From: <Jim.Dailey@dell.com>
To: <ruiyu.ni@intel.com>
Cc: <edk2-devel@lists.01.org>, <jaben.carsey@intel.com>
Subject: Re: [PATCH] ShellPkg/set: Fix EfiShellSetEnv to use case sensitive compare
Date: Tue, 7 Aug 2018 18:27:13 +0000 [thread overview]
Message-ID: <1a93054aa36c45788250727380c51034@ausx13mps335.AMER.DELL.COM> (raw)
In-Reply-To: <CB6E33457884FA40993F35157061515CA410E2E3@FMSMSX103.amr.corp.intel.com>
Ray,
Table 8 in version 2.2 of the Shell Spec says "lasterror" (lower-case L). Why
compare to "Lasterror"?
Regards,
Jim
-----Original Message-----
From: Carsey, Jaben [mailto:jaben.carsey@intel.com]
Sent: Tuesday, August 7, 2018 12:57 PM
To: Ni, Ruiyu; edk2-devel@lists.01.org
Cc: Dailey, Jim
Subject: RE: [PATCH] ShellPkg/set: Fix EfiShellSetEnv to use case sensitive compare
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
> -----Original Message-----
> From: Ni, Ruiyu
> Sent: Tuesday, August 07, 2018 2:14 AM
> To: edk2-devel@lists.01.org
> Cc: Carsey, Jaben <jaben.carsey@intel.com>; Jim Dailey
> <jim_dailey@dell.com>
> Subject: [PATCH] ShellPkg/set: Fix EfiShellSetEnv to use case sensitive
> compare
> Importance: High
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=777
>
> Per Shell spec, the environment variable has a case-sensitive name.
> But today's implementation of EfiShellSetEnv() compares the
> environment variable name case insensitively, which causes variable
> like "CWD" cannot be set due to "cwd" is pre-defined variable.
>
> The patch fixes this issue.
>
> The EfiShellGetEnv() doesn't have such issue because it will
> call into ShellFindEnvVarInList() which uses StrCmp().
>
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
> Cc: Jaben Carsey <jaben.carsey@intel.com>
> Cc: Jim Dailey <jim_dailey@dell.com>
> ---
> ShellPkg/Application/Shell/ShellProtocol.c | 39 +++++++-----------------------
> 1 file changed, 9 insertions(+), 30 deletions(-)
>
> diff --git a/ShellPkg/Application/Shell/ShellProtocol.c
> b/ShellPkg/Application/Shell/ShellProtocol.c
> index f2ca2029e3..767cbc99a0 100644
> --- a/ShellPkg/Application/Shell/ShellProtocol.c
> +++ b/ShellPkg/Application/Shell/ShellProtocol.c
> @@ -2924,36 +2924,15 @@ EfiShellSetEnv(
> //
> // Make sure we dont 'set' a predefined read only variable
> //
> - if (gUnicodeCollation->StriColl(
> - gUnicodeCollation,
> - (CHAR16*)Name,
> - L"cwd") == 0
> - ||gUnicodeCollation->StriColl(
> - gUnicodeCollation,
> - (CHAR16*)Name,
> - L"Lasterror") == 0
> - ||gUnicodeCollation->StriColl(
> - gUnicodeCollation,
> - (CHAR16*)Name,
> - L"profiles") == 0
> - ||gUnicodeCollation->StriColl(
> - gUnicodeCollation,
> - (CHAR16*)Name,
> - L"uefishellsupport") == 0
> - ||gUnicodeCollation->StriColl(
> - gUnicodeCollation,
> - (CHAR16*)Name,
> - L"uefishellversion") == 0
> - ||gUnicodeCollation->StriColl(
> - gUnicodeCollation,
> - (CHAR16*)Name,
> - L"uefiversion") == 0
> - ||(!ShellInfoObject.ShellInitSettings.BitUnion.Bits.NoNest &&
> - gUnicodeCollation->StriColl(
> - gUnicodeCollation,
> - (CHAR16*)Name,
> - (CHAR16*)mNoNestingEnvVarName) == 0)
> - ){
> + if ((StrCmp (Name, L"cwd") == 0) ||
> + (StrCmp (Name, L"Lasterror") == 0) ||
> + (StrCmp (Name, L"profiles") == 0) ||
> + (StrCmp (Name, L"uefishellsupport") == 0) ||
> + (StrCmp (Name, L"uefishellversion") == 0) ||
> + (StrCmp (Name, L"uefiversion") == 0) ||
> + (!ShellInfoObject.ShellInitSettings.BitUnion.Bits.NoNest &&
> + StrCmp (Name, mNoNestingEnvVarName) == 0)
> + ) {
> return (EFI_INVALID_PARAMETER);
> }
> return (InternalEfiShellSetEnv(Name, Value, Volatile));
> --
> 2.16.1.windows.1
next prev parent reply other threads:[~2018-08-07 18:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-07 9:14 [PATCH] ShellPkg/set: Fix EfiShellSetEnv to use case sensitive compare Ruiyu Ni
2018-08-07 17:57 ` Carsey, Jaben
2018-08-07 18:27 ` Jim.Dailey [this message]
2018-08-08 5:03 ` Ni, Ruiyu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1a93054aa36c45788250727380c51034@ausx13mps335.AMER.DELL.COM \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox