Re: [PATCH v2 2/2] MdePkg: Remove FIT table industry standard header file.

["Liming Gao" <liming.gao@intel.com>]

Reviewed-by: Liming Gao <liming.gao@intel.com>

> -----Original Message-----
> From: Fu, Siyuan <siyuan.fu@intel.com>
> Sent: Tuesday, February 11, 2020 9:37 PM
> To: devel@edk2.groups.io
> Cc: Kinney, Michael D <michael.d.kinney@intel.com>; Gao, Liming <liming.gao@intel.com>
> Subject: [PATCH v2 2/2] MdePkg: Remove FIT table industry standard header file.
> 
> Commit c7c964b and dd01704 add header file for FIT table and update
> MpInitLib to support FIT based microcode shadow operation. There are
> comments that FIT is Intel specific specification instead of industry
> standard, which should not be placed in EDK2 MdePkg and UefiCpuPkg.
> This patch removes the header file added by c7c964b.
> 
> Cc: Michael D Kinney <michael.d.kinney@intel.com>
> Cc: Liming Gao <liming.gao@intel.com>
> Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
> ---
>  .../IndustryStandard/FirmwareInterfaceTable.h | 76 -------------------
>  1 file changed, 76 deletions(-)
>  delete mode 100644 MdePkg/Include/IndustryStandard/FirmwareInterfaceTable.h
> 
> diff --git a/MdePkg/Include/IndustryStandard/FirmwareInterfaceTable.h b/MdePkg/Include/IndustryStandard/FirmwareInterfaceTable.h
> deleted file mode 100644
> index be3e34ae1b..0000000000
> --- a/MdePkg/Include/IndustryStandard/FirmwareInterfaceTable.h
> +++ /dev/null
> @@ -1,76 +0,0 @@
> -/** @file
> -  Industry Standard Definitions of Firmware Interface Table BIOS Specification 1.0.
> -
> -  Copyright (c) 2016 - 2020, Intel Corporation. All rights reserved.<BR>
> -  SPDX-License-Identifier: BSD-2-Clause-Patent
> -
> -**/
> -
> -#ifndef __FIRMWARE_INTERFACE_TABLE_H__
> -#define __FIRMWARE_INTERFACE_TABLE_H__
> -
> -//
> -// FIT Entry type definitions
> -//
> -#define FIT_TYPE_00_HEADER                  0x00
> -#define FIT_TYPE_01_MICROCODE               0x01
> -#define FIT_TYPE_02_STARTUP_ACM             0x02
> -#define FIT_TYPE_07_BIOS_STARTUP_MODULE     0x07
> -#define FIT_TYPE_08_TPM_POLICY              0x08
> -#define FIT_TYPE_09_BIOS_POLICY             0x09
> -#define FIT_TYPE_0A_TXT_POLICY              0x0A
> -#define FIT_TYPE_0B_KEY_MANIFEST            0x0B
> -#define FIT_TYPE_0C_BOOT_POLICY_MANIFEST    0x0C
> -#define FIT_TYPE_10_CSE_SECURE_BOOT         0x10
> -#define FIT_TYPE_2D_TXTSX_POLICY            0x2D
> -#define FIT_TYPE_2F_JMP_DEBUG_POLICY        0x2F
> -#define FIT_TYPE_7F_SKIP                    0x7F
> -
> -#define FIT_POINTER_ADDRESS                 0xFFFFFFC0 ///< Fixed address at 4G - 40h
> -
> -#define FIT_TYPE_VERSION                    0x0100
> -
> -#define FIT_TYPE_00_SIGNATURE  SIGNATURE_64 ('_', 'F', 'I', 'T', '_', ' ', ' ', ' ')
> -
> -#pragma pack(1)
> -
> -typedef struct {
> -  //
> -  // Address is the base address of the firmware component
> -  // must be aligned on 16 byte boundary
> -  //
> -  UINT64 Address;
> -  //
> -  // Size is the span of the component in multiple of 16 bytes
> -  //
> -  UINT8  Size[3];
> -  //
> -  // Reserved must be set to 0
> -  //
> -  UINT8  Reserved;
> -  //
> -  // Component's version number in binary coded decimal (BCD) format.
> -  // For the FIT header entry, the value in this field will indicate the revision
> -  // number of the FIT data structure. The upper byte of the revision field
> -  // indicates the major revision and the lower byte indicates the minor revision.
> -  //
> -  UINT16 Version;
> -  //
> -  // FIT types 0x00 to 0x7F
> -  //
> -  UINT8  Type : 7;
> -  //
> -  // Checksum Valid indicates whether component has valid checksum.
> -  //
> -  UINT8  C_V  : 1;
> -  //
> -  // Component's checksum. The modulo sum of all the bytes in the component and
> -  // the value in this field (Chksum) must add up to zero. This field is only
> -  // valid if the C_V flag is non-zero.
> -  //
> -  UINT8  Chksum;
> -} FIRMWARE_INTERFACE_TABLE_ENTRY;
> -
> -#pragma pack()
> -
> -#endif
> --
> 2.19.1.windows.1