From: "annie li" <annie.li@oracle.com>
To: devel@edk2.groups.io
Cc: lersek@redhat.com, karl.heubaum@oracle.com, aaron.young@oracle.com
Subject: Re: [edk2-devel] [PATCH V2 1/1] OvmfPkg/OvmfPkg*.dsc: Increase ACPI Reclaim memory size
Date: Mon, 2 May 2022 17:05:26 -0400 [thread overview]
Message-ID: <184a69b4-5049-e55b-d50c-3253d7a14544@oracle.com> (raw)
In-Reply-To: <16E62E6A940424A8.9469@groups.io>
Hello
I am wondering if anyone will review this patch please? Any comments are
welcome.
Thanks
Annie
On 4/15/2022 5:15 PM, annie li wrote:
> The current ACPI Reclaim memory size is set as 0x10(64k). The
> ACPI table size will be increased if the memory slots' number of
> the guest gets increased. In the guest with more memory slots,
> the ACPI Reclaim memory size may not be sufficient for hibernation.
> This may cause resume failure of the hibernated guest that was
> booted up with a fresh copied writable OVMF_VARS file. However,
> the failure doesn't happen in following hibernation/resume
> cycles.
>
> The ACPI_MAX_RAM_SLOTS is set as 256 in the current QEMU. With
> ACPI_MAX_RAM_SLOTS, 18 pages are required to be allocated in ACPI
> Reclaim memory. However, due to the 0x10(16 pages) setting, 2 extra
> pages will be allocated in other space. This may break the
> hibernation/resume in the above scenario.
>
> This patch increases the ACPI Reclaim memory size to 0x12, i.e.
> PcdMemoryTypeEfiACPIReclaimMemory is set as 0x12(18 pages).
>
> Signed-off-by: Annie Li <annie.li@oracle.com>
> ---
> OvmfPkg/OvmfPkgIa32.dsc | 2 +-
> OvmfPkg/OvmfPkgIa32X64.dsc | 2 +-
> OvmfPkg/OvmfPkgX64.dsc | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/OvmfPkg/OvmfPkgIa32.dsc b/OvmfPkg/OvmfPkgIa32.dsc
> index 29eea82571..fb158f98c9 100644
> --- a/OvmfPkg/OvmfPkgIa32.dsc
> +++ b/OvmfPkg/OvmfPkgIa32.dsc
> @@ -547,7 +547,7 @@
> # unknown) workloads / boot paths.
>
> #
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0x80
>
> - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0x10
>
> + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0x12
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0x80
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|0x100
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|0x100
>
> diff --git a/OvmfPkg/OvmfPkgIa32X64.dsc b/OvmfPkg/OvmfPkgIa32X64.dsc
> index 56d3c49ab2..30d47ca28a 100644
> --- a/OvmfPkg/OvmfPkgIa32X64.dsc
> +++ b/OvmfPkg/OvmfPkgIa32X64.dsc
> @@ -552,7 +552,7 @@
> # unknown) workloads / boot paths.
>
> #
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0x80
>
> - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0x10
>
> + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0x12
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0x80
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|0x100
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|0x100
>
> diff --git a/OvmfPkg/OvmfPkgX64.dsc b/OvmfPkg/OvmfPkgX64.dsc
> index f0924c0f9d..6c10ceedd7 100644
> --- a/OvmfPkg/OvmfPkgX64.dsc
> +++ b/OvmfPkg/OvmfPkgX64.dsc
> @@ -552,7 +552,7 @@
> # unknown) workloads / boot paths.
>
> #
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0x80
>
> - gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0x10
>
> + gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0x12
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0x80
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|0x100
>
> gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|0x100
>
next parent reply other threads:[~2022-05-02 21:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <16E62E6A940424A8.9469@groups.io>
2022-05-02 21:05 ` annie li [this message]
[not found] ` <16EB65B9C6B20F3F.8534@groups.io>
2022-05-03 15:54 ` [edk2-devel] [PATCH V2 1/1] OvmfPkg/OvmfPkg*.dsc: Increase ACPI Reclaim memory size annie li
2022-05-03 16:25 ` Ard Biesheuvel
2022-05-13 11:28 ` annie li
2022-07-22 12:42 ` annie li
2022-09-06 16:56 ` Ard Biesheuvel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=184a69b4-5049-e55b-d50c-3253d7a14544@oracle.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox