From: "Giri Mudusuru" <girim@apple.com>
To: gaoliming <gaoliming@byosoft.com.cn>
Cc: devel@edk2.groups.io,
Michael D Kinney <michael.d.kinney@intel.com>,
Zhiguang Liu <zhiguang.liu@intel.com>,
Andrew Fish <afish@apple.com>, Giri Mudusuru <girim@apple.com>
Subject: Re: [PATCH] MdePkg Include: Fix typos
Date: Wed, 17 May 2023 23:50:08 +0530 [thread overview]
Message-ID: <1E3AB2AE-9862-4E35-97A4-135B3E911E7F@apple.com> (raw)
In-Reply-To: <001001d98794$79215f00$6b641d00$@byosoft.com.cn>
Hi Liming,
Most of the errors except below macro are in comments. Not sure if CI SpellCheck is skipping comments?
I can revert the macro fix from this patch. I noticed that it is duplicated in Acpi.h and Acpi10.h.
Thanks,
-Giri
> On May 16, 2023, at 6:49 AM, gaoliming <gaoliming@byosoft.com.cn> wrote:
>
> Giri:
> Edk2 CI enables SpellCheck. Seemly, those typos are not detected by CI. So, I want to confirm which tool do you use.
>
> This patch is good. But, the first changes the existing MACRO name. I am not sure whether there is any code impact.
>
> Thanks
> Liming
>> -----邮件原件-----
>> 发件人: Giri Mudusuru <girim@apple.com>
>> 发送时间: 2023年5月15日 10:49
>> 收件人: gaoliming <gaoliming@byosoft.com.cn>
>> 抄送: devel@edk2.groups.io; Michael D Kinney
>> <michael.d.kinney@intel.com>; Zhiguang Liu <zhiguang.liu@intel.com>;
>> Andrew Fish <afish@apple.com>; Giri Mudusuru <girim@apple.com>
>> 主题: Re: [PATCH] MdePkg Include: Fix typos
>>
>> Hi Liming,
>>
>> These typos are found during reviews, sync with open source and other debug.
>> Just kept running list and then a simple search and replace in repo.
>>
>> I have fix for other packages too, just starting with MdePkg to get some
>> feedback on size of patch (number of files etc)
>>
>> I am using VS Code IDE with Code Spell Checker plugin which highlights any
>> typos.
>>
>> Thanks,
>> -Giri
>>
>>> On May 15, 2023, at 7:10 AM, gaoliming <gaoliming@byosoft.com.cn>
>> wrote:
>>>
>>> Giri:
>>> How do you find these typos? Which tool do you use to scan the code?
>>>
>>> Thanks
>>> Liming
>>>> -----邮件原件-----
>>>> 发件人: Giri Mudusuru <girim@apple.com>
>>>> 发送时间: 2023年5月12日 18:25
>>>> 收件人: devel@edk2.groups.io
>>>> 抄送: Giri Mudusuru <girim@apple.com>; Michael D Kinney
>>>> <michael.d.kinney@intel.com>; Liming Gao <gaoliming@byosoft.com.cn>;
>>>> Zhiguang Liu <zhiguang.liu@intel.com>; Andrew Fish <afish@apple.com>
>>>> 主题: [PATCH] MdePkg Include: Fix typos
>>>>
>>>> compatability->compatibility
>>>> EFI_MEDIA_CHNAGED->EFI_MEDIA_CHANGED
>>>> Funtion->Function
>>>> exhausive->exhaustive
>>>> Propery->Property
>>>> StartAdress->StartAddress
>>>> sucessful->successful
>>>> writting->writing
>>>>
>>>> Cc: Michael D Kinney <michael.d.kinney@intel.com>
>>>> Cc: Liming Gao <gaoliming@byosoft.com.cn>
>>>> Cc: Zhiguang Liu <zhiguang.liu@intel.com>
>>>> Cc: Andrew Fish <afish@apple.com>
>>>> Signed-off-by: Giri Mudusuru <girim@apple.com>
>>>> ---
>>>> MdePkg/Include/IndustryStandard/Acpi10.h | 2 +-
>>>> MdePkg/Include/Library/DebugLib.h | 50
>>>> +++++++++----------
>>>> MdePkg/Include/Library/PerformanceLib.h | 2 +-
>>>> MdePkg/Include/Library/PostCodeLib.h | 12 ++---
>>>> MdePkg/Include/Library/ReportStatusCodeLib.h | 26 +++++-----
>>>> MdePkg/Include/Library/S3PciLib.h | 4 +-
>>>> MdePkg/Include/Library/S3PciSegmentLib.h | 4 +-
>>>> MdePkg/Include/Library/UefiLib.h | 2 +-
>>>> MdePkg/Include/Protocol/BlockIo.h | 4 +-
>>>> MdePkg/Include/Protocol/BlockIo2.h | 6 +--
>>>> MdePkg/Include/Protocol/BlockIoCrypto.h | 2 +-
>>>> MdePkg/Include/Protocol/DiskIo.h | 4 +-
>>>> MdePkg/Include/Protocol/DiskIo2.h | 6 +--
>>>> MdePkg/Include/Protocol/Ip4.h | 4 +-
>>>> MdePkg/Include/Protocol/Ip6.h | 4 +-
>>>> .../Protocol/NetworkInterfaceIdentifier.h | 4 +-
>>>> MdePkg/Include/Protocol/Pkcs7Verify.h | 2 +-
>>>> MdePkg/Include/Protocol/RamDisk.h | 2 +-
>>>> MdePkg/Include/Protocol/ScsiIo.h | 2 +-
>>>> MdePkg/Include/Protocol/ScsiPassThru.h | 2 +-
>>>> MdePkg/Include/Protocol/ServiceBinding.h | 2 +-
>>>> MdePkg/Include/Protocol/Shell.h | 2 +-
>>>> MdePkg/Include/Protocol/ShellDynamicCommand.h | 2 +-
>>>> MdePkg/Include/Protocol/Tcp4.h | 4 +-
>>>> MdePkg/Include/Protocol/Tcp6.h | 4 +-
>>>> MdePkg/Include/Protocol/Udp4.h | 4 +-
>>>> MdePkg/Include/Protocol/Udp6.h | 4 +-
>>>> MdePkg/Include/Protocol/UfsDeviceConfig.h | 2 +-
>>>> MdePkg/Include/Protocol/UgaDraw.h | 2 +-
>>>> MdePkg/Include/Protocol/Usb2HostController.h | 2 +-
>>>> MdePkg/Include/Protocol/UsbHostController.h | 2 +-
>>>> 31 files changed, 87 insertions(+), 87 deletions(-)
>>>>
>>>> diff --git a/MdePkg/Include/IndustryStandard/Acpi10.h
>>>> b/MdePkg/Include/IndustryStandard/Acpi10.h
>>>> index 9cc02edb3e..5a47f8a54c 100644
>>>> --- a/MdePkg/Include/IndustryStandard/Acpi10.h
>>>> +++ b/MdePkg/Include/IndustryStandard/Acpi10.h
>>>> @@ -321,7 +321,7 @@ typedef struct {
>>>> #define
>>>>
>> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_MEMOR
>>>> Y (0 << 3)
>>>>
>>>> #define
>>>>
>> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_RESERV
>>>> ED (1 << 3)
>>>>
>>>> #define
>>>> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_ACPI
>>>> (2 << 3)
>>>>
>>>> -#define
>>>> EFI_APCI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_NVS
>>>> (3 << 3)
>>>>
>>>> +#define
>>>> EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_ADDRESS_RANGE_NVS
>>>> (3 << 3)
>>>>
>>>> //
>>>>
>>>> // Bit [5] : Memory to I/O Translation, _TTP
>>>>
>>>> //
>>>>
>>>> diff --git a/MdePkg/Include/Library/DebugLib.h
>>>> b/MdePkg/Include/Library/DebugLib.h
>>>> index f0c9f64487..56c9e0c781 100644
>>>> --- a/MdePkg/Include/Library/DebugLib.h
>>>> +++ b/MdePkg/Include/Library/DebugLib.h
>>>> @@ -185,8 +185,8 @@ DebugBPrint (
>>>>
>>>>
>>>> Print a message of the form "ASSERT <FileName>(<LineNumber>):
>>>> <Description>\n"
>>>>
>>>> to the debug output device. If
>>>> DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of
>>>>
>>>> - PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise,
>>> if
>>>>
>>>> - DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of
>>>> PcdDebugProperyMask is set then
>>>>
>>>> + PcdDebugPropertyMask is set then CpuBreakpoint() is called.
>> Otherwise,
>>> if
>>>>
>>>> + DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of
>>>> PcdDebugPropertyMask is set then
>>>>
>>>> CpuDeadLoop() is called. If neither of these bits are set, then this
>>>> function
>>>>
>>>> returns immediately after the message is printed to the debug output
>>>> device.
>>>>
>>>> DebugAssert() must actively prevent recursion. If DebugAssert() is
>>> called
>>>> while
>>>>
>>>> @@ -234,10 +234,10 @@ DebugClearMemory (
>>>> Returns TRUE if ASSERT() macros are enabled.
>>>>
>>>>
>>>>
>>>> This function returns TRUE if the
>>>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of
>>>>
>>>> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
>>>>
>>>> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
>>>>
>>>>
>>>>
>>>> - @retval TRUE The
>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>>>> bit of PcdDebugProperyMask is set.
>>>>
>>>> - @retval FALSE The
>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>>>> bit of PcdDebugProperyMask is clear.
>>>>
>>>> + @retval TRUE The
>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>>>> bit of PcdDebugPropertyMask is set.
>>>>
>>>> + @retval FALSE The
>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>>>> bit of PcdDebugPropertyMask is clear.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> BOOLEAN
>>>>
>>>> @@ -250,10 +250,10 @@ DebugAssertEnabled (
>>>> Returns TRUE if DEBUG() macros are enabled.
>>>>
>>>>
>>>>
>>>> This function returns TRUE if the
>>>> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of
>>>>
>>>> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
>>>>
>>>> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
>>>>
>>>>
>>>>
>>>> - @retval TRUE The
>> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
>>>> bit of PcdDebugProperyMask is set.
>>>>
>>>> - @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
>> bit
>>>> of PcdDebugProperyMask is clear.
>>>>
>>>> + @retval TRUE The
>> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
>>>> bit of PcdDebugPropertyMask is set.
>>>>
>>>> + @retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
>> bit
>>>> of PcdDebugPropertyMask is clear.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> BOOLEAN
>>>>
>>>> @@ -266,10 +266,10 @@ DebugPrintEnabled (
>>>> Returns TRUE if DEBUG_CODE() macros are enabled.
>>>>
>>>>
>>>>
>>>> This function returns TRUE if the
>>>> DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
>>>>
>>>> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
>>>>
>>>> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
>>>>
>>>>
>>>>
>>>> - @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED
>> bit
>>>> of PcdDebugProperyMask is set.
>>>>
>>>> - @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED
>> bit
>>>> of PcdDebugProperyMask is clear.
>>>>
>>>> + @retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED
>>>> bit of PcdDebugPropertyMask is set.
>>>>
>>>> + @retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED
>> bit
>>>> of PcdDebugPropertyMask is clear.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> BOOLEAN
>>>>
>>>> @@ -282,10 +282,10 @@ DebugCodeEnabled (
>>>> Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.
>>>>
>>>>
>>>>
>>>> This function returns TRUE if the
>>>> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
>>>>
>>>> - PcdDebugProperyMask is set. Otherwise, FALSE is returned.
>>>>
>>>> + PcdDebugPropertyMask is set. Otherwise, FALSE is returned.
>>>>
>>>>
>>>>
>>>> - @retval TRUE The
>> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
>>>> bit of PcdDebugProperyMask is set.
>>>>
>>>> - @retval FALSE The
>> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
>>>> bit of PcdDebugProperyMask is clear.
>>>>
>>>> + @retval TRUE The
>>>> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
>>>> PcdDebugPropertyMask is set.
>>>>
>>>> + @retval FALSE The
>> DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED
>>>> bit of PcdDebugPropertyMask is clear.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> BOOLEAN
>>>>
>>>> @@ -384,7 +384,7 @@ UnitTestDebugAssert (
>>>> Macro that calls DebugAssert() if an expression evaluates to FALSE.
>>>>
>>>>
>>>>
>>>> If MDEPKG_NDEBUG is not defined and the
>>>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>>>>
>>>> - bit of PcdDebugProperyMask is set, then this macro evaluates the
>>> Boolean
>>>>
>>>> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
>>>> Boolean
>>>>
>>>> expression specified by Expression. If Expression evaluates to FALSE,
>>>> then
>>>>
>>>> DebugAssert() is called passing in the source filename, source line
>>> number,
>>>>
>>>> and Expression.
>>>>
>>>> @@ -410,7 +410,7 @@ UnitTestDebugAssert (
>>>> Macro that calls DebugPrint().
>>>>
>>>>
>>>>
>>>> If MDEPKG_NDEBUG is not defined and the
>>>> DEBUG_PROPERTY_DEBUG_PRINT_ENABLED
>>>>
>>>> - bit of PcdDebugProperyMask is set, then this macro passes Expression
>> to
>>>>
>>>> + bit of PcdDebugPropertyMask is set, then this macro passes Expression
>>> to
>>>>
>>>> DebugPrint().
>>>>
>>>>
>>>>
>>>> @param Expression Expression containing an error level, a format
>>>> string,
>>>>
>>>> @@ -433,7 +433,7 @@ UnitTestDebugAssert (
>>>> Macro that calls DebugAssert() if an EFI_STATUS evaluates to an error
>>>> code.
>>>>
>>>>
>>>>
>>>> If MDEPKG_NDEBUG is not defined and the
>>>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>>>>
>>>> - bit of PcdDebugProperyMask is set, then this macro evaluates the
>>>> EFI_STATUS
>>>>
>>>> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
>>>> EFI_STATUS
>>>>
>>>> value specified by StatusParameter. If StatusParameter is an error
>>> code,
>>>>
>>>> then DebugAssert() is called passing in the source filename, source
>>> line
>>>>
>>>> number, and StatusParameter.
>>>>
>>>> @@ -459,7 +459,7 @@ UnitTestDebugAssert (
>>>> Macro that calls DebugAssert() if a RETURN_STATUS evaluates to an
>> error
>>>> code.
>>>>
>>>>
>>>>
>>>> If MDEPKG_NDEBUG is not defined and the
>>>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>>>>
>>>> - bit of PcdDebugProperyMask is set, then this macro evaluates the
>>>>
>>>> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
>>>>
>>>> RETURN_STATUS value specified by StatusParameter. If
>>>> StatusParameter is an
>>>>
>>>> error code, then DebugAssert() is called passing in the source
>>> filename,
>>>>
>>>> source line number, and StatusParameter.
>>>>
>>>> @@ -487,7 +487,7 @@ UnitTestDebugAssert (
>>>> handle database.
>>>>
>>>>
>>>>
>>>> If MDEPKG_NDEBUG is defined or the
>>>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit
>>>>
>>>> - of PcdDebugProperyMask is clear, then return.
>>>>
>>>> + of PcdDebugPropertyMask is clear, then return.
>>>>
>>>>
>>>>
>>>> If Handle is NULL, then a check is made to see if the protocol
>>> specified by
>>>> Guid
>>>>
>>>> is present on any handle in the handle database. If Handle is not
>>> NULL,
>>>> then
>>>>
>>>> @@ -528,7 +528,7 @@ UnitTestDebugAssert (
>>>> /**
>>>>
>>>> Macro that marks the beginning of debug source code.
>>>>
>>>>
>>>>
>>>> - If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
>>>> PcdDebugProperyMask is set,
>>>>
>>>> + If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
>>>> PcdDebugPropertyMask is set,
>>>>
>>>> then this macro marks the beginning of source code that is included in
>>> a
>>>> module.
>>>>
>>>> Otherwise, the source lines between DEBUG_CODE_BEGIN() and
>>>> DEBUG_CODE_END()
>>>>
>>>> are not included in a module.
>>>>
>>>> @@ -539,7 +539,7 @@ UnitTestDebugAssert (
>>>> /**
>>>>
>>>> The macro that marks the end of debug source code.
>>>>
>>>>
>>>>
>>>> - If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
>>>> PcdDebugProperyMask is set,
>>>>
>>>> + If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
>>>> PcdDebugPropertyMask is set,
>>>>
>>>> then this macro marks the end of source code that is included in a
>>> module.
>>>>
>>>> Otherwise, the source lines between DEBUG_CODE_BEGIN() and
>>>> DEBUG_CODE_END()
>>>>
>>>> are not included in a module.
>>>>
>>>> @@ -550,7 +550,7 @@ UnitTestDebugAssert (
>>>> /**
>>>>
>>>> The macro that declares a section of debug source code.
>>>>
>>>>
>>>>
>>>> - If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
>>>> PcdDebugProperyMask is set,
>>>>
>>>> + If the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of
>>>> PcdDebugPropertyMask is set,
>>>>
>>>> then the source code specified by Expression is included in a module.
>>>>
>>>> Otherwise, the source specified by Expression is not included in a
>>> module.
>>>>
>>>>
>>>>
>>>> @@ -563,7 +563,7 @@ UnitTestDebugAssert (
>>>> /**
>>>>
>>>> The macro that calls DebugClearMemory() to clear a buffer to a default
>>>> value.
>>>>
>>>>
>>>>
>>>> - If the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
>>>> PcdDebugProperyMask is set,
>>>>
>>>> + If the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of
>>>> PcdDebugPropertyMask is set,
>>>>
>>>> then this macro calls DebugClearMemory() passing in Address and
>> Length.
>>>>
>>>>
>>>>
>>>> @param Address The pointer to a buffer.
>>>>
>>>> @@ -586,13 +586,13 @@ UnitTestDebugAssert (
>>>> public data structure to retrieve a pointer to the private data
>>> structure.
>>>>
>>>>
>>>>
>>>> If MDEPKG_NDEBUG is defined or the
>>>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit
>>>>
>>>> - of PcdDebugProperyMask is clear, then this macro computes the offset,
>>> in
>>>> bytes,
>>>>
>>>> + of PcdDebugPropertyMask is clear, then this macro computes the
>> offset,
>>> in
>>>> bytes,
>>>>
>>>> of the field specified by Field from the beginning of the data
>>> structure
>>>> specified
>>>>
>>>> by TYPE. This offset is subtracted from Record, and is used to return
>>> a
>>>> pointer
>>>>
>>>> to a data structure of the type specified by TYPE.
>>>>
>>>>
>>>>
>>>> If MDEPKG_NDEBUG is not defined and the
>>>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit
>>>>
>>>> - of PcdDebugProperyMask is set, then this macro computes the offset, in
>>>> bytes,
>>>>
>>>> + of PcdDebugPropertyMask is set, then this macro computes the offset,
>> in
>>>> bytes,
>>>>
>>>> of field specified by Field from the beginning of the data structure
>>>> specified
>>>>
>>>> by TYPE. This offset is subtracted from Record, and is used to compute
>>> a
>>>> pointer
>>>>
>>>> to a data structure of the type specified by TYPE. The Signature field
>>> of
>>>> the
>>>>
>>>> diff --git a/MdePkg/Include/Library/PerformanceLib.h
>>>> b/MdePkg/Include/Library/PerformanceLib.h
>>>> index d0f2dfb070..24e60d33d1 100644
>>>> --- a/MdePkg/Include/Library/PerformanceLib.h
>>>> +++ b/MdePkg/Include/Library/PerformanceLib.h
>>>> @@ -10,7 +10,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
>>>> #define __PERFORMANCE_LIB_H__
>>>>
>>>>
>>>>
>>>> ///
>>>>
>>>> -/// Performance library propery mask bits
>>>>
>>>> +/// Performance library property mask bits
>>>>
>>>> ///
>>>>
>>>> #define PERFORMANCE_LIBRARY_PROPERTY_MEASUREMENT_ENABLED
>>>> 0x00000001
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Library/PostCodeLib.h
>>>> b/MdePkg/Include/Library/PostCodeLib.h
>>>> index 80628d7999..5fd6ab3b36 100644
>>>> --- a/MdePkg/Include/Library/PostCodeLib.h
>>>> +++ b/MdePkg/Include/Library/PostCodeLib.h
>>>> @@ -74,9 +74,9 @@ PostCodeWithDescription (
>>>> bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
>>>>
>>>>
>>>>
>>>> @retval TRUE The
>> POST_CODE_PROPERTY_POST_CODE_ENABLED
>>>> bit of
>>>>
>>>> - PcdPostCodeProperyMask is set.
>>>>
>>>> + PcdPostCodePropertyMask is set.
>>>>
>>>> @retval FALSE The POST_CODE_PROPERTY_POST_CODE_ENABLED
>>>> bit of
>>>>
>>>> - PcdPostCodeProperyMask is clear.
>>>>
>>>> + PcdPostCodePropertyMask is clear.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> BOOLEAN
>>>>
>>>> @@ -92,9 +92,9 @@ PostCodeEnabled (
>>>> bit of PcdPostCodePropertyMask is set. Otherwise FALSE is returned.
>>>>
>>>>
>>>>
>>>> @retval TRUE The
>>>> POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
>>>>
>>>> - PcdPostCodeProperyMask is set.
>>>>
>>>> + PcdPostCodePropertyMask is set.
>>>>
>>>> @retval FALSE The
>>>> POST_CODE_PROPERTY_POST_CODE_DESCRIPTION_ENABLED bit of
>>>>
>>>> - PcdPostCodeProperyMask is clear.
>>>>
>>>> + PcdPostCodePropertyMask is clear.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> BOOLEAN
>>>>
>>>> @@ -106,7 +106,7 @@ PostCodeDescriptionEnabled (
>>>> /**
>>>>
>>>> Sends a 32-bit value to a POST card.
>>>>
>>>>
>>>>
>>>> - If POST codes are enabled in PcdPostCodeProperyMask, then call
>>>> PostCode()
>>>>
>>>> + If POST codes are enabled in PcdPostCodePropertyMask, then call
>>>> PostCode()
>>>>
>>>> passing in Value. Value is returned.
>>>>
>>>>
>>>>
>>>> @param Value The 32-bit value to write to the POST card.
>>>>
>>>> @@ -120,7 +120,7 @@ PostCodeDescriptionEnabled (
>>>> Sends a 32-bit value to a POST and associated ASCII string.
>>>>
>>>>
>>>>
>>>> If POST codes and POST code descriptions are enabled in
>>>>
>>>> - PcdPostCodeProperyMask, then call PostCodeWithDescription() passing
>> in
>>>>
>>>> + PcdPostCodePropertyMask, then call PostCodeWithDescription()
>> passing
>>>> in
>>>>
>>>> Value and Description. If only POST codes are enabled, then call
>>>> PostCode()
>>>>
>>>> passing in Value. Value is returned.
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Library/ReportStatusCodeLib.h
>>>> b/MdePkg/Include/Library/ReportStatusCodeLib.h
>>>> index 3763e69928..3268e07aa6 100644
>>>> --- a/MdePkg/Include/Library/ReportStatusCodeLib.h
>>>> +++ b/MdePkg/Include/Library/ReportStatusCodeLib.h
>>>> @@ -298,12 +298,12 @@ ReportStatusCodeEx (
>>>> Returns TRUE if status codes of type EFI_PROGRESS_CODE are enabled
>>>>
>>>>
>>>>
>>>> This function returns TRUE if the
>>>> REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED
>>>>
>>>> - bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is
>>>> returned.
>>>>
>>>> + bit of PcdReportStatusCodePropertyMask is set. Otherwise FALSE is
>>>> returned.
>>>>
>>>>
>>>>
>>>> @retval TRUE The
>>>> REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
>>>>
>>>> - PcdReportStatusCodeProperyMask is set.
>>>>
>>>> + PcdReportStatusCodePropertyMask is set.
>>>>
>>>> @retval FALSE The
>>>> REPORT_STATUS_CODE_PROPERTY_PROGRESS_CODE_ENABLED bit of
>>>>
>>>> - PcdReportStatusCodeProperyMask is clear.
>>>>
>>>> + PcdReportStatusCodePropertyMask is clear.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> BOOLEAN
>>>>
>>>> @@ -316,12 +316,12 @@ ReportProgressCodeEnabled (
>>>> Returns TRUE if status codes of type EFI_ERROR_CODE are enabled
>>>>
>>>>
>>>>
>>>> This function returns TRUE if the
>>>> REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED
>>>>
>>>> - bit of PcdReportStatusCodeProperyMask is set. Otherwise, FALSE is
>>>> returned.
>>>>
>>>> + bit of PcdReportStatusCodePropertyMask is set. Otherwise, FALSE is
>>>> returned.
>>>>
>>>>
>>>>
>>>> @retval TRUE The
>>>> REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
>>>>
>>>> - PcdReportStatusCodeProperyMask is set.
>>>>
>>>> + PcdReportStatusCodePropertyMask is set.
>>>>
>>>> @retval FALSE The
>>>> REPORT_STATUS_CODE_PROPERTY_ERROR_CODE_ENABLED bit of
>>>>
>>>> - PcdReportStatusCodeProperyMask is clear.
>>>>
>>>> + PcdReportStatusCodePropertyMask is clear.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> BOOLEAN
>>>>
>>>> @@ -334,12 +334,12 @@ ReportErrorCodeEnabled (
>>>> Returns TRUE if status codes of type EFI_DEBUG_CODE are enabled
>>>>
>>>>
>>>>
>>>> This function returns TRUE if the
>>>> REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED
>>>>
>>>> - bit of PcdReportStatusCodeProperyMask is set. Otherwise FALSE is
>>>> returned.
>>>>
>>>> + bit of PcdReportStatusCodePropertyMask is set. Otherwise FALSE is
>>>> returned.
>>>>
>>>>
>>>>
>>>> @retval TRUE The
>>>> REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
>>>>
>>>> - PcdReportStatusCodeProperyMask is set.
>>>>
>>>> + PcdReportStatusCodePropertyMask is set.
>>>>
>>>> @retval FALSE The
>>>> REPORT_STATUS_CODE_PROPERTY_DEBUG_CODE_ENABLED bit of
>>>>
>>>> - PcdReportStatusCodeProperyMask is clear.
>>>>
>>>> + PcdReportStatusCodePropertyMask is clear.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> BOOLEAN
>>>>
>>>> @@ -352,7 +352,7 @@ ReportDebugCodeEnabled (
>>>> Reports a status code with minimal parameters if the status code type
>>> is
>>>> enabled.
>>>>
>>>>
>>>>
>>>> If the status code type specified by Type is enabled in
>>>>
>>>> - PcdReportStatusCodeProperyMask, then call ReportStatusCode()
>> passing in
>>>> Type
>>>>
>>>> + PcdReportStatusCodePropertyMask, then call ReportStatusCode()
>> passing
>>>> in Type
>>>>
>>>> and Value.
>>>>
>>>>
>>>>
>>>> @param Type The status code type.
>>>>
>>>> @@ -377,7 +377,7 @@ ReportDebugCodeEnabled (
>>>> status code type is enabled.
>>>>
>>>>
>>>>
>>>> If the status code type specified by Type is enabled in
>>>>
>>>> - PcdReportStatusCodeProperyMask, then call
>>>> ReportStatusCodeWithDevicePath()
>>>>
>>>> + PcdReportStatusCodePropertyMask, then call
>>>> ReportStatusCodeWithDevicePath()
>>>>
>>>> passing in Type, Value, and DevicePath.
>>>>
>>>>
>>>>
>>>> @param Type The status code type.
>>>>
>>>> @@ -407,7 +407,7 @@ ReportDebugCodeEnabled (
>>>> is enabled.
>>>>
>>>>
>>>>
>>>> If the status code type specified by Type is enabled in
>>>>
>>>> - PcdReportStatusCodeProperyMask, then call
>>>> ReportStatusCodeWithExtendedData()
>>>>
>>>> + PcdReportStatusCodePropertyMask, then call
>>>> ReportStatusCodeWithExtendedData()
>>>>
>>>> passing in Type, Value, ExtendedData, and ExtendedDataSize.
>>>>
>>>>
>>>>
>>>> @param Type The status code type.
>>>>
>>>> @@ -438,7 +438,7 @@ ReportDebugCodeEnabled (
>>>> Reports a status code specifying all parameters if the status code type
>>> is
>>>> enabled.
>>>>
>>>>
>>>>
>>>> If the status code type specified by Type is enabled in
>>>>
>>>> - PcdReportStatusCodeProperyMask, then call ReportStatusCodeEx()
>> passing
>>>> in Type,
>>>>
>>>> + PcdReportStatusCodePropertyMask, then call ReportStatusCodeEx()
>>>> passing in Type,
>>>>
>>>> Value, Instance, CallerId, ExtendedDataGuid, ExtendedData, and
>>>> ExtendedDataSize.
>>>>
>>>>
>>>>
>>>> @param Type The status code type.
>>>>
>>>> diff --git a/MdePkg/Include/Library/S3PciLib.h
>>>> b/MdePkg/Include/Library/S3PciLib.h
>>>> index 1479859b84..185844d0c7 100644
>>>> --- a/MdePkg/Include/Library/S3PciLib.h
>>>> +++ b/MdePkg/Include/Library/S3PciLib.h
>>>> @@ -985,7 +985,7 @@ S3PciBitFieldAndThenOr32 (
>>>> Size into the buffer specified by Buffer. This function only allows the
>>> PCI
>>>>
>>>> configuration registers from a single PCI function to be read. Size is
>>>>
>>>> returned. When possible 32-bit PCI configuration read cycles are used
>>> to
>>>> read
>>>>
>>>> - from StartAdress to StartAddress + Size. Due to alignment restrictions,
>>>> 8-bit
>>>>
>>>> + from StartAddress to StartAddress + Size. Due to alignment
>>> restrictions,
>>>> 8-bit
>>>>
>>>> and 16-bit PCI configuration read cycles may be used at the beginning
>>> and
>>>> the
>>>>
>>>> end of the range.
>>>>
>>>>
>>>>
>>>> @@ -1018,7 +1018,7 @@ S3PciReadBuffer (
>>>> Size from the buffer specified by Buffer. This function only allows the
>>> PCI
>>>>
>>>> configuration registers from a single PCI function to be written. Size
>>> is
>>>>
>>>> returned. When possible 32-bit PCI configuration write cycles are used
>>> to
>>>>
>>>> - write from StartAdress to StartAddress + Size. Due to alignment
>>>> restrictions,
>>>>
>>>> + write from StartAddress to StartAddress + Size. Due to alignment
>>>> restrictions,
>>>>
>>>> 8-bit and 16-bit PCI configuration write cycles may be used at the
>>>> beginning
>>>>
>>>> and the end of the range.
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Library/S3PciSegmentLib.h
>>>> b/MdePkg/Include/Library/S3PciSegmentLib.h
>>>> index 5067d4fcbb..21863c2597 100644
>>>> --- a/MdePkg/Include/Library/S3PciSegmentLib.h
>>>> +++ b/MdePkg/Include/Library/S3PciSegmentLib.h
>>>> @@ -970,7 +970,7 @@ S3PciSegmentBitFieldAndThenOr32 (
>>>> Size into the buffer specified by Buffer. This function only allows the
>>> PCI
>>>>
>>>> configuration registers from a single PCI function to be read. Size is
>>>>
>>>> returned. When possible 32-bit PCI configuration read cycles are used
>>> to
>>>> read
>>>>
>>>> - from StartAdress to StartAddress + Size. Due to alignment restrictions,
>>>> 8-bit
>>>>
>>>> + from StartAddress to StartAddress + Size. Due to alignment
>>> restrictions,
>>>> 8-bit
>>>>
>>>> and 16-bit PCI configuration read cycles may be used at the beginning
>>> and
>>>> the
>>>>
>>>> end of the range.
>>>>
>>>>
>>>>
>>>> @@ -1003,7 +1003,7 @@ S3PciSegmentReadBuffer (
>>>> Size from the buffer specified by Buffer. This function only allows the
>>> PCI
>>>>
>>>> configuration registers from a single PCI function to be written. Size
>>> is
>>>>
>>>> returned. When possible 32-bit PCI configuration write cycles are used
>>> to
>>>>
>>>> - write from StartAdress to StartAddress + Size. Due to alignment
>>>> restrictions,
>>>>
>>>> + write from StartAddress to StartAddress + Size. Due to alignment
>>>> restrictions,
>>>>
>>>> 8-bit and 16-bit PCI configuration write cycles may be used at the
>>>> beginning
>>>>
>>>> and the end of the range.
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Library/UefiLib.h
>>>> b/MdePkg/Include/Library/UefiLib.h
>>>> index be7da7fdf7..450d766513 100644
>>>> --- a/MdePkg/Include/Library/UefiLib.h
>>>> +++ b/MdePkg/Include/Library/UefiLib.h
>>>> @@ -317,7 +317,7 @@ EfiInitializeLock (
>>>> Macro that calls DebugAssert() if an EFI_LOCK structure is not in the
>>>> locked state.
>>>>
>>>>
>>>>
>>>> If MDEPKG_NDEBUG is not defined and the
>>>> DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED
>>>>
>>>> - bit of PcdDebugProperyMask is set, then this macro evaluates the
>>>> EFI_LOCK
>>>>
>>>> + bit of PcdDebugPropertyMask is set, then this macro evaluates the
>>>> EFI_LOCK
>>>>
>>>> structure specified by Lock. If Lock is not in the locked state, then
>>>>
>>>> DebugAssert() is called passing in the source filename, source line
>>> number,
>>>>
>>>> and Lock.
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/BlockIo.h
>>>> b/MdePkg/Include/Protocol/BlockIo.h
>>>> index ac9adf7a9c..414bf98b52 100644
>>>> --- a/MdePkg/Include/Protocol/BlockIo.h
>>>> +++ b/MdePkg/Include/Protocol/BlockIo.h
>>>> @@ -90,7 +90,7 @@ EFI_STATUS
>>>> @retval EFI_WRITE_PROTECTED The device can not be written to.
>>>>
>>>> @retval EFI_DEVICE_ERROR The device reported an error while
>>>> performing the write.
>>>>
>>>> @retval EFI_NO_MEDIA There is no media in the device.
>>>>
>>>> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched
>> the
>>>> current device.
>>>>
>>>> + @retval EFI_MEDIA_CHANGED The MediaId does not matched
>> the
>>>> current device.
>>>>
>>>> @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the
>>>> block size of the device.
>>>>
>>>> @retval EFI_INVALID_PARAMETER The write request contains LBAs
>> that
>>>> are not valid,
>>>>
>>>> or the buffer is not on proper
>>>> alignment.
>>>>
>>>> @@ -112,7 +112,7 @@ EFI_STATUS
>>>> @param This Indicates a pointer to the calling
>> context.
>>>>
>>>>
>>>>
>>>> @retval EFI_SUCCESS All outstanding data was written to the
>>>> device
>>>>
>>>> - @retval EFI_DEVICE_ERROR The device reported an error while
>> writting
>>>> back the data
>>>>
>>>> + @retval EFI_DEVICE_ERROR The device reported an error while
>> writing
>>>> back the data
>>>>
>>>> @retval EFI_NO_MEDIA There is no media in the device.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/BlockIo2.h
>>>> b/MdePkg/Include/Protocol/BlockIo2.h
>>>> index d25f51f733..0502554205 100644
>>>> --- a/MdePkg/Include/Protocol/BlockIo2.h
>>>> +++ b/MdePkg/Include/Protocol/BlockIo2.h
>>>> @@ -44,7 +44,7 @@ typedef struct {
>>>>
>>>>
>>>> @param[in] This Indicates a pointer to the
>> calling
>>>> context.
>>>>
>>>> @param[in] ExtendedVerification Indicates that the driver may
>> perform
>>>> a more
>>>>
>>>> - exhausive verification
>> operation
>>>> of the device
>>>>
>>>> + exhaustive verification
>> operation
>>>> of the device
>>>>
>>>> during reset.
>>>>
>>>>
>>>>
>>>> @retval EFI_SUCCESS The device was reset.
>>>>
>>>> @@ -125,7 +125,7 @@ EFI_STATUS
>>>> the Event is NULL.
>>>>
>>>> @retval EFI_WRITE_PROTECTED The device can not be written to.
>>>>
>>>> @retval EFI_NO_MEDIA There is no media in the device.
>>>>
>>>> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched
>> the
>>>> current device.
>>>>
>>>> + @retval EFI_MEDIA_CHANGED The MediaId does not matched
>> the
>>>> current device.
>>>>
>>>> @retval EFI_DEVICE_ERROR The device reported an error while
>>>> performing the write.
>>>>
>>>> @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the
>>>> block size of the device.
>>>>
>>>> @retval EFI_INVALID_PARAMETER The write request contains LBAs
>> that
>>>> are not valid,
>>>>
>>>> @@ -158,7 +158,7 @@ EFI_STATUS
>>>> @retval EFI_SUCCESS The flush request was queued if
>> Event
>>>> is not NULL.
>>>>
>>>> All outstanding data was written
>>>> correctly to the
>>>>
>>>> device if the Event is NULL.
>>>>
>>>> - @retval EFI_DEVICE_ERROR The device reported an error while
>>>> writting back
>>>>
>>>> + @retval EFI_DEVICE_ERROR The device reported an error while
>>>> writing back
>>>>
>>>> the data.
>>>>
>>>> @retval EFI_WRITE_PROTECTED The device cannot be written to.
>>>>
>>>> @retval EFI_NO_MEDIA There is no media in the device.
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/BlockIoCrypto.h
>>>> b/MdePkg/Include/Protocol/BlockIoCrypto.h
>>>> index bcc0ed40be..f0af6a8bb0 100644
>>>> --- a/MdePkg/Include/Protocol/BlockIoCrypto.h
>>>> +++ b/MdePkg/Include/Protocol/BlockIoCrypto.h
>>>> @@ -168,7 +168,7 @@ typedef struct {
>>>> up to the platform firmware or driver to implement.
>>>>
>>>>
>>>>
>>>> @param[in] This Pointer to the
>>>> EFI_BLOCK_IO_CRYPTO_PROTOCOL instance.
>>>>
>>>> - @param[in] ExtendedVerification Indicates that the driver may
>> perform
>>>> a more exhausive
>>>>
>>>> + @param[in] ExtendedVerification Indicates that the driver may
>> perform
>>>> a more exhaustive
>>>>
>>>> verification operation of the
>>>> device during reset.
>>>>
>>>>
>>>>
>>>> @retval EFI_SUCCESS The block device was reset.
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/DiskIo.h
>>>> b/MdePkg/Include/Protocol/DiskIo.h
>>>> index eaa5cbcea2..2c86530a5c 100644
>>>> --- a/MdePkg/Include/Protocol/DiskIo.h
>>>> +++ b/MdePkg/Include/Protocol/DiskIo.h
>>>> @@ -42,7 +42,7 @@ typedef EFI_DISK_IO_PROTOCOL EFI_DISK_IO;
>>>> @retval EFI_SUCCESS The data was read correctly from
>> the
>>>> device.
>>>>
>>>> @retval EFI_DEVICE_ERROR The device reported an error while
>>>> performing the read.
>>>>
>>>> @retval EFI_NO_MEDIA There is no media in the device.
>>>>
>>>> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched
>> the
>>>> current device.
>>>>
>>>> + @retval EFI_MEDIA_CHANGED The MediaId does not matched
>> the
>>>> current device.
>>>>
>>>> @retval EFI_INVALID_PARAMETER The read request contains device
>>>> addresses that are not
>>>>
>>>> valid for the device.
>>>>
>>>>
>>>>
>>>> @@ -70,7 +70,7 @@ EFI_STATUS
>>>> @retval EFI_WRITE_PROTECTED The device can not be written to.
>>>>
>>>> @retval EFI_DEVICE_ERROR The device reported an error while
>>>> performing the write.
>>>>
>>>> @retval EFI_NO_MEDIA There is no media in the device.
>>>>
>>>> - @retval EFI_MEDIA_CHNAGED The MediaId does not matched
>> the
>>>> current device.
>>>>
>>>> + @retval EFI_MEDIA_CHANGED The MediaId does not matched
>> the
>>>> current device.
>>>>
>>>> @retval EFI_INVALID_PARAMETER The write request contains device
>>>> addresses that are not
>>>>
>>>> valid for the device.
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/DiskIo2.h
>>>> b/MdePkg/Include/Protocol/DiskIo2.h
>>>> index c989bb5f45..58c972e48e 100644
>>>> --- a/MdePkg/Include/Protocol/DiskIo2.h
>>>> +++ b/MdePkg/Include/Protocol/DiskIo2.h
>>>> @@ -70,7 +70,7 @@ EFI_STATUS
>>>>
>>>> Event will be signaled upon completion.
>>>>
>>>> @retval EFI_DEVICE_ERROR The device reported an error while
>>>> performing the write.
>>>>
>>>> @retval EFI_NO_MEDIA There is no medium in the device.
>>>>
>>>> - @retval EFI_MEDIA_CHNAGED The MediaId is not for the current
>>>> medium.
>>>>
>>>> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
>> current
>>>> medium.
>>>>
>>>> @retval EFI_INVALID_PARAMETER The read request contains device
>>>> addresses that are not valid for the device.
>>>>
>>>> @retval EFI_OUT_OF_RESOURCES The request could not be
>> completed
>>>> due to a lack of resources.
>>>>
>>>>
>>>>
>>>> @@ -103,7 +103,7 @@ EFI_STATUS
>>>> @retval EFI_WRITE_PROTECTED The device cannot be written to.
>>>>
>>>> @retval EFI_DEVICE_ERROR The device reported an error while
>>>> performing the write operation.
>>>>
>>>> @retval EFI_NO_MEDIA There is no medium in the device.
>>>>
>>>> - @retval EFI_MEDIA_CHNAGED The MediaId is not for the current
>>>> medium.
>>>>
>>>> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
>> current
>>>> medium.
>>>>
>>>> @retval EFI_INVALID_PARAMETER The write request contains device
>>>> addresses that are not valid for the device.
>>>>
>>>> @retval EFI_OUT_OF_RESOURCES The request could not be
>> completed
>>>> due to a lack of resources.
>>>>
>>>>
>>>>
>>>> @@ -133,7 +133,7 @@ EFI_STATUS
>>>> @retval EFI_WRITE_PROTECTED The device cannot be written to.
>>>>
>>>> @retval EFI_DEVICE_ERROR The device reported an error while
>>>> performing the write operation.
>>>>
>>>> @retval EFI_NO_MEDIA There is no medium in the device.
>>>>
>>>> - @retval EFI_MEDIA_CHNAGED The MediaId is not for the current
>>>> medium.
>>>>
>>>> + @retval EFI_MEDIA_CHANGED The MediaId is not for the
>> current
>>>> medium.
>>>>
>>>> @retval EFI_OUT_OF_RESOURCES The request could not be
>> completed
>>>> due to a lack of resources.
>>>>
>>>> **/
>>>>
>>>> typedef
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/Ip4.h
>> b/MdePkg/Include/Protocol/Ip4.h
>>>> index 4c0ed6fd3c..57a25122ba 100644
>>>> --- a/MdePkg/Include/Protocol/Ip4.h
>>>> +++ b/MdePkg/Include/Protocol/Ip4.h
>>>> @@ -37,7 +37,7 @@ typedef struct _EFI_IP4_PROTOCOL
>>>> EFI_IP4_PROTOCOL;
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_IP4_ADDRESS_PAIR is deprecated in the UEFI 2.4B and should not
>> be
>>>> used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> EFI_HANDLE InstanceHandle;
>>>>
>>>> @@ -47,7 +47,7 @@ typedef struct {
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_IP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not
>>>> be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> EFI_HANDLE DriverHandle;
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/Ip6.h
>> b/MdePkg/Include/Protocol/Ip6.h
>>>> index 4aff36f0a1..269ae0d6b0 100644
>>>> --- a/MdePkg/Include/Protocol/Ip6.h
>>>> +++ b/MdePkg/Include/Protocol/Ip6.h
>>>> @@ -37,7 +37,7 @@ typedef struct _EFI_IP6_PROTOCOL
>>>> EFI_IP6_PROTOCOL;
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_IP6_ADDRESS_PAIR is deprecated in the UEFI 2.4B and should not
>> be
>>>> used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> ///
>>>>
>>>> @@ -56,7 +56,7 @@ typedef struct {
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_IP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should not
>>>> be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> ///
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
>>>> b/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
>>>> index 78acb4ddae..9649b819ba 100644
>>>> --- a/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
>>>> +++ b/MdePkg/Include/Protocol/NetworkInterfaceIdentifier.h
>>>> @@ -39,7 +39,7 @@ SPDX-License-Identifier: BSD-2-Clause-Patent
>>>> #define EFI_NETWORK_INTERFACE_IDENTIFIER_INTERFACE_REVISION
>>>> EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL_REVISION
>>>>
>>>>
>>>>
>>>> ///
>>>>
>>>> -/// Forward reference for pure ANSI compatability.
>>>>
>>>> +/// Forward reference for pure ANSI compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct _EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL
>>>> EFI_NETWORK_INTERFACE_IDENTIFIER_PROTOCOL;
>>>>
>>>>
>>>>
>>>> @@ -82,7 +82,7 @@ typedef enum {
>>>> } EFI_NETWORK_INTERFACE_TYPE;
>>>>
>>>>
>>>>
>>>> ///
>>>>
>>>> -/// Forward reference for pure ANSI compatability.
>>>>
>>>> +/// Forward reference for pure ANSI compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct undiconfig_table UNDI_CONFIG_TABLE;
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/Pkcs7Verify.h
>>>> b/MdePkg/Include/Protocol/Pkcs7Verify.h
>>>> index 068eda8b45..93b6c2f9b7 100644
>>>> --- a/MdePkg/Include/Protocol/Pkcs7Verify.h
>>>> +++ b/MdePkg/Include/Protocol/Pkcs7Verify.h
>>>> @@ -28,7 +28,7 @@ typedef struct _EFI_PKCS7_VERIFY_PROTOCOL
>>>> EFI_PKCS7_VERIFY_PROTOCOL;
>>>>
>>>>
>>>> /**
>>>>
>>>> Processes a buffer containing binary DER-encoded PKCS7 signature.
>>>>
>>>> - The signed data content may be embedded within the buffer or
>> separated.
>>>> Funtion
>>>>
>>>> + The signed data content may be embedded within the buffer or
>> separated.
>>>> Function
>>>>
>>>> verifies the signature of the content is valid and signing certificate
>>> was not
>>>>
>>>> revoked and is contained within a list of trusted signers.
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/RamDisk.h
>>>> b/MdePkg/Include/Protocol/RamDisk.h
>>>> index 2ab5a5e5e1..8808efdf66 100644
>>>> --- a/MdePkg/Include/Protocol/RamDisk.h
>>>> +++ b/MdePkg/Include/Protocol/RamDisk.h
>>>> @@ -19,7 +19,7 @@
>>>> { 0xab38a0df, 0x6873, 0x44a9, { 0x87, 0xe6, 0xd4, 0xeb, 0x56, 0x14,
>>> 0x84,
>>>> 0x49 }};
>>>>
>>>>
>>>>
>>>> //
>>>>
>>>> -// Forward reference for pure ANSI compatability
>>>>
>>>> +// Forward reference for pure ANSI compatibility
>>>>
>>>> //
>>>>
>>>> typedef struct _EFI_RAM_DISK_PROTOCOL EFI_RAM_DISK_PROTOCOL;
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/ScsiIo.h
>>>> b/MdePkg/Include/Protocol/ScsiIo.h
>>>> index 7ebfd9a652..7485e52b3f 100644
>>>> --- a/MdePkg/Include/Protocol/ScsiIo.h
>>>> +++ b/MdePkg/Include/Protocol/ScsiIo.h
>>>> @@ -18,7 +18,7 @@
>>>> }
>>>>
>>>>
>>>>
>>>> ///
>>>>
>>>> -/// Forward reference for pure ANSI compatability
>>>>
>>>> +/// Forward reference for pure ANSI compatibility
>>>>
>>>> ///
>>>>
>>>> typedef struct _EFI_SCSI_IO_PROTOCOL EFI_SCSI_IO_PROTOCOL;
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/ScsiPassThru.h
>>>> b/MdePkg/Include/Protocol/ScsiPassThru.h
>>>> index c87fb97aee..a4c6a6be3d 100644
>>>> --- a/MdePkg/Include/Protocol/ScsiPassThru.h
>>>> +++ b/MdePkg/Include/Protocol/ScsiPassThru.h
>>>> @@ -22,7 +22,7 @@
>>>> }
>>>>
>>>>
>>>>
>>>> ///
>>>>
>>>> -/// Forward reference for pure ANSI compatability
>>>>
>>>> +/// Forward reference for pure ANSI compatibility
>>>>
>>>> ///
>>>>
>>>> typedef struct _EFI_SCSI_PASS_THRU_PROTOCOL
>>>> EFI_SCSI_PASS_THRU_PROTOCOL;
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/ServiceBinding.h
>>>> b/MdePkg/Include/Protocol/ServiceBinding.h
>>>> index b39af73a95..3fb9ed6e98 100644
>>>> --- a/MdePkg/Include/Protocol/ServiceBinding.h
>>>> +++ b/MdePkg/Include/Protocol/ServiceBinding.h
>>>> @@ -14,7 +14,7 @@
>>>> #define __EFI_SERVICE_BINDING_H__
>>>>
>>>>
>>>>
>>>> ///
>>>>
>>>> -/// Forward reference for pure ANSI compatability
>>>>
>>>> +/// Forward reference for pure ANSI compatibility
>>>>
>>>> ///
>>>>
>>>> typedef struct _EFI_SERVICE_BINDING_PROTOCOL
>>>> EFI_SERVICE_BINDING_PROTOCOL;
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/Shell.h
>>>> b/MdePkg/Include/Protocol/Shell.h
>>>> index 5efee49e19..d65c87a735 100644
>>>> --- a/MdePkg/Include/Protocol/Shell.h
>>>> +++ b/MdePkg/Include/Protocol/Shell.h
>>>> @@ -180,7 +180,7 @@ BOOLEAN
>>>>
>>>>
>>>> @param[in] FileHandle The file handle to be closed.
>>>>
>>>>
>>>>
>>>> - @retval EFI_SUCCESS The file closed sucessfully.
>>>>
>>>> + @retval EFI_SUCCESS The file closed successfully.
>>>>
>>>> **/
>>>>
>>>> typedef
>>>>
>>>> EFI_STATUS
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/ShellDynamicCommand.h
>>>> b/MdePkg/Include/Protocol/ShellDynamicCommand.h
>>>> index f1bb59d700..c7756f9a81 100644
>>>> --- a/MdePkg/Include/Protocol/ShellDynamicCommand.h
>>>> +++ b/MdePkg/Include/Protocol/ShellDynamicCommand.h
>>>> @@ -34,7 +34,7 @@ typedef struct
>>>> _EFI_SHELL_DYNAMIC_COMMAND_PROTOCOL
>>>> EFI_SHELL_DYNAMIC_COMMAND_PRO
>>>> @param[in] Shell The instance of the shell
>> protocol
>>>> used in the context
>>>>
>>>> of processing this command.
>>>>
>>>>
>>>>
>>>> - @return EFI_SUCCESS the operation was sucessful
>>>>
>>>> + @return EFI_SUCCESS the operation was successful
>>>>
>>>> @return other the operation failed.
>>>>
>>>> **/
>>>>
>>>> typedef
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/Tcp4.h
>>>> b/MdePkg/Include/Protocol/Tcp4.h
>>>> index e81c2e71f6..cf88739687 100644
>>>> --- a/MdePkg/Include/Protocol/Tcp4.h
>>>> +++ b/MdePkg/Include/Protocol/Tcp4.h
>>>> @@ -31,7 +31,7 @@ typedef struct _EFI_TCP4_PROTOCOL
>>>> EFI_TCP4_PROTOCOL;
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_TCP4_SERVICE_POINT is deprecated in the UEFI 2.4B and should
>> not
>>>> be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> EFI_HANDLE InstanceHandle;
>>>>
>>>> @@ -43,7 +43,7 @@ typedef struct {
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_TCP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
>> not
>>>> be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> EFI_HANDLE DriverHandle;
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/Tcp6.h
>>>> b/MdePkg/Include/Protocol/Tcp6.h
>>>> index a8787dd3af..1391978a35 100644
>>>> --- a/MdePkg/Include/Protocol/Tcp6.h
>>>> +++ b/MdePkg/Include/Protocol/Tcp6.h
>>>> @@ -32,7 +32,7 @@ typedef struct _EFI_TCP6_PROTOCOL
>>>> EFI_TCP6_PROTOCOL;
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_TCP6_SERVICE_POINT is deprecated in the UEFI 2.4B and should
>> not
>>>> be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> ///
>>>>
>>>> @@ -64,7 +64,7 @@ typedef struct {
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_TCP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
>> not
>>>> be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> EFI_HANDLE DriverHandle; ///< The handle of the
>>>> driver that creates this entry.
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/Udp4.h
>>>> b/MdePkg/Include/Protocol/Udp4.h
>>>> index a4ac6fd4e7..e7e41cadef 100644
>>>> --- a/MdePkg/Include/Protocol/Udp4.h
>>>> +++ b/MdePkg/Include/Protocol/Udp4.h
>>>> @@ -33,7 +33,7 @@ typedef struct _EFI_UDP4_PROTOCOL
>>>> EFI_UDP4_PROTOCOL;
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_UDP4_SERVICE_POINT is deprecated in the UEFI 2.4B and should
>>>> not be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> EFI_HANDLE InstanceHandle;
>>>>
>>>> @@ -45,7 +45,7 @@ typedef struct {
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_UDP4_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
>>>> not be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> EFI_HANDLE DriverHandle;
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/Udp6.h
>>>> b/MdePkg/Include/Protocol/Udp6.h
>>>> index 61fa623917..a8179c8f93 100644
>>>> --- a/MdePkg/Include/Protocol/Udp6.h
>>>> +++ b/MdePkg/Include/Protocol/Udp6.h
>>>> @@ -28,7 +28,7 @@
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_UDP6_SERVICE_POINT is deprecated in the UEFI 2.4B and should
>>>> not be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> ///
>>>>
>>>> @@ -59,7 +59,7 @@ typedef struct {
>>>>
>>>>
>>>> ///
>>>>
>>>> /// EFI_UDP6_VARIABLE_DATA is deprecated in the UEFI 2.4B and should
>>>> not be used any more.
>>>>
>>>> -/// The definition in here is only present to provide backwards
>>> compatability.
>>>>
>>>> +/// The definition in here is only present to provide backwards
>>> compatibility.
>>>>
>>>> ///
>>>>
>>>> typedef struct {
>>>>
>>>> ///
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/UfsDeviceConfig.h
>>>> b/MdePkg/Include/Protocol/UfsDeviceConfig.h
>>>> index 34676c7831..b3e58c4aad 100644
>>>> --- a/MdePkg/Include/Protocol/UfsDeviceConfig.h
>>>> +++ b/MdePkg/Include/Protocol/UfsDeviceConfig.h
>>>> @@ -19,7 +19,7 @@
>>>> { 0xb81bfab0, 0xeb3, 0x4cf9, { 0x84, 0x65, 0x7f, 0xa9, 0x86, 0x36,
>>> 0x16,
>>>> 0x64 }};
>>>>
>>>>
>>>>
>>>> //
>>>>
>>>> -// Forward reference for pure ANSI compatability
>>>>
>>>> +// Forward reference for pure ANSI compatibility
>>>>
>>>> //
>>>>
>>>> typedef struct _EFI_UFS_DEVICE_CONFIG_PROTOCOL
>>>> EFI_UFS_DEVICE_CONFIG_PROTOCOL;
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/UgaDraw.h
>>>> b/MdePkg/Include/Protocol/UgaDraw.h
>>>> index 8d33bf873c..f27fde5e32 100644
>>>> --- a/MdePkg/Include/Protocol/UgaDraw.h
>>>> +++ b/MdePkg/Include/Protocol/UgaDraw.h
>>>> @@ -126,7 +126,7 @@ typedef enum {
>>>>
>>>>
>>>> @retval EFI_SUCCESS - The Blt operation completed.
>>>>
>>>> @retval EFI_INVALID_PARAMETER - BltOperation is not valid.
>>>>
>>>> - @retval EFI_DEVICE_ERROR - A hardware error occurred
>>>> writting to the video buffer.
>>>>
>>>> + @retval EFI_DEVICE_ERROR - A hardware error occurred
>>>> writing to the video buffer.
>>>>
>>>>
>>>>
>>>> **/
>>>>
>>>> typedef
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/Usb2HostController.h
>>>> b/MdePkg/Include/Protocol/Usb2HostController.h
>>>> index 06e20beba8..50bbb5574a 100644
>>>> --- a/MdePkg/Include/Protocol/Usb2HostController.h
>>>> +++ b/MdePkg/Include/Protocol/Usb2HostController.h
>>>> @@ -20,7 +20,7 @@
>>>> }
>>>>
>>>>
>>>>
>>>> ///
>>>>
>>>> -/// Forward reference for pure ANSI compatability
>>>>
>>>> +/// Forward reference for pure ANSI compatibility
>>>>
>>>> ///
>>>>
>>>> typedef struct _EFI_USB2_HC_PROTOCOL EFI_USB2_HC_PROTOCOL;
>>>>
>>>>
>>>>
>>>> diff --git a/MdePkg/Include/Protocol/UsbHostController.h
>>>> b/MdePkg/Include/Protocol/UsbHostController.h
>>>> index 8b626ec52a..7b215f6d03 100644
>>>> --- a/MdePkg/Include/Protocol/UsbHostController.h
>>>> +++ b/MdePkg/Include/Protocol/UsbHostController.h
>>>> @@ -21,7 +21,7 @@
>>>> }
>>>>
>>>>
>>>>
>>>> ///
>>>>
>>>> -/// Forward reference for pure ANSI compatability
>>>>
>>>> +/// Forward reference for pure ANSI compatibility
>>>>
>>>> ///
>>>>
>>>> typedef struct _EFI_USB_HC_PROTOCOL EFI_USB_HC_PROTOCOL;
>>>>
>>>>
>>>>
>>>> --
>>>> 2.39.2 (Apple Git-144)
>>>>
>>>>
>>>
>>>
>>>
>>>
>
>
>
next prev parent reply other threads:[~2023-05-17 18:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-12 10:25 [PATCH] MdePkg Include: Fix typos Giri Mudusuru
2023-05-15 1:40 ` 回复: " gaoliming
2023-05-15 2:48 ` Giri Mudusuru
2023-05-16 1:19 ` 回复: " gaoliming
2023-05-17 18:20 ` Giri Mudusuru [this message]
2023-05-18 3:06 ` [edk2-devel] " Michael Kubacki
2023-05-21 2:41 ` Giri Mudusuru
2023-05-22 1:14 ` 回复: " gaoliming
2023-05-22 14:45 ` Michael Kubacki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1E3AB2AE-9862-4E35-97A4-135B3E911E7F@apple.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox