From: Ruiyu Ni <ruiyu.ni@intel.com>
To: edk2-devel@lists.01.org
Cc: Jiewen Yao <jiewen.yao@intel.com>
Subject: [PATCH 08/11] SecurityPkg/SecureBootConfigDxe: Use StrToGuid in BaseLib
Date: Wed, 22 Feb 2017 12:50:44 +0800 [thread overview]
Message-ID: <20170222045047.558308-9-ruiyu.ni@intel.com> (raw)
In-Reply-To: <20170222045047.558308-1-ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
---
.../SecureBootConfigDxe/SecureBootConfigImpl.c | 11 +-
.../SecureBootConfigDxe/SecureBootConfigImpl.h | 22 +---
.../SecureBootConfigDxe/SecureBootConfigMisc.c | 141 +--------------------
3 files changed, 6 insertions(+), 168 deletions(-)
diff --git a/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c b/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c
index 0d96185..9b7d0c1 100644
--- a/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c
+++ b/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.c
@@ -1,7 +1,7 @@
/** @file
HII Config Access protocol implementation of SecureBoot configuration module.
-Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2011 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -3636,12 +3636,9 @@ SecureBootCallback (
case KEY_SECURE_BOOT_SIGNATURE_GUID_DBX:
case KEY_SECURE_BOOT_SIGNATURE_GUID_DBT:
ASSERT (Private->SignatureGUID != NULL);
- Status = StringToGuid (
- IfrNvData->SignatureGuid,
- StrLen (IfrNvData->SignatureGuid),
- Private->SignatureGUID
- );
- if (EFI_ERROR (Status)) {
+ if (RETURN_ERROR (StrToGuid (IfrNvData->SignatureGuid, Private->SignatureGUID)) ||
+ (IfrNvData->SignatureGuid[GUID_STRING_LENGTH] != L'\0')) {
+ Status = EFI_INVALID_PARAMETER;
break;
}
diff --git a/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.h b/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.h
index 5055a9e..aa58c44 100644
--- a/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.h
+++ b/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigImpl.h
@@ -2,7 +2,7 @@
The header file of HII Config Access protocol implementation of SecureBoot
configuration module.
-Copyright (c) 2011 - 2016, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2011 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -479,26 +479,6 @@ Int2OctStr (
IN UINTN OSSizeInBytes
);
-
-/**
- Convert a String to Guid Value.
-
- @param[in] Str Specifies the String to be converted.
- @param[in] StrLen Number of Unicode Characters of String (exclusive \0)
- @param[out] Guid Return the result Guid value.
-
- @retval EFI_SUCCESS The operation is finished successfully.
- @retval EFI_NOT_FOUND Invalid string.
-
-**/
-EFI_STATUS
-StringToGuid (
- IN CHAR16 *Str,
- IN UINTN StrLen,
- OUT EFI_GUID *Guid
- );
-
-
/**
Worker function that prints an EFI_GUID into specified Buffer.
diff --git a/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigMisc.c b/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigMisc.c
index a83504e..038707c 100644
--- a/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigMisc.c
+++ b/SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigMisc.c
@@ -1,7 +1,7 @@
/** @file
Helper functions for SecureBoot configuration module.
-Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
+Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -152,145 +152,6 @@ Int2OctStr (
return EFI_SUCCESS;
}
-
-
-/**
- Convert a String to Guid Value.
-
- @param[in] Str Specifies the String to be converted.
- @param[in] StrLen Number of Unicode Characters of String (exclusive \0)
- @param[out] Guid Return the result Guid value.
-
- @retval EFI_SUCCESS The operation is finished successfully.
- @retval EFI_NOT_FOUND Invalid string.
-
-**/
-EFI_STATUS
-StringToGuid (
- IN CHAR16 *Str,
- IN UINTN StrLen,
- OUT EFI_GUID *Guid
- )
-{
- CHAR16 *PtrBuffer;
- CHAR16 *PtrPosition;
- UINT16 *Buffer;
- UINTN Data;
- UINTN Index;
- UINT16 Digits[3];
-
- Buffer = (CHAR16 *) AllocateZeroPool (sizeof (CHAR16) * (StrLen + 1));
- if (Buffer == NULL) {
- return EFI_OUT_OF_RESOURCES;
- }
-
- StrCpyS (Buffer, (StrLen + 1), Str);
-
- //
- // Data1
- //
- PtrBuffer = Buffer;
- PtrPosition = PtrBuffer;
- while (*PtrBuffer != L'\0') {
- if (*PtrBuffer == L'-') {
- break;
- }
- PtrBuffer++;
- }
- if (*PtrBuffer == L'\0') {
- FreePool (Buffer);
- return EFI_NOT_FOUND;
- }
-
- *PtrBuffer = L'\0';
- Data = StrHexToUintn (PtrPosition);
- Guid->Data1 = (UINT32)Data;
-
- //
- // Data2
- //
- PtrBuffer++;
- PtrPosition = PtrBuffer;
- while (*PtrBuffer != L'\0') {
- if (*PtrBuffer == L'-') {
- break;
- }
- PtrBuffer++;
- }
- if (*PtrBuffer == L'\0') {
- FreePool (Buffer);
- return EFI_NOT_FOUND;
- }
- *PtrBuffer = L'\0';
- Data = StrHexToUintn (PtrPosition);
- Guid->Data2 = (UINT16)Data;
-
- //
- // Data3
- //
- PtrBuffer++;
- PtrPosition = PtrBuffer;
- while (*PtrBuffer != L'\0') {
- if (*PtrBuffer == L'-') {
- break;
- }
- PtrBuffer++;
- }
- if (*PtrBuffer == L'\0') {
- FreePool (Buffer);
- return EFI_NOT_FOUND;
- }
- *PtrBuffer = L'\0';
- Data = StrHexToUintn (PtrPosition);
- Guid->Data3 = (UINT16)Data;
-
- //
- // Data4[0..1]
- //
- for ( Index = 0 ; Index < 2 ; Index++) {
- PtrBuffer++;
- if ((*PtrBuffer == L'\0') || ( *(PtrBuffer + 1) == L'\0')) {
- FreePool (Buffer);
- return EFI_NOT_FOUND;
- }
- Digits[0] = *PtrBuffer;
- PtrBuffer++;
- Digits[1] = *PtrBuffer;
- Digits[2] = L'\0';
- Data = StrHexToUintn (Digits);
- Guid->Data4[Index] = (UINT8)Data;
- }
-
- //
- // skip the '-'
- //
- PtrBuffer++;
- if ((*PtrBuffer != L'-' ) || ( *PtrBuffer == L'\0')) {
- return EFI_NOT_FOUND;
- }
-
- //
- // Data4[2..7]
- //
- for ( ; Index < 8; Index++) {
- PtrBuffer++;
- if ((*PtrBuffer == L'\0') || ( *(PtrBuffer + 1) == L'\0')) {
- FreePool (Buffer);
- return EFI_NOT_FOUND;
- }
- Digits[0] = *PtrBuffer;
- PtrBuffer++;
- Digits[1] = *PtrBuffer;
- Digits[2] = L'\0';
- Data = StrHexToUintn (Digits);
- Guid->Data4[Index] = (UINT8)Data;
- }
-
- FreePool (Buffer);
-
- return EFI_SUCCESS;
-}
-
/**
Worker function that prints an EFI_GUID into specified Buffer.
--
2.9.0.windows.1
next prev parent reply other threads:[~2017-02-22 4:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-22 4:50 [PATCH 00/11] Add StrToGuid/HexToBytes/Ipv4/Ipv6 in BaseLib Ruiyu Ni
2017-02-22 4:50 ` [PATCH 01/11] MdePkg: Define IPv4_ADDRESS and IPv6_ADDRESS in Base.h Ruiyu Ni
2017-02-22 4:50 ` [PATCH 02/11] MdePkg/UefiDevicePathLib: Rename StrToGuid to avoid link failure Ruiyu Ni
2017-02-22 4:50 ` [PATCH 03/11] SignedCapsulePkg/IniParsing: " Ruiyu Ni
2017-02-22 4:50 ` [PATCH 04/11] MdePkg/BaseLib: Add StrToGuid/StrHexToBytes/StrToIpv[4/6]Address Ruiyu Ni
2017-02-22 6:02 ` Yao, Jiewen
2017-02-22 7:58 ` Ni, Ruiyu
2017-02-22 8:14 ` Yao, Jiewen
2017-02-22 4:50 ` [PATCH 05/11] MdePkg/BaseLib: Add AsciiStrToGuid/HexToBytes/ToIpv[4/6]Address Ruiyu Ni
2017-02-22 4:50 ` [PATCH 06/11] MdePkg/UefiDevicePathLib: Use BaseLib string conversion services Ruiyu Ni
2017-02-22 4:50 ` [PATCH 07/11] MdeModulePkg/CapsuleApp: Use StrToGuid in BaseLib Ruiyu Ni
2017-02-22 4:50 ` Ruiyu Ni [this message]
2017-02-22 4:50 ` [PATCH 09/11] ShellPkg/Debug1CommandLib: Use StrToGuid/StrHexToBytes " Ruiyu Ni
2017-02-22 4:50 ` [PATCH 10/11] SignedCapsulePkg/IniParsingLib: Use AsciiStrToGuid " Ruiyu Ni
2017-02-22 5:28 ` Yao, Jiewen
2017-02-22 7:40 ` Ni, Ruiyu
2017-02-22 4:50 ` [PATCH 11/11] MdeModulePkg/NetLib: Use StrToIpv4/6Address " Ruiyu Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170222045047.558308-9-ruiyu.ni@intel.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox