From: Jeremy Linton <jeremy.linton@arm.com>
To: edk2-devel@lists.01.org
Cc: leif.lindholm@linaro.org, ryan.harkin@linaro.org,
linaro-uefi@lists.linaro.org, ard.biesheuvel@linaro.org,
Steve.Capper@arm.com, Jeremy Linton <jeremy.linton@arm.com>
Subject: [PATCH v3 0/7] ATAPI support on SiI SATA adapter
Date: Thu, 23 Feb 2017 16:33:47 -0600 [thread overview]
Message-ID: <20170223223355.11383-1-jeremy.linton@arm.com> (raw)
The SiI isn't an AHCI compatible adapter so it implements the EFI ATA
pass-through protocol directly. This works for fixed hard drives, but
not ATAPI attached devices (CDROM, DVDROM, TAPE, etc).
This patch adds read only ATAPI support via the EFI SCSI pass-through
protocol, allowing boot from attached CD/DVD. This patch also cleans
up, and tweaks recovery paths/etc in the original driver. When
combined with the ARM/PCI dma lib changes this allows us to relax the
IO alignment requirement that caused grub failures.
Finally, the OpenPlatformPkg/Juno must be updated, with another patch
to avoid build breaks now that the SiI has a dependency on the SCSI
libraries.
V2->V3:
Send the correct patch, rather than the one I was running
the patch checker against.
V1->V2:
Formatting corrections per Ard's comments and Daniil's
updated patch checker.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Jeremy Linton (7):
EmbeddedPkg: SiI3132: Note that ARM is using this Dxe
MdePkg IndustryStandard/Scsi.h: Add sense code macro
EmbeddedPkg: SiI3132: Add ScsiProtocol callbacks
EmbeddedPkg: SiI3132: Add SCSI protocol support to header
EmbeddedPkg: SiI3132: Break out FIS command submission
EmbeddedPkg: SiI3132: Cleanup device node creation
EmbeddedPkg: SiI3132: Enable SCSI pass-through protocol
EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132.c | 49 ++-
EmbeddedPkg/Drivers/SataSiI3132Dxe/SataSiI3132.h | 93 ++++-
.../Drivers/SataSiI3132Dxe/SataSiI3132Dxe.inf | 2 +
.../Drivers/SataSiI3132Dxe/SiI3132AtaPassThru.c | 268 ++++++++-----
.../Drivers/SataSiI3132Dxe/SiI3132ScsiPassThru.c | 431 +++++++++++++++++++++
MdeModulePkg/Bus/Ata/AtaBusDxe/AtaBusDxe.inf | 2 +-
MdePkg/Include/IndustryStandard/Scsi.h | 2 +
OpenPlatformPkg | 2 +-
8 files changed, 721 insertions(+), 128 deletions(-)
create mode 100644 EmbeddedPkg/Drivers/SataSiI3132Dxe/SiI3132ScsiPassThru.c
--
2.9.3
next reply other threads:[~2017-02-23 22:33 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-23 22:33 Jeremy Linton [this message]
2017-02-23 22:33 ` [PATCH v3 1/7] EmbeddedPkg: SiI3132: Note that ARM is using this Dxe Jeremy Linton
2017-02-23 22:33 ` [PATCH v3 2/7] MdePkg IndustryStandard/Scsi.h: Add sense code macro Jeremy Linton
2017-02-24 6:42 ` Tian, Feng
2017-02-24 18:23 ` Jeremy Linton
2017-02-23 22:33 ` [PATCH v3 3/7] EmbeddedPkg: SiI3132: Add ScsiProtocol callbacks Jeremy Linton
2017-02-24 17:08 ` Ard Biesheuvel
2017-03-03 1:05 ` Jeremy Linton
2017-02-23 22:33 ` [PATCH v3 4/7] EmbeddedPkg: SiI3132: Add SCSI protocol support to header Jeremy Linton
2017-02-24 17:09 ` Ard Biesheuvel
2017-02-23 22:33 ` [PATCH v3 5/7] EmbeddedPkg: SiI3132: Break out FIS command submission Jeremy Linton
2017-02-23 22:33 ` [PATCH v3 6/7] EmbeddedPkg: SiI3132: Cleanup device node creation Jeremy Linton
2017-02-23 22:33 ` [PATCH v3 7/7] EmbeddedPkg: SiI3132: Enable SCSI pass-through protocol Jeremy Linton
2017-02-23 22:33 ` [PATCH] Platforms/ARM/Juno: Add " Jeremy Linton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170223223355.11383-1-jeremy.linton@arm.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox