From: Laszlo Ersek <lersek@redhat.com>
To: edk2-devel-01 <edk2-devel@lists.01.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Leif Lindholm <leif.lindholm@linaro.org>
Subject: [PATCH v3 09/12] ArmVirtPkg: enable AcpiTableDxe and EFI_ACPI_TABLE_PROTOCOL dynamically
Date: Fri, 24 Mar 2017 23:38:16 +0100 [thread overview]
Message-ID: <20170324223819.11377-10-lersek@redhat.com> (raw)
In-Reply-To: <20170324223819.11377-1-lersek@redhat.com>
In this patch, the ACPI protocol / driver chain is enabled dynamically,
when appropriate. This is being done in one larger patch, because
ArmVirt.dsc.inc, where AcpiTableDxe is built, is used by all the platform
DSCs.
No change in behavior should be observable after this patch on any
ArmVirtPkg platform.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
---
Notes:
v3:
- don't enable dynamism for 32-bit (ARM) [Ard]
ArmVirtPkg/ArmVirt.dsc.inc | 9 ++++++++-
ArmVirtPkg/ArmVirtQemu.dsc | 1 +
ArmVirtPkg/ArmVirtQemuKernel.dsc | 1 +
ArmVirtPkg/ArmVirtXen.dsc | 1 +
ArmVirtPkg/ArmVirtXen.fdf | 1 +
ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc | 1 +
6 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/ArmVirtPkg/ArmVirt.dsc.inc b/ArmVirtPkg/ArmVirt.dsc.inc
index f61fd0680612..90ab97c240a1 100644
--- a/ArmVirtPkg/ArmVirt.dsc.inc
+++ b/ArmVirtPkg/ArmVirt.dsc.inc
@@ -443,5 +443,12 @@ [Components.AARCH64]
#
# ACPI Support
#
- MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
+ MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf {
+ <LibraryClasses>
+ NULL|ArmPkg/Library/PlatformHasAcpiLib/PlatformHasAcpiLib.inf
+ }
+
+ #
+ # EBC support
+ #
MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
diff --git a/ArmVirtPkg/ArmVirtQemu.dsc b/ArmVirtPkg/ArmVirtQemu.dsc
index 4b556f309a6c..c2427a6fcea2 100644
--- a/ArmVirtPkg/ArmVirtQemu.dsc
+++ b/ArmVirtPkg/ArmVirtQemu.dsc
@@ -382,6 +382,7 @@ [Components.AARCH64]
#
# ACPI Support
#
+ ArmVirtPkg/PlatformHasAcpiDtDxe/PlatformHasAcpiDtDxe.inf
MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf {
<LibraryClasses>
diff --git a/ArmVirtPkg/ArmVirtQemuKernel.dsc b/ArmVirtPkg/ArmVirtQemuKernel.dsc
index 6b6555c889a3..c7317a056c0e 100644
--- a/ArmVirtPkg/ArmVirtQemuKernel.dsc
+++ b/ArmVirtPkg/ArmVirtQemuKernel.dsc
@@ -371,6 +371,7 @@ [Components.AARCH64]
#
# ACPI Support
#
+ ArmVirtPkg/PlatformHasAcpiDtDxe/PlatformHasAcpiDtDxe.inf
MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf {
<LibraryClasses>
diff --git a/ArmVirtPkg/ArmVirtXen.dsc b/ArmVirtPkg/ArmVirtXen.dsc
index 3422d1e5d996..679ca67ffa0f 100644
--- a/ArmVirtPkg/ArmVirtXen.dsc
+++ b/ArmVirtPkg/ArmVirtXen.dsc
@@ -222,5 +222,6 @@ [Components.common]
# ACPI support
#
!if $(ARCH) == AARCH64
+ ArmVirtPkg/XenPlatformHasAcpiDtDxe/XenPlatformHasAcpiDtDxe.inf
ArmVirtPkg/XenAcpiPlatformDxe/XenAcpiPlatformDxe.inf
!endif
diff --git a/ArmVirtPkg/ArmVirtXen.fdf b/ArmVirtPkg/ArmVirtXen.fdf
index c997251b12b8..aaae9755cd53 100644
--- a/ArmVirtPkg/ArmVirtXen.fdf
+++ b/ArmVirtPkg/ArmVirtXen.fdf
@@ -184,6 +184,7 @@ [FV.FvMain]
# ACPI support
#
!if $(ARCH) == AARCH64
+ INF ArmVirtPkg/XenPlatformHasAcpiDtDxe/XenPlatformHasAcpiDtDxe.inf
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
INF ArmVirtPkg/XenAcpiPlatformDxe/XenAcpiPlatformDxe.inf
diff --git a/ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc b/ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc
index cc5d12aaefea..b4381132c864 100644
--- a/ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc
+++ b/ArmVirtPkg/ArmVirtQemuFvMain.fdf.inc
@@ -144,6 +144,7 @@ [FV.FvMain]
#
# ACPI Support
#
+ INF ArmVirtPkg/PlatformHasAcpiDtDxe/PlatformHasAcpiDtDxe.inf
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
INF MdeModulePkg/Universal/Acpi/BootGraphicsResourceTableDxe/BootGraphicsResourceTableDxe.inf
INF OvmfPkg/AcpiPlatformDxe/QemuFwCfgAcpiPlatformDxe.inf
--
2.9.3
next prev parent reply other threads:[~2017-03-24 22:38 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-24 22:38 [PATCH v3 00/12] ArmVirtPkg: don't forward the DT to the OS if QEMU provides ACPI Laszlo Ersek
2017-03-24 22:38 ` [PATCH v3 01/12] Revert "ArmVirtPkg/FdtClientDxe: make DT table installation !ACPI dependent" Laszlo Ersek
2017-03-24 22:38 ` [PATCH v3 02/12] Revert "ArmVirtPkg/FdtClientDxe: install DT configuration table at ReadyToBoot" Laszlo Ersek
2017-03-24 22:38 ` [PATCH v3 03/12] ArmVirtPkg/XenAcpiPlatformDxe: don't cast UINT64 to pointer directly Laszlo Ersek
2017-03-24 22:38 ` [PATCH v3 04/12] MdeModulePkg: introduce EDKII Platform Has ACPI GUID Laszlo Ersek
2017-03-24 22:41 ` Ard Biesheuvel
2017-03-28 8:20 ` Laszlo Ersek
2017-03-24 22:38 ` [PATCH v3 05/12] ArmPkg: introduce PlatformHasAcpiLib Laszlo Ersek
2017-03-24 22:42 ` Ard Biesheuvel
2017-03-24 22:38 ` [PATCH v3 06/12] EmbeddedPkg: introduce EDKII Platform Has Device Tree GUID Laszlo Ersek
2017-03-24 22:42 ` Ard Biesheuvel
2017-03-24 22:38 ` [PATCH v3 07/12] ArmVirtPkg: add PlatformHasAcpiDtDxe Laszlo Ersek
2017-03-24 22:38 ` [PATCH v3 08/12] ArmVirtPkg: add XenPlatformHasAcpiDtDxe Laszlo Ersek
2017-03-24 22:38 ` Laszlo Ersek [this message]
2017-03-24 22:43 ` [PATCH v3 09/12] ArmVirtPkg: enable AcpiTableDxe and EFI_ACPI_TABLE_PROTOCOL dynamically Ard Biesheuvel
2017-03-24 22:38 ` [PATCH v3 10/12] ArmVirtPkg/FdtClientDxe: install DT as sysconfig table in protocol notify Laszlo Ersek
2017-03-24 22:38 ` [PATCH v3 11/12] ArmVirtPkg/PlatformHasAcpiDtDxe: don't expose DT if QEMU provides ACPI Laszlo Ersek
2017-03-24 22:38 ` [PATCH v3 12/12] ArmVirtPkg: remove PURE_ACPI_BOOT_ENABLE and PcdPureAcpiBoot Laszlo Ersek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-list from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170324223819.11377-10-lersek@redhat.com \
--to=devel@edk2.groups.io \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox