From: Ruiyu Ni <ruiyu.ni@intel.com>
To: edk2-devel@lists.01.org
Cc: Liming Gao <liming.gao@intel.com>,
Jiewen Yao <jiewen.yao@intel.com>,
Siyuan Fu <siyuan.fu@intel.com>
Subject: [PATCH 04/11] MdePkg/BaseLib: Add StrToGuid/StrHexToBytes/StrToIpv[4/6]Address
Date: Wed, 22 Feb 2017 12:50:40 +0800 [thread overview]
Message-ID: <20170222045047.558308-5-ruiyu.ni@intel.com> (raw)
In-Reply-To: <20170222045047.558308-1-ruiyu.ni@intel.com>
The patch adds 4 APIs to convert Unicode string to GUID, bytes
buffer, IP v4 address and IP v6 address.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
---
MdePkg/Include/Library/BaseLib.h | 241 ++++++++++++++
MdePkg/Library/BaseLib/SafeString.c | 623 ++++++++++++++++++++++++++++++++++++
2 files changed, 864 insertions(+)
diff --git a/MdePkg/Include/Library/BaseLib.h b/MdePkg/Include/Library/BaseLib.h
index d71ccb7..8aac4c8 100644
--- a/MdePkg/Include/Library/BaseLib.h
+++ b/MdePkg/Include/Library/BaseLib.h
@@ -1536,6 +1536,247 @@ StrHexToUint64 (
IN CONST CHAR16 *String
);
+/**
+ Convert a Null-terminated Unicode string to IPv6 address and prefix length.
+
+ This function outputs a value of type IPv6_ADDRESS and may output a value
+ of type UINT8 by interpreting the contents of the Unicode string specified
+ by String. The format of the input Unicode string String is as follows:
+
+ X:X:X:X:X:X:X:X[/P]
+
+ X contains one to four hexadecimal digit characters in the range [0-9], [a-f] and
+ [A-F]. X is converted to a value of type UINT16, whose low byte is stored in low
+ memory address and high byte is stored in high memory address. P contains decimal
+ digit characters in the range [0-9]. The running zero in the beginning of P will
+ be ignored. /P is optional.
+
+ When /P is not in the String, the function stops at the first character that is
+ not a valid hexadecimal digit character after eight X's are converted.
+
+ When /P is in the String, the function stops at the first character that is not
+ a valid decimal digit character after P is converted.
+
+ "::" can be used to compress one or more groups of X when X contains only 0.
+ The "::" can only appear once in the String.
+
+ If String is NULL, then ASSERT().
+
+ If Address is NULL, then ASSERT().
+
+ If String is not aligned in a 16-bit boundary, then ASSERT().
+
+ If PcdMaximumUnicodeStringLength is not zero, and String contains more than
+ PcdMaximumUnicodeStringLength Unicode characters, not including the
+ Null-terminator, then ASSERT().
+
+ If EndPointer is not NULL and Address is translated from String, a pointer
+ to the character that stopped the scan is stored at the location pointed to
+ by EndPointer.
+
+ @param String Pointer to a Null-terminated Unicode string.
+ @param EndPointer Pointer to character that stops scan.
+ @param Address Pointer to the converted IPv6 address.
+ @param PrefixLength Pointer to the converted IPv6 address prefix
+ length. MAX_UINT8 is returned when /P is
+ not in the String.
+
+ @retval RETURN_SUCCESS Address is translated from String.
+ @retval RETURN_INVALID_PARAMETER If String is NULL.
+ If Data is NULL.
+ If PcdMaximumUnicodeStringLength is not
+ zero, and String contains more than
+ PcdMaximumUnicodeStringLength Unicode
+ characters, not including the
+ Null-terminator.
+ If X contains more than four hexadecimal
+ digit characters.
+ If String contains "::" and number of X
+ is not less than 8.
+ If P starts with character that is not a
+ valid decimal digit character.
+ If the decimal number converted from P
+ exceeds 128.
+
+**/
+RETURN_STATUS
+EFIAPI
+StrToIpv6Address (
+ IN CONST CHAR16 *String,
+ OUT CHAR16 **EndPointer, OPTIONAL
+ OUT IPv6_ADDRESS *Address,
+ OUT UINT8 *PrefixLength OPTIONAL
+ );
+
+/**
+ Convert a Null-terminated Unicode string to IPv4 address and prefix length.
+
+ This function outputs a value of type IPv4_ADDRESS and may output a value
+ of type UINT8 by interpreting the contents of the Unicode string specified
+ by String. The format of the input Unicode string String is as follows:
+
+ D.D.D.D[/P]
+
+ D and P are decimal digit characters in the range [0-9]. The running zero in
+ the beginning of D and P will be ignored. /P is optional.
+
+ When /P is not in the String, the function stops at the first character that is
+ not a valid decimal digit character after four D's are converted.
+
+ When /P is in the String, the function stops at the first character that is not
+ a valid decimal digit character after P is converted.
+
+ If String is NULL, then ASSERT().
+
+ If Address is NULL, then ASSERT().
+
+ If String is not aligned in a 16-bit boundary, then ASSERT().
+
+ If PcdMaximumUnicodeStringLength is not zero, and String contains more than
+ PcdMaximumUnicodeStringLength Unicode characters, not including the
+ Null-terminator, then ASSERT().
+
+ If EndPointer is not NULL and Address is translated from String, a pointer
+ to the character that stopped the scan is stored at the location pointed to
+ by EndPointer.
+
+ @param String Pointer to a Null-terminated Unicode string.
+ @param EndPointer Pointer to character that stops scan.
+ @param Address Pointer to the converted IPv4 address.
+ @param PrefixLength Pointer to the converted IPv4 address prefix
+ length. MAX_UINT8 is returned when /P is
+ not in the String.
+
+ @retval RETURN_SUCCESS Address is translated from String.
+ @retval RETURN_INVALID_PARAMETER If String is NULL.
+ If Data is NULL.
+ If PcdMaximumUnicodeStringLength is not
+ zero, and String contains more than
+ PcdMaximumUnicodeStringLength Unicode
+ characters, not including the
+ Null-terminator.
+ If String is not in the correct format.
+ If any decimal number converted from D
+ exceeds 255.
+ If the decimal number converted from P
+ exceeds 32.
+
+**/
+RETURN_STATUS
+EFIAPI
+StrToIpv4Address (
+ IN CONST CHAR16 *String,
+ OUT CHAR16 **EndPointer, OPTIONAL
+ OUT IPv4_ADDRESS *Address,
+ OUT UINT8 *PrefixLength OPTIONAL
+ );
+
+#define GUID_STRING_LENGTH 36
+
+/**
+ Convert a Null-terminated Unicode GUID string to a value of type
+ EFI_GUID.
+
+ This function outputs a GUID value by interpreting the contents of
+ the Unicode string specified by String. The format of the input
+ Unicode string String consists of 36 characters, as follows:
+
+ aabbccdd-eeff-gghh-iijj-kkllmmnnoopp
+
+ The pairs aa - pp are two characters in the range [0-9], [a-f] and
+ [A-F], with each pair representing a single byte hexadecimal value.
+
+ The mapping between String and the EFI_GUID structure is as follows:
+ aa Data1[24:31]
+ bb Data1[16:23]
+ cc Data1[8:15]
+ dd Data1[0:7]
+ ee Data2[8:15]
+ ff Data2[0:7]
+ gg Data3[8:15]
+ hh Data3[0:7]
+ ii Data4[0:7]
+ jj Data4[8:15]
+ kk Data4[16:23]
+ ll Data4[24:31]
+ mm Data4[32:39]
+ nn Data4[40:47]
+ oo Data4[48:55]
+ pp Data4[56:63]
+
+ If String is NULL, then ASSERT().
+ If Guid is NULL, then ASSERT().
+ If String is not aligned in a 16-bit boundary, then ASSERT().
+
+ @param String Pointer to a Null-terminated Unicode string.
+ @param Guid Pointer to the converted GUID.
+
+ @retval RETURN_SUCCESS Guid is translated from String.
+ @retval RETURN_INVALID_PARAMETER If String is NULL.
+ If Data is NULL.
+ If String is not as the above format.
+
+**/
+RETURN_STATUS
+EFIAPI
+StrToGuid (
+ IN CONST CHAR16 *String,
+ OUT GUID *Guid
+ );
+
+/**
+ Convert a Null-terminated Unicode hexadecimal string to a byte array.
+
+ This function outputs a byte array by interpreting the contents of
+ the Unicode string specified by String in hexadecimal format. The format of
+ the input Unicode string String is:
+
+ [XX]*
+
+ X is a hexadecimal digit character in the range [0-9], [a-f] and [A-F].
+ The function decodes every two hexadecimal digit characters as one byte. The
+ decoding stops after Length of characters and outputs Buffer containing
+ (Length / 2) bytes.
+
+ If String is not aligned in a 16-bit boundary, then ASSERT().
+
+ If String is NULL, then ASSERT().
+
+ If Buffer is NULL, then ASSERT().
+
+ If Length is not multiple of 2, then ASSERT().
+
+ If PcdMaximumStringLength is not zero and Length is greater than
+ PcdMaximumAsciiStringLength, then ASSERT().
+
+ If MaxBufferSize is less than (Length / 2), then ASSERT().
+
+ @param String Pointer to a Null-terminated Unicode string.
+ @param Length The number of Unicode characters to decode.
+ @param Buffer Pointer to the converted bytes array.
+ @param MaxBufferSize The maximum size of Buffer.
+
+ @retval RETURN_SUCCESS Buffer is translated from String.
+ @retval RETURN_INVALID_PARAMETER If String is NULL.
+ If Data is NULL.
+ If Length is not multiple of 2.
+ If PcdMaximumStringLength is not zero,
+ and Length is greater than
+ PcdMaximumAsciiStringLength.
+ If Length of characters from String contain
+ a character that is not valid hexadecimal
+ digit characters, or a Null-terminator.
+ @retval RETURN_BUFFER_TOO_SMALL If MaxBufferSize is less than (Length / 2).
+**/
+RETURN_STATUS
+EFIAPI
+StrHexToBytes (
+ IN CONST CHAR16 *String,
+ IN UINTN Length,
+ OUT UINT8 *Buffer,
+ IN UINTN MaxBufferSize
+ );
+
#ifndef DISABLE_NEW_DEPRECATED_INTERFACES
/**
diff --git a/MdePkg/Library/BaseLib/SafeString.c b/MdePkg/Library/BaseLib/SafeString.c
index 315059e..ede1c99 100644
--- a/MdePkg/Library/BaseLib/SafeString.c
+++ b/MdePkg/Library/BaseLib/SafeString.c
@@ -1074,6 +1074,629 @@ StrHexToUint64S (
}
/**
+ Convert a Null-terminated Unicode string to IPv6 address and prefix length.
+
+ This function outputs a value of type IPv6_ADDRESS and may output a value
+ of type UINT8 by interpreting the contents of the Unicode string specified
+ by String. The format of the input Unicode string String is as follows:
+
+ X:X:X:X:X:X:X:X[/P]
+
+ X contains one to four hexadecimal digit characters in the range [0-9], [a-f] and
+ [A-F]. X is converted to a value of type UINT16, whose low byte is stored in low
+ memory address and high byte is stored in high memory address. P contains decimal
+ digit characters in the range [0-9]. The running zero in the beginning of P will
+ be ignored. /P is optional.
+
+ When /P is not in the String, the function stops at the first character that is
+ not a valid hexadecimal digit character after eight X's are converted.
+
+ When /P is in the String, the function stops at the first character that is not
+ a valid decimal digit character after P is converted.
+
+ "::" can be used to compress one or more groups of X when X contains only 0.
+ The "::" can only appear once in the String.
+
+ If String is NULL, then ASSERT().
+
+ If Address is NULL, then ASSERT().
+
+ If String is not aligned in a 16-bit boundary, then ASSERT().
+
+ If PcdMaximumUnicodeStringLength is not zero, and String contains more than
+ PcdMaximumUnicodeStringLength Unicode characters, not including the
+ Null-terminator, then ASSERT().
+
+ If EndPointer is not NULL and Address is translated from String, a pointer
+ to the character that stopped the scan is stored at the location pointed to
+ by EndPointer.
+
+ @param String Pointer to a Null-terminated Unicode string.
+ @param EndPointer Pointer to character that stops scan.
+ @param Address Pointer to the converted IPv6 address.
+ @param PrefixLength Pointer to the converted IPv6 address prefix
+ length. MAX_UINT8 is returned when /P is
+ not in the String.
+
+ @retval RETURN_SUCCESS Address is translated from String.
+ @retval RETURN_INVALID_PARAMETER If String is NULL.
+ If Data is NULL.
+ If PcdMaximumUnicodeStringLength is not
+ zero, and String contains more than
+ PcdMaximumUnicodeStringLength Unicode
+ characters, not including the
+ Null-terminator.
+ If X contains more than four hexadecimal
+ digit characters.
+ If String contains "::" and number of X
+ is not less than 8.
+ If P starts with character that is not a
+ valid decimal digit character.
+ If the decimal number converted from P
+ exceeds 128.
+
+**/
+RETURN_STATUS
+EFIAPI
+StrToIpv6Address (
+ IN CONST CHAR16 *String,
+ OUT CHAR16 **EndPointer, OPTIONAL
+ OUT IPv6_ADDRESS *Address,
+ OUT UINT8 *PrefixLength OPTIONAL
+ )
+{
+ RETURN_STATUS Status;
+ UINTN AddressIndex;
+ UINTN Uintn;
+ IPv6_ADDRESS LocalAddress;
+ UINT8 LocalPrefixLength;
+ CONST CHAR16 *Pointer;
+ CHAR16 *End;
+ UINTN CompressStart;
+ BOOLEAN ExpectPrefix;
+
+ LocalPrefixLength = MAX_UINT8;
+ CompressStart = ARRAY_SIZE (Address->Addr);
+ ExpectPrefix = FALSE;
+
+ ASSERT (((UINTN) String & BIT0) == 0);
+
+ //
+ // 1. None of String or Guid shall be a null pointer.
+ //
+ SAFE_STRING_CONSTRAINT_CHECK ((String != NULL), RETURN_INVALID_PARAMETER);
+ SAFE_STRING_CONSTRAINT_CHECK ((Address != NULL), RETURN_INVALID_PARAMETER);
+
+ for (Pointer = String, AddressIndex = 0; AddressIndex < ARRAY_SIZE (Address->Addr) + 1;) {
+ if (!InternalIsHexaDecimalDigitCharacter (*Pointer)) {
+ if (*Pointer != L':') {
+ //
+ // ":" or "/" should be followed by digit characters.
+ //
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ //
+ // Meet second ":" after previous ":" or "/"
+ // or meet first ":" in the beginning of String.
+ //
+ if (ExpectPrefix) {
+ //
+ // ":" shall not be after "/"
+ //
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ if (CompressStart != ARRAY_SIZE (Address->Addr) || AddressIndex == ARRAY_SIZE (Address->Addr)) {
+ //
+ // "::" can only appear once.
+ // "::" can only appear when address is not full length.
+ //
+ return RETURN_INVALID_PARAMETER;
+ } else {
+ //
+ // Remember the start of zero compressing.
+ //
+ CompressStart = AddressIndex;
+ Pointer++;
+
+ if (CompressStart == 0) {
+ if (*Pointer != L':') {
+ //
+ // Single ":" shall not be in the beginning of String.
+ //
+ return RETURN_INVALID_PARAMETER;
+ }
+ Pointer++;
+ }
+ }
+ }
+
+ if (!InternalIsHexaDecimalDigitCharacter (*Pointer)) {
+ if (*Pointer == L'/') {
+ //
+ // Might be optional "/P" after "::".
+ //
+ if (CompressStart != AddressIndex) {
+ return RETURN_INVALID_PARAMETER;
+ }
+ } else {
+ break;
+ }
+ } else {
+ if (!ExpectPrefix) {
+ //
+ // Get X.
+ //
+ Status = StrHexToUintnS (Pointer, &End, &Uintn);
+ if (RETURN_ERROR (Status) || End - Pointer > 4) {
+ //
+ // Number of hexadecimal digit characters is no more than 4.
+ //
+ return RETURN_INVALID_PARAMETER;
+ }
+ Pointer = End;
+ //
+ // Uintn won't exceed MAX_UINT16 if number of hexadecimal digit characters is no more than 4.
+ //
+ LocalAddress.Addr[AddressIndex] = (UINT8) ((UINT16) Uintn >> 8);
+ LocalAddress.Addr[AddressIndex + 1] = (UINT8) Uintn;
+ AddressIndex += 2;
+ } else {
+ //
+ // Get P, then exit the loop.
+ //
+ Status = StrDecimalToUintnS (Pointer, &End, &Uintn);
+ if (RETURN_ERROR (Status) || End == Pointer || Uintn > 128) {
+ //
+ // Prefix length should not exceed 128.
+ //
+ return RETURN_INVALID_PARAMETER;
+ }
+ LocalPrefixLength = (UINT8) Uintn;
+ Pointer = End;
+ break;
+ }
+ }
+
+ //
+ // Skip ':' or "/"
+ //
+ if (*Pointer == L'/') {
+ ExpectPrefix = TRUE;
+ } else if (*Pointer == L':') {
+ if (AddressIndex == ARRAY_SIZE (Address->Addr)) {
+ //
+ // Meet additional ":" after all 8 16-bit address
+ //
+ break;
+ }
+ } else {
+ //
+ // Meet other character that is not "/" or ":" after all 8 16-bit address
+ //
+ break;
+ }
+ Pointer++;
+ }
+
+ if ((AddressIndex == ARRAY_SIZE (Address->Addr) && CompressStart != ARRAY_SIZE (Address->Addr)) ||
+ (AddressIndex != ARRAY_SIZE (Address->Addr) && CompressStart == ARRAY_SIZE (Address->Addr))
+ ) {
+ //
+ // Full length of address shall not have compressing zeros.
+ // Non-full length of address shall have compressing zeros.
+ //
+ return RETURN_INVALID_PARAMETER;
+ }
+ CopyMem (&Address->Addr[0], &LocalAddress.Addr[0], CompressStart);
+ ZeroMem (&Address->Addr[CompressStart], ARRAY_SIZE (Address->Addr) - AddressIndex);
+ CopyMem (
+ &Address->Addr[CompressStart + ARRAY_SIZE (Address->Addr) - AddressIndex],
+ &LocalAddress.Addr[CompressStart],
+ AddressIndex - CompressStart
+ );
+
+ if (PrefixLength != NULL) {
+ *PrefixLength = LocalPrefixLength;
+ }
+ if (EndPointer != NULL) {
+ *EndPointer = (CHAR16 *) Pointer;
+ }
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Convert a Null-terminated Unicode string to IPv4 address and prefix length.
+
+ This function outputs a value of type IPv4_ADDRESS and may output a value
+ of type UINT8 by interpreting the contents of the Unicode string specified
+ by String. The format of the input Unicode string String is as follows:
+
+ D.D.D.D[/P]
+
+ D and P are decimal digit characters in the range [0-9]. The running zero in
+ the beginning of D and P will be ignored. /P is optional.
+
+ When /P is not in the String, the function stops at the first character that is
+ not a valid decimal digit character after four D's are converted.
+
+ When /P is in the String, the function stops at the first character that is not
+ a valid decimal digit character after P is converted.
+
+ If String is NULL, then ASSERT().
+
+ If Address is NULL, then ASSERT().
+
+ If String is not aligned in a 16-bit boundary, then ASSERT().
+
+ If PcdMaximumUnicodeStringLength is not zero, and String contains more than
+ PcdMaximumUnicodeStringLength Unicode characters, not including the
+ Null-terminator, then ASSERT().
+
+ If EndPointer is not NULL and Address is translated from String, a pointer
+ to the character that stopped the scan is stored at the location pointed to
+ by EndPointer.
+
+ @param String Pointer to a Null-terminated Unicode string.
+ @param EndPointer Pointer to character that stops scan.
+ @param Address Pointer to the converted IPv4 address.
+ @param PrefixLength Pointer to the converted IPv4 address prefix
+ length. MAX_UINT8 is returned when /P is
+ not in the String.
+
+ @retval RETURN_SUCCESS Address is translated from String.
+ @retval RETURN_INVALID_PARAMETER If String is NULL.
+ If Data is NULL.
+ If PcdMaximumUnicodeStringLength is not
+ zero, and String contains more than
+ PcdMaximumUnicodeStringLength Unicode
+ characters, not including the
+ Null-terminator.
+ If String is not in the correct format.
+ If any decimal number converted from D
+ exceeds 255.
+ If the decimal number converted from P
+ exceeds 32.
+
+**/
+RETURN_STATUS
+EFIAPI
+StrToIpv4Address (
+ IN CONST CHAR16 *String,
+ OUT CHAR16 **EndPointer, OPTIONAL
+ OUT IPv4_ADDRESS *Address,
+ OUT UINT8 *PrefixLength OPTIONAL
+ )
+{
+ RETURN_STATUS Status;
+ UINTN AddressIndex;
+ UINTN Uintn;
+ IPv4_ADDRESS LocalAddress;
+ UINT8 LocalPrefixLength;
+ CHAR16 *Pointer;
+
+ LocalPrefixLength = MAX_UINT8;
+
+ ASSERT (((UINTN) String & BIT0) == 0);
+
+ //
+ // 1. None of String or Guid shall be a null pointer.
+ //
+ SAFE_STRING_CONSTRAINT_CHECK ((String != NULL), RETURN_INVALID_PARAMETER);
+ SAFE_STRING_CONSTRAINT_CHECK ((Address != NULL), RETURN_INVALID_PARAMETER);
+
+ for (Pointer = (CHAR16 *) String, AddressIndex = 0; AddressIndex < ARRAY_SIZE (Address->Addr) + 1;) {
+ if (!InternalIsDecimalDigitCharacter (*Pointer)) {
+ //
+ // D or P contains invalid characters.
+ //
+ break;
+ }
+
+ //
+ // Get D or P.
+ //
+ Status = StrDecimalToUintnS ((CONST CHAR16 *) Pointer, &Pointer, &Uintn);
+ if (RETURN_ERROR (Status)) {
+ return RETURN_INVALID_PARAMETER;
+ }
+ if (AddressIndex == ARRAY_SIZE (Address->Addr)) {
+ //
+ // It's P.
+ //
+ if (Uintn > 32) {
+ return RETURN_INVALID_PARAMETER;
+ }
+ LocalPrefixLength = (UINT8) Uintn;
+ } else {
+ //
+ // It's D.
+ //
+ if (Uintn > MAX_UINT8) {
+ return RETURN_INVALID_PARAMETER;
+ }
+ LocalAddress.Addr[AddressIndex] = (UINT8) Uintn;
+ AddressIndex++;
+ }
+
+ //
+ // Check the '.' or '/', depending on the AddressIndex.
+ //
+ if (AddressIndex == ARRAY_SIZE (Address->Addr)) {
+ if (*Pointer == L'/') {
+ //
+ // '/P' is in the String.
+ // Skip "/" and get P in next loop.
+ //
+ Pointer++;
+ } else {
+ //
+ // '/P' is not in the String.
+ //
+ break;
+ }
+ } else if (AddressIndex < ARRAY_SIZE (Address->Addr)) {
+ if (*Pointer == L'.') {
+ //
+ // D should be followed by '.'
+ //
+ Pointer++;
+ } else {
+ return RETURN_INVALID_PARAMETER;
+ }
+ }
+ }
+
+ if (AddressIndex < ARRAY_SIZE (Address->Addr)) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ CopyMem (Address, &LocalAddress, sizeof (*Address));
+ if (PrefixLength != NULL) {
+ *PrefixLength = LocalPrefixLength;
+ }
+ if (EndPointer != NULL) {
+ *EndPointer = Pointer;
+ }
+
+ return RETURN_SUCCESS;
+}
+
+/**
+ Convert a Null-terminated Unicode GUID string to a value of type
+ EFI_GUID.
+
+ This function outputs a GUID value by interpreting the contents of
+ the Unicode string specified by String. The format of the input
+ Unicode string String consists of 36 characters, as follows:
+
+ aabbccdd-eeff-gghh-iijj-kkllmmnnoopp
+
+ The pairs aa - pp are two characters in the range [0-9], [a-f] and
+ [A-F], with each pair representing a single byte hexadecimal value.
+
+ The mapping between String and the EFI_GUID structure is as follows:
+ aa Data1[24:31]
+ bb Data1[16:23]
+ cc Data1[8:15]
+ dd Data1[0:7]
+ ee Data2[8:15]
+ ff Data2[0:7]
+ gg Data3[8:15]
+ hh Data3[0:7]
+ ii Data4[0:7]
+ jj Data4[8:15]
+ kk Data4[16:23]
+ ll Data4[24:31]
+ mm Data4[32:39]
+ nn Data4[40:47]
+ oo Data4[48:55]
+ pp Data4[56:63]
+
+ If String is NULL, then ASSERT().
+ If Guid is NULL, then ASSERT().
+ If String is not aligned in a 16-bit boundary, then ASSERT().
+
+ @param String Pointer to a Null-terminated Unicode string.
+ @param Guid Pointer to the converted GUID.
+
+ @retval RETURN_SUCCESS Guid is translated from String.
+ @retval RETURN_INVALID_PARAMETER If String is NULL.
+ If Data is NULL.
+ If String is not as the above format.
+
+**/
+RETURN_STATUS
+EFIAPI
+StrToGuid (
+ IN CONST CHAR16 *String,
+ OUT GUID *Guid
+ )
+{
+ RETURN_STATUS Status;
+ GUID LocalGuid;
+
+ ASSERT (((UINTN) String & BIT0) == 0);
+
+ //
+ // 1. None of String or Guid shall be a null pointer.
+ //
+ SAFE_STRING_CONSTRAINT_CHECK ((String != NULL), RETURN_INVALID_PARAMETER);
+ SAFE_STRING_CONSTRAINT_CHECK ((Guid != NULL), RETURN_INVALID_PARAMETER);
+
+ //
+ // Get aabbccdd in big-endian.
+ //
+ Status = StrHexToBytes (String, 2 * sizeof (LocalGuid.Data1), (UINT8 *) &LocalGuid.Data1, sizeof (LocalGuid.Data1));
+ if (RETURN_ERROR (Status) || String[2 * sizeof (LocalGuid.Data1)] != L'-') {
+ return RETURN_INVALID_PARAMETER;
+ }
+ //
+ // Convert big-endian to little-endian.
+ //
+ LocalGuid.Data1 = SwapBytes32 (LocalGuid.Data1);
+ String += 2 * sizeof (LocalGuid.Data1) + 1;
+
+ //
+ // Get eeff in big-endian.
+ //
+ Status = StrHexToBytes (String, 2 * sizeof (LocalGuid.Data2), (UINT8 *) &LocalGuid.Data2, sizeof (LocalGuid.Data2));
+ if (RETURN_ERROR (Status) || String[2 * sizeof (LocalGuid.Data2)] != L'-') {
+ return RETURN_INVALID_PARAMETER;
+ }
+ //
+ // Convert big-endian to little-endian.
+ //
+ LocalGuid.Data2 = SwapBytes16 (LocalGuid.Data2);
+ String += 2 * sizeof (LocalGuid.Data2) + 1;
+
+ //
+ // Get gghh in big-endian.
+ //
+ Status = StrHexToBytes (String, 2 * sizeof (LocalGuid.Data3), (UINT8 *) &LocalGuid.Data3, sizeof (LocalGuid.Data3));
+ if (RETURN_ERROR (Status) || String[2 * sizeof (LocalGuid.Data3)] != L'-') {
+ return RETURN_INVALID_PARAMETER;
+ }
+ //
+ // Convert big-endian to little-endian.
+ //
+ LocalGuid.Data3 = SwapBytes16 (LocalGuid.Data3);
+ String += 2 * sizeof (LocalGuid.Data3) + 1;
+
+ //
+ // Get iijj.
+ //
+ Status = StrHexToBytes (String, 2 * 2, &LocalGuid.Data4[0], 2);
+ if (RETURN_ERROR (Status) || String[2 * 2] != L'-') {
+ return RETURN_INVALID_PARAMETER;
+ }
+ String += 2 * 2 + 1;
+
+ //
+ // Get kkllmmnnoopp.
+ //
+ Status = StrHexToBytes (String, 2 * 6, &LocalGuid.Data4[2], 6);
+ if (RETURN_ERROR (Status)) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ CopyGuid (Guid, &LocalGuid);
+ return RETURN_SUCCESS;
+}
+
+/**
+ Convert a Null-terminated Unicode hexadecimal string to a byte array.
+
+ This function outputs a byte array by interpreting the contents of
+ the Unicode string specified by String in hexadecimal format. The format of
+ the input Unicode string String is:
+
+ [XX]*
+
+ X is a hexadecimal digit character in the range [0-9], [a-f] and [A-F].
+ The function decodes every two hexadecimal digit characters as one byte. The
+ decoding stops after Length of characters and outputs Buffer containing
+ (Length / 2) bytes.
+
+ If String is not aligned in a 16-bit boundary, then ASSERT().
+
+ If String is NULL, then ASSERT().
+
+ If Buffer is NULL, then ASSERT().
+
+ If Length is not multiple of 2, then ASSERT().
+
+ If PcdMaximumStringLength is not zero and Length is greater than
+ PcdMaximumAsciiStringLength, then ASSERT().
+
+ If MaxBufferSize is less than (Length / 2), then ASSERT().
+
+ @param String Pointer to a Null-terminated Unicode string.
+ @param Length The number of Unicode characters to decode.
+ @param Buffer Pointer to the converted bytes array.
+ @param MaxBufferSize The maximum size of Buffer.
+
+ @retval RETURN_SUCCESS Buffer is translated from String.
+ @retval RETURN_INVALID_PARAMETER If String is NULL.
+ If Data is NULL.
+ If Length is not multiple of 2.
+ If PcdMaximumStringLength is not zero,
+ and Length is greater than
+ PcdMaximumAsciiStringLength.
+ If Length of characters from String contain
+ a character that is not valid hexadecimal
+ digit characters, or a Null-terminator.
+ @retval RETURN_BUFFER_TOO_SMALL If MaxBufferSize is less than (Length / 2).
+**/
+RETURN_STATUS
+EFIAPI
+StrHexToBytes (
+ IN CONST CHAR16 *String,
+ IN UINTN Length,
+ OUT UINT8 *Buffer,
+ IN UINTN MaxBufferSize
+ )
+{
+ UINTN Index;
+
+ ASSERT (((UINTN) String & BIT0) == 0);
+
+ //
+ // 1. None of String or Buffer shall be a null pointer.
+ //
+ SAFE_STRING_CONSTRAINT_CHECK ((String != NULL), RETURN_INVALID_PARAMETER);
+ SAFE_STRING_CONSTRAINT_CHECK ((Buffer != NULL), RETURN_INVALID_PARAMETER);
+
+ //
+ // 2. Length shall not be greater than RSIZE_MAX.
+ //
+ if (RSIZE_MAX != 0) {
+ SAFE_STRING_CONSTRAINT_CHECK ((Length <= RSIZE_MAX), RETURN_INVALID_PARAMETER);
+ }
+
+ //
+ // 3. Length shall not be odd.
+ //
+ SAFE_STRING_CONSTRAINT_CHECK (((Length & BIT0) == 0), RETURN_INVALID_PARAMETER);
+
+ //
+ // 4. MaxBufferSize shall equal to or greater than Length / 2.
+ //
+ SAFE_STRING_CONSTRAINT_CHECK ((MaxBufferSize >= Length / 2), RETURN_BUFFER_TOO_SMALL);
+
+ //
+ // 5. String shall not contains invalid hexadecimal digits.
+ //
+ for (Index = 0; Index < Length; Index++) {
+ if (!InternalIsHexaDecimalDigitCharacter (String[Index])) {
+ break;
+ }
+ }
+ if (Index != Length) {
+ return RETURN_INVALID_PARAMETER;
+ }
+
+ //
+ // Convert the hex string to bytes.
+ //
+ for(Index = 0; Index < Length; Index++) {
+
+ //
+ // For even characters, write the upper nibble for each buffer byte,
+ // and for even characters, the lower nibble.
+ //
+ if ((Index & BIT0) == 0) {
+ Buffer[Index / 2] = (UINT8) InternalHexCharToUintn (String[Index]) << 4;
+ } else {
+ Buffer[Index / 2] |= (UINT8) InternalHexCharToUintn (String[Index]);
+ }
+ }
+ return RETURN_SUCCESS;
+}
+
+/**
Returns the length of a Null-terminated Ascii string.
This function is similar as strlen_s defined in C11.
--
2.9.0.windows.1
next prev parent reply other threads:[~2017-02-22 4:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-22 4:50 [PATCH 00/11] Add StrToGuid/HexToBytes/Ipv4/Ipv6 in BaseLib Ruiyu Ni
2017-02-22 4:50 ` [PATCH 01/11] MdePkg: Define IPv4_ADDRESS and IPv6_ADDRESS in Base.h Ruiyu Ni
2017-02-22 4:50 ` [PATCH 02/11] MdePkg/UefiDevicePathLib: Rename StrToGuid to avoid link failure Ruiyu Ni
2017-02-22 4:50 ` [PATCH 03/11] SignedCapsulePkg/IniParsing: " Ruiyu Ni
2017-02-22 4:50 ` Ruiyu Ni [this message]
2017-02-22 6:02 ` [PATCH 04/11] MdePkg/BaseLib: Add StrToGuid/StrHexToBytes/StrToIpv[4/6]Address Yao, Jiewen
2017-02-22 7:58 ` Ni, Ruiyu
2017-02-22 8:14 ` Yao, Jiewen
2017-02-22 4:50 ` [PATCH 05/11] MdePkg/BaseLib: Add AsciiStrToGuid/HexToBytes/ToIpv[4/6]Address Ruiyu Ni
2017-02-22 4:50 ` [PATCH 06/11] MdePkg/UefiDevicePathLib: Use BaseLib string conversion services Ruiyu Ni
2017-02-22 4:50 ` [PATCH 07/11] MdeModulePkg/CapsuleApp: Use StrToGuid in BaseLib Ruiyu Ni
2017-02-22 4:50 ` [PATCH 08/11] SecurityPkg/SecureBootConfigDxe: " Ruiyu Ni
2017-02-22 4:50 ` [PATCH 09/11] ShellPkg/Debug1CommandLib: Use StrToGuid/StrHexToBytes " Ruiyu Ni
2017-02-22 4:50 ` [PATCH 10/11] SignedCapsulePkg/IniParsingLib: Use AsciiStrToGuid " Ruiyu Ni
2017-02-22 5:28 ` Yao, Jiewen
2017-02-22 7:40 ` Ni, Ruiyu
2017-02-22 4:50 ` [PATCH 11/11] MdeModulePkg/NetLib: Use StrToIpv4/6Address " Ruiyu Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170222045047.558308-5-ruiyu.ni@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox