[PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Sean Rhodes]

From: Matt DeVillier <matt.devillier@gmail.com>

Only enumerate devices that have media present.

Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: I78a0b8be3e2f33edce2d43bbdd7670e6174d0ff8
---
 MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c b/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
index 962892d38f..bde22fa659 100644
--- a/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
+++ b/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
@@ -2218,6 +2218,15 @@ BmEnumerateBootOptions (
         continue;
       }
 
+      //
+      // Skip removable media if not present
+      //
+      if ((BlkIo->Media->RemovableMedia == TRUE) &&
+          (BlkIo->Media->MediaPresent == FALSE))
+      {
+        continue;
+      }
+
       Description = BmGetBootDescription (Handles[Index]);
       BootOptions = ReallocatePool (
                       sizeof (EFI_BOOT_MANAGER_LOAD_OPTION) * (*BootOptionCount),
-- 
2.37.2

[PATCH 2/3] MdeModulePkg/XhciDxe/Xhci: Don't check for invalid PSIV

[Sean Rhodes]

From: Matt DeVillier <matt.devillier@gmail.com>

PSID matching relies on comparing the PSIV against the PortSpeed
value. This patch stops edk2 from checking for a PSIV of 0, as it
is not valid; this reduces the number of register access by
approximately 6 per second.

Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: If15c55ab66d2e7faa832ce8576d2e5b47157cc9a
---
 MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 44 ++++++++++++++++-------------
 1 file changed, 25 insertions(+), 19 deletions(-)

diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
index 15fb49f28f..8dd7a8fbb7 100644
--- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
+++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
@@ -371,6 +371,7 @@ XhcGetRootHubPortStatus (
   UINT32             TotalPort;
   UINTN              Index;
   UINTN              MapSize;
+  UINT8              PortSpeed;
   EFI_STATUS         Status;
   USB_DEV_ROUTE      ParentRouteChart;
   EFI_TPL            OldTpl;
@@ -397,32 +398,37 @@ XhcGetRootHubPortStatus (
 
   State = XhcReadOpReg (Xhc, Offset);
 
+  PortSpeed = (State & XHC_PORTSC_PS) >> 10;
+
   //
   // According to XHCI 1.1 spec November 2017,
   // Section 7.2 xHCI Support Protocol Capability
   //
-  PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc, ((State & XHC_PORTSC_PS) >> 10));
-  if (PortStatus->PortStatus == 0) {
-    //
-    // According to XHCI 1.1 spec November 2017,
-    // bit 10~13 of the root port status register identifies the speed of the attached device.
-    //
-    switch ((State & XHC_PORTSC_PS) >> 10) {
-      case 2:
-        PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
-        break;
+  if (PortSpeed > 0) {
+    PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc, PortSpeed);
+    // If no match found in ext cap reg, fall back to PORTSC
+    if (PortStatus->PortStatus == 0) {
+      //
+      // According to XHCI 1.1 spec November 2017,
+      // bit 10~13 of the root port status register identifies the speed of the attached device.
+      //
+      switch (PortSpeed) {
+        case 2:
+          PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
+          break;
 
-      case 3:
-        PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
-        break;
+        case 3:
+          PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
+          break;
 
-      case 4:
-      case 5:
-        PortStatus->PortStatus |= USB_PORT_STAT_SUPER_SPEED;
-        break;
+        case 4:
+        case 5:
+          PortStatus->PortStatus |= USB_PORT_STAT_SUPER_SPEED;
+          break;
 
-      default:
-        break;
+        default:
+          break;
+      }
     }
   }
 
-- 
2.37.2

Re: [PATCH 2/3] MdeModulePkg/XhciDxe/Xhci: Don't check for invalid PSIV

[Wu, Hao A]

Reviewed-by: Hao A Wu <hao.a.wu@intel.com>

Best Regards,
Hao Wu

> -----Original Message-----
> From: Sean Rhodes <sean@starlabs.systems>
> Sent: Friday, December 16, 2022 4:58 PM
> To: devel@edk2.groups.io
> Cc: Matt DeVillier <matt.devillier@gmail.com>; Wu, Hao A
> <hao.a.wu@intel.com>; Ni, Ray <ray.ni@intel.com>; Rhodes, Sean
> <sean@starlabs.systems>
> Subject: [PATCH 2/3] MdeModulePkg/XhciDxe/Xhci: Don't check for invalid
> PSIV
> 
> From: Matt DeVillier <matt.devillier@gmail.com>
> 
> PSID matching relies on comparing the PSIV against the PortSpeed
> value. This patch stops edk2 from checking for a PSIV of 0, as it
> is not valid; this reduces the number of register access by
> approximately 6 per second.
> 
> Cc: Hao A Wu <hao.a.wu@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
> Change-Id: If15c55ab66d2e7faa832ce8576d2e5b47157cc9a
> ---
>  MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 44 ++++++++++++++++-------------
>  1 file changed, 25 insertions(+), 19 deletions(-)
> 
> diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> index 15fb49f28f..8dd7a8fbb7 100644
> --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> @@ -371,6 +371,7 @@ XhcGetRootHubPortStatus (
>    UINT32             TotalPort;
> 
>    UINTN              Index;
> 
>    UINTN              MapSize;
> 
> +  UINT8              PortSpeed;
> 
>    EFI_STATUS         Status;
> 
>    USB_DEV_ROUTE      ParentRouteChart;
> 
>    EFI_TPL            OldTpl;
> 
> @@ -397,32 +398,37 @@ XhcGetRootHubPortStatus (
> 
> 
>    State = XhcReadOpReg (Xhc, Offset);
> 
> 
> 
> +  PortSpeed = (State & XHC_PORTSC_PS) >> 10;
> 
> +
> 
>    //
> 
>    // According to XHCI 1.1 spec November 2017,
> 
>    // Section 7.2 xHCI Support Protocol Capability
> 
>    //
> 
> -  PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc, ((State &
> XHC_PORTSC_PS) >> 10));
> 
> -  if (PortStatus->PortStatus == 0) {
> 
> -    //
> 
> -    // According to XHCI 1.1 spec November 2017,
> 
> -    // bit 10~13 of the root port status register identifies the speed of the
> attached device.
> 
> -    //
> 
> -    switch ((State & XHC_PORTSC_PS) >> 10) {
> 
> -      case 2:
> 
> -        PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
> 
> -        break;
> 
> +  if (PortSpeed > 0) {
> 
> +    PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc,
> PortSpeed);
> 
> +    // If no match found in ext cap reg, fall back to PORTSC
> 
> +    if (PortStatus->PortStatus == 0) {
> 
> +      //
> 
> +      // According to XHCI 1.1 spec November 2017,
> 
> +      // bit 10~13 of the root port status register identifies the speed of the
> attached device.
> 
> +      //
> 
> +      switch (PortSpeed) {
> 
> +        case 2:
> 
> +          PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
> 
> +          break;
> 
> 
> 
> -      case 3:
> 
> -        PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
> 
> -        break;
> 
> +        case 3:
> 
> +          PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
> 
> +          break;
> 
> 
> 
> -      case 4:
> 
> -      case 5:
> 
> -        PortStatus->PortStatus |= USB_PORT_STAT_SUPER_SPEED;
> 
> -        break;
> 
> +        case 4:
> 
> +        case 5:
> 
> +          PortStatus->PortStatus |= USB_PORT_STAT_SUPER_SPEED;
> 
> +          break;
> 
> 
> 
> -      default:
> 
> -        break;
> 
> +        default:
> 
> +          break;
> 
> +      }
> 
>      }
> 
>    }
> 
> 
> 
> --
> 2.37.2

Re: [edk2-devel] [PATCH 2/3] MdeModulePkg/XhciDxe/Xhci: Don't check for invalid PSIV

[Wu, Hao A]

Merged via:
PR - https://github.com/tianocore/edk2/pull/3806
Commit - https://github.com/tianocore/edk2/commit/01c2fb0d2260d4de898e4e91e48770ffa5510153

Best Regards,
Hao Wu

> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Wu, Hao
> A
> Sent: Monday, December 19, 2022 2:16 PM
> To: Rhodes, Sean <sean@starlabs.systems>; devel@edk2.groups.io
> Cc: Matt DeVillier <matt.devillier@gmail.com>; Ni, Ray <ray.ni@intel.com>;
> Rhodes, Sean <sean@starlabs.systems>
> Subject: Re: [edk2-devel] [PATCH 2/3] MdeModulePkg/XhciDxe/Xhci: Don't
> check for invalid PSIV
> 
> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
> 
> Best Regards,
> Hao Wu
> 
> > -----Original Message-----
> > From: Sean Rhodes <sean@starlabs.systems>
> > Sent: Friday, December 16, 2022 4:58 PM
> > To: devel@edk2.groups.io
> > Cc: Matt DeVillier <matt.devillier@gmail.com>; Wu, Hao A
> > <hao.a.wu@intel.com>; Ni, Ray <ray.ni@intel.com>; Rhodes, Sean
> > <sean@starlabs.systems>
> > Subject: [PATCH 2/3] MdeModulePkg/XhciDxe/Xhci: Don't check for
> > invalid PSIV
> >
> > From: Matt DeVillier <matt.devillier@gmail.com>
> >
> > PSID matching relies on comparing the PSIV against the PortSpeed
> > value. This patch stops edk2 from checking for a PSIV of 0, as it is
> > not valid; this reduces the number of register access by approximately
> > 6 per second.
> >
> > Cc: Hao A Wu <hao.a.wu@intel.com>
> > Cc: Ray Ni <ray.ni@intel.com>
> > Reviewed-by: Sean Rhodes <sean@starlabs.systems>
> > Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
> > Change-Id: If15c55ab66d2e7faa832ce8576d2e5b47157cc9a
> > ---
> >  MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c | 44
> > ++++++++++++++++-------------
> >  1 file changed, 25 insertions(+), 19 deletions(-)
> >
> > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > index 15fb49f28f..8dd7a8fbb7 100644
> > --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > @@ -371,6 +371,7 @@ XhcGetRootHubPortStatus (
> >    UINT32             TotalPort;
> >
> >    UINTN              Index;
> >
> >    UINTN              MapSize;
> >
> > +  UINT8              PortSpeed;
> >
> >    EFI_STATUS         Status;
> >
> >    USB_DEV_ROUTE      ParentRouteChart;
> >
> >    EFI_TPL            OldTpl;
> >
> > @@ -397,32 +398,37 @@ XhcGetRootHubPortStatus (
> >
> >
> >    State = XhcReadOpReg (Xhc, Offset);
> >
> >
> >
> > +  PortSpeed = (State & XHC_PORTSC_PS) >> 10;
> >
> > +
> >
> >    //
> >
> >    // According to XHCI 1.1 spec November 2017,
> >
> >    // Section 7.2 xHCI Support Protocol Capability
> >
> >    //
> >
> > -  PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc, ((State
> > &
> > XHC_PORTSC_PS) >> 10));
> >
> > -  if (PortStatus->PortStatus == 0) {
> >
> > -    //
> >
> > -    // According to XHCI 1.1 spec November 2017,
> >
> > -    // bit 10~13 of the root port status register identifies the speed of the
> > attached device.
> >
> > -    //
> >
> > -    switch ((State & XHC_PORTSC_PS) >> 10) {
> >
> > -      case 2:
> >
> > -        PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
> >
> > -        break;
> >
> > +  if (PortSpeed > 0) {
> >
> > +    PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc,
> > PortSpeed);
> >
> > +    // If no match found in ext cap reg, fall back to PORTSC
> >
> > +    if (PortStatus->PortStatus == 0) {
> >
> > +      //
> >
> > +      // According to XHCI 1.1 spec November 2017,
> >
> > +      // bit 10~13 of the root port status register identifies the
> > + speed of the
> > attached device.
> >
> > +      //
> >
> > +      switch (PortSpeed) {
> >
> > +        case 2:
> >
> > +          PortStatus->PortStatus |= USB_PORT_STAT_LOW_SPEED;
> >
> > +          break;
> >
> >
> >
> > -      case 3:
> >
> > -        PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
> >
> > -        break;
> >
> > +        case 3:
> >
> > +          PortStatus->PortStatus |= USB_PORT_STAT_HIGH_SPEED;
> >
> > +          break;
> >
> >
> >
> > -      case 4:
> >
> > -      case 5:
> >
> > -        PortStatus->PortStatus |= USB_PORT_STAT_SUPER_SPEED;
> >
> > -        break;
> >
> > +        case 4:
> >
> > +        case 5:
> >
> > +          PortStatus->PortStatus |= USB_PORT_STAT_SUPER_SPEED;
> >
> > +          break;
> >
> >
> >
> > -      default:
> >
> > -        break;
> >
> > +        default:
> >
> > +          break;
> >
> > +      }
> >
> >      }
> >
> >    }
> >
> >
> >
> > --
> > 2.37.2
> 
> 
> 
> 
> 

[PATCH 3/3] MdeModulePkg/Bus/Pci/XhciDxe: Check port is compatible before getting PSIV

[Sean Rhodes]

On some platforms, including Sky Lake and Kaby Lake, the PSIV (Protocol
Speed ID Value) indices are shared between Protocol Speed ID DWORD' in
the extended capabilities registers for both USB2 (Full Speed) and USB3
(Super Speed).

An example can be found below:

    XhcCheckUsbPortSpeedUsedPsic: checking for USB2 ext caps
    XhciPsivGetPsid: found 3 PSID entries
    XhciPsivGetPsid: looking for port speed 1
    XhciPsivGetPsid: PSIV 1 PSIE 2 PLT 0 PSIM 12
    XhciPsivGetPsid: PSIV 2 PSIE 1 PLT 0 PSIM 1500
    XhciPsivGetPsid: PSIV 3 PSIE 2 PLT 0 PSIM 480
    XhcCheckUsbPortSpeedUsedPsic: checking for USB3 ext caps
    XhciPsivGetPsid: found 3 PSID entries
    XhciPsivGetPsid: looking for port speed 1
    XhciPsivGetPsid: PSIV 1 PSIE 3 PLT 0 PSIM 5
    XhciPsivGetPsid: PSIV 2 PSIE 3 PLT 0 PSIM 10
    XhciPsivGetPsid: PSIV 34 PSIE 2 PLT 0 PSIM 1248

The result is edk2 detecting USB2 devices as USB3 devices, which
consequently causes enumeration to fail.

To avoid incorrect detection, check the Compatible Port Offset to find
the starting Port of Root Hubs that support the protocol.

Signed-off-by: Sean Rhodes <sean@starlabs.systems>
---
 MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c    |  2 +-
 MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c | 35 +++++++++++++++++++++-----
 MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h |  8 +++---
 3 files changed, 35 insertions(+), 10 deletions(-)

diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
index 8dd7a8fbb7..461b2cd9b5 100644
--- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
+++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
@@ -405,7 +405,7 @@ XhcGetRootHubPortStatus (
   // Section 7.2 xHCI Support Protocol Capability
   //
   if (PortSpeed > 0) {
-    PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc, PortSpeed);
+    PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc, PortSpeed, PortNumber);
     // If no match found in ext cap reg, fall back to PORTSC
     if (PortStatus->PortStatus == 0) {
       //
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
index 2b4a4b2444..5700fc5fb8 100644
--- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
+++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
@@ -636,6 +636,7 @@ XhcGetSupportedProtocolCapabilityAddr (
   @param  Xhc            The XHCI Instance.
   @param  ExtCapOffset   The USB Major Version in xHCI Support Protocol Capability Field
   @param  PortSpeed      The Port Speed Field in USB PortSc register
+  @param  PortNumber     The Port Number (0-indexed)
 
   @return The Protocol Speed ID (PSI) from xHCI Supported Protocol capability register.
 
@@ -644,12 +645,15 @@ UINT32
 XhciPsivGetPsid (
   IN USB_XHCI_INSTANCE  *Xhc,
   IN UINT32             ExtCapOffset,
-  IN UINT8              PortSpeed
+  IN UINT8              PortSpeed,
+  IN UINT8              PortNumber
   )
 {
   XHC_SUPPORTED_PROTOCOL_DW2                PortId;
   XHC_SUPPORTED_PROTOCOL_PROTOCOL_SPEED_ID  Reg;
   UINT32                                    Count;
+  UINT32                                    MinPortIndex;
+  UINT32                                    MaxPortIndex;
 
   if ((Xhc == NULL) || (ExtCapOffset == 0xFFFFFFFF)) {
     return 0;
@@ -663,6 +667,23 @@ XhciPsivGetPsid (
   //
   PortId.Dword = XhcReadExtCapReg (Xhc, ExtCapOffset + XHC_SUPPORTED_PROTOCOL_DW2_OFFSET);
 
+  //
+  // According to XHCI 1.1 spec November 2017, valid values
+  // for CompPortOffset are 1 to CompPortCount - 1.
+  //
+  // PortNumber is zero-indexed, so subtract 1.
+  //
+  if ((PortId.Data.CompPortOffset == 0) || (PortId.Data.CompPortCount == 0)) {
+    return 0;
+  }
+
+  MinPortIndex = PortId.Data.CompPortOffset - 1;
+  MaxPortIndex = MinPortIndex + PortId.Data.CompPortCount - 1;
+
+  if ((PortNumber < MinPortIndex) || (PortNumber > MaxPortIndex)) {
+    return 0;
+  }
+
   for (Count = 0; Count < PortId.Data.Psic; Count++) {
     Reg.Dword = XhcReadExtCapReg (Xhc, ExtCapOffset + XHC_SUPPORTED_PROTOCOL_PSI_OFFSET + (Count << 2));
     if (Reg.Data.Psiv == PortSpeed) {
@@ -676,8 +697,9 @@ XhciPsivGetPsid (
 /**
   Find PortSpeed value match case in XHCI Supported Protocol Capability
 
-  @param  Xhc        The XHCI Instance.
-  @param  PortSpeed  The Port Speed Field in USB PortSc register
+  @param  Xhc         The XHCI Instance.
+  @param  PortSpeed   The Port Speed Field in USB PortSc register
+  @param  PortNumber  The Port Number (0-indexed)
 
   @return The USB Port Speed.
 
@@ -685,7 +707,8 @@ XhciPsivGetPsid (
 UINT16
 XhcCheckUsbPortSpeedUsedPsic (
   IN USB_XHCI_INSTANCE  *Xhc,
-  IN UINT8              PortSpeed
+  IN UINT8              PortSpeed,
+  IN UINT8              PortNumber
   )
 {
   XHC_SUPPORTED_PROTOCOL_PROTOCOL_SPEED_ID  SpField;
@@ -703,7 +726,7 @@ XhcCheckUsbPortSpeedUsedPsic (
   // PortSpeed definition when the Major Revision is 03h.
   //
   if (Xhc->Usb3SupOffset != 0xFFFFFFFF) {
-    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset, PortSpeed);
+    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset, PortSpeed, PortNumber);
     if (SpField.Dword != 0) {
       //
       // Found the corresponding PORTSC value in PSIV field of USB3 offset.
@@ -717,7 +740,7 @@ XhcCheckUsbPortSpeedUsedPsic (
   // PortSpeed definition when the Major Revision is 02h.
   //
   if ((UsbSpeedIdMap == 0) && (Xhc->Usb2SupOffset != 0xFFFFFFFF)) {
-    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb2SupOffset, PortSpeed);
+    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb2SupOffset, PortSpeed, PortNumber);
     if (SpField.Dword != 0) {
       //
       // Found the corresponding PORTSC value in PSIV field of USB2 offset.
diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
index 5fe2ba4f0e..2e4f95f8ac 100644
--- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
+++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
@@ -623,8 +623,9 @@ XhcGetSupportedProtocolCapabilityAddr (
 /**
   Find SpeedField value match with Port Speed ID value.
 
-  @param  Xhc    The XHCI Instance.
-  @param  Speed  The Port Speed filed in USB PortSc register
+  @param  Xhc         The XHCI Instance.
+  @param  Speed       The Port Speed filed in USB PortSc register
+  @param  PortNumber  The Port Number (0-indexed)
 
   @return The USB Port Speed.
 
@@ -632,7 +633,8 @@ XhcGetSupportedProtocolCapabilityAddr (
 UINT16
 XhcCheckUsbPortSpeedUsedPsic (
   IN USB_XHCI_INSTANCE  *Xhc,
-  IN UINT8              Speed
+  IN UINT8              Speed,
+  IN UINT8              PortNumber
   );
 
 #endif
-- 
2.37.2

Re: [edk2-devel] [PATCH 3/3] MdeModulePkg/Bus/Pci/XhciDxe: Check port is compatible before getting PSIV

[Wu, Hao A]

Reviewed-by: Hao A Wu <hao.a.wu@intel.com>

I will make minor modification to:
* Function description comment
* Input parameter name
of XhcCheckUsbPortSpeedUsedPsic() to make the declaration (in .H) and the definition (in .C) match.

Best Regards,
Hao Wu

> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sean
> Rhodes
> Sent: Friday, December 16, 2022 4:58 PM
> To: devel@edk2.groups.io
> Cc: Rhodes, Sean <sean@starlabs.systems>
> Subject: [edk2-devel] [PATCH 3/3] MdeModulePkg/Bus/Pci/XhciDxe: Check
> port is compatible before getting PSIV
> 
> On some platforms, including Sky Lake and Kaby Lake, the PSIV (Protocol
> Speed ID Value) indices are shared between Protocol Speed ID DWORD' in
> the extended capabilities registers for both USB2 (Full Speed) and USB3
> (Super Speed).
> 
> An example can be found below:
> 
>     XhcCheckUsbPortSpeedUsedPsic: checking for USB2 ext caps
>     XhciPsivGetPsid: found 3 PSID entries
>     XhciPsivGetPsid: looking for port speed 1
>     XhciPsivGetPsid: PSIV 1 PSIE 2 PLT 0 PSIM 12
>     XhciPsivGetPsid: PSIV 2 PSIE 1 PLT 0 PSIM 1500
>     XhciPsivGetPsid: PSIV 3 PSIE 2 PLT 0 PSIM 480
>     XhcCheckUsbPortSpeedUsedPsic: checking for USB3 ext caps
>     XhciPsivGetPsid: found 3 PSID entries
>     XhciPsivGetPsid: looking for port speed 1
>     XhciPsivGetPsid: PSIV 1 PSIE 3 PLT 0 PSIM 5
>     XhciPsivGetPsid: PSIV 2 PSIE 3 PLT 0 PSIM 10
>     XhciPsivGetPsid: PSIV 34 PSIE 2 PLT 0 PSIM 1248
> 
> The result is edk2 detecting USB2 devices as USB3 devices, which
> consequently causes enumeration to fail.
> 
> To avoid incorrect detection, check the Compatible Port Offset to find
> the starting Port of Root Hubs that support the protocol.
> 
> Signed-off-by: Sean Rhodes <sean@starlabs.systems>
> ---
>  MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c    |  2 +-
>  MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c | 35 +++++++++++++++++++++--
> ---
>  MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h |  8 +++---
>  3 files changed, 35 insertions(+), 10 deletions(-)
> 
> diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> index 8dd7a8fbb7..461b2cd9b5 100644
> --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> @@ -405,7 +405,7 @@ XhcGetRootHubPortStatus (
>    // Section 7.2 xHCI Support Protocol Capability
> 
>    //
> 
>    if (PortSpeed > 0) {
> 
> -    PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc,
> PortSpeed);
> 
> +    PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc,
> PortSpeed, PortNumber);
> 
>      // If no match found in ext cap reg, fall back to PORTSC
> 
>      if (PortStatus->PortStatus == 0) {
> 
>        //
> 
> diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> index 2b4a4b2444..5700fc5fb8 100644
> --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> @@ -636,6 +636,7 @@ XhcGetSupportedProtocolCapabilityAddr (
>    @param  Xhc            The XHCI Instance.
> 
>    @param  ExtCapOffset   The USB Major Version in xHCI Support Protocol
> Capability Field
> 
>    @param  PortSpeed      The Port Speed Field in USB PortSc register
> 
> +  @param  PortNumber     The Port Number (0-indexed)
> 
> 
> 
>    @return The Protocol Speed ID (PSI) from xHCI Supported Protocol
> capability register.
> 
> 
> 
> @@ -644,12 +645,15 @@ UINT32
>  XhciPsivGetPsid (
> 
>    IN USB_XHCI_INSTANCE  *Xhc,
> 
>    IN UINT32             ExtCapOffset,
> 
> -  IN UINT8              PortSpeed
> 
> +  IN UINT8              PortSpeed,
> 
> +  IN UINT8              PortNumber
> 
>    )
> 
>  {
> 
>    XHC_SUPPORTED_PROTOCOL_DW2                PortId;
> 
>    XHC_SUPPORTED_PROTOCOL_PROTOCOL_SPEED_ID  Reg;
> 
>    UINT32                                    Count;
> 
> +  UINT32                                    MinPortIndex;
> 
> +  UINT32                                    MaxPortIndex;
> 
> 
> 
>    if ((Xhc == NULL) || (ExtCapOffset == 0xFFFFFFFF)) {
> 
>      return 0;
> 
> @@ -663,6 +667,23 @@ XhciPsivGetPsid (
>    //
> 
>    PortId.Dword = XhcReadExtCapReg (Xhc, ExtCapOffset +
> XHC_SUPPORTED_PROTOCOL_DW2_OFFSET);
> 
> 
> 
> +  //
> 
> +  // According to XHCI 1.1 spec November 2017, valid values
> 
> +  // for CompPortOffset are 1 to CompPortCount - 1.
> 
> +  //
> 
> +  // PortNumber is zero-indexed, so subtract 1.
> 
> +  //
> 
> +  if ((PortId.Data.CompPortOffset == 0) || (PortId.Data.CompPortCount ==
> 0)) {
> 
> +    return 0;
> 
> +  }
> 
> +
> 
> +  MinPortIndex = PortId.Data.CompPortOffset - 1;
> 
> +  MaxPortIndex = MinPortIndex + PortId.Data.CompPortCount - 1;
> 
> +
> 
> +  if ((PortNumber < MinPortIndex) || (PortNumber > MaxPortIndex)) {
> 
> +    return 0;
> 
> +  }
> 
> +
> 
>    for (Count = 0; Count < PortId.Data.Psic; Count++) {
> 
>      Reg.Dword = XhcReadExtCapReg (Xhc, ExtCapOffset +
> XHC_SUPPORTED_PROTOCOL_PSI_OFFSET + (Count << 2));
> 
>      if (Reg.Data.Psiv == PortSpeed) {
> 
> @@ -676,8 +697,9 @@ XhciPsivGetPsid (
>  /**
> 
>    Find PortSpeed value match case in XHCI Supported Protocol Capability
> 
> 
> 
> -  @param  Xhc        The XHCI Instance.
> 
> -  @param  PortSpeed  The Port Speed Field in USB PortSc register
> 
> +  @param  Xhc         The XHCI Instance.
> 
> +  @param  PortSpeed   The Port Speed Field in USB PortSc register
> 
> +  @param  PortNumber  The Port Number (0-indexed)
> 
> 
> 
>    @return The USB Port Speed.
> 
> 
> 
> @@ -685,7 +707,8 @@ XhciPsivGetPsid (
>  UINT16
> 
>  XhcCheckUsbPortSpeedUsedPsic (
> 
>    IN USB_XHCI_INSTANCE  *Xhc,
> 
> -  IN UINT8              PortSpeed
> 
> +  IN UINT8              PortSpeed,
> 
> +  IN UINT8              PortNumber
> 
>    )
> 
>  {
> 
>    XHC_SUPPORTED_PROTOCOL_PROTOCOL_SPEED_ID  SpField;
> 
> @@ -703,7 +726,7 @@ XhcCheckUsbPortSpeedUsedPsic (
>    // PortSpeed definition when the Major Revision is 03h.
> 
>    //
> 
>    if (Xhc->Usb3SupOffset != 0xFFFFFFFF) {
> 
> -    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset, PortSpeed);
> 
> +    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset, PortSpeed,
> PortNumber);
> 
>      if (SpField.Dword != 0) {
> 
>        //
> 
>        // Found the corresponding PORTSC value in PSIV field of USB3 offset.
> 
> @@ -717,7 +740,7 @@ XhcCheckUsbPortSpeedUsedPsic (
>    // PortSpeed definition when the Major Revision is 02h.
> 
>    //
> 
>    if ((UsbSpeedIdMap == 0) && (Xhc->Usb2SupOffset != 0xFFFFFFFF)) {
> 
> -    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb2SupOffset, PortSpeed);
> 
> +    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb2SupOffset, PortSpeed,
> PortNumber);
> 
>      if (SpField.Dword != 0) {
> 
>        //
> 
>        // Found the corresponding PORTSC value in PSIV field of USB2 offset.
> 
> diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> index 5fe2ba4f0e..2e4f95f8ac 100644
> --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> @@ -623,8 +623,9 @@ XhcGetSupportedProtocolCapabilityAddr (
>  /**
> 
>    Find SpeedField value match with Port Speed ID value.
> 
> 
> 
> -  @param  Xhc    The XHCI Instance.
> 
> -  @param  Speed  The Port Speed filed in USB PortSc register
> 
> +  @param  Xhc         The XHCI Instance.
> 
> +  @param  Speed       The Port Speed filed in USB PortSc register
> 
> +  @param  PortNumber  The Port Number (0-indexed)
> 
> 
> 
>    @return The USB Port Speed.
> 
> 
> 
> @@ -632,7 +633,8 @@ XhcGetSupportedProtocolCapabilityAddr (
>  UINT16
> 
>  XhcCheckUsbPortSpeedUsedPsic (
> 
>    IN USB_XHCI_INSTANCE  *Xhc,
> 
> -  IN UINT8              Speed
> 
> +  IN UINT8              Speed,
> 
> +  IN UINT8              PortNumber
> 
>    );
> 
> 
> 
>  #endif
> 
> --
> 2.37.2
> 
> 
> 
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#97497): https://edk2.groups.io/g/devel/message/97497
> Mute This Topic: https://groups.io/mt/95706436/1768737
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [hao.a.wu@intel.com]
> -=-=-=-=-=-=
> 

Re: [edk2-devel] [PATCH 3/3] MdeModulePkg/Bus/Pci/XhciDxe: Check port is compatible before getting PSIV

[Wu, Hao A]

Merged via:
PR - https://github.com/tianocore/edk2/pull/3806
Commit - https://github.com/tianocore/edk2/commit/ec25e904c7da70302f2725e2005e3762f1ae891e

Best Regards,
Hao Wu

> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Wu, Hao
> A
> Sent: Monday, December 19, 2022 3:46 PM
> To: devel@edk2.groups.io; Rhodes, Sean <sean@starlabs.systems>
> Subject: Re: [edk2-devel] [PATCH 3/3] MdeModulePkg/Bus/Pci/XhciDxe:
> Check port is compatible before getting PSIV
> 
> Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
> 
> I will make minor modification to:
> * Function description comment
> * Input parameter name
> of XhcCheckUsbPortSpeedUsedPsic() to make the declaration (in .H) and the
> definition (in .C) match.
> 
> Best Regards,
> Hao Wu
> 
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sean
> > Rhodes
> > Sent: Friday, December 16, 2022 4:58 PM
> > To: devel@edk2.groups.io
> > Cc: Rhodes, Sean <sean@starlabs.systems>
> > Subject: [edk2-devel] [PATCH 3/3] MdeModulePkg/Bus/Pci/XhciDxe: Check
> > port is compatible before getting PSIV
> >
> > On some platforms, including Sky Lake and Kaby Lake, the PSIV
> > (Protocol Speed ID Value) indices are shared between Protocol Speed ID
> > DWORD' in the extended capabilities registers for both USB2 (Full
> > Speed) and USB3 (Super Speed).
> >
> > An example can be found below:
> >
> >     XhcCheckUsbPortSpeedUsedPsic: checking for USB2 ext caps
> >     XhciPsivGetPsid: found 3 PSID entries
> >     XhciPsivGetPsid: looking for port speed 1
> >     XhciPsivGetPsid: PSIV 1 PSIE 2 PLT 0 PSIM 12
> >     XhciPsivGetPsid: PSIV 2 PSIE 1 PLT 0 PSIM 1500
> >     XhciPsivGetPsid: PSIV 3 PSIE 2 PLT 0 PSIM 480
> >     XhcCheckUsbPortSpeedUsedPsic: checking for USB3 ext caps
> >     XhciPsivGetPsid: found 3 PSID entries
> >     XhciPsivGetPsid: looking for port speed 1
> >     XhciPsivGetPsid: PSIV 1 PSIE 3 PLT 0 PSIM 5
> >     XhciPsivGetPsid: PSIV 2 PSIE 3 PLT 0 PSIM 10
> >     XhciPsivGetPsid: PSIV 34 PSIE 2 PLT 0 PSIM 1248
> >
> > The result is edk2 detecting USB2 devices as USB3 devices, which
> > consequently causes enumeration to fail.
> >
> > To avoid incorrect detection, check the Compatible Port Offset to find
> > the starting Port of Root Hubs that support the protocol.
> >
> > Signed-off-by: Sean Rhodes <sean@starlabs.systems>
> > ---
> >  MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c    |  2 +-
> >  MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c | 35 +++++++++++++++++++++--
> > ---
> >  MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h |  8 +++---
> >  3 files changed, 35 insertions(+), 10 deletions(-)
> >
> > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > index 8dd7a8fbb7..461b2cd9b5 100644
> > --- a/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/Xhci.c
> > @@ -405,7 +405,7 @@ XhcGetRootHubPortStatus (
> >    // Section 7.2 xHCI Support Protocol Capability
> >
> >    //
> >
> >    if (PortSpeed > 0) {
> >
> > -    PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc,
> > PortSpeed);
> >
> > +    PortStatus->PortStatus = XhcCheckUsbPortSpeedUsedPsic (Xhc,
> > PortSpeed, PortNumber);
> >
> >      // If no match found in ext cap reg, fall back to PORTSC
> >
> >      if (PortStatus->PortStatus == 0) {
> >
> >        //
> >
> > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> > b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> > index 2b4a4b2444..5700fc5fb8 100644
> > --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.c
> > @@ -636,6 +636,7 @@ XhcGetSupportedProtocolCapabilityAddr (
> >    @param  Xhc            The XHCI Instance.
> >
> >    @param  ExtCapOffset   The USB Major Version in xHCI Support Protocol
> > Capability Field
> >
> >    @param  PortSpeed      The Port Speed Field in USB PortSc register
> >
> > +  @param  PortNumber     The Port Number (0-indexed)
> >
> >
> >
> >    @return The Protocol Speed ID (PSI) from xHCI Supported Protocol
> > capability register.
> >
> >
> >
> > @@ -644,12 +645,15 @@ UINT32
> >  XhciPsivGetPsid (
> >
> >    IN USB_XHCI_INSTANCE  *Xhc,
> >
> >    IN UINT32             ExtCapOffset,
> >
> > -  IN UINT8              PortSpeed
> >
> > +  IN UINT8              PortSpeed,
> >
> > +  IN UINT8              PortNumber
> >
> >    )
> >
> >  {
> >
> >    XHC_SUPPORTED_PROTOCOL_DW2                PortId;
> >
> >    XHC_SUPPORTED_PROTOCOL_PROTOCOL_SPEED_ID  Reg;
> >
> >    UINT32                                    Count;
> >
> > +  UINT32                                    MinPortIndex;
> >
> > +  UINT32                                    MaxPortIndex;
> >
> >
> >
> >    if ((Xhc == NULL) || (ExtCapOffset == 0xFFFFFFFF)) {
> >
> >      return 0;
> >
> > @@ -663,6 +667,23 @@ XhciPsivGetPsid (
> >    //
> >
> >    PortId.Dword = XhcReadExtCapReg (Xhc, ExtCapOffset +
> > XHC_SUPPORTED_PROTOCOL_DW2_OFFSET);
> >
> >
> >
> > +  //
> >
> > +  // According to XHCI 1.1 spec November 2017, valid values
> >
> > +  // for CompPortOffset are 1 to CompPortCount - 1.
> >
> > +  //
> >
> > +  // PortNumber is zero-indexed, so subtract 1.
> >
> > +  //
> >
> > +  if ((PortId.Data.CompPortOffset == 0) || (PortId.Data.CompPortCount
> > + ==
> > 0)) {
> >
> > +    return 0;
> >
> > +  }
> >
> > +
> >
> > +  MinPortIndex = PortId.Data.CompPortOffset - 1;
> >
> > +  MaxPortIndex = MinPortIndex + PortId.Data.CompPortCount - 1;
> >
> > +
> >
> > +  if ((PortNumber < MinPortIndex) || (PortNumber > MaxPortIndex)) {
> >
> > +    return 0;
> >
> > +  }
> >
> > +
> >
> >    for (Count = 0; Count < PortId.Data.Psic; Count++) {
> >
> >      Reg.Dword = XhcReadExtCapReg (Xhc, ExtCapOffset +
> > XHC_SUPPORTED_PROTOCOL_PSI_OFFSET + (Count << 2));
> >
> >      if (Reg.Data.Psiv == PortSpeed) {
> >
> > @@ -676,8 +697,9 @@ XhciPsivGetPsid (
> >  /**
> >
> >    Find PortSpeed value match case in XHCI Supported Protocol
> > Capability
> >
> >
> >
> > -  @param  Xhc        The XHCI Instance.
> >
> > -  @param  PortSpeed  The Port Speed Field in USB PortSc register
> >
> > +  @param  Xhc         The XHCI Instance.
> >
> > +  @param  PortSpeed   The Port Speed Field in USB PortSc register
> >
> > +  @param  PortNumber  The Port Number (0-indexed)
> >
> >
> >
> >    @return The USB Port Speed.
> >
> >
> >
> > @@ -685,7 +707,8 @@ XhciPsivGetPsid (
> >  UINT16
> >
> >  XhcCheckUsbPortSpeedUsedPsic (
> >
> >    IN USB_XHCI_INSTANCE  *Xhc,
> >
> > -  IN UINT8              PortSpeed
> >
> > +  IN UINT8              PortSpeed,
> >
> > +  IN UINT8              PortNumber
> >
> >    )
> >
> >  {
> >
> >    XHC_SUPPORTED_PROTOCOL_PROTOCOL_SPEED_ID  SpField;
> >
> > @@ -703,7 +726,7 @@ XhcCheckUsbPortSpeedUsedPsic (
> >    // PortSpeed definition when the Major Revision is 03h.
> >
> >    //
> >
> >    if (Xhc->Usb3SupOffset != 0xFFFFFFFF) {
> >
> > -    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset, PortSpeed);
> >
> > +    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb3SupOffset,
> > + PortSpeed,
> > PortNumber);
> >
> >      if (SpField.Dword != 0) {
> >
> >        //
> >
> >        // Found the corresponding PORTSC value in PSIV field of USB3 offset.
> >
> > @@ -717,7 +740,7 @@ XhcCheckUsbPortSpeedUsedPsic (
> >    // PortSpeed definition when the Major Revision is 02h.
> >
> >    //
> >
> >    if ((UsbSpeedIdMap == 0) && (Xhc->Usb2SupOffset != 0xFFFFFFFF)) {
> >
> > -    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb2SupOffset, PortSpeed);
> >
> > +    SpField.Dword = XhciPsivGetPsid (Xhc, Xhc->Usb2SupOffset,
> > + PortSpeed,
> > PortNumber);
> >
> >      if (SpField.Dword != 0) {
> >
> >        //
> >
> >        // Found the corresponding PORTSC value in PSIV field of USB2 offset.
> >
> > diff --git a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> > b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> > index 5fe2ba4f0e..2e4f95f8ac 100644
> > --- a/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> > +++ b/MdeModulePkg/Bus/Pci/XhciDxe/XhciReg.h
> > @@ -623,8 +623,9 @@ XhcGetSupportedProtocolCapabilityAddr (
> >  /**
> >
> >    Find SpeedField value match with Port Speed ID value.
> >
> >
> >
> > -  @param  Xhc    The XHCI Instance.
> >
> > -  @param  Speed  The Port Speed filed in USB PortSc register
> >
> > +  @param  Xhc         The XHCI Instance.
> >
> > +  @param  Speed       The Port Speed filed in USB PortSc register
> >
> > +  @param  PortNumber  The Port Number (0-indexed)
> >
> >
> >
> >    @return The USB Port Speed.
> >
> >
> >
> > @@ -632,7 +633,8 @@ XhcGetSupportedProtocolCapabilityAddr (
> >  UINT16
> >
> >  XhcCheckUsbPortSpeedUsedPsic (
> >
> >    IN USB_XHCI_INSTANCE  *Xhc,
> >
> > -  IN UINT8              Speed
> >
> > +  IN UINT8              Speed,
> >
> > +  IN UINT8              PortNumber
> >
> >    );
> >
> >
> >
> >  #endif
> >
> > --
> > 2.37.2
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#97497):
> > https://edk2.groups.io/g/devel/message/97497
> > Mute This Topic: https://groups.io/mt/95706436/1768737
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub [hao.a.wu@intel.com]
> > -=-=-=-=-=-=
> >
> 
> 
> 
> 
> 

Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Ni, Ray]

Reviewed-by: Ray Ni <ray.ni@intel.com>


> -----Original Message-----
> From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sean Rhodes
> Sent: Friday, December 16, 2022 4:58 PM
> To: devel@edk2.groups.io
> Cc: Matt DeVillier <matt.devillier@gmail.com>; Wu, Hao A <hao.a.wu@intel.com>; Wang, Jian J <jian.j.wang@intel.com>;
> Gao, Liming <gaoliming@byosoft.com.cn>; Gao, Zhichao <zhichao.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Rhodes,
> Sean <sean@starlabs.systems>
> Subject: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present
> 
> From: Matt DeVillier <matt.devillier@gmail.com>
> 
> Only enumerate devices that have media present.
> 
> Cc: Hao A Wu <hao.a.wu@intel.com>
> Cc: Jian J Wang <jian.j.wang@intel.com>
> Cc: Liming Gao <gaoliming@byosoft.com.cn>
> Cc: Zhichao Gao <zhichao.gao@intel.com>
> Cc: Ray Ni <ray.ni@intel.com>
> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
> Change-Id: I78a0b8be3e2f33edce2d43bbdd7670e6174d0ff8
> ---
>  MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
> b/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
> index 962892d38f..bde22fa659 100644
> --- a/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
> +++ b/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
> @@ -2218,6 +2218,15 @@ BmEnumerateBootOptions (
>          continue;
> 
>        }
> 
> 
> 
> +      //
> 
> +      // Skip removable media if not present
> 
> +      //
> 
> +      if ((BlkIo->Media->RemovableMedia == TRUE) &&
> 
> +          (BlkIo->Media->MediaPresent == FALSE))
> 
> +      {
> 
> +        continue;
> 
> +      }
> 
> +
> 
>        Description = BmGetBootDescription (Handles[Index]);
> 
>        BootOptions = ReallocatePool (
> 
>                        sizeof (EFI_BOOT_MANAGER_LOAD_OPTION) * (*BootOptionCount),
> 
> --
> 2.37.2
> 
> 
> 
> -=-=-=-=-=-=
> Groups.io Links: You receive all messages sent to this group.
> View/Reply Online (#97498): https://edk2.groups.io/g/devel/message/97498
> Mute This Topic: https://groups.io/mt/95706437/1712937
> Group Owner: devel+owner@edk2.groups.io
> Unsubscribe: https://edk2.groups.io/g/devel/unsub [ray.ni@intel.com]
> -=-=-=-=-=-=
> 

Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Sean Rhodes]

[-- Attachment #1: Type: text/plain, Size: 2615 bytes --]

Hi Ray

Would it be possible to merge this?

Thanks

Sean

On Fri, 16 Dec 2022, 09:03 Ni, Ray, <ray.ni@intel.com> wrote:

> Reviewed-by: Ray Ni <ray.ni@intel.com>
>
>
> > -----Original Message-----
> > From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sean
> Rhodes
> > Sent: Friday, December 16, 2022 4:58 PM
> > To: devel@edk2.groups.io
> > Cc: Matt DeVillier <matt.devillier@gmail.com>; Wu, Hao A <
> hao.a.wu@intel.com>; Wang, Jian J <jian.j.wang@intel.com>;
> > Gao, Liming <gaoliming@byosoft.com.cn>; Gao, Zhichao <
> zhichao.gao@intel.com>; Ni, Ray <ray.ni@intel.com>; Rhodes,
> > Sean <sean@starlabs.systems>
> > Subject: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable
> media if it is not present
> >
> > From: Matt DeVillier <matt.devillier@gmail.com>
> >
> > Only enumerate devices that have media present.
> >
> > Cc: Hao A Wu <hao.a.wu@intel.com>
> > Cc: Jian J Wang <jian.j.wang@intel.com>
> > Cc: Liming Gao <gaoliming@byosoft.com.cn>
> > Cc: Zhichao Gao <zhichao.gao@intel.com>
> > Cc: Ray Ni <ray.ni@intel.com>
> > Reviewed-by: Sean Rhodes <sean@starlabs.systems>
> > Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
> > Change-Id: I78a0b8be3e2f33edce2d43bbdd7670e6174d0ff8
> > ---
> >  MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> >
> > diff --git a/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
> > b/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
> > index 962892d38f..bde22fa659 100644
> > --- a/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
> > +++ b/MdeModulePkg/Library/UefiBootManagerLib/BmBoot.c
> > @@ -2218,6 +2218,15 @@ BmEnumerateBootOptions (
> >          continue;
> >
> >        }
> >
> >
> >
> > +      //
> >
> > +      // Skip removable media if not present
> >
> > +      //
> >
> > +      if ((BlkIo->Media->RemovableMedia == TRUE) &&
> >
> > +          (BlkIo->Media->MediaPresent == FALSE))
> >
> > +      {
> >
> > +        continue;
> >
> > +      }
> >
> > +
> >
> >        Description = BmGetBootDescription (Handles[Index]);
> >
> >        BootOptions = ReallocatePool (
> >
> >                        sizeof (EFI_BOOT_MANAGER_LOAD_OPTION) *
> (*BootOptionCount),
> >
> > --
> > 2.37.2
> >
> >
> >
> > -=-=-=-=-=-=
> > Groups.io Links: You receive all messages sent to this group.
> > View/Reply Online (#97498): https://edk2.groups.io/g/devel/message/97498
> > Mute This Topic: https://groups.io/mt/95706437/1712937
> > Group Owner: devel+owner@edk2.groups.io
> > Unsubscribe: https://edk2.groups.io/g/devel/unsub [ray.ni@intel.com]
> > -=-=-=-=-=-=
> >
>
>
>
> 
>
>
>

[-- Attachment #2: Type: text/html, Size: 5410 bytes --]

Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Sheng Lean Tan]

[-- Attachment #1: Type: text/plain, Size: 99 bytes --]

Hi Ray,
This patch has been hanging along since last year. Has it been merged?

Thanks,
Sheng

[-- Attachment #2: Type: text/html, Size: 115 bytes --]

Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Ni, Ray]

[-- Attachment #1: Type: text/plain, Size: 536 bytes --]

@Wang, Jian J<mailto:jian.j.wang@intel.com>

thanks,
ray
________________________________
From: devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Sheng Lean Tan <sheng.tan@9elements.com>
Sent: Monday, February 13, 2023 6:01:21 PM
To: Rhodes, Sean <sean@starlabs.systems>; devel@edk2.groups.io <devel@edk2.groups.io>
Subject: Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

Hi Ray,
This patch has been hanging along since last year. Has it been merged?

Thanks,
Sheng


[-- Attachment #2: Type: text/html, Size: 1157 bytes --]

Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Sheng Lean Tan]

[-- Attachment #1: Type: text/plain, Size: 1132 bytes --]

Hi,
A kind reminder - has this been merged?

Best Regards,
*Lean Sheng Tan*



9elements GmbH, Kortumstraße 19-21, 44787 Bochum, Germany
Email: sheng.tan@9elements.com
Phone: *+49 234 68 94 188 <+492346894188>*
Mobile: *+49 176 76 113842 <+4917676113842>*

Registered office: Bochum
Commercial register: Amtsgericht Bochum, HRB 17519
Management: Sebastian German, Eray Bazaar

Data protection information according to Art. 13 GDPR
<https://9elements.com/privacy>


On Mon, 13 Feb 2023 at 12:57, Ni, Ray <ray.ni@intel.com> wrote:

> @Wang, Jian J <jian.j.wang@intel.com>
>
> thanks,
> ray
> ------------------------------
> *From:* devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Sheng
> Lean Tan <sheng.tan@9elements.com>
> *Sent:* Monday, February 13, 2023 6:01:21 PM
> *To:* Rhodes, Sean <sean@starlabs.systems>; devel@edk2.groups.io <
> devel@edk2.groups.io>
> *Subject:* Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip
> removable media if it is not present
>
> Hi Ray,
> This patch has been hanging along since last year. Has it been merged?
>
> Thanks,
> Sheng
> 
>

[-- Attachment #2: Type: text/html, Size: 4227 bytes --]

Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Sheng Lean Tan]

[-- Attachment #1: Type: text/plain, Size: 1851 bytes --]

@Jian J Wang <jian.j.wang@intel.com>
Any update on this? Anything needs to be done from our side?
Thanks.

Best Regards,
*Lean Sheng Tan*



9elements GmbH, Kortumstraße 19-21, 44787 Bochum, Germany
Email: sheng.tan@9elements.com
Phone: *+49 234 68 94 188 <+492346894188>*
Mobile: *+49 176 76 113842 <+4917676113842>*

Registered office: Bochum
Commercial register: Amtsgericht Bochum, HRB 17519
Management: Sebastian German, Eray Bazaar

Data protection information according to Art. 13 GDPR
<https://9elements.com/privacy>


On Fri, 17 Feb 2023 at 13:57, Sheng Lean Tan via groups.io <sheng.tan=
9elements.com@groups.io> wrote:

> Hi,
> A kind reminder - has this been merged?
>
> Best Regards,
> *Lean Sheng Tan*
>
>
>
> 9elements GmbH, Kortumstraße 19-21, 44787 Bochum, Germany
> Email: sheng.tan@9elements.com
> Phone: *+49 234 68 94 188 <+492346894188>*
> Mobile: *+49 176 76 113842 <+4917676113842>*
>
> Registered office: Bochum
> Commercial register: Amtsgericht Bochum, HRB 17519
> Management: Sebastian German, Eray Bazaar
>
> Data protection information according to Art. 13 GDPR
> <https://9elements.com/privacy>
>
>
> On Mon, 13 Feb 2023 at 12:57, Ni, Ray <ray.ni@intel.com> wrote:
>
>> @Wang, Jian J <jian.j.wang@intel.com>
>>
>> thanks,
>> ray
>> ------------------------------
>> *From:* devel@edk2.groups.io <devel@edk2.groups.io> on behalf of Sheng
>> Lean Tan <sheng.tan@9elements.com>
>> *Sent:* Monday, February 13, 2023 6:01:21 PM
>> *To:* Rhodes, Sean <sean@starlabs.systems>; devel@edk2.groups.io <
>> devel@edk2.groups.io>
>> *Subject:* Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip
>> removable media if it is not present
>>
>> Hi Ray,
>> This patch has been hanging along since last year. Has it been merged?
>>
>> Thanks,
>> Sheng
>>
> 
>
>

[-- Attachment #2: Type: text/html, Size: 7322 bytes --]

Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Sheng Lean Tan]

[-- Attachment #1: Type: text/plain, Size: 32 bytes --]

Another kind reminder, thanks.

[-- Attachment #2: Type: text/html, Size: 32 bytes --]

Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Sheng Lean Tan]

[-- Attachment #1: Type: text/plain, Size: 225 bytes --]

Seriously, what is the hold up here?
did Sean not following the process? Did he miss anything?
it just doesn’t make sense to keep ignoring this patch for half year for no reason. Is there a way to voice up a about this?

[-- Attachment #2: Type: text/html, Size: 237 bytes --]

Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Ni, Ray]

[-- Attachment #1: Type: text/plain, Size: 904 bytes --]

M: Jian J Wang jian.j.wang@intel.com<mailto:jian.j.wang@intel.com> [jwang36]
M: Liming Gao gaoliming@byosoft.com.cn<mailto:gaoliming@byosoft.com.cn> [lgao4]

Jian and Liming are maintainers of MdeModulePkg.
The patch passed my review. Either of them can help to merge the patch.

I guess Liming might not see this patch. I am sure he can help on merging it.


Thanks,
Ray

From: devel@edk2.groups.io <devel@edk2.groups.io> On Behalf Of Sheng Lean Tan
Sent: Wednesday, March 8, 2023 4:55 PM
To: Tan, Lean Sheng <sheng.tan@9elements.com>; devel@edk2.groups.io
Subject: Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

Seriously, what is the hold up here?
did Sean not following the process? Did he miss anything?
it just doesn’t make sense to keep ignoring this patch for half year for no reason. Is there a way to voice up a about this?


[-- Attachment #2: Type: text/html, Size: 3653 bytes --]

回复: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[gaoliming]

[-- Attachment #1: Type: text/plain, Size: 1566 bytes --]

Ray:

 You also have access to merge the patch. Sure, I can help merge this patch. 

 

Thanks

Liming

发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Ni, Ray
发送时间: 2023年3月8日 16:58
收件人: devel@edk2.groups.io; Tan, Lean Sheng <sheng.tan@9elements.com>
抄送: Wang, Jian J <jian.j.wang@intel.com>; Gao, Liming <gaoliming@byosoft.com.cn>
主题: Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

 

M: Jian J Wang jian.j.wang@intel.com <mailto:jian.j.wang@intel.com>  [jwang36]

M: Liming Gao gaoliming@byosoft.com.cn <mailto:gaoliming@byosoft.com.cn>  [lgao4]

 

Jian and Liming are maintainers of MdeModulePkg.

The patch passed my review. Either of them can help to merge the patch.

 

I guess Liming might not see this patch. I am sure he can help on merging it.

 

 

Thanks,

Ray

 

From: devel@edk2.groups.io <mailto:devel@edk2.groups.io>  <devel@edk2.groups.io <mailto:devel@edk2.groups.io> > On Behalf Of Sheng Lean Tan
Sent: Wednesday, March 8, 2023 4:55 PM
To: Tan, Lean Sheng <sheng.tan@9elements.com <mailto:sheng.tan@9elements.com> >; devel@edk2.groups.io <mailto:devel@edk2.groups.io> 
Subject: Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

 

Seriously, what is the hold up here?
did Sean not following the process? Did he miss anything?
it just doesn’t make sense to keep ignoring this patch for half year for no reason. Is there a way to voice up a about this? 




[-- Attachment #2: Type: text/html, Size: 6024 bytes --]

Re: [edk2-devel] 回复: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Sheng Lean Tan]

[-- Attachment #1: Type: text/plain, Size: 132 bytes --]

Thanks Liming and Ray for looking into this. It was really frustrating that no one bothers to reply after keep pinging for months.

[-- Attachment #2: Type: text/html, Size: 132 bytes --]

Re: [edk2-devel] 回复: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[Sheng Lean Tan]

[-- Attachment #1: Type: text/plain, Size: 49 bytes --]

Hi Liming/ Ray,
Could you help to merge?
Thanks.

[-- Attachment #2: Type: text/html, Size: 90 bytes --]

回复: [edk2-devel] 回复: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[gaoliming]

[-- Attachment #1: Type: text/plain, Size: 542 bytes --]

Tan:

 I rebase this PR https://github.com/tianocore/edk2/pull/4127 again. It will be merged now. 

 

Thanks

Liming

发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 Sheng Lean Tan
发送时间: 2023年3月16日 0:41
收件人: devel@edk2.groups.io; Ni, Ray <ray.ni@intel.com>
抄送: gaoliming <gaoliming@byosoft.com.cn>
主题: Re: [edk2-devel] 回复: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

 

Hi Liming/ Ray,

Could you help to merge?

Thanks.




[-- Attachment #2: Type: text/html, Size: 4358 bytes --]

回复: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

[gaoliming]

[-- Attachment #1: Type: text/plain, Size: 2242 bytes --]

PR https://github.com/tianocore/edk2/pull/4127 is created for this patch. 

 

Thanks

Liming

发件人: devel@edk2.groups.io <devel@edk2.groups.io> 代表 gaoliming via groups.io
发送时间: 2023年3月9日 8:55
收件人: devel@edk2.groups.io; ray.ni@intel.com; 'Tan, Lean Sheng' <sheng.tan@9elements.com>
抄送: 'Wang, Jian J' <jian.j.wang@intel.com>
主题: 回复: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

 

Ray:

 You also have access to merge the patch. Sure, I can help merge this patch. 

 

Thanks

Liming

发件人: devel@edk2.groups.io <mailto:devel@edk2.groups.io>  <devel@edk2.groups.io <mailto:devel@edk2.groups.io> > 代表 Ni, Ray
发送时间: 2023年3月8日 16:58
收件人: devel@edk2.groups.io <mailto:devel@edk2.groups.io> ; Tan, Lean Sheng <sheng.tan@9elements.com <mailto:sheng.tan@9elements.com> >
抄送: Wang, Jian J <jian.j.wang@intel.com <mailto:jian.j.wang@intel.com> >; Gao, Liming <gaoliming@byosoft.com.cn <mailto:gaoliming@byosoft.com.cn> >
主题: Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

 

M: Jian J Wang jian.j.wang@intel.com <mailto:jian.j.wang@intel.com>  [jwang36]

M: Liming Gao gaoliming@byosoft.com.cn <mailto:gaoliming@byosoft.com.cn>  [lgao4]

 

Jian and Liming are maintainers of MdeModulePkg.

The patch passed my review. Either of them can help to merge the patch.

 

I guess Liming might not see this patch. I am sure he can help on merging it.

 

 

Thanks,

Ray

 

From: devel@edk2.groups.io <mailto:devel@edk2.groups.io>  <devel@edk2.groups.io <mailto:devel@edk2.groups.io> > On Behalf Of Sheng Lean Tan
Sent: Wednesday, March 8, 2023 4:55 PM
To: Tan, Lean Sheng <sheng.tan@9elements.com <mailto:sheng.tan@9elements.com> >; devel@edk2.groups.io <mailto:devel@edk2.groups.io> 
Subject: Re: [edk2-devel] [PATCH 1/3] MdeModulePkg/BmBoot: Skip removable media if it is not present

 

Seriously, what is the hold up here?
did Sean not following the process? Did he miss anything?
it just doesn’t make sense to keep ignoring this patch for half year for no reason. Is there a way to voice up a about this? 




[-- Attachment #2: Type: text/html, Size: 8081 bytes --]