public inbox for devel@edk2.groups.io
 help / color / mirror / Atom feed
From: "Bandaru, Purna Chandra Rao" <purna.chandra.rao.bandaru@intel.com>
To: devel@edk2.groups.io
Cc: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com>,
	Wu Hao A <hao.a.wu@intel.com>,
	Albecki Mateusz <mateusz.albecki@intel.com>,
	Liming Gao <gaoliming@byosoft.com.cn>,
	Zhiguang Liu <zhiguang.liu@intel.com>
Subject: [PATCH] [PATCH v2] MdeModulePkg: Add bRefClkFreq card attribute programming support
Date: Mon,  7 Mar 2022 17:17:26 +0530	[thread overview]
Message-ID: <1828e4b1d46a6ae53d275d374707909deba007d6.1646653492.git.purna.chandra.rao.bandaru@intel.com> (raw)

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3851

When the UFS card comes out of Manufacturer, bRefClkFreq attribute is set
to 1h on the UFS card as per the "MDV” (Manufacturer Default Value)
specified by the spec JESD220*. However, depends on the UFS host system
environment, it need to be set to correct value.

Reference Clock Frequency value
0h:19.2 MHz
1h: 26 MHz
2h: 38.4 MHz
3h: Obsolete
Others: Reserved

Cc: Wu Hao A <hao.a.wu@intel.com>
Cc: Albecki Mateusz <mateusz.albecki@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>

Signed-off-by: Purna Chandra Rao Bandaru <purna.chandra.rao.bandaru@intel.com>
---
 .../Bus/Ufs/UfsPassThruDxe/UfsPassThru.c      | 50 ++++++++++++++++++-
 .../Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c   | 10 +---
 .../Protocol/UfsHostControllerPlatform.h      | 15 +++++-
 3 files changed, 63 insertions(+), 12 deletions(-)

diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
index 4c2d6ae27f..638b14b0c1 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThru.c
@@ -1,6 +1,6 @@
 /** @file
 
-  Copyright (c) 2014 - 2021, Intel Corporation. All rights reserved.<BR>
+  Copyright (c) 2014 - 2022, Intel Corporation. All rights reserved.<BR>
   Copyright (c) Microsoft Corporation.<BR>
   SPDX-License-Identifier: BSD-2-Clause-Patent
 
@@ -843,6 +843,8 @@ UfsPassThruDriverBindingStart (
   UFS_DEV_DESC                        DeviceDescriptor;
   UINT32                              UnitDescriptorSize;
   UINT32                              DeviceDescriptorSize;
+  EDKII_UFS_CARD_REF_CLK_FREQ_ATTRIBUTE Attributes;
+  UINT8                               RefClkAttr;
 
   Status    = EFI_SUCCESS;
   UfsHc     = NULL;
@@ -916,6 +918,52 @@ UfsPassThruDriverBindingStart (
     DEBUG ((DEBUG_ERROR, "Ufs Host Controller Initialization Error, Status = %r\n", Status));
     goto Error;
   }
+  if ((mUfsHcPlatform != NULL) &&
+      ((mUfsHcPlatform->RefClkFreq == EdkiiUfsCardRefClkFreq19p2Mhz) ||
+       (mUfsHcPlatform->RefClkFreq == EdkiiUfsCardRefClkFreq26Mhz) ||
+       (mUfsHcPlatform->RefClkFreq == EdkiiUfsCardRefClkFreq38p4Mhz))) {
+    RefClkAttr = UfsAttrRefClkFreq;
+    Attributes = EdkiiUfsCardRefClkFreqObsolete;
+    Status = UfsRwAttributes (Private, TRUE, RefClkAttr, 0, 0, (UINT32 *) &Attributes);
+    if (!EFI_ERROR (Status)) {
+      if (Attributes != mUfsHcPlatform->RefClkFreq) {
+        Attributes = mUfsHcPlatform->RefClkFreq;
+        DEBUG (
+          (DEBUG_INFO,
+          "Setting bRefClkFreq attribute(%x) to %x\n  0 -> 19.2 Mhz\n  1 -> 26 Mhz\n  2 -> 38.4 Mhz\n  3 -> Obsolete\n",
+          RefClkAttr,
+          Attributes)
+          );
+        Status = UfsRwAttributes (Private, FALSE, RefClkAttr, 0, 0, (UINT32 *) &Attributes);
+        if (EFI_ERROR (Status)) {
+          DEBUG (
+            (DEBUG_ERROR,
+            "Failed to Change Reference Clock Attribute to %d, Status = %r \n",
+            mUfsHcPlatform->RefClkFreq,
+            Status)
+            );
+        }
+      }
+    } else {
+      DEBUG (
+        (DEBUG_ERROR,
+        "Failed to Read Reference Clock Attribute, Status = %r \n",
+        Status)
+        );
+    }
+  }
+
+  if ((mUfsHcPlatform != NULL) && (mUfsHcPlatform->Callback != NULL)) {
+    Status = mUfsHcPlatform->Callback (Private->Handle, EdkiiUfsHcPostLinkStartup, &Private->UfsHcDriverInterface);
+    if (EFI_ERROR (Status)) {
+      DEBUG (
+        (DEBUG_ERROR,
+        "Failure from platform driver during EdkiiUfsHcPostLinkStartup, Status = %r\n",
+        Status)
+        );
+      return Status;
+    }
+  }
 
   //
   // UFS 2.0 spec Section 13.1.3.3:
diff --git a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
index eba35cc669..4a9fa01e7d 100644
--- a/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
+++ b/MdeModulePkg/Bus/Ufs/UfsPassThruDxe/UfsPassThruHci.c
@@ -2,7 +2,7 @@
   UfsPassThruDxe driver is used to produce EFI_EXT_SCSI_PASS_THRU protocol interface
   for upper layer application to execute UFS-supported SCSI cmds.
 
-  Copyright (c) 2014 - 2019, Intel Corporation. All rights reserved.<BR>
+  Copyright (c) 2014 - 2022, Intel Corporation. All rights reserved.<BR>
   Copyright (c) Microsoft Corporation.<BR>
   SPDX-License-Identifier: BSD-2-Clause-Patent
 
@@ -1970,14 +1970,6 @@ UfsDeviceDetection (
         return EFI_DEVICE_ERROR;
       }
     } else {
-      if ((mUfsHcPlatform != NULL) && (mUfsHcPlatform->Callback != NULL)) {
-        Status = mUfsHcPlatform->Callback (Private->Handle, EdkiiUfsHcPostLinkStartup, &Private->UfsHcDriverInterface);
-        if (EFI_ERROR (Status)) {
-          DEBUG ((DEBUG_ERROR, "Failure from platform driver during EdkiiUfsHcPostLinkStartup, Status = %r\n", Status));
-          return Status;
-        }
-      }
-
       return EFI_SUCCESS;
     }
   }
diff --git a/MdeModulePkg/Include/Protocol/UfsHostControllerPlatform.h b/MdeModulePkg/Include/Protocol/UfsHostControllerPlatform.h
index faa82d0c4e..32e9f6488c 100644
--- a/MdeModulePkg/Include/Protocol/UfsHostControllerPlatform.h
+++ b/MdeModulePkg/Include/Protocol/UfsHostControllerPlatform.h
@@ -1,7 +1,7 @@
 /** @file
   EDKII_UFS_HC_PLATFORM_PROTOCOL definition.
 
-Copyright (c) 2019, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2019 - 2022, Intel Corporation. All rights reserved.<BR>
 SPDX-License-Identifier: BSD-2-Clause-Patent
 
 **/
@@ -11,7 +11,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
 
 #include <Protocol/UfsHostController.h>
 
-#define EDKII_UFS_HC_PLATFORM_PROTOCOL_VERSION  1
+#define EDKII_UFS_HC_PLATFORM_PROTOCOL_VERSION  2
 
 extern EFI_GUID  gEdkiiUfsHcPlatformProtocolGuid;
 
@@ -83,6 +83,13 @@ typedef enum {
   EdkiiUfsHcPostLinkStartup
 } EDKII_UFS_HC_PLATFORM_CALLBACK_PHASE;
 
+typedef enum {
+  EdkiiUfsCardRefClkFreq19p2Mhz,
+  EdkiiUfsCardRefClkFreq26Mhz,
+  EdkiiUfsCardRefClkFreq38p4Mhz,
+  EdkiiUfsCardRefClkFreqObsolete
+} EDKII_UFS_CARD_REF_CLK_FREQ_ATTRIBUTE;
+
 /**
   Callback function for platform driver.
 
@@ -118,6 +125,10 @@ struct _EDKII_UFS_HC_PLATFORM_PROTOCOL {
   /// for host controller.
   ///
   EDKII_UFS_HC_PLATFORM_CALLBACK            Callback;
+  ///
+  /// Reference Clock Frequency Ufs Card Attribute that need to be set in this Ufs Host Environment.
+  ///
+  EDKII_UFS_CARD_REF_CLK_FREQ_ATTRIBUTE     RefClkFreq;
 };
 
 #endif
-- 
2.31.1.windows.1


             reply	other threads:[~2022-03-07 11:47 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-07 11:47 Bandaru, Purna Chandra Rao [this message]
2022-03-08  5:25 ` [PATCH] [PATCH v2] MdeModulePkg: Add bRefClkFreq card attribute programming support Wu, Hao A

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-list from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1828e4b1d46a6ae53d275d374707909deba007d6.1646653492.git.purna.chandra.rao.bandaru@intel.com \
    --to=devel@edk2.groups.io \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox