From: Ruiyu Ni <ruiyu.ni@intel.com>
To: edk2-devel@lists.01.org
Cc: Liming Gao <liming.gao@intel.com>, Jeff Fan <jeff.fan@intel.com>
Subject: [PATCH v4 6/6] MdePkg/Pci22.h: Deprecate out-of-Spec IncompatiblePciDevice macros
Date: Thu, 9 Feb 2017 10:06:59 +0800 [thread overview]
Message-ID: <20170209020659.41512-1-ruiyu.ni@intel.com> (raw)
In-Reply-To: <20170208094258.59568-2-ruiyu.ni@intel.com>
DEVICE_ID_NOCARE is defined as 0xFFFF but Spec says (UINT64) -1
should be used to match any VendorId/DeviceId/RevisionId/
SubsystemVendorId/SubsystemDeviceId.
PCI_BAR_OLD_ALIGN/PCI_BAR_EVEN_ALIGN/PCI_BAR_SQUAD_ALIGN/
PCI_BAR_DQUAD_ALIGN are defined but Spec doesn't have such
definitions.
PCI_BAR_ALL is defined as 0xFF but Spec says (UINT64)-1 should be
used to match all BARs.
PCI_ACPI_UNUSED and PCI_BAR_NOCHANGE are defined as 0 which
compliant with Spec but the name is too general and causes confusing.
IncompatiblePciDeviceSupport could directly use 0.
All of the above macros are marked as deprecated.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jeff Fan <jeff.fan@intel.com>
---
MdePkg/Include/IndustryStandard/Pci22.h | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/MdePkg/Include/IndustryStandard/Pci22.h b/MdePkg/Include/IndustryStandard/Pci22.h
index 4cf8389..07718dc 100644
--- a/MdePkg/Include/IndustryStandard/Pci22.h
+++ b/MdePkg/Include/IndustryStandard/Pci22.h
@@ -7,7 +7,7 @@
PC Card Standard, 8.0
PCI Power Management Interface Specifiction, Revision 1.2
- Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>
Copyright (c) 2014 - 2015, Hewlett-Packard Development Company, L.P.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
@@ -780,14 +780,24 @@ typedef struct {
///
} EFI_PCI_CAPABILITY_HOTPLUG;
-#define DEVICE_ID_NOCARE 0xFFFF
+///
+/// Below macros (till PCI_BAR_NOCHANGE) were used by EfiIncompatiblePciDeviceSupport Protocol.
+///
+#ifndef DISABLE_NEW_DEPRECATED_INTERFACES
+
+///
+/// [ATTENTION] These macros are deprecated because they don't match Spec or not defined in Spec.
+///
+#define DEVICE_ID_NOCARE 0xFFFF ///< Deprecated. Value doesn't match Spec.
+#define PCI_BAR_OLD_ALIGN 0xFFFFFFFFFFFFFFFFULL ///< Deprecated. Value isn't defined in Spec.
+#define PCI_BAR_EVEN_ALIGN 0xFFFFFFFFFFFFFFFEULL ///< Deprecated. Value isn't defined in Spec.
+#define PCI_BAR_SQUAD_ALIGN 0xFFFFFFFFFFFFFFFDULL ///< Deprecated. Value isn't defined in Spec.
+#define PCI_BAR_DQUAD_ALIGN 0xFFFFFFFFFFFFFFFCULL ///< Deprecated. Value isn't defined in Spec.
+#define PCI_BAR_ALL 0xFF ///< Deprecated. Value doesn't match Spec.
+#define PCI_ACPI_UNUSED 0 ///< Deprecated. Macro name is too general.
+#define PCI_BAR_NOCHANGE 0 ///< Deprecated. Macro name is too general.
-#define PCI_ACPI_UNUSED 0
-#define PCI_BAR_NOCHANGE 0
-#define PCI_BAR_OLD_ALIGN 0xFFFFFFFFFFFFFFFFULL
-#define PCI_BAR_EVEN_ALIGN 0xFFFFFFFFFFFFFFFEULL
-#define PCI_BAR_SQUAD_ALIGN 0xFFFFFFFFFFFFFFFDULL
-#define PCI_BAR_DQUAD_ALIGN 0xFFFFFFFFFFFFFFFCULL
+#endif
#define PCI_BAR_IDX0 0x00
#define PCI_BAR_IDX1 0x01
@@ -795,7 +805,6 @@ typedef struct {
#define PCI_BAR_IDX3 0x03
#define PCI_BAR_IDX4 0x04
#define PCI_BAR_IDX5 0x05
-#define PCI_BAR_ALL 0xFF
///
/// EFI PCI Option ROM definitions
--
2.9.0.windows.1
next prev parent reply other threads:[~2017-02-09 2:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-08 9:42 [PATCH v4 0/6] Fix PciBus to accept Spec values as BarIndex and Alignment Ruiyu Ni
2017-02-08 9:42 ` [PATCH v4 6/6] MdePkg/Pci22.h: Deprecate out-of-Spec IncompatiblePciDevice macros Ruiyu Ni
2017-02-08 10:44 ` Laszlo Ersek
2017-02-09 2:10 ` Ni, Ruiyu
2017-02-09 2:06 ` Ruiyu Ni [this message]
2017-02-09 19:47 ` Laszlo Ersek
2017-02-10 3:13 ` Gao, Liming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170209020659.41512-1-ruiyu.ni@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox