivers/CpuMm/Arm/Init.c
> > > > create mode 100644
> > > >
> StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.h
> > > > create mode 100644
> > > >
> > StandaloneMmPkg/Drivers/CpuMm/Arm/PiMmStandloneArmTfCpuDriver.inf
> > > > create mode 100644
> > StandaloneMmPkg/Drivers/CpuMm/Arm/StateSave.c
> > > > create mode 100644 StandaloneMmPkg/Include/Guid/MmCoreData.h
> > > > create mode 100644 StandaloneMmPkg/Include/Guid/MmFvDispatch.h
> > > > create mode 100644
> > > > StandaloneMmPkg/Include/Guid/MmramMemoryReserve.h
> > > > create mode 100644 StandaloneMmPkg/Include/Guid/MpInformation.h
> > > > create mode 100644
> > > > StandaloneMmPkg/Include/Library/Arm/StandaloneMmCoreEntryPoint.h
> > > > create mode 100644 StandaloneMmPkg/Include/Library/FvLib.h
> > > > create mode 100644 StandaloneMmPkg/Include/Library/MemLib.h
> > > > create mode 100644
> > > > StandaloneMmPkg/Include/Library/MmCoreStandaloneEntryPoint.h
> > > > create mode 100644
> > > > StandaloneMmPkg/Include/Library/MmDriverStandaloneEntryPoint.h
> > > > create mode 100644 StandaloneMmPkg/Include/StandaloneMm.h
> > > > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.c
> > > > create mode 100644 StandaloneMmPkg/Library/FvLib/FvLib.inf
> > > > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.c
> > > > create mode 100644 StandaloneMmPkg/Library/HobLib/HobLib.inf
> > > > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.c
> > > > create mode 100644 StandaloneMmPkg/Library/MemLib/MemLib.inf
> > > > create mode 100644
> > > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.c
> > > > create mode 100644
> > > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationLib.in
> > > > f
> > > > create mode 100644
> > > > StandaloneMmPkg/Library/MemoryAllocationLib/MemoryAllocationServic
> > > > e
> > > > s.h
> > > > create mode 100644
> > > >
> > StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/CreateHobLis
> > > > t.c
> > > > create mode 100644
> > > >
> > StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/SetPermissio
> > > > ns.
> > > > c
> > > > create mode 100644
> > > >
> >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/Arm/StandaloneMm
> > > > CoreEntryPoint.c
> > > > create mode 100644
> > > >
> >
> StandaloneMmPkg/Library/StandaloneMmCoreEntryPoint/StandaloneMmCore
> > > > E
> > > > ntryPoint.inf
> > > > create mode 100644
> > > >
> > StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > > > iv
> > > > erEntryPoint.c
> > > > create mode 100644
> > > >
> > StandaloneMmPkg/Library/StandaloneMmDriverEntryPoint/StandaloneMmDr
> > > > iv
> > > > erEntryPoint.inf
> > > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dec
> > > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.dsc
> > > > create mode 100644 StandaloneMmPkg/StandaloneMmPkg.fdf
> > > >
> > > > --
> > > > 2.14.1
> > _______________________________________________
> > edk2-devel mailing list
> > edk2-devel@lists.01.org
> > https://lists.01.org/mailman/listinfo/edk2-devel
> IMPORTANT NOTICE: The contents of this email and any attachments are
> confidential and may also be privileged. If you are not the intended recipient,
> please notify the sender immediately and do not disclose the contents to any
> other person, use it for any purpose, or store or copy the information in any
> medium. Thank you.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2018-04-08 5:28 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-11-17 23:07 [RFC v1 00/15] *** Proposal for StandaloneMmPkg *** Supreeth Venkatesh
2017-11-17 23:08 ` [RFC v1 13/15] StandaloneMmPkg/Core: Implementation of Standalone MM Core Module Supreeth Venkatesh
2017-11-18 20:10 ` [RFC v1 00/15] *** Proposal for StandaloneMmPkg *** Rebecca Cran
2017-11-20 15:49 ` Supreeth Venkatesh
2017-11-28 7:00 ` Yao, Jiewen
2017-11-30 22:54 ` Supreeth Venkatesh
2017-12-04 6:35 ` Yao, Jiewen
2017-12-04 15:56 ` Supreeth Venkatesh
2018-04-06 14:55 ` Supreeth Venkatesh
2018-04-08 5:28 ` Yao, Jiewen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox