* edk2 compile error
@ 2016-09-18 3:38 Chen, Farrah
2016-09-18 15:45 ` Andrew Fish
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Chen, Farrah @ 2016-09-18 3:38 UTC (permalink / raw)
To: 'edk2-devel@ml01.01.org'
Cc: 'wei.liu2@citrix.com', Hao, Xudong,
'xen-devel@lists.xen.org'
Hi,
When I compile xen with the latest commit in RHEL 6.7, it failed when make tools. Errors showed when running edk2 build for OvmfPkgX64.
Bisected and this error occurred from commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2.
commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2
Author: Wei Liu <wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>>
Date: Tue Sep 6 12:54:47 2016 +0100
Config.mk: update OVMF commit
Signed-off-by: Wei Liu wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>
We have updated OVMF to the latest master and cleaned everything before rebuilding.
Steps:
make clean
make xen -j8
./configure --enable-ovmf
make tools -j8
Then the error occurred.
I also tried:
git clone https://github.com/tianocore/edk2.git
cd edk2
OvmfPkg/build.sh -a X64 -b DEBUG -n 4
The same error occurred.
.........................................................................................................................................................
log:
......
Running edk2 build for OvmfPkgX64
......
/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:173: error: invalid combination of opcode and operands
/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:175: error: invalid combination of opcode and operands
/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:177: error: invalid combination of opcode and operands
/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:179: error: invalid combination of opcode and operands
/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:313: error: invalid combination of opcode and operands
/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:315: error: invalid combination of opcode and operands
make[7]: Leaving directory `/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib'
make[7]: *** [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.obj] Error 1
build.py...
: error 7000: Failed to execute command
make tbuild [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib]
build.py...
: error F002: Failed to build module
/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf [X64, GCC44, DEBUG]
- Failed -
Thanks,
Fan Chen
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: edk2 compile error
2016-09-18 3:38 edk2 compile error Chen, Farrah
@ 2016-09-18 15:45 ` Andrew Fish
2016-09-19 0:29 ` Chen, Farrah
2016-09-19 10:51 ` Wei Liu
2016-09-19 10:59 ` Laszlo Ersek
2 siblings, 1 reply; 6+ messages in thread
From: Andrew Fish @ 2016-09-18 15:45 UTC (permalink / raw)
To: Chen, Farrah; +Cc: edk2-devel@ml01.01.org, xen-devel@lists.xen.org
> On Sep 17, 2016, at 8:38 PM, Chen, Farrah <farrah.chen@intel.com> wrote:
>
> Hi,
>
> When I compile xen with the latest commit in RHEL 6.7, it failed when make tools. Errors showed when running edk2 build for OvmfPkgX64.
> Bisected and this error occurred from commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2.
>
> commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2
> Author: Wei Liu <wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>>
> Date: Tue Sep 6 12:54:47 2016 +0100
>
> Config.mk: update OVMF commit
>
> Signed-off-by: Wei Liu wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>
>
>
> We have updated OVMF to the latest master and cleaned everything before rebuilding.
>
>
>
> Steps:
>
> make clean
>
> make xen -j8
>
> ./configure --enable-ovmf
>
> make tools -j8
>
> Then the error occurred.
>
>
>
>
>
> I also tried:
>
> git clone https://github.com/tianocore/edk2.git
>
> cd edk2
>
> OvmfPkg/build.sh -a X64 -b DEBUG -n 4
> The same error occurred.
> .........................................................................................................................................................
>
> log:
> ......
> Running edk2 build for OvmfPkgX64
> ......
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:173: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:175: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:177: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:179: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:313: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:315: error: invalid combination of opcode and operands
Can you attach a copy of the failing ExceptionHandlerAsm.iii as it is the output of the preprocessor.
Thanks,
Andrew Fish
> make[7]: Leaving directory `/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib'
> make[7]: *** [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.obj] Error 1
>
>
> build.py...
> : error 7000: Failed to execute command
> make tbuild [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib]
>
>
> build.py...
> : error F002: Failed to build module
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf [X64, GCC44, DEBUG]
>
> - Failed -
>
>
> Thanks,
> Fan Chen
>
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: edk2 compile error
2016-09-18 15:45 ` Andrew Fish
@ 2016-09-19 0:29 ` Chen, Farrah
0 siblings, 0 replies; 6+ messages in thread
From: Chen, Farrah @ 2016-09-19 0:29 UTC (permalink / raw)
To: afish@apple.com
Cc: edk2-devel@ml01.01.org, xen-devel@lists.xen.org, Hao, Xudong
FYI.
Thanks,
Fan Chen
-----Original Message-----
From: afish@apple.com [mailto:afish@apple.com]
Sent: Sunday, September 18, 2016 11:45 PM
To: Chen, Farrah <farrah.chen@intel.com>
Cc: edk2-devel@ml01.01.org; xen-devel@lists.xen.org
Subject: Re: [edk2] edk2 compile error
> On Sep 17, 2016, at 8:38 PM, Chen, Farrah <farrah.chen@intel.com> wrote:
>
> Hi,
>
> When I compile xen with the latest commit in RHEL 6.7, it failed when make tools. Errors showed when running edk2 build for OvmfPkgX64.
> Bisected and this error occurred from commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2.
>
> commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2
> Author: Wei Liu <wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>>
> Date: Tue Sep 6 12:54:47 2016 +0100
>
> Config.mk: update OVMF commit
>
> Signed-off-by: Wei Liu wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>
>
>
> We have updated OVMF to the latest master and cleaned everything before rebuilding.
>
>
>
> Steps:
>
> make clean
>
> make xen -j8
>
> ./configure --enable-ovmf
>
> make tools -j8
>
> Then the error occurred.
>
>
>
>
>
> I also tried:
>
> git clone https://github.com/tianocore/edk2.git
>
> cd edk2
>
> OvmfPkg/build.sh -a X64 -b DEBUG -n 4
> The same error occurred.
> .........................................................................................................................................................
>
> log:
> ......
> Running edk2 build for OvmfPkgX64
> ......
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:173: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:175: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:177: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:179: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:313: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:315: error: invalid combination of opcode and operands
Can you attach a copy of the failing ExceptionHandlerAsm.iii as it is the output of the preprocessor.
Thanks,
Andrew Fish
> make[7]: Leaving directory `/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib'
> make[7]: *** [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.obj] Error 1
>
>
> build.py...
> : error 7000: Failed to execute command
> make tbuild [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib]
>
>
> build.py...
> : error F002: Failed to build module
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf [X64, GCC44, DEBUG]
>
> - Failed -
>
>
> Thanks,
> Fan Chen
>
>
> _______________________________________________
> edk2-devel mailing list
> edk2-devel@lists.01.org
> https://lists.01.org/mailman/listinfo/edk2-devel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: edk2 compile error
2016-09-18 3:38 edk2 compile error Chen, Farrah
2016-09-18 15:45 ` Andrew Fish
@ 2016-09-19 10:51 ` Wei Liu
2016-09-19 10:59 ` Laszlo Ersek
2 siblings, 0 replies; 6+ messages in thread
From: Wei Liu @ 2016-09-19 10:51 UTC (permalink / raw)
To: Chen, Farrah
Cc: 'edk2-devel@ml01.01.org', 'wei.liu2@citrix.com',
Hao, Xudong, 'xen-devel@lists.xen.org'
Hi all
In order to make things clearer: this seems to be a problem in upstream
EDK2. Xen Project only tracks upstream, no additional patch is added on
top.
So, I deleted the irrelevant bits below.
On Sun, Sep 18, 2016 at 03:38:19AM +0000, Chen, Farrah wrote:
> I also tried:
>
> git clone https://github.com/tianocore/edk2.git
>
> cd edk2
>
> OvmfPkg/build.sh -a X64 -b DEBUG -n 4
> The same error occurred.
> .........................................................................................................................................................
>
> log:
> ......
> Running edk2 build for OvmfPkgX64
> ......
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:173: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:175: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:177: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:179: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:313: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:315: error: invalid combination of opcode and operands
> make[7]: Leaving directory `/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib'
> make[7]: *** [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.obj] Error 1
>
>
> build.py...
> : error 7000: Failed to execute command
> make tbuild [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib]
>
>
> build.py...
> : error F002: Failed to build module
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf [X64, GCC44, DEBUG]
>
> - Failed -
>
>
> Thanks,
> Fan Chen
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: edk2 compile error
2016-09-18 3:38 edk2 compile error Chen, Farrah
2016-09-18 15:45 ` Andrew Fish
2016-09-19 10:51 ` Wei Liu
@ 2016-09-19 10:59 ` Laszlo Ersek
2016-09-20 7:19 ` Chen, Farrah
2 siblings, 1 reply; 6+ messages in thread
From: Laszlo Ersek @ 2016-09-19 10:59 UTC (permalink / raw)
To: Chen, Farrah, 'edk2-devel@ml01.01.org'
Cc: 'xen-devel@lists.xen.org'
On 09/18/16 05:38, Chen, Farrah wrote:
> Hi,
>
> When I compile xen with the latest commit in RHEL 6.7, it failed when make tools. Errors showed when running edk2 build for OvmfPkgX64.
> Bisected and this error occurred from commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2.
>
> commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2
> Author: Wei Liu <wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>>
> Date: Tue Sep 6 12:54:47 2016 +0100
>
> Config.mk: update OVMF commit
>
> Signed-off-by: Wei Liu wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>
>
>
> We have updated OVMF to the latest master and cleaned everything before rebuilding.
>
>
>
> Steps:
>
> make clean
>
> make xen -j8
>
> ./configure --enable-ovmf
>
> make tools -j8
>
> Then the error occurred.
>
>
>
>
>
> I also tried:
>
> git clone https://github.com/tianocore/edk2.git
>
> cd edk2
>
> OvmfPkg/build.sh -a X64 -b DEBUG -n 4
> The same error occurred.
> .........................................................................................................................................................
>
> log:
> ......
> Running edk2 build for OvmfPkgX64
> ......
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:173: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:175: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:177: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:179: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:313: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.iii:315: error: invalid combination of opcode and operands
> make[7]: Leaving directory `/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib'
> make[7]: *** [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandlerAsm.obj] Error 1
>
>
> build.py...
> : error 7000: Failed to execute command
> make tbuild [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib]
>
>
> build.py...
> : error F002: Failed to build module
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib.inf [X64, GCC44, DEBUG]
>
> - Failed -
RHEL-6 does not have a nasm version that is recent enough to build edk2.
RHEL-6 ships nasm-2.07-*, but edk2 requires nasm-2.10 or later with the
GCC toolchain family.
Please see this mailing list thread:
https://www.mail-archive.com/edk2-devel@lists.01.org/msg14420.html
And the resultant docs commit:
https://github.com/tianocore/edk2/commit/9c4dbdff1d56
... Before anyone suggests otherwise, this was not a gratuitous version
requirement bump. The edk2 assembly code had already been there, the
nasm version bump only documented the status, after the fact.
For RHEL-6 specifically, I suggest to grab a recent enough nasm SRPM
from Fedora Koji, and rebuild / install that locally. Better yet, I
recommend upgrading to RHEL-7, whose nasm is good enough.
Thanks
Laszlo
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: edk2 compile error
2016-09-19 10:59 ` Laszlo Ersek
@ 2016-09-20 7:19 ` Chen, Farrah
0 siblings, 0 replies; 6+ messages in thread
From: Chen, Farrah @ 2016-09-20 7:19 UTC (permalink / raw)
To: Laszlo Ersek, 'edk2-devel@ml01.01.org'
Cc: 'xen-devel@lists.xen.org', Olaf Hering,
wei.liu2@citrix.com
Hi All,
Thank you. I installed nasm-2.12.02 and it workd. We will upgrade to RHEL-7 soon.
Thanks
Fan Chen
-----Original Message-----
From: Laszlo Ersek [mailto:lersek@redhat.com]
Sent: Monday, September 19, 2016 7:00 PM
To: Chen, Farrah <farrah.chen@intel.com>; 'edk2-devel@ml01.01.org' <edk2-devel@ml01.01.org>
Cc: 'xen-devel@lists.xen.org' <xen-devel@lists.xen.org>
Subject: Re: [edk2] edk2 compile error
On 09/18/16 05:38, Chen, Farrah wrote:
> Hi,
>
> When I compile xen with the latest commit in RHEL 6.7, it failed when make tools. Errors showed when running edk2 build for OvmfPkgX64.
> Bisected and this error occurred from commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2.
>
> commit 8c8b6fb02342f7aa78e611a5f0f63dcf8fbf48f2
> Author: Wei Liu <wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>>
> Date: Tue Sep 6 12:54:47 2016 +0100
>
> Config.mk: update OVMF commit
>
> Signed-off-by: Wei Liu wei.liu2@citrix.com<mailto:wei.liu2@citrix.com>
>
>
> We have updated OVMF to the latest master and cleaned everything before rebuilding.
>
>
>
> Steps:
>
> make clean
>
> make xen -j8
>
> ./configure --enable-ovmf
>
> make tools -j8
>
> Then the error occurred.
>
>
>
>
>
> I also tried:
>
> git clone https://github.com/tianocore/edk2.git
>
> cd edk2
>
> OvmfPkg/build.sh -a X64 -b DEBUG -n 4
> The same error occurred.
> .........................................................................................................................................................
>
> log:
> ......
> Running edk2 build for OvmfPkgX64
> ......
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware
> /ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuE
> xceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandl
> erAsm.iii:173: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware
> /ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuE
> xceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandl
> erAsm.iii:175: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware
> /ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuE
> xceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandl
> erAsm.iii:177: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware
> /ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuE
> xceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandl
> erAsm.iii:179: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware
> /ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuE
> xceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandl
> erAsm.iii:313: error: invalid combination of opcode and operands
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware
> /ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuE
> xceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHandl
> erAsm.iii:315: error: invalid combination of opcode and operands
> make[7]: Leaving directory `/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExceptionHandlerLib'
> make[7]: ***
> [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmwar
> e/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/Cpu
> ExceptionHandlerLib/DxeCpuExceptionHandlerLib/OUTPUT/X64/ExceptionHand
> lerAsm.obj] Error 1
>
>
> build.py...
> : error 7000: Failed to execute command
> make tbuild
> [/home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmwar
> e/ovmf-dir-remote/Build/OvmfX64/DEBUG_GCC44/X64/UefiCpuPkg/Library/Cpu
> ExceptionHandlerLib/DxeCpuExceptionHandlerLib]
>
>
> build.py...
> : error F002: Failed to build module
>
> /home/www/builds_xen_unstable/xen-src-8c8b6fb0-20160912/tools/firmware
> /ovmf-dir-remote/UefiCpuPkg/Library/CpuExceptionHandlerLib/DxeCpuExcep
> tionHandlerLib.inf [X64, GCC44, DEBUG]
>
> - Failed -
RHEL-6 does not have a nasm version that is recent enough to build edk2.
RHEL-6 ships nasm-2.07-*, but edk2 requires nasm-2.10 or later with the GCC toolchain family.
Please see this mailing list thread:
https://www.mail-archive.com/edk2-devel@lists.01.org/msg14420.html
And the resultant docs commit:
https://github.com/tianocore/edk2/commit/9c4dbdff1d56
... Before anyone suggests otherwise, this was not a gratuitous version requirement bump. The edk2 assembly code had already been there, the nasm version bump only documented the status, after the fact.
For RHEL-6 specifically, I suggest to grab a recent enough nasm SRPM from Fedora Koji, and rebuild / install that locally. Better yet, I recommend upgrading to RHEL-7, whose nasm is good enough.
Thanks
Laszlo
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-09-20 7:19 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-09-18 3:38 edk2 compile error Chen, Farrah
2016-09-18 15:45 ` Andrew Fish
2016-09-19 0:29 ` Chen, Farrah
2016-09-19 10:51 ` Wei Liu
2016-09-19 10:59 ` Laszlo Ersek
2016-09-20 7:19 ` Chen, Farrah
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox